An ASSA ABLOY Group brand
400/4400 Series Institutional Door Closer
2
400/4400 series door closers
the engineer’s choicecontents
Introduction .................................. 2
Overview ....................................... 3
Fasteners and Features .............. 4-5
Optional Features ....................... 5-6
Suggested Specifications .............. 7
Applications .............................. 8-12
Technical Details .................... 13-26
Accessories ............................ 27-34
Parts List ................................ 35-48
How To Order ........................ 49-51
finishesProduct will be painted with a combination of waterborne acrylic and polyester powder coat. Closers will withstand 100 hours of salt spray. (ANSI requires 25 hours.)
Sprayed Finishes
DescriptionSpecify Designation
(ANSI/BHMA)Complements the following
finishesOld
Designation
Aluminum 689625, 628, 629, 630, 651, 652
SB
Statuary Bronze 690 613, 640, 695 STAT
Dull Bronze 691 612, 637, 639 BL
Black 693 315 315
Medium Amber 694 312 312
Gold 696 605, 606, 632, 633 GB
Prime Coat (Beige)* 600 — SRI
*600 is a special rust-inhibiting prime coat. Closers can be ordered prime coat only (specify closer x 600). An additional charge applies if finish coat is required over prime coat (ex: 4400 x 600 x 689).
Plated FinishesMetal Covers
OnlyOld
Designation
Bright Brass 605E Yes US3
Satin Brass 606E Yes US4
Bright Bronze 611E Yes US9
Satin Bronze 612E Yes US10
Oxidized Oil Rubbed Bronze 613E Yes US10B
Bright Chrome 625E Yes US26
Satin Chrome 626E Yes US26D
* When a plated finish is ordered, arm and cover will be plated unless “cover only” is specified.
Yale’s 400/4400 Series Institutional Door Closers offer customers the ideal combination of superior performance, quality and strength. With upgraded pinion and piston materials, improved valve design, and staked valves, the closers are the most efficient, dependable closers in the industry. The addition of a size 1-6 spring for the 4400’s also simplifies the process of specifying and ordering product.
This U.L. listed, ANSI/BHMA Grade 1 certified closer has a proven history. It is an ideal choice for interior or exterior doors in facilities that demand reliability such as schools, office buildings, hospitals, department stores and airports.
compliance standards
4400 Series door closers are designed to comply with requirements of the Americans with Disabilities Act (A.D.A.) and ANSI standard A117.1. All series 400/4400 are ANSI/BHMA A156.4, Grade 1 certified. All Yale® series 400/4400 closers with non-hold open arms are listed by Underwriters Laboratories for labeled fire doors. This includes compliance to UL10C and for 3-hour assemblies. The product is manufactured in an ISO 9001 facility. These closers are also listed by the New York City Materials and Equipment Acceptance Division.
CAUTION: Door Closers for Low Opening Force ApplicationsDoor closers installed in opening required of The Americans with Disabilities Act or ANSI Standard A117.1, when adjusted to meet those requirements, may not provide adequate closing power to dependably close and latch the door.
3
400/4400 series door closers
overview
standard features•Castaluminumbody•Rackandpinionbody•Stakedvalves• Separateandindependent,latch,sweepand backcheck intensity valves•Non-handed• 1-1/2"(38mm)diameterpiston• 5/8"(16mm)diameterpinionjournals• 2-1/8"(54mm)projection(standardcovers)• Allstandardarmapplicationsallowdoorstoswing 180°, conditions permitting• 10-yearlimitedwarranty• Self-drillingscrews•Moldedplasticcover•Backcheckpositioningvalve• Full-sizetemplate
optional features•Corrosion-resistantmodel(Non-HoldOpenonly) (4400S only)•Metalcover• Enhancedbackcheck(specifyEBCsuffix)•Delayedactionwithpressurereliefvalve•Heavy-dutyarms:RegularRigid,ParallelRigid, Holder/Stop, Holder/Stop Spring, UNI Stop™• Slidetracks:pushorpullsidemounting• Lead-linedmetalcover(specifyMLLsuffix)
Sweep SpeedRegulating Valve
Spring Adjustment Assembly
Spring Power Adjustment Nut
Latch Speed Regulating Valve
Backcheck CushioningRegulating Valve
Aluminum Alloy ShellPinionPiston Rack
Only Used for Delayed Action
B P S D S L
4400 400
Adjustable spring sizes 1 through 6 (ADA Compliant) X
Sized springs 2, 3, 4, 5, & 6 with 50% power adjustment X
Tri-packed (regular arm, top jamb, and parallel arm mounting) X
Bi-packed (regular arm and top jamb mounting) X
cutaway viewBackcheck Position
Regulating Valve
Type Description
Arm
RA PA TJ Low
Profile PR
HolderStop, Holder/Stop
Spring UNI UNI-J
Slide Track
DOOR
SDST Self Drilling Self Tapping S S S S S S S S S
MS Machine Screw S S S S S S S S S
SN Sleeve Nut O O O O S S S S S
TBGN Thru Bolts & Grommet Nuts O O O O O O O O O
SMS Sheet Metal Screws O O O O O O O O O
TORX TORX Drive Security Screw O O O O O O O O O
FRAME
SDST Self Drilling Self Tapping S S S S S S S S S
MS Machine Screw S S S S S S S S S
SMS Sheet Metal Screws O O O O O O O O O
TORX TORX Drive Security Screw O O O O O O O O O
4
400/4400 series door closers
fasteners and features
Aluminum Alloy HousingCloser bodies are constructed of a special aluminum alloy, carefully selected to accommodate interactive steel components and operating conditions.
Rack & Pinion OperationProvides a smooth constant control of the door through its full opening and closing cycle. 180° door swing can be achieved when door, frame, hardware and arm function do not interfere.
Non-handedWith few exceptions all 400 series and 4400 series door closers are non-handed and can be installed on either right or left-hand swing doors. Pinion shaft extends vertically through the closer body in both directions. Some options, as noted on page 5, will require that the hand of the closer be specified.
Sweep Speed Control ValveAllows adjustment of door speed from the door's full open position down to approximately 10° from the closed position.
Latch Speed Control ValveAllows adjustment of door speed from approximately 10° down to the door’s fully closed position.
Closer FluidAll door closers are supplied with a temperature stable, multi-viscosity fluid. This fluid will permit the door closer to perform within a wide temperature range:fromveryhightoaslowas-40°F.
Tri-Packed 4400 series come with screws, brackets and soffit plates to allow for regular, top jamb, and parallel arm installations.
Adjustable Backcheck Cushion ValveProvides control of the door in the opening cycle, beginning at approximately 75° of door opening. It cushions the door opening when the door is forcibly opened beyond its pre-adjusted limits.
Adjustable Backcheck Position ValveAllows the door opening position, where backcheck cushioning begins to be adjusted to a greater door angle up to a maximum of 20º farther (approximately 95º).
Standard Molded CoversMolded of high-impact U.L. listed material. This cover is non-handed for all applications. See page 5 for optional metal cover.
WarrantyLimited ten-year warranty for defects and life of the building on the aluminum housing.
fasteners
features
S = standard; O = optional
SN are for use on unreinforced hollow metal doors or to prevent any hollow metal door from collapse/dimpling. They can also be used for thruboltingonwooddoors.SNaresuppliedfor1-3/4"(44mm)thickdoorsunlessspecifiedfor2-1/4"(57mm)thickdoors.
TBGN are an alternative to SN for wood doors. TBGN are supplied standardfor1-3/4"(44mm)thickdoors.Theycanbespecifiedfor1-3/8"(35mm)thickdoors.
SMS - when specified, closer will be packed with sheet metal screws for the door AND sheet metal screws plus machine screws for the frame.
TORX screws with security pin are standard with SC400/SC4400 Security Door Closers. TORX may be specified for all other series applications. TORX are only available with machine screw threads. Sheet metal screw threads are not available.
5
400/4400 series door closers
optional features
optional covers
Optional Metal CoverThis steel cover is non-handed for regular and parallel arm applications, but is handed for top jamb applications. Cover is available in sprayed or plated finishes.
Optional ABS CoverContact factory for details.
optional features
door closer power optionsSeries 400 Sized Door CloserAvailable in five different power sizes (2, 3, 4, 5 or 6). Each power size is adjustable up to 50% stronger than the minimum closing force for that size, as outlined in ANSI/BHMA standard A156.4 with option PT 4C.
Series 4400 Multi-Sized Door CloserAdjustable through the power range of sizes 1 through 6; as outlined in ANSI/BHMA standard A156.4 with option PT 4H.
The series 4400 also conforms to the minimum opening force requirements for The American with Disabilities Act (ADA) and ANSI/BHMA standard A117.1 for interior doors.
