3sDatasheet - Plastic met - PVC-U
Version: ver.1.1 - 2015-09-23 Legend:
Dimension unit mm ver.1.1: Union, Flange & Valves (added 80+ parts)
Metric PVC-U Pipe SystemPipe-tool 3skeng group Description Details
PVC-U Pipe (mm) PN4, gray
Metric PVC-U Pipe acc. to DIN 8061, Series
SDR51, nominal pressure PN4, Dimension acc.
to DIN EN ISO 15493 & DIN 8062, color: RAL
7011
PVC-U (Unplastizised Polyvinyl Chloride) piping typically used for non
flammable liquids for water-/ wastewater distribution/ treatment,
drainage or chemical applications. PVC-U has good chemical resistance. In
case of fire hydrogen chloride, dioxins and aromatics occur. PVC-U offers
often the best value for money. The pressure safety factor should be
equal or more then 2.
Pipe acc. to DIN 8061, Dimension acc. to DIN EN ISO 15493 & DIN 8062.
Joining Method: Solvent Cement Jointing
Recommended Temperature Range: 0°C to +60°
PVC-U Pipe (mm) PN6, gray
Metric PVC-U Pipe, Series SDR34.3, nominal
pressure PN6, color: RAL 7011
PVC-U (Unplastizised Polyvinyl Chloride) piping typically used for non
flammable liquids for water-/ wastewater distribution/ treatment,
drainage or chemical applications. PVC-U has good chemical resistance. In
case of fire hydrogen chloride, dioxins and aromatics occur. PVC-U offers
often the best value for money. The pressure safety factor should be
equal or more then 2.
Pipe acc. to DIN 8061, Dimension acc. to DIN EN ISO 15493 & DIN 8062.
Joining Method: Solvent Cement Jointing
Recommended Temperature Range: 0°C to +60°
PVC-U Pipe (mm) PN10, gray
Metric PVC-U Pipe, Series S10 SDR21, nominal
pressure PN10, color: RAL 7011
PVC-U (Unplastizised Polyvinyl Chloride) piping typically used for non
flammable liquids for water-/ wastewater distribution/ treatment,
drainage or chemical applications. PVC-U has good chemical resistance. In
case of fire hydrogen chloride, dioxins and aromatics occur. PVC-U offers
often the best value for money. The pressure safety factor should be
equal or more then 2.
Pipe acc. to DIN 8061, Dimension acc. to DIN EN ISO 15493 & DIN 8062.
Joining Method: Solvent Cement Jointing
Recommended Temperature Range: 0°C to +60°
PVC-U Pipe (mm) PN16, gray
Metric PVC-U Pipe, Series S6.3 SDR13.6,
nominal pressure PN16, color: RAL 7011
PVC-U (Unplastizised Polyvinyl Chloride) piping typically used for non
flammable liquids for water-/ wastewater distribution/ treatment,
drainage or chemical applications. PVC-U has good chemical resistance. In
case of fire hydrogen chloride, dioxins and aromatics occur. PVC-U offers
often the best value for money. The pressure safety factor should be
equal or more then 2.
Pipe acc. to DIN 8061, Dimension acc. to DIN EN ISO 15493 & DIN 8062.
Joining Method: Solvent Cement Jointing
Recommended Temperature Range: 0°C to +60°
(c) SHK Engineering and Consulting GmbH&Co. KG - www.shk.com 1 / 26 3sDatasheet - Plastic met - PVC-U^ver.1.1 - 2015-09-23.xlsx
3sDatasheet - Plastic met - PVC-U
Version: ver.1.1 - 2015-09-23 Legend:
Dimension unit mm ver.1.1: Union, Flange & Valves (added 80+ parts)
Metric PVC-U Pipe SystemPipe-tool 3skeng group Description Details
PVC-U Pipe (mm) PN16 (SDR9), gray
Metric PVC-U Pipe, Series S4 SDR9, nominal
pressure PN16, color: RAL 7011
PVC-U (Unplastizised Polyvinyl Chloride) piping typically used for non
flammable liquids for water-/ wastewater distribution/ treatment,
drainage or chemical applications. PVC-U has good chemical resistance. In
case of fire hydrogen chloride, dioxins and aromatics occur. PVC-U offers
often the best value for money. The pressure safety factor should be
equal or more then 2.
Pipe acc. to DIN 8061, Dimension acc. to DIN EN ISO 15493 & DIN 8062.
Joining Method: Solvent Cement Jointing
Recommended Temperature Range: 0°C to +60°
PVC-U Pipe (mm) PN4, transparent
Metric PVC-U Pipe, Series S25 SDR51, nominal
pressure PN4, color: transparent
PVC-U (Unplastizised Polyvinyl Chloride) piping typically used for non
flammable liquids for water-/ wastewater distribution/ treatment,
drainage or chemical applications. PVC-U has good chemical resistance. In
case of fire hydrogen chloride, dioxins and aromatics occur. PVC-U offers
often the best value for money. The pressure safety factor should be
equal or more then 2.
Pipe acc. to DIN 8061, Dimension acc. to DIN EN ISO 15493 & DIN 8062.
Joining Method: Solvent Cement Jointing
Recommended Temperature Range: 0°C to +60°
PVC-U Pipe (mm) PN6, transparent
Metric PVC-U Pipe, Series S16.7 SDR34.3,
nominal pressure PN6, color: transparent
PVC-U (Unplastizised Polyvinyl Chloride) piping typically used for non
flammable liquids for water-/ wastewater distribution/ treatment,
drainage or chemical applications. PVC-U has good chemical resistance. In
case of fire hydrogen chloride, dioxins and aromatics occur. PVC-U offers
often the best value for money. The pressure safety factor should be
equal or more then 2.
Pipe acc. to DIN 8061, Dimension acc. to DIN EN ISO 15493 & DIN 8062.
Joining Method: Solvent Cement Jointing
Recommended Temperature Range: 0°C to +60°
PVC-U Pipe (mm) PN10, transparent
Metric PVC-U Pipe, Series S10 SDR21, nominal
pressure PN10, color: transparent
PVC-U (Unplastizised Polyvinyl Chloride) piping typically used for non
flammable liquids for water-/ wastewater distribution/ treatment,
drainage or chemical applications. PVC-U has good chemical resistance. In
case of fire hydrogen chloride, dioxins and aromatics occur. PVC-U offers
often the best value for money. The pressure safety factor should be
equal or more then 2.
