+ All Categories
Home > Documents > 4150 bulletin prntr - Bid on Equipment files/ITT Goulds 4150 Process Pumps... · Goulds 4150...

4150 bulletin prntr - Bid on Equipment files/ITT Goulds 4150 Process Pumps... · Goulds 4150...

Date post: 30-Apr-2020
Category:
Upload: others
View: 14 times
Download: 0 times
Share this document with a friend
12
Goulds 4150 Process Pumps designed for corrosive services
Transcript

Goulds 4150 Process Pumps designed for corrosive services

Goulds 4150

2

Goulds Model 4150 is designedspecifically to provide superior

performance for the corrosive servicesof the Chemical Process Industries.

Goulds 4150 FRPprocess pumps designedfor corrosive services◆ Capacities to 5000 GPM (1130 m3/h)

◆ Heads to 490 feet (150 m)

◆ Temperatures to 212˚ F (100˚ C)

◆ Pressures to 200 PSIG (1379 kPa)

Performance featuresfor corrosive services◆ Fiberglass Reinforced Vinyl Ester Resin

• Continuous Strand construction providesexceptional strength.

◆ Ease of Maintenance• External impeller adjustment• ANSI/ASME B73.1 Conformance

◆ Optimum Hydraulic Performance• Single or Double Volute Casing

ServicesHydrochloric Acid Unloading

Ferric Chloride

Sulfuric Acid Transfer

Sodium Sulphite

Sulphate Liquors

Filter Feed

Goulds 4150

3

Thermoset FiberglassReinforced Plastic (FRP)Thermoset materials outperform other materials such asthermoplastics in chemical resistance, thermal stability andoverall durability.

Fiberglass reinforced plastic is increasingly being used in thepump industry for its easy handling, efficient flow, strengthand stability. Using a controlled placement of continuous-strand fiberglass mat in high stress areas providescomponents with excellent durability and corrosion resistance.

Integral Impeller and SleeveSemi-open impeller with pump-out vanes and balance holesdesigned to minimize axial unbalance and lower stuffingbox pressure.

The integral impeller and sleeve design requires no shaft sleeveo-rings. Separate sleeve and impeller with o-ring is available asan option.

DESIGNED FOR MAXIMUM CORROSION RESISTANCE

Single Outside Seal Crane 8B2

Single Outside Seal Flowserve RAC Double Inside Seal Crane type 8-1T Double Inside Seal Flowserve RXO

A wide range of sealing arrangements is readily available tomeet specific service requirements. For corrosive fluid handling,single outside and double inside seals are recommended.The single outside seals have non-metallic wetted parts and allmetal components are located outside the pump. The doubleinside mechanical seals have metallic parts that are exposed tobuffer fluid only and are designed to limit the process fluidcontact to non-metallic components. Your Goulds representativecan recommend the best solution for any application.Some commonly used sealing arrangements are illustrated.

Sealing Flexibility

Goulds 4150

4

Internal Cover FlushRemoves seal heat by circulating high pressure liquid internallythrough the drilled cover to the seal chamber and back to thelow pressure side of the pump.

This option eliminates the need for external flushing of singlemechanical seals from the pump discharge, which also eliminatesthe possible breakage of external tubing and fittings.

LowPressureLiquid

HighPressureLiquid

When properly installed and operated as referencedbelow, the flush system will ensure that the mechanicalseal is operating in the proper environment and is beingcooled and lubricated as required.

◆ Flush water is brought to the inlet side of the systemand piped away to a suitable drain on the outlet side.

◆ The normally closed solenoid valve is wired into themotor starter controls and opens when the motoris energized.

◆ The inlet shut-off valve remains open at all times andis used only when the system needs to be isolated formaintenance purposes.

◆ The flow meter / metering valve is adjusted asnecessary to obtain a reading of 1/4–1/2 GPM.