Corrosion-Resistant Door CloserThe series 4400S door closers with molded plastic cover are available for use where brass conditions exist. This series is provided with brass adjustment valves adjustment valves, a 440 grade stainless steel pinion shaft, an all-aluminum body and bronze closer arm bushing; all other components and fasteners are of 302/303 grade stainless steel. Fasteners are 8-18 stainless steel. This product is available for standard regular arm, top jamb and parallel arm, non-hold open applications only.
Security CoverSupplied standard with all SCR400, SCP400, SCR4400 and SCP4400 closers. This deep drawn steel cover is handed for all applications. The cover is fastened to the closer body at two points on top and to the door closer cover body stand-offs at two points on the bottom. See Security Closer Catalog for more information.
Non-Hold OpenSelf-closes door every time door is opened. Auxiliary stop (by others) required except when using the Holder/Stop, Holder/Stop Spring or UNI Stop™ arms.
Hold OpenAchieved by means of friction or ball and detent/roller. Friction hold open has a range of 90° to 180° using template location and mechanical adjustment. Ball and detent or roller hold open is effective in a range of 85° to 110°.
Hold open arm door closers are not permitted to be used on fire door assemblies.
arms
6
400/4400 series door closers
optional features
Adjustable Delayed Action ClosingAn optional hydraulic feature that adds a third speed range to the closing cycle. This feature becomes effective when the door is opened and released at any point beyond 70°. The amount of time delay depends upon the combination of the angle of door release and valve adjustment. The valve can be adjusted witha1/8"(3mm)hexkeyfromnodelaytimeuptomaximumdelaytimesof:
Pressure Relief Safety ValveThe delayed action hydraulic system contains a pressure relief valve. Any time the door is forced toward the closed direction while it is in the closing cycle, the valve will open and permit the door to close. This prevents damage to door, frame and closer.
Suggested ApplicationsDelayed Action closing allows slow-moving traffic to clear the opening
before the door closer’s normal closing cycle begins. This feature can be helpful in health care facilities such as hospitals and nursing homes. It provides sufficient time for persons on crutches or in wheelchairs to pass through a door without concern of it closing. At the same time, it can accommodate the facility's staff with movement of food service carts, beds, and other wheeled traffic.
Use of delayed action closers on many doors throughout industrial and commercial buildings can also assist the flow of traffic. Locations where additional time to clear the opening is advantageous are doors between office and factory/warehouse facilities, doors
to workshops or laboratories, to kitchen and food processing areas, etc.
Enhanced BackcheckThis feature provides adjustable backcheck intensity beginning at approximately 15° of the door opening cycle. It is intended for use in situations where the standard backcheck beginning at approximately 75° of door opening allows too much unrestricted door travel to obtain control of the door without the fear of peripheral damage to the door closer, door, frame, hinges or pivots; or adjacent walls or structures. This feature is most frequently used in schools and detention facilities. Specify suffix EBC.
Door Opened and Released at
Approximate Time of Delay Cycle
180° 4-5 minutes
120° 2-3 minutes
90° 25-30 seconds
Arm FunctionRegular Arm,
Top Jamb, Parallel Arm
Parallel Rigid Arm
Holder/Stop Parallel Arm
Holder/Stop Spring Parallel Arm
UNI StopParallel Arm
UNI StopTop Jamb
Low Profile
Slide Track
Non-Hold Open 3 3 85° to 110° 85° to 110° 85° to 110° 85° to 110° 3 85° to 110°/180°
Hold Open 90° to 180° 85° to 180° 85° to 110° 85° to 110° 85° to 110° 85° to 110° N/A 85° to 110°
3=180˚ trim and template permitting
Door Opening Degrees
delayed action
7
400/4400 series door closers
suggested specifications4400 seriesClosers for interior and exterior doors shall be full rack-and-pinion type with cast aluminum alloy shell. Closers shall be surface mountedandshallprojectnomorethat2-3/16"fromthesurfaceofthedoor.Closersshallbenon-handedtopermitinstallationon doors of either hand. Closer fluid shall contain lubricity and anti-oxidation agents. Closer fluid shall maintain stable viscosity to allow door closer to perform in temperatures ranging from extremely high to as low as -40°F. Closers shall have multi-size spring power adjustment to permit setting of spring from size 1 through 6. Closers shall have two non-critical valves, hex key adjusted, to independently regulate sweep and latch speed. Closers shall have backcheck cushioning controlled by a hex key adjusted valve. Closers shall have backcheck position controlled by a hex key adjusted valve.
[Closers shall have adjustable delayed-action closing controlled by a hex key adjustable valve.]
[Closers shall be highly corrosion resistant and shall have all external body components of aluminum, zinc alloy or stainless steel material and all fasteners of stainless steel.]
Regular arm and top jamb closers shall have a non-hold open shoe permitting 15% ( ± 7-1/2% ) power adjustment.**Closers shall be enclosed in a [molded resin cover], [plated or sprayed metal cover]. Closers to be Yale® [4400] [4400M] [4400S].
**For special arms insert the appropriate specification here (see below).
400 seriesClosers for interior and exterior doors shall be full rack-and-pinion type with cast aluminum alloy shell. Closers shall be surface mountedandshallprojectnomorethat2-3/16"fromthesurfaceofthedoor.Closersshallbenon-handedtopermitinstallationof doors of either hand. Closer fluid shall contain lubricity and anti-oxidation agents. Closer fluid shall maintain stable viscosity to allow door closer to perform in temperatures ranging from extremely high to as low as -40°F. Closers shall have power adjustment to permit a 50% increase in power over the minimum closing force for any size. Closers shall have two non-critical valves, hex key adjusted, to independently regulate sweep and latch speed. Closers shall have backcheck cushioning controlled by a hex key adjusted valve. Closers shall have backcheck position controlled by a hex key adjusted valve.
[Closers shall have adjustable delayed action closing controlled by a hex key adjustable valve.]
Regular arm and top jamb closers shall have a non-hold open shoe permitting 15% (± 7-1/2%) power adjustment.** Closers shall be enclosed in a [molded resin cover] [plated or sprayed metal cover] Closers to be Yale® [400] [400M].
**For special arms insert the appropriate specification here (see below).
**uni stop™ armDoor closers shall have a fixed door stop feature effective at one point selected at installation, from 85-110º in five-degree increments. Door stop shall be cushioned by a shock-absorbing heavy-duty spring action effective at the [soffit plate] [arm shoe] pivot. [Closers shall be provided for parallel arm installation using rigid steel main arm and secondary arm lengths proportional to the door width.] [Closers shall be provided for top jamb installation using steel, rigid main arm and telescoping secondary arm adequate for the frame reveal of the openings.]
**holder/stop armDoor closers shall have a field reversible door stop. Door closer shall have a feature with selectable on and off ball and detent hold open. Hold open tension shall be adjustable effective at one point selected at installation, from 85° - 110° in five degree increments. [Hold open mechanism shall have engage/ disengage selection actuated by thumbturn]. Closers shall be provided for parallel arm installation using a forged rigid steel main arm and secondary arm.
**holder/stop spring armDoor closers shall have built-in door stop [and holder] effective at one point selected at installation, from 85° - 110° in five-degree increments. Door stop mechanism shall be reversible and have a buffer spring that engages prior to the dead stop feature, reducing shock loads to the door and frame assembly. Door stop mechanism shall be attached to soffit plate. [Hold open mechanism shall have engage/disengage selection actuated by thumbturn]. Closers shall be provided for parallel installation using a forged rigid steel main arm and secondary arm.
8
400/4400 series door closers
applications
regular armThis is the only pull-side application where a double lever arm is used. It is the most power-efficient application for a door closer. Sufficient frame, door and/or ceiling clearance must be considered.
Since the arm assembly projects directly out from the frame, this application may present an aesthetics issue or be prone to vandalism.
top jambFor efficiency reasons this application provides the best alternative to the regular arm application. There must be sufficient frame face and/or ceiling clearance for this application.Itrequiresatoprailonthedoorofjust2-1/8"(54mm). This application provides the best door control for doors in exterior walls that swing out of a building.
The entire door closer and arm assembly project from the frame, similar to the regular arm application, where the matters of appearance and malicious abuse can be of concern. Consideration must be given to depth of reveal.
parallel armThis application provides the most appealing design appearance for a surface-mounted door closer having a double lever arm. This also makes it beneficial in vandalism-prone areas. It is on the push side of the door and the arm assembly extends almost parallel to the door. In the closed position, there is very little or no hardware projecting beyond the frame face in most situations.
Due to the geometry of the arm it is approximately 25% less power efficient than a regular arm application.
The entire closer and arm assembly are mounted below the frame stop, requiring a top rail clearance on the door of between6-5/8"(168mm),whenusingalowprofilearm,to7-1/4"(184mm),whenusingtheholdopenarm.
