+ All Categories
Home > Documents > 50068218_A4-P________1.0_EN

50068218_A4-P________1.0_EN

Date post: 18-Nov-2015
Category:

Documents
Upload: shani5573
View: 12 times
Download: 0 times
Download Report this document
Share this document with a friend
Description:
50068218_A4-P________1.0_EN
7
2 2 Foundation Bolts Plant : Nyumba Ya Akiba-Cement Plant Department : 441. Clinker cooler Contract : 1345327 Approved date : 03-Sep-14 Created by : VMA Approved by : ASU Doc. No.: 50068218-1.0
Transcript

FrontPage22Foundation BoltsPlant:Nyumba Ya Akiba-Cement PlantDepartment:441. Clinker coolerContract:1345327Approved date:03-Sep-14Created by:VMAApproved by:ASUDoc. No.:50068218-1.0

Page 1Foundation BoltsDoc. No.:50068218-1.0Plant:Nyumba Ya Akiba-Cement PlantDepartment:441. Clinker Cooler12345Foundation boltHexagon boltStud anchorAdhesive anchorRod screwWith nut and plain washer.With nut and plain washer.With nut and plain washer.With nut and plain washer.With 2 nuts, plain and square washer.ISO 630-80,ISO 724ISO 630-80,Fe 360 BISO 898, 4.6Fe 360 BISO 724ISO 724, ISO 898dL1mmmmNote.10321240Bolt, anchors and screws to be supplied with nuts and1650washers as indicated above.2063Additional nuts and washers, if any, are stated on a2263separate line in the foundation bolt list.2480Rod screws (type 5) to be supplied as threaded rods or3080round bars.33100The length (L) is estimated only. The actual length have36100to be verified by measuring the actual dimensions on site39125before cutting the screw.42125The thread length (b) is the minimum length usually45125required for this dimension of screw.4816052160561606420072x620076x623080x6230ISO 630 Structural steels90x6280ISO 724 Isometric screw threads100x6280ISO 898 Mechanical properties for fasteners

&C&"Verdana,kursiv"&7The information transmitted by this document is the proprietary and confidential property of FLSmidthand may not be duplicated, disclosed or utilized without written consent from FLSmidth&R&"Verdana,normal"&8 1

Page 2Foundation BoltsDoc. No.:50068218-1.0Plant:Nyumba Ya Akiba-Cement PlantDepartment:441. Clinker CoolerABCHexagon nutSquare taper washer (U)Square taper washer (I)ISO 4032DIN 434DIN 435DEFSquare washerPlain washerSpring washerISO 7091ISO 7091DIN 128-Adad1tmmmmmmmm10100111012100141016100181020100221022100241024120261230120331233150361636150391639200422042200452045200482048250522552250562556250622564300703072x6300783076x6350823580x6350863590x64009640100x640010740DIN 434 Square taper washers for use with channel sections.DIN 435 Square taper washers for use with I-section.DIN 128-A Spring washer.ISO 4032 Hexagon nut; Product grades A d M16 and B d > M16.ISO 7091 Plain washer; Product grade C.

&C&"Verdana,kursiv"&7The information transmitted by this document is the proprietary and confidential property of FLSmidthand may not be duplicated, disclosed or utilized without written consent from FLSmidth&R&"Verdana,normal"&8 2

Page 3Foundation BoltsDoc. No.:50068218-1.0Plant:Nyumba Ya Akiba-Cement PlantDepartment:441. Clinker CoolerTypeNo.dghcLbEquipmentEquipmentNo.Req.mmNo.1836150650100Kiln hood441.KH050836Kiln hood (Nuts)441.KH05014324115400120Cooler CB441.CC1004324Cooler CB (Nuts)441.CC10014420100550100HRB441.RB4004420HRB (Nuts)441.RB4001424100400120HRB441.RB400424HRB (Nuts)441.RB4001439802200100Fan MT 280 S441.FN5901430751250100Fan MT 280 S441.FN590112561002240150Stack441.SK5955124210050100013001300Duct(70-1)441.XA910112241001000120Duct (70-2)441.XA910

