Date post: | 24-Oct-2014 |
Category: |
Documents |
Upload: | rajani-singh |
View: | 119 times |
Download: | 9 times |
Background of the study
Malaysia is basically a domestic market-oriented and in four wheeler section it is basically a
passenger car market because the economic status is not so good so that people can have
luxury cars. The objective of this study is to find the reason why Proton could not survive in
the market after the entry of its local rival and the reason it lost its core competency and then
suggesting some measures to build its core competencies again with some suitable strategy.
Introduction
PROTON was established on May 7, 1983. Till 1993 it remained the sole Malaysian
Automobile manufacturer and then there was an existence of its only local rival Perodua.
Proton has a head-quarter in Subang Jaya and Shah Alam and a manufacturing plant in
Tanjung Malim, Perak.
Its main products are the Waja, Iswara, Arena, Satria GTi, Wira Inspira, Exora, Saga FL,
Persona. SAGA was and is still the famous product. The current capacity of its main plant is
240 000 vehicles per annum.
Source-http://www.slideshare.net/mandalina/marketing-plan-proton
The key management people are Syed Zainal Abidin (Managing Director), Dato’ Sri Mohd
Nadzmi Mohd Salleh (Chairman), Dato’ Michael Lim Heen Peok (Independent Non-
Executive Director), Dato’ and Mr. Behara Venkata Rama Subbu, (Independent Non-
Executive Director).
It currently has operation in 27 countries across the world that includes Australia, China,
South Africa, and the United Kingdom. Its total revenue (profit) on last quarter (30th June,
2011) was around RM4.55million.
The vision and mission of proton
The PROTON's vision is to become a regionally competitive automotive company, creating
value by earning customers' trust through the quality and innovation of our products and
people. To realize this vision they are aligned to engage more and more innovative people
who are fresh and ready to produce new ideas.
APIIT SD INDIA 1
The mission of Proton is to facilitate each and every employee of Proton a retirement benefit
to its members through their savings.
Goals and objectives
The main goal of Proton is to further strengthen its global presence in the world automobile
market.
One of the main objectives for the creation of Perusahaan Otomobil Nasional Berhad
(PROTON) was to propel Malaysia into the 21st century and it is still aligned to achieve it.
Forecast from proton
PROTON is forecasting to command at least a 4% share of Brunei’s car market with the
Total Industry Volume (TIV) in 2011 projected at between 12,000 and 13,000 units. It is also
going to launch its hybrid vehicle with revised technologies (Dato’ Haji Syed Zainal, 2011).
Key issues
When Proton was new to Malaysia it was very successful even with its old and repeated
technology as it has no local competitor till then but as the competition became global and its
local rival entered the Malaysian market it failed in the merger with Lotus, Mitsubishi and
many others only because of its old and poor technology transfer and old R&D. and higher
price of its products also increased competition for it as the customers were attracted to
Perodua, its local rival that produced comparative lower price cars with a good average in
quality. It also launched and established many subsidiaries to grow its market but again it was
a failure.
The need to revamp the strategy
As all of its merger and acquisition failed because of its poor technology transfer and all of its
subsidiaries didn’t work, it really needs to revise its strategy because gone are the days when
people loved there old same technology now a days they are more demanding and it has
increased the competition and even take it to the global level. There was a 94.6% year-on-
year drop in net profit if compared to last year (net profit of RM84.68mil).
APIIT SD INDIA 2
These all above thing shows that Proton should and must revamp its strategy if it really wants
to be sustainable in the market.
EXTERNAL ANALYSIS OF ENVIRONMENT
PROTON’S competitors
Competitors are those organizations which provide similar goods or services to the same set
of customers or that vie for the same resources needed by the organization. Most
organizations have at least one competitor (usually more than one) and must consider all
potential competitors. (Miller Frederic P, 2009).
After 10 years of Proton establishment its new local rival entered the market with good fuel
efficient cars. That was a big threat to Proton. It provided multipurpose vehicles to fulfill the
different needs of Malaysian customers. It also had an engineering legacy from Daihatsu
which is a Japanese car manufacturer.
Market research proved that Perodua was a little ahead in quality in upholstery, engine
efficiency and reliability of electronics compared to Proton.
Other than local rival Toyota is its global competitor who is the only one in automotive
industry which is having LEAN manufacturing
Now it becomes very much important to formulate some strategy for Proton so that it can
survive in the market.