Non-hold open arm shown
Non-hold open arm shown
Non-hold open arm shown
9
400/4400 series door closers
applications
Non-hold open arm shown
Parallel Rigid Offset ArmThis heavy-duty parallel rigid arm provides additional vertical clearance. It is well suited for applications where weather-stripping or other hardware prevents the use of the standard Parallel Rigid (PR) soffit plate. The non-hold openandholdarmsallow1-1/4"clearance.Whenusedin conjunction with a #6891 spacer block, the PRO arm provides1-7/8"clearancetoaccommodatetheuseofasurface overhead stop/holder.
Non-hold open arm shown
Holder/Stop ArmSimilar to the Parallel Rigid arm, this arm incorporates a stop at the arm’s soffit plate to dead stop the door at a predetermined degree of door swing between 85° and 110°, in 5° increments. Prior to dead stop the door closer’s backcheck feature slows the door speed to reduce the impact of the stop action.
The Holder/Stop Arm is intended for use where an auxiliary door stop cannot be utilized and no more than moderate abuse is anticipated. Where more extreme conditions are expected, use of a UNI Stop™ arm is recommended.
Thumbturn hold open available. (Hold open strength is adjustable.)
Holder/Stop Spring ArmThis heavy-duty stop arm includes all of the features of the Holder/Stop arm, plus an additional steel buffer spring that provides greater protection at the end of the door opening cycle. For extreme conditions, use of a UNI Stop™ is recommended. Available with or without hold open.
Non-hold open arm shown
Non-hold open arm shown
Parallel Rigid ArmAn enhanced variation of the standard parallel arm assembly that is intended for use in heavy traffic areas where auxiliary door stops are installed. Hold open available – specify hand when ordering.
10
400/4400 series door closers
applications
Regular Rigid Heavy-Duty ArmThis double lever arm features a non-adjustable secondary arm. Orbitally riveted joints prevent tampering or disassembly. The rigid heavy-duty arm is standard with the security closers featuring a regular arm (SCR4400 or SCR400) but is also available with standard product. Prefix “R” to model number. Available non-hold open only.
UNI Stop™ ArmCan be used for either parallel arm or top jamb applications. UNI Stop arms combine the features of a double lever arm overhead door stop/holder with the backcheck feature of the door closer to reduce door stopping shock loads to a minimum. The UNI Stop uses a compression spring buffer at the soffit plate/arm shoe that will absorb 30 lbf. of force, 5° prior to the door’s dead stop. Coupled with the door closer’s backcheck feature, this arm provides the most controlled stop available with a surface door closer.
For parallel arm applications there are three different length arm assemblies. Each length is designed for a specific range of door widths to provide precise door control. This further lessens the dead stop impact on the door’s hinges/pivots.
Parallel arm Top jamb
Pull Side Low Profile Pull Side
11
400/4400 series door closers
applications
Corner BracketThis application can be used where top jamb and parallel arm application will not accommodate the door and frame conditions. Requires minimal top rail on the door; however, vertical clearance to the floor within the door opening should be checked to ensure code compliance.
The close proximity, for this application, of the door closer to the door’s pivot point reduces the door closer’s power efficiency by approximately 25% when compared to a regular arm. The projection of the arm from the door face might pose questions regarding design parameters.
Slide TrackWhether pull or push side mounted, this provides the designer with the smoothest lines available in a surface mounted door closer. The single lever arm allows components to be located in a stack configuration to minimize projection and eliminate obtrusive arm angles.
The arm geometry reduces door closer power efficiency by approximately 25% from that of a regular arm.
A variation of the standard slide track application is available for pocket doors, where it is desirable to have the door closer completely concealed when the door is in the 90° open position. See page 26 for details.
Low Profile Push SidePush Side
Low Profile Arm
12
400/4400 series door closers
applications
Supplied with 2400/4480 series door closers for non-hold open installations only. These arms have a reduced height elbow joint andastraightmainarm.Thisenablesthedoorclosertobeinstalledinlessverticalspace:
Regular Arm Allows closer to be installed where there is as little as 1" (25mm) of frame face or ceiling clearance.
Parallel Arm Allows closer to be installed 1/2" (13mm) higher up on door then standard parallel arm application.
Regular arm Parallel arm
2-1/8(54)
Mountingholesforcloserbodyarespaced2-3/8"(60mm)verticallyx6-3/4"(171mm)horizontally.
* For doors opening up to 100°** This dimension will vary. Standard non-hold open arm illustrated.
Maximum Door WidthInches (cm)
Model Number
Sized Closer Multi-Sized Closer
Interior Exterior Non-Hold Open Hold Open Non-Hold Open Hold Open
32"(81) 30"(76) 402 1402
4400 4410
38"(97) 34"(86) 403 1403
48"(122) 42"(107) 404 1404
54"(137) 48"(122) 405 1405
Unusual Conditions 406 1406
Note: 4400 door closers are set at mid-power range from the factory and can be adjusted for door sizes noted above.
2-1/8(54)
13
400/4400 series door closers
regular arm
14
400/4400 series door closers
top jamb arm
2-1/8(54)
Mountingholesforcloserbodyarespaced2-3/8"(86mm)verticallyx6-3/4"(171mm)horizontally.* For doors opening up to 100°**Minimumframefacewith486backplate.3-1/4"(83mm)requiredwhendropplateisnotused.
Model NumberReveal RangeInches (mm)
MaximumDoor
Opening
SizedCloser
Multi-Sized Closer
Non-Hold Open Arm
400/400M 4400/4400M0"to3"(0 to 76)
180˚
TJ400 TJ44002-3/4"to7"(70 to 178)
150˚
TJL400 TJL44002-3/4"to7"(70 to 178)
180˚
TJ2400 x 487 TJL4480 x 487 0"to2-3/4"
(0 to 70)180˚
SizedCloser
Multi-Sized Closer
Hold Open Arm
14001400M
4410 4410M
0"to3"(0 to 76)
180˚
TJ1400 TJ44102-3/4"to6-3/4
(70 to 171)150˚
TJL1400 TJL44102-3/4"to6-3/4"
(70 to 171)180˚
AMinimum top rail of door
Inches (mm)
Without drop plate or with 486 back plate
With 487 drop plate
(TJ)400(TJ)4400
(TJ)1400(TJ)4410
(TJ)2400(TJ)4480
(TJ)400(TJ)4400
(TJ)1400(TJ)4410
(TJ)2400(TJ)4480
2"(51)
2-1/2"(64)
N/A4-1/8"(105)
4-5/8"(117)
3-5/8"(92)
Maximum Door WidthInches (cm)
Model Number
Sized Closer Multi-Sized Closer
Interior ExteriorNon-Hold
OpenHold Open
Non-Hold Open
Hold Open
32"(81) 30"(76) (TJ)402 (TJ)1402
(TJ)4400 (TJ)4410
38"(97) 34"(86) (TJ)403 (TJ)1403
48"(122) 42"(107) (TJ)404 (TJ)1404
54"(137) 48"(122) (TJ)405 (TJ)1405
Unusual Conditions (TJ)406 (TJ)1406
Note: 4400 door closers are set at mid-power range from the factory and can be adjusted for door sizes noted above.
2-1/8(54)
Mountingholesforcloserbodyarespaced2-3/8"(86mm)verticallyx6-3/4"(171mm)horizontally.
* For doors opening up to 100°** This dimension will vary. Standard non-hold open arm illustrated.
Maximum Door WidthInches (cm)
Model Number
Sized Closer Multi-Sized Closer
Interior Exterior Non-Hold Open Hold Open* Non-Hold Open Hold Open*
30"(76) — PA402 PA1402
(PA)4400 (PA)4410
36"(91) 30"(76) PA403 PA1403
42"(107) 36"(91) PA404 PA1404
48"(122) 42"(107) PA405 PA1405
54"(137) 48"(122) PA406 PA1406
Note: 4400 door closers are set at mid-power range from the factory and can be adjusted for door sizes noted above.
* Specify hand when ordering.
B
8-1/8*(206)
2-1/8(54)
**
BMinimum top rail of door with 5/8" (16mm) frame stop
Inches (mm)
Without drop plate With 488 drop plate
PA4004400
PA14004410
PA2400PA4480
PA14004410
PA2400PA4480
5-7/8"(149)
6-1/4"(159)
5-3/8"(137)
2-3/4"(70)
1-7/8"(48)
15
400/4400 series door closers
parallel arm
16
400/4400 series door closers
parallel rigid arm
2-1/8(54)
Mountingholesforcloserbodyarespaced2-3/8"(60mm)verticallyx6-3/4"(171mm)horizontally.
Note: 4400 door closers are set at mid-power range from the factory and can be adjusted for door sizes noted above.