&C&"Verdana,kursiv"&7The information transmitted by this document is the proprietary and confidential property of FLSmidthand may not be duplicated, disclosed or utilized without written consent from FLSmidth&"Arial,normal"&10.&R&"Verdana,normal"&8 3

MBD003120BA.doc

Attribute VB_Name = "OpenClose"Sub auto_open()' By MHPG (Martin Pantmann Geldorf) Dim SystemPath As String SystemPath = GetSetting("Foundlist", "Paths", "System", "") Application.EnableEvents = False On Error Resume Next Application.Run "FOUNDDOCUMENTUM.xls!ByOpening" If Err.Number = 1004 Then Application.Workbooks.Open (SystemPath & "FOUNDDOCUMENTUM.xls") Application.Run "FOUNDDOCUMENTUM.xls!ByOpening" End IfEnd SubSub auto_close() Dim SystemPath As String SystemPath = GetSetting("Foundlist", "Paths", "System", "") On Error Resume Next Application.Run "FOUNDDOCUMENTUM.xls!VedNedlukning" If Err.Number = 1004 Then Application.Workbooks.Open (SystemPath & "FOUNDDOCUMENTUM.xls") Application.Run "FOUNDDOCUMENTUM.xls!VedNedlukning" End IfEnd Sub

Attribute VB_Name = "Sheet2"Attribute VB_Base = "0{00020820-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = True

Attribute VB_Name = "Sheet1"Attribute VB_Base = "0{00020820-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = True

Attribute VB_Name = "ThisWorkbook"Attribute VB_Base = "0{00020819-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = True

Attribute VB_Name = "Sheet4"Attribute VB_Base = "0{00020820-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = TruePrivate Sub Worksheet_SelectionChange(ByVal Target As Range)Dim Fil As String, Sti As StringSti = GetSetting("Foundlist", "Paths", "System", "")Fil = Sti & "FOUNDDOCUMENTUM.xls"'Debug.Print FilA = Application.Run("FOUNDDOCUMENTUM.xls!SelectionChange_Macro", Target)End SubPrivate Sub Worksheet_Change(ByVal Target As Range)Dim Fil As String, Sti As StringSti = GetSetting("Foundlist", "Paths", "System", "")Fil = Sti & "Founddocumentum.xls"A = Application.Run("FOUNDDOCUMENTUM.xls!Change_value", Target)If Err.Number = 1004 Then biblio = Sti & "Founddocumentum.xls" biblio = biblio & "\" & Fil A = Application.Workbooks.Open(biblio) A = Application.Run("FOUNDDOCUMENTUM.xls!Change_value", Target)End IfEnd Sub

Attribute VB_Name = "Sheet3"Attribute VB_Base = "0{00020820-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = True

MBD00313250.doc

Attribute VB_Name = "OpenClose"Sub auto_open()' By MHPG (Martin Pantmann Geldorf) Dim SystemPath As String SystemPath = GetSetting("Foundlist", "Paths", "System", "") Application.EnableEvents = False On Error Resume Next Application.Run "FOUNDDOCUMENTUM.xls!ByOpening" If Err.Number = 1004 Then Application.Workbooks.Open (SystemPath & "FOUNDDOCUMENTUM.xls") Application.Run "FOUNDDOCUMENTUM.xls!ByOpening" End IfEnd SubSub auto_close() Dim SystemPath As String SystemPath = GetSetting("Foundlist", "Paths", "System", "") On Error Resume Next Application.Run "FOUNDDOCUMENTUM.xls!VedNedlukning" If Err.Number = 1004 Then Application.Workbooks.Open (SystemPath & "FOUNDDOCUMENTUM.xls") Application.Run "FOUNDDOCUMENTUM.xls!VedNedlukning" End IfEnd Sub

