5 – 11 Texas 50 Hz Pre-Engineered Submersible … 2 Turbine 50 Hz Goulds Water Technology FEATURES...

5" – 11" Texas 50 Hz Pre-Engineered Submersible Turbine PumpsFOR 6" AND LARGER WELLS

TECHNICAL BROCHUREB5-1150HZ

PAGE 2

Turbine 50 HzGoulds Water Technology

FEATURES

Discharge Bowl: Several discharge sizes available (NPT).

Discharge Bearing: Extra long sealed top bronze bearing insures shaft alignment and stabilization for extended life.

Intermediate Bowl: Class 30 cast iron. Glass coating on 6" and larger bowls for maximum efficiency and abrasion resistance.

Intermediate Bearings: Available in either no-lead bronze or rubber.

Impellers: Designed for maximum efficiency with a wide range hydraulic coverage. Made of low zinc and no lead material suitable for drinking water applications.

Taperlock: Accurately machined to ensure positive locking of the impeller to the pump shaft.

Upthrust Collar: Designed with extra margin of safety against momentary upthrust at start-up.

Suction Adapter: Designed to ensure proper pump/motor alignment. Open area permits easy access to pump/motor coupling. Casting made of ductile iron for increased strength.

Pump to Motor Coupling: Stainless steel coupling accurately machined for perfect alignment, balance and power transmission.

Pump Shaft: 100,000 PSI high tensile type 416 stainless steel provides strength and corrosion resistance. Ground and polished for smooth bearing surface.

Powered for Continuous Operation: All horsepower ratings are within the service limits of the motor and pump can be operated continuously without fear of damage to the motor.

PAGE 3


Performance based upon Mercury motors.Consult factory if using motor other than Mercury.

SPECIFICATIONS

Model Operating Range (m3/hr)

Best Efficiency Flow (m3/hr)

Horsepower Range

Discharge Connections

Minimum Well Size

5RWALC 6 - 22 17 5 - 20 3”, 4” 6”

5RWAHC 11 - 25 20 5 - 25 3”, 4” 6”

5CLC 13 - 33 23 5 - 25 3”, 4” 6”

5CHC 15 - 37 27 5 - 40 3”, 4” 6”

5TLC 19 - 41 33 5 - 30 3”, 4” 6”

5THC 22 - 56 46 5 - 50 3”, 4” 6”

6CLC 20 - 40 34 5 - 30 3”, 4” 6”

6CHC 24 - 60 46 7.5 - 50 3”, 4” 6”

7WAEL 16 - 46 38 5 - 30 4”, 5”, 6” 8”

7WALC 30 - 62 45 5 - 50 4”, 5”, 6” 8”

7WAHC 30 - 66 51 10 - 75 4”, 5”, 6” 8”

7CLC 40 - 95 75 7.5 - 75 4”, 5”, 6” 8”

7CHC 60 - 110 90 10 - 100 4”, 5”, 6” 8”

7TLC 56 - 130 105 7.5 - 75 4”, 5”, 6” 8”

7THC 75 - 160 130 10 - 100 4”, 5”, 6” 8”

8RJLC 40 - 110 90 7.5 - 75 4”, 5”, 6” 10”

8RJHC 75 - 165 120 10 - 100 4”, 5”, 6” 10”

8DHHC 210 -280 225 20 - 125 6" 10"

9RCLC 100 - 200 160 25 - 150 6”, 8” 10”

9RCHC 120 - 240 200 30 - 200 6”, 8” 10”

9TLC 150 - 320 250 25 - 175 6”, 8” 10”

9THC 200 - 350 285 30 - 200 6”, 8” 10”

11CLC 150 - 360 260 50 - 200 6”, 8” 12”

11CMC 170 - 420 300 75 - 300 6”, 8” 12”

11CHC 230 - 480 320 75 - 350 6”, 8” 12”

PAGE 4


11CH2860 RPM

50 HZ

6.8

FLOW (10 Cu. m/Hr)

HE

AD

PE

R S

TAG

E (m

)

.9 1.0 1.5 2.0 3 4 5 6 7 8 9 10 15 20 25 30 40 50

789

10

15

20

2530

40

50607080

11CM11CL

9RCH9RCL

9TH9TL7CH

8RJH

7TH7TL

7CL 8RJL

6CH6CL

5TH

5TL

5CL5CH

5RWH

5RWL

8DHHC

M 07 CHC 010 A 6 6 S

1st Character – “M” Designed for Mercury motor

2nd & 3rd Character – Nominal Bowl Size

4th, 5th & 6th Character – Pump Model

7th, 8th & 9th Character – Horsepower

10th Character – Different configuartion for the same HP motor

11th Character – Suction adapter/ Motor Size **

12th Character – Discharge Size

13th Character – Bearing Configurations

S = Sealed Top Bearing - with rubber intermediate bearings

B = Sealed Top Bearing - with bronze intermediate bearings

** “0” designates a 10” motor size.

** “2” designates a 12” motor size.

2860 RPM PERFORMANCE CHART

NOMENCLATURE DESCRIPTION

PAGE 5


................................................................................................................................................................

