Principle of Operation:
The 5-valve roddable manifold features two isolation valves, two equalizer valves and a vent valve in a single body forisolation and calibration of differential pressure transmitters. The RADIAL PATTERN™ manifold has an innovative angled bonnet configuration for easy operation. Additional features of the manifold include a body manufactured from extruded solid bar, robust stems and Parker’s innovative design which ensures a bubble tight seal in a variety of conditions.
5 Valve Gas ManifoldsP6M5S™ and P6MA5S™
Gas Style ManifoldUS Patent No: US 7,225,832 B2
Features and Benefits:
• Hydrotested at 150% of rated pressure (shell test). Nitrogen gas tested to 2000 psi. Complies with ASME B31.1 & B31.3 shell testing procedures as standard. Ensures structural integrity of valve.
• Seat tightness (zero leakage) verified to 110% of rated pressure. Nitrogen gas tested to 2000 psi. Complies with ASME B31.1 & B31.3 seat testing procedures as standard. Ensures zero leakage at seats for proper calibration.
• Packing below stem thread Prevents corrosion of critical stem threads
• Metal body-to-bonnet seals are in compression, not tension Mitigates risk of stress cracking
• Stem threads are rolled, not cut Higher quality stem for longer service life
• Non-rotating tapered tip stem (3/8” bore only) Extended soft seat like and a reliable soft seat shut off
• 8 RMS stem finish Extended packing life
• V-Style PTFE packing 30-40% less operational torque and less frequent packing adjustments than traditional PTFE packed valves
• Pressure component materials sourced from the US, Canada or Europe Reliable material traceability. MTR’s provided with every order for pressure containing components.
Parker Hannifin acquired PGI in 2012 and Phoenix Precision Ltd in 2014. The enclosed offering combines the best product features of the acquisitions and is the best available, safest technology to better serve customers.
2P6M5S™ and P6MA5S™, 5 Valve Gas Manifold • PPL-CAT_P6M(A)5S-001 04/17
P6M5S™ and P6MA5S™: Technical Specifications
Specifications:
Feature DescriptionType: P6M5S FxF Manifold, Roddable Pattern
Rating: Up to 6000 psi @ 100ºF (41370 kPa @ 38°C)Stem: Non-Rotating Taper Tip and Flat Tip
Packing: FKM O-ring, or PTFESeat: Delrin™, Peek™ or Tefzel™ (for blocks)
Handle: RemovableBore Size: 3/8" (Primary), 1/8" (EQ., Bleed)
Inlet Connections: 4 Bolt FlangeOutlet Connections: 4 Bolt Flange
Bonnet Lock: Pin or PlateBody Stock: 3.625" x 4.0" x 1.7" x 2.4"
Weight: 7.6 - 7.8 lbs.Special Service: O2 or CL cleaning available*
Notes: *Other specifications or services may be available.
P6M5S Straight Configurations
Specifications:
Feature Description
Type: P6MA5S Angle FxF Manifold, Roddable Pattern
Rating: Up to 6000 psi @ 100ºF (41370 kPa @ 38°C)Stem: Non-Rotating Taper Tip and Flat Tip
Packing: FKM O-ring, or PTFESeat: Delrin™, Peek™ or Tefzel™ (for blocks)
Handle: RemovableBore Size: 3/8" (Primary), 1/8" (EQ., Bleed)
Inlet Connections: 4 Bolt FlangeOutlet Connections: 4 Bolt Flange
Bonnet Lock: Pin or PlateBody Stock: 3.625" x 4.0" x 2.4"
Weight: 9.4 - 9.6 lbs.Special Service: O2 or CL cleaning available*
Notes: *Other specifications or services may be available.
P6MA5S 90º Angle Configurations
4.0”
10.4”- 10.8”(Open)
3.5”- 3.9”(Open)
BLO
CK
BLO
CK BLE
ED
2.125” 2.40”
Block valvebonnet
removed
EQ.