Attribute VB_Name = "Sheet2"Attribute VB_Base = "0{00020820-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = True

Attribute VB_Name = "Sheet1"Attribute VB_Base = "0{00020820-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = True

Attribute VB_Name = "ThisWorkbook"Attribute VB_Base = "0{00020819-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = True

Attribute VB_Name = "Sheet4"Attribute VB_Base = "0{00020820-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = TruePrivate Sub Worksheet_SelectionChange(ByVal Target As Range)Dim Fil As String, Sti As StringSti = GetSetting("Foundlist", "Paths", "System", "")Fil = Sti & "FOUNDDOCUMENTUM.xls"'Debug.Print FilA = Application.Run("FOUNDDOCUMENTUM.xls!SelectionChange_Macro", Target)End SubPrivate Sub Worksheet_Change(ByVal Target As Range)Dim Fil As String, Sti As StringSti = GetSetting("Foundlist", "Paths", "System", "")Fil = Sti & "Founddocumentum.xls"A = Application.Run("FOUNDDOCUMENTUM.xls!Change_value", Target)If Err.Number = 1004 Then biblio = Sti & "Founddocumentum.xls" biblio = biblio & "\" & Fil A = Application.Workbooks.Open(biblio) A = Application.Run("FOUNDDOCUMENTUM.xls!Change_value", Target)End IfEnd Sub

Attribute VB_Name = "Sheet3"Attribute VB_Base = "0{00020820-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = True

MBD00312C8D.doc

Attribute VB_Name = "OpenClose"Sub auto_open()' By MHPG (Martin Pantmann Geldorf) Dim SystemPath As String SystemPath = GetSetting("Foundlist", "Paths", "System", "") Application.EnableEvents = False On Error Resume Next Application.Run "FOUNDDOCUMENTUM.xls!ByOpening" If Err.Number = 1004 Then Application.Workbooks.Open (SystemPath & "FOUNDDOCUMENTUM.xls") Application.Run "FOUNDDOCUMENTUM.xls!ByOpening" End IfEnd SubSub auto_close() Dim SystemPath As String SystemPath = GetSetting("Foundlist", "Paths", "System", "") On Error Resume Next Application.Run "FOUNDDOCUMENTUM.xls!VedNedlukning" If Err.Number = 1004 Then Application.Workbooks.Open (SystemPath & "FOUNDDOCUMENTUM.xls") Application.Run "FOUNDDOCUMENTUM.xls!VedNedlukning" End IfEnd Sub

Attribute VB_Name = "Sheet2"Attribute VB_Base = "0{00020820-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = True

Attribute VB_Name = "Sheet1"Attribute VB_Base = "0{00020820-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = True

Attribute VB_Name = "ThisWorkbook"Attribute VB_Base = "0{00020819-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = True

Attribute VB_Name = "Sheet4"Attribute VB_Base = "0{00020820-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = TruePrivate Sub Worksheet_SelectionChange(ByVal Target As Range)Dim Fil As String, Sti As StringSti = GetSetting("Foundlist", "Paths", "System", "")Fil = Sti & "FOUNDDOCUMENTUM.xls"'Debug.Print FilA = Application.Run("FOUNDDOCUMENTUM.xls!SelectionChange_Macro", Target)End SubPrivate Sub Worksheet_Change(ByVal Target As Range)Dim Fil As String, Sti As StringSti = GetSetting("Foundlist", "Paths", "System", "")Fil = Sti & "Founddocumentum.xls"A = Application.Run("FOUNDDOCUMENTUM.xls!Change_value", Target)If Err.Number = 1004 Then biblio = Sti & "Founddocumentum.xls" biblio = biblio & "\" & Fil A = Application.Workbooks.Open(biblio) A = Application.Run("FOUNDDOCUMENTUM.xls!Change_value", Target)End IfEnd Sub