........................................

........................................

........................................

541⁄64"Effective

diameterwith

cableguard

4" NPT DISCHARGECONNECTION

W.E.

33⁄4"(4" MTR.)

51⁄2"(6" MTR.)

Model: 5RWALCO.D.: 144 mmRPM: 2860

Flow (m3/Hr)

Tota

l Hea

d (m

)

0

0

5RWAL-25 20 HP

40

80

120

160

200

240

280

320

360

4 8 12 16 20 24

0

10

20

30

40

50

60

70

80

90

Eff

icie

ncy

(%)

5RWAL-19 15 HP

5RWAL-13 10 HP

5RWAL-9 7.5 HP

5RWAL-6 5 HP

MODEL 5RWALC

Part Name Material Shaft ASTM A582 S41600

Coupling ASTM A582 S41600

Suction Adapter ASTM A536 Gr. 60-40-18

Suction Bearing ASTM B584 C89835

Impeller ASTM A744 CF8M

Taperlock ASTM A108 Gr. 1018

Intermediate Bowl ASTM A49 CI. 30B

Intermediate Bowl Bearing ASTM B584 C89835 (Std.)

Intermediate Bowl Bearing Rubber (optional)

Upthrust Collar Polyethylene

Discharge Bowl ASTM A48 CI. 30B

Discharge Bowl Bearing ASTM B584 C89835

Fasteners SAE J429 Gr. 8

Cable Guard ASTM A240 S30400

Suction Strainer ASTM A240 S30400

W.E. DIMENSIONS AND WEIGHTS

NOTES:

1. Length dimensions in mm and weights in kg.

2. Solid line is recommended operating range.

3. For intermediate horsepower pumps consult factory.

4. Please specify all options changes in W.E. order number.

MATERIALS OF CONSTRUCTION

HP Stages W.E. Order Number Length Weight

5 6M05RWL005A44B 900 50

M05RWL005A64B 956 52

7.5 9M05RWL007A44B 1205 67

M05RWL007A64B 1261 70

10 13 M05RWL010A64B 1769 93

15 19 M05RWL015A64B 2277 129

20 25 M05RWL020A64B 2886 164

PAGE 6


Model: 5RWAHCO.D.: 144 mmRPM: 2860

Flow (m3/Hr)

Tota

l Hea

d (m

)

0

0

5RWAH-22 25 HP

40

80

120

160

200

240

280

320

360

4 8 12 16 20 24

0

10

20

30

40

50

60

70

80

90

Eff

icie

ncy

(%)

5RWAH-18 20 HP

5RWAH-13 15 HP

5RWAH-9 10 HP

5RWAH-6 7.5 HP

28

5RWAH-4 5 HP

................................................................................................................................................................

........................................

........................................

........................................

541⁄64"Effective

diameterwith

cableguard


W.E.

33⁄4"(4" MTR.)

51⁄2"(6" MTR.)

MODEL 5RWAHC

















NOTES:







5 4M05RWH005A44B 687 38

M05RWH005A64B 753 40

7.5 6M05RWH007A44B 900 50

M05RWH007A64B 956 52

10 9 M05RWH010A64B 1261 70

15 13 M05RWH015A64B 1769 93

20 18 M05RWH020A64B 2175 123

25 22 M05RWH025A64B 2581 146

PAGE 7


Model: 5CLCO.D.: 144 mmRPM: 2860

Flow (m3/Hr)

Tota

l Hea

d (m

)

0

0

5CLC-22 25 HP

40

80

120

160

200

240

280

320

360

5 10 15 20 25 30

0

10

20

30

40

50

60

70

80

90

Eff

icie

ncy

(%)

5CLC-18 20 HP

5CLC-8 10 HP

5CLC-6 7.5 HP

35

5CLC-4 5 HP

40

5CLC-12 15 HP

................................................................................................................................................................

........................................

........................................

........................................

541⁄64"Effective

diameterwith

cableguard


W.E.

33⁄4"(4" MTR.)

51⁄2"(6" MTR.)

