Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
216
51 INTRODUCTION
The transition-metal mediated reaction for the synthesis of carbon-carbon bonds was
an important discovery for synthetic chemists These metal catalyzed (usually Pd)
reactions are ranked today among the most general transformations in organic
synthesis which have great industrial potential for the synthesis of chemicals
therapeutic drugs and their intermediates The most prevalent method for the synthesis
of carbonyl compounds is palladium catalyzed carbonylation reactions
(Brennfhrer et al 2009) Transition metal-catalyzed carbonylation of aryl halides in
the presence of an appropriate nucleophile represents a valuable tool for the selective
introduction of carboxylic functionality into aromatic molecules Depending on the
nature of the nucleophilic component the products can be aryl esters ketones amides
and aldehydes
Synthesis of aromatic carbonyl compounds such as amides esters ketones
acids have fundamental importance in organic chemistry (Sugihar et al 1994 Brigg
and Sridharan 1993) Phenyl esters are widely used in liquid crystals (Dewar and
Goldberg 1970) photosensitizers (Khoo 1999) and many of them are biologically
active compounds (Neelakantan 1965) Polyesters and polyamides used extensively
in the polymer chemistry (Yoneyama 1989) Aromatic amides are an important
functional group of various natural products and designed pharmaceutical molecules
(Figure 51) Some heterocyclic amides are potential CNS (central nervous system)
active compounds (Hall et al 1995)
Figure 51 Structure of pharmaceutically significant carbonyl compounds
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
217
511 ALKOXYCARBONYLATION REACTIONS
The carbonylation reaction in which aryl halide reacts with carbon monoxide and
alcohol (nucleophile) to give esters as a product is called as alkoxycarbonylation
reaction whereas reaction with phenol gives phenyl ester as a product is called as
phenoxycarbonylation Depending upon the alcoholphenol employed one can get
variety of aliphatic or aromatic esters
In 1996 Nomura and co-workers developed palladium-catalyzed
alkoxycarbonylation of aryl iodides with different alcohols using PdCl2(PPh3)2 as a
catalyst CuI as a co-catalyst and tributylamine as base in DMF as a solvent (Scheme
51) They screened different electron-withdrawing and donating substituents on the
nucleophile In addition carbonylative polyester formation using bis(6-iodophenyl)
ether was also studied
Scheme 51 Palladium-catalyzed alkoxycarbonylation of aryl iodides
Liua et al (2008) demonstrated palladium-catalyzed alkoxycarbonylation of
aryl iodides using a thiourea-oxazoline type ligand under mild reaction conditions
(Scheme 52) Different thiourea type ligands were screened and ligand L1 in the
presence of PdCl2(CH3CN)2 was applied for the alkoxycarbonylation various aryl
iodides and alcohols
Scheme 52 Palladiumthiourea-oxazoline catalyzed alkoxycarbonylation reaction
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
218
Haung and group (2005) has prepared silica-supported sulphur and phosphine
mixed bidentate palladium complex 4-thia-6-chlorohexyltrimethoxysilane was
immobilized on fumed silica followed by reacting with potassium diphenylphosphide
in tetrahydrofuran (THF) and then the reaction with palladium chloride in acetone
The polymeric palladium complex then explored for the carbonylation of aryl halide
with various nucleophiles such as alcohol and amine (Scheme 53) The developed
polymeric palladium complex was recovered and reused without loss of activity
Scheme 53 Si-S P-Pd(II) complex catalyzed carbonylation reactions
Watson et al (2008) reported carbonylation of aryl chlorides at ambient CO
pressure using Pd(dcpp) 2 HBF4 as a efficient catalyst (Scheme 54) The catalyst was
successfully used for aryl and heteroaryl chlorides in combination with variety of
aliphatic and aromatic alcohols The protocol was further employed for the synthesis
of various acid derivatives via carbonylation reactions
Scheme 54 Pd(dcpp) 2HBF4 catalyzed alkoxycarbonylation reaction
Synthesis of tertiary ester by palladium-catalyzed alkoxycarbonylation of aryl
bromides has been reported recently by Xin et al (2012) (Scheme 55) 110-Bis-
(diisopropylphosphino)ferrocene ligand (DiPrPF) applied for the alkoxycarbonylation
of aryl bromides with sodium alkoxide forming tertiary esters Different sodium
alkoxides were screened for the synthesis of verity of tertiary esters
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
219
Scheme 55 Palladium-catalyzed synthesis of tertiary esters
Xia and co-workers (2008) has developed a palladium on charcoal (PdC)
catalyzed protocol for the carbonylation of variety of substrates They demonstrated
phosphine free protocol for the alkoxycarbonylation and phenoxycarbonylation of aryl
iodides using alcohols or phenols as nucleophiles and carbonylative Sonogashira
coupling reaction of aryl iodides with terminal alkynes (Scheme 56) The catalytic
system was applied for the synthesis of variety of esters and alkynyl ketones
Scheme 56 PdC catalyzed carbonylation reactions
Robertson and co-workers (2012) have synthesized polymer-supported tri-
alkyl phosphine ligand this trialkyl phosphine ligands was loaded with palladium and
supported on Merrifield resin This supported complex was then explored for
alkoxycarbonylation reaction and SuzukindashMiyaura coupling reactions (Scheme 57)
Range of carbonyl compounds including aliphaticaromatic esters and substituted
biaryl ketones were synthesized with ease The catalyst was also recycled up to three
consecutive cycles
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
220
Scheme 57 Palladium-catalyzed alkoxycarbonylation of alcoholsphenols
Recently Siva Prasad and Satyanarayana (2013) have prepared PdFe3O4
catalyst and applied for carbonylation of aryl halide with variety of alcohols (Scheme
58) The catalyst was recovered with the simple application of an external magnetic
field due to paramagnetic behaviour of Fe3O4 catalyst was easily separated and was
recycled up to five consecutive cycles
Scheme 58 PdFe3O4 catalyzed alkoxycarbonylation of aryl halides
Palladium-catalyzed carbonylation of phenols (phenoxycarbonylation) has
been developed by Wu et al (2012) (Scheme 59) Activation of the phenols occurs
through in situ generation of aryl nonaflates Both electron-donating and electron-
withdrawing substituents on phenol ring were well tolerated for phenoxycarbonylation
under the developed catalytic system
Scheme 59 [Pd(cinnamyl)Cl2] catalyzed phenoxycarbonylation
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
221
For the first time CO free approach for alkoxycarbonylation of aryl halides
was developed by Yamane and co-workers (2011) (Scheme 510) The molybdenum
carbonyl complexes [Mo(CO)6] act as the catalyst and the source of carbon monoxide
(Scheme 510) The reaction was applied for the multi-acylation of polyols and
synthesis of a variety of carboxylic acid derivatives
Scheme 510 Mo(CO)6-mediated alkoxycarbonylation of aryl halides with alcohols
Another CO free approach using alkyl formates was demonstrated by Beller
and group (2010) (Scheme 511) The reaction was carried out by using palladium(II)
acetaten-butylbis(1-adamantly)phosphine (L1) and DBU as base in NMP as a
solvent The protocol was applied for alkoxycarbonylation of various aryl chlorides
Scheme 511 CO free alkoxycarbonylation of aryl halides using aryl formates
Recently for the first time Zhang et al (2012) reported transition-metal-free
alkoxycarbonylation of aryl halides using Potassium tert-butoxide (KOtBu) and high
pressure of carbon monoxide (Scheme 512) Moreover electron paramagnetic
resonance (EPR) experiments were conducted to study the reaction mechanism which
revealed participation of radicals in the reaction system The major drawback of the
protocol was the use of benzene as a solvent requirement of very high CO pressure
and of longer reaction time
Scheme 512 Transition metal free alkoxycarbonylation of aryl halides
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
222
512 AMINOCARBONYLATION REACTION
An aminocarbonylation reaction refers to the carbonylation reaction in which amine
as a nucleophile reacts with aryl halide in the presence of carbon monoxide which
gives amide as a major product Depending upon the amine employed one can get a
variety of aromatic aliphatic and heterocyclic amides
Gee and co-workers (2006) showed the application of microfluidic device for
the rapid synthesis of amides via aminocarbonylation reactions (Scheme 513) They
showed application of microstructure device for first time to perform a gas-liquid
carbonylation reaction The reaction was carriedout on a glass-fabricated Microchip
using Pd(dppp)Cl2 as a catalyst
Scheme 513 Pd phosphine catalyzed aminocarbonylation reaction
Whittall and group (2007) explored Bedford-type palladacycle complex (1) in
combination with Bis(diphenylphosphino)ferrocene ligand (dppf) for the
aminocarbonylation and alkoxycarbonylation reactions (Scheme 514) This palladium
complex acted as highly active catalysts for both the reactions showing compatibility
with a wide variety of substrates
Scheme 514 Palladacycle complex catalyzed carbonylation reactions
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
223
A method for the aminocarbonylation of aryl bromide using xantphos as a
ligand has been reported recently by Buchwald and group (2008) (Scheme 515) The
method was effective for the direct synthesis of Weinreb amides 1ry
and 2ry
benzamides and methyl esters from the corresponding aryl bromides at atmospheric
pressure of CO The catalytic system was applied for variety of substrates providing
good to excellent yield of desired carbonylated products In addition a putative
catalytic intermediate (Xantphos)Pd(Br)benzoyl was synthesized and an X-ray crystal
structure was also provided This crystal structure revealed that this species possess a
cis-coordinated palladium centre
Scheme 515 Pd(OAc)2 Xantphos catalyzed aminocarbonylation reaction
Kumar et al (2004) demonstrated the aminocarbonylation of unprotected
indoles with different N- and O-nucleophiles using Pddppf as a catalyst (Scheme
516) Various indole carboxylic acid derivatives were accessible in excellent yield
For example aminocarbonylation of 4- 5- 6- or 7-bromoindole with arylethyl
piperazines provided a direct one-step synthesis for CNS active amphetamine
derivatives
Scheme 516 Pd dppf catalyzed aminocarbonylation of bromoindoles
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
224
Pd-catalyzed aminocarbonylation of heteroaryl halides using monodentate
ligand di-tert-butylphosphinoferrocene tetrafluoroborate has been developed by
Senanayake and co-workers (2009) (Scheme 517) The developed protocol was
successfully applied for the preparation of a series of heteroaromatic amide
derivatives in good yields
Scheme 517 Pd P(Fc)(t-Bu)2HBF4 catalyzed aminocarbonylation
Kollar and group reported (2007) Pd(OAc)2PPh3 catalyzed protocol for the
aminocarbonylation of heteroaryl iodides (Scheme 518) Various primary and
secondary amines including amino acid methyl esters were used as nucleophiles in
palladium-catalyzed aminocarbonylation of 2-iodopyridine 3-iodopyridine and
iodopyrazine The reaction works well with variety of nucleophiles having electron-
rich and electron-poor substituents
Scheme 518 Pd(OAc)2PPh3 catalyzed aminocarbonylation of heteroaryl iodides
Well-dispersed palladium(0) nanoparticles stabilized with phosphonium based
ionic liquid were synthesized and explored for the aminocarbonylation reaction of aryl
iodide in ionic liquid media by Zhu et al (2011) (Scheme 519) Different derivatives
of amides were synthesized from corresponding aryl halide and aryl amines
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
225
Scheme 519 Pd(0) nanoparticles catalyzed aminocarbonylation of heteroaryl iodides
An efficient methodology for the synthesis of amides via palladium-catalyzed
aminocarbonylation of aryl iodides was reported by Castill et al (2012) using the
bulky cis-12-bis[(di-tert-butylphosphino)methyl]cyclohexane ligand under
atmospheric pressure of carbon monoxide (Scheme 520) A broad range of iodoaryl
derivatives with different amine were screened
Scheme 520 PdP(Fc)(t-Bu)2 catalyzed aminocarbonylation
Recently Dang et al (2012) reported an aminocarbonylation of aryl iodides
using palladium nanoparticles supported on MOF-5 (metal-organic frameworks)
(Scheme 521) Various palladium supported catalysts using different solid supports
like Silica Al2O3 and MOF has been synthesized but palladium catalyst supported on
MOF-5 provided better results The developed catalytic system worked under
atmospheric pressure of carbon monoxide and was applied for the synthesis of various
substituted amides furthermore the catalyst was also recycled
Scheme 521 Pd nanoparticles supported on MOF-5 catalyzed aminocarbonylation
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
226
Begouin et al (2009) have demonstrated that [Mo(CO)6] can be successfully
used as a CO source in aminocarbonylation reactions (Scheme 522) Range of aryl
and heteroaryl substrates either halides or amines were tested for the
aminocarbonylation reactions
Scheme 522 CO free aminocarbonylation using Mo(CO)6
Literature reports reveals that alkoxyphenoxycarbonylation and
aminocarbonylation were well explored by using a variety of homogeneous Pd
complexes with different air and moisture sensitive NP containing ligands which had
problems in the recovery and recycling of the expensive palladium catalyst Also there
is no general protocol developed which could efficiently catalyze the carbonylation of
aryl iodide with different nucleophiles such as phenols alcohols and amines Thus
there is a need to develop a chemically well defined air stable single-component Pd-
complex which can efficiently catalyze different carbonylation reactions including
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
Considering this immobilization strategies for metal complex wherein the
metal is coordinated to a ligand grafted on to an inorganic or organic support has been
developed (Lu and Toy 2009 Byun and Lee 2004) Ionic liquids containing metal
ions are considered as catalytic precursors and they can be immobilized on solid
support thus facilitates the reuse of catalyst finding a promising use in organic
transformations (Doorslaer et al 2010 Sasaki et al 2005 Sasaki et al 2008 Zhong
et al 2006) In this regards immobilized palladium metal ion containing ionic liquid
[ImmPd-IL] is explored for alkoxycarbonylation phenoxycarbonylation and
aminocarbonylation reactions
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
227
52 RESULTS AND DISCUSSION
Considering the objective of the development of efficient phosphine free
heterogeneous and recyclable protocol immobilized palladium metal ion containing
ionic liquid (ImmPd-IL) was used as a common catalyst for alkoxycarbonylation
phenoxycarbonylation and aminocarbonylation reactions (Scheme 523) The
methodology offers synthesis of various carbonyl compounds including aliphatic
esters aromatic esters and amides from corresponding alcohol phenol and amines
The protocol is advantageous due to the ease in handling of the catalyst and simple
workup procedure and effective catalyst recyclability
Scheme 523 ImmPd-IL catalyzed different carbonylation reactions
521 Preparation of immobilized palladium metal ion containing ionic liquid
(ImmPd-IL) catalyst
Preparation of immobilized palladium metal ion-containing ionic liquid catalyst
(ImmPd-IL) is a two step process (Scheme 524) The first step involves the anchoring
of ionic liquid on to a silica support which gives immobilized ionic liquid (Imm-IL)
In a second step the synthesized Imm-IL is loaded with palladium metal ion (PdCl2)
which results immobilized palladium ion-containing ionic liquid (ImmPd-IL)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
228
Scheme 524 Preparation of immobilized ImmPd-IL
522 ALKOXYCARBONYLATION REACTIONS
Initially alkoxycarbonylation reaction of aryl iodide with aliphatic alcohols was
studied (Scheme 525)
Scheme 525 ImmPd-IL catalyzed alkoxycarbonylation of aryl iodides with alcohols
The effect of various reaction parameters like base temperature time and CO
pressure using ImmPd-IL as a catalyst was studied (Table 51) The reaction of
iodobenzene with methyl alcohol in presence of CO was chosen as model reaction for
the optimization To study the role of base the reaction was carried out using various
inorganic bases like K2CO3 (80) Cs2CO3 (79) and organic bases like DBU (85)
Et3N (96) (Table 51 entries 1-4) As Et3N provided maximum yield of the methyl
benzoate it was used for further study No profound increase in the yield of methyl
benzoate was observed when the reaction temperature was increased from 80 to 100
degC therefore 80 degC was considered as an optimum reaction temperature for further
studies (Table 51 entries 4-5) When CO pressure was increased from 73 psi to 145
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
229
psi equivalent yield of the desired product was observed (Table 51 entry 6) Hence
the finalized reaction conditions were base Et3N temperature 80 degC solvent
alcohol (also as a nucleophile) time 3 h and 73 psi of CO pressure
Table 51 Effect of bases temperature and time on ImmPd-IL catalyzed
alkoxycarbonylation reactiona
Entry Base Temp
(degC)
CO Press
(psi)
Yield
()b
1 K2CO3 80 73 80
2 Cs2CO3 80 73 79
3 DBU 80 73 85
4 Et3N 80 73 96
5 Et3N 100 73 97
6 Et3N 100 145 98
a Reaction conditions
Iodobenzene (2 mmol) methyl alcohol (5 mL) ImmPd-IL (2
mol ) Et3N (3 mmol) 73 psi CO press Temp (80 degC) Time (3 h) b Yield based on GC analysis
These optimized reaction parameters were then successfully applied to variety
of aryl iodides with different alcohols (Table 52) Model reaction of iodobenzene
with methyl alcohol provided 94 isolated yield of methyl benzoate (Table 52 entry
1) Ethyl alcohol and benzyl alcohol also reacts efficiently with iodobenzene
providing 95 and 89 yield of ethyl benzoate and benzyl benzoate respectively
(Table 52 entries 1-3) The substituted iodobenzene derivatives 4-iodoaniline and 4-
iodophenol furnished 80 and 75 yield of the methyl 4-aminobenzoate and methyl
4-hydroxybenzoate respectively (Table 52 entries 4-5) 4-Acetyliodobenzene reacts
with ethanol and provided 81 yield of ethyl-4-acetylbenzoate (Table 52 entry 6)
Iodonaphthalene furnished 79 yield of methyl 2-naphthoate (Table 52 entry 7)
whereas 1-iodo-4-nitrobenzene efficiently reacts with methyl alcohol furnishing a
moderate yield (70) of methyl 4-nitrobenzoate (Table 52 entry 8)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
230
Table 52 ImmPd-IL catalyzed alkoxycarbonylation of aryl iodides with various
alcoholsa
Entry Aryl iodide Alcohol Product Yield
()b
1
MeOH
94
2
EtOH
95
3
89
4
MeOH
80
5
MeOH
75
6
EtOH
81
7
MeOH
79
8
MeOH
70
a Reaction conditions aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
Et3N (3 mmol) 73 psi CO press Temp (80 degC) Time (3 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
231
It is believed that the supported palladium metal leaches out from the solid
support and goes into the solution at higher temperature and the reaction was
catalyzed mainly by dissolved palladium species (Tambade et al 2008) Hence to
determine whether the reaction was catalyzed due to the ImmPd-IL complex or a
leached palladium metal that comes off the support at higher temperature during the
reaction a hot filtration test was performed (Lempers 1998 Zhao 2009)
Hot filtration experiment was performed for the alkoxycarbonylation of
iodobenzene with benzyl alcohol using ImmPd-IL catalyst Reaction was carried out
at 80 oC during reaction the ImmPd-IL complex catalyst was filtered off and the
filtrate without addition of catalyst was allowed to react further It was found that no
further reaction occurred after this hot filtration procedure hence this experimental
finding suggests there is no palladium leaching from the ImmPd-IL complex during
the progress of a reaction In addition to reconfirm this observation ICP-AES
analysis of the reaction mixture was carried out after 15 and 3 h which revealed a
below detectable level (below 001 ppm) of palladium in solution
It is also important to study the separation and recyclability of the catalyst
The ImmPd-IL catalyst was separated from the reaction mixture by a simple filtration
procedure and was found to be effective up to four consecutive recycles for
methoxycarbonylation reaction (Figure 52) No significant decrease in yield during
recycle study was observed
Figure 52 Recycle study of ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
232
523 PHENOXYCARBONYLATION REACTIONS
ImmPd-IL catalytic system was further explored for the phenoxycarbonylation of aryl
iodides with various phenols to yield corresponding phenyl esters and it was observed
that corresponding products were obtained in good to excellent yields (Scheme 526)
Scheme 526 Phenoxycarbonylation of aryl iodides with phenols using ImmPd-IL
For the optimization of reaction the influence of critical parameters such as
solvent base and CO pressure on the carbonylation of iodobenzene with phenol as a
nucleophile have been investigated (Table 53 entries 1-8)
Table 53 Effect of solvents and bases on ImmPd-IL catalyzed Phenoxycarbonylation
reactiona
Entry Solvent Base CO Press
(psi)
Yield
()b
1 DMF Et3N 145 56
2 14-Dioxane Et3N 145 62
3
Water Et3N 145 0
4 Toluene Et3N 145 90
5 Toluene DBU 145 80
6 Toluene K2CO3 145 66
7 Toluene Cs2CO3 145 72
8 Toluene Et3N 73 85
a Reaction conditions Iodobenzene (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
base (3 mmol) solvent (10 mL) 8 h at 100 degC b Yield based on GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
233
The role of various solvents such as NN-dimethyl formamide (DMF) (56)
14-dioxane (62) water (0) and toluene (90) was studied (Table 53 entries 1-
4) It was observed that the reaction was more favourable using toluene as a solvent
and provided 90 yield of phenyl benzoate (Table 54 entry 4) Various screened
organic and inorganic bases (K2CO3 Cs2CO3 DBU and Et3N) showed Et3N (90) to
be superior base at 100 degC (Table 53 entries 4-7) The initial reaction was carried out
at 145 psi CO pressure which provided 90 yield of phenyl benzoate a further
decrease in CO pressure up to 73 psi decreased the yield of the phenyl benzoate
(Table 53 entry 8) Hence the finalized reaction parameters were Et3N as a base in
toluene CO 73 psi at 100 degC for 8 h
These finalized reaction parameters were then applied for the
phenoxycarbonylation of different aryl halides and phenols having different electron-
donating or withdrawing groups (Table 54 entries 1-7) Iodobenzene reacts
efficiently with phenol within 8 h providing 89 isolated yield of phenyl benzoate
(Table 54 entry 1) Substituted phenols such as p-cresol p-methoxyphenol and p-
chlorophenol reacts with iodobenzene furnishing good to excellent yields of the
corresponding product (Table 54 entries 2-4) The substituted iodobenzene
derivative reacts with phenol and provided 86 yields of phenyl 4-methoxybenzoate
(Table 54 entry 5) 1-Iodo-4-nitrobenzene furnished moderate yield (59) of the
phenyl 4-nitrobenzoate (Table 54 entry 6) Reaction of 1-iodonaphthalene with
phenol provided 75 yield of phenyl 1-naphthoate (Table 54 entry 7)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
234
Table 54 ImmPd-IL catalyzed Phenoxycarbonylation of aryl iodides with various
phenolsa
Entry Aryl iodide Phenol Product Yield
()b
1
89
2
90
3
88
4
84
5
86
6
59
7
75
a Reaction conditions aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
235
524 AMINOCARBONYLATION REACTIONS
The scope of ImmPd-IL was further extended for aminocarbonylation of aryl iodides
with a range of aliphatic aromatic primary and secondary amines (Scheme 527)
Scheme 527 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with amines
The reaction of iodobenzene with aniline was selected as a model reaction for
optimization Various solvents such as DMF (80) water (70) anisole (60) and
toluene (92) were screened for the reaction (ionic liquid was insoluble in water as it
was immobilised on solid support) but toluene was found to be the best solvent
(Table 55 entries 1-4) Screening of a variety of bases showed Et3N (90) to be
superior at 100 degC (Table 55 entries 4-6) Further reaction was optimized with
respect to various reaction parameters including temperature time and CO pressure
and the best optimized reaction conditions were then applied for the
aminocarbonylation of a variety of iodoaryls and amines
Table 55 Effect of solvents and bases on ImmPd-IL catalyzed aminocarbonylation
reactiona
Entry Solvent Base Yield
()b
1 DMF Et3N 80
2 Water Et3N 70
3
Anisole Et3N 60
4 Toluene Et3N 92
5 Toluene Na2CO3 52
6 Toluene K2CO3 57
a Reaction conditions
Iodobenzene (1 mmol) aniline (2 mmol) ImmPd-IL (2 mol)
Et3N (3 mmol) Toluene (10 mL) 8 h at 100 degC 145 psi CO pressure b Yield based GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
236
The optimized reaction parameters were then applied for the
aminocarbonylation of substituted aryl halides and aromatic amines The model
reaction of iodobenzene with aniline provided 90 isolated yield of N-
phenylbenzamide under optimized reaction conditions (Table 56 entry 1) 4-
iodoanisole furnished 85 yield of 4-methoxy-N-phenylbenzamide (Table 56 entries
2) 4-methoxyaniline reacts with iodobenzene and provided 88 yield of N-(4-
methoxyphenyl)benzamide (Table 56 entry 3) 3-(Trifluoromethyl)aniline provided a
moderate yield of the expected product (Table 56 entry 4)
There after various primary aliphatic amines were screened for the
aminocarbonylation Cyclohexyl amine efficiently reacts with iodobenzene and 2-
iodonaphthalene and provided 92 and 80 yield of N-cyclohexylbenzamide and N-
cyclohexyl-1-naphthamide respectively (Table 56 entries 5-6) Reaction of
iodobenzene and 4-iodo acetophenone with tert-butyl amine furnished 92 and 89
yield of respective amide (Table 56 entry 7-8) Benzyl amine provided excellent
yields of N-benzylbenzamide (Table 56 entry 9) To our delight aromatic secondary
amine such as N-methyl aniline efficiently reacts with iodobenzene furnishing 91
yield of N-methyl-N-phenylbenzamide (Table 56 entry 10)
Table 56 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with various
aliphatic and aromatic primary amines and secondary aminesa
Entry Aryl iodide Amine Product Yield
()b
1
90
2
85
3
88
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
237
4
75
5
92
6
80
7
92
8
89
9
90
10
91
a Reaction conditions aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
238
53 CONCLUSION
The present study reports an efficient and common protocol for
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
by using a well-defined heterogeneous ImmPd-IL complex as a versatile
catalyst
The ease of preparation of the complex indefinite shelf life stability towards
air makes it an ideal complex for the above transformations
The reaction system was optimized with respect to various reaction parameters
and applied for carbonylation of a range of aryl iodides with different types of
alcohols phenols and amines furnishing good to excellent yields of the
corresponding products
The present protocol provided high yields of the desired products for all
carbonylation protocols
All the reactions were carried out under milder operating conditions
Catalytic system showed excellent activity and selectivity and effectively
recycled for four consecutive cycles
The leaching of the Pd metal was examined by hot filteration test and ICP-
AES analysis which revels no significant leaching of the palladium occurs
during the reaction
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
239
54 EXPERIMENTAL
541 Materials and Method N-methylimidazole (99+) and 3-trimethoxysilylpropyl
chloride (97+) were purchased from Aldrich PdCl2 was purchased from WAKO
Anhydrous redistilled 1-methylimidazole (99+) was purchased from Aldrich All
the dehydrated solvents were obtained from WAKO Aerosil 300 (300 m2g) was
obtained from Japan Aerosil Co and calcined at 573 K for 15 h in air and 30 min in
vacuum before use as a support The procedures for catalyst preparation were based
previous publication (Sasaki et al 2008) with some modifications Prepared catalyst
was characterized by using IR and elemental analysis and loading of the catalyst was
calculated by XRF measurements (SEA-2010 Seiko Electronic Industrial Co) The
XPS of ImmPd-IL was measured using a PHI5000 Versa Probe with monochromatic
focused (100 times 100 μm) Al Kα X-ray radiation (15 kV 30 mA) and dual beam
neutralization using a combination of argon ion gun and electron irradiation
The products are well-known in the literature and were compared with
authentic samples Progress of the reaction was monitored by gas chromatography
(GC) Gas chromatography analysis was carried out on Perkin-Elmer Clarus 400 GC
equipped flame ionization detector with a capillary column (Elite-1 30 m times 032 mm
times 025 μm) using the external standard method A GCMS-QP 2010 instrument (Rtx-
17 30 m times 25 mm id film thickness 025 μm df) (column flow 2 mL minminus1
80-240
degC at 10 degCmin rise) The 1H NMR spectra were recorded on Varian-300 MHz FT-
NMR spectrometer in CDCl3 using TMS as the internal standard The 13
C NMR
spectra were recorded with a JEOL FT-NMR model-AL300 (75 MHz) spectrometer
in CDCl3 Chemical shifts are reported in parts per million (δ) relative to
tetramethylsilane as the internal standard J (coupling constant) values were reported
in hertz (Hz) Proton splitting patterns are described as s (singlet) d (doublet) t
(triplet) and m (multiplet)
542 Preparation of immobilized palladium metal ion-containing ionic liquid
1-methyl-3-(3-trimethoxysilylpropyl) imidazolium chloride was synthesized by
mixing N-methylimidazole (0690 mol) and 3-trimethoxysilylpropyl chloride (0690
mol) in a dry 300 mL flask under a nitrogen atmosphere and refluxed for 48 h After
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
240
cooling to room temperature the resultant liquid was washed by dehydrated ethyl
acetate five times and dried at room temperature under reduced pressure for 48 h
The obtained compound was stored at 253 K under dry nitrogen Silica (Aerosil 300
surface area 300 m2g calcined at 573 K for 15 h in air) and 1-methyl-3-(3-
trimethoxysilylpropyl) imidazolium chloride (weight ratio 11) was dispersed in
dehydrated toluene and the mixture was refluxed for 48 h under nitrogen
After the reflux toluene was removed by filtration using glass filter and the
excess ionic liquid was removed by washing with dichloromethane several times The
resultant solid is denoted as Imm-IL In the next step Imm-IL was added to an
acetonitrile solution of PdCl2 and refluxed for 24 h Acetonitrile and excess of metal
chloride were removed by washing acetone using glass filter several times The metal
loading of ImmPd-IL was 34 wt as determined by XRF measurements (SEA-2010
Seiko Electronic Industrial Co)
543 General Experimental Procedure for Alkoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
and Et3N (3 mmol) were added The autoclave was closed purged three times with
carbon monoxide pressurized with 73 psi of CO and heated at 80 degC for 3 h After
completion of the reaction the reactor was cooled to room temperature and the
remaining CO gas was carefully vented and the reactor was opened The reactor
vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to remove any traces of
product and catalyst if present The catalyst was filtered and the reaction mixture was
evaporated under vacuum The residue obtained was purified by column
chromatography (silica gel 60-120 mesh petroleum etherethyl acetate 9505) to
afford the desired product
544 General Experimental Procedure for Recycling of ImmPd-IL
After completion of reaction the reaction mixture was cooled to room temperature
and the catalyst was collected by filtration The filtered catalyst was washed with
distilled water (3 times 5 mL) and methanol (3 times 5 mL) to remove all traces of product or
reactant present The filtered catalyst was then dried under reduced pressure The
dried catalyst was then used for the alkoxycarbonylation reaction of iodobenzene with
methanol for the recyclability experiment
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
241
545 XPS spectra of ImmPd-IL catalyst
The XPS spectra of ImmPd-IL shows that two peaks at 337 and 3424 eV for fresh
Imm-Pd are assigned as 3d52 and 3d32 for Pd2+
species respectively (Figure 53)
For the first recycle sample new peaks appear at 3342 and 3392 eV which are
assigned as 3d52 and 3d32 for Pd(0) species respectively indicating that the
reduction of the Pd species takes place during the catalytic reaction From the
spectrum of the fourth recycle sample it is obvious that the component of Pd2+
is
decreasing upon recycles although the component of Pd(0) remains constant
Figure 53 XPS of Pd 3d and Cl 2p for ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
242
546 General Experimental Procedure for Phenoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h After the completion of the reaction the reactor was cooled to room
temperature and the remaining CO gas was carefully vented and the reactor was
opened The reactor vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to
remove any traces of product and catalyst if present The catalyst was filtered and the
reaction mixture was evaporated under vacuum The residue obtained was purified by
column chromatography (silica gel 60-120 mesh petroleum etherethyl acetate
9505) to afford the desired product
547 General Experimental Procedure for Aminocarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol)
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h (the ensuing procedure is the same as that discussed above for the phenoxy
carbonylation reaction)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
243
55 SPECTRAL DATA
Methyl benzoate
GC-MS (EI 70 eV) mz () = 136 [M+] (35) 105 (100) 77 (55) 51 (20)
Ethyl benzoate
GC-MS (EI 70 eV) mz () = 150 [M+] (21) 122 (30) 105 (100) 77 (55)
Benzyl benzoate
1H NMR (300 MHz CDCl3) δ 804-808 (m 2H ArH) 731-752 (m 8H
ArH) 53 (s 2H CH2) 13
C NMR (75 MHz CDCl3) δ 16648 13619 13312
13025 12981 12870 12848 12834 12827 6677
Methyl 4-aminobenzoate
1H NMR (300 MHz CDCl3) δ 783 (d 2H J = 87 Hz ArH) 661 (d 2H J =
87 Hz ArH) 414 (br s 2H NH2) 383 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16724 15107 13151 11927 11368 5155
Methyl 4-hydroxybenzoate
1H NMR (300 MHz CDCl3) δ 794 (d 2H J = 87 Hz ArH) 722 (br s 1H
OH) 690 (d 2H J = 87 Hz ArH) 390 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16778 16055 13203 12201 11539 5223
Methyl 2-naphthoate
1H NMR (300 MHz CDCl3) δ 850 (s 1H ArH) 798-805 (m 2H ArH)
773 (t 2H J = 84 Hz ArH) 754-761 (m 2H ArH) 396 (s 3H OCH3) 13
C NMR
(75 MHz CDCl3) δ 16685 13634 13087 13082 13013 12938 12901 12778
12720 12632 12260 5235
Ethyl 4-acetylbenzoate
1H NMR (300 MHz CDCl3) δ 814-811 (m 2H ArH) 802-799 (m 2H
ArH) 441 (q 2H J = 69Hz CH2CH3) 265 (s 3H COCH3) 142 (t 3H J = 69Hz
CH2CH3) 13
C NMR (75 MHz CDCl3) δ 19766 16576 14012 13424 12977
12817 6147 2689 1427
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
244
Phenyl benzoate
1H NMR (300 MHz CDCl3) δ 825-822 (m 2H ArH) 768-863 (m 1H
ArH) 756-742 (m 4H ArH) 732-723 (m 3H ArH) 13
C NMR (75 MHz CDCl3)
δ 16590 15103 13365 13023 12964 12956 12864 12596 1217 GC-MS (EI
70 eV) mz () = 198 [M+] (9) 105 (100) 77 (40) 51 (9)
phenyl 4-nitrobenzoate
1H NMR (300 MHz CDCl3) δ = 837 (s 4H ArH) 723-748 (m 5H ArH)
13C NMR (75 MHz CDCl3) δ = 16347 15110 15072 13517 13144 12984
12657 12388 12157 GC-MS (EI 70 eV) mz () = 243 [M+] (15) 150 (100) 77
(10)
phenyl 4-methoxybenzoate
1H NMR (300 MHz CDCl3) δ = 814-816 (d 2H J = 87Hz ArH) 720-741
(m 5H ArH) 696-698 (d 2H J = 87 Hz ArH) 386 (s 3H OCH3) GC-MS (EI
70 eV) mz () = 228 [M+] (5) 135 (100) 107 (9) 77 (20)
phenyl-1-naphthoate
1H NMR (300 MHz CDCl3) δ = 904 (d 1H ArH) 845 (d1H ArH) 804
(d 1H ArH) 788 (d 1H ArH) 742-763 (m 5H ArH) 726-728 (m 3H ArH)
13C NMR (70 MHz CDCl3) δ = 16594 15118 13440 13408 13182 13134
12968 12883 12850 12829 12650 12605 12590 12465 12203
N-phenylbenzamide
1H NMR (300 MHz CDCl3) δ 798 (br s 1H NH) 787-883 (m 2H ArH)
763 (d 2H J = 76 Hz ArH) 732-753 (m 5H ArH) 716 (t 1H J = 73 ArH) 13
C
NMR (75 MHz CDCl3) δ 16590 13798 13502 13186 12911 12880 12709
12461 12032 ppm GC-MS mz () = 197 [M+] (42) 105 (100) 77 (54)
4-acetyl-N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 806 (d 2H J = 84Hz ArH) 777 (d 2H J
= 84Hz ArH) 601 (br s 1H NH) 393 (s 3H CH3) 148 (s 9H) 13
C NMR (75
MHz CDCl3) δ 16640 16605 13987 13234 12979 12682 5239 5195 2883
ppm GC-MS (EI 70 eV) mz () = 219 [M+] (20) 186 (22) 148 (100) 130 (30) 76
(20)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
217
511 ALKOXYCARBONYLATION REACTIONS
The carbonylation reaction in which aryl halide reacts with carbon monoxide and
alcohol (nucleophile) to give esters as a product is called as alkoxycarbonylation
reaction whereas reaction with phenol gives phenyl ester as a product is called as
phenoxycarbonylation Depending upon the alcoholphenol employed one can get
variety of aliphatic or aromatic esters
In 1996 Nomura and co-workers developed palladium-catalyzed
alkoxycarbonylation of aryl iodides with different alcohols using PdCl2(PPh3)2 as a
catalyst CuI as a co-catalyst and tributylamine as base in DMF as a solvent (Scheme
51) They screened different electron-withdrawing and donating substituents on the
nucleophile In addition carbonylative polyester formation using bis(6-iodophenyl)
ether was also studied
Scheme 51 Palladium-catalyzed alkoxycarbonylation of aryl iodides
Liua et al (2008) demonstrated palladium-catalyzed alkoxycarbonylation of
aryl iodides using a thiourea-oxazoline type ligand under mild reaction conditions
(Scheme 52) Different thiourea type ligands were screened and ligand L1 in the
presence of PdCl2(CH3CN)2 was applied for the alkoxycarbonylation various aryl
iodides and alcohols
Scheme 52 Palladiumthiourea-oxazoline catalyzed alkoxycarbonylation reaction
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
218
Haung and group (2005) has prepared silica-supported sulphur and phosphine
mixed bidentate palladium complex 4-thia-6-chlorohexyltrimethoxysilane was
immobilized on fumed silica followed by reacting with potassium diphenylphosphide
in tetrahydrofuran (THF) and then the reaction with palladium chloride in acetone
The polymeric palladium complex then explored for the carbonylation of aryl halide
with various nucleophiles such as alcohol and amine (Scheme 53) The developed
polymeric palladium complex was recovered and reused without loss of activity
Scheme 53 Si-S P-Pd(II) complex catalyzed carbonylation reactions
Watson et al (2008) reported carbonylation of aryl chlorides at ambient CO
pressure using Pd(dcpp) 2 HBF4 as a efficient catalyst (Scheme 54) The catalyst was
successfully used for aryl and heteroaryl chlorides in combination with variety of
aliphatic and aromatic alcohols The protocol was further employed for the synthesis
of various acid derivatives via carbonylation reactions
Scheme 54 Pd(dcpp) 2HBF4 catalyzed alkoxycarbonylation reaction
Synthesis of tertiary ester by palladium-catalyzed alkoxycarbonylation of aryl
bromides has been reported recently by Xin et al (2012) (Scheme 55) 110-Bis-
(diisopropylphosphino)ferrocene ligand (DiPrPF) applied for the alkoxycarbonylation
of aryl bromides with sodium alkoxide forming tertiary esters Different sodium
alkoxides were screened for the synthesis of verity of tertiary esters
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
219
Scheme 55 Palladium-catalyzed synthesis of tertiary esters
Xia and co-workers (2008) has developed a palladium on charcoal (PdC)
catalyzed protocol for the carbonylation of variety of substrates They demonstrated
phosphine free protocol for the alkoxycarbonylation and phenoxycarbonylation of aryl
iodides using alcohols or phenols as nucleophiles and carbonylative Sonogashira
coupling reaction of aryl iodides with terminal alkynes (Scheme 56) The catalytic
system was applied for the synthesis of variety of esters and alkynyl ketones
Scheme 56 PdC catalyzed carbonylation reactions
Robertson and co-workers (2012) have synthesized polymer-supported tri-
alkyl phosphine ligand this trialkyl phosphine ligands was loaded with palladium and
supported on Merrifield resin This supported complex was then explored for
alkoxycarbonylation reaction and SuzukindashMiyaura coupling reactions (Scheme 57)
Range of carbonyl compounds including aliphaticaromatic esters and substituted
biaryl ketones were synthesized with ease The catalyst was also recycled up to three
consecutive cycles
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
220
Scheme 57 Palladium-catalyzed alkoxycarbonylation of alcoholsphenols
Recently Siva Prasad and Satyanarayana (2013) have prepared PdFe3O4
catalyst and applied for carbonylation of aryl halide with variety of alcohols (Scheme
58) The catalyst was recovered with the simple application of an external magnetic
field due to paramagnetic behaviour of Fe3O4 catalyst was easily separated and was
recycled up to five consecutive cycles
Scheme 58 PdFe3O4 catalyzed alkoxycarbonylation of aryl halides
Palladium-catalyzed carbonylation of phenols (phenoxycarbonylation) has
been developed by Wu et al (2012) (Scheme 59) Activation of the phenols occurs
through in situ generation of aryl nonaflates Both electron-donating and electron-
withdrawing substituents on phenol ring were well tolerated for phenoxycarbonylation
under the developed catalytic system
Scheme 59 [Pd(cinnamyl)Cl2] catalyzed phenoxycarbonylation
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
221
For the first time CO free approach for alkoxycarbonylation of aryl halides
was developed by Yamane and co-workers (2011) (Scheme 510) The molybdenum
carbonyl complexes [Mo(CO)6] act as the catalyst and the source of carbon monoxide
(Scheme 510) The reaction was applied for the multi-acylation of polyols and
synthesis of a variety of carboxylic acid derivatives
Scheme 510 Mo(CO)6-mediated alkoxycarbonylation of aryl halides with alcohols
Another CO free approach using alkyl formates was demonstrated by Beller
and group (2010) (Scheme 511) The reaction was carried out by using palladium(II)
acetaten-butylbis(1-adamantly)phosphine (L1) and DBU as base in NMP as a
solvent The protocol was applied for alkoxycarbonylation of various aryl chlorides
Scheme 511 CO free alkoxycarbonylation of aryl halides using aryl formates
Recently for the first time Zhang et al (2012) reported transition-metal-free
alkoxycarbonylation of aryl halides using Potassium tert-butoxide (KOtBu) and high
pressure of carbon monoxide (Scheme 512) Moreover electron paramagnetic
resonance (EPR) experiments were conducted to study the reaction mechanism which
revealed participation of radicals in the reaction system The major drawback of the
protocol was the use of benzene as a solvent requirement of very high CO pressure
and of longer reaction time
Scheme 512 Transition metal free alkoxycarbonylation of aryl halides
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
222
512 AMINOCARBONYLATION REACTION
An aminocarbonylation reaction refers to the carbonylation reaction in which amine
as a nucleophile reacts with aryl halide in the presence of carbon monoxide which
gives amide as a major product Depending upon the amine employed one can get a
variety of aromatic aliphatic and heterocyclic amides
Gee and co-workers (2006) showed the application of microfluidic device for
the rapid synthesis of amides via aminocarbonylation reactions (Scheme 513) They
showed application of microstructure device for first time to perform a gas-liquid
carbonylation reaction The reaction was carriedout on a glass-fabricated Microchip
using Pd(dppp)Cl2 as a catalyst
Scheme 513 Pd phosphine catalyzed aminocarbonylation reaction
Whittall and group (2007) explored Bedford-type palladacycle complex (1) in
combination with Bis(diphenylphosphino)ferrocene ligand (dppf) for the
aminocarbonylation and alkoxycarbonylation reactions (Scheme 514) This palladium
complex acted as highly active catalysts for both the reactions showing compatibility
with a wide variety of substrates
Scheme 514 Palladacycle complex catalyzed carbonylation reactions
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
223
A method for the aminocarbonylation of aryl bromide using xantphos as a
ligand has been reported recently by Buchwald and group (2008) (Scheme 515) The
method was effective for the direct synthesis of Weinreb amides 1ry
and 2ry
benzamides and methyl esters from the corresponding aryl bromides at atmospheric
pressure of CO The catalytic system was applied for variety of substrates providing
good to excellent yield of desired carbonylated products In addition a putative
catalytic intermediate (Xantphos)Pd(Br)benzoyl was synthesized and an X-ray crystal
structure was also provided This crystal structure revealed that this species possess a
cis-coordinated palladium centre
Scheme 515 Pd(OAc)2 Xantphos catalyzed aminocarbonylation reaction
Kumar et al (2004) demonstrated the aminocarbonylation of unprotected
indoles with different N- and O-nucleophiles using Pddppf as a catalyst (Scheme
516) Various indole carboxylic acid derivatives were accessible in excellent yield
For example aminocarbonylation of 4- 5- 6- or 7-bromoindole with arylethyl
piperazines provided a direct one-step synthesis for CNS active amphetamine
derivatives
Scheme 516 Pd dppf catalyzed aminocarbonylation of bromoindoles
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
224
Pd-catalyzed aminocarbonylation of heteroaryl halides using monodentate
ligand di-tert-butylphosphinoferrocene tetrafluoroborate has been developed by
Senanayake and co-workers (2009) (Scheme 517) The developed protocol was
successfully applied for the preparation of a series of heteroaromatic amide
derivatives in good yields
Scheme 517 Pd P(Fc)(t-Bu)2HBF4 catalyzed aminocarbonylation
Kollar and group reported (2007) Pd(OAc)2PPh3 catalyzed protocol for the
aminocarbonylation of heteroaryl iodides (Scheme 518) Various primary and
secondary amines including amino acid methyl esters were used as nucleophiles in
palladium-catalyzed aminocarbonylation of 2-iodopyridine 3-iodopyridine and
iodopyrazine The reaction works well with variety of nucleophiles having electron-
rich and electron-poor substituents
Scheme 518 Pd(OAc)2PPh3 catalyzed aminocarbonylation of heteroaryl iodides
Well-dispersed palladium(0) nanoparticles stabilized with phosphonium based
ionic liquid were synthesized and explored for the aminocarbonylation reaction of aryl
iodide in ionic liquid media by Zhu et al (2011) (Scheme 519) Different derivatives
of amides were synthesized from corresponding aryl halide and aryl amines
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
225
Scheme 519 Pd(0) nanoparticles catalyzed aminocarbonylation of heteroaryl iodides
An efficient methodology for the synthesis of amides via palladium-catalyzed
aminocarbonylation of aryl iodides was reported by Castill et al (2012) using the
bulky cis-12-bis[(di-tert-butylphosphino)methyl]cyclohexane ligand under
atmospheric pressure of carbon monoxide (Scheme 520) A broad range of iodoaryl
derivatives with different amine were screened
Scheme 520 PdP(Fc)(t-Bu)2 catalyzed aminocarbonylation
Recently Dang et al (2012) reported an aminocarbonylation of aryl iodides
using palladium nanoparticles supported on MOF-5 (metal-organic frameworks)
(Scheme 521) Various palladium supported catalysts using different solid supports
like Silica Al2O3 and MOF has been synthesized but palladium catalyst supported on
MOF-5 provided better results The developed catalytic system worked under
atmospheric pressure of carbon monoxide and was applied for the synthesis of various
substituted amides furthermore the catalyst was also recycled
Scheme 521 Pd nanoparticles supported on MOF-5 catalyzed aminocarbonylation
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
226
Begouin et al (2009) have demonstrated that [Mo(CO)6] can be successfully
used as a CO source in aminocarbonylation reactions (Scheme 522) Range of aryl
and heteroaryl substrates either halides or amines were tested for the
aminocarbonylation reactions
Scheme 522 CO free aminocarbonylation using Mo(CO)6
Literature reports reveals that alkoxyphenoxycarbonylation and
aminocarbonylation were well explored by using a variety of homogeneous Pd
complexes with different air and moisture sensitive NP containing ligands which had
problems in the recovery and recycling of the expensive palladium catalyst Also there
is no general protocol developed which could efficiently catalyze the carbonylation of
aryl iodide with different nucleophiles such as phenols alcohols and amines Thus
there is a need to develop a chemically well defined air stable single-component Pd-
complex which can efficiently catalyze different carbonylation reactions including
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
Considering this immobilization strategies for metal complex wherein the
metal is coordinated to a ligand grafted on to an inorganic or organic support has been
developed (Lu and Toy 2009 Byun and Lee 2004) Ionic liquids containing metal
ions are considered as catalytic precursors and they can be immobilized on solid
support thus facilitates the reuse of catalyst finding a promising use in organic
transformations (Doorslaer et al 2010 Sasaki et al 2005 Sasaki et al 2008 Zhong
et al 2006) In this regards immobilized palladium metal ion containing ionic liquid
[ImmPd-IL] is explored for alkoxycarbonylation phenoxycarbonylation and
aminocarbonylation reactions
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
227
52 RESULTS AND DISCUSSION
Considering the objective of the development of efficient phosphine free
heterogeneous and recyclable protocol immobilized palladium metal ion containing
ionic liquid (ImmPd-IL) was used as a common catalyst for alkoxycarbonylation
phenoxycarbonylation and aminocarbonylation reactions (Scheme 523) The
methodology offers synthesis of various carbonyl compounds including aliphatic
esters aromatic esters and amides from corresponding alcohol phenol and amines
The protocol is advantageous due to the ease in handling of the catalyst and simple
workup procedure and effective catalyst recyclability
Scheme 523 ImmPd-IL catalyzed different carbonylation reactions
521 Preparation of immobilized palladium metal ion containing ionic liquid
(ImmPd-IL) catalyst
Preparation of immobilized palladium metal ion-containing ionic liquid catalyst
(ImmPd-IL) is a two step process (Scheme 524) The first step involves the anchoring
of ionic liquid on to a silica support which gives immobilized ionic liquid (Imm-IL)
In a second step the synthesized Imm-IL is loaded with palladium metal ion (PdCl2)
which results immobilized palladium ion-containing ionic liquid (ImmPd-IL)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
228
Scheme 524 Preparation of immobilized ImmPd-IL
522 ALKOXYCARBONYLATION REACTIONS
Initially alkoxycarbonylation reaction of aryl iodide with aliphatic alcohols was
studied (Scheme 525)
Scheme 525 ImmPd-IL catalyzed alkoxycarbonylation of aryl iodides with alcohols
The effect of various reaction parameters like base temperature time and CO
pressure using ImmPd-IL as a catalyst was studied (Table 51) The reaction of
iodobenzene with methyl alcohol in presence of CO was chosen as model reaction for
the optimization To study the role of base the reaction was carried out using various
inorganic bases like K2CO3 (80) Cs2CO3 (79) and organic bases like DBU (85)
Et3N (96) (Table 51 entries 1-4) As Et3N provided maximum yield of the methyl
benzoate it was used for further study No profound increase in the yield of methyl
benzoate was observed when the reaction temperature was increased from 80 to 100
degC therefore 80 degC was considered as an optimum reaction temperature for further
studies (Table 51 entries 4-5) When CO pressure was increased from 73 psi to 145
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
229
psi equivalent yield of the desired product was observed (Table 51 entry 6) Hence
the finalized reaction conditions were base Et3N temperature 80 degC solvent
alcohol (also as a nucleophile) time 3 h and 73 psi of CO pressure
Table 51 Effect of bases temperature and time on ImmPd-IL catalyzed
alkoxycarbonylation reactiona
Entry Base Temp
(degC)
CO Press
(psi)
Yield
()b
1 K2CO3 80 73 80
2 Cs2CO3 80 73 79
3 DBU 80 73 85
4 Et3N 80 73 96
5 Et3N 100 73 97
6 Et3N 100 145 98
a Reaction conditions
Iodobenzene (2 mmol) methyl alcohol (5 mL) ImmPd-IL (2
mol ) Et3N (3 mmol) 73 psi CO press Temp (80 degC) Time (3 h) b Yield based on GC analysis
These optimized reaction parameters were then successfully applied to variety
of aryl iodides with different alcohols (Table 52) Model reaction of iodobenzene
with methyl alcohol provided 94 isolated yield of methyl benzoate (Table 52 entry
1) Ethyl alcohol and benzyl alcohol also reacts efficiently with iodobenzene
providing 95 and 89 yield of ethyl benzoate and benzyl benzoate respectively
(Table 52 entries 1-3) The substituted iodobenzene derivatives 4-iodoaniline and 4-
iodophenol furnished 80 and 75 yield of the methyl 4-aminobenzoate and methyl
4-hydroxybenzoate respectively (Table 52 entries 4-5) 4-Acetyliodobenzene reacts
with ethanol and provided 81 yield of ethyl-4-acetylbenzoate (Table 52 entry 6)
Iodonaphthalene furnished 79 yield of methyl 2-naphthoate (Table 52 entry 7)
whereas 1-iodo-4-nitrobenzene efficiently reacts with methyl alcohol furnishing a
moderate yield (70) of methyl 4-nitrobenzoate (Table 52 entry 8)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
230
Table 52 ImmPd-IL catalyzed alkoxycarbonylation of aryl iodides with various
alcoholsa
Entry Aryl iodide Alcohol Product Yield
()b
1
MeOH
94
2
EtOH
95
3
89
4
MeOH
80
5
MeOH
75
6
EtOH
81
7
MeOH
79
8
MeOH
70
a Reaction conditions aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
Et3N (3 mmol) 73 psi CO press Temp (80 degC) Time (3 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
231
It is believed that the supported palladium metal leaches out from the solid
support and goes into the solution at higher temperature and the reaction was
catalyzed mainly by dissolved palladium species (Tambade et al 2008) Hence to
determine whether the reaction was catalyzed due to the ImmPd-IL complex or a
leached palladium metal that comes off the support at higher temperature during the
reaction a hot filtration test was performed (Lempers 1998 Zhao 2009)
Hot filtration experiment was performed for the alkoxycarbonylation of
iodobenzene with benzyl alcohol using ImmPd-IL catalyst Reaction was carried out
at 80 oC during reaction the ImmPd-IL complex catalyst was filtered off and the
filtrate without addition of catalyst was allowed to react further It was found that no
further reaction occurred after this hot filtration procedure hence this experimental
finding suggests there is no palladium leaching from the ImmPd-IL complex during
the progress of a reaction In addition to reconfirm this observation ICP-AES
analysis of the reaction mixture was carried out after 15 and 3 h which revealed a
below detectable level (below 001 ppm) of palladium in solution
It is also important to study the separation and recyclability of the catalyst
The ImmPd-IL catalyst was separated from the reaction mixture by a simple filtration
procedure and was found to be effective up to four consecutive recycles for
methoxycarbonylation reaction (Figure 52) No significant decrease in yield during
recycle study was observed
Figure 52 Recycle study of ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
232
523 PHENOXYCARBONYLATION REACTIONS
ImmPd-IL catalytic system was further explored for the phenoxycarbonylation of aryl
iodides with various phenols to yield corresponding phenyl esters and it was observed
that corresponding products were obtained in good to excellent yields (Scheme 526)
Scheme 526 Phenoxycarbonylation of aryl iodides with phenols using ImmPd-IL
For the optimization of reaction the influence of critical parameters such as
solvent base and CO pressure on the carbonylation of iodobenzene with phenol as a
nucleophile have been investigated (Table 53 entries 1-8)
Table 53 Effect of solvents and bases on ImmPd-IL catalyzed Phenoxycarbonylation
reactiona
Entry Solvent Base CO Press
(psi)
Yield
()b
1 DMF Et3N 145 56
2 14-Dioxane Et3N 145 62
3
Water Et3N 145 0
4 Toluene Et3N 145 90
5 Toluene DBU 145 80
6 Toluene K2CO3 145 66
7 Toluene Cs2CO3 145 72
8 Toluene Et3N 73 85
a Reaction conditions Iodobenzene (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
base (3 mmol) solvent (10 mL) 8 h at 100 degC b Yield based on GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
233
The role of various solvents such as NN-dimethyl formamide (DMF) (56)
14-dioxane (62) water (0) and toluene (90) was studied (Table 53 entries 1-
4) It was observed that the reaction was more favourable using toluene as a solvent
and provided 90 yield of phenyl benzoate (Table 54 entry 4) Various screened
organic and inorganic bases (K2CO3 Cs2CO3 DBU and Et3N) showed Et3N (90) to
be superior base at 100 degC (Table 53 entries 4-7) The initial reaction was carried out
at 145 psi CO pressure which provided 90 yield of phenyl benzoate a further
decrease in CO pressure up to 73 psi decreased the yield of the phenyl benzoate
(Table 53 entry 8) Hence the finalized reaction parameters were Et3N as a base in
toluene CO 73 psi at 100 degC for 8 h
These finalized reaction parameters were then applied for the
phenoxycarbonylation of different aryl halides and phenols having different electron-
donating or withdrawing groups (Table 54 entries 1-7) Iodobenzene reacts
efficiently with phenol within 8 h providing 89 isolated yield of phenyl benzoate
(Table 54 entry 1) Substituted phenols such as p-cresol p-methoxyphenol and p-
chlorophenol reacts with iodobenzene furnishing good to excellent yields of the
corresponding product (Table 54 entries 2-4) The substituted iodobenzene
derivative reacts with phenol and provided 86 yields of phenyl 4-methoxybenzoate
(Table 54 entry 5) 1-Iodo-4-nitrobenzene furnished moderate yield (59) of the
phenyl 4-nitrobenzoate (Table 54 entry 6) Reaction of 1-iodonaphthalene with
phenol provided 75 yield of phenyl 1-naphthoate (Table 54 entry 7)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
234
Table 54 ImmPd-IL catalyzed Phenoxycarbonylation of aryl iodides with various
phenolsa
Entry Aryl iodide Phenol Product Yield
()b
1
89
2
90
3
88
4
84
5
86
6
59
7
75
a Reaction conditions aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
235
524 AMINOCARBONYLATION REACTIONS
The scope of ImmPd-IL was further extended for aminocarbonylation of aryl iodides
with a range of aliphatic aromatic primary and secondary amines (Scheme 527)
Scheme 527 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with amines
The reaction of iodobenzene with aniline was selected as a model reaction for
optimization Various solvents such as DMF (80) water (70) anisole (60) and
toluene (92) were screened for the reaction (ionic liquid was insoluble in water as it
was immobilised on solid support) but toluene was found to be the best solvent
(Table 55 entries 1-4) Screening of a variety of bases showed Et3N (90) to be
superior at 100 degC (Table 55 entries 4-6) Further reaction was optimized with
respect to various reaction parameters including temperature time and CO pressure
and the best optimized reaction conditions were then applied for the
aminocarbonylation of a variety of iodoaryls and amines
Table 55 Effect of solvents and bases on ImmPd-IL catalyzed aminocarbonylation
reactiona
Entry Solvent Base Yield
()b
1 DMF Et3N 80
2 Water Et3N 70
3
Anisole Et3N 60
4 Toluene Et3N 92
5 Toluene Na2CO3 52
6 Toluene K2CO3 57
a Reaction conditions
Iodobenzene (1 mmol) aniline (2 mmol) ImmPd-IL (2 mol)
Et3N (3 mmol) Toluene (10 mL) 8 h at 100 degC 145 psi CO pressure b Yield based GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
236
The optimized reaction parameters were then applied for the
aminocarbonylation of substituted aryl halides and aromatic amines The model
reaction of iodobenzene with aniline provided 90 isolated yield of N-
phenylbenzamide under optimized reaction conditions (Table 56 entry 1) 4-
iodoanisole furnished 85 yield of 4-methoxy-N-phenylbenzamide (Table 56 entries
2) 4-methoxyaniline reacts with iodobenzene and provided 88 yield of N-(4-
methoxyphenyl)benzamide (Table 56 entry 3) 3-(Trifluoromethyl)aniline provided a
moderate yield of the expected product (Table 56 entry 4)
There after various primary aliphatic amines were screened for the
aminocarbonylation Cyclohexyl amine efficiently reacts with iodobenzene and 2-
iodonaphthalene and provided 92 and 80 yield of N-cyclohexylbenzamide and N-
cyclohexyl-1-naphthamide respectively (Table 56 entries 5-6) Reaction of
iodobenzene and 4-iodo acetophenone with tert-butyl amine furnished 92 and 89
yield of respective amide (Table 56 entry 7-8) Benzyl amine provided excellent
yields of N-benzylbenzamide (Table 56 entry 9) To our delight aromatic secondary
amine such as N-methyl aniline efficiently reacts with iodobenzene furnishing 91
yield of N-methyl-N-phenylbenzamide (Table 56 entry 10)
Table 56 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with various
aliphatic and aromatic primary amines and secondary aminesa
Entry Aryl iodide Amine Product Yield
()b
1
90
2
85
3
88
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
237
4
75
5
92
6
80
7
92
8
89
9
90
10
91
a Reaction conditions aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
238
53 CONCLUSION
The present study reports an efficient and common protocol for
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
by using a well-defined heterogeneous ImmPd-IL complex as a versatile
catalyst
The ease of preparation of the complex indefinite shelf life stability towards
air makes it an ideal complex for the above transformations
The reaction system was optimized with respect to various reaction parameters
and applied for carbonylation of a range of aryl iodides with different types of
alcohols phenols and amines furnishing good to excellent yields of the
corresponding products
The present protocol provided high yields of the desired products for all
carbonylation protocols
All the reactions were carried out under milder operating conditions
Catalytic system showed excellent activity and selectivity and effectively
recycled for four consecutive cycles
The leaching of the Pd metal was examined by hot filteration test and ICP-
AES analysis which revels no significant leaching of the palladium occurs
during the reaction
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
239
54 EXPERIMENTAL
541 Materials and Method N-methylimidazole (99+) and 3-trimethoxysilylpropyl
chloride (97+) were purchased from Aldrich PdCl2 was purchased from WAKO
Anhydrous redistilled 1-methylimidazole (99+) was purchased from Aldrich All
the dehydrated solvents were obtained from WAKO Aerosil 300 (300 m2g) was
obtained from Japan Aerosil Co and calcined at 573 K for 15 h in air and 30 min in
vacuum before use as a support The procedures for catalyst preparation were based
previous publication (Sasaki et al 2008) with some modifications Prepared catalyst
was characterized by using IR and elemental analysis and loading of the catalyst was
calculated by XRF measurements (SEA-2010 Seiko Electronic Industrial Co) The
XPS of ImmPd-IL was measured using a PHI5000 Versa Probe with monochromatic
focused (100 times 100 μm) Al Kα X-ray radiation (15 kV 30 mA) and dual beam
neutralization using a combination of argon ion gun and electron irradiation
The products are well-known in the literature and were compared with
authentic samples Progress of the reaction was monitored by gas chromatography
(GC) Gas chromatography analysis was carried out on Perkin-Elmer Clarus 400 GC
equipped flame ionization detector with a capillary column (Elite-1 30 m times 032 mm
times 025 μm) using the external standard method A GCMS-QP 2010 instrument (Rtx-
17 30 m times 25 mm id film thickness 025 μm df) (column flow 2 mL minminus1
80-240
degC at 10 degCmin rise) The 1H NMR spectra were recorded on Varian-300 MHz FT-
NMR spectrometer in CDCl3 using TMS as the internal standard The 13
C NMR
spectra were recorded with a JEOL FT-NMR model-AL300 (75 MHz) spectrometer
in CDCl3 Chemical shifts are reported in parts per million (δ) relative to
tetramethylsilane as the internal standard J (coupling constant) values were reported
in hertz (Hz) Proton splitting patterns are described as s (singlet) d (doublet) t
(triplet) and m (multiplet)
542 Preparation of immobilized palladium metal ion-containing ionic liquid
1-methyl-3-(3-trimethoxysilylpropyl) imidazolium chloride was synthesized by
mixing N-methylimidazole (0690 mol) and 3-trimethoxysilylpropyl chloride (0690
mol) in a dry 300 mL flask under a nitrogen atmosphere and refluxed for 48 h After
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
240
cooling to room temperature the resultant liquid was washed by dehydrated ethyl
acetate five times and dried at room temperature under reduced pressure for 48 h
The obtained compound was stored at 253 K under dry nitrogen Silica (Aerosil 300
surface area 300 m2g calcined at 573 K for 15 h in air) and 1-methyl-3-(3-
trimethoxysilylpropyl) imidazolium chloride (weight ratio 11) was dispersed in
dehydrated toluene and the mixture was refluxed for 48 h under nitrogen
After the reflux toluene was removed by filtration using glass filter and the
excess ionic liquid was removed by washing with dichloromethane several times The
resultant solid is denoted as Imm-IL In the next step Imm-IL was added to an
acetonitrile solution of PdCl2 and refluxed for 24 h Acetonitrile and excess of metal
chloride were removed by washing acetone using glass filter several times The metal
loading of ImmPd-IL was 34 wt as determined by XRF measurements (SEA-2010
Seiko Electronic Industrial Co)
543 General Experimental Procedure for Alkoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
and Et3N (3 mmol) were added The autoclave was closed purged three times with
carbon monoxide pressurized with 73 psi of CO and heated at 80 degC for 3 h After
completion of the reaction the reactor was cooled to room temperature and the
remaining CO gas was carefully vented and the reactor was opened The reactor
vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to remove any traces of
product and catalyst if present The catalyst was filtered and the reaction mixture was
evaporated under vacuum The residue obtained was purified by column
chromatography (silica gel 60-120 mesh petroleum etherethyl acetate 9505) to
afford the desired product
544 General Experimental Procedure for Recycling of ImmPd-IL
After completion of reaction the reaction mixture was cooled to room temperature
and the catalyst was collected by filtration The filtered catalyst was washed with
distilled water (3 times 5 mL) and methanol (3 times 5 mL) to remove all traces of product or
reactant present The filtered catalyst was then dried under reduced pressure The
dried catalyst was then used for the alkoxycarbonylation reaction of iodobenzene with
methanol for the recyclability experiment
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
241
545 XPS spectra of ImmPd-IL catalyst
The XPS spectra of ImmPd-IL shows that two peaks at 337 and 3424 eV for fresh
Imm-Pd are assigned as 3d52 and 3d32 for Pd2+
species respectively (Figure 53)
For the first recycle sample new peaks appear at 3342 and 3392 eV which are
assigned as 3d52 and 3d32 for Pd(0) species respectively indicating that the
reduction of the Pd species takes place during the catalytic reaction From the
spectrum of the fourth recycle sample it is obvious that the component of Pd2+
is
decreasing upon recycles although the component of Pd(0) remains constant
Figure 53 XPS of Pd 3d and Cl 2p for ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
242
546 General Experimental Procedure for Phenoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h After the completion of the reaction the reactor was cooled to room
temperature and the remaining CO gas was carefully vented and the reactor was
opened The reactor vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to
remove any traces of product and catalyst if present The catalyst was filtered and the
reaction mixture was evaporated under vacuum The residue obtained was purified by
column chromatography (silica gel 60-120 mesh petroleum etherethyl acetate
9505) to afford the desired product
547 General Experimental Procedure for Aminocarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol)
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h (the ensuing procedure is the same as that discussed above for the phenoxy
carbonylation reaction)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
243