Attribute VB_Name = "Sheet3"Attribute VB_Base = "0{00020820-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = True

MBD0031086C.doc

Attribute VB_Name = "OpenClose"Sub auto_open()' By MHPG (Martin Pantmann Geldorf) Dim SystemPath As String SystemPath = GetSetting("Foundlist", "Paths", "System", "") Application.EnableEvents = False On Error Resume Next Application.Run "FOUNDDOCUMENTUM.xls!ByOpening" If Err.Number = 1004 Then Application.Workbooks.Open (SystemPath & "FOUNDDOCUMENTUM.xls") Application.Run "FOUNDDOCUMENTUM.xls!ByOpening" End IfEnd SubSub auto_close() Dim SystemPath As String SystemPath = GetSetting("Foundlist", "Paths", "System", "") On Error Resume Next Application.Run "FOUNDDOCUMENTUM.xls!VedNedlukning" If Err.Number = 1004 Then Application.Workbooks.Open (SystemPath & "FOUNDDOCUMENTUM.xls") Application.Run "FOUNDDOCUMENTUM.xls!VedNedlukning" End IfEnd Sub

Attribute VB_Name = "Sheet2"Attribute VB_Base = "0{00020820-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = True

Attribute VB_Name = "Sheet1"Attribute VB_Base = "0{00020820-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = True

Attribute VB_Name = "ThisWorkbook"Attribute VB_Base = "0{00020819-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = True

Attribute VB_Name = "Sheet4"Attribute VB_Base = "0{00020820-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = TruePrivate Sub Worksheet_SelectionChange(ByVal Target As Range)Dim Fil As String, Sti As StringSti = GetSetting("Foundlist", "Paths", "System", "")Fil = Sti & "FOUNDDOCUMENTUM.xls"'Debug.Print FilA = Application.Run("FOUNDDOCUMENTUM.xls!SelectionChange_Macro", Target)End SubPrivate Sub Worksheet_Change(ByVal Target As Range)Dim Fil As String, Sti As StringSti = GetSetting("Foundlist", "Paths", "System", "")Fil = Sti & "Founddocumentum.xls"A = Application.Run("FOUNDDOCUMENTUM.xls!Change_value", Target)If Err.Number = 1004 Then biblio = Sti & "Founddocumentum.xls" biblio = biblio & "\" & Fil A = Application.Workbooks.Open(biblio) A = Application.Run("FOUNDDOCUMENTUM.xls!Change_value", Target)End IfEnd Sub

Attribute VB_Name = "Sheet3"Attribute VB_Base = "0{00020820-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = True

MBD00311BD9.doc

Attribute VB_Name = "OpenClose"Sub auto_open()' By MHPG (Martin Pantmann Geldorf) Dim SystemPath As String SystemPath = GetSetting("Foundlist", "Paths", "System", "") Application.EnableEvents = False On Error Resume Next Application.Run "FOUNDDOCUMENTUM.xls!ByOpening" If Err.Number = 1004 Then Application.Workbooks.Open (SystemPath & "FOUNDDOCUMENTUM.xls") Application.Run "FOUNDDOCUMENTUM.xls!ByOpening" End IfEnd SubSub auto_close() Dim SystemPath As String SystemPath = GetSetting("Foundlist", "Paths", "System", "") On Error Resume Next Application.Run "FOUNDDOCUMENTUM.xls!VedNedlukning" If Err.Number = 1004 Then Application.Workbooks.Open (SystemPath & "FOUNDDOCUMENTUM.xls") Application.Run "FOUNDDOCUMENTUM.xls!VedNedlukning" End IfEnd Sub

Attribute VB_Name = "Sheet2"Attribute VB_Base = "0{00020820-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = True

Attribute VB_Name = "Sheet1"Attribute VB_Base = "0{00020820-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = True

Attribute VB_Name = "ThisWorkbook"Attribute VB_Base = "0{00020819-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = True