*Specify handing
Maximum Door WidthInches (cm)
Model Number
Sized Closer Multi-Sized Closer
Interior ExteriorNon-Hold
OpenHold
Open*Non-Hold
OpenHold
Open*
30"(76) — PR402 PR1402
PR4400 PR4410
36"(91) 32"(81) PR403 PR1403
42"(107) 36"(91) PR404 PR1404
48"(122) 42"(107) PR405 PR1405
— 48"(122) PR406 PR1406
CTemplate Position Hold Open or Non-Hold Open
Inches (mm)
0° to 100° 101° to 120° 121° to 180°
8-1/8"(206)
7-1/8"(181)
6-1/8"(156)
CTemplate Position
for Hold Open or Stop at Listed Angle Inches (mm)
85° 90° 95° 100° 105° 110°
9-5/8(244)
8-3/4(222)
8-1/4(210)
7-3/8(187)
6-7/8(175)
6-1/4(159)
2-1/8(54)
Mountingholesforcloserbodyarespaced2-3/8"(60mm)verticallyx6-3/4"(171mm)horizontally.
Note: 4400 door closers are set at mid-power range from the factory and can be adjusted for door sizes noted above.
Maximum Door WidthInches (cm)
Model Number
Sized Closer Multi-Sized Closer
Interior ExteriorNon-Hold
OpenThumbturnHold Open
Non-Hold Open
ThumbturnHold Open
30"(76) — 4022 4022T
4420 4420T
36"(91) 32"(81) 4023 4023T
42"(107) 36"(91) 4024 4024T
48"(122) 42"(107) 4025 4025T
— 48"(122) 4026 4026T
17
400/4400 series door closers
holder/stop arm
18
400/4400 series door closers
holder/stop spring arm
Maximum Door Width
Inches (cm)
Model Number
Sized Closers Multi-Sized Closers
Non-Hold Open
ThumbturnHold Open
Non-Hold Open
ThumbturnHold OpenInterior Exterior
30"(76) — 4032 4032T
4430 4430T
36"(91) 32"(81) 4033 4033T
42"(107) 36"(91) 4034 4034T
48"(122) 42"(107) 4035 4035T
— 48"(122) 4036 4036T
Mountingholesforcloserbodyarespaced2-3/8"(60mm)verticallyx6-3/4"(171mm)horizontally.
Note: 4400 door closers are set at mid-power range from the factory and can be adjusted for door sizes noted above.
CTemplate Position
for Hold Open or Stop at Listed AngleInches (mm)
85° 90° 95° 100° 105° 110°
9-5/8(244)
8-3/4(222)
8-1/4(210)
7-3/8(187)
6-7/8(175)
6-1/4(159)
2-1/8(54)
Note: 4400 door closers are set at mid-power range from the factory and can be adjusted for door sizes noted above.
Mountingholesforcloserbodyarespaced2-3/8"(60mm)verticallyx6-3/4"(171mm)horizontally.
Door OpeningC
Template PositionInches (mm)
to 100°6-3/8"(182)
100° to 120°5-3/8"(137)
121° to 150°3-3/8"
(86)
151° to 180°3-1/8"
(79)
Maximum Door WidthInches (cm)
Model Number
Sized Closer Multi-Sized Closer
Interior Exterior Non-Hold Open
36"(91) 30"(76) R402
R4400
42"(107) 36"(91) R403
46"(122) 42"(107) R404
54"(137) 48"(122) R405
— 52"(132) R406
19
400/4400 series door closers
regular rigid heavy-duty arm
3-1/2(89)
14-1/2(368)
Hinge
1-7/8(48)
4-1/4(108)
2-1/8(54)
4(102)
C(178)
20
400/4400 series door closers
uni stop™ parallel arm
2-1/8(54)
Note: 4400 door closers are set at mid-power range from the factory and can be adjusted for door sizes noted above.
Mountingholesforcloserbodyarespaced2-3/8"(86mm)verticallyx6-3/4"(171mm)horizontally.Door width must be specified when ordering.*Reveals1-7/8"to4-5/8"(48mmto117mm)standard,uses6190bracket. Revealsinexcessof4-5/8"(117mm)requiresuseof6191reinforcingkit. Revealsto1/8"(3mm)requiresuseof589Langlebracket.
DoorWidthInches(cm)
CTemplate Position
for Hold Open at Listed Angle or Dead Stopat listed Angle Plus 5°
Inches (mm)
DArm
ExtensionBeyondCloser
85° 90° 95° 100° 105° 110°
28-32"(71-81)
4"(102)
3-3/8"(86)
2-7/8"(73)
2-1/2"(64)
2-1/8"(54)
1-3/4"(44)
8-5/8"(219)
33-41"(84-104)
6-3/8"(162)
5-3/4"(146)
5-1/8"(130)
4-5/8"(117)
4-1/8"(105)
3-3/4"(95)
10-1/8"(257)
42-48"(107-122)
8-5/8"(219)
7-7/8"(200)
7-1/4"(184)
6-5/8"(168)
6-1/8"(156)
5-5/8"(143)
11-1/2"(292)
Maximum Door WidthInches (cm)
Model Number
Sized Closer Multi-Sized Closer
Interior Exterior Non-Hold Open Hold Open Non-Hold Open Hold Open
30"(76) — UNI402 UNI1402
UNI4400 UNI4410x Specify Door
Width
36"(91) 30"(76) UNI403 UNI1403
42"(107) 36"(91) UNI404 UNI1404
48"(122) 42"(107) UNI405 UNI1405
— 48"(122) UNI406 UNI1406
2-1/8(54)
Maximum Door WidthInches (cm)
Model Number
Sized Closer Multi-Sized Closer
Interior Exterior Non-Hold Open Hold Open Non-Hold Open Hold Open
34"(86) — UNIJ402 UNIJ1402
UNIJ4400 UNIJ4410x Specify Frame
Reveal
42"(107) 34"(86) UNIJ403 UNIJ1403
48"(122) 42"(107) UNIJ404 UNIJ1404
54"(137) 48"(122) UNIJ405 UNIJ1405
— 54"(137) UNIJ406 UNIJ1406
Note: 4400 door closers are set at mid-power range from the factory and can be adjusted for door sizes noted above.
Mountingholesforcloserbodyarespaced2-3/8"(60mm)verticallyx6-3/4"(171mm)horizontally.
*Revealsuptoamaximumof7-3/8"(187mm).
Reveal must be specified when ordering
1. 486 backplate supplied standard with closer
21
400/4400 series door closers
uni stop™ top jamb arm
Backplates F
Minimum Frame Face
EMinimum
Ceiling Clearance
AMinimum Top Rail
Clearance
CTemplate Position for Hold Open at Listed Angle
or Hold Open at Listed Angle Plus 5°
4861 1-5/8"(41)
3-1/8"(79)
2-1/4"(57)
85° 90° 95° 100° 105° 110°
4871-7/8"
(48) 3-1/2"
(89) 9-1/8"(232)
8-1/2"(216)
7-7/8"(200)
7-3/8"(187)
7"(178)
6-5/8"(168)
22
400/4400 series door closers
pull side slide track
2-1/8(54)
Note: 4400 door closers are set at mid-power range from the factory and can be adjusted for door sizes noted above.
1- Units can also be mounted with the closer body on the jamb. Prefix the model number with a “TJ”. Where the frame face is less than 3-3/8" (86mm) a number 486JP backplate will be required.
2- Units can also be installed on double egress doors using a handed arm that will accommodate the frame profile. Suffix the model number with “DE”. For reveal ranges 1/4" to 3" (6 to 76mm).
Mountingholesforcloserbodyarespaced2-3/8"(86mm)verticallyx6-3/4"(171mm)horizontally.
Max. Door WidthInches (cm)
Model Number1, 2
Sized Closer Multi-Sized Closer1, 2
Non-Hold OpenHold Open85°-100°
Non-Hold OpenHold Open85°-100°
Interior Exterior 85˚-100˚ 85˚-180˚ 85°-100° 85°-180°
32"(81)
— 404ST 404ST-180 1404ST
4400ST 4400ST-180 4410ST38"(97)
32"(81)
405ST 405ST-180 1405ST
48"(122)
38"(97)
406ST 406ST-180 1406ST
BMinimum top rail of door with frame stop
Inches (mm)
Without drop plate With 486 drop plate
3-1/2"(111) 2-5/8"(67)
2-1/8(54)
Mountingholesforcloserbodyarespaced2-3/8"(86mm)verticallyx6-3/4"(171mm)horizontally.
Note: 4400 door closers are set at mid-power range from the factory and can be adjusted for door sizes noted above.
Max. Door WidthInches (cm)
Model Number
Sized Closer Multi-Sized Closer
Interior ExteriorNon-Hold Open
85° - 110°Hold Open85° - 110°
Non-Hold Open85°-100°
Hold Open85°-100°
32"(81)
— P404ST P1404ST
P4400ST P4410ST38"(97)
32"(81)
P405ST P1405ST
48"(122)
38"(97)
P406ST P1406ST
BMinimum top rail of door with frame stop
Inches (mm)
Without drop plate With 488 drop plate
6"(152) 2-5/8"(67)
23
400/4400 series door closers
push side slide track
24
400/4400 series door closers
low profile pull side slide track
2-1/8(54)
Mountingholesforcloserbodyarespaced2-3/8"(60mm)verticallyx6-3/4"(171mm)horizontally.
