+ All Categories
Home > Documents > 4X4 and SUV Driveshaft Catalogue Catalogue d‘arbre de · PDF file ·...

4X4 and SUV Driveshaft Catalogue Catalogue d‘arbre de · PDF file ·...

Date post: 25-Mar-2018
Category:
Upload: nguyenliem
View: 221 times
Download: 3 times
Share this document with a friend
29
4X4 and SUV Driveshaft Catalogue Catalogue d‘arbre de propulsion pour 4x4 et VUS
Transcript

4X4 and SUV Driveshaft Catalogue

Catalogue d‘arbre de propulsion pour 4x4 et VUS

For Illustrative Purposes OnlyMay Not Resemble Actual Parts

(TC to FA)Front propellor drive shaft from tranfer case for all 4x4 SUV’s, trucks. (In some models the shaft is mounted on the opposite side of the vehicle.)

34

(TC to RA)Rear propellor drive shaft from transmis-sion to rear axle for all 4x4 SUV’s, trucks.

4X4 and SUV DRIVEHSHAFT CATALOGUE

TABLE OF CONTENTS

AM General .............................................................................................................1

Cadillac ...................................................................................................................1

Chevrolet/GMC .................................................................................................... 1-6

Dodge/Plymouth............................................................................................... 6-10

Ford .................................................................................................................11-18

Geo .......................................................................................................................18

Honda ...................................................................................................................18

Isuzu .....................................................................................................................18

Jeep .................................................................................................................19-21

Landrover .............................................................................................................21

Lexus ....................................................................................................................21

Mazda ..............................................................................................................21-22

Mercedes-Benz .....................................................................................................22

Mercury ................................................................................................................22

Mitsubishi ........................................................................................................22-23

Nissan ...................................................................................................................23

Oldsmobile ...........................................................................................................23

Toyota ..............................................................................................................23-24

REMANUFACTURED DRIVE SHAFTS / PROP SHAFTS

Year Application Length Code OEM Type Part

AM GENERALHUMMER 2007-03 Front H2 23 3/4" W 15140566 A27 *94902005-03 Front H2 23 3/4" W 15066916 A27 *94912007-06 Front H3 23 5/8" W 10376298 A29 *9492

CADILLAC ESCALADE 2006-02 Front and EXT 27 1/4" W 26055995 A26 *93632006-02 Front ESV 27 1/4" W 26055995 A26 *93632004-00 Rear 4WD 40 1/4" B 15767176 A22 *93902000-99 Front w/4 Spd. AT (4L80) 33 1/2" B 26038128 A21 9362

Front w/4 Spd. Elect. AT (4L60E) 31 3/4" B 26038124 26057959 A21 9361

CHEVROLET/GMCAVALANCHE2006-03 Front 1500 w/active brake control 29 5/8" B 15711973 A25 *93912006-03 Front w/o active brake control 26 1/4" W 15182095 A25 *93922006-02 Front 2500 26 1/4" W 15182098 A28 *93942002 Front 26 1/4" W 15182095 A25 *9395ASTRO, SAFARI MINI VAN 2005-99 Front 26" W 15763590 15113831 A17F 91462003-99 Rear 35 1/4" B CBN,GY5 A22 *93961998-90 Front w/AWD 30 1/4" C 26035527 A10 9355BLAZER/JIMMY FULL SIZE 2000-97 Front w/4 Spd. AT (4L80) 33 1/2" B 26038128 A21 9362

Front w/4 Spd. Elect. AT (4L60E) 31 3/4" B26038124 26057959 A21 9361

Front w/5 Spd. MT 32 1/2" B 26057962 26038120 A21 93601996-95 Front w/4 Spd. AT (4L80) 33 1/2" B 26038128 A21 9362

Front w/4 Spd. Elect. AT (4L60E) 31 3/4" B 26038124 26057959 A21 9361

Front w/5 Spd. MT 32 1/2" B 26038120 26057962 A21 9360Rear 35" B 26020316 A22 9369

1994-92 Front Gas Eng. w/AT 28 1/2" B 26022466 A14 9346Front Diesel Eng. w/AT 6.5 Liter 29" B 26029958 A14 *9397Front Diesel Eng. w/AT 28 3/4" B 26029959 A13 9348Rear 35" B 26020316 A22 9369

1991-81 Front 29 1/2" B 7830927 26013911 A2 93391980-78 Front w/AT 27 1/4" B 7826670 A2 9337

Front w/MT 23 7/8" B 7834531 A2 93381977 Front w/AT (Flange at Transcase) 27 1/4" B 7826670 A2 9337

Front w/AT (Yoke at Transcase) 27 7/8" B 326479 A1 9333Front w/MT (Flange at Transcase) 23 7/8" B 7834531 A2 9338Front w/MT (Yoke at Transcase) 24 5/8" B 326487 A1 9334Front w/AT (Flange at Transcase) 27 1/4" B 7826670 A2 9337Front w/AT (Yoke at Transcase) 27 7/8" B 326479 A1 9333

CODES: B Centerline of U-Joint located at the slip yoke end to centerline of the rear (furthest U-Joint) on the opposite end of prop shaft. Prop shaft must be collapsed. C Face of flange to face of flange. Shaft must be collapsed. Some applications have a flange on one end only. Measure face of flange to centerline of rear U-Joint. W Tube length only. Measure centerline of weld to centerline of opposite weld. * New Number. Limited core supply may restrict availability. Type See pages ?????

1

REMANUFACTURED DRIVE SHAFTS / PROP SHAFTS

Year Application Length Code OEM Type Part

CHEVROLET (Cont'd)BLAZER/JIMMY FULL SIZE (Cont'd)1977 Front w/MT (Flange at Transcase) 23 7/8" B 7834531 A2 9338

Front w/MT (Yoke at Transcase) 24 5/8" B 326487 A1 93341976-73 Front w/AT 27 7/8" B 326479 A1 9333

Front w/MT 24 5/8" B 326487 A1 93341972-70 Front 26 3/32" B 3960827 A1 93211969 Front (Late Production) 26 3/32" B 3960827 A1 93211969 Front (Early Production) 23 1/4" B 3945080 A1 93201968-66 Front 23 1/4" B 3945080 A1 9320BLAZER S-10/JIMMY S-15 Down-Sized 2005-99 Front three switch dash NP1 29 1/2" C 26032451 A17 93592005-99 Front four switch dash NP8 26 3/4" W 15113797 A17 *93982004 Rear 4.3 Liter AOD 45 3/8" B 15036992 A22 *93992004-99 Rear 4WD 2DR AT 7.6 Liter 30 3/8" B 15038492 A22 *95012004-96 Rear 2DR MT 7.6 Liter 29 1/2" B 15038493 A22 *95022004-99 Rear 4WD Opt Code NP8 /Envoy code HJO 36 3/8" B 15036982 A22 *95152003-02 Rear [Steel Conv] w/208,241 Transcase Ext Cab 68 1/4" B 26010391 A22 *93712003-02 Front Solid Bar Shaft 19 1/4" W 15036981 A17SB *93321999-95 Front w/AWD 3.42 & 3.73 Axle or HD Tow Package Type N 25 1/4" B 26028429 A19 93641996-92 Rear w/208,241 Transcase 58 1/8" B CWA,CWM A22 *9370

Front w/4WD Exc. 3.42 & 3.73 Axle or HD Tow Package Type M 29 1/2" C 26032451 A17 93591994-92 Front 26" B 26006948 A12 9358

Rear 31" B 26024566 A22 93541991-83 Front 26" B 26006948 A12 9358COLORADO/CANYON2005-04 Front AWD Pick-up square flange on CV 22 1/4" W 15104642 A29 *9516ENVOY/TRAILBLAZER2005-02 Front 4.2 Liter and XL 19 1/4" W 15036981 A17 *93292005-03 Front 5.3 Liter XL and XUV 26 1/2" W 15152342 A17 *9330EQUINOX2005 Rear 36 1/8" W 22729203 *9517K SERIES 1/2 TON PICKUP (4WD)2000-97 Front w/4 Spd. AT (4L80) 33 1/2" B 26038128 A21 9362

Front w/4 Spd. Elect. AT (4L60E) 31 3/4" B 26038124 26057959 A21 9361

Front w/MT 32 1/2" B 26038120 26057962 A15 93601996-95 Front w/4 Spd. AT (4L80) 33 1/2" B 26038128 A21 9362

Front w/4 Spd. Elect. AT (4L60E) 31 3/4" B 26038124 26057959 A21 9361

Front w/MT 32 1/2" B 26038120 26057962 A15 9360Rear 35" B 26020316 A22 9369

1994 Front Gas Eng. w/AT 28 1/2" B 26022466 A14 9346Front Diesel Eng. w/AT 28 3/4" B 26029959 A13 9348Rear 35" B 26020316 A22 9369

CODES: B Centerline of U-Joint located at the slip yoke end to centerline of the rear (furthest U-Joint) on the opposite end of prop shaft. Prop shaft must be collapsed. C Face of flange to face of flange. Shaft must be collapsed. Some applications have a flange on one end only. Measure face of flange to centerline of rear U-Joint. W Tube length only. Measure centerline of weld to centerline of opposite weld. * New Number. Limited core supply may restrict availability. Type See pages ?????

2

REMANUFACTURED DRIVE SHAFTS / PROP SHAFTS

Year Application Length Code OEM Type Part

CHEVROLET (Cont'd)K SERIES 1/2 TON PICKUP (4WD) (Cont'd)1993-92 Front 28 1/2" B 26022466 A14 9346

Rear 35 1/4" B 26020316 A22 93691991-88 Front 28 1/2" B 26022466 A14 9346

1987-81 Front 29 1/2" B 7830297 26013911 A2 93391980-78 Front w/AT 27 1/2" B 7826670 A2 9337

Front w/MT 23 7/8" B 7835431 A2 93381977 Front w/AT (Flange at Transcase) 27 1/2" B 7826670 A2 9337

Front w/AT (Yoke at Transcase) 27 7/8" B 326479 A1 9333Front w/MT (Flange at Transcase) 23 7/8" B 7834531 A2 9338Front w/MT (Yoke at Transcase) 24 5/8" B 326487 A1 9334

1976-73 Front 250 Eng. w/MT 24 5/8" B 326487 A1 9334Front 350 Eng. w/AT 27 7/8" B 326479 A1 9333

1972-70 Front 26 3/32" B 3960827 A1 93211969 Front (Late Production) 26 3/32" B 3960287 A1 9321

Front (Early Production) 23 1/4" B 3945080 A1 93201968-66 Front 23 1/4" B 3945080 A1 9320K SERIES 3/4 TON PICKUP (4WD)2000-97 Front 7200 lb. GVW w/4 Spd. AT (4L80) 33 1/2" B 26038128 A21 9362

Front 7200 lb. GVW w/4 Spd. Elect. AT (4L60E) 31 3/4" B 26038124 26057959 A21 9361

Front 7200 lb. GVW w/MT 32 1/2" B 26038120 26057962 A15 9360

Front 8600 lb. GVW w/4 Spd. AT 31 3/4" B 26038124 26057959 A21 9361

Front 8600 lb. GVW w/MT 30 1/8" B 26038121 26057693 A21 93661996-95 Front 7200 lb. GVW w/4 Spd. AT (4L80) 33 1/2" B 26038128 A21 9362

Front 7200 lb. GVW w/4 Spd. Elect. AT (4L60E) 31 3/4" B 26038124 26057959 A21 9361

Front 7200 lb. GVW w/MT 32 1/2" B 26038120 26057962 A15 9360

Front 8600 lb. GVW w/4 Spd. AT 31 3/4" B 26038124 26057959 A21 9361

Front 8600 lb. GVW w/MT 30 1/8" B 26038121 26057963 A21 9366Rear 35 1/4" B 26024566 A22 9369

1994-92 Front 7200 lb. GVW Gas Eng. w/AT 28 1/2" B 26022466 A14 9346Front 7200 lb. GVW Diesel Eng. w/AT 28 3/4" B 26029959 A13 9348

Front 8600 lb. GVW (Exc. Saginaw Flange) 30" B 26038121 26057959 A15 9344Rear 35" B 26020316 A22 9369

1991-88 Front 7200 lb. GVW Gas Eng. w/AT 28 1/2" B 26022466 A14 9346Front 8600 lb. GVW (Exc. Saginaw Flange) 30" B 26057963 A15 9344

1987-81 Front 7200 lb. & 8600 lb. GVW 29 1/2" B 7830927 26013911 A2 93391980-78 Front 7200 lb. & 8600 lb. GVW w/AT 27 1/2" B 7826670 A2 9337

Front 7200 lb. & 8600 lb. GVW w/MT 23 7/8" B 7834531 A2 93381977 Front 7200 lb. & 8600 lb. GVW w/AT (Flange at Transcase) 27 1/2" B 7826670 A2 9337

Front 7200 lb. & 8600 lb. GVW w/AT (Yoke at Transcase) 27 7/8" B 326479 A1 9333Front 7200 lb. & 8600 lb. GVW w/MT (Flange at Transcase) 23 7/8" B 7836670 A2 9338

CODES: B Centerline of U-Joint located at the slip yoke end to centerline of the rear (furthest U-Joint) on the opposite end of prop shaft. Prop shaft must be collapsed. * New Number. Limited core supply may restrict availability.

Type See pages ?????

