of 280
8/13/2019 36521-1-930_s00-s08
1/280
3GPP TS 36.521-1 V9.3.0 (2010-12)
3rd Generation Partnership Project;Technical Specification Group Radio Access Network;Evolved Universal Terrestrial Radio Access E!UTRA";
User E#uip$ent UE" confor$ance specification Radiotrans$ission and reception
Part %& 'onfor$ance Testin(;Release )"
The present document has been developed within the 3rdGeneration Partnership Project (3GPPTM) and may be further elaborated for the purposes of 3GPP.
The present document has not been subject to any approval process by the 3GPP Orani!ational Partners and shall not be implemented.
This "pecification is provided for future development wor# within 3GPP only. The Orani!ational Partners accept no liability for any use of this"pecification.
"pecifications and reports for implementation of the 3GPPTMsystem should be obtained via the 3GPP Orani!ational Partners$ Publications Offices.
8/13/2019 36521-1-930_s00-s08
2/2803GPP
%eywordsUMTS LTE
3GPP
Postal address
3GPP support office address
650 Route des Lucioles - So!i" #$tiolis
V"l%o$$e - &R#'ETel. *33 + 92 9+ +2 00 &", *33 + 93 65 + 16
&nternet
!tt///.3.o
Copyright Notification
'o part may be reproduced ecept as authori!ed by written permission.
The copyriht and the foreoin restriction etend to reproduction in all media.
*+,+- 3GPP Orani!ational Partners (/&0- T&"- 11"- 2T"&- TT- TT1).
ll rihts reserved.
MT"4 is a Trade Mar# of 2T"& reistered for the benefit of its members
3GPP4 is a Trade Mar# of 2T"& reistered for the benefit of its Members and of the 3GPP Orani!ational Partners
5T24 is a Trade Mar# of 2T"& currently bein reistered for the benefit of its Members and of the 3GPPOrani!ational Partners
G"M6 and the G"M loo are reistered and owned by the G"M ssociation
3GPP TS 3*+,-%!% .)+3+/ -/%/!%-"-Release )
8/13/2019 36521-1-930_s00-s08
3/280
o$te$ts
1ontents....................................................................................................................................................3
7oreword.................................................................................................................................................,8
&ntroduction.............................................................................................................................................,8
, "cope....................................................................................................................................................,9
* /eferences............................................................................................................................................,:
3 ;efinitions- symbols and abbreviations................................................................................................,89.*.>.>.3.* Messae contents eceptions (networ# sinalled value D'"E+>D)..........................................................>8
3GPP
3GPP TS 3*+,-%!% .)+3+/ -/%/!%-"3Release )
8/13/2019 36521-1-930_s00-s08
4/280
9.*.>.>.3.3 Messae contents eceptions (networ# sinalled value D'"E+8F)..........................................................>89.*.>.>.3.> Messae contents eceptions (networ# sinalled value D'"E+9D)..........................................................>8
9.*.>.>.3.8 Messae contents eceptions (networ# sinalled value '"E+:F)..........................................................>99.*.>.>.3.9 Messae contents eceptions (networ# sinalled value '"E+9
9.*.>.>.3.: Messae contents eceptions (networ# sinalled value '"E+=F)..........................................................>99.*.>.>.3.< Messae contents eceptions (networ# sinalled value '"E,+F)..........................................................>9
9.*.>.8 Test re?uirements...........................................................................................................................................>:9.*.8 1onfiured 2 transmitted Output Power........................................................................................................8=
9.*.8., Test purpose...................................................................................................................................................8=9.*.8.* Test applicability.......................................................................................................................................... ..8=
9.*.8.3 Minimum conformance re?uirements.......................................................................................................... ..8=9.*.8.> Test description..............................................................................................................................................9+
9.*.8.>., &nitial conditions..........................................................................................................................................9+9.*.8.>.* Test procedure........................................................................................................................................... ..9,
9.*.8.>.3 Messae contents........................................................................................................................................9,
9.*.8.8 Test re?uirement.............................................................................................................................................9,9.3 Output Power ;ynamics......................................................................................................................................9*
9.3., Boid 9*
9.3.* Minimum Output Power...................................................................................................................................9*
9.3.*., Test purpose...................................................................................................................................................9*9.3.*.* Test applicability.......................................................................................................................................... ..9*9.3.*.3 Minimum conformance re?uirements.......................................................................................................... ..9*
9.3.*.> Test description..............................................................................................................................................939.3.*.>., &nitial conditions..........................................................................................................................................93
9.3.*.>.* Test procedure........................................................................................................................................... ..939.3.*.>.3 Messae contents........................................................................................................................................9>
9.3.*.8 Test re?uirement.............................................................................................................................................9>9.3.3 Transmit O77 power....................................................................................................................................... ..9>
9.3.3., Test purpose...................................................................................................................................................9>9.3.3.* Test applicability.......................................................................................................................................... ..9>
9.3.3.3 Minimum conformance re?uirement..............................................................................................................9>9.3.3.> Test description..............................................................................................................................................98
9.3.3.8 Test re?uirement.............................................................................................................................................989.3.> O'HO77 time mas#......................................................................................................................................... ..98
9.3.>., General O'HO77 time mas#..........................................................................................................................98
9.3.>.,., Test purpose................................................................................................................................................989.3.>.,.* Test applicability....................................................................................................................................... ..98
9.3.>.,.3 Minimum conformance re?uirement...........................................................................................................98
9.3.>.,.> Test description...........................................................................................................................................999.3.>.,.>., &nitial conditions.......................................................................................................................................99
9.3.>.,.>.* Test procedure........................................................................................................................................ ..9:9.3.>.,.>.3 Messae contents.....................................................................................................................................9:
9.3.>.,.8 Test re?uirement..........................................................................................................................................9.* P/1I and "/" time mas#........................................................................................................................ ..9.*., P/1I time mas#.................................................................................................................................... ..9=
9.3.>.*.,., Test purpose.............................................................................................................................................9=9.3.>.*.,.* Test applicability.................................................................................................................................... ..9=9.3.>.*.,.3 Minimum conformance re?uirement........................................................................................................9=
9.3.>.*.,.> Test description........................................................................................................................................9=9.3.>.*.,.>., &nitial conditions....................................................................................................................................9=
9.3.>.*.,.>.* Test procedure..................................................................................................................................... ..:+9.3.>.*.,.>.3 Messae contents..................................................................................................................................:+
9.3.>.*.,.8 Test re?uirement.......................................................................................................................................:+9.3.>.*.* "/" time mas#............................................................................................................................................:,
9.3.>.*.*., Test purpose.............................................................................................................................................:,9.3.>.*.*.* Test applicability.................................................................................................................................... ..:,
9.3.>.*.*.3 Minimum conformance re?uirement........................................................................................................:,
9.3.>.*.*.> Test description........................................................................................................................................:*9.3.>.*.*.>., &nitial conditions....................................................................................................................................:*
9.3.>.*.*.>.* Test procedure..................................................................................................................................... ..:3
9.3.>.*.*.>.3 Messae contents..................................................................................................................................:3
3GPP
3GPP TS 3*+,-%!% .)+3+/ -/%/!%-"0Release )
8/13/2019 36521-1-930_s00-s08
5/280
9.3.>.*.*.8 Test re?uirement.......................................................................................................................................:89.3.8 Power 1ontrol...................................................................................................................................................:8
9.3.8., Power 1ontrol bsolute power tolerance......................................................................................................:89.3.8.,., Test purpose................................................................................................................................................:8
9.3.8.,.* Minimum conformance re?uirement...........................................................................................................:89.3.8.,.3 Test applicability....................................................................................................................................... ..:9
9.3.8.,.> Test description...........................................................................................................................................:99.3.8.,.>., &nitial conditions.......................................................................................................................................:9
9.3.8.,.>.* Test procedure........................................................................................................................................ ..:99.3.8.,.>.3 Messae contents.....................................................................................................................................::
9.3.8.,.8 Test re?uirement..........................................................................................................................................::9.3.8.* Power 1ontrol /elative power tolerance.......................................................................................................:., &nitial conditions.......................................................................................................................................=>
9.3.8.3.>.* Test procedure........................................................................................................................................ ..=89.3.8.3.>.3 Messae contents.....................................................................................................................................=9
9.3.8.3.8 Test re?uirement..........................................................................................................................................=99.> Boid =9
9.8 Transmit sinal ?uality.........................................................................................................................................=99.8., 7re?uency 2rror................................................................................................................................................=:
9.8.,., Test purpose...................................................................................................................................................=:9.8.,.* Test applicability.......................................................................................................................................... ..=:
9.8.,.3 Minimum conformance re?uirements.......................................................................................................... ..=:
9.8.,.> Test description..............................................................................................................................................=:9.8.,.>., &nitial condition...........................................................................................................................................=:
