+ All Categories
Home > Documents > 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web...

40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web...

Date post: 13-Mar-2018
Category:
Upload: phungkien
View: 221 times
Download: 1 times
Share this document with a friend
112
SET Portfolio Research Publications 2004 SET Portfolio Office 2 Aerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical Engineering 27 Computer Science & Information Technology 32 Electrical & Computer Engineering 43 Health Sciences 59 Mathematical & Geospatial Sciences 64 Medical Sciences 69 1
Transcript
Page 1: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

SET Portfolio

Research Publications 2004

SET Portfolio Office 2

Aerospace, Mechanical & Manufacturing Engineering 3

Applied Sciences 15

Civil & Chemical Engineering 27

Computer Science & Information Technology 32

Electrical & Computer Engineering 43

Health Sciences 59

Mathematical & Geospatial Sciences 64

Medical Sciences 69

1

Page 2: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

SET Portfolio Office

Book Chapters Long, S., 2004, ‘Building an institution for experiential learning’, in Experiential Learning in Organizations, Karnac, London, pp. 101-136, ISBN 1-85575-979-9.

Ryan, Y., Fraser, K., Bryant, L. and Radloff, A., 2004, ‘The multiple context of higher education staff and academic development’, in Exploring Academic Development in Higher Education, Jill Rogers Associates, Cambridge, pp. 41-58, ISBN 0-9547111-22.

Journal Articles Behncke, L. B., 2004, ‘Mental skills training for sports: A brief review’, in Athletic Insight: Online Journal of Sport Psychology, Athletic Insight, New York, vol. 6, pp. 1-24, 1, ISSN 1536-0431.

Gray, K., Piva, T. and Nicolettou, A., 2004, ‘Quality, viability and relevance: A strategic framework for evaluating the effectiveness of mixed-mode teaching and learning in an undergraduate biotechnology and biomedical science degree’, in Education Media International, Taylor and Francis, London, vol. 41, pp. 219-229, ISSN 0952-3987.

Harvey, E., Fletcher, D., Shortis, M. R. and Kendrick, G., 2004, ‘A comparison of underwater visual distance estimates made by scuba divers and a stereo-video system: Implications for underwater visual census of reef fish abundance’, in Marine and Freshwater Research, CSIRO Publishing, Melbourne, vol. 55, pp. 573-580, ISSN 1323-1650.

Osborne, R. H., Elsworth, G., Sprangers, M. A., Oort, F. J. and Hopper, J. L., 2004, ‘The value of the hospital anxiety and depression scale (HADS) for comparing women with early onset breast cancer with population-based reference women’, in Quality of Life Research, Kluwer, Netherlands, vol. 13, pp. 191-206, ISSN 0962-9343.

Osborne, R. H., Sali, A., Aaronson, N. K., Elsworth, G., Mdzewski, B. and Sinclair, A., 2004, ‘Immune function and adjustment style: Do they predict survival in breast cancer?’, in Psycho-Oncology, John Wiley, UK, vol. 13, pp. 199-210, ISSN 1057-9249.

Shortis, M. R., Leahy, F. J., Ogleby, C. L., Kealy, A. N. and Ellis, F. G., 2004, ‘Web-based learning of spatial design and analysis concepts using simulations and visual feedback’, in Survey Review, Commonwealth Association of Surveying and Land Economy, Bristol, vol. 37, pp. 344-359, ISSN 0039-6265.

Conference Publications Barnes, D., Pannan, L. and Arora, N., 2004, ‘Beyond Word: simple website creation via a support tool for web based communication, publishing and teaching’, in Proceedings of the Tenth Australian World Wide Web Conference, A. Treloar and A. Ellis (ed.), Southern Cross University, Lismore (AusWeb04: Tenth Australian World Wide Web Conference).

Chang, R., Wahr, F., De Pew, D., Gray, K., Jansz-Senn, A. and Radloff, A., 2004, ‘Knowledge, wisdom and a holistic approach: A case study of change-management in academic development’, in Proceedings of the 2004 Annual International Conference of the Higher Education Research and Development Society of Australasia, F. Sheeny and B. Stauble (ed.), HERDSA, Milperra, NSW (Transforming Knowledge into Widsom: Holistic approaches to Teaching and Learning).

2

Page 3: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Gray, K., 2004, ‘A strategic framework for the evaluation of teaching and learning with technology’, in Proceedings of International Conference on Computers in Education 2004, E. McKay (ed.), Common Ground, Melbourne (International Conference on Computers in Education).

May, B. and Pannan, L., 2004, ‘Online discussion drives student-directed laboratory classes’, in Proceedings of the International Conference on Computers in Education 2004, E. McKay (ed.), Common Ground Publishing, Melbourne (International Conference on Computers in Education).

Pannan, L., van der Craats, C., Zuluaga, C. and Barnes, D., 2004, ‘Extending the academic comfort zone: Smooth transition from content rich linear courseware to problem based learning online’, in Beyond the Comfort Zone: Proceedings of the 21st Annual Conference of the Australasian Society for Computers in Learning in Tertiary Education, R. Atkinson et al. (ed.), ASCILITE, Perth (ASCILITE 2004).

Pottler, K., Lupfert, E., Johnston, G. H. and Shortis, M. R., 2004, ‘Photogrammetry: A powerful tool for geometric analysis of solar concentrators and their components’, in Proceedings of SOLAR 2004 Conference, R. Campbell-Howe (ed.), American Solar Energy Society, Washington, DC (International Solar Energy Conference).

Aerospace, Mechanical and Manufacturing Engineering

Book Chapters Baker, A., Mouritz, A. P., Chester, R. and Bannister, M., 2004, ‘Properties of composite systems’, in Composite Materials for Aircraft Structures, AIAA, Reston, USA, pp. 239-288, ISBN 2004-01219.

Scott, M., Nguyen, M., Elder, D. J., Bayandor, J., Rajbhandari, S. and Thomson, R., 2004, ‘Structures: explicit finite element modelling of impact events on composite aerospace structures’, in Notes on Numerical Fluid Mechanics and Multidisciplinary Design. Volume 85. Coupling of Fluids, Structures and Waves in Aeronautics, Springer, Berlin, pp. 101-115, ISBN 3-540-40222-5.

Journal Articles Alam, F., Tang, H. and Tu, J., 2004, ‘The development of an integrated experimental and computational teaching and learning tool for thermal fluid science’, in World Transactions on Engineering and Technology Education, Monash University, Melbourne, vol. 3, pp. 249-252, ISSN 1446-2257.

Awaja, F., Daver, F. and Kosior, E. I., 2004, ‘Recycled poly(ethylene terephthalate) chain extension by a reactive extrusion process’, in Polymer Engineering and Science, John Wiley, USA, vol. 78, pp. 1579-1587, ISSN 0032-3888.

Awaja, F., Daver, F., Kosior, E. I. and Cser, F., 2004, ‘The effect of chain extension on the thermal behaviour and crystallinity of reactive extruded recycled PET’, in Journal of Thermal Analysis and Calorimetry, vol. 78, Kluwer Academic Publishers, Budapest, vol. 44, pp. 865-884,

3

Page 4: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

ISSN 1388-6150.

Banks, R., Mouritz, A. P., John, S. J., Coman, F. and Paton, R., 2004, ‘Development of a new structural prepreg: Characterisation of handling, drape and tack properties’, in Composite Structures, Elsevier, Oxford, vol. 66, pp. 169-174, ISSN 0263-8223.

Bayandor, J., Thomson, R. and Scott, M., 2004, ‘An investigation into an advanced composites finite element explicit biphase model - Part I: Elastic Parameters’, in Composite Materials, Sage Publications, London, vol. 38, pp. 2119-2132, ISSN 0021-9983.

Bayandor, J., Thomson, R. and Scott, M., 2004, ‘An investigation into an advanced composite finite element explicit biphase model: Part II Damage parameters’, in Composite Materials, Sage Publications, London, pp. 2133-2142, ISSN 0021-9983.

Dube, V., Akbarzadeh, A. and Andrews, J., 2004, ‘The effects of non-condensible gases on the performance of loop thermosyphon heat exchanges’, in Applied Thermal Engineering, vol. 24, Elsevier, Oxford, vol. 38, pp. 2439-2451, ISSN 1359-4311.

Gardiner, C. P., Mathys, Z. and Mouritz, A. P., 2004, ‘Post-fire structural properties of burnt GRP plates’, in Marine Structures, Elsevier, Oxford, vol. 17, pp. 53-73, ISSN 0951-8339.

Gibson, A. G., Wright, P., Wu, Y., Mouritz, A. P., Mathys, Z. and Gardiner, C. P., 2004, ‘The integrity of polymer composites during and after fire’, in Journal of Composite Materials, Sage Publications, Los Angeles, vol. 38, pp. 1283-1307, ISSN 0021-9983.

Healey, G. P., 2004, ‘Fostering technologies for sustainability: Learning from the case of wind power in Australia’, in Australian Journal of Emerging Technologies and Society, Swinburne University, Melbourne, vol. 2, pp. 1-17, 2, ISSN 1449-0706.

John, S. J., Reeves, D. W., Evans, R. J. and Bundy, B., 2004, ‘Smart systems used as an educational aid in mechanical engineering’, in World Transactions on Engineering and Technology Education, UNESCO International Centre for Engineering Education, Melbourne, vol. 3, pp. 67-70, ISSN 1446-2257.

Kojima, H., Iwasaki, M., Fujii, H. A., Blanksby, C. M. and Trivailo, P. M., 2004, ‘Nonlinear control of librational motion of tethered satellites in elliptic orbits’, in Journal of Guidance, Control and Dynamics, American Institute of Aeronautics and Astronautics, Reston, USA, vol. 27, pp. 229-239, ISSN 0731-5090.

Kong, H. X., Mouritz, A. P. and Paton, R., 2004, ‘Tensile extension properties and deformation mechanisms of multiaxial non-crimp fabrics’, in Composite Structures, Elsevier, Oxford, vol. 66, pp. 249-259, ISSN 0263-8223.

Kootsookos, A. and Burchill, P. J., 2004, ‘The effect of the degree of cure on the corrosion resistance of vinyl ester/glass fibre composites’, in Composites Part A, Elsevier, Oxford, vol. 35, pp. 501-508, ISSN 1359-835X.

Kootsookos, A. and Gates, G. D., 2004, ‘The effect of the reduction of carbon content on the toughness of high chromium white irons in the as-cast state’, in Journal of Materials Science, Kluwer Academic Publishers, Dordrecht, Netherlands, vol. 39, pp. 73-84, ISSN 0022-2461.

4

Page 5: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Kootsookos, A. and Mouritz, A. P., 2004, ‘Seawater durability of glass- and carbon-polymer composites’, in Composites Science and Technology, Elsevier, Oxford, vol. 64, pp. 1503-1511, ISSN 0266-3538.

Li, H. C., Herszberg, I., Mouritz, A. P. and Weis, M., 2004, ‘Damage detection in a fibre reinforced composite beam using random decrement signatures’, in Composite Structures, Elsevier, Oxford, vol. 66, pp. 159-167, ISSN 0263-8223.

Li, H. C., Herszberg, I., Mouritz, A. P., Davis, C. E. and Galea, S. C., 2004, ‘Sensitivity of embedded fibre optic Bragg grating sensors to disbonds in bonded composite ship joints’, in Composite Structures, Elsevier, Oxford, vol. 66, pp. 239-248, ISSN 0263-8223.

Morsi, Y. S., Tu, J., Yeoh, G. H. and Yang, W. W., 2004, ‘Principal characteristics of turbulent gas-particulate flow in the vicinity of single tube and tube bundle structure’, in Chemical Engineering Science, Elsevier, Oxford, vol. 59, pp. 3141-3157, ISSN 0009-2509.

Mouritz, A. P., 2004, ‘Fracture and tensile fatigue properties of stitched fibreglass composites’, in Journal of Materials: Design and Applications, Institution of Mechanical Engineers, London, vol. 218, pp. 87-93, ISSN 1464-4207.

Mouritz, A. P., Kootsookos, A. and Mathys, G., 2004, ‘Stability of polyester- and vinyl ester-based composites in seawater’, in Journal of Materials Science, Kluwer Academic Publishers, Dordrecht, vol. 39, pp. 6073-6077, ISSN 0022-2461.

Mouritz, A. P., Mathys, Z. and Gardiner, C. P., 2004, ‘Thermomechanical modelling the fire properties of fibre-polymer composites’, in Composites, Elsevier, Oxford, vol. 35B, pp. 467-474, 1359-8368.

Mulvany, N., Tu, J., Chen, L. and Anderson, B., 2004, ‘Assessment of two-equation turbulence modelling for high Reynolds number hydrofoil flows’, in International Journal for Numerical Methods in Fluids, John Wiley, UK, vol. 45, pp. 275-299, ISSN 1097-0363.

Ng, E. Y., Watkins, S. and Johnson, P., 2004, ‘New pressure-based methods for quantifying radiator airflow’, in Journal of Automobile Engineering, Institution of Mechanical Engineers, UK, vol. 218, pp. 361-372, ISSN 0954-4070.

Subic, A. J. and Maconachie, D., 2004, ‘Flexible learning technologies and distance education: A teaching and learning perspective’, in European Journal of Engineering Education, Taylor and Francis, Abingdon, UK, vol. 29, pp. 27-40, ISSN 0304-3797.

Tu, J., Yeoh, G. H., Morsi, Y. S. and Yang, W. W., 2004, ‘A study of particle rebounding characteristics of a gas-particle flow over a curved wall surface’, in Aerosol Science and Technology, Taylor and Francis, Oxford, vol. 38, pp. 739-755, ISSN 0278-6826.

Wang, L., 2004, ‘Discrete model predictive controller design using Laguerre functions’, in Journal of Process Control, Elsevier, United Kingdom, vol. 14, pp. 131-142, ISSN 0959-1524.

Williams, P. D., 2004, ‘Application of pseudospectral methods for receding horizon control’, in Journal of Guidance, Control and Dynamics, American Institute of Aeronautics and Astronautics, Reston, USA, vol. 27, pp. 310-314, ISSN 0731-5090.

5

Page 6: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Williams, P. D., 2004, ‘Jacobi pseudospectral method for solving optimal control problems’, in Journal of Guidance, Control and Dynamics, Americal Institute of Aeronautics and Astronautics, Reston, USA, vol. 27, pp. 293-297, ISSN 0731-5090.

Williams, P. D., 2004, ‘Optimal control of tethered planetary capture missions’, in Journal of Spacecraft and Rockets, American Institute of Aeronautics and Astronautics, Reston, USA, vol. 41, pp. 315-319, ISSN 0022-4650.

Williams, P. D. and Blanksby, C. M., 2004, ‘Prolonged payload rendezvouz using a tether activator mass’, in Journal of Spacecraft and Rockets, American Institute of Aeronautics and Astronautics, Reston, USA, vol. 41, pp. 889-893, ISSN 0220-4650.

Williams, P. D., Blanksby, C. M. and Trivailo, P. M., 2004, ‘Tethered planetary capture maneuvers’, in Journal of Spacecraft and Rockets, American Institute for Aeronautics and Astronautics, Reston, USA, vol. 41, pp. 603-613, ISSN 0022-4650.

Williams, P. D., Watanabe, T., Blanksby, C. M., Trivailo, P. M. and Fujii, H. A., 2004, ‘Libration control of flexible tethers using electromagnetic forces and movable attachments’, in Journal of Guidance, Control and Dynamics, American Institute of Aeronautics and Astronautics, Reston, USA, vol. 27, pp. 882-897, ISSN 0731-5090.

Xia, R. S. and Mahdavian, M. S., 2004, ‘Experimental studies of step drills and establishment of empirical equations for the drilling process’, in International Journal of Machine Tools and Manufacture, Elsevier, USA, vol. 45, pp. 235-240, ISSN 0890-6955.

Yeoh, G. H. and Tu, J., 2004, ‘A bubble mechanistic model for subcooled boiling flow predictions’, in Numerical Heat Transfer Part B, Taylor and Francis, London, vol. 45, pp. 1-19, ISSN 1040-7790.

Yeoh, G. H. and Tu, J., 2004, ‘Numerical investigation of static flow instability in a low-pressure subcooled boiling channel’, in Heat and Mass Transfer, Springer, Berlin, vol. 40, pp. 355-364, ISSN 0947-7411.

Yeoh, G. H. and Tu, J., 2004, ‘Population balance modelling for bubbly flows with heat and mass transfer’, in Chemical Engineering Science, Elsevier, Oxford, vol. 59, pp. 3125-3139, ISSN 0009-2509.

Yeoh, G. H., Tu, J. and Li, Y., 2004, ‘On void fraction distribution during two-phase boiling flow instability’, in International Journal of Heat and Mass Transfer, Elsevier, New York, vol. 47, pp. 413-417, ISSN 0017-9310.

Zhou, B. H. and Mahdavian, M. S., 2004, ‘Experimental and theoretical analyses of cutting nonmetallic materials by low power CO2-laser’, in Journal of Materials Processing Technology, Elsevier, Switzerland, vol. 146, pp. 188-192, ISSN 0924-0136.

Conference Publications Abanteriba, S. and Mueller, M., 2004, ‘Development and analysis of a fast temperature sensor for high velocity flows’, in Proceedings of 2004 ASME Heat Transfer/Fluids Engineering Conference, S. Gopalakrishnan (ed.), ASME, New York (2004 ASME Heat Transfer/Fluids Engineering Conference).

6

Page 7: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Alam, F., Subic, A. J. and Watkins, S., 2004, ‘Effects of spin on aerodynamic properties of tennis balls’, in The Engineering of Sports 5, M. Hubbard et al. (ed.), International Sports Engineering Association, Sheffield, UK (Fifth International Conference on Sports Engineering).

Alam, F., Watkins, S. and Subic, A. J., 2004, ‘Aerodynamic forces on rugby and Australian rules footballs’, in Summary Papers of the Fifth International Colloquium on Bluff Body Aerodynamics and Applications, K. Cooper (ed.), University of Ottawa, Ottawa (Fifth International Colloquium on Bluff Body Aerodynamics and Applications).

Alam, F., Watkins, S. and Subic, A. J., 2004, ‘The aerodynamic forces on a series of tennis balls’, in Proceedings of the 15th Australasian Fluid Mechanics Conference, M.Behnia (ed.), The University of Sydney, Sydney (15th Australasian Fluid Mechanics Conference).

Alam, F., Watkins, S. and Subic, A. J., 2004, ‘The effects of surface structures on aerodynamic properties of tennis balls’, in Proceedings of Second BSME-ASME International Conference on Thermal Engineering, M. Hossain (ed), Bangladesh Society of Mechanical Engineering, Dhaka, Bangladesh (Second BSME-ASME International Conference on Thermal Engineering).

Alam, F., Zimmer, G. I. and Watkins, S., 2004, ‘A study of hydrodynamic pressure in the A-pillar regions of idealised and production cars’, in Proceedings of Second BSME-ASME International Conference on Thermal Engineering, M. Hossain (ed.), Bangladesh Society of Mechanical Engineers, Dhaka, Bangladesh (Second BSME-ASME International Conference on Thermal Engineering)..Ang, D., Chen, L. and Tu, J., 2004, ‘Unsteady RANS simulation of high Reynolds number trailing edge flow’, in Proceedings of 15th Australasian Fluid Mechanics Conference, M. Behnia et al. (ed.), University of Sydney, Sydney (15th Australasian Fluid Mechanics Conference).

Atyeo, S. V., Sinha, A. K. and Young, K. R., 2004, ‘An intelligent system for the pre-mission analysis of helicopter emergency medical services operations’, in Proceedings of the 30th European Rotorcraft Forum, P. Rougier (ed.), Rotorcraft Forum Organising Committee, Marseilles (30th European Rotorcraft Forum).

Cao, J-L., John, S. J. and Molyneaux, T., 2004, ‘Finite element analysis modelling of piezoelectric shunting for passive vibration control’, in Proceedings of the International Conference on Computational Intelligence for Modelling, Control and Automation, M. Mohammadian (ed.), University of Canberra, Canberra, (International Conference on Computational Intelligence for Modelling, Control and Automation) (CIMCA 2004).

Cao, J-L., John, S. J. and Molyneaux, T., 2004, ‘Piezoelectric-based vibration control optimization using the impedance matching technique’, in Proceedings of 2nd Australasian Workshop of Structural Health Monitoring, S. C. Galea et al. (ed.), Monash University, Melbourne (Second Australasian Workshop on Structural Health Monitoring).

Carn, C. L. and Trivailo, P. M., 2004, ‘The inverse determination of aerodynamic loading from structural response data using neural networks’, in Proceedings of the Inverse Problems, Design and Optimization (IPDO) Symposium, G. Dulikravich et al. (ed.), Federal University of Rio de Janeiro (UFRJ), Rio de Janeiro, (Inverse Problems, Design and Optimization Symposium).

Chang, P., Mouritz, A. P. and Cox, B. N., 2004, ‘Tensile fatigue properties of Z-pinned

7

Page 8: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

carbon/epoxy composite’, in Proceedings of 49th Sampe 2004 Symposium and Exhibition, J. E. Greer and S. R. Rodgers (ed.), SAMPE, Covina, USA (SAMPE 2004 Symposium and Exhibition).

Chang, P., Mouritz, A. P. and Cox, B. N., 2004, ‘Tensile strength and fatigue properties of Z-pinned composite lap joints’, in Composite Technologies for 2020, L. Ye et al. (ed.), University of Sydney, Sydney (Fourth Asian-Australasian Conference on Composite Materials).

Charlesworth, S., Kusumo, R., Sinha, A. K. and Atyeo, S. V., 2004, ‘Crew capability evaluation for helicopter emergency medical service operations - Revised methodology’, in Proceedings of the 30th European Rotorcraft Forum, P. Rougier (ed.), Rotorcraft Forum Organising Committee, Marseilles (30th European Rotorcraft Forum).

Charlesworth, S., Kusumo, R., Sinha, A. K. and Atyeo, S. V., 2004, ‘Crew capability evaluation for helicopter emergency medical service operations - Detailed methodology’, in AHS International Forum 60 Conference, B. Blossom (ed.), MIRA Digital Publishing, St Louis (AHS International Forum 60 Conference).

Chen, Y. and Mahdavian, M. S., 2004, ‘Theoretical and experimental analyses of dielectric fluid flushing in electro discharge machining process’, in ICAMT-2004 Conference Proceedings, V. Venkatesh (ed.), International Islamic University Malaysia, Kuala Lumpur (Third International Conference on Advanced Manufacturing).

Daver, F., Awaja, F., Kosior, E. I., Gupta, R. and Cser, F., 2004, ‘Characterisation of reactive extruded recycled poly(ethylene terphthalate)’, in ANTEC 2004 Plastics: Annual Technical Conference, R. T. Newman (ed.), Society of Plastics Engineers, USA (ANTEC 2004).

Daver, F., Mahdavian, M. S., John, S. J. and Milton, J., 2004, ‘Development of a student-centred learning environment for a materials and processing course’, in Proceedings of Fourth Global Congress on Engineering Education, Z. Pudlowski (ed.), UNESCO International Centre for Engineering Education, Clayton, Vic., (Fourth Global Congress on Engineering Education).

Erakovic, L. and Subic, A. J., 2004, ‘CFD Modeling of slasher with single and double counter rotating blades’, in Proceedings of the International Conference on Scientific and Engineering Computation, IC-SEC, IC-SEC, Singapore, (International Conference on Scientific and Engineering Computation).

Garbutt, J. L., John, S. J. and Vinay, T., 2004, ‘Embedded systems for real-time control of a differential drive WMR’, in Proceedings of the International Conference on Embedded Systems and Applications, H. Arabnia et al. (ed.), CSREA, Las Vegas (International Conference on Embedded Systems and Applications).

Gibson, A. G., Wright, P., Wu, Y., Mouritz, A. P., Mathys, Z. and Gardiner, C. P., 2004, ‘Fire integrity of polymer composites using the two layer model’, in Proceedings of 49th SAMPE Symposium and Exhibition, J. E. Greer and S. R. Rodgers (ed.), SAMPE, Covina, USA (SAMPE 2004 Symposium and Exhibition).

Herrmann, P., Bil, C., Watkins, S. and Taylor, B., 2004, ‘Simulation and flight test of a temperature sensing stabilisation system’, in Proceedings of 19th Bristol Unmanned Air Vehicle Systems Conference, N. A. Mitchell (ed.), Koala Publishing, Bristol (19th Bristol Unmanned Air Vehicle Systems Conference).

8

Page 9: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Innes, A. W., Ciesielski, V., Mamutil, J. and John, S. J., 2004, ‘Reducing false alarms using genetic programming in object detection’, in Proceedings of the International Conference on Artificial Intelligence, H. R. Arabnia (ed.), CSREA Press, Las Vegas (2004 International Conference on Artificial Intelligence).

Jaitlee, R., Alam, F. and Watkins, S., 2004, ‘Pressure measurements on an automobile side rear view mirror’, in Proceedings of the 15th Australasian Fluid Mechanics Conference, M. Behnia et al. (ed.), University of Sydney, Sydney (15th Australasian Fluid Mechanics Conference).

Jama, H., Watkins, S., Dixon, C. W. and Ng, E. Y., 2004, ‘Airflow distribution through the radiator of a typical Australian passenger car’, in Proceedings of the 15th Australasian Fluid Mechanics Conference, M. Behnia et al. (ed.), University of Sydney (15th Australasian Fluid Mechanics Conference).

Jonnalagadda, S., Hoffmann, P. and Schrage, D. P., 2004, ‘Intelligent decision support system software for modelling upgrade design of maritime helicopters for anti-submarine missions’, in Proceedings of the 30th European Rotorcraft Forum, P. Rougier (ed.), Rotorcraft Forum Organising Committee, Marseilles (30th European Rotorcraft Forum).

Jonnalagadda, S., Sinha, A. K., Hoffmann, P. and Schrage, D. P., 2004, ‘Modelling upgrade design of maritime helicopters for anti-submarine missions - Project framework’, in AHS International Forum 60 Conference, G. Goankar (ed.), MIRA Digital Publishing, St Louis (AHS International Forum 60).

Kesavan, A., Li, H. C., John, S. J. and Herszberg, I., 2004, ‘Location of delamination damage in GFRP beams based on strain distribution’, in Proceedings of Second Australasian Workshop of Structural Health Monitoring, S.Galea et al. (ed.), Monash University, Melbourne (Second Australasian Workshop of Structural Health Monitoring).

Khan, A. A., Bil, C., Marion, K. E. and Crozier, M., 2004, ‘Real-time prediction of ship motion and attitude using advanced prediction techniques’, in Proceedings of the 24th Congress of Aeronautical Sciences, I. Grant (ed.), Optimage, Edinburgh (24th Congress of Aeronautical Sciences).

Kong, H. X., Mouritz, A. P. and Paton, R., 2004, ‘Dome forming of triaxial non-crimp fabrics’, in Composite Technologies for 2020, L. Ye et al. (ed.), University of Sydney (Fourth Asian-Australasian Conference on Composite Materials).

Kusumo, R., Sinha, A. K. and Schrage, D. P., 2004, ‘User interface design of an integrated decision support system for helicopters mid-life upgrade’, in AHS International Forum 60 Conference, G. Gaonkar (ed.), MIRA Digital Publishing, St Louis (AHS International Forum 60).

Lee, E. C., Forsyth, G. and Bil, C., 2004, ‘Detection indices and data management for a miniaturised health and usage monitoring system unit’, in Proceedings of the 24th Congress of the International Council of the Aeronautical Sciences, I. Grant (ed.), Optimage, Edinburgh (24th Congress of the International Council of the Aeronautical Sciences).

Li, H. C., Herszberg, I., Davis, G. E. and Mouritz, A. P., 2004, ‘Disbond detection in bonded composite ship joints using embedded Bragg grating sensors’, in Proceedings of the Second Australasian Workshop on Structural Health Monitoring, S. C. Galea and W. K. Chiu (ed.),

9

Page 10: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Workshop Organising Committee, Melbourne (Second Australasian Workshop on Structural Health Monitoring).

Mathers, N. M., Ghorbani, K. and Thompson, L. A., 2004, ‘Materials for inflatable communications structures’, in Proceedings of the Eighth Australian Space Development Conference, P. Young (ed.), National Space Society of Australia, Australia (Eighth Australian Space Development Conference).

McLachlan, N. M., Tsangalis, C. and Trivailo, P. M., 2004, ‘Historical analysis of 16th century cannon using modern techniques of finite element analysis’, in Proceedings of the Land Warfare Conference 2004, V. Puri et al. (ed.), DSTO, Melbourne (Land Warfare Conference).

Mouritz, A. P. and Mathys, Z., 2004, ‘Heat release of polymer composites in fire’, in Proceedings of the 49th SAMPE 2004 Symposium and Exhibition, J. Green et al. (ed.), SAMPE, Covine, USA (49th SAMPE 2004 Symposium and Exhibition).

Murad, N. M., Naser, J., Alam, F. and Watkins, S., 2004, ‘Simulation of vehicle A-Pillar aerodynamics using various turbulence models’, in Vehicle Aerodynamics 2004, J. Williams (ed.), Society of Automotive Engineers, Warrendale (SAE 2004 World Congress).

Murad, N. M., Naser, J., Alam, F. and Watkins, S., 2004, ‘Simulation of vehicle A Pillar aerodynamics of various yaw angles’, in Proceedings of the 15th Australasian Fluid Mechanics Conference, M. Behnia et al. (ed.), University of Sydney (15th Australasian Fluid Mechanics Conference).

Nguyen, T. M., Watkins, S. and Saunders, J. W., 2004, ‘The crosswind dynamic force on three-dimensional rectangular cylinders in turbulent winds’, in Summary Papers of the Fifth International Colloquium on Bluff Body Aerodynamics and Applications, K. Cooper (ed.), University of Ottawa, Ottawa (Fifth International Colloquium on Bluff Body Aerodynamics and Applications).

Nijland, T. C., Atyeo, S. V. and Sinha, A. K., 2004, ‘A simulation model for flight performance analysis of helicopter midlife upgrade designs’, in Proceedings of the 30th European Rotorcraft Forum, P. Rougier (ed.), Rotorcraft Forum Organising Committee, Marseilles (30th European Rotorcraft Forum).

Nousala, S. and John, S. J., 2004, ‘Tacit knowledge management networks and its implication in organisational prosperity’, in Proceedings of Qualcon 2004 Quality - The Key to Organisational Prosperity, J. Dalrymple et al. (ed.), Australian Organisation for Quality, Adelaide (Qualcon 2004 Quality - The Key to Organisational Prosperity).

Peebles, C. N. and Bil, C., 2004, ‘Multi-disciplinary design optimisation using parallel architectures’, in Proceedings of the 24th Congress of Aeronautical Sciences, I. Grant (ed.), Optimage, Edinburgh (24th Congress Aeronautical Sciences).

Peebles, C. N., Bil, C. and Drack, L., 2004, ‘Intelligent data storage and retrieval for design optimisation - An overview’, in Proceedings of Fourth International Conference on Advanced Engineering Design, L. Smrcek (ed.), Orgit, Glasgow (Fourth International Conference on Advanced Engineering Design).

10

Page 11: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Rademakers, N. G., Akmeliawati, R., Hill, R. D., Bil, C. and Nijmeijer, H., 2004, ‘Modelling and gain scheduled control of a tailless fighter’, in Proceedings of the Fifth Asian Control Conference, R. Evans and I. Mareels (ed.), University of Melbourne, Melbourne (Fifth Asian Control Conference).

Ren, H. and Yuan, D., 2004, ‘Civil aircraft dispatch reliability and related cost simulation analysis’, in Proceedings of Fouth International Conference on Advanced Engineering Design, L. Smrcek (ed.), Orgit, Glasgow (Fourth International Conference on Advanced Engineering Design).