Pipe acc. to DIN 8061, Dimension acc. to DIN EN ISO 15493 & DIN 8062.
Joining Method: Solvent Cement Jointing
Recommended Temperature Range: 0°C to +60°
(c) SHK Engineering and Consulting GmbH&Co. KG - www.shk.com 2 / 26 3sDatasheet - Plastic met - PVC-U^ver.1.1 - 2015-09-23.xlsx
3sDatasheet - Plastic met - PVC-U
Version: ver.1.1 - 2015-09-23 Legend:
Dimension unit mm ver.1.1: Union, Flange & Valves (added 80+ parts)
Metric PVC-U Pipe SystemPipe-tool 3skeng group Description Details
PVC-U Pipe (mm) PN16, transparent
Metric PVC-U Pipe, Series S6.25 SDR13.5,
nominal pressure PN16, color: transparent
PVC-U (Unplastizised Polyvinyl Chloride) piping typically used for non
flammable liquids for water-/ wastewater distribution/ treatment,
drainage or chemical applications. PVC-U has good chemical resistance. In
case of fire hydrogen chloride, dioxins and aromatics occur. PVC-U offers
often the best value for money. The pressure safety factor should be
equal or more then 2.
Pipe acc. to DIN 8061, Dimension acc. to DIN EN ISO 15493 & DIN 8062.
Joining Method: Solvent Cement Jointing
Recommended Temperature Range: 0°C to +60°
PVC-U Elbow (mm), gray
Metric PVC-U Elbow, 45° and 90°, long and
short, color: RAL 7011 Solvent Cement Jointing
PVC-U Tee (mm), gray
Metric PVC-U Tee, straight and reducing, 90
and 45° branch, color: RAL 7011 Solvent Cement Jointing
PVC-U Reducing Bush (mm), gray
Metric PVC-U Reducing Bush, short and long,
color: RAL 7011 Solvent Cement Jointing
PVC-U Cap (mm), gray Metric PVC-U cap, color: RAL 7011 Solvent Cement Jointing
PVC-U Cross (mm), gray Metric PVC-U Cross, color: RAL 7011 Solvent Cement Jointing
PVC-U Coupling Socket (mm), gray
Metric PVC-U Coupling Socket, color: RAL
7011 Solvent Cement Jointing
PVC-U Coupling Socket (mm), transp. Metric PVC-U Coupling Socket, color: transp. Solvent Cement Jointing
PVC-U Coupling Nipple (mm), gray
Metric PVC-U Coupling Nipple, color: RAL
7011 Solvent Cement Jointing
PVC-U Flange
Metric PVC-U Fixed and Loose Flange
Assembly according EN1992-1 PN10, color:
RAL 7011 Solvent Cement Jointing, Flange
PVC-U Blind Flange
Metric PVC-U Blind Flange Assembly
according EN1992-1 PN10, color: RAL 7011 Flange
PVC-U Threaded Union Metric PVC-U Threaded Union Solvent Cement Jointing
PVC-U Flowmeter Metric PVC-U Flowmeter Solvent Cement Jointing
(c) SHK Engineering and Consulting GmbH&Co. KG - www.shk.com 3 / 26 3sDatasheet - Plastic met - PVC-U^ver.1.1 - 2015-09-23.xlsx
3sDatasheet - Plastic met - PVC-U
Version: ver.1.1 - 2015-09-23 Legend:
Dimension unit mm ver.1.1: Union, Flange & Valves (added 80+ parts)
Metric PVC-U Pipe SystemPipe-tool 3skeng group Description Details
PVC-U Pressure Regulating Valve (mm), gray
Metric PVC-U Pressure Regulating Valve,
color: RAL 7011 Solvent Cement Jointing
PVC-U Ball, Diaphragm and Butterfly Valve
(mm), gray
Metric PVC-U Manual Ball, Diaphragm and
Butterfly Valve, color: RAL 7011 Solvent Cement Jointing
(c) SHK Engineering and Consulting GmbH&Co. KG - www.shk.com 4 / 26 3sDatasheet - Plastic met - PVC-U^ver.1.1 - 2015-09-23.xlsx
3sDatasheet - Plastic met - PVC-U
Metric Pipe with pipe ends for solvent cement joints
lenght dimension unit = mmD
escr
pti
on
No
min
al s
ize
3sk
en
g si
ze
Cla
ss
Pre
fere
ce
(hig
h/l
ow
)
PipePipe d75mm d75 PN4 high
Pipe d90mm d90 PN4 high
Pipe d110mm d110 PN4 high
Pipe d125mm d125 PN4
Pipe d140mm d140 PN4 high
Pipe d160mm d160 PN4 high
Pipe d180mm d180 PN4 low
Pipe d200mm d200 PN4 high
Pipe d225mm d225 PN4 high
Pipe d250mm d250 PN4
Pipe d280mm d280 PN4 high
Pipe d315mm d315 PN4 high
Pipe d50mm d50 PN6 high
Pipe d63mm d63 PN6 high
Pipe d75mm d75 PN6 high
Pipe d90mm d90 PN6 high
Pipe d110mm d110 PN6 high
Pipe d125mm d125 PN6
Pipe d140mm d140 PN6 high
Pipe d160mm d160 PN6 high
Pipe d180mm d180 PN6 low
Pipe d200mm d200 PN6 high
Pipe d225mm d225 PN6 high
Pipe d250mm d250 PN6
Pipe d315mm d315 PN6 high
Pipe d355mm d355 PN6
Pipe d400mm d400 PN6
Pipe d25mm d25 PN10 high
Pipe d32mm d32 PN10 high
Pipe d40mm d40 PN10 high
Pipe d50mm d50 PN10 high
Pipe d63mm d63 PN10 high
Pipe d75mm d75 PN10 high
Pipe d90mm d90 PN10 high
Pipe d110mm d110 PN10 high
Pipe d125mm d125 PN10