9.8.,.>.* Test procedure........................................................................................................................................... ..=.3 Messae contents........................................................................................................................................==9.8.,.8 Test re?uirement.............................................................................................................................................==
9.8.* Transmit modulation.........................................................................................................................................==9.8.*., 2rror Bector Manitude (2BM).....................................................................................................................==
9.8.*.,., Test Purpose............................................................................................................................................... .==9.8.*.,.* Test applicability....................................................................................................................................... ..==
9.8.*.,.3 Minimum conformance re?uirements....................................................................................................... ..==
9.8.*.,.> Test description.........................................................................................................................................,++9.8.*.,.>., &nitial conditions....................................................................................................................................,++9.8.*.,.>.* Test procedure...................................................................................................................................... ..,+*
9.8.*.,.>.3 Messae contents...................................................................................................................................,+39.8.*.,.8 Test re?uirement........................................................................................................................................,+>
9.8.*., P"1IC2BM with eclusion period................................................................................................ ........,+>9.8.*.,., Test purpose...........................................................................................................................................,+>
9.8.*.,.* Test applicability....................................................................................................................................,+>9.8.*.,.3 Minimum conformance re?uirement......................................................................................................,+>
9.8.*.,.> Test description......................................................................................................................................,+89.8.*.,.>., &nitial conditions..................................................................................................................................,+8
9.8.*.,.>.* Test procedure.....................................................................................................................................,+8
9.8.*.,.8 Test re?uirement.....................................................................................................................................,+99.8.*.* 1arrier lea#ae.............................................................................................................................................,+:
9.8.*.*., Test Purpose............................................................................................................................................. .,+:
9.8.*.*.* Test applicability..................................................................................................................................... ..,+:
3GPP
3GPP TS 3*+,-%!% .)+3+/ -/%/!%-",Release )
8/13/2019 36521-1-930_s00-s08
6/280
9.8.*.*.3 Minimum conformance re?uirements..................................................................................................... ..,+:9.8.*.*.> Test description.........................................................................................................................................,+:
9.8.*.*.>., &nitial conditions.....................................................................................................................................,+:9.8.*.*.>.* Test procedure...................................................................................................................................... ..,+.3 Messae contents...................................................................................................................................,+ Test description.........................................................................................................................................,,+9.8.*.3.>., &nitial conditions.....................................................................................................................................,,+
9.8.*.3.>.* Test procedure...................................................................................................................................... ..,,,9.8.*.3.>.3 Messae contents...................................................................................................................................,,*
9.8.*.3.8 Test re?uirement........................................................................................................................................,,*
9.8.*.> 2BM e?uali!er spectrum flatness................................................................................................................,,39.8.*.>., Test Purpose............................................................................................................................................. .,,3
9.8.*.>.* Test applicability..................................................................................................................................... ..,,3
9.8.*.>.3 Minimum conformance re?uirements..................................................................................................... ..,,>
9.8.*.>.> Test description.........................................................................................................................................,,89.8.*.>.>., &nitial conditions.....................................................................................................................................,,89.8.*.>.>.* Test procedure...................................................................................................................................... ..,,8
9.8.*.>.>.3 Messae contents...................................................................................................................................,,99.8.*.>.8 Test re?uirement........................................................................................................................................,,9
9.9 Output /7 spectrum emissions..........................................................................................................................,,:9.9., Occupied bandwidth........................................................................................................................................,,:
9.9.,., Test purpose.................................................................................................................................................,,:9.9.,.* Test applicability........................................................................................................................................ ..,,:
9.9.,.* Minimum conformance re?uirements........................................................................................................ ..,,:9.9.,.> Test description............................................................................................................................................,,., &nitial conditions........................................................................................................................................,,.* Test procedure......................................................................................................................................... ..,,=
9.9.,.>.3 Messae contents......................................................................................................................................,,=9.9.,.8 Test re?uirement...........................................................................................................................................,,=
9.9.* Out of band emission......................................................................................................................................,,=
9.9.*., "pectrum 2mission Mas#.............................................................................................................................,,=9.9.*.,., Test purpose..............................................................................................................................................,,=
9.9.*.,.* Test applicability ......................................................................................................................................,,=
9.9.*.,.3 Minimum conformance re?uirements..................................................................................................... ..,*+9.9.*.,.> Test description.........................................................................................................................................,*+
9.9.*.,.>., &nitial conditions.....................................................................................................................................,*+9.9.*.,.>.* Test procedure...................................................................................................................................... ..,**
9.9.*.,.>.3 Messae contents...................................................................................................................................,**9.9.*.,.8 Test re?uirements......................................................................................................................................,**
9.9.*.* dditional "pectrum 2mission Mas#...........................................................................................................,**
9.9.*.*., Test purpose..............................................................................................................................................,**9.9.*.*.* Test applicability..................................................................................................................................... ..,*39.9.*.*.3 Minimum conformance re?uirements..................................................................................................... ..,*3
9.9.*.*.3., Minimum re?uirement (networ# sinalled value D'"E+3D)........................................................... .......,*39.9.*.*.3.* Minimum re?uirement (networ# sinalled value D'"E+>D)........................................................... .......,*3
9.9.*.*.3.3 Minimum re?uirement (networ# sinalled value D'"E+9D or '"E+:)................................................. .,*>9.9.*.*.> Test description.........................................................................................................................................,*>
9.9.*.*.>., &nitial conditions.....................................................................................................................................,*>9.9.*.*.>.* Test procedure...................................................................................................................................... ..,*=
9.9.*.*.>.3 Messae contents...................................................................................................................................,*=9.9.*.*.>.3., Messae contents eceptions (networ# sinalled value D'"E+3D).....................................................,*=
9.9.*.*.>.3.* Messae contents eceptions (networ# sinalled value D'"E+>D).....................................................,*=
9.9.*.*.>.3.3 Messae contents eceptions (networ# sinalled value D'"E+9D).....................................................,*=9.9.*.*.>.3.> Messae contents eceptions (networ# sinalled value D'"E+:D).....................................................,3+
9.9.*.*.8 Test re?uirements......................................................................................................................................,3+
9.9.*.*.8., Test re?uirements (networ# sinalled value D'"E+3D)..........................................................................,3+
3GPP
3GPP TS 3*+,-%!% .)+3+/ -/%/!%-"*Release )
8/13/2019 36521-1-930_s00-s08
7/280
9.9.*.*.8.* Test re?uirements (networ# sinalled value D'"E+>D)..........................................................................,3+9.9.*.*.8.3Test re?uirements (networ# sinalled value D'"E+9D or '"E+:F).......................................................,3,
9.9.*.3 djacent 1hannel 5ea#ae power /atio......................................................................................................,3*9.9.*.3., Test purpose..............................................................................................................................................,3*
9.9.*.3.* Test applicability..................................................................................................................................... ..,3*9.9.*.3.3 Minimum conformance re?uirements..................................................................................................... ..,3*
9.9.*.3.3., Minimum conformance re?uirements for 2CT/...............................................................................,3*9.9.*.3.3.* Minimum conformance re?uirements for T/......................................................................... ........,33
9.9.*.3.> Test description.........................................................................................................................................,339.9.*.3.>., &nitial conditions.....................................................................................................................................,33
9.9.*.3.>.* Test procedure...................................................................................................................................... ..,3>9.9.*.3.>.3 Messae contents...................................................................................................................................,38
9.9.*.3.8 Test re?uirement........................................................................................................................................,389.9.*.3.8., Test re?uirements 2CT/...................................................................................................................,38
9.9.*.3.8.*Test re?uirements T/........................................................................................................................,38
9.9.*.> Boid ,399.9.3 "purious emissions..........................................................................................................................................,39
9.9.3., Transmitter "purious emissions...................................................................................................................,39
9.9.3.,., Test purpose..............................................................................................................................................,39
9.9.3.,.* Test applicability..................................................................................................................................... ..,399.9.3.,.3 Minimum conformance re?uirements..................................................................................................... ..,399.9.3.,.> Test description.........................................................................................................................................,3:
9.9.3.,.>., &nitial conditions.....................................................................................................................................,3:9.9.3.,.>.* Test procedure...................................................................................................................................... ..,3.3 Messae contents...................................................................................................................................,3 Test description.........................................................................................................................................,8+
