+ All Categories
Home > Documents > 6010792 Patrol Central Operator Web Edition Geting Started 20899

6010792 Patrol Central Operator Web Edition Geting Started 20899

Date post: 22-Oct-2014
Category:
Upload: kaveritex6072
View: 36 times
Download: 1 times
Share this document with a friend
Popular Tags:
178
PATROL ® Central Operator – Web Edition Getting Started Version 7.1 October 28, 2002
Transcript
Page 1: 6010792 Patrol Central Operator Web Edition Geting Started 20899

PATROL® Central Operator – Web Edition

Getting Started

Version 7.1

October 28, 2002

Page 2: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Copyright 2002 BMC Software, Inc., as an unpublished work. All rights reserved.

BMC Software, the BMC Software logos, and all other BMC Software product or service names are registered trademarks or trademarks of BMC Software, Inc. All other registered trademarks or trademarks belong to their respective companies.

PATROL technology holds U.S. Patent Number 5655081.

THE USE AND CONTENTS OF THIS DOCUMENTATION ARE GOVERNED BY THE SOFTWARE LICENSE AGREEMENT ENCLOSED AT THE BACK OF THIS DOCUMENTATION.

Restricted Rights LegendU.S. Government Restricted Rights to Computer Software. UNPUBLISHED -- RIGHTS RESERVED UNDER THE COPYRIGHT LAWS OF THE UNITED STATES. Use, duplication, or disclosure of any data and computer software by the U.S. Government is subject to restrictions, as applicable, set forth in FAR Section 52.227-14, DFARS 252.227-7013, DFARS 252.227-7014, DFARS 252.227-7015, and DFARS 252.227-7025, as amended from time to time. Contractor/Manufacturer is BMC Software, Inc., 2101 CityWest Blvd., Houston, TX 77042-2827, USA. Any contract notices should be sent to this address.

Contacting BMC Software

You can access the BMC Software Web site at http://www.bmc.com. From this Web site, you can obtain information about the company, its products, corporate offices, special events, and career opportunities.

United States and Canada Outside United States and Canada

Address BMC Software, Inc.2101 CityWest Blvd.Houston TX 77042-2827

Telephone

Fax

(01) 713 918 8800

(01) 713 918 8000

Telephone 713 918 8800 or800 841 2031

Fax 713 918 8000

Page 3: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Customer SupportYou can obtain technical support by using the Support page on the BMC Software Web site or by contacting Customer Support by telephone or e-mail. To expedite your inquiry, please see “Before Contacting BMC Software.”

Support Web Site

You can obtain technical support from BMC Software 24 hours a day, 7 days a week at http://www.bmc.com/support.html. From this Web site, you can

• read overviews about support services and programs that BMC Software offers• find the most current information about BMC Software products• search a database for problems similar to yours and possible solutions• order or download product documentation• report a problem or ask a question• subscribe to receive e-mail notices when new product versions are released• find worldwide BMC Software support center locations and contact information, including e-mail addresses,

fax numbers, and telephone numbers

Support by Telephone or E-mail

In the United States and Canada, if you need technical support and do not have access to the Web, call 800 537 1813. Outside the United States and Canada, please contact your local support center for assistance. To find telephone and e-mail contact information for the BMC Software support center that services your location, refer to the Contact Customer Support section of the Support page on the BMC Software Web site at www.bmc.com/support.html.

Before Contacting BMC Software

Before you contact BMC Software, have the following information available so that Customer Support can begin working on your problem immediately:

• product information

— product name— product version (release number)— license number and password (trial or permanent)

• operating system and environment information

— machine type— operating system type, version, and service pack or other maintenance level such as PUT or PTF— system hardware configuration— serial numbers— related software (database, application, and communication) including type, version, and service pack or

maintenance level

BMC Software, Inc., Confidential and Proprietary Information

iii

Page 4: 6010792 Patrol Central Operator Web Edition Geting Started 20899

• sequence of events leading to the problem

• commands and options that you used

• messages received (and the time and date that you received them)

— product error messages— messages from the operating system, such as file system full— messages from related software

BMC Software, Inc., Confidential and Proprietary Information

iv PATROL Central Operator – Web Edition Getting Started

Page 5: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Contents

Contents

Chapter 1 Product Components and CapabilitiesPATROL Central Operator Features . . . . . . . . . . . . . . . . . . . . . . . . . 1-2How PATROL Central Operator Fits into PATROL Central . . . . . . . 1-3How PATROL Central Operator Fits into PATROL . . . . . . . . . . . . . 1-4Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6Accessing Online Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7Accessing Books and Release Notes . . . . . . . . . . . . . . . . . . . . . . . . . 1-8Where to Go from Here . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8

Chapter 2 Installing PATROL Central OperatorImplementation Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

The PATROL 7.x Environment . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2Considerations for Determining Which Web Server to Use . . . . 2-3Firewalls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7

Installing PATROL Central Operator . . . . . . . . . . . . . . . . . . . . . . . . 2-8Workflow for Installing PATROL Central Operator . . . . . . . . . . 2-8Installable Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10Choosing a Typical or Custom Installation . . . . . . . . . . . . . . . . . 2-14Required Information for a Typical Installation . . . . . . . . . . . . . 2-15Required Information for a Custom Installation . . . . . . . . . . . . . 2-22Installation Worksheets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-25Installing PATROL Central Operator on Windows . . . . . . . . . . . 2-30Installing PATROL Central Operator on Unix . . . . . . . . . . . . . . 2-43

Directory Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-59Backing Up and Restoring PATROL Central and Console Modules 2-60Where to Go from Here . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-61

BMC Software, Inc., Confidential and Proprietary Information

Contents v

Page 6: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Chapter 3 Configuring Your Environment for PATROL Central Operator and Running the Web Server

Setting Up User Accounts and Groups . . . . . . . . . . . . . . . . . . . . . . .3-2User Accounts and Groups on the PATROL Console Server . . .3-2User Accounts on Managed Systems . . . . . . . . . . . . . . . . . . . . .3-4General Guidelines for Setting Up User Accounts and Groups .3-5About PATROL Central Administration . . . . . . . . . . . . . . . . . . .3-7Starting PATROL Central Administration . . . . . . . . . . . . . . . . . .3-8

Starting Related Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-8Starting and Stopping the RTserver . . . . . . . . . . . . . . . . . . . . . . .3-9Starting the PATROL Agent . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-11Starting the PATROL Console Server . . . . . . . . . . . . . . . . . . . . .3-13Managing Services on Windows . . . . . . . . . . . . . . . . . . . . . . . . .3-15

Starting and Stopping the Web Server . . . . . . . . . . . . . . . . . . . . . . . .3-16Starting and Stopping the Tomcat Servlet Container for the

IIS Web Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-17Starting and Stopping the Apache Web Server . . . . . . . . . . . . . .3-18Starting and Stopping the Tomcat Standalone Web Server . . . . .3-19Verifying the Installation and Execution of the Web Server and

Related Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-20Where to Go from Here . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-21

Chapter 4 Monitoring and Managing Your Enterprise with PATROL Central Operator

Web Browser Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2Solaris OS Patches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3About the Java Plugin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3About Installing or Accepting the Certificate . . . . . . . . . . . . . . .4-5

Setting Up Your Monitoring Environment . . . . . . . . . . . . . . . . . . . . .4-5Accessing PATROL Central . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-6The PATROL Central Console Infrastructure . . . . . . . . . . . . . . .4-7Accessing PATROL Central Operator . . . . . . . . . . . . . . . . . . . . .4-9About Your Management Profile . . . . . . . . . . . . . . . . . . . . . . . . .4-11Connecting to a PATROL Console Server and Selecting a

Management Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-12Adding Managed Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-16Loading PATROL KMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-19

Where to Go From Here . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-22

BMC Software, Inc., Confidential and Proprietary Information

vi PATROL Central Operator – Web Edition Getting Started

Page 7: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Chapter 5 Using the PATROL 3.x and PATROL 7.x ConsolesCompatibility and Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

PATROL Agent Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2KM Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2Developer Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Differences Between PATROL Console for Windows or PATROL Console for Unix and PATROL Central Operator . . . . . . . . . . . . . 5-3

Communications with Managed Systems . . . . . . . . . . . . . . . . . . 5-4Session and Desktop Files Versus Management Profiles . . . . . . 5-4Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5User Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5User Names and Passwords for Managed Systems . . . . . . . . . . 5-6Computer Name and Port Number Versus Managed

System Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6Event Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7Customizations Versus Overrides . . . . . . . . . . . . . . . . . . . . . . . . 5-7State Change Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7KM Version Arbitration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8Chart History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8Location of Task Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9KMs in the PATROL Object Namespace . . . . . . . . . . . . . . . . . . 5-9Running Menu Commands and InfoBox Commands . . . . . . . . . 5-10

Migrating Console Information from PATROL Console for Windows or PATROL Console for Unix . . . . . . . . . . . . . . . . . . . . 5-10

Appendix A Troubleshooting PATROL Central OperatorCommon Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

The Web Server Will Not Start . . . . . . . . . . . . . . . . . . . . . . . . . A-3On Solaris, the Web Server Dies at Startup . . . . . . . . . . . . . . . A-3The PATROL Central Web Page Is Not Available . . . . . . . . . . A-4The RTserver or PATROL Console Server Is Not Responding A-5Users Cannot Log on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6Users Cannot Add a Managed System . . . . . . . . . . . . . . . . . . . A-8Users are Prompted to Log on to a Managed System . . . . . . . . A-9No Online Help Exists for a Specific KM . . . . . . . . . . . . . . . . A-9PATROL Central Does Not Prompt for Password in

Attended Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-10Users Are Told to Accept the Certificate, But Are Never

Allowed To Do So . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-10

BMC Software, Inc., Confidential and Proprietary Information

Contents vii

Page 8: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Gathering Troubleshooting Information . . . . . . . . . . . . . . . . . . . . . A-11Installation Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-11Web Server Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-12Client Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-16Checking Which PATROL Central Ports Are In Use on Unix . A-17Obtaining Version, System and Contact Information . . . . . . . . A-18

Dealing with Web Server Issues . . . . . . . . . . . . . . . . . . . . . . . . . . . A-19

Appendix B Enhancing Web Server SecurityAbout Limiting the Web Server Account . . . . . . . . . . . . . . . . . . . . . B-2About Locking Down Files and Directories . . . . . . . . . . . . . . . . . . B-2

How Locking Down Files and Directories Works . . . . . . . . . . . B-2When to Lock and Unlock Files and Directories . . . . . . . . . . . B-3Locking and Unlocking Files and Directories . . . . . . . . . . . . . . B-4

About the Keystore Password and Self-signed Certificate for the Apache Web Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-6

About the Keystore Password and the Apache Policy File . . . . B-6Replacing the Self-signed Certificate . . . . . . . . . . . . . . . . . . . . B-7About Attended and Unattended Modes for the Apache

Web Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-7

Appendix C Modifying Initialization Settings After InstallationLocation of the Startup Configuration File . . . . . . . . . . . . . . . . . . . C-2About Modifying the Startup Configuration File . . . . . . . . . . . . . . C-2What You May Modify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-3

Appendix D Environment Variables

Index

BMC Software, Inc., Confidential and Proprietary Information

viii PATROL Central Operator – Web Edition Getting Started

Page 9: 6010792 Patrol Central Operator Web Edition Geting Started 20899

1

Product Components and Capabilities 1

This chapter provides an overview of the PATROL Central Operator – Web Edition product for users and administrators of PATROL Central Operator. This product is also called PATROL Central Operator.

PATROL Central Operator Features . . . . . . . . . . . . . . . . . . . . . . . . . 1-2How PATROL Central Operator Fits into PATROL Central . . . . . . . 1-3How PATROL Central Operator Fits into PATROL . . . . . . . . . . . . . 1-4Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6Accessing Online Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7Accessing Books and Release Notes . . . . . . . . . . . . . . . . . . . . . . . . . 1-8Where to Go from Here . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8

BMC Software, Inc., Confidential and Proprietary Information

Product Components and Capabilities 1-1

Page 10: 6010792 Patrol Central Operator Web Edition Geting Started 20899

PATROL Central Operator FeaturesThe Web Edition of PATROL Central Operator is a cross-platform, Web-based console for use with the PATROL 7.x architecture. You can use it to monitor and manage an entire enterprise-wide information system or a collection of workstations, server computers, and single computers.

PATROL 7.x Architecture

PATROL Central Operator is part of the PATROL 7.x architecture. It communicates with PATROL Agents through the Real Time server (RTserver) and the PATROL Console Server. The PATROL Console Server acts as a centralized repository for storing PATROL Central Operator data in management profiles and serves as a mid-level tier to deliver data from managed systems to PATROL Central Operator, thereby reducing network traffic.

For more information about PATROL Console Server and RTserver, see the PATROL Console Server and RTserver Getting Started.

System Monitoring and Managing

From PATROL Central Operator, you can view the state of resources, such as managed systems, applications, and parameters that are managed by PATROL. You can also perform basic PATROL operator console functions on those objects, such as parameter customizations, event management, managed system queries, and KM commands.

NotePATROL developer functionality is not supported by PATROL Central Operator. For development functionality, use the PATROL Console for Windows or PATROL Console for Unix in developer mode.

BMC Software, Inc., Confidential and Proprietary Information

1-2 PATROL Central Operator – Web Edition Getting Started

Page 11: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Custom Views

You can create custom views in your management profile. A custom view is a single window that can display multiple objects. For example, you can create a custom view to display the charts of several parameters together.

How PATROL Central Operator Fits into PATROL Central

PATROL Central Operator is a console module that leverages the PATROL Central console infrastructure.

The Web Edition of PATROL Central provides an integrated Web-based interface for its console modules. Both the console infrastructure and console modules are installed on the Web server.

BMC Software, Inc., Confidential and Proprietary Information

Product Components and Capabilities 1-3

Page 12: 6010792 Patrol Central Operator Web Edition Geting Started 20899

How PATROL Central Operator Fits into PATROL

Like other PATROL consoles, PATROL Central Operator provides a window into your PATROL environment. PATROL Central Operator works with the PATROL 7.x architecture.

Figure 1-1 shows the relationship between the Web Edition of PATROL Central Operator and other PATROL programs. Almost all of the information that you view in PATROL Central Operator ultimately comes from the individual managed systems. However, all communication between PATROL Central Operator and the managed systems is facilitated by the PATROL Console Server and Real-Time Server (RTserver) cloud.

NoteFor a more complete understanding of PATROL architecture, see the PATROL Fundamentals online Help.

BMC Software, Inc., Confidential and Proprietary Information

1-4 PATROL Central Operator – Web Edition Getting Started

Page 13: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Figure 1-1 PATROL Architecture for the Web Edition of PATROL Central Operator

RTserver Cloud

Common Services

PATROL Agent (version 3.5)

Install PATROL solutions (KMs) for resources on each system.