3

REMANUFACTURED DRIVE SHAFTS / PROP SHAFTS

Year Application Length Code OEM Type Part

CHEVROLET (Cont'd)K SERIES 3/4 TON PICKUP (4WD) (Cont'd)1977 Front 7200 lb. & 8600 lb. GVW w/MT (Yoke at Transcase) 24 5/8" B 326487 A1 93341976-73 Front 7200 lb. GVW 250 Eng. w/MT (P/T 4WD) 24 5/8" B 326487 A1 9334

Front 7200 lb. GVW 350 Eng. w/AT (F/T 4WD) 27 7/8" B 326479 A1 9333Front 8600 lb. GVW 250 Eng. w/MT 24 5/8" B 326487 A1 9334Front 8600 lb. GVW 350 Eng. w/AT 27 7/8" B 326479 A1 9333

1972-70 Front 8600 lb. GVW 26 3/32" B 3960827 A1 93211969 Front 8600 lb. GVW (Late Production) 26 3/32" B 3960827 A1 9321

Front 8600 lb. GVW (Early Production) 23 1/4" B 3945080 A1 93201968-66 Front 8600 lb. GVW 23 1/4" B 3945080 A1 9320K SERIES 1TON PICKUP (4WD) 2000-97 Front w/4 Spd. AT 31 3/4" B 26038124 26057959 A21 9361

Front w/5 Spd. MT 30 1/8" B 26038121 26057963 A21 9366

1996-95 Front w/4 Spd. AT 31 3/4" B 26038124 26057959 A21 9361

Front w/5 Spd. MT 30 1/8" B 26038121 26057963 A21 9366Rear 35" B 26020316 A22 9369

1994-92 Front w/4 Spd. AT 28 1/2" B 26022466 A14 9346Front w/5 Spd. MT 26 1/2" B 26022467 A13 9347Rear 35" B 26020316 A22 9369

1991 Front w/4 Spd. AT 4 Door Crew Cab V-30 26 1/8" B 7834532 A2 9351Front 4 Door Crew Cab V-30 MT (Exc. 4 Spd.) 22 3/4" B 912170S A2 9353Front Exc. 4 Door Crew Cab V-30 26 1/2" B 26022467 A13 9347

1990-88 Front 4 Door Crew Cab V-30 22 3/4" B 912170S A2 9353Front Exc. 4 Door Crew Cab V-30 26 1/2" B 26022467 A13 9347

1987 Front 22 3/4" B 912170S A2 93531986-80 Front w/AT 26 1/8" B 7834532 A2 9351

Front w/MT 22 3/4" B 912170S A2 93531979-77 Front w/AT 29" B 375205 A1 9336

Front w/MT 23 5/32" B A1 9331SILVERADO/SIERRA (4WD)2007-01 Front 6.0 Liter 3500 AT 26 1/16" W 15182098 A28 *95182007-01 Front 24 7/8" W 15186002 A25 *95192007-01 Front 6 Speed MT 27 1/8" W 15182094 A26 *95202007-01 Front 5 Speed AT 30 3/4" B 15024434 A26 *95212007-01 Front 26 1/8" W 15182095 A25 *95222007-99 Front Code GMT 800 24 1/4" W 15182096 A25 *95232006-02 Front 3500 AT 4spd opt MT1 26 1/8" W 15090195 A28 *95242004-02 Front 1500 Pick-up Exc.Crew Cab or SS w/active brake control 26" W 15182095 A25 *95252002 Front 24 1/4" W 15182097 A25 *95262003-02 Front 1500 Pick-up Exc. Crew Cab 27 1/4" W 26055995 A26 *93632000-99 Rear Code DPB Swedged 54 1/2" B 1567176 A22 *95272003-01 Rear Code GFL Steel 61" B 15024402 A22 *95282005-99 Rear Code KW1 Swedged 43 1/4" B 15163798 A22 *95292003-01 Rear [Steel Conv] w/208,241 TC 68 1/4" B 909652600 A22 *93712001 Front 1500 Pick-up Crew Cab 26 1/4" W 26064059 A25 9306

Front 1500 Pick-up Exc.Crew Cab 31 1/2" B 26099555 A26 9307

CODES: B Centerline of U-Joint located at the slip yoke end to centerline of the rear (furthest U-Joint) on the opposite end of prop shaft. Prop shaft must be collapsed. W Tube length only. Measure centerline of weld to centerline of opposite weld. * New Number. Limited core supply may restrict availability. Type See pages ?????

4

REMANUFACTURED DRIVE SHAFTS / PROP SHAFTS

Year Application Length Code OEM Type Part

CHEVROLET (Cont'd)SILVERADO/SIERRA (4WD) (Cont'd)2001 Front 2500 & 3500 Pick-up w/AT 26 1/8" W 26064059 A25 9306

Front 2500 & 3500 Pick-up w/5 Spd. MT 26" W 15090192 A25 9309Front 2500 & 3500 Pick-up w/6 Spd. MT 26 1/8" W 15090195 A25 9308

2000-99 Front 1500 Pick-up 31 1/8" B 26099555 A26 9307Front 2500 Pick-up w/AT 15719954 9310

SUBURBAN (K-15,K-25,K-1500) (4WD)2006-03 Front 1500 w/active brake control JL4 27 1/4" W 26055995 A26 *93632006-03 Front w/out active brake control JL4 26 1/4" W 15182095 A26 *95302002-00 Front 31 1/2" B 26099555 A26 93072004-02 Rear 54 1/4" B 15713680 A22 *95311999-97 Front w/4 Spd. AT (4L80) 33 1/2" B 26038128 A21 9362

Front w/4 Spd. Elect. AT (4L60E) 31 3/4" B 26038124 26057959 A21 9361

Front w/MT 32 1/2" B 26038120 26057962 A21 93601996-95 Front w/4 Spd. AT (4L80) 33 1/2" B 26038128 A21 9362

Front w/4 Spd. Elect. AT (4L60E) 31 3/4" B 26038124 26057959 A21 93611996-92 Rear w/208 Transcase 58 1/8" B CWA,CWM A22 *9370

Rear w/ 241 Transcase 58 1/8" B CWA,CWM A22 *9370

1996-95 Front w/MT 32 1/2" B 26038120 26057962 A15 9360Rear 35" B 26024566 A22 9369

1994 Front Gas Eng. w/AT 28 1/2" B 26022466 A14 9346Front Diesel Eng. w/AT 28 3/4" B 26029959 A13 9348Rear 35" B 26020316 A22 9369

1993-92 Front 28 1/2" B 26022466 A14 9346Rear 35" B 26020316 A22 9369

1991 Front w/4 Spd AT 29 1/2" B 7830927 26013911 A14 9349

Front w/MT (Exc.4 Spd.) 29 1/2" B 7830927 26013911 A2 9339

1990-81 Front 29 1/2" B 7830927 26013911 A2 9339SUBURBAN (K-2500) (4WD)2006-02 Front 26 1/8" W 15182098 A28 *95182001 Front 26 1/8" W 15182095 A25 93062000 Front 15719954 9310SUNRUNNER (4WD) 1999 Front w/AT A23 9287

Front w/MT A23 92861998-96 Front 4 Door w/AT A23 9471

Front 4 Door w/MT A23 9470Front 2 Door A23 9470

1995-92 Front A23 9470SYCLONE/TYPHOON 1993-92 Front 25 1/4" C A11 9357

CODES: B Centerline of U-Joint located at the slip yoke end to centerline of the rear (furthest U-Joint) on the opposite end of prop shaft. Prop shaft must be collapsed. C Face of flange to face of flange. Shaft must be collapsed. Some applications have a flange on one end only. Measure face of flange to centerline of rear U-Joint. W Tube length only. Measure centerline of weld to centerline of opposite weld. * New Number. Limited core supply may restrict availability. Type See pages ?????

5

REMANUFACTURED DRIVE SHAFTS / PROP SHAFTS

Year Application Length Code OEM Type Part

CHEVROLET (Cont'd)TAHOE/YUKON (4WD) 2006-03 Front w/active brake control [opt JL4] 27 1/4" W 26055995 A25 *93632006-02 Front Denali exc Denali w/ active brake control JL4 27 1/4" W 26055995 A25 *93632006-02 Front XL 2500 26 1/8" W 15182098 A28 *95182004-02 Front 26" W 15090195 A25 *95322001 Front 33 1/2" B 26099555 A26 93072000-97 Front w/4 Spd. AT (4L80) (Exc.2000 YUKON DENALI) 33 1/2" B 26038128 A21 9362

Front w/4 Spd. Elect. AT (4L60E) 31 3/4" B 26038124 26057959 A21 9361

Front w/5 Spd. MT 32 1/2" B 26038120 26057962 A15 93601996-95 Front w/4 Spd. AT (4L80) 33 1/2" B 26038128 A21 9362

Front w/4 Spd. Elect. AT (4L60E) 31 3/4" B 26038124 26057959 A21 9361

Front w/5 Spd. MT 32 1/2" B 26038120 26057962 A15 9360Rear 35" B 260203316 A22 9369

1994 Front Gas Eng. w/AT 28 1/2" B 26022466 A14 9346Front Diesel Eng. w/AT 28 3/4" B 26029959 A13 9348

Rear 35" B 26020316 26050348 A22 9369YUKON DENALI 2000 Front (4L60E) 27 1/4" W 26055995 A26 9343YUKON XL 1500 2001-00 Front 32 1/2" B 26099555 A26 9307YUKON XL 2500 2001 Front 26 1/8" W 15182095 A25 93062000 Front 26" W 1579954 A26 9310

DODGE/PLYMOUTH DAKOTA 2005 Front 3.7L AT 26 1/4" C 52105982AC A33 9151

Front 3.7L MT 24 1/4" C 52105981AC A33 95142004 Front 3.7 L, 4.7L AT 26 1/4" C 52105982AC A33 9151

Front 3.7L, 4.7L MT 24 1/4" C 52105981AC A33 95142003-01 Front w/AT 26 1/4" C 52105982AC A33 9151

Front w/MT 24 1/4" C 52105981AC A33 95142000-99 Front w/AT 24 1/4" B 52099204AB A5 9150

Front w/MT 26 1/4" C 52105982AC A33 95131998-97 Front w/AT 26 1/4" B 52099204 A1 9484

Front w/MT 23 7/8" B 52099203 A1 94831996 Front w/NV231 Transcase, A630 & Aisinseiki Trans. 25" B 53005551 A1 97001995-94 Front w/NV231 Transcase, 42RE & 46RE AT 27" B 52099321 A1 9701

Front w/NV231 Transcase, A630 & Aisinseiki MT 25" B 53005551 A1 9700Front w/NV231 Transcase, A500 & A518 AT 31 7/16" B 53005548 A1 9717

1993-87 Front w/MT 25" B 53005551 A1 9700Front w/AT 31 7/16" B 53005548 A1 9717

CODES: B Centerline of U-Joint located at the slip yoke end to centerline of the rear (furthest U-Joint) on the opposite end of prop shaft. Prop shaft must be collapsed. C Face of flange to face of flange. Shaft must be collapsed. Some applications have a flange on one end only. Measure face of flange to centerline of rear U-Joint. W Tube length only. Measure centerline of weld to centerline of opposite weld. * New Number. Limited core supply may restrict availability. Type See pages ?????

6

REMANUFACTURED DRIVE SHAFTS / PROP SHAFTS

Year Application Length Code OEM Type Part

DODGE/PLYMOUTH (Cont'd)DURANGO 2006-05 Front w/144Transcase 16" W 52853038AC A34 *91952005-04 Front w/244 Transcase 19 1/2" W 52853019AC A34 *91962003-01 Front 26 1/4" C 52105982AC A33 91512000 Front 24 1/4" B 52099204AB A5 91501999-98 Front 26 1/8" B 26099555 A1 97072000-98 Rear 45 1/4" B A22 9708RAM 1500 2004-02 Front 1500 MT 18 7/8" W 52105993AB A34 *9197

Front 1500 AT 19 1/2" W 52105990AB A34 *9198

2002-99Front w/138" & 154" WB 5.2 & 5.9 L Eng. 46RE AT Mdl. 44 Front Axle NV 231 HD Transcase, Club Cab 28 9/16" B 52105860AA A4 9101Front w/138" & 154" WB 5.2L Eng. A630 MT Mdl. 44 Front Axle NV 231 HD Transcase, Club Cab 27 9/16" B 52105871AA A4 9102

2002-99Front w/118" & 134" WB 5.2 & 5.9L Eng. 46RE AT Mdl. 44 Front Axle NV 231 HD Transcase, Conven. Cab 28 9/16" B 52105860AA A4 9101Front w/118" & 134" WB 5.2L Eng. A630 MT Mdl. 44 Front Axle NV 231 HD Transcase, Conven. Cab 27 9/16" B 52105871AA A4 9102

1998-96 Front w/46RE AT-3 5/8" U Joint 1 1/8" Brg. Cap-Inside Lock 20" W 52105871AC A4 9870Front w/46RH, 231 HD Transcase AT-3 5/8" U Joint- 1 1/8" Brg. Cap-Inside Lock 27 1/2" B 52105871AB A4 9814Front w/47RE, 241 LD Transcase. AT-3 5/8" U Joint- 1 1/8" Brg. Cap-Inside Lock 15 1/2" W 52105860AC A4 9871Front w/ MT-3 5/8" U Joint-1 1/8" Brg. Cap-Inside Lock 33 1/2" B A2 9812

1995-94 Front w/46RE AT-3 5/8" U Joint-1 1/8" Brg. Cap Inside Lock 20" W 52105871AC A4 9870Front w/46RH, 231 HD Transcase. AT 3 5/8" U Joint-1 1/8" Brg. Cap-Inside Lock 14 1/2" W 52105871AB A4 9814ALL 47RE w/241 LD Transcase. AT-3 5/8" U Joint-1 1/8" Brg. Cap Inside Lock 15 1/2" W 52105860AC A4 9871ALL MT-3 5/8" U Joint- 1 1/8" Brg. Cap Inside Lock 33 1/2" B A2 9812

RAM 2500 2006 Front Hemi 5.7L AT AAM SHAFT 13 1/2" W 52123110-- A32SF *9533

Front Diesel or Hemi MT AAM SHAFT 16 1/2" W 52123111-- A32SF *9534Front Diesel AT AAM SHAFT 14 1/2" W 52123112-- A32SF *9535

2005-03 Front 5.7L Hemi AT AAM SHAFT 13 1/2" W 52105930-- A32SF *9536Front 5.7L Hemi MT AAM SHAFT 12 3/4" W 52105931-- A32SF *9537Front ETO diesel MT AAM SHAFT 19" W 52105932-- A32SF *9538Front 6spd Diesel MT AAM SHAFT 16 1/2" W 52853143-- A32SF *9539Front Diesel AT AAM SHAFT 14 1/2" W 52105934-- A32SF *9540Front DVB Trans 5spd AT AAM SHAFT 13 1/4" W 52105933-- A32SF *9541

2002-00Front w/134" 138" & 154" WB 5.9L Eng. 46RE AT Mdl. 60 Front Axle NV241 HD Transcase. Club & Conven. Cab 27 9/16" B 52105871AB A4 9107

Front w/134" 138" & 154" WB 8.0L Eng. 47RE AT Mdl. 60 Front Axle NV241 HD Transcase. Club & Conven. Cab 29 1/8" B 52105862AB A4 9106

Front w/134" 138 & 154" WB 5.9L Turbo Diesel Eng. 47RE AT Mdl. 60 Front Axle NV241 HD Transcase. Club & Conven. Cab 29 1/8" B 52105862AB A4 9106

Front w/134" & 154" WB 5.9L Turbo Diesel Eng. A636 MT Mdl. 60 Front Axle NV241 HD Transcase. Club & Conven. Cab 27 9/16" B 52105871AB A4 9107

CODES: B Centerline of U-Joint located at the slip yoke end to centerline of the rear (furthest U-Joint) on the opposite end of prop shaft. Prop shaft must be collapsed. C Face of flange to face of flange. Shaft must be collapsed. Some applications have a flange on one end only. Measure face of flange to centerline of rear U-Joint. W Tube length only. Measure centerline of weld to centerline of opposite weld. * New Number. Limited core supply may restrict availability. Type See pages ?????

