511 Seal & Enhance - ONBOCES...Light Cleaning For light cleaning use Mira Clean #1as directed....

PP RR OO DD UU CC TT II NN SS TT RR UU CC TT II OO NN SS

www.miraclesealants.com511 Seal & EnhanceImpregnating Color Enhancer

11_2

004

Ready to Use “One Step” VOC Compliant Solvent BaseImpregnator/Color Enhancer for All Honed, Textured and PolishedSurfaces Including:■ Granite ■ Marble ■ Natural Stone■ Slate ■ Limestone ■ Ceramic Tile■ Quarry Tile ■ Grout ■ Concrete/Masonry

Special Features■ Superior Stain Protection ■ Superior Color Enhancement■ Oil Resistant ■ Water Resistant■ One Product, One Step ■ VOC Compliant■ Durable (3 – 5 Years) ■ Easy to Use■ Interior & Exterior Applications ■ Non Yellowing■ Grout Release ■ Grout Sealer

Product DescriptionKEEP OUT OF REACH OF CHILDREN. 511 Seal & Enhance is a unique, VOCcompliant, solvent-base formula that provides superior stain protection andsuperior color enhancement in one easy to use product. 511 Seal &Enhance will enhance the color and rejuvenate the appearance of tumbled,honed, acid-washed, sandblasted, flamed, textured, even polished stoneand tile surfaces. 511 Seal & Enhance can also be used on new installationsas a grout release before the grouting process.

Sample TestingDue to the differences of each surface, several inconspicuous test patchesshould be completed with each product to assure maximum performance.Users must determine the suitability of the product for their intended use.

NEW INSTALL ATIONS

Follow the recommended installation methods and procedures of theMarble Institute of America, Building Stone Institute and the Tile Council ofAmerica. Allow new setting materials and grout to cure per manufacturersinstructions prior to sealing.

Sealing as a Grout ReleaseTo insure the best possible installation, 511 Seal & Enhance should beapplied as a grout release before the grouting process. 511 Seal & Enhancewill resist dye absorption, facilitate grout residue removal (up to 45%faster), and offer superior stain resistance during and after the constructionprocess.

Directions1. Protect neighboring and adjacent surfaces including baseboards, wood,

carpet, metal and landscaping.

2. Sweep or vacuum all dust, dirt and surface debris.

3. Insure the surface is clean, dry and free from containments.

4. Liberally apply an even application of 511 Seal & Enhance using aMiracle Sealants’ Hand/Stand Applicator or clean white towel. Be careful not to allow sealants into open un-grouted joints.

5. Allow 511 Seal & Enhance to penetrate the surface for 3 - 5 minutesbefore removing all excess sealer/enhancer before it dries on the surface with a clean towel.

6. A 2nd application is necessary and should be applied after the first hasdried at least 1 hour.

7. Any excess product that has dried on the surface creating aresidue/film, may be removed by reactivating the residue with 511 Seal& Enhance and immediately buffing dry.

8. Proceed with the grouting process per the manufacturer’s instructions.

9. Clean all excess grout completely from the surface with a clean spongeand water. Take the time at this stage of the installation to carefullyclean and detail.

10. Allow grout joints to dry per manufacturers specification.

11. If grout clean up is not performed effectively, additional cleaning maybe necessary.

Grout SealingOnce the grout has cured per the manufacturers recommendations, proceed with the sealing of the grout.

Directions1. Insure that the surface is clean, dry and free from containments.

2. Liberally apply an even application of 511 Seal & Enhance using aMiracle Sealants’ Hand/Stand Applicator, clean white towel or a thinpaintbrush directly to untreated grout joints.

3. Allow 511 Seal & Enhance to penetrate the surface for 3 - 5 minutesbefore removing all excess sealer/enhancer with a clean towel.

12. A 2nd application is necessary and should be applied after the first hasdried at least 1 hour.

13. Any excess product that has dried on the surface creating aresidue/film, may be removed by reactivating the residue with 511 Seal & Enhance and immediately buffing dry.

Finished area should be allowed to cure for 12 - 24 hours before putting intoservice. For optimum results keep area dry and free from stains for 72hours after application.

E XI STING INSTALL ATIONS

Surface must be dry and free of contaminants including previously appliedsealers, coatings, waxes, dirt, lime & hard water deposits, efflorescence,rust and other heavy dirt and grime.

Floor Finish RemovalTo remove existing floor finish and/or waxes use Mira Strip for solvent basefinish and H2O Strip for water base finish as directed.

Heavy Duty CleaningTo remove lime, hard water deposits, efflorescence rust and other heavydirt and grime use GCFR (Grout, Concrete Film Remover) “Stronger” or Pre-Cast Concrete Cleaner “Mild-Strong” as directed. These acid cleanerscan affect the surface finish of acid sensitive stone and tile. For acid sensitive stone or tile use Liquid Poultice as directed.

Light CleaningFor light cleaning use Mira Clean #1 as directed.

Sealing (Surface & Grout)Follow the application instructions previously mentioned, except now sealgrout joints at the same time as the rest of the stone or tile surface. Whentreating the surface and grout at the same time make sure to saturate thegrout with 511 Seal & Enhance. Do not allow 511 Seal & Enhance to puddleon the surface.

CoverageCoverage will vary depending on density, porosity, texture, surface absorp-tion, weather, time solution is left on the surface and application methods.Used as directed, 511 Seal & Enhance will cover approximately 250 - 2,000square feet per gallon (25 - 200 square meters per 3.785 liters).

PP RR OO DD UU CC TT II NN SS TT RR UU CC TT II OO NN SS

www.miraclesealants.com511 Seal & EnhanceImpregnating Color Enhancer

11_2

004

RE SEALING

Resealing will vary depending on porosity, density, hardness, foot traffic andthe elements (indoor or outdoor) the area is exposed to. As a general rule,medium to dense surfaces exposed to heavy foot traffic can be resealedevery 1 - 3 years. Very hard surfaces exposed to heavy foot traffic can beresealed every 3 - 5 years. It is important to remember that any additionalor future applications of 511 Sealants will require approximately half theamount of sealant as originally used.

Mold, Mildew and Bacteria SanitationFor best results in killing mold, mildew, bacteria and other microorganisms,use Miracle Disinfectant or Miracle Wipes as directed.

StorageStore 511 Seal & Enhance in the original container, properly sealed to avoidcontamination and evaporation. When store in the upright position at 77° F(40° C), 511 Seal & Enhance will have a shelf life of 12 months. Do not allowto freeze.

Technical SupportFor additional technical support, contact Miracle Sealants Company @ 1-800-350-1901 or 626-443-6433 ext. 3013. Monday – Friday from 6:30 am – 5:00 pm PT.

Office HoursMonday – Friday from 8:30 am – 5:00 pm PT.1-626-443-6433 • 1-800-350-1901 Fax: 1-626-443-1435

Websitewww.miraclesealants.com

Product DamageIf product is damaged during transportation contact Info Trac @ 1-800-535-5053

Additional ProductsMiracle Sealants Company offers a complete line of water & stain repellents, sealers, cleaners, polishing compounds, diamond abrasives,machinery and accessories for the tile, stone, concrete, metal, fabric andcarpet professional or do-it-yourself specialist.

WarrantyInstructions are a condensed guide and should not be considered complete. In the event of failure, the only obligation of Miracle SealantsCompany shall be to replace such products proven defective. Before using,user shall determine the suitability of the product for their intended use.User assumes all risks and liability whatsoever in connection therein.Neither seller nor manufacturer shall be liable for any injury or inability touse this product.

Caution511 Seal & Enhance contains combustible petroleum distillates. All solventsmust be considered toxic and must be used in a well-ventilated area. Goodventilation means that fresh air is flowing in such a way as to feel a slightbreeze. Open windows and use fans to circulate air. Continue to ventilateuntil vapors are eliminated. Exposure to high vapor concentration must beavoided. Inhaling the vapors can be harmful. Keep away from heat andopen flames. Avoid prolonged contact with skin. Gloves should be worn atall times. Keep small children and pets out of the area until product or sur-face has thoroughly dried. Refer to the MSDS for additional information.

MM AA TT EE RR II AA LL SS AA FF EE TT YY DD AA TT AA SS HH EE EE TT

511 Seal & EnhanceImpregnating Color Enhancer

10_2

004

Osha's Hazard Communication Standard US Dept. of LaborIdentity No: Name: 511 Seal & EnhanceSection 1Manufacturers Name: Miracle Sealants CompanyAddress: 12318 Lower Azusa RoadEmergency Phone: 800-350-1901City: ArcadiaState: CAPhone: 626-443-6433Date Prepared: October 26, 2004Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS# OSHA PEL ACGIH TWASolvent Naptha (Petroleum) 64742-88-7 500 ppm 100 ppmMedium AliphaticSection 3 - Physical /Chemical CharacteristicsBoiling Point: Appx. N200° C Specific gravity (H20=1) -1.25Vapor pressure: Not Determined Melting point: Not DeterminedVapor density(air=1) : Heavier than air Evaporation rate(Butyl) : ó1Solubility in water: NoneAppearance and odor: Clear, Colorless to amber Liquid.VOLATILE BY VOLUME: ö 60-70%VOC CONTENT: - 90-105gm/literSection 4 - Fire and Explosion Hazard DataFlash point: 145° F Method:Pensky-Martens

closed cup ASTM D 93Flammable limits: Not testedLEL: not tested UEL: Not testedPH: Not Applicable DOT#: UN 1268NFPA hazard rating- HFRS (0-Least, 4-Extreme): 2HMIS hazard rating- HFR (0-Least, 4-Extreme): 2Extinguish media: Foam, water spray or fog. Dry chemical powder, CO2, sand orearth may be used for small fires only. Do not discharge extinguishing watersinto the aquatic environment.Special fire fighting procedures: wear full protectove clothing and self-containedbreathing apparatus.Unusual fire and explosion hazards: noneSection 5 - Reactivity DataStability: Conditions to avoid: extreme heat and open flamesHazardous Combustion products:Burning can produce the following combustion products:Oxides of carbon Oxides of nitrogenOxides of silicone Traces of Hydrogen FluorideCarbon monoxide is highly toxic if inhaled; carbon dioxide is sufficient concen-trations can act as a asphyxiant. Acute overexposure to the products of combus-tion may result in irritation of the respiratory tract.Section 6 - Health Hazard DataHarmful or fatal if swallowedCauses eye and skin irritationHarmful if swallowedHarmful if inhaledHarmful if absorbed through skinAspiration may cause lung damageMay cause allergic skin reactionMay cause dizziness and drowsinessMay cause liver and kidney disordersMedical conditions generally aggravated by exposuresame as signs and symptoms of over exposure.Emergency and First Aid Procedures:Eyes: Flush with water for 15 minutes. If irritation persists call a physician.Skin: wash off with soap and clean water for 15 minutes. If irritation persists calla physician.Ingestion: Drink large amounts of water. Call PhysicianInhalation: Remove person to fresh air. If not breathing, administer artificial res-piration including oxygen. Provide medical attention.Section 7 - Precautions for safe handling and useSteps to be taken in case material is released or spilled: soak up with inertabsorbent material.Scoop up and place in a proper waste disposal container.Waste disposal method: Dispose of in accordance with state and local regulations.Precautions to be taken in handling and storing: store in a cool, dry place, out ofdirect sunlight.Do not freeze less than or equal to 32° F or heat above 110° F.Other precautions: KEEP OUT OF REACH OF CHILDREN. Follow directions on thecontainer for proper use of this product.

Section 8 - Control MeasuresRespiratory protection: Ventilate by opening all doors and windows. If exposureabove the TLV or PEL require a niosh approved respirator equipped for the expo-sure or suitable respiratory protection per 29 CFR 1910.134 is required.Ventilation:Local exhaust- if available Special- noneMechanical- if available Other- NoneProtective gloves: Plastic or rubber, chemical resistantEye Protection: Tight fitting, splash, proof safety goggles.Other protective clothing or equipment: chemical resistant clothing.Work hygienic practices: wash hands thoroughly before handling food stuffs,liquids or tobacco products. Use common sense and care around chemicals.Never mix this product with other chemicals. Consult your supervisor for allother hygienic and safety practices. All practices depend on your specific busi-ness. Directions for use normally found on label which will dictate engineeringand control measures.Section 9 - ShippingU.S. Department of Transportation Classification (49CFR)ID # UN1993Proper Shipping Name PETROLEUM DISTILLATES, N.O.S.Class/ Division 3Packing group IIIMarine Pollutant: NoTransportation Class: 55IMDGID # UN1268Proper Shipping Name: PETROLEUM DISTILLATES, N.O.S.Class/ Division 3Packing group IIIIATA (Country variations may apply)Section 10 - Regulatory Information:Toxic Substances Control Act (TSCA): This product and/or all the ingredientscontained in this product have been registered under the Toxic SubstancesControl Act.EPA SARA TITLE III Chemical Listings:Section 302 - Extremely Hazardous Substances:None.Section 304 - CERCLA Hazardous Substances:Cas # Appx. Wt. % Component name1330-20-7 4.5 Xylene100-41-4 1.3 Ethylbenzene108-88-3 Trace TolueneSection 312 - Hazard Class:Acute: Yes Chronic: Yes Fire: YesPressure: No Reactive: NoSection 313 - Toxic Chemicals:Cas # Appx. Wt. % Component name1330-20-7 4.5 Xylene100-41-4 1.3 EthylbenzeneSupplemental State Compliance InformationCalifornia: Warning: This product contains the following chemical(s) listed by the state of California under the Safe Drinking Water and Toxic Enforcement Actof 1986 (Proposition 65) as being known to cause cancer, birth defects or otherreproductive harm.Cas # Appx. Wt. % Component name: 108-88-3 Trace TolueneMassachusetts:Cas # Appx. Wt. % Component name: 1330-20-7 4.5 Xylene100-41-4 1.3 EthylbenzeneNew Jersey:Cas # Appx. Wt. % Component name: 1330-20-7 4.5 Xylene100-41-4 1.3 Ethylbenzene68988-56-7 4-8 Trimethylated silica3555-47-3 Trace Tetra(trimethoxysiloxy) silanePennsylvania:Cas # Appx. Wt. % Component name: 68988-56-7 4-8 Trimethylated silica1330-20-7 4.5 XyleneEPA Hazard Waste: N/ANOTE: Miracle Sealants believes the data set forth are accurate. MiracleSealants makes no warranty with respects thereto and disclaims all liability or reliance thereon. Such data are offered solely for consideration, investigation and verification. Also, the data set forth is for the concentrated finished product. All lab samples are for experimental purposes only and used at the customers discretion.

www.miraclesealants.com

PP RR OO DD UU CC TT DD AA TT AA SS HH EE EE TT

www.miraclesealants.com511 ImpregnatorNatural Look Penetrating Sealer

03_2

003

Water, Stain & Slip Protection for■ Quarry Tile ■ Ceramic Tile ■ Porcelain Tile■ Glazed Tile ■ Marble ■ Granite■ Travertine ■ Medium -Dense Slate ■ Grout■ Quartz ■ Medium -Dense Brick ■ TerrazzoUses■ Interior & Exterior ■ Kitchen ■ Showers■ Restrooms ■ Patios ■ Drive WaysSpecial Features■ Easy to Use ■ Weather Resistant ■ Low Toxicity■ Salt Resistant ■ Non Coating ■ Freeze/Thaw Resistant■ Acid Resistant ■ Non Yellowing ■ Stain Resistant■ Slip Resistant ■ U.V. Transparent ■ Water Resistant

PRODUCT DE SCRIPTIONKEEP OUT OF REACH OF CHILDREN. 511 Impregnator is a unique polymerized sili-cone formulation designed for the protection of all medium to dense porous tile,stone and grout surfaces. 511 Impregnator penetrates into the surface and forms aninvisible barrier that is resistant to moisture and stains, while allowing vapor toescape. 511 Impregnator is not a surface coating and will not alter the natural look.All surfaces are harder and less slippery. 511 Impregnator can be used on interior andexterior applications. 511 Impregnator is U.V. transparent, resists acid rain and willnot yellow under any circumstances. 511 Impregnator averages five to twenty timesthe coverage of competitive products. (See coverage chart).511 Impregnator is on the approved sources list of the United States Postal Serviceand is U.S.D.A. approved for incidental food contact in federal meat and poultryestablishments.Test DataIndependent laboratory tests show 511 Impregnator out performs competitive prod-ucts. Test results are available upon request for Staining, Static Coefficient of Friction,Tabor Abrasion, Surface Absorption, Freeze/Thaw, Vapor Transmission and BacteriaRepellency. NOTE: On more porous surfaces use 511 Porous Plus as directed. For any questionsconcerning grout- refer to the grout manufacturers specifications. 511 Impregnatorwill not stop acid etching.Sample TestingDue to the differences of each substrate, several inconspicuous test patches shouldbe completed to assure maximum performance. User must determine suitability ofthe product for their intended use.Color EnhancementFor added color with “TEXTURED AND NON POLISHED” surfaces, Mira Matte colorenhancer may be applied as directed.Gloss EnhancementFor a higher gloss finish on POLISHED stone surfaces, use Stone Cleaner Preserver,Stone Polish Preserver, Water Ring & Etch Remover, Marble Conditioner, Mira Dustor Mira Pad polishing products. For counters and furniture, use Stone Polish. For tilesurfaces, try Tile Brite.Slip Resistance511 Impregnator increases the static coefficient of friction on all surfaces. 511Impregnator has been used successfully for compliance with the American DisabilityAct’s recommendations for slip resistance (ASTM C 1028-89) on polished & honedsurfaces.Protect Neighboring SurfacesAlways protect neighboring surfaces including wood, carpet, metal, landscaping andother non masonry surfaces.

NEW INSTALL ATIONS - APPLIC ATION INSTRUCTIONSRead entire label and PDS before using. Before Grouting: Apply 511 Impregnator to all surfaces prior to grouting. This stepwill allow quick and easy cleanup after grouting. Grout can stain many surfaces if thisprocedure is not used prior to the grouting process. Apply 511 Impregnator using aMira Brush, Hand/Stand Applicator or a clean towel. Apply enough to wet the sur-face. (See coverage charts) Be careful not to saturate the open grout joints. Allow 511Impregnator to stand for approximately 3 - 5 minutes for maximum penetration. All excess must be removed at this time bybuffing surface with a clean dry towel. This is very important on polished, glazed andporcelain surfaces. Allow 511 Impregnator to cure for 12 - 24 hours before continuing with the grouting procedure.After Grouting: Once grouted, make sure that all grout residue is removed from thesurface with a clean sponge and water. Allow grout to cure per manufacturers specifi-cation. If grout clean up is not performed effectively, an additional cleaning may benecessary to remove remaining grout residue or haze. For this procedure use Pre-Cast Concrete Cleaner (Phosphoric Acid), (GCFR) Grout & Concrete Film Remover(Hydrochloric Acid), Sulfamic Acid Crystals or Epoxy Grout Film Remover followingthe instructions carefully. Once the area has completely dried, proceed with the seal-ing of the grout for water and stain resistance. Apply 511 Impregnator to all groutwith a paint brush. Any excess sealer that gets on the surface should be wiped offwith a clean towel before it dries. On larger jobs grout can be sealed by retreating theentire area including the tile or stone surface a second time. Be careful not to allowthe sealer to puddle or dry on presealed surfaces.

Existing Installation - Surface PreparationSurface must be dry and free of contaminants, including previously applied sealers,dirt, lime & hard water deposits, efflorescence, rust & other heavy dirt and grime.Surface Coating/Wax Removal: To remove existing coatings and/or waxes, use MiraStrip or H2O Strip as directed.Heavy Duty Cleaning: To remove lime and hard water deposits, efflorescence, rust,grease and other heavy dirt and grime use GCFR (Grout & Concrete Film Remover)Pre-Cast Concrete Cleaner or Quarry Kleen as directed.For a non acid deep clean use Liquid Poultice as directed.Light Cleaning: Use Mira Clean #1, Porcelain & Ceramic Tile Cleaner, Tile & GroutCleaner, Mira Soap, Counter Kleen and Stone Cleaner Preserver as directed.Existing Installation - Application InstructionsFollow the application instructions previously mentioned, except now, seal the groutand tile or stone surfaces at the same time. When treating surfaces together, makesure that the recessed grout is saturated.Anti-Slip/Increased Slip ResistanceFor quarry tile, ceramic tile or porcelain tile floors that require additional slip proper-ties to increase static coefficient of friction, use Mira Skidd as directed.

Mold, Mildew and Bacteria SanitationFor best results in killing mold, mildew, bacteria and other micro organisms, useMiracle Disinfectant as directed.

Residue RemovalTo remove accumulated 511 Impregnator residue, use Miracle Residue Remover asdirected.

Color and Gloss EnhancementFor color & gloss enhancement, use Mira Matte, Saltillo & Terra Cotta Paste &Liquid Wax or Mira Shine as directed.

Cure Time511 Impregnator will be dry to the touch in 1 - 3 hours and may be used for normalfoot traffic. For optimum results the area should be kept dry and free from stainingmaterials for 72 hours.Coverage Chart - Used as directed

Cost per 1000 sq.ft. 2000 sq.ft. 3000 sq.ft. 4000 sq.ft.sq.ft/sq.m. 90 sq.m. 180 sq.m. 270 sq.m. 360 sq.m.

Sanded Grout (.06-.11)Quarry Tile (.05-.09)Ceramic Tile (.03-.05)Glazed Tile (.03-.05)Porcelain Tile (.02-.03)Polished Granite (.02-.03)Polished Marble (.02-.03)Terrazzo (.03-.05)Brick (.05-.09)Slate (.05-.09)Quartz (.03-.05)Travertine (.03-.05)Masonry (.05-.09)

Cost per sq.ft. is based on a suggested list price of $95/gallon. 1 gallon = 3.785 litters.

MAINTENANCEFor ongoing maintenance instructions please refer to Miracle Sealants Care Guide.Refer to the Miracle Sealants Product Recommendation Chart for specific productrecommendations.StorageStore 511 Impregnator in the original container, properly sealed to avoid contamina-tion and solvent evaporation. Stored at 770 F (400 C), 511 Impregnator will have ashelf life of 12 months.Technical SupportFor additional technical support, contact Miracle Sealants Company at1-800-350-1901 or 626-443-6433 ext. 3013Office HoursMonday - Friday from 8:30 am - 5:00 pm PT.1-626-443-6433 1-800-350-1901 • Fax: 1-626-443-1435website: www.miraclesealants.comProduct Damaged During TransportationIf product is damaged during transportation contact Info Trac @ 1-800-535-5053Additional ProductMiracle Sealants Company offers a complete line of water & stain repellents, sealers, cleaners, polishing compounds, diamond abrasives, machinery and accessories for the tile, stone, concrete, metal, fabric and carpet professional or do-it-yourself specialist.


511 ImpregnatorNatural Look Penetrating Sealer

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: Name: 511 ImpregnatorSection 1Manufacturers Name: Miracle Sealants CompanyAddress: 12318 Lower Azusa RoadEmergency Phone: 800-350-1901City: ArcadiaState: CAPhone: 626-443-6433Date Prepared: 04-01-2003Section 2 - Hazardous Ingredients/Identity InformationHazardous Components CAS# OSHA PEL ACGIH TLVPetroleum Distillate 64741-65-7 100ppm 150ppmVOC: 760 g/LSection 3 - Physical/Chemical CharacteristicsBoiling point: 355 - 3950 F Specific gravity: 0.80Vapor pressure (200 C): .5 mm hg Melting point: N/AVapor density (Air=1): 5.3 Evaporation rate: < 0.1Solubility in water: Insoluble Density: 798 Kg/M3Appearance and odor: Clear, colorless, aromatic liquid.Section 4 - Fire And Explosion Hazard DataFlash Point: 1250 F (PCC) Flammable limits:LEL: 1 UEL: 7PH: Neutral DOT#: N/ANFPA Hazard rating H F R S (0-Least, 4-Extreme): 1 2 0 0Extinguishing media: Dry chemical, CO2, water fogSpecial fire fighting procedures: Combustible, wear bunker gear and nioshapproved breathing apparatus.Unusual fire and explosion hazards: Cool exposed containers with water toprevent rupturing. Heat will cause phosgene gas.Section 5 - Reactivity DataStability: StableConditions to avoid: Keep away from sources of ignition such as heat,sparks or open flames.Incompatible materials to avoid: Oxidizing agent.Hazardous polymerization: Will not occur.Hazardous decomposition products: Carbon monoxide, carbon dioxide, sili-cone dioxide, fumes of xylene, aromatic and aliphatic hydrocarbons.Section 6 - Health Hazard DataRoutes of entry:Inhalation - PossibleSkin - PossibleIngestion - PossibleHealth hazards - Same as signs and symptoms of exposureOSHA carcinogenicity - None; NTP - None; IARC monographs - NoneSigns and symptoms of over exposureEyes:Causes severe eye irritationSkin: Causes mild skin irritation, drying of the skin. May cause an allergicskin reaction.Ingestion: Harmful if swallowed. Causes vomiting, nausea and diarrhea.Inhalation: Excessive inhalation causes headache, dizziness, nausea andincoordination. Harmful if inhaled.Medical conditions aggravated: Respiratory, pulmonary, liver and kidneydisorders. Central nervous systems disorders. Gastrointestinal disorders.

Emergency and First Aid Procedures:Eyes: In case of contact, immediately flush eyes with plenty of water for atleast 15 minutes. Get medical attention if irritation persists.Skin: Remove contaminated clothing and launder before reuse. Wash withsoap and water. Get medical attention if irritation persists.Ingestion: If swallowed, do not induce vomiting. Get medical attention.Never give anything by mouth to an unconscious person. Inhalation: If inhaled, remove to fresh air. If breathing is difficult, give oxy-gen. If not breathing, give artificial respiration. Seek medical attention.Section 7 - Precautions for Safe Handling and UseSteps to be taken in case material is released or spilled: wipe, scrape orsoak up in an inert material and put in a container for disposal. Wear properprotective equipment. Remove sources of ignition. Increase area ventila-tion.Waste disposal method: disposal should be made in accordance with fed-eral, state and local regulations. Incineration recommended in approvedincinerator according to federal, state and local regulations.Precautions to be taken in handling and storing: use a ground strap. Storeupright in a cool place below 770 F (400 C). Keep container closed when notin use. Avoid breathing vapors. Combustible.Other precautions: KEEP OUT OF REACH OF CHILDREN. Follow directions onthe container for proper use of this product.

Section 8 - Control MeasuresRespiratory protection: Ventilate by opening all doors and windows. If exposure above the TLV or PEL require a niosh approved respiratorequipped for the exposure or suitable respiratory protection per 29 CFR 1910.134 is required.

Protective gloves: Rubber or plastic, chemical resistant.Eye protection: Tight fitting, splash proof safety glasses or goggles.Other protective clothing or equipment: Chemical resistant clothing.Work hygienic practices: Wash hands thoroughly before handling foodstuffs, liquids or tobacco products. Use common sense and care aroundchemicals. Never mix this product with other chemicals. Consult your super-visor for all other hygienic and safety practices. All practices depend onyour specific business. Directions for use normally found on label which willdictate engineering and control measures.

Section 9 - Shipping & Regulatory ClassificationDOT Shipping Name: Please refer to the Bill of Lading receiving/documents

for up-to-date information.

DOT Hazard Class: OSHA Hazard Class: UN/NA Number:EPA Hazard Waste: D 001, IgnitibleCPSC Classification: Combustible liquidTransportation Class: 55Toxic Substances Control Act (TSCA): This product and/or all the ingredients contained in this product have been registered under the Toxic Substances Control Act.NOTE: Miracle Sealants believes the data set forth are accurate. MiracleSealants makes no warranty with respects thereto and disclaims all liabilityor reliance thereon. Such data are offered solely for consideration, investi-gation and verification. Also, the data set forth is for the concentrated fin-ished product. All lab samples are for experimental purposes only and usedat the customers discretion.

WarrantyInstructions are a condensed guide and should not be considered com-plete. In the event of failure, the only obligation of Miracle SealantsCompany shall be to replace such products proven to be defective. Beforeusing, user shall determine the suitability of the product for their intendeduse. User assumes all risks and liability whatsoever in connection therein.Neither seller nor manufacturer shall be liable for any injury or inability touse this product.

Caution511 Impregnator contains combustible petroleum distillates. All solventsmust be considered toxic and must be used in a well ventilated area. Goodventilation means that fresh air is flowing in such a way as to feel a slightbreeze. Open windows and use fans to circulate air. Continue to ventilateuntil vapors are eliminated. Exposure to high vapor concentration must beavoided. Inhaling the vapors can be harmful. Keep away from heat andopen flames. Avoid prolonged contact with skin. Chemical resistant glovesshould be worn at all times. Keep small children and pets out of the areauntil product or surface has thoroughly dried. Refer to the MSDS for addi-tional information.


WARR ANT Y & C AUTIONS


www.miraclesealants.com511 Porous PlusNatural Look Penetrating Sealer

03_2

003

Water, Stain & Slip Protection for■ Grout ■ Flamed, Honed & Polished Limestone■ Flamed, Honed & Polished Granite■ Flamed, Honed & Polished Marble■ Saltillo Tile ■ Terra Cotta Pavers ■ Masonry■ Sandstone ■ Porous Slate & Brick ■ Cement■ Concrete ■ Cantera/Adoquin ■ Flagstone■ Sanded Grout ■ Stucco

Uses■ Interior & Exterior ■ Kitchens ■ Showers■ Restrooms ■ Patios ■ Drive Ways■ Garages ■ Pool Areas ■ Walls

Special Features■ Water Resistant ■ Stain Resistant ■ Weather Resistant■ Acid Resistant ■ Salt Resistant ■ Freeze/Thaw Resistant■ Slip Resistant ■ Easy To Use ■ Low Toxicity■ Non Yellowing ■ Non coating ■ U.V. Transparent

PRODUCT DE SCRIPTIONKEEP OUT OF REACH OF CHILDREN. 511 Porous Plus is a unique formulationdesigned for the protection of all porous tile, stone and grout surfaces. 511 PorousPlus penetrates into the surface and forms an invisible barrier that is resistant tomoisture and stains, while allowing vapor to escape. 511 Porous Plus is not a surfacecoating and will not alter the natural look. All surfaces are harder and less slippery.511 Porous Plus can be used on interior and exterior applications. 511 Porous Plus isU.V. transparent, resists acid rain and will not yellow under any circumstances. 511Porous Plus averages 2 to 10 times the coverage of competitive products. (See cover-age chart).

511 Porous Plus is on the approved sources list of the United States Postal Serviceand is U.S.D.A. approved for incidental food contact in federal meat and poultryestablishments.

Test DataIndependent laboratory tests show 511 Porous Plus out performs competitive products. Test results are available upon request for Staining, StaticCoefficient of Friction, Tabor Abrasion, Surface Absorption, Freeze/Thaw, and VaporTransmission.

NOTE: For any questions concerning grout - refer to the grout manufacturers specifications. 511 Porous Plus will not stop acid etching.

Sample TestingDue to the differences of each substrate, several inconspicuous test patches shouldbe completed to assure maximum performance. User must determine suitability ofthe product for their intended use.

Color and Gloss EnhancementFor added color with “Textured and Non polished” surfaces, Mira Matte may beused. For porous type “Paver”, Saltillo & Terra Cotta Paste & Liquid Wax, StonePolish, Stone Polish Preserver, Granite Brite, Mira Brite, Mira Dust, MarbleConditioner or Tile Brite may be used as directed.

Protect Neighboring SurfacesAlways protect neighboring surfaces including wood, carpet, metal , landscaping andother non masonry surfaces.

NEW INSTALL ATIONS - APPLIC ATION INSTRUCTIONSRead entire label and PDS before using.

Sealing As a Grout ReleaseApply 511 Porous Plus to all surfaces prior to grouting. This step will allow quick andeasy cleanup after grouting. Grout can stain many surfaces if this procedure is notused prior to the grouting process. Apply 511 Porous Plus using a Mira Brush,Hand/Stand Applicator or a clean towel. Apply enough to wet the surface. (See cov-erage charts) Be careful not to saturate the open grout joints. Allow 511 Porous Plusto stand for approximately 3 - 5 minutes for maximum penetration. Any excess sealerremaining at this time should be removed by wiping the surface with a clean drytowel. On very porous surfaces apply another application after the previous applica-tion has dried 2-3 hours. Any excess sealer that has dried on the surface creating aresidue/film, may be removed by applying Residue Remover. Apply ResidueRemover undiluted to the affected area with a clean dry towel. Let it sit for 1 - 2 min-utes before buffing the area with a second clean dry towel. Allow 511 Porous Plus tocure for 12-24 hours before continuing with the grouting procedure per manufactur-ers specification.

After Grouting: Once grouted, make sure that all grout residue is removed from thesurface with a clean sponge and water. Allow grout to dry at least 24 - 72 hours.

If grout clean up is not performed effectively, an additional cleaning may be neces-sary to remove remaining grout residue or haze. For this procedure use Pre-CastConcrete Cleaner (Phosphoric Acid), (GCFR) Grout & Concrete Film Remover(Hydrochloric Acid), Sulfamic Acid Crystals or Epoxy Grout Film Remover followingthe instructions carefully.

Grout SealingOnce the area has completely dried, proceed with the sealing of the grout for waterand stain resistance. Apply 511 Porous Plus to all grout with a paint brush. Anyexcess sealer that gets on the surface should be wiped off with a clean towel before

it dries. On larger jobs grout can be sealed by retreating the entire area including thetile or stone surface a second time. Be careful not to allow the sealer to puddle or dryon presealed surfaces.

Residue RemovalTo remove accumulated 511 Porous Plus residue, use Miracle Residue Remover asdirected.

Existing Installation - Surface PreparationSurface must be dry and free of contaminants, including previously applied sealers,dirt, lime & hard water deposits, efflorescence, rust & other heavy dirt and grime.

Floor Coating/Wax Removal: To remove existing coatings and/or waxes, use MiraStrip or H2O Strip following the instructions carefully.

Heavy Duty Cleaning: To remove lime and hard water deposits, efflorescence, rust,grease and other heavy dirt and grime use GCFR (Grout & Concrete Film Remover),Pre-Cast Concrete Cleaner or Quarry Kleen as directed. For a non-acid deep cleanuse Liquid Poultice as directed. All strippers and/or cleaners should be thoroughlyrinsed with clean water and the surface allowed to dry.

Sealing Existing Surfaces: Follow the application instructions previously mentioned,except now, seal the grout and tile or stone surfaces at the same time. When treatingsurfaces together, make sure that the recessed grout is saturated.

Light Cleaning: Use Mira Clean #1, Porcelain & Ceramic Tile Cleaner, Tile & GroutCleaner, Mira Soap, Stone Cleaner Preserver & Counter Kleen.

Anti-Slip/Increased Slip ResistanceFor quarry tile, ceramic tile or porcelain tile floors that require additional slip proper-ties to increase static coefficient of friction, use Mira Skidd as directed.


Sealer Cure Time511 Porous Plus will be dry to the touch in 1 - 3 hours and may be used for normalfoot traffic. For optimum results the area should be kept dry and free from stainingmaterials for 24 - 72 hours.

Coverage Chart - used as directedMaterial Cost per 500 sq.ft. 1000 sq.ft. 1500 sq.ft. 2000 sq.ft.

sq.ft/sq.m. 45 sq.m. 90 sq.m. 135 sq.m. 180 sq.m.

Sanded Grout (.15-.28)Limestone (.15-.28)Saltillo (.15-.45)Sand Stone (.15-.28)Flag Stone (.15-.28)Flamed Granite (.15-.28)Textured Marble (.15-.28)Brick (.15-.28)Concrete (.15-.45)Stucco (.22-.45)Slate (.15-.28)Terra Cotta (.15-.45)Cantera/Adoquin (.15-.45)Masonry (.15-.45)Polished Stone Cost per sq. ft/3000-4000 sq.ft. (.05 - .07)

Cost per sq.ft. is based on a suggested list price of $225/gallon. 1 gallon = 3.785 litters.

MAINTENANCEFor ongoing maintenance instructions please refer to Miracle Sealants Care Guide.Refer to the Miracle Sealants Product Recommendation Chart for specific productrecommendations.

StorageStore 511 Porous Plus in the original container, properly sealed to avoid contamina-tion and solvent evaporation. Stored at 770 F (400 C), 511 Porous Plus will have a shelflife of 12 months.

Technical SupportFor additional technical support, contact Miracle Sealants Company at1-800-350-1901 or 626-443-6433 ext. 3013

Office HoursMonday - Friday from 8:30 am - 5:00 pm PT. 1-626-443-6433 1-800-350-1901 • Fax: 1-626-443-1435 website: www.miraclesealants.com

Product Damaged During TransportationIf product is damaged during transportation contact Info Trac @ 1-800-535-5053

Additional ProductsMiracle Sealants Company offers a complete line of water & stain repellents, sealers,cleaners, polishing compounds, diamond abrasives, machinery and accessories forthe tile, stone, concrete, metal, fabric and carpet professional or do-it-yourself spe-cialist


511 Porous PlusNatural Look Penetrating Sealer

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: Name: 511 Porous Plus

Section 1Manufacturers Name: Miracle Sealants CompanyAddress: 12318 Lower Azusa RoadEmergency Phone: 800-350-1901City: ArcadiaState: CAPhone: 626-443-6433Date Prepared 04-01-2003Section 2 - Hazardous Ingredients/Identity InformationHazardous Components CAS# OSHA PEL ACGIH TLVPetroleum Distillate 64741-65-7 100ppm 150ppmButyl Acetate 123-86-4 150ppm 150ppmN-Heptane 142-82-5 500ppm 400ppmEthyl Acetate 141-78-6 400ppm 400ppmVOC: 760 g/LSection 3 - Physical/Chemical CharacteristicsBoiling Point: 3200 F Specific Gravity: 0.80Vapor Pressure: Not Tested Melting Point: Not TestedVapor Density: Not Tested Evaporation Rate: Not TestedSolubility In Water: InsolubleAppearance and Odor: Colorless, Solvent OdorSection 4 - Fire And Explosion Hazard DataFlash Point: 1450 F Flammable Limits: Not TestedLEL: Not Tested UEL: Not TestedPH: Neutral DOT#: N/ANFPA Hazard Rating H F R S (0-Least, 4-Extreme): 1 2 0 0Extinguishing media: CO2, Dry foamSpecial fire fighting procedures: Combustible - wear full bunker gear andNIOSH approved breathing apparatus.Unusual fire and explosion hazards: cool exposed containers with water toprevent rupturing. Heat will cause phosgene gas.Section 5 - Reactivity DataStability: StableConditions to avoid: Keep away from heat, flame & sparksIncompatible materials to avoid: Heat, flames, strong oxidizerHazardous polymerization: NoneHazardous decomposition product: CO2, CO, HFSection 6 - Health Hazard DataRoutes of Entry:Inhalation - PossibleSkin - PossibleIngestion - PossibleHealth hazards - Same as signs and symptoms of exposureOSHA Carcinogenicity - None; NTP - None; IARC Monographs - NoneSigns and Symptoms of Over ExposureEyes:Burning irritation.Skin: Slight irritation, defatting of the skin. Material will place a clear coat-ing onto skin.Ingestion: ToxicInhalation: Irritation, dizziness, headaches - may cause CNS depression.Medical conditions aggravated: Same as signs and symptoms of over expo-sure.

Symptoms can include but are not limited to irritation of respiratory track,dizziness and light headaches.Emergency and First Aid Procedures:Eyes: Flush with water for 15 minutes. If irritation persists, call physician.Skin: Wash with soap and water. If irritation persists, call physician.Ingestion: Do not induce vomiting. Call physician. Keep victim’s head belowhips to prevent aspiration.Inhalation: Get person to fresh air. If unconscious, call a physician.Section 7 - Precautions For Safe Handling And UseSteps to be taken in case material is released or spilled: soak up with inert,absorbent material. Scoop up and place in a proper disposal container.Waste disposal method: dispose of in accordance with state and local regulations. Precautions to be taken in handling and storing: store in a cool, dry placeout of direct sunlight. Do not freeze or heat above 1100 fOther precautions: KEEP OUT OF REACH OF CHILDREN. Follow directions onthe container for proper use of this product.Section 8 - Control MeasuresRespiratory protection: Ventilate by opening all doors and windows. If exposure above the TLV or PEL require a niosh approved respiratorequipped for the exposure or suitable respiratory protection per 29 CFR 1910.134 is required.VentilationLocal Exhaust - Recommended Special - NoneMechanical - Recommended Other - NoneProtective gloves: Rubber or plastic, chemical resistant.Eye protection: Tight fitting, splash proof safety glasses or goggles.Other protective clothing or equipment: Chemical resistant clothing.Work hygienic practices: Wash hands thoroughly before handling foodstuffs, liquids or tobacco products. Use common sense and care aroundchemicals. Never mix this product with other chemicals. Consult your super-visor for all other hygienic and safety practices. All practices depend onyour specific business. Directions for use normally found on label which willdictate engineering and control measures.Section 9 - Shipping & Regulatory ClassificationDOT Shipping Name: Please refer to the Bill of Lading receiving/documents

for up-to-date information.DOT Hazard Class: OSHA Hazard Class: UN/NA Number:EPA Hazard Waste: D 001, IgnitibleCPSC Classification: Combustible LiquidTransportation Class: 55Toxic Substances Control Act (TSCA): This product and/or all the ingredi-ents contained in this product have been registered under the ToxicSubstances Control Act.NOTE: Miracle Sealants believes the data set forth are accurate. MiracleSealants makes no warranty with respects thereto and disclaims all liabilityor reliance thereon. Such data are offered solely for consideration, investi-gation and verification. Also, the data set forth is for the concentrated fin-ished product. All lab samples are for experimental purposes only and usedat the customers discretion.

WarrantyInstructions are a condensed guide and should not be considered com-plete. In the event of failure, the only obligation of Miracle SealantCompany shall be to replace such products proven to be defective. Beforeusing, user shall determine the suitability of the product for their intendeduse. User assumes all risks and liability whatsoever in connection therein.Neither seller nor manufacturer shall be liable for any injury or inability touse this product.

Caution511 Porous Plus contains combustible petroleum distillates. All solventsmust be considered toxic and must be used in a well ventilated area. Goodventilation means that fresh air is flowing in such a way as to feel a slightbreeze. Open windows and use fans to circulate air. Continue to ventilateuntil vapors are eliminated. Exposure to high vapor concentration must beavoided. Inhaling the vapors can be harmful. Keep away from heat andopen flames. Avoid prolonged contact with skin. Chemical resistant glovesshould be worn at all times. Keep small children and pets out of the areauntil product or surface has thoroughly dried. Refer to MSDS for additionalinformation.




www.miraclesealants.com511 H20

03_2

003

Water & Stain Protection For■ Grout ■ Quarry Tile ■ Ceramic Tile ■ Glazed Tile■ Granite ■ Marble ■ Limestone ■ Terrazzo■ Saltillo Tile ■ Slate ■ Flagstone ■ Concrete■ Brick ■ Travertine ■ Porcelain Tile

Uses■ Kitchens ■ Bathrooms ■ Showers ■ Health■ Driveways ■ Patios ■ Garages ■ Facilities

Special Features■ Easy to Use ■ Interior & Exterior Use ■ Oil Resistant■ VOC Compliant ■ Retains Natural Color ■ Odorless■ Non FlammableNO PERFLUOROCTANE SULFONATE (PFOS); NO PERFLUOROCTANOIC ACID (PFOA)

PRODUCT DE SCRIPTIONKEEP OUT OF REACH OF CHILDREN. 511 H2O is a unique water base formulationdesigned for the protection of all surfaces where a water base product is required.511 H2O penetrates into the surface and forms an invisible barrier that is resistant tomoisture and stains, while allowing vapor to escape. 511 H2O is not a surface coatingand will not alter the natural look. 511 H2O can be used on interior and exterior appli-cations. NO (PFOS) or (PFOA)

Test DataIndependent laboratory tests show 511 H2O out performs competitive products. Testresults are available upon request for Staining, Static Coefficient of Friction, TaborAbrasion, Surface Absorption, Freeze/Thaw and Vapor Transmission.