(c) SHK Engineering and Consulting GmbH&Co. KG - www.shk.com 5 / 26 3sDatasheet - Plastic met - PVC-U^ver.1.1 - 2015-09-23.xlsx
Des
crp
tio
n
No
min
al s
ize
3sk
en
g si
ze
Cla
ss
Pre
fere
ce
(hig
h/l
ow
)
PipePipe d140mm d140 PN10 high
Pipe d160mm d160 PN10 high
Pipe d180mm d180 PN10 low
Pipe d200mm d200 PN10 high
Pipe d225mm d225 PN10 high
Pipe d250mm d250 PN10
Pipe d280mm d280 PN10 high
Pipe d12mm d12 PN16 high
Pipe d16mm d16 PN16 high
Pipe d20mm d20 PN16 high
Pipe d25mm d25 PN16 high
Pipe d32mm d32 PN16 high
Pipe d40mm d40 PN16 high
Pipe d50mm d50 PN16 high
Pipe d63mm d63 PN16 high
Pipe d75mm d75 PN16 high
Pipe d90mm d90 PN16 high
Pipe d110mm d110 PN16 high
Pipe d125mm d125 PN16
Pipe d140mm d140 PN16 high
Pipe d160mm d160 PN16 high
Pipe d6mm d6 PN16(SDR9)
Pipe d8mm d8 PN16(SDR9)
Pipe d10mm d10 PN16(SDR9)
Pipe d12mm d12 PN16(SDR9)
Pipe d16mm d16 PN16(SDR9)
Pipe d20mm d20 PN16(SDR9)
Pipe d25mm d25 PN16(SDR9)
Pipe d32mm d32 PN16(SDR9)
Pipe d40mm d40 PN16(SDR9)
Pipe d50mm d50 PN16(SDR9)
Pipe d63mm d63 PN16(SDR9)
Pipe d75mm d75 PN16(SDR9)
Pipe d90mm d90 PN16(SDR9)
Pipe d110mm d110 PN16(SDR9)
Pipe d63mm d63 PN4 high
Pipe d75mm d75 PN4 high
Pipe d90mm d90 PN4 high
Pipe d110mm d110 PN4 high
Pipe d125mm d125 PN4
Pipe d140mm d140 PN4 high
Pipe d160mm d160 PN4 high
(c) SHK Engineering and Consulting GmbH&Co. KG - www.shk.com 6 / 26 3sDatasheet - Plastic met - PVC-U^ver.1.1 - 2015-09-23.xlsx
Des
crp
tio
n
No
min
al s
ize
3sk
en
g si
ze
Cla
ss
Pre
fere
ce
(hig
h/l
ow
)
PipePipe d200mm d200 PN4 high
Pipe d225mm d225 PN4 high
Pipe d250mm d250 PN4
Pipe d280mm d280 PN4 high
Pipe d50mm d50 PN6 high
Pipe d160mm d160 PN6 high
Pipe d25mm d25 PN10 high
Pipe d32mm d32 PN10 high
Pipe d40mm d40 PN10 high
Pipe d50mm d50 PN10 high
Pipe d63mm d63 PN10 high
Pipe d75mm d75 PN10 high
Pipe d90mm d90 PN10 high
Pipe d110mm d110 PN10 high
Pipe d12mm d12 PN16 high
Pipe d16mm d16 PN16 high
Pipe d20mm d20 PN16 high
Pipe d25mm d25 PN16 high
Pipe d32mm d32 PN16 high
Pipe d40mm d40 PN16 high
Pipe d50mm d50 PN16 high
Pipe d63mm d63 PN16 high
(c) SHK Engineering and Consulting GmbH&Co. KG - www.shk.com 7 / 26 3sDatasheet - Plastic met - PVC-U^ver.1.1 - 2015-09-23.xlsx
3sDatasheet - Plastic met - PVC-U
Metric Elbow with socket ends for solvent cement joints
lenght dimension unit = mmD
escr
pti
on
No
min
al s
ize
3sk
en
g si
ze
Cla
ss
Pro
per
ty
An
gle
ElbowBend 90° d20mm d20 PN16 r=2d 90
Bend 90° d25mm d25 PN16 r=2d 90
Bend 90° d32mm d32 PN16 r=2d 90
Bend 90° d40mm d40 PN16 r=2d 90
Bend 90° d50mm d50 PN16 r=2d 90
Bend 90° d63mm d63 PN16 r=2d 90
Bend 90° d75mm d75 PN16 r=2d 90
Bend 90° d90mm d90 PN16 r=2d 90
Bend 90° d110mm d110 PN16 r=2d 90
Bend 90° d140mm d140 PN16 r=2d 90
Bend 90° d160mm d160 PN16 r=2d 90
Elbow 45° short d16mm d16 PN16 45
Elbow 45° short d20mm d20 PN16 45
Elbow 45° short d25mm d25 PN16 45
Elbow 45° short d32mm d32 PN16 45
Elbow 45° short d40mm d40 PN16 45
Elbow 45° short d50mm d50 PN16 45
Elbow 45° short d63mm d63 PN16 45
Elbow 45° short d75mm d75 PN16 45
Elbow 45° short d90mm d90 PN16 45
Elbow 45° short d110mm d110 PN16 45
Elbow 45° short d125mm d125 PN16 45
Elbow 45° short d140mm d140 PN16 45
Elbow 45° short d160mm d160 PN16 45
Elbow 45° short d200mm d200 PN10 45
Elbow 45° short d225mm d225 PN10 45
Elbow 45° short d250mm d250 PN10 45
Elbow 45° short d280mm d280 PN10 45
Elbow 45° short d315mm d315 PN10 45
Elbow 45° short d400mm d400 PN6 45
Elbow 90° short d6mm d6 PN16 90
Elbow 90° short d8mm d8 PN16 90
Elbow 90° short d10mm d10 PN16 90
Elbow 90° short d12mm d12 PN16 90
Elbow 90° short d16mm d16 PN16 90
Elbow 90° short d20mm d20 PN16 90
(c) SHK Engineering and Consulting GmbH&Co. KG - www.shk.com 8 / 26 3sDatasheet - Plastic met - PVC-U^ver.1.1 - 2015-09-23.xlsx
Des
crp
tio
n
No
min
al s
ize
3sk
en
g si
ze
Cla
ss
Pro
per
ty
An
gle
ElbowElbow 90° short d25mm d25 PN16 90
Elbow 90° short d32mm d32 PN16 90
Elbow 90° short d40mm d40 PN16 90
Elbow 90° short d50mm d50 PN16 90
Elbow 90° short d63mm d63 PN16 90
Elbow 90° short d75mm d75 PN16 90
Elbow 90° short d90mm d90 PN16 90
Elbow 90° short d110mm d110 PN16 90
Elbow 90° short d125mm d125 PN16 90
Elbow 90° short d140mm d140 PN16 90
Elbow 90° short d160mm d160 PN16 90