7

REMANUFACTURED DRIVE SHAFTS / PROP SHAFTS

Year Application Length Code OEM Type Part

DODGE/PLYMOUTH (Cont'd)RAM 2500 1999

Front w/134" WB 5.2 & 5.9L Eng. 46RE AT Mdl. 44 Front Axle NV241 Transcase. Conven. Cab 28 9/16" B 52105860AA A4 9101Front w/134" WB 5.2 & 5.9L Eng. 46RE AT Mdl. 60 Front Axle NV241 Transcase. Conven. Cab 27 9/16" B 52105871AA A4 9102

Front w/134" & 138" WB 5.9L Eng. 46RE AT Mdl. 60 Front Axle NV241 HD Transcase. Conven. & Club Cab 27 9/16" B 53105871AA A4 9102Front w/134" WB 8.0L Eng. 47RE AT Mdl. 60 Front Axle NV241 Transcase. Conven. Cab 28 9/16" B 52105869AA A4 9101Front w/134" WB 5.9L Turbo Diesel Eng. 47RE AT Mdl. 60 Front Axle NV241 Transcase. Conven. Cab 28 9/16" B 52105869AA A4 9101Front w/134" WB 8.0L Eng. 47RE AT Mdl. 60 Front Axle NV241 HD Transcase. Conven. Cab 29 1/8" B 52105862AA A4 9103Front w/134" WB 5.9L Turbo Diesel Eng. 47RE AT Mdl. 60 Front Axle NV241 HD Transcase. Conven. Cab 29 1/8" B 52105862AA A4 9103Front w/154" WB 8.0 & 5.9L Turbo Diesel Eng. 47RE AT Mdl. 60 Front Axle NV241 HD Transcase. Club Cab 29 1/8" B 52105862AA A4 9103Front w/134" WB 8.0 & 5.9L Turbo Diesel Eng. A636 MT Mdl. 60 Front Axle NV241 Transcase. Conven. Cab 27 9/16" B 52105871AA A4 9102Front w/154" WB 8.0 & 5.9L Turbo Diesel Eng. A636 MT Mdl. 60 Front Axle NV241 HD Transcase. Club Cab 27 9/16" B 52105871AA A4 9102Front w/134" WB 8.0L Eng. A636 MT Mdl. 60 Front Axle NV241 HD Transcase. Conven. Cab 29 1/8" B 52105862AA A4 9103Front w/134" WB 8.0L Eng. A636 MT Mdl. 60 Front Axle NV241 HD Transcase. Conven. Cab 27 9/16" B 52105871AA A4 9102Front w/134" WB 5.9L Turbo Diesel Eng. A636 MT Mdl. 60 Front Axle NV241 HD Transcase. Conven. Cab 27 9/16" B 52105871AA A4 9102Front w/134" WB 5.2 & 5.9L Eng. NV4500 MT Mdl. 60 Front Axle NV241 Transcase. Conven. Cab 27 1/8" B 52105840AA A4 9104

Front w/134" & 154" WB 5.9L Eng. NV4500 MT Mdl. 60 Front Axle NV241 HD Transcase. Conven. & Club Cab 27 1/8" B 52105840AA A4 9104Front w/134" WB 5.2 & 5.9L Eng. NV 4500 MT Mdl. 44 Front Axle NV241 Transcase. Conven. Cab 27 9/16" B 52105871AA A4 9102Front w/134" WB 5.9L Turbo Diesel Eng. NV5600 MT Mdl. 60 Front Axle NV241 Transcase Conven. Cab 32 13/16" B 52105866AA A4 9105

Front w/134" & 154" WB 5.9L Turbo Diesel Eng. NV5600 MT Mdl. 60 Front Axle NV241 HD Transcase Conven. & Club Cab 32 13/16" B 52105866AA A4 9105

1997-96 Front w/46RH AT 3 5/8" U joint-1 1/18 Brg. Cap Inside Lock 20" W 52105871AC A4 9870Front w/47RE, 241 LD Transcase. AT 15 1/2" W 52105860AC A4 9871Front w/47RE, 241 HD Transcase. AT 33 1/2" B 52093358 A2 9813Front w/ MT 14 1/2" W 52105871AA A4 9873

1995-94 Front w/46RH AT 20" W 52092513 A4 9872Front w/47RH, 241 LD Transcase. AT 14 1/2" W 52105871AB A4 9814Front w/47RH, 241 HD Transcase. AT 15 1/2" W 52106872AA A4 9874Front w/MT 14 1/2" W 52105871AA A4 9873

CODES: B Centerline of U-Joint located at the slip yoke end to centerline of the rear (furthest U-Joint) on the opposite end of prop shaft. Prop shaft must be collapsed. W Tube length only. Measure centerline of weld to centerline of opposite weld. * New Number. Limited core supply may restrict availability. Type See pages ?????

8

REMANUFACTURED DRIVE SHAFTS / PROP SHAFTS

Year Application Length Code OEM Type Part

DODGE/PLYMOUTH (Cont'd)RAM 3500 2006 Front Hemi 5.7L AT AAM SHAFT 13 1/2" W 52123110-- A32SF *9533

Front Diesel or Hemi MT AAM SHAFT 16 1/2" W 52123111-- A32SF *9534Front Diesel AT AAM SHAFT 14 1/2" W 52123112-- A32SF *9535

2005-03 Front 5.7L Hemi AT AAM SHAFT 13 1/2" W 52105930-- A32SF *9536Front 5.7L Hemi MT AAM SHAFT 12 3/4" W 52105931-- A32SF *9537Front ETO diesel MT AAM SHAFT 19" W 52105932-- A32SF *9538Front 6spd Diesel MT AAM SHAFT 16 1/2" W 52853143-- A32SF *9539Front Diesel AT AAM SHAFT 14 1/2" W 52105934-- A32SF *9540Front DVB Trans 5spd AT AAM SHAFT 13 1/4" W 52105933-- A32SF *9541

2002-00Front w/138" 154" & 162" WB 5.9L & 8.0L Eng. 46RE AT Mdl. 60 Front Axle NV241 HD Transcase. Club & Conven. Cab 27 9/16" B 52105871AA A4 9107

Front w/138" 154" & 162" WB 8.0L & 5.9L Turbo Diesel Eng. 47RE AT Mdl. 60 Front Axle NV241 HD Transcase. Club & Conven. Cab 29 1/8" B 52105871AB A4 9106

Front w/138" 154" & 162" WB 8.0L & 5.9L Turbo Diesel Eng. A636 MT Mdl. 60 Front Axle NV241 HD Transcase. Club & Conven. Cab 27 9/16" B 52105871AA A4 9107Front w/134" 138" 154" &162" WB 5.9L Eng. NV4500 MT Mdl. 60 Front Axle NV241 HD Transcase. Club & Conven. Cab 27 1/8" B 52105840AB A4 9109

1999Front w/138" 154" & 162" WB 5.9L Turbo Diesel Eng. NV5600 MT Mdl. 60 Frt Axle NV241 HD Transcase. Club & Conven. Cab 32 13/16" B 52105866AB A4 9108Front w/138" & 162" WB 5.9L Eng. 46RE AT Mdl. 60 Front Axle NV241 HD Transcase. Conven. Cab 27 9/16" B 52105871AA A4 9102Front w/134" 138" 154" & 162" WB 8.0L Eng. & 5.9L Turbo Diesel Eng. 47RE AT Mdl. 60 Front Axle NV241 HD Transcase. Club & Conven. Cab 29 1/8" B 52105862AA A4 9103Front w/138" & 162" WB 5.9L Turbo Diesel Eng. A636 MT Mdl. 60 Front Axle NV241 HD Transcase. Conven. Cab 29 1/8" B 52105862AA A4 9103Front w/138" & 162" WB 5.9L Eng. NV4500 MT Mdl. 60 Front Axle NV241 HD Transcase. Conven. Cab 27 1/8" B 52105840AA A4 9104Front w/138" & 162" WB 5.9L Turbo Diesel Eng. NV5600 MT Mdl. 60 Front Axle NV241 HD Transcase. Conven. Cab 32 13/16" B 52105866AA A4 9105Front w/138" WB 5.9L Eng. 46RE AT Mdl. 60 Front Axle NV241 HD Transcase. Club Cab 27 9/16" B 52105871AA A4 9102Front w/154" WB 8.0L & 5.9L Turbo Deisel Eng. A636 MT Mdl. 60 Front Axle NV241 & NV241 HD Transcase. Club Cab 27 9/16" B 52105871AA A4 9102Front w/138" & 154" WB 5.9L Eng. NV4500 MT Mdl. 60 Front Axle NV241 & NV241 HD Transcase. Club Cab 27 1/8" B 52105840AA A4 9104Front w/154" WB 5.9L Turbo Diesel Eng. NV5600 MT Mdl. 60 Front Axle NV 241 HD Transcase. Club Cab 32 13/16" B 52105866AA A4 9105

1997-96 Front w/46RH AT 3 5/8" U Joint-1 1/8" Brg. Cap- Inside Lock 20" W 52105871AC A4 9870Front w/47RE, 241 HD Transcase. AT 3 1/4" U joint - 1 1/16" Brg. Cap- Inside Lock 33 1/2" B A2 9813Front w/ MT 3 5/8" U Joint-1 1/8" Brg. Cap- Inside Lock 14 1/2" W 52105871AA A4 9873

1995-94 Front w/46RH AT 3 5/8" U Joint-1 1/8" Brg. Cap- Inside Lock 20" W A4 9872Front w/47RH, 241 HD Transcase. AT3 5/8 U Joint- 1 1/8" Brg. Cap- Inside Lock 15 1/2" W 52106872AA A4 9874Front w/ MT 14 1/2" B 52106872AA A4 9873

CODES: B Centerline of U-Joint located at the slip yoke end to centerline of the rear (furthest U-Joint) on the opposite end of prop shaft. Prop shaft must be collapsed. W Tube length only. Measure centerline of weld to centerline of opposite weld. * New Number. Limited core supply may restrict availability. Type See pages ?????

