+ All Categories
Home > Retail > 4 The Upside of Packaging Sustainability White Paper

4 The Upside of Packaging Sustainability White Paper

Date post: 14-Apr-2017
Category:
Upload: diggum3
View: 183 times
Download: 2 times
Share this document with a friend
5
THE UPSIDE OF PACKAGING SUSTAINABILITY SEPTEMBER 2011
Transcript

THE UPSIDE OF PACKAGING SUSTAINABILITY

SEPTEMBER 2011

Packaging Sustainability is maturing. The green movement of recent years has taken root with consumers, product manufacturers, and distribution experts to drive substantial changes in raw material sourcing, manufacturing, packaging and distribution practices. Yet, it remains a multi-dimensional, complex science. We’re seeing advancements in packaging reduction, material substitutions, recyclability and use of recycled content, renewable energy, transportation, truth in advertising, ethical sourcing, and social responsibility. These improvements are important, but generally carry a price tag. The most attractive solutions are those that improve sustainability but actually result in economic savings – savings that ripple through the system to increase profitability.

Product manufacturers are supporting the cause through Life Cycle Assessments. Consumer electronics products are becoming smaller and lighter in a process known as “dematerialization” where products require fewer resources to manufacture, less packaging, less energy to transport, and are easier to recycle or repurpose at the end of life. 1 In the case of one product, styrofoam and traditional packaging were replaced with a protective bag made of recycled materials, packing three-to-a-case, which reduced total product packaging by 97 percent.2 Concentrated liquid soaps, detergents and cleaning products are in; phosphates are out. More and more containers are now refillable and reusable.

When considering raw materials for packaging, poly coatings, waxes and laminates often complicate package recyclability. These are being replaced with aqueous coatings which are recyclable and/or compostable. Bio based materials such as PLA (poly-lactic acid) are gaining momentum, however, it’s important to note that while some bio-based packaging materials may be biodegradable, not all biodegradable materials are bio-based.3

As fuel costs have skyrocketed once again, retailers are reminded of the need for better efficiencies in shipping and distribution. Unfortunately, most shipping containers cube out before they weigh out, that is, they’re carrying a lot of unnecessary air. Existing products can sometimes be reconfigured to stack more efficiently, adding additional rows and filling out the pallet while also improving stabilization.

Load planning software from CAPE Systems4 and TOPS Engineering5 are effective tools for palletizing optimization. In this process, however, primary package sizes are often determined first, then cases, pallets and container loads are configured from there. The result is potential inefficiency in the final load. Reverse engineering starts with the dimensions of a truck or shipping container and works backward through the process so that the primary package is fully optimized by weight and volume. Think of it as a harmonization of primary, secondary,

THE UPSIDE OF PACKAGING SUSTAINABILITY

PACKAGING

2100 GATEWAY BLVD. HEBRON, KY 41048 WWW.ZUMBIEL.COMPACKAGING

Packaging Sustainability is maturing. The green movement of recent years has taken root with consumers, product manufacturers, and distribution experts to drive substantial changes in raw material sourcing, manufacturing, packaging and distribution practices. Yet, it remains a multi-dimensional, complex science.

and tertiary packaging where each component shares the load as part of an engineered system. Selling Unit Cube Utilization is important at the store shelf, but Transport Unit Cube Utilization (cases, pallets and shipping containers) is equally critical but often unseen and unappreciated by consumers. Pallets are becoming stronger and are sometimes reusable. Reusable trays, totes, tier sheets, and even corrugated RSC’s extend the practical life of secondary packaging and dunnage. Repulpable paper strapping materials are supplanting plastic or metal and pallet loads are being secured with thin, low density films with as much as 250% stretch, providing full protection with a greatly reduced packaging footprint.6

A current trend supports the reduction, elimination, or repurposing of corrugated shipping cases. With Retail Ready Packaging (RRP), a new generation of ingenious cases double as point-of-purchase trays with beautiful graphics, thus allowing for fewer “touches” in handling. Pouches can be interleaved and split to create top and bottom display trays from a single case. Small items with high volume are key targets as the ergonomics of stocking shelves is also evolving.

Bag-in-box technologies aren’t just for wine anymore. Other liquids such as motor oil are finding a home in these squared-off structures which have far better cube utilization and produce 84% less waste than with rounded polyethylene alternatives.7

Protective cushioning materials such as Styrofoam are being replaced by air bags, bio-based materials such as water soluble starch, plant byproducts such as coconut husks,8 and recyclable expanded paper structures.9 Bags made of polyvinyl chloride (PVC) are being eliminated altogether in favor of recyclable paper bands and strapping.

Back at the package converting plant, other exciting changes are also taking place. Hybrid processes can combine two or more printing processes such as flexo, offset, digital and rotary screen printing with die cutting, gluing, and package assembly. Advancements in prepress, prototyping, plates and inks are all being made with sustainability in mind.

IN OTHER NEWS. . .

Walmart Stores, Inc. continues to provide strong leadership in Packaging Sustainability. The Sixth Annual Packaging Sustainability Expo was completed in April, 2011 with approximately 2000 attendees and exhibitors gathering in Arkansas to exchange success stories and capture the latest information from industry experts. The Walmart Packaging Scorecard is progressing as the US-EPA is in the process of providing updated life cycle inventory data for virgin and recycled plastics, PLA, aluminum, steel, glass, paper and paperboard. Refinements to the scorecard are also coming in the areas of cube utilization, sustainable material metrics, and improvements to the reporting functions for total material usage, GHG emissions, CO2 equivalents, and calculations per the Consumer Meaningful Unit of Measure (CMUM).

