6
www.shelbourne.com 5m Reach 350 Fixed Frame Model 450 Power Slew Model Parallel Arm Geometry 1.2m Belt Drive Head 350 & 450 Hedgecutter
| Date post: | 12-Mar-2016 |
| Category: |
Documents |
| Upload: | shelbourne-reynolds |
| View: | 215 times |
| Download: | 0 times |
www.shelbourne.comwww.shelbourne.com
350 & 450 HedgecutterTechnical Data
5m Reach
350 Fixed Frame Model
450 Power Slew Model
Parallel Arm Geometry
1.2m Belt Drive Head
350 & 450 Hedgecutter
Technical Specifications
CONTROLS:Progressive Cable Control
HYDRAULICS:Standard Power Oil Capacity Independent Hydraulics
170 litres Standard
170 litres Standard
Standard StandardOil Remote Joystick Control Optional Optional
ARM FEATURES:Parallel Boom Geometry Boom TypeHydraulic SlewArm Break Back
StandardFixedFixed
StandardStandard
StandardFixed
900
StandardStandardHead Float
350 450 Technical Specifications
FLAIL HEAD FEATURES:
Twin ‘v’ Belt Head System Standard Standard
1.2m Head Standard Standard
Drive System Flow 75 I/min 75 I/min
Drive System Pressure 250 bar 250 bar
Head Angling 2570 2570
Hydraulic Roller Optional Optional
350 450
Roller Diameter 101mm 101mm
Technical Specifications
Reach Dimensions
WEIGHTS:Machine Weight inc Head & Oil 1130kgMin Tractor Weight 3250kgMin Tractor 75hp
MOUNTING SYSTEM:3pt Mounting Optional
5.16mt4.54mt6.25mt4.52mt3.30mt5.35mt2.35mt1.40mt1.55mt
5.16mt4.54mt6.25mt4.52mt3.30mt5.35mt2.35mt1.40mt1.55mt
Max Reach (A) Head HorizontalMax Reach (B) Head VerticalMax Height (C) Head VerticalMax Height (D) Head Horizontal Max Reach (E) Head DownwardsMax Reach (F) At 450 UpMin Siding Width (G) To TankMin Siding Width (H) To CentreHeight (I) To Pivot
Axle Mounting Optional
350
1190kg3500kg80hp
Optional
ACCESSORIES:Road Lights Optional Optional
Optional
450
350 450
All dimensions above with 1.2mt head
C
F
D
AB
E H
G
I450
450 In Transport Position 350 In Transport Position
The only difference between the 350 and 450 series machines is that the 350 is a fixed side orientated machine
whereas the 450 is a Powerslew machine. Both machines are 5m reach and have been designed with quality
and strength in mind with similar styling to their HD range siblings. Weight has been saved where possible
without sacrificing strength to give a total weight including oil of 1190kg on the 450 and 1130kg on the
350. Still light enough to be compatible with smaller tractors but strong enough to do a hard days work.
The reputation of the 700 series HD Shelbourne range hasbeen steadily growing with larger farmers and contractors sinceit’s introduction in 2005. The 350 and 450 series machines aresolidly built entry level machines capable of consistent reliableperformance for both farmers and local authorities.
www.shelbourne.com
• Both machines are 5m reach
• 350: Fixed Frame
• 450: Power Slew
• Standard twin pump 50hp hydraulics
with 170 litre oil tank capacity
• Standard parallel boom geometry
• Standard 1.2m belt drive head
• Standard double skinned head
• Standard 4” bolted position head roller
• Standard cable controls with easy fit
armrest control
Standard Features
The new machines have been designed with quality and strength in mind with similar styling to their HD range siblings
Optional Features
• Hydraulic head roller
• Oil proportional joystick control
• Road lighting kit
• Float kits
Both machines are 3 point linkage mounted with the aid of an easy to fit stabiliser kit. As with all other
Shelbourne hedge trimmers the new 350 and 450 are fully assembled at the factory, run up and tested
at operating temperature and delivered to the dealer ready for work.