9

REMANUFACTURED DRIVE SHAFTS / PROP SHAFTS

Year Application Length Code OEM Type Part

DODGE/PLYMOUTH (Cont'd)RAMCHARGER/TRAILDUSTER 1993-90 Front w/AT 3 5/8" U Joint- 1/ 18" Brg. Cap-Inside Lock 19" W 52106872AC A2 9875

Front w/MT 27 1/2" B 3898646 A2 97101989-76 Front 27 1/2" B 3898646 A2 97101975 Front Late 75 w/Flange at Transcase. 27 1/2" B 3898646 A2 9710

Front Early 75 w/Yoke at Transcase. 27 7/8" B 326479 A1 93331974 Front 27 7/8" B 326479 A1 93331/2 Ton W-100, W-150 TRUCK 1993-90 Front w/3 Spd. AT 27 1/2" B 3898646 A2 9710

Front w/4 Spd. Over Drive AT 3 5/8" U Joint- 1 1/8" Brg. Cap-Inside Lock 19" W 62106872AC A2 9875Front w/MT 27 1/2" B 3898646 A2 9710

1989-76 Front 27 1/2" B 3898646 A2 97103/4 Ton W-200, W-250 TRUCK STANDARD DUTY W/3500 LB. AXLE DANA 441993-90 Front w/3 Spd. AT 27 1/2" B 3898646 A2 9710

Front w/4 Spd. Over Drive AT 3 5/8" U Joint- 1 1/8" Brg. Cap-Inside Lock 19" W 62106872AC A2 9875Front w/MT 27 1/2" B 3898646 A2 9710

1989-76 Front 27 1/2" B 3898646 A2 97101975 Front w/Flange at Transcase. 27 1/2" B 3898646 A2 9710

Front w/Yoke at Transcase. 27 7/8" B 326479 A2 93333/4 Ton W-200, W-250 TRUCK HD W/4500 LB. AXLE DANA 44 1993-90 Front w/3 Spd. AT 24 3/4" B 4164693 A2 9318

Front w/4 Spd. Over Drive AT 30 1/4" B 913971 A2 9711Front w/MT DANA 44 Transcase 3 1/4 U Joint 1 1/16" Brg. Cap 24 3/4" B 4164693 A2 9318Front w/MT DANA 60 HD Transcase 3 5/8" U Joint 1 1/8 Brg.Cap 24 3/4" B 52094016 A2 *9327

1989-87 Front 24 3/4" B 4164693 A2 93181986-76 Front w/F/T 4WD 26 1/4" B 3898647 A2 9319

Front w/P/T 4WD 24 3/4" B 4164693 A2 93181975 Front w/F/T 4WD w/Flange at Transcase. 26 1/4" B 3898647 A2 9319

Front w/P/T 4WD w/Flange at Transcase. 24 3/4" B 4164693 A2 9318Front w/Yoke at Transcase. 27 7/8" B 326479 A1 9333

1 Ton W-300, W-350 TRUCK 1993-90 Front w/3 Spd. AT 24 3/4" B 4164693 A2 9318

Front w/4 Spd. Over Drive AT 30 1/4" B 913971 A2 9711Front w/MT 24 3/4" B 4164693 A2 9318

1989-82 Front w/3500lb. Axle Dana 44 27 1/2" B 3898646 A2 9710Front w/F/T 4WD w/4500lb. Axle Dana 44 26 1/4" B 3898647 A2 9319Front w/P/T 4WD w/4500lb. Axle Dana 44 24 3/4" B 4164693 A2 9318

1981-76 Front w/F/T 4WD 26 1/4" B 3898647 A2 9319Front w/P/T 4WD 24 3/4" B 4164693 A2 9318

1975 Front 27 7/8" B 326479 A1 9333

CODES: B Centerline of U-Joint located at the slip yoke end to centerline of the rear (furthest U-Joint) on the opposite end of prop shaft. Prop shaft must be collapsed. W Tube length only. Measure centerline of weld to centerline of opposite weld. * New Number. Limited core supply may restrict availability. Type See pages ?????

10

REMANUFACTURED DRIVE SHAFTS / PROP SHAFTS

Year Application Length Code OEM Type Part

FORD AEROSTAR 1996-91 Front AWD w/4.0L. Type A4LD AT 31 15/16" B

FO9A4A376DA ,B,C,D,E A25 9618

BRONCO 1996-94 Front w/E40D AT 39 1/2" B F6TW4A376RA A15 9444

Front w/4R70W AT 35 1/4" B F376A3525CA A15 9459Front w/5 Spd. MT 37 1/2" B F6TWA376PA A15 9443

Rear w/E40D 4.9L.(1990-92), 5.0 & 5.8L. 3.08 & 3.55 Axle Ratio AT 23 3/8" BF0TA4602ZA F1TZ4602-2 A4A 9660

Rear w/5.0L. AOT 3.55 or 4.10 Axle Ratios AT 28 5/16" B E9TA4602PBE A4A 9664Rear w/5 Spd. Over Drive 4.9L.(1990-92) & 5.0L. 3.08, 3.55 or 4.10 Axle Ratio MT 25 7/8" B

E9TA4602NB E9TZ4602AC A4A 9663

Rear w/C6 AT or Borg Warner T-18 MT 4 Spd. Wide Ratio 4.9 L.(1990-92) & 5.0L. 3.08 or 3.55 Axle Ratio 29 5/16" B

E9TA4602MB E9TZ4602AB A4A 9665

1993-91 Front w/E40D AT 39 1/2" B F6TWA376PA A15 9444Front w/AOT AT 33 1/4" B E8TW4A376BCA A15 9441Front w/5 Spd. MT 37 1/2" B F6TWA376PA A15 9443

Rear w/E40D 4.9L.(1990-92), 5.0 & 5.8L. 3.08 & 3.55 Axle Ratio AT 23 3/8" BFOTA4602ZA FITZ4602-2 A4A 9660

Rear w/5.0L. AOT 3.55 or 4.10 Axle Ratios AT 28 5/16" BE9TA4602PB E9TZ4602AD A4A 9664

Rear w/5 Spd. Over Drive 4.9L.(1990-92) & 5.0L. 3.08, 3.55 or 4.10 Axle Ratio MT 25 7/8" B

E9TA4602NB E9TZ4602AC A4A 9663

Rear w/C6 AT or Borg Warner T-18 MT 4 Spd. Wide Ratio, 4.9L.(1990-92) & 5.0L. 3.08 or 3.55 Axle Ratio 29 5/16" B

E9TA4602MB E9TZ4602AB A4A 9665

1990 Front w/AOT AT 34 1/4" B E8TW4A376CA A15 9441Front w/E40D, 6-300(4.9L) and C6 AT 39 1/2" B E8TW4A376BA A20 9442Front w/E40D, 8-302(5.0L) AT 39 1/2" B F6TWA376PA A15 9444Front w/E40D, 8-351W(5.8L) AT 39 1/2" B E8TW4A376BA A20 9442Rear w/ 94" WB 30 1/4" B F376B3025C A9A 9458Front w/4 Spd. 105" WB MT 39 1/2" B E8TW4A376BA A20 9442Front w/5 Spd. 105" WB MT 37 1/2" B F6TWA376PA A15 9443

Rear w/E40D 4.9L.(1990-92), 5.0 & 5.8L. 3.08 & 3.55 Axle Ratio AT 23 3/8" BF0TA4602ZA F1TZ4602-2 A4A 9660

Rear w/5.0L. AOT 3.55 or 4.10 Axle Ratios AT 28 5/16" BE9TA4602PB E9TZ4602AD A4A 9664

Rear w/5 Spd. Over Drive 4.9L.(1990-92) & 5.0L. 3.08, 3.55 or 4.10 Axle Ratio MT 25 7/8" B

E9TA4602NB E9TZ4602AC A4A 9663

Rear w/C6 AT or Borg Warner T-18 MT 4 Spd. Wide Ratio, 4.9L.(1990-92) & 5.0L. 3.08 or 3.55 Axle Ratio 29 5/16" B

E9TA4602MB E9TZ4602AB A4A 9665

1989-88 Front w/AOD AT 34 1/4" B E8TW4A376CA A15 9441Front w/C6 AT 39 1/2" B E8TW4A376BA A20 9442Rear w/ 94" WB 30 1/4" B F3763025C A9A 9458Front w/4 Spd. 105" WB MT 39 1/2" B E8TW4A376BA A20 9442Front w/5 Spd. 105" WB MT 37 1/2" B F6TWA376PA A15 9443Rear w/C6 4.9 & 5.8L. EFI 3.08 & 3.55 Axle Ratio AT 29 5/8" B E7TA4602SA A20 9431Rear w/5.0 L. EFI AOT AT 28 5/8" B 9126371537 A20 9416Rear w/5 Spd. Over Drive Wide Ratio Trans., 4.9 & 5.0 L. EFI 3.08, 3.55 & 4.10 Axle Ratio MT 26 1/2" B

E8TA4602NA E8TZ4602U A20 9400

Rear w/4.9 & 5.0L. AOT AT 29 5/8" B E7TA4602SA A20 9431Rear w/C6 AT or New Process 435 MT, 5.0 & 5.8L. 3.50 Axle 30 11/16" B E7TA4602TA A20 9580

CODES: B Centerline of U-Joint located at the slip yoke end to centerline of the rear (furthest U-Joint) on the opposite end of prop shaft. Prop shaft must be collapsed. * New Number. Limited core supply may restrict availability. Type See pages ?????

11

REMANUFACTURED DRIVE SHAFTS / PROP SHAFTS

Year Application Length Code OEM Type Part

FORD (Cont'd)BRONCO (Cont'd)1987 Rear w/ 94" WB AT 30 1/4" B F376B3035C A9A 9458

Rear w/ 94" WB MT 35 1/2" B F376B4062BC A15 9457Front w/ 105" WB 35 1/2" B VXL3525CB A15 9440Rear w/C6 4.9 & 5.8L. EFI 3.08 & 3.55 Axle Ratio AT 29 5/8" B E7TA4602SA A20 9431Rear w/5.0L. EFI AOT AT 28 5/8" B 9126371537 A20 9416Rear w/5 Spd. Over Drive Wide Ratio Trans., 4.9 & 5.0L. EFI 3.08, 3.55 & 4.10 Axle Ratio MT 26 1/2" B

E8TA4602NA E8TZ4602U A20 9400

Rear w/4.9 & 5.0L. AOT AT 29 5/8" B E7TA4602SA A20 9431Rear w/C6 AT or New Process 435 MT, 5.0 & 5.8L. 3.50 Axle 30 11/16" B E7TA4602TA A20 9580

1986-85 Rear w/ 94" WB AT 30 1/4" B F376B3025C A9A 9458Rear w/ 94" WB MT 35 1/2" B F376B4062BC A15 9457Front w/ 105" WB 35 1/2" B VXL3525CB A15 9440Rear w/4.9 & 5.0L. EFI 4.11 Axle Ratio 30 1/4" B E5YZ4602L A1 9585Rear w/5.0L. EFI AOT 3.55 Axle Ratio AT 29 5/8" B E7TA4602SA A20 9431Rear w/C6 AT, 4 Spd. MT 5.0L. EFI & 5.8L. 3.50 Axle Ratio 31 5/16" B E5TZ4602K A20 9430Rear w/4.9L. 3.08 & 3.55 Axle Ratio., 5.0L. AOT 4.11 Axle Ratio 30 1/4" B E5TZ4602L A1 9585Rear w/5.0L. AOT 3.55 Axle Ratios AT 29 5/8" B E7TA4602SA A20 9431Rear w/4 Spd. w/MT 4.9L. 3.00 & 3.50 Axle Ratio. ALL 5.0 & 5.8L. 3.50 Axle Ratio 31 5/16" B E5TZ4602K A20 9430

1984 Rear w/94" WB AT 24 1/4" B 914155 A15 9456Rear w/4 Spd. 94" WB MT 24 1/4" B 914155 A15 9456Rear w/5 Spd. 94" WB MT 35 1/2" B F376B4062BC A15 9457Front w/105" WB 35 1/2" B VXL3525CB A15 9440Rear 30 1/16" B E3TZ4602AF A20 9832

1983 Front 35 1/2" B VXL3525CB A15 9440Rear 30 1/16" B E3TZ4602AF A20 9832

1982-80 Front 30 5/8" B EOTZ4602AP A20 9160Rear 30 5/8" B E0TZ4602AP A20 9160

1981-80 Front w/300, 302, 351 & C6 Eng. 435 4 Spd. V8 AT 33 1/2" B VXL3525CB A20 9193Rear 30 5/8" B E0TZ4602AP A20 9160

1980 Front w/300, 302, 351 & C6 Eng. 435 4 Spd. AT 32 3/4" B XL3763220 A15 9192Rear 30 5/8" B E0TZ4602AP A20 9160

1979 Front w/F/T Transcase. 351 Eng. AT 30 1/16" B D9TZ4602-U A20 9166Front w/P/T Transcase. 351 Eng. (1310/1330 Series ) AT 27 5/16" B D9TZ-4602-BS A20 9191Front w/P/T Transcase. 351 Eng. (1330 Series) AT 27 5/16" B EOTZ4602 A20 9190

Front w/P/T Transcase. 351 Eng. MT 24 3/8" B D9TZ-4602-AP/AK A1 9161Rear w/P/T Transcase. 351 Eng. AT 34 5/16" B D8TZ4602K A20 9164Rear w/P/T Transcase. 351 Eng. MT 37 5/16" B D8TZ4602H A20 9162

1978 Front w/F/T 203 Transcase. 351 Eng. 3.00 Axle Ratio AT 30 1/16" B D8TZ-4602-S A1 9157Front w/F/T 203 Transcase. 400 Eng. 3.00 Axle Ratio AT 30 1/16" B D8TZ4602U A20 9175Front w/F/T 205 Transcase. 351 Eng. 3.00 Axle Ratio AT 27 5/16" B D8TZ-4602L A1 9169Front w/P/T 205 Transcase. 400 Eng. 3.00 Axle Ratio AT 27 5/16" B D8TZ-4602-T A20 9173Front w/P/T 205 Transcase. 351 & 400 Eng. 3.50 & 4.11 Axle Ratio MT 24 3/8" B D8TZ-4602-R A1 9167Rear w/F/T 203 Transcase. 351 Eng. 3.00 Axle Ratio AT 20 3/8" B D8TZ4602J A1 9172Rear w/F/T 203 Transcase. 400 Eng. 3.00 Axle Ratio AT 30 1/16" B D8TZ4602U A1 9176Rear w/P/T 205 Transcase. 351 Eng. 3.00 Axle Ratio AT 34 3/8" B D8TZ4602K A1 9170Rear w/P/T 205 Transcase. 400 Eng. 3.00 Axle Ratio AT 27 5/16" B D8TZ4602T A1 9174Rear w/P/T 205 Transcase. 351 & 400 Eng. 3.50 & 4.11 Axle Ratio MT 37 5/16" B D8TZ4602H A1 9165

CODES: B Centerline of U-Joint located at the slip yoke end to centerline of the rear (furthest U-Joint) on the opposite end of prop shaft. Prop shaft must be collapsed. * New Number. Limited core supply may restrict availability. Type See pages ?????