Shilton, T., Abu-Hijleh, B. and Tu, J., 2004, ‘Optimisation of formula SAE race car intake manifold using CFD’, in Proceedings of HT-FED 2004, J. P. Delplanque (ed.), ASME, Charlotte, (ASME Heat Transfer/Fluids Engineering Summer Conference).

Singh, R., Akbarzadeh, A. and Mochizuki, M., 2004, ‘Capillary pumped loops: An overview’, in Proceedings of the First International Seminar on Heat Pipes and Heat Recovery Systems, O. Kok-Seng et al. (ed.), Monash University Malaysia (First International Seminar on Heat Pipes and Heat Recovery Systems).

Singh, R., Akbarzadeh, A., Dixon, C. W. and Mochizuki, M., 2004, ‘Experimental determination of the physical properties of a porous plastic wick useful for capillary pumped loop applications’, in Proceedings of the 13th International Heat Pipe Conference, Z. Hou et al. (ed.), Chinese Academy of Space Technology, Shanghai (13th International Heat Pipe Conference).

Singh, R., Akbarzadeh, A., Dixon, C. W., Riehl, R. R. and Mochizuki, M., 2004, ‘Design, analysis and investigation of a medium scale capillary pumped loop’, in Proceedings of the 13th International Heat Pipe Conference, Z. Hou et al. (ed.), Chinese Academy of Space Technology, Shanghai (13th International Heat Pipe Conference).

Sinha, A. K., Jonnalagadda, S., Hoffmann, P., Atyeo, S. V. and Schrage, D. P., 2004, ‘Modelling upgrade design of maritime helicopters for anti-submarine missions - Automation process’, in Proceedings of the 24th International Congress of Aeronautical Sciences, I. Grant (ed.), Optimage, UK, (24th International Congress of the Aeronautical Sciences).

Sinha, A. K., Kusumo, R., Hogan, P., Laycock, K. and Atyeo, S. V., 2004, ‘Automation of pre-mission success evaluation module for medical emergency helicopters operations’, in Proceedings of 24th International Congress of Aeronautical Sciences, I. Grant (ed.), Optimage, UK (24th International Congress of the Aeronautical Sciences).

Sinha, A. K., Schauenburg, A. and Brueckner, B., 2004, ‘Multi-mission unmanned aerial vehicle concept: Modelling status’, in Proceedings of 24th International Congress of the Aeronautical Sciences, I. Grant (ed.), Optimage, UK (24th International Congress of the Aeronautical Sciences).

Sinha, A. K., Schauenburg, A., Zimmermann, M. and Brueckner, B., 2004, ‘An intelligent system for a conceptual design of a re-configurable UAV’, in UAV 19th International Conference, N. Mitchell (ed.), University of Bristol, Bristol (19th UAV Systems Conference).

Subic, A. J. and Cvetkovic, D., 2004, ‘Modelling of compact fast acting fuel injector solenoids’, in Proceedings of the FISITA 2004 World Automotive Congress, FISITA, Sociedad de Tecnicos de Automocion, Barcelona (FISITA 2004 World Automotive Congress).

11

Page 12: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Subic, A. J., Hoang, G-H. and Alam, F., 2004, ‘Virtual design and evaluation of a polycarbonate face guard for cricket helmuts’, in Proceedings of the fifth Engineering of Sport Conference, M.Hubbard et al. (ed.), International Sports Engineering Association, Sheffield, USA (Fifth International conference on the Engineering of Sport).

Subic, A. J., Ilie, K. R. and Abu-Hijleh, B., 2004, ‘Parametric modelling of rotor profiles for a high performance supercharger’, in World Automotive Congress, FISITA, Sociedad de Tecnicos de Automocion, Barcelona (World Automotive Congress).

Tan, B. T. and Alam, F., 2004, ‘Finite element analysis of a VLOM deepwell handpump’, in Proceedings of Second BSME-ASME International Conference on Thermal Engineering, M. Hossain (ed.), Bangladesh Society of Mechanical Engineers, Dhaka (Second BSME-ASME International Conference on Thermal Engineering).

Tang, H., Tu, J., Li, H., Xue, C. C., Li, C. G. and Abu-Hijleh, B., 2004, ‘Dynamic analysis of airflow features in a 3D real-anatomical geometry of the human nasal cavity’, in Proceedings of the 15th Australasian Fluid Mechanics Conference, M. Behnia et al. (ed.), University of Sydney, Sydney (15th Australasian Fluid Mechanics Conference).

Thompson, L. A., Honan, P., Bil, C. and Bonnea, A., 2004, ‘Pollinating of plants in space’, in Proceedings of Fourth Australian Space Science Conference, W. Short (ed.), National Space Society of Australia, Sydney (Fourth Australian Space Science Conference).

Tian, Z., Tu, J. and Yeoh, G. H., 2004, ‘On numerical simulation of dilute gas-particle flow over a backward facing step: Lagrangian versus Eulerian approach’, in Proceedings of the Second International Symposium on two-phase flow modelling and experimentation, G. Celata et al. (ed.), Edizioni ETS, Pisa (Second International Symposium on two-phase flow modelling and experimentation).

Tian, Z., Tu, J., Yeoh, G. H. and Yuen, R., 2004, ‘Comparison of turbulence models for prediction of contaminant particle concentration in a ventilated room’, in Proceedings of the Fifth International Conference on Multiphase flow, Y Matsumoto et al. (ed.), ICMF, Yokohama (Fifth International Conference on Multiphase flow).

Tong, P. and Bil, C., 2004, ‘Genetic algorithm control parameters design for direct-value and real-value encoding’, in Proceedings of Fourth International Conference on Advanced Engineering Design, L. Smrcek (ed.), Orgit, Glasgow (Fourth International Conference on Advanced Engineering Design).

Tong, P., Bil, C. and Galanis, G., 2004, ‘Genetic algorithm applied to a forced landing manoeuvre’, in Proceedings of 24th Congress of the International Council of the Aeronautical Sciences, I. Grant (ed.), Optimage, Edinburgh (24th Congress of the International Council of the Aeronautical Sciences).

Tong, P., Bil, C. and Galanis, G., 2004, ‘Horizontal wind effects on flight paths design for a forced landing manoeuvre’, in Proceedings of Fourth International Conference on Advanced Engineering Design, L. Smrcek (ed.), Orgit, Glasgow (Fourth International Conference on Advanced Engineering Design).

12

Page 13: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Trivailo, P. M. and Gilbert, T., 2004, ‘Dynamic modelling of flexible space robotic manipulators during payload capture’, in Proceedings of the 55th International Astronautical Federation Congress, A. Misra (ed.), International Astronautical Federation, Vancouver (55th International Astronautical Federation Congress).

Trivailo, P. M., Dulikravich, G. S., Sgarioto, D. E. and Gilbert, T., 2004, ‘Inverse problem of aircraft structural parameter estimation: Application of neural networks’, in Proceedings of the Inverse Problems, Design and Optimization Symposium, G. Dulikravich et al. (ed.), Federal University of Rio de Janeiro (Inverse Problems, Design and Optimization Symposium).

Trivailo, P. M., Gilbert, T., Glessich, E. and Sgarioto, D. E., 2004, ‘Inverse problem of aircraft structural parameter estimation: Application of genetic algorithms compared with artificial neural networks’, in Proceedings of the Inverse Problems, Design and Optimization Symposium, G Dulikravich et al. (ed.), Federal University of Rio de Janeiro (Inverse Problems, Design and Optimization Symposium).

Trivailo, P. M., Sgarioto, D. E. and Blanksby, C. M., 2004, ‘Optimal control of aerial tethers for payload rendezvous’, in Proceedings of The 5th Asian Control Conference, R Evans and I Mareels (ed.), The University of Melbourne, Melbourne (The 5th Asian Control Conference) (ASCC) .

Trivailo, P. M., Williams, P. D. and Plotnikova, L., 2004, ‘On the optimal placement of control actuators for large smart space structures’, in Proceedings of the 55th International Astronautical Federation Congress, P.Bainum (ed.), AIAA, Reston, USA (55th International Astronautical Federation Congress).

Tu, J., Abu-Hijleh, B., Xue, C. C. and Li, C. G., 2004, ‘CFD simulation of air/particle flow in the human nasal cavity’, in Proceedings of Fifth International Conference on Multiphase Flow, Y.Matsumoto et al. (ed.), ICMF, Yokohama (Fifth International Conference on Multiphase Flow).

Tu, J., Yeoh, G. H., Park, G-C. and He, X., 2004, ‘Coupling of two-fluid model with population balance model for subcooled boiling flow prediction’, in Proceedings of HT-FED 2004, J. P. Delplanque (ed.), ASME, Charlotte (ASME Heat Transfer/Fluids Engineering Summer Conference).

van der Velden, C., Wickramanayake, V., Tan, Y., Ho, I., Shi, M. and Bil, C., 2004, ‘Pioneering interstellar space’, in Proceedings of Fourth Australian Space Science Conference, W. Short (ed.), National Space Society of Australia, Sydney (Fourth Australian Space Science Conference).

Vino, G. and Watkins, S., 2004, ‘A thirteen probe hole probe for measurements in bluff body wakes’, in Summary papers of Fifth International Colloquium on Bluff Body Aerodynamics and Applications, K. Cooper (ed.), University of Ottawa, (Fifth International Colloquium on Bluff Body Aerodynamics and Applications).

Vino, G., Watkins, S., Mousley, P. D., Watmuff, J. and Prasad, S. M., 2004, ‘Unsteady near-wake of a simplified passenger car’, in Proceedings of 15th Australasian Fluid Mechanics Conference, M. Behnia et al. (ed.), University of Sydney, Sydney (15th Australasian Fluid Mechanics Conference).

13

Page 14: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Watkins, S., 2004, ‘On the causes of image blurring in external rear view mirrors’, in Vehicle Aerodynamics 2004, J. Williams (ed.), Society of Automotive Engineers, Warrendale (SAE 2004 World Congress).

Watkins, S. and Vino, G., 2004, ‘On vehicle spacing and its effect on drag and lift’, in Summary Paper of Fifth International Colloquium on Buff Body Aerodynamics and Applications, K. Cooper (ed.), University of Ottawa (Fifthth International Colloquium on Buff Body Aerodynamics and Applications).

Watkins, S. and Vino, G., 2004, ‘The turbulent wind environment of birds, insects and MAVs’, in Proceedings of the 15th Australasian Fluid Mechanics Conference, M. Behmia et al. (ed.), University of Sydney (15th Australasian Fluid Mechanics Conference).

Watkins, S., Mousley, P. and Vino, G., 2004, ‘The development and use of dynamic pressure probes with extended cones of acceptance’, in Proceedings of the 15th Australasian Fluid Mechanics Conference, M. Behnia et al. (ed.), University of Sydney (15th Australasian Fluid Mechanics Conference).

Watmuff, J., 2004, ‘Evolution of a turbulent wedge from a streamwise streak’, in Proceedings of 15th Australasian Fluid Mechanics Conference, M. Behnia et al. (ed.), University of Sydney, Sydney (15th Australasian Fluid Mechanics Conference).

Watmuff, J., Vino, G., Watkins, S. and Hill, B. A., 2004, ‘Dynamic measurement of differential buffet pressure’, in Proceedings of 15th Australasian Fluid Mechanics Conference, M. Behnia et al. (ed.), University of Sydney, Sydney (15th Australasian Fluid Mechanics Conference).

Wickramanayake, V., Bourmistrova, A. and Bil, C., 2004, ‘Optimisation strategies for military conflict simulation’, in Proceedings of Fifth Asian Control Conference, R. Evans and I. Mareels (ed.), IEEE, Melbourne (Fifth Asian Control Conference).

Williams, P. D., 2004, ‘Guidance and control of tethered satellite systems using pseudospectral methods’, in 14th Space Flight Mechanics Meeting, Proceedings, P. Bainum (ed.), American Astronautical Society, San Diego (14th Space Flight Mechanics Meeting).

Williams, P. D. and Trivailo, P. M., 2004, ‘Cable deployment control for towed aerial-cable payload pick-up and delivery system’, in Proceedings of the Land Warfare Conference 2004: Weapons, Webs and Warfighters, V. Puri et al. (ed.), Defence Science and Technology Organisation, Melbourne (Land Warfare Conference).

Williams, P. D. and Trivailo, P. M., 2004, ‘Space applications of hybrid optimal control’, in Proceedings of the 55th International Astronautical Federation Congress, A Misra (ed.), International Astronautical Federation, Vancouver (55th International Astronautical Federation Congress).

Yeoh, G. H. and Tu, J., 2004, ‘A unified model considering force balances for departing vapour bubbles and population balance in subcooled boiling flow’, in Proceedings of Third International Symposium on Two-phase Flow Modelling and Experimentation, G. P. Celata et al. (ed.), Edizioni ETS, Pisa (Third International Symposium on Two-phase Flow Modelling and Experimentation).

14

Page 15: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Yeoh, G. H. and Tu, J., 2004, ‘Modelling gas-liquid bubbly flows’, in Proceedings of 15th Australasian Fluid Mechanics Conference, M. Behnia et al. (ed.), University of Sydney, Sydney (15th Australasian Fluid Mechanics Conference).

Yuen, Y. C., Schauenburg, A. and Sinha, A. K., 2004, ‘A systems approach to the conceptual design of a vertical takeoff unmanned aerial vehicle for close reconnaissance and surveillance’, in UAVs 19th International Conference, N. Mitchell (ed.), University of Bristol, Bristol (19th Bristol UAV International Conference).

School of Applied Sciences

Book Chapters Adams, M. J. and Romeo, M., 2004, ‘Chemometrics in elemental analysis’, in Atomic Spectroscopy in Elemental Analysis, Blackwell Publishing, Oxford, pp. 282-307, ISBN 1-84127-333-3.

Cornell, H. J., 2004, ‘The functionality of wheat starch’, in Starch in Food: Structure, Function and Applications, Woodhead Publishing, Cambridge, pp. 211-240, ISBN 1-85573-731-0.

Marriott, P. J., 2004, ‘Gas chromatography’, in Chromatography: Part A Fundamentals and Applications of Chromatography and Related Differential Migration Methods, Elsevier, Amsterdam, pp. 319-368, ISBN 0-444-51107-5.

May, B., 2004, ‘Dehydrated tomatoes’, in Handbook of Vegetable Preservation and Processing, Marcel Dekker, New York, pp. 395-408, 0-8247-4301-6.

Shanks, R. A., 2004, ‘Alternative solutions: Recyclable synthetic fibre-thermoplastic composites’, in Green Composites: Polymer Composites and the Environment, Woodhead, Cambridge, UK, pp. 100-122, 1-85573-739-6.

Journal Articles Akolekar, D. B. and Bhargava, S. K., 2004, ‘Investigations on the novel niobium incorporated mesoporous catalytic materials’, in Journal of Molecular Catalysis A: Chemical, Elsevier, Amsterdam, vol. 219, pp. 301-308, ISSN 1381-1169.

Akolekar, D. B., Foran, G. and Bhargava, S. K., 2004, ‘X-ray absorption spectroscopic studies on gold nanoparticles in mesoporous and microporous materials’, in Journal of Synchrotron Radiation, Blackwell Munksgaard, Copenhagen, vol. 11, pp. 284-290, ISSN 0909-0495.

Allahham, A., Mainwaring, D. E., Stewart, P. and Marriott, J., 2004, ‘Development and application of a micro-capillary rheometer for in-vitro evaluation of parenteral injectability’, in Journal of Pharmacy and Pharmacology, Pharmaceutical Press, UK, vol. 56, pp. 709-716, ISSN 0022-3573.

Allahham, A., Stewart, P., Marriott, J. and Mainwaring, D. E., 2004, ‘Flow and injection characteristics of pharmaceutical parenteral formulations using a micro-capillary rheometer’, in International Journal of Pharmaceutics, Elsevier, Amsterdam, vol. 270, pp. 139-148, ISSN 0378-5173.

15

Page 16: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Amarasinghe, G. and Shanks, R. A., 2004, ‘TMDSC analysis of single-site copolymer blends after thermal fractionation’, in Journal of Thermal Analysis and Calorimetry, Kluwer Academic, Budapest, vol. 78, pp. 349-361, ISSN 1388-6150.

Attar-bashi, N. M., Frauman, A. and Sinclair, A., 2004, ‘Alpha-linolenic acid and the risk of prostate cancer: What is the evidence?’, in Journal of Urology, Lippincott Williams and Wilkins, USA, vol. 171, pp. 1402-1407, ISSN 0022-5347.

Audsley, J. M. and Tannock, G. A., 2004, ‘The role of cell culture vaccines in the control of the next influenza pandemic’, in Expert Opinion on Biological Therapy, Ashley Publications, London, vol. 4, pp. 709-717, ISSN 1471-2598.

Barnard, A. S., Bath, P. J., Russo, S. P. and Snook, I. K., 2004, ‘A Monte Carlo study of surface reconstruction in (100) and (111) diamond surfaces and nanodiamond’, in Molecular Simulation, Taylor and Francis, United Kingdom, vol. 30, pp. 1-8, ISSN 0892-7022.

Barnard, A. S., Russo, S. P. and Snook, I. K., 2004, ‘Bucky wires and the instability of diamond (111) surfaces in one dimension’, in Journal of Nanoscience and Nanotechnology, American Scientific, USA, vol. 4, pp. 151-156, ISSN 1533-4880.

Barnard, A. S., Russo, S. P. and Snook, I. K., 2004, ‘From nanodiamond to diamond nanowires: Structural properties affected by dimension’, in Philosophical Magazine, Taylor and Francis, Abingdon, UK, vol. 84, pp. 899-907, ISSN 1478-6435.

Benedek, N. A., Yarovsky, I., Latham, K. and Snook, I. K., 2004, ‘Quantum Monte Carlo study of water molecule: A preliminary investigation’, in Australian Journal of Chemistry, CSIRO Publishing, Melbourne, vol. 57, pp. 1229-1232, 12, ISSN 0004-9425.

Bennett, A., Daivis, P. J., Shanks, R. A. and Knott, R., 2004, ‘Concentration dependence of static and hydrodynamic screening lengths for three different polymers in a variety of solvents’, in Polymer, Elsevier, Oxford, vol. 45, pp. 8531-8540, ISSN 0032-3861.

Bennett, M. A., Bhargava, S. K., Bond, A. M., Edwards, A. J., Guo, S-X., Priver, S. H., Rae, A. D. and Willis, A., 2004, ‘Synthesis, characterization and electrochemical relationships of dinuclear complexes of platinum(II) and platinum(III) containing ortho-metalated tertiary arsine ligands’, in Inorganic Chemistry, American Chemical Society, Washington, DC, vol. 43, pp. 7752-7763, ISSN 0020-1669.

Berglez, J. M., Iliades, P., Sirawaraporn, W., Coloe, P. J. and Macreadie, I., 2004, ‘Analysis in Escherichia coli of Plasmodium falciparum dihydropteroate synthase (DHPS) alleles implicated in resistance to sulfadoxine’, in International Journal for Parasitology, Elsevier, Oxford, vol. 34, pp. 95-100, ISSN 0020-7519.

Brooks, M., Sasadeusz, J. J. and Tannock, G. A., 2004, ‘Antiviral chemotherapeutic agents against respiratory viruses: Where are we now and what's in the pipeline?’, in Current Opinion in Pulmonary Medicine, Lippincott Williams and Wilkins, Philadelphia, vol. 10, pp. 197-203, ISSN 1070-5287.

Bryant, G. and Koster, K., 2004, ‘Dehydration of solute-lipid systems: Hydration forces analysis’, in Colloids and Surfaces B, Elsevier, Amsterdam, vol. 35, pp. 73-79, ISSN 0927-7765.

16

Page 17: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Buchanan, W., Roddick, F. A., Porter, N. A. and Drikas, M., 2004, ‘Enhanced biodegradability of UV and VUV pre-treated natural organic matter’, in Water Science and Technology: Water Supply, IWA Publishing, UK, vol. 4, pp. 103-111, 4, ISSN 1606-9749.

Budi, A., Legge, S., Treutlein, H. and Yarovsky, I., 2004, ‘Effect on external stresses on protein conformation: A computer modelling study’, in European Biophysics Journal, Springer, Germany, vol. 33, pp. 121-129, ISSN 0175-7571.

Cato, L., Bui, L. and Small, D., 2004, ‘Catalysts on the menu: Roles of enzymes in foods’, in Chemistry in Australia, Royal Australian Chemical Institute, Melbourne, vol. 71, pp. 6-7, 3, ISSN 0314-4240.

Chen, F., Shanks, R. A. and Amarasinghe, G., 2004, ‘Molecular distribution analysis of melt-crystallised ethylene copolymers’, in Polymer International, John Wiley, United Kingdom, vol. 53, pp. 1795-1805, ISSN 0959-8103.

Chen, F., Shanks, R. A. and Amarasinghe, G., 2004, ‘Structural and mechanical properties changes of ethylene-alpha-olefin copolymer blends induced by thermal treatments and composition’, in Micromolecular Materials and Engineering, Wiley-VCH, Germany, vol. 289, pp. 552-561, ISSN 1438-7492.

Choudhary, V. R., Patil, N. S., Chaudhari, N. K. and Bhargava, S. K., 2004, ‘Biphasic selective epoxidation of styrene by t-butyl hydroperoxide to styrene oxide using potassium chromate or dichromate catalyst in aqueous medium’, in Catalysis Communications, Elsevier, Amsterdam, vol. 5, pp. 205-208, ISSN 1566-7367.

Clarke, R., Latham, K., Rix, C. J. and Hobday, M. D., 2004, ‘Heterocyclic amine derivatives of zinc organophosphonates’, in Chemistry of Materials, American Chemical Society, Washington, DC, vol. 16, pp. 2463-2470, ISSN 0897-4756.

Clarke, R., Latham, K., Rix, C. J., Hobday, M. D. and White, J. M., 2004, ‘Supramolecular bidentate amine derivatives of copper(II) organophosphonates’, in CrystEngComm, Royal Society of Chemistry, Cambridge, UK, vol. 6, pp. 42-50, 10, ISSN 1466-8033.

Cunnington, J. H., Lawrie, A. C. and Pascoe, I., 2004, ‘Molecular determination of anamorphic powdery mildew fungi on the Fabaceae in Australia’, in Australasian Plant Pathology, CSIRO Publishing, Melbourne, vol. 33, pp. 281-284, ISSN 0815-3191.

Cunnington, J. H., Lawrie, A. C. and Pascoe, I., 2004, ‘Molecular characterisation of Sawadaea anamorphs in Australia’, in Australasian Mycologist, Australasian Mycological Society, Canberra, vol. 23, pp. 37-40, ISSN 1441-5526.

Cunnington, J. H., Lawrie, A. C. and Pascoe, I., 2004, ‘Unexpected ribosomal DNA internal transcribed spacer sequence variation within Erysiphe aquliegiae sensu lato’, in Fungal Diversity, Fungal Diversity Press, Yunnan, China, vol. 16, pp. 1-10, ISSN 1560-2745.

Davies, K. E., Gan, B. K., McKenzie, D., Bilek, M., Taylor, M. B., McCulloch, D. G. and Latella, B. A., 2004, ‘Correlation between stress and hardness in pulsed cathodic arc deposited titanium/vanadium nitride alloys’, in Journal of Physics: Condensed Matter, IOP Publishing, Bristol, vol. 16, pp. 7947-7954, ISSN 0953-8984.

17

Page 18: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Di, X., Shellie, R., Marriott, P. J. and Huie, C., 2004, ‘Application of headspace solid-phase microextraction (HS-SPME) and comprehensive two-dimensional gas chromatography (GC x GC) for the chemical profiling of volatile oils in complex herbal mixtures’, in Journal of Separation Science, Wiley-VCH, Germany, vol. 27, pp. 451-458, ISSN 1615-9306.

Dimech, W. and Grando, D., 2004, ‘Continuing education in clinical microbiology: A survey to determine scientists' attitudes to existing programmes’, in Australian Journal of Medical Science, Australian Institute of Medical Scientists, Milton, Qld, vol. 25, pp. 129-139, 3, ISSN 1038-1643.

Ding, W., Johnston, P. N., Wong, T. P. and Bubb, I., 2004, ‘Investigation of photon beam models in heterogeneous media of modern radiotherapy’, in Australasian Physical and Engineering Sciences in Medicine, Australian College of Physical Scientists and Engineers in Medicine, Australia, vol. 27, pp. 39-48, ISSN 0158-9938.

Dunn, M. S., Shellie, R. A., Morrison, P. D. and Marriott, P. J., 2004, ‘Rapid sequential heart-cut multidimensional gas chromatographic analysis’, in Journal of Chromatography A, Elsevier, Amsterdam, vol. 1056, pp. 163-169, ISSN 0021-9673.

Franich, R., Johnston, P. N. and Bubb, I., 2004, ‘Efficient Monte Carlo simulation of heavy ion elastic recoil detection analysis spectra’, in Nuclear Instruments and Methods in Physics Research B, Elsevier, Amsterdam, vol. 219-20, pp. 87-94, ISSN 0168-583X.

Gaffney, B. T., Hugel, H. M. and Rich, P., 2004, ‘The chromatographic co-elution of dihydrodehydrodiconiferyl alcohol monopyranose with eleutheroside E in Eleutherococcus senticosus: Implications for eleutheroside E Assays’, in Phytochemical Analysis, John Wiley, United Kingdom, vol. 15, pp. 231-234, ISSN 0958-0344.

Gakiad, S., Rix, C. J., Fowless, A., Wills-Johnson, G., Latham, K. and White, J. M., 2004, ‘A comparison of the intramolecular and intermolecular hydrogen bonding of N,N'-ethylenebis(aminobenzylidene) in the solid state with its salen analogue’, in Journal of Molecular Structure, Elsevier, Netherlands, vol. 737, pp. 69-74, ISSN 0022-2860.

Gan, B. K., Bilek, M., McKenzie, D., Shi, Y., Tompsett, D. A., Taylor, M. B. and McCulloch, D. G., 2004, ‘Stress relief and texture formation in aluminium nitride by plasma immersion ion implantation’, in Journal of Physics: Condensed matter, IOP Publishing, Bristol, vol. 16, pp. 1751-1760, ISSN 0953-8984.

Gan, B. K., Bilek, M., McKenzie, D., Taylor, M. B. and McCulloch, D. G., 2004, ‘Effect of intrinsic stress on preferred orientation in AIN thin films’, in Journal of Applied Physics, American Institute of Physics, New York, vol. 95, pp. 2130-2134, ISSN 0021-8979.

Gasparro, J., Hult, M., Komura, K., Arnold, D., Holmes, L., Johnston, P. N., Laubenstein, M., Neumaier, S., Reyss, J. L., Shillebeeckx, P., Tagziria, H., Van Britsom, G. and Vasselli, R., 2004, ‘Measurement of cobalt-60 in spoons activated by neutrons during the JCO criticality accident at Tokai-mura in 1999’, in Journal of Environmental Radioactivity, Elsevier, UK, vol. 73, pp. 307-321, ISSN 0265-931X.

Genovese, A. and Shanks, R. A., 2004, ‘Crystallisation and melting of isotactic polypropylene in response to temperature modulation’, in Journal of Thermal Analysis and Calorimetry, Kluwer Academic, Budapest, vol. 75, pp. 233-248, ISSN 1388-6150.

18

Page 19: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Genovese, A. and Shanks, R. A., 2004, ‘Dynamic mechanical properties of poly(propylene) blends with poly[ethylene-co-(methyl acrylate)]’, in Macromolecular Materials and Engineering, Wiley-VCH, Germany, vol. 289, pp. 20-32, ISSN 1438-7492.

Gower, M. and Shanks, R. A., 2004, ‘The effect of chain transfer agent level on adhesive performance and peel master-curves for acrylic pressure sensitive adhesives’, in Macromolecular Chemistry and Physics, Wiley-VCH, Germany, vol. 205, pp. 2139-2150, ISSN 1022-1352.

Gower, M. and Shanks, R. A., 2004, ‘The effect of varied monomer composition on adhesive performance and peeling master curves for acrylic pressure-sensitive adhesives’, in Journal of Applied Polymer Science, John Wiley, New York, vol. 93, pp. 2909-2917, ISSN 0021-8995.

Grochola, G. M., Russo, S. P. and Snook, I. K., 2004, ‘On computer simulation methods for calculating 'exact' surface formation free energies of steps and (1x2) missing row reconstructions’, in Surface Science, Elsevier, Oxford, vol. 560, pp. 226-234, ISSN 0039-6028.

Grochola, G. M., Russo, S. P., Yarovsky, I. and Snook, I. K., 2004, ‘'Exact' surface free energies of iron surfaces using a modified embedded atom method potential and lambda-integration’, in Journal of Chemical Physics, American Institute of Physics, New York, vol. 120, pp. 3425-3430, ISSN 0021-9606.

Gunaratne, L. W., Shanks, R. A. and Amarasinghe, G., 2004, ‘Thermal history effects on crystallisation and melting of poly(3-hydroxybutyrate)’, in Thermochimica Acta, Elsevier, Amsterdam, vol. 423, pp. 127-135, ISSN 0040-6031.

Han, X., Shanks, R. A. and Pavel, D., 2004, ‘Synthesis and characterisation of side-chain liquid crystalline poly[1-([(4-cyano-4'- biphenyl)oxy]alkyloxy)-2,3-epoxypropane]’, in Macromolecular Chemistry and Physics, Wiley-VCH, Germany, vol. 205, pp. 743-751, ISSN 1022-1352.

He, W. and Shanks, R. A., 2004, ‘Identification of an unknown assistant blowing agent in AC blowing system’, in Guangpuxue yu Guangpu Fenxi, Zhongguo Guangpuxue Xuehui, China, vol. 24, pp. 1553-1555, ISSN 1000-0593.

Houshyar, S. and Shanks, R. A., 2004, ‘Tensile properties and creep response of polypropylene fibre composites with variation of fibre diameter’, in Polymer International, John Wiley, London, vol. 53, pp. 1752-1759, ISSN 0959-8103.

Hugel, H. M., 2004, ‘Obesity’, in Chemistry in Australia, Royal Australian Chemical Institute, Melbourne, vol. 9, pp. 16-18, ISSN 0314-4240.

Hughes, J. G., Shanks, R. A. and Cerezo, F. T., 2004, ‘Characterisation of the comonomer composition and distribution of copolymers using chemometric techniques’, in Journal of Thermal Analysis and Calorimetry, Kluwer Academic, Budapest, vol. 76, pp. 1069-1078, ISSN 1388-6150.

Hung, A., Russo, S. P. and McCulloch, D. G., 2004, ‘An ab initio study of structural properties and single vacancy defects in Wurtzite AIN’, in Journal of Chemical Physics, American Institute of Physics, New York, vol. 120, pp. 4890-4897, ISSN 0021-9606.

Hung, A., Yarovsky, I. and Russo, S. P., 2004, ‘Density-functional theory of xanthate adsorption on the pyrite FeS2(100) surface’, in Philosophical Magazine Letters, Taylor and Francis, UK,

19

Page 20: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

vol. 84, pp. 175-182, 3, ISSN 0950-0839.

Huynh, T. T., Mclean, C. B., Coates, F. and Lawrie, A. C., 2004, ‘Effect of developmental stage and peloton morphology on success in isolation of mycorrhizal fungi in Caladenia formosa (Orchidaceae)’, in Australian Journal of Botany, CSIRO Publishing, Melbourne, vol. 52, pp. 231-241, ISSN 0067-1924.

Istivan, T., Coloe, P. J., Fry, B., Ward, P. and Smith, S. C., 2004, ‘Characterization of a haemolytic phospholipase A2 activity in clinical isolates of Campylobacter concisus’, in Journal of Medical Microbiology, Society of General Microbiology, Reading, England, vol. 53, pp. 1-11, ISSN 0022-2615.