350 Breakback
450 Joystick
Hydraulic Roller & Drive
Cable Controls
Fixed Roller
350 & 450 Hedgecutter
3pt Stabilizer
The only difference between the 350 and 450 series machines is that the 350 is a fixed side orientated machine
whereas the 450 is a Powerslew machine. Both machines are 5m reach and have been designed with quality
and strength in mind with similar styling to their HD range siblings. Weight has been saved where possible
without sacrificing strength to give a total weight including oil of 1190kg on the 450 and 1130kg on the
350. Still light enough to be compatible with smaller tractors but strong enough to do a hard days work.
The reputation of the 700 series HD Shelbourne range hasbeen steadily growing with larger farmers and contractors sinceit’s introduction in 2005. The 350 and 450 series machines aresolidly built entry level machines capable of consistent reliableperformance for both farmers and local authorities.
www.shelbourne.com
• Both machines are 5m reach
• 350: Fixed Frame
• 450: Power Slew
• Standard twin pump 50hp hydraulics
with 170 litre oil tank capacity
• Standard parallel boom geometry
• Standard 1.2m belt drive head
• Standard double skinned head
• Standard 4” bolted position head roller
• Standard cable controls with easy fit
armrest control
Standard Features
The new machines have been designed with quality and strength in mind with similar styling to their HD range siblings
Optional Features
• Hydraulic head roller
• Oil proportional joystick control
• Road lighting kit
• Float kits
Both machines are 3 point linkage mounted with the aid of an easy to fit stabiliser kit. As with all other
Shelbourne hedge trimmers the new 350 and 450 are fully assembled at the factory, run up and tested
at operating temperature and delivered to the dealer ready for work.
350 Breakback
450 Joystick
Hydraulic Roller & Drive
Cable Controls
Fixed Roller
350 & 450 Hedgecutter
3pt Stabilizer
The only difference between the 350 and 450 series machines is that the 350 is a fixed side orientated machine
whereas the 450 is a Powerslew machine. Both machines are 5m reach and have been designed with quality
and strength in mind with similar styling to their HD range siblings. Weight has been saved where possible
without sacrificing strength to give a total weight including oil of 1190kg on the 450 and 1130kg on the
350. Still light enough to be compatible with smaller tractors but strong enough to do a hard days work.
The reputation of the 700 series HD Shelbourne range hasbeen steadily growing with larger farmers and contractors sinceit’s introduction in 2005. The 350 and 450 series machines aresolidly built entry level machines capable of consistent reliableperformance for both farmers and local authorities.
www.shelbourne.com
• Both machines are 5m reach
• 350: Fixed Frame
• 450: Power Slew
• Standard twin pump 50hp hydraulics
with 170 litre oil tank capacity
• Standard parallel boom geometry
• Standard 1.2m belt drive head
• Standard double skinned head
• Standard 4” bolted position head roller
• Standard cable controls with easy fit
armrest control
Standard Features
The new machines have been designed with quality and strength in mind with similar styling to their HD range siblings
Optional Features
• Hydraulic head roller
• Oil proportional joystick control
• Road lighting kit
• Float kits
Both machines are 3 point linkage mounted with the aid of an easy to fit stabiliser kit. As with all other
Shelbourne hedge trimmers the new 350 and 450 are fully assembled at the factory, run up and tested
at operating temperature and delivered to the dealer ready for work.
