MODEL

WM5

5kgFront LoaderWashing MachineManual

Installation and Operation

2 - EN

1 WarningsGeneral Safety• Neverplaceyourmachineonacarpet

coveredfloor.Otherwise,lackofairflowfrombelowofyourmachinemaycauseelectricalpartstooverheat.Thismaycauseproblemswithyourwashingmachine.

• IfthepowercableormainsplugisdamagedyoumustcallAuthorizedServiceforrepair.

• Fitthedrainhoseintothedischargehousingsecurelytopreventanywaterleakageandtoallowmachinetotakeinanddischargewaterasrequired.Itisveryimportantthatthewaterintakeanddrainhosesarenotfolded,squeezed,orbrokenwhentheapplianceispushedintoplaceafteritisinstalledorcleaned.

• Yourwashingmachineisdesignedtocontinueoperatingwhenthepowerrestoresafterapowerinterruption.Themachinewillresumeitsprogramwhenthepowerrestores.Pressthe“Start/Pause/Cancel”buttonfor3secondstocanceltheprogram(See,CancelingaProgram)

• Theremaybesomewaterinyourmachinewhenyoureceiveit.Thisisfromthequalitycontrolprocessandisnormal.Itisnotharmfultoyourmachine.

• Someproblemsyoumayencountermaybecausedbytheinfrastructure.Press“Start/Pause/Cancel”buttonfor3secondstocanceltheprogramsetinyourmachinebeforecallingtheauthorizedservice.

First Use• Carryoutyourfirstwashingprocess

withoutloadingyourmachineandwithdetergentunder“Cottons90°C”program.

• Ensurethatthecoldandhotwaterconnectionsaremadecorrectlywheninstallingyourmachine.

• Ifthecurrentfuseorcircuitbreakerislessthan16Amperes,pleasehaveaqualifiedelectricianinstalla16Amperefuseorcircuitbreaker.

• Whileusingwithorwithoutatransformer,donotneglecttohavethegroundinginstallationlaidbyaqualifiedelectrician.Ourcompanyshallnotbeliableforanydamagesthatmayarisewhenthemachineisusedonalinewithoutgrounding.

• Keepthepackagingmaterialsoutofreachofchildrenordisposethembyclassifyingaccordingtowastedirectives.

Intended use• Thisproducthasbeendesignedforhome

use.• Theappliancemayonlybeusedfor

washingandrinsingoftextilesthataremarkedaccordingly.

Safety instructions• Thisappliancemustbeconnectedto

anearthedoutletprotectedbyafuseofsuitablecapacity.

• Thesupplyanddraininghosesmustalwaysbesecurelyfastenedandremaininanundamagedstate.

• Fitthedraininghosetoawashbasinorbathtubsecurelybeforestartingupyourmachine.Theremaybeariskofbeingscaldedduetohighwashingtemperatures!

• Neveropentheloadingdoororremovethefilterwhilethereisstillwaterinthedrum.

• Unplugthemachinewhenitisnotinuse.• Neverwashdowntheappliancewitha

waterhose!Thereistheriskofelectricshock!

• Nevertouchtheplugwithwethands.Donotoperatethemachineifthepowercordorplugisdamaged.

• Formalfunctionsthatcannotbesolvedbyinformationintheoperatingmanual:

• Turnoffthemachine,unplugit,turnoffthewatertapandcontactanauthorizedserviceagent.Youmayrefertoyourlocalagentorsolidwastecollectioncenterinyourmunicipalitytolearnhowtodisposeofyourmachine.

If there are children in your house...• Keepchildrenawayfromthemachine

whenitisoperating.Donotletthemtamperwiththemachine.

• Closetheloadingdoorwhenyouleavetheareawherethemachineislocated.

3 - EN

2 InstallationRemoving packaging reinforcementTilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon.

Opening the transportation locksATransportationsafetyboltsmustbe

removedbeforeoperatingthewashingmachine!Otherwise,themachinewillbedamaged!

1. Loosenalltheboltswithaspanneruntiltheyrotatefreely(“C”)

2. Removetransportationsafetyboltsbyturningthemgently.

3. Fitthecovers(suppliedinthebagwiththeOperationManual)intotheholesontherearpanel.(“P”)

C Keepthetransportationsafetyboltsin

asafeplacetoreusewhenthewashingmachineneedstobemovedagaininthefuture.