9.9.3.3.>., &nitial conditions.....................................................................................................................................,8+
9.9.3.3.>.* Test procedure...................................................................................................................................... ..,8>9.9.3.3.>.3 Messae contents...................................................................................................................................,889.9.3.3.>.3., Messae contents (networ# sinalled value D'"E+8D).......................................................................,88
9.9.3.3.>.3.* Messae contents (networ# sinalled value '"E+:D).................................................................. .....,889.9.3.3.>.3.3 Messae contents (networ# sinalled value '"E+.3.> Messae contents (networ# sinalled value '"E+=D).................................................................. .....,889.9.3.3.8 Test re?uirement........................................................................................................................................,89
9.9.3.3.8., Test re?uirement (networ# sinalled value D'"E+8D)...........................................................................,899.9.3.3.8.* Test re?uirement (networ# sinalled value '"E+:D).................................................................... .......,89
9.9.3.3.8.3 Test re?uirement (networ# sinalled value '"E+ Test re?uirement (networ# sinalled value '"E+=D).................................................................... .......,8:
9.: Transmit intermodulation...................................................................................................................................,8:
9.:., Test purpose....................................................................................................................................................,8:9.:.* Test applicability........................................................................................................................................... ..,8:
9.:.3 Minimum conformance re?uirements........................................................................................................... ..,8:
9.:.> Test description...............................................................................................................................................,8
:.3.>.3.* Messae contents eceptions (networ# sinalled value D'"E+3D)...........................................................,98:.3.>.3.3 Messae contents eceptions (networ# sinalled value D'"E+9D)...........................................................,98
:.3.>.3.> Messae contents eceptions (networ# sinalled value D'"EJ+=KD)........................................................,98:.3.8 Test re?uirement..............................................................................................................................................,98:.> Maimum input level.........................................................................................................................................,9:
:.>., Test purpose....................................................................................................................................................,9:
:.>.* Test applicability........................................................................................................................................... ..,9.3 Minimum conformance re?uirements........................................................................................................... ..,9.> Test description...............................................................................................................................................,9.>., &nitial conditions...........................................................................................................................................,9.>.* Test procedure............................................................................................................................................ ..,9=:.>.>.3 Messae contents.........................................................................................................................................,9=
:.>.8 Test re?uirement..............................................................................................................................................,:+:.8 djacent 1hannel "electivity (1").................................................................................................................,:+
:.8., Test purpose....................................................................................................................................................,:+
:.8.* Test applicability........................................................................................................................................... ..,:+:.8.3 Minimum conformance re?uirements........................................................................................................... ..,:+:.8.> Test description...............................................................................................................................................,:,
:.8.>., &nitial conditions...........................................................................................................................................,:,:.8.>.* Test procedure............................................................................................................................................ ..,:*
:.8.>.3 Messae contents.........................................................................................................................................,:3:.8.8 Test re?uirement..............................................................................................................................................,:3
:.9 0loc#in characteristics.....................................................................................................................................,:>
:.9., &nCband bloc#in.............................................................................................................................................,:>:.9.,., Test Purpose................................................................................................................................................ .,:>
:.9.,.* Test pplicability.........................................................................................................................................,:>
:.9.,.3 Minimum 1onformance /e?uirements........................................................................................................,:8:.9.,.> Test ;escription...........................................................................................................................................,:8
:.9.,.>., &nitial 1onditions.......................................................................................................................................,:8:.9.,.>.* Test Procedure...........................................................................................................................................,:9
:.9.,.>.3 Messae 1ontents......................................................................................................................................,:::.9.,.8 Test /e?uirement.........................................................................................................................................,::
:.9.* OutCofCband bloc#in..................................................................................................................................... .,:.3 Messae 1ontents......................................................................................................................................, Test ;escription..............................................................................................................................................,=,
:.=.>., &nitial 1onditions..........................................................................................................................................,=,:.=.>.* Test Procedure..............................................................................................................................................,=*
:.=.>.3 Messae 1ontents.........................................................................................................................................,=*:.=.8 Test /e?uirement............................................................................................................................................,=*
< Performance /e?uirement..................................................................................................................,=3
8/13/2019 36521-1-930_s00-s08
10/280
*.......................................................................................................*+,*...............................................*,,.*., Test purpose...........................................................................................................................................*,,
.*.* Test applicability.................................................................................................................................. ..*,*.*.3 Minimum conformance re?uirements.................................................................................................. ..*,*
.*.> Test description......................................................................................................................................*,3.*.>., &nitial conditions..................................................................................................................................*,3
.*.>.* Test procedure................................................................................................................................... ..*,3.*.>.3 Messae contents................................................................................................................................*,3
.*.8 Test re?uirement.....................................................................................................................................*,8
8/13/2019 36521-1-930_s00-s08
11/280
Test description......................................................................................................................................*,:.*.,., Test purpose..............................................................................................................................................*>:
.*.,.* Test applicability..................................................................................................................................... ..*>:.*.,.3 Minimum conformance re?uirements..................................................................................................... ..*> Test description.........................................................................................................................................*>., &nitial conditions.....................................................................................................................................*>.* Test procedure...................................................................................................................................... ..*>=
.*.,.>.3 Messae contents...................................................................................................................................*>=
.*.,.8 Test re?uirement........................................................................................................................................*>=
3GPP
3GPP TS 3*+,-%!% .)+3+/ -/%/!%-"%-Release )
8/13/2019 36521-1-930_s00-s08
13/280
.*.* T;; P17&1IHP;11I Transmit ;iversity Performance............................................................... .......... ..*>=.*.*., T;; P17&1IHP;11I Transmit ;iversity **.......................................................................................*>=
.*.*.,., Test purpose...........................................................................................................................................*>=.*.*.,.* Test applicability.................................................................................................................................. ..*8+
.*.*.,.3 Minimum conformance re?uirements.................................................................................................. ..*8+.*.*.,.> Test description......................................................................................................................................*8+
.*.*.,.>., &nitial conditions..................................................................................................................................*8+.*.*.,.>.* Test procedure................................................................................................................................... ..*8,
.*.*.,.>.3 Messae contents................................................................................................................................*8,.*.*.,.8 Test re?uirement.....................................................................................................................................*8,
.*.*.* T;; P17&1IHP;11I Transmit ;iversity >*.......................................................................................*8*.*.*.*., Test purpose *8*
.*.*.*.* Test applicability.................................................................................................................................. ..*8*.*.*.*.3 Minimum conformance re?uirements.................................................................................................. ..*8*
.*.*.*.> Test description......................................................................................................................................*83
.*.*.*.>., &nitial conditions..................................................................................................................................*83.*.*.*.>.* Test procedure*83
.*.*.*.>.3 Messae contents................................................................................................................................*83
.*.*.*.8 Test re?uirement.....................................................................................................................................*83
8/13/2019 36521-1-930_s00-s08
14/280
., &nitial conditions..................................................................................................................................*98.* Test procedure................................................................................................................................... ..*99
.3 Messae contents................................................................................................................................*99*................................................................................................... ....*9:
8/13/2019 36521-1-930_s00-s08
15/280
&oe/od
This Technical "pecification has been produced by the 3 rdGeneration Partnership Project (3GPP).
The contents of the present document are subject to continuin wor# within the T"G and may chane followin formalT"G approval. "hould the T"G modify the contents of the present document- it will be reCreleased by the T"G with anidentifyin chane of release date and an increase in version number as follows
Bersion .y.!
where
the first diit
, presented to T"G for informationN
* presented to T"G for approvalN
3 or reater indicates T"G approved document under chane control.
y the second diit is incremented for all chanes of substance- i.e. technical enhancements- corrections-updates- etc.
! the third diit is incremented when editorial only chanes have been incorporated in the document.
$toductio$
The present document is part , of a multiCparts T"
3GPP TS 36.521-1: Evolved Universal Terrestrial Radio Access (E-UTRA) User E!"i#$ent (UE)
con%or$ance s#eci%ication Radio trans$ission and rece#tion Part 1: &on%or$ance Testin'.
3GPP T" 39.8*,C* J,,K 2volved niversal Terrestrial /adio ccess (2CT/)N ser 2?uipment (2)
conformance specification /adio transmission and receptionN Part * &mplementation 1onformance "tatement
(&1").
3GPP T" 39.8*,C3 J,*K 2volved niversal Terrestrial /adio ccess (2CT/)N ser 2?uipment
(2) conformance specification /adio transmission and receptionN Part 3 /adio /esourceManaement (//M) conformance testin.