2 Test ports
2 Mounting holesfor 1/4” UNF bolts
1.0” spacing
Removed EQbonnet for clarity
Ventport
4.0”
10.4”- 10.8”(Open)
3.5”- 3.9”(Open)
BLO
CK
BLO
CK
BLE
ED
2.125” 2.40”
EQ.
2 Test ports
4 Mounting holesfor 7/16” UNF bolts
EQ. valvebonnet
removed
2.125”BOTTOM VIEW
(Inlet Flange Layout)
Vent port
1.625”
3.625”
Removed EQbonnet for clarity
Rod outport
Drain port
3P6M5S™ and P6MA5S™, 5 Valve Gas Manifold • PPL-CAT_P6M(A)5S-001 04/17
P6M5S™ and P6MA5S™: Bonnet Assembly, Stem and Seat, Flow Diagram
3/8” Bore O-Ring and Packed Bonnet Assembly
Removable Handle
Dust Cover
Bonnet (Lock Pin Not Shown)
Dual O-Ring SealBack Seat (Insert)
Soft Seat
Removable HandleDust Cover
“V” Type Teflon Packing (3 pcs.)
Back Seat
Bore O-Ring Packed Bonnet
Non-Rotating Taper Tip Stem
Locking Adjuster
Soft Seat
Non-Rotating Taper Tip Stem
Bonnet (Lock Pin Not Shown)
Stem and Seat Configurations
3/8” BoreNon-rotating O-ring
for Block
3/8” BoreNon-rotating Packed
for Block
1/8” BoreO-ring
for Equalize or Bleed
1/8” BorePacked
for Equalize or Bleed
Flow Diagram for All Manifolds
Pressure Core
INST
PR
OC BLOCK
BLEED
INST
PR
OCBLOCK
EQ. EQ.TEST TEST
RODPORT
RODPORT
DRAIN DRAIN
4P6M5S™ and P6MA5S™, 5 Valve Gas Manifold • PPL-CAT_P6M(A)5S-001 04/17
P6M5S™ and P6MA5S™: Pressure-Core® Seal - Advanced Stem Seal System
A Superior Design for Better Performance:
Parker’s patented Pressure-Core® Stem Seal System was tested by an independent laboratory in accordance with EPA Method 21, and the results indicate that the Pressure-Core® Stem Seal is a reliable, affordable, virtually leak-free bonnet requiring no costly, time consuming maintenance.
After years of field experience and millions of valves in service, Parker takes great pride in extending a five-year limited warranty on our Pressure-Core® Stem Seal, far exceeding the industry standard.
Product Features:
• Virtually Leak-Free Performance • No Adjustments or Maintenance Requirements • Unmatched 5 Year Warranty • No Fugitive Emissions
Fugitive Emissions Test Results:
See for yourself how our Pressure-Core® not only outperforms the competition, but sets a new industry standard...
Test ProcedureValves mechanically cycled 50 times (full open to full close) at 1,000 PSI methane, then heated to 400°F and air cooled to ambient. Procedure repeated until failure.
Failure Criteria100 PPM leak**Competition’s Emission Seal Warranty
Test Results: Parker: The Pressure-Core Seal successfully completed 694 mechanical cycles and 13 thermal cycles. Maximum leakage throughout testing was 40 PPM.
Competition: The competition’s “low emissions” graphite design failed on the 89th mechanical cycle and on average every 125 cycles throughout the testing.
Repeated maintenance was required between each failure to readjust the valve packing.