55 SPECTRAL DATA
Methyl benzoate
GC-MS (EI 70 eV) mz () = 136 [M+] (35) 105 (100) 77 (55) 51 (20)
Ethyl benzoate
GC-MS (EI 70 eV) mz () = 150 [M+] (21) 122 (30) 105 (100) 77 (55)
Benzyl benzoate
1H NMR (300 MHz CDCl3) δ 804-808 (m 2H ArH) 731-752 (m 8H
ArH) 53 (s 2H CH2) 13
C NMR (75 MHz CDCl3) δ 16648 13619 13312
13025 12981 12870 12848 12834 12827 6677
Methyl 4-aminobenzoate
1H NMR (300 MHz CDCl3) δ 783 (d 2H J = 87 Hz ArH) 661 (d 2H J =
87 Hz ArH) 414 (br s 2H NH2) 383 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16724 15107 13151 11927 11368 5155
Methyl 4-hydroxybenzoate
1H NMR (300 MHz CDCl3) δ 794 (d 2H J = 87 Hz ArH) 722 (br s 1H
OH) 690 (d 2H J = 87 Hz ArH) 390 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16778 16055 13203 12201 11539 5223
Methyl 2-naphthoate
1H NMR (300 MHz CDCl3) δ 850 (s 1H ArH) 798-805 (m 2H ArH)
773 (t 2H J = 84 Hz ArH) 754-761 (m 2H ArH) 396 (s 3H OCH3) 13
C NMR
(75 MHz CDCl3) δ 16685 13634 13087 13082 13013 12938 12901 12778
12720 12632 12260 5235
Ethyl 4-acetylbenzoate
1H NMR (300 MHz CDCl3) δ 814-811 (m 2H ArH) 802-799 (m 2H
ArH) 441 (q 2H J = 69Hz CH2CH3) 265 (s 3H COCH3) 142 (t 3H J = 69Hz
CH2CH3) 13
C NMR (75 MHz CDCl3) δ 19766 16576 14012 13424 12977
12817 6147 2689 1427
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
244
Phenyl benzoate
1H NMR (300 MHz CDCl3) δ 825-822 (m 2H ArH) 768-863 (m 1H
ArH) 756-742 (m 4H ArH) 732-723 (m 3H ArH) 13
C NMR (75 MHz CDCl3)
δ 16590 15103 13365 13023 12964 12956 12864 12596 1217 GC-MS (EI
70 eV) mz () = 198 [M+] (9) 105 (100) 77 (40) 51 (9)
phenyl 4-nitrobenzoate
1H NMR (300 MHz CDCl3) δ = 837 (s 4H ArH) 723-748 (m 5H ArH)
13C NMR (75 MHz CDCl3) δ = 16347 15110 15072 13517 13144 12984
12657 12388 12157 GC-MS (EI 70 eV) mz () = 243 [M+] (15) 150 (100) 77
(10)
phenyl 4-methoxybenzoate
1H NMR (300 MHz CDCl3) δ = 814-816 (d 2H J = 87Hz ArH) 720-741
(m 5H ArH) 696-698 (d 2H J = 87 Hz ArH) 386 (s 3H OCH3) GC-MS (EI
70 eV) mz () = 228 [M+] (5) 135 (100) 107 (9) 77 (20)
phenyl-1-naphthoate
1H NMR (300 MHz CDCl3) δ = 904 (d 1H ArH) 845 (d1H ArH) 804
(d 1H ArH) 788 (d 1H ArH) 742-763 (m 5H ArH) 726-728 (m 3H ArH)
13C NMR (70 MHz CDCl3) δ = 16594 15118 13440 13408 13182 13134
12968 12883 12850 12829 12650 12605 12590 12465 12203
N-phenylbenzamide
1H NMR (300 MHz CDCl3) δ 798 (br s 1H NH) 787-883 (m 2H ArH)
763 (d 2H J = 76 Hz ArH) 732-753 (m 5H ArH) 716 (t 1H J = 73 ArH) 13
C
NMR (75 MHz CDCl3) δ 16590 13798 13502 13186 12911 12880 12709
12461 12032 ppm GC-MS mz () = 197 [M+] (42) 105 (100) 77 (54)
4-acetyl-N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 806 (d 2H J = 84Hz ArH) 777 (d 2H J
= 84Hz ArH) 601 (br s 1H NH) 393 (s 3H CH3) 148 (s 9H) 13
C NMR (75
MHz CDCl3) δ 16640 16605 13987 13234 12979 12682 5239 5195 2883
ppm GC-MS (EI 70 eV) mz () = 219 [M+] (20) 186 (22) 148 (100) 130 (30) 76
(20)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
218
Haung and group (2005) has prepared silica-supported sulphur and phosphine
mixed bidentate palladium complex 4-thia-6-chlorohexyltrimethoxysilane was
immobilized on fumed silica followed by reacting with potassium diphenylphosphide
in tetrahydrofuran (THF) and then the reaction with palladium chloride in acetone
The polymeric palladium complex then explored for the carbonylation of aryl halide
with various nucleophiles such as alcohol and amine (Scheme 53) The developed
polymeric palladium complex was recovered and reused without loss of activity
Scheme 53 Si-S P-Pd(II) complex catalyzed carbonylation reactions
Watson et al (2008) reported carbonylation of aryl chlorides at ambient CO
pressure using Pd(dcpp) 2 HBF4 as a efficient catalyst (Scheme 54) The catalyst was
successfully used for aryl and heteroaryl chlorides in combination with variety of
aliphatic and aromatic alcohols The protocol was further employed for the synthesis
of various acid derivatives via carbonylation reactions
Scheme 54 Pd(dcpp) 2HBF4 catalyzed alkoxycarbonylation reaction
Synthesis of tertiary ester by palladium-catalyzed alkoxycarbonylation of aryl
bromides has been reported recently by Xin et al (2012) (Scheme 55) 110-Bis-
(diisopropylphosphino)ferrocene ligand (DiPrPF) applied for the alkoxycarbonylation
of aryl bromides with sodium alkoxide forming tertiary esters Different sodium
alkoxides were screened for the synthesis of verity of tertiary esters
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
219
Scheme 55 Palladium-catalyzed synthesis of tertiary esters
Xia and co-workers (2008) has developed a palladium on charcoal (PdC)
catalyzed protocol for the carbonylation of variety of substrates They demonstrated
phosphine free protocol for the alkoxycarbonylation and phenoxycarbonylation of aryl
iodides using alcohols or phenols as nucleophiles and carbonylative Sonogashira
coupling reaction of aryl iodides with terminal alkynes (Scheme 56) The catalytic
system was applied for the synthesis of variety of esters and alkynyl ketones
Scheme 56 PdC catalyzed carbonylation reactions
Robertson and co-workers (2012) have synthesized polymer-supported tri-
alkyl phosphine ligand this trialkyl phosphine ligands was loaded with palladium and
supported on Merrifield resin This supported complex was then explored for
alkoxycarbonylation reaction and SuzukindashMiyaura coupling reactions (Scheme 57)
Range of carbonyl compounds including aliphaticaromatic esters and substituted
biaryl ketones were synthesized with ease The catalyst was also recycled up to three
consecutive cycles
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
220
Scheme 57 Palladium-catalyzed alkoxycarbonylation of alcoholsphenols
Recently Siva Prasad and Satyanarayana (2013) have prepared PdFe3O4
catalyst and applied for carbonylation of aryl halide with variety of alcohols (Scheme
58) The catalyst was recovered with the simple application of an external magnetic
field due to paramagnetic behaviour of Fe3O4 catalyst was easily separated and was
recycled up to five consecutive cycles
Scheme 58 PdFe3O4 catalyzed alkoxycarbonylation of aryl halides
Palladium-catalyzed carbonylation of phenols (phenoxycarbonylation) has
been developed by Wu et al (2012) (Scheme 59) Activation of the phenols occurs
through in situ generation of aryl nonaflates Both electron-donating and electron-
withdrawing substituents on phenol ring were well tolerated for phenoxycarbonylation
under the developed catalytic system
Scheme 59 [Pd(cinnamyl)Cl2] catalyzed phenoxycarbonylation
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
221
For the first time CO free approach for alkoxycarbonylation of aryl halides
was developed by Yamane and co-workers (2011) (Scheme 510) The molybdenum
carbonyl complexes [Mo(CO)6] act as the catalyst and the source of carbon monoxide
(Scheme 510) The reaction was applied for the multi-acylation of polyols and
synthesis of a variety of carboxylic acid derivatives
Scheme 510 Mo(CO)6-mediated alkoxycarbonylation of aryl halides with alcohols
Another CO free approach using alkyl formates was demonstrated by Beller
and group (2010) (Scheme 511) The reaction was carried out by using palladium(II)
acetaten-butylbis(1-adamantly)phosphine (L1) and DBU as base in NMP as a
solvent The protocol was applied for alkoxycarbonylation of various aryl chlorides
Scheme 511 CO free alkoxycarbonylation of aryl halides using aryl formates
Recently for the first time Zhang et al (2012) reported transition-metal-free
alkoxycarbonylation of aryl halides using Potassium tert-butoxide (KOtBu) and high
pressure of carbon monoxide (Scheme 512) Moreover electron paramagnetic
resonance (EPR) experiments were conducted to study the reaction mechanism which
revealed participation of radicals in the reaction system The major drawback of the
protocol was the use of benzene as a solvent requirement of very high CO pressure
and of longer reaction time
Scheme 512 Transition metal free alkoxycarbonylation of aryl halides
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
222
512 AMINOCARBONYLATION REACTION
An aminocarbonylation reaction refers to the carbonylation reaction in which amine
as a nucleophile reacts with aryl halide in the presence of carbon monoxide which
gives amide as a major product Depending upon the amine employed one can get a
variety of aromatic aliphatic and heterocyclic amides
Gee and co-workers (2006) showed the application of microfluidic device for
the rapid synthesis of amides via aminocarbonylation reactions (Scheme 513) They
showed application of microstructure device for first time to perform a gas-liquid
carbonylation reaction The reaction was carriedout on a glass-fabricated Microchip
using Pd(dppp)Cl2 as a catalyst
Scheme 513 Pd phosphine catalyzed aminocarbonylation reaction
Whittall and group (2007) explored Bedford-type palladacycle complex (1) in
combination with Bis(diphenylphosphino)ferrocene ligand (dppf) for the
aminocarbonylation and alkoxycarbonylation reactions (Scheme 514) This palladium
complex acted as highly active catalysts for both the reactions showing compatibility
with a wide variety of substrates
Scheme 514 Palladacycle complex catalyzed carbonylation reactions
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
223
A method for the aminocarbonylation of aryl bromide using xantphos as a
ligand has been reported recently by Buchwald and group (2008) (Scheme 515) The
method was effective for the direct synthesis of Weinreb amides 1ry
and 2ry
benzamides and methyl esters from the corresponding aryl bromides at atmospheric
pressure of CO The catalytic system was applied for variety of substrates providing
good to excellent yield of desired carbonylated products In addition a putative
catalytic intermediate (Xantphos)Pd(Br)benzoyl was synthesized and an X-ray crystal
structure was also provided This crystal structure revealed that this species possess a
cis-coordinated palladium centre
Scheme 515 Pd(OAc)2 Xantphos catalyzed aminocarbonylation reaction
Kumar et al (2004) demonstrated the aminocarbonylation of unprotected
indoles with different N- and O-nucleophiles using Pddppf as a catalyst (Scheme
516) Various indole carboxylic acid derivatives were accessible in excellent yield
For example aminocarbonylation of 4- 5- 6- or 7-bromoindole with arylethyl
piperazines provided a direct one-step synthesis for CNS active amphetamine
derivatives
Scheme 516 Pd dppf catalyzed aminocarbonylation of bromoindoles
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
224
Pd-catalyzed aminocarbonylation of heteroaryl halides using monodentate
ligand di-tert-butylphosphinoferrocene tetrafluoroborate has been developed by
Senanayake and co-workers (2009) (Scheme 517) The developed protocol was
successfully applied for the preparation of a series of heteroaromatic amide
derivatives in good yields
Scheme 517 Pd P(Fc)(t-Bu)2HBF4 catalyzed aminocarbonylation
Kollar and group reported (2007) Pd(OAc)2PPh3 catalyzed protocol for the
aminocarbonylation of heteroaryl iodides (Scheme 518) Various primary and
secondary amines including amino acid methyl esters were used as nucleophiles in
palladium-catalyzed aminocarbonylation of 2-iodopyridine 3-iodopyridine and
iodopyrazine The reaction works well with variety of nucleophiles having electron-
rich and electron-poor substituents
Scheme 518 Pd(OAc)2PPh3 catalyzed aminocarbonylation of heteroaryl iodides
Well-dispersed palladium(0) nanoparticles stabilized with phosphonium based
ionic liquid were synthesized and explored for the aminocarbonylation reaction of aryl
iodide in ionic liquid media by Zhu et al (2011) (Scheme 519) Different derivatives
of amides were synthesized from corresponding aryl halide and aryl amines
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
225
Scheme 519 Pd(0) nanoparticles catalyzed aminocarbonylation of heteroaryl iodides
An efficient methodology for the synthesis of amides via palladium-catalyzed
aminocarbonylation of aryl iodides was reported by Castill et al (2012) using the
bulky cis-12-bis[(di-tert-butylphosphino)methyl]cyclohexane ligand under
atmospheric pressure of carbon monoxide (Scheme 520) A broad range of iodoaryl
derivatives with different amine were screened
Scheme 520 PdP(Fc)(t-Bu)2 catalyzed aminocarbonylation
Recently Dang et al (2012) reported an aminocarbonylation of aryl iodides
using palladium nanoparticles supported on MOF-5 (metal-organic frameworks)
(Scheme 521) Various palladium supported catalysts using different solid supports
like Silica Al2O3 and MOF has been synthesized but palladium catalyst supported on
MOF-5 provided better results The developed catalytic system worked under
atmospheric pressure of carbon monoxide and was applied for the synthesis of various
substituted amides furthermore the catalyst was also recycled
Scheme 521 Pd nanoparticles supported on MOF-5 catalyzed aminocarbonylation
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
226
Begouin et al (2009) have demonstrated that [Mo(CO)6] can be successfully
used as a CO source in aminocarbonylation reactions (Scheme 522) Range of aryl
and heteroaryl substrates either halides or amines were tested for the
aminocarbonylation reactions
Scheme 522 CO free aminocarbonylation using Mo(CO)6
Literature reports reveals that alkoxyphenoxycarbonylation and
aminocarbonylation were well explored by using a variety of homogeneous Pd
complexes with different air and moisture sensitive NP containing ligands which had
problems in the recovery and recycling of the expensive palladium catalyst Also there
is no general protocol developed which could efficiently catalyze the carbonylation of
aryl iodide with different nucleophiles such as phenols alcohols and amines Thus
there is a need to develop a chemically well defined air stable single-component Pd-
complex which can efficiently catalyze different carbonylation reactions including
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
Considering this immobilization strategies for metal complex wherein the
metal is coordinated to a ligand grafted on to an inorganic or organic support has been
developed (Lu and Toy 2009 Byun and Lee 2004) Ionic liquids containing metal
ions are considered as catalytic precursors and they can be immobilized on solid
support thus facilitates the reuse of catalyst finding a promising use in organic
transformations (Doorslaer et al 2010 Sasaki et al 2005 Sasaki et al 2008 Zhong
et al 2006) In this regards immobilized palladium metal ion containing ionic liquid
[ImmPd-IL] is explored for alkoxycarbonylation phenoxycarbonylation and
aminocarbonylation reactions
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
227
52 RESULTS AND DISCUSSION
Considering the objective of the development of efficient phosphine free
heterogeneous and recyclable protocol immobilized palladium metal ion containing
ionic liquid (ImmPd-IL) was used as a common catalyst for alkoxycarbonylation
phenoxycarbonylation and aminocarbonylation reactions (Scheme 523) The
methodology offers synthesis of various carbonyl compounds including aliphatic
esters aromatic esters and amides from corresponding alcohol phenol and amines
The protocol is advantageous due to the ease in handling of the catalyst and simple
workup procedure and effective catalyst recyclability
Scheme 523 ImmPd-IL catalyzed different carbonylation reactions
521 Preparation of immobilized palladium metal ion containing ionic liquid
(ImmPd-IL) catalyst
Preparation of immobilized palladium metal ion-containing ionic liquid catalyst
(ImmPd-IL) is a two step process (Scheme 524) The first step involves the anchoring
of ionic liquid on to a silica support which gives immobilized ionic liquid (Imm-IL)
In a second step the synthesized Imm-IL is loaded with palladium metal ion (PdCl2)
which results immobilized palladium ion-containing ionic liquid (ImmPd-IL)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
228
Scheme 524 Preparation of immobilized ImmPd-IL
522 ALKOXYCARBONYLATION REACTIONS
Initially alkoxycarbonylation reaction of aryl iodide with aliphatic alcohols was
studied (Scheme 525)
Scheme 525 ImmPd-IL catalyzed alkoxycarbonylation of aryl iodides with alcohols
The effect of various reaction parameters like base temperature time and CO
pressure using ImmPd-IL as a catalyst was studied (Table 51) The reaction of
iodobenzene with methyl alcohol in presence of CO was chosen as model reaction for
the optimization To study the role of base the reaction was carried out using various
inorganic bases like K2CO3 (80) Cs2CO3 (79) and organic bases like DBU (85)
Et3N (96) (Table 51 entries 1-4) As Et3N provided maximum yield of the methyl
benzoate it was used for further study No profound increase in the yield of methyl
benzoate was observed when the reaction temperature was increased from 80 to 100
degC therefore 80 degC was considered as an optimum reaction temperature for further
studies (Table 51 entries 4-5) When CO pressure was increased from 73 psi to 145
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
229
psi equivalent yield of the desired product was observed (Table 51 entry 6) Hence
the finalized reaction conditions were base Et3N temperature 80 degC solvent
alcohol (also as a nucleophile) time 3 h and 73 psi of CO pressure
Table 51 Effect of bases temperature and time on ImmPd-IL catalyzed
alkoxycarbonylation reactiona
Entry Base Temp
(degC)
CO Press
(psi)
Yield
()b
1 K2CO3 80 73 80
2 Cs2CO3 80 73 79
3 DBU 80 73 85
4 Et3N 80 73 96
5 Et3N 100 73 97
6 Et3N 100 145 98
a Reaction conditions
Iodobenzene (2 mmol) methyl alcohol (5 mL) ImmPd-IL (2
mol ) Et3N (3 mmol) 73 psi CO press Temp (80 degC) Time (3 h) b Yield based on GC analysis
These optimized reaction parameters were then successfully applied to variety
of aryl iodides with different alcohols (Table 52) Model reaction of iodobenzene
with methyl alcohol provided 94 isolated yield of methyl benzoate (Table 52 entry
1) Ethyl alcohol and benzyl alcohol also reacts efficiently with iodobenzene
providing 95 and 89 yield of ethyl benzoate and benzyl benzoate respectively
(Table 52 entries 1-3) The substituted iodobenzene derivatives 4-iodoaniline and 4-
iodophenol furnished 80 and 75 yield of the methyl 4-aminobenzoate and methyl
4-hydroxybenzoate respectively (Table 52 entries 4-5) 4-Acetyliodobenzene reacts
with ethanol and provided 81 yield of ethyl-4-acetylbenzoate (Table 52 entry 6)
Iodonaphthalene furnished 79 yield of methyl 2-naphthoate (Table 52 entry 7)
whereas 1-iodo-4-nitrobenzene efficiently reacts with methyl alcohol furnishing a
moderate yield (70) of methyl 4-nitrobenzoate (Table 52 entry 8)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
230
Table 52 ImmPd-IL catalyzed alkoxycarbonylation of aryl iodides with various
alcoholsa
Entry Aryl iodide Alcohol Product Yield
()b
1
MeOH
94
2
EtOH
95
3
89
4
MeOH
80
5
MeOH
75
6
EtOH
81
7
MeOH
79
8
MeOH
70
a Reaction conditions aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
Et3N (3 mmol) 73 psi CO press Temp (80 degC) Time (3 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
231
It is believed that the supported palladium metal leaches out from the solid
support and goes into the solution at higher temperature and the reaction was
catalyzed mainly by dissolved palladium species (Tambade et al 2008) Hence to
determine whether the reaction was catalyzed due to the ImmPd-IL complex or a
leached palladium metal that comes off the support at higher temperature during the
reaction a hot filtration test was performed (Lempers 1998 Zhao 2009)
Hot filtration experiment was performed for the alkoxycarbonylation of
iodobenzene with benzyl alcohol using ImmPd-IL catalyst Reaction was carried out
at 80 oC during reaction the ImmPd-IL complex catalyst was filtered off and the
filtrate without addition of catalyst was allowed to react further It was found that no
further reaction occurred after this hot filtration procedure hence this experimental
finding suggests there is no palladium leaching from the ImmPd-IL complex during
the progress of a reaction In addition to reconfirm this observation ICP-AES
analysis of the reaction mixture was carried out after 15 and 3 h which revealed a
below detectable level (below 001 ppm) of palladium in solution
It is also important to study the separation and recyclability of the catalyst
The ImmPd-IL catalyst was separated from the reaction mixture by a simple filtration
procedure and was found to be effective up to four consecutive recycles for
methoxycarbonylation reaction (Figure 52) No significant decrease in yield during
recycle study was observed
Figure 52 Recycle study of ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
232
523 PHENOXYCARBONYLATION REACTIONS
ImmPd-IL catalytic system was further explored for the phenoxycarbonylation of aryl
iodides with various phenols to yield corresponding phenyl esters and it was observed
that corresponding products were obtained in good to excellent yields (Scheme 526)
Scheme 526 Phenoxycarbonylation of aryl iodides with phenols using ImmPd-IL
For the optimization of reaction the influence of critical parameters such as
solvent base and CO pressure on the carbonylation of iodobenzene with phenol as a
nucleophile have been investigated (Table 53 entries 1-8)
Table 53 Effect of solvents and bases on ImmPd-IL catalyzed Phenoxycarbonylation
reactiona
Entry Solvent Base CO Press
(psi)
Yield
()b
1 DMF Et3N 145 56
2 14-Dioxane Et3N 145 62
3
Water Et3N 145 0
4 Toluene Et3N 145 90
5 Toluene DBU 145 80
6 Toluene K2CO3 145 66
7 Toluene Cs2CO3 145 72
8 Toluene Et3N 73 85
a Reaction conditions Iodobenzene (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
base (3 mmol) solvent (10 mL) 8 h at 100 degC b Yield based on GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
233
The role of various solvents such as NN-dimethyl formamide (DMF) (56)
14-dioxane (62) water (0) and toluene (90) was studied (Table 53 entries 1-
4) It was observed that the reaction was more favourable using toluene as a solvent
and provided 90 yield of phenyl benzoate (Table 54 entry 4) Various screened
organic and inorganic bases (K2CO3 Cs2CO3 DBU and Et3N) showed Et3N (90) to
be superior base at 100 degC (Table 53 entries 4-7) The initial reaction was carried out
at 145 psi CO pressure which provided 90 yield of phenyl benzoate a further
decrease in CO pressure up to 73 psi decreased the yield of the phenyl benzoate
(Table 53 entry 8) Hence the finalized reaction parameters were Et3N as a base in
toluene CO 73 psi at 100 degC for 8 h
These finalized reaction parameters were then applied for the
phenoxycarbonylation of different aryl halides and phenols having different electron-
donating or withdrawing groups (Table 54 entries 1-7) Iodobenzene reacts
efficiently with phenol within 8 h providing 89 isolated yield of phenyl benzoate
(Table 54 entry 1) Substituted phenols such as p-cresol p-methoxyphenol and p-
chlorophenol reacts with iodobenzene furnishing good to excellent yields of the
corresponding product (Table 54 entries 2-4) The substituted iodobenzene
derivative reacts with phenol and provided 86 yields of phenyl 4-methoxybenzoate
(Table 54 entry 5) 1-Iodo-4-nitrobenzene furnished moderate yield (59) of the
phenyl 4-nitrobenzoate (Table 54 entry 6) Reaction of 1-iodonaphthalene with
phenol provided 75 yield of phenyl 1-naphthoate (Table 54 entry 7)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
234
Table 54 ImmPd-IL catalyzed Phenoxycarbonylation of aryl iodides with various
phenolsa
Entry Aryl iodide Phenol Product Yield
()b
1
89
2
90
3
88
4
84
5
86
6
59
7
75
a Reaction conditions aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
235
524 AMINOCARBONYLATION REACTIONS
The scope of ImmPd-IL was further extended for aminocarbonylation of aryl iodides
with a range of aliphatic aromatic primary and secondary amines (Scheme 527)
Scheme 527 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with amines
The reaction of iodobenzene with aniline was selected as a model reaction for
optimization Various solvents such as DMF (80) water (70) anisole (60) and
toluene (92) were screened for the reaction (ionic liquid was insoluble in water as it
was immobilised on solid support) but toluene was found to be the best solvent
(Table 55 entries 1-4) Screening of a variety of bases showed Et3N (90) to be
superior at 100 degC (Table 55 entries 4-6) Further reaction was optimized with
respect to various reaction parameters including temperature time and CO pressure
and the best optimized reaction conditions were then applied for the
aminocarbonylation of a variety of iodoaryls and amines
Table 55 Effect of solvents and bases on ImmPd-IL catalyzed aminocarbonylation
reactiona
Entry Solvent Base Yield
()b
1 DMF Et3N 80
2 Water Et3N 70
3
Anisole Et3N 60
4 Toluene Et3N 92
5 Toluene Na2CO3 52
6 Toluene K2CO3 57
a Reaction conditions
Iodobenzene (1 mmol) aniline (2 mmol) ImmPd-IL (2 mol)
Et3N (3 mmol) Toluene (10 mL) 8 h at 100 degC 145 psi CO pressure b Yield based GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
236
The optimized reaction parameters were then applied for the
aminocarbonylation of substituted aryl halides and aromatic amines The model
reaction of iodobenzene with aniline provided 90 isolated yield of N-
phenylbenzamide under optimized reaction conditions (Table 56 entry 1) 4-
iodoanisole furnished 85 yield of 4-methoxy-N-phenylbenzamide (Table 56 entries
2) 4-methoxyaniline reacts with iodobenzene and provided 88 yield of N-(4-
methoxyphenyl)benzamide (Table 56 entry 3) 3-(Trifluoromethyl)aniline provided a
moderate yield of the expected product (Table 56 entry 4)
There after various primary aliphatic amines were screened for the
aminocarbonylation Cyclohexyl amine efficiently reacts with iodobenzene and 2-
iodonaphthalene and provided 92 and 80 yield of N-cyclohexylbenzamide and N-
cyclohexyl-1-naphthamide respectively (Table 56 entries 5-6) Reaction of
iodobenzene and 4-iodo acetophenone with tert-butyl amine furnished 92 and 89
yield of respective amide (Table 56 entry 7-8) Benzyl amine provided excellent
yields of N-benzylbenzamide (Table 56 entry 9) To our delight aromatic secondary
amine such as N-methyl aniline efficiently reacts with iodobenzene furnishing 91
yield of N-methyl-N-phenylbenzamide (Table 56 entry 10)
Table 56 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with various
aliphatic and aromatic primary amines and secondary aminesa
Entry Aryl iodide Amine Product Yield
()b
1
90
2
85
3
88
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
237
4
75
5
92
6
80
7
92
8
89
9
90
10
91
a Reaction conditions aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
238
53 CONCLUSION
The present study reports an efficient and common protocol for
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
by using a well-defined heterogeneous ImmPd-IL complex as a versatile
catalyst
The ease of preparation of the complex indefinite shelf life stability towards
air makes it an ideal complex for the above transformations
The reaction system was optimized with respect to various reaction parameters
and applied for carbonylation of a range of aryl iodides with different types of
alcohols phenols and amines furnishing good to excellent yields of the
corresponding products
The present protocol provided high yields of the desired products for all
carbonylation protocols
All the reactions were carried out under milder operating conditions
Catalytic system showed excellent activity and selectivity and effectively
recycled for four consecutive cycles
The leaching of the Pd metal was examined by hot filteration test and ICP-
AES analysis which revels no significant leaching of the palladium occurs
during the reaction
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
239
54 EXPERIMENTAL
541 Materials and Method N-methylimidazole (99+) and 3-trimethoxysilylpropyl
chloride (97+) were purchased from Aldrich PdCl2 was purchased from WAKO
Anhydrous redistilled 1-methylimidazole (99+) was purchased from Aldrich All
the dehydrated solvents were obtained from WAKO Aerosil 300 (300 m2g) was
obtained from Japan Aerosil Co and calcined at 573 K for 15 h in air and 30 min in
vacuum before use as a support The procedures for catalyst preparation were based
previous publication (Sasaki et al 2008) with some modifications Prepared catalyst
was characterized by using IR and elemental analysis and loading of the catalyst was
calculated by XRF measurements (SEA-2010 Seiko Electronic Industrial Co) The
XPS of ImmPd-IL was measured using a PHI5000 Versa Probe with monochromatic
focused (100 times 100 μm) Al Kα X-ray radiation (15 kV 30 mA) and dual beam
neutralization using a combination of argon ion gun and electron irradiation
The products are well-known in the literature and were compared with
authentic samples Progress of the reaction was monitored by gas chromatography
(GC) Gas chromatography analysis was carried out on Perkin-Elmer Clarus 400 GC
equipped flame ionization detector with a capillary column (Elite-1 30 m times 032 mm
times 025 μm) using the external standard method A GCMS-QP 2010 instrument (Rtx-
17 30 m times 25 mm id film thickness 025 μm df) (column flow 2 mL minminus1
80-240
degC at 10 degCmin rise) The 1H NMR spectra were recorded on Varian-300 MHz FT-
NMR spectrometer in CDCl3 using TMS as the internal standard The 13
C NMR
spectra were recorded with a JEOL FT-NMR model-AL300 (75 MHz) spectrometer
in CDCl3 Chemical shifts are reported in parts per million (δ) relative to
tetramethylsilane as the internal standard J (coupling constant) values were reported
in hertz (Hz) Proton splitting patterns are described as s (singlet) d (doublet) t
(triplet) and m (multiplet)
542 Preparation of immobilized palladium metal ion-containing ionic liquid
1-methyl-3-(3-trimethoxysilylpropyl) imidazolium chloride was synthesized by
mixing N-methylimidazole (0690 mol) and 3-trimethoxysilylpropyl chloride (0690
mol) in a dry 300 mL flask under a nitrogen atmosphere and refluxed for 48 h After
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
240
cooling to room temperature the resultant liquid was washed by dehydrated ethyl
acetate five times and dried at room temperature under reduced pressure for 48 h
The obtained compound was stored at 253 K under dry nitrogen Silica (Aerosil 300
surface area 300 m2g calcined at 573 K for 15 h in air) and 1-methyl-3-(3-
trimethoxysilylpropyl) imidazolium chloride (weight ratio 11) was dispersed in
dehydrated toluene and the mixture was refluxed for 48 h under nitrogen
After the reflux toluene was removed by filtration using glass filter and the
excess ionic liquid was removed by washing with dichloromethane several times The
resultant solid is denoted as Imm-IL In the next step Imm-IL was added to an
acetonitrile solution of PdCl2 and refluxed for 24 h Acetonitrile and excess of metal
chloride were removed by washing acetone using glass filter several times The metal
loading of ImmPd-IL was 34 wt as determined by XRF measurements (SEA-2010
Seiko Electronic Industrial Co)
543 General Experimental Procedure for Alkoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
and Et3N (3 mmol) were added The autoclave was closed purged three times with
carbon monoxide pressurized with 73 psi of CO and heated at 80 degC for 3 h After
completion of the reaction the reactor was cooled to room temperature and the
remaining CO gas was carefully vented and the reactor was opened The reactor
vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to remove any traces of
product and catalyst if present The catalyst was filtered and the reaction mixture was
evaporated under vacuum The residue obtained was purified by column
chromatography (silica gel 60-120 mesh petroleum etherethyl acetate 9505) to
afford the desired product
544 General Experimental Procedure for Recycling of ImmPd-IL
After completion of reaction the reaction mixture was cooled to room temperature
and the catalyst was collected by filtration The filtered catalyst was washed with
distilled water (3 times 5 mL) and methanol (3 times 5 mL) to remove all traces of product or
reactant present The filtered catalyst was then dried under reduced pressure The
dried catalyst was then used for the alkoxycarbonylation reaction of iodobenzene with
methanol for the recyclability experiment
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
241
545 XPS spectra of ImmPd-IL catalyst
The XPS spectra of ImmPd-IL shows that two peaks at 337 and 3424 eV for fresh
Imm-Pd are assigned as 3d52 and 3d32 for Pd2+
species respectively (Figure 53)
For the first recycle sample new peaks appear at 3342 and 3392 eV which are
assigned as 3d52 and 3d32 for Pd(0) species respectively indicating that the
reduction of the Pd species takes place during the catalytic reaction From the
spectrum of the fourth recycle sample it is obvious that the component of Pd2+
is
decreasing upon recycles although the component of Pd(0) remains constant
Figure 53 XPS of Pd 3d and Cl 2p for ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
242
546 General Experimental Procedure for Phenoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h After the completion of the reaction the reactor was cooled to room
temperature and the remaining CO gas was carefully vented and the reactor was
opened The reactor vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to
remove any traces of product and catalyst if present The catalyst was filtered and the
reaction mixture was evaporated under vacuum The residue obtained was purified by
column chromatography (silica gel 60-120 mesh petroleum etherethyl acetate
9505) to afford the desired product
547 General Experimental Procedure for Aminocarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol)
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h (the ensuing procedure is the same as that discussed above for the phenoxy
carbonylation reaction)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
243
55 SPECTRAL DATA
Methyl benzoate
GC-MS (EI 70 eV) mz () = 136 [M+] (35) 105 (100) 77 (55) 51 (20)
Ethyl benzoate
GC-MS (EI 70 eV) mz () = 150 [M+] (21) 122 (30) 105 (100) 77 (55)
Benzyl benzoate
1H NMR (300 MHz CDCl3) δ 804-808 (m 2H ArH) 731-752 (m 8H
ArH) 53 (s 2H CH2) 13
C NMR (75 MHz CDCl3) δ 16648 13619 13312
13025 12981 12870 12848 12834 12827 6677
Methyl 4-aminobenzoate
1H NMR (300 MHz CDCl3) δ 783 (d 2H J = 87 Hz ArH) 661 (d 2H J =
87 Hz ArH) 414 (br s 2H NH2) 383 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16724 15107 13151 11927 11368 5155
Methyl 4-hydroxybenzoate
1H NMR (300 MHz CDCl3) δ 794 (d 2H J = 87 Hz ArH) 722 (br s 1H
OH) 690 (d 2H J = 87 Hz ArH) 390 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16778 16055 13203 12201 11539 5223
Methyl 2-naphthoate
1H NMR (300 MHz CDCl3) δ 850 (s 1H ArH) 798-805 (m 2H ArH)
773 (t 2H J = 84 Hz ArH) 754-761 (m 2H ArH) 396 (s 3H OCH3) 13
C NMR
(75 MHz CDCl3) δ 16685 13634 13087 13082 13013 12938 12901 12778
12720 12632 12260 5235
Ethyl 4-acetylbenzoate
1H NMR (300 MHz CDCl3) δ 814-811 (m 2H ArH) 802-799 (m 2H
ArH) 441 (q 2H J = 69Hz CH2CH3) 265 (s 3H COCH3) 142 (t 3H J = 69Hz
CH2CH3) 13
C NMR (75 MHz CDCl3) δ 19766 16576 14012 13424 12977
12817 6147 2689 1427
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
244
Phenyl benzoate
1H NMR (300 MHz CDCl3) δ 825-822 (m 2H ArH) 768-863 (m 1H
ArH) 756-742 (m 4H ArH) 732-723 (m 3H ArH) 13
C NMR (75 MHz CDCl3)
δ 16590 15103 13365 13023 12964 12956 12864 12596 1217 GC-MS (EI
70 eV) mz () = 198 [M+] (9) 105 (100) 77 (40) 51 (9)
phenyl 4-nitrobenzoate
1H NMR (300 MHz CDCl3) δ = 837 (s 4H ArH) 723-748 (m 5H ArH)
13C NMR (75 MHz CDCl3) δ = 16347 15110 15072 13517 13144 12984
12657 12388 12157 GC-MS (EI 70 eV) mz () = 243 [M+] (15) 150 (100) 77
(10)
phenyl 4-methoxybenzoate
1H NMR (300 MHz CDCl3) δ = 814-816 (d 2H J = 87Hz ArH) 720-741
(m 5H ArH) 696-698 (d 2H J = 87 Hz ArH) 386 (s 3H OCH3) GC-MS (EI
70 eV) mz () = 228 [M+] (5) 135 (100) 107 (9) 77 (20)
phenyl-1-naphthoate
1H NMR (300 MHz CDCl3) δ = 904 (d 1H ArH) 845 (d1H ArH) 804
(d 1H ArH) 788 (d 1H ArH) 742-763 (m 5H ArH) 726-728 (m 3H ArH)
13C NMR (70 MHz CDCl3) δ = 16594 15118 13440 13408 13182 13134
12968 12883 12850 12829 12650 12605 12590 12465 12203
N-phenylbenzamide
1H NMR (300 MHz CDCl3) δ 798 (br s 1H NH) 787-883 (m 2H ArH)
763 (d 2H J = 76 Hz ArH) 732-753 (m 5H ArH) 716 (t 1H J = 73 ArH) 13
C
NMR (75 MHz CDCl3) δ 16590 13798 13502 13186 12911 12880 12709
12461 12032 ppm GC-MS mz () = 197 [M+] (42) 105 (100) 77 (54)
4-acetyl-N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 806 (d 2H J = 84Hz ArH) 777 (d 2H J
= 84Hz ArH) 601 (br s 1H NH) 393 (s 3H CH3) 148 (s 9H) 13
C NMR (75
MHz CDCl3) δ 16640 16605 13987 13234 12979 12682 5239 5195 2883
ppm GC-MS (EI 70 eV) mz () = 219 [M+] (20) 186 (22) 148 (100) 130 (30) 76
(20)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
219
Scheme 55 Palladium-catalyzed synthesis of tertiary esters
Xia and co-workers (2008) has developed a palladium on charcoal (PdC)
catalyzed protocol for the carbonylation of variety of substrates They demonstrated
phosphine free protocol for the alkoxycarbonylation and phenoxycarbonylation of aryl
iodides using alcohols or phenols as nucleophiles and carbonylative Sonogashira
coupling reaction of aryl iodides with terminal alkynes (Scheme 56) The catalytic
system was applied for the synthesis of variety of esters and alkynyl ketones
Scheme 56 PdC catalyzed carbonylation reactions
Robertson and co-workers (2012) have synthesized polymer-supported tri-
alkyl phosphine ligand this trialkyl phosphine ligands was loaded with palladium and
supported on Merrifield resin This supported complex was then explored for
alkoxycarbonylation reaction and SuzukindashMiyaura coupling reactions (Scheme 57)
Range of carbonyl compounds including aliphaticaromatic esters and substituted
biaryl ketones were synthesized with ease The catalyst was also recycled up to three
consecutive cycles
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
220
Scheme 57 Palladium-catalyzed alkoxycarbonylation of alcoholsphenols
Recently Siva Prasad and Satyanarayana (2013) have prepared PdFe3O4
catalyst and applied for carbonylation of aryl halide with variety of alcohols (Scheme
58) The catalyst was recovered with the simple application of an external magnetic
field due to paramagnetic behaviour of Fe3O4 catalyst was easily separated and was
recycled up to five consecutive cycles
Scheme 58 PdFe3O4 catalyzed alkoxycarbonylation of aryl halides
Palladium-catalyzed carbonylation of phenols (phenoxycarbonylation) has
been developed by Wu et al (2012) (Scheme 59) Activation of the phenols occurs
through in situ generation of aryl nonaflates Both electron-donating and electron-
withdrawing substituents on phenol ring were well tolerated for phenoxycarbonylation
under the developed catalytic system
Scheme 59 [Pd(cinnamyl)Cl2] catalyzed phenoxycarbonylation
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
221
For the first time CO free approach for alkoxycarbonylation of aryl halides
was developed by Yamane and co-workers (2011) (Scheme 510) The molybdenum
carbonyl complexes [Mo(CO)6] act as the catalyst and the source of carbon monoxide
(Scheme 510) The reaction was applied for the multi-acylation of polyols and
synthesis of a variety of carboxylic acid derivatives
Scheme 510 Mo(CO)6-mediated alkoxycarbonylation of aryl halides with alcohols
Another CO free approach using alkyl formates was demonstrated by Beller
and group (2010) (Scheme 511) The reaction was carried out by using palladium(II)
acetaten-butylbis(1-adamantly)phosphine (L1) and DBU as base in NMP as a
solvent The protocol was applied for alkoxycarbonylation of various aryl chlorides
Scheme 511 CO free alkoxycarbonylation of aryl halides using aryl formates
Recently for the first time Zhang et al (2012) reported transition-metal-free
alkoxycarbonylation of aryl halides using Potassium tert-butoxide (KOtBu) and high
pressure of carbon monoxide (Scheme 512) Moreover electron paramagnetic
resonance (EPR) experiments were conducted to study the reaction mechanism which
revealed participation of radicals in the reaction system The major drawback of the
protocol was the use of benzene as a solvent requirement of very high CO pressure
and of longer reaction time
Scheme 512 Transition metal free alkoxycarbonylation of aryl halides
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
222
512 AMINOCARBONYLATION REACTION
An aminocarbonylation reaction refers to the carbonylation reaction in which amine
as a nucleophile reacts with aryl halide in the presence of carbon monoxide which
gives amide as a major product Depending upon the amine employed one can get a
variety of aromatic aliphatic and heterocyclic amides
Gee and co-workers (2006) showed the application of microfluidic device for
the rapid synthesis of amides via aminocarbonylation reactions (Scheme 513) They
showed application of microstructure device for first time to perform a gas-liquid
carbonylation reaction The reaction was carriedout on a glass-fabricated Microchip
using Pd(dppp)Cl2 as a catalyst
Scheme 513 Pd phosphine catalyzed aminocarbonylation reaction
Whittall and group (2007) explored Bedford-type palladacycle complex (1) in
combination with Bis(diphenylphosphino)ferrocene ligand (dppf) for the
aminocarbonylation and alkoxycarbonylation reactions (Scheme 514) This palladium
complex acted as highly active catalysts for both the reactions showing compatibility
with a wide variety of substrates
Scheme 514 Palladacycle complex catalyzed carbonylation reactions
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
223
A method for the aminocarbonylation of aryl bromide using xantphos as a
ligand has been reported recently by Buchwald and group (2008) (Scheme 515) The
method was effective for the direct synthesis of Weinreb amides 1ry
and 2ry
benzamides and methyl esters from the corresponding aryl bromides at atmospheric
pressure of CO The catalytic system was applied for variety of substrates providing
good to excellent yield of desired carbonylated products In addition a putative
catalytic intermediate (Xantphos)Pd(Br)benzoyl was synthesized and an X-ray crystal
structure was also provided This crystal structure revealed that this species possess a
cis-coordinated palladium centre
Scheme 515 Pd(OAc)2 Xantphos catalyzed aminocarbonylation reaction
Kumar et al (2004) demonstrated the aminocarbonylation of unprotected
indoles with different N- and O-nucleophiles using Pddppf as a catalyst (Scheme
516) Various indole carboxylic acid derivatives were accessible in excellent yield
For example aminocarbonylation of 4- 5- 6- or 7-bromoindole with arylethyl
piperazines provided a direct one-step synthesis for CNS active amphetamine
derivatives
Scheme 516 Pd dppf catalyzed aminocarbonylation of bromoindoles
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
224
Pd-catalyzed aminocarbonylation of heteroaryl halides using monodentate
ligand di-tert-butylphosphinoferrocene tetrafluoroborate has been developed by
Senanayake and co-workers (2009) (Scheme 517) The developed protocol was
successfully applied for the preparation of a series of heteroaromatic amide
derivatives in good yields
Scheme 517 Pd P(Fc)(t-Bu)2HBF4 catalyzed aminocarbonylation
Kollar and group reported (2007) Pd(OAc)2PPh3 catalyzed protocol for the
aminocarbonylation of heteroaryl iodides (Scheme 518) Various primary and
secondary amines including amino acid methyl esters were used as nucleophiles in
palladium-catalyzed aminocarbonylation of 2-iodopyridine 3-iodopyridine and
iodopyrazine The reaction works well with variety of nucleophiles having electron-
rich and electron-poor substituents
Scheme 518 Pd(OAc)2PPh3 catalyzed aminocarbonylation of heteroaryl iodides
Well-dispersed palladium(0) nanoparticles stabilized with phosphonium based
ionic liquid were synthesized and explored for the aminocarbonylation reaction of aryl
iodide in ionic liquid media by Zhu et al (2011) (Scheme 519) Different derivatives
of amides were synthesized from corresponding aryl halide and aryl amines
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
225
Scheme 519 Pd(0) nanoparticles catalyzed aminocarbonylation of heteroaryl iodides
An efficient methodology for the synthesis of amides via palladium-catalyzed
aminocarbonylation of aryl iodides was reported by Castill et al (2012) using the
bulky cis-12-bis[(di-tert-butylphosphino)methyl]cyclohexane ligand under
atmospheric pressure of carbon monoxide (Scheme 520) A broad range of iodoaryl
derivatives with different amine were screened
Scheme 520 PdP(Fc)(t-Bu)2 catalyzed aminocarbonylation
Recently Dang et al (2012) reported an aminocarbonylation of aryl iodides
using palladium nanoparticles supported on MOF-5 (metal-organic frameworks)
(Scheme 521) Various palladium supported catalysts using different solid supports
like Silica Al2O3 and MOF has been synthesized but palladium catalyst supported on
MOF-5 provided better results The developed catalytic system worked under
atmospheric pressure of carbon monoxide and was applied for the synthesis of various
substituted amides furthermore the catalyst was also recycled
Scheme 521 Pd nanoparticles supported on MOF-5 catalyzed aminocarbonylation
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
226
Begouin et al (2009) have demonstrated that [Mo(CO)6] can be successfully
used as a CO source in aminocarbonylation reactions (Scheme 522) Range of aryl
and heteroaryl substrates either halides or amines were tested for the
aminocarbonylation reactions
Scheme 522 CO free aminocarbonylation using Mo(CO)6
Literature reports reveals that alkoxyphenoxycarbonylation and
aminocarbonylation were well explored by using a variety of homogeneous Pd
complexes with different air and moisture sensitive NP containing ligands which had
problems in the recovery and recycling of the expensive palladium catalyst Also there
is no general protocol developed which could efficiently catalyze the carbonylation of
aryl iodide with different nucleophiles such as phenols alcohols and amines Thus
there is a need to develop a chemically well defined air stable single-component Pd-
complex which can efficiently catalyze different carbonylation reactions including
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
Considering this immobilization strategies for metal complex wherein the
metal is coordinated to a ligand grafted on to an inorganic or organic support has been
developed (Lu and Toy 2009 Byun and Lee 2004) Ionic liquids containing metal
ions are considered as catalytic precursors and they can be immobilized on solid
support thus facilitates the reuse of catalyst finding a promising use in organic
transformations (Doorslaer et al 2010 Sasaki et al 2005 Sasaki et al 2008 Zhong
et al 2006) In this regards immobilized palladium metal ion containing ionic liquid
[ImmPd-IL] is explored for alkoxycarbonylation phenoxycarbonylation and
aminocarbonylation reactions
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
227
52 RESULTS AND DISCUSSION
Considering the objective of the development of efficient phosphine free
heterogeneous and recyclable protocol immobilized palladium metal ion containing
ionic liquid (ImmPd-IL) was used as a common catalyst for alkoxycarbonylation
phenoxycarbonylation and aminocarbonylation reactions (Scheme 523) The
methodology offers synthesis of various carbonyl compounds including aliphatic
esters aromatic esters and amides from corresponding alcohol phenol and amines
The protocol is advantageous due to the ease in handling of the catalyst and simple
workup procedure and effective catalyst recyclability
Scheme 523 ImmPd-IL catalyzed different carbonylation reactions
521 Preparation of immobilized palladium metal ion containing ionic liquid
(ImmPd-IL) catalyst
Preparation of immobilized palladium metal ion-containing ionic liquid catalyst
(ImmPd-IL) is a two step process (Scheme 524) The first step involves the anchoring
of ionic liquid on to a silica support which gives immobilized ionic liquid (Imm-IL)
In a second step the synthesized Imm-IL is loaded with palladium metal ion (PdCl2)
which results immobilized palladium ion-containing ionic liquid (ImmPd-IL)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
228
Scheme 524 Preparation of immobilized ImmPd-IL
522 ALKOXYCARBONYLATION REACTIONS
Initially alkoxycarbonylation reaction of aryl iodide with aliphatic alcohols was
studied (Scheme 525)
Scheme 525 ImmPd-IL catalyzed alkoxycarbonylation of aryl iodides with alcohols
The effect of various reaction parameters like base temperature time and CO
pressure using ImmPd-IL as a catalyst was studied (Table 51) The reaction of
iodobenzene with methyl alcohol in presence of CO was chosen as model reaction for
the optimization To study the role of base the reaction was carried out using various
inorganic bases like K2CO3 (80) Cs2CO3 (79) and organic bases like DBU (85)
Et3N (96) (Table 51 entries 1-4) As Et3N provided maximum yield of the methyl
benzoate it was used for further study No profound increase in the yield of methyl
benzoate was observed when the reaction temperature was increased from 80 to 100
degC therefore 80 degC was considered as an optimum reaction temperature for further
studies (Table 51 entries 4-5) When CO pressure was increased from 73 psi to 145
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
229
psi equivalent yield of the desired product was observed (Table 51 entry 6) Hence
the finalized reaction conditions were base Et3N temperature 80 degC solvent
alcohol (also as a nucleophile) time 3 h and 73 psi of CO pressure
Table 51 Effect of bases temperature and time on ImmPd-IL catalyzed
alkoxycarbonylation reactiona
Entry Base Temp
(degC)
CO Press
(psi)
Yield
()b
1 K2CO3 80 73 80
2 Cs2CO3 80 73 79
3 DBU 80 73 85
4 Et3N 80 73 96
5 Et3N 100 73 97
6 Et3N 100 145 98
a Reaction conditions
Iodobenzene (2 mmol) methyl alcohol (5 mL) ImmPd-IL (2
mol ) Et3N (3 mmol) 73 psi CO press Temp (80 degC) Time (3 h) b Yield based on GC analysis
These optimized reaction parameters were then successfully applied to variety
of aryl iodides with different alcohols (Table 52) Model reaction of iodobenzene
with methyl alcohol provided 94 isolated yield of methyl benzoate (Table 52 entry
1) Ethyl alcohol and benzyl alcohol also reacts efficiently with iodobenzene
providing 95 and 89 yield of ethyl benzoate and benzyl benzoate respectively
(Table 52 entries 1-3) The substituted iodobenzene derivatives 4-iodoaniline and 4-
iodophenol furnished 80 and 75 yield of the methyl 4-aminobenzoate and methyl
4-hydroxybenzoate respectively (Table 52 entries 4-5) 4-Acetyliodobenzene reacts
with ethanol and provided 81 yield of ethyl-4-acetylbenzoate (Table 52 entry 6)
Iodonaphthalene furnished 79 yield of methyl 2-naphthoate (Table 52 entry 7)
whereas 1-iodo-4-nitrobenzene efficiently reacts with methyl alcohol furnishing a
moderate yield (70) of methyl 4-nitrobenzoate (Table 52 entry 8)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
230
Table 52 ImmPd-IL catalyzed alkoxycarbonylation of aryl iodides with various
alcoholsa
Entry Aryl iodide Alcohol Product Yield
()b
1
MeOH
94
2
EtOH
95
3
89
4
MeOH
80
5
MeOH
75
6
EtOH
81
7
MeOH
79
8
MeOH
70
a Reaction conditions aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
Et3N (3 mmol) 73 psi CO press Temp (80 degC) Time (3 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
231
It is believed that the supported palladium metal leaches out from the solid
support and goes into the solution at higher temperature and the reaction was
catalyzed mainly by dissolved palladium species (Tambade et al 2008) Hence to
determine whether the reaction was catalyzed due to the ImmPd-IL complex or a
leached palladium metal that comes off the support at higher temperature during the
reaction a hot filtration test was performed (Lempers 1998 Zhao 2009)
Hot filtration experiment was performed for the alkoxycarbonylation of
iodobenzene with benzyl alcohol using ImmPd-IL catalyst Reaction was carried out
at 80 oC during reaction the ImmPd-IL complex catalyst was filtered off and the
filtrate without addition of catalyst was allowed to react further It was found that no
further reaction occurred after this hot filtration procedure hence this experimental
finding suggests there is no palladium leaching from the ImmPd-IL complex during
the progress of a reaction In addition to reconfirm this observation ICP-AES
analysis of the reaction mixture was carried out after 15 and 3 h which revealed a
below detectable level (below 001 ppm) of palladium in solution
It is also important to study the separation and recyclability of the catalyst
The ImmPd-IL catalyst was separated from the reaction mixture by a simple filtration
procedure and was found to be effective up to four consecutive recycles for
methoxycarbonylation reaction (Figure 52) No significant decrease in yield during
recycle study was observed
Figure 52 Recycle study of ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
232
523 PHENOXYCARBONYLATION REACTIONS
ImmPd-IL catalytic system was further explored for the phenoxycarbonylation of aryl
iodides with various phenols to yield corresponding phenyl esters and it was observed
that corresponding products were obtained in good to excellent yields (Scheme 526)
Scheme 526 Phenoxycarbonylation of aryl iodides with phenols using ImmPd-IL
For the optimization of reaction the influence of critical parameters such as
solvent base and CO pressure on the carbonylation of iodobenzene with phenol as a
nucleophile have been investigated (Table 53 entries 1-8)
Table 53 Effect of solvents and bases on ImmPd-IL catalyzed Phenoxycarbonylation
reactiona
Entry Solvent Base CO Press
(psi)
Yield
()b
1 DMF Et3N 145 56
2 14-Dioxane Et3N 145 62
3
Water Et3N 145 0
4 Toluene Et3N 145 90
5 Toluene DBU 145 80
6 Toluene K2CO3 145 66
7 Toluene Cs2CO3 145 72
8 Toluene Et3N 73 85
a Reaction conditions Iodobenzene (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
base (3 mmol) solvent (10 mL) 8 h at 100 degC b Yield based on GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
233
The role of various solvents such as NN-dimethyl formamide (DMF) (56)
14-dioxane (62) water (0) and toluene (90) was studied (Table 53 entries 1-
4) It was observed that the reaction was more favourable using toluene as a solvent
and provided 90 yield of phenyl benzoate (Table 54 entry 4) Various screened
organic and inorganic bases (K2CO3 Cs2CO3 DBU and Et3N) showed Et3N (90) to
be superior base at 100 degC (Table 53 entries 4-7) The initial reaction was carried out
at 145 psi CO pressure which provided 90 yield of phenyl benzoate a further
decrease in CO pressure up to 73 psi decreased the yield of the phenyl benzoate
(Table 53 entry 8) Hence the finalized reaction parameters were Et3N as a base in
toluene CO 73 psi at 100 degC for 8 h
These finalized reaction parameters were then applied for the
phenoxycarbonylation of different aryl halides and phenols having different electron-
donating or withdrawing groups (Table 54 entries 1-7) Iodobenzene reacts
efficiently with phenol within 8 h providing 89 isolated yield of phenyl benzoate
(Table 54 entry 1) Substituted phenols such as p-cresol p-methoxyphenol and p-
chlorophenol reacts with iodobenzene furnishing good to excellent yields of the
corresponding product (Table 54 entries 2-4) The substituted iodobenzene
derivative reacts with phenol and provided 86 yields of phenyl 4-methoxybenzoate
(Table 54 entry 5) 1-Iodo-4-nitrobenzene furnished moderate yield (59) of the
phenyl 4-nitrobenzoate (Table 54 entry 6) Reaction of 1-iodonaphthalene with
phenol provided 75 yield of phenyl 1-naphthoate (Table 54 entry 7)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
234
Table 54 ImmPd-IL catalyzed Phenoxycarbonylation of aryl iodides with various
phenolsa
Entry Aryl iodide Phenol Product Yield
()b
1
89
2
90
3
88
4
84
5
86
6
59
7
75
a Reaction conditions aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
235
524 AMINOCARBONYLATION REACTIONS
The scope of ImmPd-IL was further extended for aminocarbonylation of aryl iodides
with a range of aliphatic aromatic primary and secondary amines (Scheme 527)
Scheme 527 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with amines
The reaction of iodobenzene with aniline was selected as a model reaction for
optimization Various solvents such as DMF (80) water (70) anisole (60) and
toluene (92) were screened for the reaction (ionic liquid was insoluble in water as it
was immobilised on solid support) but toluene was found to be the best solvent
(Table 55 entries 1-4) Screening of a variety of bases showed Et3N (90) to be
superior at 100 degC (Table 55 entries 4-6) Further reaction was optimized with
respect to various reaction parameters including temperature time and CO pressure
and the best optimized reaction conditions were then applied for the
aminocarbonylation of a variety of iodoaryls and amines
Table 55 Effect of solvents and bases on ImmPd-IL catalyzed aminocarbonylation
reactiona
Entry Solvent Base Yield
()b
1 DMF Et3N 80
2 Water Et3N 70
3
Anisole Et3N 60
4 Toluene Et3N 92
5 Toluene Na2CO3 52
6 Toluene K2CO3 57
a Reaction conditions
Iodobenzene (1 mmol) aniline (2 mmol) ImmPd-IL (2 mol)
Et3N (3 mmol) Toluene (10 mL) 8 h at 100 degC 145 psi CO pressure b Yield based GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
236
The optimized reaction parameters were then applied for the
aminocarbonylation of substituted aryl halides and aromatic amines The model
reaction of iodobenzene with aniline provided 90 isolated yield of N-
phenylbenzamide under optimized reaction conditions (Table 56 entry 1) 4-
iodoanisole furnished 85 yield of 4-methoxy-N-phenylbenzamide (Table 56 entries
2) 4-methoxyaniline reacts with iodobenzene and provided 88 yield of N-(4-
methoxyphenyl)benzamide (Table 56 entry 3) 3-(Trifluoromethyl)aniline provided a
moderate yield of the expected product (Table 56 entry 4)
There after various primary aliphatic amines were screened for the
aminocarbonylation Cyclohexyl amine efficiently reacts with iodobenzene and 2-
iodonaphthalene and provided 92 and 80 yield of N-cyclohexylbenzamide and N-
cyclohexyl-1-naphthamide respectively (Table 56 entries 5-6) Reaction of
iodobenzene and 4-iodo acetophenone with tert-butyl amine furnished 92 and 89
yield of respective amide (Table 56 entry 7-8) Benzyl amine provided excellent
yields of N-benzylbenzamide (Table 56 entry 9) To our delight aromatic secondary
amine such as N-methyl aniline efficiently reacts with iodobenzene furnishing 91
yield of N-methyl-N-phenylbenzamide (Table 56 entry 10)
Table 56 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with various
aliphatic and aromatic primary amines and secondary aminesa
Entry Aryl iodide Amine Product Yield
()b
1
90
2
85
3
88
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
237
4
75
5
92
6
80
7
92
8
89
9
90
10
91
a Reaction conditions aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
238
53 CONCLUSION
The present study reports an efficient and common protocol for
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
by using a well-defined heterogeneous ImmPd-IL complex as a versatile
catalyst
The ease of preparation of the complex indefinite shelf life stability towards
air makes it an ideal complex for the above transformations
The reaction system was optimized with respect to various reaction parameters
and applied for carbonylation of a range of aryl iodides with different types of
alcohols phenols and amines furnishing good to excellent yields of the
corresponding products
The present protocol provided high yields of the desired products for all
carbonylation protocols
All the reactions were carried out under milder operating conditions
Catalytic system showed excellent activity and selectivity and effectively
recycled for four consecutive cycles
The leaching of the Pd metal was examined by hot filteration test and ICP-
AES analysis which revels no significant leaching of the palladium occurs
during the reaction
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
239
54 EXPERIMENTAL
541 Materials and Method N-methylimidazole (99+) and 3-trimethoxysilylpropyl
chloride (97+) were purchased from Aldrich PdCl2 was purchased from WAKO
Anhydrous redistilled 1-methylimidazole (99+) was purchased from Aldrich All
the dehydrated solvents were obtained from WAKO Aerosil 300 (300 m2g) was
obtained from Japan Aerosil Co and calcined at 573 K for 15 h in air and 30 min in
vacuum before use as a support The procedures for catalyst preparation were based
previous publication (Sasaki et al 2008) with some modifications Prepared catalyst
was characterized by using IR and elemental analysis and loading of the catalyst was
calculated by XRF measurements (SEA-2010 Seiko Electronic Industrial Co) The
XPS of ImmPd-IL was measured using a PHI5000 Versa Probe with monochromatic
focused (100 times 100 μm) Al Kα X-ray radiation (15 kV 30 mA) and dual beam
neutralization using a combination of argon ion gun and electron irradiation
The products are well-known in the literature and were compared with
authentic samples Progress of the reaction was monitored by gas chromatography
(GC) Gas chromatography analysis was carried out on Perkin-Elmer Clarus 400 GC
equipped flame ionization detector with a capillary column (Elite-1 30 m times 032 mm
times 025 μm) using the external standard method A GCMS-QP 2010 instrument (Rtx-
17 30 m times 25 mm id film thickness 025 μm df) (column flow 2 mL minminus1
80-240
degC at 10 degCmin rise) The 1H NMR spectra were recorded on Varian-300 MHz FT-
NMR spectrometer in CDCl3 using TMS as the internal standard The 13
C NMR
spectra were recorded with a JEOL FT-NMR model-AL300 (75 MHz) spectrometer
in CDCl3 Chemical shifts are reported in parts per million (δ) relative to
tetramethylsilane as the internal standard J (coupling constant) values were reported
in hertz (Hz) Proton splitting patterns are described as s (singlet) d (doublet) t
(triplet) and m (multiplet)
542 Preparation of immobilized palladium metal ion-containing ionic liquid
1-methyl-3-(3-trimethoxysilylpropyl) imidazolium chloride was synthesized by
mixing N-methylimidazole (0690 mol) and 3-trimethoxysilylpropyl chloride (0690
mol) in a dry 300 mL flask under a nitrogen atmosphere and refluxed for 48 h After
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
240
cooling to room temperature the resultant liquid was washed by dehydrated ethyl
acetate five times and dried at room temperature under reduced pressure for 48 h
The obtained compound was stored at 253 K under dry nitrogen Silica (Aerosil 300
surface area 300 m2g calcined at 573 K for 15 h in air) and 1-methyl-3-(3-
trimethoxysilylpropyl) imidazolium chloride (weight ratio 11) was dispersed in
dehydrated toluene and the mixture was refluxed for 48 h under nitrogen
After the reflux toluene was removed by filtration using glass filter and the
excess ionic liquid was removed by washing with dichloromethane several times The
resultant solid is denoted as Imm-IL In the next step Imm-IL was added to an
acetonitrile solution of PdCl2 and refluxed for 24 h Acetonitrile and excess of metal
chloride were removed by washing acetone using glass filter several times The metal
loading of ImmPd-IL was 34 wt as determined by XRF measurements (SEA-2010
Seiko Electronic Industrial Co)
543 General Experimental Procedure for Alkoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
and Et3N (3 mmol) were added The autoclave was closed purged three times with
carbon monoxide pressurized with 73 psi of CO and heated at 80 degC for 3 h After
completion of the reaction the reactor was cooled to room temperature and the
remaining CO gas was carefully vented and the reactor was opened The reactor
vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to remove any traces of
product and catalyst if present The catalyst was filtered and the reaction mixture was
evaporated under vacuum The residue obtained was purified by column
chromatography (silica gel 60-120 mesh petroleum etherethyl acetate 9505) to
afford the desired product
544 General Experimental Procedure for Recycling of ImmPd-IL
After completion of reaction the reaction mixture was cooled to room temperature
and the catalyst was collected by filtration The filtered catalyst was washed with
distilled water (3 times 5 mL) and methanol (3 times 5 mL) to remove all traces of product or
reactant present The filtered catalyst was then dried under reduced pressure The
dried catalyst was then used for the alkoxycarbonylation reaction of iodobenzene with
methanol for the recyclability experiment
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
241
545 XPS spectra of ImmPd-IL catalyst
The XPS spectra of ImmPd-IL shows that two peaks at 337 and 3424 eV for fresh
Imm-Pd are assigned as 3d52 and 3d32 for Pd2+
species respectively (Figure 53)
For the first recycle sample new peaks appear at 3342 and 3392 eV which are
assigned as 3d52 and 3d32 for Pd(0) species respectively indicating that the
reduction of the Pd species takes place during the catalytic reaction From the
spectrum of the fourth recycle sample it is obvious that the component of Pd2+
is
decreasing upon recycles although the component of Pd(0) remains constant
Figure 53 XPS of Pd 3d and Cl 2p for ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
242
546 General Experimental Procedure for Phenoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h After the completion of the reaction the reactor was cooled to room
temperature and the remaining CO gas was carefully vented and the reactor was
opened The reactor vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to
remove any traces of product and catalyst if present The catalyst was filtered and the
reaction mixture was evaporated under vacuum The residue obtained was purified by
column chromatography (silica gel 60-120 mesh petroleum etherethyl acetate
9505) to afford the desired product
547 General Experimental Procedure for Aminocarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol)
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h (the ensuing procedure is the same as that discussed above for the phenoxy
carbonylation reaction)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
243
55 SPECTRAL DATA
Methyl benzoate
GC-MS (EI 70 eV) mz () = 136 [M+] (35) 105 (100) 77 (55) 51 (20)
Ethyl benzoate
GC-MS (EI 70 eV) mz () = 150 [M+] (21) 122 (30) 105 (100) 77 (55)
Benzyl benzoate
1H NMR (300 MHz CDCl3) δ 804-808 (m 2H ArH) 731-752 (m 8H
ArH) 53 (s 2H CH2) 13
C NMR (75 MHz CDCl3) δ 16648 13619 13312
13025 12981 12870 12848 12834 12827 6677
Methyl 4-aminobenzoate
1H NMR (300 MHz CDCl3) δ 783 (d 2H J = 87 Hz ArH) 661 (d 2H J =
87 Hz ArH) 414 (br s 2H NH2) 383 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16724 15107 13151 11927 11368 5155
Methyl 4-hydroxybenzoate
1H NMR (300 MHz CDCl3) δ 794 (d 2H J = 87 Hz ArH) 722 (br s 1H
OH) 690 (d 2H J = 87 Hz ArH) 390 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16778 16055 13203 12201 11539 5223
Methyl 2-naphthoate
1H NMR (300 MHz CDCl3) δ 850 (s 1H ArH) 798-805 (m 2H ArH)
773 (t 2H J = 84 Hz ArH) 754-761 (m 2H ArH) 396 (s 3H OCH3) 13
C NMR
(75 MHz CDCl3) δ 16685 13634 13087 13082 13013 12938 12901 12778
12720 12632 12260 5235
Ethyl 4-acetylbenzoate
1H NMR (300 MHz CDCl3) δ 814-811 (m 2H ArH) 802-799 (m 2H
ArH) 441 (q 2H J = 69Hz CH2CH3) 265 (s 3H COCH3) 142 (t 3H J = 69Hz
CH2CH3) 13
C NMR (75 MHz CDCl3) δ 19766 16576 14012 13424 12977
12817 6147 2689 1427
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
244
Phenyl benzoate
1H NMR (300 MHz CDCl3) δ 825-822 (m 2H ArH) 768-863 (m 1H
ArH) 756-742 (m 4H ArH) 732-723 (m 3H ArH) 13
C NMR (75 MHz CDCl3)
δ 16590 15103 13365 13023 12964 12956 12864 12596 1217 GC-MS (EI
70 eV) mz () = 198 [M+] (9) 105 (100) 77 (40) 51 (9)
phenyl 4-nitrobenzoate
1H NMR (300 MHz CDCl3) δ = 837 (s 4H ArH) 723-748 (m 5H ArH)
13C NMR (75 MHz CDCl3) δ = 16347 15110 15072 13517 13144 12984
12657 12388 12157 GC-MS (EI 70 eV) mz () = 243 [M+] (15) 150 (100) 77
(10)
phenyl 4-methoxybenzoate
1H NMR (300 MHz CDCl3) δ = 814-816 (d 2H J = 87Hz ArH) 720-741
(m 5H ArH) 696-698 (d 2H J = 87 Hz ArH) 386 (s 3H OCH3) GC-MS (EI
70 eV) mz () = 228 [M+] (5) 135 (100) 107 (9) 77 (20)
phenyl-1-naphthoate
1H NMR (300 MHz CDCl3) δ = 904 (d 1H ArH) 845 (d1H ArH) 804
(d 1H ArH) 788 (d 1H ArH) 742-763 (m 5H ArH) 726-728 (m 3H ArH)
13C NMR (70 MHz CDCl3) δ = 16594 15118 13440 13408 13182 13134
12968 12883 12850 12829 12650 12605 12590 12465 12203
N-phenylbenzamide
1H NMR (300 MHz CDCl3) δ 798 (br s 1H NH) 787-883 (m 2H ArH)
763 (d 2H J = 76 Hz ArH) 732-753 (m 5H ArH) 716 (t 1H J = 73 ArH) 13
C
NMR (75 MHz CDCl3) δ 16590 13798 13502 13186 12911 12880 12709
12461 12032 ppm GC-MS mz () = 197 [M+] (42) 105 (100) 77 (54)
4-acetyl-N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 806 (d 2H J = 84Hz ArH) 777 (d 2H J
= 84Hz ArH) 601 (br s 1H NH) 393 (s 3H CH3) 148 (s 9H) 13
C NMR (75
MHz CDCl3) δ 16640 16605 13987 13234 12979 12682 5239 5195 2883
ppm GC-MS (EI 70 eV) mz () = 219 [M+] (20) 186 (22) 148 (100) 130 (30) 76
(20)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
220
Scheme 57 Palladium-catalyzed alkoxycarbonylation of alcoholsphenols
Recently Siva Prasad and Satyanarayana (2013) have prepared PdFe3O4