Web browser

PATROL Central – Web Edition

• PATROL Central Operator – Web Edition

• Other console modules

Console Systems

Managed Systems

PATROL Console Server

PATROL products and solutions may require additional files installed throughout the infrastructure.

BMC Software, Inc., Confidential and Proprietary Information

Product Components and Capabilities 1-5

Page 14: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Related DocumentationPATROL Central Operator is supported by the following documents:

• PATROL Central – Web Edition online Help• PATROL Central Operator – Web Edition online Help• PATROL Central Administration – Web Edition online Help• PATROL Fundamentals online Help• PATROL Central Operator – Web Edition Getting Started• PATROL Central Operator – Web Edition Release Notes• PATROL Console Server and RTserver Getting Started• PATROL Installation Reference Manual• PATROL Security User Guide• PATROL Infrastructure Planning Guide

BMC Software, Inc., Confidential and Proprietary Information

1-6 PATROL Central Operator – Web Edition Getting Started

Page 15: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Accessing Online Help

Online Help provides detailed instructions on how to use PATROL Central Operator, the PATROL Central console infrastructure, and other console modules. It also provides reference information on Knowledge Modules (KMs).

The following table describes a variety of methods for accessing Help.

For Help on … Do This

individual console modules, such as PATROL Central Operator or PATROL Central Administration

• In the upper-right corner of the PATROL Central interface, click the Help icon and choose PATROL Central Help.

PATROL Central and console module pages, including fields

• In the toolbar area, click the page help icon.

PATROL Knowledge Modules

• In the upper-right corner of the PATROL Central interface, click the Help icon and choose PATROL KM Help.

application instances and classes

• In the tree view area, right-click the application instance or class and choose Help.

parameters • In the tree view area, right-click the parameter and choose Help.

BMC Software, Inc., Confidential and Proprietary Information

Product Components and Capabilities 1-7

Page 16: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Accessing Books and Release Notes

A set of PATROL manuals is provided on the documentation CD included with the kit. You can view manuals in electronic format or order additional printed copies from the Web at http://www.bmc.com/support.html.

For the latest updates to product information, refer to the release notes, which are available at http://www.bmc.com/support.html.

Where to Go from Here

For information about... See...

installing PATROL Central Operator

Chapter 2, “Installing PATROL Central Operator” and the PATROL Installation Reference Manual

configuring other PATROL programs and computers to work with PATROL Central Operator and running the Web server

Chapter 3, “Configuring Your Environment for PATROL Central Operator and Running the Web Server”

monitoring and managing with PATROL Central Operator

Chapter 4, “Monitoring and Managing Your Enterprise with PATROL Central Operator”

using both PATROL 3.x console and PATROL Central Operator, or moving from a PATROL 3.x console

Chapter 5, “Using the PATROL 3.x and PATROL 7.x Consoles”

BMC Software, Inc., Confidential and Proprietary Information

1-8 PATROL Central Operator – Web Edition Getting Started

Page 17: 6010792 Patrol Central Operator Web Edition Geting Started 20899

2

Installing PATROL Central Operator 2

This chapter provides information for PATROL administrators about installing the Web Edition of PATROL Central Operator.

For more information on how to run the installation program and the differences between types of installations, see the PATROL Installation Reference Manual.

This chapter discusses the following topics:

Implementation Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2The PATROL 7.x Environment . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2Considerations for Determining Which Web Server to Use . . . . 2-3Firewalls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7

Installing PATROL Central Operator . . . . . . . . . . . . . . . . . . . . . . . . 2-8Workflow for Installing PATROL Central Operator . . . . . . . . . . 2-8Installable Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10Choosing a Typical or Custom Installation . . . . . . . . . . . . . . . . . 2-14Required Information for a Typical Installation . . . . . . . . . . . . . 2-15Required Information for a Custom Installation . . . . . . . . . . . . . 2-22Installation Worksheets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-25Installing PATROL Central Operator on Windows . . . . . . . . . . . 2-30Installing PATROL Central Operator on Unix . . . . . . . . . . . . . . 2-43

Directory Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-59Backing Up and Restoring PATROL Central and Console Modules 2-60Where to Go from Here . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-61

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-1

Page 18: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Implementation Considerations

This section provides an overview of things to consider when implementing PATROL Central Operator and the PATROL 7.x architecture. For more information about implementation, see the PATROL Infrastructure Planning Guide and run the PATROL Infrastructure Planner.

The PATROL 7.x Environment

PATROL Central Operator requires a PATROL 7.x environment, which includes the following components:

• PATROL Agent v3.5 or later installed on managed systems• RTserver v6.2 or later• PATROL Console Server v7.2 or later• PATROL KMs

The size of your environment and number of concurrent users determines the number of PATROL Console Servers and RTservers you need. For detailed explanations and guidance, see the PATROL Infrastructure Planning Guide. For more information about installing PATROL Console Server and RTserver, see the PATROL Console Server and RTserver Getting Started.

For more information about installing PATROL Agent and PATROL KMs, see the getting started guide for the product or solution you are installing.

NoteYou must enable the PATROL Agent 3.5 to communicate with the RTserver before you can use PATROL Central Operator to monitor that managed system. For more information, see the PATROL Console Server and RTserver Getting Started.

BMC Software, Inc., Confidential and Proprietary Information

2-2 PATROL Central Operator – Web Edition Getting Started

Page 19: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Considerations for Determining Which Web Server to Use

The PATROL Central console infrastructure requires a Web server.

About the Tomcat Servlet Container

The Tomcat servlet container is installed with PATROL Central, regardless of the Web server that you choose. This servlet container runs Java code for PATROL Central.

IIS Web Server with Tomcat Servlet Container (Windows)

If you choose to integrate with Microsoft Internet Information Services (IIS), IIS must already be installed on the computer on which you want to install PATROL Central. The Tomcat servlet container will be installed when you install PATROL Central.

The installation will add a virtual directory and an ISAPI filter, both named PATROLCentralWebEdition, to the selected IIS Web Site instance. The ISAPI filter redirects execution of Java pages to the Tomcat servlet container.

IIS must be configured to support HTTPS. For specific instructions, consult your IIS documentation. As part of the process, you must obtain a trusted root certificate from a certificate authority. The certificate is required to enable Secure Sockets Layer (SSL) for the Web server. See “About Certificates” on page 2-6. For more information about obtaining and installing a certificate, see “Certificate Information (IIS Only)” on page 2-18.

Platform Available Web Servers

Windows • IIS (version 4.0 for Windows NT or version 5.0 for Windows 2000) with Tomcat servlet container

• Tomcat version 4.0.1 standalone (not recommended for production environments)

Unix • Apache version 1.3.26 with Tomcat servlet container• Tomcat version 4.0.1 standalone (not recommended

for production environments)

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-3

Page 20: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Apache Web Server with Tomcat Servlet Container (Unix)

If you choose to integrate with Apache version 1.3.26, both Apache and the Tomcat servlet container will be installed with PATROL Central.

A new instance of Apache will be installed, even if there already is an instance of Apache on the computer. If there will be multiple Web servers on the computer, you must make certain that they do not use conflicting ports. For more information, see “Web Server HTTP and HTTPS Ports (Apache and Tomcat Only)” on page 2-24.

A self-signed certificate is created for you, using information that you enter during the install. However, this certificate is not signed by a trusted root. You might want to replace it with a certificate from a certificate authority. For more information about the information you must provide for the certificate, see “Certificate Information (Apache and Tomcat Only)” on page 2-20.

TipFor more information about Apache, see the Apache HTTP Server Web site at http://httpd.apache.org or the Apache documentation installed with Apache at http://hostname:port/manual, where hostname is the name of the server, and port is its HTTP port.

BMC Software, Inc., Confidential and Proprietary Information

2-4 PATROL Central Operator – Web Edition Getting Started

Page 21: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Tomcat Standalone Web Server (Windows or Unix)

If you choose to use the Tomcat standalone Web server, then Tomcat, including the Tomcat servlet container, will be installed with PATROL Central.

A new instance of Tomcat will be installed, even if there already is an instance of Tomcat on the computer. If there will be multiple Web servers on the computer, you must make certain that they do not use conflicting ports. For more information, see “Web Server HTTP and HTTPS Ports (Apache and Tomcat Only)” on page 2-24.

A self-signed certificate is created for you, using information that you enter during the install. This certificate is sufficient for use in a test environment. For more information about the information you must provide for the certificate, see “Certificate Information (Apache and Tomcat Only)” on page 2-20.

NoteGood practice recommends that the Tomcat standalone Web server not be used in production environments. The Tomcat standalone Web server is not as fast or secure as Apache or IIS.

TipFor more information about Tomcat, see the Jakarta Project Web site at http://jakarta.apache.org/tomcat or the Tomcat documentation installed with Tomcat at http://hostname:port/tomcat-docs, where hostname is the name of the server, and port is its HTTP port.

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-5

Page 22: 6010792 Patrol Central Operator Web Edition Geting Started 20899

About Certificates

A Web server requires a digital certificate, which identifies the source of online transactions. This certificate is contained in a keystore for the Web server. Which Web server you use and the level of security you want determine the type of certificate you use.

A certificate can be self-signed or provided by a certificate authority. A certificate provided by a certificate authority provides the browser user with more confidence that the server delivering the certificate is authentic. A certificate authority, also referred to as the certificate signing authority, is a trusted public or private organization that signs certificates using a private key unique to their organization.

A certificate is validated by a hierarchy of certificate authorities that approve the certificate. This process is called a “chain of trust.” The final certificate authority in the chain is called the “trusted root certificate authority” or “trusted root.”

Certificates also contain the name of the Web site to ensure that they are not arbitrarily moved. The Web browser will notify the user if the Web site in the certificate does not match the URL being viewed.

BMC Software, Inc., Confidential and Proprietary Information

2-6 PATROL Central Operator – Web Edition Getting Started

Page 23: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Firewalls

How you deal with a firewall depends on where it is located.

• If a firewall separates the Web server from Web browser clients, configure the firewall to allow HTTP and HTTPS communications.

• If a firewall separates the Web server from the computer with PATROL Console Server, install an RTserver on at least one computer on each side of the firewall. The RTservers communicate across the firewall as a single RTserver cloud.

The Web server communicates with the part of the RTserver cloud on its side of the firewall. The RTserver cloud is responsible for carrying messages across the firewall.

NoteFor information about configuring the RTserver cloud to work with firewalls, see the PATROL Console Server and RTserver Getting Started.

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-7

Page 24: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Installing PATROL Central Operator

This section describes installing PATROL Central Operator, including all of its installable components.

Workflow for Installing PATROL Central Operator

Select a computer and a

Web server type.

Review system requirements and implementation considerations.

Complete the installation worksheets

starting on page 2-25.

1 2

4 If needed, create accounts as

indicated in the installation information.

5

Review required information for an

installation starting on page

2-15.

3

Install PATROL Central Operator.

6

BMC Software, Inc., Confidential and Proprietary Information

2-8 PATROL Central Operator – Web Edition Getting Started

Page 25: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Installable Components

The following table lists components that can be installed as part of PATROL Central Operator.

Before installing any of these components, ensure that the system requirements have been met (see “System Requirements” on page 2-10) and that you know all of the required information (see “Required Information for a Typical Installation” on page 2-15 and “Required Information for a Custom Installation” on page 2-22).

Component Comments

PATROL Central Operator

This is the primary component of PATROL Central Operator. It is a console module for PATROL Central.

PATROL Central Administration

This component provides administration of user access to PATROL. It is a console module for PATROL Central. For more information, see “About PATROL Central Administration” on page 3-7.

PATROL Central This component provides the console infrastructure for console modules, such as PATROL Central Operator and PATROL Central Administration. It is automatically installed when you install a console module. Do not install PATROL Central by itself, unless you also install a different product that instructs you to do so.

KM Help Files These help files are necessary for providing KM Help for PATROL Central Operator.

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-9

Page 26: 6010792 Patrol Central Operator Web Edition Geting Started 20899

System Requirements

This section lists the system requirements for the installable components listed under “Installable Components” on page 2-9.

You do not need to install any PATROL Central Operator components on client computers. For requirements for client computers, see “Web Browser Requirements” on page 4-2.

Minimum Requirements Comments

One of the following operating systems:• Red Hat Linux 6.2• Red Hat Linux 7.1• Red Hat Linux 7.2

• Solaris 2.7 / 7 (32, 64 bit)• Solaris 8 (32, 64 bit)

See “Solaris OS Patches” on page 2-11.

• Windows 2000 Advanced Server - SP2• Windows 2000 Datacenter Server - SP2• Windows 2000 Server - SP2• Windows NT 4 Enterprise Edition - SP6A• Windows NT 4 Server - SP6A

For security purposes, if you use a Windows system, you must use an NTFS system. FAT volumes are not supported.

350 MB disk space (approximately) You need less disk space if you do not install all of the components.

processor and memory The processor and memory required depends on the size of your environment. See “Processor and Memory Requirements” on page 2-11.

One of the following Web servers

• IIS v4.0 (Windows NT)• IIS v5.0 (Windows 2000)• Apache v1.3.26 (Unix, installed with PATROL

Central )• Tomcat v4.0.1 standalone (Windows or Unix,

installed with PATROL Central)

See “Considerations for Determining Which Web Server to Use” on page 2-3 for more information.

PATROL environment See “The PATROL 7.x Environment” on page 2-2.

100 mbps network speed

BMC Software, Inc., Confidential and Proprietary Information

2-10 PATROL Central Operator – Web Edition Getting Started

Page 27: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Solaris OS Patches

The latest patches for Solaris must also be installed, including the J2SE patch cluster for your version of Solaris.

These patches can be retrieved from the Solaris maintenance Web site at http://sunsolve.sun.com.

WarningThe patches are necessary to address multiple problems that can range from subtle usage problems to crashes.

Processor and Memory Requirements

The processor and memory requirements vary, depending on the size of your environment. Each Web browser client is considered one console.

• Small environments have less than 100 managed systems and three to five consoles.

• Medium environments have less than 500 managed systems and five to ten consoles.

• Large environments have more than 500 managed systems and ten or more consoles. A typical large environment might include 1000 managed systems across multiple sites.

The following table lists processor and memory requirements for small, medium, and large environments. Minimum and recommended requirements are listed; use the recommended requirements for better performance or to support a number of console users greater than those listed in the definitions above.

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-11

Page 28: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Resource Minimum Requirements Recommended Requirements

Small environment

Processora

a Specific processors are listed as examples only. You can use an equivalent processor.