C Nevermovetheappliancewithoutthetransportationsafetyboltsproperlyfixedinplace!

Adjusting the feetADonotuseanytoolstoloosenthelock

nuts.Otherwise,theycanbedamaged.1. Manually(byhand)loosenthelocknutson

thefeet.2. Adjustthemuntilthemachinestandslevel

andfirmly.3. Important:Tightenalllocknutsupagain.

Connecting to the water supply.Important:• Thewatersupplypressurerequiredtorun

themachinemustbe1-10bar(0,1–1MPa).

• Connectthespecialhosessuppliedwiththemachinetothewaterintakevalvesonthemachine.

• Ifyouaregoingtouseyourdoublewater-inletmachineasasingle(cold)water-inletunit,youmustinstallthestopper*,suppliedwithyourmachinetothehotwatervalve.

• Ifyouwanttousebothwaterinletsoftheproduct,youcanconnectthehotwaterhoseafterremovingthestopperandgasketgroupfromthehotwatervalve.

* Applies for the products supplied with a blind stopper group.• Modelswithasinglewaterinletshouldnot

beconnectedtothehotwatertap.When returning the appliance to its place after maintenance or cleaning, care should be taken not to fold, squeeze or block the hoses.Connecting to the drainThe water discharge hose can be attached to the edge of a washbasin or bathtub. The drain hose should be firmly fitted into the drain as to not get out of its housing.Important:• Theendofthedrainhosemustbedirectly

connectedtothewastewaterdrainortothewashbasin.

• Thehoseshouldbeattachedtoaheightofatleast40cm,and90cmatmost.

• Incasethehoseiselevatedafterlayingitonthefloorlevelorclosetotheground(lessthan40cmabovetheground),waterdischargebecomesmoredifficultandthelaundrymaycomeoutwet.

• Thehoseshouldbepushedintothedrainageformorethan15cm.Ifitistoolongyoumayhaveitshortened.

• Themaximumlengthofthecombinedhosesmustnotbelongerthan3.2m.

90

4 - EN

Electrical connectionConnect the machine to an earthed outlet protected by a fuse of suitable capacity.Important:• Connectionshouldcomplywithnational

regulations.• Thevoltageandtheallowedfuse

protectionarespecifiedinthesection“TechnicalSpecifications”.

• Thespecifiedvoltagemustbeequaltoyourmainsvoltage.

• Connectionviaextensioncordsormulti-plugsshouldnotbemade.

BAdamagedpowercablemustbereplacedbyaqualifiedelectrician.

BTheappliancemustnotbeoperatedunlessitisrepaired!Thereistheriskofelectricshock!

3 Initial preparations for washingPreparing clothes for washingLaundry items with metal attachments such as, bras, belt buckles and metal buttons will damage the machine. Remove metal attachments or place the items in a clothing bag, pillow case, or something similar.• Sortthelaundryaccordingtotypeoffabric,

color,anddegreeofsoilingandpermissiblewatertemperature.Alwaysfollowtheadviceonthegarmentlabels.

• Placesmallitemslikeinfants’socksandnylonstockings,etc.inalaundrybag,pillowcaseorsomethingsimilar.Thiswillalsosaveyourlaundryfromgettinglost.

• Wash“machinewashable”or“handwashable”labeledproductsonlywithanappropriateprogram.

• Donotwashcolorsandwhitestogether.New,darkcoloredcottonsmayreleasealotofdye.Washthemseparately.

• Useonlydyes/colorchangersandlimeremoverssuitableformachinewash.Alwaysfollowtheinstructionsonthepackaging.

• Washtrousersanddelicateclothesturnedinsideout.

Correct load capacityCPleasefollowtheinformationinthe

"ProgramSelectionTable".Washingresultswilldegradewhenthemachineisoverloaded.

Loading doorThe door locks during program operation and the Door Locked Symbol lights up. The door can be opened when the symbol fades out.

Detergents and softenersDetergent DrawerThe detergent dra wer is composed of three compartments:The detergent dispenser may be in two different types according to the model of your machine.– (I) for prewash– (II) for main wash- (III) siphon – ( ) for softener

Detergent, softener and other cleaning agentsAdd detergent and softener before starting the washing program.Never open the detergent dispenser drawer while the washing program is running!When using a program without pre-wash, no detergent should be put into the pre-wash compartment (Compartment no. I).Detergent quantityThe amount of washing detergent to be used depends on the amount of laundry, the degree of soiling and water hardness.• Donotuseamountsexceedingthe

quantitiesrecommendedonthepackagetoavoidproblemsofexcessivefoam,poorrinsing,financialsavingsandfinally,environmentalprotection.