Kairn, T., Daivis, P. J., Matin, M. L. and Snook, I. K., 2004, ‘Concentration dependence of viscometric properties of model short chain polymer solutions’, in Polymer, Elsevier, Oxford, vol. 45, pp. 2453-2464, ISSN 0032-3861.

Kairn, T., Daivis, P. J., Matin, M. L. and Snook, I. K., 2004, ‘Effects of concentration on steady state viscometric properties of short chain polymer solutions over the entire concentration range’, in International Journal of Thermophysics, Kluwer Academic, New York, vol. 25, pp. 1075-1084, ISSN 0195-928X.

Kefford, B. J., Dalton, A., Palmer, C. G. and Nugegoda, D., 2004, ‘The salinity tolerance of eggs and hatchlings of selected aquatic macroinvertebrates in south-east Australia and South Africa’, in Hydrobiologia, Kluwer Academic, Dordrecht, vol. 517, pp. 179-192, ISSN 0018-8158.

Kefford, B. J., Palmer, C. G., Pakhomova, L. and Nugegoda, D., 2004, ‘Comparing test systems to measure the salinity tolerance of freshwater invertebrates’, in Water SA, Water Research Commission, Pretoria, South Africa, vol. 30, pp. 499-505, ISSN 0378-4738.

Kefford, B. J., Papas, P. J., Metzeling, L. and Nugegoda, D., 2004, ‘Do laboratory salinity tolerances of freshwater animals correspond with their field salinity?’, in Environmental Pollution, Elsevier, Oxford, vol. 129, pp. 355-362, ISSN 0269-7491.

Kitajka, K., Sinclair, A., Weisinger, R. S., Weisinger, H. S., Jayasooriya, A. P., Halver, J. E. and Puskas, L. G., 2004, ‘Effects of dietary omega-3 polyunsaturated fatty acids on brain gene expression’, in Proceedings of the US National Academy of Sciences, National Academy of Sciences, United States, vol. 101, pp. 10931-10936, ISSN 0027-8424.

Kularatne, G., Lawrie, A. C., Barber, P. A. and Keane, P. J., 2004, ‘A specific primer PCR and RFLP assay for the rapid detection and differentiation in planta of some Mycosphaerella species associated with foliar diseases of Eucalyptus globulus’, in Mycological Research, Cambridge University Press, Cambridge, vol. 108, pp. 1477-1493, ISSN 0953-7562.

Lennard, W. A. and Leonard, B. V., 2004, ‘A comparison of reciprocating flow versus constant flow in an integrated, gravel bed, aquaponic test system’, in Aquaculture International, Kluwer Academic, Dordrecht, vol. 12, pp. 539-553, ISSN 0967-6120.

Ley-Cooper, Y. and Macnae, J. C., 2004, ‘Model-consistent rescaling to correct amplitude calibration problems in HEM data’, in Exploration Geophysics, Australian Society of Exploration Geophysicists, Perth, vol. 35, pp. 277-282, ISSN 0812-3985.

20

Page 21: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Macnae, J. C., 2004, ‘Improving the accuracy of shallow depth determinations in AEM sounding’, in Exploration Geophysics, Australian Society of Exploration Geophysicists, Perth, vol. 35, pp. 203-207, 3, ISSN 0812-3925.

Macnae, J. C., Robb, T. and Vrbancich, J., 2004, ‘Rapid estimation of shallow seawater depth from airborne electromagnetics’, in Exploration Geophysics, Australian Society of Exploration Geophysicists, Perth, vol. 35, pp. 288-291, ISSN 0812-3985.

Marriott, P. J., Aryusuk, K., Shellie, R. A., Ryan, D., Krisnangkura, K., Schurig, V. and Trapp, O., 2004, ‘Molecular interconversion behaviour in comprehensive two-dimensional gas chromatography’, in Journal of Chromatography A, Elsevier, Amsterdam, vol. 1033, pp. 135-143, ISSN 0021-9673.

Marriott, P. J., Massill, T. and Hugel, H. M., 2004, ‘Molecular structure retention relationships in comprehensive two-dimensional gas chromatography’, in Journal of Separation Science, Wiley-VCH, Germany, vol. 27, pp. 1273-1284, ISSN 1615-9306.

Mathai, M. L., Soueid, M., Chen, N., Jayasooriya, A. P., Sinclair, A., Wlodek, M. E., Weisinger, H. S. and Weisinger, R. S., 2004, ‘Does perinatal omega-3 polyunsaturated fatty acid deficiency increase appetite signaling?’, in Obesity Research, North American Association for the Study of Obesity, USA, vol. 12, pp. 1886-1894, ISSN 1071-7323.

McCulloch, D. G., Peng, J. L., McKenzie, D., Lau, S. D., Sheeja, D. and Tay, B. K., 2004, ‘Mechanisms for the behavior of carbon films during annealing’, in Physical Review B, American Physical Society, New York, vol. 70, pp. 1-8, ISSN 1098-0121.

Mcgrane, S. J., Mainwaring, D. E., Cornell, H. J. and Rix, C. J., 2004, ‘The role of hydrogen bonding in amylose gelation’, in Starch, Wiley-VCH, Germany, vol. 56, pp. 122-131, ISSN 0038-9056.

Mollica, S., Sood, D., Evans, P. J., Noorman, J., Dytlewski, N., Brack, N., Pigram, P. and Latham, K., 2004, ‘Effect of aluminium ion implantation on the oxidation resistance of DC magnetron sputter-deposited TiB2 thin films’, in Surface and Coatings Technology, Elsevier, Lausanne, Switzerland, vol. 177-78, pp. 185-197, ISSN 0257-8972.

Mora-Huertas, N. E., Murugaraj, P. and Mainwaring, D. E., 2004, ‘Temperature-dependent transport properties in the semiconducting regime of nanoparticle carbon-polyimide composite films’, in Physica E, Elsevier, Amsterdam, vol. 24, pp. 119-123, ISSN 1386-9477.

Osborne, R. H., Sali, A., Aaronson, N. K., Elsworth, G., Mdzewski, B. and Sinclair, A., 2004, ‘Immune function and adjustment style: Do they predict survival in breast cancer?’, in Psycho-Oncology, John Wiley, UK, vol. 13, pp. 199-210, ISSN 1057-9249.

O'Sullivan, R. and McGregor, K. W., 2004, ‘Thermal lensing and optical bistability in ferroelectrics’, in Ferroelectrics, Taylor and Francis, USA, vol. 303, pp. 125-130, ISSN 0015-0193.

Ouajai, S., Hodzic, A. and Shanks, R. A., 2004, ‘Morphological and grafting modification of natural cellulose fibres’, in Journal of Applied Polymer Science, John Wiley, New York, vol. 94, pp. 2456-2465, ISSN 0021-8995.

21

Page 22: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Patel, O., Mberu, E. K., Nzila, A. M. and Macreadie, I., 2004, ‘Sulfa drugs strike more than once’, in Trends in Parasitology, Elsevier, Oxford, vol. 94, pp. 1-3, 1, ISSN 1471-4922.

Patil, N. S., Jha, R., Uphade, B. S., Bhargava, S. K. and Choudhary, V. R., 2004, ‘Epoxidation of styrene by anhydrous t-butyl hydroperoxide over gold supported on Al2O3, Ga2O3, In2O3 and Tl2O3’, in Applied Catalysis A: General, vol. 275, Elsevier, Amsterdam, pp. 87-93, 0926-860X.

Patil, N. S., Uphade, B. S., Jana, P., Bhargava, S. K. and Choudhary, V. R., 2004, ‘Epoxidation of styrene by anhydrous t-butyl hydroperoxide over reusable gold supported on MgO and other alkaline earth oxides’, in Journal of Catalysis, Elsevier, Amsterdam, vol. 223, pp. 236-239, ISSN 0021-9517.

Patil, N. S., Uphade, B. S., Jana, P., Sonawane, R. S., Bhargava, S. K. and Choudhary, V. R., 2004, ‘Epoxidation of styrene by andhydrous t-butyl hydroperoxide over Au/TiO2 catalysts’, in Catalysis Letters, Kluwer Academic, USA, vol. 94, pp. 89-93, ISSN 1011-372X.

Patil, N. S., Uphade, B. S., McCulloch, D. G., Bhargava, S. K. and Choudhary, V. R., 2004, ‘Styrene epoxidation over gold supported on different transition metal oxides prepared by homogeneous deposition-precipitation’, in Catalysis Communications, Elsevier, Amsterdam, vol. 5, pp. 681-685, ISSN 1566-7367.

Petersen, T., Yarovsky, I., Snook, I. K., McCulloch, D. G. and Opletal, G., 2004, ‘Microstructure of an industrial char by diffraction techniques and reverse Monte Carlo modelling’, in Carbon, Elsevier, Amsterdam, vol. 42, pp. 2457-2469, ISSN 0008-6223.

Prasad, J., Tardio, J., Akolekar, D. B., Bhargava, S. K. and Grocott, S. C., 2004, ‘Catalytic wet oxidation of stripped sour water from an oil-shale refining process’, in Industrial and Engineering Chemistry Research, American Chemical Society, New York, vol. 43, pp. 6363-6368, ISSN 0888-5885.

Preston, C., Amarasinghe, G., Hopewell, J., Shanks, R. A. and Mathys, Z., 2004, ‘Evaluation of polar ethylene copolymers as fire retardant nanocomposite matrices’, in Polymer Degradation and Stability, Elsevier, United Kingdom, vol. 84, pp. 533-544, ISSN 0141-3910.

Rainczuk, A., Scorza, T., Spithill, T. and Smooker, P. M., 2004, ‘A bicistronic DNA vaccine containing apical membrane antigen 1 and merozoite surface protein 4/5 can prime humoral and cellular immune responses and partially protect mice against virulent Plasmodium chabaudi adami DS Malaria’, in Infection and Immunity, American Society for Microbiology, Washington, DC, vol. 72, pp. 5565-5573, ISSN 0019-9567.

Ryan, D., Shellie, R., Tranchida, P. Q., Casilli, A., Mondello, L. and Marriott, P. J., 2004, ‘Analysis of roasted coffee bean volatiles by using comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry’, in Journal of Chromatography A, Elsevier, Amsterdam, vol. 1054, pp. 57-65, ISSN 0021-9673.

Saw, K. and du Plessis, J., 2004, ‘The x-ray photoelectron spectroscopy C 1s diamond peak of chemical vapour deposition diamond from a sharp interfacial structure’, in Materials Letters, Elsevier, Amsterdam, vol. 58, pp. 1344-1348, ISSN 0167-577X.

Scarpaci, C., Nugegoda, D. and Corkeron, P., 2004, ‘No detectable improvement in compliance to regulations by "swim-with-dolphin" operators in Port Phillip Bay, Victoria, Australia’, in

22

Page 23: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Tourism in Marine Environments, Cognizant Communications Corporation, USA, vol. 1, pp. 41-48, 1, ISSN 1544-273X.

Schiller, T. L., Sheeja, D., McKenzie, D., McCulloch, D. G., Lau, D. S., Burn, S. and Tay, B. K., 2004, ‘Plasma immersion ion implantation of poly(tetrafluoroethylene)’, in Surface and Coatings Technology, Elsevier, Switzerland, vol. 177-8, pp. 483-488, ISSN 0257-8972.

Shanks, R. A., Hodzic, A. and Wong, S., 2004, ‘Thermoplastic biopolyester natural fiber composites’, in Journal of Applied Polymer Science, John Wiley, USA, vol. 91, pp. 2114-2121, ISSN 0021-8995.

Shellie, R. A., Marriott, P. J. and Chaintreau, A., 2004, ‘Quantitation of suspected allergens in fragrances (Part 1): Evaluation of comprehensive two-dimensional gas chromatography for quality control’, in Flavour and Fragrance Journal, Wiley InterScience, United Kingdom, vol. 19, pp. 91-98, ISSN 0882-5734.

Shellie, R., Marriott, P. J. and Morrison, P., 2004, ‘Comprehensive two-dimensional gas chromatography with flame ionization and time-of-flight mass spectrometry detection: Qualitative and quantitative analysis of West Australian sandalwood oil’, in Journal of Chromatographic Science, Preston Publications, USA, vol. 42, pp. 417-422, ISSN 0021-9665.

Shellie, R. A., Marriott, P. J., Morrison, P. and Mondello, L., 2004, ‘Effects of pressure drop on absolute retention matching in comprehensive two-dimensional gas chromatography’, in Journal of Separation Science, Wiley-VCH, Germany, vol. 27, pp. 504-512, ISSN 1615-9306.

Shellie, R. A., Mondello, L., Casilli, A., Tranchida, P. Q., Marriott, P. J. and Dugo, G., 2004, ‘Ultra-fast essential oil characterization by capillary GC on a 50 um ID column’, in Journal of Separation Science, Wiley-VCH, Germany, vol. 27, pp. 699-702, ISSN 1615-9306.

Shellie, R., Mondello, L., Dugo, G. and Marriott, P. J., 2004, ‘Enantioselective gas chromatographic analysis of monoterpenes in essential oils of the family Myrtaceae’, in Flavour and Fragrance Journal, John Wiley, United Kingdom, vol. 19, pp. 582-585, ISSN 0882-5734.

Sinclair, A. and Weisinger, R. S., 2004, ‘Omega 3 fatty acids and the brain’, in Chemistry in Australia, Royal Australian Chemical Institute, Melbourne, vol. 71, pp. 6-9, 11, ISSN 0314-4240.

Skiba, B., Ford, R. and Pang, E. C., 2004, ‘Construction of a linkage map based on a Lathyrus sativus backcross population and preliminary investigation of QTLs associated with resistance to ascochyta blight’, in Theoretical and Applied Genetics, Springer, Germany, vol. 109, pp. 1726-1735, ISSN 0040-5752.

Skiba, B., Ford, R. and Pang, E. C., 2004, ‘Genetics of resistance to Mycosphaerella pinodes in Lathyrus sativus’, in Australian Journal of Agricultural Research, CSIRO Publishing, Melbourne, vol. 55, pp. 953-960, ISSN 0004-9409.

Smooker, P. M., Rainczuk, A., Kennedy, N. J. and Spithill, T., 2004, ‘DNA vaccines and their application against parasites - Promise, limitations and potential solutions’, in Biotechnology Annual Review, Elsevier, Amsterdam, vol. 10, pp. 189-236, ISSN 1387-2656.

Song, S. M., Marriott, P. J. and Wynne, P. M., 2004, ‘Comprehensive two-dimensional gas chromatography - quadrupole mass spectrometric analysis of drugs’, in Journal of

23

Page 24: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Chromatography A, Elsevier, Amsterdam, vol. 1058, pp. 223-232, ISSN 0021-9673.

Song, S. M., Marriott, P. J., Kotsos, A., Drummer, O. H. and Wynne, P. M., 2004, ‘Comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry (GC x GC-TOFMS) for drug screening and confirmation’, in Forensic Science International, Elsevier, Ireland, vol. 143, pp. 87-101, ISSN 0379-0738.

Spencer, M. J., Snook, I. K. and Yarovsky, I., 2004, ‘Effect of sulfur impurity on Fe(110) adhesion: A DFT study’, in Journal of Physical Chemistry B, American Chemical Society, Washington, DC, vol. 108, pp. 10965-10972, ISSN 1520-6106.

Tannock, G. A., 2004, ‘The changing face of virology: Will the application of molecular techniques inevitably lead to new and better vaccines?’, in Expert Review of Anti Infective Therapy, Future Drugs Ltd, London, vol. 2, pp. 663-666, ISSN 1478-7210.

Tardio, J., Bhargava, S. K., Eyer, S. and Akolekar, D. B., 2004, ‘Low-temperature wet oxidation of sodium salts of low molecular weight mono- and dicarboxylic acids in synthetic Bayer liquor’, in Industrial and Engineering Chemistry Research, American Chemical Society, New York, vol. 43, pp. 669-674, ISSN 0888-5885.

Tardio, J., Bhargava, S. K., Eyer, S., Sumich, M. and Akolekar, D. B., 2004, ‘Interactions between specific organic compounds during catalytic wet oxidation of Bayer liquor’, in Industrial and Chemical Engineering Research, American Chemical Society, New York, vol. 43, pp. 847-851, ISSN 0888-5885.

Thanomngam, P. and Johnston, P. N., 2004, ‘Monte Carlo simulation of Bremsstrahlung interference due to K-shell photoelectrons in Compton scattering experiments’, in Radiation Physics and Chemistry, Pergamon, United Kingdom, vol. 71, pp. 637-641, ISSN 0969-806X.

Toh, S., Hughes, A., McKenzie, D., McCulloch, D. G., du Plessis, J. and Stonham, A., 2004, ‘Characterisation of non-Cr-based deoxidizers on Al alloy 7475-T7651’, in Surface and Interface Analysis, John Wiley, New York, vol. 36, pp. 1523-1532, ISSN 0142-2421.

Trapp, J. V., Warrington, A. P., Partridge, M., Philps, A., Glees, J., Tait, D., Ahmed, R., Leach, M. O. and Webb, S., 2004, ‘Measurement of the three-dimensional distribution of radiation dose in grid therapy’, in Physics in Medicine and Biology, IOP Publishing, Bristol, vol. 49, pp. 317-323, ISSN 0031-9155.

Tu, L. Q., Rix, C. J., Wright, P. F. and Ahokas, J., 2004, ‘The subcellular distribution of defluorination activity in marsupial and rodent species’, in Australasian Journal of Ecotoxicology, Australasian Society for Ecotoxicology, Telopea, NSW, vol. 10, pp. 57-63, ISSN 1323-3475.

Wernert, G. T., Winkler, D. A., Holan, G. and Nicoletti, G., 2004, ‘Synthesis, biological activity and QSAR studies of antimicrobial agents containing biguanide isoteres’, in Australian Journal of Chemistry, CSIRO Publishing, Melbourne, vol. 57, pp. 77-85, ISSN 0004-9425.

Wong, S., Shanks, R. A. and Hodzic, A., 2004, ‘Interfacial improvements in poly(3-hydroxybutyrate)-flax fibre composites with hydrogen bonding additives’, in Composites Science and Technology, Elsevier, United Kingdom, vol. 64, pp. 1321-1330, ISSN 0266-3538.

24

Page 25: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Wong, S., Shanks, R. A. and Hodzic, A., 2004, ‘Mechanical behaviour and fracture toughness of poly(L-lactic acid)-natural fibre composites modified with hyperbranched polymers’, in Macromolecular Materials and Engineering, Wiley-VCH, Germany, vol. 289, pp. 447-456, ISSN 1438-7492.

Wu, S. and Shanks, R. A., 2004, ‘Solubility study of polyacrylamide in polar solvents’, in Journal of Applied Polymer Science, John Wiley, New York, vol. 93, pp. 1493-1499, ISSN 0021-8995.

Wu, S. and Shanks, R. A., 2004, ‘Synthesis and characterisation of hydrophobic modified polyacrylamide’, in Polymer International, John Wiley, United Kingdom, vol. 53, pp. 1821-1830, ISSN 0959-8103.

Xue, C. C., Hugel, H. M., Li, C. G. and Story, D. F., 2004, ‘Efficacy, chemistry and pharmacology of Chinese herbal medicine for allergic rhinitis’, in Current Medicinal Chemistry, Bentham Science, Netherlands, vol. 11, pp. 1403-1421, ISSN 0929-8673.

Yang, T., Zhang, H., Mu, H., Sinclair, A. and Xu, X., 2004, ‘Diacylglycerols from butterfat: Production by glycerolysis and short path distillation and analysis of physical properties’, in JAOCS, AOCS Press, USA, vol. 81, pp. 979-987, ISSN 0003-021X.

Zalizniak, L. and Nugegoda, D., 2004, ‘Maintenance of Daphnia carinata cultures for use in toxicity testing’, in Australasian Journal of Ecotoxicology, Australasian Society of Ecotoxicology, Sydney, vol. 10, pp. 65-69, ISSN 1323-3475.

Conference Publications Akolekar, D. B. and Bhargava, S. K., 2004, ‘Carbon monoxide and nitric oxide reactions over supported gold nanoparticles catalysts’, in Proceedings of 32nd Australasian Chemical Engineering Conference, A. A. Adesina (ed.), CHEMECA, Sydney (32nd Australasian Chemical Engineering Conference).

Al-Widyan, O. and Small, D., 2004, ‘Microencapsulation of bakery ingredients and the impact on bread characteristics: Effect of tartaric acid encapsulated with carnauba wax’, in Proceedings of the 12th ICC Cereal and Bread Congress, S. P. Cauvain et al. (ed.), Campden and Chorleywood Research Association, UK, (12th ICC Cereal and Bread Congress)

Awaja, F., Bhargava, S. K. and Adams, M. J., 2004, ‘Multivariate calibration of oil yield from oil shale using diffuse reflectance infrared Fourier transforms spectroscopy’, in Proceedings of 32rd Australasian Chemical Engineering Conference, A. A. Adesina (ed.), CHEMECA, Sydney (32nd Australasian Chemical Engineering Conference).

Casonato, S., Lawrie, A. C., Butler, K. and McLaren, D., 2004, ‘Endemic fungi inhibit germination of serrated tussock seed: An alternative to classical biological control?’, in Weed Management: Balancing People, Planet, Profit, B. M. Sindel and S. B. Johnson (ed.), Weed Society of New South Wales, Sydney (14th Australian Weeds Conference).

Coram, T. E. and Pang, E. C., 2004, ‘Discovering and characterising the genetic mechanism controlling the resistance response to Ascochyta blight (Ascochyta rabiei) in chick Pea (Cicer arietinum)’, in Proceedings of the 4th International Crop Science Congress, Tony Fischer et al. (ed.), BPA Print Group, Melbourne, (4th International Crop Science Congress).

25

Page 26: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Daivis, P. J., Snook, I. K., Matin, M. L., Kairn, T. and McPhie, M., 2004, ‘Computer simulation studies of the rheology of soft condensed matter’, in Proceedings of the 28th Annual Condensed Matter and Materials Meeting, N. Savvides (ed.), Australian Institute of Physics, Melbourne (28th Annual Condensed Matter and Materials Meeting).

Davy, J., 2004, ‘Insulating buildings against transportation noise’, in Proceedings of Acoustics 2004, D. Mees et al. (ed.), Australian Acoustical Society, Darlinghurst, NSW (Annual Conference of the Australian Acoustical Society).

Davy, J., 2004, ‘The radiation efficiency of finite size flat panels’, in Proceedings of Acoustics 2004, D. Mees et al. (ed.), Australian Acoustical Society, Darlinghurst, NSW (Annual Conference of the Australian Acoustical Society).

Houshyar, S., Shanks, R. A. and Hodzic, A., 2004, ‘Effect of fibre-orientation on mechanical properties of polypropylene composites’, in Composites Technologies for 2020, L. Ye et al. (ed.), University of Sydney, Sydney (Fourth Asian-Australian Conference on Composite Materials).

Houshyar, S., Shanks, R. A. and Hodzic, A., 2004, ‘Interfacial properties of polypropylene fibre-matrix composites’, in Composites Technologies for 2020, L. Ye et al. (ed.), University of Sydney, Sydney (Fourth Asian-Australian Conference on Composite Materials).

Martin, S., Bryant, G. and van Megen, W. J., 2004, ‘Crystallization in polydisperse binary colloidal suspensions’, in Proceedings of the 28th Annual Condensed Matter and Materials Meeting, N. Savvides et al. (ed.), Australian Institute of Physics, Melbourne (28th Annual Condensed Matter and Materials Meeting).

May, B. and Pannan, L., 2004, ‘Online discussion drives student-directed laboratory classes’, in Proceedings of the International Conference on Computers in Education 2004, E. McKay (ed.), Common Ground Publishing, Melbourne (International Conference on Computers in Education).

Perera, C., Setunge, S., Patnaikuni, I., Bhargava, S. and Akolekar, D., 2004, An experimental study of autogenous shrinkage of high-strength concrete, Proceedings of the First International Conference of Asian Concrete Federation, Thai Concrete Association, Chiang Mai, Thailand (First International Conference of Asian Concrete Federation).

Perre, P. and May, B., 2004, ‘Existence of a first drying stage for potato proved by two independent experimental evidences’, in Proceedings of 14th International Drying Symposium, M. A. Silva and S. C. S. Rocha (ed.), State University of Campinas, Brazil (14th International Drying Symposium).

Prasad, J., Tardio, J., Akolekar, D. B., Bhargava, S. K. and Grocott, S. C., 2004, ‘Kinetics of the catalytic wet oxidation of stripped sour water from an oil-shale refining process’, in Proceedings of 32rd Australasian Chemical Engineering Conference, A. A. Adesina (ed.), CHEMECA, Sydney (32nd Austrasian Chemical Engineering Conference).

Prasad, J., Tardio, J., Bhargava, S. K., Akolekar, D. B. and Grocott, S. C., 2004, ‘Removal of homogeneous copper catalyst from catalytically wet oxidised stripped sour water by activated carbon’, in Proceedings of 32rd Australasian Chemical Engineering Conference, A. A. Adesina (ed.), CHEMECA, Sydney (32nd Australasian Chemical Engineering Conference).

26

Page 27: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Prasad, J., Tardio, J., Bhargava, S. K., Akolekar, D. B. and Grocott, S. C., 2004, ‘The wet peroxide oxidation of stripped sour water from an oil-shale refining process’, in Proceedings of 32nd Australasian Chemical Engineering Conference, A. A. Adesina (ed.), CHEMECA, Sydney, (32nd Australasian Chemical Engineering Conference).

Subasinghe, N. D., Akolekar, D. B. and Bhargava, S. K., 2004, ‘In-situ hot-stage XRD analyses of oil shale under different environmental conditions’, in Proceedings of 32nd Australasian Chemical Engineering Conference, A. A. Adesina (ed.), CHEMECA, Sydney (32nd Australasian Chemical Engineering Conference).

Webb, B., Nash, D., Hannah, M., Adeloju, S., Toifl, M. C., Roddick, F. A. and Porter, N. A., 2004, ‘Phosphorus between soil, soil water and overland flow for established and laser graded, border-check irrigation systems’, in Supersoil 2004: Proceedings of the Third Australian New Zealand Soils Conference, B. Singh (ed.), Regional Institute, Sydney (Third Australian New Zealand Soil Conference).

Civil and Chemical Engineering

Book Chapters Hadgraft, R., Muir, P., Jollands, M. C., Goricanec, J. L., Brown, A. and Bunting, A., 2004, ‘Shifting the ground - Sustainable engineering at RMIT’, in Protecting the Future: stories of sustainability from RMIT University, CSIRO Publishing, Melbourne, pp. 13-51, ISBN 0-643-090657.

Horan, E., 2004, ‘Queen Victoria Market - Communicating sustainable design solutions about rubbish’, in Protecting the Future: Stories of Sustainability from RMIT University, CSIRO Publishing, Melbourne, pp. 15-29, ISBN 0643-090657.

Piyatrapoomi, A., Kumar, A. and Setunge, S., 2004, ‘Framework for investment decision making’, in Economic Impacts of Intelligent Transportation Systems, Elsevier, Oxford, pp. 199-214, ISBN 0-7623-0978-4.

Journal Articles Buchanan, W., Roddick, F. A., Porter, N. A. and Drikas, M., 2004, ‘Enhanced biodegradability of UV and VUV pre-treated natural organic matter’, in Water Science and Technology: Water Supply, IWA Publishing, UK, vol. 4, pp. 103-111, 4, ISSN 1606-9749.

Chaudhary, D. S. and Jollands, M. C., 2004, ‘Characterization studies of rice hull ash’, in Journal of Applied Polymer Science, Wiley Interscience, New York, vol. 93, pp. 1-8, ISSN 0021-8995.

Chaudhary, D. S., Jollands, M. C. and Cser, F., 2004, ‘Crystallinity of polypropylene-silica ash composites affected by the mixing conditions - DSC studies’, in Polymer and Polymer Composites, Rapra, UK, vol. 12, pp. 383-398, ISSN 0967-3911.

Chaudhary, D. S., Jollands, M. C. and Cser, F., 2004, ‘Recycling rice hull ash: Another filler materials for polymer composites?’, in Advances in Polymer Technology, Wiley Interscience, New York, vol. 23, pp. 147-155, ISSN 0730-6679.

27

Page 28: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Duan, W., Roddick, F. A., Higgins, V. and Rogers, P. J., 2004, ‘A parallel analysis of H(2)S and SO(2) formation by brewing yeast in response to sulfur-containing amino acids and ammonium ions’, in Journal of the American Society of Brewing Chemists, American Society of Brewing Chemists, USA, vol. 62, pp. 35-41, ISSN 0361-0470.

Fahey, N., Swinbourne, D. R., Yan, S. and Osborne, J. M., 2004, ‘The solubility of Cr2O3 in calcium ferrite slags at 1573 K’, in Metallurgical and Materials Transactions B, Minerals, Metals, Materials Society, Warrendale, USA, vol. 35B, pp. 197-202, ISSN 1073-5615.

Ivanov, I., Muke, S., Kao, N. and Bhattacharya, S. N., 2004, ‘Extensional rheology of polypropylene in relation of processing characteristics’, in International Polymer Processing Journal, Hanser Publishers, Munich, vol. 19, pp. 40-46, ISSN 0930-777X.

Kamphausen, A. and O'Donnell, J., 2004, ‘Plant-model mismatch analysis in deethyleniser simulation’, in Industrial and Engineering Chemistry Research, American Chemical Society, USA, vol. 43, pp. 6680-6693, ISSN 0888-5885.

Kamphausen, A. and O'Donnell, J., 2004, ‘Plant-model mismatch analysis in deethyleniser simulation. 2. Application to data-model selection and tuning’, in Industrial and Engineering Chemistry Research, American Chemical Society, USA, vol. 43, pp. 7888-7899, ISSN 0888-5885.

Kavuri, P., Ward, L. P., Brack, N., Pigram, P., Evans, P. J., Noorman, J. and Manory, R. R., 2004, ‘Wear behaviour of CrN coatings MEVVA ion implanted with Zr’, in Wear, Elsevier Science, Oxford, vol. 257, pp. 901-908, ISSN 0043-1648.

Kita, E., Toyoda, T., Tamaki, T. and Xie, M., 2004, ‘Application of cellular automata simulation to truss structure design’, in Computer Assisted Mechanics and Engineering Sciences, Polish Academy of Sciences, Poland, vol. 11, pp. 321-335, ISSN 1232-308X.

Li, Q., Steven, G., Xie, M. and Querin, O., 2004, ‘Evolutionary topology optimization for temperature reduction of heat conducting fields’, in International Journal of Heat and Mass Transfer, Elsevier, Rotterdam, The Netherlands, vol. 47, pp. 5071-5083, ISSN 0017-9310.

Lokuge, W. P., Sanjayan, J. and Setunge, S., 2004, ‘Constitutive model for confined high-strength concrete subjected to cyclic loads’, in ASCE Journal of Materials in Civil Engineering, ASCE, USA, vol. 16, pp. 289-390, 4, ISSN 0899-1561.

Majumdar, J., Cser, F., Jollands, M. C. and Shanks, R. A., 2004, ‘Thermal properties of polypropylene post-consumer waste (PP PCW)’, in Journal of Thermal Analysis and Calorimetry, Kluwer Academic, Dordrecht, vol. 78, pp. 849-863, ISSN 1388-6150.

Parkinson, A. and Roddick, F. A., 2004, ‘Wastewater treatment effectiveness: A review’, in Water - Journal of the Australian Water Association, Australian Water Association, Sydney, vol. 31, pp. 63-68, ISSN 0310-0367.

Piyatrapoomi, A., Kumar, A. and Setunge, S., 2004, ‘Framework for investment decision-making under risk and uncertainty for infrastructure asset management'’, in Research in Transportation Economics, JAI Press, USA, vol. 8, pp. 199-214, ISSN 0739-8859.