MODEL 5CLC

















NOTES:







5 4M05CLC005A44B 757 38

M05CLC005A64B 815 40

7.5 6M05CLC007A44B 993 56

M05CLC007A64B 1052 58

10 8 M05CLC010A64B 1287 64

15 12 M05CLC015A64B 1757 87

20 18 M05CLC020A64B 2463 123

25 22 M05CLC025A64B 2933 146

30 26 M05CLC030A64B 3404 170

PAGE 8


Model: 5CHCO.D.: 144 mmRPM: 2860

Flow (m3/Hr)

Tota

l Hea

d (m

)

0

0

5CHC-22 40 HP

40

80

120

160

200

240

280

320

360

5 10 15 20 25 30

0

10

20

30

40

50

60

70

80

90

Eff

icie

ncy

(%)

5CHC-17 30 HP

5CHC-8 15 HP

5CHC-7 10 HP

35

5CHC-4 7.5 HP

40

5CHC-14 25 HP

45

5CHC-11 20 HP

5CHC-3 5 HP

................................................................................................................................................................

........................................

........................................

........................................

541⁄64"Effective

diameterwith

cableguard


W.E.

33⁄4"(4" MTR.)

51⁄2"(6" MTR.)

MODEL 5CHC

















NOTES:







5 3M05CHC005A44B 458 32

M05CHC005A64B 697 34

7.5 4M05CHC007A44B 758 38

M05CHC007A64B 816 40

10 7 M05CHC010A64B 1170 64

15 8 M05CHC015A64B 1287 64

20 11 M05CHC020A64B 1639 81

25 14 M05CHC025A64B 1992 99

30 17 M05CHC030A64B 2345 117

40 22 M05CHC040A64B 2933 146

PAGE 9


Model: 5TLCO.D.: 144 mmRPM: 2860

Capacity (m3/Hr)

Tota

l Hea

d (m

)

0

0

5TLC-26 30 HP

40

80

120

160

200

240

280

320

360

5 10 15 20 25 30

0

10

20

30

40

50

60

70

80

90

Eff

icie

ncy

(%)

5TLC-21 25 HP

5TLC-8 10 HP

35

5TLC-6 7.5 HP

40

5TLC-17 20 HP

45

5TLC-12 15 HP

5TLC-4 5 HP

50

................................................................................................................................................................

........................................

........................................

........................................

541⁄64"Effective

diameterwith

cableguard


W.E.

33⁄4"(4" MTR.)

51⁄2"(6" MTR.)

MODEL 5TLC

















NOTES:







5 4M05TLC005A44B 776 38

M05TLC005A64B 835 40

7.5 6M05TLC007A44B 1020 56

M05TLC007A64B 1079 58

10 8 M05TLC010A64B 1324 64

15 12 M05TLC015A64B 1812 87

20 17 M05TLC020A64B 2424 117

25 21 M05TLC025A64B 2913 140

30 26 M05TLC030A64B 3525 170

PAGE 10


Model: 5THCO.D.: 144 mmRPM: 2860

Capacity (m3/Hr)

Tota

l Hea

d (m

)

0

0

5THC-24 50 HP

40

80

120

160

200

240

280

320

360

10 20 30

0

10

20

30

40

50

60

70

80

90

Eff

icie

ncy

(%)

5THC-19 40 HP

5THC-5 10 HP

5THC-3 7.5 HP

40

5THC-12 25 HP

5THC-10 20 HP

5THC-2 5 HP

50 60

5THC-7 15 HP

5THC-15 30 HP

................................................................................................................................................................

........................................

........................................

........................................

541⁄64"Effective

diameterwith

cableguard


W.E.

33⁄4"(4" MTR.)

51⁄2"(6" MTR.)

MODEL 5THC

















NOTES:







5 2M05THC005A44B 532 26

M05THC005A64B 591 28

7.5 3M05THC007A44B 654 38

M05THC007A64B 713 40

10 5 M05THC010A64B 958 46

15 7 M05THC015A64B 1203 58

20 10 M05THC020A64B 1570 75

25 12 M05THC025A64B 1814 87

30 15 M05THC030A64B 2181 105

40 19 M05THC040A64B 2671 129

50 24 M05THC050A64B 3283 158

PAGE 11



Capacity (m3/Hr)

Tota

l Hea

d (m

)

0

0

6CLC-15 30 HP

40

80

120

160

200

240

280

320

10 20 30

0

10

20

30

40

50

60

70

80

Eff

icie

ncy

(%)

6CLC-13 25 HP

6CLC-5 10 HP

6CLC-3 7.5 HP

40

6CLC-2 5 HP

50 60

6CLC-7 15 HP

6CLC-10 20 HP

................................................................................................................................................................