3GPP
3GPP TS 3*+,-%!% .)+3+/ -/%/!%-"%,Release )
8/13/2019 36521-1-930_s00-s08
16/280
1 Scoe
The present document specifies the measurement procedures for the conformance test of the user e?uipment (2) thatcontain transmittin characteristics- receivin characteristics and performance re?uirements as part of the 3G 5on
Term 2volution (3G 5T2). 1onformance test for the support of //M (/adio /esource Manaement) are specified inT" 39.8*,C3 J,*K.
The re?uirements are listed in different clauses only if the correspondin parameters deviate. More enerally- tests areonly applicable to those mobiles that are intended to support the appropriate functionality. To indicate the circumstances
in which tests apply- this is noted in the definition and applicabilityF part of the test.
7or eample only /elease < and later 2 declared to support 5T2 shall be tested for this functionality. &n the event that
for some tests different conditions apply for different releases- this is indicated within the tet of the test itself.
3GPP
3GPP TS 3*+,-%!% .)+3+/ -/%/!%-"%*Release )
8/13/2019 36521-1-930_s00-s08
17/280
2 Reee$ces
The followin documents contain provisions which- throuh reference in this tet- constitute provisions of the presentdocument.
/eferences are either specific (identified by date of publication- edition number- version number- etc.) or
nonCspecific.
7or a specific reference- subse?uent revisions do not apply.
7or a nonCspecific reference- the latest version applies. &n the case of a reference to a 3GPP document (includin
a G"M document)- a nonCspecific reference implicitly refers to the latest version of that document in the sameRelease as the present document.
J,K 3GPP T/ *,.=+8 DBocabulary for 3GPP "pecificationsD.
J*K 3GPP T" 39.,+, D2CT/ 2 radio transmission and receptionD.
J3K &TC/ /ecommendation "M.3*=C,+- Dnwanted emissions in the spurious domainD
J>K 3GPP T" 39.,33 D2CT/ re?uirements for support of radio resource manaementD.
J8K 3GPP T" 39.33, D2CT/ /adio /esource 1ontrol (//1) protocol specificationD.
J9K 3GPP T" 39.3+> D2CT/ 2 procedures in idle modeD.
J:K 3GPP T" 39.8+
8/13/2019 36521-1-930_s00-s08
18/280
3 4ei$itio$s s7%ols "$d "%%e8i"tio$s
3.1 4ei$itio$s
7or the purposes of the present document- the terms and definitions iven in T/ *,.=+8 J,K and the followin apply.
term defined in the present document ta#es precedence over the definition of the same term- if any- in T/ *,.=+8 J,K.
&annel ed'e: The lowest and hihest fre?uency of the carrier- separated by the channel bandwidth.
&annel and*idt:The /7 bandwidth supportin a sinle 2CT/ /7 carrier with the transmission bandwidthconfiured in the uplin# or downlin# of a cell. The channel bandwidth is measured in MI! and is used as a reference
for transmitter and receiver /7 re?uirements.
+a,i$"$ "t#"t Po*er: The mean power level per carrier of 2 measured at the antenna connector in a specified
reference condition.
+ean #o*er: Lhen applied to 2CT/ transmission this is the power measured in the operatin system bandwidth of
the carrier. The period of measurement shall be at least one subframe (,ms) unless otherwise stated.
cc"#ied and*idt:The width of a fre?uency band such that- below the lower and above the upper fre?uency limits-
the mean powers emitted are each e?ual to a specified percentae H* of the total mean power of a iven emission.
"t#"t #o*er: The mean power of one carrier of the 2- delivered to a load with resistance e?ual to the nominal load
impedance of the transmitter.
P+ dela/: The rate in basic time unit at which PM& is updated.
Re%erence and*idt The bandwidth in which an emission level is specified.
Trans$ission and*idt:0andwidth of an instantaneous transmission from a 2 or 0"- measured in /esource 0loc#units.
Trans$ission and*idt con%i'"ration:The hihest transmission bandwidth allowed for uplin# or downlin# in a
iven channel bandwidth- measured in /esource 0loc# units.
Trans$it 0iversit/:Transmit diversity is based on spaceCfre?uency bloc# codin techni?ues complemented with
fre?uencyCshift time diversity when four transmit antennas is used.
3.2 S7%ols
7or the purposes of the present document- the followin symbols apply
0L1hannel 1hannel bandwidth
RSE Transmitted enery per /2 for reference symbols durin the useful part of the symbol- i.e.ecludin the cyclic prefi- (averae power normali!ed to the subcarrier spacin) at the e'ode 0
transmit antenna connector
sEP The received enery per /2 of the wanted sinal durin the useful part of the symbol- i.e.
ecludin the cyclic prefi- averaed across the allocated /0(s) (averae power within the
allocated /0(s)- divided by the number of /2 within this allocation- and normali!ed to thesubcarrier spacin) at the 2 antenna connector
7 7re?uency
7&nterferer(offset) 7re?uency offset of the interferer7&nterferer 7re?uency of the interferer
71 7re?uency of the carrier centre fre?uency7;5Elow The lowest fre?uency of the downlin# operatin band
7;5Ehih The hihest fre?uency of the downlin# operatin band75Elow The lowest fre?uency of the uplin# operatin band
75Ehih The hihest fre?uency of the uplin# operatin band
3GPP
3GPP TS 3*+,-%!% .)+3+/ -/%/!%-"%2Release )
8/13/2019 36521-1-930_s00-s08
19/280
2ditorQs note one of the two followin definitions for &o will be used (T0; in /'>)
oI The power spectral density of the total input sinal (power averaed over the useful part of the
symbols within the transmission bandwidth confiuration- divided by the total number of /2 for
this confiuration and normalised to the subcarrier spacin) at the 2 antenna connector-includin the ownCcell downlin# sinal
oI The power spectral density of the total input sinal at the 2 antenna connector (power averaed
over the useful part of the symbols within a iven bandwidth and normalised to the saidbandwidth)- includin the ownCcell downlin# sinal
orI The total transmitted power spectral density of the ownCcell downlin# sinal (power averaed over
the useful part of the symbols within the transmission bandwidth confiuration- divided by thetotal number of /2 for this confiuration and normalised to the subcarrier spacin) at the e'ode 0
transmit antenna connector
orIP The total received power spectral density of the ownCcell downlin# sinal (power averaed over
the useful part of the symbols within the transmission bandwidth confiuration- divided by the
total number of /2 for this confiuration and normalised to the subcarrier spacin) at the 2antenna connector
otI The received power spectral density of the total noise and interference for a certain /2 (averae
power obtained within the /2 and normali!ed to the subcarrier spacin) as measured at the 2
antenna connector
CRBsL The number of resource bloc#s allocated in the uplin# transmission bandwidth.
'cp 1yclic prefi lenth';5 ;ownlin# 2/71'
ocN The power spectral density of a white noise source (averae power per /2 normalised to the
subcarrier spacin)- simulatin interference from cells that are not defined in a test procedure- as
measured at the 2 antenna connector'OffsC;5 Offset used for calculatin downlin# 2/71'
'OffsC5 Offset used for calculatin uplin# 2/71'
otxN The power spectral density of a white noise source (averae power per /2 normalised to the
subcarrier spacin) simulatin e'ode 0 transmitter impairments as at the e'ode 0 transmitantenna connector
'/0 Transmission bandwidth confiuration- epressed in units of resource bloc#s'5 plin# 2/71'
P 'umber of cellCspecific antenna portsp ntenna port number
P1M@ The measured confiured maimum 2 output power..P2M@ Maimum allowed 2 output power sinalled by hiher layers. "ame as &2P-Maxdefined in J8K.
PPower1lass PPower1lassis the nominal 2 power (i.e.- no tolerance).PM@ Maimum 2 Power with possible power reduction due to modulation type- networ# sinallin
values and location near the ede of the bandN it e?uals P1M@when the &2P-Maxdefined in J8K- isnot sinalled.
/av Minimum averae throuhput per /0
P&nterferer Modulated mean power of the interferer
R7OO0 R 7re?uency of Out Of 0and emission/0 S Position of the /0 in the channel bandwidth.
3.3 #%%e8i"tio$s
7or the purposes of the present document- the abbreviations iven in T/ *,.=+8 J,K and the followin apply. nabbreviation defined in the present document ta#es precedence over the definition of the same abbreviation- if any- in
T/ *,.=+8 J,K.
