565/585 PRO - imeco-th.cz

TALYROND® 565/585 PRO

powered by

Ultra-high precision roundness measurement

2

SMART Move in action

TALYROND® 565/585 PROAdvanced roundness metrology, made simple

Roundness

Roughness

Contour

Topography

One software platform, multiple disciplines

High fidelity measurement

Critical to any measuring instrument is the stability of its metrology frame. Taylor Hobson’s expertise is in producing extremely low noise, high resolution instrumentation that guarantees measurement integrity.

We are so confident in our measurement capability that every instrument comes with static noise measurement, in fact, Taylor Hobson were the first and are one of the only roundness manufacturers that state noise levels.When you purchase from Taylor Hobson, you are investing in the most accurate, stable and repeatable measurement system on the market.

Metrology 4.0 User Interface

Gauge Roundness Roughness Contour

Radial accuracy± 0.01 μm

Gauge range, up to4 mm

Resolution, down to0.3 nm

Noise< 30 nm Rq all axes

Ra values< 0.1 μμm Rq

LS Arc measurement5 μμm

Pt0.5 μμm

3

TALYROND®

powered by

3

Cylinder plot Roundness plot Flatness plot

4

S M A R T S O F T W A R ECutting-edge technology

Unique benefits for both design and production

Frictionless high precision air bearing spindle provides world leading roundness results

High resolution gauge and low axis noise enables linear or circumferential surface roughness

A fully automated routine enabling 3D topography of cylindrical surfaces

Our patented calibration technique enables measurement of radii, angle, height, length, distance and more

Metrology 4.0 - Smart SoftwareClass-leading

The advancement in metrology software design that the market has been waiting for...

Taylor Hobson's advanced software enables dimensioning in accordance with part drawings and provides an exact reflection of the Part Co-ordinate System (PCS) delivering the final link in the manufacturing loop.

Metrology 4.0 software is easy to use with an intuitive user-interface, virtual display and real time control. The state-of-the-art point and move axis control function delivers precise positioning and accurate measurement.

Roundness

Range & Resolution

Noise

Roundness

Flatness

Straightness

Surface Texture

Topography

Contour

5

"Our strong investment meets the demands of high technology manufacturing"

Tim Garner, Operations Director. – Taylor Hobson Ltd.

Taylor Hobson's latest investment includes the Mazak Integrex i-200S with 10 axis, twin spindle, in cycle probing, tool break detection, unmanned running, temperature control, zero set up times, auto re-loading, high accuracy glass scales and 110 tool capacity.

Industry 4.0 in action

All of the critical components for the Talyrond® 500H PRO are manufactured in-house at our UK facility, with unique serial numbers for worldwide traceability.

Taylor Hobson has invested in the latest machining techniques to deliver measurement integrity through manufacturing excellence.

" Metrology 4.0 is a quantum leap in measurement and analysis "

6

Programmed measurement routines reduce cycle times and increase throughput

Programs reduce operator mistakes

Display traceable pass / fail results and automatic summary reports

Historic traceability is made possible via data exchange and part tracking

Control can be managed by barcode scanners or tracking/auditing system

Statistics such as automatic R&R studies

Tolerancing - Visually identifies the parameter and tolerance band

S M A R T FA C T O R YIndustry 4.0 supported by Metrology 4.0

The future of modern manufacturing

Industry 4.0 philosophy is driving what has been called a 'Smart Factory' through the process of automation, data exchange and control in manufacturing environments.

A "Smart Factory“ includes a variety of modern technologies such as, Internet of Things, Internet of People, Cloud computing, Smart sensors and Advanced SPC software.

Taylor Hobson’s ongoing developments support this approach and are in line with the Industry 4.0 philosophy. Metrology 4.0 software includes an intuitive, easy-to-use and modern Production Interface.

The Q-DAS accredited production interface is designed for shop floor environments and provides direct communication with SPC software, which delivers feedback to your manufacturing process.

This form of monitoring is used widely in automotive and aerospace manufacturing, where traceability and strict standard operating procedure control are mandatory.

7

Full automation

Powerfulsoftware

IntelligentCommunication

Accuratemachining

Bigdata

Quickfeedback

Taylor Hobson metrology directly monitoring production

Modern manufacturing cycle

1. Innovative design

2. State-of-the-art manufacturing

3. Fast and automated part-handling

4. Measurement and analysis powered by Metrology 4.0

5. Feedback of results to data centre for trend analysis

6. Monitor trends in the field or in production

7. Improve quality and efficiency

8

Centre & level

Another first is the unique three-point centre and levelling method which provides a stable and high-load capability.