Note: 4400 door closers are set at mid-power range from the factory and can be adjusted for door sizes noted above.
Max. Door WidthInches (cm)
Model Number
Sized Closers Multi-Sized Closers
Interior Non-Hold Open Hold Open Non-Hold Open Hold Open
32"(81)
444ST 454ST
4440ST 4450ST38"(97)
445ST 455ST
48"(122)
446ST 456ST
BMinimum top rail of door with frame stop
Inches (mm)
Without drop plate With 486 drop plate
3-1/2"(89) 2"(51)
2-1/8(54)
Mountingholesforcloserbodyarespaced2-3/8"(60mm)verticallyx6-3/4"(171mm)horizontally.
Note: 4400 door closers are set at mid-power range from the factory and can be adjusted for door sizes noted above.
BMinimum top rail of door with frame stop
Inches (mm)
Without drop plate With 488 drop plate
5-1/4"(133) 3-5/8"(92)
Max. Door WidthInches (cm)
Model Number
Sized Closers Multi-Sized Closers
Interior Non-Hold Open Hold Open Non-Hold Open Hold Open
32"(81)
P444ST P454ST
P4440ST P4450ST38"(97)
P445ST P455ST
48"(122)
P446ST P456ST
25
400/4400 series door closers
low profile push side slide track
26
400/4400 series door closers
pocket door 406stp
406STP or 406EP-STP Series ClosersSlide Track Closer for 90° Wall Pocket InstallationFor Pocket Depths 2-1/4" to 4-1/4" (57mm to 108mm) (See Chart for Closer Sizing)
IMPORTANTWall Reinforcement (by others)
Must Be Sufficient to Withstand Door Action
IMPORTANTWall Reinforcement (by others)Must Be Sufficient to Withstand
Door Action
See chart (above) for closer sizing.
Closer Sizing Chart (cm)
Maximum Door Width
Closer
42"(107)
406STP
48"(122)
406EP-STP
Narrow Frame (Top Rail) - #486 Drop Plate:Forusewherethe narrow top rail of the door prevents the closer from being mounted directly to the door surface. This drop plate must beusedforclosermountedonatoprailbetween1-7/8"and3-3/8"(48and86mm)inheight.
closer mounting plate
Molded/Bull Nose Trim - #291:Forusewherethedoorframe has molded or bull nose trim which will not accept a standard non-hold open shoe. The bracket is mortised into the frame rabbet, and projects beyond the face of the frame. It will accommodateaframerabbetupto2"(51mm)deep.
Molded/Bull Nose Trim - #291A Bracket:Thisbracketissimilar to – but longer than – the 291 bracket. It is designed to accommodateframerabbetsfrom2"to2-7/8"(51to73mm)deep.
Molded/Bull Nose Trim - #292 Bracket:Forusewherethedoorframehasmoldedorbullnosetrimwhichwillnotacceptastandard hold open shoe. It is mortised into the frame rabbet, and projects beyond the face of the frame. It will accommodate a rabbetupto2"(51mm)deep.Thisbracketisusedincombinationwiththestandardholdopenmountingshoe.
brackets for hold open arms
brackets for non-hold open arms
Overhead Door Holder - #486OH Drop Plate:Forusewhere a surface or concealed overhead door holder prevents normal arm mounting screws to clear the bottom of the door holder. This places the centerline of the arm mounting screws at2-7/8"(73mm)fromthetopofthedoor.
27
400/4400 series door closers
regular arm
13-5/8"(346mm)
3-15/16"(100mm)
13-5/8"(346mm)
3-7/8"(94mm)
1-1/2"(38mm)
3"(76mm)
3-5/16"(84mm)
2-1/16"(52mm)
2-1/2"(64mm)
1-7/16"(37mm)
1-1/2"(38mm)
3-3/4"(95mm)
28
400/4400 series door closers
regular arm
Narrow Frame - #486 Back Plate:Forusewhereanarrow frame face prevents the closer from being mounted directly to the frame. This back plate must be used for closermountedonaframebetween1-7/8"and3-1/8"(48and 79mm) in height.
closer mounting plates
Low Ceiling Clearance - Overhead Door Holder - #487 Drop Plate:Forusewheretheceilingclearanceisbetween1-7/8"and3-7/8"(48and98mm)orwhereasurfaceorconcealed overhead door holder prevents normal top jamb mounting. This plate drops the closer and allows the arm mounting screws to clear the bottom of the door holder. This placesthecenterlineofthearmmountingscrewsat3-1/8"(79mm) from the top of the door.
For closer sizing information use the Parallel Arm Sizing Chart on page 15. The use of a corner bracket requires a door closer of the opposite hand from that of the door when ordering handed closers.
Mounting Opposite Hinge Side - #498 Standard Drop Corner Bracket:Forusewhereitisdesiredtomountaregular arm non-hold open closer.
Extra-Drop Mounting Opposite Hinge Side - #2498 Corner Bracket:Forusewhereitisdesiredtomountaregular arm hold open closer, or where it is necessary for a regular arm non-hold open closer to clear a separate overheaddoorholder.Thisbracketdropsthecloser1-1/8"(29mm) lower than the 498 Corner Bracket.
corner brackets for closer mounting
top jamb
13-5/8"(346mm)
13-5/8"(346mm)
3-15/16"(100mm) 4-1/8"
(105mm)
6"(152mm)
6-1/8"(156mm)
16-3/8"(416mm)
7"(178)
7"(178)
6"(152mm)
16-3/8"(416mm)
6-1/8"(156mm)
Narrow Top Rail - #488 Drop Plate:Forusewhereanarrowtop rail prevents the closer from being mounted directly to the door surface. This drop plate can be used to mount a closer on atoprailasnarrowas2-1/2"(64mm)inheight.
closer mounting plate
Standard Installation - #289 Soffit Plate:Thissoffitplateissupplied standard with parallel arm closers. It can be mounted wheretheframesoffitisasnarrowas1"(25mm).Specify 289A-SS for stainless steel soffit plate.
Mounting Between Doors - #413A Soffit Bracket:Forusewhere insufficient space between companion doors does not permit use of other soffit plates. This bracket permits mounting ofthecloserbetweendoorswithaslittleas3"(76mm)ofheaderspace.Permitscloserarmtoclearupto5/8"(16mm)high stop.
brackets for non-hold open arms
Blade/Applied Stop - #299 Soffit Plate:Forusewherea blade or applied stop does not permit installation of the standard soffit plate. Mounts to either the frame soffit or rabbet.Sincethissoffitplateprojects7/8"(22mm)lessthana standard soffit plate, it requires a minimum frame reveal of 1-1/2"(38mm).Permitsclosertoclearuptoa5/8"(16mm)stop.
29
400/4400 series door closers
parallel arm
Narrow Frame/Removable Stop - #297 Soffit Plate:Foruse where a narrow frame or frame with removable stop does not permit use of the standard soffit plate. This soffit plate may be mounted on the frame soffit or the frame rabbet where the stopdoesnotexceed5/8"(16mm)inheight.Allofthescrewholesareinastraightline,requiringaslittleas1-1/4"(32mm)of frame reveal to mount bracket and maintain good closer armgeometry.Wheretheframesoffitisaswideas2"(51mm),this soffit plate may be used to clear weather-stripping that is upto1-3/8"(35mm)wideand5/8"(16mm)inheight.
1-1/2"(38mm)4-7/8"
(124mm)
3-1/2"(89mm)
2"(51mm)
2-3/16"(56mm)
3"(76mm)
3-5/8"(92mm)
4"(102mm)
3-1/2"(89mm)
5-1/8"(130mm)
13-5/8"(346mm)
30
400/4400 series door closers
parallel arm
Flush Transom - #589L Angle Bracket:Forusewhererabbeted or flush transom conditions prevent installation of a soffit plate. Used in combination with the 289 soffit plate, or may be used in combination with the 290 soffit plate when it is necessary for the closer arm to clear a separate overhead door holder.
brackets for non-hold open arms (continued)
Extra-Clearance - #290 Offset Soffit Plate:Forusewherethe need for additional clearance prevents use of the standard soffit plate. This plate mounts to the frame soffit to provide up to2"(51mm)ofclearancewhenaseparateoverheaddoorholderisused.Standardmountingrequiresa2-5/8"(67mm)wide frame soffit. It may also be used where unusually high frame stops or weather-stripping prevent the use of other soffit plates.
Parallel Hold Open - #588 Adapter Plate:Thisadapterplate is supplied standard with all parallel arm hold open closers. It can also be used to convert regular arm or top jamb hold open arms to parallel arm installation. It can be mounted wheretheframesoffitisasnarrowas1"(25mm).
