Paramount Industries / a brand of HazLoc Industries, LLC 800-521-5405 Fax 800-852-7154 www.paramountlighting.com PARAMOUNTINDUSTRIES Starduster ® & Craft Lite ® In-Row Details REVISED 4/2019 When ordering C-Series Starduster® or Craft Lite® luminaires, help us process the order quickly by designating if these luminaires are mounting IN-ROW or as INDIVIDUAL units. Why do we need to know IN-ROW information when processing these orders? Paramount C-Series luminaires are manufactured with a continuously welded hub (see photo above) in the ends which provide a sealed wire way access. Therefore, they are NOT interchangeable in the field because the hub is welded in place and cannot be removed. By supplying ROW INFORMATION upon ordering, it will guarantee a timely delivery and allow the order to quickly move through our system. Refer to the helpful IN-ROW Worksheet on the follow page, and located on our website under Tech References. The C-Series Starduster® & Craft Lite® In-Row option (designated by adding a -M3 to the model number) is a feature which separates Paramount from other competitors’ luminaires. These specially designed luminaires have a unique, integral means of attaching consecutive fixtures utilizing aligner pins and plastic grommets (see photo above). This method of attachment, along with a gasketed stainless steel joiner band, achieves the alignment and integrity of a single fixture. Paramount recommends only surface mounting for the In-Row option. The -M3 In-Row Option for C-Series luminaires For C-Series luminaires, INDIVIDUAL UNITS ARe STANDARD and are supplied with a continuously welded hub in the ends. If In-Row mounting is desired, add -M3 to the model number and supply ROW configuration. Individual Unit Continuously Welded Hub The -M3 In-Row Joiner Band detail Note: In-Row option NOT available for the C1 Series luminaires. See IN-ROW Worksheet on page 2
Transcript
Paramount Industries / a brand of HazLoc Industries, LLC 800-521-5405 Fax 800-852-7154 www.paramountlighting.comPARAMOUNTI N D U S T R I E S
Starduster ®& Craft Lite® In-Row Details
REVISED 4/2019
When ordering C-Series Starduster® or Craft Lite® luminaires, help us process the order quickly by designating if these luminaires are mounting IN-ROW or as INDIVIDUAL units. Why do we need to know IN-ROW information when processing these orders? Paramount C-Series luminaires are manufactured with a continuously welded hub (see photo above) in the ends which provide a sealed wire way access. Therefore, they are NOT interchangeable in the field because the hub is welded in place and cannot be removed. By supplying ROW INFORMATION upon ordering, it will guarantee a timely delivery and allow the order to quickly move through our system. Refer to the helpful IN-ROW Worksheet on the follow page, and located on our website under Tech References.
The C-Series Starduster® & Craft Lite® In-Row option (designated by adding a -M3 to the model number) is a feature which separates Paramount from other competitors’ luminaires. These specially designed luminaires have a unique, integral means of attaching consecutive fixtures utilizing aligner pins and plastic grommets (see photo above). This method of attachment, along with a gasketed stainless steel joiner band, achieves the alignment and integrity of a single fixture. Paramount recommends only surface mounting for the In-Row option.
The -M3 In-Row Option for C-Series luminaires
For C-Series luminaires, INDIVIDUAL UNITS ARe STANDARD and are supplied with a continuously welded hub in the ends. If In-Row mounting is desired, add -M3 to the model number and supply ROW configuration.
Individual Unit Continuously Welded Hub The -M3 In-Row Joiner Band detail
Note: In-Row option NOT available for the C1 Series luminaires.
Paramount Industries / a brand of HazLoc Industries, LLC 800-521-5405 Fax 800-852-7154 www.paramountlighting.comPARAMOUNTI N D U S T R I E S
Starduster ®& Craft Lite® In-Row
REVISED 4/2019
Date: __________
Agency: __________________________________ Project Name or Number: ____________________________________
IMPORTANT NOTE:C-Series luminaires ship as INDIVIDUAL UNITS as standard policy, unless the -M3 In-Row Mounting Option is selected. In-Row mounting information is mandatory for processing Craft Lite orders. Middle and end units are NOT interchangeable. They are manufactured with aligner pins which CANNOT BE MODIFIED OR RECONFIGURED IN THE FIELD without voiding our warranty. In-Row configurations utilize Joiner Bands, which are included with the -M3 option.
When In-Row, we need a SPECIFIC COUNT on MIDDLE UNITS and on END UNITS. To determine the correct quantities, fill in the blanks below. Fax this page back to Paramount Industries at 800-852-7154 or send via email [email protected]
Determining Quantities of -M3 In-Row Option Middle and End Units:
C-Series Product Model Number: ______________________To calculate In-Row information correctly, it’s important to utilize the “C” dimension as shown on a specific spec sheet, because lengths may vary from series to series.
