4000 & 6000
Home LiftGuide
Stylish Liftsexclusively designed
for your Home
"Gartecs team were friendly
and knowledgeable, kept me
informed and even tidied
everything up at the end!"
"I would like to say that
all at Gartec have been very
helpful. The lift is my lifeline
and enables me to live here"
Barbara, Stourbridge
01296 397100
Platform lifts are a very simple and safe way to travelbetween floors. All Gartec Home lifts use patented screw
& nut technology to drive the platform using a reliable,quiet and efficient motor. There is no requirement for a
seperate machine room, hydraulic oil or pump box
Two guide rails run from top to bottom on the back ofthe lift. The platform is connected to the guide rails
ensuring a smooth ride is provided.
How It
Works
3 www.gartechome.com
The platform that you stand on and thecontrol wall are the only parts that move asyou travel up and down. The walls are staticand you see these move past as you travel.
To start moving, you hold down the buttonon the control panel. When you let go, thelift stops moving, meaning you can changedirection mid-travel.
Around the perimeter of the platform is asafety edge which stops the lift from movingwhen pressed down due to an obstruction.
Our patented screw and nut technology drives thelift up and down. A threaded bar runs up the backof the platform to the top of the shaft, and a nut,which is attached to the platform, is driven up anddown by a quiet and reliable motor.
Automatic lubrication of the screw is included asstandard. It is connected to a sensor and timer soan indicator advises when levels are running low.
Only a40mm pit
A secondary motor is fitted to the lift and connectedto a battery source. In the event of a power failurethe lift switches to battery operation and allows theuser to return to the floor below and exit the liftwithout any external assistance.
No OverunEmergency Battery Lowering
Platform & Travel
Screw & Nut Technology
4
Design
Options
D O O R O P T I O N S
A glass & steel door withconcealed door closer andaluminium trim to glass areas
Aluminium Door Handle
G L A S S O P T I O N S
L I G H T I N G O P T I O N S
Standard
Standard
GL Door Double Hinged Glass Doors Fire Door (60 Minutes) Half Height Gate (Top Floor)
Doors are centrally opening leaveswith concealed door openers andaluminium trim to glass areas.
Includes concealed doorcloser and aluminium trimto glass areas.
Available on Aritco 6000 only.
Includes concealed doorcloser and aluminium trimsto glass areas.
Available on Aritco 6000 only.Maximum travel height 3m.
H A N D L E O P T I O N S
Brushed Stainless SteelDoor Handle
Open ended rod style handle withbrushed steel finish. Fingerprintresistant finish.
Open ended rod style handlewith fingerprint resistant finish.
JT10
JT16
JT23
JT5
Glazing Tints for Doors and Shaft
Clear glass (JT10) is standard on both models.
You can have Clear Glass (JT10), Tinted Glass (JT16),Frosted Glass (JT23) or Dark Tinted Glass (JT5).
This can be changed on the doors and shaft. Shaft glasspanels are available in 3 heights, or custom size up to 2500mm.
6000
Standard
Optional Automatic Door
Press the landing call stationbutton and the lift doors open.
The Aritco 6000 come as standard with LED shaft lighting.
The Aritco 4000 has LED lighting built into the console wall.
L O C K I N G O P T I O N S
Both the Aritco 4000 and 6000 can have a key switchinstead of call button to restrict access to your lift.
You will need the key to call and use the lift, and thedoor locks again 10 seconds after it has closed.
Personalise the outside your lift with a range ofoptions and finishes to blend in or stand out fromyour home design.
4000
Standard
01296 397100
Platform
Options
5 www.gartechome.com
P L A T F O R M O P T I O N S
4000
Standard
Full Height Console
As standard on the Aritco 4000 only.
Full height panel houses controls,mirror, handrail and integral lightingabove. Includes safety stop edge.
Total height: 2200mm
Half Height Console
6000
Standard
As standard on the Aritco 6000 only.
Half height panel houses controlsand handrail, with safety stop edge.
Total height: 1100mm
Full Height Console with Mirror
Available on the Aritco 6000 only.
Full height panel houses controls,mirror, integral lighting, handrailand safety stop edge.
Total height: 2000mm
H A N D R A I L O P T I O N S
Brushed Stainless SteelPlatform Handrail
Open ended rod stylehandrail with brushedsteel fingerprint resistantfinish.
Aluminium PlatformHandrail
Open ended rod stylehandrail with fingerprint resistant finish.
Standard
C O M M U N I C A T I O N O P T I O N S
E N T R Y O P T I O N S
Personalise the inside your lift with a range ofoptions and finishes to blend in or stand out from
your home design.