Flush Transom Hold Open - #589L Angle Bracket:Forusewhere rabbeted or flush transom conditions prevent installation of the standard 588 hold open adapter plate. It is used in combination with the 588 adapter plate.
brackets for hold open arms
2-1/2"(64mm)
3-1/2"(89mm)
1-1/2"(38mm)
3-1/2"(89mm)
3-1/2"(89mm)
1-15/16"(49mm)
3-1/2"(89mm)
2-9/16"(65mm)4-9/16"
(116mm)
3-1/2"(89mm)
2-1/2"(64mm)
1-1/2"(38mm)
Narrow Top Rail - #488 Drop Plate:Forusewhereanarrow top rail prevents the closer from being mounted directly to the door surface. This drop plate can be used to mountacloseronatoprailasnarrowas2-1/2"(64mm)inheight.
closer mounting plate
Narrow Frame - #890 Support Bracket:Forusewherethe frame is narrow, and the soffit plate cannot be mounted directly to the frame soffit or rabbet. Used in combination with the #891 spacer block on blade stop frames to provide extra support and needed clearance of the blade stop.
Clearance/Support Blade Stop - #891 Spacer Block:For use where the door frame has a blade stop and the soffit plate must be mounted on the frame rabbet. This accessory is used in combination with the standard spacer block to provide clearance of the blade stop.
Standard - #293S Spacer Block:Forusewhereanarrowframe soffit does not provide adequate support for the soffit plate. Supplied as standard with all parallel rigid arm closers.
Flush Rabbeted Transom - #293L Angle Bracket:Foruse where flush transom conditions prevent mounting of the standard soffit plate. This bracket is used in combination with the standard soffit plate.
brackets for non-hold open arms & hold open arms
1-1/4"(32mm)
3-1/2"(89mm)5/8"
(16mm)
31
400/4400 series door closers
parallel rigid arm
13-5/8"(346mm)
5-1/8"(130mm)
1/2"(13mm)
7/8"(22mm)
5/8"(16mm)
2-1/2"(64mm)
3-1/2"(89mm)
3"(76mm)
2"(51mm)
1-1/2"(38)
1-1/2"(38)
1/2"(30mm)
3-3/8"(86mm)
1"(25mm)
32
400/4400 series door closers
holder stop arms
Standard - #293S Spacer Block:Forusewhereanarrowframe soffit does not provide adequate support for the soffit plate.
Narrow Frame - #890 Support Bracket:Forusewherethe frame is narrow, and the soffit plate cannot be mounted directly to the frame soffit or rabbet. Used in combination with the #891 spacer block on blade stop frames to provide extra support and needed clearance of the blade stop.
Clearance/Support Blade Stop - #891 Spacer Block:For use where the door frame has a blade stop and the soffit plate must be mounted on the frame rabbet. This accessory is used in combination with the standard spacer block to provide clearance of the blade stop.
Narrow Top Rail - #488 Drop Plate:Forusewhereanarrowtop rail prevents the closer from being mounted directly to the door surface. This drop plate can be used to mount a closer on atoprailasnarrowas2-1/2"(64mm)inheight.
Flush Rabbeted Transom - #293L Angle Bracket:Foruse where flush transom conditions prevent mounting of the standard soffit plate. This bracket is used in combination with the standard soffit plate.
brackets for non-hold open arms & hold open arms
1-1/4"(32mm)
3-1/2"(89mm)5/8"
(16mm)
closer mounting plate13-5/8"(346mm)
5-1/8"(130mm)
1/2"(13mm)
7/8"(22mm)
5/8"(16mm)
2-1/2"(64mm)
3-1/2"(89mm)
3"(76mm)
2"(51mm)
1-1/2"(38mm)
1-1/2"(38mm)
1/2"(30mm)
3-3/8"(86mm)
1"(25mm)
Narrow Top Rail - #488 Drop Plate:Forusewhereanarrow top rail prevents the closer from being mounted directly to the door surface. This drop plate can be used to mountacloseronatoprailasnarrowas2-3/8"(60mm)inheight.
Additional Support - #6190 Reinforcing Bracket:Standardfor use with all Parallel Arm UNI Stop Door Controls. Provides additional support to the soffit plate on installations with door framerevealsfrom1-7/8"to4-5/8"(48to117mm).
Wide Frame - #6191 Reinforcing Kit:OptionalforusewithallParallelArmUNI Stop Door Controls. Used to support the soffit plate on installations with wide frames. Clamps may be used with or without the spacer block, depending on frame conditions.
Standard Installation - #486 Back Plate:Canbemountedwhereaframefaceisasnarrowas1-5/8"(41mm)inheight.
Minimum Ceiling Clearance - #487 Drop Plate:Forusewheretheceilingclearanceisaslittleas1-7/8"(48mm).
Flush Rabbeted Transom - #589L Angle Bracket:Optionalfor use with all Parallel Arm UNI Stop Door Controls. For use where rabbeted or flush transom conditions prevent installation of the soffit plate assembly. This bracket fastens to the overhead transom to provide a mounting surface for the soffit plate assembly.
closer mounting plate (for parallel arm)
closer mounting plates (for top jamb)
soffit plate reinforcing brackets (for parallel arm)
33
400/4400 series door closers
uni stop™ arm
13-5/8"(346mm)
5-1/8"(130mm)
2-1/4"(57mm)
2-1/4"(57mm)
5/16"(8mm) 2-1/2"
(64mm)
3-1/2"(89mm)
1-1/2"(38mm)
2-1/4"(57mm)
5/8"(16mm)
5/8"(16mm)
5/8"(16mm)
2-3/4"(70mm)
4-1/8"(105mm) Minimum
13-5/8"(346mm)
13-5/8"(346mm)
4-1/8"(105mm)
3-15/16"(100mm)
34
400/4400 series door closers
slide track
Slide Track - #486JP Back Plate:Requiredforframeswithstandard2"(51mm)profileface.Withoutplate,minimum4"(102mm)faceframerequired.
TrackReveal
Model Number Replaces
RP44-4040 LCN-4040
RP44-4010 LCN-4010
RP44-M2020 Rixson M2020
The retrofit plates allow a 4400 Institutional Door Closer to replace 4040 or 4010 closer without modifying the existing hole pattern in the door. The plates will work with regular and parallel arm applications.
Note: The location of the arm shoe on the frame will change, therefore the frame must be patched.
closer mounting plate
retrofit plates
13-3/8"(340mm)
3-7/8"(98mm)
Sex Nut/Sleeve Nut & Screw:“SNB” (4 per pack)
Door Thickness
SN's SNB's
1-3/4" SN-134 SNB134-47
2" N/A SNB200-47
2-1/4" SN-214 SNB214-47
S.S. SNB'S 1-3/4"
(Stainless Steel)
SN-134SS SNB134SS-47
Closer Series
Closer Covers
(Material)
ModelNumber
DimensionsInches (mm)
4004400TJ400TJ4400
Plastic 400P 13-3/4"(349)x4"(102)x2-1/8"(54)
4004400
Metal 400M 13-5/8"(346)x3-7/8"(98)x2-3/16"(56)
TJ400TJ4400
Metal TJ400M x
Hand
Door Thickness
TBGN's
1-3/8" TBGN138-47
1-3/4" TBGN134-47
Thru-Bolt & Grommet Nut:
“TBGN” (4 per pack)
ALUMINUM AND WOOD DOOR APPLICATION (ALUMINUM DOOR SHOWN)
STEEL DOOR APPLICATION
* Specify closer sizeLAP = Less All Parts
Model Number Description
4400LAP Multi Size Closer Body
40*LAP Sized Closer Body
406EPLAP Closer with Extra Power
4400SLAP Corrosion Resistant Body
Torx® Screw Packs
Arm Type 400/4400 Series
Regular, Parallel and Top Jamb TX47
Parallel Rigid, Holder/Stop,Holder/Stop Spring
PRTX47
Regular Rigid Heavy-Duty Arm RTX47
UNI Stop™ Arm UNITX47
specialty fasteners
Sex Nut/Sleeve Nut: “SN” (4 per pack)
35
400/4400 series door closers
door closer body assemblies
36
400/4400 series door closers
non-hold open arm assemblies
Closer SeriesComplete Arm
Assembly
Main Arm Assembly1
(includes 400-ES)Inches (mm)
Secondary Arm Assembly
(includes 400-ES)
Arm AssemblyLess Rod and
Shoe
Rod & Shoe Assembly2
Inches (mm)
400/4400 400-1400-1M(11)(279)
400-111400-1W
400-11 (8-7/8)(225)
TJ400/TJ4400 400-1A 400-121 400-11A (12-9/16)(319)
TJL400/TJL4400 400-1B400-2M
(13-1/2)(343)400-131 400-2W 400-11B (15-3/16)(386)
PA400/PA4400 400-5400-1M (11)(279)
400-115400-1W
400-15 (8-7/8)(225)
PA400/PA4400Æ 400-5A 400-115A 400-15A (12-9/16)(319)
4400400-25 (tri pack
includes 400-1 plus 289 plate)
1. C to C length shown in parentheses.2. C of connecting link to end of rod shown in parentheses.3. For 180° door swing when using a special template for doors hung on 6" to 8" (152mm to 203mm) wide throw hinges.