28

Page 29: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Prasad, R., Pasanovic-Zujo, V., Gupta, R., Cser, F. and Bhattacharya, S. N., 2004, ‘Morphology of EVA based nanocomposites under shear and extensional flow’, in Polymer Engineering and Science, Wiley Interscience, Hoboken, NJ, vol. 44, pp. 1220-1230, ISSN 0032-3888.

Rojek, K., Roddick, F. A. and Parkinson, A., 2004, ‘Decolorisation of natural organic matter by phanerochaete chrysosporium: The effect of environmental conditions’, in Water Science and Technology: Water Supply, IWA Publishing, UK, vol. 4, pp. 175-182, ISSN 1606-9749.

Smith, J. V., 2004, ‘Determining the size and shape of blocks from linear sampling of geotechnical rock mass classification and assessment’, in Journal of Structural Geology, Elsevier, Netherlands, vol. 26, pp. 1317-1339, ISSN 0191-8141.

Thomson, J., Parkinson, A. and Roddick F. A., 2004, Depolymerization of chromophoric natural organic matter, in Environmental Science and Technology, American Chemical Society, USA, vol. 38, pp. 3360-3369, ISSN 1520-5851.

Thomson, J., Roddick, F. A. and Drikas, M., 2004, ‘Vacuum ultraviolet irradiation for natural organic matter removal’, in Journal of Water Supply, IWA Publishing, UK, vol. 53, pp. 193-206, ISSN 0003-7214.

Vanderstaay, E., Swinbourne, D. R. and Monteiro, M., 2004, ‘A computational thermodynamics model of submerged are electric furnace ferromanganese smelting’, in Mineral Processing and Extractive Metallurgy, Maney Publishing, Leeds, UK, vol. 113, pp. 38-44, ISSN 0371-9553.

Conference Publications Brumley, J. C., 2004, ‘Optimising sustainable use of groundwater: A challenge for science and water markets’, in Sustainability Engineering and Science, C. Boyle (ed.), New Zealand Society for Sustainability Engineering and Science, Auckland (International Conference on Sustainability Engineering and Science).

Burry, J., Tang, J., Burry, M. C., Xie, M. and Peter, F., 2004, ‘Dynamical structural modelling: A collaborative design exploration’, in Architecture in the Network Society, B. Ruddiger et al. (ed.) eCAADe, Copenhagen (Education and Research in Computer Aided Architectural Design in Europe).

Bushnaq, Z., Othman, M. Z. and Roddick, F. A., 2004, ‘Evaluation of UVA, UVB and UVC photolysis for the removal of atrazine from polluted water’, in Enviro 04 Proceedings, P. Nadebaun (ed.), Australian Water Association, Sydney (Enviro 04 Convention and Exhibition).

Daver, F., Awaja, F., Kosior, E. I., Gupta, R. and Cser, F., 2004, ‘Characterisation of reactive extruded recycled poly(ethylene terphthalate)’, in ANTEC 2004 Plastics: Annual Technical Conference, R. T. Newman (ed.), Society of Plastics Engineers, USA (ANTEC 2004).

De Silva, S. P., 2004, ‘Comparative study - health research on traffic noise pollution vs. technical reserch on traffic noise mitigation’, in IABSE Symposium Shanghai 2004, Y. Ge (ed.), International Association for Bridge and Structural Engineering, Shanghai (Metropolitan Habitats and Infrastructure).

De Silva, S. P., 2004, ‘Defining boundaries of PBL in the context of engineering education’, in Proceedings of the 15th Annual Conference for Australasian Association for Engineering

29

Page 30: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Education and the 10th Australasian Women in Engineering Forum, C. Snook and D. Thorpe (ed.), University of Southern Queensland, Toowoomba (15th Annual Conference for Australasian Association for Engineering Education and the 10th Australasian Women in Engineering Forum - Creating Flexible Learning Environments).

De Silva, S. P., 2004, ‘Untutored minds and learning in engineering’, in Proceedings of the 15th Annual Conference for Australasian Association for Engineering Education and the 10th Australasian Women in Engineering Forum, C. Snook and D. Thorpe (ed.), University of Southern Queensland, Toowoomba (15th Annual Conference for Australasian Association for Engineering Education and the 10th Australasian Women in Engineering Forum - Creating Flexible Learning Environments.

De Silva, S. P., Douglas, P., Li, C. and Peters, J., 2004, ‘Creating a proactive decision support environment in managing road traffic noise’, in Proceeding of Clients Driving Innovation International Conference 2004, K. Hampson (ed.), CRC for Construction Innovation, Brisbane (Clients Driving Innovation International Conference).

Douglas, P., De Silva, S. P., Li, C. and Peters, J., 2004, ‘A case study on cost/benefit assessment of road trafic noise amelioration within and outside the road reserve’, in Proceedings of the Annual Conference of the Australian Acoustical Society, D. J. Mee, Robert et al. (ed.), Australian Acoustical Society, Darlinghurst (Annual Conference of the Australian Acoustical Society - Transportation Noise and Vibration - The New Millennium).

Gato, S., Jayasuriya, N., Roberts, P. and Hadgraft, R., 2004, ‘Understanding residential water use’, in Enviro 04, P. Howlett (ed.), Enviroaust Convention Limited, Willoughby, Sydney (Enviro 04).

Goldsmith, M., Rogers, P. J. and Roddick, F. A., 2004, ‘Reducing waste generation in beer production by the use of activated carbon’, in Sustainable Processes - Proceedings of the 32nd Australasian Chemical Engineering Conference, P. Le-Clech et al. (ed.), Institution of Chemical Engineers, Sydney (32nd Australasian Chemical Engineering Conference).

Gupta, R., Prasad, R. and Bhattacharya, S. N., 2004, ‘Use of clay based nanocomposites of ethylene-vinyl acetate co-polymer (EVA) for packaging application’, in Sustainable Processes - Proceedings of the 32nd Australasian Chemical Engineering Conference, C. Barner-Kowollik (ed.), Institution of Chemical Engineers, Sydney (32nd Australasian Chemical Engineering Conference).

Gupta, R., Tung, J., Bhattacharya, S. N., Simon, G. and Edwards, G., 2004, ‘Rheology and mechanical property of nylon 6-organoclay nanocomposites’, in Polymer Processing Conference (PPS-20), J. L. White et al. (ed.), University of Akron, Ohio (Polymer Processing Conference).

Hadgraft, R. and Goricanec, J. L., 2004, ‘Future engineering - Evolution or revolution?’, in 15th Annual Conference for the Australasian Association for Engineering Education C. Snook and D. Thorpe (ed.), University of Southern Queensland, Toowoomba (15th Annual Conference for the Australasian Association for Engineering Education - Creating Flexible Learning Environments).

Hadgraft, R., Xie, M. and Angeles, N. H., 2004, ‘Civil and infrastructure engineering for sustainability’, in Engineering Education reaches New Heights, T. Pierce et al. (ed.), American Society for Engineering Education, Salt Lake City (2004 ASEE Annual Conference and Exposition).

30

Page 31: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Harris, J. L., Malek, F., Daley, M. and Roddick, F. A., 2004, ‘Investigation of pretreatment strategies for flux improvement in the microfiltration of drinking water’, in Proceedings of Enviro 04, P. Nadebaum (ed.), Australian Water Association, Sydney (Enviro 04 Convention and Exhibition).

Khanna, N., Waters, M. T., Smith, J. V. and Lech, M., 2004, ‘Determination of temporal changes in the relationship between the chlorophyll level and the water quality parameters using an artifical neural network’, in Eighth Annual Environmental Research Conference., L. Nghiem et al. (ed.), University of Wollongong Press, Wollongong (Eighth Annual Environmental Research Conference - Environmental Change: Make It Happen).

Li, C., Douglas, P., De Silva, S. P. and Peters, J., 2004, ‘Evaluation of noise amelioration treatments within and outside the road reserve’, in Proceedings of the Annual Conference of the Australian Acoustical Society, D. J. Mee et al. (ed.), Australian Acoustical Society, Darlinghurst (Annual Conference of the Australian Acoustical Society - Transportation Noise and Vibration - The New Millennium).

Mainville, D. M. and Brumley, J. C., 2004, ‘The sustainability of land uses in the Strzelecki Ranges in Victoria, Australia’, in Sustainability Engineering and Science, C. Boyle (ed.), New Zealand Society for Sustainability Engineering and Science, Auckland (International Conference on Sustainability Engineering).

Malek, F., Harris, J. L. and Roddick, F. A., 2004, ‘Photooxidative pretreatment of water for flux improvement in the microfiltration’, in Proceedings of 32nd Australasian Chemical Engineering Conference, V. Gomes (ed.), Institution of Chemical Engineers, Sydney (32nd Australasian Chemical Engineering Conference - Sustainable Processes)

Navaratne, C., Weerasinghe, K. D. and Jayasuriya, N., 2004, ‘Rainwater harvesting and roof runoff coefficients’, in Proceedings of the International Conference on Sustainable Water Resources Management in the Changing Enviroment of the Monsoon Region, S. Herath et al. (ed.), National Water Resources Secretariat, Colombo (International Conference on Sustainable Water Resources Management).

Nezamian, A. and Setunge, S., 2004, ‘Comparison between ACI 440 and FIB 14 design guidelines in using CFRP for strengthening of a concrete bridge headstock’, in Advance Composite Materials in Bridges Structures, M. El-Badry and L. Dunaszegi (ed.), Canadian Society of Civil Engineering, Montreal (Fourth International Conference on Advance Composite Materials in Bridges and Structures).

Nezamian, A. and Setunge, S., 2004, ‘Development of a user friendly guide for rehabilitation or strengthening of bridge structures using fiber reinforced polymer composites’, in Proceedings of Clients Driving Innovation International Conference 2004, K. Hampson (ed.), CRC for Construction Innovation, Brisbane (Clients Driving Innovation International Conference 2004).

Nezamian, A., Setunge, S. and Carse, A., 2004, ‘Effect of environmental conditions of degradation and lifetime performance of reinforded concrete piers strengthened using fiber reinforced polymer composites’, in Proceedings of the First International Conference of Asian Concrete Federation, S. Tangtermisirikul et al. (ed.), Thai Concrete Associations, Chiang Mai, Thailand (First International Conference of Asian Concrete Federation).

31

Page 32: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Nezamian, A., Setunge, S., Kumar, A. and Fenwick, J., 2004, ‘Decision support in using fibre reinforced polymer (FRP) composites in rehabilitation of concrete bridge structures’, in Proceedings of the First International Conference on Innovative Materials and Technologies for Construction and Restoration, A. La Tegola and A. Nanni, Liguori (ed.), Napoli (First International Conference on Innovative Materials and Technologies for Construction and Restoration).

Nezamian, A., Setunge, S., Lokuge, W. P. and Fenwick, J., 2004, ‘Reliability based optimal solution for rehabilitation of existing bridge structures’, in Proceedings of Clients Driving Innovation International Conference, K. Hampson (ed.), CRC for Construction Innovation, Brisbane (Clients Driving Innovation International Conference).

O'Donnell, J. and Kurt, N., 2004, ‘Review of channelling in batch sedimentation’, in Proceedings of 32nd Australasian Chemical Engineering Conference, Y.-K. Leong et al. (ed.), Institute of Chemical Engineers, Sydney (32nd Australasian Chemical Engineering Conference - Sustainable Processes)

Parkinson, A. and Roddick, F. A., 2004, ‘The effectiveness of water treatment unit operations in pathogen reduction’, in Proceedings of Enviro 04, P. Nadebaun (ed.), Australian Water Association, Sydney (Enviro 04 Convention and Exhibition).

Pasanovic-Zujo, V., Gupta, R. and Bhattacharya, S. N., 2004, ‘Effect of temperature on extensional rheology of EVA/clay nanocomposites’, in Polymer Processing Conference (PPS-20), J. L. White et al. (ed.), University of Akron (Polymer Processing Conference).

Patnaikuni, I., 2004, ‘Quality control of high strength high performance concrete’, in Proceeings of International Conference on Advances in Concrete and Construction 2004, J. Rao et al. (ed.), Allied Publishers, New Delhi (International Conference on Advances in Concrete and Construction).

Perera, C., Setunge, S., Patnaikuni, I., Bhargava, S. and Akolekar, D., 2004, An experimental study of autogenous shrinkage of high-strength concrete, Proceedings of the First International Conference of Asian Concrete Federation, Thai Concrete Association, Chiang Mai, Thailand (First International Conference of Asian Concrete Federation).

Prasad, R., Gupta, R., Cser, F. and Bhattacharya, S. N., 2004, ‘Rheology and morphology of EVA based nanocomposites’, in Polymer Processing Conference, J. L. White et al. (ed.), University of Akron (Polymer processing Conference).

Raha, S., Kao, N. and Bhattacharya, S. N., 2004, ‘The effect of temperature on the rheology of PS/SEBS blends’, in Materials Processing for Properties and Performance, K. A. Khor et al. (ed.), Institute of Materials (East Asia), Singapore (Third International Conference on Materials Processing for Properties and Performance).

Rahman, S. S., Molyneaux, T. and Patnaikuni, I., 2004, ‘Compressive strength of modified reactive powder concrete’, in Proceedings of International Conference on Advances in Concrete and Construction, P. J. Rao et al. (ed.), Allied Publishers, New Delhi (International Conference on Advances in Concrete and Construction).

Rajapakse, A., Parthasarathy, R. and Bhattacharya, S. N., 2004, ‘Effect of dispersed phase volume fraction on drop size distribution in a stirred reactor’, in 32nd Australasian Chemical

32

Page 33: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Engineering Conference, M. Dureau et al., University of Sydney, Sydney (32nd Australasian Chemical Engineering Conference - Sustainable Process).

Sanjayan, J. and Patnaikuni, I., 2004, ‘Use of fly ash in concrete: Australian perspective’, in Proceedings of NSF sponsored US-India Workshop, A. Patnaik et al. (ed.), Department of Civil and Environmental Engineering, South Dakota (NSF sponsored US-India Workshop).

Smith, J. V., 2004, ‘A method for evaluating the complex anisotropy of strength and deformation modulus of discontinuous rock masses’, in Contribution of Rock Mechanics to the New Century, Y. Ohnishi and K. Aoki (ed.), Millpress, Netherlands (Third Asian Rock Mechanics Symposium).

Stephen, C., Khan, A., O'Shea, M. and Bhattacharya, S. N., 2004, ‘Bubble growth modelling in foam extrusion process’, in Polymer Processing Conference (PPS-20), J. L. White et al.. (ed.) University of Akron, Akron (Polymer Processing Conference).

Sullivan, C. M., Waters, M. T. and Roddick, F. A., 2004, ‘Heavy metals deposition in a wetland receiving urban stormwater runoff’, in Proceedings of Enviro 0, P. Nadebaun (ed.), Australian Water Association, Sydney (Enviro 04 Convention and Exhibition).

Tang, J., Xie, M. and Felicetti, P., 2004, ‘Form finding for compression-only or tension-only structures’, in IABSE Symposium Shanghai 2004, Y. Ge (ed.), International Association for Bridge and Structural Engineering, Shanghai (IABSE Symposium - Metropolitan Habitats and Infrastructure).

Ting, S. K. and De Silva, S. P., 2004, ‘Optimisation of embodied energy in domestic construction’, in IABSE Symposium Shanghai 2004, Y. Ge (ed.), International association for Bridge and Structural Engineering, Shanghai ( IABSE Symposium - Metropolitan Habitats and Infrastructure).

Tung, J., Gupta, R., Simon, G. and Edwards, G., 2004, ‘Weld lines behaviour in melt blended and in situ polymerised nylon 6 nanocomposites’, in ANTEC 2004 Plastics: Annual Technical Conference, R. T. Newman (ed.), Society of Plastics Engineers, USA (Annual Technical conference).

Webb, B., Nash, D., Hannah, M., Adeloju, S., Toifl, M. C., Roddick, F. A. and Porter, N. A., 2004, ‘Phosphorus between soil, soil water and overland flow for established and laser graded, border-check irrigation systems’, in Supersoil 2004: Proceedings of the Third Australian New Zealand Soils Conference, B. Singh (ed.), Regional Institute, Sydney (Third Australian New Zealand Soil Conference).

Wong, C. Y. and De Silva, S. P., 2004, ‘Time series modelling of high performance concrete column shortening due to creep and shrinkage’, in IABSE Symposium Shanghai 2004, Y. Ge (ed.), International Association for Bridge and Structural Engineering, Shanghai ( IABSE Symposium - Metropolitan Habitats and Infrastructure).

Young, D., Goricanec, J. L. and Hadgraft, R., 2004, ‘Embedding continuous cycles of research and innovation into our practice’, in International Conference on Innovation, Good Practice and Research in Engineering Education, A. Halstead and P. Lister (ed.), University of Wolverhampton, Wolverhampton (International Conference on Innovation, Good Practice and Research in Engineering Education).

33

Page 34: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Computer Science and Information Technology

Book Padgham, L. and Winikoff, M. D., 2004, ‘Developing Intelligent Agent Systems: A Practical Guide', John Wiley, Chicester, UK, ISBN 0-470-86120-7.

Book Chapters Li, X. and Sutherland, S., 2004, ‘A real-coded cellular genetic algorithm inspired by predator-prey interactions’, in Recent advances in Simulated Evolution and Learning: Advances in Natural Computation - Vol. 2, World Scientific Publishing, Singapore, pp. 191-207, ISBN 981-238-952-0.

Riley, J. A. and Ciesielski, V., 2004, ‘Evolution of fuzzy rule based controllers for dynamic environments’, in Recent Advances in Simulated Evolution and Learning: Advances in Natural Computation - Vol. 2, World Scientific Publishing, Singapore, pp. 426-445, ISBN 981-238-952-0.

Winikoff, M. D. and Padgham, L., 2004, ‘The Prometheus methodology’, in Methodologies and Software Engineering for Agent Systems, Kluwer Academic Publishers, Boston, pp. 217-234, ISBN 1-4020-8057-3.

Journal Articles Cameron, M. M., Williams, H. E. and Cannane, A., 2004, ‘Improved gapped alignment in BLAST’, in IEEE/ACM Transactions on Computational Biology and Bioinformatics, Institute of Electrical and Electronics Engineers, USA, vol. 1, pp. 116-129, ISSN 1545-5963.

D'Souza, D. J., Thom, J. A. and Zobel, J., 2004, ‘Collection selection for managed distributed document databases’, in Information Processing and Management, Pergamon-Elsevier Science, UK, vol. 40, pp. 527-546, ISSN 0306-4573.

Harland, J. A. and Winikoff, M. D., 2004, ‘Agents via mixed-mode computation in linear logic’, in Annals of Mathematics and Artificial Intelligence, Kluwer Academic Publishers, The Netherlands, vol. 42, pp. 167-196, ISSN 1012-2443.

Howell, S., Harris, M. C., Wilkinson, S., Zuluaga, C. and Voutier, P., 2004, ‘Teaching mixed-mode: A case study in remote delivery of computer science in Africa’, in Educational Media International, Routledge, UK, vol. 41, pp. 297-306, ISSN 0952-3987.

Malhotra, M. and Tari, Z., 2004, ‘MIDAS: An integrated e-commerce solution for Australian transport industries’, in International Journal of Web Engineering and Technology, Interscience Publishers, UK, vol. 1, pp. 353-373, ISSN 1476-1289.

Scholer, F., Williams, H. E. and Turpin, A., 2004, ‘Query association surrogates for Web search’, in Journal of the American Society for Information Science and Technology, John Wiley, USA, vol. 55, pp. 637-650, ISSN 1532-2882.

Schroder, H., Sykora, O. and Vi'to, I., 2004, ‘Cyclic cutwidths of the two-dimensional ordinary and cylindrical meshes’, in Discrete Applied Mathematics, Elsevier, Amsterdam, vol. 143, pp. 123-129, ISSN 0166-218X.

34

Page 35: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Sim, L., Schroder, H. and Leedham, G., 2004, ‘Major line removal morphological hough transform on a hybrid system’, in Journal of Parallel and Distributed Computing, Academic Press, USA, vol. 64, pp. 1060-1068, ISSN 0743-7315.

Sinha, R. and Zobel, J., 2004, ‘Cache-conscious sorting of large sets of strings with dynamic tries’, in Journal of Experimental Algorithmics, Association for Computing Machinery, USA, vol. 9, pp. 1-31, ISSN 1084-6654.

Uitdenbogerd, A. L. and Zobel, J., 2004, ‘An architecture for effective music information retrieval’, in Journal of the American Society for Information Science and Technology, John Wiley, USA, vol. 55, pp. 1053-1057, ISSN 1532-2882.

Williams, H. E., Zobel, J. and Bahle, D., 2004, ‘Fast phase querying with combined indexes’, in ACM Transaction on Information Systems, Association for Computing Machinery, USA, vol. 22, pp. 573-594, ISSN 1046-8188.

Zhang, H. and Jarzabek, S., 2004, ‘XVCL: A mechanism for handling variants in software product lines’, in Science of Computer Programming, Elsevier, Amsterdam, vol. 53, pp. 381-407, ISSN 0167-6423.

Zhang, M. and Ciesielski, V., 2004, ‘Neural networks and genetic algorithms for domain independent multiclass object detection’, in International Journal of Computational Intelligence and Applications, Imperial College Press, UK, vol. 4, pp. 77-108, ISSN 1469-0268.

Conference Publications Asian, J., Williams, H. E. and Tahaghoghi, S., 2004, ‘A testbed for Indonesian text retrieval’, in Proceedings of the Ninth Australasian Document Computing Symposium, P. Bruza et al. (ed.), University of Melbourne, Melbourne (Ninth Australasian Document Computing Symposium).

Bajurnow, A. and Ciesielski, V., 2004, ‘Layered learning for evolving goal scoring behavior in soccer players’, in Proceedings of the 2004 Congress on Evolutionary Computation, G. W. Greenwood (ed.), IEEE, Piscataway (2004 Congress on Evolutionary Computation).

Barrow, R. J., Frampton, K. M., Hamilton, M. and Crossman, B., 2004, ‘How do experienced architects use architecture development methods?’, in Proceedings of the 15th Australasian Conference on Information Systems, S. Elliot et al. (ed.), University of Tasmania, Hobart (15th Australasian Conference on Information Systems).

Beckett, P. L., Brown, A., Hamilton, M. and Richardson, J., 2004, ‘A case for re-articulating areas of information technology to provide a Masters program in information and communication technologies’, in International Conference on Computers in Education 2004: A conference of the Asia-Pacific Society for Computers in Education (APSCE) - Full proceedings, E. McKay (ed.), Common Ground Publishing, Melbourne (12th International Conference on Computers in Education).

Bernstein, Y. and Zobel, J., 2004, ‘A scalable system for identifying co-derivative documents’, in String Processing and Information Retrieval: 11th International Conference, SPIRE 2004, A. Apostolico and M. Melucci (ed.), Springer, Berlin (11th International Conference on String Processing and Information Retrieval).

35

Page 36: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Bernstein, Y., Li, X., Ciesielski, V. and Song, A., 2004, ‘Multiobjective parsimony enforcement for superior generalisation performance’, in Proceedings of the 2004 Congress on Evolutionary Computation, G. W. Greenwood (ed.), IEEE, Piscataway (2004 Congress on Evolutionary Computation).

Billerbeck, B. and Zobel, J., 2004, ‘Questioning query expansion: An examination of behaviour and parameters’, in Database Technologies 2004 - Proceedings of the 15th Australasian Database Conference (ADC2004), K. Schewe and H. E. Williams (ed.), Australian Computer Society, Bedford Park (15th Australasian Database Conference).

Billerbeck, B. and Zobel, J., 2004, ‘Techniques for efficient query expansion’, in String Processing and Information Retrieval: 11th International Conference, SPIRE 2004, A. Apostolico and M. Melucci (ed.), Springer, Berlin (11th International Conference on String Processing and Information Retrieval).

Burrows, S., Tahaghoghi, S. and Zobel, J., 2004, ‘Efficient and effective plagiarism detection for large code repositories’, in Proceedings of the Second Australian Undergraduate Students' Computing Conference, G. Abraham and B. I. P. Rubinstein (ed.), AUSCC, Melbourne (Second Australian Undergraduate Students' Computing Conference).

Chakma, L. and Zhang, H., 2004, ‘Evaluating product line technologies: A graph product line case study’, in Proceedings of the Second Australian Undergraduate Students' Computing Conference, G. Abraham and B. I. P. Rubinstein (ed.), AUSCC, Melbourne (Second Australian Undergraduate Students' Computing Conference).

Chattaraj, A. and Williams, H. E., 2004, ‘Variable-length intervals in homology search’, in Bioinformatics 2004 - Proceedings of the Second Asia-Pacific Bioinformatics Conference, Y. P. Chen (ed.), Australian Computer Society, Bedford Park (Second Asia-Pacific Bioinformatics Conference).

Chattaraj, A., Williams, H. E. and Cannane, A., 2004, ‘General-purpose search techniques for genomic text’, in Genome Informatics 2004, T. Akutsu et al. (ed.), Universal Academy Press, Tokyo (15th International Conference on Genome Informatics).

Chou, P. L. and Zhang, X. J., 2004, ‘Computing complex iceberg cubes by multiway aggregation and bounding’, in Data Warehousing and Knowledge Discovery: Sixth International Conference, Y. Kambayashi et al. (ed.), Springer, Berlin (Sixth International Conference on Data Warehousing and Knowledge Discovery).

Ciesielski, V. and Li, X., 2004, ‘Experiments with explicit for-loops in genetic programming’, in Proceedings of the 2004 Congress on Evolutionary Computation, G. W. Greenwood (ed.), IEEE, Piscataway, NJ (2004 Congress on Evolutionary Computation).

Clare, A., Williams, H. E. and Lester, N. M., 2004, ‘Scalable multi-relational association mining’, in Proceedings of the Fourth IEEE International Conference on Data Mining, R. Rastogi et al. (ed.), IEEE, Piscataway,NJ (Fourth IEEE International Conference on Data Mining).

Dayalan, S. and Bevinakoppa, S. G., 2004, ‘Dihedral angle database based on disulfide bonds’, in Proceedings of the Fourth IEEE Symposium on BioInformatics and BioEngineering, P. Sheu (ed.), IEEE, Piscataway, NJ (Fourth IEEE Symposium on BioInformatics and BioEngineering).

36

Page 37: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Dayalan, S., Bevinakoppa, S. G. and Schroder, H., 2004, ‘A dihedral angle database of short sub-sequences for protein structure prediction’, in Bioinformatics 2004 - Proceedings of the Second Asia-Pacific Bioinformatics Conference, Y. P. Chen (ed.), Australian Computer Society, Bedford Park, SA (Second Asia-Pacific Bioinformatics Conference).

De Silva, L. P. and Padgham, L., 2004, ‘A comparison of BDI based real-time reasoning and HTN based planning’, in AI 2004: Advances in Artificial Intelligence, G. Webb and X. Yu (ed.), Springer, Berlin (17th Australian Joint Conference on Artifical Intelligence).

Dimopoulos, P., Zeephongsekul, P. and Tari, Z., 2004, ‘Modeling the burstiness of TCP’, in Proceedings of the 12th IEEE International Symposium on Modelling Analysis and Simulation of Computer and Telecommunication Systems, D. DeGroot and P. Harrison (ed.), IEEE, Los Alamitos, CA, (12th IEEE International Symposium on Modelling Analysis and Simulation of Computer and Telecommunication Systems).

Do, D. and Tam, A., 2004, ‘Formal semantic models for images and image understanding’, in Proceedings of the Fourth Conference on Computation Semiotics, A. Clarke et al. (ed.), University of Split, Croatia (Fourth Conference on Computation Semiotics).

Do, D. and Tam, A., 2004, ‘Querying compound concepts in image collections by applying syntactical constraints and common sense’, in Proceedings of the International Conference on Intelligent Agents, Web Technologies and Internet Commerce, M. Mohammadian (ed.), IAWTIC, Australia, Gold Coast (International Conference on Intelligent Agents, Web Technologies and Internet Commerce).

D'Souza, D. J., Zobel, J. and Thom, J. A., 2004, ‘Is CORI effective? An exploration of parameters, queries, and data’, in Proceedings of the Ninth Australasian Document Computing Symposium, P. Bruza et al. (ed.), University of Melbourne, Melbourne (Ninth Australasian Document Computing Symposium).

Elgedawy, I. M., Tari, Z. and Winikoff, M. D., 2004, ‘Exact functional context matching for web services’, in Proceedings of the Second International Conference on Service Oriented Computing, M. Aiello et al. (ed.), Association for Computing Machinery, New York (Second International Conference on Service-Oriented Computing).

Elgedawy, I. M., Tari, Z. and Winikoff, M. D., 2004, ‘Scenario matching using functional substitutability in web services’, in Web Information Systems - WISE 2004Fifth International Conference on Web Information Systems Engineering, X. Zhou et al. (ed.), Springer, Berlin (Fifth International Conference on Web Information Systems Engineering).

Fernandez, G. and FitzGerald, G., 2004, ‘A bold mathematics course to support a new civil infrastructure program’, in Proceedings of the Ninth Asian Technology Conference in Mathematics, W.-C. Yang et al. (ed.), ATCM, Blacksburg, VA (Ninth Asian Technology Conference in Mathematics).

Fernandez, G. and FitzGerald, G., 2004, ‘Towards an automated web tutor environment’, in International Conference on Computers in Education 2004: A conference of the Asia-Pacific Society for Computers in Education (APSCE), E. McKay (ed.), Common Ground Publishing, Melbourne (12th International Conference on Computers in Education).

Garcia, S., Williams, H. E. and Cannane, A., 2004, ‘Access-ordered indexes’, in Computer

37

Page 38: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Science 2004 - Proceedings of the 27th Australasian Computer Science Conference, V. Estivill-Castro (ed.), Australian Computer Society, Bedford Park, SA (27th Australasian Computer Science Conference).

Gruba, P., Moffat, A. M., Sondergaard, H. and Zobel, J., 2004, ‘What drives curriculum change?’, in Computing Education 2004 - Proceedings of the Sixth Australasian Computing Education Conference, R. Lister and A. L. Young (ed.), Australian Computer Society, Bedford Park, SA (Sixth Australasian Computing Education Conference).

Hamilton, M. and Haywood, E. J., 2004, ‘Learning about software development - Should programming always come first?’, in Computing Education 2004 - Proceedings of the Sixth Australasian Computing Education Conference, R. Lister and A. L. Young (ed.), Australian Computer Society, Bedford Park, SA (Sixth Australasian Computing Education Conference).

Hamilton, M., Tahaghoghi, S. and Walker, C., 2004, ‘Educating students about plagiarism avoidance - A Computer Science perspective’, in International Conference on Computers in Education 2004: A Conference of the Asia-Pacific Society for Computers in Education (APSCE), E. McKay (ed.), Common Ground Publishing, Melbourne (12th International Conference on Computers in Education).

Harland, J. A. and Pym, D., 2004, ‘Proof-theoretic infinitary computations’, in Proceedings of the ICALP-LICS 2004 Workshop on Logic for Resources, Processes and Programs, D. Galmiche et al. (ed.), Inernational Colloquium on Automata, Languages and Programming, Turku, Finland (ICALP-LICS 2004 Workshop on Logic for Resources, Processes and Programs).

Hoang, X. D. and Hu, J., 2004, ‘An efficient hidden Markov model training scheme for anomaly intrusion detection of server applications based on system calls’, in Proceedings of the 12th IEEE International Conference on Networks, H. K. Pung and F. Lee (ed.), IEEE, Piscataway, NJ (12th IEEE International Conference on Networks.

Hu, J. and Eriksson, K., 2004, ‘A new distributed contention control protocol for the IEEE 802.11 MAC layer - Project of the ATCRC application programs’, in Proceedings of the First International Conference on E-Business and Telecommunication Networks, J. Ascenso et al. (ed.), INSTICC, Portugal (First International Conference on E-Business and Telecommunication Networks).