NOTE: For any questions concerning grout-refer to the grout manufacturers specifica-tions. 511 H2O will not stop acid etching.

Slip Resistance511 Porous Plus increases the static coefficient of friction on all surfaces. 511 Porous Plus has been used successfully for compliance with the AmericanDisability Act’s recommendations for slip resistance (ASTM C 1028-89) on polished &honed surfaces.

Sample TestingDue to the differences of each material, several inconspicuous test patches shouldbe completed to assure maximum performance. User must determine suitability ofthe product for their intended use.

Protect Neighboring SurfacesAlways protect neighboring surfaces including wood, carpet, metal, landscaping andother non masonry surfaces.

NEW INSTALL ATIONS - APPLIC ATION INSTRUCTIONSRead entire label and PDS before using.

Sealing As a Grout ReleaseApply 511 H2O to all surfaces prior to grouting. This step will allow quick and easycleanup after grouting. Grout can stain many surfaces if this procedure is not usedprior to the grouting process. Apply 511 H2O using a Miracle Applicator or a cleantowel. Apply enough to wet the surface. Be careful not to saturate the open groutjoints. Allow 511 H2O to stand for approximately 3 - 5 minutes for maximum penetra-tion. All excess must be removed at this time by buffing surface with a clean drytowel. This is very important on polished, glazed surfaces, and porcelain surfaces.Allow 511 H2O to cure for 12 - 24 hours before continuing with the grouting proce-dure.

After Grouting: Once grouted, make sure that all grout residue is removed from thesurface with a clean sponge and water. Allow grout to dry at least 24 - 72 hours. Ifgrout clean up is not performed effectively, an additional cleaning may be necessaryto remove remaining grout residue or haze. For this procedure use Pre-Cast ConcreteCleaner, GCFR (Grout, Concrete & Film Remover) or Epoxy Grout Film Remover asdirected.

Grout SealingOnce the area has completely dried, proceed with the sealing of the grout for waterand stain resistance. Apply 511 H2O to all grout with a thin paintbrush. Any excesssealer that gets on the surface should be wiped off with a clean towel before itdries.On larger jobs, grout can be sealed by retreating the entire area including thetile or stone surface a second time. Be careful not to allow sealer to puddle or dry onpresealed surfaces.

Existing Installations - Surface PreparationsSurface must be dry and free of contaminants, including previously applied sealers,dirt, lime & hard water deposits, efflorescence, rust & other heavy dirt and grime.

Floor Coating/Wax Removal: To remove existing coatings and/or waxes, use MiraStrip or H2O Strip per the instructions.

Heavy Duty Cleaning: To remove lime and hard water deposits, efflorescence, rust,grease and other heavy dirt and grime use GCFR (Grout & Concrete Film Remover),Pre-Cast Concrete Cleaner or Quarry Kleen as directed. For a non-acid deep cleanuse Liquid Poultice as directed.

Light Duty Cleaning: Use Mira Clean #1, Porcelain & Ceramic Tile Cleaner, Tile &Grout Cleaner, Counter Kleen, Mira Soap or Stone Cleaner Preserver as directed.

Anti-Slip/Increased Slip ResistanceFor quarry tile, ceramic tile or porcelain tile floors that require additional slip proper-ties to increase static coefficient of friction, use Mira Skidd as directed.


Color & Gloss EnhancementFor color and gloss enhancement, use Mira Matte, Saltillo & Terra Cotta Paste &Liquid Wax or Mira Shine as directed.

Existing Installations - Application Instructions:Follow the application instructions previously mentioned, except now, seal the groutand tile or stone surface at the same time. When treating surfaces together, makesure that the recessed grout is saturated with sealer.

Cure Time511 H2O will be dry to the touch in 1 - 3 hours and may be put into service. For opti-mum results the area should be kept dry and free from staining materials for 24 - 72hours.

CoverageCoverage will vary depending on the density, porosity, texture, surface absorption,weather, time solution left on surface and application methods. Used as directed, 511H2O will cover between 500 - 3,000 sq.ft. per gallon (45 - 270 square meters per3.785 liters).

MAINTENANCEFor ongoing maintenance instructions please refer to Miracle Sealants Care Guide.Refer to the Miracle Sealants Product Recommendation Chart for specific productrecommendations.

StorageStore 511 H2O in the original container, properly sealed to avoid contamination andevaporation. Stored at 770 F (400 C), 511 H2O will have a shelf life of 12 months. Donot allow to freeze.


Office HoursMonday - Friday from 8:30 am - 5:00 pm PT.1-626-443-6433 or 1-800-350-1901 • Fax: 1-626-443-1435website: www.miraclesealants.com


WarrantyInstructions are a condensed guide and should not be considered complete. In theevent of failure, the only obligation of Miracle Sealants Company shall be to replacesuch products proven to be defective. Before using, user shall determine the suitabil-ity of the product for their intended use. User assumes all risks and liability whatso-ever in connection therein. Neither seller nor manufacturer shall be liable for anyinjury or inability to use this product.

CautionWarning: Detectable amounts of chemicals known to the State of California tocause cancer, birth defects or other reproductive harm may be found in this product.511 H2O may cause irritation of eyes and skin. Avoid contact and prolonged breath-ing. Use in a well ventilated area. Good ventilation means that fresh air is flowing insuch a way as to feel a slight breeze. Open windows and use fans to circulate air.Continue to ventilate until vapors are eliminated. Exposure to high vapor concentra-tion must be avoided. Inhaling the vapors can be harmful. Keep away from heat andopen flames. Avoid prolonged contact with skin. Chemical resistant gloves should beworn at all times. Keep small children and pets out of area until product or surfaceshas thoroughly dried. Refer to the MSDS for additional information.

Additional ProductsMiracle Sealants Company offers a complete line of water & stain repellents, sealers,cleaner, polishing compounds, diamond abrasives, machinery and accessories forthe tile, stone, concrete, metal, fabric and carpet professional or do-it yourself spe-cialist.


511 H20

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of LaborIdentity No: Name: 511 H2O

Section 1Manufacturers Name: Miracle Sealants CompanyAddress: 12318 Lower Azusa RoadEmergency Phone: 800-350-1901City: ArcadiaState: CAPhone: 626-443-6433Date Prepared: 04-01-2003

Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS # OSHA PEL ACGIH TLVWater 7732-18-6 – –Polymer 196316-34-4 – –N-Methylpyrolidone 872-50-4 – –VOC Content: None

Section 3 - Physical/Chemical CharacteristicsBoiling point: 2120FVapor pressure (680F): < 1 Vapor density (Air=1): > 1Solubility in water: Soluble Specific gravity (H20 = 1): ̃0.982pH: 4-6 Volatile by volume: ̃98%VOC exempt components: 100% (Water & solids)Evaporation rate(Ether = 1): < 1Appearance and odor: Milky white, slight odor

Section 4 - Fire And Explosion Hazard DataFlash point: None (TOC) Flammable limits: N/DLEL: N/D UEL: N/D DOT#: NoneNFPA Hazard rating - H F R S (0-Least, 4-Extreme): 1 0 0 0Extinguishing media: Water, dry chemical, CO2, foam

Special fire fighting procedures: A self-contained breathing apparatus andprotective clothing should be worn in fighting fires involving chemicals.Unusual fire and explosion hazards: Material is non-flammable & non-com-bustible.

Section 5 - Reactivity DataStability: StableConditions to avoid: NoneIncompatible materials to avoid: NoneHazardous polymerization: Will not occurHazardous decomposition or by-products: Thermal decomposition can pro-duce CO2, CO, possible traces of HF.

Section 6 - Health Hazard DataRoutes of entry:Inhalation - Possible Skin - PossibleEyes - Possible Ingestion - PossibleHealth Hazards - Same as signs & symptoms of over exposureCarcinogenicity: NTP - No; Monograph - No; OSHA regulated - No

Signs & Symptoms of Over Exposure:Eyes: Very mild eye irritant. Direct contact with the solution may causeslight irritant & conjunctive irritation. No permanent damage is anticipated.Skin: can be mildly irritating upon prolonged exposure.Ingestion: can cause gastrointestinal irritation, nausea, vomiting & diarrhea.Inhalation: gross over-inhalation may cause symptoms such as but not lim-ited to, coughing, may aggravate pre-existing lungs disorders.

Emergency and First Aid Procedures:

Eyes: Flush immediately with clean, free-flowing water for 15 minutes.Consult a physician if irritation persists.Skin: Wash thoroughly with soap and water.Inhalation: Remove to fresh air. If not breathing, give artificial respirationincluding oxygen. Call physician.Ingestion: Extremely low toxicity (water based product). Give a quart ormore of water to drink and induce vomiting. Provide medical attention.Never administer liquid by mouth to unconscious person.

Section 7 - Precautions For Safe Handling And UseSteps to be taken in case material is released or spilled: observe precau-tions from other sections. Collect any spills with absorbent material such asvermiculite, place collected material in a polyethylene lined metal containerand seal. Clean up residue with water.

Waste disposal method: dispose of in accordance with federal, state, andlocal regulations.

Storage and handling information: keep from freezing. Store in a cool darkplace. Keep container dry and tightly closed when not in use.

KEEP OUT OF REACH OF CHILDREN.

Section 8 - Control MeasuresRespiratory protection: Ventilate by opening all doors and windows. If exposure above the TLV or PEL require a niosh approved respiratorequipped for the exposure or suitable respiratory protection per 29 CFR 1910.134 is required.Local exhaust: Recommended. Mechanical exhaust: General ventilation system should be provided.

Special: None Other: None

Protective gloves: Plastic or rubber, chemical resistant.Eye protection: Tight fitting, splash proof safety goggles.Other protective clothing or equipment: Chemical resistant clothing

Work hygienic practices: Wash hands thoroughly before handling foodstuffs, liquids or tobacco products. Use common sense and care aroundchemicals. Never mix this product with other chemicals. Consult your super-visor for all other hygienic and safety practices. All practices depend onyour specific business. Directions for use normally found on label which willdictate engineering and control measures.

Section 9 - Shipping & Regulatory ClassificationDOT Shipping Name: Non-Hazardous Liquid, N.O.I. Please refer to the Bill of

Lading receiving/documents for up-to-date informa-tion.

DOT Hazard Class: N/AOSHA Hazard Class: N/AUN/NA Number: N/AEPA Hazard Waste: N/ACPSC Classification: N/ATransportation Class: 55

N-Methylpyrolidone is listed on California Prop 65.

Toxic Substances Control Act (TSCA): This product and/or all the ingredients contained in this product have been registered under the ToxicSubstances Control Act.

NOTE: Miracle Sealants believes the data set forth are accurate. MiracleSealants makes no warranty with respects thereto and disclaims all liabilityor reliance thereon. Such data are offered solely for consideration, investi-gation and verification. Also, the data set forth is for the concentrated fin-ished product. All lab samples are for experimental purposes only and usedat the customers discretion.




511 CSTPenetrating Concrete Surface Treatment

03_2

003

Water, Stain & Slip Protection ForAll concrete and masonry surfaces.Uses■ Interior & Exterior Use ■ Loading Docks ■ Drive Ways■ Restrooms ■ Garages ■ Building■ Patios ■ Walls ■ Exterior Facades■ BridgesSpecial Features■ Weather Resistant ■ Freeze/Thaw Resistant ■ Easy to Use■ Salt Ion Resistant ■ Acid Resistant ■ Non Yellowing■ U.V. Transparent ■ Less Slippery ■ Low Toxicity■ Stain Resistant ■ Water Resistant

PRODUCT DE SCRIPTIONKEEP OUT OF REACH OF CHILDREN. 511 Concrete Surface Treatment (CST)is a unique polymerized formulation designed for the protection of all con-crete products. 511 CST forms an invisible barrier that is resistant to mois-ture and stains while allowing vapor to escape. Concrete surfaces will resistspalling and damage by salt ion intrusion in addition to having excellentfreeze/thaw performance. INDEPENDENT LABORATORY TESTS SHOW 511CST OUT PERFORMS COMPETITIVE PRODUCTS. NOTE: For any questions concerning grout or mortar refer to the manufacturers specification.Sample TestingDue to the differences of each material, several inconspicuous test patchesshould be completed to assure maximum performance. User must deter-mine suitability of the product for their intended use.Protect Neighboring SurfacesAlways protect neighboring surfaces including wood, carpet, metal, land-scaping and other non masonry surfaces

NEW INSTALL ATIONS - APPLIC ATION INSTRUCTIONSRead entire label and PDS before using. Apply the appropriate Miracle Penetrating Sealer using a Mira Brush,Hand/Stand Applicator or clean white towel or cloth. On large jobs or verti-cal applications a pump type sprayer may be used. Saturate the surfacebeing careful not to allow sealer into the open ungrouted joints. For themost porous surfaces a second application should be applied after the firsthas dried at least 2 - 8 hours. Allow the second application to stand for 3 - 5minutes before removing any excess with a clean dry towel. The 511 Sealantmust cure 12 - 24 hours before proceeding with the grouting process. Anyexcess sealer that has dried on the surface creating a residue/film, may beremoved by applying Residue Remover. Apply Residue Remover undilutedto affected area with a clean dry towel. Let sit for 1 - 2 minutes before buff-ing area clean with a second clean dry towel. Grout the surface per themanufacturer’s instructions. Clean all grout/mortar residues completelywith a sponge and clean water. If grout clean up is not performed effective-ly, additional cleaning may be necessary to remove any remaining groutresidue or haze. For this procedure, we recommend using Pre-CastConcrete Cleaner (phosphoric acid) or Grout & Concrete Film Remover(GCFR) (hydrochloric acid) as directed.Allow grout to cure per manufacturer’s specification. Once the surfaceshave completely cured, proceed with the sealing of the grout joints forwater and stain resistance. Poured Concrete: When dealing with green concrete in areas subjected tohigh traffic and/or stains, 511 CST can be applied before the concrete hascompletely dried. Although 511 CST does allow moisture to escape it mayslow down the evaporation process.Existing Installation - Surface PreparationPoured Concrete: Surface must be dry and free of contaminants, includingpreviously applied sealers, dirt, lime & hard water deposits, efflorescence,rust & other dirt and grime.Surface Coating/Wax Removal: To remove existing coatings and/or waxesuse Mira Strip or H2O Strip per the instructions.Heavy Duty Cleaning: To remove lime and hard water deposits, efflores-cence, rust and other heavy dirt and grime use Pre-Cast Concrete Cleaner(Phosphoric Acid), (GCFR) Grout & Concrete Film Remover (HydrochloricAcid) or Sulfamic Acid Crystals. Check with concrete manufacturer for spec-ifications. For a non acid deep clean, use Liquid Poultice as directed. Allstrippers and/or cleaners should be thoroughly rinsed with clean water andallowed to dry.

Light Duty Cleaning: Use Mira Clean #1, Tile & Grout Cleaner, CounterKleen or diluted Pre-Cast Concrete Cleaner.Anti-Slip/Increased Slip ResistanceFor quarry tile, ceramic tile, porcelain tile and concrete floors that requireadditional slip properties to increase static coefficient of friction, use MiraSkidd as directed.Mold, Mildew and Bacteria SanitationFor best results in killing mold, mildew, bacteria and other micro organizes,use Miracle Disinfectant as directed.Residue RemovalTo remove accumulated 511 CST residue, use Residue Remover as directed.Existing Installations - Application Instruction1st Application: Apply 511 CST using a Mira Brush, Hand/Stand Applicatoror a clean towel. On large exterior applications a sprayer may be used.Saturate the area allowing to stand for 3 - 5 minutes for maximum protec-tion. Any excess should be removed with a clean dry towel.2nd Application: Let the first application dry for at least 12 - 24 hours beforeapplying the second. Apply the second in the same manner as before.Cure TimeThe surface will be dry to the touch within 3 - 5 hours and completely curedin 72 hours.Coverage (Used as directed)1st Application: 250 - 500 square feet per gallon (23 - 46 square meters per3.785 liters)2nd Application: 500 - 1000 square feet per gallon (45 - 90 square metersper 3.785 liters)

MAINTENANCEFor ongoing maintenance instructions please refer to Miracle Sealants CareGuide. Refer to the Miracle Sealants Product Recommendation Chart forspecific product recommendations.StorageStore 511 CST in the original properly sealed container to avoid contamina-tion and solvent evaporation. Stored at 770 F (400 C), 511 CST will have ashelf life of 12 months.Technical SupportFor additional technical support, contact Miracle Sealants Company at1-800-350-1901 or 626-443-6433 ext. 3013Office HoursMonday - Friday from 8:30 am - 5:00 pm PT.1-626-443-6433 or 1-800-350-1901 • Fax: 1-626-443-1435website: www.miraclesealants.comProduct Damaged During TransportationIf product is damaged during transportation contact Info Trac @ 1-800-535-5053Additional ProductsMiracle Sealants Company offers a complete line of water & stain repellents, sealers, cleaner, polishing compounds, diamond abrasives,machinery and accessories for the tile, stone, concrete, metal, fabric andcarpet professional or do-it yourself specialist.WarrantyInstructions are a condensed guide and should not be considered com-plete. In the event of failure, the only obligation of Miracle SealantsCompany shall be to replace such products proven to be defective. Beforeusing, user shall determine the suitability of the product for their intendeduse. User assumes all risks and liability whatsoever in connection therein.Neither seller nor manufacturer shall be liable for any injury or inability touse this product.Caution511 CST contains combustible petroleum distillates. All solvents must beconsidered toxic and must be used in a well ventilated area. Good ventila-tion means that fresh air is flowing in such a way as to feel a slight breeze.Use open windows and fans to circulate air. Continue to ventilate untilvapors are eliminated. Exposure to high vapor concentration must be avoid-ed. Inhaling the vapors can be harmful. Keep away from heat and openflames. Avoid prolonged contact with skin. Chemical resistant gloves shouldbe worn at all times. Keep small children and pets out of area until productor surface has thoroughly dried. Refer to the MSDS for additional informa-tion.


511 CSTPenetrating Concrete Surface Treatment

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: 6418 Name: 511 CST


Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS # OSHA PEL ACGIH TLVPetroleum Distillate 64741-65-7 100ppm 150pmVOC: 690 g/L

Section 3 - Physical/Chemical CharacteristicsBoiling point: 3700 F Specific gravity: .820Vapor pressure: (200C) 0.5 mm Hg Melting point: N/AVapor density: (Air=1) 5.3 Evaporation rate: (by AC=1) < 0.1Solubility in water: InsolubleAppearance and odor: Colorless, solvent odor

Section 4 - Fire And Explosion Hazard DataFlash point: 1350 F Flammable limits: Not testedLEL: Not tested UEL: Not testedPH: Neutral DOT#: N/ANFPA Hazard rating - H F R S (0-Least, 4-Extreme): 1 2 0 0

Extinguishing media: CO2, dry foam, water fog.Special fire fighting exposure: Wear full bunker gear and niosh approvedbreathing apparatus.Unusual fire and explosion hazards: Containers exposed to intense heatfrom fires should be cooled with water to prevent vapor pressure build upwhich could result in container rapture.

Section 5 - Reactivity DataStability: StableConditions to avoid: Heat, flame contact with strong oxidizing agents.Incompatible materials to avoid: Strong oxidizers.Hazardous polymerization: None.Hazardous decomposition products: CO2

Section 6 - Health Hazard DataRoutes of Entry:Inhalation - PossibleSkin - PossibleIngestion - PossibleHealth Hazards - Same as signs and symptoms of overexposure.OSHA Carcinogenicity - None; NTP - None; IARC Monographs - None

Signs and Symptoms of Overexposure:Eyes: Burning irritation.Skin: Irritation.Ingestion: Toxic.Inhalation: Dizziness, headache.Medical Conditions Aggravated: Same as signs and symptoms of overexposure.

Emergency and First Aid ProceduresEyes: Flush with water for 15 minutes. If irritation persists, call a physician.Skin: Wash with soap and water; if irritation persists, call a physician.Ingestion: Do not induce vomiting. Call a physician.Inhalation: Get person to fresh air. If unconscious, call a physician

Section 7 - Precautions For Safe Handling And UseSteps to be taken in case material is released or spilled: Soak up with inert,absorbent material. Scoop up and place in proper waste disposal container.

Waste disposal method: Dispose of in accordance with federal, state andlocal regulations.

Precautions to be taken in handling and storing: store in a cool, dry place,out of direct sunlight. Do not freeze or heat above 1100 F.

Other precautions: KEEP OUT OF REACH OF CHILDREN. Follow directions onthe container for proper use of this product.


Ventilation: Local exhaust - If available Special - NoneMechanical - If available Other - None

Protective gloves: Rubber or plastic, chemical resistant.Eye protection: Tight fitting, splash proof safety glasses or goggles.Other protective clothing or equipment: Chemical resistant clothing.




DOT Hazard class:OSHA Hazard class: UN/NA Number: EPA Hazard waste: D 001, IgnitibleCPSC Classification: Combustible liquidTransportation Class: 55

Toxic Substances Control Act (TSCA): This product and/or all the ingredi-ents contained in this product have been registered under the ToxicSubstances Control Act.




www.miraclesealants.comGrout Sealer

03_2

003

Water & Stain Protection ForAll Sanded & Non-sanded Grout and Mortar Joints.Uses■ Kitchen Counters ■ Kitchen Floors ■ Bathroom Showers■ Bathroom Floors ■ Service PorchesSpecial Features■ Easy To Use ■ Interior & Exterior Use ■ Weather Resistant■ Freeze/Thaw Resistant ■ Salt Water Resistant ■ Acid Resistant■ Non Yellowing ■ U.V. Transparent ■ Less Slippery

PRODUCT DE SCRIPTIONKEEP OUT OF REACH OF CHILDREN. Grout Sealer is designed for the pro-tection of all sanded, non-sanded and mortar joints. Grout Sealer pene-trates into the surface and forms an invisible barrier that is resistant tomoisture and stains, while allowing vapor to escape. Grout Sealer is not asurface coating and will not alter the natural look. Grout Sealer can be usedon interior and exterior applications. Grout Sealer is U.V. transparent andwill not yellow under any circumstances. NOTE: For any question concerning grout-refer to the manufacturers specifi-cations.Sample TestingDue to the differences of each material, several inconspicuous test patchesshould be completed to assure maximum performance. User must deter-mine suitability of the product for their intended use.Grout Color ModificationFor changing the color of sanded, epoxy and non-sanded grout joints usethe Grout Color Kit.Protect Neighboring SurfacesAlways protect neighboring surfaces including wood, carpet, metal, land-scaping and other non masonry surfaces.

NEW INSTALL ATIONS - APPLIC ATION INSTRUCTIONSRead entire label and PDS before using. Grout or mortar must be dry per manufacturers specification before apply-ing Grout Sealer. Apply Grout Sealer with it’s unique applicator tip directlyto the joint for maximum stain resistance. Any excess sealer that gets ontile or stone surface should be wiped off with a clean towel before it dries.Be careful not to allow sealer to puddle on surface.Existing Installation - Surface PreparationGrout or mortar surface must be dry and free of contaminants, includingpreviously applied sealers, dirt, lime & hard water deposits, efflorescence,rust & other heavy dirt and grime.Floor Coating/Wax RemovalTo remove existing coatings and/or waxes use Mira Strip or H2O Strip perthe instructions.Heavy Duty Cleaning: To remove lime and hard water deposits, efflores-cence, rust and other heavy dirt and grime use GCFR (Grout & ConcreteFilm Remover), Pre-Cast Concrete Cleaner or Porcelain Ceramic TileCleaner following the instructions carefully. If an additional non acid deepcleaning is necessary use Tile & Grout Cleaner or Liquid Poultice as direct-ed. All strippers and/or cleaners should be thoroughly rinsed with cleanwater and the materials allowed to dry.Light Duty Cleaning: Use Grout Cleaner, Mira Clean #1, Tile & GroutCleaner or Counter Kleen as directed.Anti-Slip/Increased Slip ResistanceFor quarry tile, ceramic tile and porcelain tile floors that require additionalslip properties to increase static coefficient of friction, use Mira Skidd asdirected.Mold, Mildew and Bacteria SanitationFor best results in killing mold, mildew, bacteria and other micro organisms,use Miracle Disinfectant as directed.Residue RemovalTo remove accumulated Grout Sealer residue, use Residue Remover asdirected.Existing Installation - Application Instructions:Follow the application instructions previously mentioned.

CoverageCoverage will vary depending on the density porosity, texture, surfaceabsorption, weather, time solution left on the surface and application meth-ods. Used as directed, Grout Sealer will cover approximately 60 - 115square feet per 6 oz. bottle (5 sq. meters per 14 milliliters).Cure TimeGrout Sealer will be dry to the touch in 1 - 3 hours and may be put into ser-vice. For optimum results the area should be kept dry and free from stainingmaterials for 72 hours.

MAINTENANCEFor ongoing maintenance instructions please refer to Miracle Sealants CareGuide. Refer to the Miracle Sealants Product Recommendation Chart forspecific product recommendations.StorageStore Grout Sealer in the original container, properly sealed to avoid conta-mination and solvent evaporation. Stored at 770 F (400 C), Grout Sealer willhave a shelf life of 12 months.Technical SupportFor additional technical support, contact Miracle Sealants Company at1-800-350-1901 or 626-443-6433 ext. 3013Office HoursMonday - Friday from 8:30 am - 5:00 pm PT.1-626-443-6433 or 1-800-350-1901 • Fax: 1-626-443-1435website: www.miraclesealants.comProduct Damaged During Transportation If product is damaged during transportation contact Info Trac @ 1-800-535-5053Additional ProductsMiracle Sealants Company offers a complete line of water & stain repellents, sealers, cleaner, polishing compounds, diamond abrasives,machinery and accessories for the tile, stone, concrete, metal, fabric andcarpet professional or do-it yourself specialist.WarrantyInstructions are a condensed guide and should not be considered com-plete. In the event of failure, the only obligation of Miracle SealantsCompany shall be to replace such products proven to be defective. Beforeusing, user shall determine the suitability of the product for their intendeduse. User assumes all risks and liability whatsoever in connection therein.Neither seller nor manufacturer shall be liable for any injury or inability touse this product.CautionGrout Sealer contains combustible petroleum distillates. All solvents mustbe considered toxic and must be used in a well ventilated area. Good venti-lation means that fresh air is flowing in such a way as to feel a slight breeze.Use open windows and use fans to circulate air. Continue to ventilate untilvapors are eliminated. Exposure to high vapor concentration must be avoid-ed. Inhaling the vapors can be harmful. Keep away from heat and openflames. Avoid prolonged contact with skin. Chemical resistant gloves shouldbe worn at all times. Keep small children and pets out of area until productor surface has thoroughly dried. Refer to the MSDS for additional informa-tion.


Grout Sealer

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: Name: Grout Sealer


Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS# OSHA PEL ACGIH TLV Weight %Petroleum Distillates 64741-65-7 100ppm 150ppm –VOC: 760 g/L

Section 3 - Physical/Chemical CharacteristicsBoiling point: 3200 F Specific Gravity: 0.760Vapor pressure: Not tested Melting Point: Not testedVapor density: Not tested Evaporation Rate: Not testedSolubility in water: InsolubleAppearance and odor: Colorless, solvent odor.

Section 4 - Fire and Explosion Hazard DataFlash Point: 1450 F Flammable Limits: Not TestedLEL: N/A UEL: N/APH: Neutral DOT#: N/ANFPA Hazard rating - H F R S And Larger (0-Least, 4-Extreme): 1 2 0 0Extinguishing media: CO2, dry foam, water fog

Special fire fighting procedures: Combustible, wear bunker gear and NIOSHapproved breathing apparatus.

Unusual fire and explosion hazards: Cool exposed containers with water toprevent rupturing. Heat will cause phosgene gas

Section 5 - Reactivity DataStability: StableConditions to avoid: NoneIncompatible materials to avoid: Heat, flames, strong oxidizers.Hazardous polymerization: None.Hazardous decomposition products: CO2

Section 6 - Health Hazard DataRoutes of Entry:Inhalation - PossibleSkin - PossibleIngestion - PossibleHealth Hazards - Same as signs and symptoms of exposure.OSHA Carcinogenicity - None; NTP - None; IARC Monographs - None

Signs and Symptoms of Over Exposure:Eyes: Burning irritation.Skin: Slight irritation and defatting of the skin -material will place a clearcoating onto skin.Ingestion: Toxic.Inhalation: Irritation, dizziness, headaches - high vapor concentration maycause central nervous system depression.

Medical conditions generally aggravated by exposure - same as signs andsymptoms of over exposure.

Emergency and First Aid Procedures:Eyes: Flush with water for fifteen minutes. If irritation persists, call a physician.Skin: Wash with soap and water. If irritation persists, call a physician.Ingestion: Do not induce vomiting. Call physician. Keep victim’s head belowhips to prevent aspiration.Inhalation: Get person to fresh air. If unconscious, call a physician.

Section 7 - Precautions For Safe Handling And UseSteps to be taken in case material is released or spilled: Soak up with inert, absorbent material. Scoop up and place in a proper waste disposal container.

Waste disposal method: Dispose of in accordance with state and local regulations.

Precautions to be taken in handling and storing: Store in a cool, dry place,out of direct sunlight. Do not freeze or heat above 1100 F.




Protective gloves: Rubber or plastic, chemical resistant.Eye protection: Tight fitting, splash proof safety goggles or glasses.Other protective clothing or equipment: Chemical resistant clothing.




DOT Hazard Class: OSHA Hazard Class:UN/NA Number:EPA Hazard Waste: D oo1, IgnitibleCPSC Classification: Combustible LiquidTransportation Class: 55





www.miraclesealants.comMira Shine

03_2

003

High Gloss Finish For■ Saltillo ■ Terra Cotta ■ Porous Unglazed Tile■ Other Concrete, Stone & Masonry Surfaces

Special Features■ Interior Use Only ■ Floors only ■ No Odor■ Scuff Resistant ■ Stain Resistant ■ VOC Compliant

PRODUCT DE SCRIPTION

KEEP OUT OF REACH OF CHILDREN. Mira Shine is a specially formulatedwater base coating designed to enhance the beauty and natural color ofsaltillo and terra cotta surfaces. Mira Shine enhances the look with a beau-tiful, high gloss finish.

The unique formula allows Mira Shine to work with hard to coat surfaces.Mira Shine exceeds minimum requirements for slip resistance. Mira Shineis easy to use, non-hazardous, V.O.C. compliant, extremely durable, and iseasy to clean up with water. Mira Shine can be spray buffed or high speedburnished to repair and rejuvenate.

Sample TestingDue to the differences of each material, several inconspicuous test patches should be completed to assure maximum performance. User must determine suitability of the product for their intended use.

Protect Neighboring SurfacesAlways protect neighboring surfaces including wood, carpet, metal, land-scaping and other non masonry surfaces.

Surface PreparationFor best results the surface should be clean, dry and free from frost anddust. Apply the appropriate Miracle Penetrating Sealer/Impregnator asdirected for each substrate. Allow the substrate to cure completely prior toapplying Mira Shine. This procedure assures maximum adherence and per-formance.

APPLIC ATION INSTRUCTIONS

Read entire label and PDS before using.

Mira Shine can be applied with a Mira Brush, Hand/Stand Applicator,pump sprayer, natural fiber brush or clean mop. Installation should be cleanand completely dry before using. When using a sprayer, apply as evenly aspossible. Follow the sprayer with a brush or applicator to even out MiraShine before it dries on the surface. Do not apply Mira Shine to a hot sur-face (800 F+). Best range (500 F - 800 F)

Multiple applications may be necessary to achieve desired results. Proceedwith subsequent applications after each has dried (Approximately 1 - 2hours). Be sure to even out the Mira Shine on the surface, blending in over-lap marks and eliminating all bubbles. Do not allow Mira Shine to puddleon the surface.

Cure TimeMira Shine will be dry to the touch in 1 - 5 hours and may be used for nor-mal foot traffic. For optimum results the area should be kept dry and freefrom staining materials for 72 hours.

MAINTENANCE

Regular maintenance will consist of using Mira Clean #1 or Saltillo & TerraCotta Liquid Wax on a daily, weekly or monthly basis as directed. Spraybuffing or high speed burnishing will repair and rejuvenate scuff marks andscratches that begin to develop in the finish. How often this procedure isnecessary will vary with the type of surface and the amount of foot traffic.For ongoing maintenance instructions please refer to Miracle Sealants CareGuide. Refer to the Miracle Sealants Product Recommendation Chart forspecific product recommendations.

Mold, Mildew and Bacteria SanitationFor best results in killing mold, mildew, bacteria and other micro organisms,use Miracle Disinfectant as directed.

Special NotesTo strip or remove Mira Shine use H2O Strip as directed. Allow new instal-lations to cure per the manufacturer’s specification before using MiraShine. Mira Shine is a topical coating, that will inhibit vapor transmissionand will scratch, scuff and mark under normal conditions.

CoverageCoverage will vary depending on the density, porosity, textures, surfaceabsorption, weather, time solution left on surface and application methods.Used as directed, Mira Shine coverage will vary from 400 - 2,000 squarefeet per gallon.

StorageStore Mira Shine in the original container upright, properly sealed andunmixed. Stored at 770 F (400 C), Mira Shine will have a shelf life of 12months. Do not allow to freeze.




Additional ProductsMiracle Sealants Company offers a complete line of water & stain repellents, sealers, cleaner, polishing compounds, diamond abrasives,machinery and accessories for the tile, stone, concrete, metal, fabric andcarpet professional or do-it yourself specialist.

CautionUse in a well ventilated area. Chemical resistant gloves should be worn atall times. Keep small children and pets out of area until product or surfacehas thoroughly dried. Refer to the MSDS for additional information.



Mira Shine

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: Name: Mira Shine


Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS# OSHA PEL ACGIH TLVDiethylene Glycol 111-77-3 – –Methyl EtherVOC: 52 g/L

Section 3 - Physical/Chemical CharacteristicsBoiling point: ≤2120 F Specific gravity: 1.04Vapor pressure: Not tested Melting point: Not testedVapor density: Not tested Evaporation rate: Not tested

Solubility in water: 100%Appearance and odor: Opaque white, polymer odor

Section 4 - Fire and Explosion Hazard DataFlash point: None Flammable limits: Not testedLEL: Not tested UEL: Not testedPH: 8.0 - 9.5 DOT#: None

NFPA hazard rating - H F R S (0-Least, 4-Extreme): 0 0 0 0HMIS hazard rating - H F R (0-Least, 4-Extreme): 0 0 0Extinguishing media: NoneSpecial fire fighting procedures: NoneUnusual fire and explosion hazards: None

Section 5 - Reactivity DataStability: StableConditions to avoid: NoneIncompatible materials to avoid: Strong oxidizers, cationic materialsHazardous decomposition or byproducts: CO, CO2Hazardous polymerization: None

Section 6 - Health Hazard DataRoutes of entry:Inhalation - PossibleSkin - PossibleIngestion - PossibleHealth hazards - Same as signs and symptoms of exposure.

OSHA carcinogenicity - None; NTP - none; IARC monographs - None

Note: All chemicals incorporated into this product are found on the TSCAinventory list.

Signs and Symptoms of Over Exposure:Eyes: Burning irritationSkin: Not expected to be a problemIngestion: NauseaInhalation: Not expected to be a problem

Medical conditions generally aggravated by exposure - Same as signs andsymptoms of over exposure.


Eyes: Flush with water for 15 minutes. If irritation persists, call a physician.

Skin: Wash off with water

Ingestion: Drink large amounts of water. Call physician.

Inhalation: Not expected to be a problem.

Section 7 - Precautions for Safe Handling and UseSteps to be taken in case material is released or spilled: Soak up with inert, absorbent material. Scoop up and place in a proper waste disposalcontainer.


Precautions to be taken in handling and storing: Store in a cool, dry place,out of direct sunlight. Do not freeze less than or equal to 320 F or heatabove 1100 F.




Protective gloves: Plastic or rubber, chemical resistant.Eye protection: Tight fitting, splash proof safety goggles.Other protective clothing or equipment: Chemical resistant clothing.






NOTE: Miracle Sealants believes the data set forth are accurate. MiracleSealants makes no warranty with respects thereto and disclaims all liability or reliance thereon. Such data are offered solely for consideration,investigation and verification. Also, the data set forth is for the concentratedfinished product. All lab samples are for experimental purposes only andused at the customers discretion.



www.miraclesealants.comMira MatteNatural Stone Color Enhancer

03_2

003

Color Enhancement For Textured Surfaces Including:■ Flamed Granite ■ Cleft Faced Slate■ Flamed Limestone ■ Tumbled Marble■ Textured Cast Stone ■ Textured Natural StoneSpecial Features■ Interior & Exterior ■ Easy To Use■ Water Resistant ■ Stain Resistant■ U. V. Transparent ■ Non yellowing

PRODUCT DE SCRIPTIONKEEP OUT OF REACH OF CHILDREN. Mira Matte is a unique productdesigned to enhance the natural color of all flamed, sandblasted, splitfaced, tumbled and textured surfaces. When used with one of our MiraclePenetrating Sealers, Mira Matte seals and protects while leaving a beauti-ful, low maintenance, color enhanced satin sheen. Mira Matte allows vaporto escape while offering a scuff and weather resistant surface. Mira Matteis U.V. transparent, will not yellow and can be used on both interior andexterior applications. Sample TestingDue to the differences of each material, several inconspicuous test patchesshould be completed to assure maximum performance. User must deter-mine suitability of the product for their intended use.Protect Neighboring SurfacesAlways protect neighboring surfaces including wood, carpet, metal, land-scaping and other non masonry surfaces.Polish EnhancementNot recommended.

NEW INSTALL ATIONS - APPLIC ATION INSTRUCTIONSRead entire label and PDS before using.Before Grouting: Apply Miracle Penetrating Sealer to all surfaces. This stepwill allow quick and easy cleanup after grouting. Grout can stain many sur-faces if this procedure is not used. Apply Miracle Penetrating Sealer usinga Mira Brush Applicator, Hand/Stand Applicator or a clean white towel.Apply enough to wet the surface. Be careful not to saturate the open groutjoints. Allow Miracle Penetrating Sealer to stand for approximately 1 - 5minutes for maximum penetration. Any excess sealer remaining at this timeshould be removed by wiping the surface with a clean dry towel. Typicallywe do not recommend a second application of sealer when utilizing MiraMatte. Allow Miracle Penetrating Sealer to dry 12 - 24 hours before contin-uing with the grouting procedure per manufacturers specification.After Grouting: Once grouted make sure that all grout residue is removedfrom the surface with a clean sponge and water. Allow grout joints to dry atleast 24 hours. If grout clean up is not performed effectively, additionalcleaning may be necessary to remove remaining grout residue or haze. Forthis procedure use GCFR (Grout, Concrete & Film Remover) (hydrochloricacid), Pre-Cast Concrete Cleaner, Sulfamic Acid Crystals or Epoxy GroutFilm Remover (phosphoric acid) as directed. Once the area has completelydried, proceed with the sealing of the grout for water and stain resistance.Apply Miracle Penetrating Sealer to all grout as directed. Allow sealer todry to the touch (1 - 2 hours). Apply Mira Matte to the entire surface using aMiracle Applicator or pump sprayer (exterior use only). If a pump sprayer isused, Mira Matte should be evened out with a brush before it dries. Worksmall areas 30 - 60 square feet (3 - 6 square meters) at a time. Do not allowMira Matte to puddle on the surface. Multiple applications may be neces-sary to achieve the desired results. Proceed with subsequent applicationsafter the previous application has dried to the touch (approximately 1 - 2hours). Be sure to even out Mira Matte on the surface, blending in overlapmarks.

Existing Installations - Surface PreparationsSurface must be dry and free of contaminant, including previously appliedsealers, dirt, lime & hard water deposits, efflorescence, rust & other heavydirt and grime.Surface Coating/Wax Removal: To remove existing coatings and/or waxes,use Mira Strip or H2O Strip per the instructions.Heavy Duty Cleaning: To remove lime, hard water deposits, efflorescence,rust and other heavy dirt and grime use GCFR or Pre-Cast Concrete Cleaneras directed. If an additional non acid deep cleaning is necessary use LiquidPoultice as directed. Light Cleaning: Use Mira Clean #1, Mira Soap or Counter Kleen as directed.Existing Installations - Application Instructions:Follow the application instructions previously mentioned, except now, sealthe grout joints at the same time as the rest of the tile or stone surface.When treating surface and grout at the same time, make sure all groutjoints are saturated with Miracle Penetrating Sealer. Once the sealer is dryto the touch (1 - 2 hours), proceed with the application of Mira Matte colorenhancer as previously mentioned. For added color where maximum stainrepellency is not required, use Mira Matte by itself.Special NoteOn smooth or honed surfaces, wipe excess Mira Matte from the surfacewithin 3 - 5 minutes. Do not let Mira Matte dry or become tacky beforeremoving excess. Mira Matte has a strong odor and should be used in wellventilated areas. Allow new installations to cure per the manufacturer’sspecification before using Mira Matte.Mold, Mildew and Bacteria SanitationFor best results in killing mold, mildew, bacteria and other micro organisms,use Miracle Disinfectant as directed.Cure TimeMira Matte will be dry to the touch in 2 - 4 hours and may be used for nor-mal foot traffic. For optimum results the area should be kept dry and freefrom staining materials for 72 hours.CoverageCoverage will vary depending on the density, porosity, texture, surfaceabsorption, weather, time solution left on surface and application methods.Used as directed, Mira Matte will cover approximately 200 - 800 squarefeet per gallon (20 - 80 square meters per 3.785 liters).

MAINTENANCEFor ongoing maintenance instructions please refer to Miracle Sealants CareGuide. Refer to the Miracle Sealants Product Recommendation Chart forspecific product recommendations.StorageStore Mira Matte in the original container, properly sealed to avoid contam-ination and solvent evaporation. Stored at 770 F (400 C), Mira Matte willhave a shelf life of 12 months. Do not allow to freeze.Technical SupportFor additional technical support, contact Miracle Sealants Company at1-800-350-1901 or 626-443-6433 ext. 3013Office HoursMonday - Friday from 8:30 am - 5:00 pm PT.1-626-443-6433 or 1-800-350-1901 • Fax: 1-626-443-1435website: www.miraclesealants.comProduct Damaged During TransportationIf product is damaged during transportation contact Info Trac @ 1-800-535-5053Additional ProductsMiracle Sealants Company offers a complete line of water & stain repellents, sealers, cleaner, polishing compounds, diamond abrasives,machinery and accessories for the tile, stone, concrete, metal, fabric andcarpet professional or do-it yourself specialist.


www.miraclesealants.comSaltillo & Terra Cotta Paste Wax

03_2

003

Color Enhancement For Porous Type Pavers Including■ Saltillo Tile ■ Terra Cotta Pavers ■ Cataluna Pavers■ Cantera/Adoquin ■ Unglazed Tile Pavers ■ Clay, Cast & Natural Pavers

Uses■ Kitchen ■ Dining & Patio Areas ■ Restrooms

Special Features■ Interior & Exterior ■ Easy to Use ■ Safe to Use■ Non-Yellowing ■ Scuff Resistant ■ Weather Resistant


KEEP OUT OF REACH OF CHILDREN. Saltillo & Terra Cotta Paste Wax &Saltillo Matte Finish are high quality blends of natural and synthetic waxes.This two part system was designed to recreate that “Old World” Europeanfinish or patina on porous type pavers. With continued use, these productsenrich and nourish the surface like fine leather. They have a low toxicity rat-ing and provide superior coverage making it a very cost effective system.