• Neverexceedthe(>max<)levelmarking;otherwise,thesoftenerwillbewastedwithoutbeingused.

• Donotuseliquiddetergentifyouwanttowashusingthetimedelayfeature.

5 - EN

Figure 2

4 Selecting a Program and Operating Your Machine

1 - Spin Speed Adjustment Button2 - Time Delaying Button (+/-)3 - Temperature Adjustment Button4 - Start/Pause/Cancel Button

Control panelFigure 1

7.a - Spin Speed Indicator7.b - Temperature Indicator7.c - Spin Symbol7.d - Temperature Symbol7.e - Remaining Time and Delaying Time

Indicator7.f - Programme Indicator Symbols (pre-

wash/main wash/rinse/softener/spin)7.g - Economy Symbol7.h - Time Delaying Symbol7.i - Door Locked Symbol7.j - Start Symbol7.k - Standby Symbol7.l - Auxiliary Function Symbols7.m - Water cut-off Symbol (According to your machine’s model)

Display symbols

Turning the machine onPlug in your machine. Turn the tap on completely. Check if the hoses are connected tightly. Place the laundry in the machine. Add detergent and softener. Press the “On/Off” button.Program selectionTurn the Programme Selection Knob to the program mode that you wish to wash your laundry.

The recommended temperature and spin speed for the selected program appear. Press “Start/Pause/Cancel” button to start the program.CSortthelaundryaccordingtotypeoffabric,

color,degreeofsoilingandpermissiblewatertemperaturewhenchoosingaprogram.

Main programs Depending on the type of textile, the following main programs are available:

F1 F2 F3 F4

5 - Auxiliary Function Keys6 - Program Selection Knob7 - Display8 - On/Off Button

1 7

2

3 6

5 4

8

6 - EN

• CottonYou can wash normally soiled durable cotton clothes with this program. Your laundry will be washed with vigorous washing movements during a longer washing cycle.• SyntheticsYou can wash your less durable clothes on this program. Lighter washing movements and shorter washing cycle is used compared to “Cottons” program. It is recommended for your synthetic clothes (such as shirts, blouses, synthetic/cotton blended garments, etc.). For curtains and lace, the “Synthetic 40” program with pre-wash and anti-creasing functions selected is recommended.• WoollensYou can wash your machine-washable woolen garments on this program. Wash by selecting the proper temperature according to the labels of your clothes. It is recommended to use appropriate detergents for woolens. Additional programs For special cases, there are also extra programs available:CAdditionalprogramsmaydifferaccording

tothemodelofyourmachine.• BabycareIncreased hygiene is provided by a longer heating period and an additional rinse cycle. It is recommended for baby clothes and clothes worn by allergic people.• DelicateYou can wash your delicate clothes on this program. It has more sensitive washing movements and does not make intermediate spinning compared to “Synthetic” program.• Hand washYou can wash your woolen/delicate clothes that bear “not machine- washable” labels for which hand wash is recommended on this program. It washes the laundry with very tender washing movements without damaging your clothes.• Mix 40This program washes for a longer period at 40°C and gives the same result as the “Cottons 60°C” program, thus it saves energy. It is suitable for clothes for which you cannot use the “Cottons 60°C” program.• IntensiveYou can wash your durable and heavily soiled clothes on this program. In this program, your clothes will be washed for a longer time and an extra rinse cycle will be made compared to the “Cottons” program.• DarkcareUse this programme to wash your dark coloured laundry, or the coloured laundry that you do not want them get faded. This

programme washes your laundry with low mechanical movements and at low temperature. We recommend you to use liquid detergent or woolen shampoo for dark coloured laundry. • Daily XpressThis program is used to wash lightly soiled and unstained cotton garments in a short time.• Xpress Super ShortYou can use this program to quickly wash a small number of lightly soiled and unstained cotton garments. E.g.: bathrobes, duvet covers, sport wear, daily clothes and etc. used only once.