350 Breakback
450 Joystick
Hydraulic Roller & Drive
Cable Controls
Fixed Roller
350 & 450 Hedgecutter
3pt Stabilizer
www.shelbourne.comwww.shelbourne.com
350 & 450 HedgecutterTechnical Data
5m Reach
350 Fixed Frame Model
450 Power Slew Model
Parallel Arm Geometry
1.2m Belt Drive Head
350 & 450 Hedgecutter
Technical Specifications
CONTROLS:Progressive Cable Control
HYDRAULICS:Standard Power Oil Capacity Independent Hydraulics
170 litres Standard
170 litres Standard
Standard StandardOil Remote Joystick Control Optional Optional
ARM FEATURES:Parallel Boom Geometry Boom TypeHydraulic SlewArm Break Back
StandardFixedFixed
StandardStandard
StandardFixed
900
StandardStandardHead Float
350 450 Technical Specifications
FLAIL HEAD FEATURES:
Twin ‘v’ Belt Head System Standard Standard
1.2m Head Standard Standard
Drive System Flow 75 I/min 75 I/min
Drive System Pressure 250 bar 250 bar
Head Angling 2570 2570
Hydraulic Roller Optional Optional
350 450
Roller Diameter 101mm 101mm
Technical Specifications
Reach Dimensions
WEIGHTS:Machine Weight inc Head & Oil 1130kgMin Tractor Weight 3250kgMin Tractor 75hp
MOUNTING SYSTEM:3pt Mounting Optional
5.16mt4.54mt6.25mt4.52mt3.30mt5.35mt2.35mt1.40mt1.55mt
5.16mt4.54mt6.25mt4.52mt3.30mt5.35mt2.35mt1.40mt1.55mt
Max Reach (A) Head HorizontalMax Reach (B) Head VerticalMax Height (C) Head VerticalMax Height (D) Head Horizontal Max Reach (E) Head DownwardsMax Reach (F) At 450 UpMin Siding Width (G) To TankMin Siding Width (H) To CentreHeight (I) To Pivot
Axle Mounting Optional
350
1190kg3500kg80hp
Optional
ACCESSORIES:Road Lights Optional Optional
Optional
450
350 450
All dimensions above with 1.2mt head
C
F
D
AB
E H
G
I450
450 In Transport Position 350 In Transport Position
www.shelbourne.comwww.shelbourne.com
350 & 450 HedgecutterTechnical Data
5m Reach
350 Fixed Frame Model
450 Power Slew Model
Parallel Arm Geometry
1.2m Belt Drive Head
350 & 450 Hedgecutter
Technical Specifications
CONTROLS:Progressive Cable Control
HYDRAULICS:Standard Power Oil Capacity Independent Hydraulics
170 litres Standard
170 litres Standard
Standard StandardOil Remote Joystick Control Optional Optional
ARM FEATURES:Parallel Boom Geometry Boom TypeHydraulic SlewArm Break Back
StandardFixedFixed
StandardStandard
StandardFixed
900
StandardStandardHead Float
350 450 Technical Specifications
FLAIL HEAD FEATURES:
Twin ‘v’ Belt Head System Standard Standard
1.2m Head Standard Standard
Drive System Flow 75 I/min 75 I/min
Drive System Pressure 250 bar 250 bar
Head Angling 2570 2570
Hydraulic Roller Optional Optional
350 450
Roller Diameter 101mm 101mm
Technical Specifications
Reach Dimensions
WEIGHTS:Machine Weight inc Head & Oil 1130kgMin Tractor Weight 3250kgMin Tractor 75hp
MOUNTING SYSTEM:3pt Mounting Optional
5.16mt4.54mt6.25mt4.52mt3.30mt5.35mt2.35mt1.40mt1.55mt
5.16mt4.54mt6.25mt4.52mt3.30mt5.35mt2.35mt1.40mt1.55mt
Max Reach (A) Head HorizontalMax Reach (B) Head VerticalMax Height (C) Head VerticalMax Height (D) Head Horizontal Max Reach (E) Head DownwardsMax Reach (F) At 450 UpMin Siding Width (G) To TankMin Siding Width (H) To CentreHeight (I) To Pivot
Axle Mounting Optional
350
1190kg3500kg80hp
Optional
ACCESSORIES:Road Lights Optional Optional
Optional
450
350 450
All dimensions above with 1.2mt head
C
F
D
AB
E H
G
I450
450 In Transport Position 350 In Transport Position