Precise positional control combines with predefined alignment positions to produce the fastest centre and levelling device on the market.

This feature is ideal for high production volume environments where fast feedback is critical.

S M A R TSo much more than a roundness instrument

High precision velocity mode

Velocity analysis is a tried and tested facility for assessing low noise, high precision bearings and other precision rotational surfaces.

A critical element when looking at velocity, harmonics and none round components such as camshafts is the high resolution encoder. This ensures exact replication of harmonic frequencies and form on bearings, camshafts and other rotational components.

Automated axis calibration

A simple automated routine that allows the user to set all axis positions without manual entry, removing operator error and ensuring positional consistency when programming.

99

Centre and Level - Completed in less than half the time

10

Gauge range and resolution

Gauge orientation

The world-leading gauge delivers 4 mm of range, twice the range of most roundness instruments. This enables the unique capability of roundness, contour, and roughness measurement from a single gauge.

This universal gauge has a resolution down to 0.3 nm, when coupled with the system's low noise platform, the Talyrond® 500H PRO becomes a fully automated surface texture instrument.

Taylor Hobson’s patented method of gauge automatic attitude/orientation* combined with the “any attitude” Talymin 6 gauge ensure easy access the most complex of components.

The breakaway stylus has a naturally long reach and therefore rarely requires elongation; this extra reach is available in both horizontal and vertical modes.

U N I Q U ECutting-edge technology

Follow mode

Follow mode is possible using the Radial Straightness Unit, this ability to track the surface of the part allows measurement of tapers, splines, camshafts, CV joints and much more.

Comprehensive analysis can be made on circular or straightness profiles utilising the powerful Advanced Contour software.

* Talyrond 565 PRO has manual attitude/orientation.

11

Powerful Software - Giving confidence in your instrument

11

12

Crutch angle correction and automatic gain calibration

A simple approach to gauge calibration that literally takes seconds to do. Utilising the instrument high precision scales this procedure calibrates both the gauge gain and crutch angle position in a single user guided operation.

All subsequent movements of the gauge attitude orientation are updated to ensure corrected stylus tip position between the virtual and real instrument.

A U T O M AT I O NPrecise and fast instrument control

Low coning error

The smaller the coning error of any instrument the more reliable the results. In fact, coning error is the single biggest source of error when measuring cylindricity, parallelism and roundness of tall components.

It is a source of error often overlooked or written in the small print, this is not so with the Talyrond® 500H PRO which has the one of the lowest coning error on the market.

SMART Move and CAD models

A powerful utility that enables online and offline programming around a CAD model. Features include a stylus tip “flight path” enabling collision detection.

The Metrology 4.0 visual display is an exact replica of the real instrument; seeing is believing. Measurements are made between pre-defined points or from points fed back from the analysis process. Improved accuracy and repeatability can be achieved via the unique feedback process.

13

Talyrond® 500H PRO - Designed for metrology without compromise

13

14

S O F T W A R EBest-in-class metrology software

Calibration

One hit patented calibration routines provide accurate and precise measurements.

These routines are fast and do not require operator intervention ensuring maximum performance.

Part Co-ordinate System

Metrology 4.0 has two co-ordinate systems; instrument and part.

The Part Co-ordinate System (PCS) allows the user to control measurement and movement around any component according to the part drawing.

The on-screen view provides an exact simulation of the real instrument, allowing remote monitoring and at a glance confidence in the measurement process.

Status bar

Measurement Toolbar

15

Programming

A range of different modes that offer basic elements such as recordable part programming and an advanced toolbox of programmable features including variables.

The use of variables reduces the time it takes to create and maintain multiple part programs. This function allows one program to be created for a set of parts of differing sizes.

Macros

A new software feature that enables the user to define icon-based functions. These functions can be set to run custom measurement programs, media messages, instructions, warnings, calibration routines, and much more.

The user has instant and configurable access to all macro functions directly from the instrument control ribbon.

Media Messages - Include text, images and videos as operator prompts during programs

Real time display

Real time profile

Status bar

Measurement Toolbar

Instrument ribbon

Control toolbar

Talyrond® 585 PRO

16

SMART Move

Simply click on the screen to create a point and the instrument will then move the stylus tip to that point. The instrument moves using either the traverse, column or a combination of these axes. A pre-flight path allows the user to predict and control the axes of movement to avoid any obstructions.

Measurements are made between pre-defined points or from points fed back from the analysis process. Improved accuracy and repeatability can be achieved via the unique feedback process.

• Program around CAD models• Collision Prediction• Pre-flight path visualisation

• Simple click and move to position• Fully programmable• Define part coordinates from measured features

S O F T W A R EDesigned with the operator in mind

17

Icon-driven interface

Metrology 4.0 enables simulation of the measurement process with 'at-a-glance' status, on-screen indicators, real-time feedback and remote system control.