Flush In

Shut OffValve

1/4 NPT

Flush Out

1/4 NPT

PressureGauge0 – 60 PSI

Flowmeterw/Metering

Valve

Solenoid Valve110 VAC 60HZ

Normally Closed

Mechanical SealGland

Optional Flush Assembly Package(Intended for use on pumps with double inside mechanical seals)

SEAL FLUSHING ARRANGEMENTS

Goulds 4150

5

Sectional View 4150

Materials of Construction

Goulds Part No. Part Name Material

100 Casing Fiberglass Reinforced Vinyl Ester

101 Impeller Fiberglass Reinforced Vinyl Ester

108 Frame Adapter Cast Iron

112 Thrust Bearing Double Row Angular Contact Conrad

113A Breather Steel

113B Fill Plug Steel

122 Shaft 303SS

126 Shaft Sleeve Fiberglass Reinforced Vinyl Ester

134 Bearing Housing Cast Iron

136 Bearing Locknut and washer Steel

168 Radial Bearing Single Row Deep Groove

228 Bearing Frame Cast Iron

241 Frame Foot Cast Iron

250 Gland Fiberglass Reinforced Vinyl Ester

319 Oil Sight Glass Steel / Glass

332A Labyrinth Seal (Outboard) Nickel Plated Bronze

333A Labyrinth Seal (Inboard) Nickel Plated Bronze

353 Bolt-Gland to Casing 303SS

356A Bolt-Casing to Frame or Frame Adapter 303SS

360Q Gland Gasket Viton

361A Snap Ring Steel

370F Bolt-Foot to Frame Steel

383 Mechanical Seal Carbon / Ceramic

408A Drain Plug Steel

412A O-ring - Impeller (when provided) Viton

412V O-ring - Casing/Backplate Viton

418 Jacking Bolt 303SS

444 Backplate Fiberglass Reinforced Vinyl Ester

496 O-ring - Bearing Housing Buna

100

412V

250

89B

383

360Q

101

444

418108333A168113A361A496

113B 353126 356A

408A

319241370F112228134

136

122

332A

370D

6

Model 4150

EXTERNAL IMPELLERADJUSTMENTAllows field setting of impeller-to-casing clearance.

HEAVY-DUTY SHAFTMinimizes deflection to maximizemechanical seal life.

LABYRINTH OIL SEALSNickel-plated bronze for longer life.Improved oil containment.

POLYESTER THERMOSETPOWDER-COATEDPOWER FRAMECoating prevents external corrosion.

LARGE CAPACITY BEARINGSEnsures operating life well in excessof the minimum specified byANSI/ASME B73.1.

Splitter

Cutwater

DUAL VOLUTE CONFIGURATIONFor reduction of radial loads for high flowpump sizes. (See Construction Details tableon page 8 for applicable sizes.)

7

ANSI/ASME B73.1CONFORMANCE

Ensures maximuminterchangeability with existing

metal ANSI pumps, therebyeliminating any need for piping

or foundation changes when up-grading an installation.

SMOOTH HYDRAULICPASSAGES

Promotes increased pumpefficiency.

SINGLE ONE-PIECEGUSSETED CASING

Reinforced for maximum strengthin tough services.

IMPELLERPUMP-OUT VANES

Vanes and relief holes minimizeaxial unbalance and lower

stuffiing box pressure.

ALLOY INSERT(Integrally molded with impeller)

Rounded edges carry impellertorque loads with low stress.

VERSATILE CASING COVERSuitable for use with most

single outside or double insidemechanical seals without

modifications.

CONTINUOUS-STRANDFIBERGLASS

CONSTRUCTIONFor all wetted parts in vinyl ester.

Provides maximum corrosionresistance for a wide range of

corrosive liquids.

CASING THROUGH-BOLTSMaintain casing o-ring sealintegrity under all hydraulic

operating conditions.

INTEGRAL SHAFTSLEEVEDesign eliminatesgaskets and o-ringsand protects thepump shaft fromexposure to theprocess fluid.

Goulds 4150

8

Construction Details All dimensions in inches and (mm) unless otherwise specified.

Pump Size1

x 1.

5 - 6

1.5

x 3

- 6

2 x

3 - 6

1 x

1.5

- 8

1.5

x 3

- 8

2 x

3 - 8

3 x

4 - 8

1 x

2 - 1

0

1.5

x 3

- 10

2 x

3 - 1

0

3 x

4 - 1

0

4 x

4 - 1

0

4 x

6 - 1

0

2 x

3 - 1

3

3 x

4 - 1

3

4 x

6 - 1

3

6 x

8 - 1

3

8 x

10 -

15

ANSI Designation AA AB AC AA A50 A60 A70 A05 A50 A60 A70 — A80 A30 A40 A80 A90 A120 —

Maximum Sphere Size 0.375 0.500 0.500 0.313 0.313 0.625 1.000 0.188 0.375 0.375 0.625 0.750 1.000 0.313 0.500 1.000 1.125 1.750 1.375(9.53) (12.70) (12.70) (7.95) (7.95) (15.90) (25.40) (4.78) (9.53) (9.53 (15.90) (19.05) (25.40) (7.95) (12.70) (25.40) (28.60) (44.45) (35.00)

