1
6” LATHE ACCESSORIES (INCLUDES CRAFTSMAN) 10” AND 12” LATHE ACCESSORIES (INCLUDES CRAFTSMAN) #7-805-0552 $450.50 3-Jaw Universal Chuck, 1-1/2”-8 tpi, 5” dia. #7-805-0652 $615.78 3-Jaw Universal Chuck, 1-1/2”-8 tpi, 6” dia. #7-850-0600 $525.00 4-Jaw Independent Chuck , Flat back, 6” dia. #7-871-062 $89.70 6” Backplate 1-1/2 x 8 tpi #7-850-0800 $522.50 4-Jaw Independent Chuck, Flat back, 8” dia. #7-871-082 $103.50 8” Backplate 1-1/2 x 8 tpi #601243 $102.95 Drill Chuck 0-1/2” capacity #7-052-206 Chuck Arbor $7.50 #6821 POR Steady Rest for 12” only: A rigid support for accurately machining long pieces. #6626 POR Follower Rest for 12” only. For work on long, slender rods. #365 POR Faceplate: 1-1/2”-8tpi, 8-1/2” slotted. #15 POR Faceplate 1-1/2”-8tpi 6” slotted. TOOLHOLDERS Accept 1/4” bits #250-1312 Straight $20.50 #250-1352 Left Hand $20.50 #250-1382 Right Hand $20.50 #386 $77.00 SALE $39.95 Cutter Bits: six HSS ready-ground cutter bits; LH turning and facing, RH turning & facing, round nose, 60? V-thread. #990 POR Boring Tool Holder mounts in tool post, Holds 3/16”, 1/4”, 5/16”, and 3/8” dia. tools. Boring Tools #6602 5/16” Boring POR #6603A 1/4” Boring POR #6604 3/16” Boring POR #6605 1/4” Internal Thread POR #380 POR Tool Post tool set includes: 3/8” external 60? V-threading; 3/8” external turning; 1/4” internal threading; 3/8”, 5/16”, 1/4”, 3/16” boring; V-block; 2 height spacers. #6818 POR Metric Threading Attachment: 12 change gears for cutting metric threads from .25 to 7mm. PAGE 41 Please provide Serial Number and Model Number when ordering. #7-805-0451 $428.82 3-Jaw Universal Chuck 2 sets of jaws, 1”-10tpi, 4” dia. #7-850-0300 $420.50 4-Jaw Independent Chuck, Reversible jaws, flatback, 3-1/2” diameter #7-871-041 4” Backplate 1”-10tpi $78.80 #10102 POR Drill Chuck Kit: 1/2” chuck, arbors MT-1, MT-2 #M6-365 POR Faceplate: 4 slots in faceplate will hold work or drive a lathe dog. 5-1/4” dia. #10105 POR Steady Rest: a rigid support for machining long pieces. #M6-395 POR Follower Rest: insures accurate work on long slender rods. #7-565-001 $93.40 Live Center MT-1: single ball bearing center, test within .005 #7-555-005 $11.10 60 degree Tailstock Center, MT-1 shank #7-555-010 $13.20 60 degree Headstock Center, MT-2 shank #7-405-005 $16.50 Adaptor for MT-1 to MT-2 #7-565-002 $126.36 MT-2 Live Center, ball bearing, for high speed turning. #7-555-010 Headstock Center, 60? $13.20 #945 POR Milling Cutter Holder with Drawbar: holder secures milling cutters in headstock spindle. Holds 1/2” shank tools. #500-A POR Milling Attachment: For face milling, cutting keyways and slots, milling dovetails making dies, molds, etc. #725 POR Cross Slide Stop: clamps to cross slide dovetail. #6810 POR Carriage Stop: clamps on front bedway. Also fits 6” lathe. #6822 POR Taper Attachment: cut tapers up to 6” long at one setting. #750 POR Collet Chuck Handwheel Type: includes draw-in tube, sleeve, nose cap, use with 3AT collets. Many Atlas items are POR “Price on Request” M6-990 POR Boring Tool Holder mounts in tool post. Holds 3/16”,1/4”, 5/16”, and 3/8” diameter tools. BORING TOOLS #6602 5/16” Boring POR #6603A 1/4” Boring POR #6604 3/16” Boring POR #6605 1/4” Internal Thread POR THREADING GEARSETTES #10111 POR For cutting 5, 6, 8, 9, 10, 11, 11-1/2, 12, 13, 14, 16 threads per inch. #10112 POR For cutting 16, 18, 20, 22, 24, 27, 28, 32 threads per inch. #10113A POR For cutting 32, 36, 40, 44, 48, 56, 64 threads per inch. FEEDING GEARSETTES #10114A POR .0064”, .0055”, .0048 per spindle revolution. #10115 POR .0042” and .0036” per spindle revolution. #10116 POR .0024” per spindle revolution. #10118A Set of 6 Gearsettes POR Consists of one each: #10111, #10112, #10113, #10114, #10115, #10116. #46-439 POR Cup Center for Woodturning, MT-2 shank #80101 POR Spur Center for Woodturning for driving work mounted between centers, MT-2 #M6-945 POR Milling Cutter Holder with Drawbar: holder secures milling cutters in headstock spindle. Holds 1/2” shank tools. #M6-500 POR Milling Attachment: Equips lathe for face milling, cutting keyways and slots, milling dovetails, squaring shafts, making dies,, etc. #6810 POR Carriage Stop: clamps on front bedway. Also fits 10” and 12” lathes. TOOLHOLDERS Accept 3/16” bits #250-1310 Straight $19.50 #250-1350 Left Hand $19.50 #250-1380 Right Hand $19.50 #6675 POR Cut-Off Tool with blade #6676 Cut-Off Blade Only POR #M6-386 POR Cutter Bit Set: Six HSS 3/16” cutter bits including LH turning and facing, RH turning and facing, round nose and 60? V-thread bit. #6600 $58.00 Atlas Manual of Lathe Operation. Describes in easy to understand language, 272 pages, 366 pictures, 89 charts and tables.
![CAUTION: WOOD-TURNING LA THE - Sears Parts Direct · CRAFTSMAN WOOD TURNING LATHE ] i f within one year from the date of purchase, th s Craftsman Wood Turning Lathe fa Is due to a](https://static.documents.pub/doc/80x56/5b49f3137f8b9a9a2c8bd6dd/caution-wood-turning-la-the-sears-parts-direct-craftsman-wood-turning-lathe.jpg)