• Single processor, Intel Pentium III at 800 Mhz(Linux and Windows)

• Single processor, SUN Ultra 10 at 300 MHz or Netra X1 at 400 MHz (Solaris)

• Dual processor, Intel Pentium III at 800 Mhz(Linux and Windows)

• Dual processor, Solaris UltraSPARC 220R at 450 MHz (Solaris)

Server memory 512 MB 1 GB

Medium environment

Processora • Dual processor, Intel Pentium III at 800 Mhz (Linux and Windows)

• Dual processor, SUN Ultra 220R at 450 MHz (Solaris)

• Dual processor, Intel Pentium III at 1400 MHz (Linux and Windows)

• Dual processor, SUN Ultra 280R at 750 MHz (Solaris)

Server memory 1 GB 2 GB

Large environment

Processora • Dual processor, Intel Pentium IV 1000 Mhz (Linux and Windows)

• Dual processor, SUN Ultra 280R at 750 MHz (Solaris)

• Three- or four-processor, Intel Pentium IV 1000 Mhz (Linux and Windows)

• Dual processor, Solaris UltraSPARC 280R at 750 MHz (Solaris)

Server memory 2 GB 3 GB

BMC Software, Inc., Confidential and Proprietary Information

2-12 PATROL Central Operator – Web Edition Getting Started

Page 29: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Scalability Guidelines

Use the following guidelines to determine how many PATROL Central Web servers to use.

• Implement one PATROL Central Web server for each location.

• Implement PATROL Central Web server for approximately every 25 Web browser clients. This number varies, depending on what the Web browser clients are used for, and the performance burden being placed on the Web server.

TipFor best performance, especially in a large environment, install PATROL Central and its console modules on a dedicated computer.

For information on scalability considerations, see the PATROL Infrastructure Planning Guide.

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-13

Page 30: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Choosing a Typical or Custom Installation

The installation utility provides both Typical and Custom installations.

• The Typical installation allows you to install all components at the same time. You will be asked for only mandatory configuration information.The defaults will be used for all optional configuration information.

• The Custom installation allows you to install individual components. You will be asked for both mandatory and optional configuration information.

You must use a Custom installation in the following cases:

• You want to use a security level greater than basic security.

• You want to install only some of the components. For example, you want to install only one console module, or you want to install KM help for only some KMs.

• You want to use specific ports other than the defaults. For example, you have another instance of Apache on the same computer that already uses the default ports.

• You want to use a specific IIS Web site instance, other than the default.

• You want to use a specific name for the PATROL Central sub-directory, other than the default.

BMC Software, Inc., Confidential and Proprietary Information

2-14 PATROL Central Operator – Web Edition Getting Started

Page 31: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Required Information for a Typical Installation

You need to know the information in this section before installing the components listed under “Installable Components” on page 2-9 using the Typical path.

Installation Directory

The base installation directory is the location where you will install all products that you select. Additional directories will be created under the base installation directory.

The default for this directory on Windows is C:\Program Files\BMC Software. The default on Unix is /opt/bmc.

This directory is stored as the $BMC_ROOT or %BMC_ROOT% environment variable.

NoteAll BMC Software products installed on the same computer must share the same installation directory.

Web Server

You must select which Web server to use.

For more information, see “Considerations for Determining Which Web Server to Use” on page 2-3.

Root Login and Password (Unix only)

On Unix, you must specify the Root login name and password.

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-15

Page 32: 6010792 Patrol Central Operator Web Edition Geting Started 20899

PATROL Console Server

Both the PATROL Central console infrastructure and individual console modules use PATROL Console Servers. A PATROL Console Server can serve different purposes for PATROL Central and each console module.

• PATROL Central uses a PATROL Console Server as a security server to authenticate users. Only users who have accounts known to that PATROL Console Server can use PATROL Central or any of its console modules.

• Individual console modules can use the same PATROL Console Server as PATROL Central or additional PATROL Console Servers, depending on the console module. For example, in PATROL Central Operator, users can open management profiles on the PATROL Console Server used by PATROL Central or other PATROL Console Servers.

You specify the PATROL Console Server for PATROL Central during the install of PATROL Central. For information about changing this PATROL Console Server after installation, see Appendix C, “Modifying Initialization Settings After Installation.”

TipYou identify a PATROL Console Server by name. By default, this name is the host name of the PATROL Console Server; however, a different name can be specified when starting the PATROL Console Server. Do not use the IP address.

You can use additional PATROL Console Servers with individual console modules by including them in the RTserver cloud. For more information, see the PATROL Console Server and RTserver Getting Started.

For more information about setting up user accounts on PATROL Console Servers, see “Setting Up User Accounts and Groups” on page 3-2.

For more information about the role of the PATROL Console Server, see the PATROL Console Server and RTserver Getting Started.

BMC Software, Inc., Confidential and Proprietary Information

2-16 PATROL Central Operator – Web Edition Getting Started

Page 33: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Web Server User Name and Group (Apache and Tomcat Only)

Before you install PATROL Central, you must create an operating system account for the Web server. The installation will ask you for the user name for the account. Do not use this account for any other purposes. On Unix, you must also be logged on as this account when you run the install.

On Unix, you must also create an operating system group for the Web server account, and the account should belong to only this Web server group for security purposes. The installation will also ask you for the group name.

Example Commands for Creating the Account and Group on Unix

On Unix, to create a user and group, both called wwwadmin, and give the account a password, issue the following commands as root:

groupadd wwwadmin useradd -m -g wwwadmin wwwadmin passwd wwwadmin

You use this account to run the install, so you must also ensure that it can create the base installation directory. For example, issue the following commands to change the permissions for the wwwadmin account on the BMC_base_directory directory:

chmod ugo+rwx BMC_base_directory chown wwwadmin BMC_base_directory

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-17

Page 34: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Certificate Information (IIS Only)

If you choose to integrate with IIS, you must have a trusted root certificate from a certificate authority. The certificate is required to enable Secure Sockets Layer (SSL) for the Web server. See “About Certificates” on page 2-6.

The general process for obtaining and installing a certificate from a certificate authority for IIS is as follows. For detailed instructions about using IIS, refer to the documentation for that product.

1. Use IIS to create a Certificate Signing Request (CSR).

NoteWhen creating the CSR, you must specify a bit length of 1024. This will make the certificate more secure.

IIS creates a CSR in the format filename.txt, and stores it on your system in the specified directory. A typical CSR is shown below:

-----BEGIN NEW CERTIFICATE REQUEST-----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-----END NEW CERTIFICATE REQUEST-----

BMC Software, Inc., Confidential and Proprietary Information

2-18 PATROL Central Operator – Web Edition Getting Started

Page 35: 6010792 Patrol Central Operator Web Edition Geting Started 20899

2. Send the CSR text to the certificate authority.

Several certificate authority vendors allow you to copy and paste the CSR text to their Web sites.

The certificate authority typically generates a signed certificate in the format filename.cer.

3. Obtain the signed certificate from the certificate authority vendor.

Several certificate authority vendors allow you to download the signed certificate from their Web sites.

4. Use IIS to install the signed certificate.

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-19

Page 36: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Certificate Information (Apache and Tomcat Only)

You must provide the following information for the self-signed certificate created during the installation.

NoteCommas in any of the fields will be converted to spaces. Commas are used internally as delimiters by the certificate generation tool.

Field Description

keystore password This is the password used to protect the keystore and the certificate. It must be at least eight characters for the Apache Web server or six characters for the Tomcat standalone Web server.

server domain name This is the name of the Web server, as it will be specified in the URL for accessing the PATROL Central Web site.The Web browser will compare the server domain name in the certificate to the URL used to access the Web server. If they differ, a warning will be displayed by the browser.

organization name and organizational unit name

These fields identify your organization.

city, state, and country These fields identify the location of your organization.

BMC Software, Inc., Confidential and Proprietary Information

2-20 PATROL Central Operator – Web Edition Getting Started

Page 37: 6010792 Patrol Central Operator Web Edition Geting Started 20899

NoteIf you choose the Tomcat standalone Web server, due to limitations of the Web server implementation, the keystore password is stored unencrypted in the Tomcat server.xml file. Although this file can be read by only the Web server account, it is vulnerable if that account is compromised. Although BMC Software is not aware of such a vulnerability at present, we recommend that a nonsensitive password be used.

BMC Software also recommends that you do not add sensitive certificates to the Tomcat keystore in the event that the password is discovered. The site-specific, self-signed certificate deployed during the product installation is usually sufficient.

RTserver

You must specify which RTserver to use. The format is protocol:hostname:port.

The default is tcp:localhost:2059. You can use this default only if PATROL Central will use an RTserver on the local computer with the default port.

For more information, see PATROL Console Server and RTserver Getting Started.

For information about changing this value after installation, see Appendix C, “Modifying Initialization Settings After Installation.”

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-21

Page 38: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Required Information for a Custom Installation

If you select a Custom installation, you need to know all of the information for a Typical installation, plus the information in this section.

KM Help Files

If you use a Custom installation, you must manually select the appropriate KM Help files for your environment on the Select Products and Components to Install screen.

Users of PATROL Central Operator will not be able to access KM Help unless the KM Help files are installed on the Web server.

PATROL Central Sub-directory

The installation program creates a sub-directory for PATROL Central under the base installation directory.

On Windows, the default for this directory is WebCentral. On Unix, the default is webcentral.

PATROL Security Information

You must set the level of security that you want to use. For more information, see the PATROL Security User Guide.

NoteThe security level must match the security level of other PATROL components that you will be communicating with.

BMC Software, Inc., Confidential and Proprietary Information

2-22 PATROL Central Operator – Web Edition Getting Started

Page 39: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Tomcat Shutdown Port

The Tomcat servlet container listens for termination messages on the shutdown port. The port does not need to be visible outside the Web server; however, no other applications can use this port.

The default port is 8005.

Apache-Jakarta Protocol Version 13 Port (IIS and Apache Only)

The Apache-Jakarta Protocol version 13 port is used by the IIS and Apache Web servers to communicate with the Tomcat servlet container. The port does not need to be visible outside the Web server; however, no other applications can use this port.

The default port is 8009.

IIS HTTPS Ports (IIS Only)

This is the port that IIS is configured to use for secure communications.

The default HTTPS port is 443.

For information about changing this value after installation, see Appendix C, “Modifying Initialization Settings After Installation.”

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-23

Page 40: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Web Server HTTP and HTTPS Ports (Apache and Tomcat Only)

The Web server uses these ports for unsecure (HTTP) and secure (HTTPS) communications.

If there will be multiple Web servers on the computer, make sure that each Web server uses a different set of ports. If a port is already in use when you run the install, the install will prompt you to specify a different port.

The default HTTP port is 80. The default HTTPS port is 443. If you do not use the default HTTP port, users will have to include the port number in the URL for accessing the PATROL Central Web site. For example, if the Web server myserver is using port 8080, view the URL http://myserver:8080.

For information about changing the HTTPS port after installation, see Appendix C, “Modifying Initialization Settings After Installation.”

IIS Web Site Instance (IIS Only)

IIS can support multiple Web site instances. The install retrieves the list of Web site instances from the IIS metabase. Each Web site instance is identified by both its name and its instance number.

You must select which instance you want to use with PATROL Central. The default is the default Web site.

Trimming Apache Web Server Log Files (Apache Only)

The Apache Web server log files can grow considerably over the course of time. For example, each image load request is logged.

The installation installs a utility that truncates the log files for the Apache Web server while the Web server is running, so that they do not grow without limit. This utility can be run periodically as a job in the root crontab.

You can choose the maximum log file size. The same maximum size is applied to each log file. The default value is 20MB.

BMC Software, Inc., Confidential and Proprietary Information

2-24 PATROL Central Operator – Web Edition Getting Started

Page 41: 6010792 Patrol Central Operator Web Edition Geting Started 20899

You can choose whether the installer automatically adds the job to the root crontab. If you chose to not add the job to the root crontab, you can add the job manually and adjust the job schedule.

For more information, see “Apache Web Server Logs” on page A-12.

Installation Worksheets

Use these worksheets to record information for your installation.

» Complete both the general worksheet and the worksheet for your Web server.

TipYou can use the completed worksheets to determine if you need to use a Custom installation. For more information, see “Choosing a Typical or Custom Installation” on page 2-14.

Worksheet Page

General Worksheet 2-26

Worksheet for IIS Web Server 2-27

Worksheet for Apache Web Server 2-28

Worksheet for Tomcat Standalone Web Server 2-29

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-25

Page 42: 6010792 Patrol Central Operator Web Edition Geting Started 20899

General Worksheet

Computer Name:

Which console modules do you want to install? • PATROL Central Operator• PATROL Central Administration

Which KMs will you need online Help for?The default is all KMs.a

a If you do not use the default, you must use a custom install.

• All default KMs• Only specific KMs

Which Web Server do you want to use? • IIS (Windows)• Apache (Unix)• Tomcat standalone (Windows or Unix)

Directories

Where do you want to install BMC Software products?The default is C:\Program Files\BMC Software (Windows) or /opt/bmc (Unix).

What do you want to name the sub-directory for PATROL Central? The default is WebCentral (Windows) or webcentral (Unix).a

Security Information

What security level do you want to use?The default is basic.a

• basic• level 1• level 2• level 3• level 4

PATROL Console Server

What is the name of the PATROL Console Server to use to authenticate users for PATROL Central?

Tomcat Servlet Container Information

Shutdown port for the Tomcat servlet containerThe default is 8005.a

RTserver Information

What is the name of the RTserver computer to use?The default is localhost.

What is the port number for the RTserver to use?The default is 2059.

BMC Software, Inc., Confidential and Proprietary Information

2-26 PATROL Central Operator – Web Edition Getting Started

Page 43: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Worksheet for IIS Web Server

IIS Web Server

Do you have a certificate? (required)

IIS Web Site Instance

IIS Ports

AJP 13 portThe default is 8009.a

a If you do not use the default, you must use a custom install.

HTTPS portThe default is 443.a

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-27

Page 44: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Worksheet for Apache Web Server

Apache Ports

HTTP portThe default is 80.

HTTPS portThe default is 443.

AJP 13 portThe default is 8009.a

a If you do not use the default, you must use a custom install.

Apache User Name and Group

You will need the root login name and password. ****

Apache HTTPD User Name

Apache HTTPD Group

Apache Log Maintenance

Maximum size for log files.The default is 20 MB.a

Automatically add job to crontab?The default is yes.a

yes / no

Apache Certificate Information

keystore password ****

server domain name

organization name

organizational unit name

city

state

country

BMC Software, Inc., Confidential and Proprietary Information

2-28 PATROL Central Operator – Web Edition Getting Started

Page 45: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Worksheet for Tomcat Standalone Web Server

Tomcat User Name and Group

You will need the root login name and password (Unix only).