Impeller Front 0.015 (0.38) 0.020 (0.51) 0.025 (0.64)Clearance Back 0.045 (1.14) 0.040 (1.02) 0.035 (0.89)

Casing Thickness 0.500 0.750 0.625 0.75 0.625 1.125 0.750 1.250 1.375(min) (12.70) (19.05) (15.90) (19.05) (15.90) (28.60) (19.05) (31.75) (35.00)

Volute Single Double Single Double Single Double

Diameter at Impeller 0.750 1.250 1.500(19.05) (31.75) (38.10)

Diameter Under 1.125 1.750 2.500Sleeve (28.60) (44.45) (63.50)

Diameter at Bearings 1.375 / 1.375 1.968 / 1.771 2.755 / 2.755IB/OB (35.00 / 35.00) (50.00 / 45.00) (70.00 / 70.00)

Diameter Between 1.625 2.250 3.250Bearings (41.30) (57.15) (82.55)

Bearing Span 3.790 7.090 10.250(96.30) (180.10) (260.35)

Diameter at Coupling 0.875 1.125 2.375(22.22) (28.60) (60.33)

Bearing No. Inboard 307MZC3 310MZC3 6314ZC3

Bearing No. Outboard 5207AZC3 5309EZC 5314ZC3

Maximum Shaft 1.14 HP 4.00 HP 14.80 HPHorsepower per (0.85 KW) (2.98 KW) 11.04 (KW)

100 RPM

L-10 Life Minimum 3 Years (26,280 hours)

L3/D4 152 46 32

Bearing Frame Group I II III

Oil Capacity 0.375 pint 2.000 pint 5.000 pint(0.18 l) (0.95 l) (2.37 l)

Sleeve (O.D) 1.375 2.125 2.875(35.00) (54.00) (73.05)

Stuffing Box Bore 2.000 2.875 3.75(50.80) (73.02) (95.25)

Maximum Depth 2.750 3.250 3.500of Box (69.85) (82.55) (88.90)

Packing Size 5/16 x 5/16 3/8 x 3/8 7/16 x 7/16(7.94 x 7.94) (9.52 x 9.52) (11.11 x 11.11)

Distance to 3.140 3.980 4.870First Obstruction (79.76) (101.10) (123.70)

CASI

NG

SHAF

T AN

D BE

ARIN

G DA

TABO

X DA

TA

10 x

12

- 16

Goulds 4150

9

Hydraulic Coverage Charts – 60 Hertz

1x11/2-611/2 x3-6

2x3-6

3x4-8

2x3-811/2 x3-81x11/2 -8

1x2-10

2x3-13

11/2 x3-102x3-10

3x4-10 4x4-10

4x6-10

3x4-13

4x6-136x8-13

8x10-15

10x12-16

(1) (2) (3) (5) (10) (15) (20) (30) (40) (60) (80)( 100) (150) (200)

CAPACITY – GPM (m3/hr)

0 10 20 30 50 100 150 200 300 500 1000 2000 4000 6000

(300) (500) (700) (1000) (1500)

150

100

80

6050

40

30

20

10

5

(35)(30)(25)(20)

(15)

(10)

(5)

(2)

TOTA

L H

EAD

– F

T (m

)

(1) (2) (3) (5) (10) (15) (20) (30) (40) (60) (80) (100) (150) (200)

CAPACITY – GPM (m3/hr)

0 10 20 30 50 100 150 200 300 500 1000 2000 4000 6000

(300) (500) (700) (1000) (1500)

250

200

150

100

80

605040

30

20

10

(70)(60)(50)

(40)

(30)(25)(20)

(15)

(10)

(5)

TOTA

L H

EAD

– F

T (m

)

1x11/2-6

11/2x3-6

2x3-6

3x4-8

2x3-811/ 2 x3-81x11/2-8

1x2-10

2x3-13

11/2 x3-102x3-10

3x4-10 4x4-10

4x6-10

3x4-134x6-13 6x8-13

8x10-15

(1) (2) (3) (5) (10) (15) (20) (30) (40) (60) (80)

CAPACITY – GPM (m3/hr)

0 5 10 20 30 40 50 100 150 200 300 500 1000 2000

(100) (150) (200) (300)

600500

400

300

200

150

100

80

6050

40

30

20

(150)

(120)(100)