12

REMANUFACTURED DRIVE SHAFTS / PROP SHAFTS

Year Application Length Code OEM Type Part

FORD (Cont'd)BRONCO (Cont'd)1977-74 Front 22 1/4" B D1TZ4602G A1 9149

Rear w/302 Eng. 31 1/4" B D4TZ-4602M A1 91531973-71 Front 22 1/4" B D1TZ4602G A1 9149

Rear 31 1/4" B D4TZ-4602M A1 91531970-66 Front 23 5/16" B C9TZ4602Z A1 9152

Rear 31 1/4" B D4TZ-4602M A1 9153

BRONCO II GKN Design 1987-85 Front w/4WD AT (Conversion Design Replacement Only) 39 3/4" C A9A 98261990-6/89 Rear w/2WD AT (Conversion Design Replacement Only) 36 1/4" C A9A 9823

Rear w/2WD MT (Conversion Design Replacement Only) 39 11/16" C A9A 98241990-88 Rear w/4WD AT (Conversion Design Replacement Only) 30 1/4" C A9A 9822

Rear w/4WD 4 Spd. MT (Conversion Design Replacement Only) 32 11/16" C A9A 9821Rear w/4WD 5 Spd. MT (Conversion Design Replacement Only) 30 1/4" C A9A 9822

1990-86 Rear w/2WD & 4WD MT (Conversion Design Replacement Only) 36 5/8" C A9A 98251989-88 Rear w/2WD AT (Conversion Design Replacement Only) 30 1/4" C A9A 9822

Rear w/2WD MT (Conversion Design Replacement Only) 32 11/16" C A9A 98211987-86 Rear w/2WD & 4WD AT (Conversion Design Replacement Only) 30 1/4" C A9A 9822

Rear w/2WD & 4WD MT (Conversion Design Replacement Only) 32 11/16" C A9A 98211985-84 Rear w/4WD AT (Conversion Design Replacement Only) 30 1/4" C A9A 9822

Rear w/4WD MT (Conversion Design Replacement Only) 32 11/16" C A9A 9821

Original Design - Ford Bronco II (GKN Design)

Conversion Design Replacement for GKN Design Ball & Cage Shaft

Our replacement design shaft is a Conven. type drive shaft using a spline and slip yokedesign with replaceable U-Joints. All driveshafts are balanced up to 3500 RPM's.

BRONCO II Spicer Design 1985-83 Rear w/3 Spd. AT 30 3/16" B 909652600 A5 9731

Rear w/4 Spd. AT 25 1/2" B 9136821001 A6 9428Rear w/MT (1 flange on each end.) 28 5/16" B 9141551522 A3 9833Rear w/MT (only 1 flange on end.) 28 5/16" B E5TZ4602N A5 9834

ESCAPE2005 Rear Section of 2 Piece Driveshaft 22 1/4" W YL844602BM A39 *9463EXCURSION 2004-01 Front From 10-1999 5.4 Liter 38 1/2" B YC3W4A376AB A4 *93022003-00 Front Over 8500 GVW 40 1/2" B YC3W4A376EB A4 *93042003-99 Front From 10-1999 7.3 Liter Diesel 39 3/8" B YC3W4A376VA A4 *93032002 Front 5.4 Liter 34 7/8" B YC3W4A376SA A4 *93012002-00 Front 5.4/6.8 Liter 4R 100 37 1/4" B YC3W4AA376AA A4 *93252001 Front w/5.4L Eng. 36" B F81W4A376HA A4 9300

Front w/6.8L Eng. YC3W4A376AB A4 9298

CODES: B Centerline of U-Joint located at the slip yoke end to centerline of the rear (furthest U-Joint) on the opposite end of prop shaft. Prop shaft must be collapsed. C Face of flange to face of flange. Shaft must be collapsed. Some applications have a flange on one end only. Measure face of flange to centerline of rear U-Joint. W Tube length only. Measure centerline of weld to centerline of opposite weld. * New Number. Limited core supply may restrict availability. Type See pages ?????

13

REMANUFACTURED DRIVE SHAFTS / PROP SHAFTS

Year Application Length Code OEM Type Part

FORD (Cont'd)EXCURSION (Cont'd)2001 Front w/7.3L Eng. Diesel 39 3/4" C YC3W4A376EB A4 9299

Front w/5.4 L Eng[Thru 9/99] 38 1/2" B YC3W4A376AB A4 9302Front w/6.8L Eng. (Thru 9/99) 36" B F81W4A376HA A4 9300Front w/7.3L Eng. Diesel (Thru 9/99) 38 1/2" B YC3W4A376AB A4 9302

EXPEDITION 2005-03 Front 20" W 2L1W4A376AA A9A *95422002-97 Front 5.4 Liter 38 5/8" C F75W4A376BC A9A *95432001-99 Front w/7.3L Eng. Diesel (From 10/99) 39 3/4" C F81W4A376MA A4 9299

Front w/4.6L Eng. 25" W F65W4A376AA A9A 9297Rear w/4.6L Eng. Std. Susp. 4x4 39 3/4" B XL1Z4602BA A23 9510Front w/5.4L Eng. 25" W F75W4A376BC A9A 9317Rear w/5.4L Eng. Auto Susp. 4x4 34 1/2" B F376A4006AZ A23 9511Rear w/5.4L Eng. Std. Susp. 4x4 34 7/16" B 52093325 A22 9512Front w/4.6 L. SOHC V8, 4 Spd. AT 3.55 Axle Ratio (Regular) 40 1/4" B F75A4602PP A3 9869Rear w/4R70W Trans 4.6L. 8.8" Axle 4x4 39 7/8" B F75A4602RA A23 9864Rear w/E40D Trans. 5.4L. 9.75" Axle 4x4 34 7/16" B F75A4602TB A23 9866

EXPLORER 2005-02 Front 4DR exc Sport Trac 4.0L 22 1/4" W

1L244A376AD, AE, or AF A18 *9462

2005-04 Front 4DR Sport Trac 24" W F77A4376BB A18 94512003-01 Front 2DR Sport 4.0 Liter 24" W F77A4376BB A18 94512003-01 Front 4DR Sport Trac 24" W F77A4376BB A18 9451

2003-02 Front 4.0 Liter exc Sport Trac 22 1/4" W1L244A376AD, AE,

or AF A18 *94622001-99 Front w/4.0L Eng. 4WD 24" W F77A4376BB A18 9293

Front w/5.0L Eng. AWD 23" W F77A4376CB A18 92941998 Front w/5.0L. Eng. All Trans. All Axle Ratios 23" W F77A4376CB A18 9450

Front Exc. 2 Door 4.0L ONLY 24" W F77A4376BB A18 94511997 Front Exc. 2 Door 4.0L ONLY 24" W F77A4376BB A18 9451

1996 1/2Front w/ Circular Flange at Transcase 96 1/2 only Will Not Fit 1997 Mdl. 27 13/16" B F57A4376BA A2 9622

1996-95 Front Exc. 2 Door 28 1/4" B F57A4376AB A1 9623Rear w/2 Door All Trans. All Eng. All Axle Ratios 32 15/16" B F57W4602LC A4A 9624

1994-91 Front w/4.0L Eng. 4 Spd AT 5 Spd MT 29 7/16" BF37A4A376BB F37A4A376B A1 9661

F150 2004 Front 5.4 Liter AT 4R100 21" W F75W4A376BC 2F *95442004 Front 4.2 Liter and 4.6 Liter 22" W F65W4A376AA 2F *95452003-98 Front 5.4 Liter AT 4R70W AT 22" W F65W4A376AA 2F *95452003-99 Front 4.2 Liter 22" W F65W4A376AA 2F *95452003-98 Front 4.6 Liter 22" W F65W4A376AA 2F *95451998-97 Rear w/4.2 & 4.6 L. M50D, 4R70W Trans. 120" WB 41 1/2" B XL3W4602BA A23 9453

Rear w/5.0 L. E40D Trans. 120" WB 36" B F65W4602JA A23 94541996-94 Front w/4R70W 117", 133", 139" & 155" WB AT B F65W4A376AA A15 9445

1996-90 Front w/E40D, E40D 8 Cyl.(1990) 117", 133", 139" & 155" WB AT 39 1/2" B F6TW4A376RA A15 9444

1996-88Front w/E40D 6 Cyl.(1990), C6 AT or 4 Spd. 117", 133", 139" & 155" WB MT 39 1/2" B E8TW4A376BA A20 9442Front w/5 Spd. 117",133",139" & 155" WB MT 37 1/2" B F6TW4A376PA A15 9443

1993-85 Front w/ AOT w/117", 133", 139" & 155" WB AT 35 1/2" B E8TW4A376CA A15 94411987-83 Front w/117", 133" & 155" WB 35 1/2" B VXL3525CB A15 9440

CODES: B Centerline of U-Joint located at the slip yoke end to centerline of the rear (furthest U-Joint) on the opposite end of prop shaft. Prop shaft must be collapsed. C Face of flange to face of flange. Shaft must be collapsed. Some applications have a flange on one end only. Measure face of flange to centerline of rear U-Joint. W Tube length only. Measure centerline of weld to centerline of opposite weld. * New Number. Limited core supply may restrict availability. Type See pages ?????

14

REMANUFACTURED DRIVE SHAFTS / PROP SHAFTS

Year Application Length Code OEM Type Part

FORD (Cont'd)F100 & F150 1982

Front w/300, 302, 351 & 400 Eng. C6 435 4 Spd. 116", 133" & 155" WB AT 32 3/4" B XL3763220 A15 9192

1981-80Front w/300, 302, 351 & 400 Eng. C6 435 4 Spd. 116", 133" & 155" WB AT 33 1/2" B A20 9193

1979 Front w/116.8" & 133" WB AT 30 1/16" B D9TZ-4602U A20 9166Front w/F/T Transcase. 351 Eng. 155" WB AT 30 7/8" B D9TZ-4602X A20 9177Front w/P/T Transcase. 400 Eng. 155" WB MT 25 5/16" B D9TZ-4602V A20 9178

1979 Rear w/P/T Transcase. 116.8 WB MT 51" B D9TZ-4602-AN A1 91581978 Front w/F/T 203 Transcase. 113" & 166.8" WB 30 1/16" B D8TZ-4602-S A1 9157

Front w/F/T 203 Transcase. 3.00 Axle Ratio 113" & 166.8" WB AT 30 1/16" B D8TZ-4602-U A20 9175Rear w/P/T 205 Transcase. 116.8" WB 50 15/16" B D8TZ-4602-D A1 9159

1977Rear w/P/T Transcase. 351 & 400 Eng. C6 116" WB AT (After S/N# Y80,001) 50 15/16" B D8TZ-4602-D A1 9159Rear w/P/T Transcase. 351 & 400 Eng. C6 116" WB AT (Before S/N# Y80,001) 50 15/16" B D6TZ-4603-E A1 9180

1976 Rear w/116.8" WB MT 50 15/16" B D6TZ-4603-E A1 9180F250 2006-99 Front 6.0 Diesel SRW S.D. AT 04-06 38 1/4" B 5C344A376DA A4 93022006-99 Front 6.0 Diesel SRW MT 04-06 39 3/8 B 5C344A376BA A4 *93032006-99 Front 6.4 Liter 6.8 Liter 36" B 5C344A376FA A4 93002006-99 Front 7.3 Diesel 39 3/8" B F81W4A376MA A4 *93032003-00 Front 5.4/6.8Liter S.D. 4R 100 39 3/8" B F81Z4A376HA A4 *93032001 Front w/5.4 & 6.8L Eng. AT 36" B 5C344A376FA A4 9300

Front w/5.4 & 6.8L Eng. MT A4 9305Front w/7.3L Eng. Diesel 38 1/4" B 5C344A376DA A4 9302

2000-99 Front w/5.4 & 6.8L Eng. AT 36" B 5C344A376FA A4 9300Front w/5.4 & 6.8L Eng. MT 9305Front w/7.3L Eng. Diesel 38 1/4" B 5C344A376DA A4 9302

2002-99 Rear HD w/5.4L Eng. E4OD 137" WB AT 50 7/8" B F81Z4602DG A4 9110Rear HD w/5.4L Eng. E4OD 141.8" WB AT 57 1/4" B F81Z4602DK A4 9113Rear HD w/5.4L Eng. M5HD 137" WB MT 54 5/16" B F81Z4602DH A4 9116Rear HD w/5.4L Eng. M5HD 141.8 WB MT 60 9/16" B F81Z4602DL A4 9128Rear HD w/6.8L Eng. E4OD 137" WB AT 50 13/16" B F81Z4602CC A4 9111Rear HD w/6.8L Eng. E4OD 141.8" WB AT 57 1/4" B F81Z4602DM A4 9114Rear HD w/6.8L Eng. M5HD 137" WB MT 54 5/16" B F81Z4602DC A4 9117Rear HD w/6.8L Eng. M5HD 141.8" WB MT 60 13/16" B F81Z4602DN A4 9129Rear HD w/7.3L Eng. E4OD 137" WB AT 49 5/8" B F81Z4602CN A4 9112Rear HD w/7.3L Eng. E4OD 141.8" WB AT 54 7/16" B F81Z4602DQ A4 9115Rear HD w/7.3L Eng. M5HD 137" WB MT 51 5/8" B F81Z4602DA A4 9127Rear HD w/7.3L Eng. M5HD 141.8" WB MT 54 7/16" B F81Z4602DQ A4 9115

1996-88 Front w/C6 133" & 155" WB AT 39 1/2" B VXL3925CC A20 9442Front w/E40D 133" & 155" WB AT 39 1/2" B F6TW4A376PA A15 9444Front w/5.8L Eng.133" & 155" WB MT 37 1/2" B F6TW4A376PA A15 9443Front w/7.3L & 7.5L Eng. 133" & 155" WB MT 39 1/2" B E8TW4A376BA A15 9442

1993-85 Front w/AOT 133" & 155" WB AT 35 1/2" B E8TW4A376CA A15 94411987-83 Front w/133" & 155" WB 35 1/2" B VXL3525CB A15 94401979 Front w/F/T Transcase. 351 & 400 Eng. 133" & 155" WB AT 30 1/16" B D9TZ4602AA A20 9166

Front w/F/T Transcase. 351 & 400 Eng. AT 30 7/8" B D9TZ4602X A20 9177

CODES:

B Centerline of U-Joint located at the slip yoke end to centerline of the rear (furthest U-Joint) on the opposite end of prop shaft. Prop shaft must be collapsed.

