Date post: | 20-May-2018 |
Category: |
Documents |
Upload: | trinhkhanh |
View: | 220 times |
Download: | 4 times |
5375 Western Avenue, Suite A Boulder, CO 80301-2744 Phone: 720.565.9609 [email protected]
www.stratom.comwww.stratom.com
Automatic Robotic ToolChangerThis capability enhances current UGV platforms by enabling the downrange remote and automated exchange of an array of IED defeat speci�c tools. This system will provide the operator with enhanced capabilities, decreased time on target, and increased opportunities to defeat and exploit the threat. No longer will the UGV be required to make multiple trips between the operator and the threat to change out tools. Additionally this capability will increase both the quantity and quality of recovered materials for forensics in support of C-IED operations.
ToolChanger Head is fully integrated on robotic arm
System Capabilities:
Automated Tool Exchange
Automatic ID and display of tool types and locations in library
Recon�gurable library - up to 5 modular tool stations on rack, mounted behind robot
Network connectivity of tools / sensors
USB interface available at tool changer head
Tool module accommodates range of tools: Data and Power, Power only, Mechanical only
Read / write capability to RFID tag on tools (ID, Serial #, cycle count, physical attributes)
Expandability of system and smart tools (complex tools performing own computation)
Allows for remote tool ejection while downrange and/or manual exchange
Strong and secure tool locking mechanism
Communicates to tools using network communications
Analog and digital channels
©2010 Stratom, Inc. All rights reserved. Stratom and Automatic Robotic ToolChanger are trademarks of Stratom, Inc. iRobot is a registered trademark of iRobot Corporation.
5375 Western Avenue, Suite A Boulder, CO 80301-2744
Phone: 720.565.9609 [email protected]
Integrated Main Menu icons for ToolChanger and tool operation
ToolChanger Menu allows for automatic tool interchange and tool inventory
Tool Menu allows for control of unique tool functionality and data
Displays continuous system status
ToolChanger Menu and Tool Menu Graphical Interface integrated with Robotic OCU
Tools are securely locked in place using an integrated locking mechanism
Tools can be manually removed from LOM
Manipulators are automatically identi�ed during robot power up and displayed on robotic OCU
LOM is con�gurable with up to 5 modular tool stations depending upon the size of the manipulator
Network connectivity of tools / sensors
USB interface available at tool changer head
Variety of tools and sensors can be loaded into the Library of Manipulators (LOM)™
Fact Sheet:Headquarters: Boulder, Colorado
Certi�cations & Programs: Service-Disabled Veteran-Owned Small Business (SDVOSB)
Registrations: CCR & ORCA Registered
DUNS Number: 087030545
CAGE Code: 33AC3
Quality Management & Safety Certi�cations: ISO 9001:2008 Registered
Facility Clearance: Top Secret
Certi�ed and Veri�ed
Service-DisabledVeteran-OwnedSmall Business