catalyst and applied for carbonylation of aryl halide with variety of alcohols (Scheme
58) The catalyst was recovered with the simple application of an external magnetic
field due to paramagnetic behaviour of Fe3O4 catalyst was easily separated and was
recycled up to five consecutive cycles
Scheme 58 PdFe3O4 catalyzed alkoxycarbonylation of aryl halides
Palladium-catalyzed carbonylation of phenols (phenoxycarbonylation) has
been developed by Wu et al (2012) (Scheme 59) Activation of the phenols occurs
through in situ generation of aryl nonaflates Both electron-donating and electron-
withdrawing substituents on phenol ring were well tolerated for phenoxycarbonylation
under the developed catalytic system
Scheme 59 [Pd(cinnamyl)Cl2] catalyzed phenoxycarbonylation
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
221
For the first time CO free approach for alkoxycarbonylation of aryl halides
was developed by Yamane and co-workers (2011) (Scheme 510) The molybdenum
carbonyl complexes [Mo(CO)6] act as the catalyst and the source of carbon monoxide
(Scheme 510) The reaction was applied for the multi-acylation of polyols and
synthesis of a variety of carboxylic acid derivatives
Scheme 510 Mo(CO)6-mediated alkoxycarbonylation of aryl halides with alcohols
Another CO free approach using alkyl formates was demonstrated by Beller
and group (2010) (Scheme 511) The reaction was carried out by using palladium(II)
acetaten-butylbis(1-adamantly)phosphine (L1) and DBU as base in NMP as a
solvent The protocol was applied for alkoxycarbonylation of various aryl chlorides
Scheme 511 CO free alkoxycarbonylation of aryl halides using aryl formates
Recently for the first time Zhang et al (2012) reported transition-metal-free
alkoxycarbonylation of aryl halides using Potassium tert-butoxide (KOtBu) and high
pressure of carbon monoxide (Scheme 512) Moreover electron paramagnetic
resonance (EPR) experiments were conducted to study the reaction mechanism which
revealed participation of radicals in the reaction system The major drawback of the
protocol was the use of benzene as a solvent requirement of very high CO pressure
and of longer reaction time
Scheme 512 Transition metal free alkoxycarbonylation of aryl halides
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
222
512 AMINOCARBONYLATION REACTION
An aminocarbonylation reaction refers to the carbonylation reaction in which amine
as a nucleophile reacts with aryl halide in the presence of carbon monoxide which
gives amide as a major product Depending upon the amine employed one can get a
variety of aromatic aliphatic and heterocyclic amides
Gee and co-workers (2006) showed the application of microfluidic device for
the rapid synthesis of amides via aminocarbonylation reactions (Scheme 513) They
showed application of microstructure device for first time to perform a gas-liquid
carbonylation reaction The reaction was carriedout on a glass-fabricated Microchip
using Pd(dppp)Cl2 as a catalyst
Scheme 513 Pd phosphine catalyzed aminocarbonylation reaction
Whittall and group (2007) explored Bedford-type palladacycle complex (1) in
combination with Bis(diphenylphosphino)ferrocene ligand (dppf) for the
aminocarbonylation and alkoxycarbonylation reactions (Scheme 514) This palladium
complex acted as highly active catalysts for both the reactions showing compatibility
with a wide variety of substrates
Scheme 514 Palladacycle complex catalyzed carbonylation reactions
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
223
A method for the aminocarbonylation of aryl bromide using xantphos as a
ligand has been reported recently by Buchwald and group (2008) (Scheme 515) The
method was effective for the direct synthesis of Weinreb amides 1ry
and 2ry
benzamides and methyl esters from the corresponding aryl bromides at atmospheric
pressure of CO The catalytic system was applied for variety of substrates providing
good to excellent yield of desired carbonylated products In addition a putative
catalytic intermediate (Xantphos)Pd(Br)benzoyl was synthesized and an X-ray crystal
structure was also provided This crystal structure revealed that this species possess a
cis-coordinated palladium centre
Scheme 515 Pd(OAc)2 Xantphos catalyzed aminocarbonylation reaction
Kumar et al (2004) demonstrated the aminocarbonylation of unprotected
indoles with different N- and O-nucleophiles using Pddppf as a catalyst (Scheme
516) Various indole carboxylic acid derivatives were accessible in excellent yield
For example aminocarbonylation of 4- 5- 6- or 7-bromoindole with arylethyl
piperazines provided a direct one-step synthesis for CNS active amphetamine
derivatives
Scheme 516 Pd dppf catalyzed aminocarbonylation of bromoindoles
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
224
Pd-catalyzed aminocarbonylation of heteroaryl halides using monodentate
ligand di-tert-butylphosphinoferrocene tetrafluoroborate has been developed by
Senanayake and co-workers (2009) (Scheme 517) The developed protocol was
successfully applied for the preparation of a series of heteroaromatic amide
derivatives in good yields
Scheme 517 Pd P(Fc)(t-Bu)2HBF4 catalyzed aminocarbonylation
Kollar and group reported (2007) Pd(OAc)2PPh3 catalyzed protocol for the
aminocarbonylation of heteroaryl iodides (Scheme 518) Various primary and
secondary amines including amino acid methyl esters were used as nucleophiles in
palladium-catalyzed aminocarbonylation of 2-iodopyridine 3-iodopyridine and
iodopyrazine The reaction works well with variety of nucleophiles having electron-
rich and electron-poor substituents
Scheme 518 Pd(OAc)2PPh3 catalyzed aminocarbonylation of heteroaryl iodides
Well-dispersed palladium(0) nanoparticles stabilized with phosphonium based
ionic liquid were synthesized and explored for the aminocarbonylation reaction of aryl
iodide in ionic liquid media by Zhu et al (2011) (Scheme 519) Different derivatives
of amides were synthesized from corresponding aryl halide and aryl amines
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
225
Scheme 519 Pd(0) nanoparticles catalyzed aminocarbonylation of heteroaryl iodides
An efficient methodology for the synthesis of amides via palladium-catalyzed
aminocarbonylation of aryl iodides was reported by Castill et al (2012) using the
bulky cis-12-bis[(di-tert-butylphosphino)methyl]cyclohexane ligand under
atmospheric pressure of carbon monoxide (Scheme 520) A broad range of iodoaryl
derivatives with different amine were screened
Scheme 520 PdP(Fc)(t-Bu)2 catalyzed aminocarbonylation
Recently Dang et al (2012) reported an aminocarbonylation of aryl iodides
using palladium nanoparticles supported on MOF-5 (metal-organic frameworks)
(Scheme 521) Various palladium supported catalysts using different solid supports
like Silica Al2O3 and MOF has been synthesized but palladium catalyst supported on
MOF-5 provided better results The developed catalytic system worked under
atmospheric pressure of carbon monoxide and was applied for the synthesis of various
substituted amides furthermore the catalyst was also recycled
Scheme 521 Pd nanoparticles supported on MOF-5 catalyzed aminocarbonylation
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
226
Begouin et al (2009) have demonstrated that [Mo(CO)6] can be successfully
used as a CO source in aminocarbonylation reactions (Scheme 522) Range of aryl
and heteroaryl substrates either halides or amines were tested for the
aminocarbonylation reactions
Scheme 522 CO free aminocarbonylation using Mo(CO)6
Literature reports reveals that alkoxyphenoxycarbonylation and
aminocarbonylation were well explored by using a variety of homogeneous Pd
complexes with different air and moisture sensitive NP containing ligands which had
problems in the recovery and recycling of the expensive palladium catalyst Also there
is no general protocol developed which could efficiently catalyze the carbonylation of
aryl iodide with different nucleophiles such as phenols alcohols and amines Thus
there is a need to develop a chemically well defined air stable single-component Pd-
complex which can efficiently catalyze different carbonylation reactions including
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
Considering this immobilization strategies for metal complex wherein the
metal is coordinated to a ligand grafted on to an inorganic or organic support has been
developed (Lu and Toy 2009 Byun and Lee 2004) Ionic liquids containing metal
ions are considered as catalytic precursors and they can be immobilized on solid
support thus facilitates the reuse of catalyst finding a promising use in organic
transformations (Doorslaer et al 2010 Sasaki et al 2005 Sasaki et al 2008 Zhong
et al 2006) In this regards immobilized palladium metal ion containing ionic liquid
[ImmPd-IL] is explored for alkoxycarbonylation phenoxycarbonylation and
aminocarbonylation reactions
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
227
52 RESULTS AND DISCUSSION
Considering the objective of the development of efficient phosphine free
heterogeneous and recyclable protocol immobilized palladium metal ion containing
ionic liquid (ImmPd-IL) was used as a common catalyst for alkoxycarbonylation
phenoxycarbonylation and aminocarbonylation reactions (Scheme 523) The
methodology offers synthesis of various carbonyl compounds including aliphatic
esters aromatic esters and amides from corresponding alcohol phenol and amines
The protocol is advantageous due to the ease in handling of the catalyst and simple
workup procedure and effective catalyst recyclability
Scheme 523 ImmPd-IL catalyzed different carbonylation reactions
521 Preparation of immobilized palladium metal ion containing ionic liquid
(ImmPd-IL) catalyst
Preparation of immobilized palladium metal ion-containing ionic liquid catalyst
(ImmPd-IL) is a two step process (Scheme 524) The first step involves the anchoring
of ionic liquid on to a silica support which gives immobilized ionic liquid (Imm-IL)
In a second step the synthesized Imm-IL is loaded with palladium metal ion (PdCl2)
which results immobilized palladium ion-containing ionic liquid (ImmPd-IL)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
228
Scheme 524 Preparation of immobilized ImmPd-IL
522 ALKOXYCARBONYLATION REACTIONS
Initially alkoxycarbonylation reaction of aryl iodide with aliphatic alcohols was
studied (Scheme 525)
Scheme 525 ImmPd-IL catalyzed alkoxycarbonylation of aryl iodides with alcohols
The effect of various reaction parameters like base temperature time and CO
pressure using ImmPd-IL as a catalyst was studied (Table 51) The reaction of
iodobenzene with methyl alcohol in presence of CO was chosen as model reaction for
the optimization To study the role of base the reaction was carried out using various
inorganic bases like K2CO3 (80) Cs2CO3 (79) and organic bases like DBU (85)
Et3N (96) (Table 51 entries 1-4) As Et3N provided maximum yield of the methyl
benzoate it was used for further study No profound increase in the yield of methyl
benzoate was observed when the reaction temperature was increased from 80 to 100
degC therefore 80 degC was considered as an optimum reaction temperature for further
studies (Table 51 entries 4-5) When CO pressure was increased from 73 psi to 145
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
229
psi equivalent yield of the desired product was observed (Table 51 entry 6) Hence
the finalized reaction conditions were base Et3N temperature 80 degC solvent
alcohol (also as a nucleophile) time 3 h and 73 psi of CO pressure
Table 51 Effect of bases temperature and time on ImmPd-IL catalyzed
alkoxycarbonylation reactiona
Entry Base Temp
(degC)
CO Press
(psi)
Yield
()b
1 K2CO3 80 73 80
2 Cs2CO3 80 73 79
3 DBU 80 73 85
4 Et3N 80 73 96
5 Et3N 100 73 97
6 Et3N 100 145 98
a Reaction conditions
Iodobenzene (2 mmol) methyl alcohol (5 mL) ImmPd-IL (2
mol ) Et3N (3 mmol) 73 psi CO press Temp (80 degC) Time (3 h) b Yield based on GC analysis
These optimized reaction parameters were then successfully applied to variety
of aryl iodides with different alcohols (Table 52) Model reaction of iodobenzene
with methyl alcohol provided 94 isolated yield of methyl benzoate (Table 52 entry
1) Ethyl alcohol and benzyl alcohol also reacts efficiently with iodobenzene
providing 95 and 89 yield of ethyl benzoate and benzyl benzoate respectively
(Table 52 entries 1-3) The substituted iodobenzene derivatives 4-iodoaniline and 4-
iodophenol furnished 80 and 75 yield of the methyl 4-aminobenzoate and methyl
4-hydroxybenzoate respectively (Table 52 entries 4-5) 4-Acetyliodobenzene reacts
with ethanol and provided 81 yield of ethyl-4-acetylbenzoate (Table 52 entry 6)
Iodonaphthalene furnished 79 yield of methyl 2-naphthoate (Table 52 entry 7)
whereas 1-iodo-4-nitrobenzene efficiently reacts with methyl alcohol furnishing a
moderate yield (70) of methyl 4-nitrobenzoate (Table 52 entry 8)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
230
Table 52 ImmPd-IL catalyzed alkoxycarbonylation of aryl iodides with various
alcoholsa
Entry Aryl iodide Alcohol Product Yield
()b
1
MeOH
94
2
EtOH
95
3
89
4
MeOH
80
5
MeOH
75
6
EtOH
81
7
MeOH
79
8
MeOH
70
a Reaction conditions aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
Et3N (3 mmol) 73 psi CO press Temp (80 degC) Time (3 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
231
It is believed that the supported palladium metal leaches out from the solid
support and goes into the solution at higher temperature and the reaction was
catalyzed mainly by dissolved palladium species (Tambade et al 2008) Hence to
determine whether the reaction was catalyzed due to the ImmPd-IL complex or a
leached palladium metal that comes off the support at higher temperature during the
reaction a hot filtration test was performed (Lempers 1998 Zhao 2009)
Hot filtration experiment was performed for the alkoxycarbonylation of
iodobenzene with benzyl alcohol using ImmPd-IL catalyst Reaction was carried out
at 80 oC during reaction the ImmPd-IL complex catalyst was filtered off and the
filtrate without addition of catalyst was allowed to react further It was found that no
further reaction occurred after this hot filtration procedure hence this experimental
finding suggests there is no palladium leaching from the ImmPd-IL complex during
the progress of a reaction In addition to reconfirm this observation ICP-AES
analysis of the reaction mixture was carried out after 15 and 3 h which revealed a
below detectable level (below 001 ppm) of palladium in solution
It is also important to study the separation and recyclability of the catalyst
The ImmPd-IL catalyst was separated from the reaction mixture by a simple filtration
procedure and was found to be effective up to four consecutive recycles for
methoxycarbonylation reaction (Figure 52) No significant decrease in yield during
recycle study was observed
Figure 52 Recycle study of ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
232
523 PHENOXYCARBONYLATION REACTIONS
ImmPd-IL catalytic system was further explored for the phenoxycarbonylation of aryl
iodides with various phenols to yield corresponding phenyl esters and it was observed
that corresponding products were obtained in good to excellent yields (Scheme 526)
Scheme 526 Phenoxycarbonylation of aryl iodides with phenols using ImmPd-IL
For the optimization of reaction the influence of critical parameters such as
solvent base and CO pressure on the carbonylation of iodobenzene with phenol as a
nucleophile have been investigated (Table 53 entries 1-8)
Table 53 Effect of solvents and bases on ImmPd-IL catalyzed Phenoxycarbonylation
reactiona
Entry Solvent Base CO Press
(psi)
Yield
()b
1 DMF Et3N 145 56
2 14-Dioxane Et3N 145 62
3
Water Et3N 145 0
4 Toluene Et3N 145 90
5 Toluene DBU 145 80
6 Toluene K2CO3 145 66
7 Toluene Cs2CO3 145 72
8 Toluene Et3N 73 85
a Reaction conditions Iodobenzene (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
base (3 mmol) solvent (10 mL) 8 h at 100 degC b Yield based on GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
233
The role of various solvents such as NN-dimethyl formamide (DMF) (56)
14-dioxane (62) water (0) and toluene (90) was studied (Table 53 entries 1-
4) It was observed that the reaction was more favourable using toluene as a solvent
and provided 90 yield of phenyl benzoate (Table 54 entry 4) Various screened
organic and inorganic bases (K2CO3 Cs2CO3 DBU and Et3N) showed Et3N (90) to
be superior base at 100 degC (Table 53 entries 4-7) The initial reaction was carried out
at 145 psi CO pressure which provided 90 yield of phenyl benzoate a further
decrease in CO pressure up to 73 psi decreased the yield of the phenyl benzoate
(Table 53 entry 8) Hence the finalized reaction parameters were Et3N as a base in
toluene CO 73 psi at 100 degC for 8 h
These finalized reaction parameters were then applied for the
phenoxycarbonylation of different aryl halides and phenols having different electron-
donating or withdrawing groups (Table 54 entries 1-7) Iodobenzene reacts
efficiently with phenol within 8 h providing 89 isolated yield of phenyl benzoate
(Table 54 entry 1) Substituted phenols such as p-cresol p-methoxyphenol and p-
chlorophenol reacts with iodobenzene furnishing good to excellent yields of the
corresponding product (Table 54 entries 2-4) The substituted iodobenzene
derivative reacts with phenol and provided 86 yields of phenyl 4-methoxybenzoate
(Table 54 entry 5) 1-Iodo-4-nitrobenzene furnished moderate yield (59) of the
phenyl 4-nitrobenzoate (Table 54 entry 6) Reaction of 1-iodonaphthalene with
phenol provided 75 yield of phenyl 1-naphthoate (Table 54 entry 7)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
234
Table 54 ImmPd-IL catalyzed Phenoxycarbonylation of aryl iodides with various
phenolsa
Entry Aryl iodide Phenol Product Yield
()b
1
89
2
90
3
88
4
84
5
86
6
59
7
75
a Reaction conditions aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
235
524 AMINOCARBONYLATION REACTIONS
The scope of ImmPd-IL was further extended for aminocarbonylation of aryl iodides
with a range of aliphatic aromatic primary and secondary amines (Scheme 527)
Scheme 527 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with amines
The reaction of iodobenzene with aniline was selected as a model reaction for
optimization Various solvents such as DMF (80) water (70) anisole (60) and
toluene (92) were screened for the reaction (ionic liquid was insoluble in water as it
was immobilised on solid support) but toluene was found to be the best solvent
(Table 55 entries 1-4) Screening of a variety of bases showed Et3N (90) to be
superior at 100 degC (Table 55 entries 4-6) Further reaction was optimized with
respect to various reaction parameters including temperature time and CO pressure
and the best optimized reaction conditions were then applied for the
aminocarbonylation of a variety of iodoaryls and amines
Table 55 Effect of solvents and bases on ImmPd-IL catalyzed aminocarbonylation
reactiona
Entry Solvent Base Yield
()b
1 DMF Et3N 80
2 Water Et3N 70
3
Anisole Et3N 60
4 Toluene Et3N 92
5 Toluene Na2CO3 52
6 Toluene K2CO3 57
a Reaction conditions
Iodobenzene (1 mmol) aniline (2 mmol) ImmPd-IL (2 mol)
Et3N (3 mmol) Toluene (10 mL) 8 h at 100 degC 145 psi CO pressure b Yield based GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
236
The optimized reaction parameters were then applied for the
aminocarbonylation of substituted aryl halides and aromatic amines The model
reaction of iodobenzene with aniline provided 90 isolated yield of N-
phenylbenzamide under optimized reaction conditions (Table 56 entry 1) 4-
iodoanisole furnished 85 yield of 4-methoxy-N-phenylbenzamide (Table 56 entries
2) 4-methoxyaniline reacts with iodobenzene and provided 88 yield of N-(4-
methoxyphenyl)benzamide (Table 56 entry 3) 3-(Trifluoromethyl)aniline provided a
moderate yield of the expected product (Table 56 entry 4)
There after various primary aliphatic amines were screened for the
aminocarbonylation Cyclohexyl amine efficiently reacts with iodobenzene and 2-
iodonaphthalene and provided 92 and 80 yield of N-cyclohexylbenzamide and N-
cyclohexyl-1-naphthamide respectively (Table 56 entries 5-6) Reaction of
iodobenzene and 4-iodo acetophenone with tert-butyl amine furnished 92 and 89
yield of respective amide (Table 56 entry 7-8) Benzyl amine provided excellent
yields of N-benzylbenzamide (Table 56 entry 9) To our delight aromatic secondary
amine such as N-methyl aniline efficiently reacts with iodobenzene furnishing 91
yield of N-methyl-N-phenylbenzamide (Table 56 entry 10)
Table 56 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with various
aliphatic and aromatic primary amines and secondary aminesa
Entry Aryl iodide Amine Product Yield
()b
1
90
2
85
3
88
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
237
4
75
5
92
6
80
7
92
8
89
9
90
10
91
a Reaction conditions aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
238
53 CONCLUSION
The present study reports an efficient and common protocol for
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
by using a well-defined heterogeneous ImmPd-IL complex as a versatile
catalyst
The ease of preparation of the complex indefinite shelf life stability towards
air makes it an ideal complex for the above transformations
The reaction system was optimized with respect to various reaction parameters
and applied for carbonylation of a range of aryl iodides with different types of
alcohols phenols and amines furnishing good to excellent yields of the
corresponding products
The present protocol provided high yields of the desired products for all
carbonylation protocols
All the reactions were carried out under milder operating conditions
Catalytic system showed excellent activity and selectivity and effectively
recycled for four consecutive cycles
The leaching of the Pd metal was examined by hot filteration test and ICP-
AES analysis which revels no significant leaching of the palladium occurs
during the reaction
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
239
54 EXPERIMENTAL
541 Materials and Method N-methylimidazole (99+) and 3-trimethoxysilylpropyl
chloride (97+) were purchased from Aldrich PdCl2 was purchased from WAKO
Anhydrous redistilled 1-methylimidazole (99+) was purchased from Aldrich All
the dehydrated solvents were obtained from WAKO Aerosil 300 (300 m2g) was
obtained from Japan Aerosil Co and calcined at 573 K for 15 h in air and 30 min in
vacuum before use as a support The procedures for catalyst preparation were based
previous publication (Sasaki et al 2008) with some modifications Prepared catalyst
was characterized by using IR and elemental analysis and loading of the catalyst was
calculated by XRF measurements (SEA-2010 Seiko Electronic Industrial Co) The
XPS of ImmPd-IL was measured using a PHI5000 Versa Probe with monochromatic
focused (100 times 100 μm) Al Kα X-ray radiation (15 kV 30 mA) and dual beam
neutralization using a combination of argon ion gun and electron irradiation
The products are well-known in the literature and were compared with
authentic samples Progress of the reaction was monitored by gas chromatography
(GC) Gas chromatography analysis was carried out on Perkin-Elmer Clarus 400 GC
equipped flame ionization detector with a capillary column (Elite-1 30 m times 032 mm
times 025 μm) using the external standard method A GCMS-QP 2010 instrument (Rtx-
17 30 m times 25 mm id film thickness 025 μm df) (column flow 2 mL minminus1
80-240
degC at 10 degCmin rise) The 1H NMR spectra were recorded on Varian-300 MHz FT-
NMR spectrometer in CDCl3 using TMS as the internal standard The 13
C NMR
spectra were recorded with a JEOL FT-NMR model-AL300 (75 MHz) spectrometer
in CDCl3 Chemical shifts are reported in parts per million (δ) relative to
tetramethylsilane as the internal standard J (coupling constant) values were reported
in hertz (Hz) Proton splitting patterns are described as s (singlet) d (doublet) t
(triplet) and m (multiplet)
542 Preparation of immobilized palladium metal ion-containing ionic liquid
1-methyl-3-(3-trimethoxysilylpropyl) imidazolium chloride was synthesized by
mixing N-methylimidazole (0690 mol) and 3-trimethoxysilylpropyl chloride (0690
mol) in a dry 300 mL flask under a nitrogen atmosphere and refluxed for 48 h After
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
240
cooling to room temperature the resultant liquid was washed by dehydrated ethyl
acetate five times and dried at room temperature under reduced pressure for 48 h
The obtained compound was stored at 253 K under dry nitrogen Silica (Aerosil 300
surface area 300 m2g calcined at 573 K for 15 h in air) and 1-methyl-3-(3-
trimethoxysilylpropyl) imidazolium chloride (weight ratio 11) was dispersed in
dehydrated toluene and the mixture was refluxed for 48 h under nitrogen
After the reflux toluene was removed by filtration using glass filter and the
excess ionic liquid was removed by washing with dichloromethane several times The
resultant solid is denoted as Imm-IL In the next step Imm-IL was added to an
acetonitrile solution of PdCl2 and refluxed for 24 h Acetonitrile and excess of metal
chloride were removed by washing acetone using glass filter several times The metal
loading of ImmPd-IL was 34 wt as determined by XRF measurements (SEA-2010
Seiko Electronic Industrial Co)
543 General Experimental Procedure for Alkoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
and Et3N (3 mmol) were added The autoclave was closed purged three times with
carbon monoxide pressurized with 73 psi of CO and heated at 80 degC for 3 h After
completion of the reaction the reactor was cooled to room temperature and the
remaining CO gas was carefully vented and the reactor was opened The reactor
vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to remove any traces of
product and catalyst if present The catalyst was filtered and the reaction mixture was
evaporated under vacuum The residue obtained was purified by column
chromatography (silica gel 60-120 mesh petroleum etherethyl acetate 9505) to
afford the desired product
544 General Experimental Procedure for Recycling of ImmPd-IL
After completion of reaction the reaction mixture was cooled to room temperature
and the catalyst was collected by filtration The filtered catalyst was washed with
distilled water (3 times 5 mL) and methanol (3 times 5 mL) to remove all traces of product or
reactant present The filtered catalyst was then dried under reduced pressure The
dried catalyst was then used for the alkoxycarbonylation reaction of iodobenzene with
methanol for the recyclability experiment
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
241
545 XPS spectra of ImmPd-IL catalyst
The XPS spectra of ImmPd-IL shows that two peaks at 337 and 3424 eV for fresh
Imm-Pd are assigned as 3d52 and 3d32 for Pd2+
species respectively (Figure 53)
For the first recycle sample new peaks appear at 3342 and 3392 eV which are
assigned as 3d52 and 3d32 for Pd(0) species respectively indicating that the
reduction of the Pd species takes place during the catalytic reaction From the
spectrum of the fourth recycle sample it is obvious that the component of Pd2+
is
decreasing upon recycles although the component of Pd(0) remains constant
Figure 53 XPS of Pd 3d and Cl 2p for ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
242
546 General Experimental Procedure for Phenoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h After the completion of the reaction the reactor was cooled to room
temperature and the remaining CO gas was carefully vented and the reactor was
opened The reactor vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to
remove any traces of product and catalyst if present The catalyst was filtered and the
reaction mixture was evaporated under vacuum The residue obtained was purified by
column chromatography (silica gel 60-120 mesh petroleum etherethyl acetate
9505) to afford the desired product
547 General Experimental Procedure for Aminocarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol)
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h (the ensuing procedure is the same as that discussed above for the phenoxy
carbonylation reaction)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
243
55 SPECTRAL DATA
Methyl benzoate
GC-MS (EI 70 eV) mz () = 136 [M+] (35) 105 (100) 77 (55) 51 (20)
Ethyl benzoate
GC-MS (EI 70 eV) mz () = 150 [M+] (21) 122 (30) 105 (100) 77 (55)
Benzyl benzoate
1H NMR (300 MHz CDCl3) δ 804-808 (m 2H ArH) 731-752 (m 8H
ArH) 53 (s 2H CH2) 13
C NMR (75 MHz CDCl3) δ 16648 13619 13312
13025 12981 12870 12848 12834 12827 6677
Methyl 4-aminobenzoate
1H NMR (300 MHz CDCl3) δ 783 (d 2H J = 87 Hz ArH) 661 (d 2H J =
87 Hz ArH) 414 (br s 2H NH2) 383 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16724 15107 13151 11927 11368 5155
Methyl 4-hydroxybenzoate
1H NMR (300 MHz CDCl3) δ 794 (d 2H J = 87 Hz ArH) 722 (br s 1H
OH) 690 (d 2H J = 87 Hz ArH) 390 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16778 16055 13203 12201 11539 5223
Methyl 2-naphthoate
1H NMR (300 MHz CDCl3) δ 850 (s 1H ArH) 798-805 (m 2H ArH)
773 (t 2H J = 84 Hz ArH) 754-761 (m 2H ArH) 396 (s 3H OCH3) 13
C NMR
(75 MHz CDCl3) δ 16685 13634 13087 13082 13013 12938 12901 12778
12720 12632 12260 5235
Ethyl 4-acetylbenzoate
1H NMR (300 MHz CDCl3) δ 814-811 (m 2H ArH) 802-799 (m 2H
ArH) 441 (q 2H J = 69Hz CH2CH3) 265 (s 3H COCH3) 142 (t 3H J = 69Hz
CH2CH3) 13
C NMR (75 MHz CDCl3) δ 19766 16576 14012 13424 12977
12817 6147 2689 1427
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
244
Phenyl benzoate
1H NMR (300 MHz CDCl3) δ 825-822 (m 2H ArH) 768-863 (m 1H
ArH) 756-742 (m 4H ArH) 732-723 (m 3H ArH) 13
C NMR (75 MHz CDCl3)
δ 16590 15103 13365 13023 12964 12956 12864 12596 1217 GC-MS (EI
70 eV) mz () = 198 [M+] (9) 105 (100) 77 (40) 51 (9)
phenyl 4-nitrobenzoate
1H NMR (300 MHz CDCl3) δ = 837 (s 4H ArH) 723-748 (m 5H ArH)
13C NMR (75 MHz CDCl3) δ = 16347 15110 15072 13517 13144 12984
12657 12388 12157 GC-MS (EI 70 eV) mz () = 243 [M+] (15) 150 (100) 77
(10)
phenyl 4-methoxybenzoate
1H NMR (300 MHz CDCl3) δ = 814-816 (d 2H J = 87Hz ArH) 720-741
(m 5H ArH) 696-698 (d 2H J = 87 Hz ArH) 386 (s 3H OCH3) GC-MS (EI
70 eV) mz () = 228 [M+] (5) 135 (100) 107 (9) 77 (20)
phenyl-1-naphthoate
1H NMR (300 MHz CDCl3) δ = 904 (d 1H ArH) 845 (d1H ArH) 804
(d 1H ArH) 788 (d 1H ArH) 742-763 (m 5H ArH) 726-728 (m 3H ArH)
13C NMR (70 MHz CDCl3) δ = 16594 15118 13440 13408 13182 13134
12968 12883 12850 12829 12650 12605 12590 12465 12203
N-phenylbenzamide
1H NMR (300 MHz CDCl3) δ 798 (br s 1H NH) 787-883 (m 2H ArH)
763 (d 2H J = 76 Hz ArH) 732-753 (m 5H ArH) 716 (t 1H J = 73 ArH) 13
C
NMR (75 MHz CDCl3) δ 16590 13798 13502 13186 12911 12880 12709
12461 12032 ppm GC-MS mz () = 197 [M+] (42) 105 (100) 77 (54)
4-acetyl-N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 806 (d 2H J = 84Hz ArH) 777 (d 2H J
= 84Hz ArH) 601 (br s 1H NH) 393 (s 3H CH3) 148 (s 9H) 13
C NMR (75
MHz CDCl3) δ 16640 16605 13987 13234 12979 12682 5239 5195 2883
ppm GC-MS (EI 70 eV) mz () = 219 [M+] (20) 186 (22) 148 (100) 130 (30) 76
(20)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
221
For the first time CO free approach for alkoxycarbonylation of aryl halides
was developed by Yamane and co-workers (2011) (Scheme 510) The molybdenum
carbonyl complexes [Mo(CO)6] act as the catalyst and the source of carbon monoxide
(Scheme 510) The reaction was applied for the multi-acylation of polyols and
synthesis of a variety of carboxylic acid derivatives
Scheme 510 Mo(CO)6-mediated alkoxycarbonylation of aryl halides with alcohols
Another CO free approach using alkyl formates was demonstrated by Beller
and group (2010) (Scheme 511) The reaction was carried out by using palladium(II)
acetaten-butylbis(1-adamantly)phosphine (L1) and DBU as base in NMP as a
solvent The protocol was applied for alkoxycarbonylation of various aryl chlorides
Scheme 511 CO free alkoxycarbonylation of aryl halides using aryl formates
Recently for the first time Zhang et al (2012) reported transition-metal-free
alkoxycarbonylation of aryl halides using Potassium tert-butoxide (KOtBu) and high
pressure of carbon monoxide (Scheme 512) Moreover electron paramagnetic
resonance (EPR) experiments were conducted to study the reaction mechanism which
revealed participation of radicals in the reaction system The major drawback of the
protocol was the use of benzene as a solvent requirement of very high CO pressure
and of longer reaction time
Scheme 512 Transition metal free alkoxycarbonylation of aryl halides
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
222
512 AMINOCARBONYLATION REACTION
An aminocarbonylation reaction refers to the carbonylation reaction in which amine
as a nucleophile reacts with aryl halide in the presence of carbon monoxide which
gives amide as a major product Depending upon the amine employed one can get a
variety of aromatic aliphatic and heterocyclic amides
Gee and co-workers (2006) showed the application of microfluidic device for
the rapid synthesis of amides via aminocarbonylation reactions (Scheme 513) They
showed application of microstructure device for first time to perform a gas-liquid
carbonylation reaction The reaction was carriedout on a glass-fabricated Microchip
using Pd(dppp)Cl2 as a catalyst
Scheme 513 Pd phosphine catalyzed aminocarbonylation reaction
Whittall and group (2007) explored Bedford-type palladacycle complex (1) in
combination with Bis(diphenylphosphino)ferrocene ligand (dppf) for the
aminocarbonylation and alkoxycarbonylation reactions (Scheme 514) This palladium
complex acted as highly active catalysts for both the reactions showing compatibility
with a wide variety of substrates
Scheme 514 Palladacycle complex catalyzed carbonylation reactions
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
223
A method for the aminocarbonylation of aryl bromide using xantphos as a
ligand has been reported recently by Buchwald and group (2008) (Scheme 515) The
method was effective for the direct synthesis of Weinreb amides 1ry
and 2ry
benzamides and methyl esters from the corresponding aryl bromides at atmospheric
pressure of CO The catalytic system was applied for variety of substrates providing
good to excellent yield of desired carbonylated products In addition a putative
catalytic intermediate (Xantphos)Pd(Br)benzoyl was synthesized and an X-ray crystal
structure was also provided This crystal structure revealed that this species possess a
cis-coordinated palladium centre
Scheme 515 Pd(OAc)2 Xantphos catalyzed aminocarbonylation reaction
Kumar et al (2004) demonstrated the aminocarbonylation of unprotected
indoles with different N- and O-nucleophiles using Pddppf as a catalyst (Scheme
516) Various indole carboxylic acid derivatives were accessible in excellent yield
For example aminocarbonylation of 4- 5- 6- or 7-bromoindole with arylethyl
piperazines provided a direct one-step synthesis for CNS active amphetamine
derivatives
Scheme 516 Pd dppf catalyzed aminocarbonylation of bromoindoles
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
224
Pd-catalyzed aminocarbonylation of heteroaryl halides using monodentate
ligand di-tert-butylphosphinoferrocene tetrafluoroborate has been developed by
Senanayake and co-workers (2009) (Scheme 517) The developed protocol was
successfully applied for the preparation of a series of heteroaromatic amide
derivatives in good yields
Scheme 517 Pd P(Fc)(t-Bu)2HBF4 catalyzed aminocarbonylation
Kollar and group reported (2007) Pd(OAc)2PPh3 catalyzed protocol for the
aminocarbonylation of heteroaryl iodides (Scheme 518) Various primary and
secondary amines including amino acid methyl esters were used as nucleophiles in
palladium-catalyzed aminocarbonylation of 2-iodopyridine 3-iodopyridine and
iodopyrazine The reaction works well with variety of nucleophiles having electron-
rich and electron-poor substituents
Scheme 518 Pd(OAc)2PPh3 catalyzed aminocarbonylation of heteroaryl iodides
Well-dispersed palladium(0) nanoparticles stabilized with phosphonium based
ionic liquid were synthesized and explored for the aminocarbonylation reaction of aryl
iodide in ionic liquid media by Zhu et al (2011) (Scheme 519) Different derivatives
of amides were synthesized from corresponding aryl halide and aryl amines
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
225
Scheme 519 Pd(0) nanoparticles catalyzed aminocarbonylation of heteroaryl iodides
An efficient methodology for the synthesis of amides via palladium-catalyzed
aminocarbonylation of aryl iodides was reported by Castill et al (2012) using the
bulky cis-12-bis[(di-tert-butylphosphino)methyl]cyclohexane ligand under
atmospheric pressure of carbon monoxide (Scheme 520) A broad range of iodoaryl
derivatives with different amine were screened
Scheme 520 PdP(Fc)(t-Bu)2 catalyzed aminocarbonylation
Recently Dang et al (2012) reported an aminocarbonylation of aryl iodides
using palladium nanoparticles supported on MOF-5 (metal-organic frameworks)
(Scheme 521) Various palladium supported catalysts using different solid supports
like Silica Al2O3 and MOF has been synthesized but palladium catalyst supported on
MOF-5 provided better results The developed catalytic system worked under
atmospheric pressure of carbon monoxide and was applied for the synthesis of various
substituted amides furthermore the catalyst was also recycled
Scheme 521 Pd nanoparticles supported on MOF-5 catalyzed aminocarbonylation
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
226
Begouin et al (2009) have demonstrated that [Mo(CO)6] can be successfully
used as a CO source in aminocarbonylation reactions (Scheme 522) Range of aryl
and heteroaryl substrates either halides or amines were tested for the
aminocarbonylation reactions
Scheme 522 CO free aminocarbonylation using Mo(CO)6
Literature reports reveals that alkoxyphenoxycarbonylation and
aminocarbonylation were well explored by using a variety of homogeneous Pd
complexes with different air and moisture sensitive NP containing ligands which had
problems in the recovery and recycling of the expensive palladium catalyst Also there
is no general protocol developed which could efficiently catalyze the carbonylation of
aryl iodide with different nucleophiles such as phenols alcohols and amines Thus
there is a need to develop a chemically well defined air stable single-component Pd-
complex which can efficiently catalyze different carbonylation reactions including
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
Considering this immobilization strategies for metal complex wherein the
metal is coordinated to a ligand grafted on to an inorganic or organic support has been
developed (Lu and Toy 2009 Byun and Lee 2004) Ionic liquids containing metal
ions are considered as catalytic precursors and they can be immobilized on solid
support thus facilitates the reuse of catalyst finding a promising use in organic
transformations (Doorslaer et al 2010 Sasaki et al 2005 Sasaki et al 2008 Zhong
et al 2006) In this regards immobilized palladium metal ion containing ionic liquid
[ImmPd-IL] is explored for alkoxycarbonylation phenoxycarbonylation and
aminocarbonylation reactions
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
227
52 RESULTS AND DISCUSSION
Considering the objective of the development of efficient phosphine free
heterogeneous and recyclable protocol immobilized palladium metal ion containing
ionic liquid (ImmPd-IL) was used as a common catalyst for alkoxycarbonylation
phenoxycarbonylation and aminocarbonylation reactions (Scheme 523) The
methodology offers synthesis of various carbonyl compounds including aliphatic
esters aromatic esters and amides from corresponding alcohol phenol and amines
The protocol is advantageous due to the ease in handling of the catalyst and simple
workup procedure and effective catalyst recyclability
Scheme 523 ImmPd-IL catalyzed different carbonylation reactions
521 Preparation of immobilized palladium metal ion containing ionic liquid
(ImmPd-IL) catalyst
Preparation of immobilized palladium metal ion-containing ionic liquid catalyst
(ImmPd-IL) is a two step process (Scheme 524) The first step involves the anchoring
of ionic liquid on to a silica support which gives immobilized ionic liquid (Imm-IL)
In a second step the synthesized Imm-IL is loaded with palladium metal ion (PdCl2)
which results immobilized palladium ion-containing ionic liquid (ImmPd-IL)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
228
Scheme 524 Preparation of immobilized ImmPd-IL
522 ALKOXYCARBONYLATION REACTIONS
Initially alkoxycarbonylation reaction of aryl iodide with aliphatic alcohols was
studied (Scheme 525)
Scheme 525 ImmPd-IL catalyzed alkoxycarbonylation of aryl iodides with alcohols
The effect of various reaction parameters like base temperature time and CO
pressure using ImmPd-IL as a catalyst was studied (Table 51) The reaction of
iodobenzene with methyl alcohol in presence of CO was chosen as model reaction for
the optimization To study the role of base the reaction was carried out using various
inorganic bases like K2CO3 (80) Cs2CO3 (79) and organic bases like DBU (85)
Et3N (96) (Table 51 entries 1-4) As Et3N provided maximum yield of the methyl
benzoate it was used for further study No profound increase in the yield of methyl
benzoate was observed when the reaction temperature was increased from 80 to 100
degC therefore 80 degC was considered as an optimum reaction temperature for further
studies (Table 51 entries 4-5) When CO pressure was increased from 73 psi to 145
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
229
psi equivalent yield of the desired product was observed (Table 51 entry 6) Hence
the finalized reaction conditions were base Et3N temperature 80 degC solvent
alcohol (also as a nucleophile) time 3 h and 73 psi of CO pressure
Table 51 Effect of bases temperature and time on ImmPd-IL catalyzed
alkoxycarbonylation reactiona
Entry Base Temp
(degC)
CO Press
(psi)
Yield
()b
1 K2CO3 80 73 80
2 Cs2CO3 80 73 79
3 DBU 80 73 85
4 Et3N 80 73 96
5 Et3N 100 73 97
6 Et3N 100 145 98
a Reaction conditions
Iodobenzene (2 mmol) methyl alcohol (5 mL) ImmPd-IL (2
mol ) Et3N (3 mmol) 73 psi CO press Temp (80 degC) Time (3 h) b Yield based on GC analysis
These optimized reaction parameters were then successfully applied to variety
of aryl iodides with different alcohols (Table 52) Model reaction of iodobenzene
with methyl alcohol provided 94 isolated yield of methyl benzoate (Table 52 entry
1) Ethyl alcohol and benzyl alcohol also reacts efficiently with iodobenzene
providing 95 and 89 yield of ethyl benzoate and benzyl benzoate respectively
(Table 52 entries 1-3) The substituted iodobenzene derivatives 4-iodoaniline and 4-
iodophenol furnished 80 and 75 yield of the methyl 4-aminobenzoate and methyl
4-hydroxybenzoate respectively (Table 52 entries 4-5) 4-Acetyliodobenzene reacts
with ethanol and provided 81 yield of ethyl-4-acetylbenzoate (Table 52 entry 6)
Iodonaphthalene furnished 79 yield of methyl 2-naphthoate (Table 52 entry 7)
whereas 1-iodo-4-nitrobenzene efficiently reacts with methyl alcohol furnishing a
moderate yield (70) of methyl 4-nitrobenzoate (Table 52 entry 8)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
230
Table 52 ImmPd-IL catalyzed alkoxycarbonylation of aryl iodides with various
alcoholsa
Entry Aryl iodide Alcohol Product Yield
()b
1
MeOH
94
2
EtOH
95
3
89
4
MeOH
80
5
MeOH
75
6
EtOH
81
7
MeOH
79
8
MeOH
70
a Reaction conditions aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
Et3N (3 mmol) 73 psi CO press Temp (80 degC) Time (3 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
231
It is believed that the supported palladium metal leaches out from the solid
support and goes into the solution at higher temperature and the reaction was
catalyzed mainly by dissolved palladium species (Tambade et al 2008) Hence to
determine whether the reaction was catalyzed due to the ImmPd-IL complex or a
leached palladium metal that comes off the support at higher temperature during the
reaction a hot filtration test was performed (Lempers 1998 Zhao 2009)
Hot filtration experiment was performed for the alkoxycarbonylation of
iodobenzene with benzyl alcohol using ImmPd-IL catalyst Reaction was carried out
at 80 oC during reaction the ImmPd-IL complex catalyst was filtered off and the
filtrate without addition of catalyst was allowed to react further It was found that no
further reaction occurred after this hot filtration procedure hence this experimental
finding suggests there is no palladium leaching from the ImmPd-IL complex during
the progress of a reaction In addition to reconfirm this observation ICP-AES
analysis of the reaction mixture was carried out after 15 and 3 h which revealed a
below detectable level (below 001 ppm) of palladium in solution
It is also important to study the separation and recyclability of the catalyst
The ImmPd-IL catalyst was separated from the reaction mixture by a simple filtration
procedure and was found to be effective up to four consecutive recycles for
methoxycarbonylation reaction (Figure 52) No significant decrease in yield during
recycle study was observed
Figure 52 Recycle study of ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
232
523 PHENOXYCARBONYLATION REACTIONS
ImmPd-IL catalytic system was further explored for the phenoxycarbonylation of aryl
iodides with various phenols to yield corresponding phenyl esters and it was observed
that corresponding products were obtained in good to excellent yields (Scheme 526)
Scheme 526 Phenoxycarbonylation of aryl iodides with phenols using ImmPd-IL
For the optimization of reaction the influence of critical parameters such as
solvent base and CO pressure on the carbonylation of iodobenzene with phenol as a
nucleophile have been investigated (Table 53 entries 1-8)
Table 53 Effect of solvents and bases on ImmPd-IL catalyzed Phenoxycarbonylation
reactiona
Entry Solvent Base CO Press
(psi)
Yield
()b
1 DMF Et3N 145 56
2 14-Dioxane Et3N 145 62
3
Water Et3N 145 0
4 Toluene Et3N 145 90
5 Toluene DBU 145 80
6 Toluene K2CO3 145 66
7 Toluene Cs2CO3 145 72
8 Toluene Et3N 73 85
a Reaction conditions Iodobenzene (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
base (3 mmol) solvent (10 mL) 8 h at 100 degC b Yield based on GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
233
The role of various solvents such as NN-dimethyl formamide (DMF) (56)
14-dioxane (62) water (0) and toluene (90) was studied (Table 53 entries 1-
4) It was observed that the reaction was more favourable using toluene as a solvent
and provided 90 yield of phenyl benzoate (Table 54 entry 4) Various screened
organic and inorganic bases (K2CO3 Cs2CO3 DBU and Et3N) showed Et3N (90) to
be superior base at 100 degC (Table 53 entries 4-7) The initial reaction was carried out
at 145 psi CO pressure which provided 90 yield of phenyl benzoate a further
decrease in CO pressure up to 73 psi decreased the yield of the phenyl benzoate
(Table 53 entry 8) Hence the finalized reaction parameters were Et3N as a base in
toluene CO 73 psi at 100 degC for 8 h
These finalized reaction parameters were then applied for the
phenoxycarbonylation of different aryl halides and phenols having different electron-
donating or withdrawing groups (Table 54 entries 1-7) Iodobenzene reacts
efficiently with phenol within 8 h providing 89 isolated yield of phenyl benzoate
(Table 54 entry 1) Substituted phenols such as p-cresol p-methoxyphenol and p-
chlorophenol reacts with iodobenzene furnishing good to excellent yields of the
corresponding product (Table 54 entries 2-4) The substituted iodobenzene
derivative reacts with phenol and provided 86 yields of phenyl 4-methoxybenzoate
(Table 54 entry 5) 1-Iodo-4-nitrobenzene furnished moderate yield (59) of the
phenyl 4-nitrobenzoate (Table 54 entry 6) Reaction of 1-iodonaphthalene with
phenol provided 75 yield of phenyl 1-naphthoate (Table 54 entry 7)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
234
Table 54 ImmPd-IL catalyzed Phenoxycarbonylation of aryl iodides with various
phenolsa
Entry Aryl iodide Phenol Product Yield
()b
1
89
2
90
3
88
4
84
5
86
6
59
7
75
a Reaction conditions aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
235
524 AMINOCARBONYLATION REACTIONS
The scope of ImmPd-IL was further extended for aminocarbonylation of aryl iodides
with a range of aliphatic aromatic primary and secondary amines (Scheme 527)
Scheme 527 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with amines
The reaction of iodobenzene with aniline was selected as a model reaction for
optimization Various solvents such as DMF (80) water (70) anisole (60) and
toluene (92) were screened for the reaction (ionic liquid was insoluble in water as it
was immobilised on solid support) but toluene was found to be the best solvent
(Table 55 entries 1-4) Screening of a variety of bases showed Et3N (90) to be
superior at 100 degC (Table 55 entries 4-6) Further reaction was optimized with
respect to various reaction parameters including temperature time and CO pressure
and the best optimized reaction conditions were then applied for the
aminocarbonylation of a variety of iodoaryls and amines
Table 55 Effect of solvents and bases on ImmPd-IL catalyzed aminocarbonylation
reactiona
Entry Solvent Base Yield
()b
1 DMF Et3N 80
2 Water Et3N 70
3
Anisole Et3N 60
4 Toluene Et3N 92
5 Toluene Na2CO3 52
6 Toluene K2CO3 57
a Reaction conditions
Iodobenzene (1 mmol) aniline (2 mmol) ImmPd-IL (2 mol)
Et3N (3 mmol) Toluene (10 mL) 8 h at 100 degC 145 psi CO pressure b Yield based GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
236
The optimized reaction parameters were then applied for the
aminocarbonylation of substituted aryl halides and aromatic amines The model
reaction of iodobenzene with aniline provided 90 isolated yield of N-
phenylbenzamide under optimized reaction conditions (Table 56 entry 1) 4-
iodoanisole furnished 85 yield of 4-methoxy-N-phenylbenzamide (Table 56 entries
2) 4-methoxyaniline reacts with iodobenzene and provided 88 yield of N-(4-
methoxyphenyl)benzamide (Table 56 entry 3) 3-(Trifluoromethyl)aniline provided a
moderate yield of the expected product (Table 56 entry 4)
There after various primary aliphatic amines were screened for the
aminocarbonylation Cyclohexyl amine efficiently reacts with iodobenzene and 2-
iodonaphthalene and provided 92 and 80 yield of N-cyclohexylbenzamide and N-
cyclohexyl-1-naphthamide respectively (Table 56 entries 5-6) Reaction of
iodobenzene and 4-iodo acetophenone with tert-butyl amine furnished 92 and 89
yield of respective amide (Table 56 entry 7-8) Benzyl amine provided excellent
yields of N-benzylbenzamide (Table 56 entry 9) To our delight aromatic secondary
amine such as N-methyl aniline efficiently reacts with iodobenzene furnishing 91
yield of N-methyl-N-phenylbenzamide (Table 56 entry 10)
Table 56 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with various
aliphatic and aromatic primary amines and secondary aminesa
Entry Aryl iodide Amine Product Yield
()b
1
90
2
85
3
88
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
237
4
75
5
92
6
80
7
92
8
89
9
90
10
91
a Reaction conditions aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
238
53 CONCLUSION
The present study reports an efficient and common protocol for
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
by using a well-defined heterogeneous ImmPd-IL complex as a versatile
catalyst
The ease of preparation of the complex indefinite shelf life stability towards
air makes it an ideal complex for the above transformations
The reaction system was optimized with respect to various reaction parameters
and applied for carbonylation of a range of aryl iodides with different types of
alcohols phenols and amines furnishing good to excellent yields of the
corresponding products
The present protocol provided high yields of the desired products for all
carbonylation protocols
All the reactions were carried out under milder operating conditions
Catalytic system showed excellent activity and selectivity and effectively
recycled for four consecutive cycles
The leaching of the Pd metal was examined by hot filteration test and ICP-
AES analysis which revels no significant leaching of the palladium occurs
during the reaction
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
239
54 EXPERIMENTAL
541 Materials and Method N-methylimidazole (99+) and 3-trimethoxysilylpropyl
chloride (97+) were purchased from Aldrich PdCl2 was purchased from WAKO
Anhydrous redistilled 1-methylimidazole (99+) was purchased from Aldrich All
the dehydrated solvents were obtained from WAKO Aerosil 300 (300 m2g) was
obtained from Japan Aerosil Co and calcined at 573 K for 15 h in air and 30 min in
vacuum before use as a support The procedures for catalyst preparation were based
previous publication (Sasaki et al 2008) with some modifications Prepared catalyst
was characterized by using IR and elemental analysis and loading of the catalyst was
calculated by XRF measurements (SEA-2010 Seiko Electronic Industrial Co) The
XPS of ImmPd-IL was measured using a PHI5000 Versa Probe with monochromatic
focused (100 times 100 μm) Al Kα X-ray radiation (15 kV 30 mA) and dual beam
neutralization using a combination of argon ion gun and electron irradiation
The products are well-known in the literature and were compared with
authentic samples Progress of the reaction was monitored by gas chromatography
(GC) Gas chromatography analysis was carried out on Perkin-Elmer Clarus 400 GC
equipped flame ionization detector with a capillary column (Elite-1 30 m times 032 mm
times 025 μm) using the external standard method A GCMS-QP 2010 instrument (Rtx-
17 30 m times 25 mm id film thickness 025 μm df) (column flow 2 mL minminus1
80-240
degC at 10 degCmin rise) The 1H NMR spectra were recorded on Varian-300 MHz FT-
NMR spectrometer in CDCl3 using TMS as the internal standard The 13
C NMR
spectra were recorded with a JEOL FT-NMR model-AL300 (75 MHz) spectrometer
in CDCl3 Chemical shifts are reported in parts per million (δ) relative to
tetramethylsilane as the internal standard J (coupling constant) values were reported
in hertz (Hz) Proton splitting patterns are described as s (singlet) d (doublet) t
(triplet) and m (multiplet)
542 Preparation of immobilized palladium metal ion-containing ionic liquid
1-methyl-3-(3-trimethoxysilylpropyl) imidazolium chloride was synthesized by
mixing N-methylimidazole (0690 mol) and 3-trimethoxysilylpropyl chloride (0690
mol) in a dry 300 mL flask under a nitrogen atmosphere and refluxed for 48 h After
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
240
cooling to room temperature the resultant liquid was washed by dehydrated ethyl
acetate five times and dried at room temperature under reduced pressure for 48 h
The obtained compound was stored at 253 K under dry nitrogen Silica (Aerosil 300
surface area 300 m2g calcined at 573 K for 15 h in air) and 1-methyl-3-(3-
trimethoxysilylpropyl) imidazolium chloride (weight ratio 11) was dispersed in
dehydrated toluene and the mixture was refluxed for 48 h under nitrogen
After the reflux toluene was removed by filtration using glass filter and the
excess ionic liquid was removed by washing with dichloromethane several times The
resultant solid is denoted as Imm-IL In the next step Imm-IL was added to an
acetonitrile solution of PdCl2 and refluxed for 24 h Acetonitrile and excess of metal
chloride were removed by washing acetone using glass filter several times The metal
loading of ImmPd-IL was 34 wt as determined by XRF measurements (SEA-2010
Seiko Electronic Industrial Co)
543 General Experimental Procedure for Alkoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
and Et3N (3 mmol) were added The autoclave was closed purged three times with
carbon monoxide pressurized with 73 psi of CO and heated at 80 degC for 3 h After
completion of the reaction the reactor was cooled to room temperature and the
remaining CO gas was carefully vented and the reactor was opened The reactor
vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to remove any traces of
product and catalyst if present The catalyst was filtered and the reaction mixture was
evaporated under vacuum The residue obtained was purified by column
chromatography (silica gel 60-120 mesh petroleum etherethyl acetate 9505) to
afford the desired product
544 General Experimental Procedure for Recycling of ImmPd-IL
After completion of reaction the reaction mixture was cooled to room temperature
and the catalyst was collected by filtration The filtered catalyst was washed with
distilled water (3 times 5 mL) and methanol (3 times 5 mL) to remove all traces of product or
reactant present The filtered catalyst was then dried under reduced pressure The
dried catalyst was then used for the alkoxycarbonylation reaction of iodobenzene with
methanol for the recyclability experiment
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
241
545 XPS spectra of ImmPd-IL catalyst
The XPS spectra of ImmPd-IL shows that two peaks at 337 and 3424 eV for fresh
Imm-Pd are assigned as 3d52 and 3d32 for Pd2+
species respectively (Figure 53)
For the first recycle sample new peaks appear at 3342 and 3392 eV which are
assigned as 3d52 and 3d32 for Pd(0) species respectively indicating that the
reduction of the Pd species takes place during the catalytic reaction From the
spectrum of the fourth recycle sample it is obvious that the component of Pd2+
is
decreasing upon recycles although the component of Pd(0) remains constant
Figure 53 XPS of Pd 3d and Cl 2p for ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
242
546 General Experimental Procedure for Phenoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h After the completion of the reaction the reactor was cooled to room
temperature and the remaining CO gas was carefully vented and the reactor was
opened The reactor vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to
remove any traces of product and catalyst if present The catalyst was filtered and the
reaction mixture was evaporated under vacuum The residue obtained was purified by
column chromatography (silica gel 60-120 mesh petroleum etherethyl acetate
9505) to afford the desired product
547 General Experimental Procedure for Aminocarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol)
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h (the ensuing procedure is the same as that discussed above for the phenoxy
carbonylation reaction)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
243
55 SPECTRAL DATA
Methyl benzoate
GC-MS (EI 70 eV) mz () = 136 [M+] (35) 105 (100) 77 (55) 51 (20)
Ethyl benzoate
GC-MS (EI 70 eV) mz () = 150 [M+] (21) 122 (30) 105 (100) 77 (55)
Benzyl benzoate
1H NMR (300 MHz CDCl3) δ 804-808 (m 2H ArH) 731-752 (m 8H
ArH) 53 (s 2H CH2) 13
C NMR (75 MHz CDCl3) δ 16648 13619 13312
13025 12981 12870 12848 12834 12827 6677
Methyl 4-aminobenzoate
1H NMR (300 MHz CDCl3) δ 783 (d 2H J = 87 Hz ArH) 661 (d 2H J =
87 Hz ArH) 414 (br s 2H NH2) 383 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16724 15107 13151 11927 11368 5155
Methyl 4-hydroxybenzoate
1H NMR (300 MHz CDCl3) δ 794 (d 2H J = 87 Hz ArH) 722 (br s 1H
OH) 690 (d 2H J = 87 Hz ArH) 390 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16778 16055 13203 12201 11539 5223
Methyl 2-naphthoate
1H NMR (300 MHz CDCl3) δ 850 (s 1H ArH) 798-805 (m 2H ArH)
773 (t 2H J = 84 Hz ArH) 754-761 (m 2H ArH) 396 (s 3H OCH3) 13
C NMR
(75 MHz CDCl3) δ 16685 13634 13087 13082 13013 12938 12901 12778
12720 12632 12260 5235
Ethyl 4-acetylbenzoate
1H NMR (300 MHz CDCl3) δ 814-811 (m 2H ArH) 802-799 (m 2H
ArH) 441 (q 2H J = 69Hz CH2CH3) 265 (s 3H COCH3) 142 (t 3H J = 69Hz
CH2CH3) 13
C NMR (75 MHz CDCl3) δ 19766 16576 14012 13424 12977
12817 6147 2689 1427
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
244
Phenyl benzoate
1H NMR (300 MHz CDCl3) δ 825-822 (m 2H ArH) 768-863 (m 1H
ArH) 756-742 (m 4H ArH) 732-723 (m 3H ArH) 13
C NMR (75 MHz CDCl3)
δ 16590 15103 13365 13023 12964 12956 12864 12596 1217 GC-MS (EI
70 eV) mz () = 198 [M+] (9) 105 (100) 77 (40) 51 (9)
phenyl 4-nitrobenzoate
1H NMR (300 MHz CDCl3) δ = 837 (s 4H ArH) 723-748 (m 5H ArH)
13C NMR (75 MHz CDCl3) δ = 16347 15110 15072 13517 13144 12984
12657 12388 12157 GC-MS (EI 70 eV) mz () = 243 [M+] (15) 150 (100) 77
(10)
phenyl 4-methoxybenzoate
1H NMR (300 MHz CDCl3) δ = 814-816 (d 2H J = 87Hz ArH) 720-741
(m 5H ArH) 696-698 (d 2H J = 87 Hz ArH) 386 (s 3H OCH3) GC-MS (EI
70 eV) mz () = 228 [M+] (5) 135 (100) 107 (9) 77 (20)
phenyl-1-naphthoate
1H NMR (300 MHz CDCl3) δ = 904 (d 1H ArH) 845 (d1H ArH) 804
(d 1H ArH) 788 (d 1H ArH) 742-763 (m 5H ArH) 726-728 (m 3H ArH)
13C NMR (70 MHz CDCl3) δ = 16594 15118 13440 13408 13182 13134
12968 12883 12850 12829 12650 12605 12590 12465 12203
N-phenylbenzamide
1H NMR (300 MHz CDCl3) δ 798 (br s 1H NH) 787-883 (m 2H ArH)
763 (d 2H J = 76 Hz ArH) 732-753 (m 5H ArH) 716 (t 1H J = 73 ArH) 13
C
NMR (75 MHz CDCl3) δ 16590 13798 13502 13186 12911 12880 12709
12461 12032 ppm GC-MS mz () = 197 [M+] (42) 105 (100) 77 (54)
4-acetyl-N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 806 (d 2H J = 84Hz ArH) 777 (d 2H J
= 84Hz ArH) 601 (br s 1H NH) 393 (s 3H CH3) 148 (s 9H) 13
C NMR (75
MHz CDCl3) δ 16640 16605 13987 13234 12979 12682 5239 5195 2883
ppm GC-MS (EI 70 eV) mz () = 219 [M+] (20) 186 (22) 148 (100) 130 (30) 76
(20)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
222
512 AMINOCARBONYLATION REACTION
An aminocarbonylation reaction refers to the carbonylation reaction in which amine
as a nucleophile reacts with aryl halide in the presence of carbon monoxide which
gives amide as a major product Depending upon the amine employed one can get a
variety of aromatic aliphatic and heterocyclic amides
Gee and co-workers (2006) showed the application of microfluidic device for
the rapid synthesis of amides via aminocarbonylation reactions (Scheme 513) They
showed application of microstructure device for first time to perform a gas-liquid
carbonylation reaction The reaction was carriedout on a glass-fabricated Microchip
using Pd(dppp)Cl2 as a catalyst
Scheme 513 Pd phosphine catalyzed aminocarbonylation reaction
Whittall and group (2007) explored Bedford-type palladacycle complex (1) in
combination with Bis(diphenylphosphino)ferrocene ligand (dppf) for the
aminocarbonylation and alkoxycarbonylation reactions (Scheme 514) This palladium
complex acted as highly active catalysts for both the reactions showing compatibility
with a wide variety of substrates
Scheme 514 Palladacycle complex catalyzed carbonylation reactions
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
223
A method for the aminocarbonylation of aryl bromide using xantphos as a
ligand has been reported recently by Buchwald and group (2008) (Scheme 515) The
method was effective for the direct synthesis of Weinreb amides 1ry
and 2ry
benzamides and methyl esters from the corresponding aryl bromides at atmospheric
pressure of CO The catalytic system was applied for variety of substrates providing
good to excellent yield of desired carbonylated products In addition a putative
catalytic intermediate (Xantphos)Pd(Br)benzoyl was synthesized and an X-ray crystal
structure was also provided This crystal structure revealed that this species possess a
cis-coordinated palladium centre
Scheme 515 Pd(OAc)2 Xantphos catalyzed aminocarbonylation reaction
Kumar et al (2004) demonstrated the aminocarbonylation of unprotected
indoles with different N- and O-nucleophiles using Pddppf as a catalyst (Scheme
516) Various indole carboxylic acid derivatives were accessible in excellent yield
For example aminocarbonylation of 4- 5- 6- or 7-bromoindole with arylethyl
piperazines provided a direct one-step synthesis for CNS active amphetamine
derivatives
Scheme 516 Pd dppf catalyzed aminocarbonylation of bromoindoles
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
224
Pd-catalyzed aminocarbonylation of heteroaryl halides using monodentate
ligand di-tert-butylphosphinoferrocene tetrafluoroborate has been developed by
Senanayake and co-workers (2009) (Scheme 517) The developed protocol was
successfully applied for the preparation of a series of heteroaromatic amide
derivatives in good yields
Scheme 517 Pd P(Fc)(t-Bu)2HBF4 catalyzed aminocarbonylation
Kollar and group reported (2007) Pd(OAc)2PPh3 catalyzed protocol for the
aminocarbonylation of heteroaryl iodides (Scheme 518) Various primary and
secondary amines including amino acid methyl esters were used as nucleophiles in
palladium-catalyzed aminocarbonylation of 2-iodopyridine 3-iodopyridine and
iodopyrazine The reaction works well with variety of nucleophiles having electron-
rich and electron-poor substituents
Scheme 518 Pd(OAc)2PPh3 catalyzed aminocarbonylation of heteroaryl iodides
Well-dispersed palladium(0) nanoparticles stabilized with phosphonium based
ionic liquid were synthesized and explored for the aminocarbonylation reaction of aryl
iodide in ionic liquid media by Zhu et al (2011) (Scheme 519) Different derivatives
of amides were synthesized from corresponding aryl halide and aryl amines
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
225
Scheme 519 Pd(0) nanoparticles catalyzed aminocarbonylation of heteroaryl iodides
An efficient methodology for the synthesis of amides via palladium-catalyzed
aminocarbonylation of aryl iodides was reported by Castill et al (2012) using the
bulky cis-12-bis[(di-tert-butylphosphino)methyl]cyclohexane ligand under
atmospheric pressure of carbon monoxide (Scheme 520) A broad range of iodoaryl
derivatives with different amine were screened
Scheme 520 PdP(Fc)(t-Bu)2 catalyzed aminocarbonylation
Recently Dang et al (2012) reported an aminocarbonylation of aryl iodides
using palladium nanoparticles supported on MOF-5 (metal-organic frameworks)
(Scheme 521) Various palladium supported catalysts using different solid supports
like Silica Al2O3 and MOF has been synthesized but palladium catalyst supported on
MOF-5 provided better results The developed catalytic system worked under
atmospheric pressure of carbon monoxide and was applied for the synthesis of various
substituted amides furthermore the catalyst was also recycled
Scheme 521 Pd nanoparticles supported on MOF-5 catalyzed aminocarbonylation
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
226
Begouin et al (2009) have demonstrated that [Mo(CO)6] can be successfully
used as a CO source in aminocarbonylation reactions (Scheme 522) Range of aryl
and heteroaryl substrates either halides or amines were tested for the
aminocarbonylation reactions
Scheme 522 CO free aminocarbonylation using Mo(CO)6
Literature reports reveals that alkoxyphenoxycarbonylation and
aminocarbonylation were well explored by using a variety of homogeneous Pd
complexes with different air and moisture sensitive NP containing ligands which had
problems in the recovery and recycling of the expensive palladium catalyst Also there
is no general protocol developed which could efficiently catalyze the carbonylation of
aryl iodide with different nucleophiles such as phenols alcohols and amines Thus
there is a need to develop a chemically well defined air stable single-component Pd-
complex which can efficiently catalyze different carbonylation reactions including
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
Considering this immobilization strategies for metal complex wherein the
metal is coordinated to a ligand grafted on to an inorganic or organic support has been
developed (Lu and Toy 2009 Byun and Lee 2004) Ionic liquids containing metal
ions are considered as catalytic precursors and they can be immobilized on solid
support thus facilitates the reuse of catalyst finding a promising use in organic
transformations (Doorslaer et al 2010 Sasaki et al 2005 Sasaki et al 2008 Zhong
et al 2006) In this regards immobilized palladium metal ion containing ionic liquid
[ImmPd-IL] is explored for alkoxycarbonylation phenoxycarbonylation and
aminocarbonylation reactions
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
227
52 RESULTS AND DISCUSSION
Considering the objective of the development of efficient phosphine free
heterogeneous and recyclable protocol immobilized palladium metal ion containing
ionic liquid (ImmPd-IL) was used as a common catalyst for alkoxycarbonylation
phenoxycarbonylation and aminocarbonylation reactions (Scheme 523) The
methodology offers synthesis of various carbonyl compounds including aliphatic
esters aromatic esters and amides from corresponding alcohol phenol and amines
The protocol is advantageous due to the ease in handling of the catalyst and simple
workup procedure and effective catalyst recyclability
Scheme 523 ImmPd-IL catalyzed different carbonylation reactions
521 Preparation of immobilized palladium metal ion containing ionic liquid
(ImmPd-IL) catalyst
Preparation of immobilized palladium metal ion-containing ionic liquid catalyst
(ImmPd-IL) is a two step process (Scheme 524) The first step involves the anchoring
of ionic liquid on to a silica support which gives immobilized ionic liquid (Imm-IL)
In a second step the synthesized Imm-IL is loaded with palladium metal ion (PdCl2)
which results immobilized palladium ion-containing ionic liquid (ImmPd-IL)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