15/ djacent 1hannel 5ea#ae /atio1" djacent 1hannel "electivity
CMP/ dditional Maimum Power /eductionLG' dditive Lhite Gaussian 'oise
0" 0ase "tation1P 1yclic Prefi
3GPP
3GPP TS 3*+,-%!% .)+3+/ -/%/!%-"%)Release )
8/13/2019 36521-1-930_s00-s08
20/280
1L 1ontinuous Lave;1& ;ownlin# 1ontrol &nformation
;5 ;ownlin# 2/71' 2CT/ bsolute /adio 7re?uency 1hannel 'umber
2P/2 2nery Per /esource 2lement2CT/ 2volved MT" Terrestrial /adio ccess
2T/' 2volved MT" Terrestrial /adio ccess 'etwor#2BM 2rror Bector Manitude
7;; 7re?uency ;ivision ;uple7/1 7ied /eference 1hannel
7"T; 7re?uencyC"hift Time ;iversityI/ Iybrid /
I;C7;; IalfC ;uple 7;;M1" Modulation and 1odin "cheme
MOP Maimum Output Power
MP/ Maimum Power /eductionM"/ Maimum "ensitivity /eduction
O1'G O7;M 1hannel 'oise Generator
O7;M Orthoonal 7re?uency ;ivision Multiple ccess
OO0 OutCofCbandP Power mplifier P17&1I Physical 1ontrol 7ormat &ndicator 1hannel
P;11I Physical ;ownlin# 1ontrol 1hannelP;"1I Physical ;ownlin# "hared 1hannel
P/0 Physical /esource 0loc#PM& Precodin Matri &ndicator
P"" Primary "ynchroni!ation "inalP""E/ P""CtoC2P/2 ratio for the channel P""
P11I Physical plin# 1ontrol 1hannel/2 /esource 2lement
/27"2'" /eference "ensitivity power levelr.m.s /oot Mean "?uare
/" /eference "inal"701 "paceC7re?uency 0loc# 1odin
"'/ "inalCtoC'oise /atio
""" "econdary "ynchroni!ation "inal"""E/ """CtoC/" 2P/2 ratio for the channel """
T;; Time ;ivision ;uple
TP1 Transmit Power 1ontrolTPM& Transmitted Precodin Matri &ndicator
2 ser 2?uipment5 plin#
MT" niversal Mobile Telecommunications "ystemT/ MT" Terrestrial /adio ccess
T/' MT" Terrestrial /adio ccess 'etwor#
1IE/ 1ICtoC/" 2P/2 ratio for the channel 1I in all transmitted O7;M symbols not containin /"1IE/0 1ICtoC/" 2P/2 ratio for the channel 1I in all transmitted O7;M symbols containin /"
3GPP
3GPP TS 3*+,-%!% .)+3+/ -/%/!%-"-/Release )
8/13/2019 36521-1-930_s00-s08
21/280
+ Ge$e"l
nless otherwise stated- the followin reference conditions used by all test cases in this document are specified in T"39.8+< J:K
1onnection ;iarams-
Test 7re?uencies-
1ell "ettins-
/eference 2nvironments-
2nvironmental 1onditions-
Generic 1onnection "etup Procedures-
"ystem &nformation ("&)-
Messae 1ontents.
Lhere a test re?uires one of the above reference conditions that are different- this will be specified within the test itself.
The Minimum /e?uirements defined in each test ma#e no allowance for Measurement ncertainty. Therefore- Test
Tolerances are used to rela the Minimum /e?uirements. &f the Test /e?uirement differs from the Minimum/e?uirement then the Test Tolerance applied for that test is nonC!ero. 7or each test the Test Tolerances are individually
calculated to create the Test /e?uirements. The Test Tolerance for each test and the eplanation of how the Minimum/e?uirement has been relaed by the Test Tolerance is iven in nne 7.3.
;ownlin# and plin# transmissions are orani!ed into radio frames with ms,+3+:*++ sf == !! duration.
Two radio frame structures are supported in this document
Type ,- applicable to 7;;-
Type *- applicable to T;;.
&n clauses 9 and : T@ and /@ test cases for 7;;HT;; test cases are defined. 7;; and T;; test scenariosHre?uirements are included within the same test case. 7or test cases with any difference between the 7;; and T;;
branches the test description part of the test case has been separated in two sections to cover the two technoloies. Theapplicability for the 7;; and T;; branches are specified in T" 39C8*,C*.
&n clause < the performance re?uirement test cases are defined. 7;; and T;; performance re?uirement test cases are
defined in different clauses accordinly to the re?uirements specified in T" 39.,+,.
nless otherwise stated- each test case is tested for every operatin band supported by the 2 and repeated with theapplicable test confiurations (i.e. test environment- test fre?uencies- test channel bandwidths- channel bandwidth
parameters) indicated in each test case. 7or test cases in clauses 9- :- < the initial conditions of the downlin# physicalchannels sinal levels and downlin# physical channels re?uired are specified in nne 1.+- nne 1., and nne 1.*.
7or test cases in clauses 9 and : that re?uire measurements with maimum output power- the 2 shall transmit at itsmaimum output power state with output power level of PM@level. This rane of maimum output power shall not be
modified for any further additional relaation.
7or test cases in clauses 9 and :- the partial /0 allocations refer to any /0 allocation less than full /0 allocation ecept
, /0 allocation.
3GPP
3GPP TS 3*+,-%!% .)+3+/ -/%/!%-"-%Release )
8/13/2019 36521-1-930_s00-s08
22/280
5 &eue$c %"$ds "$d c!"$$el ""$e7e$t
5.1 Ge$e"l
The channel arranements presented in this clause are based on the fre?uency bands and channel bandwidths defined in
the present release of specifications.
'OT2 Other operatin bands and channel bandwidths may be considered in future releases.
5.2 :e"ti$ %"$ds
2CT/ is desined to operate in the operatin bands defined in Table 8.*C,.
Tale ,+-!% E!UTRA operatin( ands
E!UTRA4peratin(5and
Uplink U6"eNode 5 receiveUE trans$it
7ownlink 76"eNode 5 trans$itUE receive
7uple89ode
:U6low < :U6hi(h :76low < :76hi(h1 1920 M;< = 19>0 M;< 2110 M;< = 210 M;< &44
2 1>50 M;< = 1910 M;< 1930 M;< = 1990 M;< &44
3 110 M;< = 1>5 M;< 1>05 M;< = 1>>0 M;< &44
+ 110 M;< = 155 M;< 2110 M;< = 2155 M;< &44
5 >2+ M;< = >+9 M;< >69 M;< = >9+M;< &44
6 >30 M;< = >+0 M;< >5 M;< = >>5 M;< &44
2500 M;< = 250 M;< 2620 M;< = 2690 M;< &44
> >>0 M;< = 915 M;< 925 M;< = 960 M;< &44
9 1+9.9 M;< = 1>+.9 M;< 1>++.9 M;< = 1>9.9 M;< &44
10 110 M;< = 10 M;< 2110 M;< = 210 M;< &44
11 1+2.9 M;< = 1++.9 M;< 1+5.9 M;< = 1+95.9 M;< &4412 69> M;< = 16 M;< 2> M;< = +6 M;< &44
13 M;< = > M;< +6 M;< = 56 M;< &44
1+ >> M;< = 9> M;< 5> M;< = 6> M;< &44
15 Rese8ed Rese8ed &44
16 Rese8ed Rese8ed &44
1 0+ M;< = 16 M;< 3+ M;< = +6 M;< &44
1> >15 M;< = >30 M;< >60 M;< = >5 M;< &44
19 >30 M;< = >+5 M;< >5 M;< = >90 M;< &4420 >32 M;< = >62 M;< 91 M;< = >21 M;< &44
21 1++.9 M;< = 1+62.9 M;< 1+95.9 M;< = 1510.9 M;< &44
?
33 1900 M;< = 1920 M;< 1900 M;< = 1920 M;< T443+ 2010 M;< = 2025 M;< 2010 M;< = 2025 M;< T44
35 1>50 M;< = 1910 M;< 1>50 M;< = 1910 M;< T4436 1930 M;< = 1990 M;< 1930 M;< = 1990 M;< T44
3 1910 M;< = 1930 M;< 1910 M;< = 1930 M;< T443> 250 M;< = 2620 M;< 250 M;< = 2620 M;< T44
39 1>>0 M;< = 1920 M;< 1>>0 M;< = 1920 M;< T44
+0 2300 M;< = 2+00 M;< 2300 M;< = 2+00 M;< T44
+1 2+96 M;< - 2690 M;< 2+96 M;< - 2690 M;< T44'ote @"$d 6 is $ot "lic"%le.