PEST ANALYSIS
Political:
Government of Malaysia is trying to restructure their automotive industry market by
encouraging the production of a large number of cars to meet growing demand of consumers.
Government of Malaysia is also providing a 50% refund on excise tax for domestic
automakers. Other than that Malaysia has some political policies in favor of car producers:
1) AFTA: that maintains the tariffs barrier of the Southeast Asian countries.
APIIT SD INDIA 3
2) Export Policy: to protect local car manufacturer.
3) Protectionism policy: to protect local car manufacturer from an unhealthy competiton from
outside the domestic boundary.
ECONOMIC:
1) Deregulated market
2) The ever increasing cost of manufacturing and raw materials
3) Limited resources: increases price
4) Negative GDP ( -2.8 in 2011),
Source: http://www.tradingeconomics.com/malaysia/gdp-growth
5) Increased inflation (3.4 in 2011),
Source: http://www.tradingeconomics.com/malaysia/inflation-cpi
6) Increased monetary policy (3.4 in 2011),
Source-http://www.centralbanknews.info/2011/03/monetary-policy-week-in-review-
12-march.htm
7) Unemployment rate is increased (3.3 in October 2011)
Source-http://www.tradingeconomics.com/malaysia/unemployment-rate
Social:
The growing population in the country is one of the factors which can affect the
automobile industry. The total population of Malaysia is 28,728,607 (July 2011). This will
give a greater number of markets.
The ratio of car ownership is high as people consider cars as important thing in their lives.
People are expected to put off buying different motor vehicles because of the employment
market uncertainty because of the global and local financial crisis.
The impact of the image to the loyalty of the customer is also another factor.
TECHNOLOGY:
Intellectual property: because it is considered as a sign of authenticity and uniqueness.
Due to the different technologies, primarily the help of computer and the Internet, the
potential for innovation and development is increasing.
Technologies that help to survive in competition.
APIIT SD INDIA 4
PEST analysis is the tool to know the current opportunities that can be utilized or the threats
that can be overcome.
OPPORTUNITIES
An opportunity provides what exactly a business wants to survive in the given environment.
High Demand for Fuel Efficient Vehicles,
Opportunity to grow globally.
Future economies of scale and innovation through cooperative ventures.
Strategic alliances and joint ventures..
The entry of Danish vehicle tuner Kleeman could provide a boost for the premium
Vehicle segment.
THREAT
Threats are key impediments to the firm's current or desired position. Costly Raw Material,
Price war between competitors.
Competitors - local & international brands.
Legal and Political Framework,
Economic downturn – decrease of car sales,
Increased bargaining power of key buyers or suppliers,
INTERNAL ENVIRONMENT ANALYSIS:
STRENGTHS
Strength is a resource advantage which is only with you and not with your competitors.
Financial background of proton is strong.
Extensive nationwide distribution network.
Good corporate governance.
Influence of patriotism as Proton is national car-maker.
Government support.
Strong brand
Weakness
APIIT SD INDIA 5
A weakness is a "limitation or deficiency in one or more resources or competencies relative
to competitors that impedes a firm's effective performance".
Reputation of poor product performance and functionality.
High cost to expand their operation by advanced technology.
Spare parts are expensive.
Vulnerable to increasing material cost (steel, etc).
After sales, service is poor.
Limited product line.
It has some debts,
CORE COMPETENCIES
With about ten-year history of carrying out a variety of projects, V-ENS distinctly
differentiated itself with superior technology, wide-ranging experience, cutting-edge
infrastructure, and a broad distribution network. In addition, it had world-class car
engineering experts with exceptional expertise and a wealth of hands-on background but after
the entry of its local rival it faded over time and Proton lost its core competency as core
competency is a thing which cannot be copied by anyone else and it helps in sustaining long
term competitive advantages over rivals.
It becomes very clear that Proton currently has no core competency it only has noncore
strategic capabilities that indicates it should move on to have new strategy to convert its
capabilities into core- competencies.
STRATEGY ALTERNATIVE AND RECOMMENDATION
TOWS Analysis: (Figure 3)
APIIT SD INDIA 6
A TWOS Analysis is a strategic planning tool used to evaluate the Threats, Opportunities and
Strengths, Weaknesses, involved in a project or in a business venture or in any other situation
requiring a decision.
http://mba.zainbooks.com/terms/management/threats-opportunities-weaknesses-strengths-
tows-matrix.shtml
Internal environment
External
environment
Internal Strengths
1) Financial background of proton is strong2) Extensive nationwide distribution network3) Influence of patriotism as Proton is national car-maker.