A range of different measurement modes are available via intuitive icons on the measurement tool bar. Tool tips give a detailed overview of the measurement.

User levels

The password protected modes provide complete control of a user's access, resulting in a tamper-proof software interface for use in the most secure environments.

SMART Move - A perfect tool for online and offline programming

18

Roundness

A complete roundness system capable of cylindricity, flatness, straightness, parallelism and much more.

Topography Contour

Transform your 2D measurement into a powerful 3D analysis to view the surface in greater detail using Metrology 4.0 Analysis 3D software.

An essential tool for geometric dimensioning, tolerancing of profiles and full form deviation analysis.

Save time and increase productivity with automation features within Contour analysis.

Contour and topography analyses are optional.

A N A LY S I SOne software platform, multiple disciplines

19

Surface texture

The Talyrond® 500H PRO has the lowest noise platform and the highest resolution gauge, enabling roughness measurement to a level normally associated with surface texture instruments.

Critical analysis types

• Twist measurement

• Harmonic analysis

• Velocity analysis

• Ballscrew measurement

• Wall/disc thickness

• Cam measurement

• Angle measurement

• Dual profile

• Data fusion

• Circumferential surface texture

• Profile patching

20

Desktop publishing

The desktop publishing features are powerful and simple to use allowing customisation of result layouts and ensuring a more professional and personalised look to your brand.

The software allows users to create templates and use them in the analysis process, which vastly simplifies the measurement process.

• Generate interactive reports

• Compose multi-page documents

• Multiple documents can be displayed on screen, which enables visual comparison of multiple results at once

• Build a professional report in a matter of minutes

• Include corporate logos

• Create certificates

D E S K T O P P U B L I S H I N GQuick, simple and professional

21

Feedback measurement control

Repeatability and reproducibility are key to any production process. Metrology 4.0 closes the loop between measurement and analysis by feeding back positional information to the movement or measurement process in order to improve process control.

Repeatability and reproducibility are key to any production process; the same is true for the measurement process.

Movements and measurements can be controlled by defined features on a part such as intersections.

• Measure profile

• Create datum points for critical features

• Add datum points to instrument view

• SMART Move to start position

• Measure between specified points

• Apply template to the analysis

* MATLAB™ software purchased separately from external source.

Customised analysis

Our strategy for success is simple, instead of just selling products, we provide solutions. If our standard software analysis packages do not satisfy your needs, we can customise a solution to match your requirement as an advanced module.

Alternatively Metrology 4.0 has built-in access to execute MATLAB™ files*. This enables the user to writing their own scripts and execute them by loading an 'm' file.

Design and program your own custom filters, analyses and parameters.

22

A P P L I C AT I O N SUnparalleled measurement capability

Ball screw

The Talyrond® 500H PRO provides measurement along the full length of the contact point of the ball screw or lead screw.

High precision control and low noise on all the instrument's axes enable analysis of harmonics and roughness and help towards ensuring smooth operation of the ball screw.

Camshafts

The instrument's radial straightness unit and high precision spindle allow measurement of a cam profile. Subsequent analysis can be done using Taylor Hobson’s Advanced contour software, enabling comparison to a DXF or lift data.

Other features of the contour software include surface texture and harmonic analysis.

23

Bearing races

The Talyrond® 500H PRO frictionless air bearing spindle has been developed to allow measurement of roundness and just as importantly harmonic analysis.

In fact every Talyrond 500H PRO® is extensively tested for harmonic noise to ensure results are from the part and not induced by the instrument.

Crankshafts

The instrument is truly universal and capable of not just roundness, straightness and cylindricity but also parallelism, twist, surface texture and the 3D topography of features such as oil hole washout.

24

A P P L I C AT I O N SBuy with confidence

Roller bearings

Low noise, precision straightness and a high-resolution gauge enable measurement of roller bearings.

This allows control of roughness, form, and roundness as well as providing part alignment information relating to the machine tool such as tilt, parallelism and offset.

Fuel injectors

Measurement capability normally associated with the Form Talysurf® PGI NOVUS such as seat angle, seat surface texture and seat straightness can be evaluated along with standard parameters such as parallelism, straightness, roundness, runout and much more.

25

Ball bearings

Electric Vehicle technology and the drive for efficiency and lower emissions have had a huge influence on bearing manufacture.

In order achieve these criteria, bearings are becoming more precise, pushing the boundaries of instrument capability.

The Talyrond® 500H PRO has the lowest noise floor on the market however this new high precision mode will reduce the noise even further ensuring high integrity results for Harmonics, Velocity and surface finish measurement.