228
Scheme 524 Preparation of immobilized ImmPd-IL
522 ALKOXYCARBONYLATION REACTIONS
Initially alkoxycarbonylation reaction of aryl iodide with aliphatic alcohols was
studied (Scheme 525)
Scheme 525 ImmPd-IL catalyzed alkoxycarbonylation of aryl iodides with alcohols
The effect of various reaction parameters like base temperature time and CO
pressure using ImmPd-IL as a catalyst was studied (Table 51) The reaction of
iodobenzene with methyl alcohol in presence of CO was chosen as model reaction for
the optimization To study the role of base the reaction was carried out using various
inorganic bases like K2CO3 (80) Cs2CO3 (79) and organic bases like DBU (85)
Et3N (96) (Table 51 entries 1-4) As Et3N provided maximum yield of the methyl
benzoate it was used for further study No profound increase in the yield of methyl
benzoate was observed when the reaction temperature was increased from 80 to 100
degC therefore 80 degC was considered as an optimum reaction temperature for further
studies (Table 51 entries 4-5) When CO pressure was increased from 73 psi to 145
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
229
psi equivalent yield of the desired product was observed (Table 51 entry 6) Hence
the finalized reaction conditions were base Et3N temperature 80 degC solvent
alcohol (also as a nucleophile) time 3 h and 73 psi of CO pressure
Table 51 Effect of bases temperature and time on ImmPd-IL catalyzed
alkoxycarbonylation reactiona
Entry Base Temp
(degC)
CO Press
(psi)
Yield
()b
1 K2CO3 80 73 80
2 Cs2CO3 80 73 79
3 DBU 80 73 85
4 Et3N 80 73 96
5 Et3N 100 73 97
6 Et3N 100 145 98
a Reaction conditions
Iodobenzene (2 mmol) methyl alcohol (5 mL) ImmPd-IL (2
mol ) Et3N (3 mmol) 73 psi CO press Temp (80 degC) Time (3 h) b Yield based on GC analysis
These optimized reaction parameters were then successfully applied to variety
of aryl iodides with different alcohols (Table 52) Model reaction of iodobenzene
with methyl alcohol provided 94 isolated yield of methyl benzoate (Table 52 entry
1) Ethyl alcohol and benzyl alcohol also reacts efficiently with iodobenzene
providing 95 and 89 yield of ethyl benzoate and benzyl benzoate respectively
(Table 52 entries 1-3) The substituted iodobenzene derivatives 4-iodoaniline and 4-
iodophenol furnished 80 and 75 yield of the methyl 4-aminobenzoate and methyl
4-hydroxybenzoate respectively (Table 52 entries 4-5) 4-Acetyliodobenzene reacts
with ethanol and provided 81 yield of ethyl-4-acetylbenzoate (Table 52 entry 6)
Iodonaphthalene furnished 79 yield of methyl 2-naphthoate (Table 52 entry 7)
whereas 1-iodo-4-nitrobenzene efficiently reacts with methyl alcohol furnishing a
moderate yield (70) of methyl 4-nitrobenzoate (Table 52 entry 8)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
230
Table 52 ImmPd-IL catalyzed alkoxycarbonylation of aryl iodides with various
alcoholsa
Entry Aryl iodide Alcohol Product Yield
()b
1
MeOH
94
2
EtOH
95
3
89
4
MeOH
80
5
MeOH
75
6
EtOH
81
7
MeOH
79
8
MeOH
70
a Reaction conditions aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
Et3N (3 mmol) 73 psi CO press Temp (80 degC) Time (3 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
231
It is believed that the supported palladium metal leaches out from the solid
support and goes into the solution at higher temperature and the reaction was
catalyzed mainly by dissolved palladium species (Tambade et al 2008) Hence to
determine whether the reaction was catalyzed due to the ImmPd-IL complex or a
leached palladium metal that comes off the support at higher temperature during the
reaction a hot filtration test was performed (Lempers 1998 Zhao 2009)
Hot filtration experiment was performed for the alkoxycarbonylation of
iodobenzene with benzyl alcohol using ImmPd-IL catalyst Reaction was carried out
at 80 oC during reaction the ImmPd-IL complex catalyst was filtered off and the
filtrate without addition of catalyst was allowed to react further It was found that no
further reaction occurred after this hot filtration procedure hence this experimental
finding suggests there is no palladium leaching from the ImmPd-IL complex during
the progress of a reaction In addition to reconfirm this observation ICP-AES
analysis of the reaction mixture was carried out after 15 and 3 h which revealed a
below detectable level (below 001 ppm) of palladium in solution
It is also important to study the separation and recyclability of the catalyst
The ImmPd-IL catalyst was separated from the reaction mixture by a simple filtration
procedure and was found to be effective up to four consecutive recycles for
methoxycarbonylation reaction (Figure 52) No significant decrease in yield during
recycle study was observed
Figure 52 Recycle study of ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
232
523 PHENOXYCARBONYLATION REACTIONS
ImmPd-IL catalytic system was further explored for the phenoxycarbonylation of aryl
iodides with various phenols to yield corresponding phenyl esters and it was observed
that corresponding products were obtained in good to excellent yields (Scheme 526)
Scheme 526 Phenoxycarbonylation of aryl iodides with phenols using ImmPd-IL
For the optimization of reaction the influence of critical parameters such as
solvent base and CO pressure on the carbonylation of iodobenzene with phenol as a
nucleophile have been investigated (Table 53 entries 1-8)
Table 53 Effect of solvents and bases on ImmPd-IL catalyzed Phenoxycarbonylation
reactiona
Entry Solvent Base CO Press
(psi)
Yield
()b
1 DMF Et3N 145 56
2 14-Dioxane Et3N 145 62
3
Water Et3N 145 0
4 Toluene Et3N 145 90
5 Toluene DBU 145 80
6 Toluene K2CO3 145 66
7 Toluene Cs2CO3 145 72
8 Toluene Et3N 73 85
a Reaction conditions Iodobenzene (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
base (3 mmol) solvent (10 mL) 8 h at 100 degC b Yield based on GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
233
The role of various solvents such as NN-dimethyl formamide (DMF) (56)
14-dioxane (62) water (0) and toluene (90) was studied (Table 53 entries 1-
4) It was observed that the reaction was more favourable using toluene as a solvent
and provided 90 yield of phenyl benzoate (Table 54 entry 4) Various screened
organic and inorganic bases (K2CO3 Cs2CO3 DBU and Et3N) showed Et3N (90) to
be superior base at 100 degC (Table 53 entries 4-7) The initial reaction was carried out
at 145 psi CO pressure which provided 90 yield of phenyl benzoate a further
decrease in CO pressure up to 73 psi decreased the yield of the phenyl benzoate
(Table 53 entry 8) Hence the finalized reaction parameters were Et3N as a base in
toluene CO 73 psi at 100 degC for 8 h
These finalized reaction parameters were then applied for the
phenoxycarbonylation of different aryl halides and phenols having different electron-
donating or withdrawing groups (Table 54 entries 1-7) Iodobenzene reacts
efficiently with phenol within 8 h providing 89 isolated yield of phenyl benzoate
(Table 54 entry 1) Substituted phenols such as p-cresol p-methoxyphenol and p-
chlorophenol reacts with iodobenzene furnishing good to excellent yields of the
corresponding product (Table 54 entries 2-4) The substituted iodobenzene
derivative reacts with phenol and provided 86 yields of phenyl 4-methoxybenzoate
(Table 54 entry 5) 1-Iodo-4-nitrobenzene furnished moderate yield (59) of the
phenyl 4-nitrobenzoate (Table 54 entry 6) Reaction of 1-iodonaphthalene with
phenol provided 75 yield of phenyl 1-naphthoate (Table 54 entry 7)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
234
Table 54 ImmPd-IL catalyzed Phenoxycarbonylation of aryl iodides with various
phenolsa
Entry Aryl iodide Phenol Product Yield
()b
1
89
2
90
3
88
4
84
5
86
6
59
7
75
a Reaction conditions aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
235
524 AMINOCARBONYLATION REACTIONS
The scope of ImmPd-IL was further extended for aminocarbonylation of aryl iodides
with a range of aliphatic aromatic primary and secondary amines (Scheme 527)
Scheme 527 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with amines
The reaction of iodobenzene with aniline was selected as a model reaction for
optimization Various solvents such as DMF (80) water (70) anisole (60) and
toluene (92) were screened for the reaction (ionic liquid was insoluble in water as it
was immobilised on solid support) but toluene was found to be the best solvent
(Table 55 entries 1-4) Screening of a variety of bases showed Et3N (90) to be
superior at 100 degC (Table 55 entries 4-6) Further reaction was optimized with
respect to various reaction parameters including temperature time and CO pressure
and the best optimized reaction conditions were then applied for the
aminocarbonylation of a variety of iodoaryls and amines
Table 55 Effect of solvents and bases on ImmPd-IL catalyzed aminocarbonylation
reactiona
Entry Solvent Base Yield
()b
1 DMF Et3N 80
2 Water Et3N 70
3
Anisole Et3N 60
4 Toluene Et3N 92
5 Toluene Na2CO3 52
6 Toluene K2CO3 57
a Reaction conditions
Iodobenzene (1 mmol) aniline (2 mmol) ImmPd-IL (2 mol)
Et3N (3 mmol) Toluene (10 mL) 8 h at 100 degC 145 psi CO pressure b Yield based GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
236
The optimized reaction parameters were then applied for the
aminocarbonylation of substituted aryl halides and aromatic amines The model
reaction of iodobenzene with aniline provided 90 isolated yield of N-
phenylbenzamide under optimized reaction conditions (Table 56 entry 1) 4-
iodoanisole furnished 85 yield of 4-methoxy-N-phenylbenzamide (Table 56 entries
2) 4-methoxyaniline reacts with iodobenzene and provided 88 yield of N-(4-
methoxyphenyl)benzamide (Table 56 entry 3) 3-(Trifluoromethyl)aniline provided a
moderate yield of the expected product (Table 56 entry 4)
There after various primary aliphatic amines were screened for the
aminocarbonylation Cyclohexyl amine efficiently reacts with iodobenzene and 2-
iodonaphthalene and provided 92 and 80 yield of N-cyclohexylbenzamide and N-
cyclohexyl-1-naphthamide respectively (Table 56 entries 5-6) Reaction of
iodobenzene and 4-iodo acetophenone with tert-butyl amine furnished 92 and 89
yield of respective amide (Table 56 entry 7-8) Benzyl amine provided excellent
yields of N-benzylbenzamide (Table 56 entry 9) To our delight aromatic secondary
amine such as N-methyl aniline efficiently reacts with iodobenzene furnishing 91
yield of N-methyl-N-phenylbenzamide (Table 56 entry 10)
Table 56 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with various
aliphatic and aromatic primary amines and secondary aminesa
Entry Aryl iodide Amine Product Yield
()b
1
90
2
85
3
88
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
237
4
75
5
92
6
80
7
92
8
89
9
90
10
91
a Reaction conditions aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
238
53 CONCLUSION
The present study reports an efficient and common protocol for
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
by using a well-defined heterogeneous ImmPd-IL complex as a versatile
catalyst
The ease of preparation of the complex indefinite shelf life stability towards
air makes it an ideal complex for the above transformations
The reaction system was optimized with respect to various reaction parameters
and applied for carbonylation of a range of aryl iodides with different types of
alcohols phenols and amines furnishing good to excellent yields of the
corresponding products
The present protocol provided high yields of the desired products for all
carbonylation protocols
All the reactions were carried out under milder operating conditions
Catalytic system showed excellent activity and selectivity and effectively
recycled for four consecutive cycles
The leaching of the Pd metal was examined by hot filteration test and ICP-
AES analysis which revels no significant leaching of the palladium occurs
during the reaction
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
239
54 EXPERIMENTAL
541 Materials and Method N-methylimidazole (99+) and 3-trimethoxysilylpropyl
chloride (97+) were purchased from Aldrich PdCl2 was purchased from WAKO
Anhydrous redistilled 1-methylimidazole (99+) was purchased from Aldrich All
the dehydrated solvents were obtained from WAKO Aerosil 300 (300 m2g) was
obtained from Japan Aerosil Co and calcined at 573 K for 15 h in air and 30 min in
vacuum before use as a support The procedures for catalyst preparation were based
previous publication (Sasaki et al 2008) with some modifications Prepared catalyst
was characterized by using IR and elemental analysis and loading of the catalyst was
calculated by XRF measurements (SEA-2010 Seiko Electronic Industrial Co) The
XPS of ImmPd-IL was measured using a PHI5000 Versa Probe with monochromatic
focused (100 times 100 μm) Al Kα X-ray radiation (15 kV 30 mA) and dual beam
neutralization using a combination of argon ion gun and electron irradiation
The products are well-known in the literature and were compared with
authentic samples Progress of the reaction was monitored by gas chromatography
(GC) Gas chromatography analysis was carried out on Perkin-Elmer Clarus 400 GC
equipped flame ionization detector with a capillary column (Elite-1 30 m times 032 mm
times 025 μm) using the external standard method A GCMS-QP 2010 instrument (Rtx-
17 30 m times 25 mm id film thickness 025 μm df) (column flow 2 mL minminus1
80-240
degC at 10 degCmin rise) The 1H NMR spectra were recorded on Varian-300 MHz FT-
NMR spectrometer in CDCl3 using TMS as the internal standard The 13
C NMR
spectra were recorded with a JEOL FT-NMR model-AL300 (75 MHz) spectrometer
in CDCl3 Chemical shifts are reported in parts per million (δ) relative to
tetramethylsilane as the internal standard J (coupling constant) values were reported
in hertz (Hz) Proton splitting patterns are described as s (singlet) d (doublet) t
(triplet) and m (multiplet)
542 Preparation of immobilized palladium metal ion-containing ionic liquid
1-methyl-3-(3-trimethoxysilylpropyl) imidazolium chloride was synthesized by
mixing N-methylimidazole (0690 mol) and 3-trimethoxysilylpropyl chloride (0690
mol) in a dry 300 mL flask under a nitrogen atmosphere and refluxed for 48 h After
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
240
cooling to room temperature the resultant liquid was washed by dehydrated ethyl
acetate five times and dried at room temperature under reduced pressure for 48 h
The obtained compound was stored at 253 K under dry nitrogen Silica (Aerosil 300
surface area 300 m2g calcined at 573 K for 15 h in air) and 1-methyl-3-(3-
trimethoxysilylpropyl) imidazolium chloride (weight ratio 11) was dispersed in
dehydrated toluene and the mixture was refluxed for 48 h under nitrogen
After the reflux toluene was removed by filtration using glass filter and the
excess ionic liquid was removed by washing with dichloromethane several times The
resultant solid is denoted as Imm-IL In the next step Imm-IL was added to an
acetonitrile solution of PdCl2 and refluxed for 24 h Acetonitrile and excess of metal
chloride were removed by washing acetone using glass filter several times The metal
loading of ImmPd-IL was 34 wt as determined by XRF measurements (SEA-2010
Seiko Electronic Industrial Co)
543 General Experimental Procedure for Alkoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
and Et3N (3 mmol) were added The autoclave was closed purged three times with
carbon monoxide pressurized with 73 psi of CO and heated at 80 degC for 3 h After
completion of the reaction the reactor was cooled to room temperature and the
remaining CO gas was carefully vented and the reactor was opened The reactor
vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to remove any traces of
product and catalyst if present The catalyst was filtered and the reaction mixture was
evaporated under vacuum The residue obtained was purified by column
chromatography (silica gel 60-120 mesh petroleum etherethyl acetate 9505) to
afford the desired product
544 General Experimental Procedure for Recycling of ImmPd-IL
After completion of reaction the reaction mixture was cooled to room temperature
and the catalyst was collected by filtration The filtered catalyst was washed with
distilled water (3 times 5 mL) and methanol (3 times 5 mL) to remove all traces of product or
reactant present The filtered catalyst was then dried under reduced pressure The
dried catalyst was then used for the alkoxycarbonylation reaction of iodobenzene with
methanol for the recyclability experiment
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
241
545 XPS spectra of ImmPd-IL catalyst
The XPS spectra of ImmPd-IL shows that two peaks at 337 and 3424 eV for fresh
Imm-Pd are assigned as 3d52 and 3d32 for Pd2+
species respectively (Figure 53)
For the first recycle sample new peaks appear at 3342 and 3392 eV which are
assigned as 3d52 and 3d32 for Pd(0) species respectively indicating that the
reduction of the Pd species takes place during the catalytic reaction From the
spectrum of the fourth recycle sample it is obvious that the component of Pd2+
is
decreasing upon recycles although the component of Pd(0) remains constant
Figure 53 XPS of Pd 3d and Cl 2p for ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
242
546 General Experimental Procedure for Phenoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h After the completion of the reaction the reactor was cooled to room
temperature and the remaining CO gas was carefully vented and the reactor was
opened The reactor vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to
remove any traces of product and catalyst if present The catalyst was filtered and the
reaction mixture was evaporated under vacuum The residue obtained was purified by
column chromatography (silica gel 60-120 mesh petroleum etherethyl acetate
9505) to afford the desired product
547 General Experimental Procedure for Aminocarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol)
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h (the ensuing procedure is the same as that discussed above for the phenoxy
carbonylation reaction)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
243
55 SPECTRAL DATA
Methyl benzoate
GC-MS (EI 70 eV) mz () = 136 [M+] (35) 105 (100) 77 (55) 51 (20)
Ethyl benzoate
GC-MS (EI 70 eV) mz () = 150 [M+] (21) 122 (30) 105 (100) 77 (55)
Benzyl benzoate
1H NMR (300 MHz CDCl3) δ 804-808 (m 2H ArH) 731-752 (m 8H
ArH) 53 (s 2H CH2) 13
C NMR (75 MHz CDCl3) δ 16648 13619 13312
13025 12981 12870 12848 12834 12827 6677
Methyl 4-aminobenzoate
1H NMR (300 MHz CDCl3) δ 783 (d 2H J = 87 Hz ArH) 661 (d 2H J =
87 Hz ArH) 414 (br s 2H NH2) 383 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16724 15107 13151 11927 11368 5155
Methyl 4-hydroxybenzoate
1H NMR (300 MHz CDCl3) δ 794 (d 2H J = 87 Hz ArH) 722 (br s 1H
OH) 690 (d 2H J = 87 Hz ArH) 390 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16778 16055 13203 12201 11539 5223
Methyl 2-naphthoate
1H NMR (300 MHz CDCl3) δ 850 (s 1H ArH) 798-805 (m 2H ArH)
773 (t 2H J = 84 Hz ArH) 754-761 (m 2H ArH) 396 (s 3H OCH3) 13
C NMR
(75 MHz CDCl3) δ 16685 13634 13087 13082 13013 12938 12901 12778
12720 12632 12260 5235
Ethyl 4-acetylbenzoate
1H NMR (300 MHz CDCl3) δ 814-811 (m 2H ArH) 802-799 (m 2H
ArH) 441 (q 2H J = 69Hz CH2CH3) 265 (s 3H COCH3) 142 (t 3H J = 69Hz
CH2CH3) 13
C NMR (75 MHz CDCl3) δ 19766 16576 14012 13424 12977
12817 6147 2689 1427
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
244
Phenyl benzoate
1H NMR (300 MHz CDCl3) δ 825-822 (m 2H ArH) 768-863 (m 1H
ArH) 756-742 (m 4H ArH) 732-723 (m 3H ArH) 13
C NMR (75 MHz CDCl3)
δ 16590 15103 13365 13023 12964 12956 12864 12596 1217 GC-MS (EI
70 eV) mz () = 198 [M+] (9) 105 (100) 77 (40) 51 (9)
phenyl 4-nitrobenzoate
1H NMR (300 MHz CDCl3) δ = 837 (s 4H ArH) 723-748 (m 5H ArH)
13C NMR (75 MHz CDCl3) δ = 16347 15110 15072 13517 13144 12984
12657 12388 12157 GC-MS (EI 70 eV) mz () = 243 [M+] (15) 150 (100) 77
(10)
phenyl 4-methoxybenzoate
1H NMR (300 MHz CDCl3) δ = 814-816 (d 2H J = 87Hz ArH) 720-741
(m 5H ArH) 696-698 (d 2H J = 87 Hz ArH) 386 (s 3H OCH3) GC-MS (EI
70 eV) mz () = 228 [M+] (5) 135 (100) 107 (9) 77 (20)
phenyl-1-naphthoate
1H NMR (300 MHz CDCl3) δ = 904 (d 1H ArH) 845 (d1H ArH) 804
(d 1H ArH) 788 (d 1H ArH) 742-763 (m 5H ArH) 726-728 (m 3H ArH)
13C NMR (70 MHz CDCl3) δ = 16594 15118 13440 13408 13182 13134
12968 12883 12850 12829 12650 12605 12590 12465 12203
N-phenylbenzamide
1H NMR (300 MHz CDCl3) δ 798 (br s 1H NH) 787-883 (m 2H ArH)
763 (d 2H J = 76 Hz ArH) 732-753 (m 5H ArH) 716 (t 1H J = 73 ArH) 13
C
NMR (75 MHz CDCl3) δ 16590 13798 13502 13186 12911 12880 12709
12461 12032 ppm GC-MS mz () = 197 [M+] (42) 105 (100) 77 (54)
4-acetyl-N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 806 (d 2H J = 84Hz ArH) 777 (d 2H J
= 84Hz ArH) 601 (br s 1H NH) 393 (s 3H CH3) 148 (s 9H) 13
C NMR (75
MHz CDCl3) δ 16640 16605 13987 13234 12979 12682 5239 5195 2883
ppm GC-MS (EI 70 eV) mz () = 219 [M+] (20) 186 (22) 148 (100) 130 (30) 76
(20)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
223
A method for the aminocarbonylation of aryl bromide using xantphos as a
ligand has been reported recently by Buchwald and group (2008) (Scheme 515) The
method was effective for the direct synthesis of Weinreb amides 1ry
and 2ry
benzamides and methyl esters from the corresponding aryl bromides at atmospheric
pressure of CO The catalytic system was applied for variety of substrates providing
good to excellent yield of desired carbonylated products In addition a putative
catalytic intermediate (Xantphos)Pd(Br)benzoyl was synthesized and an X-ray crystal
structure was also provided This crystal structure revealed that this species possess a
cis-coordinated palladium centre
Scheme 515 Pd(OAc)2 Xantphos catalyzed aminocarbonylation reaction
Kumar et al (2004) demonstrated the aminocarbonylation of unprotected
indoles with different N- and O-nucleophiles using Pddppf as a catalyst (Scheme
516) Various indole carboxylic acid derivatives were accessible in excellent yield
For example aminocarbonylation of 4- 5- 6- or 7-bromoindole with arylethyl
piperazines provided a direct one-step synthesis for CNS active amphetamine
derivatives
Scheme 516 Pd dppf catalyzed aminocarbonylation of bromoindoles
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
224
Pd-catalyzed aminocarbonylation of heteroaryl halides using monodentate
ligand di-tert-butylphosphinoferrocene tetrafluoroborate has been developed by
Senanayake and co-workers (2009) (Scheme 517) The developed protocol was
successfully applied for the preparation of a series of heteroaromatic amide
derivatives in good yields
Scheme 517 Pd P(Fc)(t-Bu)2HBF4 catalyzed aminocarbonylation
Kollar and group reported (2007) Pd(OAc)2PPh3 catalyzed protocol for the
aminocarbonylation of heteroaryl iodides (Scheme 518) Various primary and
secondary amines including amino acid methyl esters were used as nucleophiles in
palladium-catalyzed aminocarbonylation of 2-iodopyridine 3-iodopyridine and
iodopyrazine The reaction works well with variety of nucleophiles having electron-
rich and electron-poor substituents
Scheme 518 Pd(OAc)2PPh3 catalyzed aminocarbonylation of heteroaryl iodides
Well-dispersed palladium(0) nanoparticles stabilized with phosphonium based
ionic liquid were synthesized and explored for the aminocarbonylation reaction of aryl
iodide in ionic liquid media by Zhu et al (2011) (Scheme 519) Different derivatives
of amides were synthesized from corresponding aryl halide and aryl amines
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
225
Scheme 519 Pd(0) nanoparticles catalyzed aminocarbonylation of heteroaryl iodides
An efficient methodology for the synthesis of amides via palladium-catalyzed
aminocarbonylation of aryl iodides was reported by Castill et al (2012) using the
bulky cis-12-bis[(di-tert-butylphosphino)methyl]cyclohexane ligand under
atmospheric pressure of carbon monoxide (Scheme 520) A broad range of iodoaryl
derivatives with different amine were screened
Scheme 520 PdP(Fc)(t-Bu)2 catalyzed aminocarbonylation
Recently Dang et al (2012) reported an aminocarbonylation of aryl iodides
using palladium nanoparticles supported on MOF-5 (metal-organic frameworks)
(Scheme 521) Various palladium supported catalysts using different solid supports
like Silica Al2O3 and MOF has been synthesized but palladium catalyst supported on
MOF-5 provided better results The developed catalytic system worked under
atmospheric pressure of carbon monoxide and was applied for the synthesis of various
substituted amides furthermore the catalyst was also recycled
Scheme 521 Pd nanoparticles supported on MOF-5 catalyzed aminocarbonylation
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
226
Begouin et al (2009) have demonstrated that [Mo(CO)6] can be successfully
used as a CO source in aminocarbonylation reactions (Scheme 522) Range of aryl
and heteroaryl substrates either halides or amines were tested for the
aminocarbonylation reactions
Scheme 522 CO free aminocarbonylation using Mo(CO)6
Literature reports reveals that alkoxyphenoxycarbonylation and
aminocarbonylation were well explored by using a variety of homogeneous Pd
complexes with different air and moisture sensitive NP containing ligands which had
problems in the recovery and recycling of the expensive palladium catalyst Also there
is no general protocol developed which could efficiently catalyze the carbonylation of
aryl iodide with different nucleophiles such as phenols alcohols and amines Thus
there is a need to develop a chemically well defined air stable single-component Pd-
complex which can efficiently catalyze different carbonylation reactions including
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
Considering this immobilization strategies for metal complex wherein the
metal is coordinated to a ligand grafted on to an inorganic or organic support has been
developed (Lu and Toy 2009 Byun and Lee 2004) Ionic liquids containing metal
ions are considered as catalytic precursors and they can be immobilized on solid
support thus facilitates the reuse of catalyst finding a promising use in organic
transformations (Doorslaer et al 2010 Sasaki et al 2005 Sasaki et al 2008 Zhong
et al 2006) In this regards immobilized palladium metal ion containing ionic liquid
[ImmPd-IL] is explored for alkoxycarbonylation phenoxycarbonylation and
aminocarbonylation reactions
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
227
52 RESULTS AND DISCUSSION
Considering the objective of the development of efficient phosphine free
heterogeneous and recyclable protocol immobilized palladium metal ion containing
ionic liquid (ImmPd-IL) was used as a common catalyst for alkoxycarbonylation
phenoxycarbonylation and aminocarbonylation reactions (Scheme 523) The
methodology offers synthesis of various carbonyl compounds including aliphatic
esters aromatic esters and amides from corresponding alcohol phenol and amines
The protocol is advantageous due to the ease in handling of the catalyst and simple
workup procedure and effective catalyst recyclability
Scheme 523 ImmPd-IL catalyzed different carbonylation reactions
521 Preparation of immobilized palladium metal ion containing ionic liquid
(ImmPd-IL) catalyst
Preparation of immobilized palladium metal ion-containing ionic liquid catalyst
(ImmPd-IL) is a two step process (Scheme 524) The first step involves the anchoring
of ionic liquid on to a silica support which gives immobilized ionic liquid (Imm-IL)
In a second step the synthesized Imm-IL is loaded with palladium metal ion (PdCl2)
which results immobilized palladium ion-containing ionic liquid (ImmPd-IL)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
228
Scheme 524 Preparation of immobilized ImmPd-IL
522 ALKOXYCARBONYLATION REACTIONS
Initially alkoxycarbonylation reaction of aryl iodide with aliphatic alcohols was
studied (Scheme 525)
Scheme 525 ImmPd-IL catalyzed alkoxycarbonylation of aryl iodides with alcohols
The effect of various reaction parameters like base temperature time and CO
pressure using ImmPd-IL as a catalyst was studied (Table 51) The reaction of
iodobenzene with methyl alcohol in presence of CO was chosen as model reaction for
the optimization To study the role of base the reaction was carried out using various
inorganic bases like K2CO3 (80) Cs2CO3 (79) and organic bases like DBU (85)
Et3N (96) (Table 51 entries 1-4) As Et3N provided maximum yield of the methyl
benzoate it was used for further study No profound increase in the yield of methyl
benzoate was observed when the reaction temperature was increased from 80 to 100
degC therefore 80 degC was considered as an optimum reaction temperature for further
studies (Table 51 entries 4-5) When CO pressure was increased from 73 psi to 145
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
229
psi equivalent yield of the desired product was observed (Table 51 entry 6) Hence
the finalized reaction conditions were base Et3N temperature 80 degC solvent
alcohol (also as a nucleophile) time 3 h and 73 psi of CO pressure
Table 51 Effect of bases temperature and time on ImmPd-IL catalyzed
alkoxycarbonylation reactiona
Entry Base Temp
(degC)
CO Press
(psi)
Yield
()b
1 K2CO3 80 73 80
2 Cs2CO3 80 73 79
3 DBU 80 73 85
4 Et3N 80 73 96
5 Et3N 100 73 97
6 Et3N 100 145 98
a Reaction conditions
Iodobenzene (2 mmol) methyl alcohol (5 mL) ImmPd-IL (2
mol ) Et3N (3 mmol) 73 psi CO press Temp (80 degC) Time (3 h) b Yield based on GC analysis
These optimized reaction parameters were then successfully applied to variety
of aryl iodides with different alcohols (Table 52) Model reaction of iodobenzene
with methyl alcohol provided 94 isolated yield of methyl benzoate (Table 52 entry
1) Ethyl alcohol and benzyl alcohol also reacts efficiently with iodobenzene
providing 95 and 89 yield of ethyl benzoate and benzyl benzoate respectively
(Table 52 entries 1-3) The substituted iodobenzene derivatives 4-iodoaniline and 4-
iodophenol furnished 80 and 75 yield of the methyl 4-aminobenzoate and methyl
4-hydroxybenzoate respectively (Table 52 entries 4-5) 4-Acetyliodobenzene reacts
with ethanol and provided 81 yield of ethyl-4-acetylbenzoate (Table 52 entry 6)
Iodonaphthalene furnished 79 yield of methyl 2-naphthoate (Table 52 entry 7)
whereas 1-iodo-4-nitrobenzene efficiently reacts with methyl alcohol furnishing a
moderate yield (70) of methyl 4-nitrobenzoate (Table 52 entry 8)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
230
Table 52 ImmPd-IL catalyzed alkoxycarbonylation of aryl iodides with various
alcoholsa
Entry Aryl iodide Alcohol Product Yield
()b
1
MeOH
94
2
EtOH
95
3
89
4
MeOH
80
5
MeOH
75
6
EtOH
81
7
MeOH
79
8
MeOH
70
a Reaction conditions aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
Et3N (3 mmol) 73 psi CO press Temp (80 degC) Time (3 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
231
It is believed that the supported palladium metal leaches out from the solid
support and goes into the solution at higher temperature and the reaction was
catalyzed mainly by dissolved palladium species (Tambade et al 2008) Hence to
determine whether the reaction was catalyzed due to the ImmPd-IL complex or a
leached palladium metal that comes off the support at higher temperature during the
reaction a hot filtration test was performed (Lempers 1998 Zhao 2009)
Hot filtration experiment was performed for the alkoxycarbonylation of
iodobenzene with benzyl alcohol using ImmPd-IL catalyst Reaction was carried out
at 80 oC during reaction the ImmPd-IL complex catalyst was filtered off and the
filtrate without addition of catalyst was allowed to react further It was found that no
further reaction occurred after this hot filtration procedure hence this experimental
finding suggests there is no palladium leaching from the ImmPd-IL complex during
the progress of a reaction In addition to reconfirm this observation ICP-AES
analysis of the reaction mixture was carried out after 15 and 3 h which revealed a
below detectable level (below 001 ppm) of palladium in solution
It is also important to study the separation and recyclability of the catalyst
The ImmPd-IL catalyst was separated from the reaction mixture by a simple filtration
procedure and was found to be effective up to four consecutive recycles for
methoxycarbonylation reaction (Figure 52) No significant decrease in yield during
recycle study was observed
Figure 52 Recycle study of ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
232
523 PHENOXYCARBONYLATION REACTIONS
ImmPd-IL catalytic system was further explored for the phenoxycarbonylation of aryl
iodides with various phenols to yield corresponding phenyl esters and it was observed
that corresponding products were obtained in good to excellent yields (Scheme 526)
Scheme 526 Phenoxycarbonylation of aryl iodides with phenols using ImmPd-IL
For the optimization of reaction the influence of critical parameters such as
solvent base and CO pressure on the carbonylation of iodobenzene with phenol as a
nucleophile have been investigated (Table 53 entries 1-8)
Table 53 Effect of solvents and bases on ImmPd-IL catalyzed Phenoxycarbonylation
reactiona
Entry Solvent Base CO Press
(psi)
Yield
()b
1 DMF Et3N 145 56
2 14-Dioxane Et3N 145 62
3
Water Et3N 145 0
4 Toluene Et3N 145 90
5 Toluene DBU 145 80
6 Toluene K2CO3 145 66
7 Toluene Cs2CO3 145 72
8 Toluene Et3N 73 85
a Reaction conditions Iodobenzene (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
base (3 mmol) solvent (10 mL) 8 h at 100 degC b Yield based on GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
233
The role of various solvents such as NN-dimethyl formamide (DMF) (56)
14-dioxane (62) water (0) and toluene (90) was studied (Table 53 entries 1-
4) It was observed that the reaction was more favourable using toluene as a solvent
and provided 90 yield of phenyl benzoate (Table 54 entry 4) Various screened
organic and inorganic bases (K2CO3 Cs2CO3 DBU and Et3N) showed Et3N (90) to
be superior base at 100 degC (Table 53 entries 4-7) The initial reaction was carried out
at 145 psi CO pressure which provided 90 yield of phenyl benzoate a further
decrease in CO pressure up to 73 psi decreased the yield of the phenyl benzoate
(Table 53 entry 8) Hence the finalized reaction parameters were Et3N as a base in
toluene CO 73 psi at 100 degC for 8 h
These finalized reaction parameters were then applied for the
phenoxycarbonylation of different aryl halides and phenols having different electron-
donating or withdrawing groups (Table 54 entries 1-7) Iodobenzene reacts
efficiently with phenol within 8 h providing 89 isolated yield of phenyl benzoate
(Table 54 entry 1) Substituted phenols such as p-cresol p-methoxyphenol and p-
chlorophenol reacts with iodobenzene furnishing good to excellent yields of the
corresponding product (Table 54 entries 2-4) The substituted iodobenzene
derivative reacts with phenol and provided 86 yields of phenyl 4-methoxybenzoate
(Table 54 entry 5) 1-Iodo-4-nitrobenzene furnished moderate yield (59) of the
phenyl 4-nitrobenzoate (Table 54 entry 6) Reaction of 1-iodonaphthalene with
phenol provided 75 yield of phenyl 1-naphthoate (Table 54 entry 7)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
234
Table 54 ImmPd-IL catalyzed Phenoxycarbonylation of aryl iodides with various
phenolsa
Entry Aryl iodide Phenol Product Yield
()b
1
89
2
90
3
88
4
84
5
86
6
59
7
75
a Reaction conditions aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
235
524 AMINOCARBONYLATION REACTIONS
The scope of ImmPd-IL was further extended for aminocarbonylation of aryl iodides
with a range of aliphatic aromatic primary and secondary amines (Scheme 527)
Scheme 527 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with amines
The reaction of iodobenzene with aniline was selected as a model reaction for
optimization Various solvents such as DMF (80) water (70) anisole (60) and
toluene (92) were screened for the reaction (ionic liquid was insoluble in water as it
was immobilised on solid support) but toluene was found to be the best solvent
(Table 55 entries 1-4) Screening of a variety of bases showed Et3N (90) to be
superior at 100 degC (Table 55 entries 4-6) Further reaction was optimized with
respect to various reaction parameters including temperature time and CO pressure
and the best optimized reaction conditions were then applied for the
aminocarbonylation of a variety of iodoaryls and amines
Table 55 Effect of solvents and bases on ImmPd-IL catalyzed aminocarbonylation
reactiona
Entry Solvent Base Yield
()b
1 DMF Et3N 80
2 Water Et3N 70
3
Anisole Et3N 60
4 Toluene Et3N 92
5 Toluene Na2CO3 52
6 Toluene K2CO3 57
a Reaction conditions
Iodobenzene (1 mmol) aniline (2 mmol) ImmPd-IL (2 mol)
Et3N (3 mmol) Toluene (10 mL) 8 h at 100 degC 145 psi CO pressure b Yield based GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
236
The optimized reaction parameters were then applied for the
aminocarbonylation of substituted aryl halides and aromatic amines The model
reaction of iodobenzene with aniline provided 90 isolated yield of N-
phenylbenzamide under optimized reaction conditions (Table 56 entry 1) 4-
iodoanisole furnished 85 yield of 4-methoxy-N-phenylbenzamide (Table 56 entries
2) 4-methoxyaniline reacts with iodobenzene and provided 88 yield of N-(4-
methoxyphenyl)benzamide (Table 56 entry 3) 3-(Trifluoromethyl)aniline provided a
moderate yield of the expected product (Table 56 entry 4)
There after various primary aliphatic amines were screened for the
aminocarbonylation Cyclohexyl amine efficiently reacts with iodobenzene and 2-
iodonaphthalene and provided 92 and 80 yield of N-cyclohexylbenzamide and N-
cyclohexyl-1-naphthamide respectively (Table 56 entries 5-6) Reaction of
iodobenzene and 4-iodo acetophenone with tert-butyl amine furnished 92 and 89
yield of respective amide (Table 56 entry 7-8) Benzyl amine provided excellent
yields of N-benzylbenzamide (Table 56 entry 9) To our delight aromatic secondary
amine such as N-methyl aniline efficiently reacts with iodobenzene furnishing 91
yield of N-methyl-N-phenylbenzamide (Table 56 entry 10)
Table 56 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with various
aliphatic and aromatic primary amines and secondary aminesa
Entry Aryl iodide Amine Product Yield
()b
1
90
2
85
3
88
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
237
4
75
5
92
6
80
7
92
8
89
9
90
10
91
a Reaction conditions aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
238
53 CONCLUSION
The present study reports an efficient and common protocol for
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
by using a well-defined heterogeneous ImmPd-IL complex as a versatile
catalyst
The ease of preparation of the complex indefinite shelf life stability towards
air makes it an ideal complex for the above transformations
The reaction system was optimized with respect to various reaction parameters
and applied for carbonylation of a range of aryl iodides with different types of
alcohols phenols and amines furnishing good to excellent yields of the
corresponding products
The present protocol provided high yields of the desired products for all
carbonylation protocols
All the reactions were carried out under milder operating conditions
Catalytic system showed excellent activity and selectivity and effectively
recycled for four consecutive cycles
The leaching of the Pd metal was examined by hot filteration test and ICP-
AES analysis which revels no significant leaching of the palladium occurs
during the reaction
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
239
54 EXPERIMENTAL
541 Materials and Method N-methylimidazole (99+) and 3-trimethoxysilylpropyl
chloride (97+) were purchased from Aldrich PdCl2 was purchased from WAKO
Anhydrous redistilled 1-methylimidazole (99+) was purchased from Aldrich All
the dehydrated solvents were obtained from WAKO Aerosil 300 (300 m2g) was
obtained from Japan Aerosil Co and calcined at 573 K for 15 h in air and 30 min in
vacuum before use as a support The procedures for catalyst preparation were based
previous publication (Sasaki et al 2008) with some modifications Prepared catalyst
was characterized by using IR and elemental analysis and loading of the catalyst was
calculated by XRF measurements (SEA-2010 Seiko Electronic Industrial Co) The
XPS of ImmPd-IL was measured using a PHI5000 Versa Probe with monochromatic
focused (100 times 100 μm) Al Kα X-ray radiation (15 kV 30 mA) and dual beam
neutralization using a combination of argon ion gun and electron irradiation
The products are well-known in the literature and were compared with
authentic samples Progress of the reaction was monitored by gas chromatography
(GC) Gas chromatography analysis was carried out on Perkin-Elmer Clarus 400 GC
equipped flame ionization detector with a capillary column (Elite-1 30 m times 032 mm
times 025 μm) using the external standard method A GCMS-QP 2010 instrument (Rtx-
17 30 m times 25 mm id film thickness 025 μm df) (column flow 2 mL minminus1
80-240
degC at 10 degCmin rise) The 1H NMR spectra were recorded on Varian-300 MHz FT-
NMR spectrometer in CDCl3 using TMS as the internal standard The 13
C NMR
spectra were recorded with a JEOL FT-NMR model-AL300 (75 MHz) spectrometer
in CDCl3 Chemical shifts are reported in parts per million (δ) relative to
tetramethylsilane as the internal standard J (coupling constant) values were reported
in hertz (Hz) Proton splitting patterns are described as s (singlet) d (doublet) t
(triplet) and m (multiplet)
542 Preparation of immobilized palladium metal ion-containing ionic liquid
1-methyl-3-(3-trimethoxysilylpropyl) imidazolium chloride was synthesized by
mixing N-methylimidazole (0690 mol) and 3-trimethoxysilylpropyl chloride (0690
mol) in a dry 300 mL flask under a nitrogen atmosphere and refluxed for 48 h After
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
240
cooling to room temperature the resultant liquid was washed by dehydrated ethyl
acetate five times and dried at room temperature under reduced pressure for 48 h
The obtained compound was stored at 253 K under dry nitrogen Silica (Aerosil 300
surface area 300 m2g calcined at 573 K for 15 h in air) and 1-methyl-3-(3-
trimethoxysilylpropyl) imidazolium chloride (weight ratio 11) was dispersed in
dehydrated toluene and the mixture was refluxed for 48 h under nitrogen
After the reflux toluene was removed by filtration using glass filter and the
excess ionic liquid was removed by washing with dichloromethane several times The
resultant solid is denoted as Imm-IL In the next step Imm-IL was added to an
acetonitrile solution of PdCl2 and refluxed for 24 h Acetonitrile and excess of metal
chloride were removed by washing acetone using glass filter several times The metal
loading of ImmPd-IL was 34 wt as determined by XRF measurements (SEA-2010
Seiko Electronic Industrial Co)
543 General Experimental Procedure for Alkoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
and Et3N (3 mmol) were added The autoclave was closed purged three times with
carbon monoxide pressurized with 73 psi of CO and heated at 80 degC for 3 h After
completion of the reaction the reactor was cooled to room temperature and the
remaining CO gas was carefully vented and the reactor was opened The reactor
vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to remove any traces of
product and catalyst if present The catalyst was filtered and the reaction mixture was
evaporated under vacuum The residue obtained was purified by column
chromatography (silica gel 60-120 mesh petroleum etherethyl acetate 9505) to
afford the desired product
544 General Experimental Procedure for Recycling of ImmPd-IL
After completion of reaction the reaction mixture was cooled to room temperature
and the catalyst was collected by filtration The filtered catalyst was washed with
distilled water (3 times 5 mL) and methanol (3 times 5 mL) to remove all traces of product or
reactant present The filtered catalyst was then dried under reduced pressure The
dried catalyst was then used for the alkoxycarbonylation reaction of iodobenzene with
methanol for the recyclability experiment
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
241
545 XPS spectra of ImmPd-IL catalyst
The XPS spectra of ImmPd-IL shows that two peaks at 337 and 3424 eV for fresh
Imm-Pd are assigned as 3d52 and 3d32 for Pd2+
species respectively (Figure 53)
For the first recycle sample new peaks appear at 3342 and 3392 eV which are
assigned as 3d52 and 3d32 for Pd(0) species respectively indicating that the
reduction of the Pd species takes place during the catalytic reaction From the
spectrum of the fourth recycle sample it is obvious that the component of Pd2+
is
decreasing upon recycles although the component of Pd(0) remains constant
Figure 53 XPS of Pd 3d and Cl 2p for ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
242
546 General Experimental Procedure for Phenoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h After the completion of the reaction the reactor was cooled to room
temperature and the remaining CO gas was carefully vented and the reactor was
opened The reactor vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to
remove any traces of product and catalyst if present The catalyst was filtered and the
reaction mixture was evaporated under vacuum The residue obtained was purified by
column chromatography (silica gel 60-120 mesh petroleum etherethyl acetate
9505) to afford the desired product
547 General Experimental Procedure for Aminocarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol)
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h (the ensuing procedure is the same as that discussed above for the phenoxy
carbonylation reaction)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
243
55 SPECTRAL DATA
Methyl benzoate
GC-MS (EI 70 eV) mz () = 136 [M+] (35) 105 (100) 77 (55) 51 (20)
Ethyl benzoate
GC-MS (EI 70 eV) mz () = 150 [M+] (21) 122 (30) 105 (100) 77 (55)
Benzyl benzoate
1H NMR (300 MHz CDCl3) δ 804-808 (m 2H ArH) 731-752 (m 8H
ArH) 53 (s 2H CH2) 13
C NMR (75 MHz CDCl3) δ 16648 13619 13312
13025 12981 12870 12848 12834 12827 6677
Methyl 4-aminobenzoate
1H NMR (300 MHz CDCl3) δ 783 (d 2H J = 87 Hz ArH) 661 (d 2H J =
87 Hz ArH) 414 (br s 2H NH2) 383 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16724 15107 13151 11927 11368 5155
Methyl 4-hydroxybenzoate
1H NMR (300 MHz CDCl3) δ 794 (d 2H J = 87 Hz ArH) 722 (br s 1H
OH) 690 (d 2H J = 87 Hz ArH) 390 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16778 16055 13203 12201 11539 5223
Methyl 2-naphthoate
1H NMR (300 MHz CDCl3) δ 850 (s 1H ArH) 798-805 (m 2H ArH)
773 (t 2H J = 84 Hz ArH) 754-761 (m 2H ArH) 396 (s 3H OCH3) 13
C NMR
(75 MHz CDCl3) δ 16685 13634 13087 13082 13013 12938 12901 12778
12720 12632 12260 5235
Ethyl 4-acetylbenzoate
1H NMR (300 MHz CDCl3) δ 814-811 (m 2H ArH) 802-799 (m 2H
ArH) 441 (q 2H J = 69Hz CH2CH3) 265 (s 3H COCH3) 142 (t 3H J = 69Hz
CH2CH3) 13
C NMR (75 MHz CDCl3) δ 19766 16576 14012 13424 12977
12817 6147 2689 1427
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
244
Phenyl benzoate
1H NMR (300 MHz CDCl3) δ 825-822 (m 2H ArH) 768-863 (m 1H
ArH) 756-742 (m 4H ArH) 732-723 (m 3H ArH) 13
C NMR (75 MHz CDCl3)
δ 16590 15103 13365 13023 12964 12956 12864 12596 1217 GC-MS (EI
70 eV) mz () = 198 [M+] (9) 105 (100) 77 (40) 51 (9)
phenyl 4-nitrobenzoate
1H NMR (300 MHz CDCl3) δ = 837 (s 4H ArH) 723-748 (m 5H ArH)
13C NMR (75 MHz CDCl3) δ = 16347 15110 15072 13517 13144 12984
12657 12388 12157 GC-MS (EI 70 eV) mz () = 243 [M+] (15) 150 (100) 77
(10)
phenyl 4-methoxybenzoate
1H NMR (300 MHz CDCl3) δ = 814-816 (d 2H J = 87Hz ArH) 720-741
(m 5H ArH) 696-698 (d 2H J = 87 Hz ArH) 386 (s 3H OCH3) GC-MS (EI
70 eV) mz () = 228 [M+] (5) 135 (100) 107 (9) 77 (20)
phenyl-1-naphthoate
1H NMR (300 MHz CDCl3) δ = 904 (d 1H ArH) 845 (d1H ArH) 804
(d 1H ArH) 788 (d 1H ArH) 742-763 (m 5H ArH) 726-728 (m 3H ArH)
13C NMR (70 MHz CDCl3) δ = 16594 15118 13440 13408 13182 13134
12968 12883 12850 12829 12650 12605 12590 12465 12203
N-phenylbenzamide
1H NMR (300 MHz CDCl3) δ 798 (br s 1H NH) 787-883 (m 2H ArH)
763 (d 2H J = 76 Hz ArH) 732-753 (m 5H ArH) 716 (t 1H J = 73 ArH) 13
C
NMR (75 MHz CDCl3) δ 16590 13798 13502 13186 12911 12880 12709
12461 12032 ppm GC-MS mz () = 197 [M+] (42) 105 (100) 77 (54)
4-acetyl-N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 806 (d 2H J = 84Hz ArH) 777 (d 2H J
= 84Hz ArH) 601 (br s 1H NH) 393 (s 3H CH3) 148 (s 9H) 13
C NMR (75
MHz CDCl3) δ 16640 16605 13987 13234 12979 12682 5239 5195 2883
ppm GC-MS (EI 70 eV) mz () = 219 [M+] (20) 186 (22) 148 (100) 130 (30) 76
(20)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
224
Pd-catalyzed aminocarbonylation of heteroaryl halides using monodentate
ligand di-tert-butylphosphinoferrocene tetrafluoroborate has been developed by
Senanayake and co-workers (2009) (Scheme 517) The developed protocol was
successfully applied for the preparation of a series of heteroaromatic amide
derivatives in good yields
Scheme 517 Pd P(Fc)(t-Bu)2HBF4 catalyzed aminocarbonylation
Kollar and group reported (2007) Pd(OAc)2PPh3 catalyzed protocol for the
aminocarbonylation of heteroaryl iodides (Scheme 518) Various primary and
secondary amines including amino acid methyl esters were used as nucleophiles in
palladium-catalyzed aminocarbonylation of 2-iodopyridine 3-iodopyridine and
iodopyrazine The reaction works well with variety of nucleophiles having electron-
rich and electron-poor substituents
Scheme 518 Pd(OAc)2PPh3 catalyzed aminocarbonylation of heteroaryl iodides
Well-dispersed palladium(0) nanoparticles stabilized with phosphonium based
ionic liquid were synthesized and explored for the aminocarbonylation reaction of aryl
iodide in ionic liquid media by Zhu et al (2011) (Scheme 519) Different derivatives
of amides were synthesized from corresponding aryl halide and aryl amines
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
225
Scheme 519 Pd(0) nanoparticles catalyzed aminocarbonylation of heteroaryl iodides
An efficient methodology for the synthesis of amides via palladium-catalyzed
aminocarbonylation of aryl iodides was reported by Castill et al (2012) using the
bulky cis-12-bis[(di-tert-butylphosphino)methyl]cyclohexane ligand under
atmospheric pressure of carbon monoxide (Scheme 520) A broad range of iodoaryl
derivatives with different amine were screened
Scheme 520 PdP(Fc)(t-Bu)2 catalyzed aminocarbonylation
Recently Dang et al (2012) reported an aminocarbonylation of aryl iodides
using palladium nanoparticles supported on MOF-5 (metal-organic frameworks)
(Scheme 521) Various palladium supported catalysts using different solid supports
like Silica Al2O3 and MOF has been synthesized but palladium catalyst supported on
MOF-5 provided better results The developed catalytic system worked under
atmospheric pressure of carbon monoxide and was applied for the synthesis of various
substituted amides furthermore the catalyst was also recycled
Scheme 521 Pd nanoparticles supported on MOF-5 catalyzed aminocarbonylation
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
226
Begouin et al (2009) have demonstrated that [Mo(CO)6] can be successfully
used as a CO source in aminocarbonylation reactions (Scheme 522) Range of aryl
and heteroaryl substrates either halides or amines were tested for the
aminocarbonylation reactions
Scheme 522 CO free aminocarbonylation using Mo(CO)6
Literature reports reveals that alkoxyphenoxycarbonylation and
aminocarbonylation were well explored by using a variety of homogeneous Pd
complexes with different air and moisture sensitive NP containing ligands which had
problems in the recovery and recycling of the expensive palladium catalyst Also there
is no general protocol developed which could efficiently catalyze the carbonylation of
aryl iodide with different nucleophiles such as phenols alcohols and amines Thus
there is a need to develop a chemically well defined air stable single-component Pd-
complex which can efficiently catalyze different carbonylation reactions including
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
Considering this immobilization strategies for metal complex wherein the
metal is coordinated to a ligand grafted on to an inorganic or organic support has been
developed (Lu and Toy 2009 Byun and Lee 2004) Ionic liquids containing metal
ions are considered as catalytic precursors and they can be immobilized on solid
support thus facilitates the reuse of catalyst finding a promising use in organic
transformations (Doorslaer et al 2010 Sasaki et al 2005 Sasaki et al 2008 Zhong
et al 2006) In this regards immobilized palladium metal ion containing ionic liquid
[ImmPd-IL] is explored for alkoxycarbonylation phenoxycarbonylation and
aminocarbonylation reactions
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
227
52 RESULTS AND DISCUSSION
Considering the objective of the development of efficient phosphine free
heterogeneous and recyclable protocol immobilized palladium metal ion containing
ionic liquid (ImmPd-IL) was used as a common catalyst for alkoxycarbonylation
phenoxycarbonylation and aminocarbonylation reactions (Scheme 523) The
methodology offers synthesis of various carbonyl compounds including aliphatic
esters aromatic esters and amides from corresponding alcohol phenol and amines
The protocol is advantageous due to the ease in handling of the catalyst and simple
workup procedure and effective catalyst recyclability
Scheme 523 ImmPd-IL catalyzed different carbonylation reactions
521 Preparation of immobilized palladium metal ion containing ionic liquid
(ImmPd-IL) catalyst
Preparation of immobilized palladium metal ion-containing ionic liquid catalyst
(ImmPd-IL) is a two step process (Scheme 524) The first step involves the anchoring
of ionic liquid on to a silica support which gives immobilized ionic liquid (Imm-IL)
In a second step the synthesized Imm-IL is loaded with palladium metal ion (PdCl2)
which results immobilized palladium ion-containing ionic liquid (ImmPd-IL)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
228
Scheme 524 Preparation of immobilized ImmPd-IL
522 ALKOXYCARBONYLATION REACTIONS
Initially alkoxycarbonylation reaction of aryl iodide with aliphatic alcohols was
studied (Scheme 525)
Scheme 525 ImmPd-IL catalyzed alkoxycarbonylation of aryl iodides with alcohols
The effect of various reaction parameters like base temperature time and CO
pressure using ImmPd-IL as a catalyst was studied (Table 51) The reaction of
iodobenzene with methyl alcohol in presence of CO was chosen as model reaction for
the optimization To study the role of base the reaction was carried out using various
inorganic bases like K2CO3 (80) Cs2CO3 (79) and organic bases like DBU (85)
Et3N (96) (Table 51 entries 1-4) As Et3N provided maximum yield of the methyl
benzoate it was used for further study No profound increase in the yield of methyl
benzoate was observed when the reaction temperature was increased from 80 to 100
degC therefore 80 degC was considered as an optimum reaction temperature for further
studies (Table 51 entries 4-5) When CO pressure was increased from 73 psi to 145
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
229
psi equivalent yield of the desired product was observed (Table 51 entry 6) Hence
the finalized reaction conditions were base Et3N temperature 80 degC solvent
alcohol (also as a nucleophile) time 3 h and 73 psi of CO pressure
Table 51 Effect of bases temperature and time on ImmPd-IL catalyzed
alkoxycarbonylation reactiona
Entry Base Temp
(degC)
CO Press
(psi)
Yield
()b
1 K2CO3 80 73 80
2 Cs2CO3 80 73 79
3 DBU 80 73 85
4 Et3N 80 73 96
5 Et3N 100 73 97
6 Et3N 100 145 98
a Reaction conditions
Iodobenzene (2 mmol) methyl alcohol (5 mL) ImmPd-IL (2
mol ) Et3N (3 mmol) 73 psi CO press Temp (80 degC) Time (3 h) b Yield based on GC analysis
These optimized reaction parameters were then successfully applied to variety
of aryl iodides with different alcohols (Table 52) Model reaction of iodobenzene
with methyl alcohol provided 94 isolated yield of methyl benzoate (Table 52 entry
1) Ethyl alcohol and benzyl alcohol also reacts efficiently with iodobenzene
providing 95 and 89 yield of ethyl benzoate and benzyl benzoate respectively
(Table 52 entries 1-3) The substituted iodobenzene derivatives 4-iodoaniline and 4-
iodophenol furnished 80 and 75 yield of the methyl 4-aminobenzoate and methyl
4-hydroxybenzoate respectively (Table 52 entries 4-5) 4-Acetyliodobenzene reacts
with ethanol and provided 81 yield of ethyl-4-acetylbenzoate (Table 52 entry 6)
Iodonaphthalene furnished 79 yield of methyl 2-naphthoate (Table 52 entry 7)
whereas 1-iodo-4-nitrobenzene efficiently reacts with methyl alcohol furnishing a
moderate yield (70) of methyl 4-nitrobenzoate (Table 52 entry 8)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
230
Table 52 ImmPd-IL catalyzed alkoxycarbonylation of aryl iodides with various
alcoholsa
Entry Aryl iodide Alcohol Product Yield
()b
1
MeOH
94
2
EtOH
95
3
89
4
MeOH
80
5
MeOH
75
6
EtOH
81
7
MeOH
79
8
MeOH
70
a Reaction conditions aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
Et3N (3 mmol) 73 psi CO press Temp (80 degC) Time (3 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
231
It is believed that the supported palladium metal leaches out from the solid
support and goes into the solution at higher temperature and the reaction was
catalyzed mainly by dissolved palladium species (Tambade et al 2008) Hence to
determine whether the reaction was catalyzed due to the ImmPd-IL complex or a
leached palladium metal that comes off the support at higher temperature during the
reaction a hot filtration test was performed (Lempers 1998 Zhao 2009)
Hot filtration experiment was performed for the alkoxycarbonylation of
iodobenzene with benzyl alcohol using ImmPd-IL catalyst Reaction was carried out
at 80 oC during reaction the ImmPd-IL complex catalyst was filtered off and the
filtrate without addition of catalyst was allowed to react further It was found that no
further reaction occurred after this hot filtration procedure hence this experimental
finding suggests there is no palladium leaching from the ImmPd-IL complex during
the progress of a reaction In addition to reconfirm this observation ICP-AES
analysis of the reaction mixture was carried out after 15 and 3 h which revealed a
below detectable level (below 001 ppm) of palladium in solution
It is also important to study the separation and recyclability of the catalyst
The ImmPd-IL catalyst was separated from the reaction mixture by a simple filtration
procedure and was found to be effective up to four consecutive recycles for
methoxycarbonylation reaction (Figure 52) No significant decrease in yield during
recycle study was observed
Figure 52 Recycle study of ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
232
523 PHENOXYCARBONYLATION REACTIONS
ImmPd-IL catalytic system was further explored for the phenoxycarbonylation of aryl
iodides with various phenols to yield corresponding phenyl esters and it was observed
that corresponding products were obtained in good to excellent yields (Scheme 526)
Scheme 526 Phenoxycarbonylation of aryl iodides with phenols using ImmPd-IL
For the optimization of reaction the influence of critical parameters such as
solvent base and CO pressure on the carbonylation of iodobenzene with phenol as a
nucleophile have been investigated (Table 53 entries 1-8)
Table 53 Effect of solvents and bases on ImmPd-IL catalyzed Phenoxycarbonylation
reactiona
Entry Solvent Base CO Press
(psi)
Yield
()b
1 DMF Et3N 145 56
2 14-Dioxane Et3N 145 62
3
Water Et3N 145 0
4 Toluene Et3N 145 90
5 Toluene DBU 145 80
6 Toluene K2CO3 145 66
7 Toluene Cs2CO3 145 72
8 Toluene Et3N 73 85
a Reaction conditions Iodobenzene (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
base (3 mmol) solvent (10 mL) 8 h at 100 degC b Yield based on GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
233
The role of various solvents such as NN-dimethyl formamide (DMF) (56)
14-dioxane (62) water (0) and toluene (90) was studied (Table 53 entries 1-
4) It was observed that the reaction was more favourable using toluene as a solvent
and provided 90 yield of phenyl benzoate (Table 54 entry 4) Various screened
organic and inorganic bases (K2CO3 Cs2CO3 DBU and Et3N) showed Et3N (90) to
be superior base at 100 degC (Table 53 entries 4-7) The initial reaction was carried out
at 145 psi CO pressure which provided 90 yield of phenyl benzoate a further
decrease in CO pressure up to 73 psi decreased the yield of the phenyl benzoate
(Table 53 entry 8) Hence the finalized reaction parameters were Et3N as a base in
toluene CO 73 psi at 100 degC for 8 h
These finalized reaction parameters were then applied for the
phenoxycarbonylation of different aryl halides and phenols having different electron-
donating or withdrawing groups (Table 54 entries 1-7) Iodobenzene reacts
efficiently with phenol within 8 h providing 89 isolated yield of phenyl benzoate
(Table 54 entry 1) Substituted phenols such as p-cresol p-methoxyphenol and p-
chlorophenol reacts with iodobenzene furnishing good to excellent yields of the
corresponding product (Table 54 entries 2-4) The substituted iodobenzene
derivative reacts with phenol and provided 86 yields of phenyl 4-methoxybenzoate
(Table 54 entry 5) 1-Iodo-4-nitrobenzene furnished moderate yield (59) of the
phenyl 4-nitrobenzoate (Table 54 entry 6) Reaction of 1-iodonaphthalene with
phenol provided 75 yield of phenyl 1-naphthoate (Table 54 entry 7)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
234
Table 54 ImmPd-IL catalyzed Phenoxycarbonylation of aryl iodides with various
phenolsa
Entry Aryl iodide Phenol Product Yield
()b
1
89
2
90
3
88
4
84
5
86
6
59
7
75
a Reaction conditions aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
235
524 AMINOCARBONYLATION REACTIONS
The scope of ImmPd-IL was further extended for aminocarbonylation of aryl iodides
with a range of aliphatic aromatic primary and secondary amines (Scheme 527)
Scheme 527 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with amines
The reaction of iodobenzene with aniline was selected as a model reaction for
optimization Various solvents such as DMF (80) water (70) anisole (60) and
toluene (92) were screened for the reaction (ionic liquid was insoluble in water as it
was immobilised on solid support) but toluene was found to be the best solvent
(Table 55 entries 1-4) Screening of a variety of bases showed Et3N (90) to be
superior at 100 degC (Table 55 entries 4-6) Further reaction was optimized with
respect to various reaction parameters including temperature time and CO pressure
and the best optimized reaction conditions were then applied for the
aminocarbonylation of a variety of iodoaryls and amines
Table 55 Effect of solvents and bases on ImmPd-IL catalyzed aminocarbonylation
reactiona
Entry Solvent Base Yield
()b
1 DMF Et3N 80
2 Water Et3N 70
3
Anisole Et3N 60
4 Toluene Et3N 92
5 Toluene Na2CO3 52
6 Toluene K2CO3 57
a Reaction conditions
Iodobenzene (1 mmol) aniline (2 mmol) ImmPd-IL (2 mol)
Et3N (3 mmol) Toluene (10 mL) 8 h at 100 degC 145 psi CO pressure b Yield based GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
236
The optimized reaction parameters were then applied for the
aminocarbonylation of substituted aryl halides and aromatic amines The model
reaction of iodobenzene with aniline provided 90 isolated yield of N-
phenylbenzamide under optimized reaction conditions (Table 56 entry 1) 4-
iodoanisole furnished 85 yield of 4-methoxy-N-phenylbenzamide (Table 56 entries
2) 4-methoxyaniline reacts with iodobenzene and provided 88 yield of N-(4-
methoxyphenyl)benzamide (Table 56 entry 3) 3-(Trifluoromethyl)aniline provided a
moderate yield of the expected product (Table 56 entry 4)
There after various primary aliphatic amines were screened for the
aminocarbonylation Cyclohexyl amine efficiently reacts with iodobenzene and 2-
iodonaphthalene and provided 92 and 80 yield of N-cyclohexylbenzamide and N-
cyclohexyl-1-naphthamide respectively (Table 56 entries 5-6) Reaction of
iodobenzene and 4-iodo acetophenone with tert-butyl amine furnished 92 and 89
yield of respective amide (Table 56 entry 7-8) Benzyl amine provided excellent
yields of N-benzylbenzamide (Table 56 entry 9) To our delight aromatic secondary
amine such as N-methyl aniline efficiently reacts with iodobenzene furnishing 91
yield of N-methyl-N-phenylbenzamide (Table 56 entry 10)
Table 56 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with various
aliphatic and aromatic primary amines and secondary aminesa
Entry Aryl iodide Amine Product Yield
()b
1
90
2
85
3
88
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
237
4
75
5
92
6
80
7
92
8
89
9
90
10
91
a Reaction conditions aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
238
53 CONCLUSION
The present study reports an efficient and common protocol for
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
by using a well-defined heterogeneous ImmPd-IL complex as a versatile
catalyst
The ease of preparation of the complex indefinite shelf life stability towards
air makes it an ideal complex for the above transformations
The reaction system was optimized with respect to various reaction parameters
and applied for carbonylation of a range of aryl iodides with different types of
alcohols phenols and amines furnishing good to excellent yields of the
corresponding products
The present protocol provided high yields of the desired products for all
carbonylation protocols
All the reactions were carried out under milder operating conditions
Catalytic system showed excellent activity and selectivity and effectively
recycled for four consecutive cycles
The leaching of the Pd metal was examined by hot filteration test and ICP-
AES analysis which revels no significant leaching of the palladium occurs
during the reaction
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
239
54 EXPERIMENTAL
541 Materials and Method N-methylimidazole (99+) and 3-trimethoxysilylpropyl
chloride (97+) were purchased from Aldrich PdCl2 was purchased from WAKO
Anhydrous redistilled 1-methylimidazole (99+) was purchased from Aldrich All
the dehydrated solvents were obtained from WAKO Aerosil 300 (300 m2g) was
obtained from Japan Aerosil Co and calcined at 573 K for 15 h in air and 30 min in
vacuum before use as a support The procedures for catalyst preparation were based
previous publication (Sasaki et al 2008) with some modifications Prepared catalyst
was characterized by using IR and elemental analysis and loading of the catalyst was
calculated by XRF measurements (SEA-2010 Seiko Electronic Industrial Co) The
XPS of ImmPd-IL was measured using a PHI5000 Versa Probe with monochromatic
focused (100 times 100 μm) Al Kα X-ray radiation (15 kV 30 mA) and dual beam
neutralization using a combination of argon ion gun and electron irradiation
The products are well-known in the literature and were compared with
authentic samples Progress of the reaction was monitored by gas chromatography
(GC) Gas chromatography analysis was carried out on Perkin-Elmer Clarus 400 GC
equipped flame ionization detector with a capillary column (Elite-1 30 m times 032 mm
times 025 μm) using the external standard method A GCMS-QP 2010 instrument (Rtx-
17 30 m times 25 mm id film thickness 025 μm df) (column flow 2 mL minminus1
80-240
degC at 10 degCmin rise) The 1H NMR spectra were recorded on Varian-300 MHz FT-
NMR spectrometer in CDCl3 using TMS as the internal standard The 13
C NMR
spectra were recorded with a JEOL FT-NMR model-AL300 (75 MHz) spectrometer
in CDCl3 Chemical shifts are reported in parts per million (δ) relative to
tetramethylsilane as the internal standard J (coupling constant) values were reported
in hertz (Hz) Proton splitting patterns are described as s (singlet) d (doublet) t
(triplet) and m (multiplet)
542 Preparation of immobilized palladium metal ion-containing ionic liquid
1-methyl-3-(3-trimethoxysilylpropyl) imidazolium chloride was synthesized by
mixing N-methylimidazole (0690 mol) and 3-trimethoxysilylpropyl chloride (0690
mol) in a dry 300 mL flask under a nitrogen atmosphere and refluxed for 48 h After
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
240
cooling to room temperature the resultant liquid was washed by dehydrated ethyl
acetate five times and dried at room temperature under reduced pressure for 48 h
The obtained compound was stored at 253 K under dry nitrogen Silica (Aerosil 300
surface area 300 m2g calcined at 573 K for 15 h in air) and 1-methyl-3-(3-
trimethoxysilylpropyl) imidazolium chloride (weight ratio 11) was dispersed in
dehydrated toluene and the mixture was refluxed for 48 h under nitrogen
After the reflux toluene was removed by filtration using glass filter and the
excess ionic liquid was removed by washing with dichloromethane several times The
resultant solid is denoted as Imm-IL In the next step Imm-IL was added to an
acetonitrile solution of PdCl2 and refluxed for 24 h Acetonitrile and excess of metal
chloride were removed by washing acetone using glass filter several times The metal
loading of ImmPd-IL was 34 wt as determined by XRF measurements (SEA-2010
Seiko Electronic Industrial Co)
543 General Experimental Procedure for Alkoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
and Et3N (3 mmol) were added The autoclave was closed purged three times with