........................................

........................................

........................................

619/⁄64"Effective

diameterwith

cableguard


W.E.

33⁄4"(4" MTR.)

51⁄2"(6" MTR.)

MODEL 6CLC

















NOTES:







5 2M06CLC005A44B 507 31

M06CLC005A64B 561 33

7.5 3M06CLC007A44B 701 38

M06CLC007A64B 754 41

10 5 M06CLC010A64B 1015 56

15 7 M06CLC015A64B 1276 72

20 10 M06CLC020A64B 1666 95

25 13 M06CLC025A64B 2057 118

30 15 M06CLC030A64B 2318 134

PAGE 12



Capacity (m3/Hr)

Tota

l Hea

d (m

)

0

0

6CHC-15 50 HP

40

80

120

160

200

240

280

320

10 20 30

0

10

20

30

40

50

60

70

80

Eff

icie

ncy

(%)

6CHC-12 40 HP

6CHC-3 10 HP

40

6CHC-2 7.5 HP

50 60

6CHC-4 15 HP

6CHC-6 20 HP

360

70

90

6CHC-8 25 HP

6CHC-9 30 HP

................................................................................................................................................................

........................................

........................................

........................................

619⁄64"Effective

diameterwith

cableguard


W.E.

33⁄4"(4" MTR.)

51⁄2"(6" MTR.)

MODEL 6CHC

















NOTES:







7.5 2M06CHC007A44B 507 31

M06CHC007A64B 561 33

10 3 M06CHC010A64B 754 41

15 4 M06CHC015A64B 884 48

20 6 M06CHC020A64B 1145 64

25 8 M06CHC025A64B 1406 79

30 9 M06CHC030A64B 1536 87

40 12 M06CHC040A64B 1927 110

50 15 M06CHC050B64B 2318 134

PAGE 13


Model: 7WAELO.D.: 190.5 mmRPM: 2860

Capacity (m3/Hr)

Tota

l Hea

d (m

)

0

0

7WAEL-13 40 HP

40

80

120

160

200

240

280

320

10 20 30

0

10

20

30

40

50

60

70

80

Eff

icie

ncy

(%)

7WAEL-10 30 HP

7WAEL-3 7.5 HP

40

7WAEL-2 5 HP

5035

7WAEL-4 10 HP

7WAEL-5 15 HP

360

45

90

7WAEL-7 20 HP

7WAEL-8 25 HP

15 255

................................................................................................................................................................

........................................

........................................

........................................

7½"Effective

diameterwith

cableguard


W.E.

51⁄2"(6" MTR.)

733⁄64"(8" MTR.)

MODEL 7WAEL

















NOTES:







5 2 M07WAE000A66B 699 45

7.5 3 M07WAE007A66B 838 58

10 4 M07WAE010A66B 978 72

15 5 M07WAE015A66B 1118 85

20 7 M07WAE020A66B 1397 113

25 8 M07WAE025A66B 1537 126

30 10 M07WAE030A66B 1816 154

40 13 M07WAE040A66B 2235 194

PAGE 14


Model: 7WALCO.D.: 190.5 mmRPM: 2860

Capacity (m3/Hr)

Tota

l Hea

d (m

)

0

0

7WALC-10 50 HP

40

80

120

160

200

240

280

320

10 20 30

0

10

20

30

40

50

60

70

80

Eff

icie

ncy

(%)

7WALC-8 40 HP

7WALC-2 10 HP

40

7WALC-1 5 HP

50

7WALC-3 15 HP

7WALC-4 20 HP

360 90

7WALC-6 30 HP

60 70

7WALC-5 25 HP

................................................................................................................................................................

........................................

........................................

........................................

7½"Effective

diameterwith

cableguard


W.E.

51⁄2"(6" MTR.)

733⁄64"(8" MTR.)

MODEL 7WALC

















NOTES:







5 1 M07WAL005A66B 559 31

10 2 M07WAL010A66B 699 45

15 3 M07WAL015A66B 838 58

20 4 M07WAL020A66B 978 72

25 5 M07WAL025A66B 1118 85

30 6 M07WAL030A66B 1258 99

40 8 M07WAL040B66B 1537 126

50 10 M07WAL050A66B 1816 154

PAGE 15


Model: 7WAHCO.D.: 190.5 mmRPM: 2860

Capacity (m3/Hr)

Tota

l Hea

d (m

)

0

0

7WAHC-10 60 HP

40

80

120

160

200

240

280

320

10 20 30

0

10

20

30

40

50

60

70

80

Eff

icie

ncy

(%)

7WAHC-8 50 HP

7WAHC-2 10 HP

40

7WAHC-1 7.5 HP

50

7WAHC-3 20 HP

7WAHC-4 25 HP

360 90

60 70

7WAHC-5 30 HP

80

7WAHC-12 75 HP

7WAHC-6 40 HP

................................................................................................................................................................