Elbow 90° short d200mm d200 PN10 90
Elbow 90° short d225mm d225 PN10 90
Elbow 90° short d250mm d250 PN10 90
Elbow 90° d225mm d225 PN10 r=0,75d 90
Elbow 90° d280mm d280 PN10 r=0,75d 90
Elbow 90° d315mm d315 PN10 r=0,75d 90
Elbow 90° d400mm d400 PN6 r=0,75d 90
(c) SHK Engineering and Consulting GmbH&Co. KG - www.shk.com 9 / 26 3sDatasheet - Plastic met - PVC-U^ver.1.1 - 2015-09-23.xlsx
3sDatasheet - Plastic met - PVC-U
Metric Tee with socket ends for solvent cement joints
lenght dimension unit = mmD
escr
pti
on
No
min
al s
ize
3sk
en
g si
ze 0
3sk
en
g si
ze 1
3sk
en
g si
ze 2
Cla
ss
TeeTee straight 45° d10mm-d10mm d10 d10 d10 PN10
Tee straight 45° d12mm-d12mm d12 d12 d12 PN10
Tee straight 45° d16mm-d16mm d16 d16 d16 PN10
Tee straight 45° d20mm-d20mm d20 d20 d20 PN10
Tee straight 45° d25mm-d25mm d25 d25 d25 PN10
Tee straight 45° d32mm-d32mm d32 d32 d32 PN10
Tee straight 45° d40mm-d40mm d40 d40 d40 PN10
Tee straight 45° d50mm-d50mm d50 d50 d50 PN10
Tee straight 45° d63mm-d63mm d63 d63 d63 PN10
Tee straight 45° d75mm-d75mm d75 d75 d75 PN6
Tee straight 45° d90mm-d90mm d90 d90 d90 PN6
Tee straight 45° d110mm-d110mm d110 d110 d110 PN6
Tee straight 45° d125mm-d125mm d125 d125 d125 PN6
Tee straight 45° d140mm-d140mm d140 d140 d140 PN5
Tee straight 45° d160mm-d160mm d160 d160 d160 PN6
Tee straight 45° d200mm-d200mm d200 d200 d200 PN6
Tee straight 45° d225mm-d225mm d225 d225 d225 PN6
Tee straight 45° d250mm-d250mm d250 d250 d250 PN6
Tee straight 90° d6mm-d6mm d6 d6 d6 PN16
Tee straight 90° d8mm-d8mm d8 d8 d8 PN16
Tee straight 90° d10mm-d10mm d10 d10 d10 PN16
Tee straight 90° d12mm-d12mm d12 d12 d12 PN16
Tee straight 90° d16mm-d16mm d16 d16 d16 PN16
Tee straight 90° d20mm-d20mm d20 d20 d20 PN16
Tee straight 90° d25mm-d25mm d25 d25 d25 PN16
Tee straight 90° d32mm-d32mm d32 d32 d32 PN16
Tee straight 90° d40mm-d40mm d40 d40 d40 PN16
Tee straight 90° d50mm-d50mm d50 d50 d50 PN16
Tee straight 90° d63mm-d63mm d63 d63 d63 PN16
Tee straight 90° d75mm-d75mm d75 d75 d75 PN16
Tee straight 90° d90mm-d90mm d90 d90 d90 PN16
Tee straight 90° d110mm-d110mm d110 d110 d110 PN16
Tee straight 90° d125mm-d125mm d125 d125 d125 PN16
Tee straight 90° d140mm-d140mm d140 d140 d140 PN16
Tee straight 90° d160mm-d160mm d160 d160 d160 PN16
Tee straight 90° d200mm-d200mm d200 d200 d200 PN10
(c) SHK Engineering and Consulting GmbH&Co. KG - www.shk.com 10 / 26 3sDatasheet - Plastic met - PVC-U^ver.1.1 - 2015-09-23.xlsx
Des
crp
tio
n
No
min
al s
ize
3sk
en
g si
ze 0
3sk
en
g si
ze 1
3sk
en
g si
ze 2
Cla
ss
TeeTee straight 90° d225mm-d225mm d225 d225 d225 PN10
Tee straight 90° d250mm-d250mm d250 d250 d250 PN10
Tee straight 90° d280mm-d280mm d280 d280 d280 PN10
Tee straight 90° d315mm-d315mm d315 d315 d315 PN10
Tee straight 90° d400mm-d400mm d400 d400 d400 PN6
Tee reduced 90° d25mm-d20mm d25 d25 d20 PN16
Tee reduced 90° d32mm-d20mm d32 d32 d20 PN16
Tee reduced 90° d32mm-d25mm d32 d32 d25 PN16
Tee reduced 90° d40mm-d20mm d40 d40 d20 PN16
Tee reduced 90° d40mm-d25mm d40 d40 d25 PN16
Tee reduced 90° d40mm-d32mm d40 d40 d32 PN16
Tee reduced 90° d50mm-d20mm d50 d50 d20 PN16
Tee reduced 90° d50mm-d25mm d50 d50 d25 PN16
Tee reduced 90° d50mm-d32mm d50 d50 d32 PN16
Tee reduced 90° d50mm-d40mm d50 d50 d40 PN16
Tee reduced 90° d63mm-d25mm d63 d63 d25 PN16
Tee reduced 90° d63mm-d32mm d63 d63 d32 PN16
Tee reduced 90° d63mm-d40mm d63 d63 d40 PN16
Tee reduced 90° d63mm-d50mm d63 d63 d50 PN16
Tee reduced 90° d75mm-d32mm d75 d75 d32 PN16
Tee reduced 90° d75mm-d40mm d75 d75 d40 PN16
Tee reduced 90° d75mm-d50mm d75 d75 d50 PN16
Tee reduced 90° d75mm-d63mm d75 d75 d63 PN16
Tee reduced 90° d90mm-d32mm d90 d90 d32 PN16
Tee reduced 90° d90mm-d50mm d90 d90 d50 PN16
Tee reduced 90° d90mm-d63mm d90 d90 d63 PN16
Tee reduced 90° d90mm-d75mm d90 d90 d75 PN16
Tee reduced 90° d110mm-d32mm d110 d110 d32 PN16
Tee reduced 90° d110mm-d50mm d110 d110 d50 PN16
Tee reduced 90° d110mm-d63mm d110 d110 d63 PN16
Tee reduced 90° d110mm-d75mm d110 d110 d75 PN16
Tee reduced 90° d110mm-d90mm d110 d110 d90 PN16
Tee reduced 90° d125mm-d50mm d125 d125 d50 PN16
Tee reduced 90° d125mm-d90mm d125 d125 d90 PN16
Tee reduced 90° d140mm-d50mm d140 d140 d50 PN16