Sample TestingDue to the differences of each material, several inconspicuous test patchesshould be completed to assure maximum performance. User must deter-mine suitability of the product for their intended use.

Protect Neighboring SurfacesAlways protect neighboring surfaces including wood, carpet, metal, land-scaping and other surfaces.

NEW INSTALL ATIONS - APPLIC ATION INSTRUCTIONS


Before Grouting: Apply Saltillo & Terra Cotta Penetrating Sealer to all sur-faces prior to grouting. This step will allow quick and easy cleanup aftergrouting. Grout can stain many materials if this procedure is not used priorto the grouting process. Refer to product label and/or product data sheeton Saltillo & Terra Cotta Penetrating Sealer for further instructions.

After Grouting: Once grouted, make sure that all grout residue is removedfrom the surface with a clean sponge and water. Allow grout to dry at least24 hours. If grout clean up is not performed effectively, an additional clean-ing may be necessary to remove any remaining grout residue or haze. Forthis procedure use Heavy Duty Acid Cleaner following the label instructioncarefully. Once the area has completely dried, proceed with the sealing ofthe grout for water and stain resistance. Apply Saltillo & Terra CottaPenetrating Sealer to all grout with a thin paint brush. Allow sealer to dry atleast 2 hours before applying Saltillo & Terra Cotta Paste Wax. If the pastewax becomes stiff or hard, place the container in flame. Apply the pastewax using the enclosed applicator, Mira Brush Applicator or a clean towel.Apply the first coat in a very thin and even manner taking care to buff outany streaks or excess residue before they dry. If streaks dry, buff away bywiping area with a towel soaked in mineral spirits or acetone. Allow the ini-tial application to dry for 3 - 4 hours. A second application insures completeprotection and makes it possible to obtain the color desired. Make sure toeven out streaks when applying the second coat. Allow the second applica-tion to cure overnight. Once the paste wax has been successfully applied,proceed with the application of Saltillo & Terra Cotta Liquid Wax. Applyone application as directed for a final coat of protection and sheen.

Saltillo & Terra Cotta Liquid Wax is ready to use and requires no dilution.Apply Miracle Applicator using a flat brush, clean towel, lambs wool orother liquid wax type applicator. Allow to cure for 1 -2 hours. Once dry itmay be buffed for added luster with a white nylon pad by hand or theappropriate hand or floor machine.

Existing Installation - Surface PreparationSurface must be dry and free contaminant, including previously appliedsealers, dirt, lime & hard water deposits, efflorescence, rust & other heavydirt and grime.

Surface Coating/Wax RemovalTo remove existing solvent based floor coatings and/or waxes use Mira Strip fast acting floor stripper or the appropriate stripper per theinstructions.

Heavy Duty CleaningTo remove lime, hard water deposits, efflorescence, rust and other heavydirt and grime use Heavy Duty Acidic Cleaner following the label’s instruc-tions carefully. All stripper and/or cleaners should be thoroughly rinsedwith clean water and the materials allowed to dry.

Once surfaces have been properly prepared, proceed to the applicationinstructions previously mentioned.

Cure TimeSaltillo & Terra Cotta Paste Wax & Saltillo & Terra Cotta Liquid Wax will bedry to the touch in 1 - 2 hours and may be used for normal foot traffic. Foroptimum results the area should be kept dry and free from staining materi-als for 72 hours.

CoverageCoverage will vary depending on the density, porosity, texture, surfaceabsorption, weather, time solution left on surface and application methods.Used as directed, Saltillo & Terra Cotta Paste Wax & Saltillo & Terra CottaLiquid Wax will cover:

Paste Wax: 200 - 300 square feet per can (2-lbs) (18 - 27 square meters per0.0 kilogram)

Liquid Wax: 800 - 1200 square feet per gallon (72 - 108 square meters per3.785 liters)

MAINTENANCE

For ongoing maintenance instructions please refer to Miracle Sealants CareGuide. Refer to the Miracle Sealants Product Recommendation Chart forspecific product recommendations.

StorageStore Saltillo & Terra Cotta Paste Wax & Saltillo & Terra Cotta Liquid Waxin their original container, properly sealed to avoid contamination and evap-oration. Stored at 770 F (400 C), Paste Wax & Saltillo & Terra Cotta LiquidWax will have a shelf life of 12 months. Do not allow to freeze.






Saltillo & Terra Cotta Paste Wax

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: Name: Saltillo & Terra Cotta Paste WaxSection 1Manufacturers Name: Miracle Sealants CompanyAddress: 12318 Lower Azusa RoadEmergency Phone: 800-350-1901City: ArcadiaState: CADate Prepared: 04-01-2003Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS# OSHA PEL ACGIH TLVHydrocarbon Mixture 8002-05-9 500ppm 500Solvent Blend 64742-88-7 N/A N/AMineral Spirits 64742-95-6Wax Blend:Hydro-carbon Wax Mixture N/A –Synthetic Hydrocarbon N/A –Hydrocarbon N/A –Polyethylene Homopolymer 9002-88-4 –VOC: 356.06 g/LSection 3 - Physical/Chemical CharacteristicsBoiling point: 318-3880 F Specific gravity (H2O = 1): 0.797Vapor pressure: (Mm Hg)5.3 @ 1000 F Melting point: 2500 FVapor density (Air=1): 4.1 Evaporation rate (N-Butyl-Solubility in water: Insoluble Acetate=1): .13Appearance and odor: Brown, hydrocarbon odorSection 4 - Fire and Explosion Hazard DataFlash point: 1060 FFlammable limits / % Volume in air: Lower: 1 Upper: 7PH: N/A DOT#: N/ANFPA hazard rating - H F R S (0-Least, 4-Extreme): 1 1 0 0Extinguishing media: Use water fog, dry chemical or CO2. Do not use adirect stream of water.Special fire fighting procedures: Do not enter confined fire space withoutfull bunker gear, including a positive niosh approved self contained apparatus. Cool fire exposed containers with water.Unusual fire and explosion hazards: Containers exposed to intense heatfrom fires should be cooled with water to prevent vapor pressure buildupwhich could result in container rupture.Section 5 - Reactivity DataStability: StableHazardous depolimerization: Will not occurIncompatible materials to avoid: Heat, sparks, flame and contact withstrong oxidizing agents.Section 6 - Health Hazard DataRoutes of Entry:Eyes: PossibleInhalation - N/ASkin - PossibleIngestion - Possible

Signs and Symptoms of Over Exposure:Skin: Prolonged or repeated contact may result in defatting and drying ofthe skin.Ingestion: Ingestion of this product may result in vomiting; aspiration ofvomitus into lungs must be avoided as even small quantities may result inaspiration pneumonitis.Emergency and first aid procedures:Eyes: Flush the eyes with plenty of water for 15 minutes while holding eye-lids open. Call a physician.Skin: Wash with soap and water. If irritation persists, call a physician.Inhalation: N/A. Paste product.Ingestion: Do not induce vomiting. If vomiting occurs spontaneously, keephead below hips to prevent aspiration of liquid into the lungs. Call a physi-cian.Section 7 - Precautions For Safe Handling And UseSteps to be taken in case material is released or spilled: Eliminate potentialsources of ignition. Dike and contain. Soak up with residue with anabsorbent material such as clay sand or other suitable material.Waste disposal method: Dispose of in accordance with local, state and federal regulations.Handling and storage precautions: Handle as combustible liquid. Alwayswash hands thoroughly after handling these products.

Section 8 - Control MeasuresRespiratory protection: Ventilate by opening all doors and windows. If exposure above the TLV or PEL require a niosh approved respiratorequipped for the exposure or suitable respiratory protection per 29 CFR 1910.134 is required.Ventilation: Local exhaust.Protective gloves: Plastic or rubber, chemical resistant.Eye protection: Tight fitting, splash proof safety glasses.Other protective clothing or equipment: Chemical resistant clothing.Work hygienic practices: Wash hands thoroughly before handling foodstuffs, liquids or tobacco products. Use common sense and care aroundchemicals. Never mix this product with other chemicals. Consult your super-visor for all other hygienic and safety practices. All practices depend onyour specific business. Directions for use normally found on label which willdictate engineering and control measures.

Section 9 - Shipping & Regulatory ClassificationDOT Shipping Name: NA 1993 (5 gallon pails). Please refer to the Bill of


DOT Hazard Class: OSHA Hazard Class:UN/NA Number:EPA Hazard Waste:CPSC Classification:Transportation Class: 55Toxic Substances Control Act (TSCA): This product and/or all the ingredients contained in this product have been registered under the ToxicSubstances Control Act.NOTE: Miracle Sealants believes the data set forth are accurate. MiracleSealants makes no warranty with respects thereto and disclaims all liabilityor reliance thereon. Such data are offered solely for consideration, investi-gation and verification. Also, the data set forth is for the concentrated fin-ished product. All lab samples are for experimental purposes only and usedat the customers discretion.


CautionSaltillo & Terra Cotta Paste Wax contains petroleum distillate. All solventsmust be considered toxic and must be used in a well ventilated area. Goodventilation means that fresh air is flowing in such a way as to feel a slightbreeze. Use open windows and fans to circulate air. Continue to ventilateuntil vapors are eliminated. Exposure to high vapor concentration must beavoided. Inhaling the vapors can be harmful. Keep away from heat andopen flames. Avoid prolonged contact with skin. Chemical resistant glovesshould be worn at all times. Keep small children and pets out of the areauntil material has thoroughly dried. Refer to the MSDS for additional infor-mation.




www.miraclesealants.comSaltillo & Terra Cotta Liquid Wax

03_2

003

Color Enhancement For Porous Type Pavers Including■ Saltillo Tile ■ Terra Cotta Pavers ■ Cataluna Pavers■ Cantera/Adoquin ■ Unglazed Tile Pavers ■ Clay, Cast & Natural Pavers

Uses■ Kitchen ■ Dining & Patio Areas ■ Restrooms

Special Features■ Interior & Exterior ■ Easy to Use ■ Safe to Use■ Non-Yellowing ■ Scuff Resistant ■ Weather Resistant


KEEP OUT OF REACH OF CHILDREN. Saltillo & Terra Cotta Paste Wax &Saltillo Matte Finish are high quality blends of natural and synthetic waxes.This two part system was designed to recreate that “Old World” Europeanfinish or patina on porous type pavers. With continued use, these productsenrich and nourish the surface like fine leather. They have a low toxicity rat-ing and provide superior coverage making it a very cost effective system.



NEW INSTALL ATIONS - APPLIC ATION INSTRUCTIONS


Before Grouting: Apply Saltillo & Terra Cotta Penetrating Sealer to all sur-faces prior to grouting. This step will allow quick and easy cleanup aftergrouting. Grout can stain many materials if this procedure is not used priorto the grouting process. Refer to product label and/or product data sheeton Saltillo & Terra Cotta Penetrating Sealer for further instructions.

After Grouting: Once grouted, make sure that all grout residue is removedfrom the surface with a clean sponge and water. Allow grout to dry at least24 hours. If grout clean up is not performed effectively, an additional clean-ing may be necessary to remove any remaining grout residue or haze. Forthis procedure use Heavy Duty Acid Cleaner following the label instructioncarefully. Once the area has completely dried, proceed with the sealing ofthe grout for water and stain resistance. Apply Saltillo & Terra CottaPenetrating Sealer to all grout with a thin paint brush. Allow sealer to dry atleast 2 hours before applying Saltillo & Terra Cotta Paste Wax. If the pastewax becomes stiff or hard, place the container in flame. Apply the pastewax using the enclosed applicator, Mira Brush Applicator or a clean towel.Apply the first coat in a very thin and even manner taking care to buff outany streaks or excess residue before they dry. If streaks dry, buff away bywiping area with a towel soaked in mineral spirits or acetone. Allow the ini-tial application to dry for 3 - 4 hours. A second application insures completeprotection and makes it possible to obtain the color desired. Make sure toeven out streaks when applying the second coat. Allow the second applica-tion to cure overnight. Once the paste wax has been successfully applied,proceed with the application of Saltillo & Terra Cotta Liquid Wax. Applyone application as directed for a final coat of protection and sheen.

Saltillo & Terra Cotta Liquid Wax is ready to use and requires no dilution.Apply Miracle Applicator using a flat brush, clean towel, lambs wool orother liquid wax type applicator. Allow to cure for 1 -2 hours. Once dry itmay be buffed for added luster with a white nylon pad by hand or theappropriate hand or floor machine.

Existing Installation - Surface PreparationSurface must be dry and free contaminant, including previously appliedsealers, dirt, lime & hard water deposits, efflorescence, rust & other heavydirt and grime.

Surface Coating/Wax RemovalTo remove existing solvent based floor coatings and/or waxes use Mira Strip fast acting floor stripper or the appropriate stripper per theinstructions.

Heavy Duty CleaningTo remove lime, hard water deposits, efflorescence, rust and other heavydirt and grime use Heavy Duty Acidic Cleaner following the label’s instruc-tions carefully. All stripper and/or cleaners should be thoroughly rinsedwith clean water and the materials allowed to dry.

Once surfaces have been properly prepared, proceed to the applicationinstructions previously mentioned.

Cure TimeSaltillo & Terra Cotta Paste Wax & Saltillo & Terra Cotta Liquid Wax will bedry to the touch in 1 - 2 hours and may be used for normal foot traffic. Foroptimum results the area should be kept dry and free from staining materi-als for 72 hours.

CoverageCoverage will vary depending on the density, porosity, texture, surfaceabsorption, weather, time solution left on surface and application methods.Used as directed, Saltillo & Terra Cotta Paste Wax & Saltillo & Terra CottaLiquid Wax will cover:

Paste Wax: 200 - 300 square feet per can (2-lbs) (18 - 27 square meters per0.0 kilogram)

Liquid Wax: 800 - 1200 square feet per gallon (72 - 108 square meters per3.785 liters)

MAINTENANCE


StorageStore Saltillo & Terra Cotta Paste Wax & Saltillo & Terra Cotta Liquid Waxin their original container, properly sealed to avoid contamination and evap-oration. Stored at 770 F (400 C), Paste Wax & Saltillo & Terra Cotta LiquidWax will have a shelf life of 12 months. Do not allow to freeze.






Saltillo & Terra Cotta Liquid Wax

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: Name: Saltillo & Terra Cotta Liquid WaxSection 1Manufacturers Name: Miracle Sealants CompanyAddress: 12318 Lower Azusa RoadEmergency Phone: 800-350-1901City: ArcadiaState: CADate Prepared: 04-01-2003Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS# OSHA PEL ACGIH TLVPolydimethylsiloxaneEmulsion 63148-62-9/7732-18-5C10-C15 Paraffins-Cyclo-Paraffins 64742-478-8 N/E N/EVOC = N/ASection 3 - Physical/Chemical CharacteristicsBoiling point: 310-4050 F Specific gravity (H2O = 1): 0.78Vapor pressure: (Mm Hg) 5.3 @ 1000 F Melting point: N/AVapor density (Air=1): 4.1 Evaporation rate (N-Butyl)Solubility in water: Neg Acetate = 1) : 0.13Appearance and odor: Hydrocarbon odorSection 4 - Fire And Explosion Hazard DataFlash Point: 2000 F Flammable Limits: N/ALEL: 1 UEL: 7PH: N/A DOT#: N/ANFPA Hazard Rating - H F R S (0-Least, 4-Extreme): 1 1 0 0Extinguishing media: Use water fog, dry chemical or CO2. Do not use adirect stream of water.Special fire fighting procedures: Do not enter confined fire space withoutfull bunker gear, including a positive NIOSH approved self contained appa-ratus. Cool fire exposed containers with water.Unusual fire and explosion hazards: Containers exposed to intense heatfrom fires should be cooled with water to prevent vapor pressure buildupwhich could result in container rupture.Section 5 - Reactivity DataStability: StableHazardous depolimerization: Will not occur.Conditions to avoid: Heat, flame, sparks and contact with strong oxidizingagents.Section 6 - Health Hazard DataRoutes of entry:Inhalation - PossibleSkin - PossibleIngestion - PossibleEyes - Possible

Signs and Symptoms of Over ExposureSkin: Liquid is mildly irritating to the skin. Prolonged or repeated liquid con-tact can result in defatting and drying of the skin which may result in skinirritation and dermatitis.Ingestion: Ingestion of product may result in vomiting; aspiration of vomi-tus into the lungs must be avoided as even small quantities may result inaspiration pheumonities.Eyes: Liquid is mildly irritating to the eyes. High vapor concentrate maycause irritation.Inhalation: N/AEmergency and First Aid ProceduresEyes: Flush the eyes with plenty of water for 15 minutes while holding eye-lids open. Call a physician if irritation persists.Skin: Wash with soap and water. If irritation persists, call a physician.Inhalation: N/A. Ingestion: Do not induce vomiting. If vomiting occurs spontaneously, keephead below hips to prevent aspiration of liquid into the lungs. Call a physi-cian.Section 7 - Precautions For Safe Handling And UseSteps to be taken in case material is released or spilled: Dike and contain. Waste disposal method: Dispose of in accordance with local, state and fed-eral regulations. Handling and storage precautions: Keep liquid and vapor away from heat,sparks and flame.Section 8 - Control MeasuresRespiratory Protection: None required.Ventilation: Local exhaust.Protective gloves: Plastic or rubber, chemical resistant.Eye protection: Tight fitting, splash proof safety glasses.Other protective clothing or equipment: Chemical resistant clothing.Work hygienic practices: Wash hands thoroughly before handling foodstuffs, liquids or tobacco products. Use common sense and care aroundchemicals. Never mix this product with other chemicals. Consult your super-visor for all other hygienic and safety practices. All practices depend onyour specific business. Directions for use normally found on label which willdictate engineering and control measures.Section 9 - Shipping and Regulatory classificationDOT Shipping Name: Please refer to the Bill of Lading receiving/documents


DOT Hazard Class: OSHA Hazard Class:UN/NA Number:EPA Hazard Waste:CPSC Classification:Transportation Class: 55Toxic Substances Control Act (TSCA): This product and/or all the ingredi-ents contained in this product have been registered under the ToxicSubstances Control Act.NOTE: Miracle Sealants believes the data set forth are accurate. MiracleSealants makes no warranty with respects thereto and disclaims all liabilityor reliance thereon. Such data are offered solely for consideration, investi-gation and verification. Also, the data set forth is for the concentrated fin-ished product. All lab samples are for experimental purposes only and usedat the customers discretion.



CautionSaltillo & Terra Cotta Liquid Wax. Store in cool area. Only use this productin well ventilated areas. Good ventilation means that fresh air is flowing insuch a way to feel a slight breeze. Continue to ventilate until odors are com-pletely eliminated. Avoid contact with skin. Chemical resistant glovesshould be worn at all times. Keep small children and pets out of area untilproduct or surface has thoroughly dried. Refer to the MSDS for additionalinformation.



Mira MatteNatural Stone Color Enhancer

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: 6477 Name: Mira MatteSection 1Manufacturers Name: Miracle Sealants CompanyAddress: 12318 Lower Azusa Rd.Emergency Phone: 800-350-1901City: ArcadiaState: CADate Prepared: 04-01-2003Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS # OSHA PEL ACGIH TLVAromatic Petroleum Distillates 64742-95-6 100ppm 100ppm2-Butoxy Ethanol 111762 25ppm 25ppmVOC Content: 800 g/LSection 3 - Physical/Chemical CharacteristicsBoiling point: 2120F Specific gravity: 0.905Vapor pressure: Not tested Melting point: Not testedVapor density: Not tested Evaporation rate: Not testedSolubility in water: InsolubleAppearance and odor: Light color liquid with aromatic hydrocarbon odor.Section 4 - Fire And Explosion Hazard DataFlash point: 1200F Flammable limits: Not testedLEL: 1 UEL: 7PH: N/A DOT#: UN 1255 (Combustible liquid)NFPA hazard rating - H F R S (0-Least, 4-Extreme): 2 2 0 0Extinguishing media: Regular foam carbon dioxide, or dry foam.Special fire fighting procedures: Combustible - wear full bunker gear andNIOSH approved breathing apparatusUnusual fire and explosion hazards: Vapors are heavier than air and maytravel along the ground and ignited by heat, pilot lights, other flames andignition sources at locations distant from material handling point. Never usewelding or cutting torch on drum, it can ignite explosively.Section 5 - Reactivity DataStability: StableConditions to avoid: Heat, flame and contact with strong oxidizing agents.Incompatible materials to avoid: Strong oxidizers.Hazardous decomposition or byproducts: CO, CO2, Unidentified organiccompound.Hazardous polymerization: Will not occur.Section 6 - Health Hazard DataRoutes of Entry:Inhalation - PossibleSkin - PossibleIngestion - PossibleHealth Hazards - Same as signs and symptoms of exposure.OSHA Carcinogenicity - No NTP - No IARC Monographs - NoNote: All chemicals incorporated into this product are found on the TSCAinventory list.Signs and Symptoms Of Over Exposure:Eyes - Burning irritation.Skin - Prolong or repeated contact can cause moderate irritation, defattingand dermatitis.Ingestion: Can cause gastrointestinal irritation, nausea, vomiting and diar-rhea. Aspiration of material into the lungs can cause chemical pneumonitiswhich can be fatal.

Inhalation: Excessive inhalation of vapors can cause nasal and respiratoryirritation, central nervous system effects including dizziness,weakness,fatigue, nausea, headache and possible unconsciousness, and even death.Medical conditions generally aggravated by exposure: same as signs andsymptoms of over exposure.Emergency and First Aid Procedures:Eyes: Flush with water for 15 minutes. If irritation persists, call physician.Skin: Thoroughly wash exposed area with soap and water. Remove conta-minated clothing. Launder contaminated clothing before re-use.Ingestion: Do not induce vomiting, keep person warm, quiet and get med-ical attention. Aspiration of material into the lungs due to vomiting cancause chemical pneumonitis which can be fatal.Inhalation: If affected, removed individual to fresh air. If breathing hasstopped give artificial respiration. Keep person warm, quiet and get medicalattention immediately.Section 7 - Precautions For safe Handling And UseSteps to be taken in case material is released or spilled: Soak up with inert, absorbent material. Scoop up and place in a proper waste disposalcontainer.Waste disposal method: Dispose of in accordance with federal, state, andlocal regulations.Precautions to be taken in handling and storing: Store in a cool, dry place,out of direct sunlight. Do not freeze equal to or less than 320 F, or heatabove 1100F.Other precautions: KEEP OUT OF REACH OF CHILDREN. Follow directions onthe container for proper use of this product.Section 8 - Control MeasuresRespiratory protection: Ventilate by opening all doors and windows. If exposure above the TLV or PEL require a niosh approved respiratorequipped for the exposure or suitable respiratory protection per 29 CFR 1910.134 is required.Ventilation:Local exhaust - If available Special - NoneMechanical - If available Other - NoneProtective gloves: Rubber, plastic - solvent resistant.Eye protection: Tight fitting, splash proof safety glasses or goggles.Other protective clothing or equipment: Chemical resistant clothing.Work hygienic practices: Wash hands thoroughly before handling foodstuffs, liquids or tobacco products. Use common sense and care aroundchemicals. Never mix this product with other chemicals. Consult your super-visor for all other hygienic and safety practices. All practices depend onyour specific business. Directions for use normally found on label which willdictate engineering and control measures.Section 9 - Shipping & Regulatory ClassificationDOT Shipping Name: Please refer to the Bill of Lading receiving/documents

for up-to-date information.DOT Hazard Class:OSHA Hazard Class:UN/NA Number:EPA Hazard Waste:CPSC Classification:Transportation Class: 55Toxic Substances Control Act (TSCA): This product and/or all the ingredi-ents contained in this product have been registered under the ToxicSubstances Control Act.NOTE: Miracle Sealants believes the data set forth are accurate. MiracleSealants makes no warranty with respects thereto and disclaims all liabilityor reliance thereon. Such data are offered solely for consideration, investi-gation and verification. Also, the data set forth is for the concentrated fin-ished product. All lab samples are for experimental purposes only and usedat the customers discretion.


CautionMira Matte contains petroleum distillates. All solvents must be consideredtoxic and must be used in a well ventilated area. Good ventilation meansthat fresh air is flowing in such a way as to feel a slight breeze. Open win-dows and use fans to circulate air. Continue to ventilate until vapors areeliminated. Exposure to high vapor concentration must be avoided. Inhalingthe vapors can be harmful. Keep away from heat and open flames. Avoidprolonged contact with skin. Chemical resistant gloves should be worn atall times. Keep small children and pets out of area until product or surfaceshas thoroughly dried. Refer to the MSDS for additional information.




www.miraclesealants.comMarble Conditioner

03_2

003

To Polish & Increase Slip Resistance For■ Marble ■ Terrazzo ■ Agglomerate■ Travertine ■ Other Natural Stone

Uses■ Floors ■ Counters ■ Walls■ Stairs ■ Ramps ■ Showers

Special Features■ Removes Acid Etching ■ Increases Polish ■ Increases Slip Resistance■ Easy To Use ■ Inexpensive ■ Fast


KEEP OUT OF REACH OF CHILDREN. Marble Conditioner is a chemicalrecrystallization treatment for use with marble, terrazzo, agglomerate,travertine and some granite. When used as part of a stone care program itwill enhance the polished finish and make the surface harder and less slip-pery. Marble Conditioner is very effective as an ongoing maintenance pro-cedure to maintain polish and slip resistance in high traffic areas.

Sample TestingDue to the differences of each substrate, several inconspicuous test patch-es should be completed to assure maximum performance. User mustdetermine suitability of the product for their intended use.

Protect Neighboring SurfacesAlways protect neighboring surfaces including wood, carpet, metal, land-scaping and other masonry and non masonry surfaces.



For the best performance and protection Miracle Penetrating Sealer/Impregnator should be used as directed on all surfaces and grout beforeusing Marble Conditioner or any other recrystallization formula. This willhelp resist darkening of light colored surfaces or grout lines. MiraclePenetrating Sealer/Impregnator will also provide water, stain and slipresistance.

Make sure the surface is completely dry before using.

Shake Marble Conditioner thoroughly and pour into a plastic trigger spraybottle. Once in spray bottle, shake contents frequently throughout opera-tion. Spray lightly onto the surface being treated immediately buffing areawith a Marble Master MM1000 (175 rpm/150lbs.) floor machine equippedwith a #0, #1 or #2 steel wool pad. Work areas approximately 3' x 3' in size.Apply 2 -3 squirts to the surface, working area in a side to side motion untildry. Once one side of the steel wool pad becomes dirty, turn it over and usethe other side. When several sections are completed the overall area shouldbe buffed one last time with a clean dry steel wool pad. This will removeany swirl marks that might be present. Make sure that the steel wool pads,are clean and dry. All steel wool shavings should be removed with a drydust mop once the area has been completed. Check the finish in day lightconditions for your final evaluation. Use Marble Conditioner as often astraffic dictates, monthly, quarterly, annually. In heavily damaged areas, hon-ing the surface with abrasives may be necessary prior to the use of MarbleConditioner in order to achieve desired results.

Special Note: It is also recommended that surfaces be honed with abra-sives periodically in order to break the surface crystals that build on the sur-face with prolonged use. This is important in allowing the proper vaportransmission necessary to natural stone surfaces.

Heavy Duty Cleaning: For a non-acid deep clean, use Liquid Poultice asdirected.

Light Duty Cleaning: Use Mira Clean #1, Stone Cleaner Preserver, CounterKleen or Mira Soap as directed.


CoverageCoverage will vary depending on density, porosity, texture, surface absorp-tion, weather, time solution left on surface and application methods. Usedas directed, Marble Conditioner will cover approximately 1000 - 5000square feet per gallon (90 - 455 square meters per 3.785 liters) dependingon the surface.

MAINTENANCE


StorageStore Marble Conditioner in the original container, properly sealed to avoidcontamination and evaporation. Stored at 770 F (400 C), Marble Conditionerwill have a shelf life of 12 months. Do not allow to freeze.




Additional ProductsMiracle Sealants Company offers a complete line of water & stain repel-lents, sealers, cleaner, polishing compounds, diamond abrasives, machin-ery and accessories for the tile, stone, concrete, metal, fabric and carpetprofessional or do-it yourself specialist.


CautionMarble Conditioner contains silica fluorides. Open windows and use fansto circulate air. Good ventilation means that fresh air is flowing in such away to feel a slight breeze. Avoid prolonged contact with skin. Chemicalresistant gloves should be worn at all times. Keep small children and petsout of area until product or surface has thoroughly dried. Refer to the MSDSfor additional information.


Marble Conditioner

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: Name: Marble Conditioner

Section 1Manufacturers Name: Miracle Sealants CompanyAddress: 12318 Lower Azusa RoadEmergency Phone: 800-350-1901City: ArcadiaState: CADate Prepared: 04-01-2003

Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS # OSHA PEL ACGIH TLVMagnesium HexaFluorosilicate 1694-96-58 2.5mg/M3 2.5mg/MFluosilic Acid 1696-18-34 2.5mg/M3 2.5mg/MVOC: < 10 g/L

Section 3 - Physical/Chemical CharacteristicsBoiling point: 2120 F Specific gravity: 1.1Vapor pressure: Not tested Melting point: Not testedVapor density: Not tested Evaporation rate: Not testedSolubility in water: Miscible

Appearance and Odor: Opaque Cream, Acrid Odor

Section 4 - Fire and Explosion Hazard DataFlash point: None Flammable limits: Not testedLEL: Not tested UEL: Not testedPH: 0.5-2.0 DOT#: UN 2856

NFPA hazard rating - H F R S (0-Least, 4-Extreme): 3 0 0 0HMIS hazard rating - H F R (0-Least, 4-Extreme): 3 0 0Extinguishing media: NoneSpecial fire fighting procedures: NoneUnusual fire and explosion hazards: None

Section 5 - Reactivity DataStability: StableConditions to avoid: Acid sensitive surfacesIncompatible materials to avoid: Strong oxidizers, ammoniaHazardous decomposition byproducts: CO, CO2Hazardous polymerization: None

Section 6 - Health Hazard DataRoutes of Entry:Inhalation - PossibleSkin - PossibleIngestion - Possible

Health hazards - Same as signs and symptoms of exposure.OSHA Carcinogenicity - None; NTP - None; IARC Monographs - NoneNote: All chemicals incorporated into this product are found on the TSCAinventory list.

Signs and Symptoms of Over Exposure:Eyes: Burning irritationSkin: Burning irritationIngestion: Toxic, irritationInhalation: Irritation, dizziness, headaches.Medical conditions generally aggravated by exposure: Same as signs andsymptoms of exposure.

Emergency and First Aid Procedures:Eyes: Flush with water for 15 minutes. If irritation persists, call physician.Skin: Wash with soap and water. If irritation persists, call physician.Ingestion: Drink large amounts of water followed by milk of magnesia. Call physician.Inhalation: Get person to fresh air. If unconscious, call a physician.






Ventilation:Local exhaust - If available Special - NoneMechanical - If available Other - None



Section 9 - Shipping & Regulatory ClassificationDOT Shipping Name: Fluorosilicate, N.O.S. 6.1, UN 2856, PGIII, (Contains

magnesium Fluorosilicate) Requires Keep Away FromFood Placard. Please refer to the Bill of Lading receiv-ing/documents for up-to-date information.

DOT Hazard Class: 8 CorrosiveOSHA Hazard Class: CorrosiveUN/NA Number: UN 2856EPA Hazard Waste:CPSC Classification:Transportation Class: 55





www.miraclesealants.comStone Polish

03_2

003

Natural Stone Polish ForCounter Tops, Fireplaces, Vanities, Walls & Furniture

Special Features■ Easy to Use ■ High Shine ■ Inexpensive


KEEP OUT OF REACH OF CHILDREN. Stone Polish nourishes and enrichesthe natural beauty and polish of marble, granite, agglomerate, terrazzo andstone counter tops, vanities, fireplaces, furniture and walls. Stone Polish isnot recommended for floors. Stone Polish will hide light scratches and etchmarks while leaving a beautiful protective shine. Stone Polish is easy touse and requires no machinery to apply or remove.





Shake well before using. Apply Stone Polish liberally with a Mira Brush,Hand/Stand Applicator or a clean soft cloth. Allow to dry to a haze beforebuffing off with a clean dry cloth or #1, #0 or #00 steel wool pad by hand.For larger areas a hand machine may also be used. NOT FOR USE ONFLOORS.

Heavy Duty Cleaning: For a non-acid deep clean, use Liquid Poultice asdirected.

Light Duty Cleaning: Use Mira Clean #1 or Counter Kleen as directed.


Residue RemovalTo remove accumulated Stone Polish residue, use Miracle ResidueRemover as directed.

Cure TimeAllow Stone Polish to cure 3 - 72 hours before using surface for food contact.

Water, Stain & Slip ProtectionTo protect cleaned area from future soiling and staining and increase staticcoefficient of friction, we recommend applying the appropriate MiraclePenetrating Sealer/ Impregnator.

CoverageCoverage will vary depending on density, porosity, texture, surface absorp-tion, weather, time solution left on surface and application methods. Usedas directed, Stone Polish will cover up to 3,000 square feet per gallon (270square meters per 3.785 liters)

MAINTENANCE


Special NotesTo remove scratches and etch marks, try Water Ring & Etch Remover.

StorageStore Stone Polish in the original container, properly sealed and unmixed.Stored at 770 F (400 C), Stone Polish will have a shelf life of 12 months. Donot allow to freeze.






CautionStone Polish contains combustible petroleum distillate. All solvents mustbe considered toxic and must be used in a well ventilated area. Good venti-lation means that fresh air is flowing in such a way as to feel a slight breeze.Use open windows and fans to circulate air. Continue to ventilate untilvapors are eliminated. Exposure to high vapor concentration must be avoid-ed. Inhaling the vapors can be harmful. Keep away from heat and openflames. Avoid prolonged contact with skin. Chemical resistant gloves shouldbe worn at all times. Keep small children and pets out of area until materialhas thoroughly dried. Refer to the MSDS for additional information.


Stone Polish

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: Name: Stone PolishSection 1Manufacturers Name: Miracle Sealants CompanyAddress: 12318 Lower Azusa RoadEmergency Phone: 800-350-1901City: ArcadiaState: CAPhone: 626-443-6433Date Prepared: 04-01-2003Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS # OSHA PEL ACGIH TLVAliphatic Hydrocarbons 8052-4-3 100 ppm 100 ppmVOC Content: 679 g/LSection 3 - Physical/Chemical CharacteristicsBoiling point: 360 - 5100 F Specific gravity: 0.77Vapor pressure (Mm Hg): 2 Melting point: N/AVapor density (Air=I): 4.9 Evaporation rate: 0.12Weight per gallon: 6.4 Lbs Solubility in water: InsolubleAppearance and odor: Cloudy white liquid - Solvent odor.Section 4 - Fire And Explosion Hazard DataFlash Point: 1050 F ( TCC ) Flammable limits: Lower-1.0/Upper-6.0Autoignition temp: 4900 FNFPA Hazard Rating - H F R S (0-Least, 4-Extreme): 1 2 0 0Extinguishing media: Foam, carbon dioxide, dry chemical.Special fire fighting procedures: Use self contained breathing apparatus.Pressure demands MSHA/NIOSH approved (or equivalent) and full protec-tive gear. Cool fire exposed areas & equipment.Unusual fire and explosion hazards: Do not use direct stream of water,material may float and reignite. Vapor fumes can catch fire and ignite.Section 5 - Reactivity DataStability: Stable.Conditions to avoid: Sparks or open flames, or severe heat.Incompatible materials to avoid: Strong oxidizers & reducing agents.Hazardous decomposition: Thermal decomposition products might includecarbon monoxide and carbon dioxide.Hazardous polymerization: Will not occurSection 6 - Health Hazard DataRoutes of Entry:Inhalation - PossibleSkin - PossibleIngestion - PossibleEyes - PossibleHealth Hazards - Same as signs and symptoms of overexposure.OSHA Carcinogenicity - No; NTP - No; IARC Monographs - NoSigns and Symptoms of Overexposure:Skin: May cause skin irritation on prolonged or repeated contact.Eyes: Mildly irritating.Ingestion: Harmful if swallowed.Inhalation: The recommended exposure standard is 125ppm.Medical conditions generally aggravated by exposure: None known.Chronic effects of over exposure: Prolonged exposure to high concentra-tions may cause symptoms of central nervous systemDepression such as headache, dizziness, loss of coordination. Affected per-sons normally experience complete recovery when removed from exposurearea.Emergency and First Aid ProceduresIngestion: If swallowed, contact a physician or poison control center imme-diately. Do not induce vomiting unless directed by physician.Skin: Remove contaminated clothing and wash affected areas of skin withsoap and water. Contact a physician if irritation persists.Inhalation: Remove affected person to fresh air. Apply artificial respiration ifindicated.Eyes: Flush with plenty of water. Contact a physician if irritation persists.Section 7 - Precautions for Safe Handling and Use

Steps to be taken in case material is released or spilled: Eliminate all openflame in vicinity of spill or released vapor. Stop the source of leak or release.Clean up release as soon as possible observing. Precautions listed under special protective information. Contain liquid toprevent further contamination of soil, surface water or ground water. Cleanup small spills using appropriate techniques such as sawdust, earth, etc.Waste disposal method: Place contaminated materials in disposable con-tainers and dispose of in a manner consistent with applicable regulations.Contact local environment or health authorities for approved disposal ofthis material.Precautions to be taken in handling and storing: storing upright at roomtemperature. Avoid exposure to extreme temperatures. Do not use or storenear flame, sparks, or hot surfaces. Use only in well ventilated areas.Containers smaller than one gallon: Store in original container in a cool dryplace inaccessible to children and petsKeep container closed when not in use. Emptied container still containshazardous or explosive vapor or liquid.

Section 8 - Control MeasuresRespiratory protection: Ventilate by opening all doors and windows. If exposure above the TLV or PEL require a niosh approved respiratorequipped for the exposure or suitable respiratory protection per 29 CFR 1910.134 is required.Ventilation:Local exhaust - Okay Special - NoneOther - None Mechanical - Yes, when in enclosed spacesProtective gloves: Plastic or rubber, chemical resistant.Eye protection: Tight fitting splash proof safety glasses.Other protective clothing or equipment: As necessary to protect againstprolonged or repeated contact.Work hygienic practices: Wash hands thoroughly before handling foodstuffs, liquids or tobacco products. Use common sense and care aroundchemicals. Never mix this product with other chemicals. Consult your super-visor for all other hygienic and safety practices. All practices depend onyour specific business. Directions for use normally found on label which willdictate engineering and control measures.

Section 9 - Shipping & Regulatory ClassificationDOT Shipping Name: Coating Solution, Liquid. Please refer to the Bill of


DOT Hazard Class: OSHA Hazard Class: FlammableUN/NA Number: NoneEPA Hazard Waste:CPSC Classification:Transportation Class: 55Toxic Substances Control Act (TSCA): This product and/or all the ingredi-ents contained in this product have been registered under the ToxicSubstances Control Act.NOTE: Miracle Sealants believes the data set forth are accurate. MiracleSealants makes no warranty with respects thereto and disclaims all liability or reliance thereon. Such data are offered solely for consideration,investigation and verification. Also, the data set forth is for the concentratedfinished product. All lab samples are for experimental purposes only andused at the customers discretion.



www.miraclesealants.comStone Polish Preserver

03_2

003

Stone Polish Preserver For■ Marble ■ Granite ■ Limestone■ Terrazzo ■ Travertine ■ All Natural Stone

Special Features■ No Rinse ■ Easy to Use ■ Protect the Polish■ Water Base ■ Environmentally Friendly ■ Breathable■ Concentrated ■ Inexpensive ■ Interior Only■ Buffable


KEEP OUT OF REACH OF CHILDREN. Stone Polish Preserver is abiodegradable, water base formula designed for the protection of the natur-al finish on polished and honed stone surfaces. Stone Polish Preserver willprotect the surface of the stone from foot traffic, scratches and wear associ-ated with daily use. Stone Polish Preserver leaves a beautiful, NO RINSEsacrificial finish that will not scuff or yellow. Stone Polish Preserver is vaporpermeable and resists streaking.



Existing Installation - Surface PreparationSurface must be dry and free of contaminant, including previously appliedsealers & waxes, lime, hard water deposits, efflorescence, rust and othervery heavy grime. To remove existing sealers and waxes use Mira Strip orH2O Strip per specification.

Water, Stain & Slip ProtectionTo protect cleaned area from future soiling and staining and increase staticcoefficient of friction, we recommend applying the appropriate MiraclePenetrating Sealer/Impregnator before the first application of StonePolish Preserver.



Always dry dust mop or sweep the surface to be cleaned before applyingStone Polish Preserver. Mix 3 - 6 ounces of Stone Polish Preserver to 1 gal-lon of clean water. Use a clean mop. Working in small sections (25 - 50square feet) mop the surface evenly. Rinse mop in the solution, wring andapply to adjoining surface in a cross pattern (north-south/east-west). Whenthe solution becomes dirty or cloudy, replace it. Completely cover all sur-face area but DO NOT RE-MOP OR RINSE as it will remove the protectivefilm. Once the Stone Polish Preserver has dried (1 - 2 hours) it may bebuffed with a soft brush or white pad using a 175 rpm - 2,000 rpm floormachine.

Alternate Stone Polish Preserver with Stone Cleaner Preserver every otherday.

Polish EnhancementPeriodically use Mira Dust, Marble Conditioner, Mira Brite, Mira Pad orGranite Brite as directed.

CoverageCoverage will vary depending on density, porosity, texture, surface absorp-tion, weather, time solution left on surface and application methods. Usedas directed, Stone Polish Preserver will clean approximately 10,000 -20,000 square feet per gallon (900 - 1800 square meters per 3.785 litters).

MAINTENANCE

Periodically buff surface with Mira Dust, Marble Conditioner, Mira Brite,Granite Brite or Mira Pad as directed. For ongoing maintenance instruc-tions please refer to Miracle Sealants Care Guide. Refer to the MiracleSealants Product Recommendation Chart for specific product recommen-dations.

StorageStore Stone Polish Preserver in the original container properly sealed andunmixed. Stored at 770 F (400 C), Stone Polish Preserver will have a shelf lifeof 12 months. Do not allow to freeze.





CautionUse in a well ventilated area. Chemical resistant gloves should be worn atall times. Avoid prolonged contact with skin. Do not take internally. Keepsmall children and pets out of area until product or surface has thoroughlydried. Refer to the MSDS for additional information.



Stone Polish Preserver

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: Name: Stone Polish Preserver


Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS# OSHA PEL ACGIH TLVAmmonia Hydroxide* 1336216 35ppm 35ppmNote: * A SARA 313 ChemicalVOC: < 10 g/L

Section 3 - Physical/Chemical CharacteristicsBoiling point: ≤2120 F Specific gravity: 1.04Vapor pressure: Not tested Melting point: Not testedVapor density: Not tested Evaporation rate: Not testedSolubility in water: 100%

Appearance and odor: Opaque white, citrus odor.

Section 4 - Fire And Explosion Hazard DataFlash point: None Flammable limits: N/ALEL: N/A UEL: N/APH: 8.0 - 9.5 DOT#: None

NFPA hazard rating - H F R S and Larger (0-Least, 4-Extreme): 0 0 0 0HMIS hazard rating - H F R and Larger (0-Least, 4-Extreme): 0 0 0Extinguishing media: NoneSpecial fire fighting procedures: NoneUnusual fire & explosion hazards: None

Section 5 - Reactivity DataStability: StableIncompatible materials to avoid: Cationic materials, strong oxidizers.Hazardous decomposition or byproducts: CO, CO2Hazardous polymerization: NoneConditions to avoid: Strong oxidizers

Section 6 - Health Hazard DataRoutes of Entry:Inhalation - PossibleSkin - PossibleIngestion - PossibleHealth hazards - Same as signs and symptoms of exposure.