........................................

........................................

........................................

7½"Effective

diameterwith

cableguard


W.E.

51⁄2"(6" MTR.)

733⁄64"(8" MTR.)

MODEL 7WAHC

















NOTES:







7.5 1 M07WAH007A66B 559 31

10 2 M07WAH010A66B 699 45

20 3 M07WAH020A66B 838 58

25 4 M07WAH025A66B 978 72

30 5 M07WAH030A66B 1118 85

40 6 M07WAH040A66B 1258 99

50 8 M07WAH050A66B 1537 126

60 10 M07WAH060A66B 1816 154

75 12 M07WAH050A86B 2138 187

PAGE 16


Model: 7CLCO.D.: 190.5 mmRPM: 2860

Capacity (m3/Hr)

Tota

l Hea

d (m

)

0

0

7CLC-9 60 HP

40

80

120

160

200

240

280

320

20

0

10

20

30

40

50

60

70

80

Eff

icie

ncy

(%)7CLC-8 50 HP

7CLC-2 15 HP

40

7CLC-1 7.5 HP

100

7CLC-3 20 HP

7CLC-4 25 HP

360 90

60

7CLC-5 30 HP

80

7CLC-6 40 HP

120

................................................................................................................................................................

........................................

........................................

........................................

7½"Effective

diameterwith

cableguard


W.E.

51⁄2"(6" MTR.)

733⁄64"(8" MTR.)

MODEL 7CLC

















NOTES:







7.5 1 M07CLC007A66B 581 34

15 2 M07CLC015A66B 743 47

20 3 M07CLC020A66B 906 60

25 4 M07CLC020A66B 1067 72

30 5 M07CLC030A66B 1230 85

40 6 M07CLC040A66B 1392 98

50 8 M07CLC050A66B 1716 132

60 9 M07CLC060A66B 1878 136

PAGE 17


Model: 7CHCO.D.: 190.5 mmRPM: 2860

Capacity (m3/Hr)

Tota

l Hea

d (m

)

0

0

7CHC-10 100 HP

40

80

120

160

200

240

280

320

25

0

10

20

30

40

50

60

70

80

Eff

icie

ncy

(%)

7CHC-7 75 HP

7CHC-2 20 HP

50

7CHC-1 10 HP

125

7CHC-3 30 HP

7CHC-4 40 HP

360 90

75

7CHC-5 50 HP

100

7CHC-6 60 HP

150

................................................................................................................................................................

........................................

........................................

........................................

7½"Effective

diameterwith

cableguard


W.E.

51⁄2"(6" MTR.)

733⁄64"(8" MTR.)

MODEL 7CHC

















NOTES:







10 1 M07CHC010A66B 581 34

20 2 M07CHC020A66B 743 47

30 3 M07CHC030A66B 906 60

40 4 M07CHC040A66B 1067 72

50 5 M07CHC050A66B 1230 85

60 6 M07CHC060A66B 1392 98

75 7 M07CHC075A86B 1759 132

100 10 M07CHC100A86B 1921 150

PAGE 18


Model: 7TLCO.D.: 190.5 mmRPM: 2860

Capacity (m3/Hr)

Tota

l Hea

d (m

)

0

0

40

80

120

160

200

240

280

320

20

0

10

20

30

40

50

60

70

80

Eff

icie

ncy

(%)

7TLC-11 75 HP

7TLC-2 15 HP

40

7TLC-1 7.5 HP

120

7TLC-5 30 HP

7TLC-6 40 HP

360 90

80

7TLC-7 50 HP

100

7TLC-9 60 HP

16060 140

7TLC-3 20 HP7TLC-4 25 HP

................................................................................................................................................................

........................................

........................................

........................................

7½"Effective

diameterwith

cableguard


W.E.

51⁄2"(6" MTR.)

733⁄64"(8" MTR.)

