Copyright © 2015 Flint & Walling 1

®

FW10530315

Supersedes0213Line Overview

Catalog

4”, 6” & 8” Submersible Pumps, Pump Motors, Controls, Jet Pumps, Centrifugal Pumps, Specialty Pumps and Water Conditioning

• “S” Commander® series with stainless steel shell, suction & discharge housing - 5 thru 85 GPM

• “A” Captain® series with stainless steel shell and cast iron suction & discharge housing - 5 thru 85 GPM

• “G” series with coated carbon shell and cast iron suction & discharge housing - 5 thru 27 GPM

• “P” series with stainless steel shell and glass-filled noryl mounting ring and discharge

• Stainless steel pump shell*• Stainless steel hex drive, pump

shaft and coupling• Stainless steel or corrosion

resistant screen and cable guard• NEMA standard motor mounting

ring• Field replaceable cartridge

assembly, lead guard, motor and motor lead wire assembly

• Stainless steel, NEMA Flint & Walling motors

• * “G” series utilizes powder coated carbon steel pump shell.

Low, medium and high capacity submersible pumps for home, farm industry and other domestic or commercial applications

For more information on all products, visit www.flintandwalling.com

4” Submersible Pumps1/2 to 7 1/2 HP • 5 to 85 GPM

Series “4F”Stainless Steel, Plastic or Cast Iron Fitted

Using a majority of Made in Americamaterials and components

Submersible Control Boxes1/2 to 7 1/2 HP • 5 to 85 GPM

Features:

• Universal voltage relay• Designed for outdoor

installations• Heavy-duty terminal block for

secure connections

• Side and bottom knockouts for easy wire installation

• Interchangeable with industry control boxes

®

2 Copyright © 2015 Flint & Walling

Commander Pro® VS Series 15, 20, and 30

Variable Speed Controllers and SystemsFEATURES:

• Easy to read diagnostic display

• Increases flow as demand increases

• Adjustable constant pressure

• Automatic pump and motor protection

• Superior cooling and dust protection

• Meets Part 15 Class A FCC electronic interference standards

• Programming lockout for secure operation

• Tamper proof cover• Automatic fan

designed to maximize cooling

• NEMA 3R for indoor/outdoor use

DESIGNED FOR THE PROFESSIONAL PUMP INSTALLER

6P SERIES 5 to 30 HP50, 80 and 120 GPM

6T & 8T SERIES 5 to 100 HP150, 200, 250, 325 and 400 GPM

6P6T

50 to 1000 GPM For 5, 6, 7 and 8 inch wells

• High capacity submersible pumps for commercial, industrial, agricultural, municipal and other deep well, large water volume applications

• Cast iron motor bracket and discharge adapter

• 416 Stainless steel or chrome plated pump shaft

• Bronze or Buna-N bushings

• Cast iron intermediate bowl with baked on porcelain lining

• Bronze or 304 stainless steel impeller balanced to reduce vibration

• 416 Stainless steel collet with split taper for tight lock

• Bronze sand collar to protect motor from sand

• Bronze thrust collar protects from upthrust

• 416 Stainless steel inlet screen allows water in while keeping objects out

• 416 Stainless steel motor coupling will not corrode

• Stainless steel cable guard protects motor lead

• Series “6P” High capacity six inch submersible pumps for commercial, industrial, agricultural, municipal and other deep well, large water volume applications

• Cast iron suction and discharge housings

• Stainless steel pump shaft and coupling

• Complete selection of Franklin stainless steel motors

FCC Part 15 Class A

Using a majority of Made in Americamaterials and components

Using a majority of Made in Americamaterials and components

®

Copyright © 2015 Flint & Walling 3

Series CJ101 3/4—3 HP Single or Three Phase

MULTI STAGE FOR HIGH HEADC US

UL Std. No. 778

• Flint & Walling’s 56-frame, NEMA J, capacitor start, double ball bearing motors for continuous operation.

• 3/4, 1, 1 1/2, 2 and 3 HP sizes with single or three phase options.

• Lead free, electronically balanced brass or thermoplastic impellers.

• Rugged cast iron pump casing. Multi stage for high head.

• Fast, easy service. Normal wearing parts are easily removed for service and replacement without disturbing the suction or discharge piping.

SINGLE STAGE FOR ECONOMY

• Flint & Walling’s 56-frame, NEMA J, capacitor start, double ball bearing motors for continuous operation.

• 1/3, 1/2, 3/4, 1, 1 1/2 and 2 HP sizes with single or three phase options.

• Lead-free, electronically balanced brass or thermoplastic impellers.

• Rugged volute type casting. Discharge can be rotated to any one of four positions for horizontal or vertical installation.

• Fast, easy service. Normal wearing parts are easily removed for service and replacement without disturbing the suction or discharge piping.