Innes, A. W., Ciesielski, V., Mamutil, J. and John, S. J., 2004, ‘Reducing false alarms using genetic programming in object detection’, in Proceedings of the International Conference on Artificial Intelligence, H. R. Arabnia (ed.), CSREA Press, Las Vegas (2004 International Conference on Artificial Intelligence).

Iorio, A. W. and Li, X., 2004, ‘A cooperative coevolutionary multiobjective algorithm using non-dominated sorting’, in Genetic and Evolutionary Computation - GECCO 2004, K. Deb et al. (ed.), Springer, Berlin (Sixth Annual Genetic and Evolutionary Computation).

Iorio, A. W. and Li, X., 2004, ‘Solving rotated multi-objective optimization problems using differential evolution’, in AI 2004: Advances in Artificial Intelligence, G. Webb and X. Yu (ed.), Springer, Berlin (17th Australian Joint Conference on Artifical Intelligence).

Jarzabek, S., Shen, R., Zhang, H. and Sun, Z., 2004, ‘Analysis of meta-programs: A case study’, in Proceedings of the 16th International Conference on Software Engineering and Knowledge

38

Page 39: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Engineering (SEKE 2004), F. Maurer and G. Ruhe (ed.), Knowledge Systems Institute Graduate School, Skokie, IL (16th International Conference on Software Engineering and Knowledge Engineering).

Jayatilleke, G., Padgham, L. and Winikoff, M. D., 2004, ‘Towards a component-based development framework for agents’, in Multiagent System Technologies: Second German Conference, G. Lindemann et al. (ed.), Springer, Berlin (Second German Conference on Multiagent System Technologies).

Lai, K. Y., Tari, Z. and Bertok, P., 2004, ‘An analytical study of object relocation strategies for wireless environments’, in Proceedings of the Ninth IEEE Symposium on Computer Communications, A. Puliafito and S. Papavassiliou (ed.), IEEE, Piscataway, NJ (Ninth IEEE Symposium on Computer Communications).

Lai, K. Y., Tari, Z. and Bertok, P., 2004, ‘Improving cache performance in mobile computing networks through dynamic object relocation’, in Proceedings of the 10th International Conference on Parallel and Distributed Systems, N. Tzeng (ed.), IEEE, Piscataway, NJ (10th International Conference on Parallel and Distributed Systems).

Lai, K. Y., Tari, Z. and Bertok, P., 2004, ‘Location-aware cache replacement for mobile environments’, in Globecom '04 IEEE Global Telecommunications Conference, K. B. Letaief et al. (ed), IEEE, Piscataway, NJ (2004 IEEE Global Telecommunications Conference).

Lai, K. Y., Tari, Z. and Bertok, P., 2004, ‘Mobility-aware cache replacement for users of location-dependent services’, in Proceedings of the 29th Conference on Local Computer Networks, S. Jha et al. (ed.), IEEE, Piscataway, NJ (29th Conference on Local Computer Networks).

Lam, B. T. and Ciesielski, V., 2004, ‘Discovery of human-competitive image texture feature extraction programs using genetic programming’, in Genetic and Evolutionary Computation - GECCO 2004, K. Deb et al. (ed.), Springer, Berlin (Sixth Annual Genetic and Evolutionary Computation).

Lester, N. M., Zobel, J. and Williams, H. E., 2004, ‘In-place versus re-build versus re-merge: Index maintenance strategies for text retrieval systems’, in Computer Science 2004 - Proceedings of the 27th Australasian Computer Science Conference, V. Estivill-Castro (ed.), Australian Computer Society, Bedford Park, SA (27th Australasian Computer Science Conference).

Li, X., 2004, ‘Adaptively choosing neighbourhood bests using species in a particle swarm optimizer for multimodal function optimization’, in Genetic and Evolutionary Computation - GECCO 2004, K. Deb et al. (ed.), Springer, Berlin (Sixth Annual Genetic and Evolutionary Computation).

Li, X., 2004, ‘Analysis of genetic programming runs’, in Proceedings of the Fourth Asia-Pacific Workshop on Genetic Programming, R. McKay (ed.), Central Queensland University, Rockhampton (Fourth Asia-Pacific Workshop on Genetic Programming).

Li, X., 2004, ‘Better spread and convergence: Particle swarm multiobjective optimization using the maximin fitness function’, in Genetic and Evolutionary Computation - GECCO 2004, K. Deb et al. (ed.), Springer, Berlin ( Sixth Annual Genetic and Evolutionary Computation).

39

Page 40: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Li, X. and Ciesielski, V., 2004, ‘Using loops in genetic programming for a two class binary image classification problem’, in AI 2004: Advances in Artificial Intelligence, G. Webb and X. Yu (ed.), Springer, Berlin (17th Australian Joint Conference on Artifical Intelligence.

Low, C. and Bertok, P., 2004, ‘Fast re-authentification protocols for mobile and wireless networks’, in Proceedings of the Fifth European Wireless Conference: Mobile and Wireless Systems beyond 3G, O. Casals et al. (ed.), Technical University of Catalonia, Barcelona (Fifth European Wireless Conference: Mobile and Wireless Systems beyond 3G).

Lutovac, T. and Harland, J. A., 2004, ‘Detecting loops during proof search in propositional affine logic’, in Proceedings of the ICALP-LICS 2004 Workshop on Logic for Resources, Processes and Programs, D. Galmiche et al. (ed.), International Colloquium on Automata, Languages and Programming, Turku, Finland (ICALP-LICS 2004 Workshop on Logic for Resources, Processes and Programs).

Mathieson, I., Dance, S., Padgham, L., Gorman, M. and Winikoff, M. D., 2004, ‘An open meteorological alerting system: Issues and solutions’, in Computer Science 2004 - Proceedings of the 27th Australasian Computer Science Conference, V. Estivill-Castro (ed.), Australian Computer Society, Bedford Park, SA (27th Australasian Computer Science Conference).

Mitri, G., Uitdenbogerd, A. L. and Ciesielski, V., 2004, ‘Automatic music classification problems’, in Computer Science 2004 - Proceedings of the 27th Australasian Computer Science Conference, V. Estivill-Castro (ed.), Australian Computer Society, Bedford Park, SA (27th Australasian Computer Science Conference).

Moffat, A. M. and Zobel, J., 2004, ‘What does it mean to "measure performance"?’, in Web Information Systems - WISE 2004:Fifth International Conference on Web Information Systems Engineering, X. Zhou et al. (ed.), Springer, Berlin (Fifth International Conference on Web Information Systems Engineering).

Morris, E. and Zuluaga, C., 2004, ‘An evaluation of IT courses delivered via a range of mixed modes’, in Beyond the Comfort Zone: Proceedings of the 21st Annual Conference of the Australasian Society for Computers in Learning in Tertiary Education (, R. Atkinson et al. (ed.), ASCILITE, Perth (21st Annual Conference of the Australasian Society for Computers in Learning in Tertiary Education).

Pang, C., Taylor, K., Zhang, X. J. and Cameron, M., 2004, ‘Generating multidimensional schemata from relational aggregation queries’, in Web Information Systems - WISE 2004Fifth International Conference on Web Information Systems Engineering, X. Zhou et al. (ed.), Springer, Berlin (Fifth International Conference on Web Information Systems Engineering).

Pannan, L., van der Craats, C., Zuluaga, C. and Barnes, D., 2004, ‘Extending the academic comfort zone: Smooth transition from content rich linear courseware to problem based learning online’, in Beyond the Comfort Zone: Proceedings of the 21st Annual Conference of the Australasian Society for Computers in Learning in Tertiary Education, R. Atkinson et al (ed.), ASCILITE, Perth (ASCILITE 2004).

Parrott, D. and Li, X., 2004, ‘A particle swarm model for tracking multiple peaks in a dynamic environment using speciation’, in Proceedings of the 2004 Congress on Evolutionary Computation, G. W. Greenwood (ed.), IEEE, Piscataway, NJ (2004 Congress on Evolutionary Computation).

40

Page 41: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Pearce, C. W., Bertok, P. and Thevathayan, C., 2004, ‘A protocol for secrecy and authentification within proxy-based SPKI/SDSI mobile networks’, in Proceedings of the AusCERT Asia Pacific Information Technology Security Conference, A. Clark et al. (ed.), AusCERT, Australia (AusCERT Asia Pacific Information Technology Security Conference).

Pearce, C. W., Ma, V. Y. and Bertok, P., 2004, ‘A secure communication protocol for ad-hoc wireless sensor networks’, in Proceedings of the 2004 Intelligent Sensors, Sensor Networks and Information Processing Conference, M. Palaniswami et al. (ed.), IEEE, Piscataway, NJ (2004 Intelligent Sensors, Sensor Networks and Information Processing Conference).

Peerbocus, M. S. and Tari, Z., 2004, ‘A workflow-based dynamic scheduling approach for web services platforms’, in Proceedings of the Ninth IEEE Symposium on Computers Communications, A. Puliafito and S. Papavassiliou (ed.), IEEE, Piscataway, NJ (Ninth IEEE Symposium on Computers Commuications).

Pehcevski, J., Thom, J. A. and Vercoustre, A-M., 2004, ‘Enhancing content-and-structure information retrieval using a native XML database’, in Proceedings of the First Twente Data Management Workshop on XML Databases and Information Retrieval, V. Mihajloviæ and D. Hiemstra (ed.), University of Twente, The Netherlands (First Twente Data Management Workshop on XML Databases and Information Retrieval).

Phillips, D. and Hu, J., 2004, ‘Analytic models for high speed TCP fairness analysis’, in Proceedings of the 12th IEEE International Conference on Networks (ICON 2004), H. K. Pung and F. Lee (ed.), IEEE, Piscataway, NJ (12th IEEE International Conference on Networks).

Phinjaroenphan, P. and Bevinakoppa, S. G., 2004, ‘A novel algorithm for mapping parallel applications in computational grid environments’, in Proceedings of the Seventh International Conference on High Performance Computing and Grid in Asia Pacific Region, M. Sato (ed.), IEEE, Piscataway, NJ (Seventh International Conference on High Performance Computing and Grid in Asia Pacific Region).

Phinjaroenphan, P. and Bevinakoppa, S. G., 2004, ‘Automated prognostic tool for cervical cancer patient database’, in Proceedings of International Conference on Intelligent Sensing and Information Processing, M. Palaniswami (ed.), IEEE, Piscataway, NJ (International Conference on Intelligent Sensing and Information Processing).

Rajasekhar, S., Khalil, I. and Tari, Z., 2004, ‘A scalable and robust QoS architecture for WiFi P2P networks’, in Distributed Computing and Internet Technology, R. K. Ghosh and H. Mohanty (ed.), Springer, Heidelberg (First International Conference on Distributed Computing and Internet Technology).

Rossi, P. H. and Fernandez, G., 2004, ‘Design measures for distributed information systems: An empirical evaluation’, in Proceedings of the 1st International Workshop on Software Audit and Metrics, M. Serrano and M. Piattini (ed.), INSTICC Press, Portugal (First International Workshop on Software Audit and Metrics).

Ryan, C. and Westhorpe, C., 2004, ‘Application adaptation through transparent and portable object mobility in Java’, in On the Move to Meaningful Internet Systems 2004: CoopIS, DOA, and ODBASE, R. Meersman and Z. Tari (ed.), Springer, Berlin (2004 Distributed Objects and Applications International Conference).

41

Page 42: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Saeed, A. and Bevinakoppa, S. G., 2004, ‘Scalable continuous query system for web databases’, in Proceedings of the Second International Workshop on Web Services: Modeling, Architecture and Infrastructure, S. Bevinakoppa and J. Hu (ed.), INSTICC Press, Portugal (Second International Workshop on Web Services: Modeling, Architecture and Infrastructure).

Sinha, R., 2004, ‘Using compact tries for cache-efficient sorting of integers’, in Experimental and Efficient Algorithms: Third International Workshop, WEA 2004, C. C. Ribeiro and S. L. Martins (ed.), Springer, Berlin (Third International Workshop on Experimental and Efficient Algorithms).

Sinha, R. and Zobel, J., 2004, ‘Using random sampling to build approximate tries for efficient string sorting’, in Experimental and Efficient Algorithms: Third International Workshop, WEA 2004, C. C. Ribeiro and S. L. Martins (ed.), Springer, Berlin (Third International Workshop on Experimental and Efficient Algorithms).

Song, A. and Ciesielski, V., 2004, ‘Texture analysis by genetic programming’, in Proceedings of the 2004 Congress on Evolutionary Computation, G. W. Greenwood (ed.), IEEE, Piscataway, NJ (2004 Congress on Evolutionary Computation).

Sun, L. and Zhang, X. J., 2004, ‘Efficient frequent pattern mining on web logs’, in Advanced Web Technologies and Applications: Sixth Asia-Pacific Web Conference, APWeb 2004, J. X. Yu et al. (ed.), Springer, Berlin (Sixth Asia-Pacific Web Conference on Advanced Web Technologies and Applications).

Suyoto, I. S. and Uitdenbogerd, A. L., 2004, ‘Exploring microtonal matching’, in Fifth International Conference on Music Information Retrieval: Proceedings, C. L. Buyoli and R. Loureiro (ed.), Audiovisual Institute, Pompeu Fabra University, Barcelona, Barcelona (Fifth International Conference on Music Information Retrieval).

Tahaghoghi, S. and Williams, H. E., 2004, ‘Software for course management - The Webmark course management system’, in International Conference on Computers in Education 2004: A Conference of the Asia-Pacific Society for Computers in Education (APSCE), E. McKay (ed.), Common Ground Publishing, Melbourne (12th International Conference on Computers in Education).

Tahaghoghi, S., Thom, J. A. and Williams, H. E., 2004, ‘Representing colour for computing image similarity’, in Proceedings of the Sixth International Conference on Information Integration and Web Based Applications and Services, G. Kotsis et al. (ed.), Oesterreichische Computer Gesellschaft (Austrian Computer Society), Indonesia (Sixth International Conference on Information Integration and Web Based Applications and Services).

Tran, V. B., Harland, J. A. and Hamilton, M., 2004, ‘Expectation reasoning using regret and disappointment’, in Proceedings of the 16th European Conference on Artificial Intelligence, R. de Mántaras (ed.), IOS Press, Amsterdam (16th European Conference on Artificial Intelligence).

Tran, V. B., Harland, J. A. and Hamilton, M., 2004, ‘Observation expectation reasoning in agent systems’, in Principles of Knowledge Representation and Reasoning: Proceedings of the Ninth International Conference, D. Dubois et al. (ed.), AAAI Press, California (Ninth International Conference on Principles of Knowledge Representation and Reasoning).

Volkmer, T., Tahaghoghi, S. and Williams, H. E., 2004, ‘Gradual transition detection using

42

Page 43: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

average frame similarity’, in 2004 Conference on Computer Vision and Pattern Recognition Workshop. Volume 9 - Multimedia Data and Document Engineering, S. Guler et al. (ed.), IEEE, Piscataway, NJ (Fourth International Workshop on Multimedia Data and Document Engineering).

Vora, A., Tari, Z. and Bertok, P., 2004, ‘A hoarding approach for supporting disconnected write operations in mobile environments’, in Proceedings of the 23rd IEEE International Symposium on Reliable Distributed Systems, R. Prakash and J. Xu (ed.), IEEE, Piscataway, NJ (23rd IEEE International Symposium on Reliable Distributed Systems).

Xu, X. and Bertok, P., 2004, ‘Integration of heterogeneous web service components’, in Proceedings of the Second International Workshop on Web Services: Modeling, Architecture and Infrastructure, WSMAI 2004, S. Bevinakoppa and J. Hu (ed.), INSTICC Press, Portugal (Second International Workshop on Web Services: Modeling, Architecture and Infrastructure).

Yang, W., Allan, G. L., Xue, C. C., Frampton, K. M. and Sun, I., 2004, ‘Creating innovative educational technology as an outcome from software engineering education’, in International Conference on Computers in Education 2004: A Conference of the Asia-Pacific Society for Computers in Education (APSCE), E. McKay (ed.), Common Ground Publishing, Melbourne (12th International Conference on Computers in Education).

Yu, J., Thom, J. A. and Alem, L., 2004, ‘Group memory based on the task information’, in RIAO 2004 Conference Proceedings: Coupling approaches, coupling media and coupling languages for information retrieval, C. Fluhr et al. (ed.), Le Centre de Hautes Études Internationales d'Informatique Documentaire, Paris (RIAO 2004 Recherche d'Information Assistée par Ordinateur).

Zhang, Y. and Vines, P., 2004, ‘Using the web for automated translation extraction in cross-language information retrieval’, in Proceedings of the 27th Annual International ACM SIGIR Conference on Research and Development in Information Retrieval, K. Järvelin et al. (ed.), ACM Press, New York (27th Conference on Research and Development in Information Retrieval).

Zobel, J., 2004, ‘"Uni Cheats Racket": A case study in plagiarism investigation’, in Computing Education 2004 - Proceedings of the Sixth Australasian Computing Education Conference, R. Lister and A. L. Young (ed.), Australian Computer Society, Bedford Park, SA (Sixth Australasian Computing Education Conference).

Electrical and Computer Engineering

Book ChapterYu, X. and Chen, G., 2004, ‘Sliding mode control and chaos’, in Variable Structure Systems: From Principles to Implementation, IEE, UK, pp. 219-242, ISBN 0-86341-350-1.

Journal Articles Abdul Latif, A., Cosic, I., Kumar, D. K., Polus, B. I., Pah, N. D. and Djuwari, D., 2004, ‘EEG coherence changes between right and left motor cortical areas during voluntary muscular contraction’, in Australasian Physical and Engineering Sciences in Medicine, Australasian Physical and Engineering Sciences in Medicine, Brisbane, vol. 27, pp. 11-15, ISSN 0158-9938.

43

Page 44: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Al-Dabbagh, M. and Kapuduwage, S. K., 2004, ‘Effects of dynamic fault impendance variation on accuracy of fault location estimation for series compensated transmission lines’, in WSEAS Transactions on Circuits and Systems, WSEAS, New Jersey, vol. 3, pp. 1653-1657, ISSN 1109-2734.

Feng, Y., Bao, S. and Yu, X., 2004, ‘Inverse dynamics non-singular terminal sliding mode control of two-link flexible manipulators’, in International Journal of Robotics and Automation, ACTA, Calgary, vol. 19, pp. 91-102, ISSN 0826-8185.

Han, Q-L., Yu, X. and Gu, K., 2004, ‘On computing the maximum time-delay bound for stability of linear neutral systems’, in IEEE Transactions on Automatic Control, IEEE, United States, vol. 49, pp. 2281-2285, ISSN 0018-9286.

Holland, A. S., Leech, P. W. and Reeves, G. K., 2004, ‘Reactive ion etching of organic polymers for application in waveguide trench moulds’, in Journal of Materials Science, Kluwer Academic Publishers, United States, vol. 39, pp. 3505-3508, ISSN 0022-2461.

Holland, A. S., Reeves, G. K. and Leech, P. W., 2004, ‘Universal error corrections for finite semiconductor resistivity in cross kelvin Resistor test structures’, in IEEE Transactions on Electron Devices, IEEE, United States, vol. 51, pp. 914-919, ISSN 0018-9383.

Hussain, Z. M., 2004, ‘Comments on A high resolution quadratic time-frequency distribution for multicomponent signals analysis’, in IEEE Transactions on Signal Processing, IEEE , New Jersey, vol. 52, pp. 287-290, ISSN 1053-587X.

John, J. D., Jakob, C. F., Vinay, T. and Qin, L., 2004, ‘Phase differential angular rate sensor concept and analysis’, in IEEE Sensors Journal, IEEE, New York, vol. 4, pp. 471-478, ISSN 1530-437X.

Lau, Y. S., Hussain, Z. M. and Harris, R. J., 2004, ‘A time-dependent LMS algorithm for adaptive filtering’, in WSEAS Transactions on Circuits and Systems, WSEAS, Athens, vol. 3, pp. 35-42, ISSN 1109-2734.

Leech, P. W., Reeves, G. K., Holland, A. S. and Ridgeway, M., 2004, ‘The effect of Au and O implantation on the etch rate of CVD diamond’, in Applied Surface Science, Elsevier, North Holland, vol. 221, pp. 302-307, ISSN 0169-4332.

Lu, J., Chen, G., Yu, X. and Leung, H., 2004, ‘Design and analysis of multi-scroll chaotic attractors from saturated function series’, in IEEE Trans Circuits and Systems, IEEE, New York, vol. 51, pp. 2476-2490, ISSN 1057-7122.

Lu, J., Han, F., Yu, X. and Chen, G., 2004, ‘Generating 3-D multi-scroll chaotic attractors: A hysteresis series switching method’, in Automatica, Elsevier, North Holland, vol. 40, pp. 1677-1687, ISSN 0005-1098.

Lu, J., Yu, X. and Chen, G., 2004, ‘Chaos synchronization of general complex dynamical networks’, in Physica A: Statistical and Theoretical Physics, Elsevier, North Holland, vol. 334, pp. 281-302, ISSN 0378-4371.

Lu, J., Yu, X., Chen, G. and Cheng, D., 2004, ‘Characterizing the synchronization of small world

44

Page 45: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

dynamical networks’, in IEEE Transactions on Circuits and Systems Part I, IEEE, Piscataway, vol. 51, pp. 787-796, ISSN 1057-7122.

Malhotra, M. and Tari, Z., 2004, ‘MIDAS: An integrated e-commerce solution for Australian transport industries’, in International Journal of Web Engineering and Technology, Interscience Publishers, UK, vol. 1, pp. 353-373, ISSN 1476-1289.

Mansoori, S. A. and Mitchell, A., 2004, ‘RF transversal filter using an AOTF’, in IEEE Photonics Technology Letters, IEEE, New Jersey, vol. 16, pp. 879-881, ISSN 1041-1135.

Mansoori, S. A., Mitchell, A. and Ghorbani, K., 2004, ‘Photonic reconfigurable microwave filter with negative coefficents’, in Electronics Letters, IEEE, New Jersey, vol. 40, pp. 541-543, ISSN 0013-5194.

Marra, C., Nirmalathas, A., Lim, C., Attygalle, M., Novak, D., Ashton, B., Poladian, L., Rowe, W. S., Wang, T. and Besley, J., 2004, ‘FBG-based optical interface to support a multisector antenna in a spectrally efficient fiber radio system’, in IEEE Photonics Technology Letters, IEEE, New Jersey, vol. 16, pp. 254-256, ISSN 1041-1135.

Mollica, S., Sood, D., Evans, P. J., Noorman, J., Dytlewski, N., Brack, N., Pigram, P. and Latham, K., 2004, ‘Effect of aluminium ion implantation on the oxidation resistance of DC magnetron sputter-deposited TiB2 thin films’, in Surface and Coatings Technology, Elsevier, Lausanne, Switzerland, vol. 177-78, pp. 185-197, ISSN 0257-8972.

Mutzenich, S., Vinay, T. and Rosengarten, G., 2004, ‘Analysis of a novel micro-hydraulic actuation for MEMS’, in Sensors and Actuators A, Elsevier, Amsterdam, vol. 116, pp. 525-529, 3, ISSN 0924-4247.

Nguyen, G. T., Mitchell, A. and Visagathilagar, Y. S., 2004, ‘Investigation of resonantly enhanced modulators on LiNbO3 using FEM and numerical optimization technique’, in Journal of Lightwave Technology, IEEE, United States, vol. 22, pp. 526-533, ISSN 0733-8724.

Powell, D. A., Kalantar-Zadeh, K. and Wlodarski, W., 2004, ‘Numerical calculation of SAW sensitivity: application to ZnO/LiTaO3 transducers’, in Sensors and Actuators A: Physical, Elsevier, Lausanne, vol. 115, pp. 456-461, ISSN 0924-4247.

Sauren, M., Pirogova, E. and Cosic, I., 2004, ‘RRM analysis of protoporphyrinogen oxidase’, in Australasian Physical and Engineering Sciences in Medicine, Australasian College of Physical Scientists and Engineers in Medicine, Adelaide, vol. 27, pp. 147-152, ISSN 0158-9938.

Shang, L., Hussain, Z. M. and Harris, R. J., 2004, ‘Blind source separation of FM and doppler signals using T-distributions’, in WSEAS Transactions on Computers, WSEAS, Athens, vol. 3, pp. 20-24, ISSN 1109-2750.

Sharif Mahmoud, S., Hussain, Z. M. and O'Shea, P. J., 2004, ‘A comparative study of multipath mobile radio channel estimation algorithms’, in Australian Journal of Electrical and Electronics Engineering, Engineers Australia, Australia, vol. 1, pp. 15-22, ISSN 1448-8253.

Sharif Mahmoud, S., Hussain, Z. M. and O'Shea, P. J., 2004, ‘A geometrical-based channel model with hyperbolically distributed scatterers for a macrocell mobile environment with antenna array’, in Multimedia Cyberscape Journal , Multimedia University, Malaysia, vol. 2, pp. 1-10,

45

Page 46: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

ISSN 1675-9281.

Sharma, A. and Kumar, D. K., 2004, ‘Moments and wavelets for classification of human gestures represented by spatio-temporal templates’, in Lecture Notes in Computer Science, Springer, Germany, vol. 3339, pp. 215-226, ISSN 0302-9743.

Sun, L., Feng, Y. and Yu, X., 2004, ‘Synchronization for a class of chaotic systems using a robust sliding mode observer’, in Control and Decision (in Chinese), Elsevier, China, vol. 19, pp. 331-338, 3, ISSN 1001-0920.

Thompson, A., Hussain, Z. M. and O'Shea, P. J., 2004, ‘Efficient digital single-bit resonator’, in IEE Electronics Letters, IEE, United Kingdom, vol. 40, pp. 1396-1397, ISSN 0013-5194.

Thompson, A., O'Shea, P. J., Hussain, Z. M. and Steele, B., 2004, ‘Efficient single-bit ternary digital filtering using sigma-delta modulator’, in IEEE Signal Processing Letters, IEEE, New Jersey, vol. 11, pp. 164-166, ISSN 1070-9908.

Tian, Y-P., Yu, X. and Chua, L. O., 2004, ‘Time-delayed impulsive control of chaotic hybrid systems’, in International Journal of Bifurcation and Chaos in Applied Sciences and Engineering, World Scientific Publishing, Piscataway, NJ, vol. 14, pp. 1091-1104, ISSN 0218-1274.

Trinchi, A. V., Kaciulis, S., Pandolfi, L. S., Ghantasala, M. K., Li, Y. X., Wlodarski, W., Viticoli, S., Comini, E. and Sberveglieri, G., 2004, ‘Characterization of Ga2O3 based MRISiC hydrogen gas sensors’, in Sensors and Actuators B: Chemical, Elsevier, Lausanne, vol. 103, pp. 129-135, ISSN 0925-4005.

Trinchi, A. V., Wlodarski, W. and Li, Y. X., 2004, ‘Hydrogen sensitive Ga2O3 schottky diode sensor based on SiC’, in Sensors and Actuators B: Chemical, Elsevier, Lausanne, vol. 100, pp. 94-98, ISSN 0925-4005.

Trinchi, A. V., Wlodarski, W., Santucci, S., Claudio, D. D., Passacantando, M., Cantalini, C., Rout, B., Ippolito, S. J., Kalantar-Zadeh, K. and Sberveglieri, G., 2004, ‘Microstructural characterisation of RF magnetron sputtered ZnO thin films on SiC’, in Solid State Phenomena, Trans Tech Publications, Switzerland, vol. 99, pp. 123-126, ISSN 1012-0394.

Turker, E., Qin, L. and Harvey, A. L., 2004, ‘Adaptive synchronous vibration controller ASVC for magnetic bearing systems’, in WSEAS Transactions on Circuits and Systems, WSEAS, Greece, vol. 3, pp. 111-115, ISSN 1109-2734.

Turker, E., Qin, L. and Harvey, A. L., 2004, ‘Real time vibration cancellation in magnetic bearing systems’, in WSEAS Transactions on Computers, WSEAS, Greece, vol. 3, pp. 136-141, ISSN 1109-2750.

Virwani, K. R., Malshe, A. P., Sood, D. and Elliman, R. G., 2004, ‘Modification of mechanical properties of silicon nano-cantilevers by self ion implantation’, in Applied Physics Letters, American Institute of Physics, United States, vol. 84, pp. 3148-3150, ISSN 0003-6951.

Wang, L., 2004, ‘A tutorial on model predictive control: Using a linear velocity form model’, in Developments in Chemical Engineering and Mineral Processing, Curtin University of Technology, Australia, vol. 12, pp. 573-614, ISSN 0969-1855.

46

Page 47: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Wang, L., Gawthrop, P. J., Chessari, C., Podsiadly, T. and Giles, A., 2004, ‘Indirect approach to continuous time system identification of food extruder’, in Journal of Process Control, Elsevier, United Kingdom, vol. 14, pp. 603-615, ISSN 0959-1524.

Wang, Y., Sood, D., Ghantasala, M. K. and Dytlewski, N., 2004, ‘Characterization of sputtered SmCo thin films for light element contamination using RBS and HIERDA techniques’, in Vacuum, Elsevier, United States, vol. 75, pp. 17-23, ISSN 0042-207x.

Conference Publications

Abdul-Latif, A., Cosic, I., Kumar, D. K., Polus, B. I. and Da Costa, C., 2004, ‘Power changes of EEG signals associated with muscle fatigue: The root mean square analysis of EEG bands’, in Proceedings of 2004 Intelligent Sensors, Sensor Networks and Information Processing Conference, J. Rama (ed.), IEEE, USA (2004 Intelligent Sensors, Sensors Networks and Information Processing Conference).

Abdul-Latif, A., Cosic, I., Kumar, D. K., Polus, B. I. and Djuwari, D., 2004, 'Corticomuscular coherence after muscle fatigue’, in Biomedical Engineering Proceedings, B. Tilg (ed.), ACTA Press, Calgary (Biomedical Engineering) .

Abyaneh, H. A., Karegar, H. K. and Al-Dabbagh, M., 2004, ‘Interpolation of measured data based on neural network to model overcurrent relays in power systems’, in Proceedings of the Fifth Asian Control Conference, R. Evans and I. Mareels (ed.), IEEE, Melbourne (Fifth Asian Control Conference).

Abyaneh, H. A., Razavi, F., Al-Dabbagh, M. and Karegar, H. K., 2004, ‘Break point determination for interconnected power systems’, in Proceedings of the 2004 WSEAS Conference on Power Systems and Electromagnetic Compatibility, C. Lucas and N. Mastorakis (ed.), WSEAS, Turkey (WSEAS Conference on Power Systems and Electromagnetic Compatibility).

Al-Dabbagh, M. and Kapuduwage, S. K., 2004, ‘A new method for estimating fault locations on series compensated high voltage transmission lines’, in Proceedings of the Fourth IASTED International Conference on Power and Energy Systems, P. D. Bourkos and P. Haloris (ed.), ACTA, Anaheim, CA (Fourth IASTED International Conference on Power and Energy Systems).

Al-Dabbagh, M. and Yousif, N. I., 2004, ‘Sub synchronous resonance assessment using time frequency distribution algorithm’, in Proceedings of the 2004 Australasian Universities Power Engineering Conference, D. Saha (ed.), University of Queensland, Brisbane (Australasian Universities Power Engineering Conference).

Al-Dabbagh, M., Thoroughgood, D. L. and Bates, I., 2004, ‘Efficient concentrated photovoltaic energy system for household applications’, in Technology Advances and Environmental Issues, F. Abulfotuh (ed.), Arab Academy for Science and Technology and Maritime Transport, Cairo (World Conference on Energy for Sustainable Development Technology Advances and Environmental Issues).