OSHA Carcinogenicity - None; NTP - None; IARC Monographs - None


Signs and Symptoms of Over Exposure:Eyes: Burning irritation.Skin: Not expected to be a problem.Ingestion: Nausea.Inhalation: Not expected to be a problem.




Skin: Wash with soap and water.

Ingestion: Drink large amounts of water, call physician.

Inhalation: Get person to fresh air. If unconscious, call a physician.

Section 7 - Precautions For Safe Handling And UseSteps to be taken in case material is released or spilled: Soak up with inert,absorbent material. Scoop up and place in a proper waste disposal container.











Toxic Substances Control Act (TSCA): This product and/or all the ingredients contained in this product have been registered under the Toxic Substances Control Act.




www.miraclesealants.comGrout Color Kit

03_2

003

Grout Color Modification ForAll Sanded, Non-sanded, Epoxy Grout and Mortar Joints.Uses■ Kitchen Counters ■ Kitchen Floors ■ Bathroom Showers■ Bathroom Floors ■ Service Porches ■ PatiosSpecial Features■ Easy To Use ■ Seals & Protects■ Durable Formula ■ 9 Color Choices ■ Custom Colors

PRODUCT DE SCRIPTIONKEEP OUT OF REACH OF CHILDREN. Grout Color was designed to changethe color of all grout, mortar and epoxy grout. It will seal and protect newgrout from moisture and staining while allowing restoration of old existinggrout without replacing. Grout Color can be used on both interior and exte-rior applications and comes complete with a unique applicator tip andscrub pad for ease or remove of use. Grout Color is available in 9 popularcolors.Sample TestingDue to the differences of each material, several inconspicuous test patchesshould be completed to assure maximum performance. User must deter-mine suitability of the product for their intended use.Protect Neighboring SurfacesAlways protect neighboring surfaces including wood, carpet, metal, land-scaping and other non masonry surfaces.

APPLIC ATION INSTRUCTIONS - SURFACE PREPAR ATIONRead entire label and PDS before using. Grout should be allowed to cure per manufacturer’s specification prior tousing the product. Grout or mortar must be dry and free of contaminant,including previously applied sealer, dirt, lime, hard water deposits, efflores-cence, rust & other heavy dirt and grime.Test for previously applied sealer by applying a few drops of water to grout.If the water absorbs and darkens the grout then a sealer/coating has notbeen used or is no longer effective. If a sealer/coating is present it must beremoved before continuing. Existing grout must be clean, dry and free ofdirt & grease. If you are working with a porous tile surface it should besealed with the appropriate Miracle Penetrating Sealer/Impregnatorbefore using the Grout Color to prevent surface staining. Make sure toavoid getting Impregnator on grout to be colored.Coating/Wax Removal: To remove existing coatings and/or waxes use MiraStrip or H2O Strip with a grout brush. Extract all dirty remains with a wetvacuum system and allow to dry.Heavy Duty Cleaning: To remove lime, hard water deposits, efflorescence,rust and other heavy dirt, grease and grime use Pre-Cast Concrete Cleaner,GCFR, Porcelain & Ceramic Tile Cleaner, Quarry Kleen or Liquid Poultice asdirected. If an additional non acid, deep cleaning is necessary use LiquidPoultice as directed. All strippers and/or cleaners should be thoroughlyrinsed with clean water and the materials allowed to dry.Light Cleaning: Use Mira Clean #1, Porcelain & Ceramic Tile Cleaner, Tile &Grout Cleaner or Counter Kleen as directed.ApplicationShake well before using. Do not apply when temperature is below 500 F orabove 800 F. Apply Grout Color to the grout or mortar joint with it’s uniqueapplicator tip using a back & forth motion. Try to limit the amount of col-orant that gets onto the presealed tile or stone surface. If you are goingfrom a dark color to a light color, 2 or more applications may be necessary.Allow Grout Color to dry at least 5 - 10 minutes (time will vary depending onambient temperature - test before application).

At this time remove colorant residue from the tile or stone surface withwater and the enclosed nylon scrub pad. Allow a minimum of 2 hours dry-ing time between applications. It should be easily removable from properlysealed porous tile or non-porous tile but bonded permanently to the groutor mortar joint. If Grout Color is easily removed from grout joint, allowlonger curing time. Avoid direct scrubbing on joint joints for at least 20 daysto allow Grout Color to reach maximum durability.Mold, Mildew and Bacteria SanitationFor best results in killing mold, mildew, bacteria and other micro organisms, useMiracle Disinfectant as directed.

Cure TimeGrout Color will be dry to the touch in 45 - 60 minutes and may be put intoservice. For optimum results the area should be kept dry and free fromstaining materials for 72 hours. CoverageCoverage will vary depending on the density, porosity, texture, surfaceabsorption, weather, time solution left on surface and application methods.Used as directed, Grout Color will cover 37 - 145 square feet per 8-oz. bottle(5 square feet per 18 millimeters).

MAINTENANCEFor ongoing maintenance instructions please refer to Miracle Sealants CareGuide. Refer to the Miracle Sealants Product Recommendation Chart forspecific product recommendations.StorageStore Grout Color in the original container, properly sealed to avoid contam-ination evaporation. Stored at 770 F (400 C), Grout Color will have a shelf lifeof 12 months. Do not allow to freeze.Technical SupportFor additional technical support, contact Miracle Sealants Company at1-800-350-1901 or 626-443-6433 ext. 3013Office HoursMonday - Friday from 8:30 am - 5:00 pm PT.1-626-443-6433 or 1-800-350-1901 • Fax: 1-626-443-1435website: www.miraclesealants.comProduct Damaged During TransportationIf product is damaged during transportation contact Info Trac @ 1-800-535-5053Additional ProductsMiracle Sealants Company offers a complete line of water & stain repellents, sealers, cleaner, polishing compounds, diamond abrasives,machinery and accessories for the tile, stone, concrete, metal, fabric andcarpet professional or do-it yourself specialist.CautionGrout Color Kit contains combustible petroleum distillate. All solvents mustbe considered toxic and must be used in a well ventilated area. Good venti-lation means that fresh air is flowing in such a way as to feel a slight breeze.Use open windows and use fans to circulate air. Continue to ventilate untilvapors are eliminated. Exposure to high vapor concentration must be avoid-ed. Inhaling the vapors can be harmful. Keep away from heat and openflames. Avoid prolonged contact with skin. Chemical resistant gloves shouldbe worn at all times. Keep small children and pets out of area until productor surface has thoroughly dried. Refer to the MSDS for additional informa-tion.WarrantyInstructions are a condensed guide and should not be considered com-plete. In the event of failure, the only obligation of Miracle SealantsCompany shall be to replace such products proven to be defective. Beforeusing, user shall determine the suitability of the product for their intendeduse. User assumes all risks and liability whatsoever in connection therein.Neither seller nor manufacturer shall be liable for any injury or inability touse this product.


Grout Color Kit

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of LaborIdentity No: Name: Grout ColorSection 1Manufacturers Name: Miracle Sealants CompanyAddress: 12318 Lower Azusa RoadEmergency Phone: 800-350-1901City: ArcadiaState: CADate Prepared: 04-01-2003Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS# OSHA PEL ACGIH TLVModified Bisphenol A A-Ech Based Epoxy Resin2 -Propoxyethanol 2807-30-9 N/A N/ASolvent Naptha 64742-88-7 N/A N/A(Petroleum) Medium AliphaticMaterial V.O.C.: < 12 lb/gl Coating V.O.C.: < .01 lb/glSection 3 - Physical/Chemical CharacteristicsBoiling point: N/A Specific gravity (H2O=1): 1.04Vapor pressure: Not tested Melting point: Not testedVapor density: Heavier than air Evaporation rate: Slower than etherSolubility in water: DispersibleAppearance and odor: Tinted viscous liquid with mild odor.Section 4 - Fire and Explosion Hazard DataFlash point: N/A Flammable limits: N/ALEL: N/A UEL: N/APH: Not tested DOT#: N/ANFPA hazard rating - H F R S (0-Least, 4-Extreme): 0 0 0 0Extinguishing media: Foam, CO2, dry chemical, water fog.Special fire fighting procedures: Not flammableUnusual fire and explosion hazards: N/ASection 5 - Reactivity DataStability: StableConditions to avoid - Avoid excessive heatIncompatible materials to avoid: Can react vigorously with strong oxidizingagents, mineral acids, and strong mineral or organic bases/especially pri-mary and secondary alpiphatic amines. Reaction with some curing agentsmay produce considerable heat.Hazardous decomposition or byproducts: Carbon dioxide and possibly car-bon monoxideHazardous polymerization: will not occurSection 6 - Health Hazard DataRoutes of Entry:Inhalation - PossibleSkin - PossibleIngestion - PossibleHealth Hazards - Same As Signs And Symptoms Of Exposure.OSHA regulated - No; Carcinogenicity - No; NTP Carcinogen - No;IARC Monographs - NoSigns and Symptoms of Over Exposure:Eyes: Severe irritation, pain and tearing marked by excess redness andswelling of the eye and possibly chemical burns to the eye.Skin: Can dry and defatting skin causing cracks, irritation and dermatitis.Ingestion: Can cause gastrointestinal irritation, vomiting, nausea and diarrhea.Inhalation: Overexposure may result in difficulty breathing, headache, nau-sea, vomiting and drowsiness. Prolonged overexposure may result in lungdamage.Medical conditions generally aggravated by exposure - preexisting eye,skin, and respiratory disorders may be aggravated by exposure to this prod-uct.Preexisting skin or respiratory allergies may increase the chance of develop-ing increased allergy symptoms from exposure to this product.Impaired blood forming functions from preexisting disorders may be aggra-vated by exposure to this product.Emergency and First Aid Procedures:Eyes: Flush with water for 15 minutes. If irritation persists, call physician.Skin: Wash with soap and water. If irritation persists, call physician.Ingestion: Call a physician. Never give anything by mouth to an

unconscious person. Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial res-piration. If breathing is difficult, qualified personnel may administer oxygen.Call a physician.Notice to physician:If more than 2.0 mi per kg has been ingested and vomiting not occurred,emesis should be induced with supervision. Keep victim’s head below hipsto prevent aspiration. If symptoms such as loss of gag reflex, convulsions orunconsciousness occur before emesis, gastric lavage using a cuffed endotracheal tube should be considered.Section 7 - Precautions For Safe Handling And UseSteps to be taken in case material is released or spilled: Remove all sourcesof ignition. Soak up with absorbent material and remove to closed contain-er. Wash area with mild detergent and water. Dispose of in accordance withstate and local regulations.Waste disposal method: Dispose of in accordance with local, state and federal regulations.Precautions to be taken in handling and storing: KEEP AWAY FROM CHIL-DREN. Do not get in eyes, on skin, or clothing. Do not take internally. Keepcontainer closed when not in use. Avoid breathing vapor. Wash thoroughlyafter handling and before eating or drinking. Use with adequate ventilation.Other precautions: No eating or drinking should be allowed in the vicinity ofthis material.Section 8 - Control MeasuresRespiratory protection: Ventilate by opening all doors and windows. If exposure above the TLV or PEL require a niosh approved respiratorequipped for the exposure or suitable respiratory protection per 29 CFR 1910.134 is required.Ventilation: local exhaust if recommended.Protective gloves: Plastic or rubber, chemical resistant.Eye protection: Solvent resistant safety eyewear with splash guards or sideshields is recommended. Contact lenses should not be worn.Other protective clothing or equipment: Chemical resistant clothingEye wash facility and safety shower recommended. Use impermeableaprons and protective clothing whenever possible to prevent skin contact.Work hygienic practices: Wash hands thoroughly before handling foodstuffs, liquids or tobacco products. Use common sense and care aroundchemicals. Never mix this product with other chemicals. Consult your super-visor for all other hygienic and safety practices. All practices depend onyour specific business. Directions for use normally found on label which willdictate engineering and control measures.Section 9 - Shipping & Regulatory ClassificationDOT Shipping Name: Please refer to the Bill of Lading receiving/documents

for up-to-date information.DOT Hazard Class: N/AOSHA Hazard Class: N/AUN/NA Number: N/AEPA Hazard Waste: N/ACPSC Classification: N/ATransportation Class: 55*No reportable quantity hazardous ingredient are present*Toxic Substances Control Act (TSCA): This product and/or all the ingredi-ents contained in this product have been registered under the ToxicSubstances Control Act.NOTE: Miracle Sealants believes the data set forth are accurate. MiracleSealants makes no warranty with respects thereto and disclaims all liabilityor reliance thereon. Such data are offered solely for consideration, investi-gation and verification. Also, the data set forth is for the concentrated fin-ished product. All lab samples are for experimental purposes only and usedat the customers discretion.This product does not contain any material which is subject to the annualreporting requirements under section 313 of SARA, title iii. Contact the EPAFor information regarding the reporting requirements.



www.miraclesealants.comMiracle Disinfectant

03_2

003

Ready to Use Disinfectant For■ Granite Counters ■ Grout ■ Corian™■ Door Knobs ■ Stone Counters ■ Bathroom Surfaces■ Formica™ ■ Telephones ■ Tile Surfaces■ Showers ■ Vinyl & VAT ■ Finished FlooringSpecial Features■ Virucidal ■ Fungicidal ■ Germicidal Disinfects■ Kills HIV-1 ■ Non Acid ■ Non Bleach■ Controls Mold & Mildew

PRODUCT DE SCRIPTIONKEEP OUT OF REACH OF CHILDREN. Miracle Disinfectant is a unique, neu-tral disinfectant cleaner designed for use on granite, marble, limestone, nat-ural stone, ceramic tile, porcelain tile, grout, most finished and high-speedburnished surfaces, conductive flooring, tables, chairs, bathroom bowls,basins, counter tops, door knobs and handles. Miracle Disinfectant is rec-ommended for non-scratch sanitizing of showers and tubs, shower doorsand curtains, fixtures and toilet bowls. Miracle Disinfectant is for use inkitchen, bathroom and other household areas. Miracle Disinfectant is aHospital Use Disinfectant at 2 ounces per gallon (16 milliliters per liter 1:64dilution) and is highly effective in hard water up to 400 ppm.Sample TestingDue to the differences of each substrate, several inconspicuous test patch-es should be completed to assure maximum performance. UUsseerr mmuusstt ddeetteerr--mmiinnee ssuuiittaabbiilliittyy ooff tthhee pprroodduucctt ffoorr tthheeiirr iinntteennddeedd uussee..Protect Neighboring SurfacesAlways protect neighboring surfaces including wood, carpet, metal, land-scaping and other non masonry surfaces.

APPLIC ATION INSTRUCTIONSRead entire label and PDS before using this product. It is a violation ofFederal law to use this product in a manner inconsistent with its labeling.(This product is not to be used as a terminal sterilant/high-level disinfectanton any surfaces or instrument that (1) is introduced directly into the humanbody, either into or in contact with the bloodstream or normally sterile areasof the body, or (2) contacts intact mucous membranes but which does notordinarily penetrate the blood barrier or otherwise enter normally sterileareas of the body. This product may be used to preclean or decontaminatecritical or semi-critical medical devices before sterilization or high-level dis-infection.)Preparation of Use SolutionFor water hardness up to 250 ppm, add (2 ounces per gallon, 16 millilitersper liter) or water hardness up to 400 ppm add (3 ounces per gallon, 24milliliters per liter) of water (1:42), to disinfect hard, non-porous surfaces.For heavy-duty use, add (8 ounces per gallon, 64 milliliters per liter) ofwater (1:16), to disinfect hard, non-porous surfaces.Disinfection/*Virucidal/Mold and Mildew Control Directions:Apply use-solution to hard (inanimate) non-porous surfaces thoroughlywetting surfaces as recommended and required, with a cloth, mop, spongeor sprayer.For heavily soiled surfaces, a preliminary cleaning is required. For sprayerapplications, use a coarse spray device. Spray 6 - 8 inches from the surface;rub with a brush, sponge or cloth. Do not breathe spray mist.Disinfection/*Virucidal Directions:Add 2 ounces per gallon of water, to disinfect hard, non-porous surfaces.Treated surfaces must remain wet for 10 minutes (2 minutes for disinfectionagainst all viruses claimed). Prepare a fresh solution daily or when use solu-tion becomes diluted or soiled.Mold and Mildew Control Directions:Add 2 ounces per gallon of water, to control the growth of mold and mildewand their odors on hard, non-porous surfaces. Thoroughly wet all treatedsurfaces completely. Let air-dry. Repeat application weekly or when growthor odors reappear.Sanitizing Non Food Contact Surface Directions:Add 2 - 3 ounces per gallon (16 - 24 milliliters per liter) of water, to sanitizehard non-porous environmental surfaces. Treated surfaces must remain wetfor 60 seconds.Non-Acid Toilet Bowl Disinfectant/Cleaner Directions:From use solution: Empty toilet bowl or urinal and apply 2 - 3 ounces pergallon (16 - 24 milliliters per liter) use solution to exposed surfaces includ-ing under the rim with a cloth, mop, sponge, brush or sprayer; allow tostand for 10 minutes and flush.*KILLS HIV ON PRECLEANED ENVIRONMENTAL SURFACES/OBJECTS PREVI-OUSLY SOILED WITH BLOOD/BODY FLUIDS in health care settings or other

settings in which there is an expected likelihood of soling of inanimate sur-faces/objects with blood or body fluids and in which the surfaces/objectslikely to be soiled with blood or body fluids can be associated with thepotential for transmissions of human immunodeficiency virus Type 1 (HIV-1)(associated with AIDS).SPECIAL INSTRUCTIONS FOR CLEANING AND DECONTAMINATION AGAINSTHIV-1 ON SURFACES/OBJECT SOILED WITH BLOOD/BODY FLUIDS.

Personal Protection ProcedureClean up should always be done wearing protective latex gloves, gowns,masks and eye protection.Cleaning ProcedureBlood and other body fluids containing HIV-1 must be thoroughly cleanedfrom surfaces and objects before the application of Miracle Disinfectant.Contact TimeLeave the surface wet for 2 minutes with (2 ounces per gallon, 16 millilitersper liter) use solution. Use a 10-minute contact time for disinfection againstall other bacterial and fungi claimed.Disposal of Infectious MaterialsBlood, body fluids, cleaning materials and clothing should be autoclavedand disposed of according to local regulations for infectious waste disposal.Water, Stain & Slip ProtectionTo protect cleaned area from future soiling and staining, we recommendapplying the appropriate Miracle Penetrating Sealer/Impregnator to thesurface.

MAINTENANCEFor ongoing maintenance instructions please refer to Miracle Sealants CareGuide. Refer to the Miracle Sealants Product Recommendation Chart forspecific product recommendations.Storage & DisposalDo not contaminate water, food or feed by storage or disposal. Open dump-ing is prohibited. Store in original container is areas inaccessible to children.Do not reuse empty container. Disposal: Wrap and discard in trash.Precautionary Statement Hazards to Humans and Domestic Animals DangerKEEP OUT OF REACH OF CHILDREN. Corrosive, Causes eye and skin dam-age. Do not get in eyes, on skin or on clothing. Wear goggles or face shieldand rubber chemical resistant gloves when handling. Harmful or fatal ifswallowed. Avoid contamination of food. Wash thoroughly with soap andwater after handling.Cross contamination is of major housekeeping concern not only in hospitalsbut also in schools, institutions and industry.In case of contact, immediately flush eyes or skin with plenty of water for atleast 15 minutes. For eyes, call a physician. Remove and wash contaminat-ed clothing before reuse. If swallowed, drink promptly a large quantity ofegg whites, gelatin solution; or if these are not available, drink large quanti-ties of water. Avoid alcohol. Call a physician immediately.Note to Physician: Probable mucosol damage may contraindicate the useof gastric lavage.Technical SupportFor additional technical support, contact Miracle Sealants Company at1-800-350-1901 or 626-443-6433 ext. 3013Office HoursMonday - Friday from 8:30 am - 5:00 pm PT.1-626-443-6433 or 1-800-350-1901 • Fax: 1-626-443-1435website: www.miraclesealants.comProduct Damaged During TransportationIf product is damaged during transportation contact Info Trac @ 1-800-535-5053.Additional ProductsMiracle Sealants Company offers a complete line of water & stain repellents, sealers, cleaner, polishing compounds, diamond abrasives,machinery and accessories for the tile, stone, concrete, metal, fabric andcarpet professional or do-it yourself specialist.WarrantyInstructions are a condensed guide and should not be considered com-plete. In the event of failure, the only obligation of Miracle SealantsCompany shall be to replace such products proven to be defective. Beforeusing, user shall determine the suitability of the product for their intendeduse. User assumes all risks and liability whatsoever in connection therein.Neither seller nor manufacturer shall be liable for any injury or inability to


Miracle Disinfectant

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: 01154 Name: Miracle Disinfectant


Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS # OSHA PEL ACGIH TLVDidecyl Dimethyl 7173-51-5 N/A N/AAmmonium ChlorideVOC Content: < 10 g/L

Section 3 - Physical/Chemical CharacteristicsBoiling point: > 2120 F Specific gravity: 0.995Vapor pressure: Not tested Melting point: Not testedVapor density: Not tested Evaporation rate : Not testedSolubility in water: 100%

Appearance and odor: Colorless, floral odor.

Section 4 - Fire And Explosion Hazard DataFlash point: None. Flammable limits: Not testedLEL: Not tested UEL: Not testedpH: 6.5 - 8.0 DOT#: None

NFPA hazard rating H F R S (o = Least, 4 = Extreme) 3 0 0 0Extinguishing media: noneSpecial fire fighting procedure: NoneUnusual fire and explosion hazards: None

Section 5 - Reactivity DataStability: Stable Conditions to avoid: NoneIncompatible materials to avoid: Strong oxidizers, anionic materials.Hazardous decomposition or byproducts: CO, CO2Hazardous polymerization: None

Section 6 - Health Hazard DataRoutes of Entry: Inhalation - PossibleSkin - PossibleIngestion - PossibleHealth Hazards - Same as signs and symptoms of exposure.



Signs And Symptoms Of Exposure:Eyes: Burning sensation.Skin: Irritation.Ingestion: Burning irritation, swelling.Inhalation: Irritation.




Skin: Wash off with soap & water.

Ingestion: Drink large amount of water, call physician.

Inhalation: Get person to fresh air. If unconscious, call physician.

Section 7 - precautions for safe handling and useSteps to be taken in case material is released or spilled: Soak up with inert, absorbent material. Scoop up and place in a proper waste disposalcontainer.

Waste disposal method: Dispose of in accordance with federal, state, andlocal regulations.

Precautions to be taken in handling and storing: Store in a cool, dry place,out of direct sunlight. Do not freeze, less than or equal to 320 F, or heatabove 1100 F.




Protective gloves: Plastic or rubber, chemical resistant.Eye protection: Tight fitting splash proof safety goggles.Other protective clothing or equipment: Chemical resistant clothing.









www.miraclesealants.comPorcelain & Ceramic Tile Cleaner

03_2

003

Conditioning Cleaner For■ Porcelain Tile ■ Ceramic Tile ■ Vitreous Tile■ China ■ Stainless Steel ■ Polished Metals■ Honed Natural Stone ■ Corian® ■ Formica®

Special Features■ Clinging Action ■ Easy to Use ■ No Acid■ No Harsh Abrasives ■ Environmentally Friendly■ Interior & Exterior ■ Convenient Squirt Bottle


KEEP OUT OF REACH OF CHILDREN. Miracle Porcelain & Ceramic TileCleaner is a unique penetrating scouring compound that quickly and easilyremoves stubborn stains, grease, soap scum, heel & scuff marks, dirt andeveryday grime. Because it is a creme, it clings to and stays on all surfacesmaking it easy to use. Porcelain & Ceramic Tile Cleaner contains no harshabrasives. Porcelain & Ceramic Tile Cleaner cleans and polishes the sur-face. Porcelain & Ceramic Tile Cleaner is safe for daily use even on honedstone shower and bath surrounds to remove most hard water deposits andsoap scum that develops.





Shake well before and during use. Squeeze onto a damp cloth or spongeand apply directly to the soiled surface. For larger areas it may besqueezed directly onto the surface. Scrub the surface in a circular motionfor best results. Remove loosened dirt with a clean, damp cloth or sponge.Rinse with clean water as needed.

For floor surfaces, squeeze directly onto the surface to be cleaned. Scrubthe surface until clean using a slow speed Marble Master (150 rpm -320rpm) floor machine equipped with a nylon scrub brush or pad. Typicalcleaning is accomplished in seconds. Rinse with clean water where neces-sary to remove loosened dirt and film. After cleaning, once the surface isdry to the touch, it may be put into service again.

Special NotesDo not use on polished marble, limestone or other calcium-base surfaces.Be careful to choose the appropriate stripping pad or brush. Do not allow todry on the surface.

Heavy Duty Cleaning: Use Pre-Cast Concrete Cleaner, GCFR, Quarry Kleenand Liquid Poultice as directed.

Water, Stain & Slip ProtectionFor the best protection and to aid in future cleaning, we recommend sealingall surfaces with the appropriate Miracle Penetrating Sealer/Impregnator.

Anti-Slip/Increased Slip ResistanceFor quarry tile, ceramic tile or porcelain tile floors that require additional slipproperties to increase static coefficient of friction, use Mira Skidd as direct-ed.


CoverageCoverage will vary depending on density, porosity, texture, surface absorp-tion, weather, time solution left on surface and application methods. Usedas directed, Porcelain & Ceramic Tile Cleaner will cover approximately 1200 - 2000 square feet per gallon (100 - 180 square meters) per gallon,300 - 500 square feet (27 - 45 square meters) per quart.

MAINTENANCE


StorageStore Porcelain & Ceramic Tile Cleaner upright in the original container,properly sealed to avoid contamination and evaporation. Stored at 770 F(400 C), Porcelain & Ceramic Tile Cleaner will have a shelf life of 12 months.Do not allow to freeze.





CautionUse in a well ventilated area. Chemical resistant gloves should be worn atall times. Do not take internally. Keep small children and pets out of areauntil product or surface has thoroughly dried. Refer to the MSDS for addi-tional information.



Porcelain & Ceramic Tile Cleaner

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: 3002 Name: Porcelain & Ceramic Tile Cleaner


Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS# OSHA PEL ACGIH TLV2-Butoxyethanol 111762 25ppm 25ppmAmmonia Hydroxide* 1336216 35ppm 35ppm(*Note: A Sara 313 Chemical)VOC: < 24.4 g/L

Section 3 - Physical/Chemical CharacteristicsBoiling point: ≤2120 F Specific gravity: Not testedVapor pressure: Not tested Melting point: Not testedVapor density: Not tested Evaporation rate: Not testedSolubility in water: Miscible

Appearance and odor: Opaque gray, fragrant odor.

Section 4 - Fire And Explosion Hazard DataFlash point: None Flammable limits: Not testedLEL: Not tested UEL: Not testedPH: 8.5 - 10.00 DOT#: None

NFPA hazard rating - H F R S And Larger (0-Least, 4-Extreme): 1 0 0 0Extinguishing media: NoneSpecial fire fighting procedures: NoneUnusual fire and explosion hazards: None

Section 5 - Reactivity DataStability: StableConditions to avoid: NoneIncompatible materials to avoid: Strong OxidizersHazardous decomposition or byproducts: CO, CO2Hazardous polymerization: None

Section 6 - Health Hazard DataRoutes of Entry:Inhalation - PossibleSkin - PossibleIngestion - PossibleHealth Hazards - Same as signs and symptoms of exposure.



Signs and Symptoms of Over Exposure:Eyes: Burning irritationSkin: irritationIngestion: May cause nauseaInhalation: Dizziness, headaches, irritation


Emergency and First Aid Procedures:Eyes: Flush with water for 15 minutes. If irritation persists, call a physician.Skin: Wash with soap and water. If irritation persists, call a physician.Ingestion: Give large amounts of water to dilute. Call a physician. Inhalation: Get person to fresh air. If unconscious, call a physician.

Section 7 - Precautions For Safe Handling And UseSteps to be taken in case material is released or spilled: Soak up with inert, absorbent material. Scoop up and place in a proper waste disposalcontainer.

Waste disposal method: Dispose of in accordance with state and local regu-lations.

Precautions to be taken in handling and storing: Store in a cool, dry place,out of direct sunlight. Do not freeze equal to or less than 320 F or heatabove 1100 F.




Protective gloves: plastic or rubber, chemical resistant.Eye protection: tight fitting, splash proof safety goggles.Other protective clothing or equipment: chemical resistant clothing.






NOTE: Miracle Sealants believes the data set forth are accurate. MiracleSealants makes no warranty with respects thereto and disclaims all liabilityor reliance thereon. Such data are offered solely for consideration, investi-gation and verification. Also, the data set forth is for the concentrated fin-ished product. All lab samples are for experimental purposes only andused at the customers discretion.



www.miraclesealants.comQuarry Kleen

03_2

003

Deep Cleaning Action for Quarry Tile Floor Surfaces

For cleaning oil and grease on all Quarry Tile & Grout Surfaces

Special Features■ Removes Petroleum Base Grease ■ Removes Animal Fats■ No Rinsing ■ No Scrubbing■ Easy To Use ■ No Acid■ Improves Quarry Tile Surface with Repeated Use


KEEP OUT OF REACH OF CHILDREN. Quarry Kleen is a unique formuladesigned to remove grease and oil from quarry tile and grout surfaces.Quarry Kleen will easily remove grease and oil without harming the tile orgrout surface. Quarry Kleen is suitable for interior and exterior use. Greatfor use in kitchen and food processing areas. For floors only.

Sample Testing

Due to the differences of each surface, several inconspicuous test patchesshould be completed to assure maximum performance. User must deter-mine suitability of the product for their intended use.

Protect Neighboring Surfaces

Always protect neighboring surfaces including wood, carpet, metal, land-scaping and other incompatible surfaces.


Read entire label and PDS/MSDS before using.

Remove all loose dirt and debris from the floor. The floor must be free fromany previously applied coatings or waxes.

Heavy Oil & Grease: Use Quarry Kleen undiluted. Apply liberally to thefloor using a sponge mop and allow to sit until the product has thoroughlyabsorbed into the tile and grout. After several hours, the oil and grease willbegin to disappear like magic! Repeat as often as necessary until the quarrytile floor and grout are as clean as possible. No rinsing necessary.

General Maintenance: Dilute 1 ounce of Quarry Kleen with 24 – 99 ouncesof water. Apply liberally to the floor using a sponge mop and allow to situntil the product has thoroughly absorbed into the tile and grout. No rins-ing necessary.

Quarry Kleen will improve the look and cleanliness of the quarry tile floorwith continued use.

Anti-Slip/Increased Slip Resistance

For quarry tile floors that require additional anti-slip properties to increasestatic coefficient of friction, use Mira Skidd as directed.

Water, Stain & Slip Protection

To protect clean surfaces from future soling, staining and increase staticcoefficient of friction, we recommend applying the appropriate MiraclePenetrating Sealer/Impregnator.

Coverage

Coverage will vary depending on density, porosity, texture, surface absorp-tion, weather, time solution left on the surface and application method.Used as directed, Quarry Kleen will cover approximately 500 - 5000 squarefeet per gallon (45 - 500 square meters per 3.785 liters).

MAINTENANCE


Storage

Store Quarry Kleen in the original container, properly sealed to avoid conta-mination and evaporation. Keep in the upright position. Stored at 770 F (400 C), Quarry Kleen will have a shelf life of 12 months. Do not allow tofreeze.

Technical Support

For additional technical support, contact Miracle Sealants Company at1-800-350-1901 or 626-443-6433 ext 3013.

Office Hours

Monday – Friday from 8:30 am – 5:00 pm PT.1-626-443-6433 or 1-800-350-1901 • Fax: 1-626-443-1435website: www.miraclesealants.com

Damage during Transportation

If product is damaged during transportation contact Info Trac @ 1-800-535-5053.

Caution

Warning: Detectable amounts of chemicals known to the State ofCalifornia to cause cancer, birth defects or other reproductive harm maybe found in this product. Quarry Kleen may cause irritation of eyes andskin. Avoid contact and prolonged breathing. Use in a well ventilated area.Open windows to circulate air. Avoid prolonged contact with skin. Chemicalresistant gloves should be worn at all times. Keep away from heat and openflame. Keep small children and pets out of the area until product or surfacehas thoroughly dried. Refer to the MSDS for additional information.

Warranty

Instructions are a condensed guide and should not be considered com-plete. In the event of failure, the only obligation of Miracle SealantsCompany shall be to replace such product proven defective. Before using,user shall determine the suitability of the product for their intended use.User assumes all risks and liability whatsoever in connection therein.Neither seller nor manufacturer shall be liable for any injury or inability touse this product.

Additional Products

Miracle Sealants Company offers a complete line of water & stain repel-lents, sealers, cleaners, polishing compounds, diamond abrasives, machin-ery and accessories for the tile, stone concrete, metal, fabric and carpet pro-fessional or do-it-yourself specialist.


Quarry Kleen

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1299 OMB No. 1218-OD/2Identity No: Name: Quarry Kleen


Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS # OSHA PEL ACGIH TLVN-Methylpryrrolidone* 872-50-4 – –VOC Content: ~ 30%Note: A SARA 313 chemical. 40 CFR 372

Section 3 - Physical/Chemical CharacteristicsBoiling point: Not testedVapor pressure (680F): < 1 Vapor density (Air=1): > 1Solubility in water: Miscible Specific gravity (H20 = 1): ~ 0.98pH: 6 Volatile by volume: 60%VOC exempt components: ~70Evaporation rate(Ether = 1): < 1Appearance and odor: Clear to amber liquid, citrus odor

Section 4 - Fire And Explosion Hazard DataFlash point: 1470 F (TCC) Flammable limits: Not testedLEL: Not tested UEL: Not tested

NFPA Hazard rating - H F R S (0-Least, 4-Extreme): 1 0 0 0Extinguishing media: Water, dry chemical, Co2, foamSpecial fire fighting procedures: Use self-contained breathing apparatusand protective clothing should be worn in fighting fires involving chemicals.Unusual fire and explosion hazards: None. Material is non-flammable &non-combustible.

Section 5 - Reactivity DataStability: StableConditions to avoid: None knownIncompatible materials to avoid: None knownHazardous polymerization: Will not occurHazardous decomposition or by-products: Thermal decomposition can produce CO2, CO, possible traces of HF.

Section 6 - Health Hazard DataRoutes of entry:Inhalation - Yes Skin - YesEyes - Yes Ingestion - YesHealth Hazards - Same as signs & symptoms of over exposureCarcinogenicity: NTP - No; IARC - ;Monograph - No; OSHA regulated - No

Signs & Symptoms of Over Exposure:

Eyes: May cause eye irritation. Direct contact with the solution may causeslight iridal and conjunctival irritation. No permanent damage is anticipated.

Skin: Can be mildly irritating upon prolonged exposure. (Liquid stage only).

Ingestion: Can cause gastrointestinal irritation, nausea, vomiting and diarrhea.

Inhalation: Gross over-inhalation may cause symptoms such as but not limited to, coughing, may aggravate pre-existing lungs disorders.


Eyes: Flush immediately with clean, free-flowing water for 15 minutes.Consult a physician if irritation persists.

Skin: Wash thoroughly with soap and water.

Inhalation: Remove person to fresh air. If not breathing, give artificial respi-ration including oxygen. Call physician.

Ingestion: Give a quart or more of water to drink and induce vomiting asdirected by medical personnel. Provide medical attention. Never administerliquid by mouth to unconscious person.

Section 7 - Precautions for Safe Handling and UseSteps to be taken in case material is released or spilled: Observe precau-tions from other sections. Collect any spills with absorbent material such asvermiculite, place collected material in a polyethylene lined metal containerand seal. Clean up residue with water.

Waste disposal method: Dispose of in accordance with federal, state, andlocal regulations. Do not discard this product into sewer or any waterways.

Storage and handling information: Keep from freezing equal to or less than320 F, do not heat past 1000 F. Store in a cool dark place. Keep container dryand tightly closed when not in use. Avoid contact with eyes. Avoid pro-longed and repeated skin contact. Avoid breathing vapors. Use with ade-quate ventilation. See other precautions listed elsewhere within this MSDS.



Local exhaust: Recommended. Mechanical exhaust: General ventilation system should be provided.


Protective gloves: Plastic or rubber, chemical resistant.Eye protection: Tight fitting, splash proof safety goggles.Other protective clothing or equipment: Eyewash equipment. Apron, cover-alls, boots as necessary to prevent skin contact. Safety shower.



for up to date information.

DOT Hazard Class: Combustible liquid, N.O.S. NA1993OSHA Hazard Class: IATA: Flammable liquid, N.O.S. NA1993UN/NA Number: N/AEPA Hazard Waste: N/ACPSC Classification: N/ATransportation Class: 55

Methylpryrrolidone is listed on California Prop 65.





www.miraclesealants.comTile & Grout Cleaner

03_2

003

Ready to Use Cleaner For■ Sanded Grout ■ Non-sanded Grout ■ Mortar■ Ceramic Tile ■ Quarry Tile ■ Porcelain Tile■ Glazed Ceramic ■ Honed Marble ■ Tumbled Marble■ Honed Limestone ■ Honed Travertine ■ Granite

Special Features■ Non Acid ■ Non Bleach ■ Pleasant Odor■ Removes Mildew ■ Fast Acting ■ User Friendly■ Environmentally Safe


KEEP OUT OF REACH OF CHILDREN. Tile & Grout Cleaner is a non abra-sive, non acidic cleaner designed for use on all grout and ceramic tiles.Strong enough to remove difficult stains, soap scum, dirt, water deposits,mildew and mold, yet is gentle enough for regular use. Tile & Grout Cleaneris easy to use and will not harm sanded and non sanded grout as manyhousehold products can. Environmentally friendly Tile & Grout Cleaner willnot harm tile, chrome, glass, Formica or Corian (NOT FOR USE ON POL-ISHED MARBLE, LIMESTONE OR TRAVERTINE)





Spray Tile & Grout Cleaner onto soiled surface and allow to dwell for sever-al minutes. Wipe clean with a clean scrub pad, brush, sponge or cloth. Donot allow Tile & Grout Cleaner to dry on the surface. Rinse if necessary.Heavy soiled surfaces and more porous surfaces may require scrubbing.Use the appropriate brush for the surface being cleaned. Grout can becleaned with a small nylon brush. To remove heavy build up of mold ormildew use H2O Strip as directed first. Not for use on polished, marble,travertine or limestone.

Heavy Duty Cleaning: Use Pre-Cast Concrete Cleaner, GCFR, Quarry Kleenor Liquid Poultice as directed.

Light Cleaning: Use Mira Clean #1, Porcelain & Ceramic Tile Cleaner, MiraSoap, Stone Cleaner Preserver Grout Cleaner, or Counter Kleen as direct-ed.

Water, Stain & Slip ProtectionTo protect cleaned area from future soiling and staining and increase staticcoefficient of friction, we recommend applying the appropriate MiraclePenetrating Sealer/Impregnator.

Color and Gloss EnhancementFor added color with “Textured and Non polished” surfaces, Mira Mattemay be used. For porous type “Paver”, Saltillo & Terra Cotta Paste &Liquid Wax, Stone Polish, Stone Polish Preserver, Granite Brite, Mira Brite,Mira Dust, Marble Conditioner or Tile Brite may be used as directed.



CoverageCoverage will vary depending on density, porosity, texture. surface absorp-tion, weather, time solution left on surface and application methods. Usedas directed, Tile & Grout Cleaner will clean approximately 4,000 square feetper gallon (363 s.m. per 3.785 liters) and 250 square feet per 8 ounce bot-tle (22 s.m. per .16 liters).

MAINTENANCE


StorageStore Tile & Grout Cleaner in the original upright container, properly sealedand unmixed. Stored at 770 F (400 C), Tile & Grout Cleaner will have a shelflife of 12 months. Do not allow to freeze.



Product Damaged During Transportation If product is damaged during transportation contact Info Trac @ 1-800-535-5053


CautionStore in cool area. Only use this product in well ventilated areas. Good ven-tilation means that fresh air is flowing in such a way to feel a slight breeze.Continue to ventilate until odors are completely eliminated. Avoid contactwith skin. Chemical resistant gloves should be worn at all times. Keep smallchildren and pets out of area until product or surface has thoroughly dried.Refer to the MSDS for additional information.



Tile & Grout Cleaner

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: Name: Tile & Grout Cleaner


Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS # OSHA PEL ACGIH TLVNone None None NoneVOC: 53 g/L

Section 3 - Physical/Chemical CharacteristicsBoiling point: 2120 F Specific gravity: 1.066Vapor pressure: N/A Melting point: N/AVapor density: N/A Evaporation rate: N/ASolubility in water: 100%

Appearance and odor: Colorless, citrus odor

Section 4 - Fire And Explosion Hazard DataFlash Point: None Flammable limits: Not testedLEL: N/A UEL: N/APH: 8.5-10.0 DOT#: N/A

NFPA hazard rating - H F R S (0-Least, 4-Extreme): 1 0 0 0HMIS hazard rating - H F R (0-Least, 4-Extreme): 1 0 0 Extinguishing media: NoneSpecial fire fighting procedures: NoneUnusual fire and explosion hazards: None

Section 5 - Reactivity DataStability: StableConditions to avoid: NoneIncompatible materials to avoid: Strong oxidizerHazardous decomposition byproducts: CO, CO2Hazardous polymerization: None




Signs and Symptoms of Over Exposure:Eyes: Burning Irritation.Skin: Slight Irritation.Ingestion: Nausea.Inhalation: Slight Irritation.

Emergency and First Aid Procedures:Eyes: Flush with water for 15 minutes. If irritation persists, call physician.Skin: Wash off with soap and water. If irritation persists, call physician.Ingestion: Drink large amounts of water. Call physician.Inhalation: Get person to fresh air if unconscious. Call physician.







Protective gloves: Plastic or rubber, chemical resistant.Eye protection: Tight fitting splash proof safety glasses or goggles.Other protective clothing or equipment: Chemical resistant clothing









www.miraclesealants.comPre-Cast Concrete Cleaner

03_2

003

Deep Cleaning Action for Most Concrete/Masonry Surfaces■ Pre-Cast Concrete Paver ■ Concrete■ Masonry ■ Sanded Grout■ Flamed & Honed Granite ■ Cleft & Honed Slate■ Flamed & Honed Limestone ■ Tumbled & Honed Marble■ Cast Stone ■ Unglazed Ceramic Tile■ Quarry Tile ■ Porcelain Tile■ Swimming Pool Slides ■ Tiles at Water Surface■ FountainsSpecial Features■ Easy to Use ■ Fast Acting■ Interior & Exterior ■ Less Expensive

PRODUCT DE SCRIPTIONKEEP OUT OF REACH OF CHILDREN. Pre-Cast Concrete Cleaner is a fastacting, easy to use acid-base cleaner for pre-cast concrete, concrete,masonry, grout, tile and natural stone surfaces. Pre-Cast Concrete Cleanerwill remove cement grout and mortar residue, joint cement, lime & hardwater deposits, efflorescence, rust and other dirt and grime. Pre-CastConcrete Cleaner is suitable for interior and exterior use. Due to the natureof Phosphoric Acid, Pre-Cast Concrete Cleaner is a milder alternative toacid-base cleaners for concrete, tile, grout and natural stone surfaces.Sample TestingDue to the differences of each surface, several inconspicuous test patchesshould be completed to assure maximum performance. User must deter-mine suitability of the product for their intended use.Protect Neighboring SurfacesAlways protect neighboring surfaces including wood, carpet, metal, land-scaping and other incompatible surfaces.