(80)

(60)(50)

(40)

(30)(25)

(20)

(15)

(10)

(8)

TOTA

L H

EAD

– F

T (m

)

1x11/2-6 11/2x3-6

2x3-6

3x4-8

11/2 x3-81x11/2-8

1x2-1011/2 x3-10

2x3-10 3x4-10

4x4-102x3-8

1150 RPM

1750 RPM

3500 RPM

Goulds 4150

10

Hydraulic Coverage Charts – 50 Hertz

5 10 15 20 30 40 60 80 100 150 200 300 400 600

CAPACITY – GPM (m3/hr)

0 (1) (2) (3) (4) (6) (8) (10) (15) (20) (30) (40) (60) (100) (150) (200

1000 2000 3000 5000

(50)

(40)

(30)

(20)

(15)

(10)

(8)

(6)

(4)

(3)

(2)

150

120100

80

6050

40

3025

20

15

10

7

TOTA

L H

EAD

– F

T (m

)

)� (300) (500) (700) (1000)

1x11/ 2 -6

11/2 x3-6

2x3-6

3x4-8

2x3-811/2x3-81x11/2 -8

1x2-10

2x3-13

11/2 x3-102x3-10

3x4-10 4x4-10

4x6-10

3x4-134x6-13 6x8-13

8x10-15

5 10 15 20 30 40 60 80 100 150 200 300 400 600

CAPACITY – GPM (m3/hr)

(0) (1) (2) (4) (6) (8) (10) (15) (20) (30) (40) (60) (80

1000 1500

� )(100) (150) (200) (300)

(150)

(100)

(80)

(60)

(40)

(30)

(20)

(15)

(10)

(8)

(6)

(4)

(3)

500

40

300)

250

200

150

120100

80

6050

40

30

25

20

15

10

TOTA

L H

EAD

– F

T (m

)

1x11/2-6 11/2x3-6

2x3-6

3x4-8

2x3-811/2 x3-8

1x11/2 -8

1x2-1011/2 x3-10

2x3-10

3x4-10

4x4-10

1450 RPM

2900 RPM

Goulds 4150

11

Interchangeability

Extensive interchangeability simplifies spare parts stocking requirements

Casing

Impeller

Cover

Adapter

BearingFrame

Form B4150 11/05© 2005 Goulds Pumps, Incorporated

A subsidiary of ITT Industries, Inc.

Visit our website at www.gouldspumps.com

CP

F

YV

X

D

E1 E2

øH

U

Pump Size

1 x

1.5

- 6

1.5

x 3

- 6

2 x

3 - 6

1 x

1.5

- 8

1.5

x 3

- 8

2 x

3 - 8

3 x

4 - 8

1 x

2 - 1

0

1.5

x 3

- 10

2 x

3 - 1

0

3 x

4 - 1

0

4 x

4 - 1

0

4 x

6 - 1

0

2 x

3 - 1

3

3 x

4 - 1

3

4 x

6 - 1

3

6 x

8 - 1

3

8 x

10 -

15

ISO DIN Flange Availability NO NO YES NO NO YES YES YES NO YES YES YES YES NO YES YES YES YES YES

JIS Flange Availability NO NO YES NO NO YES YES YES NO YES YES YES YES NO YES YES YES YES YES

CP 171/2 231/2 337/8 351/8(445) (597) (860) (892)

D 51/4 81/4 10 141/2 18(133) (210) (254) (368) (457*)

X 61/2 81/2 91/2 11 81/2 91/2 11 121/2 131/2 111/2 121/2 131/2 16 19 26(165) (216) (242) (280) (216) (242) (280) (318) (343) (292) (318) (343) (406) (483) (660)

F 171/4 121/2 183/4 173/4(184) (318) (476) (451*)

U7/8 11/8 23/8

(22.23) (28.58) (60.33)

Keyway3/16 x 3/32 1/4 x 1/8 5/8 x 5/16

(4.76 x 2.38) (6.35 x 3.18) (15.88 x 7.94)

Y 4 6 7(102) (152) (178)

10 x

12 - 1

6

*Front mounting holes 1" to rear of discharge centerline

E1 is for casing hold down bolts. E2 is for frame hold down bolts.

Dimensions All Dimensions are in inches and (mm).

2E16 93/4 16 22

(152) (248) (406) (559)

2E20 71/4 9 14

(0) (184) (229) (356)

H5/8 5/8 7/8 1

(16) (16) (22) (25)


Recommended