Internal weakness
1) Reputation of poor product
performance and functionality
2)High product cost3)Spare parts are expensive
No fuel efficiency, gas linkage,
3) If cost is low quality
automatically becomes low,
4) Lack of R&D.
5) Bad international connections.
External opportunity
To grow their business globallyHigh demand of the products
R&D development
1) Opportunity to develop new market in Egypt.
2) To have partnership in those country where raw materials are comparative low in price,
3)
SO (strengths and opportunities)
1) Develop and produce the products through the TQM (reduce the cost and increase the quality at greater speed),
2) Financially strong background of proton helps to develop its R&D. (FUNCTIONAL LEVEL STRATEGY)
2) With the high demand of product Proton can sell its product globally.(INTERNATIONAL LEVEL STRATEGY)
WO (weakness and opportunities)
1) Proton should collaborate with other company to improve its product performance. (BUSINESS LEVEL STRATEGY)
2) It has the opportunity to produce new less fuel efficient car (Functional level),
External threats
Economic downturn – decrease of car sales.A lot of substitute products in
market.
Threats of new entrants, at local as well as global level,Expansion in technology,
ST (strength and weakness)
• Due to down turn in
economy the sale of
automotive products
decrease and to enhance the
sale of its products proton
has to decrease the price of
WT (weaknesses and threats)
• Tie up with another
company to launch a hybrid
Car.
(BUSINESS LEVEL
STATEGY)
• By joint venture with
APIIT SD INDIA 7
its product its can’t effect
much to proton because it is
financially strong.
(BUSINESS LEVEL
STRATEGY)
Due to patriotism in Malaysia
market its substitute products could
not affect much to Proton’s sale..
another company proton can
improve the quality of
products, it helps to build a
broad network.
According to TOWS analysis:
• The main concern of proton is to compete globally so it can have some strategy to
overcome on threats and weakness by using strengths and opportunities.
Alternative strategy generation
Here the reader did some more different analysis’s like Gap analysis, BCG matrix, porter’s 5
forces framework, key drivers of changes to produce clearer result in formulating strategy
and these are:
Tows matrix: To attract customers at local and global level proton needs to have a cost
cutting strategy to sell its products at low price as it is financially strong it can’t effect much
to proton but its sale enhance in this period of economic downturn period.
Pest (figure 1): As per PEST analysis Proton must have a specific market development by
introducing new improved product to the new market and also by providing it to local market
too to hold a command on local it and it involves investment to have a new product line up.
BCG matrix (appendix 3): According to BCG matrix proton fall under question mark
(problem child) stage .After studying the strategic position of proton the reader came to know
that its market is growing but its market share is not increasing too much. Due to some
weakness (lack of technology, quality prospective, lack of attractive design, financial
prospective,) the market is not growing rapidly.
APIIT SD INDIA 8
like having joint venture with Toyota to know about the secret involved in its lean
manufacturing as TOYOTA is the first one to introduce this strategy and it took almost 10
years. This is the key for TOYOTA’S success.
Porter’s 5 forces (appendix 4): According to this Proton can have multi domestic strategy
(international level) that could further involve lean manufacturing. This could help in
achieving high local responsiveness by providing customers what they exactly want and thus
cost cutting by the help of lean manufacturing to reduce initial cost that would help in having
a good savings.
Balance score card: Balance score card suggests that Proton should have product
development by the help of new technologies and changing its older one then again providing
them to general public to achieve maximum growth.
RECOMMENDED STRATEGY
Proton’s current strategies that could not help it to survive in increasing competition are:
maiden multi-purpose vehicle, Total product Management, Electric Vehicle,
APIIT SD INDIA 9
Now the main objective of this paper after having all the analysis would be formulating a
strategy that could not only support its current strategy to further improvement but also helps
it to have a competitive advantages over its rival that would include converting its capabilities
into core-competencies.
It would be recommended to proton that it should have a lean manufacturing that would not
only help it in waste management throughout the production process but also help it to make
a base for further future strategy as it changes all the initial process of production hat can lead
to waste of money, time, energy and resources.
For having this strategy Proton can have a joint venture or partnership with TOYOTA, as it
would take a long time and more money to have a lean manufacturing by oneself. TOYOTA
took almost 10 years to introduce it.
So Lean manufacturing would be the best suitable option for Proton to improve its current
position it can also use other defined strategy to have a little support.
