4
The N2-16 is the smallest and has a collet clamping range from 2 to 12 mm; the N2-20 is the intermediate machine, with a clamping range of up to 16 mm; the N2-26 is the largest model of the series and can accommodate diameters of up to 22 mm in the collet. All machines can be supplied with a base, with a base and an exhaust fan or in the benchtop version.
More than sharpening
Models and versions
High efficiency 1000 W exhaust fan for dust
suction
Flat belt drive and 0.25 kW motor
Centesimal micrometric
feed
Grinding wheel spindle with preloaded axial-radial
bearings
Grinding wheel head with taper
attachment
Interchangeable head with five different heads
Arm made of high strength
ductile cast iron
Monolithic grey cast iron structure with high vibration
damping coefficient
Standard head for sharpening engravers
Universal clamp
Tool for engraving stone and marble
A grinding centre that is always available and easy to tool for any kind of machining operation. Thanks to the interchangeable head, any kind of tool can be sharpened or parts with small dimensions can be shaped. Tools for wood, for plastic, engravers for any material, sharpening and shaping of small cutters: nothing is impossible for the new N2.
Interchangeable heads for sharpening anything
No limits
Model N2-16 N2-20 N2-26 Min. collet diameter 2 mm 2 mm 2 mm Max collet diameter 12 mm 16 mm 22 mm Max grinding head range
10 mm 10 mm 15 mm
Max tool length 120 mm 120 mm 120 mm Collet body 16 20 26 Divider positions 12 12 24 Arm rotation -30°+120° -30°+120° -30°+120° Rake angle 0° - 40° 0° - 40° 0° - 40° Cross travel 20 mm 20 mm 25 mm Longitudinal travel 15 mm 15 mm 20 mm Arm travel 20 mm 20 mm 30 mm Grinding wheel speed 5200 1’/min 5200 1’/min 5200 1’/min Motor power 0.25 kW 0.25 kW 0.37 kW Exhaust fan power 0.1 kW 0.1 kW 0.1 kW Power supply 400 V 50Hz 400 V 50Hz 400 V 50Hz Weight of benchtop machine
65 kg 65 kg 75 kg
Weight with base and exhaust fan
110 kg 110 kg 120 kg
Dimensions 500x400x1230 mm 500x400x1230 mm 500x400x1230 mm
Bi-emme S.n.c. Via G. Pastore, 7/9
50063 Figline e Incisa Valdarno (FI) Ph. +39 (0) 55 958022 Fax +39 (0) 55 958063
www.bmsnc.com
A machine for any requirement