Fluid dynamic bearings

The instrument can measure over 500 roundness planes with as little as 5 μm separation and up to 72,000 data points. The subsequent results can be analysed for roundness, topography and roughness as well as critical elements such as groove to width ratio and groove depth.

26

Surface texture

Roundness

A unique standard is available that provides measurement traceability for roughness in both a vertical and circumferential direction.

Using a precision polished glass hemisphere calibrated to an uncertainty of less than 5 nm Taylor Hobson can guarantee your spindle is within specification and maintain quality of results.

Harmonic standard

Contour

Taylor Hobson are the only instrument manufacturer that offer a harmonic standard with harmonics from 15 - 1500 upr.

This standard gives you confidence in your results.

Taylor Hobson’s patented calibration routine and calibration ball corrects for the arcuate motion of the stylus allowing dimensional measurement.

This routine is critical to measurement of radius and angled parts when normal calibration routines will not suffice.

T R A C E A B I L I T YCritical results, trust Taylor Hobson

Full traceability to international standards

Taylor Hobson provides full certification for artefacts and instruments in our purpose built ISO graded clean room UKAS facility.

Our UKAS laboratory is able to measure all of the parameters associated with surface texture, including French, German, USA and Japanese derivatives.

27

0026 2624

© Taylor Hobson Ltd. 2021. Talyrond® 500H PRO - 06/2021.

Straightness, squareness and parallelism

Automated probe calibration

To ensure the column and radial straightness unit conform to specification we can provide standards that are either cylindrical or flat. These standards provide certainty of the measurement axes.

These artefacts are combined with special software routines to enhance all axes for correct geometrical form.

The Talyrond® 500H PRO has a unique automated gain calibration for the instrument's gauge; the routine is automated and takes a matter of seconds to set.

Alternatively a set of calibrated slip blocks traceable to primary standards are also supplied.

The Metrology ExpertsEstablished in 1886, Taylor Hobson is the world leader in surface and form metrology and developed the first roundness and surface finish measuring instruments.

www.taylor-hobson.com

Service departmentEmail: [email protected] Tel: +44 (0) 116 246 2900

• Preventative maintenance – protect your metrologyinvestment with an AMECare support agreement.

Sales departmentEmail: [email protected] Tel: +44 (0) 116 276 3771

• Design engineering – special purpose, dedicatedmetrology systems for demanding applications.

• Precision manufacturing – contract machining servicesfor high precision applications and industries.

Centre of Excellence departmentEmail: [email protected] Tel: +44 (0) 116 276 3779

• Inspection services – measurement of your productionparts by skilled technicians using industry leadinginstruments in accord with ISO standards.

• Metrology training – practical, hands-on training coursesfor roundness and surface finish conducted byexperienced metrologists.

• Operator training – on-site instruction will lead togreater proficiency and higher productivity.

• UKAS calibration and testing – certification for artifactsor instruments in our laboratory or at customer’s site.

2624

© DiskArt™ 1988

Taylor Hobson UK (Global Headquarters)

PO Box 36, 2 New Star RoadLeicester, LE4 9JQ, England

Tel: +44 (0)116 276 [email protected]

Taylor Hobson FranceRond Point de l’Epine Champs Batiment D, 78990 Elancourt, France

Tel: +33 130 68 89 [email protected]

Taylor Hobson GermanyRudolf-Diesel-Straße 16, D-64331 Weiterstadt, Germany

Tel: +49 6150 543 [email protected]

Taylor Hobson ItalyVia Della Liberazione 24, 20068, Peschiera Borromeo, Zeloforamagno, Milan, Italy


Taylor Hobson IndiaDivyasree NR Enclave, 4th Floor, Block A,Plot No. 1, EPIP Industrial Area, Whitefield, Bengaluru - 560066, India


Taylor Hobson China [email protected]

Shanghai OfficePart A1, A4. 2nd Floor, Building No. 1, No. 526 Fute 3rd Road East, Pilot Free Trade Zone, Shanghai, 200131, China

Tel: +86 21 5868 5111-110

Beijing OfficeWestern Section, 2nd Floor, Jing Dong Fang Building (B10), No. 10, Jiu Xian Qiao Road, Chaoyang District, Beijing, 100015, China

Tel: +86 10 8526 2111

Chengdu OfficeNo. 9-10, 10th floor, 9/F, High-tech Incubation Park, No. 160, Jinyue West Road, Chengdu 610041, China

Tel: +86 28 8675 8111

Guangzhou OfficeRoom 810 Dongbao Plaza, No.767 East Dongfeng Road, Guangzhou, 510600, China