CONCLUSION
Proton was considered as the national car manufacturer of Malaysia. However due to the
different factors, primarily the implementation of AFTA, the sales and market share of the
company declined. In details, the growing competition enabled the Malaysian market to have
a wide choice of cars to be availed. On the other hand, due to the strong support of the
government, as well as the strong position of the company in the market, it can be said that
the company failed to focus on the most important aspect of a company in order to maintain
competitive advantage, and that is innovation. A side from that, the company is also having a
problem in their supply chain, which results to high pricing of Proton's car compare to other
international brand in the market. In order to solve the current situation of the company, it
will be important to focus on lean manufacturing process. It would also be important to focus
on the HR aspect of the company in order ensure that the company has talented and skilled
staffs to develop new and better products that will suit the ever changing preferences of the
consumers.
APIIT SD INDIA 10
Even if Proton has changed its product line up very impressively, but it would include much
work for it to avail strong competitive advantage over its rival. A total of 240 acres of land
area is being developed for Proton Manufacturing Plant in Phase- It would be necessary to
have a good R&D to have new improved passenger cars that would suit the customer
preferences, it will also be important to focus on differentiation of the products having a good
watch to its competitors so that it can keep itself updated.
REFERENCES
BOOKS AND JOURNALS
1. Chung, W., & Kalnins, A. (2001). Agglomeration effects and performance: Test of the
Texas lodging industry Strategic Management Journal, 22, 969–988.
2. Hax, A. & Wilde II, D. (2003). ‘The Delta Model- A New Framework of Strategy’.
Journal of Strategic Management Education, vol. 1, no. 1. Available from:
http://pesona.mmu.edu.my/~wruslan/MISP2/Readings/detail/Reading-37.pdf.
3. Kotler, P. and Keller, K.L. (2009). Marketing Management (pp 53, 77-84) New Jersey:
Pearson Prentice Hall
4. Nijssen, E. J. & Frambach, R. (2000). Creating Customer Value Through Strategic
Marketing Planning: A Management Approach. Springer
APIIT SD INDIA 11
5. Prahalad, C. K., and Hamel, G. (1990). The core competence of the organization.
Harvard Business Review, 90, 79–93.
ONLINE JOURNALS
1. Strategic Management, Available:
http://www.emeraldinsight.com/products/journals/journals.htm?id=jsma Last
accessed: 25th Oct,2011
ARTICLES AND PRESS RELEASES
1. Measures To Increase Competitiveness, Available:
http://www.miti.gov.my/cms/content.jsp?id=com.tms.cms.article.Article_e8890212-
7f000010-16251625-e40fbc3f Last accessed 07th Nov,2011
2. Official Press Release, Available: http://www.protonbrunei.com/12-05-2011-official-
press-release-proton-appoints-united-motors-as-its-new-importer-and-reseller-in-
brunei/396/ Last accessed: 10th Oct,2011
3. Proton Considering Hm Plant To Assemble, Available:
http://www.cardekho.com/india-car-news/proton-considering-hm-plant-to-assemble-
cars-in-india-3528.htm Last accessed 07th Nov,2011
4. Value Chain Analysis Of Proton, Available:
http://www.oppapers.com/subjects/value-chain-analysis-of-proton-holding-berhad-
page20.html Last accessed: 05th Nov,2011
WEBSITES
1. Annual Reports, Available: http://www.proton.com/pdf/AnnualReports/2010AnnualReport.pdf Last accessed: 15th
Sept,20112. Business Strategy, Available: http://tutor2u.net/business/strategy/ansoff_matrix.htm
Last accessed: 06th Sept,2011
3. Proton, Available: www.proton.com Last accessed: 25th Aug,2011
4. Proton, Available: www.proton-edar.com.my Last accessed: 25th Sept,2011
APIIT SD INDIA 12
APPENDIX
EXTERNAL ENVIRONMENT ANALYSIS
APPENDIX 3: SWOT Analysis
Internal analysis: SWOT
STRENGHTS:
• Financial background of proton is strong
• Extensive nationwide distribution network
• Influence of patriotism as Proton is national
car-maker Leading car market in Malaysia,
• It has developed a hybrid vehicle technology
on its own,
WEAKNESSES
• Reputation of poor product performance
and functionality
• High product cost
• Spare parts are expensive It has some
pending Litigations
• Failure in technology transfer,
• fuel efficiency is very bad,
OPPORTUNITIES
• To grow their business globally
• High demand of the products
• R&D development
• Demand of Fuel Efficient Vehicles,
THREATS
• Economic downturn – decrease of car
sales.