Al-Dabbagh, M., Yousif, N. I. and Graszkiewicz, P., 2004, ‘Continuous non-linear model of series compensated transmission lines for sub synchronous resonance investigations’, in Proceedings of the Fourth IASTED International Conference on Power and Energy Systems, P.

47

Page 48: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Bourkos and P. Haloris (ed.), ACTA, Anaheim (Fourth IASTED International Conference on Power and Energy Systems).

Balkunje, V. S., Holland, A. S. and Mitchell, A., 2004, ‘Fabrication of polymer rib waveguides using SU-8’, in Proceedings of the Australian Conference on Optical Fibre Technology, B. Eggleton et al. (ed.), Australian National University, Canberra (Australian Conference on Optical Fibre Technology).

Barry, T. J. and Wang, L., 2004, ‘A model-free predictive controller with Laguerre polynomials’, in Proceedings of the Fifth Asian Control Conference, I. Mareels (ed.), IEEE, Melbourne (Fifth Asian Control Conference).

Beckett, P. L., Brown, A., Hamilton, M. and Richardson, J., 2004, ‘A case for re-articulating areas of information technology to provide a Masters program in information and communication technologies’, in International Conference on Computers in Education 2004: A conference of the Asia-Pacific Society for Computers in Education (APSCE) - Full proceedings, E. McKay (ed.), Common Ground Publishing, Melbourne (12th International Conference on Computers in Education).

Brown, A. and Kavanagh, M., 2004, ‘Curriculum challenges in the changing role of engineering in the 21st Century’, in Proceedings of the 33rd International Symposium of IGIP/IEEE/ASEE, F. Fluckiger (ed.), IGIP/IEEE/ASEE, Switzerland (International Symposium of IGIP/IEEE/ASEE).

Brown, A. and Kavanagh, M., 2004, ‘Developing, supporting and managing e-learning environments in engineering education’, in Proceedings of the 33rd International Symposium of IGIP/IEEE/ASEE, F. Fluckiger (ed.), IGIP/IEEE/ASEE, Switzerland (International Symposium of IGIP/IEEE/ASEE).

Brown, A. and Rudolph, H., 2004, ‘Educating engineers for the 21st century’, in Proceedings of the 15th Annual AAEE, C. Snook and D. Thorpe (ed.), University of Southern Queensland, Toowoomba (Creating Flexible Learning Environments).

Brown, R. W., 2004, ‘Undergraduate summative assessment experiences’, in Proceedings of the 34th Annual Conference of Frontiers in Education, D. Moore et al. (ed.), IEEE, New Jersey (Frontiers in Education).

Bui, L., Mitchell, A. and Chio, T., 2004, ‘Demonstration of wide band RF photonic transversal phase-shifter’, in Proceedings of the Optical Fiber Communication Conference, P. Iannone and T. Strasser (ed.), Optical Society of America, Washington, DC (Optical Fibre Communications Conference).

Bui, L., Mitchell, A., Ghorbani, K., Lopez-Lara, E. R. and Chio, T., 2004, ‘Four-element broadband photonically phased array antenna using the vector sum phase shifters’, in Proceedings of the Australian Conference on Optical Fibre Technology, B. Eggleton et al. (ed.), ACOFT/AOS, Canberra (Australian Conference on Optical Fibre Technology).

Chaffey, J., Austin, M. W. and Switala, I., 2004, ‘Bulk micromachined optical Fabry-Perot modulator’, in Proceedings of the SPIE International Symposium, J. Chennupati et al. (ed.), SPIE, Washington, DC (Microelectronics, MEMS and Nanotechnology).

Cher, C., Holland, A. S. and Rosengarten, G., 2004, ‘Optimisation techniques for plasma etching

48

Page 49: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

of thermoset polymers for microfluidic channels’, in Proceedings of SPIE - The International Society of Optical Engineering, D. V. Nicolau et al. (ed.), SPIE, Bellingham, Perth (International Society of Optical Engineering - Microelectronics, MEMS and Nanotechnology).

Chiou, A. and Yu, X., 2004, ‘P-Expert: Integrated expert advisory system for control and management of parthenium weed infestation’, in Proceedings of the 30th Annual Conference of the IEEE Industrial Electronics Society, S. Yuta (ed.), IEEE, Busan, Korea (IEEE Industrial Electronics Society).

Chong, H. W., Mitchell, A., Austin, M. W. and Priest, T., 2004, ‘Laser processing of lithium niobate for wafer-level microfabrication applications’, in Proceedings of the First Pacific International Conference on Application of Lasers and Optics2004, M. Brandt and E. Harvey (ed.), Laser Institute of America, Melbourne (First Pacific International Conference on Application of Lasers and Optics 2004).

Cvetkovic, D. and Cosic, I., 2004, ‘The induced extremely low frequency (ELF) electromagnetic field rhythms on EEG activity’, in Proceedings of the International Federation for Medical and Biological Engineering, M. Bracale (ed.), AIIMB/IFMBE, Naples (International Federation for Medical and Biological Engineering - Medicon and Health Telematics 2004).

Cvetkovic, D. and Cosic, I., 2004, ‘The responses of audio and visual rhythms on EEG activity ¿ Preliminary results’, in Proceedings of the International Federation for Medical and Biological Engineering, M. Bracale (ed.), AIIMB/IFMBE, Naples (International Federation for Medical and Biological Engineering - Medicon and Health Telematics 2004).

Cvetkovic, D., Cosic, I. and Djuwari, D., 2004, ‘The induced rhythmic oscillations of neural activity in the human brain’, in Proceedings of the Second IASTED International Conference on Biomedical Engineering, B. Tilg (ed.), ACTA, Calgary (IASTED International Conference on Biomedical Engineering).

Doss, R. R., Jennings, A. and Shenoy, N., 2004, ‘A review of current mobility prediction techniques for ad hoc networks’, in Proceedings of the Fourth IASTED International Multi-Conference on Wireless and Optical Communications, A. Fapojuwo (ed.), ACTA, Anaheim, CA (IASTED International Multi Conference on Wireless and Optical Communications).

Doss, R. R., Jennings, A. and Shenoy, N., 2004, ‘A review on current work in mobility prediction for wireless networks’, in Proceedings Third Asian International Mobile Computing Conference, A. Phonphoem (ed.), Kasetsart University, Thailand (Third Asian International Mobile Computing Conference).

Doss, R. R., Jennings, A. and Shenoy, N., 2004, ‘Mobility prediction based routing for minimizing control overhead in mobile ad hoc networks’, in Proceedings of the 2004 International Conference on Wireless Networks, H. Arabnia (ed.), CSREA, Nevada,(International Conference on Wireless Networks).

Eum, S-Y., Murphy, J. and Harris, R. J., 2004, ‘TomoKruithof vs tomogravity for backbone networks’, in Proceedings of Australian Telecommunication Networks and Applications Conference, R. Mathar (ed.), ATNAC 2004, Sydney (Australian Telecommunication Networks and Applications Conference).

Fang, J. Q., Bedi, R. and Cosic, I., 2004, ‘Measurement of skin electric resistance on biological

49

Page 50: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

active points with various contact pressures’, in Proceedings of International Conference on Electrical Bioimpedance and Electrical Impedance Tomography, A. Nowakowski, et al. (ed.), Gdansk University of Technology, Gdansk (International Conference on Electrical Bioimpedance and Electrical Impedance Tomography).

Feng, Y., Sun, L. and Yu, X., 2004, ‘Finite time synchronization of chaotic systems with unmatched uncertainties’, in Proceedings of the 30th Annual Conference of IEEE Industrial Electronics Society, S. Yuta (ed.), IEEE, Korea (Conference of IEEE Industrial Electronics Society).

Gawthrop, P. J. and Wang, L., 2004, ‘Estimation of physical parameters of stable and unstable systems via estimation of step response’, in Proceedings on the Eighth International Conference on Control, Automation, Robotics and Vision, X. Lihua (ed.), IEEE, Kunming (International Conference on Control, Automation, Robotics and Vision).

Goel, S. K., Sharda, H. and Taniar, D., 2004, ‘Atomic commitment in grid database systems’, in Proceedings of the IFIP International Conference 2004, H. Jin (ed.), Springer, Wuhan, China (Network and Parallel Computing).

Goel, S. K., Sharda, H. and Taniar, D., 2004, ‘Failure recovery in grid database systems’, in IWDC International Workshop on Distributed Computing, G. Goos and J. Hartmanis (ed.), Springer, Germany (IWDC International Workshop on Distributed Computing).

Gopalakrishnan, A., Mahmoud, S. and Hussain, Z. M., 2004, ‘An elliptical power-limit hyperbolic channel model for macrocell mobile environment’, in Proceedings of the 3rd Workshop on the Internet, Telecommunications and Signal Processing, T. and B. Wysocki (ed.), University of South Australia, Adelaide (Workshop on the Internet, Telecommunications and Signal Processing).

Guan, Z-H., Hill, D. J., Shen, X. and Yu, X., 2004, ‘Synchronization of chaotic systems via hybrid impulsive and switching control’, in Proceedings of the Fifth Asian Control Conference, M. Cantoni (ed.), IEEE, Melbourne (Fifth Asian Control Conference).

Han, F., Yu, X., Al-Dabbagh, M. and Wang, Y., 2004, ‘Fault location in power distribution networks using sinusoidal steady state analysis’, in Proceedings of the 7th Asia Pacific Complex Systems Conference, R Stonier et. al. (ed.), Central Queensland University, Rockhampton (Seventh Asian Pacific Complex Systems Conference).

Han, F., Yu, X., Wang, Y. and Al-Dabbagh, M., 2004, ‘Sinusoidal steady-state analysis for fault location in power distribution system’, in Proceedings of the 30th Annual Conference of IEEE Industrial Electronics Society, S. Yuta (ed.), IEEE, Korea (30th Annual Conference of IEEE Industrial Electronics Society).

Han, Q-L., Yu, L., Yu, X., Yue, D. and Ma, X., 2004, ‘Robust stability anaylsis of linear systems with time-varying delay and nonlinear perturbations’, in Proceedings of the Fifth Asian Control Conference, M. Cantoni (ed.), IEEE, Melbourne (5th Asian Control Conference).

Han, Z-G. and Yu, X., 2004, ‘An adaptive model free control design and its application’, in Proceedings of 2nd IEEE Conference on Industrial Informatics, R. Schoop et al. (ed.), IEEE, Berlin (IEEE Conference on Industrial Informatics).

50

Page 51: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Hussain, Z. M., 2004, ‘Instantaneous frequency estimation of FM signals using the T-class of time-frequency distributions’, in Proceedings of the WSEAS Conferences: *Applied Informatics and Communications *Signal Processing, Computational Geometry and Artificial Vision *Systems Theory and Scientific Computation, M. I. Garcia-Planas et al. (ed.), WSEAS, Athens (Applied Informatics and Communications).

Hussain, Z. M., 2004, ‘The time-delay digital tanlock loop for demodulation of PM signals’, in Proceedings of the WSEAS Conferences: *Applied Informatics and Communications *Signal Processing, Computation Geometry and Artificial Vision *Systems Theory and Scientific Computation, M. I. Garcia-Planas et al. (ed.), WSEAS, Athens (Applied Informatics and Communications).

Ippolito, S. J., Kandasamy, S., Kalantar-Zadeh, K., Wlodarski, W. and Holland, A. S., 2004, ‘Comparison between conductometric and layered SAW hydrogen gas sensor’, in Proceedings of SPIE - The International Society of Optical Engineering, D. Abbott et al. (ed.), SPIE, Bellingham (Microelectronics: Design, Technology and Packaging).

Jakafatus, A., Wang, L. and Cluett, W., 2004, ‘Design of an on-line titrator for nonlinear pH control’, in Proceedings of the Seventh International Symposium on Dynamics and Control of Process Systems, W. D. Seider (ed.), Elsevier, Boston (Seventh International Symposium on Dynamics and Control of Process Systems).

Jusak, J. and Hussain, Z. M., 2004, ‘Evaluation of a sinusoidally-distributed dithering for signed-error constant modulus algorithm: Performance comparison with uniformly-distributed dithering’, in Proceedings of the 3rd Workshop on the Internet, Telecommunications and Signal Processing, T. and B. Wysocki (ed.), University of South Australia, Adelaide (Workshop on the Internet, Telecommunications and Signal Processing).

Jusak, J. and Hussain, Z. M., 2004, ‘Low complexity blind adaptive multi-user detection for up-link DS-CDMA’, in Proceedings of the Australian Telecommunication Networks and Applications Conference 2004, M.Zukerman (ed.), University of New South Wales, Sydney (Australian Telecommunication Networks and Applications Conference).

Jusak, J. and Hussain, Z. M., 2004, ‘Mixed-norm constant modulus algorithm for channel equalization of wireless communication systems ‘, in Proceedings of the WSEAS Conferences: *Applied Informatics and Communications *Signal Processing, Computation Geometry and Artificial Vision *Systems Theory and Scientific Computation, M. I. Garcia-Planas et al. (ed.), WSEAS, Athens (Applied Informatics and Communications).

Jusak, J., Hussain, Z. M. and Harris, R. J., 2004, ‘Performance of variable step-size dithered signed error CMA for blind equalization’, in Conference Proceedings of the IEEE TENCON 2004, E. Leelarasmee (ed.), IEEE, New Jersey (IEEE Tencon 2004 - Analog and Digital Techniques in Electrical Engineering).

Kandasamy, S., Kalantar-Zadeh, K., Rosengarten, G. and Wlodarski, W., 2004, ‘Modelling of a thin film thermoelectric micro-peltier module’, in Proceedings of the IEEE TENCON 2004 Conference, E. Leelarasmee (ed.), IEEE, Thailand (IEEE Tencom 2004).

Kapuduwage, S. K. and Al-Dabbagh, M., 2004, ‘One end simplified fault location algorithm using instantaneous values for series compensated high voltage transmission lines’, in Proceedings of the 2004 Australasian Universities Power Engineering Conference, D. Saha (ed.),

51

Page 52: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

University of Queensland, Brisbane (Australasian Universities Power Engineering Conference).

Kist, A. and Harris, R. J., 2004, ‘Cost efficient overflow routing for outbound ISP traffic’, in Proceedings of the Ninth International Symposium on Computers and Communications, A. Puliafito and S. Papavassiliou (ed.), IEEE, Piscataway, NJ, Alexandria (Ninth International Symposium on Computers and Communications).

Kist, A. and Harris, R. J., 2004, ‘Guiding mice and elephants in an optical world’, in Australian Telecommunications Networks and Applications Conference, S. Jha and D. Everitt (ed.), ATNAC 2004, Sydney (Australian Telecommunications Networks and Applications Conference).

Kist, A. and Harris, R. J., 2004, ‘QoS framework for SIP signalling’, in Proceedings of the International Conference on Wireless and Optical Communications, A. O. Fapojuwo (ed.), ACTA, Calgary (International Conference on Wireless and Optical Communications).

Kumar, D. K., Matta, S., Yu, X. and Burry, M. C., 2004, ‘Discriminative analysis of image to sound mapping’, in Proceedings of the First International Conference On Intelligent Sensing And Information Processing, M. Palliniswamy (ed.), IEEE, Chennai (First International Conference on Intelligent Sensing and Information Processing).

Kumar, D. K., McLachlan, N. M., Kumar, S. and Sharma, A., 2004, ‘Wavelet directional histograms for classification of human gestures represented by spatio-temporal templates’, in Proceedings of the 10th International Multi-Media Modelling Conference, P. Chen (ed.), IEEE, Brisbane (10th International Multimedia Modelling Conference).

Kumar, S., Kumar, D. K. and Sharma, A., 2004, ‘Sensitivity analysis of hand movement classification technique using motion templates’, in Proceedings of the 14th IEEE Workshop on Machine Learning for Signal Processing, S. Douglas (ed.), IEEE, Brazil (14th IEEE Workshop on Machine Learning for Signal Processing).

Kumar, S., Kumar, D. K. and Sharma, A., 2004, ‘Visual hand movements for machine control’, in Proceedings of the First International Conference on Informatics in Control, Automation and Robotics, J. Filipe (ed.), Kluwer, Portugal (First International Conference on Informatics in Control, Automation and Robotics).

Kumar, S., Kumar, D. K., Alemu, M. A. and Burry, M. C., 2004, ‘Detection of the human stress response to auditory noise’, in Proceedings of the Annual Conference of the Australian Acoustical Society, D. Mee et al. (ed.), Australia Acoustic Society, Gold Coast (Annual Conference of the Australian Acoustical Society).

Kumar, S., Kumar, D. K., Alemu, M. A. and Burry, M. C., 2004, ‘Effect of noise on facial EMG’, in Proceedings of the Annual Conference of the Australian Acoustical Society, D. Mee et al. (ed.), Australia Acoustic Society, Gold Coast (Annual conference of the Australian Acoustical Society).

Kumar, S., Kumar, D. K., Alemu, M. A. and Burry, M. C., 2004, ‘EMG based voice recognition’, in Proceedings of the 2004 Intelligent Sensors, Sensor Networks and Information Processing Conference, M. Palaniswami (ed.), IEEE, Melbourne (2004 Intelligent Sensors, Sensors Networks and Information Processing).

Kumar, S., Kumar, D. K., Sharma, A. and McLachlan, N. M., 2004, ‘Classification of visual hand movements using multiresolution wavelet images’, in Proceedings of the First International

52

Page 53: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Conference on Intelligent Sensing and Information Processing, M. Palliniswamy (ed.), IEEE, Chennai, India (First International Conference on Intelligent Sensing and Information Processing).

Lau, Y. S. and Hussain, Z. M., 2004, ‘Chaos shift keying spread spectrum with multicarrier modulation for secure digital communication’, in Proceedings of the WSEAS Conferences: Applied Informatics and Communications * Signal Processing, Computation Geometry and Artificial Vision * Systems Theory and Scientific Computation, M. I. Garcia-Planas et al. (ed.), WSEAS, Athens (Applied Informatics and Communications).

Lau, Y. S. and Hussain, Z. M., 2004, ‘Chaotic-based CDMA Versus PN-based CDMA for digital secure communications: A comparative study’, in Proceedings of the Australian Telecommunication Networks and Applications Conference 2004, M.Zukerman (ed.), University of New South Wales, Sydney (Australian Telecommunication Networks and Applications Conference).

Lau, Y. S. and Hussain, Z. M., 2004, ‘Chaotic-based OFDM-CDMA for secure digital communications: Performance comparison with PN-based OFDM-CDMA’, in Proceedings of the 3rd Workshop on the Internet, Telecommunications and Signal Processing, T. and B. Wysocki (ed.), University of South Australia, Adelaide (Workshop on the Internet, Telecommunications and Signal Processing).

Lau, Y. S., Hussain, Z. M. and Harris, R. J., 2004, ‘A weight-vector LMS algorithm for adaptive beamforming’, in Conference Proceedings of the IEEE TENCON, E. Leelarasmee (ed.), IEEE, New Jersey (IEEE Tencon -Analog and Digital Techniques in Electrical Engineering).

Lech, M. and Hawksworth, G. S., 2004, ‘A speech enhancement method for improving intelligibility in the presence of an ambient noise’, in Proceedings of the 10th Australian International Conference on Speech Science and Technology and Australasian Language Technology Workshop, S. Cassidy (ed.), Macquarie University, Sydney (International Conference on Speech Science and Technology and Australasian Language Technology Workshop).

Leech, P. W., Reeves, G. K. and Holland, A. S., 2004, ‘Patterning and reactive ion etching of diamond films using light coupling masks’, in Proceedings of the Materials Research Society Symposium, D. Taylor (ed.), Materials Research Society, USA (Materials Research Society Symposium).

Lin, K. H. and Hussain, Z. M., 2004, ‘Adaptive bit and power allocation with sub-channel grouping for OFDM systems‘, in Proceedings of the 3rd Workshop on the Internet, Telecommunications and Signal Processing, T. and B. Wysocki (ed.), University of South Australia, Adelaide (Workshop on the Internet, Telecommunications and Signal Processing).

Lin, K. H. and Hussain, Z. M., 2004, ‘Adaptive weighting for OFDM systems: Performance evaluation in correlated MIMO frequency selective channels’, in Proceedings of the Australian Telecommunication Networks and Applications Conference 2004, M. Zukerman (ed.), University of New South Wales, Sydney (Australian Telecommunication Networks and Applications Conference).

Lin, K. H., Hussain, Z. M. and Harris, R. J., 2004, ‘Adaptive transmit eigenbeamforming with orthogonal space-time block coding in correlated space-time channels’, in Proceedings of the 2004 IEEE International Conference on Acoustics, Speech, and Signal Processing, L. Deng and

53

Page 54: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

P. Kabal (ed.), IEEE, New Jersey (IEEE International Conference on Acoustics, Speech, and Signal Processing).

Lin, K. H., Hussain, Z. M. and Harris, R. J., 2004, ‘Space-time OFDM with adaptive beamforming: Performance in spatially correlated channels’, in Conference Proceedings of the IEEE TENCON 2004, E. Leelarasmee (ed.), IEEE, New Jersey (IEEE Tencon - Analog and Digital Techniques in Electrical Engineering).

Liu, F., Wang, J. and Dillon, T., 2004, ‘An object-oriented approach on web information representation and derivation’, in Proceedings of the 2004 IEEE International Conference on e-Technology, e-Commerce, S-T. Yuan and J. Liu (ed.), IEEE, California (2004 IEEE International Conference on e-Technology, e-Commerce).

Liu, F., Wang, J. and Dillon, T., 2004, ‘GOPT-resolution in web information derivation’, in Sixth International Conference on Information Integration and Web-based Applications and Services, G. Kotsis et al. (ed.), Oesterreichische Computer Gesellschaft, Indonesia (Sixth International Conference on Information Integration and Web-based Applications and Services).

Lu, J., Chen, G., Yu, X. and Leung, H., 2004, ‘Generating multi-scroll chaotic attractors via switching control’, in Proceedings of the 5th Asian Control Conference, M. Cantoni (ed.), IEEE, Melbourne (5th Asian Control Conference).

Mansoori, S. A., Mitchell, A. and Ghorbani, K., 2004, ‘RF transversal filter with negative coefficients’, in Proceedings of the Australian Conference on Optical Fibre Technology, B. Eggleton et al. (ed.), ACOFT/AOS, Canberra (Australian Conference on Optical Fibre Technology).

Mathe, V. K., Sood, D. and Hayes, J. P., 2004, ‘Laser patterning of thin films of TiNiPd deposited on silicon substrate’, in Proceedings of the Society for Optical Engineering, J.-C. Chiao et al. (ed.), SPIE, Washington, DC (Device and Process Technologies for MEMS, Microelectronics, and Photonics III).

Mathers, N. M., Ghorbani, K. and Thompson, L. A., 2004, ‘Materials for inflatable communications structures’, in Proceedings of the Eighth Australian Space Development Conference, P. Young (ed.), National Space Society of Australia, Australia (Eighth Australian Space Development Conference).

Mitchell, A., Austin, M. W., Edwards, P. J., Binh, L. N., Bui, L., Mansoori, S. A. and Lai, W., 2004, ‘Ultra-broadband shortwave polarization modulators for high-speed free-space quantum cryptography’, in Proceedings of SPIE 48th Annual Meeting, R. E. Meyers and Y. Shih (ed.), SPIE, Bellingham (Quantum Communications and Quantum Imaging).

Mitchell, A., Holland, A. S., Vora, K. D. and Ghantasala, M. K., 2004, ‘Integration of microfluidic channels and optical waveguides using low-cost polymer microfabrication techniques’, in Proceedings of the IEEE Biophotonics Summer Topical Conference 2004, R. R. Jacobs (ed.), IEEE, New Jersey (Biophotonics Summer Topical Conference).

Mohd Mokhtar, R., Wang, L., Qin, L. and Barry, T. J., 2004, ‘Continuous time system identification of magnetic bearing systems using frequency response data’, in Proceedings of the Fifth Asian Control Conference, I. Mareels (ed.), IEEE, Melbourne (Fifth Asian Control Conference).

54

Page 55: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Murphy, J., Suryasaputra, R., Lloyd-Smith, B. and Nelson, R., 2004, ‘Dynamic resource management using LP weight setting in an MPLS domain’, in Proceedings of Next Generation Teletraffic and Wired/Wireless Advanced Networking, Y.Koucheryavy et al. (ed.), Tampere University of Technology, Tampere, Finland (Next Generation Teletraffic and Wired/Wireless Advanced Networking).

Mustafa, V., Tan, B. K. and Kangsanant, T., 2004, ‘Towards emotional agents that monitor emotionals for Elderly Care’, in Proceedings of the 2004 International Conference on Computational Intelligence for Modelling Control and Automation, M. Mohammadian (ed.), University of Canberra, Canberra (International Conference on Computational Intelligence for Modelling Control and Automation).

Neri, G., Bonavita, A., Galvagno, S., Trinchi, A. V. and Wlodarski, W., 2004, ‘Doped ZnO thin films for low temperature oxygen gas sensing’, in Proceedings of the 8th Italian Conference on Sensors and Microsystems, C. Di Natale and A. D’Amico (ed.), World Scientific, Singapore (8th Italian Conference on Sensors and Microsystems).

Nguyen, D. D., Wang, J. and Nguyen, D., 2004, ‘Stable max-min fair resource allocation for end to end congestion control’, in Proceedings of the Second International Conference on Advances in Mobile Multimedia, G. Kotsis et al. (ed.), Oesterreichische Computer Gesellschaft, Indonesia (Second International Conference on Advances in Mobile Multimedia).

Nguyen, G. T. and Mitchell, A., 2004, ‘Design of antireflection coatings for CWDM by numerical optimization’, in Proceedings of the Australian Conference on Optical Fibre Technology, B. Eggleton et al. (ed.), ACOTFT/AOS, Canberra (Australian Conference on Optical Fibre Technology).

Pah, N. D. and Kumar, D. K., 2004, ‘Classifying surface electromyography with thresholding wavelet network’, in Proceedings of the IEEE International Workshop on Biomedical Circuits and Systems, T. S. Lande (ed.), IEEE, Singapore (IEEE International Workshop on Biomedical Circuits and Systems).

Pah, N. D. and Kumar, D. K., 2004, ‘Electromyography based finger movement identification for human computer interface’, in Proceedings of the International Conference on Informatics in Control, Automation and Robotics, J. Filipe (ed.), Kluwer, Portugal (International Conference on Informatics in Control, Automation and Robotics).

Phan, H. V., Lech, M. and Nguyen, T. D., 2004, ‘Registration of 3D range images using particle swarm optimization’, in Asian'04 Ninth Asian Computing Science Conference, M. Maher (ed.), Springer, Berlin (Ninth Asian Computing Science Conference.)

Pirogova, E. and Cosic, I., 2004, ‘Application of signal processing in computational analysis of HSP interactions’, in Proceedings of the 2nd IASTED International Conference on Biomedical Engineering, B. Tilg (ed.), ACTA Press, Anaheim, CA (IASTED International Conference on Biomedical Engineering).

Pirogova, E., Akay, M. and Cosic, I., 2004, ‘Analysis of interactions between tumor suppressor and heat shock proteins using the RRM approach’, in Proceedings of the IFMBE, B. Tilg (ed.), AIMB/IFMBE, Anaheim (IFMBE - MEDICON and Health Telematics 2004).

55

Page 56: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Poole, E. J. and Kumar, D. K., 2004, ‘Eye gaze for computer control’, in Proceedings of the International Conference on Informatics in Control, Automation And Robotics, J. Filipe (ed.), INSTICC, Portugal (International Conference on Informatics in Control).

Popat, D., Sharda, H. and Taniar, D., 2004, ‘Classification of fuzzy data in database management system’, in Proceedings of the Eighth International Conference on Knowledge, M. G. Negoita et al. (ed.), Springer, Germany (Eighth International Conference on Knowledge).

Radcliffe, P. J., 2004, ‘Accidental teaching in software subjects’, in Proceedings of the 15th Annual Conference for the Australasian Association of Engineering Educators, C. Snook and D. Thorpe (ed.), AAEE, Toowoomba (Annual Conference for the Australasian Association of Engineering Educators - Creating Flexible Learning Environments).

Radcliffe, P. J., 2004, ‘Automatic testing of software in university courses’, in Proceedings of the 15th Annual Conference for the Australasian Association of Engineering Educators, C. Snook and D. Thorpe (ed.), AAEE, Toowoomba (Annual Conference for the Australasian Association of Egnineering Educators - Creating Flexible Learning Environments).

Ragupathy, S., Kumar, D. K. and Polus, B. I., 2004, ‘Relationship of magnitude of electromyogram of the lumbar muscle to static posture’, in Proceedings of the 26th Annual International Conference of the IEEE Engineering Medicine and Biology Society, Z. P. Liang (ed.), IEEE, Piscataway (IEEE – Engineering Medicine and Biology Society).

Ragupathy, S., Kumar, D. K., Polus, B. I. and Kamei, K., 2004, ‘Electrocardiogram removal from electromyogram of the lumbar muscles’, in Proceedings of the 26th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, Z. P. Liang (ed.), IEEE, Piscataway (IEEE – Engineering Medicine and Biology Society).

Rowe, W. S. and Waterhouse, R. B., 2004, ‘Edge-fed patch antenna arrays with reduced spurious radiation’, in Proceedings of the IASTED International Conference Antennas, Radar and Wave Propagation, C. Christodoulou (ed.), ACTA Press, Calgary (IASTED International Conference Antennas, Radar and Wave Propagation).

Rowe, W. S. and Waterhouse, R. B., 2004, ‘Investigation of proximity coupled patch antennas suitable for MMIC integration’, in Proceedings of IEEE International Antennas and Propagation Symposium and USNC/URSI National Radio Science Meeting, H. Pao (ed.), IEEE, Piscataway, NJ (IEEE International Antennas and Propagation Symposium and USNC/URSI National Radio Science Meeting).

Rowe, W. S. and Waterhouse, R. B., 2004, ‘Reducing spurious radiation in edge-fed patch antennas’, in Proceedings of the IEEE International Antennas and Propagation Symposium and URSI North American Radio Science Meeting, H.-Y. Pao (ed.), IEEE, Piscataway, NJ (2004 IEEE AP-S International Symposium and USNC/URSI National Radio Science Meeting).

Shang, L., Hussain, Z. M. and Harris, R. J., 2004, ‘An efficient mobile rayleigh fading channel simulator: A comparison with Clarke’s model’, in Conference Proceedings of the IEEE TENCON 2004 , E. Leelarasmee (ed.), IEEE, New Jersey (IEEE Tencon - Analog and Digital Techniques in Electrical Engineering).

Shang, L., Hussain, Z. M. and Harris, R. J., 2004, ‘Performance of quadratic time-frequency distributions in blind source separation of speech signals’, in Proceedings of the 2004 IEEE

56

Page 57: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

International Symposium on Spread Spectrum Techniques and Applications, I.Oppermann (ed.), IEEE, NJ (IEEE International Symposium on Spread Spectrum Techniques and Applications).

Sharda, H., 2004, ‘Opportunities for twinning and collaborative teaching with India in engineering coursework programs at undergraduate and postgraduate levels’, in Proceedings of the 15th Annual Australasian Association for Engineering Education, C. Snook and D. Thorpe (ed.), Australian Association for Engineering Education, Australia (15th Annual Australasian Association for Engineering Education).

Sharda, H. and Butler, A. M., 2004, ‘The role of Alumni is increasing university/industry interaction’, in Proceedings of the Australasian Association for Engineering Education Conference, C. Snook and D. Thorpe (ed.), AAEE, Australia (Australasian Association for Engineering Education Conference).

Sharda, H. and Butler, A. M., 2004, ‘The role of postgraduate part time students in forming industry linkages’, in Proceedings of the Fourth Global Congress on Engineering Education, Z. Pudlowski (ed.), UNESCO-UICEE, Melbourne (Fourth Global Congress on Engineering Education).