Competition
13 Thermal Cycles
13 Thermal CyclesFAILURES
FAILURE
FAILURE
FAILURE
700
600
500
400
300
200
100
0
Mec
hani
cal C
ycle
s
PEEK®
Backup Ring
FKM Core
Body Pressure
Stem Bonnet
VirginPTFE
316SSSeal Retainer
5P6M5S™ and P6MA5S™, 5 Valve Gas Manifold • PPL-CAT_P6M(A)5S-001 04/17
Meets the Following Specifications:
• ASME B31.1 Power Piping
• ASME B31.3 Process Piping
• ASME B16.34 Valves - Flanged, Thread, and Welding End
• API 598 Valve Inspection and Testing
• MSS SP-25 Standard Marking Systems for Valves, Fittings, and Flange Unions
• MSS SP-99 Instrument Valves
• MSS SP-105 Instrument Valves for Code Applications
• NACE MR0175 for all 316SS valves and A105CS body/316SS bonnet (SC Material Code)
Code Description Min. Temperature Max. Temperature
A Aflas™ 15ºF (-10ºC) 400ºF (204ºC)
V FKM -20ºF (-29ºC) 400ºF (204ºC)
P Pressure Core -40ºF (-40ºC) 450ºF (232ºC)
T PTFE -65ºF (-54ºC) 450ºF (232ºC)
D Delrin™ -40ºF (-40ºC) 200ºF (93ºC)
P Peek™ -40ºF (-40ºC) 400ºF (204ºC)
Z Tefzel™ -300ºF (-185ºC) 300ºF (150ºC)
Seal and Seat Temperature Rating:
P6M5S™ and P6MA5S™: Other Technical Information
Manifold Applications
Note: Packing material ratings based on manufacturer’s specifications. Approximations only. Parker does not represent these values as finite.
They are provided only as representative values.
Pressure vs. Temperature
Code SS SC CS
Body ASTM A182 316SS ASTM A105 CS ASTM A108 CS
Bonnet ASTM A182 316SS ASTM A182 316SS ASTM A108 CS
Stem ASTM A182 316SS ASTM A182 316SS ASTM A582 303SS
Adjuster ASTM A582 303SS ASTM A582 303SS ASTM A108 CS
Insert ASTM A182 316SS ASTM A182 316SS ASTM A108 CS
Handle ASTM A582 303SS ASTM A582 303SS ASTM A108 CS
Material of Construction:
6P6M5S™ and P6MA5S™, 5 Valve Gas Manifold • PPL-CAT_P6M(A)5S-001 04/17
P6M5S™ and P6MA5S™: Model Numbering System
BOLT OPTIONS BOLT MATERIAL DESIGNATION
Application Description Length CS 304 SS 316 SS
DP Transmitter
Bi-planar Design: Rosemount™ 1151, Honeywell™ 900 etc. 1”Blank: Standard for CS Manifolds
Blank: Standard for SS Manifolds
-S6
Coplanar Design: Rosemount™ 3051, 3095, 2024 with coplanar flange. 2 1/2”Blank: Standard for CS Manifolds
Blank: Standard for CS Manifolds
-225S6
Flow Computer
ABB Total Flow, Thermo Fisher™ (with Honeywell™ Transducer Module), Barton Scanner, Bristol Teleflow & TeleTrans
1”Blank: Standard for CS Manifolds
Blank: Standard for SS Manifolds
-S6
Fisher™, Flow Automation™ (with Rosemount™ Transducer module), Daniel, Dynamic Fluid
2 1/2”Blank: Standard for CS Manifolds
Blank: Standard for CS Manifolds
-225S6
DP Transmitter with DP to GP Adapter
DP Bi-planar design used in combination with DP to GP Adapter (DPG6S) 2” -200CS -200S4 -200S6
DP Coplanar design used in combination with DP to GP Adapter (DPG6S) 3 1/4” -325CS 325S4 -325S6
Parker Orifice Size Type Inlet Size Inlet Type Outlet Size Outlet Type Material Packing Seat Stem Tip
P 6=3/8” M5S FL=Flange FL=FlangeSS=ASTM A182
316/316LA=Aflas™ D=Delrin™ DL=Dielectric
MA5SSC=ASTM A105 CS*
V=FKM P=Peek™OR= FKM
O-ring Flange Seal
CS=ASTM A108 CS*
T=PTFE Z=Tefzel™**
P=Pressure Core
EXAMPLE: P6MA5SFLDLSSVD = 3/8” Orifice, Angle Manifol, Flange Inlet, Flange Outlet, 316SS Body, FKM Packing, Delrin™ Seats, Non-rotating Tapered Tip Stem on Blocks, Flat Tip Stem on Bleed and EQs
P 6 MA5S FL FL SS V D
*For code applications, A108 CS is unacceptable, A105 CS must be selected for CS valves.**For block bonnet only.Note: Standard Bolting Options: 1. CS - carbon steel, Gr.8, zinc plated bolts; SS - stainless steel, 18.8 (304SS) bolts. 2. All manifolds are supplied with both 1” lg. and 2-1/2” lg. bolts. 3. Manifolds with dielectric option are supplied with 1-1/4” lg. and 2-1/2” lg. bolts.