Tee reduced 90° d140mm-d75mm d140 d140 d75 PN16
Tee reduced 90° d140mm-d110mm d140 d140 d110 PN16
Tee reduced 90° d160mm-d110mm d160 d160 d110 PN16
Tee reduced 90° d200mm-d110mm d200 d200 d110 PN10
Tee reduced 90° d200mm-d160mm d200 d200 d160 PN10
Tee reduced 90° d225mm-d110mm d225 d225 d110 PN10
Tee reduced 90° d225mm-d160mm d225 d225 d160 PN10
(c) SHK Engineering and Consulting GmbH&Co. KG - www.shk.com 11 / 26 3sDatasheet - Plastic met - PVC-U^ver.1.1 - 2015-09-23.xlsx
Des
crp
tio
n
No
min
al s
ize
3sk
en
g si
ze 0
3sk
en
g si
ze 1
3sk
en
g si
ze 2
Cla
ss
TeeTee reduced 90° d250mm-d160mm d250 d250 d160 PN10
Tee reduced 90° d250mm-d200mm d250 d250 d200 PN10
Tee reduced 90° d280mm-d160mm d280 d280 d160 PN10
Tee reduced 90° d280mm-d225mm d280 d280 d225 PN10
Tee reduced 90° d315mm-d160mm d315 d315 d160 PN10
Tee reduced 90° d315mm-d225mm d315 d315 d225 PN10
Tee reduced 90° d400mm-d225mm d400 d400 d225 PN6
Tee reduced 90° d400mm-d315mm d400 d400 d315 PN6
(c) SHK Engineering and Consulting GmbH&Co. KG - www.shk.com 12 / 26 3sDatasheet - Plastic met - PVC-U^ver.1.1 - 2015-09-23.xlsx
3sDatasheet - Plastic met - PVC-U
Metric Reducing Bushing with socket ends for solvent cement joints
lenght dimension unit = mmD
escr
pti
on
No
min
al s
ize
3sk
en
g si
ze 0
3sk
en
g si
ze 1
Cla
ss
Reducing BushingReducing bush long d8mm-d6mm d8 d6 PN16
Reducing bush long d10mm-d6mm d10 d6 PN16
Reducing bush long d10mm-d8mm d10 d8 PN16
Reducing bush long d20mm-d16mm d20 d16 PN16
Reducing bush long d25mm-d20mm d25 d20 PN16
Reducing bush long d32mm-d25mm d32 d25 PN16
Reducing bush long d40mm-d32mm d40 d32 PN16
Reducing bush long d50mm-d40mm d50 d40 PN16
Reducing bush long d63mm-d50mm d63 d50 PN16
Reducing bush long d75mm-d63mm d75 d63 PN16
Reducing bush long d90mm-d75mm d90 d75 PN16
Reducing bush long d140mm-d110mm d140 d110 PN16
Reducing bush short d12mm-d8mm d12 d8 PN16
Reducing bush short d16mm-d12mm d16 d12 PN16
Reducing bush short d20mm-d16mm d20 d16 PN16
Reducing bush short d25mm-d20mm d25 d20 PN16
Reducing bush short d32mm-d20mm d32 d20 PN16
Reducing bush short d32mm-d25mm d32 d25 PN16
Reducing bush short d40mm-d20mm d40 d20 PN16
Reducing bush short d40mm-d25mm d40 d25 PN16
Reducing bush short d40mm-d32mm d40 d32 PN16
Reducing bush short d50mm-d20mm d50 d20 PN16
Reducing bush short d50mm-d25mm d50 d25 PN16
Reducing bush short d50mm-d32mm d50 d32 PN16
Reducing bush short d50mm-d40mm d50 d40 PN16
Reducing bush short d63mm-d32mm d63 d32 PN16
Reducing bush short d63mm-d40mm d63 d40 PN16
Reducing bush short d63mm-d50mm d63 d50 PN16
Reducing bush short d75mm-d50mm d75 d50 PN16
Reducing bush short d75mm-d63mm d75 d63 PN16
Reducing bush short d90mm-d50mm d90 d50 PN16
Reducing bush short d90mm-d63mm d90 d63 PN16
Reducing bush short d90mm-d75mm d90 d75 PN16
Reducing bush short d110mm-d50mm d110 d50 PN16
Reducing bush short d110mm-d63mm d110 d63 PN16
Reducing bush short d110mm-d75mm d110 d75 PN16
(c) SHK Engineering and Consulting GmbH&Co. KG - www.shk.com 13 / 26 3sDatasheet - Plastic met - PVC-U^ver.1.1 - 2015-09-23.xlsx
Des
crp
tio
n
No
min
al s
ize
3sk
en
g si
ze 0
3sk
en
g si
ze 1
Cla
ss
Reducing BushingReducing bush short d110mm-d90mm d110 d90 PN16
Reducing bush short d125mm-d90mm d125 d90 PN16
Reducing bush short d125mm-d110mm d125 d110 PN16
Reducing bush short d140mm-d90mm d140 d90 PN16
Reducing bush short d140mm-d110mm d140 d110 PN16
Reducing bush short d140mm-d125mm d140 d125 PN16
Reducing bush short d160mm-d90mm d160 d90 PN16
Reducing bush short d160mm-d110mm d160 d110 PN16
Reducing bush short d160mm-d140mm d160 d140 PN16
Reducing bush short d200mm-d110mm d200 d110 PN10
Reducing bush short d200mm-d125mm d200 d125 PN10
Reducing bush short d200mm-d140mm d200 d140 PN10
Reducing bush short d200mm-d160mm d200 d160 PN10
Reducing bush short d225mm-d110mm d225 d110 PN10
Reducing bush short d225mm-d125mm d225 d125 PN10
Reducing bush short d225mm-d140mm d225 d140 PN10
Reducing bush short d225mm-d160mm d225 d160 PN10
Reducing bush short d225mm-d200mm d225 d200 PN10
Reducing bush short d250mm-d125mm d250 d125 PN10
Reducing bush short d250mm-d140mm d250 d140 PN10
Reducing bush short d250mm-d160mm d250 d160 PN10