Economy SymbolShows energy saving programs and temperature selections.As “Intensive” and “Baby” programs are long programs with higher temperature selections to ensure hygiene, “Economy” Symbol will not light up.Special programsFor specific applications, you can select any of the following programs:• RinseThis program is used when you want to rinse or starch separately.• Spin+DrainThis program spins with maximum possible rpm in the default setting after the water drains from the machine.CUsealowerspinspeedfordelicate

laundries.Temperature selectionWhenever a new program is selected, the temperature anticipated for that program appears on the temperature indicator.To change the temperature, press the “Temperature” button. Temperature decreases in 10° increments.Cold selection is shown with “-” symbol.

90˚C Heavily soiled, white cottons and linens.

60˚C Normally soiled, fade proof colored linens, cottons or synthetic clothes and lightly soiled white linens

40˚C30°CCold

Blended clothes including synthetics and woolens as well as delicates.

Spin Speed selectionWhenever a new program is selected, the maximum spin speed of the selected program is displayed on the spin speed indicator.To decrease the spin speed, press the “Spin” button. Spin speed decreases gradually. Then,

7 - EN

rinse hold and no spin options are shown respectively.Rinse hold is shown with “ ” and no spin is shown with “ ” symbols.If you do not want to unload your clothes immediately after the program, you may use the rinse hold function in order to prevent your clothes become wrinkled in an anhydrous condition. With this function, your laundry is kept in the final rinsing water. If you want to

spin your laundry after the rinse hold function:- Adjustthespinspeed.- Press“Start/Pause/Cancel”button.

Programresumes.Yourmachinedrainsthewaterandspinsyourlaundry.

You can use no spin function in order to drain the water without spinning at the end of the program.

Program selection and

• Selectable* Automatically selected, not cancelable. *** If maximum spin speed of your machine is lower, selection may be made until maximum spin speed.Water and power consumption and programme duration may differ from the table shown, subject to changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions, and fluctuations in the supply voltage.CTheauxiliaryfunctionsinthetablemaydifferaccordingtothemodelofyourmachine.

CProgrammedurationwillbedisplayedonthescreenofyourmachineaccordingtoyourselection.

consumption tableEN 2 Auxiliaryfunctions Temperature

Max.Load(kg)

Water

Consumption(l)

Energy

Consumption

(kWh)

SpinSpeed

(rpm)***

Prewash

QuickW

ash

RinsePlus

Anti-C

reasing

RinseHold

Selectable

temperature

range°C

Cotton 90 5 63 1.80 1600 • • • • • 90-ColdCotton 60** 5 61 0.90 1600 • • • • • 90-ColdCotton 40 5 61 0.70 1600 • • • • • 90-ColdIntensive 60 5 61 1.35 1600 * • • 60-40Babycare 90 5 61 1.80 1600 * • 90-30Synthetics 60 2.5 40 0.90 1000 • • • • • 60-ColdSynthetics 40 2.5 35 0.40 1000 • • • • • 60-ColdMix 40 3 35 0.45 1000 • • • • • 40-ColdDarkcare 40 2.5 55 0.45 1000 * • 40-ColdWoollen 40 1.5 40 0.30 1000 • • 40-ColdHandwash 30 1 30 0.20 1000 30-ColdXpressSuperShort 30 2 30 0.10 1400 • • 30-ColdDailyXpress 90 5 50 2.00 1400 • • 90-ColdDailyXpress 60 5 50 1.20 1400 • • 90-ColdDailyXpress 30 5 60 0.25 1400 • • 90-Cold

** Energy & Water labelling test programme according to AS/NZS 2040.1

8 - EN

Auxiliary functionsAuxiliary Function Selection ButtonsCSelecttherequiredauxiliaryfunctions

beforestartingtheprogram.CSomecombinationscannotbeselected

together.(Ex.:Pre-wash)(Figure1-5a)andQuickWash(Figure1-5b).

Auxiliary function selectionIf an auxiliary function that should not be selected together with a previously selected function is chosen, the first selected function will be cancelled and the last auxiliary function selection will remain active.(Ex.: If you want to select pre-wash first and then quick wash, pre-wash will be cancelled and quick wash will remain active.Auxiliary function that is not compatible with the program cannot be selected. (see, “Program Selection Table”)• PrewashWhen you select this function (5a), the display will indicate “1” symbol. A pre-wash is only worthwhile for heavily soiled laundry. Without pre-wash you save energy, water, detergent and time. Pre-wash without detergent is recommended for lace and curtains.• Quick WashWith this function (5b), the wash time is shortened. The “2” symbol will light up on the display. Use this function for smaller amounts or slightly soiled laundries.• Rinse PlusThis function (5c) allows your machine to perform an extra rinsing in addition to the rinsing cycles performed by your machine after main washing cycle. Thus, the risk for sensitive skins (babies, allergic skins and etc.) to be effected by the minimal detergent remnants on the laundry is reduced. “3” symbol will light up on the display.• Anti-CreasingWith this function (5d), drum movement will be lessened to prevent creasing and spinning speed is limited. In addition, washing is carried out at a higher water level. The “4” symbol will light up on the display.CWheneveryouselectthisauxiliaryfunction,

loadyourmachinewithhalfofthemaximumlaundryspecifiedintheprogramtable.