W Tube length only. Measure centerline of weld to centerline of opposite weld.

* New Number. Limited core supply may restrict availability.

Type See pages ?????

15

REMANUFACTURED DRIVE SHAFTS / PROP SHAFTS

Year Application Length Code OEM Type Part

FORD (Cont'd)F250 (Cont'd)1979 Front w/P/T 205 Transcase. 133" WB MT 25 1/8" B D9TZ4602AG A20 9148

Front w/P/T Transcase. 351 & 400 Eng. w/Snowplow Opt. 133" & 155" WB AT 26 11/16" B D9TZ4602AG A20 9187Front w/P/T Transcase. 300 Eng. 133" & 155" WB MT 24 3/8" B D9TZ4602Y A20 9161Front w/P/T Transcase. 351 & 400 Eng. 133" WB AT 28" B D9TZ4602W A20 9163

1978 Front w/F/T 203 Transcase. 133" WB AT 30 13/16" B D2Z4602AH A20 9183Front w/F/T 203 Transcase. 133" WB AT 29 1/2" B D8TZ4602AN A1 9186Front w/P/T 205 Transcase. 133" WB AT 26 1/16" B D8TZ4602AM A1 9185

Front w/P/T 205 Transcase. w/Snowplow Opt. 133" WB MT 23 3/4" B D8TZ4602AL A20 91841977 Front w/P/T 205 Transcase. 133" WB AT 25 1/8" B D7TZ4602AG A20 9148

Front w/F/T 203 Transcase. 351 & 400 Eng. C6 133" WB (After S/N 40,001) AT 30 13/16" B D2TZ4602AH A20 9183Front w/P/T 205 Transcase.351 & 400 Eng. C6 133" WB (After S/N 40,001) AT 28" B D7TZ4602AJ A1 9182Rear w/F/T Transcase. 351 & 400 Eng.(1977) 133" WB (1976-74) AT 29 5/8" B D4TZ4602N A1 9155

1977-74Front w/F/T Transcase. 351 & 400 Eng.(1977) 133" WB (1976-74) AT 57 7/16" B D8TZ04602-M A1 9154Rear w/F/T Transcase. 351 & 400 Eng.(1977) 133" WB (1976-74) AT 29 5/8" B D4TZ4602N A1 9155

F350 2006-04 Front AT 38" B 5C344A376DA A4 *95462006-05 Front 5.4 and 6.8 Liter SRW L8L 36" B FC244A376FA A4 93002006-04 Front 6.0 Liter MT 39 3/8" B FC344A376KA A4 *93032004-99 Front 7.3 Diesel S.D. 39 3/8" B F81W4A376MA A4 *93032003-00 Front Over 8500 GVW 40 1/2" B YC3W4A376EB A4 *93042003-00 Front 5.4/6.8 Liter 4R11 SRW 39 3/8" B F81Z4A376HA A4 *93032002-99 Rear w/5.4L Eng. E4OD 137" WB AT 50 7/8" B F81Z4602DG A4 9110

Rear w/5.4L Eng. E4OD 141.8" WB AT 58 1/4" B F81Z4602DK A4 9135Rear w/Dual Rear Wheels 5.4L Eng. E4OD 137" WB AT 50 7/8" B F81Z4602DG A4 9110Rear w/5.4L Eng. E4OD 137" WB MT 54 5/16" B F81Z4602DH A4 9116Rear w/5.4L Eng. M5HD 141.8" WB MT 60 13/16" B F81Z4602DL A4 9136Rear w/Dual Rear Wheels 5.4L Eng. M5HD 137" WB MT 54 5/16" B F81Z4602DH A4 9116Rear w/6.8L Eng. E4OD 137" WB AT 50 13/16" B F81Z4602CC A4 9111Rear w/6.8L Eng. E4OD 141.8" WB AT 57 1/4" B F81Z4602DM A4 9114Rear w/Dual Rear Wheels 6.8L Eng. E4OD 137" WB AT 55 3/16" B F81Z4602CN A4 9134Rear w/6.8L Eng. M5HD 137" WB MT 60 13/16" B F814602DN A4 9129Rear w/6.8L Eng. M5HD 141.8 WB MT 48 13/16" B F81Z4602DA A4 9137Rear w/Dual Rear Wheels 6.8L Eng. M5HD 137" WB MT 54 5/16" B F81Z4602CS A4 9132Rear w/7.3L Eng. E4OD 137" WB AT 54 7/16" B F81Z4602DQ A4 9115Rear w/7.3L Eng. E4OD 141.8" WB AT 54 5/16" B F81Z4602DC A4 9117Rear w/Dual Rear Wheels 7.3L Eng. E4OD 137" WB AT 50 7/8" B F81Z4602CA A4 9131Rear w/7.3L Eng. M5HD 137" WB MT 54 7/16" B F81Z4602DQ A4 9115Rear w/7.3L Eng. M5HD 141.8" WB MT 50 7/8" B F81Z4602DA A4 9130Rear w/Dual Rear Wheels 7.3L Eng. M5HD 137" WB MT 54 5/16" B F81Z4602CA A4 9133

1996-95 Front w/C6 133", 137" & 168" WB AT 36 1/4" B E9TA4A376CD A20 9446Front w/E40D 133", 137" & 168" WB AT 35 1/4" B E9TA4A376CA A20 9449Front w/133", 137" & 168" WB MT 38 1/4" B E9TA4A376AA A20 9447

1994-89 Front w/C6 5.8 & 7.5L Eng. AT 32 3/4" BE5TZ4A376C E9TA4376DA A1 9721

CODES: B Centerline of U-Joint located at the slip yoke end to centerline of the rear (furthest U-Joint) on the opposite end of prop shaft. Prop shaft must be collapsed. * New Number. Limited core supply may restrict availability. Type See pages ?????

16

REMANUFACTURED DRIVE SHAFTS / PROP SHAFTS

Year Application Length Code OEM Type Part

FORD (Cont'd)F350 (Cont'd) 1994-89

Front w/ZF HD 5 Spd. Over Drive Wide or Close Ratio 7.3L. Diesel & 7.5L. Eng. 32 3/4" B

E9TA4A376-DA E5TZ4A376-C A1 9721

Front w/ZF HD 5 Spd. Over Drive Wide Ratio 5.8L. Eng. 35 11/16" BE9TA4A376-EA E9TZ4A376-D A20 9739

Front w/E40D Trans. ALL Engines 38 3/16" BE9TZ4A376-A

E9TA4A376-CA A2 9667

1988-85 Front 32 3/4" BE5TA4A376-DA E5TZ4A376-B A1 9721

1984-82 Front 35 1/2" B VXL3525CB A15 94401979 Front w/F/T Transcase. 351 & 400 Eng. AT 30 7/8" B D9TZ4602-X A20 9177

Front w/F/T Transcase. 351 & 400 Eng. 133" & 155" WB AT 30 1/16" B D9TZ4602AA A20 9166Front w/P/T Transcase. 351 & 400 Eng. 133" WB AT 28" B D9TZ4602-W A20 9163Front w/P/T Transcase. 351 & 400 Eng. w/Snowplow Opt. 133" & 155" WB AT 26 11/16" B D9TZ4602-W A20 9187Front w/P/T Transcase. 300 Eng. 133" & 155" WB MT 24 3/8" B D9TZ4602-Y A20 9161

1977-74Rear w/F/T 203 Transcase. 351 & 400 Eng.(1977) 133" WB (1976-74) 29 5/8" B D4TZ4602N A1 9155

NAVIGATOR 2004-02 Front 20" W 2L7W4A376AA A9A *95422002-99 Front 5.4Liter 38 5/8" C F75W4A376BC A9A 9317

Rear 34 1/4" B F75A4602SA A23 95111998-97 Front w/4.6L. SOHC 8 Cyl. 4 Spd. 3.55 Regular Axle Ratio AT 39 1/4" B F75A4602PP A4A 9869

Rear w/4.6L. 4R70W Trans. 8.8" Axle 39 7/8" B F75A4602RA A23 9864Rear w/5.4L. E40D Trans. 9.75" Axle 34 7/16" B F75A4602TB A23 9866

RANGER2006-99 Front 4.0L Only 24" W F77A4376BB A18 92931998 Front 4.0L Only 24" W F77A4376BB A18 9293

Rear w/2.3, 3.0 & 4.0L. Eng. ALL Trans. ALL WB 24 1/4" W F774A376BB A18 94551997-95 Front w/2.3 L. & 3.0L. ALL Trans. ALL WB 30 3/4" B F37A4A376CB A1 9672

Front w/4.0 L. ALL Trans. ALL WB 29 7/16" B F37A4A376BB A1 9661Rear 40 1/2" B F57A4602AC A3 9675

1994-93Front w/4 Spd. AT 5 Spd. MT 2.3L. & 3.0L. Eng. ALL WB (Incl. Super Cab) 30 3/4" B F37A4A376CB A1 9672

Front w/4 Spd. AT 5 Spd. MT 4.0L. Eng. ALL WB (Incl. Super Cab) 29 7/16" B F37A4A376BB A1 9661

Rear w/4 Spd. AT 5 Spd. MT 2.3, 2.9, 3.0 & 4.0L. Eng. SWB 40 9/16" B F37A4602PA A4A 9662

1992-90 Front 29 7/16" BF37A4A376BB FOTZ42376AA A1 9661

Rear w/4 Spd. AT 5 Spd. MT 2.3, 2.9, 3.0 & 4.0L. Eng. SWB 40 9/16" B F37A4A376PA A4A 96621989 Front 26 1/2" B E77A4A376DA A20 9638

Rear w/4 Spd. AT 5 Spd. MT 2.9L. Eng. w/STX Trim Package SWB 40 1/2" B E97A4602AB E9TZ4602H A4A 9642

1988 Front w/4 Spd. AT 5 Spd. MT w/STX Trim Package 26 1/2" B E77A4A376DA A20 9638Rear w/4 Spd. AT 5 Spd. MT 2.3 & 2.9L. Eng. w/STX Trim Package SWB 39 13/16" B E77A4602AFA A5 9423Rear w/5 Spd. MT 2.3 L. Eng. Diesel, 2.9L. Eng. w/STX Trim Package SWB 42 1/4" B E77A4602AEA A5 9636

1987 Front w/4 Spd. 2.9L. Eng. AT w/STX Trim Package 26 1/2" B E774A376DA A1 9641

CODES: B Centerline of U-Joint located at the slip yoke end to centerline of the rear (furthest U-Joint) on the opposite end of prop shaft. Prop shaft must be collapsed. C Face of flange to face of flange. Shaft must be collapsed. Some applications have a flange on one end only. Measure face of flange to centerline of rear U-Joint. W Tube length only. Measure centerline of weld to centerline of opposite weld. * New Number. Limited core supply may restrict availability. Type See pages ?????

17

REMANUFACTURED DRIVE SHAFTS / PROP SHAFTS

Year Application Length Code OEM Type Part

FORD (Cont'd)RANGER (Cont'd)1987 Front w/5 Spd. 2.9L. Eng. Over Drive MT 26 1/2" B E774A376DA A1 9641

Rear w/4 Spd. 2.9L. Eng. w/STX Trim Package SWB AT 39 13/16" B E77A4602AFA A5 94231986 Rear w/4 Spd. 2.9L. Eng. SWB AT 40 1/4" B E67A4602EA A3 9433

Rear w/5 Spd. Over Drive 2.3 & 2.3L. Eng. Diesel SWB MT 42 11/16" B E67A4602GA A3 94321985 Rear w/4 Spd. 2.3 & 2.8L. Eng. SWB AT 39 13/16" B E77A4602AFA A5 9423

1985-83 Rear w/C5 AT 2.8L. Eng. M4 MT 2.3 & 2.8L. Eng. SWB 44 1/4" B

E47A4602LA E3TZ4602AB E37A4602FB A5 9830

Rear w/5 Spd. Over Drive 2.3, 2.3L. Diesel & 2.8L. Eng. SWB 42 5/16" BE37A4602JB E3TZ4602AC A5 9831

GEOTRACKER 2003-99 Front w/AT 2.5L 17 1/4" W A23 9287

Front w/MT A23 92882000-99 Front w/AT 17 1/4" W A23 9287

Front w/MT A23 92861998-96 Front w/2 Door 17 1/2" W 58429 A23 9470

Front w/4 Door AT 15 1/2" W 58587 A23 9471Front w/4 Door MT 17 1/2" W 58429 A23 9470

1995-86 Front 17 1/2" W 58429 A23 9470

GMC - SEE CHEVROLET/GMCHONDAPASSPORT 2001-98 Front 4WD w/AT 24" B 8971253022 A4A 9139

Front 4WD w/MT 17 1/2" B 8971253012 A4A 91381997-94 Front 4WD w/MT 24 1/2" C 58560 A9A 9472

ISUZU AMIGO 2001-99 Front w/6 Cyl. Eng. AT 24" B 8971253022 A4A 9139

Front w/6 Cyl. Eng. MT 17 1/2" B 8971253012 A4A 91381999-98 Front w/4 Cyl. SWB MT 13 7/8" B 8971253031 A4A 97781994 Front 24 1/2" C 58560 A9A 94721993-89 Front 58431 A9A 9481ASCENDER2005-03 Front 4.2 Liter 19" W 15036981 A17 *93292005-03 Front 5.3 Liter 26 1/2" W 15152342 A17 *9330FRONTERA 1999 Front w/4 Cyl. Long WB MT 13 7/8" B 8971253031 A4A 9778PICKUP 1995-88 Front 58431 A9A 9481RODEO 2001-99 Front w/6 Cyl. Eng. AT 24" B 8971253022 A4A 9139

Front w/6 Cyl. Eng. MT 17 1/2" B 8971253012 A4A 91381999-98 Front w/4 Cyl. SWB MT 13 7/8" B 8971253031 A4A 97781997-93 Front w/MT 24 1/2" C 58560 A9A 9472TROOPER 2001-98 Front w/oTorque on Demand System 23" W A17 92851997-92 Front w/MT 24 1/2" C 58560 A9A 9472

CODES: B Centerline of U-Joint located at the slip yoke end to centerline of the rear (furthest U-Joint) on the opposite end of prop shaft. Prop shaft must be collapsed. C Face of flange to face of flange. Shaft must be collapsed. Some applications have a flange on one end only. Measure face of flange to centerline of rear U-Joint. W Tube length only. Measure centerline of weld to centerline of opposite weld. * New Number. Limited core supply may restrict availability. Type See pages ?????

