1
MX-G3MS50 5 STACK MULTI STATION IMPORTANT SAFETY INFORMATION It is the sole responsibility of the purchaser of MATRIX Fitness Systems products to instruct all individuals, whether they are the end user or supervising personnel on proper usage of the equipment. It is the sole recommended that all users of MATRIX Fitness Systems exercise equipment be informed of the following information prior to its use. PROPER USAGE 1. Do not use any equipment in any way other than designed of intended by the manufacturer. It is imperative the sole recommended that all users of MATRIX Fitness Systems exercise equipment be informed MATRIX Fitness Systems equipment is used properly to avoid injury. 2. Keep hands and feet clear at all times from moving parts to avoid injury. CHECK FOR DAMAGE PARTS 1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by your country’s local MATRIX Fitness Systems dealer. 2. MANINTAIN LABELS AND NAMEPLATES: DO NOT remove labels for any reason. They contain important information. If un- readable or missing, contact your MATRIX Fitness Systems dealer for a replacement. 3. SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking of tipping over. A licensed contractor must be performed this, where application. 4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping your liability to a minimum. Equipment needs to be inspected at regular intervals. 5. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. MATRIX Fitness System dealers will provide service and maintenance training at our corporate facility upon request. Matrix Fitness Systems Corp. 1610 Landmark Drive Cottage Grove WI 53527 Toll Free 866.693.4863 www.matrixfitness.com Fax 608.839.8687 G3MS50 5-Stack Multi Station UNPACKING G3MS50 5-Stack Multi Station Thank you for purchasing a MATRIX Fitness product. Carefully unpack the unit from this box and dispose of the packing materials in accordance with your local laws. CAUTION The weight of the G3MS50 5-Stack Multi Station 1190lbs. (539.8kg) not including the weight stack. To avoid injury to yourself and prevent damage to the frame components, be sure to have proper assistance removing the frame pieces from this box. Step 1 Step 2 G3MS50 5-Stack Multi Station Step 4 Step 5 Step 6 TOOLS NEEDED DESCRIPTION SKETCH QUANTITY 3MM L-Shaped Allen Wrench 1 4MM L-Shaped Allen Wrench 1 5MM L-Shaped Allen Wrench 1 6MM L-Shaped Allen Wrench 1 8MM L-Shaped Allen Wrench 1 10MM L-Shaped Allen Wrench 1 Phillips Screwdriver 1 8MM Open-End Wrench 1 17MM Open-End Wrench 1 Guide Rod Lubrication 1 Hardware Bag If any items are missing please contact your country's local Matrix dealer for assistance. Frame Detail Accessory Detail Step 3 Lat Pull Adjustable Pully Z01 Z02 Item 4 Screw, Oval-Hex Socket (M10 X 95L) Flat Washer (M10) 8 Description Sketch Qty Nylon Nut (M10) Z04 4 Screw, Oval-Hex Socket (M12 X 25L) Flat Washer (M10) Lock Washer (M10) Z05 Z07 Z06 2 2 2 Rubber Stack Cushions Z13 Nylon Nut (M6) Screw, Oval-Hex Socket (M6 X 45L) Z11 