Time displayThe display shows the time remaining for the program to complete while a program is running. Program duration may differ from the values in the consumption table subject to the changes in the water pressure, water hardness and temperature, ambient temperature, type

and amount of laundry, auxiliary functions selected, and changes in the supply voltage.

Time delayWith the “Time delay” function you can delay the program start up to 24 hours. Setting can be made in intervals of 30 minutes.1. Press“Timedelaying”buttons“+”and“-”

tosetyourdesiredtimedelay.2. Press“Start/Pause/Cancel”button.Then

thetimedelaystartstocountdown.CMorelaundrymaybeloadedortakenout

duringthetimedelayperiod.

Changing the delay timeIf you want to change the time during the countdown:1. Press“Start/Pause/Cancel”button.2. Press“Timedelaying”buttons“+”or“-”to

setthedesiredtimedelay.3. Press“Start/Pause/Cancel”button.

Canceling the time delayIf you want to cancel the time delay countdown and start the program immediately:1. Press“Start/Pause/Cancel”button.2. Pres“TimeDelaying”“-”buttonto

decreasethetimedelay.Programdurationafter30minutesshallbedisplayed.

3. Press“Start/Pause/Cancel”buttontostarttheprogram.

Starting the Program1. Press“Start/Pause/Cancel”buttontostart

theprogram.2. Thestartsymbol(Figure2-7j)which

indicatesthattheprogramhasstartedwilllightup.

3. Thedoorlocksandthedoorlockedsymbol(Figure2-7i)willlightup.

4. TheSymboloftherelevantstep(prewash,mainwash,rinse,softenerandspin)thattheprogramhasstartedfromwilllightup(Figure2-7f).

CIfthemachineisnotspinning,theprogrammaybeinrinseholdmodeortheautomaticspincorrectionsystemhasbeenactivatedduetoanexcessiveunbalanceddistributionoflaundryinthemachine.

Changing the selections after the program has startedThe selected spin speed and program temperature fade out. An empty frame appears.When the “Program selection” button is brought to the appropriate position, rpm and temperature data reappear.

9 - EN

Switching the machine to standby modePress “Start/Pause/Cancel” button momentarily to switch your machine to the standby mode. Auxiliary functions can be cancelled or selected in accordance with the step the program is at. The door can be opened if the water level is suitable. Laundry may be added / taken out by opening the door.

Door lockThe Door Locked Symbol (Figure 2-7i) lights up when the loading door is locked. This symbol will flash until the door is allowed to open. Do not force the door at this stage. You may open the door after the symbol fades out.

Child-proof lockThis function protects the appliance from being tampered by children. In this case, all of the buttons are inactive except On/Off button; by On/Off button you can whether stop or resume (while child-lock on) the program of your machine.The machine is switched to child-lock by pressing the 2nd and 4th auxiliary functions for 3 sec. “C:on” (Child lock is activated) label appears on the screen. The same symbol will also be displayed whenever any button is pressed while the machine is child-locked.To deactivate the child-proof lock, press the 2nd and 4th auxiliary function buttons for 3 sec. “C:OFF” (Child lock is deactivated) label appears on the screen.

Ending the program through canceling“Start/Pause/Cancel” button is pressed for 3 seconds to cancel the program. Start symbol (Figure 2-7j) will flash during cancellation. After cancellation, the symbol of the corresponding step at which the cancellation was made will remain lit and “End” will appear on the screen.

End of programWhen the program is finished, the symbols of the relevant steps will remain lit up and the auxiliary function, spin and temperature data selected at the start-up of the program will remain selected. “End” will appear on the display.

5 Maintenance and cleaningDetergent DrawerRemove any powder residue buildup in the drawer. To do this;1. Pressthedottedpointonthesiphoninthe

softenercompartmentandpulltowardsyouuntilthecompartmentisremovedfromthemachine.