Sharif Mahmoud, S., Hussain, Z. M. and O'Shea, P. J., 2004, ‘Multipath mobile channel model for microcell environment’, in Proceedings of the 2004 IEEE International Symposium on Spread Spectrum Techniques and Applications, I. Oppermann (ed.), IEEE, New Jersey (IEEE International Symposium on Spread Spectrum Techniques and Applications).

Sharif Mahmoud, S., Hussain, Z. M. and O'Shea, P. J., 2004, ‘Performance of DS-CDMA system in the space-time hyperbolic channel model’, in Conference Proceedings of the IEEE TENCON 2004, E. Leelarasmee (ed.), IEEE, New Jersey (IEEE Tencon - Analog and Digital Techniques in Electrical Engineering).

Singh, V. P., Kumar, D. K., Djuwari, D., Polus, B. I., Fraser, S. F., Hawley, J. A. and Lo Giudice, S. L., 2004, ‘Strategies to identify muscle fatigue from SEMG during cycling’, in Proceedings of the 2004 Intelligent Sensors, Sensor Networks and Information Processing Conference, M. Palaniswami (ed.), IEEE, Melbourne (Intellegent Sensors, Sensor Networks and Information Processing Conference).

Subic, A. J. and Cvetkovic, D., 2004, ‘Modelling of compact fast acting fuel injector solenoids’, in Proceedings of the FISITA 2004 World Automotive Congress, FISITA, Sociedad de Tecnicos de Automocion, Barcelona (FISITA 2004 World Automotive Congress).

Sufi, F. K., Cosic, I. and Fang, J. Q., 2004, ‘XQuery based intelligent search system for genomic data retrieval‘, in Proceedings of the 2004 Intelligent Sensors, Sensor Networks and Information Processing Conference, M Palaniswami et al. (ed.), Causal, Australia (2004 Intelligent Sensors, Sensor Networks and Information Processing Conference).

Suryasaputra, R., Murphy, J., Harris, R. J. and Lloyd-Smith, B., 2004, ‘Dousing hot spots in OSPF networks’, in Proceedings of Australian Telecommunication Networks and Applications Conference, A. Dadej (ed.), Smart Internet Technology CRC, Sydney (Australian Telecommunication Networks and Applications Conference).

Tan, B. K., Mustafa, V. and Kangsanant, T., 2004, ‘Towards emotional agents that improve mental well being of the elderly’, in Proceedings of the International Conference on

57

Page 58: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Computational Intelligence for Modelling Control and Automation, M. Mohammadian (ed.), University of Canberra, Canberra (International Conference on Computational Intelligence for Modelling Control and automation).

Thompson, A. and Hussain, Z. M., 2004, ‘A single-bit resonator’, in Proceedings of the 3rd Workshop on the Internet, Telecommunications and Signal Processing, T. and B. Wysocki (ed.), University of South Australia, Adelaide (Workshop on the Internet, Telecommunications and Signal Processing).

Thompson, A. and Hussain, Z. M., 2004, ‘All digital adaptive sigma-delta modulator’, in Proceedings of the 3rd Workshop on the Internet, Telecommunications and Signal Processing, T. and B. Wysocki (ed.), University of South Australia, Adelaide (Workshop on the Internet, Telecommunications and Signal Processing).

Thompson, A. and Hussain, Z. M., 2004, ‘Digital adaptive error feedback sigma-delta modulation’, in Proceedings of the Australian Telecommunication Networks and Applications Conference 2004, M Zukerman (ed.), University of New South Wales, Sydney (Australian Telecommunication Networks and Applications Conference).

Thompson, A. and Hussain, Z. M., 2004, ‘Performance of a single-bit digital non-coherent baseband BFSK demodulator’, in Proceedings of the 3rd Workshop on the Internet, Telecommunications and Signal Processing, T. and B. Wysocki (ed.), University of South Australia, Adelaide (Workshop on the Internet, Telecommunications and Signal Processing).

Thompson, A., Hussain, Z. M. and O'Shea, P. J., 2004, ‘A single-bit digital non-coherent baseband BFSK demodulator’, in Conference Proceedings of the IEEE TENCON 200, E. Leelarasmee (ed.), IEEE, New Jersey (IEEE Tencon - Analog and Digital Techniques in Electrical Engineering).

Trinchi, A. V., Li, Y. X., Wlodarski, W., Kalantar-Zadeh, K. and Cantalini, C., 2004, ‘Hydrogen sensing by ZnO/SiC based solid state structures’, in Proceedings of the 8th Italian Conference on Sensors and Microsystems, C. Di Natale and A. D’Amico (ed.), World Scientific, Singapore (8th Italian Conference on Sensors and Microsystems).

Venkatachalaiah, S., Harris, R. J. and Murphy, J., 2004, ‘Improving handoff in wireless networks using grey and particle swarm optimisation’, in Proceedings of the International Conference on Computing, Communication and Control Technologies, H. W. Chu et al. (ed.), International Institute of Informatics and Systemics, Orlando, FL (International Conference on Computing, Communication and Control Technologies).

Visagathilagar, Y. S., Rowe, W. S., Mitchell, A., Bennett, G. and Grosser, M., 2004, ‘Investigation of flip chip interconnects for high-speed LiNbO3 modulators’, in Proceedings of the Australian Conference on Optical Fibre Technology 2004, B. Eggleton et al. (ed.), ACOFT/AOS 2004, Canberra (Australian Conference on Optical Fibre Technology).

Visagathilagar, Y. S., Rowe, W. S., Mitchell, A., Bennett, G. and Grosser, M., 2004, ‘Packaging of a high-speed optical modulator using flip chip interconnects’, in Proceeding of the 54th Electronic Components and Technology Conference, P. Thompson (ed.), IEEE, Piscataway (54th Electronic Components and Technology Conference)

Vora, K. D., Holland, A. S., Ghantasala, M. K. and Mitchell, A., 2004, ‘Patterning of SU-8 resist

58

Page 59: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

structures using CF4’, in Proceedings of SPIE - The International Society for Optical Engineering, J.-C. Chiao et al. (ed.), SPIE, Bellingham (SPIE - International Society for Optical Engineering - Device and Process Technologies for MEMS, Microelectronics, and Photonics III).

Wang, L., Giles, A. and Peirce, R., 2004, ‘Abnormality detection of a continuous pan in a sugar mill’, in Proceedings of the Eighth International Conference on Control, Automation, Robotics and Vision, X. Lihua (ed.), IEEE, Kunming (International Conference on Control, Automation, Robotics and Vision).

Yu, X., Han, F., Feng, Y. and Chen, G., 2004, ‘Domain of attraction of hysteresis-series based chaotic attractors’, in Proceedings of Seventh Asia-Pacific Conference on Complex Systems, B. Verma (ed.), Central Queensland University, Rockhampton (Seventh Asia-Pacific Conference on Complex Systems).

Yu, X., Yang, L. and Chen, G., 2004, ‘Periodic discretization behaviours in a bang-bang type switching control system’, in Proceedings of the 5th Asian Control Conference, M. Cantoni (ed.), IEEE, Melbourne (Fifth Asian Control Conference).

Yue, D., Han, Q-L. and Yu, X., 2004, ‘Robust H-inf non-fragile controller design for uncertain descriptor systems with time-varying discrete and distributed delays’, in Proceedings of the Fifth Asian Control Conference, M. Cantoni (ed.), IEEE, Melbourne (Fifth Asian Control Conference).

Zhang, N., Feng, Y. and Yu, X., 2004, ‘Optimization of terminal sliding mode control for two-link flexible manipulators’, in Proceedings of the 30th Annual Conference of IEEE Industrial Electronics Society, S. Yuta (ed.), IEEE, Korea (30th Annual Conference of IEEE Industrial Electronics Society).

Health Sciences

Book Chapters Hempenstall, K., 2004, ‘The importance of effective instruction’, in Introduction of Direct Instruction, Pearson Education, USA, pp. 1-27, ISBN 0-205-37761-0.

Inbakaran, R., Jackson, M. S., and Truong, T. T., 2004, ‘Analysis of tourist expectation and satisfaction: Case study of Australasian tourists in Vietnam’, in Tourist Behaviour: A Psychological Perspective, Kanishka Publishers, New Dehli, pp. 300-330, ISBN 81-7391-643-8.

Jackson, M. S., Inbakaran, R. and Truong, T. T., 2004, ‘Analysis of tourist expectation and satisfaction: Case study of Australasian tourists in Vietnam’, in Tourist Behaviour: A Psychological Perspective, Kanishka Publishers, New Dehli, pp. 300-330, ISBN 81-7391-643-8.

Jackson, M. S., Inbakaran, R. and Truong, T-H., 2004, ‘Social perceptions of tourism’, in Tourist behaviour: A Psychological Perspective, Kanishka Publishers, Distributors, New Dehli, pp. 150-166, ISBN 81-7391-643-8.

Johnstone, M-J., 2004, ‘Leadership in nursing and health care domains’, in Nursing Leadership, Churchill Livingstone, Sydney, pp. 89-102, ISBN 0-7295-3741-2.

Wilson, P. H., 2004, ‘Visuospatial, kinesthetic, visuomotor integration and visuoconstructional

59

Page 60: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

disorders. Implications for motor development’, in Developmental Motor Disorders A Neuropsychological Perspective, The Guilford Press, New York, pp. 291-312, ISBN 1-59385-064-6.

Journal Articles Abdul-latif, A. A., Cosic, I., Kumar, D. K., Polus, B., Pah, N., and Djuwari, D., 2004, ‘EEG coherence changes between right and left motor cortical areas during voluntary muscular contraction’, in Australasian Physical and Engineering Sciences in Medicine, Australasian College of Physical Scientists and Engineers in Medicine, vol 27, pp. 185-189, ISSN 0158-9938.

Arbuckle, C. and Little, E., 2004, ‘Teachers' perceptions and management of disruptive classroom behaviour during the middle years, (years five to nine)’, in Australian Journal of Educational and Developmental Psychology, University of Newcastle, Newcastle, vol. 4, pp. 59-70, ISSN 1446-5442.

Avant, K., Edgecombe, G. A., Griffin, P. and Corneille, K., 2004, ‘Development of the school entrant health questionnaire for assessing primary school children aged 5-7’, in Contemporary Nurse, EContent Management, Australia, vol. 18, pp. 177-187, ISSN 1037-6178.

Boucher, C., Smyth, A. and Johnstone, M.-J., 2004, ‘Creating collaborative spaces: The pleasures and perils of doing multi-disciplinary, multi-partner qualitative research’, in Journal of Higher Education and Policy Management, Carfax Publishing, vol. 26, pp. 419-428, ISSN 1360-080X.

Bournes, D. A., Schmidt Bunkers, S., and Welch, T., 2004, ‘Human becoming: Scope and challenges’, in Nursing Quarterly Science, Sage Publications, USA, vol. 17, pp. 227-232, ISSN 0894-3184.

Chhetri, P., Arrowsmith, C. and Jackson, M., 2004, ‘Determining hiking experiences in nature-based tourist destinations’, in Tourism Management, vol. 25, pp. 31-43, ISSN 0261-5177.

Cohen, M., 2004, ‘CAM practitioners and "regular" doctors: Is intergration possible?’, in Medical Journal of Australia, Australasian Medical Publishing Company, Australia, vol. 180, pp. 645-646, ISSN 0025-729x.

Cohen, M., 2004, ‘Electromagnetic radiation and health’, in Journal of Complementary Medicine, Optimal Health Communications, Melbourne, vol. 3, pp. 52-55, ISSN 1446-8263.

Francis, A. J. and Papageorgiou, P., 2004, ‘Expressed emotion in Greek versus Anglo-Saxon families of individuals with schizophrenia’, in Australian Psychologist, Taylor and Francis, Australia, vol. 39, pp. 172-177, 2, ISSN 0005-0067.

Hempenstall, K., 2004, ‘Beyond phonemic awarness: What educational role for the other phonological processes?’, in Australian Journal of Learning Disabilities, Learning Difficulties Australia, Australia, vol. 9, pp. 3-15, 1, ISSN 1324-8928.

Hempenstall, K., 2004, ‘Education for language minority students: Recent events’, in Direct Instruction News, Association for Direct Instruction, Oregon, vol. 3, pp. 10-23, ISSN 1540-0026.

Hempenstall, K., 2004, ‘How might a stage model of reading development be helpful in the classroom?’, in Educational Psychology, Carfax Publishing, UK, vol. 24, pp. 727-751, ISSN

60

Page 61: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

0144-3410.

Inbakaran, R., Jackson, M. S. and Truong, T-H., 2004, ‘Do cultural and national differences distinguish resort clientele?: A case study of Australian domestic and overseas resort tourists’, in Journal of Applied Economics and Management, Institute of Economics and Finance, Bundelkhand University, India, vol. 2, pp. 89-110, 0972-8937.

Johnstone, M,-J., 2004, ‘Patient safety, ethics and whistleblowing: a nursing response to the events at the Campbelltown and Camden hospitals’, in Australian Health Review, Australasian Medical Publishing Company, Australia, vol. 28, pp. 13-19, ISSN 0156-5788.

Johnstone, M.-J., Da Costa, C. and Turale, S., 2004, ‘Registered and enrolled nurses' experiences of ethical issues in nursing practice’, in Australian Journal of Advanced Nursing, Australian Nursing Federation, Australia, vol. 22, pp. 24-30, ISSN 0813-0531.

Kanitsaki, O., 2004, ‘Nursing and evidence-based practice’, in Macau Journal of Nursing, Kiang Wu Nursing College of Macau, Macau, vol. 3, pp. 32-36, 1, ISSN 1681-1534.

Karagiannis, J., Rand, M. J. and Li, C. G., 2004, ‘Role of gap junctions in endothelium-derived hyperpoalarizing factor-mediated vasodilation in rat renal artery’, in Acta Pharmacologica Sinica, Shanghai Institute of Materia Medica, China, vol. 25, pp. 1031-1037, ISSN 1671-4083.

Kos, J. M. and Richdale, A., 2004, ‘The history of attention-deficit/hyperactivity disorder’, in Australian Journal of Learning Disabilities, Learning Difficulties Australia, Melbourne, vol. 9, pp. 22-24, ISSN 1324-8928.

Kos, J. M., Richdale, A. and Jackson, M. S., 2004, ‘Knowledge about attention-deficit/hyperactivity disorder’, in Psychology in the Schools, Wiley Interscience, New York, vol. 41, pp. 517-526, ISSN 0033-3085.

Lancaster, S. and Smith, D. I., 2004, ‘Psychology down under: Career and training decisions of Australian psychology graduates’, in North American Journal of Psychology, USA, vol. 6, pp. 71-84, ISSN 1527-7143.

Liang, H, Xue, C. C. and Li, C. G., 2004, ‘Regression of squamous cell carcinoma of the lung by chinese herbal medicine: A case with an 8-year follow-up’, in Lung Cancer, Elsevier, Amsterdam, vol. 43, pp. 355-360, ISSN 0169-5002.

Lucas, K., Polus, B. I. and Rich, P., 2004, ‘Latent myofascial trigger points: Their effects on muscle activation and movement efficiency’, in Journal of Bodywork and Movement Therapies, Churchill Livingstone, UK, vol. 8, pp. 160-166, ISSN 1360-8592.

Niblo, D. M. and Jackson, M. S., 2004, ‘Model for combining the qualitative emic approach with the quantitative etic approach’, in Australian Psychologist, Taylor and Francis, Australia, vol. 39, pp. 127-133, ISSN 0005-0067.

Rees, G., Fry, A., Cull, A. and Sutton, S., 2004, ‘Illness perceptions and distress in women at increased risk of breast cancer’, in Psychology and Health, Taylor and Francis, UK, vol. 19, pp. 749-765, ISSN 0887-L0446.

Rees, G., Huby, G., McDade, L. and McKechnie, L., 2004, ‘Joint working in community mental

61

Page 62: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

health teams: Implementation of an integrated care pathway’, in Health and Social Care in the Community, Blackwell Publishing, UK, vol. 12, pp. 527-536, ISSN 0966-0410.

Robinson, A. M. and Richdale, A., 2004, ‘Sleep problems in children with an intellectual disability: Parental perceptions of sleep problems, and views of treatment effectiveness’, in Child: Care, Health and Development, Blackwell Publishing, UK, vol. 30, pp. 139-150, ISSN 0305-1862.

Rose, L. and Bucknall, T., 2004, ‘Staff perceptions on the use of a sedation protocol in the intensive care setting’, in Australian Critical Care, Australian College of Critical Care Nurses, Australia, vol. 17, pp. 151-159, ISSN 1036-7314.

Thomas, T. N., 2004, ‘Psychology in culturally diverse society’, in Australian Psychologist, Taylor and Francis, Australia, vol. 39, pp. 103-106, ISSN 0005-0067.

Vindigni, D., Griffen, D., Perkins, J., Da Costa, C. and Parkinson, L., 2004, ‘Prevalence of musculoskeletal conditions, associated pain and disability and the barriers to managing these conditions in a rural, Australian Aboriginal community’, in Rural and Remote Health, Deakin University, Waurn Ponds, Vic, vol. 4, pp. 1-13, ISSN 1445-6354.

Walsh, M. J., Polus, B. I. and Webb, M. N., 2004, ‘The role of cervical spine in balance and risk of falling in the elderly’, in Chiropractic Journal of Australia, Chiropractors' Association of Australia, Australia, vol. 34, pp. 19-22, 1, ISSN 1036-0913.

Welch, T., 2004, ‘The researcher's reflections on the research process’, in Nursing Science Quarterly, Sage Publications, USA, vol. 17, pp. 201-207, ISSN 0894-3184.

Wilson, P. H., Maruff, P., Butson, M. L., Williams, J. L., Lum, J. and Thomas, P. R., 2004, ‘Internal representation of movement in children with developmental coordination disorder: A mental rotation task’, in Developmental Medicine and Child Neurology, Mac Keith Press, UK, vol. 46, pp. 754-759, ISSN 0012-1622.

Xue, C. C., Dong, L., Polus, B. I., English, R., Zheng, Z., Da Costa, C., Li, C. G. and Story, D. F., 2004, ‘Electroacupuncture for tension-type headache on distal acupoints only: A randomized, controlled, crossover trial’, in Headache, Blackwell Publishing, Malden, MA, vol. 44, pp. 333-341, ISSN 0017-8748.

Xue, C. C., Hugel, H. M., Li, C. G. and Story, D. F., 2004, ‘Efficacy, chemistry and pharmacology of Chinese herbal medicine for allergic rhinitis’, in Current Medicinal Chemistry, Bentham Science, Netherlands, vol. 11, pp. 1403-1421, ISSN 0929-8673.

Conference Publications Abdul-Latif, A. A., Cosic, I., Kumar, D. K., Polus, B. I. and Da Costa, C., 2004, ‘Power changes of EEG signals associated with muscle fatigue: The root mean square analysis of EEG bands’, in Proceedings of 2004 Intelligent Sensors, Sensor Networks and Information Processing Conference, J. Rama (ed.), IEEE, USA (2004 Intelligent Sensors, Sensors Networks and Information Processing Conference).

Abdul-latif, A. A., Cosic, I., Kumar, D. K., Polus, B. and Djuwari, D., 2004, ‘Corticomuscular

62

Page 63: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

coherence after muscle fatigue’ in Biomedical Engineering, B. Tilg (ed.), ACTA Press, Canada (Biomedical Engineering).

Costa, A. and Thomas, T. N., 2004, ‘Factors related to psychopathology amongst Greek-Cypriot refugees’, in Psychological Science in Action, M. Katsikitis (ed.), Australian Psychological Society, Melbourne (39th Australian Psychological Society Conference).

Dowling, N., Smith, D. I. and Thomas, T. N., 2004, ‘The efficacy of a cognitive-behavioural approach in the treatment of female pathological electronic machine gambling’, in Psychological Science in Action, M. Katsikitis (ed.), Australian Psychological Society, Melbourne (The 39th Australian Psychological Society Conference).

Hardstone, G., Hartswood, M. J., Procter, R., Rees, G., Slack, R. and Voss, A., 2004, ‘Supporting informality: team working and intergrated care records’, in Conference Proceedings of Computer Supported Cooperative Work, J. Herbsieb and G. Olson (ed.), Association for Computer Machinery, New York (Computer Supported Cooperative Work 2004).

Inbakaran, R. and Jackson, M. S., 2004, ‘A multivariate analysis of resident attitudes towards tourism development in regional Victoria’, in Creating Tourism Knowledge, C. Cooper et al. (ed.), University of Queensland, Brisbane (CAUTHE).

Inbakaran, R., Jackson, M. S. and Chhetri, P., 2004, ‘Segmentation of resort tourists: A study on profile differences in selection, satisfaction, opinion and preferences’, in Tourism Research: Advances and Applications, K. A. Smith and C. Schott (ed.), Victoria University of Wellington, NZ (New Zealand Tourism and Hospitality Research Conference).

Inbakaran, R., Jackson, M. S. and Chhetri, P., 2004, ‘Spatial representation of resident attitudes in tourism product regions of Victoria, Australia’, in Tourism Research: Advances and Applications, K. A. Smith and C. Schott (ed.), Victoria University of Wellington, NZ (New Zealand Tourism and Hospitality Research Conference).

Jackson, M. S. and Inbakaran, R., 2004, ‘Community residents' attitudes towards tourism development: Do attitudes predict intention to act?’, in Tourism Research: Advances and Applications, K. A. Smith and C.Schott (ed.), Victoria University of Wellington, NZ (New Zealand Tourism and Hospitality Research Conference).

Jackson, M. S. and Inbakaran, R., 2004, ‘Defining the tourist: Who? Does what? To whom? And where?’, in Creating Tourism Knowledge, C. Cooper et al. (ed.), University of Queensland, Brisbane (CAUTHE).

Ragupathy, S., Kumar, D. K. and Polus, B. I., 2004, ‘Relationship of magnitude of electromyogram of the lumbar muscle to static posture’, in Proceedings of the 26th Annual International Conference of the IEEE Engineering Medicine and Biology Society, Z. P. Liang (ed.), IEEE, Piscataway (IEEE – Engineering Medicine and Biology Society).

Ragupathy, S., Kumar, D. K., Polus, B. I. and Kamei, K., 2004, ‘Electrocardiogram removal from electromyogram of the lumbar muscles’, in Proceedings of the 26th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, Z. P. Liang (ed.), IEEE, Piscataway (IEEE – Engineering Medicine and Biology Society).

63

Page 64: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Schmierer, C., and Jackson, M. S., 2004, ‘Tourist ill health: What to do with the data?’, in Tourism Research: Advances and Applications, K. A. Smith and C. Schott (ed.), Victoria University of Wellington, NZ (New Zealand Tourism and Hospitality Research Conference).

Singh, V. P., Kumar, D. K., Djuwari, D., Polus, B. I., Fraser, S. F. and Hawley, J. A., 2004, ‘Variation of SEMG during sprint cycling’, in Proceedings of the 2004 Intelligent Sensors, Sensor Networks and Information Processing Conference, M. Palaniswami (ed.), IEEE, Melbourne (Intelligent Sensors, Sensor Networks and Information Processing Conference).

Singh, V. P., Kumar, D. K., Djuwari, D., Polus, B. I., Fraser, S. F., Hawley, J. A. and Lo Giudice, S. L., 2004, ‘Strategies to identify muscle fatigue from SEMG during cycling’, in Proceedings of the 2004 Intelligent Sensors, Sensor Networks and Information Processing Conference, M. Palaniswami (ed.), IEEE, Melbourne (Intellegent Sensors, Sensor Networks and Information Processing Conference).

Tang, H., Tu, J. Y., Li, H. F., Au-Hijlleh, B., Xue, C. and Li, C. G., 2004. ‘Dynamic analysis of airflow features in a 3D real-anatomical geometry of the human nasal cavity’, in Proceedings of the Australasian Fluid Mechanics Conference, M. Behnia, W. Lin et al. (ed.), University of Sydney (15th Australasian Fluid Mechanics Conference).

Tu, J., Abu-Hijleh, B., Xue, C. C. and Li, C. G., 2004, ‘CFD simulation of air/particle flow in the human nasal cavity’, in Proceedings of Fifth International Conference on Multiphase Flow, Y.Matsumoto et al. (ed.), ICMF, Yokohama (Fifth International Conference on Multiphase Flow).

Wade, E. L. and Reece, J. C., 2004, ‘Psychosocial predictors of children's involvement in bullying at school’, in Psychological Science in Action, M. Katsikitis (ed.), Australian Psychological Society, Melbourne (39th Australian Psychological Society Conference).

Yang, W., Allan, G. L., Xue, C. C., Frampton, K. M. and Sun, I., 2004, ‘Creating innovative educational technology as an outcome from software engineering education’, in International Conference on Computers in Education 2004: A Conference of the Asia-Pacific Society for Computers in Education (APSCE), E. McKay (ed.), Common Ground Publishing, Melbourne (12th International Conference on Computers in Education).

Zheng, Z., Yang, W., Mansu, S., Xue, C. C. and Li, C., 2004, ‘Teaching evidence-based Chinese medicine online: The use of electronic journal club’, in Stepping Further onto the World Stage: Traditional Chinese Medicine, Organising Committee (ed.), Nanjing University, Nanjing (International Forum on Traditional Chinese Medicine, and the Second World Congress on Chinese Medicine).

Mathematical and Geospatial Sciences

Book Chapters De Silva, B. and Mukhopadhyay, N., 2004, ‘Kernel density estimation of wool fiber diameter’, in Applied Sequential Methodologies: Real-World Examples with Data Analysis, Marcel Dekker, New York, pp. 141-170, ISBN 0-8247-5395.

Handmer, J., 2004, ‘Global flooding’, in International Perspectives on Natural Disasters:

64

Page 65: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Occurrence, Mitigation, and Consequences, Kluwer, Dordrecht, pp. 87-106, ISBN 1-4020-2850-4.

Pettit, C., Nelson, A. D. and Cartwright, W. E., 2004, ‘Using on-line geographical visualisation tools to improve land use decision-making with a bottom-up community participatory approach’, in Recent Advances in Design and Decision Support Systems in Architecture and Urban Planning, Kluwer Academic, Dortrecht, pp. 53-68, ISBN 1-4020-2408-8.

Journal Articles Aliu, E. and Shepherd, J., 2004, ‘Overlapping layers in a gas lubrication problem’, in Journal of Computational and Applied Mathematics, Elsevier, Amsterdam, vol. 166, pp. 1-12, ISSN 0377-0427.

Aliu, E., Shepherd, J. and Connell, H. J., 2004, ‘Multiscaling analysis of a nonlinear boundary value problem in lubrication theory’, in International Journal of Applied Mechanics and Engineering, Technical University Press Zielona Gora, Poland, vol. 9, pp. 455-470, ISSN 1425-1655.

Bedford, A. and Zeephongsekul, P., 2004, ‘Quality of service in networks with prioritised traffic involving the multi-priority dual queue’, in International Journal of Computational Engineering Science, Imperial College Press, London, vol. 5, pp. 303-313, ISSN 1465-8763.

Blyth, W. F., May, R. L. and Widyaningsih, P., 2004, ‘Volterra integral equations solved in Fredholm form using Walsh functions’, in ANZIAM Journal, Australian Mathematical Society, Australia, vol. 45, pp. 269-282, ISSN 1446-8735.

Boonyanunta, N. and Zeephongsekul, P., 2004, ‘Predicting the relationship between the size of training sample and the predictive power of classifiers’, in Lecture Notes in Artificial Intelligence, Springer, Berlin, vol. 3215, pp. 529-535, ISSN 0302-9743.

Cartwright, W. E., Miller, S. and Pettit, C., 2004, ‘Geographical visualization: Past, present and future development’, in Journal of Spatial Science, Spatial Science Institute Australia, Canberra, vol. 49, pp. 25-36, ISSN 1449-8596.

Chhetri, P., Arrowsmith, C. A. and Jackson, M. S., 2004, ‘Determining hiking experiences in nature-based tourist destinations’, in Tourist Management, Pergamon, UK, vol. 25, pp. 31-43, ISSN 0261-5177.

Eva, H. D., Belward, A. S., Evaristo, M. E., Di Bella, C. M., Gond, V., Jones, S. D., Sgrenzaroli, M. and Fritz, S., 2004, ‘A land cover map of South America’, in Global Change Biology, Blackwell Publishing, UK, vol. 10, pp. 731-744, ISSN 1365-1013.

Germanchis, T. A., Pettit, C. and Cartwright, W. E., 2004, ‘Building a three-dimensional geospatial virtual environment on computer gaming technology’, in Journal of Spatial Science, Spatial Science Institute Australia, Canberra, vol. 49, pp. 89-95, ISSN 1449-8596.

Handmer, J. and Hillman, M., 2004, ‘Economic and financial recovery from disaster’, in Australian Journal of Emergency Management, Emergency Management Australia, Canberra, vol. 19, pp. 44-50, ISSN 1324-1540.

Handmer, J. and Monson, R., 2004, ‘Does a rights based approach make a difference? The role of

65

Page 66: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

public law in vulnerability reduction’, in International Journal of Mass Emergencies and Disasters, International Research Committee on Disasters, Jacksonville, vol. 22, pp. 43-59, ISSN 0280-7270.

Horadam, K. J., 2004, ‘The shift action on 2-cocycles’, in Journal of Pure and Applied Algebra, Elsevier, Amsterdam, vol. 188, pp. 127-143, ISSN 0022-4049.

Johnstone, M.-J., Da Costa, C. and Turale, S., 2004, ‘Registered and enrolled nurses' experiences of ethical issues in nursing practice’, in Australian Journal of Advanced Nursing, Australian Nursing Federation, Australia, vol. 22, pp. 24-30, ISSN 0813-0531.

Jones, S. D., Garvey, M. F. and Hunter, G. J., 2004, ‘Where's the fire? Quantifying uncertainty in a wildfire threat model’, in International Journal of Wildland Fire, CSIRO Publishing, Melbourne, vol. 13, pp. 17-25, ISSN 1049-8001.

Li, Y., Zhang, K. F., Roberts, C. and Murata, M., 2004, ‘On-the-fly GPS-based attitude determination using single- and double-differenced carrier phase measurements’, in GPS Solutions, Springer, Berlin, vol. 8, pp. 93-102, ISSN 1080-5370.

Monson, R., 2004, ‘The 1998 floods in the tambo valley’, in International Journal of Mass Emergencies and Disasters, International Research Committee on Disasters, Jacksonville, vol. 22, pp. 61-86, ISSN 0280-7270.

Nelson, A. D. and Pettit, C., 2004, ‘Developing an interactive web based public participatory planning support system for natural resource management’, in Journal of Spatial Science, Spatial Sciences Institute Australia & the Mapping Sciences Institute, Australia, vol. 49, pp. 61-70, ISSN 1449-8596.

Nelson, A. D. and Pettit, C., 2004, ‘Effective community engagement for sustainability: Wombat Community Forest Management Case Study’, in Australian Geographer, Carfax Publishing, Australia, vol.35, pp. 301-315, ISSN 0004-9182.

Nyblom, M. A., 2004, ‘An extension of a result of Sierpinski’, in Journal of Number Theory, Elsevier Science, San Diego, vol. 105, pp. 49-59, ISSN 00022-314X.

Nyblom, M. A., 2004, ‘On the construction of a family of transcendental valued infinite products’, in Fibonacci Quarterly, Fibonacci Association, Aurora, South Dakota, vol. 42, pp. 353-358, ISSN 0015-0517.

Penesis, I., Shepherd, J. and Connell, H. J., 2004, ‘The pressure field in the gas-lubricated step slider bearing’, in ANZIAM Journal, Australian Mathematics Publication Association, Canberra, vol. 45, pp. 423-442, ISSN 1446-1811.