18

REMANUFACTURED DRIVE SHAFTS / PROP SHAFTS

Year Application Length Code OEM Type Part

JEEPCHEROKEE 2001 Front w/4.0L Eng. AT 30 11/16" B 52098341 A1 9311

Front w/4.0L Eng. MT 29 1/4" 53005543 A1 9312

2000-99Front w/4.0L. Eng. Aisen Warner 4 Spd. Kanda Transcase Mdl. 44 Dana Axle SWB AT 28 5/8" B 53005545 A1 9140Front w/ 2.1L & 2.5L Eng. Aisen 5 Spd. 231 Transcase Mdl. 30 Dana Axle MT 25 5/16" B 53005541 A1 9141Front w/4.0L Eng. Aisen Seiki 5 Spd. Kanda Transcase Mdl. 44 Dana Axle MT 27 1/16" B 53005544 A1 9142

1999Front w/4.0L Eng. Aisen Warner 4 Spd. 231 & 242 Transcase Mdl. 30 Dana Front Axle AT 30 5/8" B 53005542 A1 9143Front w/4.0L Eng. Aisen Seiki 5 Spd. 231Kanda Transcase Mdl. 30 Dana Axle MT 29 1/4" B 53005543 A1 9144

1998-95Front w/4.0L. Aisen Warner 4 Spd. 231 & 242 Transcase.Dana Mdl. 30 Front Axle AT 30 1/2" B 52098341 A1 9776Front w/4.0L. Eng. Aisen Warner 4 Spd. Kanda Transcase. Dana Mdl. 44 Front Axle AT 28 3/4" B 53005545 A1 9764Front w/2.1 & 2.5L. Eng. Aisen 5 Spd. 231Transcase. Dana Mdl. 30 Front Axle MT 25 5/16" B 53005541 A1 9668Front w/4.0L. Eng. Aisen Seiki 5 Spd. 231Kanda Transcase. Dana Mdl. 30 Front Axle MT 29 1/4" B 53005543 A1 9670Front w/4.0L. Eng. Aisen Seiki 5 Spd. Kanda Transcase. Dana Mdl. 44 Front Axle MT 27 1/16" B 53005544 A1 9752

1996-95 2.5 L.Turbo Eng. 5 Spd. 231 Transcase. Dana Mdl. 30 Front Axle MT 27 5/8" B 52098208 A1 97371986-85 Front w/4 & 5 Spd. Trans. ALL Eng. 25 1/16" B A1 9749CHEROKEE/COMANCHE/WAGONEER 1994-90 Front w/2.5L. Eng. 231 Transcase Dana Mdl. 30 Frt Axle AT 28" B 53005540 A1 9671

Front w/4.0L. Eng. Aisen Warner 4 Spd. 231 & 242 Transcase. Dana Mdl. 30 Front Axle AT 30 11/16" B 53005541 A1 9669Front w/4.0L. Eng. Aisen Warner 4 Spd. Kanda Transcase. Dana Mdl. 44 Front Axle AT 28 3/4" B 53005545 A1 9764Front w/2.1 & 2.5L. Eng. Aisen 5 Spd. 231 Transcase. Dana Mdl. 30 Front Axle MT 25 5/16" B 53005541 A1 9668Front w/4.0L. Eng. Aisen Seiki 5 Spd. 231Kanda Transcase. Dana Mdl. 30 Front Axle MT 29 1/4" B 53005544 A1 9670Front w/4.0L. Eng. Aisen Seiki 5 Spd. Kanda Transcase. Dana Mdl. 44 Front Axle MT 27 1/16" B 53005544 A1 9752

1988 Front w/6 Cyl. Peugeot, Kanda P/T Transcase 4.11 Axle Ratio AT 28" B 8953003912 A1 9671Front w/6 Cyl. Peugeot, 242/231 Transcase 3.08 Axle Ratio AT 29 1/4" B 8953005039 A1 9438Front w/6 Cyl. 242/231 Transcase. 3.55 Axle Ratio AT 30 11/16" B 8953005040 A1 9738Front w/4 Cyl. Aisen 4 & 5 Spd. 231 Transcase. 3.55 & 4.11 Axle Ratio MT 25 3/4" B 8953003235 A1 9436

CHEROKEE/WAGONEER 1986-84 Front GKN Design Only 25 1/8" B 915723X A8 9820CHEROKEE/WAGONEER/J10/J20 1983-82 Front w/6 Cyl. 5 Spd. MT 29 1/4" B 5360997 A1 94381983-80 Front w/6 Cyl. AT 29 1/4" B 5360997 A1 94381983-80 Front w/8 Cyl. AT 25 3/4" B 5360996 A1 9436

Front w/6 & 8 Cyl. 4 Spd. MT 26 3/8" B 5360995 A1 97581977-74 Front w/6 & 8 Cyl. 3 Spd. 20" B 5356503 A1 9754

Front w/6 & 8 Cyl. 4 Spd. V-8 Hydramatic Trans. Quadratrac 24 3/8" B 5356505 A1 9755CODES: B Centerline of U-Joint located at the slip yoke end to centerline of the rear (furthest U-Joint) on the opposite end of prop shaft. Prop shaft must be collapsed. Type See pages ?????

19

REMANUFACTURED DRIVE SHAFTS / PROP SHAFTS

Year Application Length Code OEM Type Part

JEEP (Cont'd)CJ-7 1979-77 Front w/AT 36 5/8" B

5355573 5359382 5356502 A1 9757

CJ-10 1983-82 Front w/AT 31 3/16" B 5994167 A1 9763

Front w/MT 28 3/4" B 5994166 A1 9764GRAND CHEROKEE 2005 Front 4.7L, 5.7L 18 7/8" W 52105728AC A37 *97802004-02 Front 4.0L 21" W 52105884AA A35 *97672003-02 Front 4.7L 32" B 52853500AA A1 *97812003 Front V-8 19" W 52115597AA A36 *97822002-99 Front w/4.0L Eng. 21" W 52099497AC A37 9313

Front w/4.7L Eng. 20" W 52099498AB A37 9314

1998-96Front w/5.2 & 5.9L. Eng. 249 Transcase. Dana Mdl. 30 Front Axle AT (Must install 2-4-6561-1 Yoke at Axle Input) 29 5/8" B 56022666AA A1 9779Front w/4.0L. Eng. 249 Transcase. Dana Mdl. 30 Frt. Axle AT 31 1/2" D 52099260 A7 9762

1997-95 1/2 Front w/5.2L. Eng. 249 Transcase. Dana Mdl. 30 Frt. Axle AT 29 15/16" D 52098379 A7 9761

1997-96 1/2 Front w/2.5L. Eng. 5 Spd. 231 Transcase. Dana Mdl. 30 Frt. Axle MT 29 1/4" B 5363399 A1 9438

1996 Front w/5.2L. Eng. 249 Transcase. Dana Mdl. 30 Frt. Axle AT 28 1/4" D 52099246 A7 9769Front w/2.5& 4.0L. Eng. 5 Spd. 231 Transcase.Dana Mdl. 30 Frt. Axle MT 27 5/8" B 52098208 A1 9737

Front w/4.0L. Eng. 5 Spd. 242 Transcase. Dana Mdl. 30 Frt. Axle MT 31 3/4" B 52098707 A1 9760

1996-95 1/2 Front w/4.0L. Eng. I-6 Auto., 249 Transcase Dana Mdl. 30 Frt. Axle 31 1/2" D 52099260 A7 9762

Front w/4.0L. Eng. I-6 Auto., 249 Transcase Dana Mdl. 30 Frt. Axle 30 1/2" D 52098850 A7 97701995 1/2 Front w/5.2L. Eng. 249 Transcase. Dana Mdl. 30 Frt. Axle AT 32 7/8" D 52098501 A7 9771

1995 1/2-93 Front w/5.2L. Eng. 8 Cyl. 231Transcase. Dana Mdl. 30 Frt. Axle AT 32 7/8" D 53008427 A1 9773Front w/4.0L. Eng. 8 Cyl. 231, 242 & 249 Transcase. Dana Mdl. 30 Frt. Axle AT 30 1/2" B 52087805 A1 9774

1995-92 1/2 Front w/4.0L. Eng. 5 Spd. 231 Transcase. Dana Mdl. 30 Frt. Axle MT 28" B 53005540 A1 9775GRAND CHEROKEE/GRAND WAGONEER 1993-92 1/2

Front w/4.0L. Eng. Aisen Warner 231, 242 & 249 Transcase. Dana Mdl. 30 Frt. Axle 30 1/2" B 52098341 A1 9776

J10/J20 1977-74 Front w/6 Cyl. Hydramatic Trans. Quadratrac 29" B 5352119 5356506 A1 97561973 Front w/6 Cyl. AT 31 1/2" B 5351017 A1 97531973-72 Front w/8 Cyl. AT 27 1/16" B 5351018 A1 97521973-71 Front w/350 8 Cyl. 4 Spd. AT 25 5/16" B 5359385 A1 9751J20 1983-80 Front w/6 & 8 Cyl. 4 Spd. 131" WB 35 3/8" B 5360998 A1 9759

B Centerline of U-Joint located at the slip yoke end to centerline of the rear (furthest U-Joint) on the opposite end of prop shaft. Prop shaft must be collapsed. C Face of flange to face of flange. Shaft must be collapsed. Some applications have a flange on one end only. Measure face of flange to centerline of rear U-Joint. D From the base of the bolt on the outer plate of the C.V. Joint to the centerline of the furthest rear U-Joint. W Tube length only. Measure centerline of weld to centerline of opposite weld. * New Number. Limited core supply may restrict availability. Type See pages ?????

20

REMANUFACTURED DRIVE SHAFTS / PROP SHAFTS

Year Application Length Code OEM Type Part

JEEP (Cont'd)LIBERTY2005-02 Front 3.7L 16 1/2" W 52111596AB A37 *93242004-02 Front 2.8L w/AT 20" W 52099497AB A37 *9323

Front 19" W 52115597AA A37 *9326Front 2.8L w/MT 16 1/2" W 52111596AB A37 *9324

SENIOR JEEP (GRAND WAGONEER) 1991-90 Front w/5.9 L.Eng.727 AT 229 Transcase. Dana Mdl. 44 Frt. Axle 25 3/4" B 53005539 A1 9436WAGONEER/J10/J20 1979 Front w/6 Cyl Hydramatic Trans. 29" B 5352119 5356506 A1 9756

Front w/8 Cyl. 3 Spd. 20" B 5359383 A1 9754Front w/8 Cyl. 4 Spd. Hydramatic Trans. 25 5/16" B 5359386 A1 9751

1978 Front w/6 Cyl. Hydramatic Trans. 29" B 5359385 A1 9756Front w/8 Cyl. 4Spd. Hydramatic Trans. 25 5/16" B 5359386 A1 9751

WRANGLER 2001-98 Front w/4 Cyl. 38" B 52098378 A1 9315

Front w/6 Cyl. AT 38" B 52098378 A1 9315Front w/6 Cyl. MT 39 1/2" B 52098377 A1 9316

1997Front w/2.5 & 4.0L. Eng. AT. 4 Spd. MT. Dana Mdl. 30 Front Axle 231/242 38" B 52098378 A1 9765Front w/4.0L. Eng. 5 Spd.MT Dana Mdl. 30 Front Axle 231/242 39 1/2" B 52098377 A1 9766

LANDROVERLANDROVER 2001-00 Front 25 1/4" C 5863525025 A4A 92711999 Front Discovery Series II 25 1/4" C 5863525025 A4A 92711999-98 Front Discovery Exc. Series II 23 1/4" C 5836423025 A3 99211997-94 Front Defender 90 23 1/4" C 5836423025 A3 9921

Rear Defender 90 25 3/4" C 5836525075 A1 99221993 Front Defender 110 A129 9270RANGE ROVER 2001-00 Front 24 1/4" C 5857324025 A9A 92731999-96 Front 24 1/4" C 5857324025 A9A 92731995 Front w/4.0 SE 24 1/4" C 5857324025 A9A 9273

Front Country Classic 58535 A9A 9272Rear 32 3/4" C 5879132075 A3 9924

1994-89 Front w/3.9L & 4.2L Eng. 58635 A9A 9272Rear 32 3/4" C 5863732075 A3 9924

1988-87 Front w/3.5L Eng. 23 1/4" C 5836423025 A3 9921Rear 32 3/4" C 5879133075 A3 9924

1986-83 Front 24 1/2" C 5857324050 A3 9923Rear 32 3/4" C 5879132075 A3 9924

LEXUSLX 450 1998-96 Front 30 1/4" C 5859430025 9851LX 470 2001-98 Front 23" C 5859523000 A12 9269

MAZDAB-2300 1997-94 Front 29 7/16" B F37A4A376BB A1 9295

CODES: B Centerline of U-Joint located at the slip yoke end to centerline of the rear (furthest U-Joint) on the opposite end of prop shaft. Prop shaft must be collapsed. C Face of flange to face of flange. Shaft must be collapsed. Some applications have a flange on one end only. Measure face of flange to centerline of rear U-Joint. W Tube length only. Measure centerline of weld to centerline of opposite weld. * New Number. Limited core supply may restrict availability. Type See pages ?????