D E S T I N A T I O N O P T I O N S
Choose from either a 50mm pit, or oneof these thresholds.
Oak or aluminiumthreshold step
Galvanised steel entry ramppainted to match colourchoice for door frames
Corrugated aluminiumentry ramp
Standard
Bespoke PlatformFloor Lettering
Platform FloorIndicator
Landing PositionIndicator
Bespoke lettering canbe displayed above thebuttons on the platform.
Max. 10 letters per stop.
A voice and LED displaynotifying the user of the landing reached and thecurrent position of the liftwhilst travelling.
Positioned on the controlpanel on the platform.
Illuminated LED displayshowing the currentposition of the lift fromoutside.
Positioned on the exteriorof the lift.
Standard
Alarm Button
Fitted on thelift as standard,when pressed abuzzer sounds.
External Alarm
Mounted inside oroutside the lift, whenthe alarm button ispressed this will givea loud signal toattract attention.
Autodialler
Integrated in the controlpanel, the autodiallerrings a set of pre-enterednumbers when the alarmbutton is pressed.
When unanswered, thenext number is called.
Telephone
Attached to theplatform, this can beused like a normalphone. Intended foremergency situations.
Standard
RAL 9006 White Aluminium RAL 7012 Basalt GreyRAL 9007 Grey Aluminium RAL 7045 Telegrey 1
6
Colour
Your
Lift
F L O O R I N G O P T I O N S
The floor of the lift adds an extra touch to the design. You havea number of quality handpicked floors to choose from to matchwith your home design.
Your own personal choice is also possible if you wish to match theflooring with your own home flooring.
We know that every home looks different,and understand you want to design your liftso it matches all of your home.
The walls, frames and doors can each be paintedin different colours to fit your personal style.
As standard, the whole lift is painted in Traffic White (RAL 9016).The whole lift can be painted in an optional colour from below, ascan the door frames and any covered walls.
W A L L & D O O R C O L O U R S
RAL 1015 Light IvoryRAL 9010 Pure WhiteRAL 9016 Traffic White
RAL 8017 Chocolate BrownRAL 9005 Jet BlackRAL 7016 Anthracite Grey
RAL 7047 Telegrey 4
Classic Walnut Vinyl Oiled Oak Vinyl European Oak Vinyl
Checker Grey Rubber Checker Black Rubber Checker Red Rubber
Standard
Standard
Standard
Standard
Checker Stud Black Rubber Checker Stud Grey RubberMineral Grey Vinyl
Standard
01296 397100
Technical
Details
7 www.gartechome.com
T E C H N I C A L I N F O R M A T I O N
Type of Lift Aritco Lift intended for installationin private homes
TechnicalCompliance
European Machine Directive 2006/42/ECEuropean Standard EN81-41
Drive System Screw & Nut System
InstallationEnvironment
Internal
InstallationRecess Installation Pit: 50mm below floor
Install Direct on Floor: 50mm ramp
Rated Speed Max 0.15m/s
M E A S U R E M E N T S
Travel Height 250 - 13,000 mm
Top HeightAritco 6000: 2240mmAritco 4000: 2300mm
No. of Floors 2 to 6 floors
Carrier Sizes& Rated Load
805 x 580 mm
805 x 880 mm
805 x 1080 mm
250kg
250kg
250kg
Call ButtonControls
CarrierControl Panel
One touch operation
Hold to Run (continuous pressure)
PowerRequirement
1 Phase, 230V, 20A as standard
3 phase, 400V, 20A option on 6000*
For shaft, floor opening and door sizesplease see plan views page
Aritco 4000
900 x 1040 mm
900 x 1280 mm
900 x 1480 mm
1000 x 1280 mm
1000 x 1480 mm
1100 x 1480 mm
410kg
410kg
410kg
410kg
410kg / 500kg*
410kg / 500kg*
Aritco 6000
The technical specifications for the Aritco 4000 and
6000 are listed below. We take around 2-3 days to
install the lift using a modular system which means
no building works or scaffolding on site. If you
need more information, please just get in touch.
Our lifts come as standard with safety features including a safety
edge around the platform, emergency stop button, lights, battery
backup and self closing door mechanisms.
Lift Colour
Lift Walls
Doors
Carrier & Control Panel
The shaft panels anddoors come as standard
in RAL 9016 (Traffic White)
Choose between glassor solid panels
Doors are fitted to the liftwall at each floor, on any
of 3 sides.
The carrier consists of theL-shaped platform that movesup and down when you travel.