carbon monoxide pressurized with 73 psi of CO and heated at 80 degC for 3 h After
completion of the reaction the reactor was cooled to room temperature and the
remaining CO gas was carefully vented and the reactor was opened The reactor
vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to remove any traces of
product and catalyst if present The catalyst was filtered and the reaction mixture was
evaporated under vacuum The residue obtained was purified by column
chromatography (silica gel 60-120 mesh petroleum etherethyl acetate 9505) to
afford the desired product
544 General Experimental Procedure for Recycling of ImmPd-IL
After completion of reaction the reaction mixture was cooled to room temperature
and the catalyst was collected by filtration The filtered catalyst was washed with
distilled water (3 times 5 mL) and methanol (3 times 5 mL) to remove all traces of product or
reactant present The filtered catalyst was then dried under reduced pressure The
dried catalyst was then used for the alkoxycarbonylation reaction of iodobenzene with
methanol for the recyclability experiment
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
241
545 XPS spectra of ImmPd-IL catalyst
The XPS spectra of ImmPd-IL shows that two peaks at 337 and 3424 eV for fresh
Imm-Pd are assigned as 3d52 and 3d32 for Pd2+
species respectively (Figure 53)
For the first recycle sample new peaks appear at 3342 and 3392 eV which are
assigned as 3d52 and 3d32 for Pd(0) species respectively indicating that the
reduction of the Pd species takes place during the catalytic reaction From the
spectrum of the fourth recycle sample it is obvious that the component of Pd2+
is
decreasing upon recycles although the component of Pd(0) remains constant
Figure 53 XPS of Pd 3d and Cl 2p for ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
242
546 General Experimental Procedure for Phenoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h After the completion of the reaction the reactor was cooled to room
temperature and the remaining CO gas was carefully vented and the reactor was
opened The reactor vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to
remove any traces of product and catalyst if present The catalyst was filtered and the
reaction mixture was evaporated under vacuum The residue obtained was purified by
column chromatography (silica gel 60-120 mesh petroleum etherethyl acetate
9505) to afford the desired product
547 General Experimental Procedure for Aminocarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol)
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h (the ensuing procedure is the same as that discussed above for the phenoxy
carbonylation reaction)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
243
55 SPECTRAL DATA
Methyl benzoate
GC-MS (EI 70 eV) mz () = 136 [M+] (35) 105 (100) 77 (55) 51 (20)
Ethyl benzoate
GC-MS (EI 70 eV) mz () = 150 [M+] (21) 122 (30) 105 (100) 77 (55)
Benzyl benzoate
1H NMR (300 MHz CDCl3) δ 804-808 (m 2H ArH) 731-752 (m 8H
ArH) 53 (s 2H CH2) 13
C NMR (75 MHz CDCl3) δ 16648 13619 13312
13025 12981 12870 12848 12834 12827 6677
Methyl 4-aminobenzoate
1H NMR (300 MHz CDCl3) δ 783 (d 2H J = 87 Hz ArH) 661 (d 2H J =
87 Hz ArH) 414 (br s 2H NH2) 383 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16724 15107 13151 11927 11368 5155
Methyl 4-hydroxybenzoate
1H NMR (300 MHz CDCl3) δ 794 (d 2H J = 87 Hz ArH) 722 (br s 1H
OH) 690 (d 2H J = 87 Hz ArH) 390 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16778 16055 13203 12201 11539 5223
Methyl 2-naphthoate
1H NMR (300 MHz CDCl3) δ 850 (s 1H ArH) 798-805 (m 2H ArH)
773 (t 2H J = 84 Hz ArH) 754-761 (m 2H ArH) 396 (s 3H OCH3) 13
C NMR
(75 MHz CDCl3) δ 16685 13634 13087 13082 13013 12938 12901 12778
12720 12632 12260 5235
Ethyl 4-acetylbenzoate
1H NMR (300 MHz CDCl3) δ 814-811 (m 2H ArH) 802-799 (m 2H
ArH) 441 (q 2H J = 69Hz CH2CH3) 265 (s 3H COCH3) 142 (t 3H J = 69Hz
CH2CH3) 13
C NMR (75 MHz CDCl3) δ 19766 16576 14012 13424 12977
12817 6147 2689 1427
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
244
Phenyl benzoate
1H NMR (300 MHz CDCl3) δ 825-822 (m 2H ArH) 768-863 (m 1H
ArH) 756-742 (m 4H ArH) 732-723 (m 3H ArH) 13
C NMR (75 MHz CDCl3)
δ 16590 15103 13365 13023 12964 12956 12864 12596 1217 GC-MS (EI
70 eV) mz () = 198 [M+] (9) 105 (100) 77 (40) 51 (9)
phenyl 4-nitrobenzoate
1H NMR (300 MHz CDCl3) δ = 837 (s 4H ArH) 723-748 (m 5H ArH)
13C NMR (75 MHz CDCl3) δ = 16347 15110 15072 13517 13144 12984
12657 12388 12157 GC-MS (EI 70 eV) mz () = 243 [M+] (15) 150 (100) 77
(10)
phenyl 4-methoxybenzoate
1H NMR (300 MHz CDCl3) δ = 814-816 (d 2H J = 87Hz ArH) 720-741
(m 5H ArH) 696-698 (d 2H J = 87 Hz ArH) 386 (s 3H OCH3) GC-MS (EI
70 eV) mz () = 228 [M+] (5) 135 (100) 107 (9) 77 (20)
phenyl-1-naphthoate
1H NMR (300 MHz CDCl3) δ = 904 (d 1H ArH) 845 (d1H ArH) 804
(d 1H ArH) 788 (d 1H ArH) 742-763 (m 5H ArH) 726-728 (m 3H ArH)
13C NMR (70 MHz CDCl3) δ = 16594 15118 13440 13408 13182 13134
12968 12883 12850 12829 12650 12605 12590 12465 12203
N-phenylbenzamide
1H NMR (300 MHz CDCl3) δ 798 (br s 1H NH) 787-883 (m 2H ArH)
763 (d 2H J = 76 Hz ArH) 732-753 (m 5H ArH) 716 (t 1H J = 73 ArH) 13
C
NMR (75 MHz CDCl3) δ 16590 13798 13502 13186 12911 12880 12709
12461 12032 ppm GC-MS mz () = 197 [M+] (42) 105 (100) 77 (54)
4-acetyl-N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 806 (d 2H J = 84Hz ArH) 777 (d 2H J
= 84Hz ArH) 601 (br s 1H NH) 393 (s 3H CH3) 148 (s 9H) 13
C NMR (75
MHz CDCl3) δ 16640 16605 13987 13234 12979 12682 5239 5195 2883
ppm GC-MS (EI 70 eV) mz () = 219 [M+] (20) 186 (22) 148 (100) 130 (30) 76
(20)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
225
Scheme 519 Pd(0) nanoparticles catalyzed aminocarbonylation of heteroaryl iodides
An efficient methodology for the synthesis of amides via palladium-catalyzed
aminocarbonylation of aryl iodides was reported by Castill et al (2012) using the
bulky cis-12-bis[(di-tert-butylphosphino)methyl]cyclohexane ligand under
atmospheric pressure of carbon monoxide (Scheme 520) A broad range of iodoaryl
derivatives with different amine were screened
Scheme 520 PdP(Fc)(t-Bu)2 catalyzed aminocarbonylation
Recently Dang et al (2012) reported an aminocarbonylation of aryl iodides
using palladium nanoparticles supported on MOF-5 (metal-organic frameworks)
(Scheme 521) Various palladium supported catalysts using different solid supports
like Silica Al2O3 and MOF has been synthesized but palladium catalyst supported on
MOF-5 provided better results The developed catalytic system worked under
atmospheric pressure of carbon monoxide and was applied for the synthesis of various
substituted amides furthermore the catalyst was also recycled
Scheme 521 Pd nanoparticles supported on MOF-5 catalyzed aminocarbonylation
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
226
Begouin et al (2009) have demonstrated that [Mo(CO)6] can be successfully
used as a CO source in aminocarbonylation reactions (Scheme 522) Range of aryl
and heteroaryl substrates either halides or amines were tested for the
aminocarbonylation reactions
Scheme 522 CO free aminocarbonylation using Mo(CO)6
Literature reports reveals that alkoxyphenoxycarbonylation and
aminocarbonylation were well explored by using a variety of homogeneous Pd
complexes with different air and moisture sensitive NP containing ligands which had
problems in the recovery and recycling of the expensive palladium catalyst Also there
is no general protocol developed which could efficiently catalyze the carbonylation of
aryl iodide with different nucleophiles such as phenols alcohols and amines Thus
there is a need to develop a chemically well defined air stable single-component Pd-
complex which can efficiently catalyze different carbonylation reactions including
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
Considering this immobilization strategies for metal complex wherein the
metal is coordinated to a ligand grafted on to an inorganic or organic support has been
developed (Lu and Toy 2009 Byun and Lee 2004) Ionic liquids containing metal
ions are considered as catalytic precursors and they can be immobilized on solid
support thus facilitates the reuse of catalyst finding a promising use in organic
transformations (Doorslaer et al 2010 Sasaki et al 2005 Sasaki et al 2008 Zhong
et al 2006) In this regards immobilized palladium metal ion containing ionic liquid
[ImmPd-IL] is explored for alkoxycarbonylation phenoxycarbonylation and
aminocarbonylation reactions
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
227
52 RESULTS AND DISCUSSION
Considering the objective of the development of efficient phosphine free
heterogeneous and recyclable protocol immobilized palladium metal ion containing
ionic liquid (ImmPd-IL) was used as a common catalyst for alkoxycarbonylation
phenoxycarbonylation and aminocarbonylation reactions (Scheme 523) The
methodology offers synthesis of various carbonyl compounds including aliphatic
esters aromatic esters and amides from corresponding alcohol phenol and amines
The protocol is advantageous due to the ease in handling of the catalyst and simple
workup procedure and effective catalyst recyclability
Scheme 523 ImmPd-IL catalyzed different carbonylation reactions
521 Preparation of immobilized palladium metal ion containing ionic liquid
(ImmPd-IL) catalyst
Preparation of immobilized palladium metal ion-containing ionic liquid catalyst
(ImmPd-IL) is a two step process (Scheme 524) The first step involves the anchoring
of ionic liquid on to a silica support which gives immobilized ionic liquid (Imm-IL)
In a second step the synthesized Imm-IL is loaded with palladium metal ion (PdCl2)
which results immobilized palladium ion-containing ionic liquid (ImmPd-IL)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
228
Scheme 524 Preparation of immobilized ImmPd-IL
522 ALKOXYCARBONYLATION REACTIONS
Initially alkoxycarbonylation reaction of aryl iodide with aliphatic alcohols was
studied (Scheme 525)
Scheme 525 ImmPd-IL catalyzed alkoxycarbonylation of aryl iodides with alcohols
The effect of various reaction parameters like base temperature time and CO
pressure using ImmPd-IL as a catalyst was studied (Table 51) The reaction of
iodobenzene with methyl alcohol in presence of CO was chosen as model reaction for
the optimization To study the role of base the reaction was carried out using various
inorganic bases like K2CO3 (80) Cs2CO3 (79) and organic bases like DBU (85)
Et3N (96) (Table 51 entries 1-4) As Et3N provided maximum yield of the methyl
benzoate it was used for further study No profound increase in the yield of methyl
benzoate was observed when the reaction temperature was increased from 80 to 100
degC therefore 80 degC was considered as an optimum reaction temperature for further
studies (Table 51 entries 4-5) When CO pressure was increased from 73 psi to 145
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
229
psi equivalent yield of the desired product was observed (Table 51 entry 6) Hence
the finalized reaction conditions were base Et3N temperature 80 degC solvent
alcohol (also as a nucleophile) time 3 h and 73 psi of CO pressure
Table 51 Effect of bases temperature and time on ImmPd-IL catalyzed
alkoxycarbonylation reactiona
Entry Base Temp
(degC)
CO Press
(psi)
Yield
()b
1 K2CO3 80 73 80
2 Cs2CO3 80 73 79
3 DBU 80 73 85
4 Et3N 80 73 96
5 Et3N 100 73 97
6 Et3N 100 145 98
a Reaction conditions
Iodobenzene (2 mmol) methyl alcohol (5 mL) ImmPd-IL (2
mol ) Et3N (3 mmol) 73 psi CO press Temp (80 degC) Time (3 h) b Yield based on GC analysis
These optimized reaction parameters were then successfully applied to variety
of aryl iodides with different alcohols (Table 52) Model reaction of iodobenzene
with methyl alcohol provided 94 isolated yield of methyl benzoate (Table 52 entry
1) Ethyl alcohol and benzyl alcohol also reacts efficiently with iodobenzene
providing 95 and 89 yield of ethyl benzoate and benzyl benzoate respectively
(Table 52 entries 1-3) The substituted iodobenzene derivatives 4-iodoaniline and 4-
iodophenol furnished 80 and 75 yield of the methyl 4-aminobenzoate and methyl
4-hydroxybenzoate respectively (Table 52 entries 4-5) 4-Acetyliodobenzene reacts
with ethanol and provided 81 yield of ethyl-4-acetylbenzoate (Table 52 entry 6)
Iodonaphthalene furnished 79 yield of methyl 2-naphthoate (Table 52 entry 7)
whereas 1-iodo-4-nitrobenzene efficiently reacts with methyl alcohol furnishing a
moderate yield (70) of methyl 4-nitrobenzoate (Table 52 entry 8)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
230
Table 52 ImmPd-IL catalyzed alkoxycarbonylation of aryl iodides with various
alcoholsa
Entry Aryl iodide Alcohol Product Yield
()b
1
MeOH
94
2
EtOH
95
3
89
4
MeOH
80
5
MeOH
75
6
EtOH
81
7
MeOH
79
8
MeOH
70
a Reaction conditions aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
Et3N (3 mmol) 73 psi CO press Temp (80 degC) Time (3 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
231
It is believed that the supported palladium metal leaches out from the solid
support and goes into the solution at higher temperature and the reaction was
catalyzed mainly by dissolved palladium species (Tambade et al 2008) Hence to
determine whether the reaction was catalyzed due to the ImmPd-IL complex or a
leached palladium metal that comes off the support at higher temperature during the
reaction a hot filtration test was performed (Lempers 1998 Zhao 2009)
Hot filtration experiment was performed for the alkoxycarbonylation of
iodobenzene with benzyl alcohol using ImmPd-IL catalyst Reaction was carried out
at 80 oC during reaction the ImmPd-IL complex catalyst was filtered off and the
filtrate without addition of catalyst was allowed to react further It was found that no
further reaction occurred after this hot filtration procedure hence this experimental
finding suggests there is no palladium leaching from the ImmPd-IL complex during
the progress of a reaction In addition to reconfirm this observation ICP-AES
analysis of the reaction mixture was carried out after 15 and 3 h which revealed a
below detectable level (below 001 ppm) of palladium in solution
It is also important to study the separation and recyclability of the catalyst
The ImmPd-IL catalyst was separated from the reaction mixture by a simple filtration
procedure and was found to be effective up to four consecutive recycles for
methoxycarbonylation reaction (Figure 52) No significant decrease in yield during
recycle study was observed
Figure 52 Recycle study of ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
232
523 PHENOXYCARBONYLATION REACTIONS
ImmPd-IL catalytic system was further explored for the phenoxycarbonylation of aryl
iodides with various phenols to yield corresponding phenyl esters and it was observed
that corresponding products were obtained in good to excellent yields (Scheme 526)
Scheme 526 Phenoxycarbonylation of aryl iodides with phenols using ImmPd-IL
For the optimization of reaction the influence of critical parameters such as
solvent base and CO pressure on the carbonylation of iodobenzene with phenol as a
nucleophile have been investigated (Table 53 entries 1-8)
Table 53 Effect of solvents and bases on ImmPd-IL catalyzed Phenoxycarbonylation
reactiona
Entry Solvent Base CO Press
(psi)
Yield
()b
1 DMF Et3N 145 56
2 14-Dioxane Et3N 145 62
3
Water Et3N 145 0
4 Toluene Et3N 145 90
5 Toluene DBU 145 80
6 Toluene K2CO3 145 66
7 Toluene Cs2CO3 145 72
8 Toluene Et3N 73 85
a Reaction conditions Iodobenzene (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
base (3 mmol) solvent (10 mL) 8 h at 100 degC b Yield based on GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
233
The role of various solvents such as NN-dimethyl formamide (DMF) (56)
14-dioxane (62) water (0) and toluene (90) was studied (Table 53 entries 1-
4) It was observed that the reaction was more favourable using toluene as a solvent
and provided 90 yield of phenyl benzoate (Table 54 entry 4) Various screened
organic and inorganic bases (K2CO3 Cs2CO3 DBU and Et3N) showed Et3N (90) to
be superior base at 100 degC (Table 53 entries 4-7) The initial reaction was carried out
at 145 psi CO pressure which provided 90 yield of phenyl benzoate a further
decrease in CO pressure up to 73 psi decreased the yield of the phenyl benzoate
(Table 53 entry 8) Hence the finalized reaction parameters were Et3N as a base in
toluene CO 73 psi at 100 degC for 8 h
These finalized reaction parameters were then applied for the
phenoxycarbonylation of different aryl halides and phenols having different electron-
donating or withdrawing groups (Table 54 entries 1-7) Iodobenzene reacts
efficiently with phenol within 8 h providing 89 isolated yield of phenyl benzoate
(Table 54 entry 1) Substituted phenols such as p-cresol p-methoxyphenol and p-
chlorophenol reacts with iodobenzene furnishing good to excellent yields of the
corresponding product (Table 54 entries 2-4) The substituted iodobenzene
derivative reacts with phenol and provided 86 yields of phenyl 4-methoxybenzoate
(Table 54 entry 5) 1-Iodo-4-nitrobenzene furnished moderate yield (59) of the
phenyl 4-nitrobenzoate (Table 54 entry 6) Reaction of 1-iodonaphthalene with
phenol provided 75 yield of phenyl 1-naphthoate (Table 54 entry 7)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
234
Table 54 ImmPd-IL catalyzed Phenoxycarbonylation of aryl iodides with various
phenolsa
Entry Aryl iodide Phenol Product Yield
()b
1
89
2
90
3
88
4
84
5
86
6
59
7
75
a Reaction conditions aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
235
524 AMINOCARBONYLATION REACTIONS
The scope of ImmPd-IL was further extended for aminocarbonylation of aryl iodides
with a range of aliphatic aromatic primary and secondary amines (Scheme 527)
Scheme 527 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with amines
The reaction of iodobenzene with aniline was selected as a model reaction for
optimization Various solvents such as DMF (80) water (70) anisole (60) and
toluene (92) were screened for the reaction (ionic liquid was insoluble in water as it
was immobilised on solid support) but toluene was found to be the best solvent
(Table 55 entries 1-4) Screening of a variety of bases showed Et3N (90) to be
superior at 100 degC (Table 55 entries 4-6) Further reaction was optimized with
respect to various reaction parameters including temperature time and CO pressure
and the best optimized reaction conditions were then applied for the
aminocarbonylation of a variety of iodoaryls and amines
Table 55 Effect of solvents and bases on ImmPd-IL catalyzed aminocarbonylation
reactiona
Entry Solvent Base Yield
()b
1 DMF Et3N 80
2 Water Et3N 70
3
Anisole Et3N 60
4 Toluene Et3N 92
5 Toluene Na2CO3 52
6 Toluene K2CO3 57
a Reaction conditions
Iodobenzene (1 mmol) aniline (2 mmol) ImmPd-IL (2 mol)
Et3N (3 mmol) Toluene (10 mL) 8 h at 100 degC 145 psi CO pressure b Yield based GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
236
The optimized reaction parameters were then applied for the
aminocarbonylation of substituted aryl halides and aromatic amines The model
reaction of iodobenzene with aniline provided 90 isolated yield of N-
phenylbenzamide under optimized reaction conditions (Table 56 entry 1) 4-
iodoanisole furnished 85 yield of 4-methoxy-N-phenylbenzamide (Table 56 entries
2) 4-methoxyaniline reacts with iodobenzene and provided 88 yield of N-(4-
methoxyphenyl)benzamide (Table 56 entry 3) 3-(Trifluoromethyl)aniline provided a
moderate yield of the expected product (Table 56 entry 4)
There after various primary aliphatic amines were screened for the
aminocarbonylation Cyclohexyl amine efficiently reacts with iodobenzene and 2-
iodonaphthalene and provided 92 and 80 yield of N-cyclohexylbenzamide and N-
cyclohexyl-1-naphthamide respectively (Table 56 entries 5-6) Reaction of
iodobenzene and 4-iodo acetophenone with tert-butyl amine furnished 92 and 89
yield of respective amide (Table 56 entry 7-8) Benzyl amine provided excellent
yields of N-benzylbenzamide (Table 56 entry 9) To our delight aromatic secondary
amine such as N-methyl aniline efficiently reacts with iodobenzene furnishing 91
yield of N-methyl-N-phenylbenzamide (Table 56 entry 10)
Table 56 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with various
aliphatic and aromatic primary amines and secondary aminesa
Entry Aryl iodide Amine Product Yield
()b
1
90
2
85
3
88
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
237
4
75
5
92
6
80
7
92
8
89
9
90
10
91
a Reaction conditions aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
238
53 CONCLUSION
The present study reports an efficient and common protocol for
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
by using a well-defined heterogeneous ImmPd-IL complex as a versatile
catalyst
The ease of preparation of the complex indefinite shelf life stability towards
air makes it an ideal complex for the above transformations
The reaction system was optimized with respect to various reaction parameters
and applied for carbonylation of a range of aryl iodides with different types of
alcohols phenols and amines furnishing good to excellent yields of the
corresponding products
The present protocol provided high yields of the desired products for all
carbonylation protocols
All the reactions were carried out under milder operating conditions
Catalytic system showed excellent activity and selectivity and effectively
recycled for four consecutive cycles
The leaching of the Pd metal was examined by hot filteration test and ICP-
AES analysis which revels no significant leaching of the palladium occurs
during the reaction
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
239
54 EXPERIMENTAL
541 Materials and Method N-methylimidazole (99+) and 3-trimethoxysilylpropyl
chloride (97+) were purchased from Aldrich PdCl2 was purchased from WAKO
Anhydrous redistilled 1-methylimidazole (99+) was purchased from Aldrich All
the dehydrated solvents were obtained from WAKO Aerosil 300 (300 m2g) was
obtained from Japan Aerosil Co and calcined at 573 K for 15 h in air and 30 min in
vacuum before use as a support The procedures for catalyst preparation were based
previous publication (Sasaki et al 2008) with some modifications Prepared catalyst
was characterized by using IR and elemental analysis and loading of the catalyst was
calculated by XRF measurements (SEA-2010 Seiko Electronic Industrial Co) The
XPS of ImmPd-IL was measured using a PHI5000 Versa Probe with monochromatic
focused (100 times 100 μm) Al Kα X-ray radiation (15 kV 30 mA) and dual beam
neutralization using a combination of argon ion gun and electron irradiation
The products are well-known in the literature and were compared with
authentic samples Progress of the reaction was monitored by gas chromatography
(GC) Gas chromatography analysis was carried out on Perkin-Elmer Clarus 400 GC
equipped flame ionization detector with a capillary column (Elite-1 30 m times 032 mm
times 025 μm) using the external standard method A GCMS-QP 2010 instrument (Rtx-
17 30 m times 25 mm id film thickness 025 μm df) (column flow 2 mL minminus1
80-240
degC at 10 degCmin rise) The 1H NMR spectra were recorded on Varian-300 MHz FT-
NMR spectrometer in CDCl3 using TMS as the internal standard The 13
C NMR
spectra were recorded with a JEOL FT-NMR model-AL300 (75 MHz) spectrometer
in CDCl3 Chemical shifts are reported in parts per million (δ) relative to
tetramethylsilane as the internal standard J (coupling constant) values were reported
in hertz (Hz) Proton splitting patterns are described as s (singlet) d (doublet) t
(triplet) and m (multiplet)
542 Preparation of immobilized palladium metal ion-containing ionic liquid
1-methyl-3-(3-trimethoxysilylpropyl) imidazolium chloride was synthesized by
mixing N-methylimidazole (0690 mol) and 3-trimethoxysilylpropyl chloride (0690
mol) in a dry 300 mL flask under a nitrogen atmosphere and refluxed for 48 h After
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
240
cooling to room temperature the resultant liquid was washed by dehydrated ethyl
acetate five times and dried at room temperature under reduced pressure for 48 h
The obtained compound was stored at 253 K under dry nitrogen Silica (Aerosil 300
surface area 300 m2g calcined at 573 K for 15 h in air) and 1-methyl-3-(3-
trimethoxysilylpropyl) imidazolium chloride (weight ratio 11) was dispersed in
dehydrated toluene and the mixture was refluxed for 48 h under nitrogen
After the reflux toluene was removed by filtration using glass filter and the
excess ionic liquid was removed by washing with dichloromethane several times The
resultant solid is denoted as Imm-IL In the next step Imm-IL was added to an
acetonitrile solution of PdCl2 and refluxed for 24 h Acetonitrile and excess of metal
chloride were removed by washing acetone using glass filter several times The metal
loading of ImmPd-IL was 34 wt as determined by XRF measurements (SEA-2010
Seiko Electronic Industrial Co)
543 General Experimental Procedure for Alkoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
and Et3N (3 mmol) were added The autoclave was closed purged three times with
carbon monoxide pressurized with 73 psi of CO and heated at 80 degC for 3 h After
completion of the reaction the reactor was cooled to room temperature and the
remaining CO gas was carefully vented and the reactor was opened The reactor
vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to remove any traces of
product and catalyst if present The catalyst was filtered and the reaction mixture was
evaporated under vacuum The residue obtained was purified by column
chromatography (silica gel 60-120 mesh petroleum etherethyl acetate 9505) to
afford the desired product
544 General Experimental Procedure for Recycling of ImmPd-IL
After completion of reaction the reaction mixture was cooled to room temperature
and the catalyst was collected by filtration The filtered catalyst was washed with
distilled water (3 times 5 mL) and methanol (3 times 5 mL) to remove all traces of product or
reactant present The filtered catalyst was then dried under reduced pressure The
dried catalyst was then used for the alkoxycarbonylation reaction of iodobenzene with
methanol for the recyclability experiment
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
241
545 XPS spectra of ImmPd-IL catalyst
The XPS spectra of ImmPd-IL shows that two peaks at 337 and 3424 eV for fresh
Imm-Pd are assigned as 3d52 and 3d32 for Pd2+
species respectively (Figure 53)
For the first recycle sample new peaks appear at 3342 and 3392 eV which are
assigned as 3d52 and 3d32 for Pd(0) species respectively indicating that the
reduction of the Pd species takes place during the catalytic reaction From the
spectrum of the fourth recycle sample it is obvious that the component of Pd2+
is
decreasing upon recycles although the component of Pd(0) remains constant
Figure 53 XPS of Pd 3d and Cl 2p for ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
242
546 General Experimental Procedure for Phenoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h After the completion of the reaction the reactor was cooled to room
temperature and the remaining CO gas was carefully vented and the reactor was
opened The reactor vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to
remove any traces of product and catalyst if present The catalyst was filtered and the
reaction mixture was evaporated under vacuum The residue obtained was purified by
column chromatography (silica gel 60-120 mesh petroleum etherethyl acetate
9505) to afford the desired product
547 General Experimental Procedure for Aminocarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol)
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h (the ensuing procedure is the same as that discussed above for the phenoxy
carbonylation reaction)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
243
55 SPECTRAL DATA
Methyl benzoate
GC-MS (EI 70 eV) mz () = 136 [M+] (35) 105 (100) 77 (55) 51 (20)
Ethyl benzoate
GC-MS (EI 70 eV) mz () = 150 [M+] (21) 122 (30) 105 (100) 77 (55)
Benzyl benzoate
1H NMR (300 MHz CDCl3) δ 804-808 (m 2H ArH) 731-752 (m 8H
ArH) 53 (s 2H CH2) 13
C NMR (75 MHz CDCl3) δ 16648 13619 13312
13025 12981 12870 12848 12834 12827 6677
Methyl 4-aminobenzoate
1H NMR (300 MHz CDCl3) δ 783 (d 2H J = 87 Hz ArH) 661 (d 2H J =
87 Hz ArH) 414 (br s 2H NH2) 383 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16724 15107 13151 11927 11368 5155
Methyl 4-hydroxybenzoate
1H NMR (300 MHz CDCl3) δ 794 (d 2H J = 87 Hz ArH) 722 (br s 1H
OH) 690 (d 2H J = 87 Hz ArH) 390 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16778 16055 13203 12201 11539 5223
Methyl 2-naphthoate
1H NMR (300 MHz CDCl3) δ 850 (s 1H ArH) 798-805 (m 2H ArH)
773 (t 2H J = 84 Hz ArH) 754-761 (m 2H ArH) 396 (s 3H OCH3) 13
C NMR
(75 MHz CDCl3) δ 16685 13634 13087 13082 13013 12938 12901 12778
12720 12632 12260 5235
Ethyl 4-acetylbenzoate
1H NMR (300 MHz CDCl3) δ 814-811 (m 2H ArH) 802-799 (m 2H
ArH) 441 (q 2H J = 69Hz CH2CH3) 265 (s 3H COCH3) 142 (t 3H J = 69Hz
CH2CH3) 13
C NMR (75 MHz CDCl3) δ 19766 16576 14012 13424 12977
12817 6147 2689 1427
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
244
Phenyl benzoate
1H NMR (300 MHz CDCl3) δ 825-822 (m 2H ArH) 768-863 (m 1H
ArH) 756-742 (m 4H ArH) 732-723 (m 3H ArH) 13
C NMR (75 MHz CDCl3)
δ 16590 15103 13365 13023 12964 12956 12864 12596 1217 GC-MS (EI
70 eV) mz () = 198 [M+] (9) 105 (100) 77 (40) 51 (9)
phenyl 4-nitrobenzoate
1H NMR (300 MHz CDCl3) δ = 837 (s 4H ArH) 723-748 (m 5H ArH)
13C NMR (75 MHz CDCl3) δ = 16347 15110 15072 13517 13144 12984
12657 12388 12157 GC-MS (EI 70 eV) mz () = 243 [M+] (15) 150 (100) 77
(10)
phenyl 4-methoxybenzoate
1H NMR (300 MHz CDCl3) δ = 814-816 (d 2H J = 87Hz ArH) 720-741
(m 5H ArH) 696-698 (d 2H J = 87 Hz ArH) 386 (s 3H OCH3) GC-MS (EI
70 eV) mz () = 228 [M+] (5) 135 (100) 107 (9) 77 (20)
phenyl-1-naphthoate
1H NMR (300 MHz CDCl3) δ = 904 (d 1H ArH) 845 (d1H ArH) 804
(d 1H ArH) 788 (d 1H ArH) 742-763 (m 5H ArH) 726-728 (m 3H ArH)
13C NMR (70 MHz CDCl3) δ = 16594 15118 13440 13408 13182 13134
12968 12883 12850 12829 12650 12605 12590 12465 12203
N-phenylbenzamide
1H NMR (300 MHz CDCl3) δ 798 (br s 1H NH) 787-883 (m 2H ArH)
763 (d 2H J = 76 Hz ArH) 732-753 (m 5H ArH) 716 (t 1H J = 73 ArH) 13
C
NMR (75 MHz CDCl3) δ 16590 13798 13502 13186 12911 12880 12709
12461 12032 ppm GC-MS mz () = 197 [M+] (42) 105 (100) 77 (54)
4-acetyl-N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 806 (d 2H J = 84Hz ArH) 777 (d 2H J
= 84Hz ArH) 601 (br s 1H NH) 393 (s 3H CH3) 148 (s 9H) 13
C NMR (75
MHz CDCl3) δ 16640 16605 13987 13234 12979 12682 5239 5195 2883
ppm GC-MS (EI 70 eV) mz () = 219 [M+] (20) 186 (22) 148 (100) 130 (30) 76
(20)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
226
Begouin et al (2009) have demonstrated that [Mo(CO)6] can be successfully
used as a CO source in aminocarbonylation reactions (Scheme 522) Range of aryl
and heteroaryl substrates either halides or amines were tested for the
aminocarbonylation reactions
Scheme 522 CO free aminocarbonylation using Mo(CO)6
Literature reports reveals that alkoxyphenoxycarbonylation and
aminocarbonylation were well explored by using a variety of homogeneous Pd
complexes with different air and moisture sensitive NP containing ligands which had
problems in the recovery and recycling of the expensive palladium catalyst Also there
is no general protocol developed which could efficiently catalyze the carbonylation of
aryl iodide with different nucleophiles such as phenols alcohols and amines Thus
there is a need to develop a chemically well defined air stable single-component Pd-
complex which can efficiently catalyze different carbonylation reactions including
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
Considering this immobilization strategies for metal complex wherein the
metal is coordinated to a ligand grafted on to an inorganic or organic support has been
developed (Lu and Toy 2009 Byun and Lee 2004) Ionic liquids containing metal
ions are considered as catalytic precursors and they can be immobilized on solid
support thus facilitates the reuse of catalyst finding a promising use in organic
transformations (Doorslaer et al 2010 Sasaki et al 2005 Sasaki et al 2008 Zhong
et al 2006) In this regards immobilized palladium metal ion containing ionic liquid
[ImmPd-IL] is explored for alkoxycarbonylation phenoxycarbonylation and
aminocarbonylation reactions
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
227
52 RESULTS AND DISCUSSION
Considering the objective of the development of efficient phosphine free
heterogeneous and recyclable protocol immobilized palladium metal ion containing
ionic liquid (ImmPd-IL) was used as a common catalyst for alkoxycarbonylation
phenoxycarbonylation and aminocarbonylation reactions (Scheme 523) The
methodology offers synthesis of various carbonyl compounds including aliphatic
esters aromatic esters and amides from corresponding alcohol phenol and amines
The protocol is advantageous due to the ease in handling of the catalyst and simple
workup procedure and effective catalyst recyclability
Scheme 523 ImmPd-IL catalyzed different carbonylation reactions
521 Preparation of immobilized palladium metal ion containing ionic liquid
(ImmPd-IL) catalyst
Preparation of immobilized palladium metal ion-containing ionic liquid catalyst
(ImmPd-IL) is a two step process (Scheme 524) The first step involves the anchoring
of ionic liquid on to a silica support which gives immobilized ionic liquid (Imm-IL)
In a second step the synthesized Imm-IL is loaded with palladium metal ion (PdCl2)
which results immobilized palladium ion-containing ionic liquid (ImmPd-IL)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
228
Scheme 524 Preparation of immobilized ImmPd-IL
522 ALKOXYCARBONYLATION REACTIONS
Initially alkoxycarbonylation reaction of aryl iodide with aliphatic alcohols was
studied (Scheme 525)
Scheme 525 ImmPd-IL catalyzed alkoxycarbonylation of aryl iodides with alcohols
The effect of various reaction parameters like base temperature time and CO
pressure using ImmPd-IL as a catalyst was studied (Table 51) The reaction of
iodobenzene with methyl alcohol in presence of CO was chosen as model reaction for
the optimization To study the role of base the reaction was carried out using various
inorganic bases like K2CO3 (80) Cs2CO3 (79) and organic bases like DBU (85)
Et3N (96) (Table 51 entries 1-4) As Et3N provided maximum yield of the methyl
benzoate it was used for further study No profound increase in the yield of methyl
benzoate was observed when the reaction temperature was increased from 80 to 100
degC therefore 80 degC was considered as an optimum reaction temperature for further
studies (Table 51 entries 4-5) When CO pressure was increased from 73 psi to 145
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
229
psi equivalent yield of the desired product was observed (Table 51 entry 6) Hence
the finalized reaction conditions were base Et3N temperature 80 degC solvent
alcohol (also as a nucleophile) time 3 h and 73 psi of CO pressure
Table 51 Effect of bases temperature and time on ImmPd-IL catalyzed
alkoxycarbonylation reactiona
Entry Base Temp
(degC)
CO Press
(psi)
Yield
()b
1 K2CO3 80 73 80
2 Cs2CO3 80 73 79
3 DBU 80 73 85
4 Et3N 80 73 96
5 Et3N 100 73 97
6 Et3N 100 145 98
a Reaction conditions
Iodobenzene (2 mmol) methyl alcohol (5 mL) ImmPd-IL (2
mol ) Et3N (3 mmol) 73 psi CO press Temp (80 degC) Time (3 h) b Yield based on GC analysis
These optimized reaction parameters were then successfully applied to variety
of aryl iodides with different alcohols (Table 52) Model reaction of iodobenzene
with methyl alcohol provided 94 isolated yield of methyl benzoate (Table 52 entry
1) Ethyl alcohol and benzyl alcohol also reacts efficiently with iodobenzene
providing 95 and 89 yield of ethyl benzoate and benzyl benzoate respectively
(Table 52 entries 1-3) The substituted iodobenzene derivatives 4-iodoaniline and 4-
iodophenol furnished 80 and 75 yield of the methyl 4-aminobenzoate and methyl
4-hydroxybenzoate respectively (Table 52 entries 4-5) 4-Acetyliodobenzene reacts
with ethanol and provided 81 yield of ethyl-4-acetylbenzoate (Table 52 entry 6)
Iodonaphthalene furnished 79 yield of methyl 2-naphthoate (Table 52 entry 7)
whereas 1-iodo-4-nitrobenzene efficiently reacts with methyl alcohol furnishing a
moderate yield (70) of methyl 4-nitrobenzoate (Table 52 entry 8)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
230
Table 52 ImmPd-IL catalyzed alkoxycarbonylation of aryl iodides with various
alcoholsa
Entry Aryl iodide Alcohol Product Yield
()b
1
MeOH
94
2
EtOH
95
3
89
4
MeOH
80
5
MeOH
75
6
EtOH
81
7
MeOH
79
8
MeOH
70
a Reaction conditions aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
Et3N (3 mmol) 73 psi CO press Temp (80 degC) Time (3 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
231
It is believed that the supported palladium metal leaches out from the solid
support and goes into the solution at higher temperature and the reaction was
catalyzed mainly by dissolved palladium species (Tambade et al 2008) Hence to
determine whether the reaction was catalyzed due to the ImmPd-IL complex or a
leached palladium metal that comes off the support at higher temperature during the
reaction a hot filtration test was performed (Lempers 1998 Zhao 2009)
Hot filtration experiment was performed for the alkoxycarbonylation of
iodobenzene with benzyl alcohol using ImmPd-IL catalyst Reaction was carried out
at 80 oC during reaction the ImmPd-IL complex catalyst was filtered off and the
filtrate without addition of catalyst was allowed to react further It was found that no
further reaction occurred after this hot filtration procedure hence this experimental
finding suggests there is no palladium leaching from the ImmPd-IL complex during
the progress of a reaction In addition to reconfirm this observation ICP-AES
analysis of the reaction mixture was carried out after 15 and 3 h which revealed a
below detectable level (below 001 ppm) of palladium in solution
It is also important to study the separation and recyclability of the catalyst
The ImmPd-IL catalyst was separated from the reaction mixture by a simple filtration
procedure and was found to be effective up to four consecutive recycles for
methoxycarbonylation reaction (Figure 52) No significant decrease in yield during
recycle study was observed
Figure 52 Recycle study of ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
232
523 PHENOXYCARBONYLATION REACTIONS
ImmPd-IL catalytic system was further explored for the phenoxycarbonylation of aryl
iodides with various phenols to yield corresponding phenyl esters and it was observed
that corresponding products were obtained in good to excellent yields (Scheme 526)
Scheme 526 Phenoxycarbonylation of aryl iodides with phenols using ImmPd-IL
For the optimization of reaction the influence of critical parameters such as
solvent base and CO pressure on the carbonylation of iodobenzene with phenol as a
nucleophile have been investigated (Table 53 entries 1-8)
Table 53 Effect of solvents and bases on ImmPd-IL catalyzed Phenoxycarbonylation
reactiona
Entry Solvent Base CO Press
(psi)
Yield
()b
1 DMF Et3N 145 56
2 14-Dioxane Et3N 145 62
3
Water Et3N 145 0
4 Toluene Et3N 145 90
5 Toluene DBU 145 80
6 Toluene K2CO3 145 66
7 Toluene Cs2CO3 145 72
8 Toluene Et3N 73 85
a Reaction conditions Iodobenzene (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
base (3 mmol) solvent (10 mL) 8 h at 100 degC b Yield based on GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
233
The role of various solvents such as NN-dimethyl formamide (DMF) (56)
14-dioxane (62) water (0) and toluene (90) was studied (Table 53 entries 1-
4) It was observed that the reaction was more favourable using toluene as a solvent
and provided 90 yield of phenyl benzoate (Table 54 entry 4) Various screened
organic and inorganic bases (K2CO3 Cs2CO3 DBU and Et3N) showed Et3N (90) to
be superior base at 100 degC (Table 53 entries 4-7) The initial reaction was carried out
at 145 psi CO pressure which provided 90 yield of phenyl benzoate a further
decrease in CO pressure up to 73 psi decreased the yield of the phenyl benzoate
(Table 53 entry 8) Hence the finalized reaction parameters were Et3N as a base in
toluene CO 73 psi at 100 degC for 8 h
These finalized reaction parameters were then applied for the
phenoxycarbonylation of different aryl halides and phenols having different electron-
donating or withdrawing groups (Table 54 entries 1-7) Iodobenzene reacts
efficiently with phenol within 8 h providing 89 isolated yield of phenyl benzoate
(Table 54 entry 1) Substituted phenols such as p-cresol p-methoxyphenol and p-
chlorophenol reacts with iodobenzene furnishing good to excellent yields of the
corresponding product (Table 54 entries 2-4) The substituted iodobenzene
derivative reacts with phenol and provided 86 yields of phenyl 4-methoxybenzoate
(Table 54 entry 5) 1-Iodo-4-nitrobenzene furnished moderate yield (59) of the
phenyl 4-nitrobenzoate (Table 54 entry 6) Reaction of 1-iodonaphthalene with
phenol provided 75 yield of phenyl 1-naphthoate (Table 54 entry 7)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
234
Table 54 ImmPd-IL catalyzed Phenoxycarbonylation of aryl iodides with various
phenolsa
Entry Aryl iodide Phenol Product Yield
()b
1
89
2
90
3
88
4
84
5
86
6
59
7
75
a Reaction conditions aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
235
524 AMINOCARBONYLATION REACTIONS
The scope of ImmPd-IL was further extended for aminocarbonylation of aryl iodides
with a range of aliphatic aromatic primary and secondary amines (Scheme 527)
Scheme 527 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with amines
The reaction of iodobenzene with aniline was selected as a model reaction for
optimization Various solvents such as DMF (80) water (70) anisole (60) and
toluene (92) were screened for the reaction (ionic liquid was insoluble in water as it
was immobilised on solid support) but toluene was found to be the best solvent
(Table 55 entries 1-4) Screening of a variety of bases showed Et3N (90) to be
superior at 100 degC (Table 55 entries 4-6) Further reaction was optimized with
respect to various reaction parameters including temperature time and CO pressure
and the best optimized reaction conditions were then applied for the
aminocarbonylation of a variety of iodoaryls and amines
Table 55 Effect of solvents and bases on ImmPd-IL catalyzed aminocarbonylation
reactiona
Entry Solvent Base Yield
()b
1 DMF Et3N 80
2 Water Et3N 70
3
Anisole Et3N 60
4 Toluene Et3N 92
5 Toluene Na2CO3 52
6 Toluene K2CO3 57
a Reaction conditions
Iodobenzene (1 mmol) aniline (2 mmol) ImmPd-IL (2 mol)
Et3N (3 mmol) Toluene (10 mL) 8 h at 100 degC 145 psi CO pressure b Yield based GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
236
The optimized reaction parameters were then applied for the
aminocarbonylation of substituted aryl halides and aromatic amines The model
reaction of iodobenzene with aniline provided 90 isolated yield of N-
phenylbenzamide under optimized reaction conditions (Table 56 entry 1) 4-
iodoanisole furnished 85 yield of 4-methoxy-N-phenylbenzamide (Table 56 entries
2) 4-methoxyaniline reacts with iodobenzene and provided 88 yield of N-(4-
methoxyphenyl)benzamide (Table 56 entry 3) 3-(Trifluoromethyl)aniline provided a
moderate yield of the expected product (Table 56 entry 4)
There after various primary aliphatic amines were screened for the
aminocarbonylation Cyclohexyl amine efficiently reacts with iodobenzene and 2-
iodonaphthalene and provided 92 and 80 yield of N-cyclohexylbenzamide and N-
cyclohexyl-1-naphthamide respectively (Table 56 entries 5-6) Reaction of
iodobenzene and 4-iodo acetophenone with tert-butyl amine furnished 92 and 89
yield of respective amide (Table 56 entry 7-8) Benzyl amine provided excellent
yields of N-benzylbenzamide (Table 56 entry 9) To our delight aromatic secondary
amine such as N-methyl aniline efficiently reacts with iodobenzene furnishing 91
yield of N-methyl-N-phenylbenzamide (Table 56 entry 10)
Table 56 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with various
aliphatic and aromatic primary amines and secondary aminesa
Entry Aryl iodide Amine Product Yield
()b
1
90
2
85
3
88
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
237
4
75
5
92
6
80
7
92
8
89
9
90
10
91
a Reaction conditions aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
238
53 CONCLUSION
The present study reports an efficient and common protocol for
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
by using a well-defined heterogeneous ImmPd-IL complex as a versatile
catalyst
The ease of preparation of the complex indefinite shelf life stability towards
air makes it an ideal complex for the above transformations
The reaction system was optimized with respect to various reaction parameters
and applied for carbonylation of a range of aryl iodides with different types of
alcohols phenols and amines furnishing good to excellent yields of the
corresponding products
The present protocol provided high yields of the desired products for all
carbonylation protocols
All the reactions were carried out under milder operating conditions
Catalytic system showed excellent activity and selectivity and effectively
recycled for four consecutive cycles
The leaching of the Pd metal was examined by hot filteration test and ICP-
AES analysis which revels no significant leaching of the palladium occurs
during the reaction
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
239
54 EXPERIMENTAL
541 Materials and Method N-methylimidazole (99+) and 3-trimethoxysilylpropyl
chloride (97+) were purchased from Aldrich PdCl2 was purchased from WAKO
Anhydrous redistilled 1-methylimidazole (99+) was purchased from Aldrich All
the dehydrated solvents were obtained from WAKO Aerosil 300 (300 m2g) was
obtained from Japan Aerosil Co and calcined at 573 K for 15 h in air and 30 min in
vacuum before use as a support The procedures for catalyst preparation were based
previous publication (Sasaki et al 2008) with some modifications Prepared catalyst
was characterized by using IR and elemental analysis and loading of the catalyst was
calculated by XRF measurements (SEA-2010 Seiko Electronic Industrial Co) The
XPS of ImmPd-IL was measured using a PHI5000 Versa Probe with monochromatic
focused (100 times 100 μm) Al Kα X-ray radiation (15 kV 30 mA) and dual beam
neutralization using a combination of argon ion gun and electron irradiation
The products are well-known in the literature and were compared with
authentic samples Progress of the reaction was monitored by gas chromatography
(GC) Gas chromatography analysis was carried out on Perkin-Elmer Clarus 400 GC
equipped flame ionization detector with a capillary column (Elite-1 30 m times 032 mm
times 025 μm) using the external standard method A GCMS-QP 2010 instrument (Rtx-
17 30 m times 25 mm id film thickness 025 μm df) (column flow 2 mL minminus1
80-240
degC at 10 degCmin rise) The 1H NMR spectra were recorded on Varian-300 MHz FT-
NMR spectrometer in CDCl3 using TMS as the internal standard The 13
C NMR
spectra were recorded with a JEOL FT-NMR model-AL300 (75 MHz) spectrometer
in CDCl3 Chemical shifts are reported in parts per million (δ) relative to
tetramethylsilane as the internal standard J (coupling constant) values were reported
in hertz (Hz) Proton splitting patterns are described as s (singlet) d (doublet) t
(triplet) and m (multiplet)
542 Preparation of immobilized palladium metal ion-containing ionic liquid
1-methyl-3-(3-trimethoxysilylpropyl) imidazolium chloride was synthesized by
mixing N-methylimidazole (0690 mol) and 3-trimethoxysilylpropyl chloride (0690
mol) in a dry 300 mL flask under a nitrogen atmosphere and refluxed for 48 h After
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
240
cooling to room temperature the resultant liquid was washed by dehydrated ethyl
acetate five times and dried at room temperature under reduced pressure for 48 h
The obtained compound was stored at 253 K under dry nitrogen Silica (Aerosil 300
surface area 300 m2g calcined at 573 K for 15 h in air) and 1-methyl-3-(3-
trimethoxysilylpropyl) imidazolium chloride (weight ratio 11) was dispersed in
dehydrated toluene and the mixture was refluxed for 48 h under nitrogen
After the reflux toluene was removed by filtration using glass filter and the
excess ionic liquid was removed by washing with dichloromethane several times The
resultant solid is denoted as Imm-IL In the next step Imm-IL was added to an
acetonitrile solution of PdCl2 and refluxed for 24 h Acetonitrile and excess of metal
chloride were removed by washing acetone using glass filter several times The metal
loading of ImmPd-IL was 34 wt as determined by XRF measurements (SEA-2010
Seiko Electronic Industrial Co)
543 General Experimental Procedure for Alkoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
and Et3N (3 mmol) were added The autoclave was closed purged three times with
carbon monoxide pressurized with 73 psi of CO and heated at 80 degC for 3 h After
completion of the reaction the reactor was cooled to room temperature and the
remaining CO gas was carefully vented and the reactor was opened The reactor
vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to remove any traces of
product and catalyst if present The catalyst was filtered and the reaction mixture was
evaporated under vacuum The residue obtained was purified by column
chromatography (silica gel 60-120 mesh petroleum etherethyl acetate 9505) to
afford the desired product
544 General Experimental Procedure for Recycling of ImmPd-IL
After completion of reaction the reaction mixture was cooled to room temperature
and the catalyst was collected by filtration The filtered catalyst was washed with
distilled water (3 times 5 mL) and methanol (3 times 5 mL) to remove all traces of product or
reactant present The filtered catalyst was then dried under reduced pressure The
dried catalyst was then used for the alkoxycarbonylation reaction of iodobenzene with
methanol for the recyclability experiment
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
241
545 XPS spectra of ImmPd-IL catalyst
The XPS spectra of ImmPd-IL shows that two peaks at 337 and 3424 eV for fresh
Imm-Pd are assigned as 3d52 and 3d32 for Pd2+
species respectively (Figure 53)
For the first recycle sample new peaks appear at 3342 and 3392 eV which are
assigned as 3d52 and 3d32 for Pd(0) species respectively indicating that the
reduction of the Pd species takes place during the catalytic reaction From the
spectrum of the fourth recycle sample it is obvious that the component of Pd2+
is
decreasing upon recycles although the component of Pd(0) remains constant
Figure 53 XPS of Pd 3d and Cl 2p for ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
242
546 General Experimental Procedure for Phenoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h After the completion of the reaction the reactor was cooled to room
temperature and the remaining CO gas was carefully vented and the reactor was
opened The reactor vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to
remove any traces of product and catalyst if present The catalyst was filtered and the
reaction mixture was evaporated under vacuum The residue obtained was purified by
column chromatography (silica gel 60-120 mesh petroleum etherethyl acetate
9505) to afford the desired product
547 General Experimental Procedure for Aminocarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol)
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h (the ensuing procedure is the same as that discussed above for the phenoxy
carbonylation reaction)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
243
55 SPECTRAL DATA
Methyl benzoate
GC-MS (EI 70 eV) mz () = 136 [M+] (35) 105 (100) 77 (55) 51 (20)
Ethyl benzoate
GC-MS (EI 70 eV) mz () = 150 [M+] (21) 122 (30) 105 (100) 77 (55)
Benzyl benzoate
1H NMR (300 MHz CDCl3) δ 804-808 (m 2H ArH) 731-752 (m 8H
ArH) 53 (s 2H CH2) 13
C NMR (75 MHz CDCl3) δ 16648 13619 13312
13025 12981 12870 12848 12834 12827 6677
Methyl 4-aminobenzoate
1H NMR (300 MHz CDCl3) δ 783 (d 2H J = 87 Hz ArH) 661 (d 2H J =
87 Hz ArH) 414 (br s 2H NH2) 383 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16724 15107 13151 11927 11368 5155
Methyl 4-hydroxybenzoate
1H NMR (300 MHz CDCl3) δ 794 (d 2H J = 87 Hz ArH) 722 (br s 1H
OH) 690 (d 2H J = 87 Hz ArH) 390 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16778 16055 13203 12201 11539 5223
Methyl 2-naphthoate
1H NMR (300 MHz CDCl3) δ 850 (s 1H ArH) 798-805 (m 2H ArH)
773 (t 2H J = 84 Hz ArH) 754-761 (m 2H ArH) 396 (s 3H OCH3) 13
C NMR
(75 MHz CDCl3) δ 16685 13634 13087 13082 13013 12938 12901 12778
12720 12632 12260 5235
Ethyl 4-acetylbenzoate
1H NMR (300 MHz CDCl3) δ 814-811 (m 2H ArH) 802-799 (m 2H
ArH) 441 (q 2H J = 69Hz CH2CH3) 265 (s 3H COCH3) 142 (t 3H J = 69Hz
CH2CH3) 13
C NMR (75 MHz CDCl3) δ 19766 16576 14012 13424 12977
12817 6147 2689 1427
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
244
Phenyl benzoate
1H NMR (300 MHz CDCl3) δ 825-822 (m 2H ArH) 768-863 (m 1H
ArH) 756-742 (m 4H ArH) 732-723 (m 3H ArH) 13
C NMR (75 MHz CDCl3)
δ 16590 15103 13365 13023 12964 12956 12864 12596 1217 GC-MS (EI
70 eV) mz () = 198 [M+] (9) 105 (100) 77 (40) 51 (9)
phenyl 4-nitrobenzoate
1H NMR (300 MHz CDCl3) δ = 837 (s 4H ArH) 723-748 (m 5H ArH)
13C NMR (75 MHz CDCl3) δ = 16347 15110 15072 13517 13144 12984
12657 12388 12157 GC-MS (EI 70 eV) mz () = 243 [M+] (15) 150 (100) 77
(10)
phenyl 4-methoxybenzoate
1H NMR (300 MHz CDCl3) δ = 814-816 (d 2H J = 87Hz ArH) 720-741
(m 5H ArH) 696-698 (d 2H J = 87 Hz ArH) 386 (s 3H OCH3) GC-MS (EI
70 eV) mz () = 228 [M+] (5) 135 (100) 107 (9) 77 (20)
phenyl-1-naphthoate
1H NMR (300 MHz CDCl3) δ = 904 (d 1H ArH) 845 (d1H ArH) 804
(d 1H ArH) 788 (d 1H ArH) 742-763 (m 5H ArH) 726-728 (m 3H ArH)
13C NMR (70 MHz CDCl3) δ = 16594 15118 13440 13408 13182 13134
12968 12883 12850 12829 12650 12605 12590 12465 12203
N-phenylbenzamide
1H NMR (300 MHz CDCl3) δ 798 (br s 1H NH) 787-883 (m 2H ArH)
763 (d 2H J = 76 Hz ArH) 732-753 (m 5H ArH) 716 (t 1H J = 73 ArH) 13
C
NMR (75 MHz CDCl3) δ 16590 13798 13502 13186 12911 12880 12709
12461 12032 ppm GC-MS mz () = 197 [M+] (42) 105 (100) 77 (54)
4-acetyl-N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 806 (d 2H J = 84Hz ArH) 777 (d 2H J
= 84Hz ArH) 601 (br s 1H NH) 393 (s 3H CH3) 148 (s 9H) 13
C NMR (75
MHz CDCl3) δ 16640 16605 13987 13234 12979 12682 5239 5195 2883
ppm GC-MS (EI 70 eV) mz () = 219 [M+] (20) 186 (22) 148 (100) 130 (30) 76
(20)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
227
52 RESULTS AND DISCUSSION
Considering the objective of the development of efficient phosphine free
heterogeneous and recyclable protocol immobilized palladium metal ion containing
ionic liquid (ImmPd-IL) was used as a common catalyst for alkoxycarbonylation
phenoxycarbonylation and aminocarbonylation reactions (Scheme 523) The
methodology offers synthesis of various carbonyl compounds including aliphatic
esters aromatic esters and amides from corresponding alcohol phenol and amines
The protocol is advantageous due to the ease in handling of the catalyst and simple
workup procedure and effective catalyst recyclability
Scheme 523 ImmPd-IL catalyzed different carbonylation reactions
521 Preparation of immobilized palladium metal ion containing ionic liquid
(ImmPd-IL) catalyst
Preparation of immobilized palladium metal ion-containing ionic liquid catalyst
(ImmPd-IL) is a two step process (Scheme 524) The first step involves the anchoring
of ionic liquid on to a silica support which gives immobilized ionic liquid (Imm-IL)
In a second step the synthesized Imm-IL is loaded with palladium metal ion (PdCl2)
which results immobilized palladium ion-containing ionic liquid (ImmPd-IL)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
228
Scheme 524 Preparation of immobilized ImmPd-IL
522 ALKOXYCARBONYLATION REACTIONS
Initially alkoxycarbonylation reaction of aryl iodide with aliphatic alcohols was
studied (Scheme 525)
Scheme 525 ImmPd-IL catalyzed alkoxycarbonylation of aryl iodides with alcohols
The effect of various reaction parameters like base temperature time and CO
pressure using ImmPd-IL as a catalyst was studied (Table 51) The reaction of
iodobenzene with methyl alcohol in presence of CO was chosen as model reaction for
the optimization To study the role of base the reaction was carried out using various
inorganic bases like K2CO3 (80) Cs2CO3 (79) and organic bases like DBU (85)
Et3N (96) (Table 51 entries 1-4) As Et3N provided maximum yield of the methyl
benzoate it was used for further study No profound increase in the yield of methyl
benzoate was observed when the reaction temperature was increased from 80 to 100
degC therefore 80 degC was considered as an optimum reaction temperature for further
studies (Table 51 entries 4-5) When CO pressure was increased from 73 psi to 145
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
229
psi equivalent yield of the desired product was observed (Table 51 entry 6) Hence
the finalized reaction conditions were base Et3N temperature 80 degC solvent
alcohol (also as a nucleophile) time 3 h and 73 psi of CO pressure
Table 51 Effect of bases temperature and time on ImmPd-IL catalyzed
alkoxycarbonylation reactiona
Entry Base Temp
(degC)
CO Press
(psi)
Yield
()b
1 K2CO3 80 73 80
2 Cs2CO3 80 73 79
3 DBU 80 73 85
4 Et3N 80 73 96
5 Et3N 100 73 97
6 Et3N 100 145 98
a Reaction conditions
Iodobenzene (2 mmol) methyl alcohol (5 mL) ImmPd-IL (2
mol ) Et3N (3 mmol) 73 psi CO press Temp (80 degC) Time (3 h) b Yield based on GC analysis
These optimized reaction parameters were then successfully applied to variety
of aryl iodides with different alcohols (Table 52) Model reaction of iodobenzene
with methyl alcohol provided 94 isolated yield of methyl benzoate (Table 52 entry
1) Ethyl alcohol and benzyl alcohol also reacts efficiently with iodobenzene
providing 95 and 89 yield of ethyl benzoate and benzyl benzoate respectively
(Table 52 entries 1-3) The substituted iodobenzene derivatives 4-iodoaniline and 4-
iodophenol furnished 80 and 75 yield of the methyl 4-aminobenzoate and methyl
4-hydroxybenzoate respectively (Table 52 entries 4-5) 4-Acetyliodobenzene reacts
with ethanol and provided 81 yield of ethyl-4-acetylbenzoate (Table 52 entry 6)
Iodonaphthalene furnished 79 yield of methyl 2-naphthoate (Table 52 entry 7)
whereas 1-iodo-4-nitrobenzene efficiently reacts with methyl alcohol furnishing a
moderate yield (70) of methyl 4-nitrobenzoate (Table 52 entry 8)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
230
Table 52 ImmPd-IL catalyzed alkoxycarbonylation of aryl iodides with various
alcoholsa
Entry Aryl iodide Alcohol Product Yield
()b
1
MeOH
94
2
EtOH
95
3
89
4
MeOH
80
5
MeOH
75
6
EtOH
81
7
MeOH
79
8
MeOH
70
a Reaction conditions aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
Et3N (3 mmol) 73 psi CO press Temp (80 degC) Time (3 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
231
It is believed that the supported palladium metal leaches out from the solid
support and goes into the solution at higher temperature and the reaction was
catalyzed mainly by dissolved palladium species (Tambade et al 2008) Hence to
determine whether the reaction was catalyzed due to the ImmPd-IL complex or a
leached palladium metal that comes off the support at higher temperature during the
reaction a hot filtration test was performed (Lempers 1998 Zhao 2009)
Hot filtration experiment was performed for the alkoxycarbonylation of
iodobenzene with benzyl alcohol using ImmPd-IL catalyst Reaction was carried out
at 80 oC during reaction the ImmPd-IL complex catalyst was filtered off and the
filtrate without addition of catalyst was allowed to react further It was found that no
further reaction occurred after this hot filtration procedure hence this experimental
finding suggests there is no palladium leaching from the ImmPd-IL complex during
the progress of a reaction In addition to reconfirm this observation ICP-AES
analysis of the reaction mixture was carried out after 15 and 3 h which revealed a
below detectable level (below 001 ppm) of palladium in solution
It is also important to study the separation and recyclability of the catalyst
The ImmPd-IL catalyst was separated from the reaction mixture by a simple filtration
procedure and was found to be effective up to four consecutive recycles for
methoxycarbonylation reaction (Figure 52) No significant decrease in yield during
recycle study was observed
Figure 52 Recycle study of ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
232
523 PHENOXYCARBONYLATION REACTIONS
ImmPd-IL catalytic system was further explored for the phenoxycarbonylation of aryl
iodides with various phenols to yield corresponding phenyl esters and it was observed
that corresponding products were obtained in good to excellent yields (Scheme 526)
Scheme 526 Phenoxycarbonylation of aryl iodides with phenols using ImmPd-IL
For the optimization of reaction the influence of critical parameters such as
solvent base and CO pressure on the carbonylation of iodobenzene with phenol as a
nucleophile have been investigated (Table 53 entries 1-8)
Table 53 Effect of solvents and bases on ImmPd-IL catalyzed Phenoxycarbonylation
reactiona
Entry Solvent Base CO Press
(psi)
Yield
()b
1 DMF Et3N 145 56
2 14-Dioxane Et3N 145 62
3
Water Et3N 145 0
4 Toluene Et3N 145 90
5 Toluene DBU 145 80
6 Toluene K2CO3 145 66
7 Toluene Cs2CO3 145 72
8 Toluene Et3N 73 85
a Reaction conditions Iodobenzene (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
base (3 mmol) solvent (10 mL) 8 h at 100 degC b Yield based on GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
233
The role of various solvents such as NN-dimethyl formamide (DMF) (56)
14-dioxane (62) water (0) and toluene (90) was studied (Table 53 entries 1-
4) It was observed that the reaction was more favourable using toluene as a solvent
and provided 90 yield of phenyl benzoate (Table 54 entry 4) Various screened
organic and inorganic bases (K2CO3 Cs2CO3 DBU and Et3N) showed Et3N (90) to
be superior base at 100 degC (Table 53 entries 4-7) The initial reaction was carried out
at 145 psi CO pressure which provided 90 yield of phenyl benzoate a further
decrease in CO pressure up to 73 psi decreased the yield of the phenyl benzoate
(Table 53 entry 8) Hence the finalized reaction parameters were Et3N as a base in
toluene CO 73 psi at 100 degC for 8 h
These finalized reaction parameters were then applied for the
phenoxycarbonylation of different aryl halides and phenols having different electron-
donating or withdrawing groups (Table 54 entries 1-7) Iodobenzene reacts
efficiently with phenol within 8 h providing 89 isolated yield of phenyl benzoate
(Table 54 entry 1) Substituted phenols such as p-cresol p-methoxyphenol and p-
chlorophenol reacts with iodobenzene furnishing good to excellent yields of the
corresponding product (Table 54 entries 2-4) The substituted iodobenzene
derivative reacts with phenol and provided 86 yields of phenyl 4-methoxybenzoate
(Table 54 entry 5) 1-Iodo-4-nitrobenzene furnished moderate yield (59) of the
phenyl 4-nitrobenzoate (Table 54 entry 6) Reaction of 1-iodonaphthalene with
phenol provided 75 yield of phenyl 1-naphthoate (Table 54 entry 7)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
234
Table 54 ImmPd-IL catalyzed Phenoxycarbonylation of aryl iodides with various
phenolsa
Entry Aryl iodide Phenol Product Yield
()b
1
89
2
90
3
88
4
84
5
86
6
59
7
75
a Reaction conditions aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
235
524 AMINOCARBONYLATION REACTIONS
The scope of ImmPd-IL was further extended for aminocarbonylation of aryl iodides
with a range of aliphatic aromatic primary and secondary amines (Scheme 527)
Scheme 527 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with amines
The reaction of iodobenzene with aniline was selected as a model reaction for
optimization Various solvents such as DMF (80) water (70) anisole (60) and
toluene (92) were screened for the reaction (ionic liquid was insoluble in water as it
was immobilised on solid support) but toluene was found to be the best solvent
(Table 55 entries 1-4) Screening of a variety of bases showed Et3N (90) to be
superior at 100 degC (Table 55 entries 4-6) Further reaction was optimized with
respect to various reaction parameters including temperature time and CO pressure
and the best optimized reaction conditions were then applied for the
aminocarbonylation of a variety of iodoaryls and amines
Table 55 Effect of solvents and bases on ImmPd-IL catalyzed aminocarbonylation
reactiona
Entry Solvent Base Yield
()b
1 DMF Et3N 80
2 Water Et3N 70
3
Anisole Et3N 60
4 Toluene Et3N 92
5 Toluene Na2CO3 52
6 Toluene K2CO3 57
a Reaction conditions
Iodobenzene (1 mmol) aniline (2 mmol) ImmPd-IL (2 mol)
Et3N (3 mmol) Toluene (10 mL) 8 h at 100 degC 145 psi CO pressure b Yield based GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
236
The optimized reaction parameters were then applied for the
aminocarbonylation of substituted aryl halides and aromatic amines The model
reaction of iodobenzene with aniline provided 90 isolated yield of N-
phenylbenzamide under optimized reaction conditions (Table 56 entry 1) 4-
iodoanisole furnished 85 yield of 4-methoxy-N-phenylbenzamide (Table 56 entries
2) 4-methoxyaniline reacts with iodobenzene and provided 88 yield of N-(4-
methoxyphenyl)benzamide (Table 56 entry 3) 3-(Trifluoromethyl)aniline provided a
moderate yield of the expected product (Table 56 entry 4)
There after various primary aliphatic amines were screened for the
aminocarbonylation Cyclohexyl amine efficiently reacts with iodobenzene and 2-
iodonaphthalene and provided 92 and 80 yield of N-cyclohexylbenzamide and N-
cyclohexyl-1-naphthamide respectively (Table 56 entries 5-6) Reaction of
iodobenzene and 4-iodo acetophenone with tert-butyl amine furnished 92 and 89
yield of respective amide (Table 56 entry 7-8) Benzyl amine provided excellent
yields of N-benzylbenzamide (Table 56 entry 9) To our delight aromatic secondary
amine such as N-methyl aniline efficiently reacts with iodobenzene furnishing 91
yield of N-methyl-N-phenylbenzamide (Table 56 entry 10)
Table 56 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with various
aliphatic and aromatic primary amines and secondary aminesa
Entry Aryl iodide Amine Product Yield
()b
1
90
2
85
3
88
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
237
4
75
5
92
6
80
7
92
8
89
9
90
10
91
a Reaction conditions aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
238
53 CONCLUSION
The present study reports an efficient and common protocol for
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
by using a well-defined heterogeneous ImmPd-IL complex as a versatile
catalyst
The ease of preparation of the complex indefinite shelf life stability towards
air makes it an ideal complex for the above transformations
The reaction system was optimized with respect to various reaction parameters
and applied for carbonylation of a range of aryl iodides with different types of
alcohols phenols and amines furnishing good to excellent yields of the
corresponding products
The present protocol provided high yields of the desired products for all
carbonylation protocols
All the reactions were carried out under milder operating conditions
Catalytic system showed excellent activity and selectivity and effectively
recycled for four consecutive cycles
The leaching of the Pd metal was examined by hot filteration test and ICP-
AES analysis which revels no significant leaching of the palladium occurs
during the reaction
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
239
54 EXPERIMENTAL
541 Materials and Method N-methylimidazole (99+) and 3-trimethoxysilylpropyl
chloride (97+) were purchased from Aldrich PdCl2 was purchased from WAKO
Anhydrous redistilled 1-methylimidazole (99+) was purchased from Aldrich All
the dehydrated solvents were obtained from WAKO Aerosil 300 (300 m2g) was
obtained from Japan Aerosil Co and calcined at 573 K for 15 h in air and 30 min in
vacuum before use as a support The procedures for catalyst preparation were based
previous publication (Sasaki et al 2008) with some modifications Prepared catalyst
was characterized by using IR and elemental analysis and loading of the catalyst was
calculated by XRF measurements (SEA-2010 Seiko Electronic Industrial Co) The
XPS of ImmPd-IL was measured using a PHI5000 Versa Probe with monochromatic
focused (100 times 100 μm) Al Kα X-ray radiation (15 kV 30 mA) and dual beam
neutralization using a combination of argon ion gun and electron irradiation
The products are well-known in the literature and were compared with
authentic samples Progress of the reaction was monitored by gas chromatography
(GC) Gas chromatography analysis was carried out on Perkin-Elmer Clarus 400 GC
equipped flame ionization detector with a capillary column (Elite-1 30 m times 032 mm
times 025 μm) using the external standard method A GCMS-QP 2010 instrument (Rtx-
17 30 m times 25 mm id film thickness 025 μm df) (column flow 2 mL minminus1
80-240
degC at 10 degCmin rise) The 1H NMR spectra were recorded on Varian-300 MHz FT-
NMR spectrometer in CDCl3 using TMS as the internal standard The 13