****

Tomcat user name

Tomcat user group (Unix only)

Tomcat Ports

HTTP portThe default is 80.a

a If you do not use the default, you must use a custom install.

HTTPS portThe default is 443.a

Tomcat Certificate Information

keystore password ****

server domain name

organization name

organizational unit name

city

state

country

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-29

Page 46: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Installing PATROL Central Operator on Windows

Summary: This task describes how to install PATROL Central Operator, including all the components listed under “Installable Components” on page 2-9 on Windows.

If you install only some of the components, you might be asked for less configuration information. If you install other programs from the same CD at the same time, you will be asked for additional configuration information for those programs.

For more information on how to run the installation program, see the PATROL Installation Reference Manual.

This task applies to both a Typical and Custom installation; however, the screen captures reflect the Typical installation. If you choose a Custom installation, the screens will vary slightly.

Before You Begin

The following requirements must be met before you can run the installation:

• The computer must meet the requirements stated in “System Requirements” on page 2-10.

• If a PATROL Console Server, RTserver, or PATROL Agent are on the computer, they are stopped.

• You are logged on using an account in the Administrators group so that you can install software and modify user rights.

• All of the ports to be used by the Web server are available.

BMC Software recommends having PATROL Console Server and RTserver installed in your environment (not necessarily the same computer) before installing PATROL Central Operator.

BMC Software, Inc., Confidential and Proprietary Information

2-30 PATROL Central Operator – Web Edition Getting Started

Page 47: 6010792 Patrol Central Operator Web Edition Geting Started 20899

The installation procedures for the IIS and Tomcat Web servers are slightly different.

To Install PATROL Central Operator on Windows with IIS

Step 1 Insert the product CD into the CD drive and run setup.exe. Then click Next to start the installation program.

Step 2 Review the license agreement. If you accept it, choose Accept. Then click Next.

Procedure Page

To Install PATROL Central Operator on Windows with IIS 2-31

To Install PATROL Central Operator on Windows with the Tomcat Standalone Web Server

2-40

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-31

Page 48: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Step 3 On the Select Installation Option page, choose I want to install products on this computer now. Then click Next.

For more information about creating an installable image, see the PATROL Installation Reference Manual.

BMC Software, Inc., Confidential and Proprietary Information

2-32 PATROL Central Operator – Web Edition Getting Started

Page 49: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Step 4 On the Select Type of Installation page, choose Typical or Custom as the installation type. Then click Next.

For more information about the installation type, see “Choosing a Typical or Custom Installation” on page 2-14.

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-33

Page 50: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Step 5 On the Specify Installation Directory page, specify the location where you want to install BMC products. Then click Next.

For more information about the installation directory, see “Installation Directory” on page 2-15.

BMC Software, Inc., Confidential and Proprietary Information

2-34 PATROL Central Operator – Web Edition Getting Started

Page 51: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Step 6 On the Select System Roles page, select Common Services as the system role. Then click Next.

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-35

Page 52: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Step 7 On the Select Products and Components to Install page, expand the PATROL Central - Web Edition folder and then select PATROL Central Console for Web and all Console Modules.

If you chose the Custom installation, you can select individual components instead. For more information, see “Installable Components” on page 2-9.

Step 8 If you chose the Custom installation, on the Select Level of Security screen, select the level of security that you want to use. Then click Next.

For more information, see “PATROL Security Information” on page 2-22.

BMC Software, Inc., Confidential and Proprietary Information

2-36 PATROL Central Operator – Web Edition Getting Started

Page 53: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Step 9 If you chose the Custom installation and selected Advanced security options, complete the security information. Then click Next.

For more information, see “PATROL Security Information” on page 2-22.

Step 10 On the Select Web Server for Windows Platforms page, select Microsoft IIS. Then click Next.

Step 11 If you chose the Custom installation, specify the location where you want to install PATROL Central. Then click Next.

For more information, see “PATROL Central Sub-directory” on page 2-22.

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-37

Page 54: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Step 12 On the Configure PATROL Central - Web Edition page, specify the name of the PATROL Console Server to be used as the security server.

For more information, see the “PATROL Console Server” on page 2-16. Then click Next.

Step 13 If you chose the Custom installation, specify the shutdown port number the Tomcat servlet container. Also select whether you want to start the Tomcat servlet container as a service after the installation. Then click Next.

For more information about the shutdown port number, see “Tomcat Shutdown Port” on page 2-23.

Step 14 If you chose the Custom installation, specify the AJP 13 port and the port that is used by Microsoft IIS for HTTPS connections. Then choose the the Web site instance to use. Then click Next.

For more information, see “Apache-Jakarta Protocol Version 13 Port (IIS and Apache Only)” on page 2-23, “IIS HTTPS Ports (IIS Only)” on page 2-23, and “IIS Web Site Instance (IIS Only)” on page 2-24.

BMC Software, Inc., Confidential and Proprietary Information

2-38 PATROL Central Operator – Web Edition Getting Started

Page 55: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Step 15 On the RTSERVERS Variable Properties page, specify the RTserver to use.

For more information, see “RTserver” on page 2-21.

Step 16 On the Review Selections and Install screen, review your product selections and configuration information. Click Back to make changes or click Start Install to complete the installation.

Step 17 Watch the Installation Status page to verify that the installation process completes successfully. When the installation is complete, click Next.

Step 18 On the SUCCESS page, if you want to review the installation log file, click View Log File. When you are done, click Finish.

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-39

Page 56: 6010792 Patrol Central Operator Web Edition Geting Started 20899

To Install PATROL Central Operator on Windows with the Tomcat Standalone Web Server

NoteIt is recommended that the Tomcat standalone Web server not be used for production environments.

Step 1 Complete Step 1 through Step 9 of “To Install PATROL Central Operator on Windows with IIS” on page 2-31.

Step 2 On the Select Web Server for Windows Platforms page, select Jakarta Tomcat v4.0.1. Then click Next.

Step 3 Continue with Step 11 on page 2-37 of “To Install PATROL Central Operator on Unix with Apache” through Step 13 on page 2-38.

BMC Software, Inc., Confidential and Proprietary Information

2-40 PATROL Central Operator – Web Edition Getting Started

Page 57: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Step 4 On the Configure PATROL Central - Web Edition for Tomcat Standalone page, specify the Tomcat user name. If you chose the Custom installation, also specify the port numbers for HTTP and HTTPS connections. Then click Next.

For more information, see “Web Server User Name and Group (Apache and Tomcat Only)” on page 2-17 and “Web Server HTTP and HTTPS Ports (Apache and Tomcat Only)” on page 2-24.

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-41

Page 58: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Step 5 On the Configure PATROL Central - Web Edition Tomcat Certificate page, specify the self-signed certificate information. Then click Next.

For more information, see “Certificate Information (Apache and Tomcat Only)” on page 2-20.

Step 6 Continue with Step 15 on page 2-39 of “To Install PATROL Central Operator on Windows with IIS” to the end of that procedure.

BMC Software, Inc., Confidential and Proprietary Information

2-42 PATROL Central Operator – Web Edition Getting Started

Page 59: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Installing PATROL Central Operator on Unix

Summary: This task describes how to install PATROL Central Operator, including all the components listed under “Installable Components” on page 2-9 on Unix.

This task assumes that you are installing all components listed under “Installable Components” on page 2-9.

If you install only some of the components, you might be asked for less configuration information. If you install other programs from the same CD at the same time, you will be asked for additional configuration information for those programs.

For more information on how to run the installation program, see the PATROL Installation Reference Manual.

This task applies to both a Typical and Custom installation; however, the screen captures reflect the Typical installation. If you choose a Custom installation, the screens will vary slightly.

Before You Begin

The following requirements must be met before you can run the installation:

• The computer must meet the requirements stated in “System Requirements” on page 2-10.

• You are logged on using the Web server account. For more information, see “Web Server User Name and Group (Apache and Tomcat Only)” on page 2-17.

• All of the ports to be used by the Web server are available.

BMC Software recommends having PATROL Console Server and RTserver installed in your environment (not necessarily the same computer) before installing PATROL Central Operator.

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-43

Page 60: 6010792 Patrol Central Operator Web Edition Geting Started 20899

The installation procedures for the Apache and Tomcat Web servers are slightly different.

To Install PATROL Central Operator on Unix with Apache

Step 1 Insert the product CD into the CD drive, mount to the CD drive, and run setup.sh. Then click Next to start the installation program.

Step 2 Review the license agreement. If you accept it, choose Accept. Then click Next.

Procedure Page

To Install PATROL Central Operator on Unix with Apache 2-44

To Install PATROL Central Operator on Unix with the Tomcat Standalone Web Server

2-56

BMC Software, Inc., Confidential and Proprietary Information

2-44 PATROL Central Operator – Web Edition Getting Started

Page 61: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Step 3 On the Select Installation Option page, choose I want to install products on this computer now. Then click Next.

For more information about creating an installable image, see the PATROL Installation Reference Manual.

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-45

Page 62: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Step 4 Om the Select Type of Installation page, choose Typical or Custom as the installation type. Then click Next.

For more information about the different types, see “Choosing a Typical or Custom Installation” on page 2-14.

BMC Software, Inc., Confidential and Proprietary Information

2-46 PATROL Central Operator – Web Edition Getting Started

Page 63: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Step 5 On the Specify Installation Directory page, specify the location where you want to install BMC Software products. Then click Next.

For more information about the installation directory, see “Installation Directory” on page 2-15.

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-47

Page 64: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Step 6 On the Select System Roles page, select Common Services as the system role. Then click Next.

BMC Software, Inc., Confidential and Proprietary Information

2-48 PATROL Central Operator – Web Edition Getting Started

Page 65: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Step 7 On the Select Products and Components to Install page, expand the PATROL Central - Web Edition folder and then select PATROL Central Console for Web and all Console Modules.

If you chose the Custom installation, you can select individual components instead. For more information, see “Installable Components” on page 2-9.

Step 8 If you chose the Custom installation, on the Select Level of Security screen, select the level of security that you want to use. Then click Next.

For more information, see “PATROL Security Information” on page 2-22.

Step 9 If you chose the Custom installation and selected Advanced security options, complete the security information. Then click Next.

For more information, see “PATROL Security Information” on page 2-22.

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-49

Page 66: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Step 10 If you chose the Custom installation, specify the sub-directory for PATROL Central. Then click Next.

For more information about this directory, see “PATROL Central Sub-directory” on page 2-22.

Step 11 On the Select Web Server for Unix Platforms page, choose Apache v1.3.26 as the Web server. Then click Next.

BMC Software, Inc., Confidential and Proprietary Information

2-50 PATROL Central Operator – Web Edition Getting Started

Page 67: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Step 12 On the Provide the System Root Account Properties page, type the Root login name and password. Then click Next.

NoteIf you chose the Custom installation, the pages for the Root login name and the PATROL Console Server are reversed.

For more information, see “Root Login and Password (Unix only)” on page 2-15.

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-51

Page 68: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Step 13 On the Configure PATROL Central - Web Edition page, specify the name of the PATROL Console Server to be used as the security server. Then click Next.

For more information about the installation directory, see “PATROL Console Server” on page 2-16.

Step 14 If you chose the Custom installation, specify the shutdown port number on which the Tomcat servlet container will listen for termination messages.

For more information, see “Tomcat Shutdown Port” on page 2-23.

BMC Software, Inc., Confidential and Proprietary Information

2-52 PATROL Central Operator – Web Edition Getting Started

Page 69: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Step 15 On the Apache HTTP Server Parameters page, specify the port numbers for HTTP and HTTPS connections, and the Apache user name and group. Then click Next.

For more information, see “Web Server User Name and Group (Apache and Tomcat Only)” on page 2-17 and “Web Server HTTP and HTTPS Ports (Apache and Tomcat Only)” on page 2-24.

Step 16 If you chose the Custom installation, specify if you want to automatically trim Apache log files and the maximum log file size. Then click Next.

For more information, see “Trimming Apache Web Server Log Files (Apache Only)” on page 2-24.

Step 17 If you chose the Custom installation, specify the AJP 13 port. Then click Next.

For more information, see “Apache-Jakarta Protocol Version 13 Port (IIS and Apache Only)” on page 2-23.

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-53

Page 70: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Step 18 On the Configure Apache Certificate page, specify the self-signed certificate information. Then click Next.

For more information, see “Certificate Information (Apache and Tomcat Only)” on page 2-20.

BMC Software, Inc., Confidential and Proprietary Information

2-54 PATROL Central Operator – Web Edition Getting Started

Page 71: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Step 19 On the RTSERVERS Variable Properties page, specify the RTserver to use. Then click Next.

For more information, see “RTserver” on page 2-21.

Step 20 On the Review Selections and Install page, review your product selections and configuration information. Click Back to make changes or click Start Install to complete the installation.

Step 21 Watch the Installation Status page to verify that the installation process completes successfully. When the installation is complete, click Next.

Step 22 On the SUCCESS page, if you want to review the installation log file, click View Log File. When you are done, click Finish.

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-55

Page 72: 6010792 Patrol Central Operator Web Edition Geting Started 20899

To Install PATROL Central Operator on Unix with the Tomcat Standalone Web Server

NoteIt is recommended that the Tomcat standalone Web server not be used for production environments.

Step 1 Complete Step 1 through Step 10 of “To Install PATROL Central Operator on Unix with Apache” on page 2-44.

Step 2 On the Select Web Server for Unix Platforms page, choose Jakarta Tomcat v4.0.1. Then click Next.

Step 3 Continue with Step 12 on page 2-51 of “To Install PATROL Central Operator on Unix with Apache” through Step 14 on page 2-52.

BMC Software, Inc., Confidential and Proprietary Information

2-56 PATROL Central Operator – Web Edition Getting Started

Page 73: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Step 4 On the Configure PATROL Central - Web Edition for Tomcat Standalone page, specify the Tomcat user name and group. If you chose the Custom installation, also specify the port numbers for HTTP and HTTPS connections. Then click Next.

For more information, see “Web Server User Name and Group (Apache and Tomcat Only)” on page 2-17 and “Web Server HTTP and HTTPS Ports (Apache and Tomcat Only)” on page 2-24.

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-57

Page 74: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Step 5 On the Configure PATROL Central - Web Edition Tomcat Certificate page, specify the self-signed certificate information. Then click Next.

For more information, see “Certificate Information (Apache and Tomcat Only)” on page 2-20.

Step 6 Continue with Step 19 on page 2-55 of “To Install PATROL Central Operator on Unix with Apache” to the end of that procedure.

BMC Software, Inc., Confidential and Proprietary Information

2-58 PATROL Central Operator – Web Edition Getting Started

Page 75: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Directory Structure

The following table describes the directories used by PATROL Central.