APPLIC ATION INSTRUCTIONSRead entire label and PDS before using.Thoroughly wet the surface to be cleaned with clean water. Pre- CastConcrete Cleaner may be applied with a clean mop or acid resistant brush.Dilute Pre-Cast Concrete Cleaner 15 parts water to 1 part Pre-Cast ConcreteCleaner. For stronger solutions, reduce the water down to as low as 3 parts.Allow the solution to dwell on the surface for 1 - 5 minutes while agitatingwith a brush. Do not allow the solution to dry on the surface. Work in smallareas. Extract dirty remains with a wet vacuum system. Multiple applica-tions may be necessary. After extracting Pre-Cast Concrete CleanerSolution, rinse thoroughly with clean water. Once the surface has beenrinsed, rinse the surface with Mira Clean #1 and clean water (20 - 1) asdirected.If a non-acid deep cleaning is necessary, use Liquid Poultice as directed.Special Notes:Acids, no matter how mild, may etch, lighten or alter the color of tile,cementious and natural stone surfaces. Repeated acid washing may dam-age some surfaces.Avoid contact with all metalsDo not mix with ammoniated cleaners as harmful fumes may result.Allow all new grout, concrete, cement or masonry to cure per manufactur-er’s specification before using Pre-Cast Concrete Cleaner.Light Cleaning: Use Mira Clean #1, Porcelain & Ceramic Tile Cleaner, Tile& Grout Cleaner or Mira Soap as directed.Water, Stain & Slip ProtectionTo protect clean surfaces from future soiling, staining and increase staticcoefficient of friction, we recommend applying the appropriate MiraclePenetrating Sealer/Impregnator.Color and Gloss EnhancementFor added color with “Textured and Non polished” surfaces, Mira Mattemay be used. For porous type “Paver”, Saltillo & Terra Cotta Paste &Liquid Wax, Stone Polish, Stone Polish Preserver, Granite Brite, Mira Brite,Mira Dust, Marble Conditioner or Tile Brite may be used as directed.

Anti-Slip/Increased Slip ResistanceFor quarry tile, ceramic tile or porcelain tile floors that require additional slipproperties to increase static coefficient of friction, use Mira Skidd as direct-ed.Mold, Mildew and Bacteria SanitationFor best results in killing mold, mildew, bacteria and other micro organisms,use Miracle Disinfectant as directed.To degrease a quarry tile floor, use Quarry Kleen as directed.CoverageCoverage will vary depending on density, porosity, texture, surface absorp-tion, weather, time solution left on surface and application method. Used asdirected, Pre-Cast Concrete Cleaner will cover approximately 500 - 2500square feet per gallon (45 - 250 square meters per 3.785 liters).

MAINTENANCEFor ongoing maintenance instructions please refer to Miracle Sealants CareGuide. Refer to the Miracle Sealants Product Recommendation Chart forspecific product recommendations.StorageStore Pre-Cast Concrete Cleaner in the original container, properly sealed toavoid contaminations and evaporation. Keep in the upright position. Storedat 770 F (400 C), Pre-Cast Concrete Cleaner will have a shelf life of 12months. Do not allow to freeze.Technical SupportFor additional technical support, contact Miracle Sealants Company at1-800-350-1901 or 626-443-6433 ext. 3013Office HoursMonday - Friday from 8:30 am - 5:00 pm PT.1-626-443-6433 or 1-800-350-1901 • Fax: 1-626-443-1435website: www.miraclesealants.comProduct Damaged During TransportationIf product is damaged during transportation contact Info Trac @ 1-800-535-5053Additional ProductsMiracle Sealants Company offers a complete line of water & stain repellents, sealers, cleaners, polishing compounds, diamond abrasives,machinery and accessories for the tile, stone, concrete, metal, fabric andcarpet professional or do-it yourself specialist.CautionPre-Cast Concrete Cleaner contains phosphoric acid. Keep away from eyesand skin. Do not inhale or swallow. Acid resistant gloves and clothingshould be worn at all times. NIOSH Respirators should worn. Use in a wellventilated area. Good ventilation means that fresh air is flowing in such away as to feel a slight breeze. Continue to ventilate until odors are eliminat-ed. Inhaling odors can be harmful. Keep away from heat and open flames.Avoid prolonged contact with skin. Keep small children and pets out of areauntil product or surfaces have dried thoroughly. Refer to the MSDS for addi-tional information.WarrantyInstructions are a condensed guide and should not be considered com-plete. In the event of failure, the only obligation of Miracle SealantsCompany shall be to replace such products proven to be defective. Beforeusing, user shall determine the suitability of the product for their intendeduse. User assumes all risks and liability whatsoever in connection therein.Neither seller nor manufacturer shall be liable for any injury or inability touse this product.


Pre-Cast Concrete Cleaner

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: Name: Pre-Cast Concrete Cleaner

Section 1Manufacturers Name: Miracle Sealants CompanyAddress: 12318 Lower Azusa RoadEmergency Phone: 800-350-1901City: Arcadiastate: CAPhone: 626-443-6433Date Prepared: 04-01-2003

Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS # OSHA PEL ACGIH TLVPhosphoric Acid * 766-4382 3 mg/m3 3 mg/m3Note: *A SARA 313 ChemicalVOC: <10 g/L

Section 3 - Physical/Chemical CharacteristicsBoiling point: >2120 F Specific gravity: 1.22Vapor pressure: Not Tested Melting point: Not testedVapor density: Not Tested Evaporation rate: Not testedSolubility in water: 100%

Appearance and odor: Green, acrid odor.

Section 4 - Fire And Explosion Hazard DataFlash point: None Flammable limits: Not testedLEL: Not tested UEL: Not testedpH: .5 - 2.0 DOT#: NA1760

NFPA hazard rating - H F R S (0 - Least, 4 - Extreme): 2 0 0 0Extinguishing media: noneSpecial fire fighting procedures: NoneUnusual fire and explosion hazards: None

Section 5 - Reactivity DataStability: StableIncompatible materials to avoid: Strong oxidizersHazardous decomposition products: CO, CO2Hazardous polymerization: NoneConditions to avoid: None

Section 6 - Health Hazard DataRoutes of Entry:Inhalation - PossibleSkin - PossibleIngestion - PossibleHealth Hazards - Same as signs and symptoms of overexposure.



Signs and Symptoms of Overexposure:Eyes: Burning irritationSkin: IrritantIngestion: Severe burning irritationInhalation: Burning irritationMedical conditions aggravated by exposure: Same as signs and symptomsof overexposure.

Emergency and First Aid Procedures:Eyes: Flush with water for 15 minutes. If irritation persists, call a physician.Skin: Wash off with soap and water; if irritation persists, call a physician.Ingestion: Drink large amounts of water. Call a physician.Inhalation: Get person to fresh air. If unconscious, call a physician
















www.miraclesealants.comGCFRGrout & Concrete Film Remover

03_2

003

Deep Cleaning Action For Most Surfaces Including:■ Flamed & Honed Granite ■ Tumbled & Honed Marble■ Cleft & Honed Slate ■ Quarry Tile■ Flamed & Honed Limestone ■ Ceramic Tile■ Unglazed Ceramic Tile ■ Porcelain Tile■ Sanded Grout ■ Cast Stone■ Concrete ■ MasonrySpecial Features■ Fast Acting ■ Interior & Exterior■ Easy to Use ■ Less Expensive

PRODUCT DE SCRIPTIONKEEP OUT OF REACH OF CHILDREN. GCFR (Grout & Concrete FilmRemover) is a fast acting, heavy duty acid cleaner for textured, non pol-ished, natural and man made surfaces. GCFR removes sanded grout & mor-tar residue, joint cement, lime & hard water deposits, efflorescence, rustand other heavy dirt and grime. GCFR is suitable for interior and exterioruse.Sample TestingDue to the differences of each material, several inconspicuous test patchesshould be completed to assure maximum performance. User must deter-mine suitability of the product for their intended use.Protect Neighboring SurfacesAlways protect neighboring surfaces including wood, carpet, metal, land-scaping and other surfaces.

APPLIC ATION INSTRUCTIONSRead entire label and PDS before using. Thoroughly wet the surface to be cleaned with clean water. GCFR may beapplied with a clean mop or acid resistant brush. Dilute GCFR with water.Start with 1 part GCFR and 20 parts water. For stronger solutions reduce thewater down to as low as 3 parts. Allow GCFR to sit on the surface for 1 - 5minutes while agitating with a brush. Do not allow GCFR to dry on the sur-face. Work small areas. Extract all dirty remains with a wet vacuum system.Multiple applications may be necessary. After extracting GCFR solution,rinse thoroughly with clean water. Once surface is complete, rinse areaswith Mira Clean #1 and clean water (20 - 1) as directed. If a non acid deep cleaning is necessary use Liquid Poultice as directed.Light Cleaning: Use Mira Clean #1, Porcelain & Ceramic Tile Cleaner, Tile& Grout Cleaner, Grout Cleaner or Mira Soap as directed.Special NotesAcids, no mater how mild, may etch, lighten or alter the color of tile, grout,cementitious and natural stone surfaces. Repeated acid washing may dam-age some surfaces.Avoid contact with metals.Do not mix with amoniated cleaners as harmful fumes may result.Allow all new grout, concrete, cement or masonry to cure per the manufac-turer’s specification before using GCFR.Water, Stain & Slip ProtectionTo protect cleaned areas from future soiling, staining and increase staticcoefficient of friction, we recommend applying the appropriate MiraclePenetrating Sealer/Impregnator.Color and Gloss EnhancementFor added color with “Textured and Non polished” surfaces, Mira Mattemay be used. For porous type “Paver”, Saltillo & Terra Cotta Paste &Liquid Wax, Stone Polish, Stone Polish Preserver, Granite Brite, Mira Brite,Mira Dust, Marble Conditioner or Tile Brite may be used as directed.Anti-Slip/Increased Slip ResistanceFor quarry tile, ceramic tile or porcelain tile floors that require additional slipproperties to increase static coefficient of friction, use Mira Skidd as direct-ed.Mold, Mildew and Bacteria SanitationFor best results in killing mold, mildew, bacteria and other micro organisms,use Miracle Disinfectant as directed.Degrease Quarry TileUse Quarry Kleen as directed.

CoverageCoverage will vary depending on density, porosity, texture, surface absorp-tion, weather, time solution left on the surface and application method.Used as directed, GCFR will cover approximately 1,000 - 2,000 square feetper gallon (90 - 185 square meters per 3.785 liters).

MAINTENANCEFor ongoing maintenance instructions please refer to Miracle Sealants CareGuide. Refer to the Miracle Sealants Product Recommendation Chart forspecific product recommendations.StorageStore GCFR in the original container, properly sealed to avoid contaminationand evaporation. Stored at 770 F (400 C), GCFR will have a shelf life of 12months. Do not allow to freeze.Technical SupportFor additional technical support, contact Miracle Sealants Company at1-800-350-1901 or 626-443-6433 ext. 3013Office HoursMonday - Friday from 8:30 am - 5:00 pm PT.1-626-443-6433 or 1-800-350-1901 • Fax: 1-626-443-1435website: www.miraclesealants.comProduct Damaged During Transportation If product is damaged during transportation contact Info Trac @ 1-800-535-5053Additional ProductsMiracle Sealants Company offers a complete line of water & stain repellents, sealers, cleaner, polishing compounds, diamond abrasives,machinery and accessories for the tile, stone, concrete, metal, fabric andcarpet professional or do-it yourself specialist.CautionGCFR contains hydrochloric acid. Keep away from eyes and skin. Do notinhale or swallow. Chemical resistant gloves and respirators should be wornat all times. Use in a well ventilated area. Good ventilation means that freshair is flowing in such a way as to feel a slight breeze. Continue to ventilateuntil odors are completely eliminated. Inhaling the odors can be harmful.Keep away from heat and open flames. Avoid prolonged contact with skin.Keep small children and pets out of area until product or surfaces has thor-oughly dried. Refer to MSDS for additional information.WarrantyInstructions are a condensed guide and should not be considered com-plete. In the event of failure, the only obligation of Miracle SealantsCompany shall be to replace such products proven to be defective. Beforeusing, user shall determine the suitability of the product for their intendeduse. User assumes all risks and liability whatsoever in connection therein.Neither seller nor manufacturer shall be liable for any injury or inability touse this product.


GCFRGrout & Concrete Film Remover

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: Name: Grout And Concrete Film Remover


Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS # OSHA PEL ACGIH TLVHydrochloric Acid 7647-01-0 5ppm 5ppmVOC Content: < 10 g/L

Section 3 - Physical/Chemical CharacteristicsBoiling point: > 2120F Specific gravity: 1.125Vapor pressure : Not tested Melting point: Not testedVapor Density : Not tested Evaporation rate: Not testedSolubility in water: 100% Density: NAPhysical state: NA Freezing point: NAPH: 0.5-2.0 % Volatile: NAOdor threshold: NA Acid/Alkalinity: NASolubility in organic solvent: NA

Appearance and odor: Amber color, acrid odor

Section 4 - Fire And Explosion Hazard DataFlash point: None Flammable limits: N/ALEL: None UEL: Not testedDOT#: NA 1760

NFPA hazard rating - H F R S ( 0 - Least, 4 - Extreme): 3 0 0 0HMIS hazard rating - H F R ( 0 - Least, 4 - Extreme): 3 0 0Extinguishing media: NoneSpecial fire fighting procedures: None

Section 5 - Reactivity DataStability: StableConditions to avoid: NoneIncompatible materials to avoid: Strong oxidizers, ammoniaHazardous Polymerization: CO, CO2Hazardous decomposition products: None

Section 6 - Health Hazard DataRoutes of Entry:Inhalation - PossibleSkin - PossibleIngestion - PossibleHealth hazards: Same as signs and symptoms of overexposure.

OSHA Carcinogenicity: None; NTP: None; IARC Monographs: None


Sign And Symptoms Of Over Exposure:Eyes: Burning irritation.Skin: Severe irritation.Ingestion: Poisonous, toxic, irritant.Inhalation: Burning Irritation.

Medical conditions aggravated: Same as signs and symptoms of overexposure.



Skin: Wash with soap and water. If irritation persists, call a physician.

Ingestion: Drink large amounts of water. Call a physician.

Inhalation: Get person to fresh air. If unconscious, call a physician.

Section 7 - Precautions and Safe Handling And UseSteps to be taken in case material is released or spilled: Soak up with inert, absorbent material. Scoop up and place in a proper waste disposalcontainer.

Waste disposal method: Dispose of in accordance with local, state, and fed-eral regulations.


Other precautions: KEEP OUT OF REACH OF CHILDREN. Follow directionson the container for proper use of this product.


Protective gloves: Rubber or plastic, chemical resistant.Eye protection: Tight fitting, splash proof safety glasses or goggles.Other protective clothing or equipment: Chemical resistant clothing.




DOT Hazard Class:OSHA Hazard Class:UN/NA Number:EPA Hazard Waste:Transportation Class: 55





www.miraclesealants.comMira Clean #1

03_2

003

Deep Cleaning Action For Most Surfaces Including■ Sanded Grout ■ Non-sanded Grout ■ Quarry Tile■ Clay Pavers ■ Limestone ■ Ceramic Tile■ Glazed Tile ■ Granite ■ Marble■ Terrazzo ■ Brick ■ Slate■ Travertine ■ Concrete ■ MasonryUses■ Interior & Exterior ■ Counters ■ Floors■ Walls ■ Showers ■ All GroutSpecial Features■ Biodegradable ■ Environmentally Safe■ Easy to Use ■ Cost Effective

PRODUCT DE SCRIPTIONKEEP OUT OF REACH OF CHILDREN. Mira Clean #1 is an environmentallysafe, biodegradable, non acidic cleaner & degreaser developed specificallyfor tile, grout, natural & cast stone and masonry surfaces. Mira Clean #1will handle difficult stains, yet is gentle enough for everyday use. MiraClean #1 is very effective as an ongoing maintenance cleaner for surfacespreviously sealed with the appropriate Miracle Penetrating Sealer/Impregnator. Mira Clean #1 will not harm the polish on polished stone sur-faces.Sample TestingDue to the differences of each material, several inconspicuous test patchesshould be completed to assure maximum performance. User must deter-mine suitability of the product for their intended use.Protect Neighboring SurfacesAlways protect neighboring surfaces including wood, carpet, metal, land-scaping and other non masonry surfaces.

APPLIC ATION INSTRUCTIONSRead entire label and PDS before using. Mira Clean #1 is concentrated and requires dilution. To remove difficultstains such as oil and grease, mix one part Mira Clean #1 with 3 parts hotwater (cold water can be used but cleaning action will be reduced). ApplyMira Clean #1 with a clean mop or self-feeding floor machine. Allow thesolution to stand for 10 minutes while agitating periodically with the appro-priate scrub brush. DO NOT allow solution to dry on the surface. Extract allthe dirty remains with a wet vacuum system. Rinse the surface thoroughlywith hot water and allow to dry. Difficult stains may require a second appli-cation. If area is still dirty after the second cleaning use Liquid Poultice,Precast Concrete Cleaner, Sulfamic Acid Crystals, Porcelain Cleaner,Quarry Kleen or GCFR (Grout & Concrete Film Remover) as directed.For general cleaning, mix one cup Mira Clean #1 with 3 gallons hot waterfollowing the same instructions as before.Heavy Duty Cleaning: Use Pre-Cast Concrete Cleaner, GCFR, Quarry Kleenand Porcelain & Ceramic Tile Cleaner as directed.Surface Coating/Wax RemovalTo remove existing coatings and/or waxes, use Mira Strip or H2O Strip asdirected.

Water, Stain & Slip ProtectionTo protect cleaned area from future soiling and staining and increase staticcoefficient of friction, we recommend applying the appropriate MiraclePenetrating Sealer/Impregnator.Color and Gloss EnhancementTo enhance color and gloss use Mira Matte, Saltillo & Terra Cotta Paste &Liquid Wax, Mira Shine or Stone Polish as directed.Polish EnhancementUse Marble Conditioner, Mira Dust, Granite Brite, Mira Brite, Mira Pad andTile Brite as directed.Anti-Slip/Increased Slip ResistanceFor quarry tile, ceramic tile or porcelain tile floors that require additional slipproperties to increase static coefficient of friction, use Mira Skidd as direct-ed.Mold, Mildew and Bacteria SanitationFor best results in killing mold, mildew, bacteria and other micro organisms,use Miracle Disinfectant as directed.CoverageCoverage will vary depending on density, porosity, texture, surface absorp-tion, weather, time solution left on surface and application methods. Usedas directed, Mira Clean #1 will clean up to 10,000 square feet per gallon(927 square meters per 3.785 litters).

MAINTENANCEFor ongoing maintenance instructions please refer to Miracle Sealants CareGuide. Refer to the Miracle Sealants Product Recommendation Chart forspecific product recommendations.StorageStore Mira Clean #1 in the original container properly sealed and unmixed.Stored at 770 F (400 C), Mira Clean #1 will have a shelf life of 12 months. Donot allow to freeze.Technical SupportFor additional technical support, contact Miracle Sealants Company at1-800-350-1901 or 626-443-6433 ext. 3013Office HoursMonday - Friday from 8:30 am - 5:00 pm PT.1-626-443-6433 or 1-800-350-1901 • Fax: 1-626-443-1435website: www.miraclesealants.comProduct Damaged During TransportationIf product is damaged during transportation contact Info Trac @ 1-800-535-5053Additional ProductsMiracle Sealants Company offers a complete line of water & stain repel-lents, sealers, cleaner, polishing compounds, diamond abrasives, machin-ery and accessories for the tile, stone, concrete, metal, fabric and carpetprofessional or do-it yourself specialist.WarrantyInstructions are a condensed guide and should not be considered com-plete. In the event of failure, the only obligation of Miracle SealantsCompany shall be to replace such products proven to be defective. Beforeusing, user shall determine the suitability of the product for their intendeduse. User assumes all risks and liability whatsoever in connection therein.Neither seller nor manufacturer shall be liable for any injury or inability touse this product.CautionUse only in well ventilated area. Open windows and use fans to circulate air.Chemical resistant gloves should be worn at all times. Keep small childrenand pets out of area until product or surface has thoroughly dried. Refer tothe MSDS for additional information.


Mira Clean #1

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: L0323012 Name: Mira Clean #1


Section 2 - Hazardous Ingredient/Identity InformationHazardous Components: NoneVOC: < 68 g/LNote: Non-carcinogenic


Appearance and odor: Amber, bland odor

Section 4 - Fire And Explosion Hazard DataFlash Point: None Flammable Limits: Not testedLEL: None UEL: NonePH: 6.5 — 7.5 DOT#: None

NFPA hazard rating - H F R S (0-Least, 4-Extreme): 0 0 0 0HMIS hazard rating - H F R (0-Least, 4-Extreme): 0 0 0Extinguishing media: CO2, dry foamSpecial fire fighting procedures: NoneUnusual fire and explosion hazards: None

Section 5 - Reactivity DataStability: StableConditions to avoid: NoneIncompatible materials to avoid: NoneHazardous decomposition or byproducts: NoneHazardous polymerization: Will not occur




Signs and Symptoms of Over Exposure:Eyes: Burning sensationSkin: Not expected to be a problemIngestion: NauseaInhalation: Not expected to be a problem




Skin: Wash off with soap and water.


Inhalation: Remove to fresh air.







Protective gloves: Plastic or rubber, chemical resistant.Eye protection: Tight fitting, splash proof safety glasses.Other protective clothing or equipment: Chemical resistant clothing.




DOT Hazard Class:OSHA Hazard Class:UN/NA Number:EPA Hazard Waste:CPSC Classification:Transportation Class: 55





www.miraclesealants.comMira Soap

03_2

003

No Rinse Liquid Stone Soap Cleaner ForNon polished, Honed, Tumbled or Textured Surfaces including:

■ Limestone ■ Marble ■ Terrazzo ■ Concrete■ Travertine ■ Granite ■ Slate ■ Clay

Uses■ Interior & Exterior

Special Features■ No Rinse ■ Biodegradable■ Easy to Use ■ Natural Protection


KEEP OUT OF REACH OF CHILDREN. Mira Soap is a unique, biodegradable,natural stone soap designed for cleaning and maintaining stone containingcalcium. Mira Soap reacts with the calcium in terrazzo, limestone, marble orconcrete to produce a protective layer that helps resists wear to the surface.As the protective shield is worn away, it will be repaired during the nextcleaning cycle. Because Mira Soap reacts with calcium in the surface thereis no risk of buildup. Once the surface is dry, it can be buffed with a floormachine using a white pad or polishing brush to increase the shine. MiraSoap is excellent for regular maintenance and will enrich, nourish anddeepen the natural color and patina of the surface.



E XI STING INSTALL ATIONS - SURFACE PREPAR ATION

Surface must be dry and free of contaminant, including previously appliedsealers, dirt, lime, hard water deposits, efflorescence, rust & other heavydirt and grime.

Floor Coating/Wax Removal:To remove existing coatings and/or waxes use Mira Strip or H2O Strip perspecification.

Heavy Duty Cleaning: To remove lime, hard water deposits, efflorescence,rust and other heavy dirt, grease and grime use GCFR (Grout & ConcreteFilm Remover), Pre Cast Concrete Cleaner or Quarry Kleen following theinstructions carefully.

For a non-acid deep cleaning, use Liquid Poultice as directed.

Light Cleaning: Use Mira Clean #1, Stone Cleaner Preserver or CounterKleen as directed.

Application Instructions:Read entire label and PDS before using.

Always dry dust mop or sweep area to be cleaned before applying MiraSoap. During the first six months, damp mop the surface with Mira Soapand water on a regular basis by mixing 1 part Mira Soap to 10 parts water.After six months, maintain area by damp mopping with a ratio of 1 part MiraSoap to 20 parts water. When the solution becomes dirty or cloudy, replaceit. Do not rinse Mira Soap off the floor. Use as directed in proper solutionand allow to dry.

Light buffing with a floor machine (175 - 2000 rpm) and white pad or softbrush will improve the shine. Allow Mira Soap to dry for at least 45 minutesbefore buffing. Mira Soap is also effective on counters and vertical surfaces.

Water, Stain & Slip ProtectionTo protect cleaned area from future soiling and staining and increase staticcoefficient of friction, we recommend applying the appropriate MiraclePenetrating Sealer/Impregnator per specification, prior to first applicationof Mira Soap.


CoverageCoverage will vary depending on density, porosity, texture, surface absorp-tion, weather, time solution left on surface and application methods. Usedas directed, Mira Soap will clean from 1000 - 7,000 square feet per gallon(90 - 630 square meters per 3.785 liters).

MAINTENANCE


StorageStore Mira Soap in the original container, properly sealed and unmixed.Stored at 770 F (400 C), Mira Soap will have a shelf life of 12 months. Do notallow to freeze.



Product Damaged During Transportation If product is damaged during transportation contact Info Trac @ 1-800-535-5053


CautionMira Soap use only in well ventilated areas. Good ventilation means thatfresh air is flowing in such a way as to feel a slight breeze. Open windowsand use fans to circulate air. Chemical resistant gloves should be worn at alltimes. Keep small children and pets out of area until product or surfaceshas thoroughly dried. Refer to the MSDS for additional information.

WarrantyInstructions are a condensed guide and should not be considered com-plete. In the event of failure, the only obligation of Miracle SealantsCompany shall be to replace such products proven to be defective. Beforeusing, user shall determine the suitability of the product for their intendeduse. User assumes all risks and liability whatsoever in connection therein.Neither seller nor manufacturer shall be liable for any injury or inability touse this product.\


Mira Soap

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: 7858 Name: Mira Soap


Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS # OSHA PEL ACGIH TLVDipropylene Glycol 34590-94-8 100ppm 100ppmMethyl EtherVOC: 120 g/L

Section 3 - Physical/Chemical CharacteristicsBoiling point: > 2120F Specific gravity: .97Vapor pressure: Not tested Melting point: Not testedVapor density: Not tested Evaporation rate: Not testedSolubility in water: 100%

Appearance and Odor: Amber/Almond Odor

Section 4 - Fire and Explosion Hazard DataFlash point: None Flammable limits: Not testedLEL: Not tested UEL: Not testedPH: 8.0 - 9.5 DOT#: NoneNFPA hazard rating - H F R S (0-Least, 4-Extreme): 1 0 0 0HMIS hazard rating - H F R (0-Least, 4-Extreme): 1 0 0Extinguishing media: CO2, dry foamSpecial fire fighting procedures: NoneUnusual fire and explosion hazards: None

Section 5 - Reactivity DataStability: StableConditions to avoid: NoneIncompatible materials to avoid: Strong OxidizersHazardous decomposition or byproducts: CO, CO2Hazardous polymerization: None


Health hazards - Same as signs and symptoms of exposure.

OSHA Carcinogenicity - None - NTP - None - IARC Monographs - None


Signs And Symptoms Of Over Exposure:Eyes: Burning irritationSkin: Dryness, slight irritationIngestion: Nausea, irritationInhalation: Slight irritation



Eyes: Flush with water for 15 minutes. If irritation persists, call physician.

Skin: Wash off with soap and water. If irritation persists, call physician.


Inhalation: Get person to fresh air. If unconscious, call physician.
















www.miraclesealants.comLiquid Poultice Part ADeep Cleaning Solution

03_2

003

Deep Cleaning Action For Most Surfaces Including:■ Sanded Grout ■ Masonry ■ Quarry Tile■ Clay Pavers ■ Limestone ■ Ceramic Tile■ Glazed Tile ■ Marble ■ Terrazzo■ Brick ■ Stucco ■ Concrete■ Non-sanded Grout ■ Any Acid-Sensitive Natural StoneUses■ Kitchen Counters ■ Kitchen Floors ■ Bathroom Showers■ Lobby Floors ■ Bathroom Floors ■ Porches & Patios■ Interior Walls ■ Exterior Walls ■ MonumentsSpecial Features■ Biodegradable ■ Easy to Use■ Interior & Exterior Use ■ Environmentally Safe■ No Acid ■ Safe for All Polished Stone

PRODUCT DE SCRIPTIONKEEP OUT OF REACH OF CHILDREN. Liquid Poultice is a unique two partformulation, (Bottle A & Bottle B), designed for deep cleaning all porousstone surfaces and grout. The percolating cleaning action of Liquid Poulticepenetrates deep into the pores of the surface to safely lift out mold stains,mildew stains, algae stains, fungus stains, food grease, coffee, tea andother types of foreign matter from natural stone, grout, tile, concrete, stuc-co and masonry surfaces.Liquid Poultice is an environmentally safe, biodegradable, non-acidic cleaner that will not harm the polish on polished stone surfaces.Sample TestingDue to the differences of each material, several inconspicuous test patchesshould be completed to assure maximum performance. User must deter-mine suitability of the product for their intended use.Protect Neighboring SurfacesAlways protect neighboring surfaces including masonry, wood, carpet,metal, landscaping and other non masonry surfaces.

APPLIC ATION INSTRUCTIONSRead entire label and PDS before using. Thoroughly mix 1 part of Liquid Poultice (Bottle A) with 2 parts hot water.(Cold water can be used but cleaning action will be reduced). Add 1 partActivator (Bottle B) to the above mixture. Once the Activator is added, besure to keep the mixture vented to prevent oxygen build up. Mix in an opencontainer. Once Activator (Bottle B) has been added, the solution must beused within 72 hours.Wet the surface to be cleaned with water lightly before starting. ApplyLiquid Poultice with Miracle Applicator, a clean mop, self-feeding floormachine or sprayer. Allow the solution to stand for 45 minutes while agitat-ing periodically with the appropriate scrub brush. DO NOT allow solution todry on the surface. If surface starts to dry, add more Liquid PoulticeSolution. Extract all the dirty remains with a wet vacuum system. Rinse thesurface thoroughly with hot water and allow to dry. Difficult stains mayrequire a second application. On wall surfaces a fine mist of Liquid Poulticemaybe left to dry after initial cleaning is complete. Liquid Poultice will con-tinue to pull dirt to the surface for up to 72 hours after completion. Allow todry 24 - 72 hours before sealing the surface.

Water, Stain & Slip ProtectionTo protect cleaned areas from future soiling, staining and increase staticcoefficient of friction. We recommend applying the appropriate MiraclePenetrating Sealer/Impregnator.Color and Gloss EnhancementFor added color with “Textured and Non polished” surfaces, Mira Mattemay be used. For porous type “Paver”, Saltillo & Terra Cotta Paste &Liquid Wax, Stone Polish, Stone Polish Preserver, Granite Brite, Mira Brite,Mira Dust, Marble Conditioner or Tile Brite may be used as directed.Polish EnhancementPeriodically use Mira Dust, Marble Conditioner, Mira Brite, Mira Pad orGranite Brite as directed.Anti-Slip/Increased Slip ResistanceFor quarry tile, ceramic tile or porcelain tile floors that require additional slipproperties to increase static coefficient of friction, use Mira Skidd as direct-ed.Mold, Mildew and Bacteria SanitationFor best results in killing mold, mildew, bacteria and other micro organisms,use Miracle Disinfectant as directed.Heavy Duty Cleaning: To remove lime, hard water deposits, efflorescence,rust, heavy grease and other dirt and grime use GCFR, Pre-Cast ConcreteCleaner or Quarry Kleen as directed.CoverageCoverage will vary depending on density, porosity, texture, surface absorp-tion, weather, time solution left on surface and application method. Used asdirected, Liquid Poultice will cover approximately 500 - 1,000 square feetper gallon (45 - 93 square meters per 3.785 liters).

MAINTENANCEFor ongoing maintenance instructions please refer to Miracle Sealants CareGuide. Refer to the Miracle Sealants Product Recommendation Chart forspecific product recommendations.StorageStore Liquid Poultice (Bottle A) and Activator (Bottle B) upright in theiroriginal containers, properly sealed and unmixed. Stored at 770 F (400 C),Liquid Poultice will have a shelf life of 12 months. Do not allow to freeze. Technical SupportFor additional technical support, contact Miracle Sealants Company at1-800-350-1901 or 626-443-6433 ext. 3013Office HoursMonday - Friday from 8:30 am - 5:00 pm PT.1-626-443-6433 or 1-800-350-1901 • Fax: 1-626-443-1435website: www.miraclesealants.comProduct Damaged During TransportationIf product is damaged during transportation contact Info Trac @ 1-800-535-5053Additional ProductsMiracle Sealants Company offers a complete line of water & stain repellents, sealers, cleaner, polishing compounds, diamond abrasives,machinery and accessories for the tile, stone, concrete, metal, fabric andcarpet professional or do-it yourself specialist.CautionLiquid Poultice is an alkaline liquid. Store in cool area. Only use this prod-uct in a well ventilated area. Good ventilation means that fresh air is flowingin such a way as to feel a slight breeze. Continue to ventilate until odors arecompletely eliminated. Avoid contact with skin. Chemical resistant glovesshould be worn at all times. Keep small children and pets out of area untilproduct or surfaces has thoroughly dried. Refer to the MSDS for additionalinformation.WarrantyInstructions are a condensed guide and should not be considered com-plete. In the event of failure, the only obligation of Miracle SealantsCompany shall be to replace such products proven to be defective. Beforeusing, user shall determine the suitability of the product for their intendeduse. User assumes all risks and liability whatsoever in connection therein.Neither seller nor manufacturer shall be liable for any injury or inability touse this product.


Liquid Poultice Part ADeep Cleaning Solution

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: Name: Liquid Poultice (A)


Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS # OSHA PEL ACGIH TLV2-Hydroxyethylamine 141-43-5 3 ppm 3 ppm2-Butoxy Ethanol * 111-76-2 25 ppm 25 ppm* Note: Non-CarcinogenicVOC : 111.5 g/l

Section 3 - Physical/Chemical CharacteristicsBoiling point: 2120 F Specific gravity: 1.013Vapor pressure (Mmhg): Not tested Melting point: Not testedVapor density: Not tested Evaporation rate: Not testedSolubility in water: 100%

Appearance and odor: Colorless, solvent odor

Section 4 - Fire And Explosion Hazard DataFlash point: None Flammable limits: Not testedLEL: None UEL: NonePH: 10.5-12.5 DOT#: None

NFPA hazard rating - H F R S (0-Least, 4-Extreme): 2 0 0 0HMIS hazard rating - H F R (0-Least, 4-Extreme): 2 0 0Extinguishing media: CO2, dry foam. Special fire fighting procedures: NoneUnusual fire and explosion hazards: None

Section 5 - Reactivity DataStability: StableConditions to avoid: NoneHazardous polymerization: Will not occurHazardous decomposition or byproducts: NoneIncompatible materials to avoid: None

Section 6 - Health Hazard DataRoutes of Entry:Inhalation - PossibleSkin - PossibleIngestion - PossibleEyes - PossibleHealth hazards - Same as signs and symptoms of overexposure.


Signs and Symptoms of Over Exposure:Eyes: Burning sensation, irritationSkin: IrritationIngestion: Burning irritationInhalation: Slight irritation

Medical conditions generally aggravated by exposure.Same as signs and symptoms of overexposure.

Emergency and First Aid Procedures:Eyes: Flush immediately with plenty of water for 15 minutes while holdingeyelids open. If irritation persists, call physician.Skin: Flush skin with water, follow by washing with soap and water. If irrita-tion persists, call physician.Inhalation: Move victim to fresh air, and provide oxygen if breathing is diffi-cult. Call physician.Ingestion: Drink large amounts of water. Call physician



Precautions to be taken in handling and storing: Store in a cool, dry place,out of direct sunlight. Do not freeze, less than or equal to 320 F, or heatabove 1100 F.



Ventilation:Local exhaust - If available Special - noneMechanical - If available Other - none

Protective gloves: Plastic or rubber, chemical resistant.Eye protection: Tight fitting, splash proof safety goggles.Other protective clothing or equipment: None.









www.miraclesealants.comLiquid Poultice Part BDeep Cleaning Solution

03_2

003

Deep Cleaning Action For Most Surfaces Including:■ Sanded Grout ■ Masonry ■ Quarry Tile■ Clay Pavers ■ Limestone ■ Ceramic Tile■ Glazed Tile ■ Marble ■ Terrazzo■ Brick ■ Stucco ■ Concrete■ Non-sanded Grout ■ Any Acid-Sensitive Natural StoneUses■ Kitchen Counters ■ Kitchen Floors ■ Bathroom Showers■ Lobby Floors ■ Bathroom Floors ■ Porches & Patios■ Interior Walls ■ Exterior Walls ■ MonumentsSpecial Features■ Biodegradable ■ Easy to Use■ Interior & Exterior Use ■ Environmentally Safe■ No Acid ■ Safe for All Polished Stone

PRODUCT DE SCRIPTIONKEEP OUT OF REACH OF CHILDREN. Liquid Poultice is a unique two partformulation, (Bottle A & Bottle B), designed for deep cleaning all porousstone surfaces and grout. The percolating cleaning action of Liquid Poulticepenetrates deep into the pores of the surface to safely lift out mold stains,mildew stains, algae stains, fungus stains, food grease, coffee, tea andother types of foreign matter from natural stone, grout, tile, concrete, stuc-co and masonry surfaces.Liquid Poultice is an environmentally safe, biodegradable, non-acidic cleaner that will not harm the polish on polished stone surfaces.Sample TestingDue to the differences of each material, several inconspicuous test patchesshould be completed to assure maximum performance. User must deter-mine suitability of the product for their intended use.Protect Neighboring SurfacesAlways protect neighboring surfaces including masonry, wood, carpet,metal, landscaping and other non masonry surfaces.

APPLIC ATION INSTRUCTIONSRead entire label and PDS before using. Thoroughly mix 1 part of Liquid Poultice (Bottle A) with 2 parts hot water.(Cold water can be used but cleaning action will be reduced). Add 1 partActivator (Bottle B) to the above mixture. Once the Activator is added, besure to keep the mixture vented to prevent oxygen build up. Mix in an opencontainer. Once Activator (Bottle B) has been added, the solution must beused within 72 hours.Wet the surface to be cleaned with water lightly before starting. ApplyLiquid Poultice with Miracle Applicator, a clean mop, self-feeding floormachine or sprayer. Allow the solution to stand for 45 minutes while agitat-ing periodically with the appropriate scrub brush. DO NOT allow solution todry on the surface. If surface starts to dry, add more Liquid PoulticeSolution. Extract all the dirty remains with a wet vacuum system. Rinse thesurface thoroughly with hot water and allow to dry. Difficult stains mayrequire a second application. On wall surfaces a fine mist of Liquid Poulticemaybe left to dry after initial cleaning is complete. Liquid Poultice will con-tinue to pull dirt to the surface for up to 72 hours after completion. Allow todry 24 - 72 hours before sealing the surface.

Water, Stain & Slip ProtectionTo protect cleaned areas from future soiling, staining and increase staticcoefficient of friction. We recommend applying the appropriate MiraclePenetrating Sealer/Impregnator.Color and Gloss EnhancementFor added color with “Textured and Non polished” surfaces, Mira Mattemay be used. For porous type “Paver”, Saltillo & Terra Cotta Paste &Liquid Wax, Stone Polish, Stone Polish Preserver, Granite Brite, Mira Brite,Mira Dust, Marble Conditioner or Tile Brite may be used as directed.Polish EnhancementPeriodically use Mira Dust, Marble Conditioner, Mira Brite, Mira Pad orGranite Brite as directed.Anti-Slip/Increased Slip ResistanceFor quarry tile, ceramic tile or porcelain tile floors that require additional slipproperties to increase static coefficient of friction, use Mira Skidd as direct-ed.Mold, Mildew and Bacteria SanitationFor best results in killing mold, mildew, bacteria and other micro organisms,use Miracle Disinfectant as directed.Heavy Duty Cleaning: To remove lime, hard water deposits, efflorescence,rust, heavy grease and other dirt and grime use GCFR, Pre-Cast ConcreteCleaner or Quarry Kleen as directed.CoverageCoverage will vary depending on density, porosity, texture, surface absorp-tion, weather, time solution left on surface and application method. Used asdirected, Liquid Poultice will cover approximately 500 - 1,000 square feetper gallon (45 - 93 square meters per 3.785 liters).

MAINTENANCEFor ongoing maintenance instructions please refer to Miracle Sealants CareGuide. Refer to the Miracle Sealants Product Recommendation Chart forspecific product recommendations.StorageStore Liquid Poultice (Bottle A) and Activator (Bottle B) upright in theiroriginal containers, properly sealed and unmixed. Stored at 770 F (400 C),Liquid Poultice will have a shelf life of 12 months. Do not allow to freeze. Technical SupportFor additional technical support, contact Miracle Sealants Company at1-800-350-1901 or 626-443-6433 ext. 3013Office HoursMonday - Friday from 8:30 am - 5:00 pm PT.1-626-443-6433 or 1-800-350-1901 • Fax: 1-626-443-1435website: www.miraclesealants.comProduct Damaged During TransportationIf product is damaged during transportation contact Info Trac @ 1-800-535-5053Additional ProductsMiracle Sealants Company offers a complete line of water & stain repellents, sealers, cleaner, polishing compounds, diamond abrasives,machinery and accessories for the tile, stone, concrete, metal, fabric andcarpet professional or do-it yourself specialist.CautionLiquid Poultice is an alkaline liquid. Store in cool area. Only use this prod-uct in a well ventilated area. Good ventilation means that fresh air is flowingin such a way as to feel a slight breeze. Continue to ventilate until odors arecompletely eliminated. Avoid contact with skin. Chemical resistant glovesshould be worn at all times. Keep small children and pets out of area untilproduct or surfaces has thoroughly dried. Refer to the MSDS for additionalinformation.WarrantyInstructions are a condensed guide and should not be considered com-plete. In the event of failure, the only obligation of Miracle SealantsCompany shall be to replace such products proven to be defective. Beforeusing, user shall determine the suitability of the product for their intendeduse. User assumes all risks and liability whatsoever in connection therein.Neither seller nor manufacturer shall be liable for any injury or inability touse this product.


Liquid Poultice Part BDeep Cleaning Solution

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: Name: Liquid Poultice (B)


Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS # OSHA PEL ACGIH TLVInhibine 7722-84-1 1 ppm 1 ppmVOC : < 10 g/L

Section 3 - Physical/Chemical CharacteristicsBoiling point: 2120F Specific gravity: 1.027Vapor pressure (Mmhg): Not tested Melting point: Not testedVapor density: Not tested Evaporation rate: Not testedSolubility in water: 100%

Appearance and odor: Colorless, odorless.

Section 4 - Fire And Explosion Hazard DataFlash Point: None Flammable Limits: Not testedLEL: Not tested UEL: Not testedPH: 1.8 — 2.2 DOT#: None

NFPA hazard rating - H F R S and larger (0-Least, 4-Extreme): 2 0 1 0Extinguishing media: None Special fire fighting procedures: If leaking wear full protective clothing during fire as well as a niosh approved respirator.Unusual fire and explosion hazards: None

Section 5 - Reactivity DataStability: StableConditions to avoid: NoneIncompatible materials to avoid: Organic materials, excessive heat, metals,reducing agents.

Hazardous decomposition or byproducts: CO, CO2, hydrogen.

Hazardous polymerization: None



Note: All chemicals incorporated into this product can be found on theTSCA inventory list.

Signs and Symptoms of Over Exposure:Eyes: Burning SensationSkin: Dryness, Irritation, Whitening of The SkinIngestion: Nausea, Burning IrritationInhalation: Irritation

Medical conditions generally aggravated by exposureSame as signs and symptoms of exposure.

Emergency and First Aid Procedures:Eyes: Flush with water for 15 minutes. If irritation persists, call physician.Skin: Wash off with soap and water. If irritation persists, call physician.Ingestion: Drink large amounts of water. Call physician.Inhalation: Remove to fresh air.

Section 7 - Precautions for Safe Handling and UseSteps to be taken in case material is released or spilled: Soak up with inert, absorbent material. Scoop up and place in a proper waste disposalcontainer.