5.3 TA=RA eue$c se""tio$
a) The default 2T/ T@ channel (carrier centre fre?uency) to /@ channel (carrier centre fre?uency) separation isspecified in Table 8.3C, for the T@ and /@ channel bandwidths defined in Table 8.>.*.,C,
3GPP
3GPP TS 3*+,-%!% .)+3+/ -/%/!%-"--Release )
8/13/2019 36521-1-930_s00-s08
23/280
Tale ,+3!%& 7efault UE T=!R= fre#uenc> separation
E!UTRA 4peratin( 5and T= ! R=carrier centre fre#uenc>
separation
1 190 M;0 M; M;.*C, shows the relation between the 1hannel bandwidth (0L1hannel) and the Transmission bandwidth
confiuration ('/0). The channel edes are defined as the lowest and hihest fre?uencies of the carrier separated by thechannel bandwidth- i.e. at 71VHC 0L1hannelH*.
3GPP
3GPP TS 3*+,-%!% .)+3+/ -/%/!%-"-3Release )
8/13/2019 36521-1-930_s00-s08
24/280
Trans$ission5andwidth ?R5B
Trans$ission 5andwidth 'onfi(uration ?R5B
'hannel 5andwidth ?9@B
Resource lock'hannel ed(e 'hannel ed(e
'enter sucarrier corresponds to7' in aseand" is not trans$ittedCn downlinkActive Resource 5locks
:i(ure ,+0+-!% 7efinition of 'hannel 5andwidth and Trans$ission 5andwidth 'onfi(uration for oneE!UTRA carrier+
5.+.2.1 !"$$el %"$d/idt!s e oe"ti$ %"$d
a) The re?uirements in this specification apply to the combination of channel bandwidths and operatin bands shownin Table 8.>.*.,C,. The transmission bandwidth confiuration in Table 8.>.*C, shall be supported for each of the
specified supported channel bandwidths. The same (symmetrical) channel bandwidth is specified for both the T@ and/@ path.
3GPP
3GPP TS 3*+,-%!% .)+3+/ -/%/!%-"-0Release )
8/13/2019 36521-1-930_s00-s08
25/280
Tale ,+0+-+%!%& E!UTRA channel andwidth
E!UTRA and D channel andwidth
E!UTRA5and
%+0 9@ 3 9@ , 9@ %/ 9@ %, 9@ -/ 9@
1 Bes Bes Bes Bes
2 Bes Bes Bes Bes BesC1D BesC1D
3 Bes Bes Bes Bes BesC1D BesC1D
+ Bes Bes Bes Bes Bes Bes
5 Bes Bes Bes BesC1D
6 Bes BesC1D
Bes Bes Bes BesC1D
> Bes Bes Bes BesC1D
9 Bes Bes BesC1D BesC1D
10 Bes Bes Bes Bes
11 Bes BesC1D
12 Bes Bes BesC1D BesC1D
13 BesC1D BesC1D
1+ BesC1D BesC1D
...
1 BesC1D BesC1D
1> Bes BesC1D BesC1D
19 Bes BesC1D BesC1D
20 Bes BesC1D BesC1D BesC1D
21 Bes BesC1D BesC1D
?
33 Bes Bes Bes Bes
3+ Bes Bes Bes
35 Bes Bes Bes Bes Bes Bes36 Bes Bes Bes Bes Bes Bes
3 Bes Bes Bes Bes
3> Bes Bes Bes Bes
39 Bes Bes Bes Bes
+0 Bes Bes Bes Bes
+1 Bes Bes Bes Bes':TE 1 %"$d/idt! o /!ic! " el","tio$ o t!e seciied UE ecei8e se$siti8it
euie7e$t (l"use .3) is "llo/ed.
b) The use of different (asymmetrical)) channel bandwidth for the T@ and /@ is not precluded and is intended to formpart of a later release.
5.+.3 !"$$el "ste
The channel raster is ,++ #I! for all bands- which means that the carrier centre fre?uency must be an inteer multipleof ,++ #I!.
5.+.+ "ie eue$c "$d E#R&'
The carrier fre?uency in the uplin# and downlin# is desinated by the 2CT/ bsolute /adio 7re?uency 1hannel'umber (2/71') in the rane + C 98838. The relation between 2/71' and the carrier fre?uency in MI! for the
downlin# is iven by the followin e?uation- where 7;5Elowand 'OffsC;5are iven in table 8.>.>C, and ';5is the downlin#2/71'.
7;5U 7;5ElowV +.,(';5A 'OffsC;5)
The relation between 2/71' and the carrier fre?uency in MI! for the uplin# is iven by the followin e?uation
where 75Elowand 'OffsC5are iven in table 8.>.>C, and '5is the uplin# 2/71'.
75U 75ElowV +.,('5A 'OffsC5)
3GPP
3GPP TS 3*+,-%!% .)+3+/ -/%/!%-"-,Release )
8/13/2019 36521-1-930_s00-s08
26/280
Tale ,+0+0!% E!UTRA channel nu$ers
5and
7ownlink Uplink
:76low 9@" N4ffs!76 Ran(e of N76 :U6low 9@" N4ffs!U6 Ran(e of NU61 2110 0 0 = 599 1920 1>000 1>000 = 1>5992 1930 600 600 1199 1>50 1>600 1>600 = 19199
3 1>05 1200 1200 = 19+9 110 19200 19200 = 199+9+ 2110 1950 1950 = 2399 110 19950 19950 = 20399
5 >69 2+00 2+00 = 26+9 >2+ 20+00 20+00 = 206+9
6 >5 2650 2650 = 2+9 >30 20650 20650 = 20+9
2620 250 250 = 3++9 2500 2050 2050 = 20++9> 925 3+50 3+50 = 399 >>0 21+50 21+50 = 2199
9 1>++.9 3>00 3>00 = +1+9 1+9.9 21>00 21>00 = 221+9
10 2110 +150 +150 = ++9 110 22150 22150 = 22+9
11 1+5.9 +50 +50 = +9+9 1+2.9 2250 2250 = 229+912 2> 5000 5000 = 519 69> 23000 23000 = 2319
13 +6 51>0 51>0 = 529 231>0 231>0 = 2329
1+ 5> 52>0 52>0 = 539 >> 232>0 232>0 = 2339
?
1 3+ 530 530 = 5>+9 0+ 2330 2330 = 23>+9
1> >60 5>50 5>50 = 5999 >15 23>50 23>50 = 2399919 >5 6000 6000 = 61+9 >30 2+000 2+000 = 2+1+9
20 91 6150 6150 = 6++9 >32 2+150 2+150 = 2+++9
21 1+95.9 6+50 6+50 = 6599 1++.9 2++50 2++50 = 2+599
?
33 1900 36000 36000 =36199 1900 36000 36000 = 36199
3+ 2010 36200 36200 =363+9 2010 36200 36200 = 363+9
35 1>50 36350 36350 =369+9 1>50 36350 36350 = 369+9
36 1930 36950 36950 =35+9 1930 36950 36950 = 35+9
3 1910 3550 3550 =3+9 1910 3550 3550 = 3+9
3> 250 350 350 =3>2+9 250 350 350 = 3>2+9
39 1>>0 3>250 3>250 =3>6+9 1>>0 3>250 3>250 = 3>6+9
+0 2300 3>650 3>650 =396+9 2300 3>650 3>650 = 396+9
+1 2+96 39650 39650 - +15>9 2+96 39650 39650 - +15>9
':TE T!e c!"$$el $u7%es t!"t desi$"te c"ie eue$cies so close to t!e oe"ti$ %"$d edes t!"t t!ec"ie e,te$ds %eo$d t!e oe"ti$ %"$d ede s!"ll $ot %e used. T!is i7lies t!"t t!e ist 15 2550 5 "$d 100 c!"$$el $u7%es "t t!e lo/e oe"ti$ %"$d ede "$d t!e l"st 6 1+ 2+ +9 + "$d 99c!"$$el $u7%es "t t!e ue oe"ti$ %"$d ede s!"ll $ot %e used o c!"$$el %"$d/idt!s o 1.+ 35 10 15 "$d 20 M;< esecti8el.
3GPP
3GPP TS 3*+,-%!% .)+3+/ -/%/!%-"-*Release )
8/13/2019 36521-1-930_s00-s08
27/280
6 T"$s7itte !""cteistics
6.1 Ge$e"l
nless otherwise stated- the transmitter characteristics are specified at the antenna connector of the 2 with a sinle
transmit antenna. 7or 2 with interal antenna only- a reference antenna with a ain of + d0i is assumed.
The transient periods due to power steps- O77HO' and O'HO77 transitions could occur at slot or symbol boundary with
transients- on one or both sides of the boundary. The measurement period and whether to eclude the transient periodsare specified in the respective sections below.
nless otherwise stated- the Test 2?uipment shall be synchronised to the plin# sinal for measurement of T;;
transmitter characteristics.