MODEL 7TLC

















NOTES:







7.5 1 M07TLC007A66B 590 35

15 2 M07TLC015A66B 770 50

20 3 M07TLC020A66B 950 64

25 4 M07TLC025A66B 1130 78

30 5 C07TLC030A66B 1310 92

40 6 C07TLC040A66B 1491 106

50 7 C07TLC050A66B 1671 120

60 9 C07TLC060A66B 2031 148

75 11 C07TLC075A86B 2435 182

PAGE 19


Model: 7THCO.D.: 190.5 mmRPM: 2860

Capacity (m3/Hr)

Tota

l Hea

d (m

)

0

0

25

50

75

100

125

150

175

200

20

0

10

20

30

40

50

60

70

80

Eff

icie

ncy

(%)

7THC-8 75 HP

7THC-2 20 HP

40

7THC-1 10 HP

120

7THC-4 40 HP

225

80

7THC-5 50 HP

100

7THC-6 60 HP

16060 140

7THC-3 30 HP

180

90

100250

7THC-10 100 HP

................................................................................................................................................................

........................................

........................................

........................................

7½"Effective

diameterwith

cableguard


W.E.

51⁄2"(6" MTR.)

733⁄64"(8" MTR.)

MODEL 7THC

















NOTES:







10 1 M07THC010A66B 590 35

20 2 M07THC020A66B 770 50

30 3 M07THC030A66B 950 64

40 4 M07THC040A66B 1130 78

50 5 M07THC050A66B 1310 92

60 6 M07THC060A66B 1491 106

75 8 M07THC075A86B 1810 154

100 10 M07THC100A86B 2171 182

PAGE 20


Model: 8RJLCO.D.: 200 mmRPM: 2860

Capacity (m3/Hr)

Tota

l Hea

d (m

)

0

0

40

80

120

160

200

240

280

320

360

30 60 90 120 150

0

10

20

30

40

50

60

70

80

90

Eff

icie

ncy

(%)

8RJLC-10 75 HP

8RJLC-4 30 HP

8RJLC-1 7.5 HP

8RJLC-2 15 HP

8RJLC-3 20 HP

8RJLC-6 40 HP

8RJLC-7 50 HP

8RJLC-8 60 HP

................................................................................................................................................................

........................................

........................................

........................................

77⁄8"Effective

diameterwith

cableguard


W.E.

51⁄2"(6" MTR.)

733⁄64"(8" MTR.)

MODEL 8RJLC





Impeller ASTM B584 C87610












NOTES:







7.5 1 M08JLC007A66B 584 41

15 2 M08JLC015A66B 750 56

20 3 M08JLC020A66B 915 72

30 4 M08JLC030A66B 1080 87

40 6 M08JLC040A66B 1410 118

50 7 M08JLC050A66B 1575 134

60 8 M08JLC060A66B 1783 155

75 10 M08JLC075A86B 2113 185

PAGE 21


Model: 8RJHCO.D.: 200 mmRPM: 2860

Capacity (m3/Hr)

Tota

l Hea

d (m

)

0

0

25

50

75

100

125

150

175

200

20

0

10

20

30

40

50

60

70

80

Eff

icie

ncy

(%)

8RJHC-7 75 HP

8RJHC-2 20 HP

40

8RJHC-1 10 HP

120

8RJHC-4 40 HP

225

80

8RJHC-5 50 HP

100

8RJHC-6 60 HP

16060 140

8RJHC-3 30 HP

180

90

100250 8RJHC-9 100 HP

................................................................................................................................................................

........................................

........................................

........................................

77⁄8"Effective

diameterwith

cableguard


W.E.

51⁄2"(6" MTR.)

733⁄64"(8" MTR.)

MODEL 8RJHC

















NOTES:







10 1 M08JHC010A66B 584 41

20 2 M08JHC020A66B 750 56

30 3 M08JHC030A66B 915 72

40 4 M08JHC040A66B 1080 87

50 5 M08JHC050A66B 1245 103

60 6 M08JHC060A66B 1410 118

75 7 M08JHC075A86B 1618 139

100 9 M08JHC100A86B 1948 170

PAGE 22


Model: 8DHHCO.D.: 200 mmRPM: 2860

Capacity (m3/Hr)

Tota

l Hea

d (m

)

0

0

20

40

60

80

100

120

140

160

40

0

10

20

30

40

50

60

70

80

Eff

icie

ncy

(%)

8DHHC-6 125 HP

8DHHC-1 20 HP

80 160

8DHHC-3 60 HP

180 90

8DHHC-4 75 HP

120 240200

8DHHC-2 40 HP

320280 400360

100200

8DHHC-5 100 HP

................................................................................................................................................................

........................................

........................................

........................................

77⁄8"Effective

diameterwith

cableguard


W.E.

