Date post: | 14-Jun-2015 |
Category: |
Technology |
Upload: | farotechnologies |
View: | 352 times |
Download: | 4 times |
1 © 2014 FARO
3D Documentation – Technology
Oliver Bürkler, Senior Product Manager
2
3
5.3
4
5
6
7
8
9
Xtra range - 330 m
Xtra sun proof
Xtra positioning - GPS
Xtra peace of mind – Class 1
COLLABORATE PROCESS SCAN
10
5.3
Cloud-to-cloud registration
TopView-based registration
COLLABORATE PROCESS SCAN
11
“Registration was uneventful, requiring adjustment only at the stairwells where overlap was minimal, and room geometry a bit more complicated. Out of 130 scans, ~9 scan positions failed to register properly on the first pass. Considering that target spheres and paper targets were not used at all, the little extra time needed for registration adjustment was acceptable. Based upon my cumulative experience with targetless registration, I expect to employ c2c registration about 80% of the time.” Scott Page M.Arch, Scott Page Design
COLLABORATE PROCESS SCAN
12
COLLABORATE PROCESS SCAN
13
COLLABORATE PROCESS SCAN
14
COLLABORATE PROCESS SCAN
15
COLLABORATE PROCESS SCAN
16
17
What´s Next?
18
Living in the Point Cloud
19
The common 3D Documentation Workflow
Living in the Point Cloud
Laser Scan Data
Processing
3D CAD Modelling
As-Built CAD
Archive
20
New Workflow: Using the Point Cloud as it is
Living in the Point Cloud
Laser Scan Data
Processing
Use the Point Cloud
CAD of modifications
Archive
21
Living in the Point Cloud
“Scan what is there. Model what is new.” Magnus Rönnäng Technical Expert, Virtual Manufacturing, Volvo Cars Group
22
Application Specific
Solutions
23
Application Specific Solutions
24
Global Product Marketing Team
25