3
3D LED Flex 40 Modular, flexible LED linear lighting system IP 20, IP 44 and IP 65
3D LED Flex 40Modular, flexible LED linear lighting system IP 20, IP 44 and IP 65
2 3
Interior version IP 20 no lenses Clear moulded cover
Nichia NS6 LEDs - 2 LEDs per module
RAD 3D LED Flex 40 IP 20 NS6 - 2
Supplied in 1.0 mtr lengths as standard Lengths based on 100 mm (3.93") module to orderIntegral LV constant current driver 350 mA or 700 mA 2.5 or 5 Watts per 100 mm (3.93")30 Volt DC Supply
Dimming 1 - 10V and DALI
Exterior version IP 65 with lenses
Nichia NCSL LEDs - 4 per moduleLow iron UV block glass covers Elliptical, wide, medium, & narrow lenses
RAD LED Flex 40 IP 65 NCSL - 4 L
Supplied in 1.0 mtr (3.28') lengths as standard Lengths based on 100 mm (3.93") module to order
Integral LV constant current driver 350 mA 5 Watts per 100 mm. (3.93") 30 Volt DC Supply Dimming 1 - 10V and DALI
Interior version IP 20 no lenses Die cast aluminum cover for use with optical film or colour filters
Nichia NS6 LEDs - 4 LEDs per module
RAD 3D LED Flex 40 IP 20 NS6 - 4
Supplied in 1.0 mtr (3.28') lengths as standard Lengths based on 100 mm (3.93") module to orderIntegral LV constant current driver 350 mA 5 Watts per 100 mm. (3.93") 30 Volt DC SupplyDimming 1 - 10V and DALI
Interior IP 20 version with lensesElliptical, wide, medium, & narrow lenses
Nichia NCSL LEDs - 4 LEDs per module
RAD 3DLED Flex 40 NCSL - 4 L
Supplied in 1.0 mtr (3.28') lengths as standard Lengths based on 100 mm (3.93") module to order
Integral LV constant current driver 350 mA 5 Watts per 100 mm. (3.93") 30 Volt DC SupplyDimming 1 - 10V and DALI
Exterior version IP 65 without lenses
Nichia NS6 LEDs
Low iron UV block glass covers
RAD LED Flex 40 IP 65 NCSL - 4
Supplied in 1.0 mtr (3.28') lengths as standard Lengths based on 100 mm (3.93") module to order
Integral LV constant current driver 350 mA 5 Watts per 100 mm. (3.93") 30 Volt DC Supply Dimming 1 - 10V and DALI
Interior extruded version IP 20 no lenseslinks to flexible modulesNichia NS6 LEDs
RAD 3D LED Flex 40 IP 20 Extruded NS6 - 4
Standard lengths1.0 mtr (3.28') 55 Watts1.5 mtr (4.92') 83 Watts
Integral LV constant current driver 350 mA 5 Watts per 100 mm. (3.93") 30 Volt DC SupplyDimming 1 - 10V and DALI
Interior IP 20 version with lenses shown on adjustable mounting bracket
Elliptical, wide, medium, and narrow lens Nichia NCSL LEDs - 4 LEDs per module
RAD 3D LED Flex 40 NCSL - 4 L
Supplied in 1.0 mtr (3.28') lengths as standard Lengths based on 100 mm (3.93") module to orderIntegral LV constant current driver 350mA 5 Watts per 100 mm. (3.93") 30 Volt DC SupplyDimming 1 - 10V and DALI
Interior version IP 20 no lenses Clear moulded cover
Nichia NS6 LEDs - 4 LEDs per module
RAD 3D LED Flex 40 IP 20 NS6 - 4
Supplied in 1.0 mtr (3.28') lengths as standard Lengths based on 100 mm (3.93") module to orderIntegral LV constant current driver 350 mA 5 Watts per 100 mm. 30 Volt DC Supply
Dimming 1 - 10V and DALI
3D LED Flex 40Modular, flexible LED linear lighting systemThe Morgan 3D LED Flex system has been developed for use in indirect architectural lighting projects such as cove lighting and wall wash lighting applications where the building surfaces are non linear with curved profiles and facades.
The Morgan 3D LED Flex system incorporates an articulated joint system joining the LED heat sinks that allows the system to follow curved building surfaces while maintaining a constant 25 mm or 50 mm spacing between the LEDs thus ensuring continuous lit effects without shadows or dark areas.
The friction ball joint allows adjustment in three dimensions so that the system can be installed to follow complex building profiles. A variety of mounting hardware is available for many applications and custom mounts can be developed for specific projects.
After installation the individual modules can be adjusted by hand to optimise the light distribution. The ball joint design ensures that the modules will remain in position after adjustment and a locking mechanism is available.
Each LED heat sink module can operate up to 5 Watts of LEDs giving a total light output of up to 3,000 lumens per mtr depending on the colour temperature and LED type.
Extruded modules allow longer lengths to be produced for rectilinear spaces. The extruded modules link seamlessly with the 100 mm modules for continuous lighting without any dark areas.
The system has versions for both interior and exterior applications with IP ratings of IP 20, IP 44 and IP 65.
System efficiency depends on drive current and colour temperature of the LEDs. With 2,700 K 80 CRI LEDs run at 350 mA a typical system efficiency of over 60 lumens per circuit Watt is achieved.
T: + 44 ( 0 ) 20 8348 9003F: + 44 ( 0 ) 20 8348 6478 E: [email protected]
For sales in the USDesignplan Lighting Inc.79 Trenton AveFrenchtown NJ 08825USA
T: 908-996-7710F: 908-996-7042E: [email protected]
January 2013
Morgan Architectural Lighting10 Broadbent Close20 - 22 Highgate High Street London N6 5JWENGLAND UK
Products and literature designed by
4
Product Code Length
No. of LEDs per module CRI
ColourTemp. (K) Optics Feed
3D LED- FLEX 40
3D LED FLEX 40- extruded
7~7/8” to5’10~7/8”
Increments of 3~15/16”
4=25mm
2=50mm
LED- spacing
8090
27=2,700k30=3,000k35=3,500k40=4,000k45=4,500k50=5,000k
EndSideBack
Finish
Black
White
Any RAL- colour
Bracket Type
Direct fixing sideDirect fixing endAdjustableSpring Clip
IP
204465
Cover
ClearFilter
Create an order-code by selecting one option from each column in the table below.eg. 3D LED FLEX 40 . IP20 . 4 . 7~7/8” . 40K . CRI 80 . E . Adjustable . Clear. End . Black .
R 9~1/16"
R 2' 7~1/2"
R 8~9/32"
Segment Length - 3~15/16"
Min. bend radii:Concave - 2' 7~1/2"Convex - 8~9/32"Lateral - 9~1/16"
1~1/
4"
1~9/
16"
1~9/16"
2~5/
32"
1~3/
16"
1~25
/32"
1~9/16" 1~9/16"
1~9/
16"
1~9/
16"
1~9/16" 1~9/16"
3~15/16"
3~15/16"
3~15/16"
2~5/
32"
1~9/16"
1~9/
16"
3~15/16"
1~7/
8"
31/32" 31/32"
11~13/16"
1~9/
16"
1~7/
8"
120˚E(32+14˚)W (50˚)M (31˚)N (11˚)
