+ All Categories
Home > Documents > 35 B PowerPK42 Brochure (log in to view)€¦ · LOG IN. Title: 35 B PowerPK42 Brochure (log in to...

35 B PowerPK42 Brochure (log in to view)€¦ · LOG IN. Title: 35 B PowerPK42 Brochure (log in to...

Date post: 14-Aug-2020
Category:
Upload: others
View: 4 times
Download: 0 times
Share this document with a friend
1
PowerPK P K POWERPK RATE FOR FOLIAR APPLICATION PowerPK (L/ha) P (kg) K (kg) Optimum Water Rate (L/L of PowerPK)* 50x to 100x Water Rate (L/ha) PowerPK (L/ha) Density (g/mL) pH SG 1.55 7.43 ANALYSIS POWERPK RATE FOR FERTIGATION PowerPK can be used at 2 to 5 L /10,000 L (1mm of irrigation) per ha; (e.g. 10 to 25 L /ha for 5mm of irrigation). PowerPK can be mixed with UAN in the following order and ratio: FIRST; Water 10 parts SECOND; UAN 15 parts THIRD; PowerPK 5 parts Benefits Nutrient G/L w/v% Phosphorus Potassium Citrate 100 1L 0.1 0.35 5L 0.5 1.75 10,000 2 to 5 50,000 10 to 25 10 35 28 P PowerPK is a highly concentrated potassium and phosphorus product with a near neutral pH and free of chloride and sulphate. The product is manufactured to supply phosphorus and potassium as foliar or through the soil as in injection and fertigation. As potassium and phosphorus are highly beneficial for flower induction and fruit growth, PowerPK has the most impact on productivity and return when used during reproductive phase of crop growth. PowerPK can be easily mixed with UAN and urea for foliar spraying, its high citric acid content makes it highly suitable for foliar tank mixes. Citric acid as foliar and more so through the soil can release/ recover soil-bound phosphorus and trace elements for crop use. High Concentration Phosphorus and Potassium Liquid for Injection, Fertigation and Foliar Application Mix With Nitrogen Contact Us Global +61 8 9334 8700 Australia 1800 753 000 Email [email protected] Optimum dilution range for foliar application is 50X to 100X per L of PowerPK * Water rate should be adjusted to suit spraying conditions; higher water rates are best suited for dry winter or spring conditions and summer foliar applications; lower water rates should be used for optimum foliar uptake when leaf surfaces are “dewy” (e.g. damp winter and spring conditions). Concentrated liquid form of potassium and phosphate Potassium source free of chloride Potassium source free of sulphate Continuous use does not add to soil salinity Continuous use does not add to soil water stress Citric acid component feeds soil bacteria Citric acid component unlocks phosphorus and trace elements in alkaline soil Crop benefits from chelating properties of Citric acid www.powerpk.info www.ruralliquidfertilisers.com Trust. Grow. Yield. Member Login Please login to be able to view this detail Not a member yet? Register Here LOG IN
Transcript
Page 1: 35 B PowerPK42 Brochure (log in to view)€¦ · LOG IN. Title: 35 B PowerPK42 Brochure (log in to view) Created Date: 10/7/2016 10:46:35 AM ...

PowerPK P KPOWERPK RATE FOR FOLIAR APPLICATION

PowerPK (L/ha)

P (kg)

K (kg)

Optimum Water Rate (L/L of PowerPK)* 50x to 100x

Water Rate (L/ha)

PowerPK (L/ha)

Density (g/mL)

pH

SG 1.55

7.43

ANALYSIS

POWERPK RATE FOR FERTIGATION

PowerPK can be used at 2 to 5 L /10,000 L (1mm of irrigation) per ha; (e.g. 10 to 25 L /ha for 5mm of irrigation).

PowerPK can be mixed with UAN in the following order and ratio:

FIRST; Water 10 partsSECOND; UAN 15 partsTHIRD; PowerPK 5 parts

Benefits

Nutrient G/L w/v%

Phosphorus

Potassium

Citrate

100

350

280

1L

0.1

0.35

5L

0.5

1.75

10,000

2 to 5

50,000

10 to 25

10

35

28

P

K

PowerPK is a highly concentrated

potassium and phosphorus product with a

near neutral pH and free of chloride and

sulphate. The product is manufactured to

supply phosphorus and potassium as

foliar or through the soil as in injection

and fertigation.

As potassium and phosphorus are highly

beneficial for flower induction and fruit

growth, PowerPK has the most impact on

productivity and return when used during

reproductive phase of crop growth.

PowerPK can be easily mixed with UAN

and urea for foliar spraying, its high citric

acid content makes it highly suitable for

foliar tank mixes. Citric acid as foliar and

more so through the soil can release/

recover soil-bound phosphorus and trace

elements for crop use.

High Concentration Phosphorus and Potassium Liquid for Injection, Fertigation and Foliar Application

Mix With Nitrogen

Contact Us

Global +61 8 9334 8700Australia 1800 753 000Email [email protected]

Optimum dilution range for foliar application is 50X to 100X per L of PowerPK

* Water rate should be adjusted to suit spraying conditions; higher water rates are best suited for dry winter or spring conditions and summer foliar applications; lower water rates should be used for optimum foliar uptake when leaf surfaces are “dewy” (e.g. damp winter and spring conditions).

Concentrated liquid form of potassium and phosphate

Potassium source free of chloride

Potassium source free of sulphate

Continuous use does not add to soil salinity

Continuous use does not add to soil water stress

Citric acid component feeds soil bacteria

Citric acid component unlocks phosphorus and trace elements in alkaline soil

Crop benefits from chelating properties of Citric acid

www.powerpk.info www.ruralliquidfertilisers.com Trust. Grow. Yield.

Member LoginPlease login to be able to view this detail

Not a member yet?Register Here LOG IN

Recommended