C Ifmorethananormalamountofwaterandsoftenermixturestartstogatherinthesoftenercompartment,thesiphonmustbecleaned.

2. Washthedispenserdrawerandthesiphonwithplentyoflukewarmwaterinawashbasin.

3. Replacethedrawerintoitshousingaftercleaning.Checkifthesiphonisinitsoriginallocation.

Inlet water filtersThere is a filter at the end of each water intake valve at the back side of the machine and also at the end of each water intake hose where they are connected to the tap. These filters prevent the foreign substances and dirt in the water to enter into the machine. Filters should be cleaned as they get dirty.• Closethetaps.

• Removethenutsofthewaterintakehosestocleanthesurfacesofthefiltersonthewaterintakevalveswithanappropriatebrush.

• Ifthefiltersareverydirty,youcanpullthemoutbymeansofpliersandcleanthem.

• Takeoutthefiltersontheflatendsofthewaterintakehosestogetherwiththegasketsandcleanthoroughlyunderstreamingwater.

• Replacethegasketsandfilterscarefullytotheirplacesandtightenthehosenutsbyhand.

10 - EN

bypullingouttheplugattheendofthehose.Iftheamountofwatertobedrainedoffisgreaterthanthevolumeofthecontainer,replacetheplug,pourthewaterout,thenresumethedrainingprocess.

• Afterdrainingprocessiscompleted,replacetheplugintotheendofthehoseandfitthehosebackintoitsplace.

If your product is not supplied with an emergency drain hose, do the following as shown in the figure below:

• Placealargecontainerinfrontofthefiltertoreceivewaterflowingfromthefilter.

• Loosenpumpfilter(anticlockwise)untilwaterstartstoflowoutofit.Directtheflowingwaterintothecontaineryouhaveplacedinfrontofthefilter.Youcanuseapieceofclothtoabsorbanyspilledwater.

• Whenthereisnowaterleft,turnthepumpfilteruntilitiscompletelylooseandremoveit.

• Cleananyresiduesinsidethefilteraswellasfibers,ifany,aroundthepropellerregion.

• Ifyourproducthasawaterjetfeature,besuretofitthefilterintoitshousinginthepump.Neverforcethefilterwhilereplacingitintoitshousing.Fitthefilterfullyintoitshousing;otherwise,watermayleakfromthefiltercap.

4- Close the filter cap.Close the two-piece filter cap of your product by pushing the tab on it.Close the one-piece filter cap of your product by fitting the tabs on the bottom into their positions and pushing the upper part of it.

Draining any remaining water and cleaning the pump filterYour product is equipped with a filter system which ensures a cleaner water discharge that extends pump life by preventing solid items such as buttons, coins and fabric fibers from clogging the pump propeller during discharge of the washing water.• Ifyourmachinefailstodrainthewater,

thepumpfiltermaybeclogged.Youmayhavetocleanitevery2yearsorwheneveritisplugged.Watermustbedrainedofftocleanthepumpfilter.

In addition, water may have to be drained off completely in the following cases:• beforetransportingthemachine(e.g.when

movinghouse)• whenthereisthedangeroffrostIn order to clean the dirty filter and discharge the water;1- Unplug the machine to cut off the supply power.ATheremaybewaterat90°Cinthe

machine.Therefore,thefiltermustbecleanedonlyaftertheinsidewateriscooleddowntoavoidhazardofscalding.

2- Open the filter cap. The filter cap may be composed of one or two pieces according to the model of your machine.If it is composed of two pieces, press the tab on the filter cap downwards and pull the piece out towards yourself.If it is composed of one piece, hold it from both sides and open it by pulling out.

3- An emergency drain hose is supplied with some of our models. Others are not supplied with this item.If your product is supplied with an emergency drain hose, do the following as shown in the figure below:

• Pulloutthepumpoutlethosefromitshousing.

• Placealargecontainerattheendofthehose.Drainthewateroffintothecontainer

11 - EN

6 Solution suggestions for problemsCause Explanation / SuggestionProgramcannotbestartedorselected.

• Machinemayhaveswitchedtoselfprotectionmodeduetoaninfrastructureproblem(suchaslinevoltage,waterpressure,etc.).

• Resetyourmachinebypressing“Start/Pause/Cancel”buttonfor3seconds.(see,CancelingaProgram)

Thereiswatercomingfromthebottomofthemachine.