NoteThese directories refer to the webcentral sub-directory of $BMC_ROOT. By default, this directory is WebCentral on Windows, and webcentral on Unix. However, a different name for this directory could have been specified in the installation. For more information see, “PATROL Central Sub-directory” on page 2-22.

Directory Description

$BMC_ROOT This directory is where BMC Software products are installed.

$BMC_ROOT\common This directory contains common components that are shared by multiple PATROL 7.x products, such as security files.

$BMC_ROOT\Install This directory contains information about which components and products are installed.

$BMC_ROOT\Uninstall This directory contains files for uninstalling components and products.

$BMC_ROOT\WebCentral This directory is where PATROL Central is installed.

$BMC_ROOT\WebCentral\tomcat401 This directory is where the Tomcat servlet container (and Tomcat Web server) are installed.

$BMC_ROOT\WebCentral\tomcat401\bin This directory contains binary files.

$BMC_ROOT\WebCentral\tomcat401\logs This directory contains log files.

$BMC_ROOT\WebCentral\tomcat401\webapps\patrol\WEB-INF

This directory contains configuration files.

$BMC_ROOT\WebCentral\tomcat401\conf This directory contains configuration files.

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-59

Page 76: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Backing Up and Restoring PATROL Central and Console Modules

PATROL Central and the PATROL Central Operator and PATROL Central Administration console modules maintain preferences and administrative settings in a datastore. To backup the datastore, back up the following files in the $BMC_ROOT/webcentral/tomcat401/webapps/patrol/WEB-INF directory:

• wc.backup • wc.data • wc.properties • wc.script

The PATROL Central Operator and PATROL Central Administration console modules also store data on the PATROL Console Server. For information about the PATROL Console Server, see the PATROL Console Server and RTserver Getting Started.

To restore PATROL Central and the PATROL Central Operator and PATROL Central Administration console modules, reinstall them, and replace the backed-up versions of the datastore files.

WarningWhen restoring PATROL Central and the PATROL Central Operator and PATROL Central Administration console modules, reinstall all of the console modules that were originally installed, and only those console modules. If you reinstall a different set of console modules, and then restore the datastore files, the PATROL Central Web page will not display the correct tabs. You can install or uninstall console modules after restoring the datastore files.

TipTo make reinstalling easier, record the answers to installation questions on the installation worksheets. See “Installation Worksheets” on page 2-25. Also record any changes made to the startup configuration file. See Appendix C, “Modifying Initialization Settings After Installation.”

BMC Software, Inc., Confidential and Proprietary Information

2-60 PATROL Central Operator – Web Edition Getting Started

Page 77: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Where to Go from Here

Before you can monitor and manage with PATROL Central Operator, other PATROL programs, computers, and the Web server must be running and configured to work with PATROL Central Operator. For more information, see Chapter 3, “Configuring Your Environment for PATROL Central Operator and Running the Web Server.”

BMC Software, Inc., Confidential and Proprietary Information

Installing PATROL Central Operator 2-61

Page 78: 6010792 Patrol Central Operator Web Edition Geting Started 20899
BMC Software, Inc., Confidential and Proprietary Information

2-62 PATROL Central Operator – Web Edition Getting Started

Page 79: 6010792 Patrol Central Operator Web Edition Geting Started 20899

3

Configuring Your Environment for PATROL Central Operator and Running the Web Server 3

This chapter provides information for PATROL administrators about configuring the PATROL environment for PATROL Central Operator and starting programs, including the Web server.

This chapter discusses the following topics:

Setting Up User Accounts and Groups . . . . . . . . . . . . . . . . . . . . . . . 3-2User Accounts and Groups on the PATROL Console Server . . . 3-2User Accounts on Managed Systems . . . . . . . . . . . . . . . . . . . . . 3-4General Guidelines for Setting Up User Accounts and Groups . 3-5About PATROL Central Administration . . . . . . . . . . . . . . . . . . . 3-7Starting PATROL Central Administration . . . . . . . . . . . . . . . . . 3-8

Starting Related Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8Starting and Stopping the RTserver . . . . . . . . . . . . . . . . . . . . . . 3-9Starting the PATROL Agent . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11Starting the PATROL Console Server . . . . . . . . . . . . . . . . . . . . . 3-13Managing Services on Windows . . . . . . . . . . . . . . . . . . . . . . . . . 3-15

Starting and Stopping the Web Server . . . . . . . . . . . . . . . . . . . . . . . . 3-16Starting and Stopping the Tomcat Servlet Container for the

IIS Web Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17Starting and Stopping the Apache Web Server . . . . . . . . . . . . . . 3-18Starting and Stopping the Tomcat Standalone Web Server . . . . 3-19Verifying the Installation and Execution of the Web Server and

Related Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-20

BMC Software, Inc., Confidential and Proprietary Information

Configuring Your Environment for PATROL Central Operator and Running the Web Server 3-1

Page 80: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Where to Go from Here . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-21

Setting Up User Accounts and Groups

The PATROL 7.x architecture requires that user accounts and groups be set up for the PATROL Console Servers and managed systems.

User Accounts and Groups on the PATROL Console Server

The PATROL 7.x architecture uses operating system user accounts and groups on the PATROL Console Server to control privileges and rights for PATROL. Accounts can be local accounts or domain accounts. A privilege allows a user to access specific console functionality. A right allows a user to access specific PATROL objects. A PATROL user cannot access functionality or objects without the appropriate privileges and rights.

Users inherit the privileges and rights of the groups to which they belong, including nested groups. Usually it is easier to add users to the appropriate groups in the operating system than to administer privileges and rights for users directly. The following table lists the groups with predefined privileges and rights. If these groups do not already exist, they are created when you install the PATROL Console Server.

Group Description

patop standard PATROL operators

patpop power operators

patwatch operators who can only watch console objects

patadm standard PATROL administrators

patscadm PATROL administrators who can configure security

BMC Software, Inc., Confidential and Proprietary Information

3-2 PATROL Central Operator – Web Edition Getting Started

Page 81: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Step 1 Add the account for each user of PATROL Central to the appropriate group on the default PATROL Console Server computer.

Step 2 If you are using additional PATROL Console Servers with PATROL Central Operator, also add the account for each user to the appropriate group on those PATROL Console Servers.

TipOnly the privileges and rights on the relevant PATROL Console Server are used. For example, a user who is a member of the patscadm group on only one PATROL Console Server can configure security on only that PATROL Console Server.

When a user connects to the PATROL Console Server from a console, the user logs on with an operating system account. The PATROL Console Server uses the operating system account to identify the user, the groups that the user belongs to, and the PATROL privileges and rights that the user has.

You set up user accounts and groups in the operating system for the PATROL Console Server. You change privileges and rights of groups or individual users by using PATROL Central Administration. For more information, see “About PATROL Central Administration” on page 3-7.

BMC Software, Inc., Confidential and Proprietary Information

Configuring Your Environment for PATROL Central Operator and Running the Web Server 3-3

Page 82: 6010792 Patrol Central Operator Web Edition Geting Started 20899

User Accounts on Managed Systems

The PATROL 7.x architecture uses operating system accounts on each managed system and uses an impersonation table in the PATROL Console Server to control access to each managed system. Users can access a managed system only in the following situations:

• The user logs on to the PATROL Console Server with a domain account that is also known to the managed system.

• The user logs on to the PATROL Console Server with a local account, and the managed system has an account with an identical user name and password.

• The impersonation table in the PATROL Console Server is set up to provide an alias for the user to a user account on the managed system.

• The user has an account on the managed system and enters the username and password when adding the managed system.

You set up user accounts in the operating system for each computer. You set up the impersonation table in the PATROL Console Server with PATROL Central Administration. For more information, see “About PATROL Central Administration” on page 3-7.

BMC Software, Inc., Confidential and Proprietary Information

3-4 PATROL Central Operator – Web Edition Getting Started

Page 83: 6010792 Patrol Central Operator Web Edition Geting Started 20899

General Guidelines for Setting Up User Accounts and Groups

You can use various strategies for setting up user accounts and groups on the PATROL Console Server and managed systems. Use the following questions as guidelines for setting up user accounts and groups:

• Do you want to use local accounts or domain accounts?

If you use domain accounts that are known to both the PATROL Console Server and managed systems, you do not have to use the impersonation table. If you use local accounts for managed systems, you might have to create aliases to those accounts in the impersonation table in the PATROL Console Server.

• Do you want to create multiple accounts in the operating system for each managed system?

If you want multiple users to share the same account on a managed system, you can create aliases to that account in the impersonation table in the PATROL Console Server.

• Do you want users to be able to access managed systems that they do not have accounts on?

If so, you will have to set up user accounts on the managed systems and then create aliases to them in the impersonation table in the PATROL Console Server.

The following process describes one method of setting up user accounts and groups:

1. In the operating system of the PATROL Console Server, create an account for each user and add each account to the appropriate group or groups listed in the table under “User Accounts and Groups on the PATROL Console Server” on page 3-2. This user account can be a local account or a domain account.

2. In the operating system of each managed system, create one or more operating system accounts for use by PATROL.

BMC Software, Inc., Confidential and Proprietary Information

Configuring Your Environment for PATROL Central Operator and Running the Web Server 3-5

Page 84: 6010792 Patrol Central Operator Web Edition Geting Started 20899

3. (Optional) In PATROL Central Administration, set up the impersonation table to provide alias accounts on the PATROL Console Server to accounts on the managed systems.

If you do not set up the impersonation table, you will have to manually enter a username and password for each managed system as you add it and each time you log back in and reconnect.

TipIf you use multiple PATROL Console Servers, set up the impersonation table on each PATROL Console Server separately.

Only the impersonation table on the corresponding PATROL Console Server is used. For example, suppose a user logs on to PATROL Central with an account on the PATROL Console Server used by PATROL Central, then, in PATROL Central Operator, opens a management profile on a different PATROL Console Server. When the user tries to access a managed system in the management profile, the impersonation table on only the second PATROL Console Server is used.

BMC Software, Inc., Confidential and Proprietary Information

3-6 PATROL Central Operator – Web Edition Getting Started

Page 85: 6010792 Patrol Central Operator Web Edition Geting Started 20899

About PATROL Central Administration

PATROL Central Administration is a console module that works within the PATROL Central console infrastructure to control user access to PATROL.

You use PATROL Central Administration in the following cases:

• You want to set up impersonation tables so that users do not have to enter account information for managed systems.

• You want to control privileges using groups other than the default groups, or the default privileges for those groups do not fit your needs.

• You want to change the access rights to individual PATROL objects. For example, you want to make a management profile available to more users, or you want to prevent users from accessing a specific object.

For more information, see the PATROL Central Administration online Help.

BMC Software, Inc., Confidential and Proprietary Information

Configuring Your Environment for PATROL Central Operator and Running the Web Server 3-7

Page 86: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Starting PATROL Central Administration

Summary: This task describes how to start the Web Edition of PATROL Central Administration.

Before You Begin

You must be a member of the patscadm group on the PATROL Console Server.

To Start PATROL Central Administration

Step 1 If you have not yet started the PATROL Central console infrastructure, start it.

See “Accessing PATROL Central” on page 4-6.

Step 2 In the navigation area, click the Administration tab.

Starting Related Programs

This section contains the basic steps for starting the following related programs in the PATROL 7.x architecture and verifying that they are running:

• RTserver• PATROL Agent• PATROL Console Server

BMC Software, Inc., Confidential and Proprietary Information

3-8 PATROL Central Operator – Web Edition Getting Started

Page 87: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Starting and Stopping the RTserver

Summary: By default, the RTserver is started automatically as a service when you install it. However, you can start it manually. This task describes how to start the RTserver on both Windows and Unix and verify that it is running.

NoteFor more information on starting the RTserver, see the PATROL Console Server and RTserver Getting Started.

Execution of RTserver on Windows

» Start, stop, or verify the execution of the SmartSockets RTserver service.

For more information, see “Managing Services on Windows” on page 3-15.

To Manually Start the RTserver on Unix

Step 1 Change to the $BMC_ROOT/common/smartsockets directory.

Step 2 Enter the following command:

./start_rtserver.sh

To Verify That RTserver Is Running on Unix

Step 1 Enter the following command:

ps -ef | grep rtserver

Step 2 Look for the rtserver process.

BMC Software, Inc., Confidential and Proprietary Information

Configuring Your Environment for PATROL Central Operator and Running the Web Server 3-9

Page 88: 6010792 Patrol Central Operator Web Edition Geting Started 20899

To Stop RTserver on Unix

Step 1 Change to the $BMC_ROOT/common/smartsockets directory.

Step 2 Enter the following command:

./stop_rtserver.sh

BMC Software, Inc., Confidential and Proprietary Information

3-10 PATROL Central Operator – Web Edition Getting Started

Page 89: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Starting the PATROL Agent

Summary: By default, the PATROL Agent is started automatically as a service when you install it. However, you can start it manually. This task describes how to start the PATROL Agent on both Windows and Unix and verify that it is running.

NoteFor more information on starting the PATROL Agent, see the PATROL Agent Reference Manual.

You must enable the PATROL Agent 3.5 to communicate with the RTserver before you can use PATROL Central Operator to monitor it. For more information, see PATROL Console Server and RTserver Getting Started.

Execution of the PATROL Agent on Windows

» Start, stop, or verify the execution of the PatrolAgent service.

For more information, see “Managing Services on Windows” on page 3-15.

To Manually Start the PATROL Agent on Unix

Step 1 Change to the $BMC_ROOT/patrol3 directory.

Step 2 Enter the following command:

./PatrolAgent

BMC Software, Inc., Confidential and Proprietary Information

Configuring Your Environment for PATROL Central Operator and Running the Web Server 3-11

Page 90: 6010792 Patrol Central Operator Web Edition Geting Started 20899

To Verify That PATROL Agent Is Running on Unix

Step 1 Enter the following command:

ps -ef | grep PatrolAgent

Step 2 Look for the PatrolAgent process.

To Stop the PATROL Agent on Unix

Step 1 Type the following at the command line:

ps -ef | grep PatrolAgent

Step 2 Identify the process ID number of the PATROL Agent that you would like to shut down from the list.

Step 3 Type the following command, where process_ID_number is the process ID number of the PATROL Agent.

kill process_ID_number

BMC Software, Inc., Confidential and Proprietary Information

3-12 PATROL Central Operator – Web Edition Getting Started

Page 91: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Starting the PATROL Console Server

Summary: By default, the PATROL Console Server is started automatically as a service when you install it. However, you can start it manually. This task describes how to start PATROL Console Server on both Windows and Unix and verify that it is running.