Tel: +86 20 8363 4768

Taylor Hobson Japan3F Shiba NBF Tower, 1-1-30, Shiba Daimon Minato-ku, Tokyo 105-0012, Japan

Tel: +81 34400 [email protected]

Taylor Hobson Korea#309, 3rd FL, Gyeonggi R&DB Center, 105, Gwanggyo-ro,Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea, 16229


Taylor Hobson SingaporeAMETEK Singapore, 10 Ang Mo Kio Street 65, No. 05-12 Techpoint, Singapore 569059

Tel: +65 6484 2388 Ext [email protected]

Taylor Hobson Thailand89/45, Moo 15, Enterprise Park, Bangna-Trad Road, Tambol Bangkaew, Amphur Bangplee, Samutprakarn Province 10540, Thailand


Taylor Hobson Taiwan10F-5, No.120, Sec. 2, Gongdao Wu Rd., Hsinchu City 30072, Taiwan

Tel: +886 3 575 0099 Ext [email protected]

Taylor Hobson MexicoAcceso III No. 16 Nave 3 Parque Ind. Benito Juarez Queretaro, Qro. Mexico C.P. 76120


Taylor Hobson USA27755 Diehl Road, Suite 300, Warrenville, IL 60555, USA


1100 Cassatt Road, Berwyn, PA 19312, USA Email: [email protected] Web: www.ametek.com

0026

© Taylor Hobson Ltd. 2021

1

powered by

System specification

TALYROND® 565/585 PRO

1490

mm

1940

mm

1690

mm

2190

mm

2390

mm

1200 mm column

1000 mm column

750 mm column

500 mm column

300 mm column

2

Optional software

Disk thickness variation Contour Software

Velocity analysis 3D analysis Software

Wall thickness variation Circumferential Surface finish analysis

Advanced harmonics Surface finish analysis

Harmonics Twist analysis

Filters

Roundness - Gaussian, Robust Gaussian, 2CR Phase corrected

Surface - Gaussian, Robust Gaussian, Double Gaussian, Spline, Analogic, 2CR Phase correct

Standard software

Roundness Cylindricity Parallellism Departure from True Plane (DFTP)

Squareness Total run-out Vertical straightness Departure from True Circle (DFTC)

Concentricity Flatness Partial arc flatness Radial straightness (RSU)

Coaxiality Eccentricity Partial arc roundness Multiplane flatness (RSU)

Slope Run-out Cylindrical mapping Multiplane roundness

Spindle axis

Radial limit of error (at table height)± 0.01 µm (1-15 upr) or ± 0.015 µm (1-50 upr)

Axial limit of error (at table center)± 0.01 µm (1-15 upr) or ± 0.015 µm (1-50 upr)

Coning Error (height above table) ± 0.00025 µm/mm

Coning Error (radius from centre) ± 0.00025 µm/mm

Horizontal arm axis Radial straightness unit Motorized radial arm

Straightness over full length of travel 0.25 µm / 200 mm (10 µin / 7.9 in) N/A

Straightness over any 50 mm 0.125 µm + 0.000625 µm/mm (5 µin + 0.025 µin/ in) N/A

Squareness to spindle axis 1 µm / 200 mm (39.4 µin / 7.9 in) N/A

Radius measurement* (0.1 µm/mm + 1.5 µm)

Arm noise † <30 nm Rq N/A

Gauge Range / Resolution

High range±2 mm / 0.016 µm (0.078 in / 0.6 µin)

Normal range ±1 mm / 0.008 µm (0.039 in / 0.3 µin)

Mid range±0.2 mm / 0.0016 µm (0.0078 in / 0.06 µin)

Low range±0.04 mm / 0.0003 µm (0.003 in / 0.012 µin)

Column axis 300 mm column 500 mm column 750 mm column 1000 mm column 1200 mm column

Straightness over column length0.3 µm / 300 mm (11.8 µin / 11.8 in)

0.3 µm / 500 mm (11.8 µin / 19.7 in)

0.5 µm / 750 mm(12.7 µin / 29.5 in)

0.75 µm / 1000 mm (29.5 µin / 39.4 in)

1 µm / 1200 mm (39.4 µin / 47.2 in)

Straightness over any 100 mm (3.94 in)

0.15 µm / 100 mm (5.9 µin / 3.94 in)

0.15 µm / 100 mm (5.9 µin / 3.94 in)

0.25 µm / 100 mm(6.35 µin / 3.94 in)

0.3 µm / 100 mm (11.8 µin / 3.94 in)

0.3 µm / 100 mm (11.8 µin / 3.94 in)