• Theremightbeproblemswithhosesorthepumpfilter.

• Besurethesealsofthewaterinlethosesaresecurelyfitted.

• Tightlyattachthedrainhosetothetap.• Makesurethatthepumpfilteriscompletely

closed.Machinestoppedshortlyaftertheprogramstarted.

• Machinecanstoptemporarilyduetolowvoltage.

• Itwillresumeoperatingwhenthevoltageisbacktothenormallevel.

Itcontinuouslyspins.Remainingtimedoesnotcountdown.(Formodelswithadisplay)

• Theremaybeanimbalanceoflaundryinthemachine.

• Theautomaticspincorrectionsystemmighthavebeenactivatedduetotheunbalanceddistributionofthelaundryinthedrum.

• Thelaundryinthedrummaybeclustered(bundledlaundryinabag).Laundryshouldberearrangedandre-spun.

• Nospinningisperformedwhenthelaundryisnotevenlydistributedinthedrumtopreventanydamagetothemachineandtoitsenvironment.

Itcontinuouslywashes.Remainingtimedoesnotcountdown.(Formodelswithadisplay)

• Inthecaseofapausedcountdownwhiletakinginwater:

• Timerwillnotcountdownuntilthemachineisfilledwiththecorrectamountofwater.

• Themachinewillwaituntilthereisasufficientamountofwatertoavoidpoorwashingresultsduetolackofwater.Thenthetimerwillstarttocountdown.

• Inthecaseofapausedcountdownattheheatingstep:

• Timewillnotcountdownuntiltheselectedtemperaturefortheprogramisreached

• Inthecaseofapausedcountdownatthespinningstep:

• Theremaybeanimbalanceoflaundryinthemachine.

• Theautomaticspincorrectionsystemmighthavebeenactivatedduetotheunbalanceddistributionofthelaundryinthedrum.

• Thelaundryinthedrummaybeclustered(bundledlaundryinabag).Laundryshouldberearrangedandre-spun.

• Nospinningisperformedwhenthelaundryisnotevenlydistributedinthedrumtopreventanydamagetothemachineandtoitsenvironment.

Thereisfoamingoverthedetergentdrawer

• Toomuchdetergentwasused.• Mix1tablespoonfulsoftenerand½literwater

andpourintothemainwashcompartmentofthedetergentdrawer.

12 - EN

WM5

5

84

60

45

60

220-240 V / 50Hz

10

2000-2350

1000

7 Specifications

Specifications of this appliance may change without notice to improve the quality of the product. Figures in this manual are schematic and may not match your product exactly.

Values stated on the machine labels or in the documentation accompanying it are obtained in laboratory in accordance with the relevant standards. Depending on operational and environmental conditions of the appliance, values may vary.

Models

Maximumdrylaundrycapacity(kg)

Height(cm)

Width(cm)

Depth(cm)

NetWeight(±4kg)

Electricity(V/Hz.)

TotalCurrent(A)

TotalPower(W)

Spinningcycle(rpmmax.)

Thisappliance’spackagingmaterialisrecyclable.Helprecycleitandprotecttheenvironmentbydroppingitoffinthemunicipalreceptaclesprovidedforthispurpose.Yourappliancealsocontainsagreatamountofrecyclablematerial.Itismarkedwiththislabeltoindicatetheusedappliancesthatshouldnotbemixedwithotherwaste.Thisway,theappliancerecyclingorganisedbyyourmanufacturerwillbedoneunderthebestpossibleconditions,incompliancewithEuropeanDirective2002/96/EConWasteElectricalandElectronicEquipment.Contactyourtownhalloryourretailerfortheusedappliancecollectionpointsclosesttoyourhome.Wethankyoudoingyourparttoprotecttheenvironment.

13 - EN

14 - EN

Congratulations on your new purchase and thank you for choosing a brand supported by Home Appliances Pty Ltd.

Our friendly Customer Care team will take care of your every enquiry. Please ring 1800 444 357 or email customercare@hapl.com.au

Please be aware of the terms and conditions following.

P R O O F O F P U R C H A S EProof of purchase will be required for the validation of all warranty claims. Documents suitable for proof of purchase include, but are not limited to the following:

Delivery dockets; Retailer or supplier invoices; Kitchen cabinet invoices that incorporate appliances; Credit card statements where the purchase of the appliances are clearly depicted.