51⁄2"(6" MTR.)

733⁄64"(8" MTR.)

MODEL 8DHHC

















NOTES:







20 1 M08DHC020A66B 607 56.8

40 2 M08DHC040A66B 795 72.3

60 3 M08DHC060A86B 1212 93.2

75 4 M08DHC075A86B 1400 108.6

100 5 M08DHC100A86B 1588 124.1

125 6 M08DHC125A86B 1773 139.5

PAGE 23


Model: 9RCLCO.D.: 200 mmRPM: 2860

Capacity (m3/Hr)

Tota

l Hea

d (m

)

0

0

40

80

120

160

200

240

280

320

360

20 6040 200 240

0

10

20

30

40

50

60

70

80

90

Eff

icie

ncy

(%)

9RCLC-6 150 HP

9RCLC-2 50 HP

9RCLC-1 25 HP

9RCLC-3 75 HP

9RCLC-5 125 HP

80 120100 160140 180 220

9RCLC-4 100 HP

................................................................................................................................................................

........................................

........................................

........................................

913⁄16"Effective

diameterwith

cableguard


W.E.

53⁄8"(6" MTR.)

733⁄64"(8" MTR.)

MODEL 9RCLC

















NOTES:







25 1 M09RCL025A66B 715 88

50 2 M09RCL050A66B 930 117

75 3 M09RCL075A86B 1099 152

100 4 M09RCL100A86B 1314 181

125 5 M09RCL125A86B 1530 210

150 6 M09RCL150A86B 1746 239

PAGE 24


Model: 9RCHCO.D.: 249 mmRPM: 2860

Capacity (m3/Hr)

Tota

l Hea

d (m

)

0

0

50

100

150

200

250

300

50 250 300

0

10

20

30

40

50

60

70

80

90

Eff

icie

ncy

(%)

9RCHC-6 200 HP

9RCHC-3 100 HP

9RCHC-4 125 HP

9RCHC-5 175 HP

100 150 200

9RCHC-4 150 HP

100

9RCHC-2 60 HP

9RCHC-1 30 HP

9RCHC-2 75 HP

................................................................................................................................................................

........................................

........................................

........................................

913⁄16"Effective

diameterwith

cableguard


W.E.

51⁄2"(6" MTR.)

733⁄64"(8" MTR.)

833⁄64"(10" MTR.)

MODEL 9RCHC

















NOTES:







30 1 M09RCH030A66B 715 88

60 2 M09RCH060A86B 883 123

75 2 M09RCH075A86B 883 123

100 3 M09RCH100A86B 1099 152

125 4 M09RCH125A86B 1314 181

150 4 M09RCH150A86B 1314 181

175 5 M09RCH175A06B 1530 210

200 6 M09RCH200A06B 1746 239

PAGE 25


................................................................................................................................................................

........................................

........................................

........................................

913⁄16"Effective

diameterwith

cableguard


W.E.

51⁄2"(6" MTR.)

733⁄64"(8" MTR.)

833⁄64"(10" MTR.)

Model: 9TLCO.D.: 249 mmRPM: 2850

Capacity (m3/Hr)

Tota

l Hea

d (m

)

0

0

50

100

150

200

250

300

50 250 300

0

10

20

30

40

50

60

70

80

90

Eff

icie

ncy

(%)

9TLC-7 175 HP

9TLC-4 100 HP

9TLC-6 150 HP

100 150 200

9TLC-5 125 HP

100

9TLC-2 50 HP

9TLC-1 25 HP

9TLC-3 75 HP

350 400

MODEL 9TLC

















NOTES:







40 1 C09TLC040A66B 734 91

60 2 C09TLC060A66B 969 123

75 2 C09TLC075A86B 921 128

100 3 C09TLC100A86B 1156 160

125 3 C09TLC125A86B 1156 160

150 4 C09TLC150A86B 1391 192

200 5 C09TLC200A06B 1626 224

PAGE 26


Model: 9THCO.D.: 249 mmRPM: 2850

Flow (m3/Hr)

Tota

l Hea

d (m

)

0

0

25

50

75

100

125

150

175

200

50

0

10

20

30

40

50

60

70

80

Eff

icie

ncy

(%)

9THC-6 200 HP

9THC-1 30 HP

200

9THC-3 100 HP

225

9THC-4 125 HP

100

9THC-5 150 HP

350300

9THC-2 60 HP

400

90

100250

150 250

................................................................................................................................................................

........................................

........................................

........................................

913⁄16"Effective

diameterwith

cableguard


W.E.

51⁄2"(6" MTR.)