Note: Mounting hardware included with all parts orders.
Arm ShoeScrew
Arm Shoe
Arm ShoeSex Nut
Secondary Arm Assembly
Screw & WasherAssembly
400-ES
Rod & Shoe Assembly
(includes 400-AS)Arm AssemblyLess Rod & Shoe
Main Arm
Screw & WasherAssembly
400-ES
Soffit Plate289
Includes Screw & Washer Assembly(400-5 arm only)
Main Arm Screw 400-MAS
Arm Shoe Assembly
400-AS(400-1 arm only)
1. C to C length shown in parentheses.Note: Mounting hardware included with all parts orders.
Arm ShoeScrew
Arm Shoe
Arm ShoeSex Nut
Soffit Plate289A-SS
Includes Screw & Washer Assembly(400S-5 arm only) Arm Shoe
Assembly400S-AS
Secondary Arm Assembly
(includes 400S-AS)
Screw & WasherAssembly400S-ES
Main Arm
Screw & WasherAssembly
(400S-ES arm only)
Closer Series Complete Arm AssemblyMain Arm Assembly1
(length)(mm)(includes 400S-ES)
Secondary Arm Assembly (includes 400S-ES)
4400S 400S-1
400S-1M (11)(279)
400S-111
TJ4400S 400S-1A 400S-121
PA4400S 400S-5 400S-115
37
400/4400 series door closers
stainless steel arm assemblies
Main Arm Screw 400-MAS
38
400/4400 series door closers
hold open arm assemblies
Closer Series Complete Arm
Assembly
Main Arm1
(Length)(mm)(includes 400-ES)
Secondary Arm(includes 400-ES)
Main Arm & Rod Assembly
Holder Shoe & Loop Assembly
Adjusting Rod2
(Length)(mm)
1400/4410 400-3/400-83
400-1M(11)(279)
400-113/400-118(Reg.) / (Par.)
400-3W
400-13
400-31(7-3/8)(187)
TJ1400/TJ4410 400-3A 400-123 400-3WA 400-31A
(10-13/16)(275)
TJL1400/TJL4410 400-3B400-2M
(13 -1/2)(343)400-133 400-3WB
400-31B (12-7/8)(327)
1. C to C length shown in parentheses.2. C of connecting of connecting link to end of rod shown in parentheses.3. Same as 400-3 but includes #588 soffit adapter plate.
Note: Mounting hardware included with all parts orders.
400-13 Holder Shoe & Loop AssemblyJack Screw1543R
Friction Disk1554
Soffit AdapterPlate 588
(400-8 Arm Only)
Secondary Arm Assembly
Screw & Washer Assembly
400-ES
Adjusting Rod
Main Arm & Rod Assembly
Main Arm
400-HSSSet Screw
Lock Nut455
Main Arm Screw 400-MAS
Arm Function Complete Arm Assembly Jack Screw
Non-Hold Open PR400-5 N/A
Hold OpenPR400-8R (Right Hand) 1543R
PR400-8L (Left Hand) 1543L
Note: Mounting hardware included with all parts orders.
Lock Nut455
Hold Open
Jack Screw1543
(Handed) Friction Disk(not visible)
1554
Non-Hold Open
39
400/4400 series door closers
parallel rigid arm assemblies
40
400/4400 series door closers
holder/stop arm assemblies
Note: Mounting hardware included with all parts orders.
* These parts and screw pack are included with complete arm assemblies
Hold Open Arm Shown
Arm Function Complete Arm Package
Non-Hold Open 4020-5
Thumbturn Hold Open 4020T-8
Hole Plug*4020P
Removable Stop*4020S
Hold Open Control(4020T-8 Arm Only)
Note: Mounting hardware included with all parts orders.
* These parts and screw pack are included with complete arm assemblies
Non-Hold Open Arm Shown
Arm Function Complete Arm Package
Non-Hold Open 4030-5
Thumbturn Hold Open 4030T-8
Hole Plug*4020P
Kit*4030KIT
41
400/4400 series door closers
holder/stop spring arm assemblies
42
400/4400 series door closers
regular rigid heavy-duty arm assemblies
Note: Mounting hardware included with all parts orders.
Closer Series Arm Function Complete Arm Package
R400 / R4400
Non-Hold Open
R400-1
Furnished with standard fasteners
SCR400 / SCR4400*470-1
Furnished with Torx fasteners
* Refer to Security Closer Catalog
parallel applications
Note: Mounting hardware included with all parts orders.
Non-Hold Open
Hold Open
Main Arm
Main Arm
* Center to center length.
Complete Arm AssemblyDoor Width (cm)
Main ArmLength* (mm)
Non-Hold Open Hold Open
6100-11 6100-128"-32"(71- 81)
9-1/2"(241)
6100-13 6100-333"-41"
(84 - 104)11"
(279)
6100-14 6100-442"-48"
(107 - 122)12-1/2"
(318)
43
400/4400 series door closers
uni stop™ arm assemblies
44
400/4400 series door closers
uni stop™ arm assembliestop jamb applications
Note: Mounting hardware included with all parts orders.
Non-Hold Open
Hold Open
Complete Arm AssemblyFor Frame Reveals (mm)
Non-Hold Open Hold Open
J6100-4 J6100-7 2-1/8"-3-1/4"(54-83)
J6200-4 J6200-7 1/2"-2"(13-51)
J6400-4 J6400-7 3-3/8"-4-1/4"(86-108)
J6500-41 J6500-71 4-3/8"-5-3/8"(111-137)
J6500-42 J6500-72 5-1/2"-6-3/8"(140-162)
J6500-43 J6500-73 6-1/2"-7-3/8"(165-187)
J6600-4 J6600-7 0"-3/8"(0-10)
Note: Mounting hardware included with all parts orders.
Soffit Plate289
Includes Screw & Washer Assembly(2400-5 arm only)
Screw & WasherAssembly
400-ES
Arm Shoe Assembly
400-AS(Parts shownon page 36)
Main Arm & Rod Assembly
TubeAssembly
400-HSHex Screw
Arm ApplicationComplete Arm
Assembly
Main Arm & Adjusting Rod
Assembly
Tube & Shoe/Soffit Assembly
Regular Arm 2400-1
2400-1MR
2400-1TS (With 400-AS)
Parallel Arm 2400-52400-5TS (With 289)
Tri-pack 2400-25
45
400/4400 series door closers
low profile arm assemblies
46
400/4400 series door closers
track assemblies 400/4400ST & STP
Track AssembliesPart Number
Non-Hold Open Hold Open
Pull side mounted 400ST-1T 400ST-3T
Push side mounted 400ST-5T 400ST-8T
Pull side mounted (180°) 400ST-1T180 N/A
Spring Plate2
Buffer Spring2 (2 Required)
Roll Pin2 (2 Required)
End Cap2
400STEC(2 Required)
Stationary Block Assembly2
CushionBlock2
Roller Assembly1, 2
Slide Assembly2
400SLD
Slide Track Assembly(See Chart)
1. Hold Open Tracks Only
2. Part of Slide Track Assembly
Arm StudClip2
400ASC(included
when 400SLD is ordered)
Note: Mounting hardware included with all parts orders.
1. Includes arm length adjusting screw #400-ALAS2. Includes arm tube & adjusting rod assembly
Arm Tube Assembly400STP-1AT1
double egress arm assembly
standard arm assembly
Arm Tube Assembly400ST-1ATR1 (right hand)400ST-1ATL1 (left hand)
400PT-DE-1R (Right Hand)1, 2
400PT-DE-1L (Left Hand)1, 2
Adjusting Rod Assembly
Adjusting Rod Assembly 400ST-1AR1
400ST-1AT1 400ST-1AR1
400STP-1A1,2
Retaining Ring400ASR
Retaining Ring400ASR
Arm Stud400AS
Arm Stud400AS
Adjusting Rod Assembly 400ST-1AR1
Retaining Ring400ASR
Arm Stud400AS
Note: Mounting hardware included with all parts orders.
STP arm assembly
Arm Tube Assembly
47
400/4400 series door closers
track assemblies 400/4400ST & STP
Arm tube assembly
400ST-1A1,2
48
400/4400 series door closers
track assemblies 4400ST/4440ST
Adjusting Rod Assembly
440ST-1AR2Arm Tube Assembly
440ST-1A1, 2
1. Includes arm length adjusting screw2. Includes arm tube & adjusting rod assembly
400ST-1AT2
*Part of an Assembly Pack NHO= 440SLD HO= 440HSLD
Set Screw*
Stop Block*Cushion Block* Slider Assembly*Channel
Dowel Pin* Hold Open Spring* Set Screw*Screw*
Note: Mounting hardware included with all parts orders.
