Product Overview
CCR Clear Casting Epoxy is a clear, UV-stabilized epoxy system designed specifically for casting, potting, and embedding applications. Low colour and low viscosity allow for bubble-free, crystal-clear castings ideal for art and hobby applications. This SUPER
SAP® formulation features two hardener speeds; slow (CCS) for high build casting epoxy applications and fast (CCF) for quick, small project fast casting epoxy applications such as resin jewellery and more.
Available in FAST and SLOW cure speeds.
Fast Cure: 90 min pot life, 24 HR tack free time Slow Cure: 360 min pot life, 72 HR tack free time
Two-part epoxy kits comprised of Super Sap CCR Resin and CCF (FAST) or CCS (SLOW) Hardener.
Note: CCF FAST hardener should ONLY be used for low-volume (less than 1 pint) casting applications with thicknesses below 1″. Using CCF FAST hardener for larger volumes or thicknesses can result in exothermic cures that will damage the epoxy.
Best Uses
Encapsulation or Embedding Bar top epoxy Resin Jewellery Resin Castings Moulding Resin Art, Hobby, Craft Resin High Build Coatings Mass Castings (SLOW only)
CONTACT US: Email: [email protected] Cell: +27 71 642 7188 Phone: +27 12 997 2148 Like us on