Reducing bush short d250mm-d200mm d250 d200 PN10
Reducing bush short d250mm-d225mm d250 d225 PN10
Reducing bush short d280mm-d140mm d280 d140 PN10
Reducing bush short d280mm-d160mm d280 d160 PN10
Reducing bush short d280mm-d200mm d280 d200 PN10
Reducing bush short d280mm-d225mm d280 d225 PN10
Reducing bush short d280mm-d250mm d280 d250 PN10
Reducing bush short d315mm-d160mm d315 d160 PN10
Reducing bush short d315mm-d200mm d315 d200 PN10
Reducing bush short d315mm-d225mm d315 d225 PN10
Reducing bush short d315mm-d250mm d315 d250 PN10
Reducing bush short d315mm-d280mm d315 d280 PN10
Reducing bush short d355mm-d315mm d355 d315 PN6
Reducing bush short d400mm-d250mm d400 d250 PN6
Reducing bush short d400mm-d280mm d400 d280 PN6
Reducing bush short d400mm-d315mm d400 d315 PN6
Reducing bush short d400mm-d355mm d400 d355 PN6
(c) SHK Engineering and Consulting GmbH&Co. KG - www.shk.com 14 / 26 3sDatasheet - Plastic met - PVC-U^ver.1.1 - 2015-09-23.xlsx
3sDatasheet - Plastic met - PVC-U
Metric Cap with socket end for solvent cement joint
lenght dimension unit = mmD
escr
pti
on
No
min
al s
ize
3sk
en
g si
ze
Cla
ss
CapCap d12mm d12 PN16
Cap d16mm d16 PN16
Cap d20mm d20 PN16
Cap d25mm d25 PN16
Cap d32mm d32 PN16
Cap d40mm d40 PN16
Cap d50mm d50 PN16
Cap d63mm d63 PN16
Cap d75mm d75 PN16
Cap d90mm d90 PN16
Cap d110mm d110 PN16
Cap d140mm d140 PN10
Cap d160mm d160 PN10
(c) SHK Engineering and Consulting GmbH&Co. KG - www.shk.com 15 / 26 3sDatasheet - Plastic met - PVC-U^ver.1.1 - 2015-09-23.xlsx
3sDatasheet - Plastic met - PVC-U
Metric Cross with socket ends for solvent cement joints
lenght dimension unit = mmD
escr
pti
on
No
min
al s
ize
3sk
en
g si
ze
Cla
ss
CrossCross d12mm d12 PN16
Cross d16mm d16 PN16
Cross d20mm d20 PN16
Cross d25mm d25 PN16
Cross d32mm d32 PN16
Cross d40mm d40 PN16
Cross d50mm d50 PN16
Cross d63mm d63 PN16
Cross d75mm d75 PN10
Cross d90mm d90 PN10
Cross d110mm d110 PN10
(c) SHK Engineering and Consulting GmbH&Co. KG - www.shk.com 16 / 26 3sDatasheet - Plastic met - PVC-U^ver.1.1 - 2015-09-23.xlsx
3sDatasheet - Plastic met - PVC-U
Metric Coupling (Socket) with socket ends for solvent cement joints
lenght dimension unit = mmD
escr
pti
on
No
min
al s
ize
3sk
en
g si
ze
Cla
ss
Coupling (Socket)Coupling (socket) d6mm d6 PN16
Coupling (socket) d8mm d8 PN16
Coupling (socket) d10mm d10 PN16
Coupling (socket) d12mm d12 PN16
Coupling (socket) d16mm d16 PN16
Coupling (socket) d20mm d20 PN16
Coupling (socket) d25mm d25 PN16
Coupling (socket) d32mm d32 PN16
Coupling (socket) d40mm d40 PN16
Coupling (socket) d50mm d50 PN16
Coupling (socket) d63mm d63 PN16
Coupling (socket) d75mm d75 PN16
Coupling (socket) d90mm d90 PN16
Coupling (socket) d110mm d110 PN16
Coupling (socket) d125mm d125 PN16
Coupling (socket) d140mm d140 PN16
Coupling (socket) d160mm d160 PN16
Coupling (socket) d200mm d200 PN10
Coupling (socket) d225mm d225 PN10
Coupling (socket) d250mm d250 PN10
Coupling (socket) d280mm d280 PN10
Coupling (socket) d315mm d315 PN10
Coupling (socket) d355mm d355 PN6
Coupling (socket) d400mm d400 PN6
Coupling (socket) transp.d16mm d16 PN16
Coupling (socket) transp.d20mm d20 PN16
Coupling (socket) transp.d25mm d25 PN16
Coupling (socket) transp.d32mm d32 PN16
Coupling (socket) transp.d40mm d40 PN16
Coupling (socket) transp.d50mm d50 PN16
Coupling (socket) transp.d63mm d63 PN16
(c) SHK Engineering and Consulting GmbH&Co. KG - www.shk.com 17 / 26 3sDatasheet - Plastic met - PVC-U^ver.1.1 - 2015-09-23.xlsx
3sDatasheet - Plastic met - PVC-U
Metric Coupling (Nipple) with socket ends for solvent cement joints
lenght dimension unit = mmD
escr
pti
on
No
min
al s
ize
3sk
en
g si
ze
Cla
ss
Coupling (Nipple)Coupling (nipple) d16mm d16 PN16
Coupling (nipple) d20mm d20 PN16
Coupling (nipple) d25mm d25 PN16
Coupling (nipple) d32mm d32 PN16
Coupling (nipple) d40mm d40 PN16
Coupling (nipple) d50mm d50 PN16
Coupling (nipple) d63mm d63 PN16
Coupling (nipple) d75mm d75 PN16
Coupling (nipple) d90mm d90 PN16
Coupling (nipple) d110mm d110 PN16
Coupling (nipple) d125mm d125 PN16
Coupling (nipple) d140mm d140 PN16
Coupling (nipple) d160mm d160 PN16
Coupling (nipple) d200mm d200 PN10
Coupling (nipple) d225mm d225 PN10
