Vipul Sabharwal
Vice President - (Sales & Marketing)
-R22
a
Under Preparation before use
Before using the air conditioner, be sure to check and preset as the following.
Remote Controller (RC)
Auto-Restart Function
Auto Turbo Mode
Turbo mode is used to start or stop fast cooling.
6
powered on
6
In case of power resume, auto turbo mode work for 10 min.
Safety precautions
bend
may be
away
around
any
requirements
2
3
4
Timer Turbo Temperature On Sleep
4 55
Remote controller
Remote controller The remote controller transmits signals to the system.
1 ON/OFF BUTTON The appliance will be switched on or Off on pressing this button
2 MODE BUTTON Press this button to select the operation mode.
3 FAN BUTTON Used to select fan speed in sequence
6
auto, high, medium or low.
ROOM TEMPERATURE SETTING BUTTONS
Used to adjust the room temperature and the timer, also real time.
SENSE BUTTON Used to enter fuzzy logic operation directly, regardless of the unit is on or off.
1
3
2
7
4
5
8
13
9
7
8
SWING BUTTON Used to stop or start vertical adjustment louver swinging and set the desired up/down airflow direction.
SLEEP BUTTON
6 12
14 10 11
Used to set or cancel Sleep Mode operation.
9 AROUND U BUTTON Used to set or cancel AROUND U Mode operation.
10 POWER SAVER BUTTON Used to enter or quit POWER SAVER mode
11 TIMER OFF BUTTON Used to cancel the timer operation.
11 12 TIMER ON/CLOCK BUTTON Used to set timer operation and clock.
13 TURBO BUTTON Used to start or stop the fast cooling.
14 DIM BUTTON When you press this button, all the display of indoor unit will be switched off. Press any button to resume display.
5
Indication symbols on LCD: Cooling indicator Auto fan speed 6th sense indicator Signal transmit
Dry indicator
Fan only indicator
Heating indicator
High fan speed Medium fan speed
Low fan speed
Sleep indicator
Around U
Turbo indicator
ON
OFF
Display set timer
Display current time
Display set temperature
Power saver indicator
Note: Each mode and relevant function will be further specified in following pages.
Memory Super silense
Remote controller
How to Insert the Batteries
Note: Use 2 LR03 AAA(1.5volt) batteries. Do not use rechargeable batteries. Replace batteries with new ones of the same type when the display becomes dim.
How to Use
6
7
16~30
16 30
1 3
4
2
8
Default position is applicable after power resume
SWING 5
9
Room temperature decrease by 1.5℃ afteroperate for 3 minutes
Around U button
Note: Temperature, airflow and direction are controlled automatically in 6th sense mode.
However, For the on/off, you can choose from -2 to 2, for the inverter you can choose from -7 to 7. if you
still feel uncomfortable.
Operating Instructions
Note: If you don't set the time in 10 seconds after you press TIMER ON button, the remote controller will exit the TIMER ON mode automatically.
A "beep" can be heard. "ON" stops flashing. The TIMER indicator on the indoor unit lights up.
Note: the TIMER ON mode has been canceled.
10
Operating Instructions
SLEEP mode
SLEEP mode SLEEP mode can be set in COOLING HEATING or DRYING operation mode.
This function gives you a more comfortable environment for sleep. In SLEEP mode,
The appliance will stop operation automatically after operating for 8 hours. Fan speed is automatically set at low speed.
*Set temperature will rise by 1 if the appliance operates continuously in mode for hours constantly, then remains steady.
*Note: In cooling mode, if room temperature is 26 or above, set temperature will not change. Note: Heating is NOT available for cooling only air conditioner.
TURBO mode
TURBO mode
Turbo mode is used to reduce the temperature of your room at the highest possible rate, by operating at highest fan speed and changing the set temperature to 18 .
In TURBO mode, you can set airflow direction or timer. If you want to escape from TURBO mode, press TURBO , MODE, FAN, ON/OFF,SLEEP or TEMPERATURE SETTING button, the display will return to the original mode.
*Note: 6TH SENSE button is not available in TURBO mode. The Appliance will continue working in TURBO mode , if you don't exit from it by pressing any of the buttons mentioned above.
11
cooling 1
Power Saver
Whenever this feature is selected, the AC runs at a default temp
of 25 deg & low Fan Speed in cool mode.
•Can be set only when the unit is ON.
•To escape, press any button (Turbo, Fan, On/Off, Temp Setting)
Power Saver
12
Maintenance
Clean the air filter every two weeks if the air conditioner operates in an extremely dusty environment.
13
14
16
Troubleshooting The following cases may not always be a malfunction, please check it before asking for service.
s ?
from ing?
Are the ?
s ?
n
15
Troubleshooting chart
16
17
18
same as per provided connecting pipe
Installation instructions
1. Installing the Mounting Plate
Note: The shape of your mounting plate may be different from the one above, but installation method is similar.
2. Drill a Hole for Piping
3. Indoor Unit Piping Installation
Note: When installing the pipe at the directions 1,2 or 4, saw the corresponding unloading piece off the indoor unit base.
19
Below declared Connecting pipe length to be referred as standard length
for Model Sold without Connecting Pipe.
Model Pipe length
1.0T 4 Meter
1.5T 3.2Meter
2.0T 4 Meter
Installation instructions
Piping Joints Thermal Insulation:
Piping Thermal Insulation:
Note: Drain hose is prepared by user.
Piping Connection:
02
Installation instructions
Capacity (Btu/h)
Power Cord Power connecting cord Main power
supply(Note) Type Normal
cross-sectional area
Type Normal
cross-sectional area
4. Connecting of the Cable
Indoor Unit
Note: For some models, it is necessary to remove the cabinet to Indoor unit
connect to indoor unit terminal.
Outdoor Unit
Outdoor unit
The figures in this manual are based on the external view of a standard model. Consequently, the shape may differ from that of the air conditioner you have
selected.
Caution:
1. Never fail to have an individual power circuit specifically for the air conditioner. As for the method of
wiring, refer to the circuit diagram posted on the inside of the access door . 2.Comfirm that the cable thickness is as specified in the power source specification. 3.Check the wires and make sure that they are all tightly fastened after cable connection.
4. Be sure to install an earth leakage circuit breaker in wet or moist area.
Cable Specifications
4)
21
22
23
24
Warranty term
A RELATIONSHIP FOR LIFEWITH 5 YEARS WARRANTY
Whirlpool 3D Cool Air Conditioner
25
Warranty term
26
Warranty term
27
15. "Whirlpool Products without barcode label affixed on the product will not be covered under warranty."
28
29
Installation commissioning
30
31
Installation commissioning
32
33
Declaration on Hazardous Substances : EWaste Rules
Some components used in manufacturing this Air Conditioner contain low content of some
substances classified as hazardous, according to EWaste Rules published by the
Government of India. These do not pose any risk to the conditioning of air inside the room.
Nor does physical contact with the Air Conditioner during the life of the product
endanger health or safety to humans or any living creature. However, if the Air Conditioner
is not disposed safely at the end of its life, inappropriate handling of waste may pose risks
to health and environment. Hence, it is our advice that you contact Whirlpool when you
are ready to discard the product so that we can channelize the appliance and its
components for safe disposal.