The inability to provide proof of purchase will lead to the claim being treated as a service call with labour and parts costs being born by the claimant. It is recommended to attach any supporting documentation to this warranty card and keep in a safe place for future reference.

NOTE: There is no need to return this or any other warranty card to Home Appliances Pty Limited. Proof of purchase is the only requirement for warranty claim, please keep a copy of the purchase receipt with this warranty card.

W A R R A N T Y T E R M S & C O N D I T I O N S

F O R A U S T R A L I A O N L Y

This warranty is in addition to your normal statutory entitlements and specific legal rights. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law as prescribed and set out in regulation 90 of the Competition and Consumer Act 2010.1 Home Appliances Pty Limited warrants this appliance to

the original purchaser against defective materials and workmanship for a period of 24 months of ownership, that any part with defective material be replaced free of charge, provided that all service work is carried out by Home Appliances Pty Limited or nearest appointed service agent.

3 months warranty (Non Domestic USE) Regardless of the product type, warranty of appliances

installed and operated in a non domestic installation, such as an office or factory etc., is limited to Three (3) Months from date of purchase.

NOTE: Portable Appliances such as Benchtop cook tops are NOT covered for In House servicing, call Customer Care on 1800 444 357 to discuss servicing of this type of appliance.

2 If the residence housing the appliance is outside of a service area of Home Appliances Pty Ltd, the owner will bear over and above associated costs.

These over and above costs relate to:(i) Travel costs by an authorised service agent for Home

Appliances Pty Ltd.(ii) Transportation of the appliance to and from to the nearest

Home Appliances Pty Ltd authorised service agent.Transportation of an appliance will be at the owner’s cost and risk if not done so by an authorised service agent.

3 If there is a defect in the materials or workmanship during the period of this warranty, Home Appliances Pty Limited will, at its discretion and subject to the following terms and conditions, repair or replace free of charge the component or appliance. Replacement of the appliance under the terms of this warranty does not give right to extension or a new beginning of the period of warranty.

4 Home Appliances Pty Limited is not liable for any other loss other than the appliance itself.

5 This warranty does not cover the following circumstances:(i) An act or acts of God, any natural occurrence or other

circumstances not within the control of Home Appliances Pty Limited (such as fire, storm or water damage).

(ii) An attempt by any person (other than an employee or authorised service agent of Home Appliances Pty Limited to repair or modify the appliance.

(iii) Where the rating plate has been removed or any details on that plate have been rendered illegible.

(iv)*If the appliances have been installed, operated or maintained in a manner that is not in accordance with the instructions supplied by Home Appliances Pty Limited.

(v) If product failure is the result of connection to a power supply that does not correspond to that shown on the ratings plate or if the power supply is inadequate or faulty.

(vi) Normal wear and tear, misuse or damage to the appliance or use of the appliance in a manner for which it was not intended.

(vii) Failure of electrical components due to power surges or outages.

(vii) Home Appliances Pty Limited will not be obliged to comply with its obligations under this Warranty until you have paid the full purchase price for the appliances.

* For Washing machines this includes removal of packaging material and rear packing bolts where applicable.

6 The warranty does not extend to cover:(i) Discoloured burners or trivets on gas cooktops or chrome

surrounds on electric cooktops(ii) Discolouration caused by steam, heat or venting during

normal use(iii) Plastic or enamel components(iv) Light globes, filters or any consumables(v) Insect or vermin infestation(vi) Corrosion where the product is located within a corrosive

environment 7 Home Appliances Pty Limited excludes all warranties and

conditions that may be implied into this Warranty or the Contract for Supply and limits it’s liability for a breach of any implied condition or warranty that cannot be excluded to the greater of (at Home Appliances Pty Limited option):(i) For goods, repairing or replacing those goods or paying for

the cost of those goods repaired or replaced;and(ii) For services, resupplying the services or paying for the

cost of having those services resupplied.8 Proof of purchase will be required for the validation of all

warranty claims.

9 Our goods come with guarantees that cannnot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any reasonanly forseeable loss or damage. You are also entitled to have the goods repaired if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Built-In & Freestanding AppliancesAccess must be granted within normal working hours and our Service Agents must have easy access to these appliances. Any charges will be the responsibility of the purchaser where the service technician cannot obtain easy access to remove the appliances for inspection prior to repair.

HA

PL_

2016

003

HA

PL

War

rant

y C

ard

Upd

ate

2YR

11_

16