C NMR
spectra were recorded with a JEOL FT-NMR model-AL300 (75 MHz) spectrometer
in CDCl3 Chemical shifts are reported in parts per million (δ) relative to
tetramethylsilane as the internal standard J (coupling constant) values were reported
in hertz (Hz) Proton splitting patterns are described as s (singlet) d (doublet) t
(triplet) and m (multiplet)
542 Preparation of immobilized palladium metal ion-containing ionic liquid
1-methyl-3-(3-trimethoxysilylpropyl) imidazolium chloride was synthesized by
mixing N-methylimidazole (0690 mol) and 3-trimethoxysilylpropyl chloride (0690
mol) in a dry 300 mL flask under a nitrogen atmosphere and refluxed for 48 h After
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
240
cooling to room temperature the resultant liquid was washed by dehydrated ethyl
acetate five times and dried at room temperature under reduced pressure for 48 h
The obtained compound was stored at 253 K under dry nitrogen Silica (Aerosil 300
surface area 300 m2g calcined at 573 K for 15 h in air) and 1-methyl-3-(3-
trimethoxysilylpropyl) imidazolium chloride (weight ratio 11) was dispersed in
dehydrated toluene and the mixture was refluxed for 48 h under nitrogen
After the reflux toluene was removed by filtration using glass filter and the
excess ionic liquid was removed by washing with dichloromethane several times The
resultant solid is denoted as Imm-IL In the next step Imm-IL was added to an
acetonitrile solution of PdCl2 and refluxed for 24 h Acetonitrile and excess of metal
chloride were removed by washing acetone using glass filter several times The metal
loading of ImmPd-IL was 34 wt as determined by XRF measurements (SEA-2010
Seiko Electronic Industrial Co)
543 General Experimental Procedure for Alkoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
and Et3N (3 mmol) were added The autoclave was closed purged three times with
carbon monoxide pressurized with 73 psi of CO and heated at 80 degC for 3 h After
completion of the reaction the reactor was cooled to room temperature and the
remaining CO gas was carefully vented and the reactor was opened The reactor
vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to remove any traces of
product and catalyst if present The catalyst was filtered and the reaction mixture was
evaporated under vacuum The residue obtained was purified by column
chromatography (silica gel 60-120 mesh petroleum etherethyl acetate 9505) to
afford the desired product
544 General Experimental Procedure for Recycling of ImmPd-IL
After completion of reaction the reaction mixture was cooled to room temperature
and the catalyst was collected by filtration The filtered catalyst was washed with
distilled water (3 times 5 mL) and methanol (3 times 5 mL) to remove all traces of product or
reactant present The filtered catalyst was then dried under reduced pressure The
dried catalyst was then used for the alkoxycarbonylation reaction of iodobenzene with
methanol for the recyclability experiment
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
241
545 XPS spectra of ImmPd-IL catalyst
The XPS spectra of ImmPd-IL shows that two peaks at 337 and 3424 eV for fresh
Imm-Pd are assigned as 3d52 and 3d32 for Pd2+
species respectively (Figure 53)
For the first recycle sample new peaks appear at 3342 and 3392 eV which are
assigned as 3d52 and 3d32 for Pd(0) species respectively indicating that the
reduction of the Pd species takes place during the catalytic reaction From the
spectrum of the fourth recycle sample it is obvious that the component of Pd2+
is
decreasing upon recycles although the component of Pd(0) remains constant
Figure 53 XPS of Pd 3d and Cl 2p for ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
242
546 General Experimental Procedure for Phenoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h After the completion of the reaction the reactor was cooled to room
temperature and the remaining CO gas was carefully vented and the reactor was
opened The reactor vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to
remove any traces of product and catalyst if present The catalyst was filtered and the
reaction mixture was evaporated under vacuum The residue obtained was purified by
column chromatography (silica gel 60-120 mesh petroleum etherethyl acetate
9505) to afford the desired product
547 General Experimental Procedure for Aminocarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol)
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h (the ensuing procedure is the same as that discussed above for the phenoxy
carbonylation reaction)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
243
55 SPECTRAL DATA
Methyl benzoate
GC-MS (EI 70 eV) mz () = 136 [M+] (35) 105 (100) 77 (55) 51 (20)
Ethyl benzoate
GC-MS (EI 70 eV) mz () = 150 [M+] (21) 122 (30) 105 (100) 77 (55)
Benzyl benzoate
1H NMR (300 MHz CDCl3) δ 804-808 (m 2H ArH) 731-752 (m 8H
ArH) 53 (s 2H CH2) 13
C NMR (75 MHz CDCl3) δ 16648 13619 13312
13025 12981 12870 12848 12834 12827 6677
Methyl 4-aminobenzoate
1H NMR (300 MHz CDCl3) δ 783 (d 2H J = 87 Hz ArH) 661 (d 2H J =
87 Hz ArH) 414 (br s 2H NH2) 383 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16724 15107 13151 11927 11368 5155
Methyl 4-hydroxybenzoate
1H NMR (300 MHz CDCl3) δ 794 (d 2H J = 87 Hz ArH) 722 (br s 1H
OH) 690 (d 2H J = 87 Hz ArH) 390 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16778 16055 13203 12201 11539 5223
Methyl 2-naphthoate
1H NMR (300 MHz CDCl3) δ 850 (s 1H ArH) 798-805 (m 2H ArH)
773 (t 2H J = 84 Hz ArH) 754-761 (m 2H ArH) 396 (s 3H OCH3) 13
C NMR
(75 MHz CDCl3) δ 16685 13634 13087 13082 13013 12938 12901 12778
12720 12632 12260 5235
Ethyl 4-acetylbenzoate
1H NMR (300 MHz CDCl3) δ 814-811 (m 2H ArH) 802-799 (m 2H
ArH) 441 (q 2H J = 69Hz CH2CH3) 265 (s 3H COCH3) 142 (t 3H J = 69Hz
CH2CH3) 13
C NMR (75 MHz CDCl3) δ 19766 16576 14012 13424 12977
12817 6147 2689 1427
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
244
Phenyl benzoate
1H NMR (300 MHz CDCl3) δ 825-822 (m 2H ArH) 768-863 (m 1H
ArH) 756-742 (m 4H ArH) 732-723 (m 3H ArH) 13
C NMR (75 MHz CDCl3)
δ 16590 15103 13365 13023 12964 12956 12864 12596 1217 GC-MS (EI
70 eV) mz () = 198 [M+] (9) 105 (100) 77 (40) 51 (9)
phenyl 4-nitrobenzoate
1H NMR (300 MHz CDCl3) δ = 837 (s 4H ArH) 723-748 (m 5H ArH)
13C NMR (75 MHz CDCl3) δ = 16347 15110 15072 13517 13144 12984
12657 12388 12157 GC-MS (EI 70 eV) mz () = 243 [M+] (15) 150 (100) 77
(10)
phenyl 4-methoxybenzoate
1H NMR (300 MHz CDCl3) δ = 814-816 (d 2H J = 87Hz ArH) 720-741
(m 5H ArH) 696-698 (d 2H J = 87 Hz ArH) 386 (s 3H OCH3) GC-MS (EI
70 eV) mz () = 228 [M+] (5) 135 (100) 107 (9) 77 (20)
phenyl-1-naphthoate
1H NMR (300 MHz CDCl3) δ = 904 (d 1H ArH) 845 (d1H ArH) 804
(d 1H ArH) 788 (d 1H ArH) 742-763 (m 5H ArH) 726-728 (m 3H ArH)
13C NMR (70 MHz CDCl3) δ = 16594 15118 13440 13408 13182 13134
12968 12883 12850 12829 12650 12605 12590 12465 12203
N-phenylbenzamide
1H NMR (300 MHz CDCl3) δ 798 (br s 1H NH) 787-883 (m 2H ArH)
763 (d 2H J = 76 Hz ArH) 732-753 (m 5H ArH) 716 (t 1H J = 73 ArH) 13
C
NMR (75 MHz CDCl3) δ 16590 13798 13502 13186 12911 12880 12709
12461 12032 ppm GC-MS mz () = 197 [M+] (42) 105 (100) 77 (54)
4-acetyl-N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 806 (d 2H J = 84Hz ArH) 777 (d 2H J
= 84Hz ArH) 601 (br s 1H NH) 393 (s 3H CH3) 148 (s 9H) 13
C NMR (75
MHz CDCl3) δ 16640 16605 13987 13234 12979 12682 5239 5195 2883
ppm GC-MS (EI 70 eV) mz () = 219 [M+] (20) 186 (22) 148 (100) 130 (30) 76
(20)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
228
Scheme 524 Preparation of immobilized ImmPd-IL
522 ALKOXYCARBONYLATION REACTIONS
Initially alkoxycarbonylation reaction of aryl iodide with aliphatic alcohols was
studied (Scheme 525)
Scheme 525 ImmPd-IL catalyzed alkoxycarbonylation of aryl iodides with alcohols
The effect of various reaction parameters like base temperature time and CO
pressure using ImmPd-IL as a catalyst was studied (Table 51) The reaction of
iodobenzene with methyl alcohol in presence of CO was chosen as model reaction for
the optimization To study the role of base the reaction was carried out using various
inorganic bases like K2CO3 (80) Cs2CO3 (79) and organic bases like DBU (85)
Et3N (96) (Table 51 entries 1-4) As Et3N provided maximum yield of the methyl
benzoate it was used for further study No profound increase in the yield of methyl
benzoate was observed when the reaction temperature was increased from 80 to 100
degC therefore 80 degC was considered as an optimum reaction temperature for further
studies (Table 51 entries 4-5) When CO pressure was increased from 73 psi to 145
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
229
psi equivalent yield of the desired product was observed (Table 51 entry 6) Hence
the finalized reaction conditions were base Et3N temperature 80 degC solvent
alcohol (also as a nucleophile) time 3 h and 73 psi of CO pressure
Table 51 Effect of bases temperature and time on ImmPd-IL catalyzed
alkoxycarbonylation reactiona
Entry Base Temp
(degC)
CO Press
(psi)
Yield
()b
1 K2CO3 80 73 80
2 Cs2CO3 80 73 79
3 DBU 80 73 85
4 Et3N 80 73 96
5 Et3N 100 73 97
6 Et3N 100 145 98
a Reaction conditions
Iodobenzene (2 mmol) methyl alcohol (5 mL) ImmPd-IL (2
mol ) Et3N (3 mmol) 73 psi CO press Temp (80 degC) Time (3 h) b Yield based on GC analysis
These optimized reaction parameters were then successfully applied to variety
of aryl iodides with different alcohols (Table 52) Model reaction of iodobenzene
with methyl alcohol provided 94 isolated yield of methyl benzoate (Table 52 entry
1) Ethyl alcohol and benzyl alcohol also reacts efficiently with iodobenzene
providing 95 and 89 yield of ethyl benzoate and benzyl benzoate respectively
(Table 52 entries 1-3) The substituted iodobenzene derivatives 4-iodoaniline and 4-
iodophenol furnished 80 and 75 yield of the methyl 4-aminobenzoate and methyl
4-hydroxybenzoate respectively (Table 52 entries 4-5) 4-Acetyliodobenzene reacts
with ethanol and provided 81 yield of ethyl-4-acetylbenzoate (Table 52 entry 6)
Iodonaphthalene furnished 79 yield of methyl 2-naphthoate (Table 52 entry 7)
whereas 1-iodo-4-nitrobenzene efficiently reacts with methyl alcohol furnishing a
moderate yield (70) of methyl 4-nitrobenzoate (Table 52 entry 8)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
230
Table 52 ImmPd-IL catalyzed alkoxycarbonylation of aryl iodides with various
alcoholsa
Entry Aryl iodide Alcohol Product Yield
()b
1
MeOH
94
2
EtOH
95
3
89
4
MeOH
80
5
MeOH
75
6
EtOH
81
7
MeOH
79
8
MeOH
70
a Reaction conditions aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
Et3N (3 mmol) 73 psi CO press Temp (80 degC) Time (3 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
231
It is believed that the supported palladium metal leaches out from the solid
support and goes into the solution at higher temperature and the reaction was
catalyzed mainly by dissolved palladium species (Tambade et al 2008) Hence to
determine whether the reaction was catalyzed due to the ImmPd-IL complex or a
leached palladium metal that comes off the support at higher temperature during the
reaction a hot filtration test was performed (Lempers 1998 Zhao 2009)
Hot filtration experiment was performed for the alkoxycarbonylation of
iodobenzene with benzyl alcohol using ImmPd-IL catalyst Reaction was carried out
at 80 oC during reaction the ImmPd-IL complex catalyst was filtered off and the
filtrate without addition of catalyst was allowed to react further It was found that no
further reaction occurred after this hot filtration procedure hence this experimental
finding suggests there is no palladium leaching from the ImmPd-IL complex during
the progress of a reaction In addition to reconfirm this observation ICP-AES
analysis of the reaction mixture was carried out after 15 and 3 h which revealed a
below detectable level (below 001 ppm) of palladium in solution
It is also important to study the separation and recyclability of the catalyst
The ImmPd-IL catalyst was separated from the reaction mixture by a simple filtration
procedure and was found to be effective up to four consecutive recycles for
methoxycarbonylation reaction (Figure 52) No significant decrease in yield during
recycle study was observed
Figure 52 Recycle study of ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
232
523 PHENOXYCARBONYLATION REACTIONS
ImmPd-IL catalytic system was further explored for the phenoxycarbonylation of aryl
iodides with various phenols to yield corresponding phenyl esters and it was observed
that corresponding products were obtained in good to excellent yields (Scheme 526)
Scheme 526 Phenoxycarbonylation of aryl iodides with phenols using ImmPd-IL
For the optimization of reaction the influence of critical parameters such as
solvent base and CO pressure on the carbonylation of iodobenzene with phenol as a
nucleophile have been investigated (Table 53 entries 1-8)
Table 53 Effect of solvents and bases on ImmPd-IL catalyzed Phenoxycarbonylation
reactiona
Entry Solvent Base CO Press
(psi)
Yield
()b
1 DMF Et3N 145 56
2 14-Dioxane Et3N 145 62
3
Water Et3N 145 0
4 Toluene Et3N 145 90
5 Toluene DBU 145 80
6 Toluene K2CO3 145 66
7 Toluene Cs2CO3 145 72
8 Toluene Et3N 73 85
a Reaction conditions Iodobenzene (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
base (3 mmol) solvent (10 mL) 8 h at 100 degC b Yield based on GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
233
The role of various solvents such as NN-dimethyl formamide (DMF) (56)
14-dioxane (62) water (0) and toluene (90) was studied (Table 53 entries 1-
4) It was observed that the reaction was more favourable using toluene as a solvent
and provided 90 yield of phenyl benzoate (Table 54 entry 4) Various screened
organic and inorganic bases (K2CO3 Cs2CO3 DBU and Et3N) showed Et3N (90) to
be superior base at 100 degC (Table 53 entries 4-7) The initial reaction was carried out
at 145 psi CO pressure which provided 90 yield of phenyl benzoate a further
decrease in CO pressure up to 73 psi decreased the yield of the phenyl benzoate
(Table 53 entry 8) Hence the finalized reaction parameters were Et3N as a base in
toluene CO 73 psi at 100 degC for 8 h
These finalized reaction parameters were then applied for the
phenoxycarbonylation of different aryl halides and phenols having different electron-
donating or withdrawing groups (Table 54 entries 1-7) Iodobenzene reacts
efficiently with phenol within 8 h providing 89 isolated yield of phenyl benzoate
(Table 54 entry 1) Substituted phenols such as p-cresol p-methoxyphenol and p-
chlorophenol reacts with iodobenzene furnishing good to excellent yields of the
corresponding product (Table 54 entries 2-4) The substituted iodobenzene
derivative reacts with phenol and provided 86 yields of phenyl 4-methoxybenzoate
(Table 54 entry 5) 1-Iodo-4-nitrobenzene furnished moderate yield (59) of the
phenyl 4-nitrobenzoate (Table 54 entry 6) Reaction of 1-iodonaphthalene with
phenol provided 75 yield of phenyl 1-naphthoate (Table 54 entry 7)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
234
Table 54 ImmPd-IL catalyzed Phenoxycarbonylation of aryl iodides with various
phenolsa
Entry Aryl iodide Phenol Product Yield
()b
1
89
2
90
3
88
4
84
5
86
6
59
7
75
a Reaction conditions aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
235
524 AMINOCARBONYLATION REACTIONS
The scope of ImmPd-IL was further extended for aminocarbonylation of aryl iodides
with a range of aliphatic aromatic primary and secondary amines (Scheme 527)
Scheme 527 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with amines
The reaction of iodobenzene with aniline was selected as a model reaction for
optimization Various solvents such as DMF (80) water (70) anisole (60) and
toluene (92) were screened for the reaction (ionic liquid was insoluble in water as it
was immobilised on solid support) but toluene was found to be the best solvent
(Table 55 entries 1-4) Screening of a variety of bases showed Et3N (90) to be
superior at 100 degC (Table 55 entries 4-6) Further reaction was optimized with
respect to various reaction parameters including temperature time and CO pressure
and the best optimized reaction conditions were then applied for the
aminocarbonylation of a variety of iodoaryls and amines
Table 55 Effect of solvents and bases on ImmPd-IL catalyzed aminocarbonylation
reactiona
Entry Solvent Base Yield
()b
1 DMF Et3N 80
2 Water Et3N 70
3
Anisole Et3N 60
4 Toluene Et3N 92
5 Toluene Na2CO3 52
6 Toluene K2CO3 57
a Reaction conditions
Iodobenzene (1 mmol) aniline (2 mmol) ImmPd-IL (2 mol)
Et3N (3 mmol) Toluene (10 mL) 8 h at 100 degC 145 psi CO pressure b Yield based GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
236
The optimized reaction parameters were then applied for the
aminocarbonylation of substituted aryl halides and aromatic amines The model
reaction of iodobenzene with aniline provided 90 isolated yield of N-
phenylbenzamide under optimized reaction conditions (Table 56 entry 1) 4-
iodoanisole furnished 85 yield of 4-methoxy-N-phenylbenzamide (Table 56 entries
2) 4-methoxyaniline reacts with iodobenzene and provided 88 yield of N-(4-
methoxyphenyl)benzamide (Table 56 entry 3) 3-(Trifluoromethyl)aniline provided a
moderate yield of the expected product (Table 56 entry 4)
There after various primary aliphatic amines were screened for the
aminocarbonylation Cyclohexyl amine efficiently reacts with iodobenzene and 2-
iodonaphthalene and provided 92 and 80 yield of N-cyclohexylbenzamide and N-
cyclohexyl-1-naphthamide respectively (Table 56 entries 5-6) Reaction of
iodobenzene and 4-iodo acetophenone with tert-butyl amine furnished 92 and 89
yield of respective amide (Table 56 entry 7-8) Benzyl amine provided excellent
yields of N-benzylbenzamide (Table 56 entry 9) To our delight aromatic secondary
amine such as N-methyl aniline efficiently reacts with iodobenzene furnishing 91
yield of N-methyl-N-phenylbenzamide (Table 56 entry 10)
Table 56 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with various
aliphatic and aromatic primary amines and secondary aminesa
Entry Aryl iodide Amine Product Yield
()b
1
90
2
85
3
88
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
237
4
75
5
92
6
80
7
92
8
89
9
90
10
91
a Reaction conditions aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
238
53 CONCLUSION
The present study reports an efficient and common protocol for
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
by using a well-defined heterogeneous ImmPd-IL complex as a versatile
catalyst
The ease of preparation of the complex indefinite shelf life stability towards
air makes it an ideal complex for the above transformations
The reaction system was optimized with respect to various reaction parameters
and applied for carbonylation of a range of aryl iodides with different types of
alcohols phenols and amines furnishing good to excellent yields of the
corresponding products
The present protocol provided high yields of the desired products for all
carbonylation protocols
All the reactions were carried out under milder operating conditions
Catalytic system showed excellent activity and selectivity and effectively
recycled for four consecutive cycles
The leaching of the Pd metal was examined by hot filteration test and ICP-
AES analysis which revels no significant leaching of the palladium occurs
during the reaction
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
239
54 EXPERIMENTAL
541 Materials and Method N-methylimidazole (99+) and 3-trimethoxysilylpropyl
chloride (97+) were purchased from Aldrich PdCl2 was purchased from WAKO
Anhydrous redistilled 1-methylimidazole (99+) was purchased from Aldrich All
the dehydrated solvents were obtained from WAKO Aerosil 300 (300 m2g) was
obtained from Japan Aerosil Co and calcined at 573 K for 15 h in air and 30 min in
vacuum before use as a support The procedures for catalyst preparation were based
previous publication (Sasaki et al 2008) with some modifications Prepared catalyst
was characterized by using IR and elemental analysis and loading of the catalyst was
calculated by XRF measurements (SEA-2010 Seiko Electronic Industrial Co) The
XPS of ImmPd-IL was measured using a PHI5000 Versa Probe with monochromatic
focused (100 times 100 μm) Al Kα X-ray radiation (15 kV 30 mA) and dual beam
neutralization using a combination of argon ion gun and electron irradiation
The products are well-known in the literature and were compared with
authentic samples Progress of the reaction was monitored by gas chromatography
(GC) Gas chromatography analysis was carried out on Perkin-Elmer Clarus 400 GC
equipped flame ionization detector with a capillary column (Elite-1 30 m times 032 mm
times 025 μm) using the external standard method A GCMS-QP 2010 instrument (Rtx-
17 30 m times 25 mm id film thickness 025 μm df) (column flow 2 mL minminus1
80-240
degC at 10 degCmin rise) The 1H NMR spectra were recorded on Varian-300 MHz FT-
NMR spectrometer in CDCl3 using TMS as the internal standard The 13
C NMR
spectra were recorded with a JEOL FT-NMR model-AL300 (75 MHz) spectrometer
in CDCl3 Chemical shifts are reported in parts per million (δ) relative to
tetramethylsilane as the internal standard J (coupling constant) values were reported
in hertz (Hz) Proton splitting patterns are described as s (singlet) d (doublet) t
(triplet) and m (multiplet)
542 Preparation of immobilized palladium metal ion-containing ionic liquid
1-methyl-3-(3-trimethoxysilylpropyl) imidazolium chloride was synthesized by
mixing N-methylimidazole (0690 mol) and 3-trimethoxysilylpropyl chloride (0690
mol) in a dry 300 mL flask under a nitrogen atmosphere and refluxed for 48 h After
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
240
cooling to room temperature the resultant liquid was washed by dehydrated ethyl
acetate five times and dried at room temperature under reduced pressure for 48 h
The obtained compound was stored at 253 K under dry nitrogen Silica (Aerosil 300
surface area 300 m2g calcined at 573 K for 15 h in air) and 1-methyl-3-(3-
trimethoxysilylpropyl) imidazolium chloride (weight ratio 11) was dispersed in
dehydrated toluene and the mixture was refluxed for 48 h under nitrogen
After the reflux toluene was removed by filtration using glass filter and the
excess ionic liquid was removed by washing with dichloromethane several times The
resultant solid is denoted as Imm-IL In the next step Imm-IL was added to an
acetonitrile solution of PdCl2 and refluxed for 24 h Acetonitrile and excess of metal
chloride were removed by washing acetone using glass filter several times The metal
loading of ImmPd-IL was 34 wt as determined by XRF measurements (SEA-2010
Seiko Electronic Industrial Co)
543 General Experimental Procedure for Alkoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
and Et3N (3 mmol) were added The autoclave was closed purged three times with
carbon monoxide pressurized with 73 psi of CO and heated at 80 degC for 3 h After
completion of the reaction the reactor was cooled to room temperature and the
remaining CO gas was carefully vented and the reactor was opened The reactor
vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to remove any traces of
product and catalyst if present The catalyst was filtered and the reaction mixture was
evaporated under vacuum The residue obtained was purified by column
chromatography (silica gel 60-120 mesh petroleum etherethyl acetate 9505) to
afford the desired product
544 General Experimental Procedure for Recycling of ImmPd-IL
After completion of reaction the reaction mixture was cooled to room temperature
and the catalyst was collected by filtration The filtered catalyst was washed with
distilled water (3 times 5 mL) and methanol (3 times 5 mL) to remove all traces of product or
reactant present The filtered catalyst was then dried under reduced pressure The
dried catalyst was then used for the alkoxycarbonylation reaction of iodobenzene with
methanol for the recyclability experiment
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
241
545 XPS spectra of ImmPd-IL catalyst
The XPS spectra of ImmPd-IL shows that two peaks at 337 and 3424 eV for fresh
Imm-Pd are assigned as 3d52 and 3d32 for Pd2+
species respectively (Figure 53)
For the first recycle sample new peaks appear at 3342 and 3392 eV which are
assigned as 3d52 and 3d32 for Pd(0) species respectively indicating that the
reduction of the Pd species takes place during the catalytic reaction From the
spectrum of the fourth recycle sample it is obvious that the component of Pd2+
is
decreasing upon recycles although the component of Pd(0) remains constant
Figure 53 XPS of Pd 3d and Cl 2p for ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
242
546 General Experimental Procedure for Phenoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h After the completion of the reaction the reactor was cooled to room
temperature and the remaining CO gas was carefully vented and the reactor was
opened The reactor vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to
remove any traces of product and catalyst if present The catalyst was filtered and the
reaction mixture was evaporated under vacuum The residue obtained was purified by
column chromatography (silica gel 60-120 mesh petroleum etherethyl acetate
9505) to afford the desired product
547 General Experimental Procedure for Aminocarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol)
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h (the ensuing procedure is the same as that discussed above for the phenoxy
carbonylation reaction)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
243
55 SPECTRAL DATA
Methyl benzoate
GC-MS (EI 70 eV) mz () = 136 [M+] (35) 105 (100) 77 (55) 51 (20)
Ethyl benzoate
GC-MS (EI 70 eV) mz () = 150 [M+] (21) 122 (30) 105 (100) 77 (55)
Benzyl benzoate
1H NMR (300 MHz CDCl3) δ 804-808 (m 2H ArH) 731-752 (m 8H
ArH) 53 (s 2H CH2) 13
C NMR (75 MHz CDCl3) δ 16648 13619 13312
13025 12981 12870 12848 12834 12827 6677
Methyl 4-aminobenzoate
1H NMR (300 MHz CDCl3) δ 783 (d 2H J = 87 Hz ArH) 661 (d 2H J =
87 Hz ArH) 414 (br s 2H NH2) 383 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16724 15107 13151 11927 11368 5155
Methyl 4-hydroxybenzoate
1H NMR (300 MHz CDCl3) δ 794 (d 2H J = 87 Hz ArH) 722 (br s 1H
OH) 690 (d 2H J = 87 Hz ArH) 390 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16778 16055 13203 12201 11539 5223
Methyl 2-naphthoate
1H NMR (300 MHz CDCl3) δ 850 (s 1H ArH) 798-805 (m 2H ArH)
773 (t 2H J = 84 Hz ArH) 754-761 (m 2H ArH) 396 (s 3H OCH3) 13
C NMR
(75 MHz CDCl3) δ 16685 13634 13087 13082 13013 12938 12901 12778
12720 12632 12260 5235
Ethyl 4-acetylbenzoate
1H NMR (300 MHz CDCl3) δ 814-811 (m 2H ArH) 802-799 (m 2H
ArH) 441 (q 2H J = 69Hz CH2CH3) 265 (s 3H COCH3) 142 (t 3H J = 69Hz
CH2CH3) 13
C NMR (75 MHz CDCl3) δ 19766 16576 14012 13424 12977
12817 6147 2689 1427
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
244
Phenyl benzoate
1H NMR (300 MHz CDCl3) δ 825-822 (m 2H ArH) 768-863 (m 1H
ArH) 756-742 (m 4H ArH) 732-723 (m 3H ArH) 13
C NMR (75 MHz CDCl3)
δ 16590 15103 13365 13023 12964 12956 12864 12596 1217 GC-MS (EI
70 eV) mz () = 198 [M+] (9) 105 (100) 77 (40) 51 (9)
phenyl 4-nitrobenzoate
1H NMR (300 MHz CDCl3) δ = 837 (s 4H ArH) 723-748 (m 5H ArH)
13C NMR (75 MHz CDCl3) δ = 16347 15110 15072 13517 13144 12984
12657 12388 12157 GC-MS (EI 70 eV) mz () = 243 [M+] (15) 150 (100) 77
(10)
phenyl 4-methoxybenzoate
1H NMR (300 MHz CDCl3) δ = 814-816 (d 2H J = 87Hz ArH) 720-741
(m 5H ArH) 696-698 (d 2H J = 87 Hz ArH) 386 (s 3H OCH3) GC-MS (EI
70 eV) mz () = 228 [M+] (5) 135 (100) 107 (9) 77 (20)
phenyl-1-naphthoate
1H NMR (300 MHz CDCl3) δ = 904 (d 1H ArH) 845 (d1H ArH) 804
(d 1H ArH) 788 (d 1H ArH) 742-763 (m 5H ArH) 726-728 (m 3H ArH)
13C NMR (70 MHz CDCl3) δ = 16594 15118 13440 13408 13182 13134
12968 12883 12850 12829 12650 12605 12590 12465 12203
N-phenylbenzamide
1H NMR (300 MHz CDCl3) δ 798 (br s 1H NH) 787-883 (m 2H ArH)
763 (d 2H J = 76 Hz ArH) 732-753 (m 5H ArH) 716 (t 1H J = 73 ArH) 13
C
NMR (75 MHz CDCl3) δ 16590 13798 13502 13186 12911 12880 12709
12461 12032 ppm GC-MS mz () = 197 [M+] (42) 105 (100) 77 (54)
4-acetyl-N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 806 (d 2H J = 84Hz ArH) 777 (d 2H J
= 84Hz ArH) 601 (br s 1H NH) 393 (s 3H CH3) 148 (s 9H) 13
C NMR (75
MHz CDCl3) δ 16640 16605 13987 13234 12979 12682 5239 5195 2883
ppm GC-MS (EI 70 eV) mz () = 219 [M+] (20) 186 (22) 148 (100) 130 (30) 76
(20)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
229
psi equivalent yield of the desired product was observed (Table 51 entry 6) Hence
the finalized reaction conditions were base Et3N temperature 80 degC solvent
alcohol (also as a nucleophile) time 3 h and 73 psi of CO pressure
Table 51 Effect of bases temperature and time on ImmPd-IL catalyzed
alkoxycarbonylation reactiona
Entry Base Temp
(degC)
CO Press
(psi)
Yield
()b
1 K2CO3 80 73 80
2 Cs2CO3 80 73 79
3 DBU 80 73 85
4 Et3N 80 73 96
5 Et3N 100 73 97
6 Et3N 100 145 98
a Reaction conditions
Iodobenzene (2 mmol) methyl alcohol (5 mL) ImmPd-IL (2
mol ) Et3N (3 mmol) 73 psi CO press Temp (80 degC) Time (3 h) b Yield based on GC analysis
These optimized reaction parameters were then successfully applied to variety
of aryl iodides with different alcohols (Table 52) Model reaction of iodobenzene
with methyl alcohol provided 94 isolated yield of methyl benzoate (Table 52 entry
1) Ethyl alcohol and benzyl alcohol also reacts efficiently with iodobenzene
providing 95 and 89 yield of ethyl benzoate and benzyl benzoate respectively
(Table 52 entries 1-3) The substituted iodobenzene derivatives 4-iodoaniline and 4-
iodophenol furnished 80 and 75 yield of the methyl 4-aminobenzoate and methyl
4-hydroxybenzoate respectively (Table 52 entries 4-5) 4-Acetyliodobenzene reacts
with ethanol and provided 81 yield of ethyl-4-acetylbenzoate (Table 52 entry 6)
Iodonaphthalene furnished 79 yield of methyl 2-naphthoate (Table 52 entry 7)
whereas 1-iodo-4-nitrobenzene efficiently reacts with methyl alcohol furnishing a
moderate yield (70) of methyl 4-nitrobenzoate (Table 52 entry 8)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
230
Table 52 ImmPd-IL catalyzed alkoxycarbonylation of aryl iodides with various
alcoholsa
Entry Aryl iodide Alcohol Product Yield
()b
1
MeOH
94
2
EtOH
95
3
89
4
MeOH
80
5
MeOH
75
6
EtOH
81
7
MeOH
79
8
MeOH
70
a Reaction conditions aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
Et3N (3 mmol) 73 psi CO press Temp (80 degC) Time (3 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
231
It is believed that the supported palladium metal leaches out from the solid
support and goes into the solution at higher temperature and the reaction was
catalyzed mainly by dissolved palladium species (Tambade et al 2008) Hence to
determine whether the reaction was catalyzed due to the ImmPd-IL complex or a
leached palladium metal that comes off the support at higher temperature during the
reaction a hot filtration test was performed (Lempers 1998 Zhao 2009)
Hot filtration experiment was performed for the alkoxycarbonylation of
iodobenzene with benzyl alcohol using ImmPd-IL catalyst Reaction was carried out
at 80 oC during reaction the ImmPd-IL complex catalyst was filtered off and the
filtrate without addition of catalyst was allowed to react further It was found that no
further reaction occurred after this hot filtration procedure hence this experimental
finding suggests there is no palladium leaching from the ImmPd-IL complex during
the progress of a reaction In addition to reconfirm this observation ICP-AES
analysis of the reaction mixture was carried out after 15 and 3 h which revealed a
below detectable level (below 001 ppm) of palladium in solution
It is also important to study the separation and recyclability of the catalyst
The ImmPd-IL catalyst was separated from the reaction mixture by a simple filtration
procedure and was found to be effective up to four consecutive recycles for
methoxycarbonylation reaction (Figure 52) No significant decrease in yield during
recycle study was observed
Figure 52 Recycle study of ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
232
523 PHENOXYCARBONYLATION REACTIONS
ImmPd-IL catalytic system was further explored for the phenoxycarbonylation of aryl
iodides with various phenols to yield corresponding phenyl esters and it was observed
that corresponding products were obtained in good to excellent yields (Scheme 526)
Scheme 526 Phenoxycarbonylation of aryl iodides with phenols using ImmPd-IL
For the optimization of reaction the influence of critical parameters such as
solvent base and CO pressure on the carbonylation of iodobenzene with phenol as a
nucleophile have been investigated (Table 53 entries 1-8)
Table 53 Effect of solvents and bases on ImmPd-IL catalyzed Phenoxycarbonylation
reactiona
Entry Solvent Base CO Press
(psi)
Yield
()b
1 DMF Et3N 145 56
2 14-Dioxane Et3N 145 62
3
Water Et3N 145 0
4 Toluene Et3N 145 90
5 Toluene DBU 145 80
6 Toluene K2CO3 145 66
7 Toluene Cs2CO3 145 72
8 Toluene Et3N 73 85
a Reaction conditions Iodobenzene (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
base (3 mmol) solvent (10 mL) 8 h at 100 degC b Yield based on GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
233
The role of various solvents such as NN-dimethyl formamide (DMF) (56)
14-dioxane (62) water (0) and toluene (90) was studied (Table 53 entries 1-
4) It was observed that the reaction was more favourable using toluene as a solvent
and provided 90 yield of phenyl benzoate (Table 54 entry 4) Various screened
organic and inorganic bases (K2CO3 Cs2CO3 DBU and Et3N) showed Et3N (90) to
be superior base at 100 degC (Table 53 entries 4-7) The initial reaction was carried out
at 145 psi CO pressure which provided 90 yield of phenyl benzoate a further
decrease in CO pressure up to 73 psi decreased the yield of the phenyl benzoate
(Table 53 entry 8) Hence the finalized reaction parameters were Et3N as a base in
toluene CO 73 psi at 100 degC for 8 h
These finalized reaction parameters were then applied for the
phenoxycarbonylation of different aryl halides and phenols having different electron-
donating or withdrawing groups (Table 54 entries 1-7) Iodobenzene reacts
efficiently with phenol within 8 h providing 89 isolated yield of phenyl benzoate
(Table 54 entry 1) Substituted phenols such as p-cresol p-methoxyphenol and p-
chlorophenol reacts with iodobenzene furnishing good to excellent yields of the
corresponding product (Table 54 entries 2-4) The substituted iodobenzene
derivative reacts with phenol and provided 86 yields of phenyl 4-methoxybenzoate
(Table 54 entry 5) 1-Iodo-4-nitrobenzene furnished moderate yield (59) of the
phenyl 4-nitrobenzoate (Table 54 entry 6) Reaction of 1-iodonaphthalene with
phenol provided 75 yield of phenyl 1-naphthoate (Table 54 entry 7)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
234
Table 54 ImmPd-IL catalyzed Phenoxycarbonylation of aryl iodides with various
phenolsa
Entry Aryl iodide Phenol Product Yield
()b
1
89
2
90
3
88
4
84
5
86
6
59
7
75
a Reaction conditions aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
235
524 AMINOCARBONYLATION REACTIONS
The scope of ImmPd-IL was further extended for aminocarbonylation of aryl iodides
with a range of aliphatic aromatic primary and secondary amines (Scheme 527)
Scheme 527 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with amines
The reaction of iodobenzene with aniline was selected as a model reaction for
optimization Various solvents such as DMF (80) water (70) anisole (60) and
toluene (92) were screened for the reaction (ionic liquid was insoluble in water as it
was immobilised on solid support) but toluene was found to be the best solvent
(Table 55 entries 1-4) Screening of a variety of bases showed Et3N (90) to be
superior at 100 degC (Table 55 entries 4-6) Further reaction was optimized with
respect to various reaction parameters including temperature time and CO pressure
and the best optimized reaction conditions were then applied for the
aminocarbonylation of a variety of iodoaryls and amines
Table 55 Effect of solvents and bases on ImmPd-IL catalyzed aminocarbonylation
reactiona
Entry Solvent Base Yield
()b
1 DMF Et3N 80
2 Water Et3N 70
3
Anisole Et3N 60
4 Toluene Et3N 92
5 Toluene Na2CO3 52
6 Toluene K2CO3 57
a Reaction conditions
Iodobenzene (1 mmol) aniline (2 mmol) ImmPd-IL (2 mol)
Et3N (3 mmol) Toluene (10 mL) 8 h at 100 degC 145 psi CO pressure b Yield based GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
236
The optimized reaction parameters were then applied for the
aminocarbonylation of substituted aryl halides and aromatic amines The model
reaction of iodobenzene with aniline provided 90 isolated yield of N-
phenylbenzamide under optimized reaction conditions (Table 56 entry 1) 4-
iodoanisole furnished 85 yield of 4-methoxy-N-phenylbenzamide (Table 56 entries
2) 4-methoxyaniline reacts with iodobenzene and provided 88 yield of N-(4-
methoxyphenyl)benzamide (Table 56 entry 3) 3-(Trifluoromethyl)aniline provided a
moderate yield of the expected product (Table 56 entry 4)
There after various primary aliphatic amines were screened for the
aminocarbonylation Cyclohexyl amine efficiently reacts with iodobenzene and 2-
iodonaphthalene and provided 92 and 80 yield of N-cyclohexylbenzamide and N-
cyclohexyl-1-naphthamide respectively (Table 56 entries 5-6) Reaction of
iodobenzene and 4-iodo acetophenone with tert-butyl amine furnished 92 and 89
yield of respective amide (Table 56 entry 7-8) Benzyl amine provided excellent
yields of N-benzylbenzamide (Table 56 entry 9) To our delight aromatic secondary
amine such as N-methyl aniline efficiently reacts with iodobenzene furnishing 91
yield of N-methyl-N-phenylbenzamide (Table 56 entry 10)
Table 56 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with various
aliphatic and aromatic primary amines and secondary aminesa
Entry Aryl iodide Amine Product Yield
()b
1
90
2
85
3
88
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
237
4
75
5
92
6
80
7
92
8
89
9
90
10
91
a Reaction conditions aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
238
53 CONCLUSION
The present study reports an efficient and common protocol for
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
by using a well-defined heterogeneous ImmPd-IL complex as a versatile
catalyst
The ease of preparation of the complex indefinite shelf life stability towards
air makes it an ideal complex for the above transformations
The reaction system was optimized with respect to various reaction parameters
and applied for carbonylation of a range of aryl iodides with different types of
alcohols phenols and amines furnishing good to excellent yields of the
corresponding products
The present protocol provided high yields of the desired products for all
carbonylation protocols
All the reactions were carried out under milder operating conditions
Catalytic system showed excellent activity and selectivity and effectively
recycled for four consecutive cycles
The leaching of the Pd metal was examined by hot filteration test and ICP-
AES analysis which revels no significant leaching of the palladium occurs
during the reaction
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
239
54 EXPERIMENTAL
541 Materials and Method N-methylimidazole (99+) and 3-trimethoxysilylpropyl
chloride (97+) were purchased from Aldrich PdCl2 was purchased from WAKO
Anhydrous redistilled 1-methylimidazole (99+) was purchased from Aldrich All
the dehydrated solvents were obtained from WAKO Aerosil 300 (300 m2g) was
obtained from Japan Aerosil Co and calcined at 573 K for 15 h in air and 30 min in
vacuum before use as a support The procedures for catalyst preparation were based
previous publication (Sasaki et al 2008) with some modifications Prepared catalyst
was characterized by using IR and elemental analysis and loading of the catalyst was
calculated by XRF measurements (SEA-2010 Seiko Electronic Industrial Co) The
XPS of ImmPd-IL was measured using a PHI5000 Versa Probe with monochromatic
focused (100 times 100 μm) Al Kα X-ray radiation (15 kV 30 mA) and dual beam
neutralization using a combination of argon ion gun and electron irradiation
The products are well-known in the literature and were compared with
authentic samples Progress of the reaction was monitored by gas chromatography
(GC) Gas chromatography analysis was carried out on Perkin-Elmer Clarus 400 GC
equipped flame ionization detector with a capillary column (Elite-1 30 m times 032 mm
times 025 μm) using the external standard method A GCMS-QP 2010 instrument (Rtx-
17 30 m times 25 mm id film thickness 025 μm df) (column flow 2 mL minminus1
80-240
degC at 10 degCmin rise) The 1H NMR spectra were recorded on Varian-300 MHz FT-
NMR spectrometer in CDCl3 using TMS as the internal standard The 13
C NMR
spectra were recorded with a JEOL FT-NMR model-AL300 (75 MHz) spectrometer
in CDCl3 Chemical shifts are reported in parts per million (δ) relative to
tetramethylsilane as the internal standard J (coupling constant) values were reported
in hertz (Hz) Proton splitting patterns are described as s (singlet) d (doublet) t
(triplet) and m (multiplet)
542 Preparation of immobilized palladium metal ion-containing ionic liquid
1-methyl-3-(3-trimethoxysilylpropyl) imidazolium chloride was synthesized by
mixing N-methylimidazole (0690 mol) and 3-trimethoxysilylpropyl chloride (0690
mol) in a dry 300 mL flask under a nitrogen atmosphere and refluxed for 48 h After
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
240
cooling to room temperature the resultant liquid was washed by dehydrated ethyl
acetate five times and dried at room temperature under reduced pressure for 48 h
The obtained compound was stored at 253 K under dry nitrogen Silica (Aerosil 300
surface area 300 m2g calcined at 573 K for 15 h in air) and 1-methyl-3-(3-
trimethoxysilylpropyl) imidazolium chloride (weight ratio 11) was dispersed in
dehydrated toluene and the mixture was refluxed for 48 h under nitrogen
After the reflux toluene was removed by filtration using glass filter and the
excess ionic liquid was removed by washing with dichloromethane several times The
resultant solid is denoted as Imm-IL In the next step Imm-IL was added to an
acetonitrile solution of PdCl2 and refluxed for 24 h Acetonitrile and excess of metal
chloride were removed by washing acetone using glass filter several times The metal
loading of ImmPd-IL was 34 wt as determined by XRF measurements (SEA-2010
Seiko Electronic Industrial Co)
543 General Experimental Procedure for Alkoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
and Et3N (3 mmol) were added The autoclave was closed purged three times with
carbon monoxide pressurized with 73 psi of CO and heated at 80 degC for 3 h After
completion of the reaction the reactor was cooled to room temperature and the
remaining CO gas was carefully vented and the reactor was opened The reactor
vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to remove any traces of
product and catalyst if present The catalyst was filtered and the reaction mixture was
evaporated under vacuum The residue obtained was purified by column
chromatography (silica gel 60-120 mesh petroleum etherethyl acetate 9505) to
afford the desired product
544 General Experimental Procedure for Recycling of ImmPd-IL
After completion of reaction the reaction mixture was cooled to room temperature
and the catalyst was collected by filtration The filtered catalyst was washed with
distilled water (3 times 5 mL) and methanol (3 times 5 mL) to remove all traces of product or
reactant present The filtered catalyst was then dried under reduced pressure The
dried catalyst was then used for the alkoxycarbonylation reaction of iodobenzene with
methanol for the recyclability experiment
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
241
545 XPS spectra of ImmPd-IL catalyst
The XPS spectra of ImmPd-IL shows that two peaks at 337 and 3424 eV for fresh
Imm-Pd are assigned as 3d52 and 3d32 for Pd2+
species respectively (Figure 53)
For the first recycle sample new peaks appear at 3342 and 3392 eV which are
assigned as 3d52 and 3d32 for Pd(0) species respectively indicating that the
reduction of the Pd species takes place during the catalytic reaction From the
spectrum of the fourth recycle sample it is obvious that the component of Pd2+
is
decreasing upon recycles although the component of Pd(0) remains constant
Figure 53 XPS of Pd 3d and Cl 2p for ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
242
546 General Experimental Procedure for Phenoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h After the completion of the reaction the reactor was cooled to room
temperature and the remaining CO gas was carefully vented and the reactor was
opened The reactor vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to
remove any traces of product and catalyst if present The catalyst was filtered and the
reaction mixture was evaporated under vacuum The residue obtained was purified by
column chromatography (silica gel 60-120 mesh petroleum etherethyl acetate
9505) to afford the desired product
547 General Experimental Procedure for Aminocarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol)
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h (the ensuing procedure is the same as that discussed above for the phenoxy
carbonylation reaction)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
243
55 SPECTRAL DATA
Methyl benzoate
GC-MS (EI 70 eV) mz () = 136 [M+] (35) 105 (100) 77 (55) 51 (20)
Ethyl benzoate
GC-MS (EI 70 eV) mz () = 150 [M+] (21) 122 (30) 105 (100) 77 (55)
Benzyl benzoate
1H NMR (300 MHz CDCl3) δ 804-808 (m 2H ArH) 731-752 (m 8H
ArH) 53 (s 2H CH2) 13
C NMR (75 MHz CDCl3) δ 16648 13619 13312
13025 12981 12870 12848 12834 12827 6677
Methyl 4-aminobenzoate
1H NMR (300 MHz CDCl3) δ 783 (d 2H J = 87 Hz ArH) 661 (d 2H J =
87 Hz ArH) 414 (br s 2H NH2) 383 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16724 15107 13151 11927 11368 5155
Methyl 4-hydroxybenzoate
1H NMR (300 MHz CDCl3) δ 794 (d 2H J = 87 Hz ArH) 722 (br s 1H
OH) 690 (d 2H J = 87 Hz ArH) 390 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16778 16055 13203 12201 11539 5223
Methyl 2-naphthoate
1H NMR (300 MHz CDCl3) δ 850 (s 1H ArH) 798-805 (m 2H ArH)
773 (t 2H J = 84 Hz ArH) 754-761 (m 2H ArH) 396 (s 3H OCH3) 13
C NMR
(75 MHz CDCl3) δ 16685 13634 13087 13082 13013 12938 12901 12778
12720 12632 12260 5235
Ethyl 4-acetylbenzoate
1H NMR (300 MHz CDCl3) δ 814-811 (m 2H ArH) 802-799 (m 2H
ArH) 441 (q 2H J = 69Hz CH2CH3) 265 (s 3H COCH3) 142 (t 3H J = 69Hz
CH2CH3) 13
C NMR (75 MHz CDCl3) δ 19766 16576 14012 13424 12977
12817 6147 2689 1427
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
244
Phenyl benzoate
1H NMR (300 MHz CDCl3) δ 825-822 (m 2H ArH) 768-863 (m 1H
ArH) 756-742 (m 4H ArH) 732-723 (m 3H ArH) 13
C NMR (75 MHz CDCl3)
δ 16590 15103 13365 13023 12964 12956 12864 12596 1217 GC-MS (EI
70 eV) mz () = 198 [M+] (9) 105 (100) 77 (40) 51 (9)
phenyl 4-nitrobenzoate
1H NMR (300 MHz CDCl3) δ = 837 (s 4H ArH) 723-748 (m 5H ArH)
13C NMR (75 MHz CDCl3) δ = 16347 15110 15072 13517 13144 12984
12657 12388 12157 GC-MS (EI 70 eV) mz () = 243 [M+] (15) 150 (100) 77
(10)
phenyl 4-methoxybenzoate
1H NMR (300 MHz CDCl3) δ = 814-816 (d 2H J = 87Hz ArH) 720-741
(m 5H ArH) 696-698 (d 2H J = 87 Hz ArH) 386 (s 3H OCH3) GC-MS (EI
70 eV) mz () = 228 [M+] (5) 135 (100) 107 (9) 77 (20)
phenyl-1-naphthoate
1H NMR (300 MHz CDCl3) δ = 904 (d 1H ArH) 845 (d1H ArH) 804
(d 1H ArH) 788 (d 1H ArH) 742-763 (m 5H ArH) 726-728 (m 3H ArH)
13C NMR (70 MHz CDCl3) δ = 16594 15118 13440 13408 13182 13134
12968 12883 12850 12829 12650 12605 12590 12465 12203
N-phenylbenzamide
1H NMR (300 MHz CDCl3) δ 798 (br s 1H NH) 787-883 (m 2H ArH)
763 (d 2H J = 76 Hz ArH) 732-753 (m 5H ArH) 716 (t 1H J = 73 ArH) 13
C
NMR (75 MHz CDCl3) δ 16590 13798 13502 13186 12911 12880 12709
12461 12032 ppm GC-MS mz () = 197 [M+] (42) 105 (100) 77 (54)
4-acetyl-N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 806 (d 2H J = 84Hz ArH) 777 (d 2H J
= 84Hz ArH) 601 (br s 1H NH) 393 (s 3H CH3) 148 (s 9H) 13
C NMR (75
MHz CDCl3) δ 16640 16605 13987 13234 12979 12682 5239 5195 2883
ppm GC-MS (EI 70 eV) mz () = 219 [M+] (20) 186 (22) 148 (100) 130 (30) 76
(20)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
230
Table 52 ImmPd-IL catalyzed alkoxycarbonylation of aryl iodides with various
alcoholsa
Entry Aryl iodide Alcohol Product Yield
()b
1
MeOH
94
2
EtOH
95
3
89
4
MeOH
80
5
MeOH
75
6
EtOH
81
7
MeOH
79
8
MeOH
70
a Reaction conditions aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
Et3N (3 mmol) 73 psi CO press Temp (80 degC) Time (3 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
231
It is believed that the supported palladium metal leaches out from the solid
support and goes into the solution at higher temperature and the reaction was
catalyzed mainly by dissolved palladium species (Tambade et al 2008) Hence to
determine whether the reaction was catalyzed due to the ImmPd-IL complex or a
leached palladium metal that comes off the support at higher temperature during the
reaction a hot filtration test was performed (Lempers 1998 Zhao 2009)
Hot filtration experiment was performed for the alkoxycarbonylation of
iodobenzene with benzyl alcohol using ImmPd-IL catalyst Reaction was carried out
at 80 oC during reaction the ImmPd-IL complex catalyst was filtered off and the
filtrate without addition of catalyst was allowed to react further It was found that no
further reaction occurred after this hot filtration procedure hence this experimental
finding suggests there is no palladium leaching from the ImmPd-IL complex during
the progress of a reaction In addition to reconfirm this observation ICP-AES
analysis of the reaction mixture was carried out after 15 and 3 h which revealed a
below detectable level (below 001 ppm) of palladium in solution
It is also important to study the separation and recyclability of the catalyst
The ImmPd-IL catalyst was separated from the reaction mixture by a simple filtration
procedure and was found to be effective up to four consecutive recycles for
methoxycarbonylation reaction (Figure 52) No significant decrease in yield during
recycle study was observed
Figure 52 Recycle study of ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
232
523 PHENOXYCARBONYLATION REACTIONS
ImmPd-IL catalytic system was further explored for the phenoxycarbonylation of aryl
iodides with various phenols to yield corresponding phenyl esters and it was observed
that corresponding products were obtained in good to excellent yields (Scheme 526)
Scheme 526 Phenoxycarbonylation of aryl iodides with phenols using ImmPd-IL
For the optimization of reaction the influence of critical parameters such as
solvent base and CO pressure on the carbonylation of iodobenzene with phenol as a
nucleophile have been investigated (Table 53 entries 1-8)
Table 53 Effect of solvents and bases on ImmPd-IL catalyzed Phenoxycarbonylation
reactiona
Entry Solvent Base CO Press
(psi)
Yield
()b
1 DMF Et3N 145 56
2 14-Dioxane Et3N 145 62
3
Water Et3N 145 0
4 Toluene Et3N 145 90
5 Toluene DBU 145 80
6 Toluene K2CO3 145 66
7 Toluene Cs2CO3 145 72
8 Toluene Et3N 73 85
a Reaction conditions Iodobenzene (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
base (3 mmol) solvent (10 mL) 8 h at 100 degC b Yield based on GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
233
The role of various solvents such as NN-dimethyl formamide (DMF) (56)
14-dioxane (62) water (0) and toluene (90) was studied (Table 53 entries 1-
4) It was observed that the reaction was more favourable using toluene as a solvent
and provided 90 yield of phenyl benzoate (Table 54 entry 4) Various screened
organic and inorganic bases (K2CO3 Cs2CO3 DBU and Et3N) showed Et3N (90) to
be superior base at 100 degC (Table 53 entries 4-7) The initial reaction was carried out
at 145 psi CO pressure which provided 90 yield of phenyl benzoate a further
decrease in CO pressure up to 73 psi decreased the yield of the phenyl benzoate
(Table 53 entry 8) Hence the finalized reaction parameters were Et3N as a base in
toluene CO 73 psi at 100 degC for 8 h
These finalized reaction parameters were then applied for the
phenoxycarbonylation of different aryl halides and phenols having different electron-
donating or withdrawing groups (Table 54 entries 1-7) Iodobenzene reacts
efficiently with phenol within 8 h providing 89 isolated yield of phenyl benzoate
(Table 54 entry 1) Substituted phenols such as p-cresol p-methoxyphenol and p-
chlorophenol reacts with iodobenzene furnishing good to excellent yields of the
corresponding product (Table 54 entries 2-4) The substituted iodobenzene
derivative reacts with phenol and provided 86 yields of phenyl 4-methoxybenzoate
(Table 54 entry 5) 1-Iodo-4-nitrobenzene furnished moderate yield (59) of the
phenyl 4-nitrobenzoate (Table 54 entry 6) Reaction of 1-iodonaphthalene with
phenol provided 75 yield of phenyl 1-naphthoate (Table 54 entry 7)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
234
Table 54 ImmPd-IL catalyzed Phenoxycarbonylation of aryl iodides with various
phenolsa
Entry Aryl iodide Phenol Product Yield
()b
1
89
2
90
3
88
4
84
5
86
6
59
7
75
a Reaction conditions aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
235
524 AMINOCARBONYLATION REACTIONS
The scope of ImmPd-IL was further extended for aminocarbonylation of aryl iodides
with a range of aliphatic aromatic primary and secondary amines (Scheme 527)
Scheme 527 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with amines
The reaction of iodobenzene with aniline was selected as a model reaction for
optimization Various solvents such as DMF (80) water (70) anisole (60) and
toluene (92) were screened for the reaction (ionic liquid was insoluble in water as it
was immobilised on solid support) but toluene was found to be the best solvent
(Table 55 entries 1-4) Screening of a variety of bases showed Et3N (90) to be
superior at 100 degC (Table 55 entries 4-6) Further reaction was optimized with
respect to various reaction parameters including temperature time and CO pressure
and the best optimized reaction conditions were then applied for the
aminocarbonylation of a variety of iodoaryls and amines
Table 55 Effect of solvents and bases on ImmPd-IL catalyzed aminocarbonylation
reactiona
Entry Solvent Base Yield
()b
1 DMF Et3N 80
2 Water Et3N 70
3
Anisole Et3N 60
4 Toluene Et3N 92
5 Toluene Na2CO3 52
6 Toluene K2CO3 57
a Reaction conditions
Iodobenzene (1 mmol) aniline (2 mmol) ImmPd-IL (2 mol)
Et3N (3 mmol) Toluene (10 mL) 8 h at 100 degC 145 psi CO pressure b Yield based GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
236
The optimized reaction parameters were then applied for the
aminocarbonylation of substituted aryl halides and aromatic amines The model
reaction of iodobenzene with aniline provided 90 isolated yield of N-
phenylbenzamide under optimized reaction conditions (Table 56 entry 1) 4-
iodoanisole furnished 85 yield of 4-methoxy-N-phenylbenzamide (Table 56 entries
2) 4-methoxyaniline reacts with iodobenzene and provided 88 yield of N-(4-
methoxyphenyl)benzamide (Table 56 entry 3) 3-(Trifluoromethyl)aniline provided a
moderate yield of the expected product (Table 56 entry 4)
There after various primary aliphatic amines were screened for the
aminocarbonylation Cyclohexyl amine efficiently reacts with iodobenzene and 2-
iodonaphthalene and provided 92 and 80 yield of N-cyclohexylbenzamide and N-
cyclohexyl-1-naphthamide respectively (Table 56 entries 5-6) Reaction of
iodobenzene and 4-iodo acetophenone with tert-butyl amine furnished 92 and 89
yield of respective amide (Table 56 entry 7-8) Benzyl amine provided excellent
yields of N-benzylbenzamide (Table 56 entry 9) To our delight aromatic secondary
amine such as N-methyl aniline efficiently reacts with iodobenzene furnishing 91
yield of N-methyl-N-phenylbenzamide (Table 56 entry 10)
Table 56 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with various
aliphatic and aromatic primary amines and secondary aminesa
Entry Aryl iodide Amine Product Yield
()b
1
90
2
85
3
88
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
237
4
75
5
92
6
80
7
92
8
89
9
90
10
91
a Reaction conditions aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
238
53 CONCLUSION
The present study reports an efficient and common protocol for
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
by using a well-defined heterogeneous ImmPd-IL complex as a versatile
catalyst
The ease of preparation of the complex indefinite shelf life stability towards
air makes it an ideal complex for the above transformations
The reaction system was optimized with respect to various reaction parameters
and applied for carbonylation of a range of aryl iodides with different types of
alcohols phenols and amines furnishing good to excellent yields of the
corresponding products
The present protocol provided high yields of the desired products for all
carbonylation protocols
All the reactions were carried out under milder operating conditions
Catalytic system showed excellent activity and selectivity and effectively
recycled for four consecutive cycles
The leaching of the Pd metal was examined by hot filteration test and ICP-
AES analysis which revels no significant leaching of the palladium occurs
during the reaction
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
239
54 EXPERIMENTAL
541 Materials and Method N-methylimidazole (99+) and 3-trimethoxysilylpropyl
chloride (97+) were purchased from Aldrich PdCl2 was purchased from WAKO
Anhydrous redistilled 1-methylimidazole (99+) was purchased from Aldrich All
the dehydrated solvents were obtained from WAKO Aerosil 300 (300 m2g) was
obtained from Japan Aerosil Co and calcined at 573 K for 15 h in air and 30 min in
vacuum before use as a support The procedures for catalyst preparation were based
previous publication (Sasaki et al 2008) with some modifications Prepared catalyst
was characterized by using IR and elemental analysis and loading of the catalyst was
calculated by XRF measurements (SEA-2010 Seiko Electronic Industrial Co) The
XPS of ImmPd-IL was measured using a PHI5000 Versa Probe with monochromatic
focused (100 times 100 μm) Al Kα X-ray radiation (15 kV 30 mA) and dual beam
neutralization using a combination of argon ion gun and electron irradiation
The products are well-known in the literature and were compared with
authentic samples Progress of the reaction was monitored by gas chromatography
(GC) Gas chromatography analysis was carried out on Perkin-Elmer Clarus 400 GC
equipped flame ionization detector with a capillary column (Elite-1 30 m times 032 mm
times 025 μm) using the external standard method A GCMS-QP 2010 instrument (Rtx-
17 30 m times 25 mm id film thickness 025 μm df) (column flow 2 mL minminus1
80-240
degC at 10 degCmin rise) The 1H NMR spectra were recorded on Varian-300 MHz FT-
NMR spectrometer in CDCl3 using TMS as the internal standard The 13
C NMR
spectra were recorded with a JEOL FT-NMR model-AL300 (75 MHz) spectrometer
in CDCl3 Chemical shifts are reported in parts per million (δ) relative to
tetramethylsilane as the internal standard J (coupling constant) values were reported
in hertz (Hz) Proton splitting patterns are described as s (singlet) d (doublet) t
(triplet) and m (multiplet)
542 Preparation of immobilized palladium metal ion-containing ionic liquid
1-methyl-3-(3-trimethoxysilylpropyl) imidazolium chloride was synthesized by
mixing N-methylimidazole (0690 mol) and 3-trimethoxysilylpropyl chloride (0690
mol) in a dry 300 mL flask under a nitrogen atmosphere and refluxed for 48 h After
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
240
cooling to room temperature the resultant liquid was washed by dehydrated ethyl
acetate five times and dried at room temperature under reduced pressure for 48 h
The obtained compound was stored at 253 K under dry nitrogen Silica (Aerosil 300
surface area 300 m2g calcined at 573 K for 15 h in air) and 1-methyl-3-(3-
trimethoxysilylpropyl) imidazolium chloride (weight ratio 11) was dispersed in
dehydrated toluene and the mixture was refluxed for 48 h under nitrogen
After the reflux toluene was removed by filtration using glass filter and the
excess ionic liquid was removed by washing with dichloromethane several times The
resultant solid is denoted as Imm-IL In the next step Imm-IL was added to an
acetonitrile solution of PdCl2 and refluxed for 24 h Acetonitrile and excess of metal
chloride were removed by washing acetone using glass filter several times The metal
loading of ImmPd-IL was 34 wt as determined by XRF measurements (SEA-2010
Seiko Electronic Industrial Co)
543 General Experimental Procedure for Alkoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
and Et3N (3 mmol) were added The autoclave was closed purged three times with
carbon monoxide pressurized with 73 psi of CO and heated at 80 degC for 3 h After
completion of the reaction the reactor was cooled to room temperature and the
remaining CO gas was carefully vented and the reactor was opened The reactor
vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to remove any traces of
product and catalyst if present The catalyst was filtered and the reaction mixture was
evaporated under vacuum The residue obtained was purified by column
chromatography (silica gel 60-120 mesh petroleum etherethyl acetate 9505) to
afford the desired product
544 General Experimental Procedure for Recycling of ImmPd-IL
After completion of reaction the reaction mixture was cooled to room temperature
and the catalyst was collected by filtration The filtered catalyst was washed with
distilled water (3 times 5 mL) and methanol (3 times 5 mL) to remove all traces of product or
reactant present The filtered catalyst was then dried under reduced pressure The
dried catalyst was then used for the alkoxycarbonylation reaction of iodobenzene with
methanol for the recyclability experiment
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
241
545 XPS spectra of ImmPd-IL catalyst
The XPS spectra of ImmPd-IL shows that two peaks at 337 and 3424 eV for fresh
Imm-Pd are assigned as 3d52 and 3d32 for Pd2+
species respectively (Figure 53)
For the first recycle sample new peaks appear at 3342 and 3392 eV which are
assigned as 3d52 and 3d32 for Pd(0) species respectively indicating that the
reduction of the Pd species takes place during the catalytic reaction From the
spectrum of the fourth recycle sample it is obvious that the component of Pd2+
is
decreasing upon recycles although the component of Pd(0) remains constant
Figure 53 XPS of Pd 3d and Cl 2p for ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
242
546 General Experimental Procedure for Phenoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h After the completion of the reaction the reactor was cooled to room
temperature and the remaining CO gas was carefully vented and the reactor was
opened The reactor vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to
remove any traces of product and catalyst if present The catalyst was filtered and the
reaction mixture was evaporated under vacuum The residue obtained was purified by
column chromatography (silica gel 60-120 mesh petroleum etherethyl acetate
9505) to afford the desired product
547 General Experimental Procedure for Aminocarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol)
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h (the ensuing procedure is the same as that discussed above for the phenoxy
carbonylation reaction)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
243
55 SPECTRAL DATA
Methyl benzoate
GC-MS (EI 70 eV) mz () = 136 [M+] (35) 105 (100) 77 (55) 51 (20)
Ethyl benzoate
GC-MS (EI 70 eV) mz () = 150 [M+] (21) 122 (30) 105 (100) 77 (55)
Benzyl benzoate
1H NMR (300 MHz CDCl3) δ 804-808 (m 2H ArH) 731-752 (m 8H
ArH) 53 (s 2H CH2) 13
C NMR (75 MHz CDCl3) δ 16648 13619 13312
13025 12981 12870 12848 12834 12827 6677
Methyl 4-aminobenzoate
1H NMR (300 MHz CDCl3) δ 783 (d 2H J = 87 Hz ArH) 661 (d 2H J =
87 Hz ArH) 414 (br s 2H NH2) 383 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16724 15107 13151 11927 11368 5155
Methyl 4-hydroxybenzoate
1H NMR (300 MHz CDCl3) δ 794 (d 2H J = 87 Hz ArH) 722 (br s 1H
OH) 690 (d 2H J = 87 Hz ArH) 390 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16778 16055 13203 12201 11539 5223
Methyl 2-naphthoate
1H NMR (300 MHz CDCl3) δ 850 (s 1H ArH) 798-805 (m 2H ArH)
773 (t 2H J = 84 Hz ArH) 754-761 (m 2H ArH) 396 (s 3H OCH3) 13
C NMR
(75 MHz CDCl3) δ 16685 13634 13087 13082 13013 12938 12901 12778
12720 12632 12260 5235
Ethyl 4-acetylbenzoate
1H NMR (300 MHz CDCl3) δ 814-811 (m 2H ArH) 802-799 (m 2H
ArH) 441 (q 2H J = 69Hz CH2CH3) 265 (s 3H COCH3) 142 (t 3H J = 69Hz
CH2CH3) 13
C NMR (75 MHz CDCl3) δ 19766 16576 14012 13424 12977
12817 6147 2689 1427
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
244
Phenyl benzoate
1H NMR (300 MHz CDCl3) δ 825-822 (m 2H ArH) 768-863 (m 1H
ArH) 756-742 (m 4H ArH) 732-723 (m 3H ArH) 13
C NMR (75 MHz CDCl3)
δ 16590 15103 13365 13023 12964 12956 12864 12596 1217 GC-MS (EI
70 eV) mz () = 198 [M+] (9) 105 (100) 77 (40) 51 (9)
phenyl 4-nitrobenzoate
1H NMR (300 MHz CDCl3) δ = 837 (s 4H ArH) 723-748 (m 5H ArH)
13C NMR (75 MHz CDCl3) δ = 16347 15110 15072 13517 13144 12984
12657 12388 12157 GC-MS (EI 70 eV) mz () = 243 [M+] (15) 150 (100) 77
(10)
phenyl 4-methoxybenzoate
1H NMR (300 MHz CDCl3) δ = 814-816 (d 2H J = 87Hz ArH) 720-741
(m 5H ArH) 696-698 (d 2H J = 87 Hz ArH) 386 (s 3H OCH3) GC-MS (EI
70 eV) mz () = 228 [M+] (5) 135 (100) 107 (9) 77 (20)
phenyl-1-naphthoate
1H NMR (300 MHz CDCl3) δ = 904 (d 1H ArH) 845 (d1H ArH) 804
(d 1H ArH) 788 (d 1H ArH) 742-763 (m 5H ArH) 726-728 (m 3H ArH)
13C NMR (70 MHz CDCl3) δ = 16594 15118 13440 13408 13182 13134
12968 12883 12850 12829 12650 12605 12590 12465 12203
N-phenylbenzamide
1H NMR (300 MHz CDCl3) δ 798 (br s 1H NH) 787-883 (m 2H ArH)
763 (d 2H J = 76 Hz ArH) 732-753 (m 5H ArH) 716 (t 1H J = 73 ArH) 13
C
NMR (75 MHz CDCl3) δ 16590 13798 13502 13186 12911 12880 12709
12461 12032 ppm GC-MS mz () = 197 [M+] (42) 105 (100) 77 (54)
4-acetyl-N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 806 (d 2H J = 84Hz ArH) 777 (d 2H J
= 84Hz ArH) 601 (br s 1H NH) 393 (s 3H CH3) 148 (s 9H) 13
C NMR (75
MHz CDCl3) δ 16640 16605 13987 13234 12979 12682 5239 5195 2883
ppm GC-MS (EI 70 eV) mz () = 219 [M+] (20) 186 (22) 148 (100) 130 (30) 76
(20)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
231
It is believed that the supported palladium metal leaches out from the solid
support and goes into the solution at higher temperature and the reaction was
catalyzed mainly by dissolved palladium species (Tambade et al 2008) Hence to
determine whether the reaction was catalyzed due to the ImmPd-IL complex or a
leached palladium metal that comes off the support at higher temperature during the
reaction a hot filtration test was performed (Lempers 1998 Zhao 2009)
Hot filtration experiment was performed for the alkoxycarbonylation of
iodobenzene with benzyl alcohol using ImmPd-IL catalyst Reaction was carried out
at 80 oC during reaction the ImmPd-IL complex catalyst was filtered off and the
filtrate without addition of catalyst was allowed to react further It was found that no
further reaction occurred after this hot filtration procedure hence this experimental
finding suggests there is no palladium leaching from the ImmPd-IL complex during
the progress of a reaction In addition to reconfirm this observation ICP-AES
analysis of the reaction mixture was carried out after 15 and 3 h which revealed a
below detectable level (below 001 ppm) of palladium in solution
It is also important to study the separation and recyclability of the catalyst
The ImmPd-IL catalyst was separated from the reaction mixture by a simple filtration
procedure and was found to be effective up to four consecutive recycles for
methoxycarbonylation reaction (Figure 52) No significant decrease in yield during
recycle study was observed
Figure 52 Recycle study of ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
232
523 PHENOXYCARBONYLATION REACTIONS
ImmPd-IL catalytic system was further explored for the phenoxycarbonylation of aryl
iodides with various phenols to yield corresponding phenyl esters and it was observed
that corresponding products were obtained in good to excellent yields (Scheme 526)
Scheme 526 Phenoxycarbonylation of aryl iodides with phenols using ImmPd-IL
For the optimization of reaction the influence of critical parameters such as
solvent base and CO pressure on the carbonylation of iodobenzene with phenol as a
nucleophile have been investigated (Table 53 entries 1-8)
Table 53 Effect of solvents and bases on ImmPd-IL catalyzed Phenoxycarbonylation
reactiona
Entry Solvent Base CO Press
(psi)
Yield
()b
1 DMF Et3N 145 56
2 14-Dioxane Et3N 145 62
3
Water Et3N 145 0
4 Toluene Et3N 145 90
5 Toluene DBU 145 80
6 Toluene K2CO3 145 66
7 Toluene Cs2CO3 145 72
8 Toluene Et3N 73 85
a Reaction conditions Iodobenzene (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
base (3 mmol) solvent (10 mL) 8 h at 100 degC b Yield based on GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
233
The role of various solvents such as NN-dimethyl formamide (DMF) (56)