Z12 2 2 2 Nylon nut F05 F04 Cable 7 1 Allen Head Cap Screw (M8 X 30L) Z08 2 Sticke, Weight Stack Plate V03 1 Pully (115mm) F01 5 Pully (90mm) F02 2 F03 Bolt 7 Adjustable Pully RIGHT Adjustable Pully LEFT Low Row Tricep Lat Pull Z10 Item 8 Nylon Nut (M10) Description Sketch Qty Z12 Flat Washer (M10) 16 Z14 Screw (M10 X 80L) 4 Screw,Oval-Hex Socket (M8 X 25L) Z16 Z15 Screw (M10 X 25L) 16 4 Flat Washer (M8) Lock Washer (M8) Z17 Z18 4 4 Arc-flat Washer Z22 4 Z15 Z12 Z14 Z10 Z16 Z18 Z17 Z09 Z16 Z16 Z12 Z10 Z12 Z22 Z12 Screw (M6 X 20L) Z20 Z19 Item Description Sketch 32 24 Qty Rubber Tip Weight Shield Bolt Z21 24 Rubber Shield Spacer PART # MH0204528B Z21 Z20 Z20 Z20 Z21 Z21 Z20 Z21 Z20 Z21 Z20 Rear Shield Front Shield Front Shield Z21 Z20 Z21 Z21 Z21 Z21 Z20 Z20 Z21 Z20 Z20 Z21 Z21 Z20 Z20 Z21 Z21 Z20 Z20 Z21 Z21 Z21 Z21 Z21 Z21 Z19 NOTE: Before attaching weight plate decals be sure to verify the head plate is positioned on the weight stack so that the bolt attaching the pull pin to the head plate is positioned behind the chrome adjustment tube. Z17 Screw,Oval-Hex Socket (M10 X 25L) Arc-flat Washer Z18 Nylon Nut (M10) Screw,Oval-Hex Socket (M10 X 80L) Description Sketch Flat Washer (M10) Screw,Oval-Hex Socket (M10 X 90L) Item Z07 Z08 Z05 Z04 2 2 Qty 36 2 18 16 Screw (M12 X 25L) Flat Washer (M12) Lock Washer (M12) Z10 Z11 Z12 2 2 2 Screw,Oval-Hex Socket (M10 X 25L) Z15 3 Rubber Stack Cushions Z16 Nylon Nut (M6) Screw,Oval-Hex Socket (M6 X 45L) Z13 Z14 2 2 2 F23 F22 Nylon nut Bolt 7 7 V03 Sticker, Weight Stack Plate 1 F06 Pully 7 F08 Cable 1 Z16 Z13 Z14 Guide Sleeve F08 N13 Z04 Z05 Z05 Z08 Z07 Z05 Z05 Z18 Z17 Z04 Z05 Z07 Z10 Z12 Z11 Z15 V03 F06 F23 F22 F06 F22 F23 F06 F23 F22 F22 F06 F23 Tricep Flat Washer (M10) Screw, Oval-Hex Socket (M10 X 90L) Item Z09 Z07 Z10 Description Nylon Nut (M10) 16 8 8 Qty Sketch Screw, Oval-Hex Socket(M10 X 25L) Z02 4 Rubber Stack Cushions Screw, Oval-Hex Socket(M6 X 45L) Z05 Z11 Z06 Nylon Nut (M6) 2 2 2 Sticker, Weight Stack Plate V02 1 Pully F06 1 Cable F08 1 Bolt F22 2 F40 Z05 Z06 F08 Guide Sleeve V04 V04 Z09 Z10 Z07 Z02 Z11 V02 Z01 F23 F06 F22 Z07 F23 F06 F22 Guide Rod Selector Pin Top Weight Guide Sleeve Nylon Nut (M6) F23 2 Screw (M8 x 30L) F01 2 Low Row Nylon Nut (M10) Screw (M10 X 80L) Arc-flat Washer Screw, Oval-Hex Socket (M10 X 25L) Flat Washer (M10) Description Sketch Nylon Nut (M8) Screw, Oval-Hex Socket (M8 X 70L) Z11 Z13 Z16 Item Z08 Z09 Z10 Z07 4 Spring Washer (M10) Z12 4 2 2 Qty 2 2 2 2 Screw, Oval-Hex Socket (M10 X 25L) Z02 4 Rubber Stack Cushions Z14 Nylon Nut (M6) Screw (M6 X 45L) Z05 Z06 2 2 2 9 9 Nylon Nut F23 F22 Bolt Flat Washer (M8) K18 2 T24 T23 T22 Z02 Z13 Z14 Z14 Handlebar Holder Hooker Z12 k18 Z13 Z07 Z08 Z09 Z11 Z11 Z10 Z16 V03 F07 F05 F23 F22 F23 F05 F22 F23 F05 F22 F23 F22 F05 F05 F23 F22 F05 F04 F03 F02 F03 F02 F04 F03 F04 F01 F02 F04 F03 F01 F03 F04 F04 F01 F01 F03 V03 Z12 Z11 Z13 Z05 Z07 Z06 Z07 Z06 Z05 Z01 Z04 Z02 Z08 H12 H27 H26 H12 F04 F02 F03 F04 F02 F03 F01 F03 F04 F02 F03 F04