7P6M5S™ and P6MA5S™, 5 Valve Gas Manifold • PPL-CAT_P6M(A)5S-001 04/17
Parker’s Motion & Control TechnologiesAt Parker, we’re guided by a relentless drive to help our customers become more productive and achieve higher levels of profitability by engineering
the best systems for their requirements. It means looking at customer applications from many angles to find new ways to create value. Whatever
the motion and control technology need, Parker has the experience, breadth of product and global reach to consistently deliver. No company knows
more about motion and control technology than Parker. For further information call 1-800-C-Parker.
MARKET KEY MARKETS KEY PRODUCTS
AEROSPACE
Aircraft Engines Commercial Commerical TransportsMilitary AircraftRegional Transports
Business and General AviationLand-Based Weapons SystemsMissiles and Launch VehiclesUnmanned Aerial Vehicles
Flight Control Systems & ComponentsFluid Conveyance SystemsFluid Metering Delivery & Atomization DevicesFuel Systems & Components
Hydraulic Systems & ComponentsInert Nitrogen Generating SystemsPneumatic Systems & ComponentsWheels & Brakes
CLIMATE CONTROL
AgricultureFood, Beverage and DairyPrecision CoolingTransportation
Air ConditioningLife Sciences & MedicalProcessing
Co2 ControlsElectronic ControllersFilter DriersHand Shut-Off ValvesHose & Fittings
Pressure Regulating ValvesRefrigerant DistributorsSafety Relief ValvesSolenoid ValvesThermostatic Expansion Valves
ELECTRO- MECHANICAL
AerospaceLife Science & MedicalPackaging MachineryPlastics Machinery & ConvertingSemiconductor & ElectronicsFactory Automation
Machine ToolsPaper MachineryPrimary MetalsTextileWire & Cable
AC/DC Drives & SystemsElectric Actuators, Gantry Robots & Slides Electrohydrostatic Actuation SystemsElectromechanical Actuation SystemsHuman Machine Interface
Linear MotorsStepper Motors, Servo Motors Drives & ControlsStructural Extrusions
FILTRATION
Food & BeverageLife SciencesMobile EquipmentPower GenerationTransportation
Industrial MachineryMarineOil & GasProcess
Analytical Gas GeneratorsCompressed Air & Gas FiltersCondition MonitoringEngine Air, Fuel & Oil Filtration & Systems
Hydraulic, Lubrication & Coolant FiltersProcess, Chemical, Water Microfiltration FiltersNitrogen, Hydrogen & Zero Air Generators
FLUID and GAS HANDLING
AerospaceAgricultureBulk Chemical HandlingConstruction MachineryFood & BeverageFuel & Gas Delivery
Industrial MachineryMobileOil & GasTransportationWelding
Brass Fittings & ValvesDiagnostic Equipment Fluid Conveyance SystemsIndustrial Hose
PTFE & PFA Hose, Tubing & Plastic FittingsRubber & Thermoplastic Hose & CouplingsTube Fittings & AdaptersQuick Disconnects
HYDRAULICS
AerospaceAerial liftAgricultureConstruction MachineryForestry
Industrial MachineryMiningOil & GasPower Generation & EnergyTruck Hydraulics
Diagnostic EquipmentHydraulic Cylinders & AccumulatorsHydraulic Motors & PumpsHydraulic SystemsHydraulic Valves & Controls
Power Take-Offs Rubber & Thermoplastic Hose & CouplingsTube Fittings & AdaptersQuick Disconnects
PNEUMATICS
AerospaceConveyor & Material HandlingFactory AutomationLife Science & Medical
Machine ToolsPackaging MachineryTransportation & Automotive
Air PreparationBrass Fittings & ValvesManifoldsPneumatic AccessoriesPneumatic Actuators & GrippersPneumatic Valves & Controls