21

REMANUFACTURED DRIVE SHAFTS / PROP SHAFTS

Year Application Length Code OEM Type Part

MAZDA (Cont'd)B-3000 2004-98 Front 24" W F37A4A376BB A18 92931997-94 Front w/AT 29 7/16" B F37A4A376BB A1 9295

Front w/MT 28 1/4" B F57A4376AB A1 9296B-4000 2005-98 Front 24" W F77A4276BB A18 92931997-94 Front w/MT 29 7/16" B F57A4376AB A1 9296NAVAJO 1994-91 Front 29 7/16" B F37A4A376BB A1 9661PICKUP 1998 Rear w/2.3, 3.0 & 4.0L. Eng. ALL Trans, ALL WB 24 1/4" W F77A4A376BB A18 94551997-95 Front w/2.3 & 3.0L. Eng. ALL Trans. ALL WB 30 3/4" B F37A4A376CB A1 9672

Front w/4.0L. Eng. ALL Trans. ALL WB 29 7/16" B F37A4A376BB A1 9661Rear 40 1/2" B F57A4602AC A3 9675

1994 Front w/4.0L Eng. 4 Spd. AT 5 Spd. MT ALL WB 29 7/16" B F37A4A376BB A1 9661Front w/2.3, 3.0 & 4.0L. Eng. 4 Spd. AT 5 Spd. MT ALL WB 30 3/4" B F37A4A376CB A1 9672Front w/2.3 & 3.0L. Eng. 4 Spd. AT 5 Spd. MT Super Cab 30 3/4" B F37A4A376CB A1 9672Front w/4.0L. Eng. 4 Spd. AT 5 Spd. MT Super Cab 29 7/16" B F37A4A376BB A1 9661

1994 Rear w/2.3, 3.0 & 4.0L. Eng. 4 Spd. AT 5 Spd. MT SWB 40 9/16" B F37A4662PA A4A 9662TRIBUTE2005-01 Rear Section of 2 piece Driveshaft 22 1/4" W YL844602BM A39 *9463

MERCEDES BENZM CLASS AAV SPORTS UTILITY 1999-97 Front w/3.2L. Eng. 6 Cyl. 5 Spd. 16 1/2" W 65597 9703

Rear w/3.2L. Eng. 6 Cyl. 5 Spd. 7" W 65989 A22 9704

MERCURYMOUNTIANEER 2005-02 Front 4 Door 22 1/4" W

1L244A376AD,AE or AF A18 *9462

2001-99 Front w/4.0L Eng. 4WD 24" W F77A4376BB A18 9293Front w/5.0L Eng. AWD 23" W F77A4376CB A18 9294

1998 Front w/5.0L. Eng. ALL Trans. ALL Axle Ratios 22 3/4" W F77A4376CB A18 9450Front Exc. 2 Door 4.0 L ONLY 24" W F77A4376BB A18 9451

1997 Front Exc. 2 Door 4.0 L ONLY 24" W F77A4376BB A18 9451

1996 1/2Front w/ Circular Flange at Transcase-96 1/2 Only Will Not Fit 1997 Mdl. 27 13/16" B F57A4376BA A20 9622

1996 Front Exc. 2 Door 28 1/4" B F57A4376AB A1 9623

MITSUBISHIMONTERO 2001 Front Exc. Sport 12" W MR342 A30 92842001-00 Front Sport w/3.0L Eng. 12 1/2" W MR391 A30 9282

Front Sport w/3.5L Eng. 11 1/4" W MR351 A30 92832000-99 Front Exc. Sport (from 8/3/98) 26" C MR742 A30 92811999 Front Sport w/3.0L Eng. AT 14 1/4" W MR791 A30 9277

Front Sport w/3.0L Eng. MT 20 1/4" C MR318 A30 9278Front Sport w/3.5L Eng. 10 1/2" W MR410 A1 9280

1998-97 Front Sport w/AT 14 1/4" W MR791 A30 9277Front Sport w/MT 20 1/4" C MR318 A30 9278Front Exc. Sport (thru 8/2/98) 25" C MR610 A9A 9279

1996 Front LS w/3.0L Eng. 10 1/4" W M96305 A9A 9475

CODES: B Centerline of U-Joint located at the slip yoke end to centerline of the rear (furthest U-Joint) on the opposite end of prop shaft. Prop shaft must be collapsed. C Face of flange to face of flange. Shaft must be collapsed. Some applications have a flange on one end only. Measure face of flange to centerline of rear U-Joint. W Tube length only. Measure centerline of weld to centerline of opposite weld. * New Number. Limited core supply may restrict availability. Type See pages ?????

22

REMANUFACTURED DRIVE SHAFTS / PROP SHAFTS

Year Application Length Code OEM Type Part

MITSUBISHIMONTERO 1996 Front SR w/3.5L Eng. 28 1/4" B M96307 A9A 94771995 Front LS w/3.0L Eng. AT 23 3/4" C M96308 A9A 9478

Front LS w/3.0L Eng. MT 10 1/4" W M96305 A9A 9475Front SR w/3.5L Eng. 28 1/4" B M96307 A9A 9477

1994 Front LS w/3.0L Eng. AT 8" W M96407 A9A 9476Front LS w/3.0L Eng. MT 10 1/4" W M96305 A9A 9475Front SR w/3.5L Eng. 28 1/4" B M96307 A9A 9477

1993-92 Front w/AT 8" W M96407 A9A 9476Front w/MT 10 1/4" W M96305 A9A 9475

PICKUP 1996-90 Front 25 1/4" C 58586 A9A 9474

NISSAND21 HARD BODY PICKUP 2001 Front w/6 Cyl. 25" C N68827 A9A 92912000 Front 6 Cyl. (6/00 ONLY) 25" C N68827 A9A 92912000-99 Front 6 Cyl. (thru 5/00) N68814 A9A 92901997-96 Front w/4 Cyl. MT 23 3/4" C M96308 A9A 94781995-90 Front w/AT 24 1/4" C N68715 A9A 9479

Front w/MT 23 1/4" C M96308 A9A 9478PATHFINDER 2001 Front From 8/00 w/all-mode 4X4 system A9A 9292

Front From 8/00 w/o all-mode 4X4 system 55891 A9A 94802000-96 Front (thru 7/00) 55891 A9A 94801995-88 Front w/AT 24 1/4" C N68715 A9A 9479

Front w/MT 23 1/4" C M96308 A9A 94781987 Front 23 1/4" C M96308 A9A 9478PICKUP & KING CAB 1984-83 Front (From June of 1983) 22 7/8" C 41341 A12A 93871983-81 Front 23" C 132331 A12A 93801982-80 Front (From June of 1980) 25 1/4" C 132361 A12A 93861980-78 Front (From May of 1978) 25 " C 132354 A12A 93851977-75 Front 24" C 132437 A12A 9384XTERRA FRONT PROP SHAFT2001 Front w/6 Cyl. 25" C N68827 A12A 92912000 Front N68814 9290

OLDSMOBILEBRAVADA 2003-02 Front 4.2L Eng 18 7/8" W 15036981 A17 *93291999-95 Front 4WD Exc.3.42 & 3.73 Axle or HD Tow PackageType M 29 1/2" C 26038138 A17 93591998-95 Front AWD w/3.42 & 3.73 Axle or HD Tow PackageType N 24 15/16" B 26028429 A19 93641994-91 Front 24 1/4" C 26035154 A10 9356

TOYOTALANDCRUISER 2001-99 Front 23 " C 5859523000 92691998 Front w/6 Cyl. 58594 9851

Front w/8 Cyl. 23" C 5859523000 A12 92691997-91 Front 58594 A16 98511990-88 Front 55301 A16 9850

CODES: B Centerline of U-Joint located at the slip yoke end to centerline of the rear (furthest U-Joint) on the opposite end of prop shaft. Prop shaft must be collapsed. C Face of flange to face of flange. Shaft must be collapsed. Some applications have a flange on one end only. Measure face of flange to centerline of rear U-Joint. W Tube length only. Measure centerline of weld to centerline of opposite weld. * New Number. Limited core supply may restrict availability. Type See pages ?????

23

REMANUFACTURED DRIVE SHAFTS / PROP SHAFTS

Year Application Length Code OEM Type Part

TOYOTA (Cont'd)LANDCRUISER (Cont'd) 1987-85 Front w/AT (After 05/85) 55721 A16 9849

Front w/MT (After 05/85) 55833 A16 9848Front (Up to 04/85) 55834 A16 9847

1984-81 Front (Incl. FJ60) 18 5/8" C 5591818067 A16 98461983-75 Front (Exc. FJ55) 55076 A16 98444 RUNNER/PICKUP 2001 Front w/6 Cyl. AT 29" C A9A 92632000-99 Front w/4 Cyl. AT A9A 9261

Front Limited w/6 Cyl. AT 29" C A9A 9263Front SR5 w/6 Cyl. AT 5988124025 A9A 9259Front w/4 Cyl. MT 26 1/8" C A9A 9262Front w/6 Cyl. MT 25" C A9A 9260

1998-96 Front w/4 Cyl. AT A9A 9261Front w/4 Cyl. MT 26 1/8" C A9A 9262Front w/6 Cyl. AT 24 1/4" C 5988124025 A9A 9259Front w/6 Cyl. MT 25" C A9A 9260

1995-89 Front w/4 Cyl. AT 55266 9920Front w/6 Cyl. AT 55263 A16 9918Front w/4 Cyl. G Trans. (Start & Clutch Release Fork on Left) MT 55260 A16 9917Front w/4 Cyl. W Trans. (Start & Clutch Release Fork on Right) MT 55264 A16 9919

1988-87 Front w/4 Cyl. 55289 A16 9915Front w/6 Cyl. 55261 A16 9916

1986-84 Front 4WD Pickup 22" C 13905822000 A16 93761983-78 Front 4WD Pickup 18 5/8" C 13902518067 A16 93751977-76 Front 4WD Pickup 18 1/4" C 13902618025 A16 93741975-73 Front 4WD Pickup 18 1/4" C A16 9373PREVIA 1997-91

Front Shaft from eng. to power steering & A.C. systems. (This is an accessories driveshaft) 25 1/4" W 5817631 A31 9842

SEQUOIA 2001 Front 31 1/8" C A9A 9267T100 1998-95 Front w/6 Cyl. AT 37 1/4" C A4 9266

Front w/6 Cyl. MT 23 1/4" C A16 92681994-93 Front w/6 Cyl. AT 37 1/4" C A4 9266

Front w/6 Cyl. MT 9918TACOMA 2001-95 Front w/4 Cyl. AT 25 1/4" C A9A 9264

Front w/4 Cyl. MT A9A 9261Front w/6 Cyl. AT 25" C A9A 9265Front w/6 Cyl. MT 14 1/4" C 5988114025 A9A 9259

TUNDRA 2001-00 Front w/6 Cyl. AT 28" C A9A 9257

Front w/6 Cyl. MT 26 1/8" C A15 9258

CODES: B Centerline of U-Joint located at the slip yoke end to centerline of the rear (furthest U-Joint) on the opposite end of prop shaft. Prop shaft must be collapsed. C Face of flange to face of flange. Shaft must be collapsed. Some applications have a flange on one end only. Measure face of flange to centerline of rear U-Joint. * New Number. Limited core supply may restrict availability. Type See pages ?????

24

WARRANTY STATEMENTPOWER PLUS PRODUCTS’ 4x4 and SUV drive shafts carry a Limited LIfetime Warranty extended to the original owner of the vehicle in which the part was installed, with the exception of snow plows, landscaping vehicles, and heavy commercial / industrial use, which only carries a 12-Month Warranty. Limited Lifetime Warranty and 12-Month Warranty cover replacement of the defective part only.

CUSTOMER OBLIGATIONThe customer’s obligation is to fill out the Warranty Registration card and return to the place of purchase. To obtain a Warranty part, contact place of purchase for instructions and authorization of repairs and/or replacement.

LIMITATIONSThis Warranty does not cover the following: products installed on vehicles used for off-road competition purposes, damaged by abuse, accidents or improper installation. This Warranty is limited to replace-ment of the product and does not cover any other direct or indirect expense. This Warranty is given in lieu of all other expressed Warranties. No person or organization is authorized to alter this Warranty, either orally or in writing.

The determination as to whether or not the part is defective rests solely with POWER PLUS PRODUCTS and this determination is final. Some States do not allow exclusion or limitations or exclusions may not apply.

DISCLAIMERThe information contained in this catalogue has been gathered from reliable sources. While we believe it to be accurate and correct, we cannot assume responsibility for any possible error or omission, or harm resulting therefrom. If any error or omission is found in this catalogue, please notify us immediately so that we may correct it.

TO O R D E R - C A L L YO U R A R E A S A L E S R E P AT T H E TO L L F R E E N U M B E R L I S T E D B E LOW

VANCOUVER800.667.6388

CALGARY800.665.2196

EDMONTON877.837.1125

WINNIPEG800.665.2420

MISSISSAUGA800.268.2368

MONTREAL800.361.9018

HALIFAX800.473.5933

Pro-King Automotive Products - Division Of Transtar Industries955 Pantera Drive, Mississauga, Ontario L4w 2T4 Canada

ALSO IN STOCKCV AXLES • FRONT SHAFTS • REAR AXLE SHAFTS • DIFFERENTIAL COMPONENTS

Q U A L I T Y • P R E C I S I O N • D U R A B I L I T Y

02.28.2007


Recommended