NoteFor more information on starting PATROL Console Server, see the PATROL Console Server and RTserver Getting Started.

Execution of the PATROL Console Server on Windows

» Start, stop, or verify the execution of the PATROL Console Server service.

For more information, see “Managing Services on Windows” on page 3-15.

To Manually Start the PATROL Console Server on Unix

Step 1 Change to the $PATROL_ROOT directory.

Step 2 Enter the following command:

./start_cserver.sh

To Verify That PATROL Console Server Is Running on Unix

Step 1 Enter the following:

ps -ef | grep cserver

Step 2 Look for the cserver process.

BMC Software, Inc., Confidential and Proprietary Information

Configuring Your Environment for PATROL Central Operator and Running the Web Server 3-13

Page 92: 6010792 Patrol Central Operator Web Edition Geting Started 20899

To Stop the PATROL Console Server on Unix

Step 1 Change to the $PATROL_ROOT directory.

Step 2 Enter the following command:

./stop_cserver.sh

BMC Software, Inc., Confidential and Proprietary Information

3-14 PATROL Central Operator – Web Edition Getting Started

Page 93: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Managing Services on Windows

Summary: On Windows, you use the Services dialog box to start, stop, and verify the execution of services.

To Open the Services Dialog Box on Windows NT

Step 1 For Windows NT, choose Start => Settings => Control Panel.

Step 2 Double-click the Services icon.

To Open the Services Dialog Box on Windows 2000

Step 1 For Windows 2000, choose Start => Settings => Control Panel => Administrative Tools.

Step 2 Double-click the Services icon.

To Start a Service

Step 1 Open the Services dialog box.

Step 2 Select the name of the service.

Step 3 For Windows NT, click Start.

For Windows 2000, choose Action => Properties, then click Start.

To Verify that a Service is Running

Step 1 Open the Services dialog box.

Step 2 Look at the status of the service.

BMC Software, Inc., Confidential and Proprietary Information

Configuring Your Environment for PATROL Central Operator and Running the Web Server 3-15

Page 94: 6010792 Patrol Central Operator Web Edition Geting Started 20899

To Stop a Service

Step 1 Open the Services dialog box.

Step 2 Select the name of the service.

Step 3 For Windows NT, click Stop.

For Windows 2000, choose Action => Properties, then click Stop.

Starting and Stopping the Web Server

This section contains the basic steps for starting, stopping, and verifying the execution of the Web server and the Tomcat servlet container.

NoteThese procedures refers to the webcentral sub-directory of $BMC_ROOT. By default, this directory is WebCentral on Windows, and webcentral on Unix. However, a different name for this directory could have been specified in the installation. For more information see, “PATROL Central Sub-directory” on page 2-22.

BMC Software, Inc., Confidential and Proprietary Information

3-16 PATROL Central Operator – Web Edition Getting Started

Page 95: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Starting and Stopping the Tomcat Servlet Container for the IIS Web Server

Summary: You must start IIS and the Tomcat servlet container separately. By default, the Tomcat servlet container is started automatically as a service when it is installed. However you can also start it manually. This task describes how to start the Tomcat servlet container.

NoteFor information on starting, stopping, and verifying the execution of IIS, see the documentation for that product.

Execution of the Tomcat Servlet Container as a Service

» Start, stop, or verify the execution of the PATROLCentral-WebEdition service.

For more information, see “Managing Services on Windows” on page 3-15.

To Manually Start the Tomcat Servlet Container

» Run %BMC_ROOT%\WebCentral\tomcat401\bin\pwcstart.bat.

BMC Software, Inc., Confidential and Proprietary Information

Configuring Your Environment for PATROL Central Operator and Running the Web Server 3-17

Page 96: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Starting and Stopping the Apache Web Server

Summary: You control the execution of Apache and the Tomcat servlet container together. This task describes how to start them.

To Start or Stop the Apache Web Server on Unix

Step 1 Change to the root user.

Step 2 Change to the $BMC_ROOT/webcentral/bin directory.

Step 3 Enter the ./pwcctl command, followed by the appropriate command line option from the table below.

Option Description

start This option starts the Web server.

stop This option stops the Web server.

status This option checks the status of the ports used by the Web server.

BMC Software, Inc., Confidential and Proprietary Information

3-18 PATROL Central Operator – Web Edition Getting Started

Page 97: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Starting and Stopping the Tomcat Standalone Web Server

Summary: You run the Tomcat standalone Web server and Tomcat servlet container together. On Windows, they are started automatically as a service when it is installed by default. However you can also start it manually. This task describes how to start the Tomcat Web server on both Windows and Unix and verify that it is running.

Execution of the Tomcat Web Server on Windows as a Service

» Start, stop, or verify the execution of the PATROLCentral-WebEdition service.

For more information, see “Managing Services on Windows” on page 3-15.

To Manually Start the Tomcat Web Server on Windows

» Run %BMC_ROOT%\WebCentral\tomcat401\bin\pwcstart.bat.

To Start or Stop the Tomcat Web Server on Unix

Step 1 Change to the $BMC_ROOT/webcentral/bin directory.

Step 2 Enter the ./pwcctl command, followed by the appropriate command line option from the table below.

Option Description

start This option starts the Web server.

stop This option stops the Web server.

status This option checks the status of the ports used by the Web server.

BMC Software, Inc., Confidential and Proprietary Information

Configuring Your Environment for PATROL Central Operator and Running the Web Server 3-19

Page 98: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Verifying the Installation and Execution of the Web Server and Related Components

You can verify that the Web Server, Tomcat servlet container, RTserver, and PATROL Console Server are running by viewing the URLs in the table below.

In the URL to view, hostname is the name of the Web site. Typically, this is the name of the computer on which the Web server for PATROL Central is running.

If the Web server is not using the default port for HTTP, include the port number in the URL. For example, if the Web server myserver is using port 8080, view the URL http://myserver:8080.

What to Verify URL to View Comments

Is the Web server running?

http://hostname If the default page for the Web server is displayed, the Web server is running.

Is HTTPS active for the Web server?

https://hostname If the default page for the Web server is displayed, HTTPS is active.

Is the Tomcat servlet container running?

Are the RTserver and PATROL Console Server available?

http://hostname/patrol If the PATROL Central page is displayed, the Tomcat servlet container is running.

If the log on screen is displayed, the RTserver and PATROL Console Server are available.

BMC Software, Inc., Confidential and Proprietary Information

3-20 PATROL Central Operator – Web Edition Getting Started

Page 99: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Where to Go from Here

For information about... See...

monitoring and managing with PATROL Central Operator

Chapter 4, “Monitoring and Managing Your Enterprise with PATROL Central Operator”

using both PATROL 3.x console and PATROL Central Operator, or moving from a PATROL 3.x console

Chapter 5, “Using the PATROL 3.x and PATROL 7.x Consoles”

BMC Software, Inc., Confidential and Proprietary Information

Configuring Your Environment for PATROL Central Operator and Running the Web Server 3-21

Page 100: 6010792 Patrol Central Operator Web Edition Geting Started 20899
BMC Software, Inc., Confidential and Proprietary Information

3-22 PATROL Central Operator – Web Edition Getting Started

Page 101: 6010792 Patrol Central Operator Web Edition Geting Started 20899

4

Monitoring and Managing Your Enterprise with PATROL Central Operator 4

This chapter contains information for monitoring and managing your enterprise with Web Edition of PATROL Central Operator. This chapter contains information for both users and administrators of PATROL Central Operator. This chapter discusses the following topics:

Web Browser Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2Solaris OS Patches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3About the Java Plugin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3About Installing or Accepting the Certificate . . . . . . . . . . . . . . . 4-5

Setting Up Your Monitoring Environment . . . . . . . . . . . . . . . . . . . . 4-5Accessing PATROL Central . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6The PATROL Central Console Infrastructure . . . . . . . . . . . . . . . 4-7Accessing PATROL Central Operator . . . . . . . . . . . . . . . . . . . . . 4-9About Your Management Profile . . . . . . . . . . . . . . . . . . . . . . . . 4-11Connecting to a PATROL Console Server and Selecting a

Management Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12Adding Managed Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16Loading PATROL KMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-19

Where to Go From Here . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22

BMC Software, Inc., Confidential and Proprietary Information

Monitoring and Managing Your Enterprise with PATROL Central Operator 4-1

Page 102: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Web Browser RequirementsYou do not need to install any PATROL components on client computers. Users access PATROL Central and its console modules through a Web browser on the client computer.

The following table lists the required Web browsers.

The Web browser also must have the Java Plugin (JRE) version 1.3.1_04. See “About the Java Plugin” on page 4-3 for more information.

Platform Web Browser

Red Hat Linux 6.2Red Hat Linux 7.1Red Hat Linux 7.2Solaris 2.7 / 7Solaris 8

Netscape 4.76a

Netscape 4.77a (English only)

a These versions of Netscape have been tested for limited compatibility and are considered tolerant of PATROL Central. However, you might experience stability and response time issues. These issues are most prominent during active sessions containing large numbers of managed systems, PATROL objects, or both.

Windows 2000 Advanced Server - SP2Windows 2000 Datacenter Server - SP2Windows 2000 Server - SP2Windows 2000 Professional - SP2Windows NT 4 Enterprise Edition - SP6AWindows NT 4 Server - SP6A

Internet Explorer 5.0, 5.5, 6.0Netscape 4.751 - 4.77a

BMC Software, Inc., Confidential and Proprietary Information

4-2 PATROL Central Operator – Web Edition Getting Started

Page 103: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Solaris OS Patches

The latest patches for Solaris must also be installed, including the J2SE patch cluster for your version of Solaris.

These patches can be retrieved from the Solaris maintenance Web site at http://sunsolve.sun.com.

WarningThe patches are necessary to address multiple problems that can range from subtle usage problems to crashes.

About the Java Plugin

PATROL Central requires a Java Plugin (JRE) version 1.3.1_04 installed on the client computer. The Java Plugin retrieves and runs the many Java applets in PATROL Central.

About Installing the Java Plugin

The Java Plugin must be installed on the client computer in order to use PATROL Central.

On Windows, if the Java Plugin is not already installed on the client computer when you first access the PATROL Central Web site, PATROL Central will attempt to automatically download it from the Web server and install it. If it cannot be automatically downloaded, a page with a link for downloading it from the Web server is displayed.

On Unix, if the Java Plugin is not installed, a page with a link for downloading it from the Web server is displayed.

TipIf you must manually install the Java Plugin, click the link to download the Java Plugin and follow the instructions on the screen to ensure that you install the appropriate version for PATROL Central.

BMC Software, Inc., Confidential and Proprietary Information

Monitoring and Managing Your Enterprise with PATROL Central Operator 4-3

Page 104: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Avoiding Conflicts with Other Desktop Applications

Some of your desktop applications might use a different version of the Java Plugin from the version used by PATROL Central, which can cause problems if each application does not use its corresponding version of the Java Plugin.

For example, if an existing application uses an older version of the Java Plugin, you might experience problems with that application after you install the Java Plugin for PATROL Central. Similarly, if you later install an application that uses a different version of the Java Plugin from PATROL Central, you might experience problems with PATROL Central.

Avoiding Conflicts When Using Internet Explorer

To avoid these problems when using Internet Explorer, perform the following steps:

Step 1 From the Internet Explorer menu, choose Tools => Internet Options.

Step 2 Click the Advanced tab.

Step 3 Scroll to the Java (Sun) section.

Step 4 Clear the Use Java 2 v1.3.1_04 for <applet> (requires restart) check box.

Step 5 Click OK.

Avoiding Conflicts When Using Netscape on Unix

To avoid these problems when using Netscape on Unix, ensure that the $NPX_PLUGIN_PATH environment variable points to the location of the javaplugin.so file for the correct installation of the Java Plugin, before you access PATROL Central. For example, the correct version of the Java Plugin is installed in the /local/myuser/jre1.3.1_04 directory, the path would be /local/myuser/jre1.3.1_04/plugin/i386/ns4.

BMC Software, Inc., Confidential and Proprietary Information

4-4 PATROL Central Operator – Web Edition Getting Started

Page 105: 6010792 Patrol Central Operator Web Edition Geting Started 20899

About Installing or Accepting the Certificate

Internet Explorer and Netscape contain a list of prominent certificate authorities. If the certificate on the Web server is not signed by one of these certificate authorities, or another certificate authority known to the Web browser on the client computer, the Web browser will notify you when you access the PATROL Central Web page. For example, if the Web server uses the default self-signed certificate on Apache, the Web browser will notify you.

You must accept the certificate in order to use PATROL Central. You can accept the certificate for all sessions by installing the certificate or you can choose to accept it for just the current session. If you install the certificate, you will not be prompted to accept the certificate again. How you accept or install the certificate depends on the Web browser.

Setting Up Your Monitoring Environment

To begin monitoring your environment with PATROL Central Operator, you must complete the following process:

1. Start and log on to the PATROL Central console infrastructure.

2. Connect to the PATROL Console Server and select or create a management profile.

3. Add the managed systems that you want to monitor.

4. Load the PATROL KMs that you want to monitor.

TipIf you currently use the PATROL Console for Windows or the PATROL Console for Unix, see Chapter 5, “Using the PATROL 3.x and PATROL 7.x Consoles” for a list of differences between the classic consoles and PATROL Central Operator.

BMC Software, Inc., Confidential and Proprietary Information

Monitoring and Managing Your Enterprise with PATROL Central Operator 4-5

Page 106: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Accessing PATROL Central

Summary: This task describes how to access PATROL Central by using your Web browser.

To Access PATROL Central

Step 1 Start your Web browser application.

Step 2 In the Address or Location field, enter the following URL, where hostname is typically the name of the computer on which the Web server for PATROL Central is running.

http://hostname/patrol

If the Web server is not using the default port for HTTP, include the port number in the URL. For example, if the Web server myserver is using port 8080, view the URL http://myserver:8080.

If the Java Plugin is not installed on the client computer, see “About the Java Plugin” on page 4-3 for more information.

If the Web browser notifies you that it does not recognize the certificate for the Web server, see “About Installing or Accepting the Certificate” on page 4-5 for more information.

You are prompted to log on to your security server.

Step 3 Type your user name and password for the security server and click OK.

The home page for PATROL Central is displayed. See Figure 4-1 on page 4-8.