Slide Track Assembly
Description Non-Hold Open Hold Open
Pull side mounted 440ST-1T 440ST-3T
Push side mounted 440ST-5T 440ST-8T
arm assembly
Note: • Door closer warranty becomes void if it is installed on the exterior side of a door in the exterior wall of a building.• It is strongly recommended, and it is required on fire door assemblies, that doors having a door closer be hung on ball-bearing or anti-friction hinges or pivots.• Failure to use the correct type and size fasteners may void factory warranty.• Fasteners for fire/smoke door assemblies must conform to NFPA 80. In some applications additional fasteners may be mandated by NFPA 80 that are not shipped with Yale’s standard product, such as sleeve nuts (sex nuts) or through bolts and grommet nuts. • If other fasteners are required, the factory must be consulted to determine if those fasteners can be provided. If the fasteners can be supplied, this information must be clearly stated on the purchase order.• Contact factory if door weight exceeds 250 lbs.
Type of Installation: None–Installsregulararm,topjambto3"reveal TJ–Topjamb,reveals2-3/4"to7",150°opening. TJL– Topjamb,reveals2-3/4"to7",180°opening TJS–Topjamb,reveals0-3"handed.(Non-holdopenclosersonly) J – Top jamb mount slide track closers only P – Push (stop) side slide track only PA – Parallel arm PR – Parallel Rigid arm PRO – Parallel Rigid Offset arm R – Regular Rigid heavy-duty arm (Torx® screws not included) UNI – UNI Stop™ arm (parallel arm only – specify door width) UNIJ – UNI Stop arm (top jamb only specify frame reveal)
CB – Coupon booth hold open; Handed; 402CB & 403CB only. H – Hospital hold open; Handed; 1403H & 1404H only. TB – Telephone booth function; 402TB only. M – Metal cover (cover is handed for top jamb applications) ST – Slide track (sizes 4, 5 or 6) ST-180 – Slide track 180° opening, without spring buffer. Max. opening for hinge (pull) side mounting. DL – Delayed action DE – Double egress (slide track pull side only). Handed. EBC – Enhanced backcheck EP – Extra power STP – Slide arm pocket door; 406STP only EPSTP – Extra power, slide arm pocket door; 406EPSTP only DLP – Double lever pocket door; 406DLP only EPDLP – Extra power double lever pocket door; 406EPDLP MLL – Lead lined metal cover – specify handing for top jamb applications
40 – 400 Series44 – 400 Series, Low Profile, Slide Track, NHO45 – 400 Series, Low Profile, Slide Track, HO
PR PREFIX
FINISHRefer to page 2
SUFFIXES40
SIZED CLOSER X
“2” – ANSI size 2“3” – ANSI size 3“4” – ANSI size 4“5” – ANSI size 5“6” – ANSI size 6
3CLOSER SIZE
Arm Function: None – Non-hold open1 – Hold open2 – Low profile, non-hold open
FUNCTION
49
400/4400 series door closers
how to order
50
400/4400 series door closers
how to order 4400 series
Note: • Door closer warranty becomes void if it is installed on the exterior side of a door in the exterior wall of a building.• It is strongly recommended, and it is required on fire door assemblies, that doors having a door closer be hung on ball-bearing or anti-friction hinges or pivots.• Failure to use the correct type and size fasteners may void factory warranty.• Fasteners for fire/smoke door assemblies must conform to NFPA 80. In some applications additional fasteners may be mandated by NFPA 80 that are not shipped with Yale’s standard product, such as sleeve nuts (sex nuts) or through bolts and grommet nuts. • If other fasteners are required, the factory must be consulted to determine if those fasteners can be provided. If the fasteners can be supplied, this information must be clearly stated on the purchase order.• Contact factory if door weight exceeds 250 lbs.
Type of Installation:
None–Installsregulararm,parallelarmortopjambto3"reveal
TJ–Topjambreveals2-3/4"to7",(non-holdopenclosers), reveals2-3/4"to6-3/4"(Holdopenclosers)150°opening
TJL–Topjamb,reveals2-3/4"to7"(non-holdopenclosers) reveals2-3/4"to6-3/4"(Holdopenclosers)180°opening.
TJS–Topjamb,reveals0-3",handed.(Non-holdopenclosersonly)
P – Push (stop) side slide track only
PA – Parallel arm
PR – Parallel Rigid arm
PRO – Parallel Rigid Offset arm
R – Regular Rigid heavy-duty arm (Torx® screws not included – N/A in stainless steel)
UNI – UNI Stop™ arm (parallel arm only – specify door width)
UNIJ – UNI Stop arm (top jamb only specify frame reveal)
M – Metal cover (cover is handed for top jamb applications) N/A w/ corrosion resistant closer S – Corrosion resistant DL – Optional delayed action feature ST – Pull side slide track ST-180 – Slide track 180° opening without spring buffer. Max. opening for hinge (pull) side mounting. DE – Double egress (slide track pull side only). N/A w/corrosion resistant closer handed EBC – Enhanced backcheck MLL – Lead lined metal cover – specify handing for top jamb applications
PRPREFIX
FINISHRefer to page 2
SUFFIXES
44 – 4400 Series
44MULTI-SIZED
CLOSERX
0 – Power Range 1 through 6
0CLOSER SIZE
Arm Function: 0 – Non-hold open1 – Hold open8 – Low profile, non-hold open
1FUNCTION
Note: • Door closer warranty becomes void if it is installed on the exterior side of a door in the exterior wall of a building.• It is strongly recommended, and it is required on fire door assemblies, that doors having a door closer be hung on ball-bearing or anti-friction hinges or pivots.• Failure to use the correct type and size fasteners may void factory warranty.• Fasteners for fire/smoke door assemblies must conform to NFPA 80. In some applications additional fasteners may be mandated by NFPA 80 that are not shipped with Yale’s standard product. • If other fasteners are required, the factory must be consulted to determine if those fasteners can be provided. If the fasteners can be supplied, this information must be clearly stated on the purchase order.• Contact factory if door weight exceeds 250 lbs.
None – Non-hold open M – Metal cover (cover is handed for top jamb applications) T – Thumbturn hold open DL – Delayed action MLL – Lead lined metal cover – specify handing for top jamb applications
40 – 400 Series Closer Body (Sized)44 – 4400 Series Closer Body (Multi-sized)
FINISHRefer to page 2
SUFFIXES40
SERIES X
“0” – Multi-size closer, Normal range (sizes 1-6)“2” – ANSI size 2“3” – ANSI size 3“4” – ANSI size 4“5” – ANSI size 5“6” – ANSI size 6
4CLOSER SIZE
2ARM
2 – Holder/Stop3 – Holder/Stop Spring
51
400/4400 series door closers
how to order holder/stop & holder stop spring assemblies
400/4400 series door closers
online literature and templates
Yale Locks & Hardware is a division of Yale Security Inc., an ASSA ABLOY Group company.
Yale® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company. Uni Stop™ is a trademark of Yale Security Inc., an ASSA ABLOY Group company. KeyMark® and Security Leg® are registered trademarks of Medeco Security Locks, Inc., an ASSA ABLOY Group company. Other products' brand names may be trademarks or registered trademarks of their respective owners and are mentioned for reference purposes only. These materials are protected under U.S. copyright laws. All contents current at time of publication. Yale Security Inc. reserves the right to change availability of any item in this catalog, its design, construction, and/or its materials. Copyright © 2001, 2011, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc., an ASSA ABLOY Group company is prohibited.
YALE, with its unique global reach and range of products, is the world’s favorite lock.
ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience.
42081-12/11R
An ASSA ABLOY Group brand
ForthelatestinformationonYaleLocks&Hardwareproducts,visitourwebsiteat:www.yalelocks.com
Clickonthe“ProductInformation”buttontofind:
• Catalogs• Partsmanuals• Templates• Specifications• Installationinstructions
Yale®customerscanclickontheebusinesssymbolonthewebsitetoregisterforanebusinessaccountto:
• Checkthestatusoforders• CheckavailabilityofQuick-Shipitems• Trackyourorderandconfirmdelivery• Receiveemailnotificationoftemplatechanges And More...
Orcontactusat:
U.S.A.Yale Locks & Hardware
Address:100YaleAvenue,LenoirCity,TN37771-3226Tel:1-800-438-1951•Fax:1-800-338-0965•www.yalelocks.com
Canada:ASSA ABLOY Door Security Solutions Canada
Address:160FourValleyDrive,Vaughan,OntarioL4K4T9Tel:1-800-461-3007•Fax:1-800-461-8989•www.assaabloy.ca
International:ASSA ABLOY Americas International
Tel:1-905-821-7775•Fax:1-905-821-1429•www.assaabloyai.com