Quick DisconnectsRotary ActuatorsRubber & Thermoplastic Hose & CouplingsStructural ExtrusionsThermoplastic Tubing & FittingsVacuum Generators, Cups & Sensors
PROCESS CONTROL
Chemical & RefiningFood, Beverage & DairyMedical & Dental
MicroelectronicsOil & GasPower Generation
Analytical Sample Conditioning Products & SystemsFluoropolymer Chemical Delivery Fittings, Valves & PumpsHigh Purity Gas Delivery Fittings, & Valves & Regulators
Instrumentation Fittings, Valves RegulatorsMedium Pressure Fittings & ValvesProcess Control Manifolds
SEALING and SHIELDING
AerospaceChemical ProcessingConsumerEnergy, Oil & GasFluid PowerGeneral Industrial
Information TechnologyLife SciencesMilitarySemiconductorTransportation
Dynamic SealsElastomeric O-Rings Emi ShieldingExtruded & Precision-Cut, Fabricated Elastomeric Seals
Homogeneous & Inserted Elastomeric Shapes High Temperature Metal SealsMetal & Plastic Retained Composite SealsThermal Management
PPL-CAT_P6M(A)5S-001 April2017
Parker Hannifin CorporationInstrumentation Products Division16101 Vallen DriveHouston, TX 77041 USAPhone:(713) 466-0056 • Fax: (713) [email protected] | www.parker.com • www.pgiint.com
© 2017 by Parker Hannifin Corporation. All rights reserved. Material in this brochure or catalogue may not be reproduced in whole or in part, in any form, without written permission from the publisher.
PEEK is a registered TM of Whitford Wordwide Company and Whitford B.V. KEL-F is a registered TM of M.W. Kellogg Company. GRAFOIL is a registered TM of High Temperature Materials Inc. and Graftech INC. Corporation. AFLAS is a registered TM of Asahi Glass Co. Ltd. Corporation Japan. MONEL and INCONEL are registered TMs of Huntington Alloys Corporation. HASTELLOY is a registered TM of Haynes International, Inc.
Parker provides the information herein in good faith but makes no representation as to its comprehensiveness or accuracy. The information contained herein is intended only as a guide to its products and services. Individuals using information must exercise indepen-dent judgment in evaluating product selection and determining product appropriateness for their particular purpose and system requirements. PARKER MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED,INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE INFORMATION SET FORTH HEREIN OR THE PRODUCT(S) TO WHICH THE INFORMATION REFERS. ACCORDINGLY, PARKER WILL NOT BE RESPONSIBLE FOR DAMAGES (OF ANY KIND OR NATURE, INCLUDING INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES) RESULTING FROM THE USE OF OR RELIANCE UPON THIS INFORMATION. Patents and Patents Pending in the U.S. and foreign countries. Parker reserves the right to change product designs and specifications without notice.
Distributor / Representative:
! CAUTION ! Do not mix or interchange component parts or tubing with those of other manufacturers. Doing so is unsafe and will void warranty.
Parker Autoclave Engineers Valves, Fittings, and Tools are not designed to interface with common commercial instrument tubing and are designed to only connect with tubing manufactured to Parker Autoclave Engineers AES specifications. Failure to do so is unsafe and will void warranty.
Offer of SaleThe items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be
governed by the provisions stated in Parker's standard terms and conditions of sale (copy available upon request).