733⁄64"(8" MTR.)

833⁄64"(10" MTR.)

MODEL 9THC

















NOTES:





5. 200 hp is 10” motor.



60 1 C09THC060A66B 734 91

100 2 C09THC100A86B 921 128

125 2 C09THC125A86B 921 128

150 3 C09THC150A86B 1156 160

200 4 C09THC200A06B 1391 192

PAGE 27



Flow (m3/Hr)

Tota

l Hea

d (m

)

0

0

40

80

120

160

200

240

280

320

360

100

0

10

20

30

40

50

60

70

80

90

Eff

icie

ncy

(%)

11CLC-4 200 HP

11CLC-2 100 HP

11CLC-1 50 HP

200 300 400 500

11CLC-3 150 HP

................................................................................................................................................................

........................................

........................................

........................................

11½"Effective

diameterwith

cableguard

6" OR 8" NPT DIS-CHARGE CONNECTION

W.E.

51⁄2"(6" MTR.)

733⁄64"(8" MTR.)

833⁄64"(10" MTR.)

MODEL 11CLC

















NOTES:





5. 200 hp is 10” motor.



50 1 C11CLC050A68B 718 130

100 2 C11CLC100A88B 969 174

150 3 C11CLC150A88B 1220 218

200 4 C11CLC200A08B 1471 262

PAGE 28


Model: 11CMCO.D.: 292 mmRPM: 2860

Flow (m3/Hr)

Tota

l Hea

d (m

)

0

0

40

80

120

160

200

240

280

320

360

100

0

10

20

30

40

50

60

70

80

90

Eff

icie

ncy

(%)

11CMC-4 300 HP

11CMC-2 150 HP

11CMC-1 75 HP

200 300 400 500

11CMC-3 250 HP

................................................................................................................................................................

........................................

........................................

........................................

11½"Effective

diameterwith

cableguard


W.E.

51⁄2"(6" MTR.)

733⁄64"(8" MTR.)

833⁄64"(10" MTR.)

MODEL 11CMC

















NOTES:





5. 250 hp and 300 hp are 12” motor.



75 1 C11CLC075A88B 718 130

150 2 C11CLC150A88B 969 174

250 3 C11CLC200A28B 1220 218

300 4 C11CLC300A28B 1471 262

PAGE 29


Flow (m3/Hr)

Tota

l Hea

d (m

)

0

0

40

80

120

160

200

240

280

320

360

100

0

10

20

30

40

50

60

70

80

90

Eff

icie

ncy

(%)

11CHC-4 350 HP

11CHC-2 175 HP

11CHC-1 75 HP

200 300 400 500

11CHC-3 250 HP

Flow (m3/Hr) NPSHR(M)250 7.3300 9.0350 11.0400 13.3


................................................................................................................................................................

........................................

........................................

........................................

11½"Effective

diameterwith

cableguard


W.E.

51⁄2"(6" MTR.)

733⁄64"(8" MTR.)

833⁄64"(10" MTR.)

MODEL 11CHC

















NOTES:





5. 200 hp is 10” motor amd 300 hp is 12” motor.



75 1 C11CLC075A88B 718 130

175 2 C11CLC150A08B 969 174

250 3 C11CLC200A28B 1220 218

350 4 C11CLC125A28B 1471 262

PAGE 30


NOTES

PAGE 31


NOTES

Xylem, Inc.P.O. Box 5487Lubbock, TX 79408Phone: (806) 763-7867 Fax: (800) 453-4749www.xyleminc.com/brands/gouldswatertechnology

Goulds is a registered trademark of Goulds Pumps, Inc. and is used under license. © 2012 Xylem Inc. B5-1150HZ June 2007

1) The tissue in plants that brings water upward from the roots;2) a leading global water technology company.

We’re 12,500 people unified in a common purpose: creating innovative solutionsto meet our world’s water needs. Developing new technologies that will improvethe way water is used, conserved, and re-used in the future is central to our work.We move, treat, analyze, and return water to the environment, and we help peopleuse water efficiently, in their homes, buildings, factories and farms. In more than150 countries, we have strong, long-standing relationships with customers whoknow us for our powerful combination of leading product brands and applicationsexpertise, backed by a legacy of innovation.

For more information on how Xylem can help you, go to www.xyleminc.com

Xylem

Date post:	27-May-2018
Category:	Documents
Upload:	nguyencong
View:	217 times
Download:	0 times

5 – 11 Texas 50 Hz Pre-Engineered Submersible … 2 Turbine 50 Hz Goulds Water Technology FEATURES...

Documents