(c) SHK Engineering and Consulting GmbH&Co. KG - www.shk.com 18 / 26 3sDatasheet - Plastic met - PVC-U^ver.1.1 - 2015-09-23.xlsx
3sDatasheet - Plastic met - PVC-U
Metric Flange with socket end for solvent cement joint
lenght dimension unit = mmD
escr
pti
on
No
min
al s
ize
3sk
en
g si
ze 0
3sk
en
g si
ze 1
Cla
ss
FlangeFixed Flange DN15-d20mm DN15 d20 PN16
Fixed Flange DN20-d25mm DN20 d25 PN16
Fixed Flange DN25-d32mm DN25 d32 PN16
Fixed Flange DN32-d40mm DN32 d40 PN16
Fixed Flange DN40-d50mm DN40 d50 PN16
Fixed Flange DN50-d63mm DN50 d63 PN16
Fixed Flange DN65-d75mm DN65 d75 PN10
Fixed Flange DN80-d90mm DN80 d90 PN10
Fixed Flange DN100-d110mm DN100 d110 PN10
Fixed Flange DN125-d140mm DN125 d140 PN10
Fixed Flange DN150-d160mm DN150 d160 PN10
Loose Flange Assembly DN15-d20mm DN15 d20 PN16
Loose Flange Assembly DN20-d25mm DN20 d25 PN16
Loose Flange Assembly DN25-d32mm DN25 d32 PN16
Loose Flange Assembly DN32-d40mm DN32 d40 PN16
Loose Flange Assembly DN40-d50mm DN40 d50 PN16
Loose Flange Assembly DN50-d63mm DN50 d63 PN16
Loose Flange Assembly DN65-d75mm DN65 d75 PN16
Loose Flange Assembly DN80-d90mm DN80 d90 PN16
Loose Flange Assembly DN100-d110mm DN100 d110 PN16
Loose Flange Assembly DN100-d125mm DN100 d125 PN16
Loose Flange Assembly DN125-d140mm DN125 d140 PN16
Loose Flange Assembly DN150-d160mm DN150 d160 PN16
Loose Flange Assembly DN200-d200mm DN200 d200 PN10
Loose Flange Assembly DN200-d225mm DN200 d225 PN10
Loose Flange Assembly DN250-d250mm DN250 d250 PN10
Loose Flange Assembly DN250-d280mm DN250 d280 PN10
Loose Flange Assembly DN300-d315mm DN300 d315 PN6
Loose Flange Assembly DN350-d355mm DN350 d355 PN6
Loose Flange Assembly DN400-d400mm DN400 d400 PN6
(c) SHK Engineering and Consulting GmbH&Co. KG - www.shk.com 19 / 26 3sDatasheet - Plastic met - PVC-U^ver.1.1 - 2015-09-23.xlsx
3sDatasheet - Plastic met - PVC-U
Metric Blind Flange Assembly
lenght dimension unit = mmD
escr
pti
on
No
min
al s
ize
Clo
sest
inch
3sk
en
g si
ze 0
Cla
ss
Blind Flange AssemblyBlind Flange Assembly DN15 1/2in DN15 PN10
Blind Flange Assembly DN20 3/4in DN20 PN10
Blind Flange Assembly DN25 1in DN25 PN10
Blind Flange Assembly DN32 1 1/4in DN32 PN10
Blind Flange Assembly DN40 1 1/2in DN40 PN10
Blind Flange Assembly DN50 2in DN50 PN10
Blind Flange Assembly DN65 2 1/2in DN65 PN10
Blind Flange Assembly DN80 3in DN80 PN10
Blind Flange Assembly DN100 4in DN100 PN10
Blind Flange Assembly DN125 5in DN125 PN10
Blind Flange Assembly DN150 6in DN150 PN10
Blind Flange Assembly DN200 9in DN200 PN10
Blind Flange Assembly DN250 10in DN250 PN10
Blind Flange Assembly DN300 12in DN300 PN6
Blind Flange Assembly DN350 14in DN350 PN6
Blind Flange Assembly DN400 16in DN400 PN6
(c) SHK Engineering and Consulting GmbH&Co. KG - www.shk.com 20 / 26 3sDatasheet - Plastic met - PVC-U^ver.1.1 - 2015-09-23.xlsx
3sDatasheet - Plastic met - PVC-U
Metric Threaded Union with socket ends for solvent cement joints
lenght dimension unit = mmD
escr
pti
on
No
min
al s
ize
3sk
en
g si
ze 0
3sk
en
g si
ze 1
Cla
ss
Threaded UnionUnion female d10mm G0,625in d10 PN16
Union female d12mm G0,625in d12 PN16
Union female d16mm G0,75in d16 PN16
Union female d20mm G1in d20 PN16
Union female d25mm G1,25in d25 PN16
Union female d32mm G1,5in d32 PN16
Union female d40mm G2in d40 PN16
Union female d50mm G2,25in d50 PN16
Union female d63mm G2,75in d63 PN16
Union female d75mm Tr108x5 d75 PN10
Union female d90mm Tr128x5 d90 PN10
Union female d110mm Tr154x6 d110 PN10
Union male d10mm G0,625in d10 PN16
Union male d12mm G0,625in d12 PN16
Union male d16mm G0,75in d16 PN16
Union male d20mm G1in d20 PN16
Union male d25mm G1,25in d25 PN16
Union male d32mm G1,5in d32 PN16
Union male d40mm G2in d40 PN16
Union male d50mm G2,25in d50 PN16
Union male d63mm G2,75in d63 PN16
Union male d75mm Tr108x5 d75 PN10
Union male d90mm Tr128x5 d90 PN10
Union male d110mm Tr154x6 d110 PN10
(c) SHK Engineering and Consulting GmbH&Co. KG - www.shk.com 21 / 26 3sDatasheet - Plastic met - PVC-U^ver.1.1 - 2015-09-23.xlsx
3sDatasheet - Plastic met - PVC-U
Metric Flowmeter with socket ends for solvent cement joints
lenght dimension unit = mmD
escr
pti
on
No
min
al s
ize
3sk
en
g si
ze
Cla
ss