Series CJ103 1/3—2 HP Single or Three Phase

C USUL Std. No. 778

Series C220003—7 1/2 HP Single or Two Stage

• The C22000 series is a rugged pump built for extra performance.

• Nationally known NEMA JM motors. Nationwide service available from local authorized service stations.

• 3, 5 and 7 1/2 HP sizes with single or three phase options.

• Lead-free impellers are electronically balanced.

FOR EXTRA PERFORMANCE

Using a majority of Made in Americamaterials and components

Using a majority of Made in Americamaterials and components

Using a majority of Made in Americamaterials and components

C USUL Std. No. 778

®

4 Copyright © 2015 Flint & Walling

• Flint & Walling’s service plus 56-frame, NEMA J, dual voltage motors—single or three phase.

• Three-wire, 8 foot 115 volt grounded power cord and plug supplied on 1/3 HP single phase models. (Not supplied on any other model).

• Thermoplastic impellers and diffusers.

Cast Iron Model Pump Components— Cast Iron suction and discharge castings, 304 Stainless steel pump shell, 416 Stainless steel hex pump shaft and carbon/ceramic seal with Buna N rubber parts.

Powder Coated Model Pump Components—Powder coated cast iron suction and discharge castings, 304 Stainless steel pump shell, 416 Stainless steel hex pump shaft and carbon/ceramic seal with Buna N rubber parts.

Stainless Steel Model Pump Components—Stainless steel suction and discharge castings, 304 Stainless steel pump shell, 303 Stainless steel hex pump shaft and carbon/ceramic seal with Viton rubber parts.

Pressure Booster “PB” Series Pumps 1/3 - 3 HP

5, 7, 10, 19, 27, 35, 55 & 85 GPM

Applications: Pressure Cleaning, Spray or Mist Systems, Jockey Pumps, Booster Service,

Reverse Osmosis, Water Circulation and General Purpose Pumping.

PRESSURES TO 200 PSI— 140°F MAXIMUM LIQUID TEMPERATURE

C USUL Std. No. 778

3/4—3 HP Single or Three Phase SPJ Series 1 - 2 HP Single Phase SP Series

• Compare – when customers need high volume at high pressures, there is no better performer.

• Brass or plastic impeller options on selected models

• Large cast iron pump body to ensure rapid priming

• Designed for lawn and turf sprinkling, irrigation and water transfer

Series SPM, High Head Lawn Sprinkler 3 Hp And 5 Hp, Single Or Three Phase

Series SPJ and SP, Lawn Sprinkler 3/4 - 3 HP, Single Or Three Phase

C USUL Std. No. 778

• High capacity, high pressure

• Large cast iron pump body to ensure rapid priming

• JM frame industrial duty motor

• Self-adjusting mechanical seal is water lubricated for trouble-free, maintenance free operation

• Designed for lawn and turf sprinkling, irrigation and water transfer

• Cast iron impellers for long life

• 2” NPT Suction and discharge

• Built-in check valve facilitates priming and prevents backflow

Using a majority of Made in Americamaterials and components

Using a majority of Made in Americamaterials and components

®

Copyright © 2015 Flint & Walling 5

Horizontal Jet Pumps 1/3 - 1 1/2 HP

“CPJ”, “CPH”, “EK” and “FJ” Series

CPJ CONVERTIBLE CPH CONVERTIBLE

CPJS SHALLOW WELL EK & CPHS SHALLOW WELL

• The CPJ, CPH and EK models feature the famous Flint and Walling “Service Plus” motor, available in either NEMA J or Uni-frame flange construction. The F & W 56 frame, double ball bearing motor offers the ultimate in performance and dependability.

• Designed for years of trouble-free operation and simple, on-site servicing, the CPJ and CPH feature unique interchangeability of replacement parts to keep inventories at a minimum.

Service Plus Jet Pump Motors

Governor

Overload

Zinc CladFan

Zinc CladShell

Dynamically Balanced Rotor

Double SealedBall Bearings Access Cover

Switch

Capacitor

C USUL Std. No. 778

Using a majority of Made in Americamaterials and components

Using a majority of Made in Americamaterials and components

®

6 Copyright © 2015 Flint & Walling

Deep Well Jet Pumps3/4 - 2 HP • Single & Multi-Stage

Two Stage “VA” Series With Exclusive Totally Automatic Pressure Regulator

3/4 - 1 1/2 HP

Two Stage “VS” Series With Adjustable Diaphragm Pressure Regulator

3/4 - 1 1/2 HP

Single Stage “VPH” Series With Adjustable Diaphragm Pressure Regulator

1 HP

135276A Optional Pump Base

For Horizontal Mounting Of

“VA” and “VS” Series Jet Pumps

“VA” and “VS” Series Jet Pump

With Optional Shallow Well Ejector

Product Features

• Nema J single phase, 60 hz, 3450 RPM dual voltage motor, features: quality windings, double ball bearings and overload protection with automatic restart.

