40ft Combi Hook Lifts
Series CHL-40
11/2018
Australian Innovation Patent # 2018100751
Options and customized appliances are available on request. We retain the right of technical alterations without prior notice.11/2018
Features
Lifting Capacity: 35 tons (on request: up to 80 tons) Supplied as Mounting Kit or fully mounted on semi-trailer or low bed semi-trailer
Structure completely made of wear resistant & high-tensile Steel Weldox 700
Rotating & telescopic, hydraulic lift arm with hook - made of Steel Weldox 700 (Yield strength of 700 kgs/mm)
Length: 13,138 mm - Width: 2,550 mm (on request: up to 3,200 mm) Tare weight: ca. 6,000 kgs - Lifting angle: ca. 18°
High-tensile steel frame with double C-shaped block Sturdy, sliding cart with reinforced hook post base - made of Steel Weldox 700
Hydraulically operated, external front & rear lockings for subframes with 1,060 mm & 2,400 mm width
Suitable for 40ft ISO Containers Type 1AA/1AAA & 40ft Hook Lift Containers, Platforms, Tank Containers etc.
Loading/Unloading time: approx. 2 minutes/per cycle
Detachable ISO Spreader with storage legs & locking pins - made of Steel Weldox 700
Options and customized appliances are available on request. We retain the right of technical alterations without prior notice.11/2018
Features
Three-part, hydraulically operated rear roll stabilizers - made of Steel Weldox 700 Foldable rear roller bearings for 40ft ISO Containers & six-part rear rollers for 40ft Hook Lift ContainersPneumatically operated hook safety latch
Radio Control Quick couplings & emergency solenoid safety devices
On request: 45ft ISO versions for containers type 1EE & 1EEE On request: Tilting cylinder for dumping containers with an angle of 45° & Layout acc. to ADR-S
CE Certificate acc. to EU Machinery Directive 2006/42/CE
Robust, double hydraulic motors with flanges for chain drive Wear resistant 3/4" triple chain with a capacity of around 15,000 kgs
Required hydraulic oil tank: Min. 140 l volume Required hydraulic oil pump: 70 l/min - Max. working pressure: 350 bar - Average working pressure: 250 bar
Detachable ISO Spreader with Storage Legs
Options and customized appliances are available on request. We retain the right of technical alterations without prior notice.11/2018
Upper Corner Casting
Locking Pin
Foldable Corner Casting
Locking Pin
Hook Eye
Foldable Storage Leg
Tilting Cylinder for Dumping (Option)
Options and customized appliances are available on request. We retain the right of technical alterations without prior notice.11/2018
Hook Post
Tilting Cylinder
Detachable
ISO Spreader
Foldable Rear Roller Bearings (ISO Containers)
with Twist Locks
plus Rear Roller Bearings (Hook Lift Containers)
Options and customized appliances are available on request. We retain the right of technical alterations without prior notice.11/2018
Integrated Twist Lock
Foldable Rear Roller
Bearing
Rear Roller Bearing
Tilting Cylinder
Options and customized appliances are available on request. We retain the right of technical alterations without prior notice.11/2018
Safe & Hydraulically Adjustable Lockings
Hydraulically Adjustable Rear Roll Stabilizer
Options and customized appliances are available on request. We retain the right of technical alterations without prior notice.11/2018
Options and customized appliances are available on request. We retain the right of technical alterations without prior notice.11/2018
Powerful Hydraulically Adjustable Hook Post
Sliding Telescopic Hook Lift Arm
Options and customized appliances are available on request. We retain the right of technical alterations without prior notice.11/2018
Hydraulic Drive & Chain/Belt
Options and customized appliances are available on request. We retain the right of technical alterations without prior notice.11/2018
Sturdy, Sliding Cart
Options and customized appliances are available on request. We retain the right of technical alterations without prior notice.11/2018
Reinforced Hook Post Base
Options and customized appliances are available on request. We retain the right of technical alterations without prior notice.11/2018
Loading/Unloading = within approx. 2 minutes
Options and customized appliances are available on request. We retain the right of technical alterations without prior notice.11/2018
Options and customized appliances are available on request. We retain the right of technical alterations without prior notice.11/2018
Rear Roll Stabilizer
Hydraulic Lockings
Foldable Rear Rollers
Rear Roller Bearings
Telescopic Hook Post
Tilting Cylinder
Hydraulic Motors
Detachable ISO Spreader
Hook Arm
ContiLift CHL-40
Options and customized appliances are available on request. We retain the right of technical alterations without prior notice.
CHL 40/35-L
Model Lifting Capacity
35 tons
Container Lengths
up to 12,191 mm
Tare Weight
11/2018
ca. 6,000 kg
Series CHL-40 (40ft Combined Hook Lift)
Container Width
2,500 mm
CHL 40/35-LT* 35 tons up to 12,191 mm 2,500 mm ca. 6,200 kg
CHL 40/45-L CHL 40/60-L
45 tons
60 tons
up to 12,191 mm
up to 12,191 mm
> 3,200 mm
> 3,200 mm
ca. 6,200 kg
ca. 6,300 kg
LT* = Tilting Cylinder for dumping
All versions also available for 45ft (13,716 mm) ISO Containers (High Cube), Hook Lift Containers, Platforms etc.
ContiLift OÜ in Estonia are one of the leading specialists for innovativeengineering and supply of custom-engineered, high-performance
20'/40' ISO Container Hook Lifts & 40' Heavy Duty Hook Lifts in a rangefrom 20 tons up to 80 tons as well as of 20' ISO Hook Lift Adapter Kits -
distributed worldwide under the brand ContiLift and qualified foroperations in tough environmental conditions. This has proved to be
true in the past by satisfied customers being involved in the businessesof mining, scrap recycling, waste disposal & transport logistics.
Since 2009 we have developed and/or delivered customized &
standard products as fully mounted units or prefabricated modules,which are assembled - acc. to your requirements - by contractual
partners in Northern Italy with CE Certificate.
Here, at ContiLift OÜ, we have daily the target to develop, produceand distribute more intelligent, cost-effective and durable solutions in
regard to equipment, which really eases the work of transport logistics !
11/2018
11/2018
Progress by Innovations !
20ft ISO Hook Lifts
40ft ISO Hook Lifts
Customized Hook Lifts
40ft Heavy Duty Hook Lifts
Semi-Trailer Hook Lifts
20ft ISO Adapter Kits
11/2018
ContiLift
Distributor &
Workshop
Network
ContiLift OÜ
Männimäe, Pudisoo küla, Kuusalu vald, Harju maakond, 74626, Estonia/EU
Central Phone: +886 - (0)6 - 78 73 708 * Mobile: + 886 -(0)9 - 33 34 67 53
Email: [email protected] * [email protected]
Website: www.contilift.com & www.eos-enviro.com
Registry Code: 14544206 at Tartu County Court
Dealer:
11/2018