Ventilation:Local exhaust - If available Special - noneMechanical - If available Other - none










www.miraclesealants.comStone Cleaner Preserver

03_2

003

No Rinse Conditioning Cleaner For

Non-polished, honed, textured and polished surfaces including:■ Marble ■ Limestone ■ Granite■ Terrazzo ■ All Natural Stone ■ Travertine

Special Features■ No Rinse ■ Easy to Use ■ Protect the Polish■ Water Base ■ Environmentally Friendly ■ Breathable■ Concentrated ■ Inexpensive ■ Interior Only■ Buffable


KEEP OUT OF REACH OF CHILDREN. Stone Cleaner Preserver is a unique,NO RINSE, concentrated, cleaner that nourishes all natural stone. StoneCleaner Preserver cleans gently without the use of harsh chemical, bleach-es or acids. Stone Cleaner Preserver is safe for daily use on all types of nat-ural stone including polished stone surfaces. Easy to use Stone CleanerPreserver may be buffed with a polishing brush or pad after it has dried toenhance the finish.

Sample Testing

Due to the differences of each material, several inconspicuous test patchesshould be completed to assure maximum performance. User must deter-mine suitability of the product for their intended use.


Always protect neighboring surfaces including wood, carpet, metal, land-scaping and other non masonry surfaces.

Surface Preparation

Surface must be dry and free of contaminant, including previously appliedsealers & waxes, lime, hard water deposits, efflorescence, rust and othervery heavy grime. To remove existing sealers and waxes use Mira Strip orH2O Strip per specification.


To protect cleaned area from future soiling and staining and increase staticcoefficient of friction, we recommend applying the appropriate MiraclePenetrating Sealer/Impregnator, before initial application of StoneCleaner Preserver.



Always dry dust mop or sweep the surface to be cleaned before applyingStone Cleaner Preserver. Mix 1-3 ounces of Stone Cleaner Preserver to 1gallon of clean water. Use a clean mop and damp mop to the surface. Re-wet and wring out the mop frequently. When the solution becomes dirty orcloudy, replace it. Cover the entire surface area with the mop. DO NOT RE-MOP OR RINSE as it will remove the protective film. Once the StoneCleaner Preserver has dried (1-2 hours) it may be buffed.

Alternate Stone Cleaner Preserver with Stone Polish Preserver every otherday.

Polish Enhancement

Periodically use Mira Dust, Marble Conditioner, Mira Brite, Mira Pad orGranite Brite as directed.

Coverage

Coverage will vary depending on density, porosity, texture, surface absorp-tion, weather, time solution left on surface and application methods. Usedas directed, Stone Cleaner Preserver will clean approximately 25,000 -35,000 square feet per gallon (1800 - 2700 square meters per 3.785 litters).

MAINTENANCE

Periodically, buff surface with Mira Dust, Marble Conditioner, Mira Brite,Granite Brite or Mira Pad as directed. For ongoing maintenance instruc-tions please refer to Miracle Sealants Care Guide. Refer to the MiracleSealants Product Recommendation Chart for specific product recommen-dations.

Storage

Store Stone Cleaner Preserver in the original container upright, properlysealed and unmixed. Stored at 770 F (400 C), Stone Cleaner Preserver willhave a shelf life of 12 months. Do not allow to freeze.

Technical Support

For additional technical support, contact Miracle Sealants Company at1-800-350-1901 or 626-443-6433 ext. 3013

Office Hours

Monday - Friday from 8:30 am - 5:00 pm PT.1-626-443-6433 or 1-800-350-1901 • Fax: 1-626-443-1435website: www.miraclesealants.com

Product Damaged During Transportation

If product is damaged during transportation contact Info Trac @ 1-800-535-5053

Additional Products

Miracle Sealants Company offers a complete line of water & stain repel-lents, sealers, cleaner, polishing compounds, diamond abrasives, machin-ery and accessories for the tile, stone, concrete, metal, fabric and carpetprofessional or do-it yourself specialist.

Caution

Use in a well ventilated area. Chemical resistant gloves should be worn atall times. Avoid prolonged contact with skin. Do not take internally. Keepsmall children and pets out of area until product or surface has thoroughlydried. Refer to the MSDS for additional information.

Warranty

Instructions are a condensed guide and should not be considered com-plete. In the event of failure, the only obligation of Miracle SealantsCompany shall be to replace such products proven to be defective. Beforeusing, user shall determine the suitability of the product for their intendeduse. User assumes all risks and liability whatsoever in connection therein.Neither seller nor manufacturer shall be liable for any injury or inability touse this product.


Stone Cleaner Preserver

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: Name: Stone Cleaner Preserver


Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS# OSHA PEL ACGIH TLVNone None None NoneVOC: < 10 g/L


Appearance and odor: Amber, citrus odor

Section 4 - Fire And Explosion Hazard DataFlash point: None Flammable limits: NoneLEL: None UEL: NonePH: 9.0 - 10.5 DOT#: None

NFPA hazard rating - H F R S And Larger (0-Least, 4-Extreme): 0 0 0 0Extinguishing media: NoneSpecial fire fighting procedures: None

Section 5 - Reactivity DataStability: StableConditions to avoid: NoneIncompatible materials to avoid: Strong oxidizersHazardous decomposition or byproducts: CO, CO2Hazardous polymerization: None


Health hazards - same as signs and symptoms of exposure.



Signs and Symptoms of Over Exposure:Eyes: Burning irritationSkin: Not expected to be a problemIngestion: NauseaInhalation: Not expected to be a problem

Medical conditions generally aggravated by exposure - same as signs andsymptoms of over exposure.






Section 7 - Precautions for Safe Handling and UseSteps to be taken in case material is released or spilled: Soak up with inert,absorbent material. Scoop up and place in a proper waste disposal contain-er.











Toxic Substances Control Act (TSCA): This product and/or all the ingredients contained in this product have been registered under theToxic Substances Control Act.




www.miraclesealants.comResidue Remover

03_2

003

Ready to Use Solvent-Base Impregnator Remover For■ Granite ■ Marble ■ Natural Stone■ Ceramic Tile ■ Porcelain Tile ■ Grout■ Concrete

Special Features■ Easy to Use■ Removes Residue Left Behind with Solvent-Base Impregnators andPenetrating Sealers■ Safe for All Stone & Tile Surfaces ■ Non Acid


KEEP OUT OF REACH OF CHILDREN. Miracle Impregnator ResidueRemover Is a unique, solvent-base formula designed to remove the silicone/fluoropolymer residue common with solvent-base impregnatorsand penetrating sealers. Residue Remover is safe for use on granite, marble, limestone, natural stone, ceramic tile, porcelain tile, grout and concrete surfaces.

Sample Testing Due to the differences of each substrate, several inconspicuous test patches should be completed to assure maximum performance. User mustdetermine the suitability of the product for their intended use.

Protect Neighboring SurfacesAlways protect neighboring surfaces including wood, carpet, metal, land-scaping and other non-masonry surfaces.


Read entire label and PDS/MSDS completely before using this product.

Apply Residue Remover direct from the bottle to a terry cloth towel or cloth.Make sure and wet the towel liberally. Apply the Residue Remover directlymaking sure to wet the surface to the eye. Allow the Residue Remover to siton the surface for 2 - 5 minutes and remove with a clean, dry terry clothtowel. Buff dry until all of the residue is removed. Do not allow the ResidueRemover to air dry on the surface. If the surface dries or becomes tacky,more Residue Remover must be applied and then removed before it can airdry.

Heavy Duty Cleaning: Use Pre-Cast Concrete Cleaner, GCFR, Quarry Kleenand Liquid Poultice as directed.

Light Cleaning: Use Mira Clean #1, Porcelain & Ceramic Tile Cleaner, Tile& Grout Cleaner, Mira Soap, Stone Cleaner Preserver or Counter Kleen asdirected.

MAINTENANCE


Cure TimeDo not allow the Residue Remover to dry on the surface. Typically waiting 2 - 5 minutes is all that is necessary. If it becomes dry or tacky, wet the surface again and immediately, buff dry.






CoverageCoverage will vary depending on density, porosity, texture, surface absorp-tion, weather, time solution is left on the surface and application methods.Used as directed, Residue Remover will cover approximately 2,000 squarefeet per gallon (199 square meters per 3.785 liters).

StorageStore Residue Remover in the original container upright and properlysealed to avoid contamination and evaporation. When store in the uprightposition at 770 F (400 C), Residue Remover will have a shelf life of 12months. Do not allow to freeze.

Technical SupportFor additional technical support, contact Miracle Sealants Company at1-800-350-1901 or 626-443-6433 ext. 3013.

Office HoursMonday – Friday from 8:30 am – 5:00 pm PT.1-626-443-6433 or 1-800-350-1901 • Fax: 1-626-443-1435website: www.miraclesealants.com

TransportationIf product is damaged during transportation contact Info Trac @ 1-800-535-5053

CautionResidue Remover contains combustible petroleum distillates. All solventsmust be considered toxic and must be used in a well-ventilated area. Goodventilation means that fresh air is flowing in such a way as to feel a slightbreeze. Open windows and use fans to circulate air. Continue to ventilateuntil vapors are eliminated. Exposure to high vapor concentration must beavoided. Inhaling the vapors can be harmful. Keep away from heat andopen flames. Avoid prolonged contact with skin. Chemical resistant glovesshould be worn at all times. Keep small children and pets out of the areauntil product or surface has thoroughly dried. Refer to the MSDS for addi-tional information.

WarrantyInstructions are a condensed guide and should not be considered com-plete. In the event of failure, the only obligation of Miracle SealantsCompany shall be to replace such products proven defective. Before using,user shall determine the suitability of the product for their intended use.User assumes all risks and liability whatsoever in connection therein.Neither seller nor manufacturer shall be liable for any injury or inability touse this product.

Additional ProductsMiracle Sealants Company offers a complete line of water & stain repellents, sealers, cleaners, polishing compounds, diamond abrasives,machinery and accessories for the tile, stone, concrete, metal, fabric andcarpet professional or do-it-yourself specialist.


Residue Remover

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: Name: Residue RemoverSection 1Manufacturers Name: Miracle Sealants CompanyAddress: 12318 Lower Azusa RoadEmergency Phone: 800-350-1901City: ArcadiaState: CAPhone: 626-443-6433Date Prepared: 04-01-2003Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS # OSHA PEL ACGIH TLVAliphatic Hydrocarbon 8052-41-3 500 ppm 100 ppmVOC Content: 772 g/LSection 3 - Physical/Chemical CharacteristicsBoiling point: 300 - 4000 F @ 760 mm HgVapor pressure (680F): 200 mm Hg Vapor density (Air=1): 4.90Liquid density: 6.440 lbs/gal @ 600 F Percent volatile: 100%State: LiquidPhysical form: Homogeneous solutionAppearance: No dataColor and odor: Amber/clear, saybolt color 30 min., Specific gravity (600 F): .772 pH: NeutralVOC exempt components: 100% (Water & solids)Evaporation rate (Ethyl Ether): 70.0Section 4 - Fire and Explosion Hazard DataFlash point: (TCC) 1050 FExplosive limit: Lower 1.0 - Upper 6.0LEL: N/D UEL: N/D DOT#: NoneNFPA Hazard rating - H F R S (0-Least, 4-Extreme): 0 2 0 0Extinguishing media: Regular foam, carbon dioxide, dry chemical.Hazardous products of combustion: May form carbon dioxide and carbonmonoxide, various hydrocarbons.Fire and explosion hazards: Vapors are heavier than air and may travelalong the ground or be moved by ventilation and ignited by heat, pilotlights, other flames and ignition sources at locations distant from the mate-rial handling point. Never use welding or cutting torch on or near drum(even empty) because product (even in residue) can ignite explosively.Fire fighting procedures: Wear a self-contained breathing apparatus withfull face piece operated in the positive pressure demand mode with appro-priate turn-out gear and chemical resistant personal protective equipment.Refer to the personal protective equipment section of the MSDS.Autoignition temperature: No dataSection 5 - Reactivity DataStability: StableIncompatible materials to avoid: Strong oxidizing agents.Hazardous polymerization: Will not occurHazardous decomposition or by-products: May form carbon dioxide andcarbon monoxide, various hydrocarbons.Section 6 - Health Hazard DataRoutes of entry:Inhalation - Possible Skin - PossibleEyes - Possible Ingestion - PossibleHealth Hazards - Same as signs & symptoms of over exposureCarcinogenicity: NTP - No; IARC Monograph - No; OSHA regulated - NoSigns & Symptoms of Over Exposure:Eyes: May cause mild eye irritation. Symptoms include stinging, tearing andredness.Skin: May cause mild skin irritation. Prolonged or repeated contact may drythe skin. Symptoms may include redness, burning, drying and cracking ofthe skin, and skin burns. Passage of this material into the body through theskin is possible, but it is unlikely that this would result in harmful effectsduring safe handling and use.Swallowing: Swallowing small amounts of this material during normal han-dling is not likely to cause harmful effects. Swallowing large amounts maybe harmful. This material can get into the lungs during swallowing or vomit-ing. This results in lung inflammation or other lung injury.Inhalation: Breathing of vapor or mist is possible. Breathing small amountsof this material during normal handling is not likely to cause harmfuleffects. Breathing large amounts may be harmful. Symptoms usually occurat air concentrations higher than the recommended exposure limits (seesection 8).

Symptoms of exposure: Signs and symptoms of exposure to this materialthrough breathing, swallowing, and/or passage of the material through theskin may include: Stomach or intestinal upset (nausea, vomiting, diarrhea)irritation (nose, throat, airways), central nervous system depression (dizzi-ness, drowsiness, weakness, fatigue, nausea, headache, unconsciousness).Target organ effects: No dataDevelopmental information: No dataOther health effects: No dataEmergency and First Aid Procedures:Eyes: If symptoms develop, move individual away from exposure and intofresh air. Flush eyes gently with water while holding eyelids apart. If symp-toms persist, contact physician.Skin: Remove contaminated clothing. Wash exposed area with soap andwater. If symptoms persist, contact physician. Launder clothing beforereuse.Inhalation: Seek medical attention. If individual is drowsy or unconscious,do not give anything by mouth; place individual on the left side with thehead down. Contact a physician, medical facility or poison control center foradvice about whether to induce vomiting, If possible, do not leave individ-ual unattended.Ingestion: If symptoms develop, immediately move individual away fromexposure and into fresh air. Seek immediate medical attention: keep personwarm and quiet. If person is not breathing, begin artificial respiration, Ifbreathing is difficult, administer oxygen.Section 7 - Precautions for Safe Handling and UseSteps to be taken in case material is released or spilled: observe precau-tions from other sections. Collect any spills with absorbent material such asvermiculite, place collected material in a polyethylene lined metal containerand seal. Clean up residue with water.Waste disposal method: dispose of in accordance with federal, state, andlocal regulations.Storage and handling information: keep from freezing. Store in a cool darkplace. Keep container dry and tightly closed when not in use. KEEP OUT OF REACH OF CHILDREN. Section 8 - Control MeasuresRespiratory protection: Ventilate by opening all doors and windows. If exposure above the TLV or PEL require a niosh approved respiratorequipped for the exposure or suitable respiratory protection per 29 CFR 1910.134 is required.Local exhaust: Recommended. Mechanical exhaust: General ventilation system should be provided.Special: None Other: NoneProtective gloves: Plastic or rubber, chemical resistant.Eye protection: Tight fitting, splash proof safety goggles.Other protective clothing or equipment: Chemical resistant clothingWork hygienic practices: Wash hands thoroughly before handling foodstuffs, liquids or tobacco products. Use common sense and care aroundchemicals. Never mix this product with other chemicals. Consult your super-visor for all other hygienic and safety practices. All practices depend onyour specific business. Directions for use normally found on label which willdictate engineering and control measures.Section 9 - Shipping & Regulatory ClassificationDOT Shipping Name: Please refer to the Bill of Lading receiving/documents

for up-to-date information.DOT Hazard Class: N/AOSHA Hazard Class: N/AUN/NA Number: N/AEPA Hazard Waste: N/ACPSC Classification: N/ATransportation Class: 55Toxic Substances Control Act (TSCA): This product and/or all the ingredients contained in this product have been registered under the Toxic Substances Control Act.NOTE: Miracle Sealants believes the data set forth are accurate. MiracleSealants makes no warranty with respects thereto and disclaims all liabilityor reliance thereon. Such data are offered solely for consideration, investi-gation and verification. Also, the data set forth is for the concentrated fin-ished product. All lab samples are for experimental purposes only and usedat the customers discretion.



www.miraclesealants.comMira Skidd

03_2

003

To Increase Traction & Daily Floor & Concrete Cleaner■ Mosaic Tile ■ Porcelain Tile ■ Ceramic Tile■ Quarry Tile ■ Concrete

Uses■ Floors ■ Restrooms ■ Showers■ Kitchens ■ Driveways/Walks ■ Pool Areas

Special Features■ Easy to Use ■ Fast■ Removes Grease Build-up ■ Increase Traction■ Leaves No Film ■ Cost Effective


Mira Skidd is a unique, heavy duty floor cleaner designed to effectivelyremove grease and soap scum from most ceramic, quarry, mosaic, porce-lain and concrete surfaces. Mira Skidd requires no special training to use.When used as directed, Mira Skidd will give added traction to the surface,helping to control slip/fall issues. When used in conjunction with the appro-priate Miracle Sealants Impregnator/Penetrating Sealer, Mira Skidd aidsin the ongoing care of greasy floor surfaces and provides for ongoing main-tenance.

Sample TestingDue to the differences of each substrate, several inconspicuous test patch-es should be completed to assure maximum performance. User mustdetermine the suitability of the product for their intended use.

Protect Neighboring SurfacesAlways protect neighboring surfaces of acid-sensitive surfaces includingwood, metal, carpet, baseboards, fabric, landscaping, etc.

DIRECTIONS

Always read the entire label, product data sheet and material data sheetbefore using.

All previous applied sealers, coatings and/or waxes must be removed usingMira Strip or H2O Strip.

Traction Application: Wipe up any spills and loose debris from the floor sur-face. Apply Mira Skidd at full strength onto the surface to be treated.Spread the product evenly using a deck brush.

Allow Mira Skidd to dwell on the surface:Quarry Tile: 20 minutesGlazed Tile: 40 minutesMosaic/Porcelain: 40 minutes

Do not allow the Mira Skidd to dry applying additional product as needed.Mop up solution from floor, squeegee down a drain or pick up using a wetvacuum. Rinse or damp mop the surface clean. Allow to dry. This processcan be completed once per month as needed.

Apply appropriate Miracle Sealants Impregnator/Penetrating Sealer asdirected.

Daily CleaningMix Mira Skidd with clean water at 1 ounce per gallon. Apply the solution tothe floor surface and aggressively scrub using a deck brush. Mop up solu-tion from floor, squeegee down drain or pick up using a wet vacuum. Rinseor damp mop the surface clean. Allow to dry.

Exterior Concrete CleaningMix Mira Skidd at 1 ounce per 4 ounces of clean water. Apply the solutionto the surface and allow to sit 3 - 5 minutes. Aggressively scrub while on thesurface with a deck brush. Rinse surface clean. Allow to dry. Apply 511Concrete Surface Treatment (CST) as directed for ongoing protection.

Auto-Scrubber CleaningMix Mira Skidd at 1 ounce per 1 gallon of clean water. Follow normal auto-scrubber techniques.

Special Notes:

Use of Mira Skidd at full strength on porcelain or glazed ceramic tile maydull the surface.

Mira Skidd is not recommended for use on marble, limestone or terrazzo.

If Mira Skidd gets on aluminum, remove it immediately with a clean, wetcloth.

Mira Skidd is for industrial/commercial use only.

Water, Stain & Slip ProtectionTreat all surfaces with Miracle Sealants Impregnator/Penetrating Sealeras directed.


CoverageCoverage will vary depending on the density, porosity, texture, surfaceabsorption, time solution left on the surface, weather and application meth-ods.

MAINTENANCE


Storage Store Mira Skidd upright in original container properly sealed and unmixed.Stored at 770 F (400 C), Mira Skidd will have a shelf life of 12 months. Do notallow to freeze.

Technical SupportFor additional technical support, contact Miracle Sealants Company at1-800-350-1901 or 626-443-6433 ext. 3013.

Office HoursMonday – Friday from 8:30 am – 5:00 pm PT.1-626-443-6433 or 1-800-350-1901 • Fax: 1-636-443-1435website: www.miraclesealants.com

Transportation DamageIf product is damaged during transportation contact Info-Trac @ 1-800-535-5053 for additional information 24 hours a day.

Additional ProductsMiracle Sealants Company offers a complete line of water and stain repel-lents, sealers, cleaners, polishing compounds, diamond abrasives, machin-ery and accessories for the tile, stone, concrete, metal, fabric and carpetprofessional or do-it-yourself specialist.

CautionUse in a well ventilated area. This product contains Doecylbenzene SulfonicAcid (CAS #27176-87-0), Sodium Xylene Sulfonate (CAS #1300-72-7),Sodium Alkyl Sulfonate (CAS #68608 – 26-4), Ammonium Bifluoride (CAS #1341-49-7) and Water (CAS #7732-18-5. KEEP OUT OF REACH OF CHIL-DREN. Avoid contact with food or beverages and risk of accidental inges-tion. Do not transfer to other bottles or containers. Protect skin and eyes. Ifexposed flush with water. Chemical resistant gloves and safety glassesshould be worn at all times. Keep small children and pets out of the areauntil product or surface has thoroughly dried. Refer to the MSDS for addi-tional safety information.



Mira Skidd

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: Name: Mira Skidd


Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS # OSHA PEL ACGIH TLVDodecylbenzene Sulfonic Acid 27176-87-0 — —Sodium Alkyl Sulfonate 68608-26-4 — —Ammonium Biflouride 1341-49-7 2.5 mg/m3 TWA 2.5 mg/m3 TWA

Fluorides, as F Fluorides, as FVOC Content: < 10 g/L

Section 3 - Physical/Chemical CharacteristicsBoiling point: N/AVapor pressure (mm Hg0: N?A Vapor density (Air=1): N/ASolubility in water: Complete Specific gravity (H20 = 1): 1.023pH: 4.4 Melting Point: N/APhysical form: LiquidEvaporation rate (Butyl Acetate = 1): N/AAppearance and odor: Orange, mild odor

Section 4 - Fire And Explosion Hazard DataFlash point: N/AFlammable limits: LEL: N/A UEL: N/A

NFPA Hazard rating - H F R S (0-Least, 4-Extreme): 1 0 0 0HMIS Hazard rating - H F R (0-Least, 4-Extreme): 1 0 0Extinguishing media: Water fog, dry chemical, CO2, foam

Special fire fighting procedures: A self-contained breathing apparatus andprotective clothing should be worn in fighting fires involving chemicals.Unusual fire and explosion hazards: Material is non-flammable & non-com-bustible.

Section 5 - Reactivity DataStability: StableConditions to avoid: Avoid mixing with other cleaning products.Incompatible materials to avoid: Avoid acid base and oxidizing agents,avoid sodium hypochlorite or bleach.Hazardous polymerization: Will not occur.Hazardous decomposition or byproducts: Mixing with incompatible materi-als may produce carbon dioxide, hydrogen and other toxic and irritatingfumes.

Section 6 - Health Hazard DataRoutes of entry:Inhalation - Possible Skin - PossibleEyes - Possible Ingestion - PossibleHealth Hazards - Same as signs & symptoms of over exposureCarcinogenicity: NTP - No; IARC Monograph - No; OSHA regulated - No

Signs & Symptoms of Over Exposure:

Eyes: May cause moderate to severe eye irritation.

Skin: Mild to severe irritation. Damage to skin and underlying tissue dam-age may result without immediate first aid treatment.

Ingestion: Harmful if swallowed. May cause abdominal pain, nausea, vomit-ing, diarrhea and severe tissue damage to digestive tract.

Inhalation: Inhalation of mists may cause irritation to nose, throat andmucous membranes.

Acute: Irritation to skin and eyes. Eye, skin and underlying tissue damagemay result without immediate first aid treatment.

Chronic: None known.

Target organs: Eyes, skin.



Skin: Remove contaminated clothing, flood with water for 15 minutes.

Inhalation: Remove to fresh air. If not breathing, give artificial respirationincluding oxygen. Call physician.

Ingestion: Do not induce vomiting. If person is conscious and can swallow,administer milk or water.



Storage and handling information: Do not store at high temperatures.Recommended storage temperature below 1000 F. Do not freeze less than orequal to 320 F.



Local exhaust: Not ordinarily needed, avoid inhalation of mists contained inthis product.

Mechanical exhaust: General ventilation system should be provided.











www.miraclesealants.comEpoxy Grout Film Remover

03_2

003

To Remove Epoxy Grout Residue From■ Ceramic Tile ■ Porcelain Tile ■ Natural Stone■ Concrete ■ Quarry TileSpecial Features■ Low Odor ■ Biodegradable■ Rinses With Water ■ Fast Acting■ No Methylene Chloride ■ Cost Effective

PRODUCT DE SCRIPTIONKEEP OUT OF REACH OF CHILDREN. Epoxy Grout Film Remover is aunique product designed for the removal of epoxy grout film from tile, con-crete and stone surfaces. It will eliminate most residue left behind after anepoxy grout has been used. In addition, Epoxy Grout Film Remover willremove a variety of epoxies, acrylic, gym finish, shellac, varnish and lacquer.Epoxy Grout Film Remover contains NO METHYLENE CHLORIDE. Theresidue and the film it has removed is miscible with water.Sample TestingDue to the differences of each material, several inconspicuous test patchesshould be completed to assure maximum performance. User must deter-mine suitability of the product for their intended use.Protect Neighboring SurfacesAlways protect neighboring surfaces including wood, carpet, metal, land-scaping and other surfaces.

APPLIC ATION INSTRUCTIONSRead entire label and PDS before using. Small Areas or Spots: Apply Epoxy Grout Film Remover to the surface witha paint brush. Try to avoid getting on the grout joint. Allow to remain on thesurface for 20 - 30 minutes and check repeatedly for softening of the curedepoxy film. Allow to remain on the surface until the epoxy film is easily loos-ened. Remove Epoxy Grout Film Remover and residual epoxy film using astiff-bristled brush (not steel wire) or coarse nylon scrubbing pad. Multipleapplications may be necessary for more difficult situations. After removingresidue, scrub the surface with a nylon pad and a solution of Mira Clean #1.Remove cleaning solution with a wet vacuum. Rinse with clean water wherenecessary and allow to dry.Large Areas: Pour directly onto the surface and spread liberally with abrush or lambs wool applicator. Work small areas approximately 3 feetwide. Avoid stepping into the solution. Allow to sit on the surface at least 15minutes and agitate with a stiff brush or pad. Begin checking for softeningof the epoxy film every 5 minutes. Allowing Epoxy Grout Film Remover todwell on the great joint too long may cause it to soften. Once the epoxy filmhas softened, remove it and the Epoxy Grout Film Remover with asqueegee, clean towels or mops. Multiple applications may be necessary.After removing residue, scrub the entire surface with a nylon brush or padand a solution of Mira Clean #1.Heavy Duty Cleaning: Use Pre-Cast Concrete Cleaner, GCFR, Quarry Kleenand Liquid Poultice as directed.Light Cleaning: Use Mira Clean #1, Porcelain & Ceramic Tile Cleaner, Tile& Grout Cleaner, Grout Cleaner, Mira Soap, Counter Kleen and StoneCleaner Preserver as directed.

Remove the cleaning solution with a wet vacuum. Rinse with clean waterwhere necessary and allow to dry.Water, Stain & Slip ProtectionTo protect cleaned area from future soiling and staining and increase staticcoefficient of friction, we recommend applying the appropriate MiraclePenetrating Sealer/Impregnator.Color and Gloss EnhancementFor added color with “Textured and Non polished” surfaces, Mira Mattemay be used. For porous type “Paver”, Saltillo & Terra Cotta Paste &Liquid Wax, Stone Polish, Stone Polish Preserver, Granite Brite, Mira Brite,Mira Dust, Marble Conditioner or Tile Brite may be used as directed.Polish EnhancementPeriodically use Mira Dust, Marble Conditioner, Mira Brite, Mira Pad orGranite Brite as directed.Anti-Slip/Increased Slip ResistanceFor quarry tile, ceramic tile or porcelain tile floors that require additional slipproperties to increase static coefficient of friction, use Mira Skidd as direct-ed.Mold, Mildew and Bacteria SanitationFor best results in killing mold, mildew, bacteria and other micro organisms,use Miracle Disinfectant as directed.CoverageCoverage will vary depending on density, porosity, texture, surface absorp-tion, weather, time solution left on surface and application methods. EpoxyGrout Film Remover will cover from 50 - 150 square feet per gallon.

MAINTENANCEFor ongoing maintenance instructions please refer to Miracle Sealants CareGuide. Refer to the Miracle Sealants Product Recommendation Chart forspecific product recommendations.StorageStore Epoxy Grout Film Remover in the original container, properly sealed.Stored at 770 F (400 C), Epoxy Grout Film Remover will have a shelf life of 12months. Do not allow to freeze.Technical SupportFor additional technical support, contact Miracle Sealants Company at1-800-350-1901 or 626-443-6433 ext. 3013Office HoursMonday - Friday from 8:30 am - 5:00 pm.1-626-443-6433 or 1-800-350-1901 • Fax: 1-626-443-1435website: www.miraclesealants.comProduct Damaged During TransportationIf product is damaged during transportation contact Info Trac @ 1-800-535-5053Additional ProductsMiracle Sealants Company offers a complete line of water & stain repel-lents, sealers, cleaner, polishing compounds, diamond abrasives, machin-ery and accessories for the tile, stone, concrete, metal, fabric and carpetprofessional or do-it yourself specialist.CautionUse in a well ventilated area. Chemical resistant gloves should be worn atall times. Skin and eye irritant. Avoid prolonged contact with skin. Avoidprolonged contact exposure to vapors. Do not take internally. Keep smallchildren and pets out of area until product or surface has thoroughly dried.Refer to the MSDS for additional information.WarrantyInstructions are a condensed guide and should not be considered com-plete. In the event of failure, the only obligation of Miracle SealantsCompany shall be to replace such products proven to be defective. Beforeusing, user shall determine the suitability of the product for their intendeduse. User assumes all risks and liability whatsoever in connection therein.Neither seller nor manufacturer shall be liable for any injury or inability touse this product.


Epoxy Grout Film Remover

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: 06523 Name: Epoxy Grout Film Remover


Section 2 - Hazardous Ingredient/Identity InformationHazardous components CAS# OSHA PEL ACGIH TLVN-Methylpyrolidone* 872-50-4 None None2-Butoxy Ethanol 111762 25 ppm 25 ppmNote - *A Sara 313 ChemicalVOC Content: 955 g/L

Section 3 - Physical/Chemical CharacteristicsBoiling point: ≤2120 F Specific gravity: .955Vapor pressure: Not tested Melting point: Not testedVapor density: Not tested Evaporation rate: Not testedSolubility in water: Miscible

Appearance and odor: Light gold, solvent odor.

Section 4 - Fire And Explosion Hazard DataFlash point: 1900 F Flammable limits: Not testedLEL: Not tested UEL: Not testedpH: 9.5 DOT#: Combustible

NFPA hazard rating - H F R S and larger (0-Least, 4-Extreme): 2 1 0 0HMIS hazard rating - H F R and larger (0-Least, 4-Extreme): 2 1 0Extinguishing media: CO2, Dry FoamSpecial fire fighting procedures: NoneUnusual fire and explosion hazards: None

Section 5 - Reactivity DataStability: StableConditions to avoid: NoneIncompatible materials to avoid: Strong oxidizersHazardous decomposition or byproducts: CO, CO2Hazardous polymerization: None




Signs and Symptoms of Over Exposure:Eyes: Burning sensationSkin: IrritantIngestion: Irritant, nauseaInhalation: Dizziness, headaches, irritation


Emergency and First Aid Procedures:Eyes: Flush with water for 15 minutes. If irritation persists, call a physician.Skin: Wash off with soap and water. If irritation persists, call a physicianIngestion: Do not induce vomiting. Call physician. Inhalation: Get person to fresh air. If unconscious, call a physician.

Section 7 - Precautions For Safe Handling And UseSteps to be taken in case material is released or spilled: Soak up with inert,absorbent material. Scoop up and place in a proper waste disposal contain-er.


Precautions to be taken in handling and storing: Store in a cool, dry place,out of direct sunlight. Do not freeze or heat above 1100 F.



Ventilation: Local exhaust - If available Special - noneMechanical - If available Other - none

Protective gloves: Plastic or rubber, chemical resistant.Eye protection: Tight fitting, splash proof safety glasses or goggles.Other protective clothing or equipment: Chemical resistant clothing.









www.miraclesealants.comMira Strip

03_2

003

Fast Acting Floor Coating/Wax Stripper ForPolished & Textured Surfaces Including:■ Marble ■ Granite ■ Limestone ■ Terrazzo■ Concrete ■ Ceramic Tile ■ Quarry Tile ■ GroutUses■ Interior & ExteriorSpecial Features■ Fast Acting ■ Easy to Use ■ Cost Effective

PRODUCT DE SCRIPTIONKEEP OUT OF REACH OF CHILDREN. Mira Strip is a fast acting, stripperdesigned to remove traditional solvent base coatings and waxes for prepa-ration of one of the 511 Miracle Penetrating Sealers and/or ColorEnhancement products. Mira Strip will effectively remove Mira Matte colorenhancer when necessary and may be effective as a cleaner for removingsome food greases, tar and other hard to remove stains from tile, grout andstone surfaces. Not for use on resin base products including polyester andepoxy agglomerates, terrazzo and grouts.Special Note: Mira Strip has a strong odor and should be used in a wellventilated area.Sample TestingDue to the differences of each material, several inconspicuous test patchesshould be completed to assure maximum performance. User must deter-mine suitability of the product for their intended use.Protect Neighboring SurfacesAlways protect neighboring surfaces including wood, carpet, metal, land-scaping and other non masonry surfaces.

APPLIC ATION INSTRUCTIONSRead entire label and PDS before using.Apply Mira Strip full strength to the surface with a clean mop. Be sure tocompletely saturate the surface being cleaned. Allow solution to sit on thesurface for 10 - 20 minutes agitating periodically with the appropriate strip-ping pad or brush. Do not allow Mira Strip to dry on the surface. Agitatearea one last time while adding more water and remove remains. Removeall Mira Strip from the surface with a wet vacuum or clean, dry towels. Morethan one application may be necessary to remove accumulated buildup.Thoroughly rinse completed area with clean water and allow to dry. Pourclean water on area being cleaned and agitate one last time before extract-ing all the dirty remains with a wet vacuum system. Note: Always allowused towels to completely dry before discarding. Once the coating and/orwax has been removed an additional deep cleaning may be necessary. Forthis procedure use the appropriate Miracle Cleaner as directed for eachsurface. (See the product chart).Heavy Duty Cleaning: To remove lime, hard water deposits, efflorescence,grout haze, rust and other heavy dirt and grime use Pre-Cast ConcreteCleaner or GCFR (Grout & Concrete Film Remover) as directed. Do not useGCFR, Pre-Cast Concrete Cleaner or Sulfamic Acid Crystals on polishedmarble, limestone on any acid sensitive stone or tile. If an additional deepcleaning is necessary use Liquid Poultice cleaner as directed. All strippersand/or cleaners should be thoroughly rinsed with clean water and thematerials allowed to dry.For a non-acid deep clean, use Liquid Poultice as directed.For quarry tile, use Quarry Kleen as directed.Light Duty Cleaning: Use Mira Clean #1, Porcelain & Ceramic Tile Cleaner,Tile & Grout Cleaner, Counter Kleen, Mira Soap or Stone Cleaner Preserveras directed.Anti-Slip/Increased Slip ResistanceFor quarry tile, ceramic tile or porcelain tile floors that require additional slip properties to increase static coefficient of friction, use Mira Skiddas directed.Mold, Mildew and Bacteria SanitationFor best results in killing mold, mildew, bacteria and other micro organisms,use Miracle Disinfectant as directed.Residue RemovalTo remove accumulated 511 Sealer residue, use Miracle Residue Removeras directed.Color & Gloss EnhancementFor color and gloss enhancement, refer to the product recommendationchart.

Water, Stain & Slip ProtectionTo protect cleaned area from future soiling and staining and increase staticcoefficient of friction, we recommend applying the appropriate MiraclePenetrating Sealer/Impregnator.CoverageCoverage will vary depending on density, porosity, texture, surface absorp-tion, weather, time solution left on surface and application methods. Usedas directed, Mira Strip will clean 200 - 300 square feet per gallon (18 - 27square meters per 3.785 liters).

MAINTENANCEFor ongoing maintenance instructions please refer to Miracle Sealants CareGuide. Refer to the Miracle Sealants Product Recommendation Chart forspecific product recommendations.StorageStore Mira Strip in the original container, properly sealed and unmixed.Stored at 770 F (400 C), Mira Strip will have a shelf life of 12 months. Do notallow to freeze.Technical SupportFor additional technical support, contact Miracle Sealants Company at1-800-350-1901 or 626-443-6433 ext. 3013Office HoursMonday - Friday from 8:30 am - 5:00 pm PT.1-626-443-6433 or 1-800-350-1901 • Fax: 1-626-443-1435website: www.miraclesealants.comProduct Damaged During TransportationIf product is damaged during transportation contact Info Trac @ 1-800-535-5053Additional ProductsMiracle Sealants Company offers a complete line of water & stain repel-lents, sealers, cleaner, polishing compounds, diamond abrasives, machin-ery and accessories for the tile, stone, concrete, metal, fabric and carpetprofessional or do-it yourself specialist.WarrantyInstructions are a condensed guide and should not be considered com-plete. In the event of failure, the only obligation of Miracle SealantsCompany shall be to replace such products proven to be defective. Beforeusing, user shall determine the suitability of the product for their intendeduse. User assumes all risks and liability whatsoever in connection therein.Neither seller nor manufacturer shall be liable for any injury or inability touse this product.CautionMira Strip contains petroleum distillate. All solvents must be consideredtoxic and must be used in a well ventilated area. Good ventilation meansthat fresh air is flowing in such a way as to feel a slight breeze. Open win-dows and use fans to circulate air. Continue to ventilate until vapors areeliminated. Exposure to high vapor concentration must be avoided. Inhalingthe vapors can be harmful. Keep away from heat and open flames. Avoidprolonged contact with skin. Chemical resistant gloves should be worn atall times. Keep small children and pets out of area until product or surfacehas thoroughly dried. Refer to the MSDS for additional information.


Mira Strip

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: Name: Mira Strip


Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS # OSHA PEL ACGIH TLVPetroleum Nephtha 64741-65-7 100ppm 100 ppmVOC: 835 g/L

Section 3 - Physical/Chemical CharacteristicsBoiling point: 2120 F Specific gravity: 0.87Vapor pressure: Not Tested Melting point: Not testedVapor density: Not Tested Evaporation rate: Not testedSolubility in water: Miscible

Appearance and odor: Amber, solvent odor.

Section 4 - Fire And Explosion Hazard DataFlash point: 1200 F Flammable limits: Not testedLEL: Not tested UEL: Not testedDOT#: None pH: Not tested

Extinguishing media: NoneSpecial fire fighting procedures: NoneNFPA hazard rating - H F R S (0-Least, 4-Extreme): 2 2 0 0Unusual fire & explosion hazards: None

Section 5 - Reactivity DataStability: StableConditions to avoid: NoneIncompatible materials to avoid: Strong oxidizers, heat and flamesHazardous polymerization: NoneHazardous decomposition products: CO2, CO

Section 6 - Health Hazard DataRoutes of Entry:Inhalation - PossibleSkin - PossibleIngestion - PossibleHealth hazards - Same as signs and symptoms of overexposure.


Signs and Symptoms of Overexposure:Eyes: Burning irritationSkin: irritationIngestion: ToxicInhalation: Dizziness, Irritation

Medical conditions aggravated: Same as signs and symptoms of overexposure.


OSHA Carcinogenicity - None; - NTP - None; - IARC Monographs - None

Emergency and First Aid Procedures:Eyes: Flush with water for fifteen minutes. If irritation persists, call a physi-cian.Skin: Wash with soap and water; if irritation persists, call a physician.Ingestion: Do not induce vomiting. Call a physician.Inhalation: Get person to fresh air. If unconscious, call a physician






Ventilation: Local exhaust - if availableMechanical - if available





DOT Hazard Class: 3OSHA Hazard Class: N/AUN/NA Number: N/AEPA Hazard Waste: N/ACPSC Classification: N/ATransportation Class: 55





www.miraclesealants.comH2O Strip

03_2

003

Coating & Wax Stripper for Most Tile & Stone Surfaces Including:■ Ceramic Tile ■ Quarry Tile ■ Saltillo■ Unglazed Ceramic Tile ■ Porcelain Tile ■ Terra Cotta■ Granite ■ Non Polished Marble ■ Flagstone■ Slate ■ Non Polished Limestone ■ Cantera■ Cement Grout & Mortar ■ Masonry ■ Brick

Special Features■ Fast Acting ■ Water Base Formula ■ Easy to Use■ Interior & Exterior ■ Less Expensive ■ Low Odor


KEEP OUT OF REACH OF CHILDREN. H2O Strip is a fast acting, high poten-cy stripper designed to remove wax, acrylic, grease and stains from tile,grout, marble, granite, concrete and masonry surfaces. H2O Strip removesMiracle Sealants’ Mira Shine & High Gloss Finish when it becomes neces-sary to strip these products. H2O Strip may also be used as an effectivecleaner. H2O Strip has a high PH and may adversely affect the polished fin-ish on marble, limestone, travertine and other calcoreous stone surfaces.




Read the entire label and PDS before starting.

Coating Removal: Apply H2O Strip directly out of the bottle using a mop orstripper applicator. Allow H2O Strip to stand for 5 - 15 minutes, agitatingthe surface periodically with a stripping pad or brush. Do not allow to dryon the surface. Multiple applications maybe necessary with difficult areas.Rinse with clean water and remove dirty remains with towels or a wet vacu-um system.

Heavy Wax Build up Removal: Use approximately 1 part concentrate H2OStrip to 12 parts clean water. Light wax build up & cleaning mix 1 part H2OStrip to 16 - 20 parts water

Special NotesDo not use on polished marble, limestone or other calcium-base surfaces.

Be careful to choose the appropriate stripping pad or brush.

Do not allow to dry on the surface.

Water, Stain & Slip ProtectionTo protect cleaned areas from future soiling, staining and increase staticcoefficient of friction, we recommend applying the appropriate MiraclePenetrating Sealer/Impregnator.




Light Cleaning: Use Mira Clean #1, Porcelain & Ceramic Tile Cleaner, Tile& Grout Cleaner, Mira Soap and Counter Kleen as directed.

CoverageCoverage will vary depending on density, porosity, texture, surface absorp-tion, weather, time solution left on surface and application methods. Usedas directed, H2O Strip will cover approximately 200 - 300 square feet pergallon (18 - 27 square meters per 3.785 liters).

MAINTENANCE


StorageStore H2O Strip in the original container, properly sealed to avoid contami-nation. Stored at 770 F (400 C), H2O Strip will have a shelf life of 12 months.Do not allow to freeze.





CautionH2O Strip contains sodium hydroxide and 2-Butoxy ethanol. Avoid contactwith eyes, mucous membranes and skin. Do not inhale or swallow. Use in awell ventilated area. Good ventilation means fresh air is flowing in such away as to feel a slight breeze. Continue to ventilate until odors are com-pletely eliminated. Inhaling odors can be harmful. Keep away from heat andopen flames. Avoid prolonged contact with skin. Keep small children andpets out of the area until products or surfaces has thoroughly dried. Referto MSDS for additional information.