14-dioxane (62) water (0) and toluene (90) was studied (Table 53 entries 1-
4) It was observed that the reaction was more favourable using toluene as a solvent
and provided 90 yield of phenyl benzoate (Table 54 entry 4) Various screened
organic and inorganic bases (K2CO3 Cs2CO3 DBU and Et3N) showed Et3N (90) to
be superior base at 100 degC (Table 53 entries 4-7) The initial reaction was carried out
at 145 psi CO pressure which provided 90 yield of phenyl benzoate a further
decrease in CO pressure up to 73 psi decreased the yield of the phenyl benzoate
(Table 53 entry 8) Hence the finalized reaction parameters were Et3N as a base in
toluene CO 73 psi at 100 degC for 8 h
These finalized reaction parameters were then applied for the
phenoxycarbonylation of different aryl halides and phenols having different electron-
donating or withdrawing groups (Table 54 entries 1-7) Iodobenzene reacts
efficiently with phenol within 8 h providing 89 isolated yield of phenyl benzoate
(Table 54 entry 1) Substituted phenols such as p-cresol p-methoxyphenol and p-
chlorophenol reacts with iodobenzene furnishing good to excellent yields of the
corresponding product (Table 54 entries 2-4) The substituted iodobenzene
derivative reacts with phenol and provided 86 yields of phenyl 4-methoxybenzoate
(Table 54 entry 5) 1-Iodo-4-nitrobenzene furnished moderate yield (59) of the
phenyl 4-nitrobenzoate (Table 54 entry 6) Reaction of 1-iodonaphthalene with
phenol provided 75 yield of phenyl 1-naphthoate (Table 54 entry 7)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
234
Table 54 ImmPd-IL catalyzed Phenoxycarbonylation of aryl iodides with various
phenolsa
Entry Aryl iodide Phenol Product Yield
()b
1
89
2
90
3
88
4
84
5
86
6
59
7
75
a Reaction conditions aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
235
524 AMINOCARBONYLATION REACTIONS
The scope of ImmPd-IL was further extended for aminocarbonylation of aryl iodides
with a range of aliphatic aromatic primary and secondary amines (Scheme 527)
Scheme 527 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with amines
The reaction of iodobenzene with aniline was selected as a model reaction for
optimization Various solvents such as DMF (80) water (70) anisole (60) and
toluene (92) were screened for the reaction (ionic liquid was insoluble in water as it
was immobilised on solid support) but toluene was found to be the best solvent
(Table 55 entries 1-4) Screening of a variety of bases showed Et3N (90) to be
superior at 100 degC (Table 55 entries 4-6) Further reaction was optimized with
respect to various reaction parameters including temperature time and CO pressure
and the best optimized reaction conditions were then applied for the
aminocarbonylation of a variety of iodoaryls and amines
Table 55 Effect of solvents and bases on ImmPd-IL catalyzed aminocarbonylation
reactiona
Entry Solvent Base Yield
()b
1 DMF Et3N 80
2 Water Et3N 70
3
Anisole Et3N 60
4 Toluene Et3N 92
5 Toluene Na2CO3 52
6 Toluene K2CO3 57
a Reaction conditions
Iodobenzene (1 mmol) aniline (2 mmol) ImmPd-IL (2 mol)
Et3N (3 mmol) Toluene (10 mL) 8 h at 100 degC 145 psi CO pressure b Yield based GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
236
The optimized reaction parameters were then applied for the
aminocarbonylation of substituted aryl halides and aromatic amines The model
reaction of iodobenzene with aniline provided 90 isolated yield of N-
phenylbenzamide under optimized reaction conditions (Table 56 entry 1) 4-
iodoanisole furnished 85 yield of 4-methoxy-N-phenylbenzamide (Table 56 entries
2) 4-methoxyaniline reacts with iodobenzene and provided 88 yield of N-(4-
methoxyphenyl)benzamide (Table 56 entry 3) 3-(Trifluoromethyl)aniline provided a
moderate yield of the expected product (Table 56 entry 4)
There after various primary aliphatic amines were screened for the
aminocarbonylation Cyclohexyl amine efficiently reacts with iodobenzene and 2-
iodonaphthalene and provided 92 and 80 yield of N-cyclohexylbenzamide and N-
cyclohexyl-1-naphthamide respectively (Table 56 entries 5-6) Reaction of
iodobenzene and 4-iodo acetophenone with tert-butyl amine furnished 92 and 89
yield of respective amide (Table 56 entry 7-8) Benzyl amine provided excellent
yields of N-benzylbenzamide (Table 56 entry 9) To our delight aromatic secondary
amine such as N-methyl aniline efficiently reacts with iodobenzene furnishing 91
yield of N-methyl-N-phenylbenzamide (Table 56 entry 10)
Table 56 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with various
aliphatic and aromatic primary amines and secondary aminesa
Entry Aryl iodide Amine Product Yield
()b
1
90
2
85
3
88
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
237
4
75
5
92
6
80
7
92
8
89
9
90
10
91
a Reaction conditions aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
238
53 CONCLUSION
The present study reports an efficient and common protocol for
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
by using a well-defined heterogeneous ImmPd-IL complex as a versatile
catalyst
The ease of preparation of the complex indefinite shelf life stability towards
air makes it an ideal complex for the above transformations
The reaction system was optimized with respect to various reaction parameters
and applied for carbonylation of a range of aryl iodides with different types of
alcohols phenols and amines furnishing good to excellent yields of the
corresponding products
The present protocol provided high yields of the desired products for all
carbonylation protocols
All the reactions were carried out under milder operating conditions
Catalytic system showed excellent activity and selectivity and effectively
recycled for four consecutive cycles
The leaching of the Pd metal was examined by hot filteration test and ICP-
AES analysis which revels no significant leaching of the palladium occurs
during the reaction
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
239
54 EXPERIMENTAL
541 Materials and Method N-methylimidazole (99+) and 3-trimethoxysilylpropyl
chloride (97+) were purchased from Aldrich PdCl2 was purchased from WAKO
Anhydrous redistilled 1-methylimidazole (99+) was purchased from Aldrich All
the dehydrated solvents were obtained from WAKO Aerosil 300 (300 m2g) was
obtained from Japan Aerosil Co and calcined at 573 K for 15 h in air and 30 min in
vacuum before use as a support The procedures for catalyst preparation were based
previous publication (Sasaki et al 2008) with some modifications Prepared catalyst
was characterized by using IR and elemental analysis and loading of the catalyst was
calculated by XRF measurements (SEA-2010 Seiko Electronic Industrial Co) The
XPS of ImmPd-IL was measured using a PHI5000 Versa Probe with monochromatic
focused (100 times 100 μm) Al Kα X-ray radiation (15 kV 30 mA) and dual beam
neutralization using a combination of argon ion gun and electron irradiation
The products are well-known in the literature and were compared with
authentic samples Progress of the reaction was monitored by gas chromatography
(GC) Gas chromatography analysis was carried out on Perkin-Elmer Clarus 400 GC
equipped flame ionization detector with a capillary column (Elite-1 30 m times 032 mm
times 025 μm) using the external standard method A GCMS-QP 2010 instrument (Rtx-
17 30 m times 25 mm id film thickness 025 μm df) (column flow 2 mL minminus1
80-240
degC at 10 degCmin rise) The 1H NMR spectra were recorded on Varian-300 MHz FT-
NMR spectrometer in CDCl3 using TMS as the internal standard The 13
C NMR
spectra were recorded with a JEOL FT-NMR model-AL300 (75 MHz) spectrometer
in CDCl3 Chemical shifts are reported in parts per million (δ) relative to
tetramethylsilane as the internal standard J (coupling constant) values were reported
in hertz (Hz) Proton splitting patterns are described as s (singlet) d (doublet) t
(triplet) and m (multiplet)
542 Preparation of immobilized palladium metal ion-containing ionic liquid
1-methyl-3-(3-trimethoxysilylpropyl) imidazolium chloride was synthesized by
mixing N-methylimidazole (0690 mol) and 3-trimethoxysilylpropyl chloride (0690
mol) in a dry 300 mL flask under a nitrogen atmosphere and refluxed for 48 h After
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
240
cooling to room temperature the resultant liquid was washed by dehydrated ethyl
acetate five times and dried at room temperature under reduced pressure for 48 h
The obtained compound was stored at 253 K under dry nitrogen Silica (Aerosil 300
surface area 300 m2g calcined at 573 K for 15 h in air) and 1-methyl-3-(3-
trimethoxysilylpropyl) imidazolium chloride (weight ratio 11) was dispersed in
dehydrated toluene and the mixture was refluxed for 48 h under nitrogen
After the reflux toluene was removed by filtration using glass filter and the
excess ionic liquid was removed by washing with dichloromethane several times The
resultant solid is denoted as Imm-IL In the next step Imm-IL was added to an
acetonitrile solution of PdCl2 and refluxed for 24 h Acetonitrile and excess of metal
chloride were removed by washing acetone using glass filter several times The metal
loading of ImmPd-IL was 34 wt as determined by XRF measurements (SEA-2010
Seiko Electronic Industrial Co)
543 General Experimental Procedure for Alkoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
and Et3N (3 mmol) were added The autoclave was closed purged three times with
carbon monoxide pressurized with 73 psi of CO and heated at 80 degC for 3 h After
completion of the reaction the reactor was cooled to room temperature and the
remaining CO gas was carefully vented and the reactor was opened The reactor
vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to remove any traces of
product and catalyst if present The catalyst was filtered and the reaction mixture was
evaporated under vacuum The residue obtained was purified by column
chromatography (silica gel 60-120 mesh petroleum etherethyl acetate 9505) to
afford the desired product
544 General Experimental Procedure for Recycling of ImmPd-IL
After completion of reaction the reaction mixture was cooled to room temperature
and the catalyst was collected by filtration The filtered catalyst was washed with
distilled water (3 times 5 mL) and methanol (3 times 5 mL) to remove all traces of product or
reactant present The filtered catalyst was then dried under reduced pressure The
dried catalyst was then used for the alkoxycarbonylation reaction of iodobenzene with
methanol for the recyclability experiment
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
241
545 XPS spectra of ImmPd-IL catalyst
The XPS spectra of ImmPd-IL shows that two peaks at 337 and 3424 eV for fresh
Imm-Pd are assigned as 3d52 and 3d32 for Pd2+
species respectively (Figure 53)
For the first recycle sample new peaks appear at 3342 and 3392 eV which are
assigned as 3d52 and 3d32 for Pd(0) species respectively indicating that the
reduction of the Pd species takes place during the catalytic reaction From the
spectrum of the fourth recycle sample it is obvious that the component of Pd2+
is
decreasing upon recycles although the component of Pd(0) remains constant
Figure 53 XPS of Pd 3d and Cl 2p for ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
242
546 General Experimental Procedure for Phenoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h After the completion of the reaction the reactor was cooled to room
temperature and the remaining CO gas was carefully vented and the reactor was
opened The reactor vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to
remove any traces of product and catalyst if present The catalyst was filtered and the
reaction mixture was evaporated under vacuum The residue obtained was purified by
column chromatography (silica gel 60-120 mesh petroleum etherethyl acetate
9505) to afford the desired product
547 General Experimental Procedure for Aminocarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol)
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h (the ensuing procedure is the same as that discussed above for the phenoxy
carbonylation reaction)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
243
55 SPECTRAL DATA
Methyl benzoate
GC-MS (EI 70 eV) mz () = 136 [M+] (35) 105 (100) 77 (55) 51 (20)
Ethyl benzoate
GC-MS (EI 70 eV) mz () = 150 [M+] (21) 122 (30) 105 (100) 77 (55)
Benzyl benzoate
1H NMR (300 MHz CDCl3) δ 804-808 (m 2H ArH) 731-752 (m 8H
ArH) 53 (s 2H CH2) 13
C NMR (75 MHz CDCl3) δ 16648 13619 13312
13025 12981 12870 12848 12834 12827 6677
Methyl 4-aminobenzoate
1H NMR (300 MHz CDCl3) δ 783 (d 2H J = 87 Hz ArH) 661 (d 2H J =
87 Hz ArH) 414 (br s 2H NH2) 383 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16724 15107 13151 11927 11368 5155
Methyl 4-hydroxybenzoate
1H NMR (300 MHz CDCl3) δ 794 (d 2H J = 87 Hz ArH) 722 (br s 1H
OH) 690 (d 2H J = 87 Hz ArH) 390 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16778 16055 13203 12201 11539 5223
Methyl 2-naphthoate
1H NMR (300 MHz CDCl3) δ 850 (s 1H ArH) 798-805 (m 2H ArH)
773 (t 2H J = 84 Hz ArH) 754-761 (m 2H ArH) 396 (s 3H OCH3) 13
C NMR
(75 MHz CDCl3) δ 16685 13634 13087 13082 13013 12938 12901 12778
12720 12632 12260 5235
Ethyl 4-acetylbenzoate
1H NMR (300 MHz CDCl3) δ 814-811 (m 2H ArH) 802-799 (m 2H
ArH) 441 (q 2H J = 69Hz CH2CH3) 265 (s 3H COCH3) 142 (t 3H J = 69Hz
CH2CH3) 13
C NMR (75 MHz CDCl3) δ 19766 16576 14012 13424 12977
12817 6147 2689 1427
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
244
Phenyl benzoate
1H NMR (300 MHz CDCl3) δ 825-822 (m 2H ArH) 768-863 (m 1H
ArH) 756-742 (m 4H ArH) 732-723 (m 3H ArH) 13
C NMR (75 MHz CDCl3)
δ 16590 15103 13365 13023 12964 12956 12864 12596 1217 GC-MS (EI
70 eV) mz () = 198 [M+] (9) 105 (100) 77 (40) 51 (9)
phenyl 4-nitrobenzoate
1H NMR (300 MHz CDCl3) δ = 837 (s 4H ArH) 723-748 (m 5H ArH)
13C NMR (75 MHz CDCl3) δ = 16347 15110 15072 13517 13144 12984
12657 12388 12157 GC-MS (EI 70 eV) mz () = 243 [M+] (15) 150 (100) 77
(10)
phenyl 4-methoxybenzoate
1H NMR (300 MHz CDCl3) δ = 814-816 (d 2H J = 87Hz ArH) 720-741
(m 5H ArH) 696-698 (d 2H J = 87 Hz ArH) 386 (s 3H OCH3) GC-MS (EI
70 eV) mz () = 228 [M+] (5) 135 (100) 107 (9) 77 (20)
phenyl-1-naphthoate
1H NMR (300 MHz CDCl3) δ = 904 (d 1H ArH) 845 (d1H ArH) 804
(d 1H ArH) 788 (d 1H ArH) 742-763 (m 5H ArH) 726-728 (m 3H ArH)
13C NMR (70 MHz CDCl3) δ = 16594 15118 13440 13408 13182 13134
12968 12883 12850 12829 12650 12605 12590 12465 12203
N-phenylbenzamide
1H NMR (300 MHz CDCl3) δ 798 (br s 1H NH) 787-883 (m 2H ArH)
763 (d 2H J = 76 Hz ArH) 732-753 (m 5H ArH) 716 (t 1H J = 73 ArH) 13
C
NMR (75 MHz CDCl3) δ 16590 13798 13502 13186 12911 12880 12709
12461 12032 ppm GC-MS mz () = 197 [M+] (42) 105 (100) 77 (54)
4-acetyl-N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 806 (d 2H J = 84Hz ArH) 777 (d 2H J
= 84Hz ArH) 601 (br s 1H NH) 393 (s 3H CH3) 148 (s 9H) 13
C NMR (75
MHz CDCl3) δ 16640 16605 13987 13234 12979 12682 5239 5195 2883
ppm GC-MS (EI 70 eV) mz () = 219 [M+] (20) 186 (22) 148 (100) 130 (30) 76
(20)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
232
523 PHENOXYCARBONYLATION REACTIONS
ImmPd-IL catalytic system was further explored for the phenoxycarbonylation of aryl
iodides with various phenols to yield corresponding phenyl esters and it was observed
that corresponding products were obtained in good to excellent yields (Scheme 526)
Scheme 526 Phenoxycarbonylation of aryl iodides with phenols using ImmPd-IL
For the optimization of reaction the influence of critical parameters such as
solvent base and CO pressure on the carbonylation of iodobenzene with phenol as a
nucleophile have been investigated (Table 53 entries 1-8)
Table 53 Effect of solvents and bases on ImmPd-IL catalyzed Phenoxycarbonylation
reactiona
Entry Solvent Base CO Press
(psi)
Yield
()b
1 DMF Et3N 145 56
2 14-Dioxane Et3N 145 62
3
Water Et3N 145 0
4 Toluene Et3N 145 90
5 Toluene DBU 145 80
6 Toluene K2CO3 145 66
7 Toluene Cs2CO3 145 72
8 Toluene Et3N 73 85
a Reaction conditions Iodobenzene (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
base (3 mmol) solvent (10 mL) 8 h at 100 degC b Yield based on GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
233
The role of various solvents such as NN-dimethyl formamide (DMF) (56)
14-dioxane (62) water (0) and toluene (90) was studied (Table 53 entries 1-
4) It was observed that the reaction was more favourable using toluene as a solvent
and provided 90 yield of phenyl benzoate (Table 54 entry 4) Various screened
organic and inorganic bases (K2CO3 Cs2CO3 DBU and Et3N) showed Et3N (90) to
be superior base at 100 degC (Table 53 entries 4-7) The initial reaction was carried out
at 145 psi CO pressure which provided 90 yield of phenyl benzoate a further
decrease in CO pressure up to 73 psi decreased the yield of the phenyl benzoate
(Table 53 entry 8) Hence the finalized reaction parameters were Et3N as a base in
toluene CO 73 psi at 100 degC for 8 h
These finalized reaction parameters were then applied for the
phenoxycarbonylation of different aryl halides and phenols having different electron-
donating or withdrawing groups (Table 54 entries 1-7) Iodobenzene reacts
efficiently with phenol within 8 h providing 89 isolated yield of phenyl benzoate
(Table 54 entry 1) Substituted phenols such as p-cresol p-methoxyphenol and p-
chlorophenol reacts with iodobenzene furnishing good to excellent yields of the
corresponding product (Table 54 entries 2-4) The substituted iodobenzene
derivative reacts with phenol and provided 86 yields of phenyl 4-methoxybenzoate
(Table 54 entry 5) 1-Iodo-4-nitrobenzene furnished moderate yield (59) of the
phenyl 4-nitrobenzoate (Table 54 entry 6) Reaction of 1-iodonaphthalene with
phenol provided 75 yield of phenyl 1-naphthoate (Table 54 entry 7)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
234
Table 54 ImmPd-IL catalyzed Phenoxycarbonylation of aryl iodides with various
phenolsa
Entry Aryl iodide Phenol Product Yield
()b
1
89
2
90
3
88
4
84
5
86
6
59
7
75
a Reaction conditions aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
235
524 AMINOCARBONYLATION REACTIONS
The scope of ImmPd-IL was further extended for aminocarbonylation of aryl iodides
with a range of aliphatic aromatic primary and secondary amines (Scheme 527)
Scheme 527 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with amines
The reaction of iodobenzene with aniline was selected as a model reaction for
optimization Various solvents such as DMF (80) water (70) anisole (60) and
toluene (92) were screened for the reaction (ionic liquid was insoluble in water as it
was immobilised on solid support) but toluene was found to be the best solvent
(Table 55 entries 1-4) Screening of a variety of bases showed Et3N (90) to be
superior at 100 degC (Table 55 entries 4-6) Further reaction was optimized with
respect to various reaction parameters including temperature time and CO pressure
and the best optimized reaction conditions were then applied for the
aminocarbonylation of a variety of iodoaryls and amines
Table 55 Effect of solvents and bases on ImmPd-IL catalyzed aminocarbonylation
reactiona
Entry Solvent Base Yield
()b
1 DMF Et3N 80
2 Water Et3N 70
3
Anisole Et3N 60
4 Toluene Et3N 92
5 Toluene Na2CO3 52
6 Toluene K2CO3 57
a Reaction conditions
Iodobenzene (1 mmol) aniline (2 mmol) ImmPd-IL (2 mol)
Et3N (3 mmol) Toluene (10 mL) 8 h at 100 degC 145 psi CO pressure b Yield based GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
236
The optimized reaction parameters were then applied for the
aminocarbonylation of substituted aryl halides and aromatic amines The model
reaction of iodobenzene with aniline provided 90 isolated yield of N-
phenylbenzamide under optimized reaction conditions (Table 56 entry 1) 4-
iodoanisole furnished 85 yield of 4-methoxy-N-phenylbenzamide (Table 56 entries
2) 4-methoxyaniline reacts with iodobenzene and provided 88 yield of N-(4-
methoxyphenyl)benzamide (Table 56 entry 3) 3-(Trifluoromethyl)aniline provided a
moderate yield of the expected product (Table 56 entry 4)
There after various primary aliphatic amines were screened for the
aminocarbonylation Cyclohexyl amine efficiently reacts with iodobenzene and 2-
iodonaphthalene and provided 92 and 80 yield of N-cyclohexylbenzamide and N-
cyclohexyl-1-naphthamide respectively (Table 56 entries 5-6) Reaction of
iodobenzene and 4-iodo acetophenone with tert-butyl amine furnished 92 and 89
yield of respective amide (Table 56 entry 7-8) Benzyl amine provided excellent
yields of N-benzylbenzamide (Table 56 entry 9) To our delight aromatic secondary
amine such as N-methyl aniline efficiently reacts with iodobenzene furnishing 91
yield of N-methyl-N-phenylbenzamide (Table 56 entry 10)
Table 56 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with various
aliphatic and aromatic primary amines and secondary aminesa
Entry Aryl iodide Amine Product Yield
()b
1
90
2
85
3
88
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
237
4
75
5
92
6
80
7
92
8
89
9
90
10
91
a Reaction conditions aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
238
53 CONCLUSION
The present study reports an efficient and common protocol for
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
by using a well-defined heterogeneous ImmPd-IL complex as a versatile
catalyst
The ease of preparation of the complex indefinite shelf life stability towards
air makes it an ideal complex for the above transformations
The reaction system was optimized with respect to various reaction parameters
and applied for carbonylation of a range of aryl iodides with different types of
alcohols phenols and amines furnishing good to excellent yields of the
corresponding products
The present protocol provided high yields of the desired products for all
carbonylation protocols
All the reactions were carried out under milder operating conditions
Catalytic system showed excellent activity and selectivity and effectively
recycled for four consecutive cycles
The leaching of the Pd metal was examined by hot filteration test and ICP-
AES analysis which revels no significant leaching of the palladium occurs
during the reaction
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
239
54 EXPERIMENTAL
541 Materials and Method N-methylimidazole (99+) and 3-trimethoxysilylpropyl
chloride (97+) were purchased from Aldrich PdCl2 was purchased from WAKO
Anhydrous redistilled 1-methylimidazole (99+) was purchased from Aldrich All
the dehydrated solvents were obtained from WAKO Aerosil 300 (300 m2g) was
obtained from Japan Aerosil Co and calcined at 573 K for 15 h in air and 30 min in
vacuum before use as a support The procedures for catalyst preparation were based
previous publication (Sasaki et al 2008) with some modifications Prepared catalyst
was characterized by using IR and elemental analysis and loading of the catalyst was
calculated by XRF measurements (SEA-2010 Seiko Electronic Industrial Co) The
XPS of ImmPd-IL was measured using a PHI5000 Versa Probe with monochromatic
focused (100 times 100 μm) Al Kα X-ray radiation (15 kV 30 mA) and dual beam
neutralization using a combination of argon ion gun and electron irradiation
The products are well-known in the literature and were compared with
authentic samples Progress of the reaction was monitored by gas chromatography
(GC) Gas chromatography analysis was carried out on Perkin-Elmer Clarus 400 GC
equipped flame ionization detector with a capillary column (Elite-1 30 m times 032 mm
times 025 μm) using the external standard method A GCMS-QP 2010 instrument (Rtx-
17 30 m times 25 mm id film thickness 025 μm df) (column flow 2 mL minminus1
80-240
degC at 10 degCmin rise) The 1H NMR spectra were recorded on Varian-300 MHz FT-
NMR spectrometer in CDCl3 using TMS as the internal standard The 13
C NMR
spectra were recorded with a JEOL FT-NMR model-AL300 (75 MHz) spectrometer
in CDCl3 Chemical shifts are reported in parts per million (δ) relative to
tetramethylsilane as the internal standard J (coupling constant) values were reported
in hertz (Hz) Proton splitting patterns are described as s (singlet) d (doublet) t
(triplet) and m (multiplet)
542 Preparation of immobilized palladium metal ion-containing ionic liquid
1-methyl-3-(3-trimethoxysilylpropyl) imidazolium chloride was synthesized by
mixing N-methylimidazole (0690 mol) and 3-trimethoxysilylpropyl chloride (0690
mol) in a dry 300 mL flask under a nitrogen atmosphere and refluxed for 48 h After
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
240
cooling to room temperature the resultant liquid was washed by dehydrated ethyl
acetate five times and dried at room temperature under reduced pressure for 48 h
The obtained compound was stored at 253 K under dry nitrogen Silica (Aerosil 300
surface area 300 m2g calcined at 573 K for 15 h in air) and 1-methyl-3-(3-
trimethoxysilylpropyl) imidazolium chloride (weight ratio 11) was dispersed in
dehydrated toluene and the mixture was refluxed for 48 h under nitrogen
After the reflux toluene was removed by filtration using glass filter and the
excess ionic liquid was removed by washing with dichloromethane several times The
resultant solid is denoted as Imm-IL In the next step Imm-IL was added to an
acetonitrile solution of PdCl2 and refluxed for 24 h Acetonitrile and excess of metal
chloride were removed by washing acetone using glass filter several times The metal
loading of ImmPd-IL was 34 wt as determined by XRF measurements (SEA-2010
Seiko Electronic Industrial Co)
543 General Experimental Procedure for Alkoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
and Et3N (3 mmol) were added The autoclave was closed purged three times with
carbon monoxide pressurized with 73 psi of CO and heated at 80 degC for 3 h After
completion of the reaction the reactor was cooled to room temperature and the
remaining CO gas was carefully vented and the reactor was opened The reactor
vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to remove any traces of
product and catalyst if present The catalyst was filtered and the reaction mixture was
evaporated under vacuum The residue obtained was purified by column
chromatography (silica gel 60-120 mesh petroleum etherethyl acetate 9505) to
afford the desired product
544 General Experimental Procedure for Recycling of ImmPd-IL
After completion of reaction the reaction mixture was cooled to room temperature
and the catalyst was collected by filtration The filtered catalyst was washed with
distilled water (3 times 5 mL) and methanol (3 times 5 mL) to remove all traces of product or
reactant present The filtered catalyst was then dried under reduced pressure The
dried catalyst was then used for the alkoxycarbonylation reaction of iodobenzene with
methanol for the recyclability experiment
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
241
545 XPS spectra of ImmPd-IL catalyst
The XPS spectra of ImmPd-IL shows that two peaks at 337 and 3424 eV for fresh
Imm-Pd are assigned as 3d52 and 3d32 for Pd2+
species respectively (Figure 53)
For the first recycle sample new peaks appear at 3342 and 3392 eV which are
assigned as 3d52 and 3d32 for Pd(0) species respectively indicating that the
reduction of the Pd species takes place during the catalytic reaction From the
spectrum of the fourth recycle sample it is obvious that the component of Pd2+
is
decreasing upon recycles although the component of Pd(0) remains constant
Figure 53 XPS of Pd 3d and Cl 2p for ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
242
546 General Experimental Procedure for Phenoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h After the completion of the reaction the reactor was cooled to room
temperature and the remaining CO gas was carefully vented and the reactor was
opened The reactor vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to
remove any traces of product and catalyst if present The catalyst was filtered and the
reaction mixture was evaporated under vacuum The residue obtained was purified by
column chromatography (silica gel 60-120 mesh petroleum etherethyl acetate
9505) to afford the desired product
547 General Experimental Procedure for Aminocarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol)
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h (the ensuing procedure is the same as that discussed above for the phenoxy
carbonylation reaction)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
243
55 SPECTRAL DATA
Methyl benzoate
GC-MS (EI 70 eV) mz () = 136 [M+] (35) 105 (100) 77 (55) 51 (20)
Ethyl benzoate
GC-MS (EI 70 eV) mz () = 150 [M+] (21) 122 (30) 105 (100) 77 (55)
Benzyl benzoate
1H NMR (300 MHz CDCl3) δ 804-808 (m 2H ArH) 731-752 (m 8H
ArH) 53 (s 2H CH2) 13
C NMR (75 MHz CDCl3) δ 16648 13619 13312
13025 12981 12870 12848 12834 12827 6677
Methyl 4-aminobenzoate
1H NMR (300 MHz CDCl3) δ 783 (d 2H J = 87 Hz ArH) 661 (d 2H J =
87 Hz ArH) 414 (br s 2H NH2) 383 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16724 15107 13151 11927 11368 5155
Methyl 4-hydroxybenzoate
1H NMR (300 MHz CDCl3) δ 794 (d 2H J = 87 Hz ArH) 722 (br s 1H
OH) 690 (d 2H J = 87 Hz ArH) 390 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16778 16055 13203 12201 11539 5223
Methyl 2-naphthoate
1H NMR (300 MHz CDCl3) δ 850 (s 1H ArH) 798-805 (m 2H ArH)
773 (t 2H J = 84 Hz ArH) 754-761 (m 2H ArH) 396 (s 3H OCH3) 13
C NMR
(75 MHz CDCl3) δ 16685 13634 13087 13082 13013 12938 12901 12778
12720 12632 12260 5235
Ethyl 4-acetylbenzoate
1H NMR (300 MHz CDCl3) δ 814-811 (m 2H ArH) 802-799 (m 2H
ArH) 441 (q 2H J = 69Hz CH2CH3) 265 (s 3H COCH3) 142 (t 3H J = 69Hz
CH2CH3) 13
C NMR (75 MHz CDCl3) δ 19766 16576 14012 13424 12977
12817 6147 2689 1427
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
244
Phenyl benzoate
1H NMR (300 MHz CDCl3) δ 825-822 (m 2H ArH) 768-863 (m 1H
ArH) 756-742 (m 4H ArH) 732-723 (m 3H ArH) 13
C NMR (75 MHz CDCl3)
δ 16590 15103 13365 13023 12964 12956 12864 12596 1217 GC-MS (EI
70 eV) mz () = 198 [M+] (9) 105 (100) 77 (40) 51 (9)
phenyl 4-nitrobenzoate
1H NMR (300 MHz CDCl3) δ = 837 (s 4H ArH) 723-748 (m 5H ArH)
13C NMR (75 MHz CDCl3) δ = 16347 15110 15072 13517 13144 12984
12657 12388 12157 GC-MS (EI 70 eV) mz () = 243 [M+] (15) 150 (100) 77
(10)
phenyl 4-methoxybenzoate
1H NMR (300 MHz CDCl3) δ = 814-816 (d 2H J = 87Hz ArH) 720-741
(m 5H ArH) 696-698 (d 2H J = 87 Hz ArH) 386 (s 3H OCH3) GC-MS (EI
70 eV) mz () = 228 [M+] (5) 135 (100) 107 (9) 77 (20)
phenyl-1-naphthoate
1H NMR (300 MHz CDCl3) δ = 904 (d 1H ArH) 845 (d1H ArH) 804
(d 1H ArH) 788 (d 1H ArH) 742-763 (m 5H ArH) 726-728 (m 3H ArH)
13C NMR (70 MHz CDCl3) δ = 16594 15118 13440 13408 13182 13134
12968 12883 12850 12829 12650 12605 12590 12465 12203
N-phenylbenzamide
1H NMR (300 MHz CDCl3) δ 798 (br s 1H NH) 787-883 (m 2H ArH)
763 (d 2H J = 76 Hz ArH) 732-753 (m 5H ArH) 716 (t 1H J = 73 ArH) 13
C
NMR (75 MHz CDCl3) δ 16590 13798 13502 13186 12911 12880 12709
12461 12032 ppm GC-MS mz () = 197 [M+] (42) 105 (100) 77 (54)
4-acetyl-N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 806 (d 2H J = 84Hz ArH) 777 (d 2H J
= 84Hz ArH) 601 (br s 1H NH) 393 (s 3H CH3) 148 (s 9H) 13
C NMR (75
MHz CDCl3) δ 16640 16605 13987 13234 12979 12682 5239 5195 2883
ppm GC-MS (EI 70 eV) mz () = 219 [M+] (20) 186 (22) 148 (100) 130 (30) 76
(20)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
233
The role of various solvents such as NN-dimethyl formamide (DMF) (56)
14-dioxane (62) water (0) and toluene (90) was studied (Table 53 entries 1-
4) It was observed that the reaction was more favourable using toluene as a solvent
and provided 90 yield of phenyl benzoate (Table 54 entry 4) Various screened
organic and inorganic bases (K2CO3 Cs2CO3 DBU and Et3N) showed Et3N (90) to
be superior base at 100 degC (Table 53 entries 4-7) The initial reaction was carried out
at 145 psi CO pressure which provided 90 yield of phenyl benzoate a further
decrease in CO pressure up to 73 psi decreased the yield of the phenyl benzoate
(Table 53 entry 8) Hence the finalized reaction parameters were Et3N as a base in
toluene CO 73 psi at 100 degC for 8 h
These finalized reaction parameters were then applied for the
phenoxycarbonylation of different aryl halides and phenols having different electron-
donating or withdrawing groups (Table 54 entries 1-7) Iodobenzene reacts
efficiently with phenol within 8 h providing 89 isolated yield of phenyl benzoate
(Table 54 entry 1) Substituted phenols such as p-cresol p-methoxyphenol and p-
chlorophenol reacts with iodobenzene furnishing good to excellent yields of the
corresponding product (Table 54 entries 2-4) The substituted iodobenzene
derivative reacts with phenol and provided 86 yields of phenyl 4-methoxybenzoate
(Table 54 entry 5) 1-Iodo-4-nitrobenzene furnished moderate yield (59) of the
phenyl 4-nitrobenzoate (Table 54 entry 6) Reaction of 1-iodonaphthalene with
phenol provided 75 yield of phenyl 1-naphthoate (Table 54 entry 7)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
234
Table 54 ImmPd-IL catalyzed Phenoxycarbonylation of aryl iodides with various
phenolsa
Entry Aryl iodide Phenol Product Yield
()b
1
89
2
90
3
88
4
84
5
86
6
59
7
75
a Reaction conditions aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
235
524 AMINOCARBONYLATION REACTIONS
The scope of ImmPd-IL was further extended for aminocarbonylation of aryl iodides
with a range of aliphatic aromatic primary and secondary amines (Scheme 527)
Scheme 527 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with amines
The reaction of iodobenzene with aniline was selected as a model reaction for
optimization Various solvents such as DMF (80) water (70) anisole (60) and
toluene (92) were screened for the reaction (ionic liquid was insoluble in water as it
was immobilised on solid support) but toluene was found to be the best solvent
(Table 55 entries 1-4) Screening of a variety of bases showed Et3N (90) to be
superior at 100 degC (Table 55 entries 4-6) Further reaction was optimized with
respect to various reaction parameters including temperature time and CO pressure
and the best optimized reaction conditions were then applied for the
aminocarbonylation of a variety of iodoaryls and amines
Table 55 Effect of solvents and bases on ImmPd-IL catalyzed aminocarbonylation
reactiona
Entry Solvent Base Yield
()b
1 DMF Et3N 80
2 Water Et3N 70
3
Anisole Et3N 60
4 Toluene Et3N 92
5 Toluene Na2CO3 52
6 Toluene K2CO3 57
a Reaction conditions
Iodobenzene (1 mmol) aniline (2 mmol) ImmPd-IL (2 mol)
Et3N (3 mmol) Toluene (10 mL) 8 h at 100 degC 145 psi CO pressure b Yield based GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
236
The optimized reaction parameters were then applied for the
aminocarbonylation of substituted aryl halides and aromatic amines The model
reaction of iodobenzene with aniline provided 90 isolated yield of N-
phenylbenzamide under optimized reaction conditions (Table 56 entry 1) 4-
iodoanisole furnished 85 yield of 4-methoxy-N-phenylbenzamide (Table 56 entries
2) 4-methoxyaniline reacts with iodobenzene and provided 88 yield of N-(4-
methoxyphenyl)benzamide (Table 56 entry 3) 3-(Trifluoromethyl)aniline provided a
moderate yield of the expected product (Table 56 entry 4)
There after various primary aliphatic amines were screened for the
aminocarbonylation Cyclohexyl amine efficiently reacts with iodobenzene and 2-
iodonaphthalene and provided 92 and 80 yield of N-cyclohexylbenzamide and N-
cyclohexyl-1-naphthamide respectively (Table 56 entries 5-6) Reaction of
iodobenzene and 4-iodo acetophenone with tert-butyl amine furnished 92 and 89
yield of respective amide (Table 56 entry 7-8) Benzyl amine provided excellent
yields of N-benzylbenzamide (Table 56 entry 9) To our delight aromatic secondary
amine such as N-methyl aniline efficiently reacts with iodobenzene furnishing 91
yield of N-methyl-N-phenylbenzamide (Table 56 entry 10)
Table 56 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with various
aliphatic and aromatic primary amines and secondary aminesa
Entry Aryl iodide Amine Product Yield
()b
1
90
2
85
3
88
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
237
4
75
5
92
6
80
7
92
8
89
9
90
10
91
a Reaction conditions aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
238
53 CONCLUSION
The present study reports an efficient and common protocol for
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
by using a well-defined heterogeneous ImmPd-IL complex as a versatile
catalyst
The ease of preparation of the complex indefinite shelf life stability towards
air makes it an ideal complex for the above transformations
The reaction system was optimized with respect to various reaction parameters
and applied for carbonylation of a range of aryl iodides with different types of
alcohols phenols and amines furnishing good to excellent yields of the
corresponding products
The present protocol provided high yields of the desired products for all
carbonylation protocols
All the reactions were carried out under milder operating conditions
Catalytic system showed excellent activity and selectivity and effectively
recycled for four consecutive cycles
The leaching of the Pd metal was examined by hot filteration test and ICP-
AES analysis which revels no significant leaching of the palladium occurs
during the reaction
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
239
54 EXPERIMENTAL
541 Materials and Method N-methylimidazole (99+) and 3-trimethoxysilylpropyl
chloride (97+) were purchased from Aldrich PdCl2 was purchased from WAKO
Anhydrous redistilled 1-methylimidazole (99+) was purchased from Aldrich All
the dehydrated solvents were obtained from WAKO Aerosil 300 (300 m2g) was
obtained from Japan Aerosil Co and calcined at 573 K for 15 h in air and 30 min in
vacuum before use as a support The procedures for catalyst preparation were based
previous publication (Sasaki et al 2008) with some modifications Prepared catalyst
was characterized by using IR and elemental analysis and loading of the catalyst was
calculated by XRF measurements (SEA-2010 Seiko Electronic Industrial Co) The
XPS of ImmPd-IL was measured using a PHI5000 Versa Probe with monochromatic
focused (100 times 100 μm) Al Kα X-ray radiation (15 kV 30 mA) and dual beam
neutralization using a combination of argon ion gun and electron irradiation
The products are well-known in the literature and were compared with
authentic samples Progress of the reaction was monitored by gas chromatography
(GC) Gas chromatography analysis was carried out on Perkin-Elmer Clarus 400 GC
equipped flame ionization detector with a capillary column (Elite-1 30 m times 032 mm
times 025 μm) using the external standard method A GCMS-QP 2010 instrument (Rtx-
17 30 m times 25 mm id film thickness 025 μm df) (column flow 2 mL minminus1
80-240
degC at 10 degCmin rise) The 1H NMR spectra were recorded on Varian-300 MHz FT-
NMR spectrometer in CDCl3 using TMS as the internal standard The 13
C NMR
spectra were recorded with a JEOL FT-NMR model-AL300 (75 MHz) spectrometer
in CDCl3 Chemical shifts are reported in parts per million (δ) relative to
tetramethylsilane as the internal standard J (coupling constant) values were reported
in hertz (Hz) Proton splitting patterns are described as s (singlet) d (doublet) t
(triplet) and m (multiplet)
542 Preparation of immobilized palladium metal ion-containing ionic liquid
1-methyl-3-(3-trimethoxysilylpropyl) imidazolium chloride was synthesized by
mixing N-methylimidazole (0690 mol) and 3-trimethoxysilylpropyl chloride (0690
mol) in a dry 300 mL flask under a nitrogen atmosphere and refluxed for 48 h After
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
240
cooling to room temperature the resultant liquid was washed by dehydrated ethyl
acetate five times and dried at room temperature under reduced pressure for 48 h
The obtained compound was stored at 253 K under dry nitrogen Silica (Aerosil 300
surface area 300 m2g calcined at 573 K for 15 h in air) and 1-methyl-3-(3-
trimethoxysilylpropyl) imidazolium chloride (weight ratio 11) was dispersed in
dehydrated toluene and the mixture was refluxed for 48 h under nitrogen
After the reflux toluene was removed by filtration using glass filter and the
excess ionic liquid was removed by washing with dichloromethane several times The
resultant solid is denoted as Imm-IL In the next step Imm-IL was added to an
acetonitrile solution of PdCl2 and refluxed for 24 h Acetonitrile and excess of metal
chloride were removed by washing acetone using glass filter several times The metal
loading of ImmPd-IL was 34 wt as determined by XRF measurements (SEA-2010
Seiko Electronic Industrial Co)
543 General Experimental Procedure for Alkoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
and Et3N (3 mmol) were added The autoclave was closed purged three times with
carbon monoxide pressurized with 73 psi of CO and heated at 80 degC for 3 h After
completion of the reaction the reactor was cooled to room temperature and the
remaining CO gas was carefully vented and the reactor was opened The reactor
vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to remove any traces of
product and catalyst if present The catalyst was filtered and the reaction mixture was
evaporated under vacuum The residue obtained was purified by column
chromatography (silica gel 60-120 mesh petroleum etherethyl acetate 9505) to
afford the desired product
544 General Experimental Procedure for Recycling of ImmPd-IL
After completion of reaction the reaction mixture was cooled to room temperature
and the catalyst was collected by filtration The filtered catalyst was washed with
distilled water (3 times 5 mL) and methanol (3 times 5 mL) to remove all traces of product or
reactant present The filtered catalyst was then dried under reduced pressure The
dried catalyst was then used for the alkoxycarbonylation reaction of iodobenzene with
methanol for the recyclability experiment
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
241
545 XPS spectra of ImmPd-IL catalyst
The XPS spectra of ImmPd-IL shows that two peaks at 337 and 3424 eV for fresh
Imm-Pd are assigned as 3d52 and 3d32 for Pd2+
species respectively (Figure 53)
For the first recycle sample new peaks appear at 3342 and 3392 eV which are
assigned as 3d52 and 3d32 for Pd(0) species respectively indicating that the
reduction of the Pd species takes place during the catalytic reaction From the
spectrum of the fourth recycle sample it is obvious that the component of Pd2+
is
decreasing upon recycles although the component of Pd(0) remains constant
Figure 53 XPS of Pd 3d and Cl 2p for ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
242
546 General Experimental Procedure for Phenoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h After the completion of the reaction the reactor was cooled to room
temperature and the remaining CO gas was carefully vented and the reactor was
opened The reactor vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to
remove any traces of product and catalyst if present The catalyst was filtered and the
reaction mixture was evaporated under vacuum The residue obtained was purified by
column chromatography (silica gel 60-120 mesh petroleum etherethyl acetate
9505) to afford the desired product
547 General Experimental Procedure for Aminocarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol)
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h (the ensuing procedure is the same as that discussed above for the phenoxy
carbonylation reaction)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
243
55 SPECTRAL DATA
Methyl benzoate
GC-MS (EI 70 eV) mz () = 136 [M+] (35) 105 (100) 77 (55) 51 (20)
Ethyl benzoate
GC-MS (EI 70 eV) mz () = 150 [M+] (21) 122 (30) 105 (100) 77 (55)
Benzyl benzoate
1H NMR (300 MHz CDCl3) δ 804-808 (m 2H ArH) 731-752 (m 8H
ArH) 53 (s 2H CH2) 13
C NMR (75 MHz CDCl3) δ 16648 13619 13312
13025 12981 12870 12848 12834 12827 6677
Methyl 4-aminobenzoate
1H NMR (300 MHz CDCl3) δ 783 (d 2H J = 87 Hz ArH) 661 (d 2H J =
87 Hz ArH) 414 (br s 2H NH2) 383 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16724 15107 13151 11927 11368 5155
Methyl 4-hydroxybenzoate
1H NMR (300 MHz CDCl3) δ 794 (d 2H J = 87 Hz ArH) 722 (br s 1H
OH) 690 (d 2H J = 87 Hz ArH) 390 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16778 16055 13203 12201 11539 5223
Methyl 2-naphthoate
1H NMR (300 MHz CDCl3) δ 850 (s 1H ArH) 798-805 (m 2H ArH)
773 (t 2H J = 84 Hz ArH) 754-761 (m 2H ArH) 396 (s 3H OCH3) 13
C NMR
(75 MHz CDCl3) δ 16685 13634 13087 13082 13013 12938 12901 12778
12720 12632 12260 5235
Ethyl 4-acetylbenzoate
1H NMR (300 MHz CDCl3) δ 814-811 (m 2H ArH) 802-799 (m 2H
ArH) 441 (q 2H J = 69Hz CH2CH3) 265 (s 3H COCH3) 142 (t 3H J = 69Hz
CH2CH3) 13
C NMR (75 MHz CDCl3) δ 19766 16576 14012 13424 12977
12817 6147 2689 1427
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
244
Phenyl benzoate
1H NMR (300 MHz CDCl3) δ 825-822 (m 2H ArH) 768-863 (m 1H
ArH) 756-742 (m 4H ArH) 732-723 (m 3H ArH) 13
C NMR (75 MHz CDCl3)
δ 16590 15103 13365 13023 12964 12956 12864 12596 1217 GC-MS (EI
70 eV) mz () = 198 [M+] (9) 105 (100) 77 (40) 51 (9)
phenyl 4-nitrobenzoate
1H NMR (300 MHz CDCl3) δ = 837 (s 4H ArH) 723-748 (m 5H ArH)
13C NMR (75 MHz CDCl3) δ = 16347 15110 15072 13517 13144 12984
12657 12388 12157 GC-MS (EI 70 eV) mz () = 243 [M+] (15) 150 (100) 77
(10)
phenyl 4-methoxybenzoate
1H NMR (300 MHz CDCl3) δ = 814-816 (d 2H J = 87Hz ArH) 720-741
(m 5H ArH) 696-698 (d 2H J = 87 Hz ArH) 386 (s 3H OCH3) GC-MS (EI
70 eV) mz () = 228 [M+] (5) 135 (100) 107 (9) 77 (20)
phenyl-1-naphthoate
1H NMR (300 MHz CDCl3) δ = 904 (d 1H ArH) 845 (d1H ArH) 804
(d 1H ArH) 788 (d 1H ArH) 742-763 (m 5H ArH) 726-728 (m 3H ArH)
13C NMR (70 MHz CDCl3) δ = 16594 15118 13440 13408 13182 13134
12968 12883 12850 12829 12650 12605 12590 12465 12203
N-phenylbenzamide
1H NMR (300 MHz CDCl3) δ 798 (br s 1H NH) 787-883 (m 2H ArH)
763 (d 2H J = 76 Hz ArH) 732-753 (m 5H ArH) 716 (t 1H J = 73 ArH) 13
C
NMR (75 MHz CDCl3) δ 16590 13798 13502 13186 12911 12880 12709
12461 12032 ppm GC-MS mz () = 197 [M+] (42) 105 (100) 77 (54)
4-acetyl-N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 806 (d 2H J = 84Hz ArH) 777 (d 2H J
= 84Hz ArH) 601 (br s 1H NH) 393 (s 3H CH3) 148 (s 9H) 13
C NMR (75
MHz CDCl3) δ 16640 16605 13987 13234 12979 12682 5239 5195 2883
ppm GC-MS (EI 70 eV) mz () = 219 [M+] (20) 186 (22) 148 (100) 130 (30) 76
(20)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
234
Table 54 ImmPd-IL catalyzed Phenoxycarbonylation of aryl iodides with various
phenolsa
Entry Aryl iodide Phenol Product Yield
()b
1
89
2
90
3
88
4
84
5
86
6
59
7
75
a Reaction conditions aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
235
524 AMINOCARBONYLATION REACTIONS
The scope of ImmPd-IL was further extended for aminocarbonylation of aryl iodides
with a range of aliphatic aromatic primary and secondary amines (Scheme 527)
Scheme 527 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with amines
The reaction of iodobenzene with aniline was selected as a model reaction for
optimization Various solvents such as DMF (80) water (70) anisole (60) and
toluene (92) were screened for the reaction (ionic liquid was insoluble in water as it
was immobilised on solid support) but toluene was found to be the best solvent
(Table 55 entries 1-4) Screening of a variety of bases showed Et3N (90) to be
superior at 100 degC (Table 55 entries 4-6) Further reaction was optimized with
respect to various reaction parameters including temperature time and CO pressure
and the best optimized reaction conditions were then applied for the
aminocarbonylation of a variety of iodoaryls and amines
Table 55 Effect of solvents and bases on ImmPd-IL catalyzed aminocarbonylation
reactiona
Entry Solvent Base Yield
()b
1 DMF Et3N 80
2 Water Et3N 70
3
Anisole Et3N 60
4 Toluene Et3N 92
5 Toluene Na2CO3 52
6 Toluene K2CO3 57
a Reaction conditions
Iodobenzene (1 mmol) aniline (2 mmol) ImmPd-IL (2 mol)
Et3N (3 mmol) Toluene (10 mL) 8 h at 100 degC 145 psi CO pressure b Yield based GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
236
The optimized reaction parameters were then applied for the
aminocarbonylation of substituted aryl halides and aromatic amines The model
reaction of iodobenzene with aniline provided 90 isolated yield of N-
phenylbenzamide under optimized reaction conditions (Table 56 entry 1) 4-
iodoanisole furnished 85 yield of 4-methoxy-N-phenylbenzamide (Table 56 entries
2) 4-methoxyaniline reacts with iodobenzene and provided 88 yield of N-(4-
methoxyphenyl)benzamide (Table 56 entry 3) 3-(Trifluoromethyl)aniline provided a
moderate yield of the expected product (Table 56 entry 4)
There after various primary aliphatic amines were screened for the
aminocarbonylation Cyclohexyl amine efficiently reacts with iodobenzene and 2-
iodonaphthalene and provided 92 and 80 yield of N-cyclohexylbenzamide and N-
cyclohexyl-1-naphthamide respectively (Table 56 entries 5-6) Reaction of
iodobenzene and 4-iodo acetophenone with tert-butyl amine furnished 92 and 89
yield of respective amide (Table 56 entry 7-8) Benzyl amine provided excellent
yields of N-benzylbenzamide (Table 56 entry 9) To our delight aromatic secondary
amine such as N-methyl aniline efficiently reacts with iodobenzene furnishing 91
yield of N-methyl-N-phenylbenzamide (Table 56 entry 10)
Table 56 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with various
aliphatic and aromatic primary amines and secondary aminesa
Entry Aryl iodide Amine Product Yield
()b
1
90
2
85
3
88
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
237
4
75
5
92
6
80
7
92
8
89
9
90
10
91
a Reaction conditions aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
238
53 CONCLUSION
The present study reports an efficient and common protocol for
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
by using a well-defined heterogeneous ImmPd-IL complex as a versatile
catalyst
The ease of preparation of the complex indefinite shelf life stability towards
air makes it an ideal complex for the above transformations
The reaction system was optimized with respect to various reaction parameters
and applied for carbonylation of a range of aryl iodides with different types of
alcohols phenols and amines furnishing good to excellent yields of the
corresponding products
The present protocol provided high yields of the desired products for all
carbonylation protocols
All the reactions were carried out under milder operating conditions
Catalytic system showed excellent activity and selectivity and effectively
recycled for four consecutive cycles
The leaching of the Pd metal was examined by hot filteration test and ICP-
AES analysis which revels no significant leaching of the palladium occurs
during the reaction
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
239
54 EXPERIMENTAL
541 Materials and Method N-methylimidazole (99+) and 3-trimethoxysilylpropyl
chloride (97+) were purchased from Aldrich PdCl2 was purchased from WAKO
Anhydrous redistilled 1-methylimidazole (99+) was purchased from Aldrich All
the dehydrated solvents were obtained from WAKO Aerosil 300 (300 m2g) was
obtained from Japan Aerosil Co and calcined at 573 K for 15 h in air and 30 min in
vacuum before use as a support The procedures for catalyst preparation were based
previous publication (Sasaki et al 2008) with some modifications Prepared catalyst
was characterized by using IR and elemental analysis and loading of the catalyst was
calculated by XRF measurements (SEA-2010 Seiko Electronic Industrial Co) The
XPS of ImmPd-IL was measured using a PHI5000 Versa Probe with monochromatic
focused (100 times 100 μm) Al Kα X-ray radiation (15 kV 30 mA) and dual beam
neutralization using a combination of argon ion gun and electron irradiation
The products are well-known in the literature and were compared with
authentic samples Progress of the reaction was monitored by gas chromatography
(GC) Gas chromatography analysis was carried out on Perkin-Elmer Clarus 400 GC
equipped flame ionization detector with a capillary column (Elite-1 30 m times 032 mm
times 025 μm) using the external standard method A GCMS-QP 2010 instrument (Rtx-
17 30 m times 25 mm id film thickness 025 μm df) (column flow 2 mL minminus1
80-240
degC at 10 degCmin rise) The 1H NMR spectra were recorded on Varian-300 MHz FT-
NMR spectrometer in CDCl3 using TMS as the internal standard The 13
C NMR
spectra were recorded with a JEOL FT-NMR model-AL300 (75 MHz) spectrometer
in CDCl3 Chemical shifts are reported in parts per million (δ) relative to
tetramethylsilane as the internal standard J (coupling constant) values were reported
in hertz (Hz) Proton splitting patterns are described as s (singlet) d (doublet) t
(triplet) and m (multiplet)
542 Preparation of immobilized palladium metal ion-containing ionic liquid
1-methyl-3-(3-trimethoxysilylpropyl) imidazolium chloride was synthesized by
mixing N-methylimidazole (0690 mol) and 3-trimethoxysilylpropyl chloride (0690
mol) in a dry 300 mL flask under a nitrogen atmosphere and refluxed for 48 h After
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
240
cooling to room temperature the resultant liquid was washed by dehydrated ethyl
acetate five times and dried at room temperature under reduced pressure for 48 h
The obtained compound was stored at 253 K under dry nitrogen Silica (Aerosil 300
surface area 300 m2g calcined at 573 K for 15 h in air) and 1-methyl-3-(3-
trimethoxysilylpropyl) imidazolium chloride (weight ratio 11) was dispersed in
dehydrated toluene and the mixture was refluxed for 48 h under nitrogen
After the reflux toluene was removed by filtration using glass filter and the
excess ionic liquid was removed by washing with dichloromethane several times The
resultant solid is denoted as Imm-IL In the next step Imm-IL was added to an
acetonitrile solution of PdCl2 and refluxed for 24 h Acetonitrile and excess of metal
chloride were removed by washing acetone using glass filter several times The metal
loading of ImmPd-IL was 34 wt as determined by XRF measurements (SEA-2010
Seiko Electronic Industrial Co)
543 General Experimental Procedure for Alkoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
and Et3N (3 mmol) were added The autoclave was closed purged three times with
carbon monoxide pressurized with 73 psi of CO and heated at 80 degC for 3 h After
completion of the reaction the reactor was cooled to room temperature and the
remaining CO gas was carefully vented and the reactor was opened The reactor
vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to remove any traces of
product and catalyst if present The catalyst was filtered and the reaction mixture was
evaporated under vacuum The residue obtained was purified by column
chromatography (silica gel 60-120 mesh petroleum etherethyl acetate 9505) to
afford the desired product
544 General Experimental Procedure for Recycling of ImmPd-IL
After completion of reaction the reaction mixture was cooled to room temperature
and the catalyst was collected by filtration The filtered catalyst was washed with
distilled water (3 times 5 mL) and methanol (3 times 5 mL) to remove all traces of product or
reactant present The filtered catalyst was then dried under reduced pressure The
dried catalyst was then used for the alkoxycarbonylation reaction of iodobenzene with
methanol for the recyclability experiment
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
241
545 XPS spectra of ImmPd-IL catalyst
The XPS spectra of ImmPd-IL shows that two peaks at 337 and 3424 eV for fresh
Imm-Pd are assigned as 3d52 and 3d32 for Pd2+
species respectively (Figure 53)
For the first recycle sample new peaks appear at 3342 and 3392 eV which are
assigned as 3d52 and 3d32 for Pd(0) species respectively indicating that the
reduction of the Pd species takes place during the catalytic reaction From the
spectrum of the fourth recycle sample it is obvious that the component of Pd2+
is
decreasing upon recycles although the component of Pd(0) remains constant
Figure 53 XPS of Pd 3d and Cl 2p for ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
242
546 General Experimental Procedure for Phenoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h After the completion of the reaction the reactor was cooled to room
temperature and the remaining CO gas was carefully vented and the reactor was
opened The reactor vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to
remove any traces of product and catalyst if present The catalyst was filtered and the
reaction mixture was evaporated under vacuum The residue obtained was purified by
column chromatography (silica gel 60-120 mesh petroleum etherethyl acetate
9505) to afford the desired product
547 General Experimental Procedure for Aminocarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol)
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h (the ensuing procedure is the same as that discussed above for the phenoxy
carbonylation reaction)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
243
55 SPECTRAL DATA
Methyl benzoate
GC-MS (EI 70 eV) mz () = 136 [M+] (35) 105 (100) 77 (55) 51 (20)
Ethyl benzoate
GC-MS (EI 70 eV) mz () = 150 [M+] (21) 122 (30) 105 (100) 77 (55)
Benzyl benzoate
1H NMR (300 MHz CDCl3) δ 804-808 (m 2H ArH) 731-752 (m 8H
ArH) 53 (s 2H CH2) 13
C NMR (75 MHz CDCl3) δ 16648 13619 13312
13025 12981 12870 12848 12834 12827 6677
Methyl 4-aminobenzoate
1H NMR (300 MHz CDCl3) δ 783 (d 2H J = 87 Hz ArH) 661 (d 2H J =
87 Hz ArH) 414 (br s 2H NH2) 383 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16724 15107 13151 11927 11368 5155
Methyl 4-hydroxybenzoate
1H NMR (300 MHz CDCl3) δ 794 (d 2H J = 87 Hz ArH) 722 (br s 1H
OH) 690 (d 2H J = 87 Hz ArH) 390 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16778 16055 13203 12201 11539 5223
Methyl 2-naphthoate
1H NMR (300 MHz CDCl3) δ 850 (s 1H ArH) 798-805 (m 2H ArH)
773 (t 2H J = 84 Hz ArH) 754-761 (m 2H ArH) 396 (s 3H OCH3) 13
C NMR
(75 MHz CDCl3) δ 16685 13634 13087 13082 13013 12938 12901 12778
12720 12632 12260 5235
Ethyl 4-acetylbenzoate
1H NMR (300 MHz CDCl3) δ 814-811 (m 2H ArH) 802-799 (m 2H
ArH) 441 (q 2H J = 69Hz CH2CH3) 265 (s 3H COCH3) 142 (t 3H J = 69Hz
CH2CH3) 13
C NMR (75 MHz CDCl3) δ 19766 16576 14012 13424 12977
12817 6147 2689 1427
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
244
Phenyl benzoate
1H NMR (300 MHz CDCl3) δ 825-822 (m 2H ArH) 768-863 (m 1H
ArH) 756-742 (m 4H ArH) 732-723 (m 3H ArH) 13
C NMR (75 MHz CDCl3)
δ 16590 15103 13365 13023 12964 12956 12864 12596 1217 GC-MS (EI
70 eV) mz () = 198 [M+] (9) 105 (100) 77 (40) 51 (9)
phenyl 4-nitrobenzoate
1H NMR (300 MHz CDCl3) δ = 837 (s 4H ArH) 723-748 (m 5H ArH)
13C NMR (75 MHz CDCl3) δ = 16347 15110 15072 13517 13144 12984
12657 12388 12157 GC-MS (EI 70 eV) mz () = 243 [M+] (15) 150 (100) 77
(10)
phenyl 4-methoxybenzoate
1H NMR (300 MHz CDCl3) δ = 814-816 (d 2H J = 87Hz ArH) 720-741
(m 5H ArH) 696-698 (d 2H J = 87 Hz ArH) 386 (s 3H OCH3) GC-MS (EI
70 eV) mz () = 228 [M+] (5) 135 (100) 107 (9) 77 (20)
phenyl-1-naphthoate
1H NMR (300 MHz CDCl3) δ = 904 (d 1H ArH) 845 (d1H ArH) 804
(d 1H ArH) 788 (d 1H ArH) 742-763 (m 5H ArH) 726-728 (m 3H ArH)
13C NMR (70 MHz CDCl3) δ = 16594 15118 13440 13408 13182 13134
12968 12883 12850 12829 12650 12605 12590 12465 12203
N-phenylbenzamide
1H NMR (300 MHz CDCl3) δ 798 (br s 1H NH) 787-883 (m 2H ArH)
763 (d 2H J = 76 Hz ArH) 732-753 (m 5H ArH) 716 (t 1H J = 73 ArH) 13
C
NMR (75 MHz CDCl3) δ 16590 13798 13502 13186 12911 12880 12709
12461 12032 ppm GC-MS mz () = 197 [M+] (42) 105 (100) 77 (54)
4-acetyl-N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 806 (d 2H J = 84Hz ArH) 777 (d 2H J
= 84Hz ArH) 601 (br s 1H NH) 393 (s 3H CH3) 148 (s 9H) 13
C NMR (75
MHz CDCl3) δ 16640 16605 13987 13234 12979 12682 5239 5195 2883
ppm GC-MS (EI 70 eV) mz () = 219 [M+] (20) 186 (22) 148 (100) 130 (30) 76
(20)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
235
524 AMINOCARBONYLATION REACTIONS
The scope of ImmPd-IL was further extended for aminocarbonylation of aryl iodides
with a range of aliphatic aromatic primary and secondary amines (Scheme 527)
Scheme 527 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with amines
The reaction of iodobenzene with aniline was selected as a model reaction for
optimization Various solvents such as DMF (80) water (70) anisole (60) and
toluene (92) were screened for the reaction (ionic liquid was insoluble in water as it
was immobilised on solid support) but toluene was found to be the best solvent
(Table 55 entries 1-4) Screening of a variety of bases showed Et3N (90) to be
superior at 100 degC (Table 55 entries 4-6) Further reaction was optimized with
respect to various reaction parameters including temperature time and CO pressure
and the best optimized reaction conditions were then applied for the
aminocarbonylation of a variety of iodoaryls and amines
Table 55 Effect of solvents and bases on ImmPd-IL catalyzed aminocarbonylation
reactiona
Entry Solvent Base Yield
()b
1 DMF Et3N 80
2 Water Et3N 70
3
Anisole Et3N 60
4 Toluene Et3N 92
5 Toluene Na2CO3 52
6 Toluene K2CO3 57
a Reaction conditions
Iodobenzene (1 mmol) aniline (2 mmol) ImmPd-IL (2 mol)
Et3N (3 mmol) Toluene (10 mL) 8 h at 100 degC 145 psi CO pressure b Yield based GC analysis
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
236
The optimized reaction parameters were then applied for the
aminocarbonylation of substituted aryl halides and aromatic amines The model
reaction of iodobenzene with aniline provided 90 isolated yield of N-
phenylbenzamide under optimized reaction conditions (Table 56 entry 1) 4-
iodoanisole furnished 85 yield of 4-methoxy-N-phenylbenzamide (Table 56 entries
2) 4-methoxyaniline reacts with iodobenzene and provided 88 yield of N-(4-
methoxyphenyl)benzamide (Table 56 entry 3) 3-(Trifluoromethyl)aniline provided a
moderate yield of the expected product (Table 56 entry 4)
There after various primary aliphatic amines were screened for the
aminocarbonylation Cyclohexyl amine efficiently reacts with iodobenzene and 2-
iodonaphthalene and provided 92 and 80 yield of N-cyclohexylbenzamide and N-
cyclohexyl-1-naphthamide respectively (Table 56 entries 5-6) Reaction of
iodobenzene and 4-iodo acetophenone with tert-butyl amine furnished 92 and 89
yield of respective amide (Table 56 entry 7-8) Benzyl amine provided excellent
yields of N-benzylbenzamide (Table 56 entry 9) To our delight aromatic secondary
amine such as N-methyl aniline efficiently reacts with iodobenzene furnishing 91
yield of N-methyl-N-phenylbenzamide (Table 56 entry 10)
Table 56 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with various
aliphatic and aromatic primary amines and secondary aminesa
Entry Aryl iodide Amine Product Yield
()b
1
90
2
85
3
88
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
237
4
75
5
92
6
80
7
92
8
89
9
90
10
91
a Reaction conditions aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
238
53 CONCLUSION
The present study reports an efficient and common protocol for
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
by using a well-defined heterogeneous ImmPd-IL complex as a versatile
catalyst
The ease of preparation of the complex indefinite shelf life stability towards
air makes it an ideal complex for the above transformations
The reaction system was optimized with respect to various reaction parameters
and applied for carbonylation of a range of aryl iodides with different types of
alcohols phenols and amines furnishing good to excellent yields of the
corresponding products
The present protocol provided high yields of the desired products for all
carbonylation protocols
All the reactions were carried out under milder operating conditions
Catalytic system showed excellent activity and selectivity and effectively
recycled for four consecutive cycles
The leaching of the Pd metal was examined by hot filteration test and ICP-
AES analysis which revels no significant leaching of the palladium occurs
during the reaction
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
239
54 EXPERIMENTAL
541 Materials and Method N-methylimidazole (99+) and 3-trimethoxysilylpropyl
chloride (97+) were purchased from Aldrich PdCl2 was purchased from WAKO
Anhydrous redistilled 1-methylimidazole (99+) was purchased from Aldrich All
the dehydrated solvents were obtained from WAKO Aerosil 300 (300 m2g) was
obtained from Japan Aerosil Co and calcined at 573 K for 15 h in air and 30 min in
vacuum before use as a support The procedures for catalyst preparation were based
previous publication (Sasaki et al 2008) with some modifications Prepared catalyst
was characterized by using IR and elemental analysis and loading of the catalyst was
calculated by XRF measurements (SEA-2010 Seiko Electronic Industrial Co) The
XPS of ImmPd-IL was measured using a PHI5000 Versa Probe with monochromatic
focused (100 times 100 μm) Al Kα X-ray radiation (15 kV 30 mA) and dual beam
neutralization using a combination of argon ion gun and electron irradiation
The products are well-known in the literature and were compared with
authentic samples Progress of the reaction was monitored by gas chromatography
(GC) Gas chromatography analysis was carried out on Perkin-Elmer Clarus 400 GC
equipped flame ionization detector with a capillary column (Elite-1 30 m times 032 mm
times 025 μm) using the external standard method A GCMS-QP 2010 instrument (Rtx-
17 30 m times 25 mm id film thickness 025 μm df) (column flow 2 mL minminus1
80-240
degC at 10 degCmin rise) The 1H NMR spectra were recorded on Varian-300 MHz FT-
NMR spectrometer in CDCl3 using TMS as the internal standard The 13
C NMR
spectra were recorded with a JEOL FT-NMR model-AL300 (75 MHz) spectrometer
in CDCl3 Chemical shifts are reported in parts per million (δ) relative to
tetramethylsilane as the internal standard J (coupling constant) values were reported
in hertz (Hz) Proton splitting patterns are described as s (singlet) d (doublet) t
(triplet) and m (multiplet)
542 Preparation of immobilized palladium metal ion-containing ionic liquid
1-methyl-3-(3-trimethoxysilylpropyl) imidazolium chloride was synthesized by
mixing N-methylimidazole (0690 mol) and 3-trimethoxysilylpropyl chloride (0690
mol) in a dry 300 mL flask under a nitrogen atmosphere and refluxed for 48 h After
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
240
cooling to room temperature the resultant liquid was washed by dehydrated ethyl
acetate five times and dried at room temperature under reduced pressure for 48 h
The obtained compound was stored at 253 K under dry nitrogen Silica (Aerosil 300
surface area 300 m2g calcined at 573 K for 15 h in air) and 1-methyl-3-(3-
trimethoxysilylpropyl) imidazolium chloride (weight ratio 11) was dispersed in
dehydrated toluene and the mixture was refluxed for 48 h under nitrogen
After the reflux toluene was removed by filtration using glass filter and the
excess ionic liquid was removed by washing with dichloromethane several times The
resultant solid is denoted as Imm-IL In the next step Imm-IL was added to an
acetonitrile solution of PdCl2 and refluxed for 24 h Acetonitrile and excess of metal
chloride were removed by washing acetone using glass filter several times The metal
loading of ImmPd-IL was 34 wt as determined by XRF measurements (SEA-2010
Seiko Electronic Industrial Co)
543 General Experimental Procedure for Alkoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
and Et3N (3 mmol) were added The autoclave was closed purged three times with
carbon monoxide pressurized with 73 psi of CO and heated at 80 degC for 3 h After
completion of the reaction the reactor was cooled to room temperature and the
remaining CO gas was carefully vented and the reactor was opened The reactor
vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to remove any traces of
product and catalyst if present The catalyst was filtered and the reaction mixture was
evaporated under vacuum The residue obtained was purified by column
chromatography (silica gel 60-120 mesh petroleum etherethyl acetate 9505) to
afford the desired product
544 General Experimental Procedure for Recycling of ImmPd-IL
After completion of reaction the reaction mixture was cooled to room temperature
and the catalyst was collected by filtration The filtered catalyst was washed with
distilled water (3 times 5 mL) and methanol (3 times 5 mL) to remove all traces of product or
reactant present The filtered catalyst was then dried under reduced pressure The
dried catalyst was then used for the alkoxycarbonylation reaction of iodobenzene with
methanol for the recyclability experiment
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
241
545 XPS spectra of ImmPd-IL catalyst
The XPS spectra of ImmPd-IL shows that two peaks at 337 and 3424 eV for fresh
Imm-Pd are assigned as 3d52 and 3d32 for Pd2+
species respectively (Figure 53)
For the first recycle sample new peaks appear at 3342 and 3392 eV which are
assigned as 3d52 and 3d32 for Pd(0) species respectively indicating that the
reduction of the Pd species takes place during the catalytic reaction From the
spectrum of the fourth recycle sample it is obvious that the component of Pd2+
is
decreasing upon recycles although the component of Pd(0) remains constant
Figure 53 XPS of Pd 3d and Cl 2p for ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
242
546 General Experimental Procedure for Phenoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h After the completion of the reaction the reactor was cooled to room
