3D machining 13D machining 1

Contents

Model importModel import

The parts 3D model was imported into the Model folder, fixtures 3D models were imported into the Restrictions folder.

Part model

Folder containing imported model geometry

Import model geometry

Folders containing geometry of imported fixtures

Folders containing geometry of imported fixtures

Fixtures modelsFixtures models

Contents

The workpieceThe workpiece

Workpiece transparent view

Box around Part

The default workpiece is a box, it is built automatically around part.

Contents

The operationThe operation

Create new operation menu

Roughing waterline

Roughing operations group

New Roughing waterline operation

Contents

Roughing waterline Roughing waterline

Contents

Job assignmentJob assignment

Model of the part in the Model folder is automatically added as the operations part

Geometry model of the part

Models of fixtures in the Restrictions folder are automatically added to the restricted area of the operation

Geometry models of fixtures

Contents

Machining parametersMachining parameters

Contents

Machining strategyMachining strategy

Machining is performed by parallel passes

Set pass step to 30% of the tool diameter

Do not use trochoid

Contents

Toolpath calculationToolpath calculation

Toolpath calculation

Toolpath

Marks that the calculation is successful

Contents

Machining simulationMachining simulation

Tool

Workpiece

ИнструментFixtures

Machining result

Остаточный материал под прихватами

Leftover material under the fixtures

Contents

Функция создания операции

Next operationNext operation

Create operation menu

Finishing operations group

Complex

Finishing complex

Finishing Plane

Finishing Plane

Contents

Complex machiningComplex machining

Finishing waterline Finishing plane

Complex finishing

Residual material Residual

material

Minimum residual material

Contents

Job assignmentJob assignment

Par t of the previous operation

When new operation is created its part is set to the part of the previous operation by default. In our example the part is assigned for both member operations of the Finishing complex operation. Fixtures restrictions are not applied to this operation.

Contents

Finishing plane parametersFinishing plane parameters

Contents

Finishing waterline parametersFinishing waterline parameters

Contents

Toolpath calculationToolpath calculation

Toolpath calculation

Toolpath

Indicates that calculation is succesful

Contents

Machining simulationMachining simulation

Tool

Holder

Residual material of previous operation

Turn off “Shade plus Ware” and turn on “Shade”

Machining result

Contents

New operationNew operation

Create operation menu

Roughing operations group

2D contouring

New 2D contouring operation

Contents

Job assignmentJob assignment

Curve selection dialog

Equidistant contour

Job assignment tab

Select curve

Contents

Machining parametersMachining parameters

Contents

Toolpath calculationToolpath calculation

Toolpath calculation

Toolpath

Indicates that toolpath calculation is successful

Contents

Machining simulationMachining simulation

Residual material of previous machining

ToolMachining result

Contents

Tools list creationTools list creation

Create tool list

Tool list dialogView configuration

Object visibility panel

Document template

Contents

Tools listTools list

List of operations

Document template

List of toolsMachining time

Geometry model views

Contents

PostprocessorsPostprocessors

NC-program generation

Postprocessor file

NC-program file name

NC-program listing

Contents