Vertical axis to spindle axis parallelism

0.5 µm / 300 mm (20 µin / 11.8 in)

0.75 µm / 500 mm (29.5 µin / 19.7 in)

0.75 µm / 750 mm (29.5 µin / 29.5 in)

1 µm / 1000 mm (39.4 µin / 39.4 in)

1.5 µm / 1200 mm (59 µin / 47.2 in)

Column noise † <30 nm <30 nm <30 nm TBA TBA

Measuring capacity 300 mm column 500 mm column 750 mm column 1000 mm column 1200 mm column

Maximum component height 300 mm (11.82 in) 500 mm (19.7 in) 750 mm (29.5 in) 1000 mm (39.4 in) 1200 mm (47.2 in )

Maximum component diameter Ø 400 mm (15.7 in) [extendable to 485 mm (19.1 in)]

Maximum bore measuring depth** 565H 160 mm (6.3 in) or 585H 155mm (6.1 in)

Maximum measuring diameter Ø 350 mm (13.8 in) [extendable to 435 mm (17.1 in)]

Maximum worktable loading 85 kg (187 lb)

Maximum worktable moment loading Auto C&L: 1250 kg/mm (108 lb / in) within a central 80 mm (3.15 in) equilateral triangle

System specification - Talyrond® 565H / 585H PRO

Analysis capability

Measurement capability

Component capacity

All accuracies are quoted at 20º C ± 1º C (68º F ± 1.8º F). All roundness and flatness results are quoted as the departure from the Least Squares Circle (LSC) at 1 - 50 UPR, Gaussian filter, 6 RPM, clockwise rotation (unless otherwise specified). All errors are quoted as maximum permissible errors (MPE). All straightness / parallelism results are quoted with an 8 mm cut-off, low pass filter, 5mm/s measuring speed, Minimum Zone (MZ) reference.

Quoted uncertainties are at 95% confidence in accordance with recommendations in the ISO Guide to the Expression of Uncertainty in Measurement (GUM: 1993).

All measurements are taken using a standard 100 mm-length stylus with 2 mm-diameter ball tip. All measurements of roundness and flatness are quoted using the gauge horizontal orientation. All measurements of roundness are relative to the calibrated form of a glass hemisphere. Calibration error of glass hemisphere is ± 5nm.

The above quoted technical data is for measurements taken with good metrology practice in a draft free, controlled environment isolated from low frequency floor borne vibration (i.e., metrology laboratory or Taylor Hobson supplied environmental enclosure).

Taylor Hobson pursues a policy of continual improvements due to technical developments. We therefore reserve the right to deviate from catalogue specifications.

3

Technical

Spindle axis

Spindle construction Precision air bearing

Speed of rotation 0.3, 0.6, 1, 2, 6, 10 rpm, bi-directional

Positional control ± 0.2°

Positional resolution 0.02° (optional ± 0.005°)

Number of data points (selectable) 3600 and 18,000 (optional 72,000)

Horizontal arm axis Radial straightness unit Motorized radial arm

Arm construction Lapped ceramic datum Extruded aluminum datum

Movement range 200 mm (7.9 in) 200 mm (7.9 in) 300 mm (11.8 in)

Speed of traverse - moving 0.25 - 15 mm/s (0.01 - 0.6 in/s) stepped

- measuring 0.25 - 15 mm/s (0.01 - 0.6 in/s) stepped N/A

- contacting 0.5 - 5 mm/s (0.02 - 0.2 in/s) stepped

Over-center travel 25 mm (0.98 in) in standard column position

Positional control 5 µm (200 µin)

Positional resolution 0.25 µm (0.98 µin)

Minimum movement 0.05 mm (0.002 in)

Number of data points (selectable) 200,000

Centering and leveling table Automatic

Achievable accuracy of auto centering <0.8 µm (32 µin)

Achievable accuracy of auto leveling <0.8 arc secs

Construction Patented 3 point kinematic support

Center and leveling table control Automatic with continuous spindle rotation

Follow mode center and leveling Yes

Centering range ± 5 mm (0.2 in)

Leveling range ± 0.5°

Worktable diameter 300 mm (11.8 in)

Gauge attitude/orientation Talyrond® 565H Talyrond® 585H

Control Manual Automatic

Attitude Horizontal and Vertical

Attitude Vertical Internal / External

Attitude Horizontal Up / Down or Extend / Retract

OrientationRotation in steps of 30°

Rotation in steps of 1°

Gauge

Gauge typeTalymin 6 single bias inductive transducer

Stylus tip force 0 to 4 g adjustable

Crutch angle Adjustable (optional fixed)

Cresting (Talyrond® 585H)Dual cresting facility (horizontal & vertical)

