LED

Fix

ture

Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652

www.HowardLightingProducts.com

LED Product Partner

Specification Sheet

Project:

Catalog#:

Approved by:

Date:

Specifications subject to change without notice.

12” LED Canopy

LC12 Series

5/2/2017

LED | 20 or 40 LEDs | 6000K

Applications Ideal for residential exteriors, entry ways, walkways, perimeters, parking garages, storage areas, and industrial/commercial spaces.

DimensionsHousingOne-piece cast aluminum alloy.

LED ModuleThe LED light engine utilizes an aluminum metal clad board for maximum heat transfer, resulting in a longer life. The module consists of various orientations & arrangements allowing direction and intensity of the light to be controlled. Control of the LEDs allow Howard fixtures to maintain light levels equal to or greater than that of MH and HPS fixtures at a much lower energy consumption level and with an expected life of 108,850 hours.

LED DriverClass II constant current device is with a high-power factor correction to maximize power utilization. It meets UL 1310/UL 48 Class 2 (also available with Class 1) with a built-in over-temperature protection (>90°C). All drivers are 100% factory tested. Input volt-age ranges from 120 to 277 VAC. It passes FCC part 15, class B for both conducted and radiated emissions.

CRI/CCT70 CRI; 6000K

Mininum Starting Temperature-40°C

LensLens made of a clear single piece UV stabilized prismatic polycarbonate.

Finish/ColorFinish is polyester powder coat paint, 2.5 mil nominal thickness. The standard color is bronze. Custom colors are available. Consult factory.

InstallationFixture mounts to a recessed outlet box or can be surface mounted, or the fixture can be suspended from a 1/2” rigid conduit.

12.4"

12.4"

Distributions

A - Aisle D - Down

12.4"

12.4" 10”

.75"

Features• Up to 75% Energy Cost Reduction• Maintenance Free for 12+ Years• 100K+ Hour Life• Multiple Wattages Available• CCT - 6000K (70CRI)• Environmentally Friendly - Mercury Free• Durable Die Cast Housing• Sealed assembly (dirt and bug free)• Comparable to 50-200W HID

LIMITED QUANTITIES AVAILABLE

168

337

505

674

1

2

Maximum Candela = 673.84 Located At Horizontal Angle = 0, Vertical Angle = 6# 1 - Vertical Plane Through Horizontal Angles (0 - 180) (Through Max. Cd.)# 2 - Horizontal Cone Through Vertical Angle (6) (Through Max. Cd.)

Photometric Data

Aisle Distribution

Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652

www.HowardLightingProducts.com

LED

Fix

ture

Model Family

Lens Option

# of LEDs/Output Watts CCT Light

Distribution Input Volts Housing Color* Options Packaging Reserved for Factory Use

LC12 P 4041 60 D U B 00 I 000LED12

12” LEDCanopy

P: Prismatic Polycarbonate

2031: 20LEDs/31W

4041: 40LEDs/41W

4060: 40LEDs/60W

60: 6000K* A: AisleD: Down

U: 120-277v Electronic Driver

B: BronzeW: White

*Bronze is standard. Other colors are available, but will require minimum quantities and longer lead time. Call factory for options.

00: No Options I: Single TBA

LED Canopy Technical DataLC12P2031 LC12P4041 LC12P4060

Total System Watts (Input) 36W 46W 67W

Light Distribution D A D Initial Lumens @ 25C Ambient1 2114 @500mA 2893 @350mA 3886 @500mA

Lumens per Watt @ 25C Ambient 57 63 58 Initial Lumens @ 40C Ambient2 2045 @500mA 2801 @350mA 3762 @500mA Initial Lumens @ 50C Ambient2 2000 @500mA 2740 @350mA 3680 @500mA

Lighting Facts Labela No Yes, No

Tj @ 25C Ambientb 79 79 102Safety Marginc 36% 37% 18%

HID Photometric Equivalentd 50w MH100w HPS

70w MH 150w HPS

100w MH150w HPS

Specification Sheet

Specifications subject to change without notice.

LC12 Series5/2/2017

Project:

Catalog#:

Approved by:

Date:

12” LED CanopyLED | 20 or 40 LEDs | 6000K

Ordering Information

Sample Ordering Number:LC12 P 4041 60 A U B 00 I 000

LC12 : 12” LED CanopyP : Prismatic Polycarbonate Lens4041: 40LEDs/41W60: 6000K Color Temperature; 70 CRIU: 120-277v Electronic DriverB: Bronze Housing Color00: No OptionsI: Individual packaging000: Reserved for factory use

1. Based on average performance.2. Calculation based on Philips LumiLEDs Datasheet.a. Light facts can be seen at www.lightingfacts.com. A program of the US Department of Energy.b. Tj is the Junction Temperature of the LED; maximum 125°C for Philips Rebel LED.c. Safety margin is the percent margin at which Tj is below maximum of 125°C.d. Photometric Equivalency based upon Scotopic/Photopic ratios. See Wattage Cross Reference document for detailed information.