temperature and the remaining CO gas was carefully vented and the reactor was
opened The reactor vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to
remove any traces of product and catalyst if present The catalyst was filtered and the
reaction mixture was evaporated under vacuum The residue obtained was purified by
column chromatography (silica gel 60-120 mesh petroleum etherethyl acetate
9505) to afford the desired product
547 General Experimental Procedure for Aminocarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol)
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h (the ensuing procedure is the same as that discussed above for the phenoxy
carbonylation reaction)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
243
55 SPECTRAL DATA
Methyl benzoate
GC-MS (EI 70 eV) mz () = 136 [M+] (35) 105 (100) 77 (55) 51 (20)
Ethyl benzoate
GC-MS (EI 70 eV) mz () = 150 [M+] (21) 122 (30) 105 (100) 77 (55)
Benzyl benzoate
1H NMR (300 MHz CDCl3) δ 804-808 (m 2H ArH) 731-752 (m 8H
ArH) 53 (s 2H CH2) 13
C NMR (75 MHz CDCl3) δ 16648 13619 13312
13025 12981 12870 12848 12834 12827 6677
Methyl 4-aminobenzoate
1H NMR (300 MHz CDCl3) δ 783 (d 2H J = 87 Hz ArH) 661 (d 2H J =
87 Hz ArH) 414 (br s 2H NH2) 383 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16724 15107 13151 11927 11368 5155
Methyl 4-hydroxybenzoate
1H NMR (300 MHz CDCl3) δ 794 (d 2H J = 87 Hz ArH) 722 (br s 1H
OH) 690 (d 2H J = 87 Hz ArH) 390 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16778 16055 13203 12201 11539 5223
Methyl 2-naphthoate
1H NMR (300 MHz CDCl3) δ 850 (s 1H ArH) 798-805 (m 2H ArH)
773 (t 2H J = 84 Hz ArH) 754-761 (m 2H ArH) 396 (s 3H OCH3) 13
C NMR
(75 MHz CDCl3) δ 16685 13634 13087 13082 13013 12938 12901 12778
12720 12632 12260 5235
Ethyl 4-acetylbenzoate
1H NMR (300 MHz CDCl3) δ 814-811 (m 2H ArH) 802-799 (m 2H
ArH) 441 (q 2H J = 69Hz CH2CH3) 265 (s 3H COCH3) 142 (t 3H J = 69Hz
CH2CH3) 13
C NMR (75 MHz CDCl3) δ 19766 16576 14012 13424 12977
12817 6147 2689 1427
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
244
Phenyl benzoate
1H NMR (300 MHz CDCl3) δ 825-822 (m 2H ArH) 768-863 (m 1H
ArH) 756-742 (m 4H ArH) 732-723 (m 3H ArH) 13
C NMR (75 MHz CDCl3)
δ 16590 15103 13365 13023 12964 12956 12864 12596 1217 GC-MS (EI
70 eV) mz () = 198 [M+] (9) 105 (100) 77 (40) 51 (9)
phenyl 4-nitrobenzoate
1H NMR (300 MHz CDCl3) δ = 837 (s 4H ArH) 723-748 (m 5H ArH)
13C NMR (75 MHz CDCl3) δ = 16347 15110 15072 13517 13144 12984
12657 12388 12157 GC-MS (EI 70 eV) mz () = 243 [M+] (15) 150 (100) 77
(10)
phenyl 4-methoxybenzoate
1H NMR (300 MHz CDCl3) δ = 814-816 (d 2H J = 87Hz ArH) 720-741
(m 5H ArH) 696-698 (d 2H J = 87 Hz ArH) 386 (s 3H OCH3) GC-MS (EI
70 eV) mz () = 228 [M+] (5) 135 (100) 107 (9) 77 (20)
phenyl-1-naphthoate
1H NMR (300 MHz CDCl3) δ = 904 (d 1H ArH) 845 (d1H ArH) 804
(d 1H ArH) 788 (d 1H ArH) 742-763 (m 5H ArH) 726-728 (m 3H ArH)
13C NMR (70 MHz CDCl3) δ = 16594 15118 13440 13408 13182 13134
12968 12883 12850 12829 12650 12605 12590 12465 12203
N-phenylbenzamide
1H NMR (300 MHz CDCl3) δ 798 (br s 1H NH) 787-883 (m 2H ArH)
763 (d 2H J = 76 Hz ArH) 732-753 (m 5H ArH) 716 (t 1H J = 73 ArH) 13
C
NMR (75 MHz CDCl3) δ 16590 13798 13502 13186 12911 12880 12709
12461 12032 ppm GC-MS mz () = 197 [M+] (42) 105 (100) 77 (54)
4-acetyl-N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 806 (d 2H J = 84Hz ArH) 777 (d 2H J
= 84Hz ArH) 601 (br s 1H NH) 393 (s 3H CH3) 148 (s 9H) 13
C NMR (75
MHz CDCl3) δ 16640 16605 13987 13234 12979 12682 5239 5195 2883
ppm GC-MS (EI 70 eV) mz () = 219 [M+] (20) 186 (22) 148 (100) 130 (30) 76
(20)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
236
The optimized reaction parameters were then applied for the
aminocarbonylation of substituted aryl halides and aromatic amines The model
reaction of iodobenzene with aniline provided 90 isolated yield of N-
phenylbenzamide under optimized reaction conditions (Table 56 entry 1) 4-
iodoanisole furnished 85 yield of 4-methoxy-N-phenylbenzamide (Table 56 entries
2) 4-methoxyaniline reacts with iodobenzene and provided 88 yield of N-(4-
methoxyphenyl)benzamide (Table 56 entry 3) 3-(Trifluoromethyl)aniline provided a
moderate yield of the expected product (Table 56 entry 4)
There after various primary aliphatic amines were screened for the
aminocarbonylation Cyclohexyl amine efficiently reacts with iodobenzene and 2-
iodonaphthalene and provided 92 and 80 yield of N-cyclohexylbenzamide and N-
cyclohexyl-1-naphthamide respectively (Table 56 entries 5-6) Reaction of
iodobenzene and 4-iodo acetophenone with tert-butyl amine furnished 92 and 89
yield of respective amide (Table 56 entry 7-8) Benzyl amine provided excellent
yields of N-benzylbenzamide (Table 56 entry 9) To our delight aromatic secondary
amine such as N-methyl aniline efficiently reacts with iodobenzene furnishing 91
yield of N-methyl-N-phenylbenzamide (Table 56 entry 10)
Table 56 ImmPd-IL catalyzed aminocarbonylation of aryl iodides with various
aliphatic and aromatic primary amines and secondary aminesa
Entry Aryl iodide Amine Product Yield
()b
1
90
2
85
3
88
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
237
4
75
5
92
6
80
7
92
8
89
9
90
10
91
a Reaction conditions aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
238
53 CONCLUSION
The present study reports an efficient and common protocol for
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
by using a well-defined heterogeneous ImmPd-IL complex as a versatile
catalyst
The ease of preparation of the complex indefinite shelf life stability towards
air makes it an ideal complex for the above transformations
The reaction system was optimized with respect to various reaction parameters
and applied for carbonylation of a range of aryl iodides with different types of
alcohols phenols and amines furnishing good to excellent yields of the
corresponding products
The present protocol provided high yields of the desired products for all
carbonylation protocols
All the reactions were carried out under milder operating conditions
Catalytic system showed excellent activity and selectivity and effectively
recycled for four consecutive cycles
The leaching of the Pd metal was examined by hot filteration test and ICP-
AES analysis which revels no significant leaching of the palladium occurs
during the reaction
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
239
54 EXPERIMENTAL
541 Materials and Method N-methylimidazole (99+) and 3-trimethoxysilylpropyl
chloride (97+) were purchased from Aldrich PdCl2 was purchased from WAKO
Anhydrous redistilled 1-methylimidazole (99+) was purchased from Aldrich All
the dehydrated solvents were obtained from WAKO Aerosil 300 (300 m2g) was
obtained from Japan Aerosil Co and calcined at 573 K for 15 h in air and 30 min in
vacuum before use as a support The procedures for catalyst preparation were based
previous publication (Sasaki et al 2008) with some modifications Prepared catalyst
was characterized by using IR and elemental analysis and loading of the catalyst was
calculated by XRF measurements (SEA-2010 Seiko Electronic Industrial Co) The
XPS of ImmPd-IL was measured using a PHI5000 Versa Probe with monochromatic
focused (100 times 100 μm) Al Kα X-ray radiation (15 kV 30 mA) and dual beam
neutralization using a combination of argon ion gun and electron irradiation
The products are well-known in the literature and were compared with
authentic samples Progress of the reaction was monitored by gas chromatography
(GC) Gas chromatography analysis was carried out on Perkin-Elmer Clarus 400 GC
equipped flame ionization detector with a capillary column (Elite-1 30 m times 032 mm
times 025 μm) using the external standard method A GCMS-QP 2010 instrument (Rtx-
17 30 m times 25 mm id film thickness 025 μm df) (column flow 2 mL minminus1
80-240
degC at 10 degCmin rise) The 1H NMR spectra were recorded on Varian-300 MHz FT-
NMR spectrometer in CDCl3 using TMS as the internal standard The 13
C NMR
spectra were recorded with a JEOL FT-NMR model-AL300 (75 MHz) spectrometer
in CDCl3 Chemical shifts are reported in parts per million (δ) relative to
tetramethylsilane as the internal standard J (coupling constant) values were reported
in hertz (Hz) Proton splitting patterns are described as s (singlet) d (doublet) t
(triplet) and m (multiplet)
542 Preparation of immobilized palladium metal ion-containing ionic liquid
1-methyl-3-(3-trimethoxysilylpropyl) imidazolium chloride was synthesized by
mixing N-methylimidazole (0690 mol) and 3-trimethoxysilylpropyl chloride (0690
mol) in a dry 300 mL flask under a nitrogen atmosphere and refluxed for 48 h After
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
240
cooling to room temperature the resultant liquid was washed by dehydrated ethyl
acetate five times and dried at room temperature under reduced pressure for 48 h
The obtained compound was stored at 253 K under dry nitrogen Silica (Aerosil 300
surface area 300 m2g calcined at 573 K for 15 h in air) and 1-methyl-3-(3-
trimethoxysilylpropyl) imidazolium chloride (weight ratio 11) was dispersed in
dehydrated toluene and the mixture was refluxed for 48 h under nitrogen
After the reflux toluene was removed by filtration using glass filter and the
excess ionic liquid was removed by washing with dichloromethane several times The
resultant solid is denoted as Imm-IL In the next step Imm-IL was added to an
acetonitrile solution of PdCl2 and refluxed for 24 h Acetonitrile and excess of metal
chloride were removed by washing acetone using glass filter several times The metal
loading of ImmPd-IL was 34 wt as determined by XRF measurements (SEA-2010
Seiko Electronic Industrial Co)
543 General Experimental Procedure for Alkoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
and Et3N (3 mmol) were added The autoclave was closed purged three times with
carbon monoxide pressurized with 73 psi of CO and heated at 80 degC for 3 h After
completion of the reaction the reactor was cooled to room temperature and the
remaining CO gas was carefully vented and the reactor was opened The reactor
vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to remove any traces of
product and catalyst if present The catalyst was filtered and the reaction mixture was
evaporated under vacuum The residue obtained was purified by column
chromatography (silica gel 60-120 mesh petroleum etherethyl acetate 9505) to
afford the desired product
544 General Experimental Procedure for Recycling of ImmPd-IL
After completion of reaction the reaction mixture was cooled to room temperature
and the catalyst was collected by filtration The filtered catalyst was washed with
distilled water (3 times 5 mL) and methanol (3 times 5 mL) to remove all traces of product or
reactant present The filtered catalyst was then dried under reduced pressure The
dried catalyst was then used for the alkoxycarbonylation reaction of iodobenzene with
methanol for the recyclability experiment
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
241
545 XPS spectra of ImmPd-IL catalyst
The XPS spectra of ImmPd-IL shows that two peaks at 337 and 3424 eV for fresh
Imm-Pd are assigned as 3d52 and 3d32 for Pd2+
species respectively (Figure 53)
For the first recycle sample new peaks appear at 3342 and 3392 eV which are
assigned as 3d52 and 3d32 for Pd(0) species respectively indicating that the
reduction of the Pd species takes place during the catalytic reaction From the
spectrum of the fourth recycle sample it is obvious that the component of Pd2+
is
decreasing upon recycles although the component of Pd(0) remains constant
Figure 53 XPS of Pd 3d and Cl 2p for ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
242
546 General Experimental Procedure for Phenoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h After the completion of the reaction the reactor was cooled to room
temperature and the remaining CO gas was carefully vented and the reactor was
opened The reactor vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to
remove any traces of product and catalyst if present The catalyst was filtered and the
reaction mixture was evaporated under vacuum The residue obtained was purified by
column chromatography (silica gel 60-120 mesh petroleum etherethyl acetate
9505) to afford the desired product
547 General Experimental Procedure for Aminocarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol)
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h (the ensuing procedure is the same as that discussed above for the phenoxy
carbonylation reaction)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
243
55 SPECTRAL DATA
Methyl benzoate
GC-MS (EI 70 eV) mz () = 136 [M+] (35) 105 (100) 77 (55) 51 (20)
Ethyl benzoate
GC-MS (EI 70 eV) mz () = 150 [M+] (21) 122 (30) 105 (100) 77 (55)
Benzyl benzoate
1H NMR (300 MHz CDCl3) δ 804-808 (m 2H ArH) 731-752 (m 8H
ArH) 53 (s 2H CH2) 13
C NMR (75 MHz CDCl3) δ 16648 13619 13312
13025 12981 12870 12848 12834 12827 6677
Methyl 4-aminobenzoate
1H NMR (300 MHz CDCl3) δ 783 (d 2H J = 87 Hz ArH) 661 (d 2H J =
87 Hz ArH) 414 (br s 2H NH2) 383 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16724 15107 13151 11927 11368 5155
Methyl 4-hydroxybenzoate
1H NMR (300 MHz CDCl3) δ 794 (d 2H J = 87 Hz ArH) 722 (br s 1H
OH) 690 (d 2H J = 87 Hz ArH) 390 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16778 16055 13203 12201 11539 5223
Methyl 2-naphthoate
1H NMR (300 MHz CDCl3) δ 850 (s 1H ArH) 798-805 (m 2H ArH)
773 (t 2H J = 84 Hz ArH) 754-761 (m 2H ArH) 396 (s 3H OCH3) 13
C NMR
(75 MHz CDCl3) δ 16685 13634 13087 13082 13013 12938 12901 12778
12720 12632 12260 5235
Ethyl 4-acetylbenzoate
1H NMR (300 MHz CDCl3) δ 814-811 (m 2H ArH) 802-799 (m 2H
ArH) 441 (q 2H J = 69Hz CH2CH3) 265 (s 3H COCH3) 142 (t 3H J = 69Hz
CH2CH3) 13
C NMR (75 MHz CDCl3) δ 19766 16576 14012 13424 12977
12817 6147 2689 1427
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
244
Phenyl benzoate
1H NMR (300 MHz CDCl3) δ 825-822 (m 2H ArH) 768-863 (m 1H
ArH) 756-742 (m 4H ArH) 732-723 (m 3H ArH) 13
C NMR (75 MHz CDCl3)
δ 16590 15103 13365 13023 12964 12956 12864 12596 1217 GC-MS (EI
70 eV) mz () = 198 [M+] (9) 105 (100) 77 (40) 51 (9)
phenyl 4-nitrobenzoate
1H NMR (300 MHz CDCl3) δ = 837 (s 4H ArH) 723-748 (m 5H ArH)
13C NMR (75 MHz CDCl3) δ = 16347 15110 15072 13517 13144 12984
12657 12388 12157 GC-MS (EI 70 eV) mz () = 243 [M+] (15) 150 (100) 77
(10)
phenyl 4-methoxybenzoate
1H NMR (300 MHz CDCl3) δ = 814-816 (d 2H J = 87Hz ArH) 720-741
(m 5H ArH) 696-698 (d 2H J = 87 Hz ArH) 386 (s 3H OCH3) GC-MS (EI
70 eV) mz () = 228 [M+] (5) 135 (100) 107 (9) 77 (20)
phenyl-1-naphthoate
1H NMR (300 MHz CDCl3) δ = 904 (d 1H ArH) 845 (d1H ArH) 804
(d 1H ArH) 788 (d 1H ArH) 742-763 (m 5H ArH) 726-728 (m 3H ArH)
13C NMR (70 MHz CDCl3) δ = 16594 15118 13440 13408 13182 13134
12968 12883 12850 12829 12650 12605 12590 12465 12203
N-phenylbenzamide
1H NMR (300 MHz CDCl3) δ 798 (br s 1H NH) 787-883 (m 2H ArH)
763 (d 2H J = 76 Hz ArH) 732-753 (m 5H ArH) 716 (t 1H J = 73 ArH) 13
C
NMR (75 MHz CDCl3) δ 16590 13798 13502 13186 12911 12880 12709
12461 12032 ppm GC-MS mz () = 197 [M+] (42) 105 (100) 77 (54)
4-acetyl-N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 806 (d 2H J = 84Hz ArH) 777 (d 2H J
= 84Hz ArH) 601 (br s 1H NH) 393 (s 3H CH3) 148 (s 9H) 13
C NMR (75
MHz CDCl3) δ 16640 16605 13987 13234 12979 12682 5239 5195 2883
ppm GC-MS (EI 70 eV) mz () = 219 [M+] (20) 186 (22) 148 (100) 130 (30) 76
(20)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
237
4
75
5
92
6
80
7
92
8
89
9
90
10
91
a Reaction conditions aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol )
Et3N (3 mmol) toluene (10 mL) 145 psi CO press Temp (100 degC) Time (8 h) b Isolated yield
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
238
53 CONCLUSION
The present study reports an efficient and common protocol for
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
by using a well-defined heterogeneous ImmPd-IL complex as a versatile
catalyst
The ease of preparation of the complex indefinite shelf life stability towards
air makes it an ideal complex for the above transformations
The reaction system was optimized with respect to various reaction parameters
and applied for carbonylation of a range of aryl iodides with different types of
alcohols phenols and amines furnishing good to excellent yields of the
corresponding products
The present protocol provided high yields of the desired products for all
carbonylation protocols
All the reactions were carried out under milder operating conditions
Catalytic system showed excellent activity and selectivity and effectively
recycled for four consecutive cycles
The leaching of the Pd metal was examined by hot filteration test and ICP-
AES analysis which revels no significant leaching of the palladium occurs
during the reaction
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
239
54 EXPERIMENTAL
541 Materials and Method N-methylimidazole (99+) and 3-trimethoxysilylpropyl
chloride (97+) were purchased from Aldrich PdCl2 was purchased from WAKO
Anhydrous redistilled 1-methylimidazole (99+) was purchased from Aldrich All
the dehydrated solvents were obtained from WAKO Aerosil 300 (300 m2g) was
obtained from Japan Aerosil Co and calcined at 573 K for 15 h in air and 30 min in
vacuum before use as a support The procedures for catalyst preparation were based
previous publication (Sasaki et al 2008) with some modifications Prepared catalyst
was characterized by using IR and elemental analysis and loading of the catalyst was
calculated by XRF measurements (SEA-2010 Seiko Electronic Industrial Co) The
XPS of ImmPd-IL was measured using a PHI5000 Versa Probe with monochromatic
focused (100 times 100 μm) Al Kα X-ray radiation (15 kV 30 mA) and dual beam
neutralization using a combination of argon ion gun and electron irradiation
The products are well-known in the literature and were compared with
authentic samples Progress of the reaction was monitored by gas chromatography
(GC) Gas chromatography analysis was carried out on Perkin-Elmer Clarus 400 GC
equipped flame ionization detector with a capillary column (Elite-1 30 m times 032 mm
times 025 μm) using the external standard method A GCMS-QP 2010 instrument (Rtx-
17 30 m times 25 mm id film thickness 025 μm df) (column flow 2 mL minminus1
80-240
degC at 10 degCmin rise) The 1H NMR spectra were recorded on Varian-300 MHz FT-
NMR spectrometer in CDCl3 using TMS as the internal standard The 13
C NMR
spectra were recorded with a JEOL FT-NMR model-AL300 (75 MHz) spectrometer
in CDCl3 Chemical shifts are reported in parts per million (δ) relative to
tetramethylsilane as the internal standard J (coupling constant) values were reported
in hertz (Hz) Proton splitting patterns are described as s (singlet) d (doublet) t
(triplet) and m (multiplet)
542 Preparation of immobilized palladium metal ion-containing ionic liquid
1-methyl-3-(3-trimethoxysilylpropyl) imidazolium chloride was synthesized by
mixing N-methylimidazole (0690 mol) and 3-trimethoxysilylpropyl chloride (0690
mol) in a dry 300 mL flask under a nitrogen atmosphere and refluxed for 48 h After
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
240
cooling to room temperature the resultant liquid was washed by dehydrated ethyl
acetate five times and dried at room temperature under reduced pressure for 48 h
The obtained compound was stored at 253 K under dry nitrogen Silica (Aerosil 300
surface area 300 m2g calcined at 573 K for 15 h in air) and 1-methyl-3-(3-
trimethoxysilylpropyl) imidazolium chloride (weight ratio 11) was dispersed in
dehydrated toluene and the mixture was refluxed for 48 h under nitrogen
After the reflux toluene was removed by filtration using glass filter and the
excess ionic liquid was removed by washing with dichloromethane several times The
resultant solid is denoted as Imm-IL In the next step Imm-IL was added to an
acetonitrile solution of PdCl2 and refluxed for 24 h Acetonitrile and excess of metal
chloride were removed by washing acetone using glass filter several times The metal
loading of ImmPd-IL was 34 wt as determined by XRF measurements (SEA-2010
Seiko Electronic Industrial Co)
543 General Experimental Procedure for Alkoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
and Et3N (3 mmol) were added The autoclave was closed purged three times with
carbon monoxide pressurized with 73 psi of CO and heated at 80 degC for 3 h After
completion of the reaction the reactor was cooled to room temperature and the
remaining CO gas was carefully vented and the reactor was opened The reactor
vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to remove any traces of
product and catalyst if present The catalyst was filtered and the reaction mixture was
evaporated under vacuum The residue obtained was purified by column
chromatography (silica gel 60-120 mesh petroleum etherethyl acetate 9505) to
afford the desired product
544 General Experimental Procedure for Recycling of ImmPd-IL
After completion of reaction the reaction mixture was cooled to room temperature
and the catalyst was collected by filtration The filtered catalyst was washed with
distilled water (3 times 5 mL) and methanol (3 times 5 mL) to remove all traces of product or
reactant present The filtered catalyst was then dried under reduced pressure The
dried catalyst was then used for the alkoxycarbonylation reaction of iodobenzene with
methanol for the recyclability experiment
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
241
545 XPS spectra of ImmPd-IL catalyst
The XPS spectra of ImmPd-IL shows that two peaks at 337 and 3424 eV for fresh
Imm-Pd are assigned as 3d52 and 3d32 for Pd2+
species respectively (Figure 53)
For the first recycle sample new peaks appear at 3342 and 3392 eV which are
assigned as 3d52 and 3d32 for Pd(0) species respectively indicating that the
reduction of the Pd species takes place during the catalytic reaction From the
spectrum of the fourth recycle sample it is obvious that the component of Pd2+
is
decreasing upon recycles although the component of Pd(0) remains constant
Figure 53 XPS of Pd 3d and Cl 2p for ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
242
546 General Experimental Procedure for Phenoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h After the completion of the reaction the reactor was cooled to room
temperature and the remaining CO gas was carefully vented and the reactor was
opened The reactor vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to
remove any traces of product and catalyst if present The catalyst was filtered and the
reaction mixture was evaporated under vacuum The residue obtained was purified by
column chromatography (silica gel 60-120 mesh petroleum etherethyl acetate
9505) to afford the desired product
547 General Experimental Procedure for Aminocarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol)
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h (the ensuing procedure is the same as that discussed above for the phenoxy
carbonylation reaction)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
243
55 SPECTRAL DATA
Methyl benzoate
GC-MS (EI 70 eV) mz () = 136 [M+] (35) 105 (100) 77 (55) 51 (20)
Ethyl benzoate
GC-MS (EI 70 eV) mz () = 150 [M+] (21) 122 (30) 105 (100) 77 (55)
Benzyl benzoate
1H NMR (300 MHz CDCl3) δ 804-808 (m 2H ArH) 731-752 (m 8H
ArH) 53 (s 2H CH2) 13
C NMR (75 MHz CDCl3) δ 16648 13619 13312
13025 12981 12870 12848 12834 12827 6677
Methyl 4-aminobenzoate
1H NMR (300 MHz CDCl3) δ 783 (d 2H J = 87 Hz ArH) 661 (d 2H J =
87 Hz ArH) 414 (br s 2H NH2) 383 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16724 15107 13151 11927 11368 5155
Methyl 4-hydroxybenzoate
1H NMR (300 MHz CDCl3) δ 794 (d 2H J = 87 Hz ArH) 722 (br s 1H
OH) 690 (d 2H J = 87 Hz ArH) 390 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16778 16055 13203 12201 11539 5223
Methyl 2-naphthoate
1H NMR (300 MHz CDCl3) δ 850 (s 1H ArH) 798-805 (m 2H ArH)
773 (t 2H J = 84 Hz ArH) 754-761 (m 2H ArH) 396 (s 3H OCH3) 13
C NMR
(75 MHz CDCl3) δ 16685 13634 13087 13082 13013 12938 12901 12778
12720 12632 12260 5235
Ethyl 4-acetylbenzoate
1H NMR (300 MHz CDCl3) δ 814-811 (m 2H ArH) 802-799 (m 2H
ArH) 441 (q 2H J = 69Hz CH2CH3) 265 (s 3H COCH3) 142 (t 3H J = 69Hz
CH2CH3) 13
C NMR (75 MHz CDCl3) δ 19766 16576 14012 13424 12977
12817 6147 2689 1427
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
244
Phenyl benzoate
1H NMR (300 MHz CDCl3) δ 825-822 (m 2H ArH) 768-863 (m 1H
ArH) 756-742 (m 4H ArH) 732-723 (m 3H ArH) 13
C NMR (75 MHz CDCl3)
δ 16590 15103 13365 13023 12964 12956 12864 12596 1217 GC-MS (EI
70 eV) mz () = 198 [M+] (9) 105 (100) 77 (40) 51 (9)
phenyl 4-nitrobenzoate
1H NMR (300 MHz CDCl3) δ = 837 (s 4H ArH) 723-748 (m 5H ArH)
13C NMR (75 MHz CDCl3) δ = 16347 15110 15072 13517 13144 12984
12657 12388 12157 GC-MS (EI 70 eV) mz () = 243 [M+] (15) 150 (100) 77
(10)
phenyl 4-methoxybenzoate
1H NMR (300 MHz CDCl3) δ = 814-816 (d 2H J = 87Hz ArH) 720-741
(m 5H ArH) 696-698 (d 2H J = 87 Hz ArH) 386 (s 3H OCH3) GC-MS (EI
70 eV) mz () = 228 [M+] (5) 135 (100) 107 (9) 77 (20)
phenyl-1-naphthoate
1H NMR (300 MHz CDCl3) δ = 904 (d 1H ArH) 845 (d1H ArH) 804
(d 1H ArH) 788 (d 1H ArH) 742-763 (m 5H ArH) 726-728 (m 3H ArH)
13C NMR (70 MHz CDCl3) δ = 16594 15118 13440 13408 13182 13134
12968 12883 12850 12829 12650 12605 12590 12465 12203
N-phenylbenzamide
1H NMR (300 MHz CDCl3) δ 798 (br s 1H NH) 787-883 (m 2H ArH)
763 (d 2H J = 76 Hz ArH) 732-753 (m 5H ArH) 716 (t 1H J = 73 ArH) 13
C
NMR (75 MHz CDCl3) δ 16590 13798 13502 13186 12911 12880 12709
12461 12032 ppm GC-MS mz () = 197 [M+] (42) 105 (100) 77 (54)
4-acetyl-N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 806 (d 2H J = 84Hz ArH) 777 (d 2H J
= 84Hz ArH) 601 (br s 1H NH) 393 (s 3H CH3) 148 (s 9H) 13
C NMR (75
MHz CDCl3) δ 16640 16605 13987 13234 12979 12682 5239 5195 2883
ppm GC-MS (EI 70 eV) mz () = 219 [M+] (20) 186 (22) 148 (100) 130 (30) 76
(20)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
238
53 CONCLUSION
The present study reports an efficient and common protocol for
alkoxycarbonylation phenoxycarbonylation and aminocarbonylation reactions
by using a well-defined heterogeneous ImmPd-IL complex as a versatile
catalyst
The ease of preparation of the complex indefinite shelf life stability towards
air makes it an ideal complex for the above transformations
The reaction system was optimized with respect to various reaction parameters
and applied for carbonylation of a range of aryl iodides with different types of
alcohols phenols and amines furnishing good to excellent yields of the
corresponding products
The present protocol provided high yields of the desired products for all
carbonylation protocols
All the reactions were carried out under milder operating conditions
Catalytic system showed excellent activity and selectivity and effectively
recycled for four consecutive cycles
The leaching of the Pd metal was examined by hot filteration test and ICP-
AES analysis which revels no significant leaching of the palladium occurs
during the reaction
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
239
54 EXPERIMENTAL
541 Materials and Method N-methylimidazole (99+) and 3-trimethoxysilylpropyl
chloride (97+) were purchased from Aldrich PdCl2 was purchased from WAKO
Anhydrous redistilled 1-methylimidazole (99+) was purchased from Aldrich All
the dehydrated solvents were obtained from WAKO Aerosil 300 (300 m2g) was
obtained from Japan Aerosil Co and calcined at 573 K for 15 h in air and 30 min in
vacuum before use as a support The procedures for catalyst preparation were based
previous publication (Sasaki et al 2008) with some modifications Prepared catalyst
was characterized by using IR and elemental analysis and loading of the catalyst was
calculated by XRF measurements (SEA-2010 Seiko Electronic Industrial Co) The
XPS of ImmPd-IL was measured using a PHI5000 Versa Probe with monochromatic
focused (100 times 100 μm) Al Kα X-ray radiation (15 kV 30 mA) and dual beam
neutralization using a combination of argon ion gun and electron irradiation
The products are well-known in the literature and were compared with
authentic samples Progress of the reaction was monitored by gas chromatography
(GC) Gas chromatography analysis was carried out on Perkin-Elmer Clarus 400 GC
equipped flame ionization detector with a capillary column (Elite-1 30 m times 032 mm
times 025 μm) using the external standard method A GCMS-QP 2010 instrument (Rtx-
17 30 m times 25 mm id film thickness 025 μm df) (column flow 2 mL minminus1
80-240
degC at 10 degCmin rise) The 1H NMR spectra were recorded on Varian-300 MHz FT-
NMR spectrometer in CDCl3 using TMS as the internal standard The 13
C NMR
spectra were recorded with a JEOL FT-NMR model-AL300 (75 MHz) spectrometer
in CDCl3 Chemical shifts are reported in parts per million (δ) relative to
tetramethylsilane as the internal standard J (coupling constant) values were reported
in hertz (Hz) Proton splitting patterns are described as s (singlet) d (doublet) t
(triplet) and m (multiplet)
542 Preparation of immobilized palladium metal ion-containing ionic liquid
1-methyl-3-(3-trimethoxysilylpropyl) imidazolium chloride was synthesized by
mixing N-methylimidazole (0690 mol) and 3-trimethoxysilylpropyl chloride (0690
mol) in a dry 300 mL flask under a nitrogen atmosphere and refluxed for 48 h After
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
240
cooling to room temperature the resultant liquid was washed by dehydrated ethyl
acetate five times and dried at room temperature under reduced pressure for 48 h
The obtained compound was stored at 253 K under dry nitrogen Silica (Aerosil 300
surface area 300 m2g calcined at 573 K for 15 h in air) and 1-methyl-3-(3-
trimethoxysilylpropyl) imidazolium chloride (weight ratio 11) was dispersed in
dehydrated toluene and the mixture was refluxed for 48 h under nitrogen
After the reflux toluene was removed by filtration using glass filter and the
excess ionic liquid was removed by washing with dichloromethane several times The
resultant solid is denoted as Imm-IL In the next step Imm-IL was added to an
acetonitrile solution of PdCl2 and refluxed for 24 h Acetonitrile and excess of metal
chloride were removed by washing acetone using glass filter several times The metal
loading of ImmPd-IL was 34 wt as determined by XRF measurements (SEA-2010
Seiko Electronic Industrial Co)
543 General Experimental Procedure for Alkoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
and Et3N (3 mmol) were added The autoclave was closed purged three times with
carbon monoxide pressurized with 73 psi of CO and heated at 80 degC for 3 h After
completion of the reaction the reactor was cooled to room temperature and the
remaining CO gas was carefully vented and the reactor was opened The reactor
vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to remove any traces of
product and catalyst if present The catalyst was filtered and the reaction mixture was
evaporated under vacuum The residue obtained was purified by column
chromatography (silica gel 60-120 mesh petroleum etherethyl acetate 9505) to
afford the desired product
544 General Experimental Procedure for Recycling of ImmPd-IL
After completion of reaction the reaction mixture was cooled to room temperature
and the catalyst was collected by filtration The filtered catalyst was washed with
distilled water (3 times 5 mL) and methanol (3 times 5 mL) to remove all traces of product or
reactant present The filtered catalyst was then dried under reduced pressure The
dried catalyst was then used for the alkoxycarbonylation reaction of iodobenzene with
methanol for the recyclability experiment
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
241
545 XPS spectra of ImmPd-IL catalyst
The XPS spectra of ImmPd-IL shows that two peaks at 337 and 3424 eV for fresh
Imm-Pd are assigned as 3d52 and 3d32 for Pd2+
species respectively (Figure 53)
For the first recycle sample new peaks appear at 3342 and 3392 eV which are
assigned as 3d52 and 3d32 for Pd(0) species respectively indicating that the
reduction of the Pd species takes place during the catalytic reaction From the
spectrum of the fourth recycle sample it is obvious that the component of Pd2+
is
decreasing upon recycles although the component of Pd(0) remains constant
Figure 53 XPS of Pd 3d and Cl 2p for ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
242
546 General Experimental Procedure for Phenoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h After the completion of the reaction the reactor was cooled to room
temperature and the remaining CO gas was carefully vented and the reactor was
opened The reactor vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to
remove any traces of product and catalyst if present The catalyst was filtered and the
reaction mixture was evaporated under vacuum The residue obtained was purified by
column chromatography (silica gel 60-120 mesh petroleum etherethyl acetate
9505) to afford the desired product
547 General Experimental Procedure for Aminocarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol)
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h (the ensuing procedure is the same as that discussed above for the phenoxy
carbonylation reaction)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
243
55 SPECTRAL DATA
Methyl benzoate
GC-MS (EI 70 eV) mz () = 136 [M+] (35) 105 (100) 77 (55) 51 (20)
Ethyl benzoate
GC-MS (EI 70 eV) mz () = 150 [M+] (21) 122 (30) 105 (100) 77 (55)
Benzyl benzoate
1H NMR (300 MHz CDCl3) δ 804-808 (m 2H ArH) 731-752 (m 8H
ArH) 53 (s 2H CH2) 13
C NMR (75 MHz CDCl3) δ 16648 13619 13312
13025 12981 12870 12848 12834 12827 6677
Methyl 4-aminobenzoate
1H NMR (300 MHz CDCl3) δ 783 (d 2H J = 87 Hz ArH) 661 (d 2H J =
87 Hz ArH) 414 (br s 2H NH2) 383 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16724 15107 13151 11927 11368 5155
Methyl 4-hydroxybenzoate
1H NMR (300 MHz CDCl3) δ 794 (d 2H J = 87 Hz ArH) 722 (br s 1H
OH) 690 (d 2H J = 87 Hz ArH) 390 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16778 16055 13203 12201 11539 5223
Methyl 2-naphthoate
1H NMR (300 MHz CDCl3) δ 850 (s 1H ArH) 798-805 (m 2H ArH)
773 (t 2H J = 84 Hz ArH) 754-761 (m 2H ArH) 396 (s 3H OCH3) 13
C NMR
(75 MHz CDCl3) δ 16685 13634 13087 13082 13013 12938 12901 12778
12720 12632 12260 5235
Ethyl 4-acetylbenzoate
1H NMR (300 MHz CDCl3) δ 814-811 (m 2H ArH) 802-799 (m 2H
ArH) 441 (q 2H J = 69Hz CH2CH3) 265 (s 3H COCH3) 142 (t 3H J = 69Hz
CH2CH3) 13
C NMR (75 MHz CDCl3) δ 19766 16576 14012 13424 12977
12817 6147 2689 1427
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
244
Phenyl benzoate
1H NMR (300 MHz CDCl3) δ 825-822 (m 2H ArH) 768-863 (m 1H
ArH) 756-742 (m 4H ArH) 732-723 (m 3H ArH) 13
C NMR (75 MHz CDCl3)
δ 16590 15103 13365 13023 12964 12956 12864 12596 1217 GC-MS (EI
70 eV) mz () = 198 [M+] (9) 105 (100) 77 (40) 51 (9)
phenyl 4-nitrobenzoate
1H NMR (300 MHz CDCl3) δ = 837 (s 4H ArH) 723-748 (m 5H ArH)
13C NMR (75 MHz CDCl3) δ = 16347 15110 15072 13517 13144 12984
12657 12388 12157 GC-MS (EI 70 eV) mz () = 243 [M+] (15) 150 (100) 77
(10)
phenyl 4-methoxybenzoate
1H NMR (300 MHz CDCl3) δ = 814-816 (d 2H J = 87Hz ArH) 720-741
(m 5H ArH) 696-698 (d 2H J = 87 Hz ArH) 386 (s 3H OCH3) GC-MS (EI
70 eV) mz () = 228 [M+] (5) 135 (100) 107 (9) 77 (20)
phenyl-1-naphthoate
1H NMR (300 MHz CDCl3) δ = 904 (d 1H ArH) 845 (d1H ArH) 804
(d 1H ArH) 788 (d 1H ArH) 742-763 (m 5H ArH) 726-728 (m 3H ArH)
13C NMR (70 MHz CDCl3) δ = 16594 15118 13440 13408 13182 13134
12968 12883 12850 12829 12650 12605 12590 12465 12203
N-phenylbenzamide
1H NMR (300 MHz CDCl3) δ 798 (br s 1H NH) 787-883 (m 2H ArH)
763 (d 2H J = 76 Hz ArH) 732-753 (m 5H ArH) 716 (t 1H J = 73 ArH) 13
C
NMR (75 MHz CDCl3) δ 16590 13798 13502 13186 12911 12880 12709
12461 12032 ppm GC-MS mz () = 197 [M+] (42) 105 (100) 77 (54)
4-acetyl-N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 806 (d 2H J = 84Hz ArH) 777 (d 2H J
= 84Hz ArH) 601 (br s 1H NH) 393 (s 3H CH3) 148 (s 9H) 13
C NMR (75
MHz CDCl3) δ 16640 16605 13987 13234 12979 12682 5239 5195 2883
ppm GC-MS (EI 70 eV) mz () = 219 [M+] (20) 186 (22) 148 (100) 130 (30) 76
(20)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
239
54 EXPERIMENTAL
541 Materials and Method N-methylimidazole (99+) and 3-trimethoxysilylpropyl
chloride (97+) were purchased from Aldrich PdCl2 was purchased from WAKO
Anhydrous redistilled 1-methylimidazole (99+) was purchased from Aldrich All
the dehydrated solvents were obtained from WAKO Aerosil 300 (300 m2g) was
obtained from Japan Aerosil Co and calcined at 573 K for 15 h in air and 30 min in
vacuum before use as a support The procedures for catalyst preparation were based
previous publication (Sasaki et al 2008) with some modifications Prepared catalyst
was characterized by using IR and elemental analysis and loading of the catalyst was
calculated by XRF measurements (SEA-2010 Seiko Electronic Industrial Co) The
XPS of ImmPd-IL was measured using a PHI5000 Versa Probe with monochromatic
focused (100 times 100 μm) Al Kα X-ray radiation (15 kV 30 mA) and dual beam
neutralization using a combination of argon ion gun and electron irradiation
The products are well-known in the literature and were compared with
authentic samples Progress of the reaction was monitored by gas chromatography
(GC) Gas chromatography analysis was carried out on Perkin-Elmer Clarus 400 GC
equipped flame ionization detector with a capillary column (Elite-1 30 m times 032 mm
times 025 μm) using the external standard method A GCMS-QP 2010 instrument (Rtx-
17 30 m times 25 mm id film thickness 025 μm df) (column flow 2 mL minminus1
80-240
degC at 10 degCmin rise) The 1H NMR spectra were recorded on Varian-300 MHz FT-
NMR spectrometer in CDCl3 using TMS as the internal standard The 13
C NMR
spectra were recorded with a JEOL FT-NMR model-AL300 (75 MHz) spectrometer
in CDCl3 Chemical shifts are reported in parts per million (δ) relative to
tetramethylsilane as the internal standard J (coupling constant) values were reported
in hertz (Hz) Proton splitting patterns are described as s (singlet) d (doublet) t
(triplet) and m (multiplet)
542 Preparation of immobilized palladium metal ion-containing ionic liquid
1-methyl-3-(3-trimethoxysilylpropyl) imidazolium chloride was synthesized by
mixing N-methylimidazole (0690 mol) and 3-trimethoxysilylpropyl chloride (0690
mol) in a dry 300 mL flask under a nitrogen atmosphere and refluxed for 48 h After
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
240
cooling to room temperature the resultant liquid was washed by dehydrated ethyl
acetate five times and dried at room temperature under reduced pressure for 48 h
The obtained compound was stored at 253 K under dry nitrogen Silica (Aerosil 300
surface area 300 m2g calcined at 573 K for 15 h in air) and 1-methyl-3-(3-
trimethoxysilylpropyl) imidazolium chloride (weight ratio 11) was dispersed in
dehydrated toluene and the mixture was refluxed for 48 h under nitrogen
After the reflux toluene was removed by filtration using glass filter and the
excess ionic liquid was removed by washing with dichloromethane several times The
resultant solid is denoted as Imm-IL In the next step Imm-IL was added to an
acetonitrile solution of PdCl2 and refluxed for 24 h Acetonitrile and excess of metal
chloride were removed by washing acetone using glass filter several times The metal
loading of ImmPd-IL was 34 wt as determined by XRF measurements (SEA-2010
Seiko Electronic Industrial Co)
543 General Experimental Procedure for Alkoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
and Et3N (3 mmol) were added The autoclave was closed purged three times with
carbon monoxide pressurized with 73 psi of CO and heated at 80 degC for 3 h After
completion of the reaction the reactor was cooled to room temperature and the
remaining CO gas was carefully vented and the reactor was opened The reactor
vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to remove any traces of
product and catalyst if present The catalyst was filtered and the reaction mixture was
evaporated under vacuum The residue obtained was purified by column
chromatography (silica gel 60-120 mesh petroleum etherethyl acetate 9505) to
afford the desired product
544 General Experimental Procedure for Recycling of ImmPd-IL
After completion of reaction the reaction mixture was cooled to room temperature
and the catalyst was collected by filtration The filtered catalyst was washed with
distilled water (3 times 5 mL) and methanol (3 times 5 mL) to remove all traces of product or
reactant present The filtered catalyst was then dried under reduced pressure The
dried catalyst was then used for the alkoxycarbonylation reaction of iodobenzene with
methanol for the recyclability experiment
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
241
545 XPS spectra of ImmPd-IL catalyst
The XPS spectra of ImmPd-IL shows that two peaks at 337 and 3424 eV for fresh
Imm-Pd are assigned as 3d52 and 3d32 for Pd2+
species respectively (Figure 53)
For the first recycle sample new peaks appear at 3342 and 3392 eV which are
assigned as 3d52 and 3d32 for Pd(0) species respectively indicating that the
reduction of the Pd species takes place during the catalytic reaction From the
spectrum of the fourth recycle sample it is obvious that the component of Pd2+
is
decreasing upon recycles although the component of Pd(0) remains constant
Figure 53 XPS of Pd 3d and Cl 2p for ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
242
546 General Experimental Procedure for Phenoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h After the completion of the reaction the reactor was cooled to room
temperature and the remaining CO gas was carefully vented and the reactor was
opened The reactor vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to
remove any traces of product and catalyst if present The catalyst was filtered and the
reaction mixture was evaporated under vacuum The residue obtained was purified by
column chromatography (silica gel 60-120 mesh petroleum etherethyl acetate
9505) to afford the desired product
547 General Experimental Procedure for Aminocarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol)
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h (the ensuing procedure is the same as that discussed above for the phenoxy
carbonylation reaction)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
243
55 SPECTRAL DATA
Methyl benzoate
GC-MS (EI 70 eV) mz () = 136 [M+] (35) 105 (100) 77 (55) 51 (20)
Ethyl benzoate
GC-MS (EI 70 eV) mz () = 150 [M+] (21) 122 (30) 105 (100) 77 (55)
Benzyl benzoate
1H NMR (300 MHz CDCl3) δ 804-808 (m 2H ArH) 731-752 (m 8H
ArH) 53 (s 2H CH2) 13
C NMR (75 MHz CDCl3) δ 16648 13619 13312
13025 12981 12870 12848 12834 12827 6677
Methyl 4-aminobenzoate
1H NMR (300 MHz CDCl3) δ 783 (d 2H J = 87 Hz ArH) 661 (d 2H J =
87 Hz ArH) 414 (br s 2H NH2) 383 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16724 15107 13151 11927 11368 5155
Methyl 4-hydroxybenzoate
1H NMR (300 MHz CDCl3) δ 794 (d 2H J = 87 Hz ArH) 722 (br s 1H
OH) 690 (d 2H J = 87 Hz ArH) 390 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16778 16055 13203 12201 11539 5223
Methyl 2-naphthoate
1H NMR (300 MHz CDCl3) δ 850 (s 1H ArH) 798-805 (m 2H ArH)
773 (t 2H J = 84 Hz ArH) 754-761 (m 2H ArH) 396 (s 3H OCH3) 13
C NMR
(75 MHz CDCl3) δ 16685 13634 13087 13082 13013 12938 12901 12778
12720 12632 12260 5235
Ethyl 4-acetylbenzoate
1H NMR (300 MHz CDCl3) δ 814-811 (m 2H ArH) 802-799 (m 2H
ArH) 441 (q 2H J = 69Hz CH2CH3) 265 (s 3H COCH3) 142 (t 3H J = 69Hz
CH2CH3) 13
C NMR (75 MHz CDCl3) δ 19766 16576 14012 13424 12977
12817 6147 2689 1427
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
244
Phenyl benzoate
1H NMR (300 MHz CDCl3) δ 825-822 (m 2H ArH) 768-863 (m 1H
ArH) 756-742 (m 4H ArH) 732-723 (m 3H ArH) 13
C NMR (75 MHz CDCl3)
δ 16590 15103 13365 13023 12964 12956 12864 12596 1217 GC-MS (EI
70 eV) mz () = 198 [M+] (9) 105 (100) 77 (40) 51 (9)
phenyl 4-nitrobenzoate
1H NMR (300 MHz CDCl3) δ = 837 (s 4H ArH) 723-748 (m 5H ArH)
13C NMR (75 MHz CDCl3) δ = 16347 15110 15072 13517 13144 12984
12657 12388 12157 GC-MS (EI 70 eV) mz () = 243 [M+] (15) 150 (100) 77
(10)
phenyl 4-methoxybenzoate
1H NMR (300 MHz CDCl3) δ = 814-816 (d 2H J = 87Hz ArH) 720-741
(m 5H ArH) 696-698 (d 2H J = 87 Hz ArH) 386 (s 3H OCH3) GC-MS (EI
70 eV) mz () = 228 [M+] (5) 135 (100) 107 (9) 77 (20)
phenyl-1-naphthoate
1H NMR (300 MHz CDCl3) δ = 904 (d 1H ArH) 845 (d1H ArH) 804
(d 1H ArH) 788 (d 1H ArH) 742-763 (m 5H ArH) 726-728 (m 3H ArH)
13C NMR (70 MHz CDCl3) δ = 16594 15118 13440 13408 13182 13134
12968 12883 12850 12829 12650 12605 12590 12465 12203
N-phenylbenzamide
1H NMR (300 MHz CDCl3) δ 798 (br s 1H NH) 787-883 (m 2H ArH)
763 (d 2H J = 76 Hz ArH) 732-753 (m 5H ArH) 716 (t 1H J = 73 ArH) 13
C
NMR (75 MHz CDCl3) δ 16590 13798 13502 13186 12911 12880 12709
12461 12032 ppm GC-MS mz () = 197 [M+] (42) 105 (100) 77 (54)
4-acetyl-N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 806 (d 2H J = 84Hz ArH) 777 (d 2H J
= 84Hz ArH) 601 (br s 1H NH) 393 (s 3H CH3) 148 (s 9H) 13
C NMR (75
MHz CDCl3) δ 16640 16605 13987 13234 12979 12682 5239 5195 2883
ppm GC-MS (EI 70 eV) mz () = 219 [M+] (20) 186 (22) 148 (100) 130 (30) 76
(20)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
240
cooling to room temperature the resultant liquid was washed by dehydrated ethyl
acetate five times and dried at room temperature under reduced pressure for 48 h
The obtained compound was stored at 253 K under dry nitrogen Silica (Aerosil 300
surface area 300 m2g calcined at 573 K for 15 h in air) and 1-methyl-3-(3-
trimethoxysilylpropyl) imidazolium chloride (weight ratio 11) was dispersed in
dehydrated toluene and the mixture was refluxed for 48 h under nitrogen
After the reflux toluene was removed by filtration using glass filter and the
excess ionic liquid was removed by washing with dichloromethane several times The
resultant solid is denoted as Imm-IL In the next step Imm-IL was added to an
acetonitrile solution of PdCl2 and refluxed for 24 h Acetonitrile and excess of metal
chloride were removed by washing acetone using glass filter several times The metal
loading of ImmPd-IL was 34 wt as determined by XRF measurements (SEA-2010
Seiko Electronic Industrial Co)
543 General Experimental Procedure for Alkoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) alcohol (5 mL) ImmPd-IL (2 mol )
and Et3N (3 mmol) were added The autoclave was closed purged three times with
carbon monoxide pressurized with 73 psi of CO and heated at 80 degC for 3 h After
completion of the reaction the reactor was cooled to room temperature and the
remaining CO gas was carefully vented and the reactor was opened The reactor
vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to remove any traces of
product and catalyst if present The catalyst was filtered and the reaction mixture was
evaporated under vacuum The residue obtained was purified by column
chromatography (silica gel 60-120 mesh petroleum etherethyl acetate 9505) to
afford the desired product
544 General Experimental Procedure for Recycling of ImmPd-IL
After completion of reaction the reaction mixture was cooled to room temperature
and the catalyst was collected by filtration The filtered catalyst was washed with
distilled water (3 times 5 mL) and methanol (3 times 5 mL) to remove all traces of product or
reactant present The filtered catalyst was then dried under reduced pressure The
dried catalyst was then used for the alkoxycarbonylation reaction of iodobenzene with
methanol for the recyclability experiment
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
241
545 XPS spectra of ImmPd-IL catalyst
The XPS spectra of ImmPd-IL shows that two peaks at 337 and 3424 eV for fresh
Imm-Pd are assigned as 3d52 and 3d32 for Pd2+
species respectively (Figure 53)
For the first recycle sample new peaks appear at 3342 and 3392 eV which are
assigned as 3d52 and 3d32 for Pd(0) species respectively indicating that the
reduction of the Pd species takes place during the catalytic reaction From the
spectrum of the fourth recycle sample it is obvious that the component of Pd2+
is
decreasing upon recycles although the component of Pd(0) remains constant
Figure 53 XPS of Pd 3d and Cl 2p for ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
242
546 General Experimental Procedure for Phenoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h After the completion of the reaction the reactor was cooled to room
temperature and the remaining CO gas was carefully vented and the reactor was
opened The reactor vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to
remove any traces of product and catalyst if present The catalyst was filtered and the
reaction mixture was evaporated under vacuum The residue obtained was purified by
column chromatography (silica gel 60-120 mesh petroleum etherethyl acetate
9505) to afford the desired product
547 General Experimental Procedure for Aminocarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol)
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h (the ensuing procedure is the same as that discussed above for the phenoxy
carbonylation reaction)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
243
55 SPECTRAL DATA
Methyl benzoate
GC-MS (EI 70 eV) mz () = 136 [M+] (35) 105 (100) 77 (55) 51 (20)
Ethyl benzoate
GC-MS (EI 70 eV) mz () = 150 [M+] (21) 122 (30) 105 (100) 77 (55)
Benzyl benzoate
1H NMR (300 MHz CDCl3) δ 804-808 (m 2H ArH) 731-752 (m 8H
ArH) 53 (s 2H CH2) 13
C NMR (75 MHz CDCl3) δ 16648 13619 13312
13025 12981 12870 12848 12834 12827 6677
Methyl 4-aminobenzoate
1H NMR (300 MHz CDCl3) δ 783 (d 2H J = 87 Hz ArH) 661 (d 2H J =
87 Hz ArH) 414 (br s 2H NH2) 383 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16724 15107 13151 11927 11368 5155
Methyl 4-hydroxybenzoate
1H NMR (300 MHz CDCl3) δ 794 (d 2H J = 87 Hz ArH) 722 (br s 1H
OH) 690 (d 2H J = 87 Hz ArH) 390 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16778 16055 13203 12201 11539 5223
Methyl 2-naphthoate
1H NMR (300 MHz CDCl3) δ 850 (s 1H ArH) 798-805 (m 2H ArH)
773 (t 2H J = 84 Hz ArH) 754-761 (m 2H ArH) 396 (s 3H OCH3) 13
C NMR
(75 MHz CDCl3) δ 16685 13634 13087 13082 13013 12938 12901 12778
12720 12632 12260 5235
Ethyl 4-acetylbenzoate
1H NMR (300 MHz CDCl3) δ 814-811 (m 2H ArH) 802-799 (m 2H
ArH) 441 (q 2H J = 69Hz CH2CH3) 265 (s 3H COCH3) 142 (t 3H J = 69Hz
CH2CH3) 13
C NMR (75 MHz CDCl3) δ 19766 16576 14012 13424 12977
12817 6147 2689 1427
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
244
Phenyl benzoate
1H NMR (300 MHz CDCl3) δ 825-822 (m 2H ArH) 768-863 (m 1H
ArH) 756-742 (m 4H ArH) 732-723 (m 3H ArH) 13
C NMR (75 MHz CDCl3)
δ 16590 15103 13365 13023 12964 12956 12864 12596 1217 GC-MS (EI
70 eV) mz () = 198 [M+] (9) 105 (100) 77 (40) 51 (9)
phenyl 4-nitrobenzoate
1H NMR (300 MHz CDCl3) δ = 837 (s 4H ArH) 723-748 (m 5H ArH)
13C NMR (75 MHz CDCl3) δ = 16347 15110 15072 13517 13144 12984
12657 12388 12157 GC-MS (EI 70 eV) mz () = 243 [M+] (15) 150 (100) 77
(10)
phenyl 4-methoxybenzoate
1H NMR (300 MHz CDCl3) δ = 814-816 (d 2H J = 87Hz ArH) 720-741
(m 5H ArH) 696-698 (d 2H J = 87 Hz ArH) 386 (s 3H OCH3) GC-MS (EI
70 eV) mz () = 228 [M+] (5) 135 (100) 107 (9) 77 (20)
phenyl-1-naphthoate
1H NMR (300 MHz CDCl3) δ = 904 (d 1H ArH) 845 (d1H ArH) 804
(d 1H ArH) 788 (d 1H ArH) 742-763 (m 5H ArH) 726-728 (m 3H ArH)
13C NMR (70 MHz CDCl3) δ = 16594 15118 13440 13408 13182 13134
12968 12883 12850 12829 12650 12605 12590 12465 12203
N-phenylbenzamide
1H NMR (300 MHz CDCl3) δ 798 (br s 1H NH) 787-883 (m 2H ArH)
763 (d 2H J = 76 Hz ArH) 732-753 (m 5H ArH) 716 (t 1H J = 73 ArH) 13
C
NMR (75 MHz CDCl3) δ 16590 13798 13502 13186 12911 12880 12709
12461 12032 ppm GC-MS mz () = 197 [M+] (42) 105 (100) 77 (54)
4-acetyl-N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 806 (d 2H J = 84Hz ArH) 777 (d 2H J
= 84Hz ArH) 601 (br s 1H NH) 393 (s 3H CH3) 148 (s 9H) 13
C NMR (75
MHz CDCl3) δ 16640 16605 13987 13234 12979 12682 5239 5195 2883
ppm GC-MS (EI 70 eV) mz () = 219 [M+] (20) 186 (22) 148 (100) 130 (30) 76
(20)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
241
545 XPS spectra of ImmPd-IL catalyst
The XPS spectra of ImmPd-IL shows that two peaks at 337 and 3424 eV for fresh
Imm-Pd are assigned as 3d52 and 3d32 for Pd2+
species respectively (Figure 53)
For the first recycle sample new peaks appear at 3342 and 3392 eV which are
assigned as 3d52 and 3d32 for Pd(0) species respectively indicating that the
reduction of the Pd species takes place during the catalytic reaction From the
spectrum of the fourth recycle sample it is obvious that the component of Pd2+
is
decreasing upon recycles although the component of Pd(0) remains constant
Figure 53 XPS of Pd 3d and Cl 2p for ImmPd-IL catalyst
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
242
546 General Experimental Procedure for Phenoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h After the completion of the reaction the reactor was cooled to room
temperature and the remaining CO gas was carefully vented and the reactor was
opened The reactor vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to
remove any traces of product and catalyst if present The catalyst was filtered and the
reaction mixture was evaporated under vacuum The residue obtained was purified by
column chromatography (silica gel 60-120 mesh petroleum etherethyl acetate
9505) to afford the desired product
547 General Experimental Procedure for Aminocarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol)
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h (the ensuing procedure is the same as that discussed above for the phenoxy
carbonylation reaction)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
243
55 SPECTRAL DATA
Methyl benzoate
GC-MS (EI 70 eV) mz () = 136 [M+] (35) 105 (100) 77 (55) 51 (20)
Ethyl benzoate
GC-MS (EI 70 eV) mz () = 150 [M+] (21) 122 (30) 105 (100) 77 (55)
Benzyl benzoate
1H NMR (300 MHz CDCl3) δ 804-808 (m 2H ArH) 731-752 (m 8H
ArH) 53 (s 2H CH2) 13
C NMR (75 MHz CDCl3) δ 16648 13619 13312
13025 12981 12870 12848 12834 12827 6677
Methyl 4-aminobenzoate
1H NMR (300 MHz CDCl3) δ 783 (d 2H J = 87 Hz ArH) 661 (d 2H J =
87 Hz ArH) 414 (br s 2H NH2) 383 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16724 15107 13151 11927 11368 5155
Methyl 4-hydroxybenzoate
1H NMR (300 MHz CDCl3) δ 794 (d 2H J = 87 Hz ArH) 722 (br s 1H
OH) 690 (d 2H J = 87 Hz ArH) 390 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16778 16055 13203 12201 11539 5223
Methyl 2-naphthoate
1H NMR (300 MHz CDCl3) δ 850 (s 1H ArH) 798-805 (m 2H ArH)
773 (t 2H J = 84 Hz ArH) 754-761 (m 2H ArH) 396 (s 3H OCH3) 13
C NMR
(75 MHz CDCl3) δ 16685 13634 13087 13082 13013 12938 12901 12778
12720 12632 12260 5235
Ethyl 4-acetylbenzoate
1H NMR (300 MHz CDCl3) δ 814-811 (m 2H ArH) 802-799 (m 2H
ArH) 441 (q 2H J = 69Hz CH2CH3) 265 (s 3H COCH3) 142 (t 3H J = 69Hz
CH2CH3) 13
C NMR (75 MHz CDCl3) δ 19766 16576 14012 13424 12977
12817 6147 2689 1427
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
244
Phenyl benzoate
1H NMR (300 MHz CDCl3) δ 825-822 (m 2H ArH) 768-863 (m 1H
ArH) 756-742 (m 4H ArH) 732-723 (m 3H ArH) 13
C NMR (75 MHz CDCl3)
δ 16590 15103 13365 13023 12964 12956 12864 12596 1217 GC-MS (EI
70 eV) mz () = 198 [M+] (9) 105 (100) 77 (40) 51 (9)
phenyl 4-nitrobenzoate
1H NMR (300 MHz CDCl3) δ = 837 (s 4H ArH) 723-748 (m 5H ArH)
13C NMR (75 MHz CDCl3) δ = 16347 15110 15072 13517 13144 12984
12657 12388 12157 GC-MS (EI 70 eV) mz () = 243 [M+] (15) 150 (100) 77
(10)
phenyl 4-methoxybenzoate
1H NMR (300 MHz CDCl3) δ = 814-816 (d 2H J = 87Hz ArH) 720-741
(m 5H ArH) 696-698 (d 2H J = 87 Hz ArH) 386 (s 3H OCH3) GC-MS (EI
70 eV) mz () = 228 [M+] (5) 135 (100) 107 (9) 77 (20)
phenyl-1-naphthoate
1H NMR (300 MHz CDCl3) δ = 904 (d 1H ArH) 845 (d1H ArH) 804
(d 1H ArH) 788 (d 1H ArH) 742-763 (m 5H ArH) 726-728 (m 3H ArH)
13C NMR (70 MHz CDCl3) δ = 16594 15118 13440 13408 13182 13134
12968 12883 12850 12829 12650 12605 12590 12465 12203
N-phenylbenzamide
1H NMR (300 MHz CDCl3) δ 798 (br s 1H NH) 787-883 (m 2H ArH)
763 (d 2H J = 76 Hz ArH) 732-753 (m 5H ArH) 716 (t 1H J = 73 ArH) 13
C
NMR (75 MHz CDCl3) δ 16590 13798 13502 13186 12911 12880 12709
12461 12032 ppm GC-MS mz () = 197 [M+] (42) 105 (100) 77 (54)
4-acetyl-N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 806 (d 2H J = 84Hz ArH) 777 (d 2H J
= 84Hz ArH) 601 (br s 1H NH) 393 (s 3H CH3) 148 (s 9H) 13
C NMR (75
MHz CDCl3) δ 16640 16605 13987 13234 12979 12682 5239 5195 2883
ppm GC-MS (EI 70 eV) mz () = 219 [M+] (20) 186 (22) 148 (100) 130 (30) 76
(20)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
242
546 General Experimental Procedure for Phenoxycarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) phenol (2 mmol) ImmPd-IL (2 mol )
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h After the completion of the reaction the reactor was cooled to room
temperature and the remaining CO gas was carefully vented and the reactor was
opened The reactor vessel was thoroughly washed with ethyl acetate (2 times 10 mL) to
remove any traces of product and catalyst if present The catalyst was filtered and the
reaction mixture was evaporated under vacuum The residue obtained was purified by
column chromatography (silica gel 60-120 mesh petroleum etherethyl acetate
9505) to afford the desired product
547 General Experimental Procedure for Aminocarbonylation Reaction
To a 100 mL autoclave aryl iodide (1 mmol) amine (2 mmol) ImmPd-IL (2 mol)
toluene (10 mL) and Et3N (3 mmol) were added The autoclave was closed purged
three times with carbon monoxide pressurized with 145 psi of CO and heated at 100
degC for 8 h (the ensuing procedure is the same as that discussed above for the phenoxy
carbonylation reaction)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
243
55 SPECTRAL DATA
Methyl benzoate
GC-MS (EI 70 eV) mz () = 136 [M+] (35) 105 (100) 77 (55) 51 (20)
Ethyl benzoate
GC-MS (EI 70 eV) mz () = 150 [M+] (21) 122 (30) 105 (100) 77 (55)
Benzyl benzoate
1H NMR (300 MHz CDCl3) δ 804-808 (m 2H ArH) 731-752 (m 8H
ArH) 53 (s 2H CH2) 13
C NMR (75 MHz CDCl3) δ 16648 13619 13312
13025 12981 12870 12848 12834 12827 6677
Methyl 4-aminobenzoate
1H NMR (300 MHz CDCl3) δ 783 (d 2H J = 87 Hz ArH) 661 (d 2H J =
87 Hz ArH) 414 (br s 2H NH2) 383 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16724 15107 13151 11927 11368 5155
Methyl 4-hydroxybenzoate
1H NMR (300 MHz CDCl3) δ 794 (d 2H J = 87 Hz ArH) 722 (br s 1H
OH) 690 (d 2H J = 87 Hz ArH) 390 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16778 16055 13203 12201 11539 5223
Methyl 2-naphthoate
1H NMR (300 MHz CDCl3) δ 850 (s 1H ArH) 798-805 (m 2H ArH)
773 (t 2H J = 84 Hz ArH) 754-761 (m 2H ArH) 396 (s 3H OCH3) 13
C NMR
(75 MHz CDCl3) δ 16685 13634 13087 13082 13013 12938 12901 12778
12720 12632 12260 5235
Ethyl 4-acetylbenzoate
1H NMR (300 MHz CDCl3) δ 814-811 (m 2H ArH) 802-799 (m 2H
ArH) 441 (q 2H J = 69Hz CH2CH3) 265 (s 3H COCH3) 142 (t 3H J = 69Hz
CH2CH3) 13
C NMR (75 MHz CDCl3) δ 19766 16576 14012 13424 12977
12817 6147 2689 1427
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
244
Phenyl benzoate
1H NMR (300 MHz CDCl3) δ 825-822 (m 2H ArH) 768-863 (m 1H
ArH) 756-742 (m 4H ArH) 732-723 (m 3H ArH) 13
C NMR (75 MHz CDCl3)
δ 16590 15103 13365 13023 12964 12956 12864 12596 1217 GC-MS (EI
70 eV) mz () = 198 [M+] (9) 105 (100) 77 (40) 51 (9)
phenyl 4-nitrobenzoate
1H NMR (300 MHz CDCl3) δ = 837 (s 4H ArH) 723-748 (m 5H ArH)
13C NMR (75 MHz CDCl3) δ = 16347 15110 15072 13517 13144 12984
12657 12388 12157 GC-MS (EI 70 eV) mz () = 243 [M+] (15) 150 (100) 77
(10)
phenyl 4-methoxybenzoate
1H NMR (300 MHz CDCl3) δ = 814-816 (d 2H J = 87Hz ArH) 720-741
(m 5H ArH) 696-698 (d 2H J = 87 Hz ArH) 386 (s 3H OCH3) GC-MS (EI
70 eV) mz () = 228 [M+] (5) 135 (100) 107 (9) 77 (20)
phenyl-1-naphthoate
1H NMR (300 MHz CDCl3) δ = 904 (d 1H ArH) 845 (d1H ArH) 804
(d 1H ArH) 788 (d 1H ArH) 742-763 (m 5H ArH) 726-728 (m 3H ArH)
13C NMR (70 MHz CDCl3) δ = 16594 15118 13440 13408 13182 13134
12968 12883 12850 12829 12650 12605 12590 12465 12203
N-phenylbenzamide
1H NMR (300 MHz CDCl3) δ 798 (br s 1H NH) 787-883 (m 2H ArH)
763 (d 2H J = 76 Hz ArH) 732-753 (m 5H ArH) 716 (t 1H J = 73 ArH) 13
C
NMR (75 MHz CDCl3) δ 16590 13798 13502 13186 12911 12880 12709
12461 12032 ppm GC-MS mz () = 197 [M+] (42) 105 (100) 77 (54)
4-acetyl-N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 806 (d 2H J = 84Hz ArH) 777 (d 2H J
= 84Hz ArH) 601 (br s 1H NH) 393 (s 3H CH3) 148 (s 9H) 13
C NMR (75
MHz CDCl3) δ 16640 16605 13987 13234 12979 12682 5239 5195 2883
ppm GC-MS (EI 70 eV) mz () = 219 [M+] (20) 186 (22) 148 (100) 130 (30) 76
(20)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
243
55 SPECTRAL DATA
Methyl benzoate
GC-MS (EI 70 eV) mz () = 136 [M+] (35) 105 (100) 77 (55) 51 (20)
Ethyl benzoate
GC-MS (EI 70 eV) mz () = 150 [M+] (21) 122 (30) 105 (100) 77 (55)
Benzyl benzoate
1H NMR (300 MHz CDCl3) δ 804-808 (m 2H ArH) 731-752 (m 8H
ArH) 53 (s 2H CH2) 13
C NMR (75 MHz CDCl3) δ 16648 13619 13312
13025 12981 12870 12848 12834 12827 6677
Methyl 4-aminobenzoate
1H NMR (300 MHz CDCl3) δ 783 (d 2H J = 87 Hz ArH) 661 (d 2H J =
87 Hz ArH) 414 (br s 2H NH2) 383 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16724 15107 13151 11927 11368 5155
Methyl 4-hydroxybenzoate
1H NMR (300 MHz CDCl3) δ 794 (d 2H J = 87 Hz ArH) 722 (br s 1H
OH) 690 (d 2H J = 87 Hz ArH) 390 (s 3H OCH3) 13
C NMR (75 MHz CDCl3)
δ 16778 16055 13203 12201 11539 5223
Methyl 2-naphthoate
1H NMR (300 MHz CDCl3) δ 850 (s 1H ArH) 798-805 (m 2H ArH)
773 (t 2H J = 84 Hz ArH) 754-761 (m 2H ArH) 396 (s 3H OCH3) 13
C NMR
(75 MHz CDCl3) δ 16685 13634 13087 13082 13013 12938 12901 12778
12720 12632 12260 5235
Ethyl 4-acetylbenzoate
1H NMR (300 MHz CDCl3) δ 814-811 (m 2H ArH) 802-799 (m 2H
ArH) 441 (q 2H J = 69Hz CH2CH3) 265 (s 3H COCH3) 142 (t 3H J = 69Hz
CH2CH3) 13
C NMR (75 MHz CDCl3) δ 19766 16576 14012 13424 12977
12817 6147 2689 1427
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
244
Phenyl benzoate
1H NMR (300 MHz CDCl3) δ 825-822 (m 2H ArH) 768-863 (m 1H
ArH) 756-742 (m 4H ArH) 732-723 (m 3H ArH) 13
C NMR (75 MHz CDCl3)
δ 16590 15103 13365 13023 12964 12956 12864 12596 1217 GC-MS (EI
70 eV) mz () = 198 [M+] (9) 105 (100) 77 (40) 51 (9)
phenyl 4-nitrobenzoate
1H NMR (300 MHz CDCl3) δ = 837 (s 4H ArH) 723-748 (m 5H ArH)
13C NMR (75 MHz CDCl3) δ = 16347 15110 15072 13517 13144 12984
12657 12388 12157 GC-MS (EI 70 eV) mz () = 243 [M+] (15) 150 (100) 77
(10)
phenyl 4-methoxybenzoate
1H NMR (300 MHz CDCl3) δ = 814-816 (d 2H J = 87Hz ArH) 720-741
(m 5H ArH) 696-698 (d 2H J = 87 Hz ArH) 386 (s 3H OCH3) GC-MS (EI
70 eV) mz () = 228 [M+] (5) 135 (100) 107 (9) 77 (20)
phenyl-1-naphthoate
1H NMR (300 MHz CDCl3) δ = 904 (d 1H ArH) 845 (d1H ArH) 804
(d 1H ArH) 788 (d 1H ArH) 742-763 (m 5H ArH) 726-728 (m 3H ArH)
13C NMR (70 MHz CDCl3) δ = 16594 15118 13440 13408 13182 13134
12968 12883 12850 12829 12650 12605 12590 12465 12203
N-phenylbenzamide
1H NMR (300 MHz CDCl3) δ 798 (br s 1H NH) 787-883 (m 2H ArH)
763 (d 2H J = 76 Hz ArH) 732-753 (m 5H ArH) 716 (t 1H J = 73 ArH) 13
C
NMR (75 MHz CDCl3) δ 16590 13798 13502 13186 12911 12880 12709
12461 12032 ppm GC-MS mz () = 197 [M+] (42) 105 (100) 77 (54)
4-acetyl-N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 806 (d 2H J = 84Hz ArH) 777 (d 2H J
= 84Hz ArH) 601 (br s 1H NH) 393 (s 3H CH3) 148 (s 9H) 13
C NMR (75
MHz CDCl3) δ 16640 16605 13987 13234 12979 12682 5239 5195 2883
ppm GC-MS (EI 70 eV) mz () = 219 [M+] (20) 186 (22) 148 (100) 130 (30) 76
(20)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
244
Phenyl benzoate
1H NMR (300 MHz CDCl3) δ 825-822 (m 2H ArH) 768-863 (m 1H
ArH) 756-742 (m 4H ArH) 732-723 (m 3H ArH) 13
C NMR (75 MHz CDCl3)
δ 16590 15103 13365 13023 12964 12956 12864 12596 1217 GC-MS (EI
70 eV) mz () = 198 [M+] (9) 105 (100) 77 (40) 51 (9)
phenyl 4-nitrobenzoate
1H NMR (300 MHz CDCl3) δ = 837 (s 4H ArH) 723-748 (m 5H ArH)
13C NMR (75 MHz CDCl3) δ = 16347 15110 15072 13517 13144 12984
12657 12388 12157 GC-MS (EI 70 eV) mz () = 243 [M+] (15) 150 (100) 77
(10)
phenyl 4-methoxybenzoate
1H NMR (300 MHz CDCl3) δ = 814-816 (d 2H J = 87Hz ArH) 720-741
(m 5H ArH) 696-698 (d 2H J = 87 Hz ArH) 386 (s 3H OCH3) GC-MS (EI
70 eV) mz () = 228 [M+] (5) 135 (100) 107 (9) 77 (20)
phenyl-1-naphthoate
1H NMR (300 MHz CDCl3) δ = 904 (d 1H ArH) 845 (d1H ArH) 804
(d 1H ArH) 788 (d 1H ArH) 742-763 (m 5H ArH) 726-728 (m 3H ArH)
13C NMR (70 MHz CDCl3) δ = 16594 15118 13440 13408 13182 13134
12968 12883 12850 12829 12650 12605 12590 12465 12203
N-phenylbenzamide
1H NMR (300 MHz CDCl3) δ 798 (br s 1H NH) 787-883 (m 2H ArH)
763 (d 2H J = 76 Hz ArH) 732-753 (m 5H ArH) 716 (t 1H J = 73 ArH) 13
C
NMR (75 MHz CDCl3) δ 16590 13798 13502 13186 12911 12880 12709
12461 12032 ppm GC-MS mz () = 197 [M+] (42) 105 (100) 77 (54)
4-acetyl-N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 806 (d 2H J = 84Hz ArH) 777 (d 2H J
= 84Hz ArH) 601 (br s 1H NH) 393 (s 3H CH3) 148 (s 9H) 13
C NMR (75
MHz CDCl3) δ 16640 16605 13987 13234 12979 12682 5239 5195 2883
ppm GC-MS (EI 70 eV) mz () = 219 [M+] (20) 186 (22) 148 (100) 130 (30) 76
(20)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
245
N-benzylbenzamide
1H NMR (300 MHz CDCl3) δ 799-776 (d 2H J = 73 Hz ArH) 740-729
(m 8H ArH) 670 (br s 1H NH) 459 (d 2H J = 57 Hz CH2) 13
C NMR (75
MHz CDCl3) δ 16748 13830 13441 13157 12879 12860 12791 12759
12706 4411 GC-MS (EI 70 eV) mz () = 211 [M+] (11) 210 (68) 209 (30) 105
(100) 91 (11) 77 (69) 51 (12)
N-cyclohexylbenzamide
1H NMR (300 MHz CDCl3) δ 777-774 (m 2H ArH) 736-746 (m 3H
ArH) 618 (br s 1H NH) 397-394 (m 1H CH) 203-198 (m 2H CH2) 177-161
(m 3H CH2) 143-115 (m 5H CH2) 13
C NMR (75 MHz CDCl3) δ 16669 13511
13122 12849 12691 4873 3321 2558 2498 GC-MS (EI 70 eV) mz () =
203 [M+] (29) 122 (75) 105 (100) 79 (15) 77 (52)
N-(tert-butyl)benzamide
1H NMR (300 MHz CDCl3) δ = 768-771(m 3H ArH) 735-744 (m 3H
ArH) 595 (br s 1H NH) 145 (s 9H CH3) 13
C NMR (75 MHz CDCl3) δ 16694
13595 13109 12849 12672 5162 2890 ppm GC-MS (EI 70 eV) mz () =
1779 [M+] (20) 162 (22) 122 (18) 105 (100) 76 (20)
N-methyl-N-phenylbenzamide
GC-MS (EI 70 eV) mz () = 211 [M+] (25) 118 (9) 105 (100) 77 (60) 51
(15)
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
246
551 SPECTRAS
Figure 54 GC-MS spectrum of Methyl benzoate
Figure 55 GC-MS spectrum of Ethyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
247
Figure 56 1H NMR (300 MHz) spectrum of Benzyl benzoate
Figure 57 13
C NMR (75 MHz) spectrum of Benzyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
248
Figure 58 1H NMR (300 MHz) spectrum of Methyl 4-aminobenzoate
Figure 59 13
C NMR (75 MHz) spectrum of Methyl 4-aminobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
249
Figure 510 1H NMR (300 MHz) spectrum of Methyl 4-hydroxybenzoate
Figure 511 13
C NMR (75 MHz) spectrum of Methyl 4-hydroxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
250
Figure 512 1H NMR (300 MHz) spectrum of Methyl 2-naphthoate
Figure 513 13
C NMR (75 MHz) spectrum of Methyl 2-naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
251
Figure 514 1H NMR (300 MHz) spectrum of Ethyl 4-acetylbenzoate
Figure 515 13
C NMR (75 MHz) spectrum of Ethyl 4-acetylbenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
252
Figure 516 1H NMR (300 MHz) spectrum of Phenyl benzoate
Figure 517 13
C NMR (75 MHz) spectrum of Phenyl benzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
253
Figure 518 GC-MS spectrum of Phenyl benzoate
Figure 519 1H NMR (300 MHz) spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
254
Figure 520 13
C NMR (75 MHz) spectrum of Phenyl 4-nitrobenzoate
Figure 521 GC-MS spectrum of Phenyl 4-nitrobenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
255
Figure 522 1H NMR (300 MHz) spectrum of Phenyl 4-methoxybenzoate
Figure 523 GC-MS of Phenyl 4-methoxybenzoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
256
Figure 524 1H NMR (300 MHz) spectrum of Phenyl 1-Naphthoate
Figure 525 13
C NMR (75 MHz) spectrum of Phenyl 1-Naphthoate
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
257
Figure 526 1H NMR (300 MHz) spectrum of N-phenylbenzamide
Figure 527 13
C NMR (75 MHz) spectrum of N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
258
Figure 528 GC-MS spectrum of N-phenylbenzamide
Figure 529 1H NMR (300 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
259
Figure 530 13
C NMR (75 MHz) spectrum of 4-acetyl-N-(tert-butyl)benzamide
Figure 531 GC-MS spectrum of 4-acetyl-N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
260
Figure 532 1H NMR (300 MHz) spectrum of N-benzylbenzamide
Figure 533 13
C NMR (75 MHz) spectrum of N-benzylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
261
Figure 534 GC-MS spectrum of N-benzylbenzamide
Figure 535 1H NMR (300 MHz) spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
262
Figure 536 13
C NMR (75 MHz) spectrum of N-cyclohexylbenzamide
Figure 537 GC-MS spectrum of N-cyclohexylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
263
Figure 538 1H NMR (300 MHz) spectrum of N-(tert-butyl)benzamide
Figure 539 13
C NMR (75 MHz) spectrum of N-(tert-butyl)benzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide
Chapter 5
copy Mayur Vinodrao Khedkar Institute of Chemical Technology (ICT) Mumbai India
264
Figure 540 GC-MS spectrum of N-(tert-butyl)benzamide
Figure 541 GC-MS spectrum of N-methyl-N-phenylbenzamide