BMC Software, Inc., Confidential and Proprietary Information

4-6 PATROL Central Operator – Web Edition Getting Started

Page 107: 6010792 Patrol Central Operator Web Edition Geting Started 20899

The PATROL Central Console Infrastructure

The interface provided by the Web Edition of the PATROL Central is composed of the major areas in the following table:

Area Description

navigation area The navigation area is located at the top of the PATROL Central interface. The navigation area is composed of the console module tabs, subtabs, and toolbar items. For each console module installed, one or more tabs, representing an area of functionality, are added to the navigation area.

list or tree view area The list or tree view area is located on the left side of the PATROL Central interface. This area may display a list or tree view of objects.

results area The results area is typically located on the right side of the PATROL Central interface. The results area displays information as you browse the tabs or select objects from the list or tree view area.

status area The status area is located on the lower right corner of the PATROL Central interface. The status area provides information about your connection to PATROL Console Servers, RTservers, and system messages from PATROL Central Operator, as well as other console modules.

BMC Software, Inc., Confidential and Proprietary Information

Monitoring and Managing Your Enterprise with PATROL Central Operator 4-7

Page 108: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Figure 4-1 shows the default home page for PATROL Central.

Figure 4-1 The PATROL Central Home Page

Status Area

List or Tree View Area

Navigation Area

Results Area

BMC Software, Inc., Confidential and Proprietary Information

4-8 PATROL Central Operator – Web Edition Getting Started

Page 109: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Accessing PATROL Central Operator

Summary: This task describes how to access PATROL Central Operator.

Before You Begin

You must have accessed PATROL Central and logged on to your security server. See page 4-6.

To Access PATROL Central Operator

» In the navigation area, click the Operator tab.

The PATROL Central Operator General Tasks page is displayed.

BMC Software, Inc., Confidential and Proprietary Information

Monitoring and Managing Your Enterprise with PATROL Central Operator 4-9

Page 110: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Figure 4-2 The PATROL Central Operator General Tasks Page

If this is the first time that you have accessed PATROL Central Operator, the Open Management Profile wizard is displayed. The wizard will help you to connect to a PATROL Console Server, and to choose an existing or set up a new management profile. See “Connecting to a PATROL Console Server and Selecting a Management Profile” on page 4-12.

The next time you access PATROL Central Operator, your last management profile will automatically be opened.

At any time, you can navigate from within PATROL Central Operator back to the General Tasks page by clicking the General Tasks icon in the navigation area.

BMC Software, Inc., Confidential and Proprietary Information

4-10 PATROL Central Operator – Web Edition Getting Started

Page 111: 6010792 Patrol Central Operator Web Edition Geting Started 20899

About Your Management Profile

PATROL Central Operator stores the following information in your management profile:

• the managed systems you have added• the PATROL KMs you have loaded• your arrangement of objects in the hierarchy• event filters• managed system queries• user-created objects (folders, charts, custom views, shortcuts to

objects)

PATROL Central Operator automatically saves changes to your management profile as you make them. You do not need to manually save changes to your management profile.

Because management profiles are stored on the PATROL Console Server, you can access your management profile from any computer running PATROL Central Operator by connecting to the same PATROL Console Server.

NoteIf you use the PATROL Console for Windows, the PATROL Console for Unix, or both, a management profile contains information similar to a desktop file. For more information, see Chapter 5, “Using the PATROL 3.x and PATROL 7.x Consoles.”

BMC Software, Inc., Confidential and Proprietary Information

Monitoring and Managing Your Enterprise with PATROL Central Operator 4-11

Page 112: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Connecting to a PATROL Console Server and Selecting a Management Profile

Summary: This task describes how to run the Open Management Profile wizard to connect to a PATROL Console Server and select a management profile.

The first time that you access PATROL Central Operator, the Open Management Profile wizard is displayed for you to specify which PATROL Console Server and management profile you want to use. The next time that you start PATROL Central Operator, it will automatically connect to the last PATROL Console Server and management profile that you used. You can also change PATROL Console Servers or management profiles at any time.

Before You Begin

You must have performed the following tasks.

1. Accessed PATROL Central. See page 4-6.

2. Accessed the PATROL Central Operator General Tasks page. See page 4-9.

BMC Software, Inc., Confidential and Proprietary Information

4-12 PATROL Central Operator – Web Edition Getting Started

Page 113: 6010792 Patrol Central Operator Web Edition Geting Started 20899

To Run the Open Management Profile Wizard

Step 1 On the PATROL Central Operator General Tasks page, click Open Management Profile.

The Console Server Service Name page of the Open Management Profile wizard is displayed.

BMC Software, Inc., Confidential and Proprietary Information

Monitoring and Managing Your Enterprise with PATROL Central Operator 4-13

Page 114: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Step 2 From the Service Name drop-down list, choose the PATROL Console Server to use. Then click Next.

Step 3 The Management Profile Name page of the Open Management Profile wizard is displayed.

BMC Software, Inc., Confidential and Proprietary Information

4-14 PATROL Central Operator – Web Edition Getting Started

Page 115: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Step 4 Perform one of the following actions:

• Type a name for a new management profile and click Next.

• Select an existing management profile and click Next.

NoteIf you select an existing management profile that is currently opened by another user, you can choose to open it as read-only. If you open it as read-only, you will not be able to make any changes, such as adding managed systems or loading KMs. For more information about read-only management profiles, see the PATROL Central Operator – Web Edition online Help.

Step 5 Click Finish.

PATROL Central Operator connects to the PATROL Console Server and opens the management profile.

BMC Software, Inc., Confidential and Proprietary Information

Monitoring and Managing Your Enterprise with PATROL Central Operator 4-15

Page 116: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Adding Managed Systems

Summary: This task describes how to add managed systems for monitoring by using the Add Managed Systems wizard.

After you connect to a PATROL Console Server, you must specify which managed systems (computers running the PATROL Agent software) you want to monitor. You can also add new managed systems at any time.

Before You Begin

You must have performed the following tasks.

1. Accessed PATROL Central. See page 4-6.

2. Accessed the PATROL Central Operator General Tasks page. See page 4-9.

3. Connected to the PATROL Console Server and select a management profile. See page 4-12.

BMC Software, Inc., Confidential and Proprietary Information

4-16 PATROL Central Operator – Web Edition Getting Started

Page 117: 6010792 Patrol Central Operator Web Edition Geting Started 20899

To Add Managed Systems

Step 1 On the PATROL Central Operator General Tasks page, click Add Managed Systems.

The Selecting Managed Systems page of the Add Managed Systems wizard is displayed.

TipTo select multiple managed systems, hold down the Ctrl key, and click each item you want to select. To select a range of managed systems, click the first one, then hold down the Shift key as you click the last one in the range. To select all managed systems, press Ctrl+a.

BMC Software, Inc., Confidential and Proprietary Information

Monitoring and Managing Your Enterprise with PATROL Central Operator 4-17

Page 118: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Step 2 From the list of discovered systems, choose the systems that you want to monitor. Then click Next.

NoteDepending on how user accounts are set up on the PATROL Console Server and the individual managed systems, you might be prompted for a username and password for some managed systems. For more information, see “Setting Up User Accounts and Groups” on page 3-2.

A confirmation page is displayed.

Step 3 Click Finish to close the wizard.

The managed systems are displayed in the tree view and added to your management profile.

BMC Software, Inc., Confidential and Proprietary Information

4-18 PATROL Central Operator – Web Edition Getting Started

Page 119: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Loading PATROL KMs

Summary: This task describes how to load PATROL KMs by using the Load Knowledge Module(s) wizard.

After you add managed systems, you must specify which PATROL KMs you want to load for those managed systems. You can also load additional PATROL KMs at any time.

Before You Begin

You must have performed the following tasks.

1. Accessed PATROL Central. See page 4-6.

2. Accessed the PATROL Central Operator General Tasks page. See page 4-9.

3. Connected to the PATROL Console Server and select a management profile. See page 4-12.

4. Added the managed systems that you want to monitor. See page 4-16.

BMC Software, Inc., Confidential and Proprietary Information

Monitoring and Managing Your Enterprise with PATROL Central Operator 4-19

Page 120: 6010792 Patrol Central Operator Web Edition Geting Started 20899

To Load KM(s)

Step 1 On the PATROL Central Operator General Tasks page, click Load Knowledge Modules.

The Selecting Managed Systems page of the Loading Knowledge Modules wizard is displayed.

Step 2 From the list of available managed systems, select the managed systems on which to load PATROL KMs. Then click Next.

BMC Software, Inc., Confidential and Proprietary Information

4-20 PATROL Central Operator – Web Edition Getting Started

Page 121: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Step 3 The list of available KMs is displayed.

Step 4 Select the PATROL KMs that you want to load. Then click Next.

A confirmation message is displayed.

Step 5 Click Finish to close the wizard.

Any PATROL KMs that were not already loaded on their respective managed systems are loaded. The PATROL KMs are displayed in the tree view area and added to your management profile.

BMC Software, Inc., Confidential and Proprietary Information

Monitoring and Managing Your Enterprise with PATROL Central Operator 4-21

Page 122: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Where to Go From Here

For information about... See...

monitoring with PATROL Central Operator

PATROL Central Operator – Web Edition online Help

using the PATROL Central console infrastructure

PATROL Central – Web Edition online Help

administering users PATROL Central Administration – Web Edition online Help

how PATROL works PATROL Fundamentals online Help

using both PATROL 3.x and PATROL Central Operator, or moving from a PATROL 3.x console

Chapter 5, “Using the PATROL 3.x and PATROL 7.x Consoles”

BMC Software, Inc., Confidential and Proprietary Information

4-22 PATROL Central Operator – Web Edition Getting Started

Page 123: 6010792 Patrol Central Operator Web Edition Geting Started 20899

5

Using the PATROL 3.x and PATROL 7.x Consoles 5

PATROL Central Operator is a console for the PATROL 7.x architecture. Consoles for the PATROL 3.x architecture include the PATROL Console for Windows and the PATROL Console for Unix. This chapter contains information for PATROL Central Operator users who are familiar with or will also use a PATROL 3.x console and discusses the following topics:

Compatibility and Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2PATROL Agent Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2KM Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2Developer Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Differences Between PATROL Console for Windows or PATROL Console for Unix and PATROL Central Operator . . . . . . . . . . . . . 5-3

Communications with Managed Systems . . . . . . . . . . . . . . . . . . 5-4Session and Desktop Files Versus Management Profiles . . . . . . 5-4Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5User Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5User Names and Passwords for Managed Systems . . . . . . . . . . 5-6Computer Name and Port Number Versus Managed

System Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6Event Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7Customizations Versus Overrides . . . . . . . . . . . . . . . . . . . . . . . . 5-7State Change Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7KM Version Arbitration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8Chart History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8Location of Task Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9KMs in the PATROL Object Namespace . . . . . . . . . . . . . . . . . . 5-9

BMC Software, Inc., Confidential and Proprietary Information

Using the PATROL 3.x and PATROL 7.x Consoles 5-1

Page 124: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Running Menu Commands and InfoBox Commands . . . . . . . . .5-10Migrating Console Information from PATROL Console for

Windows or PATROL Console for Unix . . . . . . . . . . . . . . . . . . . . .5-10

Compatibility and FunctionalityThis section describes important facts that you need to know before moving from PATROL Console for Windows or PATROL Console for Unix (PATROL 3.x architecture), to PATROL Central Operator.

TipYou can use both PATROL 3.x consoles and PATROL 7.x consoles in your PATROL environment.

PATROL Agent Compatibility

To use PATROL Central Operator, you must use the PATROL 7.x architecture, which requires PATROL Agent version 3.5 or later. PATROL Central Operator will not work with a PATROL Agent earlier than version 3.5.

KM Compatibility

A PATROL 7.x console is compatible with currently supported KMs. You can continue to use the same KMs that you used with a PATROL 3.x console. However, if a KM requires files (such as Help, icons or executables) on the PATROL Console Server or the console, features that use those files will not work until the files are installed in the appropriate locations. Local menu commands also are disabled in the Web Edition of PATROL Central Operator, unlike in Windows Edition.

BMC Software, Inc., Confidential and Proprietary Information

5-2 PATROL Central Operator – Web Edition Getting Started

Page 125: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Developer Functionality

The PATROL 7.x architecture currently has no console with KM developer functionality. In order to develop new KMs or change existing ones, you should continue using PATROL Console for Windows or PATROL Console for Unix.

Differences Between PATROL Console for Windows or PATROL Console for Unix and PATROL Central Operator

This section describes the primary differences between PATROL Console for Windows or PATROL Console for Unix (PATROL 3.x architecture) and PATROL Central Operator (PATROL 7.x architecture). Many of the differences come from differences between the PATROL 3.x and the PATROL 7.x architectures. For a description of the PATROL architecture, see the PATROL Fundamentals online Help.

Difference Page

Communications with Managed Systems 5-4

Session and Desktop Files Versus Management Profiles 5-4

Terminology 5-5

User Administration 5-5

User Names and Passwords for Managed Systems 5-6

Computer Name and Port Number Versus Managed System Name 5-6

Event Types 5-7

Customizations Versus Overrides 5-7

State Change Actions 5-7

KM Version Arbitration 5-8

Chart History 5-8

Location of Task Icons 5-9

BMC Software, Inc., Confidential and Proprietary Information

Using the PATROL 3.x and PATROL 7.x Consoles 5-3

Page 126: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Communications with Managed Systems

PATROL Console for Windows and PATROL Console for Unix communicate directly with managed systems. PATROL Central Operator uses an RTserver cloud and PATROL Console Server to communicate with managed systems.

Session and Desktop Files Versus Management Profiles

PATROL Console for Windows and PATROL Console for Unix store console information, such as which managed systems and KMs are loaded, in session and desktop files. These files are stored on the console computer and can be accessed from only that computer.

PATROL Central Operator stores console information in a management profile on the PATROL Console Server. A management profile can be accessed from any installation of PATROL Central Operator with access to that PATROL Console Server. Also, changes to your management profile are saved automatically as you make them.

You can use the Windows Edition of PATROL Central Operator to migrate a desktop file to a management profile. That management profile, in turn, can then be used with the Web Edition of PATROL Central Operator. For more information about migrating desktop files, see the PATROL Central – Operator- Microsoft Windows Edition Gettng Started.

KMs in the PATROL Object Namespace 5-9

Running Menu Commands and InfoBox Commands 5-10

Difference Page

BMC Software, Inc., Confidential and Proprietary Information

5-4 PATROL Central Operator – Web Edition Getting Started

Page 127: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Terminology

The following table lists terms that are different in PATROL 3.x and PATROL 7.x consoles.

User Administration

For PATROL Console for Windows and PATROL Console for Unix, a user’s access to functionality is controlled by the patrol.conf and ptrlroles.txt files and by the ptrldev and patroldev groups, as well as by the mode of the console (developer or operator).

For PATROL Central Operator, a user’s access to functionality is controlled by privileges and rights set for groups and users in PATROL Central Administration.