EnvironmentTemperature (general operation) 5°C to 35°C (41°F to 95°F)

Humidity (general operation) *** 30% to 80% relative humidity, non-condensing

Temperature (storage) -10°C to 70°C (14°F to 158°F)

Humidity (storage) 10% to 90% relative humidity, non-condensing

Temperature Gradient <2°C / hour (<3.6°F / hour)

Free air Flow rate (Steady) 1.0 m/sec (39.4 in/sec) maximum

Maximum RMS vertical 0.05 mm/s (0.002 in/s) at < 50 Hz

Floor vibration 0.10 mm/s (0.004 in/s) at > 50 Hz

Electrical (alternating supply, single phase with earth, 3-wire)

Instrument & computer voltage90 V - 130 V or 200 V - 260 V (switch selectable)

Frequency 47 Hz to 63 Hz

Power consumption 500 VA maximum

Safety

BS EN 61010-1, BS EN 349, BS EN 13850, BS EN 983, BS EN 60204 Machinery Directive standards

EMC BS EN 61000-6-1, BS EN 61000-6-3

Air supply

Air pressure4.5 to 10 bar(65 to 145psi, 0.45 to 1MPA)

Regulator (pre-set) 3.5 bar (51psi, 0.35 MPa)

Max. particle size 5 micron (0.0002 in)

Moisture content – dew point +3°C (37°F)

Flow rate at operating pressure 150 litres/minute (Min.) 5.3 ft3 /min

Max oil content 25 mg/m3 (0.01 grains / ft3)

Solid particle content 5 mg/m3 (0.002 grains / ft3)

Column axis 300 mm column 500 mm column 750 mm column 1000 mm column 1200 mm column

Column construction Precision machined cast iron

Movement range 300 mm (11.8 in) 500 mm (19.7 in) 750 mm (29.5 in) 1000 mm (39.4 in) 1200 mm (47.2 in)

Speed of traverse - moving 0.1-105 mm/sec (0.004 - 4.33 in/sec) stepped

- measuring 0.1-20 mm/sec (0.004 - 0.8 in/sec) stepped

- contacting 0.5-5 mm/sec (0.02 - 0.2 in/sec) stepped

Positional control 4 µm

Length measurement (0.03 µm/mm + 1.5 µm)

Positional resolution 0.25 µm (0.98 µin)

Number of data points (selectable) 200,000

† Vertical traverse measured with a 10 kg load at 200 mm height; horizontal traverse measured with a 20 Kg load at 400 mm height. All measurements based on a nominally leveled glass flat using the specified stylus; analyzed using a Gaussian filter, 0.8 mm cut off, 300:1 bandwidth and parameter Rq.* Based on measurements made within 2 mm radius of a calibrated ring or plug gauge** With standard length stylus*** Between 31°C and 40°C the humidity should decrease linearly from 80% down to 50%.

TALYROND®

powered by

4

System floor plan

1490

mm

799

mm

1940

mm

1690

mm

2190

mm

2390

mm

1200 mm column Nominal instrument weight: 320 kg (705 lb)





Talyrond® 565H / 585H PRO with desk

350

mm

851

mm

500

mm

870 mm

500 mm

900 mm1920 mm

702

mm

5

1490

mm

890

mm

1940

mm

1690

mm

2190

mm

2390

mm






Talyrond® 565H / 585H PRO with ECU Cabinet

440

mm

800

mm

500

mm

870 mm

500 mm

550 mm

1600 mm

702

mm

6

World-Class Global Support

We know that the performance of your instrument is important to you. It is important to us as well. Taylor Hobson AMECARE agreements are designed to reduce down time and ensure your instrument maintains optimum performance

Taylor Hobson’s Technical Support Services provide you with a wide range of solutions to ensure your equipment stays working at its optimum performance like the day you purchased it.

A full suite of support services delivered by uniquely qualified engineers

AMECare Support agreementsAll work is carried out by our own accredited service engineers who are dedicated to providing the quality support you need to ensure credibility of your measurement results

• Trained in maintenance and calibration procedures

• Use UKAS traceable calibration artifacts

• Trained to resolve instrument issues that can affect operation

AMECare Benefits• Protect your hardware investment

• Reduce unscheduled downtime

• Ensure instrument reliability

• Ensure consistent accuracy of measurements

• Extend the life expectancy and productivity

• Peace of mind and insurance against unexpected repair costs

7

UK

USA

China

Singapore

France

Mexico

India

Germany

Brazil

Japan

Korea

Italy

Thailand

Taiwan

Local Services from a truly global companyWe are committed to providing world-class support to our global partners

Service supportA worldwide team of fully accredited service engineers:

• Helpdesk support

• Preventative maintenance

• Global calibration service

Training supportWe provide local specialised operator and metrology training:

• Individual, personalised and hands-on

• Improve operator productivity

• Improve metrology understanding

Your instrument is only as good as the operator using it, we provide on-site/online training to give you the confidence you need in your measurement results.

