The 4800R is a closed-circuit plant that was developed for quick jobs with 6 run on jack legs. With a self-contained diesel that can be put in place and begin crushing quickly. The rear discharge conveyor on this plant is ideal for the recycling industry because it allows the material to flow naturally through the impactor and then onto a pan feeder and gently introduced into the conveyor belt. The cross belt magnet will help eliminate steel and any other tramp that might be present. The newly introduced 6’x14’ screen is now properly sized to optimize this plant’s true potential.
4800R IMPACTOR PLANT
• Andreas type impact crusher design
• Highly cubical product
• High ratio of reduction
• Hammers have four crushing positions to maintain a more consistent gradation and greater top size control
• No weld build-up required
• One gravity and one spring loaded curtain with optional third grinding curtain
• Inspection doors on side of machine.
lippmann-milwaukee.com 800.648.0496
4800R
SPECIFICATIONS
• Six (6)Run-on jack
legs
• NEMA - 12 motor
control center
• Cross conveyor
under grizzly
• Diesel engine • Tire bulkheads
OPTIONS AVAILABLE
ImpactorDischarge ConveyorFeederPan FeederScreen SizeFeeder Size
42”x48”48”24”48”x72”6’x14’47”x16’
HORSEPOWERImpact CrusherFeederDischarge ConveyorReturn ConveyorScreenPan FeederCross ConveyorUnderscreen ConveyorMagnet Conveyor
25060207.530x2 2.55.5103
TRANSPORTATION DIESELTiresRear axleKing PinTotal
11 R22.579,50048,250
127,750
Number of DecksCross ConveyorCross ConveyorUnderscreen ConveyorReturn Conveyor
224”x8’5”24”x8’5”48”x15’10”24”x32’6”
OPTIONAL DIESELDiesel HPGeneratorDiesel
416175KwCat C9.3B
lippmann-milwaukee.com 800.648.0496
TRANSPORTATION ELECTRICRear axleKing PinTotal
80,000 lbs43,500 lbs123,500 lbs