Virtually every raw material supplier, product manufacturer, packaging and supply chain organization has joined the Green Movement by word if not in deed as evidenced by web sites and annual reports. Consumers are highly influenced to make purchasing decisions based on product labeling, therefore, products that claim to be eco-friendly are often favored. Environmental marketing claims are required to meet state and federal requirements, yet violations abound. Deceptive advertising and unsubstantiated claims have been seriously problematic. The Federal Trade Commission is responsible for regulating these claims and to that end, has issued a revised set of “Green Guides” for product labeling.10 NGO’s such as Greener Package provide third-party reviews to assist with this compliance.

How do individuals and organizations sort through the confusion? The Global Packaging Project is a program of the Consumer Goods Forum that seeks to simplify the complicated details of packaging sustainability.11 Led by Unilever and Tesco, a large representation of manufacturers, retailers, packaging companies, associations, academic and technical organizations are working to develop a common, international language, metrics and protocol to clarify such terms as “sustainable sourcing”, “compostable”, “biodegradable”, “renewable”, etc. The

2100 GATEWAY BLVD. HEBRON, KY 41048 WWW.ZUMBIEL.COMPACKAGING

• Electronics• Food, Beverage and Agriculture• Home & Personal Care• Paper• Packaging

study includes environmental attributes, life cycle assessment, economic and social indicators. The tools will be user-friendly, employing more accurate data than is often currently available. A second version of the protocol is nearing release.

On a broader scale, the Sustainability Consortium (TSC) is an independent organization of global participants that have recently formed to promote sustainability with products, consumption, and supply chains. It reaches beyond packaging to develop strategic partnerships, measurement, reporting standards, and conduct scientific research. TSC market sectors include:

Formed in 2009, the organization currently holds 77 member companies and academic partners.12

So show me the money! There are treasures in sustainable packaging through changes in raw material, quality and productivity improvements, and increased partnerships with a groundswell of CPG companies and consumers who are driving the train.

We live in exciting times. The dynamic science of sustainability marches on. Fortunately, sustainable packaging doesn’t preclude profitability. As packaging professionals, it’s essential to be actively engaged as we sort through the clutter and search for meaningful improvements that can also add to the bottom line.

WRITTEN BY: DAN MALENKEDan Malenke is an accomplished training manager with extensive coast-to-coast and international experience in developing and directing technical seminars for the printing and packaging industries. His career includes 20+ years with a Fortune 500 company, 9 years university teaching experience, and accumulated work in production.

ABOUT ZUMBIEL PACKAGINGEstablished in 1843, Zumbiel Packaging has been providing innovative paperboards packaging solutions to brands in the beverage, automotive, and consumer markets. The privately owned and operated company, located in Hebron, Kentucky, is one of the largest paperboard packaging companies in the United States. For more information on Zumbiel Packaging please visit www.Zumbiel.com.

2100 GATEWAY BLVD. HEBRON, KY 41048 WWW.ZUMBIEL.COMPACKAGING

REFERENCES1 Consumer Electronics Association, “Sustainability Report” 2010, http://www.ce.org/GovernmentAffairs/2267.asp

2 Walmart Stores, “Home Entertainment Design Challenge”, http://walmartstores.com/Sustainability/8600.aspx?p=7983

3 Weber, C. J., Haugaard, V., Festersen, R., & Bertelsen, G. (2002). Production and applications of biobased packaging materials for the food industry. Food Additives and Contaminants, 19, 172–177.

4 Cape Systems, “Pallet Lite, Cape Pack, and Truckfill”, http://www.capesystems.co.uk/

5 Tops Engineering, “MaxLoad® Pro”, http://www.topseng.com/MaxLoadFeatures.html

6 Collins, Mark,“Stretch Your Imagination”, Material Handling and Logistics, March 1, 2010http://mhlnews.com/packaging/stretch-imagination-6862/

7 Greener Package, “Bag-in-box for Motor Oil”http://www.greenerpackage.com/source_reduction/bag--box_motor_oil

8 Greener Design, “Coconut Husks Find New Life as Packaging” http://www.greenbiz.com/news/2010/09/20/coconut-husks-find-new-life-packaging

9 ExpandOS™, “Alternative Product Protection System” http://www.expandos.com/

10 Federal Trade Commission, Green Guides, “ Proposed Revisions to Claims Currently Addressed by Guides”, 2010, http://www.ftc.gov/bcp/edu/microsites/energy/documents/Green-Guides-Summary-of-Proposal.pdf

11 Consumer Goods Forum, “A Global Language for Packaging and Sustainability”http://www.vics.org/docs/KSurvey/press_releases/pdf/GPP_FinalReport_170610.pdf

12 The Sustainability Consortium, “Science and Tools that Improve Product Sustainability”http://www.sustainabilityconsortium.org/

2100 GATEWAY BLVD. HEBRON, KY 41048 WWW.ZUMBIEL.COMPACKAGING


Recommended