H2O Strip

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: Name: H20 Strip


Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS # OSHA PEL ACGIH TLV2 (Butoxy) Ethanol 112345 25 ppm 25 ppmSodium Hydroxide 1310732 2mg/m3 2 mg/m32-Amino-Ethanol 141435 3 ppm 3 ppmVOC:86.8 g/L

Section 3 - Physical/Chemical CharacteristicsBoiling point: > 2120 F Specific gravity: 1.07Vapor pressure: Not tested Melting point: Not testedVapor density: Not tested Evaporation rate: Not testedSolubility in water: 100%

Appearance and odor: Yellow, solvent odor

Section 4 - Fire and Explosion Hazard DataFlash point: None Flammable limits: Not testedLEL: Not tested UEL: Not testedPH: 12-13 DOT#: None

NFPA hazard rating - H F R S (0-Least, 4-Extreme): 3 0 0 0Extinguishing media: NoneSpecial fire fighting procedures: NoneUnusual fire and explosion hazards: None

Section 5 - Reactivity DataStability: StableConditions to avoid: NoneIncompatible materials to avoid: Strong oxidizers, ammonia.Hazardous decomposition or byproducts: CO, CO2Hazardous polymerization: None


OSHA carcinogenicity - None NTP - None IARC monographs - None


Signs and Symptoms of Over ExposureEyes: Burning sensationSkin: IrritantIngestion: Burning irritationInhalation: Dizziness, headaches, irritation

Medical conditions generally aggravated by exposure: Same as signs andsymptoms of over exposure.

Emergency and First Aid Procedures:Eyes: Flush with water for 15 minutes. If irritation persists, call physicianSkin: Wash off with soap and water. If irritation persists, call physician.Ingestion: Drink large amounts of water. Call physician.Inhalation: Get person to fresh air. If unconscious, call a physician.

Section 7 - Precautions For Safe Handling And UseSteps to be taken in case material is released or spilled: Soak up with inertmaterial. Scoop up and place in a proper waste disposal method: Disposeof in accordance with state and local regulations.

Precautions to be taken in handling and storing: store in a cool, dry place,out of direct sunlight. D0 not freeze equal to or less than 320 F or heatabove 110o F.













www.miraclesealants.comCounter Kleen

03_2

003

Deep Cleaning Action for Polished Counters of:

■ Marble ■ Granite ■ Travertine■ Limestone ■ Ceramic Tile

Special Features

■ Removes Dirt and Grime ■ Neutral pH■ No Rinse ■ No Soap Residue■ Does not Hurt Polished Surfaces ■ For Counter Tops■ No Scrubbing ■ Easy to Use■ No Acid ■ No Abrasives■ Ready to Use


KEEP OUT OF REACH OF CHILDREN. Counter Kleen is a unique formula

designed to remove dirt and grime from polished natural stone including

marble, granite, limestone, travertine and ceramic tile counters, vanities

and furniture. Counter Kleen is easy to use, simply spray it onto the surface

and wipe away the dirt and grime with no rinsing, no streaking and no soap

residue. Counter Kleen will not harm polished natural stone or other acid

sensitive surfaces. Great for use in the kitchen. For counter surfaces only.

Sample Testing

Due to the differences of each surface, several inconspicuous test patches

should be completed to assure maximum performance. User must deter-

mine suitability of the product for their intended use.


Always protect neighboring surfaces including wood, carpet, metal, land-

scaping and other incompatible surfaces.


Read entire label and PDS/MSDS before using.

Remove all loose dirt and debris from the counter. The counter must be free

from any previously applied coatings or waxes.

Ready to use. Spray onto the counter and agitate with a towel or sponge as

needed. Wipe the counter thoroughly dry using a dry, clean towel. No rins-

ing is necessary.


To protect clean surfaces from future soiling and staining we recommend

applying the appropriate Miracle Penetrating Sealer/Impregnator.

Polish Enhancement

Use Stone Polish as directed.

Mold, Mildew and Bacteria Sanitation

For best results in killing mold, mildew, bacteria and other micro organisms,

use Miracle Disinfectant as directed.

Coverage

Coverage will vary depending on density, porosity, texture, surface absorp-

tion, weather, time solution left on the surface and application method.

Used as directed, Counter Kleen will cover approximately 500 square feet

per 32 ounce spray bottle.

MAINTENANCE

For ongoing maintenance instructions please refer to Miracle Sealants Care

Guide. Refer to the Miracle Sealants Product Recommendation Chart for

specific product recommendations.

Storage

Store Counter Kleen in the original container, properly sealed to avoid cont-

amination and evaporation. Keep in the upright position. Stored at 770 F

(400 C), Counter Kleen will have a shelf life of 12 months. Do not allow to

freeze.

Technical Support

For additional technical support, contact Miracle Sealants Company at

1-800-350-1901 or 626-443-6433 ext 3013.

Office Hours

Monday – Friday from 8:30 am – 5:00 pm PT.

1-626-443-6433 or 1-800-350-1901 • Fax: 1-626-443-1435

website: wwwmiraclesealants.com

Damage during Transportation

If product is damaged during transportation contact

Info Trac @ 1-800-535-5053.

Additional Products

Miracle Sealants Company offers a complete line of water & stain repel-

lents, sealers, cleaners, polishing compounds, diamond abrasives, machin-

ery and accessories for the tile, stone concrete, metal, fabric and carpet pro-

fessional or do-it-yourself specialist.

Caution

Use in a well ventilated area. Open windows and circulate air. Chemical

resistant gloves should be worn. Keep all children and pets out of the area

until the product or the surface has thoroughly dried.

Refer to MSDS for additional information.

Warranty

Instructions are a condensed guide and should not be considered com-

plete. In the event of failure, the only obligation of Miracle Sealants

Company shall be to replace such product proven defective. Before using,

user shall determine the suitability of the product for their intended use.

User assumes all risks and liability whatsoever in connection therein.

Neither seller nor manufacturer shall be liable for any injury or inability to

use this product.


Counter Kleen

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: Name: Counter Kleen


Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS # OSHA PEL ACGIH TLVNone None – –VOC Content: < 10 g/L

Section 3 - Physical/Chemical CharacteristicsBoiling point: > 2120FVapor pressure (680F): Not tested Vapor density (Air=1): Not testedSolubility in water: 100% Specific gravity (H20 = 1): 1.01pH: 6.5 - 8.0 Melting Point: Not testedEvaporation rate: Not testedAppearance and odor: Purple, floral odor

Section 4 - Fire and Explosion Hazard DataFlash point: None Flammable limits: Not testedLEL: None UEL: None DOT#: None

NFPA Hazard rating - H F R S (0-Least, 4-Extreme): 0 0 0 0HMIS Hazard rating - H F R (0-Least, 4-Extreme): 0 0 0Extinguishing media: NoneSpecial fire fighting procedures: NoneUnusual fire and explosion hazards: None

Section 5 - Reactivity DataStability: StableConditions to avoid: NoneIncompatible materials to avoid: Strong oxidizersHazardous polymerization: NoneHazardous decomposition or by-products: CO2, CO

Section 6 - Health Hazard DataRoutes of entry:Inhalation - Possible Skin - PossibleEyes - Possible Ingestion - PossibleHealth Hazards - Same as signs & symptoms of over exposureCarcinogenicity: NTP - No; Monograph IARC- No; OSHA regulated - No


Signs & Symptoms of Over Exposure:Eyes: Burning sensation.Skin: Not expected to be a problem.Ingestion: Nausea.Inhalation: Not expected to be a problem.



Skin: Wash thoroughly with soap and water.


Ingestion: Give a quart or more of water to drink and induce vomiting.Provide medical attention. Never administer liquid by mouth to an uncon-scious person.



Storage and handling information: Store in a cool, dry place, out of directsunlight.Do not freeze, less than or equal to 320 F or heat above 1100 F.



Local exhaust: Recommended. Mechanical exhaust: General ventilation system should be provided.




Section 9 - Shipping & Regulatory ClassificationDOT Shipping Name: Non-Hazardous Liquid, N.O.I. Please refer to the Bill of







www.miraclesealants.comSulfamic Acid Crystals

03_2

003

Cleaning Action for Most Tile & Stone Surfaces Including:■ Acid-Resistant Glazed Tile ■ Quarry Tile■ Unglazed Ceramic Tile ■ Porcelain Tile■ Flamed & Honed Granite ■ Tumbled & Honed Marble■ Cleft & Honed Slate ■ Tumbled & Honed Limestone■ Cement Grout & Mortar ■ MasonrySpecial Features■ Fast Acting ■ Easy to Use■ Interior & Exterior ■ Less Expensive

PRODUCT DE SCRIPTIONKEEP OUT OF REACH OF CHILDREN. Sulfamic Acid Crystals are a fast act-ing, mild acid cleaner for textured, non polished, natural and manufacturedsurfaces. Sulfamic Acid Crystals remove sanded grout & mortar residue,joint cement, lime & hard water deposits, efflorescence, rust and otherheavy dirt and grime. Sulfamic Acid Crystals are suitable for interior andexterior use. Sulfamic Acid Crystals will help even out uneven coloredgrout installations. Do not use on acid sensitive surfaces.Sample TestingDue to the differences of each material, several inconspicuous test patchesshould be completed to assure maximum performance. Users must deter-mine the suitability of the product for their intended use.Protect Neighboring SurfacesAlways protect neighboring surfaces including wood, carpet, metal, land-scaping and other surfaces.

APPLIC ATION INSTRUCTIONSRead the entire label and PDS before using. Allow newly grouted and concrete surfaces to cure a minimum of 7 daysprior to using. For light cleaning mix a solution of Sulfamic Acid Crystals byadding 1/2-cup to 1 gallon of clean water. For heavy duty cleaning mix 3/4-cup to 1 gallon of clean water. Mix until the crystals are completely dis-solved. In colder weather or cold water, not all of the crystals may dissolve.Use of cold water will slow the crystals dissolving. Pre-wet the surface withclean water. Apply the solution to the surface and allow to dwell for 3 - 5minutes while agitating the surface with a brush. Do not allow the solutionto dry on the surface. Work small areas. Extract all dirty remains with a wetvacuum system. Multiple applications may be necessary. After extractingSulfamic Acid Crystal solution, rinse thoroughly with clean water. Once thecleaning is complete, rinse with appropriate Mira Clean #1 mixed at 10parts 511 H2O to 1 part Miraclean. If a non acid deep cleaning in necessary, use Liquid Poultice as directed.Light Cleaning: Use Mira Clean #1, Porcelain & Ceramic Tile Cleaner, Tile& Grout Cleaner, Grout Cleaner or Mira Soap as directed.Special Notes:Do not mix with ammoniate cleaners as harmful fumes may result. Not recommended for use on very porous tile, stone or masonry.Acids, no matter how mild, may etch, lighten or alter the color of tile,cementious and natural stone surfaces. Repeated acid washing may dam-age some surfaces.Avoid contact with metals. Allow new grout, concrete, cement or masonry to cure per manufacturersspecification before using Sulfamic Acid Crystals.

Water, Stain & Slip ProtectionTo protect cleaned areas from future soiling, staining and increase staticcoefficient of friction, we recommend applying the appropriate MiraclePenetrating Sealer/Impregnator. Color and Gloss EnhancementFor added color with “Textured and Non polished” surfaces, Mira Mattemay be used. For porous type “Paver”, Saltillo & Terra Cotta Paste &Liquid Wax, Stone Polish, Stone Polish Preserver, Granite Brite, Mira Brite,Mira Dust, Marble Conditioner or Tile Brite may be used as directed.Polish EnhancementPeriodically use Mira Dust, Marble Conditioner, Mira Brite, Mira Pad orGranite Brite as directed.Anti-Slip/Increased Slip ResistanceFor quarry tile, ceramic tile or porcelain tile floors that require additional slipproperties to increase static coefficient of friction, use Mira Skidd as direct-ed.Mold, Mildew and Bacteria SanitationFor best results in killing mold, mildew, bacteria and other micro organisms,use Miracle Disinfectant as directed.Degrease Quarry TileUse Quarry Kleen as directed.CoverageCoverage will vary depending on density, porosity, texture, surface absorp-tion, weather, time solution left on surface and application methods. Usedas directed, Sulfamic Acid Crystals will cover approximately 350 - 600square feet per pound (31 - 55 square meters per .02 kilograms)

MAINTENANCEFor ongoing maintenance instructions please refer to Miracle Sealants CareGuide. Refer to the Miracle Sealants Product Recommendation Chart forspecific product recommendations.StorageStore Sulfamic Acid Crystals in the original container, properly sealed toavoid contamination or evaporation. Stored at 770 F (400 C), Sulfamic AcidCrystals will have a shelf life of 12 months. Do not allow to freeze.Technical SupportFor additional technical support, contact Miracle Sealants Company at1-800-350-1901 or 626-443-6433 ext. 3013Office HoursMonday - Friday from 8:30 am - 5:00 pm PT.1-626-443-6433 or 1-800-350-1901 • Fax: 1-626-443-1435website: www.miraclesealants.comProduct Damaged During TransportationIf product is damaged during transportation contact Info Trac @ 1-800-535-5053Additional ProductsMiracle Sealants Company offers a complete line of water & stain repel-lents, sealers, cleaners, polishing compounds, diamond abrasives, machin-ery and accessories for the tile, stone, concrete, metal, fabric and carpetprofessional or a do-it yourself specialist.CautionSulfamic Acid Crystals contain acid crystals. Keep away from eyes and skin.Do not inhale or swallow. Chemical resistant gloves and respirators shouldbe worn at all times. Use in a well-ventilated area. Good ventilation meansfresh air is flowing in such a way to feel a slight breeze. Continue to venti-late until odors are completely eliminated. Inhaling odors can be harmful.Keep away from heat and flames. Avoid prolonged contact with skin. Keepsmall children and pets out of the area until products or surfaces have thor-oughly dried. Refer to the MSDS for additional information.WarrantyInstructions are a condensed guide and should not be considered com-plete. In the event of failure, the only obligation of Miracle SealantsCompany shall be to replace such products proven to be defective. Beforeusing, users shall determine the suitability of the product for their intendeduse. Users assume all risks and liability whatsoever in connection therein.Neither seller nor manufacturer shall be liable for any injury or inability touse this product.


Sulfamic Acid Crystals

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of LaborIdentity No: Name: Sulfamic Acid Crystals


Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS# OSHA/PEL ACGIH TLVSulfamic Acid 5329-14-6 N/A N/AVOC Content: < 10 g/L

Section 3 - Physical/Chemical CharacteristicsBoiling point: > 2120 F Specific gravity: (H20 = 1) 2.126pH: .5 - 2.0 Melting Point: 2150 C to 2250 CVapor pressure (mmHg): N/A Vapor density (Air=1): N/AEvaporation rate: N/A Solubility in water: 100%Volatility/VOL (%): N/A

Appearance and odor: White crystals, acid odor

Section 4 - Fire And Explosion Hazard DataFlash point: > 2120 F Flammable limits: N/ALEL: N/A UEL: N/ADOT#: UN 1760

NFPA hazard rating - H F R S (0-Least, 4-Extreme): 2 0 0 0Extinguishing media: None

Special fire fighting procedures: None

Unusual fire and explosion hazards: None

Section 5 - Reactivity DataStability: Sulfamic acid and its aqueous solution are stable at room temper-ature. At elevated temperatures, concentrate sulfamic aqueous solutionhydrolyzed rapidly generating heat and steam.

Incompatible materials to avoid: Chlorine, potassium chlorate, nitric acid,alkaline materials, metal sulfides, nitrates and nitrites, bases and brominegas.

Hazardous polymerization: Will not occur under normal temperatures

Conditions to avoid - May accumulate in tanks and hopper cans. (mayignite combustible wood, paper, oil, etc.)

Hazardous decomposition products: Thermal decomposition products mayinclude toxic and corrosive fumes of ammonia, and toxic oxides of nitrogenand sulfur.

Section 6 - Health Hazard DataRoutes of Entry:Inhalation - May cause irritation of the mucous membrane, throat and nose.May cause chest discomfort and coughing.Ingestion - Irritant to mucous membranes and digestive tract.Skin - Irritant to skin and mucous membranes.Eyes - Severe irritation to eyes. May cause burns

Health Hazards:Chronic: Unnecessary exposure to any chemical should be avoided.Threshold limit value: N/ACarcinogenicity: N/A

Emergency and First Aid Procedures:Eyes: Flush immediately with clean, free-flowing water long enough toremove any dust particles or solution. Consult a physician if irritation per-sists.Skin: Wash thoroughly with soap and water. Consult a physician if irritationpersists.Inhalation: Remove person to fresh air. Consult a physician if symptomspersist.Ingestion: Dilute the acid immediately by drinking water or milk. If vomitingpersists, administer fluids repeatedly. Place in care of physician. SEEK MED-ICAL ATTENTION IN THE EVENT OF ANY ACCIDENTAL EXPOSURE TO THISPRODUCT.

Section 7 - Precautions For Safe Handling And UseSteps to be taken in case material is released or spilled: Collect spilled crys-tals for disposal. Avoid dispersing dusts into air. Soak up solution with acompatible absorbent material.

Waste disposal method: Dispose of in accordance with local, state and fed-eral regulations.

Storage and handling information: Special precautions to be taken in han-dling and storing: prevent from absorption of moisture and possible taking,should be stored in a cool and dry place. Do not store with cyanides, sul-fides, chlorides, hydrochloric acid or hypochlorites.


Ventilation: Provide local exhaust or general dilution ventilation system.Protective gloves: Plastic or rubber, chemical resistant.Eye protection: Tight fitting splash proof safety goggles.Other protective clothing or equipment: Chemical resistant clothing.


Section 9 - Shipping & Regulatory ClassificationDOT Shipping Name: Sulfamic Acid. Please refer to the Bill of Lading receiv-

ing/documents for up-to-date information.

Hazard Class: Class 8, CorrosivePackaging Group: 3UN Number: 2967STORE IN A COOL DRY PLACE.





www.miraclesealants.comGrout Cleaner

03_2

003

Grout & Mortar Maintenance Cleaning For■ Sanded Grout ■ Non-sanded Grout ■ Mortar Joints■ Epoxy Grout

Uses■ Interior & Exterior ■ Counters ■ Floors■ Walls ■ Showers

Special Features■ Scrub Brush Tip ■ Biodegradable■ Environmentally Safe ■ Easy to Use


KEEP OUT OF REACH OF CHILDREN. Grout Cleaner is an environmentallysafe, biodegradable, non-acidic cleaner & degreaser developed for groutand mortar maintenance. Grout Cleaner with it’s unique Scrub Brush Tipwill handle difficult stains, yet is gentle enough for everyday use. GroutCleaner is very effective as an ongoing maintenance cleaner for grout andmortar previously sealed with one of Miracle Sealants PenetratingSealers/Impregnators. Grout Cleaner will not harm the polish on polishedsurfaces.





Grout Cleaner comes complete and ready for use. Remove Scrub Brush Tipand peel away the quality control induction seal. Replace Scrub Brush Tip.Pull tip out enough to allow solution to flow. Apply Grout Cleaner directly togrout or mortar agitating periodically with the Scrub Brush Tip. Allow clean-er to sit for 5 - 10 minutes. Wipe dirty remains with a clean sponge.Thoroughly rinse the surface with hot water and a clean sponge. DO NOTallow solution to dry on the surfaces. Difficult stains may require a secondapplication. If the surface is still dirty after the second application, use anappropriate Miracle Cleaner as directed.


Light Cleaning: Use Mira Clean #1, Porcelain & Ceramic Tile Cleaner, Tile& Grout Cleaner, Mira Soap, Stone Cleaner Preserver or Counter Kleen asdirected.

Color and Gloss EnhancementTo enhance color and gloss use Mira Matte, Saltillo & Terra Cotta Paste &Liquid Wax, Mira Shine or Stone Polish as directed.

Polish EnhancementUse Marble Conditioner, Mira Dust, Granite Brite, Mira Brite, Mira Pad andTile Brite as directed.




CoverageCoverage will vary depending on density, porosity, texture, surface absorp-tion, weather, time solution left on surface and application methods. Usedas directed, Grout Cleaner will clean approximately 25 - 30 square feet per6 ounce bottle (2 - 7 square meters per 180 milliliters).

MAINTENANCE


StorageStore Grout Cleaner in the original upright container, properly sealed andunmixed. Stored at 770 F (400 C), Grout Cleaner will have a shelf life of 12months. Do not allow to freeze.





CautionGrout Cleaner is an alkaline liquid. Store in cool area. Only use this productin well ventilated areas. Good ventilation means that fresh air is flowing insuch a way to feel a slight breeze. Continue to ventilate until odors are com-pletely eliminated. Avoid contact with skin. Chemical resistant glovesshould be worn at all times. Keep small children and pets out of area untilproduct or surface has thoroughly dried. Refer to the MSDS for additionalinformation.



Grout Cleaner

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: Name: Grout Cleaner


Section 2 - Hazardous Ingredient/Identity InformationHazardous Components: NoneVOC: < 68 g/LNote: Non-carcinogenic

Section 3 - Physical/Chemical CharacteristicsBoiling point: 2100 F Specific gravity: 1.066Vapor pressure: Not tested Melting point: Not testedVapor density: Not tested Evaporation rate: Not testedSolubility in water: 100%

Appearance and odor: Amber, citrus odor

Section 4 - Fire And Explosion Hazard DataFlash point: None Flammable limits: Not testedLEL: Not tested UEL: Not testedPH: 6.5 — 7.5 DOT#: None

NFPA hazard rating - H F R S (0-Least, 4-Extreme): 0 0 0 0Extinguishing media: CO2, Dry foamSpecial fire fighting procedures: NoneUnusual fire and explosion hazards: None

Section 5 - Reactivity DataStability: StableConditions to avoid: NoneIncompatible materials to avoid: NoneHazardous decomposition byproducts: NoneHazardous polymerization: Will not occur


Health Hazards - Same as signs and symptoms of exposure.



Signs and Symptoms of Over Exposure:Eyes: Burning irritationSkin: Not expected to be a problem.Ingestion: Not expected to be a problem.Inhalation: Not expected to be a problem.

Medical conditions generally aggravated by exposure: Same as signs andsymptoms of over exposure


Eyes: Flush with water for 15 minutes. If irritation persists, call physician.



Inhalation: Remove to fresh air.











DOT Hazard Class: OSHA Hazard Class:UN/NA Number: NoneEPA Hazard Waste:CPSC Classification:Transportation Class: 55





www.miraclesealants.comGranite Brite

03_2

003

To Polish and Restore■ Granite

Uses■ Floors ■ Restrooms ■ Showers ■ Kitchens

Special Features■ Easy to Use ■ Fast ■ Effective ■ Non-Coating■ Never Yellows ■ Retains Natural Color ■ Odorless


KEEP OUT OF REACH OF CHILDREN. Granite Brite is a no-wax compoundfor the polishing of worn granite surfaces, primarily floors. Granite Britecontains only high quality abrasives. Granite Brite does not replace dia-mond grinding of granite surfaces; it is used as a part of a non-wax mainte-nance polishing system for granite surfaces.





Cover baseboard, carpet, etc., with protective plastic and/or tape. Strip thefloor (if needed) with Mira Strip or H2O Strip and a blue or brown pad. Poura small amount of the Granite Brite compound on the floor (about 2 oz. for10 sq. ft.) Add some water to the Granite Brite to make up a paste mixture.Buff the paste with a Marble Master floor machine and a“light” natural hairpad until the paste is completely gone and the granite is polished and dry.For better results, use a felt pad.

IF NEEDED: Spray Marble Conditioner on the dry granite and buff with asteel wool pad grade 0 until the granite is polished and the color is back.

Heavy Duty Cleaning: Use Pre-Cast Concrete Cleaner, GCFR or LiquidPoultice as directed.

Light Cleaning: Use Mira Clean #1, Tile & Grout Cleaner, Stone CleanerPreserver or Counter Kleen as directed.




CoverageCoverage will vary depending on density, porosity, texture, surface absorp-tion, weather, time solution left on surface and application methods. Usedas directed, Granite Brite will cover approximately 80 square feet per 1-pound container.

MAINTENANCE


StorageStore Granite Brite in the original container, properly sealed to avoid conta-mination. Stored at 770 F (400 C), Granite Brite will have a shelf life of 12months. Do not allow to freeze.





CautionUse in a well ventilated area. This product contains corrosives and must beused as directed. KEEP OUT OF REACH OF CHILDREN. Avoid contact withfood and beverages and risk of accidental ingestion. Do not transfer toother bottles or containers. Protect skin and eyes. Chemical resistant glovesshould be worn at all times. If exposed, flush with water. Keep small chil-dren and pets out of the area until product or surface has thoroughly dried.Refer to MSDS for additional information.



Granite Brite

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: Name: Granite Brite


Section 2 - Hazardous Ingredient/Identity InformationNon Hazardous Components CAS # OSHA PEL ACGIH TLVTin Oxide 18282-10-5 N/A 5 mg/m3Aluminum Oxide 1344-28-1 N/A 20 mg/m3Black Oxide 12227-84-3 N/A N/AVOC: < 10 g/L

Section 3 - Physical/Chemical CharacteristicsBoiling point: N/A Specific gravity (H2O=1) : .3 gr/mlVapor pressure (mmHg) : N/A Melting point: N/AVapor density (Air =1) : N/A Evaporation rate (Butyl Acetate = 1): N/ASolubility in water: Partial pH: N/A

Appearance and odor: Gray powder, none.

Section 4 - Fire and Explosion Hazard DataFlash point: N/A Flammable limits: N/ALEL: N/A UEL: N/ADOT#:

Extinguishing media: N/ASpecial fire fighting procedures: N/AUnusual fire and explosion hazards: N/ANFPA hazard rating - H F R S (0 - Least, 4 - Extreme): 1 0 0 0

Section 5 - Reactivity DataStability: StableConditions to avoid: N/AIncompatible materials to avoid: N/AHazardous decomposition or byproducts: N/AHazardous polymerization: Will not occur

Section 6 - Health Hazard DataRoutes of Entry:Inhalation - Dizziness/HeadacheSkin - Irritation/DryingIngestion - Nausea/Irritation

OSHA Carcinogenicity - NTP - NO IARC Monographs -

Signs & symptoms of exposure: Redness/Intestinal Pain

Medical conditions generally aggravated by exposure: Burns or lacerations

Emergency and First Aid Procedures:Eyes: Flush with plenty of water for at least 15 minutes. Call Physician.Skin: Wash with alkaline soap / flush with water.Ingestion: Do not induce vomiting/drink water/call physician.Inhalation: Remove victim from area.

Section 7 - Precautions for Safe Handling and UseSteps to be taken in case material is released or spilled: If dry, pick up. Ifwet, pick up, then flush with water.

Waste disposal method: Do not dump in drain. Put in plastic container, theneliminate in accordance to local regulation for disposal of corrosive materi-al.

Precautions to be taken in handling and storing: KEEP AWAY FROM CHIL-DREN. Keep away from foods and drinks including animal foods.

Other precautions: This product is to be used exclusively by cleaning andstone restoration professionals. Please read Granite Brite information sheetcarefully before usage.


Ventilation: Local Exhaust - Desirable Special -Mechanical - Other -

Protective gloves: Plastic or rubber, chemical resistant.Eye protection: Tight fitting splash proof safety glasses.

Other protective clothing or equipment: water proof apron & boots recom-mended.




DOT Hazard Class: N/AOSHA Hazard Class: N/AUN/NA Number: N/AEPA Hazard Waste: N/ACPSC Classification: N/ATransportation Classification: 55NMFC (Nat’l Motor Freight Classification): 33440





www.miraclesealants.comMira Brite

03_2

003

To Remove Light Scratches, Etch Marks and Restore Polish■ Marble ■ Travertine ■ Terrazzo ■ Limestone


Special Features■ Easy to Use ■ Non-Acid ■ Effective■ Non-Coating ■ Can Be Used w/Lippage ■ Never Yellows■ No Stripping ■ Cost Effective


KEEP OUT OF REACH OF CHILDREN. Mira Brite is a unique, natural, non-wax, non-acid powder compound for polishing and removing fine scratchesand etch marks in marble, travertine, limestone and terrazzo. Mira Briterequires no special training to use. When used in conjunction with MiraHone and the Mira Pad, Mira Brite can effectively be used on floors with“lippage” to remove scratches, etch marks, light weight traffic patterns andrestore the factory like polish. When used with the Mira Pad, Mira Brite isgreat for the final polish after a Pyramid Diamond restoration, or for easyongoing polish maintenance. The combination offers an effective way tomaintain the natural beauty of the stone, while providing a durable, slipresistant surface with an easy to use NON-ACID approach. Mira Brite willnot remove lippage.


Protect Neighboring SurfacesAlways protect neighboring surfaces including wood, metal, carpet, base-boards, fabric, landscaping, etc.



a. All previous applied coatings and/or waxes must be removed using MiraStrip or H2O Strip as directed.

b. Apply a small amount of water to the stone surface. Work in approxi-mately 25 - 35 square feet at a time. Do not work large areas.

c. Sprinkle a handful of Mira Brite onto the wet surface (approximately 2ounces per 10 square feet of tile).

d. Buff the Mira Brite creating a slurry with a Mira Pad. If there is no MiraPad available, a natural hair brush or white pad will be adequate.

e. Move slurry aside with a squeegee. Check for desired polish. Work longerif necessary. Move the slurry to the next section and add Mira Brite andwater as needed. DO NOT ALLOW Mira Brite TO DRY ON THE SURFACE.

f. Remove excess slurry with a wet vacuum.

g. Wet the surface and buff with a natural hair brush or pad without addingMira Brite to remove any excess.

h. Remove excess with a wet vacuum and allow to dry.

i. Buff the finished area with a dry, soft brush or pad.

Special Note: Heavily damaged areas may require the use of PyramidDiamond Abrasives or Mira Hone prior to use for maximum effectiveness.


Light Cleaning: Use Mira Clean #1, Grout Cleaner, Stone Cleaner Preserveror Counter Kleen as directed.

CoverageCoverage will vary depending on density, porosity, texture, surface absorp-tion, weather, time solution left on surface and application methods. Usedas directed, Mira Brite will cover approximately 60 - 90 square feet perpound (5 - 8 square meters).




MAINTENANCE

How often Mira Brite is used will depend on the surface and the traffic it isexposed to on a day-to-day basis. For ongoing maintenance instructionsplease refer to Miracle Sealants Care Guide. Refer to the Miracle SealantsProduct Recommendation Chart for specific product recommendations.

StorageStore Mira Brite in the original upright container, properly sealed andunmixed. Stored at 770 F (400 C), Mira Brite will have a shelf life of 12months. Do not allow to freeze.

Technical SupportFor additional technical support, contact Miracle Sealants Company at 1-800-350-1901 or 626-443-6433 ext. 3013


Product damaged during transportationIf product is damaged during transportation contact Info Trac @ 1-800-535-5053 for additional information 24 hours a day.


CautionUse in a well ventilated area. This product contains a corrosive and must beused as directed. KEEP OUT OF REACH OF CHILDREN. Avoid contact withfood or beverages and risk of accidental ingestion. Do not transfer to otherbottles or containers. Protect skin and eyes. If exposed flush with water.Chemical resistant gloves should be worn at all times. Keep small childrenand pets out of the area until product or surface has thoroughly dried. Referto MSDS for additional information.



Mira Brite

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: Name: Mira Brite


Section 2 - Hazardous Ingredient/Identity InformationNon hazardous components CAS # OSHA PEL ACGIH TLVAluminum Oxide 1344-28-1 – –VOC: < 10 g/L

Section 3 - Physical/Chemical CharacteristicsBoiling point: N/A Specific gravity (H2O = 1) : N/AVapor pressure : N/A Melting point: N/AVapor density (AIR-1) : 1 Evaporation rate (Butyl Acetate=1) :N/ASolubility in water: Non soluble pH (Wet): 8-10

Appearance and odor: White powder / None

Section 4 - Fire And Explosion Hazard DataFlash point: N/A Flammable limits: N/ALEL: N/A UEL: N/A

Extinguishing media: N/ASpecial fire fighting procedures: N/AUnusual fire and explosion hazards: N/ANFPA hazard rating - H F R S (o - least, 4 - Extreme): 1 0 0 0

Section 5 - Reactivity DataStability: StableIncompatible materials to avoid: N/AHazardous decomposition or byproducts: N/AHazardous polymerization: Will not occurConditions to avoid: N/A

Section 6 - Health Hazard DataRoutes of Entry:Inhalation - PossibleSkin - Irritation/DryingIngestion - Nausea/Irritation

Signs and symptoms of exposure: Redness/Intestinal Pain

Medical conditions generally aggravated by exposure: Burns or lacerations

OSHA Carcinogenicity - NTP - No IARC Monographs -


Inhalation: Remove victim from area.

Skin: Wash with alkaline soap. Flush with water.

Eyes: Flush with plenty of water for at least 15 minutes/call physician.

Ingestion: Do not induce vomiting/drink water/call physician.

Section 7 - Precautions for Safe Handling and UseSteps to be taken in case material is released or spilled: If dry, pick up. Ifwet, pick up, then flush with water.

Waste disposal method: Do not dump in drain. Put in plastic container, theneliminate in accordance to local regulation for disposal of abrasive material.


Store in the original container in dry place.

Other precautions: This product is to be used exclusively by cleaning andstone restoration professionals. Follow directions on the container for prop-er use of this product.


Ventilation: Local exhaust - Desirable Special - N/AMechanical - N/A Other - N/A

Protective gloves: Plastic or rubber, chemical resistant.Eye protection: Tight fitting, splash proof safety glasses.Other protective clothing or equipment: Chemical resistant clothing, waterproof apron, boots recommended.




DOT Hazard Class: N/AOSHA Hazard Class: N/AUN/NA Number: N/AEPA Hazard Waste: N/ACPSC Classification: N/ATransportation Class: 55NMFC: 33440





www.miraclesealants.comMira Dust

03_2

003

Polishing Powder For■ Marble ■ Terrazzo ■ Travertine■ Limestone ■ Other Natural Stone ■ FurnitureSpecial Features■ No Oxalic Acid ■ Easy to Use ■ Interior & Exterior■ Safe to Use ■ Fast Acting ■ Cost Effective

PRODUCT DE SCRIPTIONKEEP OUT OF REACH OF CHILDREN. Mira Dust polishing powder is aunique blend designed to enhance the natural shine of natural stone andterrazzo. Mira Dust will remove light scratches, water rings and acid etchmarks. Mira Dust is an effective means of maintaining the factory finish ofmarble, travertine, limestone, terrazzo and other natural stone surfaces.Unlike recrystallization or vitrification, Mira Dust does not change the sur-face composition of the stone. Mira Dust is an easy to use polishingprocess that has been used in stone factories and in the field for decades.Mira Dust is great for ongoing maintenance, as well as the final polishingstep in any stone restoration procedure. Heavy scratches and etch marksmay need to be honed with Pre-Dust, Mira Hone or with the PyramidDiamond Abrasive System.Sample TestingDue to the differences of each material, several inconspicuous test patches should be completed to assure maximum performance. User must determine suitability of the product for their intended use.Special Precaution & ProtectionAlways protect neighboring surfaces including wood, carpet, metal, land-scaping and other non masonry surfaces. Mira Dust should not be left onthe surface for any length of time without constant buffing action. If buffingis stopped Mira Dust must be immediately picked up to avoid burning.Place the floor or hand machine on a plastic or teflon sheet when not inuse. Mira Dust is not recommended for granite or synthetic surfaces. MiraDust can be run through a sifter for a more consistent powder.

APPLIC ATION INSTRUCTIONSRead entire label and PDS before using. All previous applied sealers, coatings and/or waxes must be removed usingMira Strip or H2O Strip as directed.Using a Marble Master 1000 (175 rpm, 150 lbs.) floor machine equippedwith a Mira Pad, white polishing pad or a tampico brush will provide opti-mum results. Wet a small area (2 - 4 sf) with clean water. Sprinkle MiraDust on the area and buff making slow, even passes side to side. Add wateror Mira Dust as needed to maintain a watery/milky slurry. DO NOT ALLOWMIRA DUST SLURRY TO DRY ON THE SURFACE. Buff the stone for 1 - 2 min-utes or until desired polish is achieved. Additional Mira Dust may be usedto increase polish. A floor squeegee may be used to move the solution tothe next small area to be polished. Be careful not to buff too long in anygiven area as this may create a burn. After polishing, rinse the stone thor-oughly with a Mira Clean #1 solution (20 - 1). Agitate with a soft brush andremove using a wet vacuum. This procedure is essential for neutralizationof the polished surface.Counters: Use a hand machine (600 - 800 rpm) equipped with a Mira Pad,white pad or tampico brush and use in the same manner as with floors.Wall: Wet the small area to be worked and sprinkle the Mira Dust directlyonto the polishing pad or brush. Buff the walls in small sections. Be carefulto protect neighboring areas from dripping of the Mira Dust solution.Small Areas: Mira Dust can be worked by hand for very small areas or trou-ble spots. Follow the same procedure as above, buffing with a small whitepad and using rubber gloves. This method can effectively remove manylight scratches, water rings and etch marks while restoring desired luster tothose very small and hard to reach areas. Heavy Duty Cleaning: Use Pre-Cast Concrete Cleaner, GCFR or LiquidPoultice as directed.Light Cleaning: Use Mira Clean #1, Stone Cleaner Preserver or CounterKleen as directed.

Water, Stain & Slip ProtectionApplication of Miracle Penetrating Sealer/Impregnator will reduce penetration of all staining materials and make the surface less slippery.Polish EnhancementPeriodically use Mira Dust, Marble Conditioner, Mira Brite, Mira Pad orGranite Brite as directed.Mold, Mildew and Bacteria SanitationFor best results in killing mold, mildew, bacteria and other micro organisms,use Miracle Disinfectant as directed.CoverageCoverage will vary depending on density, porosity, texture, surface absorp-tion, weather, time solution left on surface and application methods. Usedas directed, Mira Dust will do approximately 150 - 300 square feet (14 - 27sq. meters) per pound.

MAINTENANCEFor ongoing maintenance instructions please refer to Miracle Sealants CareGuide. Refer to the Miracle Sealants Product Recommendation Chart forspecific product recommendations.StorageStore Mira Dust in the original upright container properly sealed andunmixed. Stored at 770 F (400 C), Mira Dust will have a shelf life of 12months. Do not allow to freeze.Technical SupportFor additional technical support, contact Miracle Sealants Company at1-800-350-1901 or 626-443-6433 ext. 3013Office HoursMonday - Friday from 8:30 am - 5:00 pm PT.1-626-443-6433 or 1-800-350-1901 • Fax: 1-626-443-1435website: www.miraclesealants.comProduct Damaged During TransportationIf product is damaged during transportation contact Info Trac @ 1-800-535-5053Additional ProductsMiracle Sealants Company offers a complete line of water & stain repellents, sealers, cleaner, polishing compounds, diamond abrasives,machinery and accessories for the tile, stone, concrete, metal, fabric andcarpet professional or do-it yourself specialist.CautionUse in a well ventilated area. This product contains a mild corrosive andmust be used only as directed. KEEP OUT OF REACH OF CHILDREN. Avoidcontact with food or beverages and risk of accidental ingestion. Do nottransfer to other bottles or containers. Protect skin and eyes. If exposedflush with water. Chemical resistant gloves should be worn at all times.Keep small children and pets out of area until product or surface has thor-oughly dried. Refer to the MSDS for additional information.WarrantyInstructions are a condensed guide and should not be considered com-plete. In the event of failure, the only obligation of Miracle SealantsCompany shall be to replace such products proven to be defective. Beforeusing, user shall determine the suitability of the product for their intendeduse. User assumes all risks and liability whatsoever in connection therein.Neither seller nor manufacturer shall be liable for any injury or inability touse this product.


Mira Dust

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: Name: Mira DustSection 1Manufacturers Name: Miracle Sealants CompanyAddress: 12318 Lower Azusa RoadEmergency Phone: 800-350-1901City: ArcadiaState: CAPhone: 626-443-6433Date Prepared: 04-01-2003Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS# OSHA PEL ACGIH TLVPotassium Oxalate 6487-48-5 N/A N/AAmmonium Biflouride 1341-49-7 N/A N/AAcrylic Acid 79-10-7 10ppm N/AVOC: < 10 g/LSection 3 - Physical/Chemical CharacteristicsBoiling point: (3) 1410 C Freezing point: N/AMelting point: N/A Vapor pressure:(3) 4Vapor density: (3) 2.5 % Volatile: N/ADensity: N/A Odor threshold: N/AEvaporation rate: N/A Acid/Alkalinity: N/ASolubility in organic solvent: N/A pH: 2.3Solubility in water: (1) 25% In weight at 180 C

(2) 45.3% (3) CompletePhysical state: (1) Fine, granular, white, odorless crystals.

(2) White, transparent solid, slight acid odor(3) Colorless liquid, sharply acrid odor

Specific Gravity: (1) 2.13 (2) 1.5 (3) 1.05Section 4 - Fire And Explosion Hazard DataFlash Point: (3) 50 T.C.C. Flammable Limits: N/ALEL: 2 UEL: 8DOT#: NoneExtinguishing media: Water fog, CO2, alcohol or dry chemical.NFPA Hazard Rating - H F R S (0 - Least, 4 - Extreme) : 2 0 0 0Special fire fighting procedures: N/AUnusual fire & explosion hazard: N/ASection 5 - Reactivity DataStability: (1) and (3) Stable (2) UnstableConditions to avoid: (2) Heat and any open flameIncompatible materials to avoid: Strong oxidizers, acids and alkalis, aldehy-des, ethers and amines.Hazardous polymerization: May occur.Conditions to avoid: Excessive heat and freezingHazardous decomposition products: (2) NH3 and HF, which are corrosive.Section 6 - Health Hazard DataRoutes of Entry:Inhalation - PossibleSkin - PossibleIngestion - PossibleHealth hazards - Same as signs and symptoms of exposureOSHA Carcinogenicity - None; NTP - None; IARC Monographs - NoneSigns and Symptoms of Over Exposure:Eyes: Material is ocular irritant & may cause cornea damage. Healing is usu-ally complete if first aid measures have been promptly initiated.Skin: May cause irritation to skin.Ingestion: May cause systemic poisoning and cause severy damage to theesophagus and stomach. May cause hypocalcemia, possibly fatal.Inhalation: Irritation, may cause coughing & difficult breathing. Excessiveinhalation may cause systematic poisoning.Medical conditions generally aggravated - Hypocalcemia, liver or kidney diseases.Signs and symptoms of over exposure: Pain in throat, esophagus and stomach.

Emergency and First Aid ProceduresEyes: Promptly flush with plenty of water, lifting eyelids occasionally to facil-itate irrigation. Continue for at least 15 minutes.Skin: Wash with plenty of soap and water. Then flush with water. Removeclothing upon contamination and wash before reuse. Ingestion: Do not induce vomiting. Get prompt medical attention. Speed isessential.Inhalation: Remove victim to fresh air. If exposure to dust or mist wassevere, get medical attention.Section 7 - Precautions for Safe Handling and UseSteps to be taken in case material is released or spilled: Promptly sweep orshovel material into an empty container, avoiding dusty conditions. Labelcontainer “poison” and close for later use or disposal. Complete clean-upby flushing residue with plenty of water. Skin and eye protection should beused.Waste disposal method: If permitted by applicable disposal regulations,dispose of waste product via a secure solid waste landfill or dissolve inlarge quantity of water and discharge to sewer, stepwise if necessary.Precautions to be taken in handling and storing: store in a cool, dry place,away from food or feed product. Wash thoroughly after handling. Do notget in eyes, skin, clothing. Keep container closed. Do not ingest.Other precautions: KEEP OUT OF REACH OF CHILDREN. Follow directions onthe container for proper use of this product.

Section 8 - Control MeasuresRespiratory protection: Ventilate by opening all doors and windows. If exposure above the TLV or PEL require a niosh approved respiratorequipped for the exposure or suitable respiratory protection per 29 CFR 1910.134 is required.Protective gloves: Plastic or rubber, chemical resistant.Eye protection: Tight fitting, splash proof safety glasses.Other protective clothing or equipment: chemical resistant clothing.Work hygienic practices: Wash hands thoroughly before handling foodstuffs, liquids or tobacco products. Use common sense and care aroundchemicals. Never mix this product with other chemicals. Consult your super-visor for all other hygienic and safety practices. All practices depend onyour specific business. Directions for use normally found on label which willdictate engineering and control measures.