Pinnawala Ralalage, N. and Rao, A., 2004, ‘Cocyclic simplex codes of type alpha over Z4 and Z2s’, in IEEE Transactions on Information Theory, IEEE, Piscataway, NJ, vol. 50, pp. 2165-2169, ISSN 0018-9448.

Seynat, C., Kealy, A. N. and Zhang, K. F., 2004, ‘A performance analysis of future global navigation satellite systems’, in Journal of Global Positioning Systems, CPGPS, Calgary, Canada, vol. 3, pp. 154-163, ISSN 1446-3156.

66

Page 67: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Vindigni, D., Griffen, D., Perkins, J., Da Costa, C. and Parkinson, L., 2004, ‘Prevalence of musculoskeletal conditions, associated pain and disability and the barriers to managing these conditions in a rural, Australian Aboriginal community’, in Rural and Remote Health, Deakin University, Waurn Ponds, Vic, vol. 4, pp. 1-13, ISSN 1445-6354.

Watson, D., Arrowsmith, C. A. and Goudey, R. W., 2004, ‘Water availability: A regional water quality problem’, in International Journal of River Basin Management, IAHR and INBO, Madrid, vol. 1, pp. 321-330, ISSN 1571-5124.

Wealands, K. V., Cartwright, W. E. and Miller, S., 2004, ‘Exploring the usefulness of cartographic representations for location-based services in an Australian context’, in Journal of Spatial Science, Spatial Sciences Institute Australia, Canberra, vol. 49, pp. 71-87, ISSN 1449-8596.

Whittaker, J. W. and Mercer, D., 2004, ‘The Victorian Bushfires of 2002-03 and the politics of blame: A discourse analysis’, in Australian Geographer, Carfax Publishing, UK, vol. 35, pp. 259-287, ISSN 0004-9182.

Xue, C. C., Dong, L., Polus, B. I., English, R., Zheng, Z., Da Costa, C., Li, C. G. and Story, D. F., 2004, ‘Electroacupuncture for tension-type headache on distal acupoints only: A randomized, controlled, crossover trial’, in Headache, Blackwell Publishing, Malden, MA, vol. 44, pp. 333-341, ISSN 0017-8748.

Zhang, K. F. and Feathersone, W. E., 2004, ‘Investigation of the roughness of the Australian gravity field using statistical, graphical, fractal and Fourier power spectrum techniques’, in Survey Review, Commonwealth Association of Surveying and Land Economy, UK, vol. 37, pp. 520-530, ISSN 0039-6265.

Zhang, K. F., Grenfell, R., Deakin, R. E., Li, Y., Zhang, J., Cameron, W. N. and Silcock, D., 2004, ‘GNSS for sports - Sailing and rowing perspectives’, in Journal of Global Positioning Systems, CPGPS, Calgary, Canada, vol. 3, pp. 144-153, ISSN 1446-3156.

Conference Publications Abdollahian, M. A. and Foroughi, R., 2004, ‘Optimal statistical model for forecasting air quality data’, in Proceedings of the International Conference on Mathematics and Engineering Techniques in Medicine and Biological Sciences, F. Valafar and H. Valafar (ed.), CSREA Press, USA (International Conference on Mathematics and Engineering Techniques in Medicine and Biological Sciences).

Abdul-Latif, A., Cosic, I., Kumar, D. K., Polus, B. I. and Da Costa, C., 2004, ‘Power changes of EEG signals associated with muscle fatigue: The root mean square analysis of EEG bands’, in Proceedings of 2004 Intelligent Sensors, Sensor Networks and Information Processing Conference, J. Rama (ed.), IEEE, USA (2004 Intelligent Sensors, Sensors Networks and Information Processing Conference).

Bedford, A., 2004, ‘Predicting women's world cup handball using optimised ratings models’, in Proceedings of the Seventh Australasian Conference on Mathematics and Computers in Sport, R. H. Morton and S. Ganesalingam (ed.), Massey University, Palmerston North, NZ (Seventh Australasian Conference on Mathematics and Computers in Sport).

Bedford, A. and Da Costa, C., 2004, ‘A ratings based analysis of Oceania's road to the world

67

Page 68: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

cup’, in Proceedings of the Seventh Australasian Conference on Mathematics and Computers in Sport, R. H. Morton and S. Ganesalingam (ed.), Massey University, Palmerston North, NZ (Seventh Australasian Conference on Mathematics and Computers in Sport).

Blyth, B. F., 2004, ‘Animated faces using Maple’, in Proceedings of the Conference on Integrating Technology in the Mathematical Sciences, Y. A. Hasan et al. (ed.), Universiti Sains, Penang ( Conference on Integrating Technology in the Mathematical Sciences).

Blyth, W. F. and Labovic, A., 2004, ‘Assessment of e-mathematics with Maple’, in Proceedings of the Ninth Asian Technology Conference in Mathematics, W.-C. Yang et al. (ed.), ATCM, Blacksburg, VA (Ninth Asian Technology Conference in Mathematics).

Boztas, S., Rao, A., Maru, B. and Tran, T., 2004, ‘A graphical simulator for the cryptanalysis of block ciphers’, in Proceedings of Fifth International Conference on Information Technology Based Higher Education and Training, Y. Akpinar (ed.), IEEE, USA (Fifth International Conference on Information Technology Based on Higher Education and Training).

Cartwright, W. E., 2004, ‘Delivering education in cartography: Content, collaboration and communication’, in Proceedings of GeoCart'2003 National Cartographic Conference, I. Drecki (ed.), New Zealand Cartographic Society, New Zealand (GeoCart'2003: Accessible New Zealand; Capitalising on Contemporary Technologies).

Cartwright, W. E., 2004, ‘Exploring and discovering geographical facts using geographical storytelling’, in Proceedings of Image, Text and Sound International Conference, P. Anastasiou and K. Trist (ed.), RMIT Publishing, Melbourne (Image, Text and Sound International Conference).

Dimopoulos, P., Zeephongsekul, P. and Tari, Z., 2004, ‘Modeling the burstiness of TCP’, in Proceedings of the 12th IEEE International Symposium on Modelling Analysis and Simulation of Computer and Telecommunication Systems, D. DeGroot and P. Harrison (ed.), IEEE, Los Alamitos, CA (12th IEEE International Symposium on Modelling Analysis and Simulation of Computer and Telecommunication Systems).

Ding, Y. and Rieger, N. F., 2004, ‘Recent studies of gear tooth spall formation’, in Proceedings of the 11th World Congress in Mechanism and Machine Science, T. Huang (ed.), China Machine Press, China (11th World Congress in Mechanism and Machine Science).

Eberhard, A. C. and Wenczel, R., 2004, ‘A study of smooth optimality conditions in nonsmooth analysis’, in Proceedings of the Sixth International Conference on Optimization: Techniques and Applications (ICOTA6 2004), A. Rubinov and M. Sniedovich (ed.), University of Ballarat, Ballarat (Sixth International Conference on Optimization: Techniques and Applications).

Ekberg, M., 2004, ‘Are risk society risks exceptional?’, in Proceedings of TASA 2004 Conference, K. Richmond (ed.), Australian Sociological Association, Australia (Australian Sociological Association Conference).

Fernandez, G. and FitzGerald, G., 2004, ‘A bold mathematics course to support a new civil infrastructure program’, in Proceedings of the Ninth Asian Technology Conference in Mathematics, W.-C. Yang et al. (ed.), ATCM, Blacksburg, VA (Ninth Asian Technology Conference in Mathematics).

68

Page 69: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Fernandez, G. and FitzGerald, G., 2004, ‘Towards an automated web tutor environment’, in International Conference on Computers in Education 2004: A Conference of the Asia-Pacific Society for Computers in Education (APSCE), E. McKay (ed.), Common Ground Publishing, Melbourne (12th International Conference on Computers in Education).

Grundy, I. and Stacey, A., 2004, ‘Particle swarm optimization with combined mutation and hill climbing’, in Proceedings of the Seventh Asia-Pacific Complex Systems Conference, R. Stonier et al. (ed.), Central Queensland University, Rockhampton (Seventh Asia-Pacific Complex Systems Conference).

Hill, R. D., 2004, ‘Exact solutions to a problem in optimal robust control’, in Proceedings of the Sixth International Conference on Optimization: Techniques and Applications (ICOTA6 2004), A. Rubinov and M. Sniedovich (ed.), University of Ballarat, Ballarat (Sixth International Conference on Optimization: Techniques and Applications).

Hu, Y., Zhang, K. F. and Liu, G-J., 2004, ‘An investigation of deformation monitoring and analysis using continuously operating GPS reference station network’, in Progress in Environmental and Engineering Geophysics, C. Chen and J. Xia (ed.), Science Press, Monmouth Junction, NJ (International Conference on Environmental and Engineering Geophysics).

Nanthakumar, A. and De Silva, B., 2004, ‘Some preliminary investigations on piecewise fixed-width confidence internal estimation of process capability index Cpm’, in Proceedings of the International Sri Lankan Statistical Conference: Visions of Futuristic Methodologies, B. M. de Silva and N. Mukhopadhyay (ed.), University of Peradeniya, Sri Lanka (International Sri Lankan Statistical Conference).

Nelson, A. D., Berry, M. J., Cartwright, W. E. and Pettit, C., 2004, ‘Direct governance: The challenges of local public participatory planning support systems’, in Community Development Human Rights and the Grassroots: Conference Proceedings, K. Brown et al. (ed.), Deakin University, Geelong (Conference on Community Development Human Rights and the Grassroots).

Pettit, C., More, G., Cartwright, W. E. and Burry, J., 2004, ‘Synthesizing spatial, visual and acoustic city information for better understanding and navigation’, in Proceedings of GeoCart'2003 National Cartographic Conference, I. Drecki (ed.), New Zealand Cartographic Society, New Zealand (GeoCart'03: Accessible New Zealand; Capitalising on Contemporary Technologies).

Pham, H., Hill, R. D. and Bucco, D., 2004, ‘Limitations of performance of a missile homing system’, in Proceedings of the Fifth Asian Control Conference, R. Evans and I. Mareels (ed.), University of Melbourne, Melbourne (Fifth Asian Control Conference).

Rademakers, N. G., Akmeliawati, R., Hill, R. D., Bil, C. and Nijmeijer, H., 2004, ‘Modelling and gain scheduled control of a tailless fighter’, in Proceedings of the Fifth Asian Control Conference, R. Evans and I. Mareels (ed.), University of Melbourne, Melbourne (Fifth Asian Control Conference).

Rieger, N. F. and Ding, Y., 2004, ‘Prediction of sub-surface crack and spall formation on spur gear teeth’, in Proceedings of the 11th World Congress in Mechanism and Machine Science, T. Huang (ed.), China Machine Press, China (11th World Congress in Mechanism and Machine Science).

69

Page 70: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Siderov, K. and Ainsworth, N., 2004, ‘Invasion of bridal creeper (Asparagus asparagoides) in a remnant vegetation patch: Methodology and initial results’, in Weed Management: Balancing People, Planet, Profit, B. M. Sindel and S. B. Johnson (ed.), Weeds Society of NSW, Sydney (14th Australian Weeds Conference).

Zeephongsekul, P. and Bedford, A., 2004, ‘A matrix-algorithmic approach to solving a preemptive priority queue with finite buffer’, in Proceedings of the International Sri Lankan Statistical Conference: Visions of Futuristic Methodologies, B. M. de Silva and N. Mukhopadhyay (ed.), University of Peradeniya, Sri Lanka (International Sri Lankan Statistical Conference).

Medical Sciences

Book Chapter Donohue, D. C., 2004, ‘Safety of novel probiotic bacteria’, in Lactic Acid Bacteria: Microbiological and Functional Effects, Marcel Dekker , New York, pp. 531-546, ISBN 0-8247-5332-1.

Triggle, C. R., Ding, H., Ng, E. S. M and Ellis, A., 2004, ‘Synthesis and metabolism, Tissue Stores, and the relationship of endothelium-derived nitric oxide to endothelium-dependent hyperpolarization’, in Signal Transduction and the Gasotransmitters, Humana Press, Totowa, New Jersey, pp59-94, ISBN 1-59259-806-4.

Journal Articles Ackerly, T., Geso, M., O'Keefe, G. O. and Smith, R., 2004, ‘Stereotactic radiosurgery planning with ictal SPECT images’, in Australasian Physical and Engineering Sciences in Medicine, Australasian College of Physical Scientists and Engineers Sciences in Medicine, Australia, vol. 27, pp. 136-147, ISSN 0158-9938.

Arkinstall, M. J., Bruce, C. R., Clark, S., Rickards, C. A., Burke, L. and Hawley, J. A., 2004, ‘Regulation of fuel metabolism by pre-exercise muscle glycogen content and exercise intensity’, in Journal of Applied Physiology, American Physiological Society, USA, vol. 97, pp. 2275-2283, ISSN 8750-7587.

Arkinstall, M. J., Hawley, J. A. and Nikopoulos, V., 2004, ‘Reduced neuromuscular activity with carbohydrate ingestion during constant load cycling’, in International Journal of Sport Nutrition and Exercise Metabolism, Human Kinetics Publishers, United States, vol. 14, pp. 161-170, ISSN 1526-484x.

Arkinstall, M. J., Tunstall, R. J., Cameron-Smith, D. and Hawley, J. A., 2004, ‘Regulation of metabolic genes in human skeletal muscle with short-term exercise and diet manipulation’, in American Journal of Physiology: Endocrinology and Metabolism, American Physiological Society, USA, vol. 287, pp. 25-31, ISSN 0193-1849.

Bolotin, H. H., 2004, ‘The significant effects of bone structure on inherent patient-specific DXA in vivo bone mineral density measurement inaccuracies’, in Medical Physics, American Association of Physicists in Medicine, USA, vol. 31, pp. 774-788, ISSN 0094-2405.

70

Page 71: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Bruce, C. R. and Hawley, J. A., 2004, ‘Improvements in insulin sensitivity with aerobic exercise training: A lipocentric approach to the problem’, in Medicine and Science in Sports and Exercise, Lippincott Williams and Wilkins, USA, vol. 36, pp. 1196-1201, ISSN 0195-9131.

Bruce, C. R., Cooney, G. J., Hawley, J. A. and Kriketos, A. D., 2004, ‘Disassociation of muscle triglyceride content and insulin sensitivity after exercise training in patients with Type 2 diabetes’, in Diabetologia, Springer, Germany, vol. 47, pp. 23-30, ISSN 0012-186X.

Bruce, C. R., Hawley, J. A., Lee, J. S. and Pedersen, B. K., 2004, ‘Postexercise muscle triacylglycerol and glycogen metabolism in obese insulin-resistant Zucker rats’, in Obesity Research, North American Association for the Study of Obesity, United States, vol. 12, pp. 1158-1165, ISSN 1071-7323.

Bruce, C. R., Howlett, K., Hawley, J. A., Cameron-Smith, D., Wadley, G. D., Konstantopoulos, N. and Macaulay, S., 2004, ‘The effect of insulin and exercise on c-Cbl protein abundance and phosphorylation in insulin resistant skeletal muscle in lean and obese Zucker rats’, in Diabetologia, Springer, Germany, vol. 47, pp. 412-419, ISSN 0012-186X.

Carey, A. L. and Febbraio, M. A., 2004, ‘Interleukin-6 and insulin sensitivity: Friend or foe?’, in Diabetlolgia, Springer, Germany, vol. 47, pp. 1135-1142, ISSN 0012-186X.

Carey, A. L., Bruce, C. R., Sacchetti, M., Saltin, B., Hawley, J. A., Febbraio, M. A., Anderson, M. J. and Olsen, D. B., 2004, ‘Interluken-6 and tumor necrosis factor-a are not increased in patients with type 2 diabetes: Evidence that plasma interluken-6 is related to fat and not insulin responsivness’, in Diabetologia, Springer, Germany, vol. 47, pp. 1029-1037, ISSN 0012-186X.

Carey, A. L., Proietto, J., Febbraio, M. A., Barnett, C., Cerin, E. and Jenkins, D., 2004, ‘Muscle metabolism during sprint exercise in man: Influence of sprint training’, in Journal of Science and Medicine in Sport, Sport Medicine Australia, Australia, vol. 7, pp. 314-322, ISSN 1440-2440.

Chan, S. M., Carey, A. L., Watt, M. and Febbraio, M. A., 2004, ‘Cytokine gene expression in human skeletal muscle during concentric contraction: Evidence that IL-8, like IL-6 is influenced by glycogen availability’, in American Journal of Physiology: Regulatory, Integrative and Comparative Physiology, American Physiological Society, USA, vol. 287, pp. 322-327, ISSN 0363-6119.

Chan, S. M., Watt, M., Hargreaves, M., Febbraio, M. A. and McGee, S., 2004, ‘Altering dietary nutrient intake that reduces glycogen content leads to phosphorylation of nuclear p38 MAP kinase in human skeletal muscle: Association with IL-6 gene transcription during contraction’, in FASEB Journal, Federation of American Societies for Experimental Biology, USA, vol. 18, pp. 1785-1787, ISSN 0892-6638.

Clarke, S., Aughey, R. J., Gore, C. J., Hahn, A. G., Townsend, N. E., Kinsman, T., Chow, C. M., McKenna, M. J. and Hawley, J. A., 2004, ‘Effects of live high, train low hypoxic exposure on lactate metabolism in trained humans’, in Journal of Applied Physiology, American Physiological Society, USA, vol. 96, pp. 517-525, ISSN 8750-7587.

Clark, S., Aughey, R. J., Mckenna, M., Hawley, J. A., Chen, Z. P., Murphy, K. T. and Kemp, B. E., 2004, ‘Intensified exercise training does not alter AMPK signalling in human skeletal muscle’, in American Journal of Physiology: Endocrinology and Metabolism, American Physiological Society, USA, vol. 286, pp. 737-743, ISSN 0193-1849.

71

Page 72: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Darby, I. A., Desmouliere, A., Lorena, D., Reinhardt, D., Sapin, V. and Rosenbaum, J., 2004, ‘Fibrillin-1 expression in normal and fibrotic rat liver and in cultured hepatic fibroblastic cells: Modulation by mechanical stress and role in cell adhesion’, in Laboratory Investigation, Nature Publishing, New York, vol. 84, pp. 203-212, ISSN 0023-6837.

Dashti, M., Geso, M., Wulker, A. E., Davis, S. R. and Cicuttini, F. M., 2004, ‘Relationship between the area of cartilage shown on the magnetic resonance imaging middle-slice image of the medial and lateral tibial cartilages with cartilage volume and grade of osteoarthritis time’, in Scandinavian Journal of Rheumatology, Taylor and Francis, Norway, vol. 33, pp. 87-93, ISSN 0300-9742.

Febbraio, M. A., Carey, M., McAinch, A. J., Parkin, J., Zhao, S., Tangalakis, K. and Stojanovska, L., 2004, ‘Effect of active versus passive recovery on metabolism and performance during subsequent exercise’, in International Journal of Sport Nutrition and Exercise Metabolism, Human Kinetics Publishers, USA, vol. 14, pp. 185-196, ISSN 1526-484X.

Febbraio, M. A., Chung, J., Steensberg, A., Keller, C., Nielsen, H., Krustrup, P., Ott, P., Secher, N., Pedersen, B. K. and Mesa, J., 2004, ‘Glucose ingestion attenuates the exercise-induced increase in circulation heat shock protein 72 and heat shock protein 60 in humans’, in Cell Stress and Chaperones, Cell Stress Society International, United States, vol. 9, pp. 390-396, 4, ISSN 1355-8145.

Febbraio, M. A., Hiscock, N., Sacchetti, M., Fischer, C. and Pedersen, B. K., 2004, ‘Interleukin-6 is a novel factor mediating glucose homeostasis during skeletal muscle contraction’, in Diabetes, American Diabetes Association, USA, vol. 53, pp. 1643-1648, ISSN 0012-1797.

Geso, M., Ackerly, T. and Patterson, W. R., 2004, ‘Improving radiochromic film sensitivity by wrapping it with UV phosphor’, in Medical Physics, American Association of Physicists in Medicine, USA, vol. 31, pp. 1014-1017, ISSN 0094-2405.

Geso, M., Robinson, N., Schumer W. and Williams, K., 2004, ‘Use of water-equivalent plastic scintillator for intravascular bracytherapy dosimetry’, in Australasian Physical and Engineering Sciences in Medicine, Australasian College of Physical Scientists and Engineers in Medicine, Australia, vol. 27, pp. 5-11, ISSN 015-9938.

Gray, K., Piva, T. and Nicolettou, A., 2004, ‘Quality, viability and relevance: A strategic framework for evaluating the effectiveness of mixed-mode teaching and learning in an undergraduate biotechnology and biomedical science degree’, in Education Media International, Taylor and Francis, London, vol. 41, pp. 219-229, ISSN 0952-3987.

Hargreaves, M., Hawley, J. A. and Jeukendrup, A., 2004, ‘Pre-exercise carbohydrate and fat ingestion: Effects on metabolism and performance’, in Journal of Sports Sciences, Taylor and Francis, UK, vol. 22, pp. 1-13, ISSN 0264-0414.

Haskard, C., Ouwehand, A., Salminen, S. J., Ahokas, J. and Lahtinen, S. J., 2004, ‘Binding of aflatoxin B1 to cell wall components of Lactobacillus rhamnosus strain GG’, in Food Additives and Contaminants, Taylor and Francis, UK, vol. 21, pp. 158-164, ISSN 0265-203X.

Hawley, J. A., 2004, ‘Exercise as a therapeutic intervention for the prevention and treatment of insulin resistance’, in Diabetes-Metabolism: Research and Reviews, John Wiley, UK, vol. 20, pp.

72

Page 73: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

383-393, ISSN 1520-7552.

Hawley, J. A. and Houmard, J., 2004, ‘Preventing insulin resistance through exercise: A cellular approach’, in Medicine and Science in Sports and Exercise, Lippincott Williams and Wilkins, USA, vol. 36, pp. 1187-1190, ISSN 0195-9131.

Hawley, J. A. and Zierath, J. R., 2004, ‘Integration of metabolic and mitogen signal transduction in skeletal muscle’, in Exercise and Sport Sciences Reviews, Lippincott Williams and Wilkins, United States, vol. 32, pp. 4-8, ISSN 0091-6331.

Hawley, J. A., Lee, J. S., Bruce, C. R., Mitchel, T., Turner, N., A, J., Else, P. L. and Blankshy, S. J., 2004, ‘Exercise alters the profile of phosholipid molecular species in rat skeletal muscle’, in Journal of Applied Physiology, American Physiological Society, USA, vol. 97, pp. 1823-1829, ISSN 8750-7587.

Hewitson, T., Martic, M.Darby, I. A., Kelynack, K., Bisucci, T., Tait, M. G. and Becker, G., 2004, ‘Intracellular cyclic nucleotide analogues inhibit in vitro mitogenesis and activation of fibroblasts derived from obstructed rat kidneys’, in Nephron Experimental Nephrology, Karger, Switzerland, vol. 96, pp. E59-E66, ISSN 1660-2129.

Hiscock, N., Chan, S. M., Bisucci, T., Darby, I. A. and Febbraio, M. A., 2004, ‘Skeletal myocytes are a source of interlukin-6 mRMA expression and protein release during contraction: Evidence of fiber type specificity’, in The FASEB Journal, Federation of American Societies for Experimental Biology, USA, vol. 10.1096, pp. 1-12, ISSN 0892-6638.

Holmes, A. G., Watt, M. and Febbraio, M. A., 2004, ‘Suppressing lipolysis increases interleukin-6 at rest and during prolonged moderate-intensity exercise in humans’, in Journal of Applied Physiological Society, American Physiological Society, USA, vol. 97, pp. 689-696, ISSN 8750-7587.

Holmes, A. G., Watt, M., Carey, A. L. and Febbraio, M. A., 2004, ‘Ionomycin, but not physiologic doses of epinephrine, stimulates skeletal muscle interleukin-6 mRNA expression and protein release’, in Metabolism, W. B. Saunders, USA, vol. 53, pp. 1492-1495, ISSN 0026-0495.

Lancaster, G., Secher, N., Moller, K., Febbraio, M. A., Nielsen, N. H. and Nybo, L., 2004, ‘Exercise induces the release of heat shock protein 72 from the human brain in vivo’, in Cell Stress and Chaperones, Cell Stress Society International, USA, vol. 9, pp. 276-280, ISSN 1355-8145.

Lee, J. S., Bruce, C. R., Hawley, J. A., Turner, N., Mitchel, T., Else, P. L. and A, J., 2004, ‘Greater effect of diet than exercise training on the fatty acid profile of rat skeletal muscle’, in Journal of Applied Physiology, American Physiological Society, USA, vol. 96, pp. 974-980, ISSN 8750-7587.

Lessard, S., Lo Giudice, S. L., Lau, W., Reid, J. J., Febbraio, M. A., Hawley, J. A., Watt, M. and Turner, N., 2004, ‘Rosiglitazone enhances glucose tolerance by mechanisms other than reduction of fatty acid accumulation within skeletal muscle’, in Endocrinology, The Endocrine Society, USA, vol. 145, pp. 5665-5670, ISSN 0013-7227.

Macrides, T. A., Lucas Slitt, A., Hoivik, J., Manautou, J. E., Cohen, S. D. and Naylor, L. M., 2004, ‘The shark bile salt 5-beta-scymnol abates acetaminophen toxicity, but not covalent

73

Page 74: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

binding’, in Toxicology, Elsevier, Amsterdam, vol. 203, pp. 109-121, ISSN 0300-483X.

Masterson, R., Hewitson, T., Kelynack, K., Martic, M., Parry, L., Bathgate, R., Darby, I. A., Becker, G., and 2004, ‘Relaxin down regulates renal fibroblast function and promotes matrix remodelling in vitro’, in Nephrology Dialysis Transplantation, Oxford University Press, Oxford, pp. 544-552, ISSN 0931-0509.

Ng, C. W., De Matteo, R. and Badoer, E., 2004, ‘Effect of muscimol and L-NAME in the PVN on the RSNA response to volume expansion in conscious rabbits’, in American Journal of Physiology: Renal Physiology, American Physiology Society, USA, vol. 287, pp. 739-746, ISSN 0363-6127.

Pedersen, B. K., Steensberg, A., Fischer, C., Keller, C., Keller, P., Plomgaard, P., Wolsk-Peterson, E. and Febbraio, M., 2004, ‘The metabolic role of IL-6 produced during exercise: Is IL-6 an exercise factor?’, in Proceedings of the Nutrition Society, CABI Publishing, England, vol. 63, pp. 263-267, ISSN 0029-6651.

Saunders, P. U., Gore, C. J., Hahn, A. G., Hawley, J. A., Telford, R. D., Pyne, D. B. and Cunningham, R., 2004, ‘Improved running economy in elite runners after 20 days of simulated moderate-altitude exposure’, in Journal of Applied Physiology, American Physiological Society, USA, vol. 96, pp. 931-937, ISSN 8750-7587.

Saunders, P. U., Hawley, J. A., Pyne, D. B. and Telford, R. D., 2004, ‘Reliability and variability of running economy in elite distance runners’, in Medicine and Science in Sports and Exercise, Lippincott Williams and Wilkins, USA, vol. 36, pp. 1972-1976, ISSN 0195-9131.

Saunders, P. U., Hawley, J. A., Pyne, D. B. and Telford, R. D., 2004, ‘Factors affecting running economy in trained distance runners’, in Sports Medicine: Reviews of Applied Medicine and Science in Sport and Exercise, Adis International, New Zealand, vol. 34, pp. 465-485, ISSN 0112-1642.

Triggle, C. R., Ding, H., Anderson, T. and Pannirselvam, M., 2004, ‘The endothelium in health and disease: A discussion of the contribution of non-nitric oxide endothelium-derived vasoactive mediators to vascular homeostasis in normal vessels and in type II diabetes’, in Molecular and Cellular Biochemistry, Kluwer Academic, The Netherlands, vol. 263, pp. 21-27, ISSN 0300-8177.

Tu, L. Q., Rix, C. J., Wright, P. F. and Ahokas, J., 2004, ‘The subcellular distribution of defluorination activity in marsupial and rodent species’, in Australasian Journal of Ecotoxicology, Australasian Society for Ecotoxicology, Telopea, NSW, vol. 10, pp. 57-63, ISSN 1323-3475.

Watt, M., Chan, S. M., Garnham, A. P., Febbraio, M. A., Kemp, B. E. and Steinberg, G. R., 2004, ‘Beta-adrenergic stimulation of skeletal muscle HSL can be overridden by AMPK signaling’, in FASEB Journal, Federation of American Societies for Experimental Biology, USA, vol. 18, pp. 1-21, ISSN 0892-6638.

Watt, M., Holmes, A. G., Febbraio, M. A., Kemp, B. E., Steinberg, G. R. and Mesa, J., 2004, ‘Reduced plasma FFA availability increases net tracylglycerol degradation, but not GPAT or HSL activity, in human skeletal muscle’, in American Journal of Physiology Endocrinology and Metabolism, Americal Physiological Society, USA, vol. 287, pp. 120-127, ISSN 0193-1849.

74

Page 75: 40011600 Aerospace, Mechanical & Manufacturing …mams.rmit.edu.au/scawy8mad14c1.doc · Web viewAerospace, Mechanical & Manufacturing Engineering 3 Applied Sciences 15 Civil & Chemical

Watt, M., Krustrup, P., Saltin, B., Pedersen, B. K., Febbraio, M. A. and Secjer, N., 2004, ‘Glucose ingestion blunts hormone-sensitive lipase activity in contracting human skeletal muscle’, in American Journal of Physiology: Endocrinology and Metabolism, American Physiological Society, USA, vol. 286, pp. 144-150, ISSN 0193-1849.

Watt, M., Southgate, R., Holmes, A. G. and Febbraio, M. A., 2004, ‘Suppression of plasma free fatty acids upregulates peroxisome proliferators-activated receptor (PPAR) alpha and delta and PPAR coactivator 1-alpha in human skeletal muscle, but not lipid regulatory genes’, in Journal of Molecular Endocrinology, Society for Endocrinology, UK, vol. 33, pp. 533-544, ISSN 0952-5041.

Wright, P. F., Allen, K. J., Cheah, D. M., Gazeas, S., Pettigrew-Buck, N., Deal, Y., Mercer, J. and Williamson, R., 2004, ‘Liver cell transplantation leads to repopulation and functional correction in a mouse model of Wilson's disease’, in Journal of Gastronenterology and Hepatology, Blackwell Publishing Asia, Melbourne, vol. 19, pp. 1283-1290, ISSN 0815-9319.

Conference PublicationDashti, M., Geso, M. and Williams, J., 2004, ‘A new technique in pharmacological fMRI to investigate the effects of Isoflorane and Equithesin on rat brain stimulation.’, in 46th AAPM Annual Meeting, American Association of Medical Physicists (ed.), Journal of Medical Physics, June Issue, Pittsburg (American Association of Physicists in Medicine Annual Meeting).

Singh, V. P., Kumar, D. K., Djuwari, D., Polus, B. I., Fraser, S. F. and Hawley, J. A., 2004, ‘Variation of SEMG during sprint cycling’, in Proceedings of the 2004 Intelligent Sensors, Sensor Networks and Information Processing Conference, M. Palaniswami (ed.), IEEE, Melbourne (Intelligent Sensors, Sensor Networks and Information Processing Conference).

Singh, V. P., Kumar, D. K., Djuwari, D., Polus, B. I., Fraser, S. F., Hawley, J. A. and Lo Giudice, S. L., 2004, ‘Strategies to identify muscle fatigue from SEMG during cycling’, in Proceedings of the 2004 Intelligent Sensors, Sensor Networks and Information Processing Conference, M. Palaniswami (ed.), IEEE, Melbourne (Intellegent Sensors, Sensor Networks and Information Processing Conference).

75


Recommended