FlowmeterFlowmeter short d16mm d16 PN10
Flowmeter short d20mm d20 PN10
Flowmeter short d25mm d25 PN10
Flowmeter short d32mm d32 PN10
Flowmeter d32mm d32 PN10
Flowmeter d40mm d40 PN10
Flowmeter d50mm d50 PN10
Flowmeter d63mm d63 PN10
Flowmeter d75mm d75 PN10
(c) SHK Engineering and Consulting GmbH&Co. KG - www.shk.com 22 / 26 3sDatasheet - Plastic met - PVC-U^ver.1.1 - 2015-09-23.xlsx
3sDatasheet - Plastic met - PVC-U
Metric Pressure Regulating Valve with socket ends for solvent cement joints
lenght dimension unit = mm
Des
crp
tio
n
No
min
al s
ize
3sk
en
g si
ze 0
3sk
en
g si
ze 1
Cla
ss
Pressure Regulating ValvePressure Regulating Valve Union d16mm d16 d16 PN16
Pressure Regulating Valve Union d20mm d20 d20 PN16
Pressure Regulating Valve Union d25mm d25 d25 PN16
Pressure Regulating Valve Union d32mm d32 d32 PN16
Pressure Regulating Valve Union d40mm d40 d40 PN16
Pressure Regulating Valve Union d50mm d50 d50 PN16
Pressure Regulating Valve Union d63mm d63 d63 PN16
Pressure Regulating Valve Stub d16mm d16 d16 PN16
Pressure Regulating Valve Stub d20mm d20 d20 PN16
Pressure Regulating Valve Stub d25mm d25 d25 PN16
Pressure Regulating Valve Stub d32mm d32 d32 PN16
Pressure Regulating Valve Stub d40mm d40 d40 PN16
Pressure Regulating Valve Stub d50mm d50 d50 PN16
Pressure Regulating Valve Stub d63mm d63 d63 PN16
(c) SHK Engineering and Consulting GmbH&Co. KG - www.shk.com 23 / 26 3sDatasheet - Plastic met - PVC-U^ver.1.1 - 2015-09-23.xlsx
3sDatasheet - Plastic met - PVC-U
Metric Ball Valve with socket ends for solvent cement joints
lenght dimension unit = mmD
escr
pti
on
No
min
al s
ize
3sk
en
g si
ze 0
3sk
en
g si
ze 1
Cla
ss
Ball ValveBall Valve d16mm d16 d16 PN16
Ball Valve d20mm d20 d20 PN16
Ball Valve d25mm d25 d25 PN16
Ball Valve d32mm d32 d32 PN16
Ball Valve d40mm d40 d40 PN16
Ball Valve d50mm d50 d50 PN16
Ball Valve d63mm d63 d63 PN16
Ball Valve d75mm d75 d75 PN16
Ball Valve d90mm d90 d90 PN16
Ball Valve d110mm d110 d110 PN16
(c) SHK Engineering and Consulting GmbH&Co. KG - www.shk.com 24 / 26 3sDatasheet - Plastic met - PVC-U^ver.1.1 - 2015-09-23.xlsx
3sDatasheet - Plastic met - PVC-U
Metric Diaphragm Valve with socket ends for solvent cement joints
lenght dimension unit = mmD
escr
pti
on
No
min
al s
ize
3sk
en
g si
ze 0
3sk
en
g si
ze 1
Cla
ss
Diaphragm ValveDiaphragm Valve Union d20mm d20 d20 PN16
Diaphragm Valve Union d25mm d25 d25 PN16
Diaphragm Valve Union d32mm d32 d32 PN16
Diaphragm Valve Union d40mm d40 d40 PN16
Diaphragm Valve Union d50mm d50 d50 PN16
Diaphragm Valve Union d63mm d63 d63 PN16
Diaphragm Valve Stub d20mm d20 d20 PN16
Diaphragm Valve Stub d25mm d25 d25 PN16
Diaphragm Valve Stub d32mm d32 d32 PN16
Diaphragm Valve Stub d40mm d40 d40 PN16
Diaphragm Valve Stub d50mm d50 d50 PN16
Diaphragm Valve Stub d63mm d63 d63 PN16
Diaphragm Valve Flange DN15mm DN15 DN15 PN16
Diaphragm Valve Flange DN20mm DN20 DN20 PN16
Diaphragm Valve Flange DN25mm DN25 DN25 PN16
Diaphragm Valve Flange DN32mm DN32 DN32 PN16
Diaphragm Valve Flange DN40mm DN40 DN40 PN16
Diaphragm Valve Flange DN50mm DN50 DN50 PN16
(c) SHK Engineering and Consulting GmbH&Co. KG - www.shk.com 25 / 26 3sDatasheet - Plastic met - PVC-U^ver.1.1 - 2015-09-23.xlsx
3sDatasheet - Plastic met - PVC-U
Metric Butterfly Valve with socket ends for solvent cement joints
lenght dimension unit = mmD
escr
pti
on
No
min
al s
ize
3sk
en
g si
ze 0
Cla
ss
Butterfly ValveButterfly Valve (Handle) DN40 DN40 PN10
Butterfly Valve (Handle) DN50 DN50 PN10
Butterfly Valve (Handle) DN65 DN65 PN10
Butterfly Valve (Handle) DN80 DN80 PN10
Butterfly Valve (Handle) DN100 DN100 PN10
Butterfly Valve (Handle) DN125 DN125 PN10
Butterfly Valve (Handle) DN150 DN150 PN10
Butterfly Valve (Handle) DN200 DN200 PN10
Butterfly Valve (Gear) DN40 DN40 PN10
Butterfly Valve (Gear) DN50 DN50 PN10
Butterfly Valve (Gear) DN65 DN65 PN10
Butterfly Valve (Gear) DN80 DN80 PN10
Butterfly Valve (Gear) DN100 DN100 PN10
Butterfly Valve (Gear) DN125 DN125 PN10
Butterfly Valve (Gear) DN150 DN150 PN10
Butterfly Valve (Gear) DN200 DN200 PN10
(c) SHK Engineering and Consulting GmbH&Co. KG - www.shk.com 26 / 26 3sDatasheet - Plastic met - PVC-U^ver.1.1 - 2015-09-23.xlsx