DOT Hazard Class:OSHA Hazard Class:UN/NA Number:Placards:EPA Hazard Waste:Transportation Class:Toxic Substances Control Act (TSCA): This product and/or all the ingredi-ents contained in this product have been registered under the ToxicSubstances Control Act.NOTE: Miracle Sealants believes the data set forth are accurate. MiracleSealants makes no warranty with respects thereto and disclaims all liabilityor reliance thereon. Such data are offered solely for consideration, investi-gation and verification. Also, the data set forth is for the concentrated fin-ished product. All lab samples are for experimental purposes only and usedat the customers discretion.



www.miraclesealants.comPre Dust

03_2

003

Pre-Polishing Powder for MarbleDesigned for environmentally safe preservation, maintenance & restorationof marble and all natural stone.

Uses■ Marble ■ Limestone ■ Terrazzo■ Travertine ■ Onyx

Special Features■ Cost Effective ■ Easy to Use■ Simple ■ Safe


KEEP OUT OF REACH OF CHILDREN. Pre Dust is a powder formulated formarble floors to remove heavy etch marks and light traffic pattern abrasionbefore polishing with Mira Dust. This product will not remove deep gougesor lippage. Pre Dust is specifically formulated to be used with Mira Dust.


Protect Neighboring SurfacesAlways protect neighboring surfaces including wood, carpet, metal, land-scaping and other non masonry surfaces. Pre Dust should not be left on thesurface for any length of time without constant buffing action. If buffing isstopped, Pre Dust must be immediately picked up to avoid burning. Placefloor or hand machine on a plastic or teflon sheet when not in use. Pre Dustis not recommended for granite or synthetic surfaces. Pre Dust can be runthrough a sifter for a more consistent powder.



All previous applied sealers, coatings and/or waxes must be removed usingMira Strip or H2O Strip as directed.

Using a Marble Master MM 1000 (175 rpm, 150 lbs) floor machine with aMira Pad, white polishing pad or tampico brush will provide optimumresults. Wet a small area (2 - 4 sf) with clean water. Sprinkle Pre Dust on thearea and buff making slow, even passes. Add water or Pre Dust as neededto maintain a watery/milky paste. Buff the stone for 1 - 2 minutes or untildesired results are achieved. Additional Pre Dust may be used as neces-sary. A floor squeegee may be used to move the solution to the next smallarea. Be careful not to buff too long in one place. After using Pre Dust, rinsethe surface thoroughly with clean water and Mira Clean #1 (20 - 1). Agitatewith a soft brush and remove using a wet vacuum.

Counters: Use a hand machine (300 - 800 rpm) equipped with a Mira Pad,nylon pad, white pad or tampico brush and use in the same manner as withfloors.

Walls: Wet the small area to be worked and sprinkle Pre Dust directly ontothe pad or brush. Buff the walls in small sections. Protect neighboring areasas directed.

Small Areas: Pre Dust can be worked by hand for very small areas or trou-ble spots. Follow the same procedure as above, buffing with a Mira Pad,nylon pad or small white pad while wearing rubber gloves. This method caneffectively remove many light scratches; water rings and etch marks in verysmall and hard to reach areas.


Light Cleaning: Use Mira Clean #1, Stone Cleaner Preserver, Porcelain &Ceramic Tile Cleaner, Mira Soap or Counter Kleen as directed.





CoverageCoverage will vary depending on the density, porosity, texture, surfaceabsorption, weather, time solution left on surface and application methods.Used as directed, Pre Dust will cover approximately 150 - 300 square feetper pound depending on condition of surface being restored.

MAINTENANCE


StorageStore Pre Dust in the original upright container, properly sealed to avoid contamination and solvent evaporation. Stored at 770 F (400 C), Pre Dustwill have a shelf life of 12 months. Do not allow to freeze.





CautionUSE THIS PRODUCT IN WELL VENTILATED AREAS. Pre Dust contains mildcorrosive and must be used as directed. Keep out of children’s reach. Avoidcontact with food or beverages and risk of accidental ingestion. Do not refillinto beverages bottles or food containers. Protect skin and eyes. Chemicalresistant gloves should be worn at all times. If exposed, flush with water.Keep small children and pets out of the area until product or surface hasthoroughly dried. Refer to the MSDS for additional information.

WarrantyInstructions are a condensed guide and should not be considered complete. In the event of failure, the only obligation of Miracle SealantsCompany shall be to replace such products proven to be defective. Beforeusing, user shall determine the suitability of the product for their intendeduse. User assumes all risks and liability whatsoever in connection therein.Neither seller nor manufacturer shall be liable for any injury or inability touse this product.


Pre Dust

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. Identity No: Name: Pre-Dust


Section 2 - Hazardous Ingredient/Identity InformationHazardous components CAS # OSHA PEL ACGIH TLVPotassium oxalate 6487-48-5 N/A —Acrylic acid 79-10-7 TWA (final) —VOC: < 10 g/L

Section 3 - Physical/Chemical CharacteristicsBoiling point: (2) 1410C Specific gravity: (1) 2.13 (2) 1.653Vapor pressure: (2) 4 Melting point: N/AVapor density (H20=2): (2) 2.5 Evaporation rate (Butyl Acetate=1): N/ASolubility in water: (1) 25% in weight at 160C (2) Complete

Appearance and Odor: (1) Fine, granular, white odorless crystals(2) Colorless liquid, Sharp acrid color

PH: 2.7

Section 4 - Fire And Explosion Hazard DataFlash Point (Method Used): (2) 50 T.C.CLEL: 2 UEL: 8 DOT#: None

NFPA hazard rating - H F R S (0-Least, 4-Extreme): 2 0 0 0

Extinguishing media: Water fog, CO2, alcohol or dry chemical.

Special fire fighting procedures: Wear self-contained NIOSH approvedbreathing apparatus to protect against formic acid, carbon monoxide, andother gasses which can be present.

Unusual fire and explosion hazards: N/A

Section 5 - Reactivity DataStability: Stable (1) & (2)Conditions to avoid: Excessive heat and freezing.Incompatibility (materials to avoid): Strong oxidizers, acids & alkalis, alde-hydes, ethers, aminee & silver.Hazardous decomposition or byproducts: N/AHazardous polymerization: May occur (2)

Section 6 - Health Hazard DataRoutes of Entry: Skin - May cause irritation.Health hazards - Acute & chronic.Eyes - Materials is ocular irritant and may cause corneal damage. Healing isusually complete if first aid measures have been promptly initiated.Inhalation - Inhalation of dust or mist is irritant & may cause coughing anddifficult breathing. Excessive inhalation may cause systemic poisoning.Ingestion - Ingestion may cause systemic poisoning & severe damage tothe esophagus & stomach. May cause hypocalcemia, possibly fatal.

OSHA Carcinogenicity - No NTP - No IARC Monographs - No

Signs and symptoms of over exposure: Pain in throat, esophagus and stomach.

Medical conditions generally aggravated by exposure: Hypocalcemia, liveror kidney disease.

Emergency and First Aid Procedures:Eyes: Flush with water for 15 minutes. If irritation persists, call physician.Skin: Wash with soap and water. If irritation persists, call physician.Ingestion: Do not induce vomiting, call physician. Speed is essential.Inhalation: get person to fresh air. If unconscious, call physician.

Section 7 - Precautions For safe Handling And UseSteps to be taken in case material is released or spilled: Promptly sweep orshovel material into empty container, avoiding dusty conditions. Label con-tainer “poison” and close for later use or disposal. Complete clean up byflushing residue with plenty of water, if permitted by applicable disposalregulation. Skin and eye protection should be provided during clean-upoperations.


Precautions to be taken in handling and storing: Store in a cool, dry place,away from food or feed product. Wash thoroughly after handling. Do notget in eyes, skin or clothing. Keep container closed.

Other precautions: Do not ingest. KEEP OUT OF REACH OF CHILDREN.


Ventilation: Natural ventilation may be adequate in absence of dust andmist.Protective gloves: Plastic or rubber, chemical resistant.Eye protection: Tight fitting, splash proof safety glasses.Other protective clothing or equipment: Chemical resistant clothing




DOT Hazard Class:OSHA Hazard Class:UN/NA Number:EPA Hazard Waste:CPSC Classification:Transportation Classification: 55





www.miraclesealants.comMira Hone

03_2

003

To Hone,Remove Light Scratches, Etch Marks in■ Marble ■ Travertine ■ Terrazzo ■ Limestone


Special Features■ Easy to Use ■ Non-Acid ■ Effective■ Non-Coating ■ Can Be Used w/Lippage ■ Never Yellows■ No Stripping ■ Cost Effective


KEEP OUT OF REACH OF CHILDREN. Mira Hone is a unique, natural, non-wax powder compound for honing and deep cleaning marble, travertine,limestone and terrazzo. Mira Hone can effectively be used on floors with“lippage” to remove scratches, etch marks, light weight traffic patterns.Mira Hone can be used to prepare the stone surface prior to using one ofthe Miracle Sealants final polishing products. The combination offers aneffective way to maintain the natural beauty of the stone, while providing adurable, slip resistant surface.

Sample Testing

Due to the differences of each material, several inconspicuous test patchesshould be completed to assure maximum performance. User must deter-mine suitability of the product for their intended use.


Always protect neighboring surfaces including wood, metal, carpet, base-boards, fabric, landscaping, etc.



a. All previous applied coatings and/or waxes must be removed using MiraStrip or H2O Strip as directed.

b. Apply a small amount of water to the stone surface. Work in approxi-mately 25 - 35 square feet at a time. Do not work large areas.

c. Sprinkle a handful of Mira Hone onto the wet surface (approximately 5ounces per 25 square feet).

d. Buff the Mira Hone with a Marble Master floor machine creating a slurrywith a natural hair brush or pad for approximately 10 minutes per 25-35square feet.

e. Move slurry aside with a squeegee. Check for desired results. Worklonger if necessary. Move the slurry to the next section and add MiraHone and water as needed. DO NOT ALLOW Mira Hone TO DRY ON THESURFACE.

f. Remove excess slurry with a wet vacuum. Damp mop and let dry.

g. For a higher polish, the surface is now prepared for one of the polishingcompounds: Marble Conditioner, Mira Dust, Mira Pad, and Mira Brite.


Light Cleaning: Use Mira Clean #1, Mira Soap, Stone Cleaner Preserver,Grout Cleaner, or Counter Kleen as directed.

Mold, Mildew and Bacteria Sanitation

For best results in killing mold, mildew, bacteria and other micro organisms,use Miracle Disinfectant as directed.

Coverage

Coverage will vary depending on density, porosity, texture, surface absorp-tion, weather, time solution left on surface and application methods. Usedas directed, Mira Hone will cover approximately 80 - 115 square feet perpound (7 - 11 square meters).


Treat all surfaces with 511 Impregnator as directed.

MAINTENANCE

How often Mira Hone is used will depend on the surface and the traffic it isexposed to on a day-to-day basis. For ongoing maintenance instructionsplease refer to Miracle Sealants Care Guide. Refer to the Miracle SealantsProduct Recommendation Chart for specific product recommendations.

Storage

Store Mira Hone in the original upright container, properly sealed andunmixed. Stored at 770 F (400 C), Mira Hone will have a shelf life of 12months. Do not allow to freeze.

Technical Support

For additional technical support, contact Miracle Sealants Company at1-800-350-1901 or 626-443-6433 ext. 3013

Office Hours

Monday - Friday from 8:30 am - 5:00 pm PT.1-626-443-6433 or 1-800-350-1901 • Fax: 1-626-443-1435website: www.miraclesealants.com

Product Damaged During Transportation

If product is damaged during transportation contact Info Trac @ 1-800-535-5053 for additional information 24 hours a day.

Additional Products

Miracle Sealants Company offers a complete line of water & stain repel-lents, sealers, cleaner, polishing compounds, diamond abrasives, machin-ery and accessories for the tile, stone, concrete, metal, fabric and carpetprofessional or do-it yourself specialist.

Caution

Use in a well ventilated area. This product contains a corrosive and must beused as directed. KEEP OUT OF REACH OF CHILDREN. Avoid contact withfood or beverages and risk of accidental ingestion. Do not transfer to otherbottles or containers. Protect skin and eyes. If exposed flush with water.Chemical resistant gloves should be worn at all times. Keep small childrenand pets out of the area until product or surface has thoroughly dried. Referto MSDS for additional information.

Warranty

Instructions are a condensed guide and should not be considered com-plete. In the event of failure, the only obligation of Miracle SealantsCompany shall be to replace such products proven to be defective. Beforeusing, user shall determine the suitability of the product for their intendeduse. User assumes all risks and liability whatsoever in connection therein.Neither seller nor manufacturer shall be liable for any injury or inability touse this product.


Mira Hone

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: Name: Mira Hone


Section 2 - Hazardous Ingredient/Identity InformationNon hazardous components CAS # OSHA PEL ACGIH TLVAluminum oxide 1344-28-1 N/A N/AVOC: < 10 g/L

Section 3 - Physical/Chemical CharacteristicsBoiling point: N/A Specific gravity (H2O=1) : N/AVapor pressure (mmHg) : N/A Melting point: N/AVapor density (AIR-1) : 1 Evaporation rate (Butyl Acetate = 1) : N/ASolubility in water: Non Soluble

Appearance and odor: White powder / nonepH (wet): 8-10


Extinguishing media: N/ASpecial fire fighting procedures: N/AUnusual fire and explosion hazards: N/ANFPA hazard rating - H F R S (0 - Least, 4 - Extreme): 1 0 0 0


Section 6 - Health Hazard DataRoutes of Entry:Inhalation - AvoidSkin - AvoidIngestion - AvoidHealth hazards (acute & chronic) - N/A

Signs and symptoms of exposure: N/A

Medical conditions generally aggravated by exposure: N/A

OSHA Carcinogenicity - NTP- No IARC Monographs -


Inhalation: Remove victim from area.

Skin: wash with alkaline soap/flush with water.

Eyes: flush with plenty of water for at least 15 minutes/call physician.

Ingestion: do not induce vomiting/drink water/call physician.

Section 7 - Precautions For Safe Handling And UseSteps to be taken in case material is released or spilled: If dry, pick up. Ifwet, pick up, then flush with water.

Waste disposal method: Do not dump in drain. Put in plastic container, theneliminate in accordance to local regulation for disposal of abrasive material.


Other precautions: This product is to be used exclusively by cleaning andstone restoration professionals. Please read mira hone™ information sheetcarefully before usage.


Ventilation: Local exhaust - Desirable special -Mechanical - other -

Protective gloves: Plastic or rubber, chemical resistant.Eye protection: Tight fitting, splash proof safety glasses.Other protective Clothing or equipment: chemical resistant clothing.




DOT Hazard Class: N/AOSHA Hazard Class: N/AUN/NA Number: N/AEPA Hazard Waste: N/ACPSC Classification: N/ATransportation Classification: 55NMFC: 33440





www.miraclesealants.comTile Restor

03_2

003

To Hone And Deep Clean Very Old and/or Worn■ Mosaic Tile ■ Porcelain Tile ■ Ceramic Tile ■ Quarry Tile


Special Features■ Easy to Use ■ Fast ■ Effective ■ Non-Coating■ Never Yellows ■ No Stripping ■ Cost Effective


KEEP OUT OF REACH OF CHILDREN. Tile Restor is a unique, natural, non-wax powder compound for cleaning and restoration of most heavily dam-aged and old ceramic, quarry, mosaic and porcelain tiles. Tile Restorrequires no special training to use. When used properly, Tile Restor pre-pares the tile surface for final polishing with Tile Brite. Used in combinationthey will give a long lasting luster, while providing a durable slip resistantsurface. After restoration, use of Tile Brite will leave a finish that will lastapproximately 3 - 5 years. Use of 511 Impregnator and Porcelain & CeramicTile Cleaner offers the most complete program available for the ongoingcare and protection of ceramic tile. The use of the Miracle Sealants Tile Careprogram eliminates stripping and waxing of tile.





a. All previous applied sealers, coatings and/or waxes must be removedusing Mira Strip or H2O Strip as directed.

b. If the grout is very dirty scrub using GCFR as directed.

c. If the floor is very dirty or old (typically 5 years or more), use Tile Restor,if not proceed directly to Tile Brite as directed.

d. Apply a small amount of water to the tile and grout surface. Work inapproximately 25 - 35 square feet at a time. Do not work large areas.

e. Sprinkle a handful of Tile Restor onto the wet surface (approximately 5ounces per 25 square feet of tile).

f. Buff the Tile Restor creating a slurry with natural hair brush or pad. (AMarble Master or similar floor machine is preferred). Approximately 10minutes per 25 - 35 square feet of tile.

g. Move slurry aside with a squeegee. Check for desired cleanliness andluster. Work longer if necessary. When the desired cleanliness and lusteris achieved, squeegee the Tile Restor slurry to the next section and addTile Restor and water as needed. DO NOT ALLOW Tile Restor TO DRY ONTHE SURFACE.

h. Remove excess slurry with a wet vacuum. Wet the surface with cleanwater and buff with the same brush or pad. DO NOT ADD MORE TileRestor. This procedure will remove any residue.

i. Vacuum dry and let air dry.

j. Polish to final luster using Tile Brite as directed.


Light Cleaning: Use Porcelain & Ceramic Tile Cleaner, Mira Clean #1, Tile& Grout Cleaner, Grout Cleaner or Counter Kleen as directed.




CoverageCoverage will vary depending on density, porosity, texture, surface absorp-tion, time solution left on surface, weather and application methods. Usedas directed, Tile Restor will cover approximately 80 - 115 square feet perpound (7 - 11 square meters).

Protect Neighboring SurfacesTreat all surfaces with 511 Impregnator as directed.

MAINTENANCE


Future RestorationUse Tile Restor and Tile Brite as directed.

StorageStore Tile Restor in the original upright container, properly sealed andunmixed. Stored at 770 F (400 C), Tile Restor will have a shelf life of 12months. Do not allow to freeze.



Product Damaged During TransportationIf product is damaged during transportation contact Info Trac @ 1-800-535-5053 for additional information 24 hours a day.





Tile Restor

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: Name: Tile Restor


Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS # OSHA PEL ACGIH TLVMagnesium Fluorosilicate Acid 18972-56-0 – –Aluminum Oxide 1344-28-1 – –VOC: < 10 g/L

Section 3 - Physical/Chemical CharacteristicsBoiling point: 2000 C Specific gravity (H2O = 1) : 2.7 gr/mlVapor pressure : N/A Melting point: N/AVapor density (AIR-1) : N/A Evaporation rate : N/ASolubility in water: Non soluble PH (wet): 4

Appearance and odor: White powder / odorless

Section 4 - Fire and Explosion Hazard DataFlash point: N/A Flammable limits: N/ALEL: N/A UEL: N/A

Extinguishing media: N/ASpecial fire fighting procedures: N/AUnusual fire and explosion hazards: Non-flammable productNFPA hazard rating - H R F S (0 - Least, 4 - Extreme): 1 0 0 0


Section 6 - Health Hazard DataRoutes of Entry:Inhalation - AvoidSkin - AvoidIngestion - Avoid

Health hazards (acute & chronic) - N/A


OSHA Carcinogenicity - NT - IARC Monographs


Eyes: Immediately flush eyes with plenty of water for at least 15 minutes,get medical attention at once.

Skin:

Inhalation: Move exposed person to fresh air. If irritation persists, get med-ical attention promptly.

Ingestion: If this product is swallowed, do not induce vomiting. If victim isconscious, give plenty of water to drink. Get medical attention at once.

Section 7 - Precautions For Safe Handling And UseSteps to be taken in case material is released or spilled: N/A

This product is not toxic nor corrosive.

Precautions to be taken in handling and storing: N/A

Waste disposal method: N/A

Other precautions:


Ventilation:

Local exhaust - Special -Mechanical - Other -

Protective gloves: Plastic or rubber, chemical resistant.Eye protection: Tight fitting splash proof safety glasses.Other protective clothing or equipment: Chemical resistant clothing, waterproof apron & boots recommended.




DOT Hazard Class: N/AOSHA Hazard Class: N/AUN/NA Number: N/AEPA Hazard Waste: N/ACPSC Classification: N/ATransportation Classification: 55NMFC : 33440





www.miraclesealants.comTile Brite

03_2

003

To Polish and Restore■ Mosaic Tile ■ Porcelain Tile ■ Ceramic Tile ■ Quarry Tile


Special Features■ Easy to Use ■ Fast ■ Effective■ Non-Coating ■ Never Yellows ■ No Stripping■ Cost Effective ■ Finish Last Up to 5 Years


KEEP OUT OF REACH OF CHILDREN. Tile Brite is a unique, natural, non-waxpowder compound for polishing and restoration of most ceramic, quarry,mosaic and porcelain tiles. Tile Brite requires no special training to use.When used properly, Tile Brite will give a long lasting luster, while providinga durable slip resistant surface. Tile Brite will not yellow. Use of Tile Britewith appropriate 511 Impregnator and Porcelain & Ceramic Tile Cleaneroffers the most complete program available for the ongoing care and pro-tection of ceramic tile. Tile Brite eliminates the need for stripping and wax-ing of tile.

Tile Brite is available in black, gray and white for the right grout color.





a. All previous applied sealers, coatings and/or waxes must be removedusing Mira Strip or H2O Strip as directed.

b. If the grout is very dirty scrub using GCFR as directed.

c. If the floor is very dirty or old (typically 5 years or more), use Tile Restorfirst as directed for optimum results.

d. Apply a small amount of water to the tile and grout surface. Work inapproximately 25 - 35 square feet at a time. Do not work large areas.

e. Sprinkle a handful of Tile Brite onto the wet surface (approximately 5ounces per 25 square feet of tile).

f. Buff the Tile Brite creating a slurry with natural hair brush or pad. (AMarble Master or similar floor machine is preferred). Approximately 20minutes per 25 - 35 square feet of tile.

g. Move slurry aside with a squeegee. Check for desired luster. Work longerfor additional luster. When the desired luster is achieved, squeegee theTile Brite slurry to the next section and add Tile Brite and water as need-ed. DO NOT ALLOW Tile Brite DRY ON THE SURFACE.

h. Remove excess slurry with a wet vacuum. Wet the surface with cleanwater and buff with the same brush pad. This procedure will remove anyresidue. DO NOT ADD MORE Tile Brite.

i. Rinse the surface with Mira Clean #1 and let area dry completely.


Light Cleaning: Use Porcelain & Ceramic Tile Cleaner, Mira Clean #1, Tile& Grout Cleaner, Grout Cleaner or Counter Kleen as directed.




CoverageCoverage will vary depending on density, porosity, texture, surface absorp-tion, weather, time solution left on surface and application methods. Usedas directed, Tile Brite will cover approximately 80 - 115 square feet perpound (7 - 11 square meters).

MAINTENANCE

The Tile Brite finish will last approximately 3 - 5 years. Use Porcelain &Ceramic Tile Cleaner as directed for ongoing cleaning. For ongoing mainte-nance instructions please refer to Miracle Sealants Care Guide. Refer to theMiracle Sealants Product Recommendation Chart for specific product rec-ommendations.

Future RestorationUse Tile Brite as directed.

StorageStore Tile Brite in the original upright container, properly sealed andunmixed. Stored at 770 F (400 C), Tile Brite will have a shelf life of 12months. Do not allow to freeze.



Product Damaged During TransportationIf product is damaged during transportation contact Info Trac @ 1-800-535-5053 for additional information 24 hours a day.





Tile Brite

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: Name: Tile Brite


Section 2 - Hazardous Ingredient/Identity InformationNon Hazardous Components CAS # OSHA PEL ACGIH TLVMagnesium Fluorosilicate Acid 18972-56-0 – –Aluminum Oxide 1344-28-1 – –VOC: < 10 g/L

Section 3 - Physical/Chemical CharacteristicsBoiling point: 2000C Specific gravity: 1 gr/cm3Vapor pressure : N/A Melting point: N/AVapor density (AIR-1) : N/A Evaporation rate( Butyl Acetate =1) : N/ASolubility in water: Partial pH (Wet) : 3

Appearance and odor: White powder / odorless


NFPA hazard rating: H F R C ( 0 - Least, 4 - Extreme): 1 0 0 0Extinguishing media: N/ASpecial fire fighting procedures: N/AUnusual fire and explosion hazards: N/A

Section 5 - Reactivity DataStability: StableIncompatible materials to avoid: N/AHazardous decomposition or byproducts: N/AHazardous polymerization: Will not occurConditions to avoid: N/A

Section 6 - Health Hazard DataRoutes of Entry:Inhalation - AvoidSkin - AvoidIngestion - AvoidEyes - Avoid

Health hazards (acute & chronic): N/A


OSHA Carcinogenicity - NTP - ARC Monographs -


Eyes: Immediately flush eyes with plenty of water for at least 15 minutes.Get medical attention at once.

Skin:

Inhalation: move exposed person to fresh air. If irritation persists, get med-ical attention promptly.

Ingestion: if this product is swallowed, do not induce vomiting. If victim isconscious, give plenty of water to drink. Get medical attention at once.

Section 7 - Precautions For Safe Handling And UseSteps to be taken in case material is released or spilled: Handle avoidingcontact with skin and eyes. This product is not toxic nor corrosive.

Waste disposal method: n/a

Precautions to be taken in handling & storing: Store in the original contain-er in a dry place.

Other precautions: This product is to be used exclusively by cleaning andstone restoration professionals. KEEP OUT OF REACH OF CHILDREN. Followdirections on the container for proper use of this product.


Ventilation: Local Exhaust - Desirable Special - N/AMechanical - General Other - N/A

Protective gloves: Plastic or rubber, chemical resistant.Eye protection: Tight fitting splash proof safety glasses.Other protective clothing or equipment: Chemical resistant clothing.




DOT Hazard Class: N/AOSHA Hazard Class: N/AUN/NA Number: N/AEPA Hazard Waste: N/ACPSC Classification: N/ATransportation Class: 55NMFC: 33440





www.miraclesealants.comPoultice Plus

03_2

003

Ready to Use Cleaner For■ Sanded Grout ■ Non-sanded Grout ■ Mortar■ Ceramic Tile ■ Quarry Tile ■ Porcelain Tile■ Clay Pavers ■ Marble ■ Limestone■ Travertine ■ Granite ■ Slate■ Other Natural Stone

Special Features■ Non Acid ■ Non Bleach ■ Fast Acting■ User Friendly ■ Environmentally Safe


KEEP OUT OF REACH OF CHILDREN. Poultice Plus is an easy to use, fine,non acidic absorption powder. Poultice Plus is effective in removing stainsthat are deep into the substrate. Poultice Plus can be effective when usedwith “distilled water” or many other chemical additives. Poultice Plus’absorptive action draws out most stains from within the substrate with littleor no effort or technical know how necessary.


Protect Neighboring SurfacesAlways protect neighboring surfaces including masonry, wood, carpet,metal, landscaping and other non masonry surfaces.



All previous applied sealers, coatings and/or waxes must be removed usingMira Strip or H2O Strip as directed.

Mix Poultice Plus with “distilled water” or appropriate chemical to form apeanut butter like paste. The paste should be pliable but not runny. Applythe paste directly to the stain approximately 1/4" - 1/2" thick. Overlap thestain by approximately 1/4"- 1/2". Cover the paste with plastic wrap andtape the plastic with “non marking” tape to create an airtight seal. Allowthe paste to dry completely, approximately 24 - 48 hours. Remove the plas-tic wrap and scrap the dried paste from the substrate with a non scratchingutensil like a wooden spoon or plastic putty knife or spatula. Rinse off allresidue with clean “distilled water”. If the stain is lighter but not completelyremoved repeat the same procedures. It may be necessary to use multipleapplications to remove some stains.

Some stains can be removed more easily by mixing the appropriate chemical with Poultice Plus. Refer to the Miracle Sealants Company StainRemoval Guide for additional information.


Light Cleaning: Use Mira Clean #1, Grout Cleaner, Tile & Grout Cleaner,Porcelain & Ceramic Tile Cleaner, Stone Cleaner Preserver, Mira Soap orCounter Kleen as directed.






CoverageCoverage will vary depending on density, porosity, texture, surface absorp-tion, weather, time solution left on surface and application methods. Usedas directed, Poultice Plus will clean approximately 5 - 10 square feet per 1 pound container.

MAINTENANCE


StorageStore Poultice Plus in the original upright container, properly sealed andunmixed. Stored at 770 F (400 C), Poultice Plus has no shelf life. Do notallow to freeze.





CautionStore in cool area. Only use this product in well ventilated areas. Good ven-tilation means that fresh air is flowing in such a way to feel a slight breeze.Continue to ventilate until odors are completely eliminated. Avoid contactwith skin. Chemical resistant gloves should be worn at all times. Keep smallchildren and pets out of area until product or surface has thoroughly dried.Refer to the MSDS for additional information.



Poultice Plus

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of Labor29 CFR 1910.1200 OMB No. 1218-0072Identity No: Name: Poultice Plus


Section 2 - Hazardous Ingredient/Identity InformationHazardous Components: NoneVOC: < 10 g/L

Section 3 - Physical/Chemical CharacteristicsBoiling point: N/A Specific gravity(H20=I): 2.35Vapor pressure: N/A Melting point: N/AVapor density: N/A Evaporation rate: N/ASolubility in water: Negligible

Appearance and odor: Off White, no odor

Section 4 - Fire And Explosion Hazard DataFlash point: N/A Flammable limits: N/ALEL: N/A UEL: N/APH: 7.2 DOT#: N/A

NFPA hazard rating - H F R S (0-Least, 4-Extreme): 0 0 0 0Extinguishing media: NoneSpecial fire fighting procedures: NoneUnusual fire and explosion hazards: None

Section 5 - Reactivity DataStability: StableConditions to avoid: No special precautions.Incompatible materials to avoid: No special precautions.Hazardous decomposition byproducts: May react with hydrofluoric acid(GCFR) to form toxic silicon tetra-flouride gas.

Hazardous polymerization: Will not occur.

Section 6 - Health Hazard DataRoutes of Entry:Inhalation - NoSkin - NoIngestion - Non-hazardousHealth Hazards - In extreme exposures, some congestion may occur..

Carcinogenicity: NTP - N/A; IARC Monographs - Vol. 68 (1997) Silica-Group 3 (Not classifiable as to carcinogenicity to humans); OSHA Regulated: No

Acute health effects: Transitory upper respiratory irritant.

Chronic health effects: Inhalation of high levels of any nuisance dust overlong periods of time may cause lungs to be more vulnerable to pncumoco-niosis (lung disease).

Signs and Symptoms of Over Exposure:Eyes: Temporary irritation & inflammationSkin: N/AIngestion: Non-hazardousInhalation: Respiratory irritation. In extreme exposures some congestionmay occur.

Medical conditions which may be aggravated: Pre-existing upper respiratory & lung disease such as, but not limited to bronchitis, emphysema & asthma.

Emergency and First Aid Procedures:Eyes: Flush with copious amounts of clean water for 15 minutes. If irritationpersists, consult a physician.Skin: Wash off with soap and water. If irritation persists, call physician.Ingestion: Drink large amounts of water. Call physician.Inhalation: Blow nose, rinse mouth, drink water to clear throat. Remove tofresh air.

Section 7 - Precautions For Safe Handling And UseSteps to be taken in case material is released or spilled: Vacuum cleanspillage. If sweeping is necessary, use a dust suppressant.

Waste disposal method: Bury as non-toxic waste in an approved landfill inaccordance with all federal, state and local regulations.

Precautions to be taken in handling and storing: Use techniques that mini-mize generating dust.

Other precautions: KEEP OUT OF REACH OF CHILDREN. Follow directions onthe container for proper use of this product. Material when wet, may beslippery on a smooth surface, use caution.


Ventilation:Local exhaust - RecommendedMechanical - Sweep or vacuum all spillsSpecial Other - Use filter equipped vacuum to remove dust; Do not blow offwith compressed air.

Protective gloves: Not required.Eye protection: Tight fitting, splash proof safety goggles.Other protective clothing or equipment: Not required.

Work hygienic practices: Avoid vigorous shaking of bags. Clean clothes withvacuum hose, not by blowing off. Wash hands thoroughly before handlingfood stuffs, liquids or tobacco products. Use common sense and carearound chemicals. Never mix this product with other chemicals. Consultyour supervisor for all other hygienic and safety practices. All practicesdepend on your specific business. Directions for use normally found onlabel which will dictate engineering and control measures.








www.miraclesealants.comWater Ring & Etch Remover

03_2

003

Polishing Powder For■ Marble ■ Terrazzo ■ Travertine■ Limestone ■ Other Natural StoneSpecial Features■ No Oxalic Acid ■ Easy to Use ■ Interior & Exterior■ Safe to Use ■ Fast Acting ■ Cost Effective

PRODUCT DE SCRIPTIONKEEP OUT OF REACH OF CHILDREN. Water Ring & Etch Remover polishingpowder is a unique blend designed to enhance the natural shine of naturalstone and terrazzo. Water Ring & Etch Remover will remove light scratches,water rings and acid etch marks. Water Ring & Etch Remover is an effectivemeans of maintaining the factory finish of marble, travertine, limestone, ter-razzo and other natural stone surfaces. Unlike recrystallization or vitrifica-tion, Water Ring & Etch Remover does not change the surface compositionof the stone. Water Ring & Etch Remover is an easy to use polishingprocess that has been used in stone factories and in the field for decades.Water Ring & Etch Remover is great for ongoing maintenance, as well asthe final polishing step in any stone restoration procedure. Heavy scratchesand etch marks may need to be honed with the Mira Hone or PyramidDiamond Abrasive System prior to using Water Ring & Etch Remover.Sample TestingDue to the differences of each material, several inconspicuous test patchesshould be completed to assure maximum performance. User must deter-mine suitability of the product for their intended use.Special Precaution & ProtectionAlways protect neighboring surfaces including masonry, wood, carpet,metal, landscaping and other non masonry surfaces.Water Ring & Etch Remover should not be left on the surface for any lengthof time without constant buffing action. If buffing is stopped Water Ring &Etch Remover must be immediately picked up to avoid burning. Place thefloor or hand machine on a plastic or teflon sheet when not in use. WaterRing & Etch Remover is not recommended for granite or synthetic surfaces.Water Ring & Etch Remover can be run through a sifter for a more consis-tent powder.

APPLIC ATION INSTRUCTIONSRead entire label and PDS before using. All previous applied sealers, coatings and/or waxes must be removed usingMira Strip or H2O Strip as directed.Using a Marble Master 1000 (175 rpm, 150 lbs.) floor machine equippedwith a Mira Pad, white polishing pad or a tampico brush will provide opti-mum results. Wet a small area (2 - 4 sf) with clean water. Sprinkle WaterRing & Etch Remover on the area and buff making slow, even passes. Addwater or Water Ring & Etch Remover as needed to maintain a watery/milkyslurry. DO NOT ALLOW Water Ring & Etch Remover SLURRY TO DRY ONTHE SURFACE. Buff the stone for 1 - 2 minutes or until desired polish isachieved. Additional Water Ring & Etch Remover may be used to increasepolish. Be careful not to buff too long in any given area as this may create aburn. After polishing, rinse the stone thoroughly with the appropriateMiracle Cleaner as directed. Agitate with a soft brush and remove using awet vacuum. This procedure is essential for neutralization of the polishedsurface.Counters: Use a hand machine (600 - 800 rpm) equipped with a Mira Pad,white pad or tampico brush and use in the same manner as with floors.Wall: Wet the small area to be worked and sprinkle the Water Ring & EtchRemover directly onto the polishing pad or brush. Buff the walls in smallsections. Be careful to protect neighboring areas from dripping of the WaterRing & Etch Remover solution.Small Areas: Water Ring & Etch Remover can be worked by hand for verysmall areas or trouble spots. Follow the same procedure as above, buffingwith a small white pad and using rubber gloves. This method can effectivelyremove many light scratches, water rings and etch marks while restoringdesired luster to those very small and hard to reach areas. Heavy Duty Cleaning: Use Pre-Cast Concrete Cleaner, GCFR or LiquidPoultice as directed.Light Cleaning: Use Mira Clean #1, Stone Cleaner Preserver or CounterKleen as directed.

Water, Stain & Slip ProtectionApplication of Miracle Penetrating Sealer/Impregnator will reduce pene-tration of all staining materials and make the surface less slippery.Color and Gloss EnhancementFor added color with “Textured and Non polished” surfaces, Mira Mattemay be used. For porous type “Paver”, Saltillo & Terra Cotta Paste &Liquid Wax, Stone Polish, Stone Polish Preserver, Granite Brite, Mira Brite,Mira Dust, Marble Conditioner or Tile Brite may be used as directed.Polish EnhancementPeriodically use Mira Dust, Marble Conditioner, Mira Brite, Mira Pad orGranite Brite as directed.Mold, Mildew and Bacteria SanitationFor best results in killing mold, mildew, bacteria and other micro organisms,use Miracle Disinfectant as directed.CoverageCoverage will vary depending on the density, porosity, texture, surfaceabsorption, weather, time solution left on surface and application methods.Used as directed, Water Ring & Etch Remover will do approximately 13 - 28sq. meters per pound or 3 - sq. meters per 4 oz. bottle.

MAINTENANCEFor ongoing maintenance instructions please refer to Miracle Sealants CareGuide. Refer to the Miracle Sealants Product Recommendation Chart forspecific product recommendations.StorageStore Water Ring & Etch Remover in the original upright container properlysealed and unmixed. Stored at 770 F (400 C), Water Ring & Etch Removerwill have a shelf life of 12 months. Do not allow to freezeTechnical SupportFor additional technical support, contact Miracle Sealants Company at1-800-350-1901 or 626-443-6433 ext. 3013Office HoursMonday - Friday from 8:30 am - 5:00 pm PT.1-626-443-6433 or 1-800-350-1901 • Fax: 1-626-443-1435website: www.miraclesealants.comProduct Damaged During TransportationIf product is damaged during transportation contact Info Trac @ 1-800-535-5053Additional ProductsMiracle Sealants Company offers a complete line of water & stain repel-lents, sealers, cleaner, polishing compounds, diamond abrasives, machin-ery and accessories for the tile, stone, concrete, metal, fabric and carpetprofessional or do-it yourself specialist.CautionUse in a well ventilated area. This product contains mild corrosive and mustbe used only as directed. KEEP OUT OF REACH OF CHILDREN. Avoid contactwith food or beverages and risk of accidental ingestion. Do not transfer toother bottles or containers. Protect skin and eyes. If exposed, wash or flushwith water. Keep small children and pets out of area until product or surfacehas thoroughly dried. For more information refer to the MSDS. WarrantyInstructions are a condensed guide and should not be considered com-plete. In the event of failure, the only obligation of Miracle SealantsCompany shall be to replace such products proven to be defective. Beforeusing, user shall determine the suitability of the product for their intendeduse. User assumes all risks and liability whatsoever in connection n therein.Neither seller nor manufacturer shall be liable for any injury or inability touse this product.


Water Ring & Etch Remover

03_2

003

Osha’s Hazard Communication StandardU.S. Department Of LaborIdentity No:Name: Water Ring & Etch Remover


Section 2 - Hazardous Ingredient/Identity InformationHazardous Components CAS# OSHA PEL ACGIH TLVPotassium Oxalate 6487-48-5 N/A N/AAmmonium Bifluoride 1341-49-7 N/A N/AAcrylic Acid 79-10-7 10ppm N/A

Section 3 - Physical/Chemical CharacteristicsBoiling point: (3) 1410 C Freezing point: N/A Melting point: Not tested Vapor pressure: (3) 4Vapor density: (3) 2.5 % Volatile: N/ADensity: N/A Odor threshold: N/AEvaporation rate: N/A Acid/Alkalinity: N/ASolubility in organic solvent: N/A PH: Unknown

Solubility in water: (1) 25% in weight at 180 C - (2) 45.3% - (3) Complete

Physical State: (1) Fine, granular, white, odorless crystals.(2) White, transparent solid. Slight acid odor.(3) Colorless liquid, Sharply acrid odor.

Specific Gravity: (1) 2.13 - (2) 1.5 - (3) 1.05

Section 4 - Fire and Explosion Hazard DataFlash point (method used): (3) 50 T.C.C. Flammable limits: N/A

LEL: 2 UEL: 8 DOT#: None

Extinguishing media: Water fog, CO2, alcohol or dry chemicalNFPA hazard rating - H F R S (0 - Least, 4 - Extreme: 2 0 0 0Special fire fighting procedures: N/AUnusual fire & explosion hazard: N/A

Section 5 - Reactivity DataStability: (1) and (3) Stable. (2) Unstable.

Conditions to avoid: (2) Heat and any open flame.

Incompatible materials to avoid: Strong oxidizers, acids and alkalis, aldehy-des, ethers and amines.

Hazardous polymerization: May occur.

Conditions to avoid: Excessive heat and freezing.

Hazardous decomposition products: (2) nh3 and hf, which are corrosive.

Section 6 - Health Hazard DataRoutes of Entry:Inhalation - Possible Skin - Possible Ingestion - Possible

Health hazards - Same as signs and symptoms of overexposure.

OSHA Carcinogenicity - None; - NTP - None; - IARC Monographs - None

Signs and Symptoms of Over Exposure:Eyes: Material is ocular irritant & may cause cornea damage. Healing is usu-ally complete if first aid measures have been promptly initiated.Skin: may cause irritation to skin.Ingestion: may cause systemic poisoning and cause severe damage to the

esophagus and stomach. May cause hypocalcemia, possibly fatal.

Inhalation: Irritation, may cause coughing & difficult breathing. Excessiveinhalation may cause systemic poisoning.

Medical conditions aggravated: Hypocalcemia, liver or kidney diseases.

Signs and symptoms of over exposure: Pain in throat, esophagus and stom-ach.

Emergency and First Aid Procedures:Eyes: Promptly flush plenty of water, lifting eyelids occasionally to facilitateirrigation. Continue for at least 15 minutes.Skin: Wash with plenty of soap and water. Then flush with water. Removeclothing upon contamination and wash before reuse.Ingestion: do not induce vomiting. Get prompt medical attention. Speed isessential.Inhalation: remove victim to fresh air. If exposure to dust or mist wassevere, get medical attention.

Section 7 - Precautions For Safe Handling And UseSteps to be taken in case material is released or spilled: Promptly sweep orshovel material into an empty container, avoiding dusty conditions. Labelcontainer “poison” & close for later use or disposal. Complete clean-up byflushing residue with plenty of water, skin and eye protection should beused.

Waste disposal method: If permitted by applicable disposal regulations,dispose of waste product via a secure solid waste landfill or dissolve inlarge quantity of water and discharge to sewer, stepwise if necessary.

Precautions to be taken in handling and storing: Store in a cool, dry place,away from food or feed products. Wash thoroughly after handling. Do notget in eyes, skin, clothing. Keep container closed. Do not ingest.



Protective gloves: Plastic or rubber chemical resistant.Eye protection: Tight fitting, splash proof safety glasses or goggles.Other protective Clothing or equipment: chemical resistant clothing.




DOT Hazard Class:OSHA Hazard Class:UN/NA Number:Placards:EPA Hazard Waste:Transportation Class:


NOTE: Miracle Sealants believes the data set forth are accurate. MiracleSealants makes no warranty with respects thereto and disclaims all liabilityor reliance thereon. Such data are offered solely for consideration, investi-gation and verification. Also, the data set forth is for the concentrated fin-ished product.All lab samples are for experimental purposes only and usedat the customers discretion.


Date post:	08-Aug-2020
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

511 Seal & Enhance - ONBOCES...Light Cleaning For light cleaning use Mira Clean #1as directed....

Documents