Attribute VB_Name = "Sheet4"Attribute VB_Base = "0{00020820-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = TruePrivate Sub Worksheet_SelectionChange(ByVal Target As Range)Dim Fil As String, Sti As StringSti = GetSetting("Foundlist", "Paths", "System", "")Fil = Sti & "FOUNDDOCUMENTUM.xls"'Debug.Print FilA = Application.Run("FOUNDDOCUMENTUM.xls!SelectionChange_Macro", Target)End SubPrivate Sub Worksheet_Change(ByVal Target As Range)Dim Fil As String, Sti As StringSti = GetSetting("Foundlist", "Paths", "System", "")Fil = Sti & "Founddocumentum.xls"A = Application.Run("FOUNDDOCUMENTUM.xls!Change_value", Target)If Err.Number = 1004 Then biblio = Sti & "Founddocumentum.xls" biblio = biblio & "\" & Fil A = Application.Workbooks.Open(biblio) A = Application.Run("FOUNDDOCUMENTUM.xls!Change_value", Target)End IfEnd Sub

Attribute VB_Name = "Sheet3"Attribute VB_Base = "0{00020820-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = True

Attribute VB_Name = "OpenClose"Sub auto_open()' By MHPG (Martin Pantmann Geldorf) Dim SystemPath As String SystemPath = GetSetting("Foundlist", "Paths", "System", "") Application.EnableEvents = False On Error Resume Next Application.Run "FOUNDDOCUMENTUM.xls!ByOpening" If Err.Number = 1004 Then Application.Workbooks.Open (SystemPath & "FOUNDDOCUMENTUM.xls") Application.Run "FOUNDDOCUMENTUM.xls!ByOpening" End IfEnd SubSub auto_close() Dim SystemPath As String SystemPath = GetSetting("Foundlist", "Paths", "System", "") On Error Resume Next Application.Run "FOUNDDOCUMENTUM.xls!VedNedlukning" If Err.Number = 1004 Then Application.Workbooks.Open (SystemPath & "FOUNDDOCUMENTUM.xls") Application.Run "FOUNDDOCUMENTUM.xls!VedNedlukning" End IfEnd Sub

Attribute VB_Name = "Sheet2"Attribute VB_Base = "0{00020820-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = True

Attribute VB_Name = "Sheet1"Attribute VB_Base = "0{00020820-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = True

Attribute VB_Name = "ThisWorkbook"Attribute VB_Base = "0{00020819-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = True

Attribute VB_Name = "Sheet4"Attribute VB_Base = "0{00020820-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = TruePrivate Sub Worksheet_SelectionChange(ByVal Target As Range)Dim Fil As String, Sti As StringSti = GetSetting("Foundlist", "Paths", "System", "")Fil = Sti & "FOUNDDOCUMENTUM.xls"'Debug.Print FilA = Application.Run("FOUNDDOCUMENTUM.xls!SelectionChange_Macro", Target)End SubPrivate Sub Worksheet_Change(ByVal Target As Range)Dim Fil As String, Sti As StringSti = GetSetting("Foundlist", "Paths", "System", "")Fil = Sti & "Founddocumentum.xls"A = Application.Run("FOUNDDOCUMENTUM.xls!Change_value", Target)If Err.Number = 1004 Then biblio = Sti & "Founddocumentum.xls" biblio = biblio & "\" & Fil A = Application.Workbooks.Open(biblio) A = Application.Run("FOUNDDOCUMENTUM.xls!Change_value", Target)End IfEnd Sub

Attribute VB_Name = "Sheet3"Attribute VB_Base = "0{00020820-0000-0000-C000-000000000046}"Attribute VB_GlobalNameSpace = FalseAttribute VB_Creatable = FalseAttribute VB_PredeclaredId = TrueAttribute VB_Exposed = TrueAttribute VB_TemplateDerived = FalseAttribute VB_Customizable = True