Parker Worldwide
AE – UAE, DubaiTel: +971 4 [email protected]
AR – Argentina, Buenos AiresTel: +54 3327 44 [email protected]
AT – Austria, Wiener NeustadtTel: +43 (0)2622 [email protected]
AT – Eastern Europe, Wiener NeustadtTel: +43 (0)2622 23501 [email protected]
AU – Australia, DandenongTel: +61 (0)3 9768 [email protected]
AZ – Azerbaijan, BakuTel: +994 50 2233 [email protected]
BE/LX – Belgium, NivellesTel: +32 (0)67 280 [email protected]
BR – Brazil, Sao Jose dos CamposTel: +55 12 4009 [email protected]
BY – Belarus, MinskTel: +375 17 209 [email protected]
CA – Canada, Grimsby, Ontario Tel +1 [email protected]
CH – Switzerland, EtoyTel: +41 (0) 21 821 02 [email protected]
CL – Chile, SantiagoTel: +56 (0) 2 2303 [email protected]
CN – China, ShanghaiTel: +86 21 2899 [email protected]
CZ – Czech Republic, KlecanyTel: +420 284 083 [email protected]
DE – Germany, KaarstTel: +49 (0)2131 4016 [email protected]
DK – Denmark, BallerupTel: +45 43 56 04 [email protected]
ES – Spain, MadridTel: +34 902 33 00 [email protected]
FI – Finland, VantaaTel: +358 (0)20 753 [email protected]
FR – France, Contamine s/ArveTel: +33 (0)4 50 25 80 [email protected]
GR – Greece, AthensTel: +30 210 933 [email protected]
HU – Hungary, BudapestTel: +36 1 220 [email protected]
ID – Indonesia, TangerangTel: +62 (0)21 7588 [email protected]
IE – Ireland, DublinTel: +353 (0)1 466 [email protected]
IN – India, MumbaiTel: +91 22 6513 7081-85
IT – Italy, Corsico (Ml)Tel: +39 02 45 19 [email protected]
JP – Japan, TokyoTel: +(81) 3 6408 [email protected]
KR – South Korea, SeoulTel: +82 2 559 [email protected]
KZ – Kazakhstan, AlmatyTel: +7 7272 505 [email protected]
LV – Latvia, RigaTel: +371 6 745 [email protected]
MX – Mexico, TolucaTel: +52 722 275 [email protected]
MY – Malaysia, SelangorTel: +603 784 90 [email protected]
NL – The Netherlands, OldenzaalTel: +31 (0)541 585 [email protected]
NO – Norway, StavangerTel: +47 (0)51 826 [email protected]
NZ – New Zealand, Mt WellingtonTel: +64 9 574 1744
PL – Poland, WarsawTel: +48 (0)22 573 24 [email protected]
PT – Portugal, Leca da PalmeiraTel: +351 22 999 [email protected]
RO – Romania, BucharestTel: +40 21 252 [email protected]
RU – Russia, MoscowTel: +7 495 [email protected]
SE – Sweden, SpångaTel: +46 (0)8 59 79 50 [email protected]
SG – Singapore,Tel: +65 6887 [email protected]
SK – Slovakia, Banská BystricaTel: +421 484 162 [email protected]
SL – Slovenia, Novo MestoTel: +386 7 337 [email protected]
TH – Thailand, BangkokTel: +66 2 186 [email protected]
TR – Turkey, IstanbulTel: +90 216 [email protected]
TW – Taiwan, TaipeiTel: +886 2 2298 [email protected]
UA – Ukraine, KievTel: +380 44 494 [email protected]
UK – United Kingdom, WarwickTel: +44 (0)1926 [email protected]
USA – IPD, HuntsvilleTel: +1 256 881 [email protected]
USA – Autoclave Engineers, ErieTel: +1 814 860 [email protected]
VN – Vietnam, Hochi Minh City Tel: +84 (0)8337 546 [email protected]
ZA – South Africa, Kempton ParkTel: +27 (0)11 961 [email protected]
WARNING FAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH,
PERSONAL INJURY AND PROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The prod-
ucts described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.