6.2 T"$s7it o/e
6.2.1 Void
2ditorQs note this voidF section was introduced because T" 39.,+, v
8/13/2019 36521-1-930_s00-s08
28/280
Tale *+-+-+3!%& UE Power 'lass
EUTRAand
'lass %d5$"
Toleranced5"
'lass -d5$"
Toleranced5"
'lass 3d5$"
Toleranced5"
'lass 0d5$"
Toleranced5"
1 23 2
2 23 22
3 23 22
+ 23 25 23 2
6 23 2
23 22
> 23 22
9 23 2
10 23 2
11 23 2
12 23 22
13 23 21+ 23 2
?
1 23 2
1> 23 219 23 2
20 23 *2
21 23 2
?
33 23 2
3+ 23 2
35 23 2
36 23 2
3 23 2
3> 23 2
39 23 2+0 23 2
+1 23 2
?'ote 1 T!e "%o8e tole"$ces "e "lic"%le o UE(s) t!"t suot u to + E-UTR# oe"ti$ %"$ds. &o UE(s) t!"t
suot 5 o 7oe E-UTR# %"$ds t!e 7",i7u7 outut o/e is e,ected to dece"se /it! e"c!"dditio$"l %"$d "$d is &&S
'ote 2 &o t"$s7issio$ %"$d/idt!s (&iue 5.+.2-1) co$i$ed /it!i$ &ULFlo/"$d &ULFlo/* + M;< o &ULF!i!= + M;CD su%cl"use +.1
'o7"l TLVL TLV; T;VL T;V;
Test &eue$cies "s seciied i$TS36.50> CD su%cl"use +.3.1
Lo/ "$e Mid "$e ;i! "$e
Test !"$$el @"$d/idt!s "s seciied i$TS 36.50> CD su%cl"use +.3.1
Lo/est 5M;
8/13/2019 36521-1-930_s00-s08
30/280
*. "end continuously uplin# power control upF commands in every uplin# schedulin information to the 2Nallow at least *++ms for the 2 to reach PM@ level.
3. Measure the mean power of the 2 in the channel bandwidth of the radio access mode. The period ofmeasurement shall be the continuous duration of one subCframe (,ms). 7or T;; slots with transient periods are not
under test.
6.2.2.+.3 Mess"e co$te$ts
Messae contents are accordin to T" 39.8+< J:K subclause >.9.
6.2.2.5 Test euie7e$ts
The maimum output power- derived in step 3 shall be within the rane prescribed by the nominal maimum output
power and tolerance in Table 9.*.*.8C,.
Tale *+-+-+,!%& UE Power 'lass test re#uire$ents
EUTRA
and
'lass %
d5$"
Tolerance
d5"
'lass -
d5$"
Tolerance
d5"
'lass 3
d5$"
Tolerance
d5"
'lass 0
d5$"
Tolerance
d5"1 23 2.
2 23 2.2
3 23 2.2
+ 23 2.
5 23 2.
6 23 2.
23 2.2
> 23 2.2
9 23 2.
10 23 2.
11 23 2.
12 23 2.2
13 23 2.
1+ 23 2.?
1 23 2.
1> 23 2.
19 23 2.
20 23 2.2
21 23 2.
?
33 23 2.
3+ 23 2.
35 23 2.
36 23 2.
3 23 2.3> 23 2.
39 23 2.
+0 23 2.
+1 23 2.?
'ote 1 T!e "%o8e tole"$ces "e "lic"%le o UE(s) t!"t suot u to + E-UTR# oe"ti$ %"$ds. &o UE(s)t!"t suot 5 o 7oe E-UTR# %"$ds t!e 7",i7u7 outut o/e is e,ected to dece"se /it! e"c!"dditio$"l %"$d "$d is &&S
'ote 2 &o t"$s7issio$ %"$d/idt!s (&iue 5.+.2-1 T"%le 5.+.+-1) co$i$ed /it!i$ &ULFlo/"$d &ULFlo/* + M;< o&ULF!i!= + M;< "$d &ULF!i! t!e 7",i7u7 outut o/e euie7e$t is el",ed % educi$ t!e lo/etole"$ce li7it % 1.5 d@ (Tole"$ce *2. -+.2)
'ote 3 &o t!e UE /!ic! suots %ot! @"$d 11 "$d @"$d 21 oe"ti$ eue$cies t!e tole"$ce is &&S.
3GPP
3GPP TS 3*+,-%!% .)+3+/ -/%/!%-"3/Release )
8/13/2019 36521-1-930_s00-s08
31/280
6.2.3 M",i7u7 Po/e Reductio$ (MPR)
6.2.3.1 Test uose
The number of /0 identified in Table 9.*.*.3C, is based on meetin the re?uirements for adjacent channel lea#ae ratioand the maimum power reduction (MP/) due to 1ubic Metric (1M).
"imple scalin can be used to derive the re?uirement for other bandwidth based on the previously areed value for8MI! channel bandwidth.
6.2.3.2 Test "lic"%ilit
The re?uirements of this test apply in test cases 9.9.*.3 djacent 1hannel 5ea#ae power /atio to all types of 2CT/2 release < and forward.
6.2.3.3 Mi$i7u7 co$o7"$ce euie7e$ts
7or 2 Power 1lass 3- the allowed Maimum Power /eduction (MP/) for the maimum output power in Table
9.*.*.3C, due to hiher order modulation and transmit bandwidth confiuration (resource bloc#s) is specified in Table9.*.3.3C,.
Tale *+-+3+3!%& 9a8i$u$ Power Reduction 9PR" for Power 'lass 3
9odulation 'hannel andwidth D Trans$ission andwidth confi(uration?R5B
9PR d5"
%+09@
3+/9@
,9@
%/9@
%,9@
-/9@
JPSK N 5 N + N > N 12 N 16 N 1> O 1
16 J#M O 5 O + O > O 12 O 16 O 1> O 1
16 J#M N 5 N + N > N 12 N 16 N 1> O 2
7or the 2 maimum output power modified by MP/- the power limits specified in subclause 9.*.8.3 apply.
The normative reference for this re?uirement is T" 39.,+, clause 9.*.3.
6.2.3.+ Test descitio$
6.2.3.+.1 $iti"l co$ditio$
&nitial conditions are a set of test confiurations the 2 needs to be tested in and the steps for the "" to ta#e with the 2to reach the correct measurement state.
The initial test confiurations consist of environmental conditions- test fre?uencies- and channel bandwidths based on
2CT/ operatin bands specified in table 8.>.*.,C,. ll of these confiurations shall be tested with applicable testparameters for each channel bandwidth- and are shown in table 9.*.3.>.,C,. The details of the uplin# referencemeasurement channels (/M1s) are specified in nnees .*. 1onfiurations of P;"1I and P;11I before
measurement are specified in nne 1.*.
3GPP
3GPP TS 3*+,-%!% .)+3+/ -/%/!%-"3%Release )
8/13/2019 36521-1-930_s00-s08
32/280
Tale *+-+3+0+%!%& Test 'onfi(uration Tale
Cnitial 'onditions
Test E$8io$7e$t "s seciied i$TS 36.50>CD su%cl"use +.1
'o7"l TLVL TLV; T;VL T;V;
Test &eue$cies "s seciied i$TS36.50> CD su%cl"use +.3.1
Lo/ "$e Mid "$e ;i! "$e
Test !"$$el @"$d/idt!s "s seciied i$TS 36.50> CD su%cl"use +.3.1
Lo/est 5M; >
5M;< JPSK 25 25
5M;< 16J#M > >
5M;< 16J#M 25 25
10M;< JPSK 12 12
10M;< JPSK 50 50
10M;< 16J#M 12 12
10M;< 16J#M 50('ote 3)
50('ote 3)
15M;< JPSK 16 1615M;< JPSK 5 5
15M;< 16J#M 16 16
15M;< 16J#M 5
('ote 3)
5
('ote 3)20M;< JPSK 1> 1>
20M;< JPSK 100 100
20M;< 16J#M 1> 1>
20M;< 16J#M 100('ote 3)
100('ote 3)
'ote 1 Test !"$$el @"$d/idt!s "e c!eced se""tel o e"c! E-UTR# %"$d t!e "lic"%lec!"$$el %"$d/idt!s "e seciied i$ T"%le 5.+.2.1-1.
'ote 2 T!e st"ti$ esouce %loc o "ti"l R@ "lloc"tio$ s!"ll %e R@0 "$d R@(7", * 1-R@"lloc"tio$) o t!e c!"$$el %"$d/idt!.