Ongoing application support is delivered by our team of expert metrologists who have unmatched knowledge in their field. Our professional metrologists solve the most demanding application problems daily and thrive on the delivery of measurement solutions.

Local training

The Metrology ExpertsEstablished in 1886, Taylor Hobson is the world leader in surface and form metrology and developed the first roundness and surface finish measuring instruments.

www.taylor-hobson.com

Service departmentEmail: [email protected] Tel: +44 (0) 116 246 2900

• Preventative maintenance – protect your metrologyinvestment with an AMECare support agreement.

Sales departmentEmail: [email protected] Tel: +44 (0) 116 276 3771

• Design engineering – special purpose, dedicatedmetrology systems for demanding applications.

• Precision manufacturing – contract machining servicesfor high precision applications and industries.

Centre of Excellence departmentEmail: [email protected] Tel: +44 (0) 116 276 3779

• Inspection services – measurement of your productionparts by skilled technicians using industry leadinginstruments in accord with ISO standards.

• Metrology training – practical, hands-on training coursesfor roundness and surface finish conducted byexperienced metrologists.

• Operator training – on-site instruction will lead togreater proficiency and higher productivity.

• UKAS calibration and testing – certification for artifactsor instruments in our laboratory or at customer’s site.

2624

© DiskArt™ 1988

Taylor Hobson UK (Global Headquarters)

PO Box 36, 2 New Star RoadLeicester, LE4 9JQ, England

Tel: +44 (0)116 276 [email protected]

Taylor Hobson FranceRond Point de l’Epine Champs Batiment D, 78990 Elancourt, France


Taylor Hobson GermanyRudolf-Diesel-Straße 16, D-64331 Weiterstadt, Germany


Taylor Hobson ItalyVia Della Liberazione 24, 20068, Peschiera Borromeo, Zeloforamagno, Milan, Italy


Taylor Hobson IndiaDivyasree NR Enclave, 4th Floor, Block A,Plot No. 1, EPIP Industrial Area, Whitefield, Bengaluru - 560066, India


Taylor Hobson China [email protected]

Shanghai OfficePart A1, A4. 2nd Floor, Building No. 1, No. 526 Fute 3rd Road East, Pilot Free Trade Zone, Shanghai, 200131, China

Tel: +86 21 5868 5111-110

Beijing OfficeWestern Section, 2nd Floor, Jing Dong Fang Building (B10), No. 10, Jiu Xian Qiao Road, Chaoyang District, Beijing, 100015, China

Tel: +86 10 8526 2111

Chengdu OfficeNo. 9-10, 10th floor, 9/F, High-tech Incubation Park, No. 160, Jinyue West Road, Chengdu 610041, China

Tel: +86 28 8675 8111

Guangzhou OfficeRoom 810 Dongbao Plaza, No.767 East Dongfeng Road, Guangzhou, 510600, China

Tel: +86 20 8363 4768

Taylor Hobson Japan3F Shiba NBF Tower, 1-1-30, Shiba Daimon Minato-ku, Tokyo 105-0012, Japan

Tel: +81 34400 [email protected]

Taylor Hobson Korea#309, 3rd FL, Gyeonggi R&DB Center, 105, Gwanggyo-ro,Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea, 16229


Taylor Hobson SingaporeAMETEK Singapore, 10 Ang Mo Kio Street 65, No. 05-12 Techpoint, Singapore 569059


Taylor Hobson Thailand89/45, Moo 15, Enterprise Park, Bangna-Trad Road, Tambol Bangkaew, Amphur Bangplee, Samutprakarn Province 10540, Thailand


Taylor Hobson Taiwan10F-5, No.120, Sec. 2, Gongdao Wu Rd., Hsinchu City 30072, Taiwan

Tel: +886 3 575 0099 Ext [email protected]

Taylor Hobson MexicoAcceso III No. 16 Nave 3 Parque Ind. Benito Juarez Queretaro, Qro. Mexico C.P. 76120


Taylor Hobson USA27755 Diehl Road, Suite 300, Warrenville, IL 60555, USA


1100 Cassatt Road, Berwyn, PA 19312, USA Email: [email protected] Web: www.ametek.com

0026

© Taylor Hobson Ltd. 2021

Date post:	07-Jan-2022
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

565/585 PRO - imeco-th.cz

Documents