• Precision molded impeller and diffuser insures perfect alignment and ultra-smooth passages for high performance and reliability.

• Large one-piece pump case design, pump can be disassembled without disturbing well or discharge pipes.

• Top located priming port and discharge prevents air lock and allows for easy priming.

• Convenient tappings for draining of pump and installation of pressure switch and pressure gauge.

Using a majority of Made in Americamaterials and components

®

Copyright © 2015 Flint & Walling 7

• Multi-stage effluent submersible pumps are used in on-site applications that demand more head than a traditional single stage centrifugal submersible pump. This need is met by offering a complete line of submersible effluent turbine pumps.

• These pumps have been proven in field applications and have many years of development behind them.

Typical applications include mound systems, drip systems, and recirculation media filters. All units include cool running submersible motors that do not require external water flow to prevent overheating. Therefore, an outer pump sleeve is not required for models less than 2 HP.

• Pumps can be installed directly in a dose tank as long as an effluent filter is used on the septic tank outlet.

• These pumps can also be used in conjunction with a Filtered STEP system.

Multi-Stage Effluent 4 InchSubmersible Pumps

F5030 - F5035 Series

Premier Water ConditioningremierremierroductsroductsPPPP

WATER TREATMENT

®

Two Tank Metered Water Softener

• Custom metered valve regenerates based on actual water usage, saves water and salt by regenerating only when needed.

• Two tank design for easy maintenance and 250 lb. salt storage capacity.

• High capacity resin ensures maximum softening capability.

• Removes up to 3 PPM clear water iron.

• Automatic internal by-pass valve for constant household water flow even during regeneration cycles.

• Salt support platform allows for use of many types of salt.

• Safety brine overflow protection standard equipment.

• Turbulator “Rust purge” backwash system

• Three-year limited warranty on control valve and ten-year limited warranty on mineral tank. One-year limited warranty on other parts.

Effectively reduces: bad taste, odors, chlorine, organic chemicals, pesticides and herbicides. For use on private or municipal water systems.• Simple to install—

easily replaces standard cartridge filters.

• Mineral easily replaced, approximately every three years.

• 10 year warranty on NSF approved fiberglass tank.

• Wastes no water, uses no electricity.

• Compact size (7” W x 20” H) fits conveniently under standard kitchen sink.

• Improves the taste and odor of water and beverages.

• Reduces chemicals such as chlorine and municipal treatment chemical by-products.

CSM Series

TM06

Deluxe Undercounter Taste & Odor Filter

C USUL Std. No. 778

Using a majority of Made in Americamaterials and components

®

8 Copyright © 2015 Flint & Walling

Flint & Walling | 95 North Oak Street | Kendallville, IN 46755800-345-9422 | flintandwalling.com

Floating Pond / Aeration Pump Systems

Pump System Model FPS0501

• Designed for waterscapes, golf courses, retention ponds, parks and more.

• Available in 1/2, 3/4 and 1 HP, 230V, single phase models

• Operates in 5 ft. of water or deeper

• Easily interchangeable nozzles to achieve three different spray patterns

• Polyethylene, foam-filled floatation system: UV resistant, will not waterlog

• Stainless steel eye bolts anchor system to pond bottom or shore line with nylon rope

• Six inch diameter, slotted PVC screen provides large surface area to filter debris and draw water from below the pond surface area

• Four inch diameter pump fitted with stainless steel and thermal plastic components

• Water-cooled motor with stainless steel shell. Oil-free design. Single phase, 230V

• Rain-proof, lockable control center on FPS05021, FPS07021, FPS10021 models. Includes internally mounted ground fault interrupter and 24 hour adjustable

timers for pump and optional lights.

• Flint & Walling floating fountains are even more dramatic at night with the addition of a “Night Bright” lighting system. The three light, 120V, 105 Watt system includes powder coated, cast aluminum housings that can easily be installed onto the float. The fountain control center includes an adjustable 24 hour timer for controlling the “Night Bright” lighting system.

• 1/2 HP model available with 115V motor and no control center.

FEATURES AND BENEFITS

14.5"

32"

Pump System Models

FPS05021, FPS07021, FPS10021

Light Kit Model 023069

City Water Booster Pump

Before

After

• Very quiet - Smooth running to assure quiet operation whether installed indoors or outdoors

• Small compact design - Small footprint enable this system to be installed almost anywhere

• Easy to prime - Convenient priming plug allows for easy access to prime the pump.

• Robust inlet and outlet fitting - Powder coated metal flanges allow for secure piping upon installation.

• Built-in protection - Pump is protected against dry runs, dead heading or rapid cycling.

• Thermal sensor protection - Pump is protected against over heating due to running dry or dead heading.

• Easy on, easy off - Toggle switch is conveniently located to manually power pump on or off.

VP10 & VP05

C USNSF/ANSI 372

255405