The lift is controlled by pressingand holding the floor buttons. Aritco 6000
Aritco 4000
*3 phase required for 500kg option
8
Plan
Views
The 4000 & 6000 platform sizes are shown below
with a range of door configurations. If you need a
specific drawing, just let us know and we'll send
one free of charge as part of our design sevice.
A R I T C O 4 0 0 0 P L A N S
A R I T C O 6 0 0 0 P L A N S
Hole through floor: 870 x 910mmPlatform: 805 x 580mmLoad: 250kg
805 x 580 805 x 880
Hole through floor: 1170 x 910mmPlatform: 805 x 880mmLoad: 250kg
Floor opening: 910
20
0
Flo
or o
pe
nin
g: 8
70
58
0
Pla
tform
: 58
0
Shaft: 880
805
800
Sh
aft: 8
40
805 x 1080
Floor opening: 910
Shaft: 880
Flo
or o
pe
nin
g: 1
17
0
Sh
aft: 1
14
0
805
88
0
Pla
tform
: 88
02
00
Floor opening: 910 (960)
Shaft: 930
Flo
or o
pe
nin
g: 1
30
5 (1
37
0)
Sh
aft: 1
27
5 (1
34
0)
90
0
900
20
0
10
80
805
21
0
Hole through floor:- Doors A/C side: 1370 x 960mm- Door B side: 1305 x 910mmPlatform: 805 x 1080mmLoad: 250kg
900 x 1040
Hole through floor:- Doors B side: 1330 x 1190mm- Door A/C side: 1305 x 1190mmPlatform: 900 x 1040mmLoad: 250kg
Floor opening: 1190
Shaft: 1160
1040
90
0
800
13
0
800
13
0
130
215
130
Flo
or o
pe
nin
g: 1
30
5 (1
33
0)
Sh
aft: 1
27
5 (1
30
0)
Do
or w
idth
: 80
0
Floor opening: 1430
Shaft: 1400 Flo
or o
pe
nin
g: 1
30
5 (1
33
0)
Sh
aft: 1
27
5 (1
30
0)
Do
or w
idth
: 80
0
215
130
130
1280
90
0
800
20
0
900
20
0
Hole through floor:- Doors B side: 1330 x 1430mm- Door A/C side: 1305 x 1430mmPlatform: 900 x 1280mmLoad: 410kg
900 x 1280 900 x 1480
Flo
or o
pe
nin
g: 1
30
5 (1
33
0)
Sh
aft: 1
27
5 (1
30
0)
Do
or w
idth
: 80
0
Floor opening: 1630Shaft: 1600
130
215
130
300900300
800
148090
0
Hole through floor:- Doors B side: 1330 x 1630mm- Door A/C side: 1305 x 1630mmPlatform: 900 x 1480mmLoad: 410kg
1000 X 1280 1000 X 1480 1100 X 1480
Floor opening: 1430Shaft: 1400
215
130
130
20
0
20
0
900
900
1280
10
00
Do
or w
idth
: 90
0S
ha
ft: 13
75
(14
00
)F
loo
r op
en
ing
: 14
05
(14
30
)
Hole through floor:- Doors B side: 1430 x 1430mm- Door A/C side: 1405 x 1430mmPlatform: 1000 x 1280mmLoad: 410kg
Hole through floor:- Doors B side: 1430 x 1630mm- Door A/C side: 1405 x 1630mmPlatform: 1000 x 1480mmLoad: 410kg
Flo
or o
pe
nin
g: 1
40
5 (1
43
0)
Sh
aft: 1
37
5 (1
40
0)
Do
or w
idth
: 90
0
215
130
130
900 300300
900
1480
10
00
Floor opening: 1630Shaft: 1600
Floor opening: 1630Shaft: 1600
Flo
or o
pe
nin
g: 1
50
5 (1
53
0)
Sh
aft: 1
47
5 (1
50
0)
Do
or w
idth
: 90
0
215
180
180
300 300900
900
1480
11
00
Hole through floor:- Doors B side: 1530 x 1630mm- Door A/C side: 1505 x 1630mmPlatform: 1100 x 1480mmLoad: 410kg
01296 397100
800
800
Gartec are the UK's leadings supplier and installer of plaform lifts,
utilising over 20 years' experience to bring you the very best.
The Gartec Home division has been created specifically to give you
the extra care and attention required. Our lifts are tailored to home
life to give you the most from your lift, and created with you in mind.
We are wholly owned by our manufacturer, Aritco Group, who are
based in Kungsangen, Sweden. All the research and development
is completed in Sweden, bringing both form and function to the
highest quality, from design to installation in your home.
+44 (0)1296 397100
www.gartechome.com