'ote 3 #lies o$l o UE-"teoies 2-5
,. 1onnect the "" and interferin sources to the 2 antenna connectors as shown in T" 39.8+
8/13/2019 36521-1-930_s00-s08
33/280
b) *. "end continuously uplin# power control upF commands in the uplin# schedulin information to the 2 toensure that the 2 transmits at PM@ level.
c) 3. Measure the mean power of the 2 in the channel bandwidth of the radio access mode. The period ofmeasurement shall be at least the continuous duration one subCframe (,ms). 7or T;; slots with transient periods
are not under test.
6.2.3.+.3 Mess"e co$te$ts
Messae contents are accordin to T" 39.8+< J:K subclause >.9.
6.2.3.5 Test euie7e$ts
The maimum output power- derived in step * shall be within the rane prescribed by the nominal maimum output
power and tolerance in Table 9.*.3.8C,.
3GPP
3GPP TS 3*+,-%!% .)+3+/ -/%/!%-"33Release )
8/13/2019 36521-1-930_s00-s08
34/280
Tale *+-+3+,!%& UE Power 'lass test re#uire$ents
3GPP
3GPP TS 3*+,-%!% .)+3+/ -/%/!%-"30Release )
8/13/2019 36521-1-930_s00-s08
35/280
E!UTRA5and
'lass %d5$"
Tol+7"
'lass -d5$"
Tol+d5"
'lass 3d5$"
PSF fullR5
allocationTol+d5""
%*A9partial
R5allocation
Tol+d5"
%*A9full R5
allocationTol+d5"
1 23
*2.
-3.
*2.
-3.
*2.
-+.
2 23*2. 12
-3.*2. 12
-3.*2. 12
-+.
3 23*2. 12
-3.*2. 12
-3.*2. 12
-+.
+ 23*2. -3.
*2. -3.
*2. -+.
5 23*2. -3.
*2. -3.
*2. -+.
6 23*2. -3.
*2. -3.
*2. -+.
23*2. 12
-3.*2. 12
-3.*2. 12
-+.
> 23
*2. 12
-3.
*2. 12
-3.
*2. 12
-+.
9 23*2. -3.
*2. -3.
*2. -+.
10 23*2. -3.
*2. -3.
*2. -+.
11 23*2. -3.
*2. -3.
*2. -+.
12 23*2. 12
-3.*2. 12
-3.*2. 12
-+.
13 23*2. -3.
*2. -3.
*2. -+.
1+ 23*2. -3.
*2. -3.
*2. -+.
?
1 23 *2. -3.
*2. -3.
*2. -+.
1> 23*2. -3.
*2. -3.
*2. -+.
19 23*2. -3.
*2. -3.
*2. -+.
20 23*2. 12
-3.*2. 12
-3.*2. 12
-+.
21 23*2. -3.
*2. -3.
*2. -+.
...
33 23*2. -3.
*2. -3.
*2. -+.
3+ 23
*2.
-3.
*2.
-3.
*2.
-+.
35 23*2. -3.
*2. -3.
*2. -+.
36 23*2. -3.
*2. -3.
*2. -+.
3 23*2. -3.
*2. -3.
*2. -+.
3> 23*2. -3.
*2. -3.
*2. -+.
39 23 *2. -3.
*2.
C3.:*2.
C>.:+0 23 *2.
-3.*2.
C3.:*2.
C>.:+1 23 *2.
-3.*2. -3.
*2. -+.
3GPP
3GPP TS 3*+,-%!% .)+3+/ -/%/!%-"3,Release )
8/13/2019 36521-1-930_s00-s08
36/280
'ote 1 &o t"$s7issio$ co$iu"tio$s (&iue 5.+.2-1) co$i$ed /it!i$ &ULFlo/ "$d &ULFlo/ * + M;- '"E+9 and '"E+: to all types of 2CT/ 2 release < and forward.
The re?uirements of this test apply in test case 9.9.3.3 dditional "purious 2missions for networ# sinalled values
'"E+8- '"E+: and '"E+ 6.6.3.3.3.3 19 10 15
N 29 O 1
N 39 O 2
N ++ O 3
'SF09 6.6.3.3.3.+ 21 10 15N +0 O 1
N 55 O 2
'SF10 20 20T"%le
6.2.+.3-3T"%le
6.2.+.3-3
..
'SF32 - - - - -
3GPP
3GPP TS 3*+,-%!% .)+3+/ -/%/!%-"3*Release )
8/13/2019 36521-1-930_s00-s08
37/280
Tale *+-+0+3!-& A!9PR for NS/1H
Re(ion A Re(ion 5 Re(ion '
R@Fst"t1 0 = 12 13 =1> 19 = +2 +3 = +9
LFR@2CR@sD 6 = >1 to 5 "$d
9-50Q> > Q1> 1> O2 N2
#-MPR Cd@D O> O12 0 O12 0 O6 O3 0
'ote 1 R@Fst"t i$dic"tes t!e lo/est R@ i$de, o t"$s7itted esouce %locs'ote 2 LFR@ is t!e le$t! o " co$tiuous esouce %loc "lloc"tio$'ote 3 &o i$t"-su%"7e eue$c !oi$ %et/ee$ t/o eio$s $otes 1 "$d 2 "l o$ " e
slot %"sis.'ote + &o i$t"-su%"7e eue$c !oi$ %et/ee$ t/o eio$s t!e l"e #-MPR 8"lue o t!e
t/o eio$s 7" %e "lied o %ot! slots i$ t!e su%"7e.
Tale *+-+0+3!3& A!9PR for NS%/H
Re(ion A Re(ion 5
R@Fst"t1 C0 = 15D C6 = 90D
LFR@2CR@sD C1-25D C1-23D
#-MPR Cd@D OC5D OC5D'ote 1 R@Fst"t i$dic"tes t!e lo/est R@ i$de, o t"$s7itted esouce %locs'ote 2 LFR@ is t!e le$t! o " co$tiuous esouce %loc "lloc"tio$'ote 3 &o i$t"-su%"7e eue$c !oi$ %et/ee$ t/o eio$s $otes 1 "$d 2 "l o$ " e
slot %"sis.'ote + &o i$t"-su%"7e eue$c !oi$ %et/ee$ t/o eio$s t!e l"e #-MPR 8"lue o t!e
t/o eio$s 7" %e "lied o %ot! slots i$ t!e su%"7e.
Tale *+-+0+3!0 A!9PR for NS/0 for andwidths I ,9@
'hannel 5J Para$eters Re(ion A Re(ion 5 Re(ion '
10 R@Fst"t1 0 = 12 13 = 36 3 = +9
R@Fst"t1 * LFR@2
CR@sD
'#
('ote 3)
1+ - 3 N3 '#
('ote 3)#-MPR Cd@D O3d@ 0 O2d@ O3d@
15 R@Fst"t1 0 = 1> 19 = 55 56 = +
R@Fst"t1 * LFR@2
CR@sD'#
('ote 3)20 - 56 N56 '#
('ote 3)
#-MPR Cd@D O3d@ 0 O2d@ O3d@
20 R@Fst"t1 0 = 2+ 25 = + 5 = 99R@Fst"t1 * LFR@2
CR@sD'#
('ote 3)26 - 5 N5 '#
('ote 3)
#-MPR Cd@D O3d@ 0 O2d@ O3d@
'ote 1 R@Fst"t i$dic"tes t!e lo/est R@ i$de, o t"$s7itted esouce %locs'ote 2 LFR@ is t!e le$t! o " co$tiuous esouce %loc "lloc"tio$'ote 3 #$ R@ "lloc"tio$ t!"t st"ts i$ Reio$ # o is "llo/ed t!e seciied #-MPR'ote + &o i$t"-su%"7e eue$c !oi$ /!ic! i$tesects eio$s $otes 1 "$d 2 "l o$ " e slot %"sis
'ote 5 &o i$t"-su%"7e eue$c !oi$ /!ic! i$tesects eio$s t!e l"e #-MPR 8"lue 7" %e "lied o%ot! slots i$ t!e su%"7e
6.2.+.+ Test descitio$
6.2.+.+.1 $iti"l co$ditio$
&nitial conditions are a set of test confiurations the 2 needs to be tested in and the steps for the "" to ta#e with the 2to reach the correct measurement state.
The initial test confiurations consist of environmental conditions- test fre?uencies- and channel bandwidths based on2CT/ operatin bands specified in table 8.>.*.,C,. ll of these confiurations shall be tested with applicable test
parameters for each channel bandwidth- and are shown in tables 9.*.>.>.,C, throuh table 9.*.>.>.,C9. The details of theuplin# reference measurement channels (/M1s) are specified in nne .*. 1onfiurations of P;"1I and P;11I
before