• A lot of substitute products in marke
• Threat of new rivals entering the market,
• Slow market growth,
APPENDIX 4: Porter’s 5 Forces Framework
Due to competitive environment and economic recession proton has threat from new and
existing rivals. The demand for cost efficient car is increase and by collaboration with
another company to produce hybrid cars, helps proton to overcome to its competitors.
PORTER’S FIVE FORCES TO ANALYSE PROTON:
Threat of New Entry,
Threat of Substitutes,
APIIT SD INDIA 13
Bargaining Power of Suppliers,
Bargaining Power of Buyers,
Intensity of Rivalry:
The structure of competition – new rivals entering into market.
The structure of industry costs – competitors have cost cutting and provides comparative
low cost cars.
Strategic objectives – its new competitor does not have any aggressive growth strategies as
it needs a lot of investment.
Degree of differentiation – differentiated product have a big demand. Proton can have a less
rivalry by differentiating its product (Hybrid, electric cars)
Exit barriers – for an automobile industry barriers to leaving is much high and thus it can
produce more rivalry
APPENDIX 5: BCG Matrix
One of the most common and long-standing way of conceiving of the balance of portfolio of
businesses is in terms of the relationship between market and share and market growth
identified by Boston Consulting Group (BCG). (Gerry/Kevan/Richard,2008).
APIIT SD INDIA 14
MARKET SHAREHIGH LOW
INTERNAL ENVIRONMENT ANALYSIS:
APPENDIX 7: Benchmarking
Type Description Most Appropriate for the Following
Purposes
Strategic
Bench -
marking
By having lean manufacturing to
improve overall performance.
A newly shifted American strategist
would help it in long term growth.
Performance
Bench -
By having a successful merger or
acquisition with the help of new
By closing performance gap.
APIIT SD INDIA 15
MA
RK
ET
GR
OW
TH
LO
W
HIG
H
STARS
Market growth is high but market
share is low so not in this
category. But it can use its
question mark position to reach
up to this level.
QUESTION MARKS
Car market is increasing but market share
of Proton is not increasing thus it falls
under this category, it can invest more to
cut its cost so that it can increase its
market share to move itself to STAR.
CASH COW
Market growth is high and market
share is low, so it does not fall
into this box.
DOG
In this category Proton should invest
more on those product that are very old in
technology and have poor performance,
as it is bringing up new version of Exora
(Exora 2)
marking technology transfer.
Process
Bench -
marking
Lean manufacturing that includes a
betters R&D to change its entire
production process to achieve short
term benefits in short period of time.
Waste management and cost cutting.
Functional
Bench -
marking
Cost reduction through improved R&D
or by introducing lean manufacturing.
Competitor cannot easily copy it as it
involves a lot of money as well as time.
Internal Bench -marking
A good improved staffs communication
so the access to sensitive data and
information would be easier.
Good training to all the staff of the
organization
External
Bench -
marking
Analyzing its competitor’s position to
work accordingly and by utilizing
opportunities when they knock the
door.
By having partnership with other good
car manufacturer.
International
Bench -
marking
By finding other business partners
outside the domestic boundary as there
is a less chance to find good one inside
the domestic side.
By globalization of its product that
involves market development.
APPENDIX 14: Balance Score Card Analysis
Balanc
e
Scorec
ard
Shareholder Look Operational
Effectiveness
Organizational
Learning
Customer
targeting
Proton a)A good shareholder a) a new developed a)new a) enhancing
APIIT SD INDIA 16
number as every
single person in
Malaysia has the car
from Proton.
b) Revenue and
turnover by
geographical segment
(Asia, Europe, Middle
East, Africa and
Pacific).
c) Revenue from
businesses such as
capital, industrial and
government.
technology,
b)first to introduced
its own design,
b) Technology in the
R&D and auto
development
technology has
increased its
percentage
sales, b)
providing
training to all of
its staff to
improve further.
after sale
services,
c) Customer
satisfaction
by taking
feedback
from the to
improve
Strategic and Integrated Partner companies
a) Volume, revenue, turnover, gross margin by individual client b) Year over year sales and turnovers growth by individual clients. c) new improved technology
a) Costly to have a new technology
b) cost to serve clients.
a) Number of clients on each country and partner. c) Return on % revenue on the center of excellence establishment
a) Customer satisfaction by good quality at a comparative price, b) Joint revenue and turnover from complementary relationship
APIIT SD INDIA 17