PATROL Console for Windows and PATROL Console for Unix Term

PATROL Central Operator Term Comments

agent, host managed system A managed system is a computer that is running the PATROL Agent software.

agent query managed system query This change corresponds to the change from agent to managed system.

alarm (state) critical (state) The alarm state in the PATROL 3.x architecture is the critical state in the PATROL 7.x architecture. However, the term alarm is still used when referring to undesirable situations without indicating a specific object state, as in alarm ranges, snoozing an alarm, or responding to an alarm.

BMC Software, Inc., Confidential and Proprietary Information

Using the PATROL 3.x and PATROL 7.x Consoles 5-5

Page 128: 6010792 Patrol Central Operator Web Edition Geting Started 20899

User Names and Passwords for Managed Systems

For PATROL Console for Windows and PATROL Console for Unix, user names and passwords for managed systems are stored on the console computer in the desktop and session files. After you enter the account information once, you do not have to enter it again when you open that desktop or session. However, if you use a different console, you must re-enter the account information.

For PATROL Central Operator, user names and passwords for managed systems are not stored in the management profile (the corresponding item for a desktop or session file). If you enter account information in PATROL Central Operator, it is not remembered the next time you open the management profile. However, an administrator can set up aliases and impersonations on the PATROL Console Server by using PATROL Central Administration. If the aliases and impersonations are set up correctly, you can open any management profile without being prompted for account information.

Computer Name and Port Number Versus Managed System Name

When specifying a managed system (computer) in PATROL Console for Windows and PATROL Console for Unix, you provide both a computer name and a port number separately.

When specifying a managed system in PATROL Central Operator, you provide the managed system name, which is a combination of the computer name and the port number that the PATROL Agent uses.

For example, if the computer name is starfish and the PATROL Agent is running on the default port of 3181, then the name of the managed system is starfish_3181. When adding a managed system to your management profile, you must specify the complete name of the managed system, including the computer name and the port number.

BMC Software, Inc., Confidential and Proprietary Information

5-6 PATROL Central Operator – Web Edition Getting Started

Page 129: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Event Types

The following table lists the event types in PATROL Console for Windows and PATROL Console for Unix and the equivalent event types in PATROL Central Operator.

Customizations Versus Overrides

In PATROL Console for Windows and PATROL Console for Unix, changes that you make to an object, such as changes to the alarm ranges of a parameter, are called overrides.

In PATROL Central Operator, these changes are called customizations.

For more information, see the PATROL Agent Reference Manual.

State Change Actions

A state change action is a set of commands that are executed on the console (or PATROL Console Server) computer when an object changes state.

In PATROL 3.x architecture, a state change action is stored as part of a KM and is executed on only the console computer. State change actions can be defined globally and locally at the managed system and application instance levels.

PATROL Console for Windows and PATROL Console for Unix Event Type

PATROL Central Operator Event Type

infostate changeerror

info

warning warning

alarm critical

BMC Software, Inc., Confidential and Proprietary Information

Using the PATROL 3.x and PATROL 7.x Consoles 5-7

Page 130: 6010792 Patrol Central Operator Web Edition Geting Started 20899

In PATROL 7.x architecture, state change actions are stored in the management profile. You must use the Windows Edition of PATROL Central Operator to define state change actions. When a management profile is open in the Web Edition of PATROL Central Operator, only state change actions that are defined to execute on the PATROL Console Server are executed. State change actions that are defined to execute on the console computer are ignored.

For more information about state change actions, see the PATROL Central Operator – Microsoft Windows Edition online Help.

KM Version Arbitration

In PATROL 3.x architecture, KMs are stored on both the managed system running the PATROL Agent and on the console computer. How the PATROL Agent and PATROL Console reconcile different versions of a single KM is called KM version arbitration. For specific information on KM version arbitration, see PATROL Console for Unix User Guide or PATROL Console for Microsoft Windows User Guide, Volume 1.

In PATROL 7.x architecture, KM related files that are installed on the console computer are not versioned. Therefore, PATROL Central Operator does not take part in KM version arbitration.

Chart History

In PATROL Console for Windows and PATROL Console for Unix, history is shown in a separate window from the main chart.

In PATROL Central Operator, history is shown in the same window as the chart. You do not have to open a separate window to view historical data. The title of the chart displays the current history range.

BMC Software, Inc., Confidential and Proprietary Information

5-8 PATROL Central Operator – Web Edition Getting Started

Page 131: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Location of Task Icons

In PATROL Console for Windows and PATROL Console for Unix, icons for tasks are shown at the same level of the hierarchy as the object from which the task was run.

In PATROL Central Operator, icons for tasks are all shown under the Tasks folder.

KMs in the PATROL Object Namespace

In PATROL 3.x architecture, the PATROL object namespace includes three levels: application class, application instance, and parameter.

In PATROL 7.x architecture, the PATROL object namespace now includes a level for the KM. This level is above the application class level in the hierarchy. For PATROL Agent version 3.5, the KM level is automatically created for each loaded application class. The name of the KM is the same as the name of the corresponding application class.

For example, in the runtime path of the Windows Operating System object, rt/NT_OS/NT_OS/NT_OS, the first NT_OS refers to the KM, the second NT_OS refers to the application class, and the third NT_OS refers to the application instance.

This KM level is displayed in InfoBoxes (the runtime path item) and Event Manager (the event origin attribute). It is used in managed system queries and event filters. However, it is not displayed in the navigation pane and is not supported in PSL statements. When referring to a PATROL object in PSL commands, you must continue to use its PATROL 3.x path without the KM level.

BMC Software, Inc., Confidential and Proprietary Information

Using the PATROL 3.x and PATROL 7.x Consoles 5-9

Page 132: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Running Menu Commands and InfoBox Commands

In PATROL 3.x architecture, menu commands and InfoBox commands are stored in the KM on the console computer. When the user selects a menu command or opens an InfoBox, the console prompts the user for the value of any console macros, and determines where the command should be run—on the console or on the PATROL Agent. Then the console either sends the command to the PATROL Agent for execution or executes the command itself. The PATROL Agent does not use the menu commands or InfoBox commands in its own copy of the KM.

In PATROL 7.x architecture, menu commands and InfoBox commands are still stored in the KM. However, since the KM no longer exists on the console, the menu commands and InfoBox commands in the PATROL Agent are used. Also, local menu commands are disabled in the Web Edition of PATROL Central Operator.

When the user selects a menu command or opens an InfoBox, the PATROL Agent tells the console to prompt the user for the value of any console macros and determines where the command should be run. Then the PATROL Agent executes the command.

Migrating Console Information from PATROL Console for Windows or PATROL Console for Unix

You can migrate console information from PATROL Console for Windows and PATROL Console for Unix to a management profile for PATROL Central Operator. You must use the Windows Edition of PATROL Central Operator to migrate console information. After you migrate the console information to a management profile, you can then use the management profile with the Web Edition of PATROL Central Operator. See the PATROL Central – Operator- Microsoft Windows Edition Gettng Started for more information about how to migrate console information.

BMC Software, Inc., Confidential and Proprietary Information

5-10 PATROL Central Operator – Web Edition Getting Started

Page 133: 6010792 Patrol Central Operator Web Edition Geting Started 20899

A

Troubleshooting PATROL Central Operator A

This appendix provides troubleshooting information on installing and configuring PATROL Central Operator.

For more troubleshooting information, see the PATROL Central Operator – Web Edition online Help, PATROL Console Server and RTserver Getting Started, and PATROL Installation Reference Manual.

This appendix discusses the following topics:

Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2The Web Server Will Not Start . . . . . . . . . . . . . . . . . . . . . . . . . A-3On Solaris, the Web Server Dies at Startup . . . . . . . . . . . . . . . A-3The PATROL Central Web Page Is Not Available . . . . . . . . . . A-4The RTserver or PATROL Console Server Is Not Responding A-5Users Cannot Log on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6Users Cannot Add a Managed System . . . . . . . . . . . . . . . . . . . A-8Users are Prompted to Log on to a Managed System . . . . . . . . A-9No Online Help Exists for a Specific KM . . . . . . . . . . . . . . . . A-9PATROL Central Does Not Prompt for Password in

Attended Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-10Users Are Told to Accept the Certificate, But Are Never

Allowed To Do So . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-10Gathering Troubleshooting Information . . . . . . . . . . . . . . . . . . . . . A-11

Installation Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-11Web Server Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-12Client Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-16

BMC Software, Inc., Confidential and Proprietary Information

Troubleshooting PATROL Central Operator A-1

Page 134: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Checking Which PATROL Central Ports Are In Use on Unix . A-17Obtaining Version, System and Contact Information . . . . . . . . A-18

Dealing with Web Server Issues . . . . . . . . . . . . . . . . . . . . . . . . . . . A-19

Common Problems

This section contains troubleshooting information for the following common problems.

Problem Type Page

The Web Server Will Not Start A-3

On Solaris, the Web Server Dies at Startup A-3

The PATROL Central Web Page Is Not Available A-4

The RTserver or PATROL Console Server Is Not Responding A-5

Users Cannot Log on A-6

Users Cannot Add a Managed System A-8

Users are Prompted to Log on to a Managed System A-9

No Online Help Exists for a Specific KM A-9

PATROL Central Does Not Prompt for Password in Attended Mode A-10

Users Are Told to Accept the Certificate, But Are Never Allowed To Do So

A-10

BMC Software, Inc., Confidential and Proprietary Information

A-2 PATROL Central Operator – Web Edition Getting Started

Page 135: 6010792 Patrol Central Operator Web Edition Geting Started 20899

The Web Server Will Not Start

Problem: Some of the required ports are not available. For example, if you have just stopped the Web server, it might not have released the ports yet.

Solution: Make sure that no processes are using the ports. See “Checking Which PATROL Central Ports Are In Use on Unix” on page A-17. If you just stopped the Web server, wait for it to release the ports.

Problem: The Tomcat servlet container or Tomcat Web server was terminated incorrectly or ran out of disk space, causing files in the WEB-INF directory to be set to zero length.

Solution: Copy the files from the $BMC_ROOT\webcentral\tomcat401\webapps\patrol\WEB-INF\backup directory to the $BMC_ROOT\webcentral\tomcat401\webapps\patrol\WEB-INF directory.

On Solaris, the Web Server Dies at Startup

Problem: The latest Solaris patches are not applied.

Solution: Apply the latest patches for Solaris. See “Solaris OS Patches” on page 2-11.

BMC Software, Inc., Confidential and Proprietary Information

Troubleshooting PATROL Central Operator A-3

Page 136: 6010792 Patrol Central Operator Web Edition Geting Started 20899

The PATROL Central Web Page Is Not Available

Problem: The Web server is not running.

Solution: Start the Web server (IIS, Apache, or Tomcat standalone). For IIS, you must also start the Tomcat servlet container separately. For more information see “Starting and Stopping the Web Server” on page 3-16.

Problem: The Web server is using a different port from the default.

Solution: Inform users to include the port number in the URL. For example, if the Web server myserver is using port 8080, view the URL http://myserver:8080.

Problem: On IIS, the security certificate is not properly installed or it has expired.

Solution: Install a valid security certificate. For more information, see “Certificate Information (IIS Only)” on page 2-18.

BMC Software, Inc., Confidential and Proprietary Information

A-4 PATROL Central Operator – Web Edition Getting Started

Page 137: 6010792 Patrol Central Operator Web Edition Geting Started 20899

The RTserver or PATROL Console Server Is Not Responding

Problem: The RTserver or PATROL Console Server is not running.

Solution: Make sure that the RTserver and PATROL Console Server are running. For more information, see the PATROL Console Server and RTserver Getting Started. If you must start the RTserver, wait for PATROL Central to recognize that the RTserver has been started.

Problem: PATROL Central might not be using the correct RTserver or PATROL Console Server.

Solution: Make sure that PATROL Central is using the correct RTserver and PATROL Console Server and that their names are type correctly. Note that the name of the PATROL Console Server might not match the host name. For more information, see the AppendixC, “Modifying Initialization Settings After Installation.”

Problem: PATROL Central might be using a different RTserver from the PATROL Console Server.

Solution: Make sure that PATROL Central and PATROL Console Server are using the same RTserver. For more information, see AppendixC, “Modifying Initialization Settings After Installation” and PATROL Console Server and RTserver Getting Started.

BMC Software, Inc., Confidential and Proprietary Information

Troubleshooting PATROL Central Operator A-5

Page 138: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Problem: The PATROL Console Server might not be available on the network.

Solution: To determine if the PATROL Console Server computer is available on the network, ping the host name of the computer. Note that the name of the PATROL Console Server is its host name by default; however, a different name can be specified when starting the PATROL Console Server. Also ensure that the RTserver computer and the PATROL Console Server computer can both reach each other on the network.

Problem: The RTserver might not be available on the network.

Solution: To determine if the RTserver is available on the network, telnet to the RTserver on the appropriate port. Also ensure that the RTserver computer and the Web server computer can both reach each other on the network.

Users Cannot Log on

Problem: HTTPS is not active.

Solution: Make sure that HTTPS is active by trying to access https://hostname:port, where hostname is the name of the server, and port is its HTTPS port. If you are using IIS, make sure that PATROL Central is using the correct HTTPS port for IIS. For more information about setting the HTTPS port, see the AppendixC, “Modifying Initialization Settings After Installation.”

BMC Software, Inc., Confidential and Proprietary Information

A-6 PATROL Central Operator – Web Edition Getting Started

Page 139: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Problem: The user did not accept the certificate for the Web server.

Solution: Inform the user to restart the Web browser and accept the certificate when accessing the PATROL Central Web site.

Problem: The PATROL Console Server is too busy processing requests from other computers to process your log on request. (You get the “Failed to log on to Console Server. Operation Timed Out” error message.)

Solution: Inform users to try to log on again.

Problem: The user might be using an incorrect user name or password.

Solution: Inform the user to use a user name and password for an operating system account on the PATROL Console Server.

Problem: The user might not have the necessary privileges.

Solution: Grant the necessary privileges to the user by placing the user account in the appropriate group on the PATROL Console Server.

BMC Software, Inc., Confidential and Proprietary Information

Troubleshooting PATROL Central Operator A-7

Page 140: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Users Cannot Add a Managed System

Problem: The PATROL Agent software on the managed system might not be running, or it might not be using the correct RTserver.

Solution: Make sure the PATROL Agent software is running on the managed system and using the correct host name and port number for the RTserver. For more information, see the PATROL Agent Reference Manual and PATROL Console Server and RTserver Getting Started.

Problem: The PATROL Agent software on the managed system might be a version previous to version 3.5.

Solution: Make sure the PATROL Agent software is at least version 3.5. For more information, see the PATROL Agent Reference Manual.

Problem: The management profile might be read-only.

Solution: Inform the user to use a management profile that is not read-only.

Problem: The user might not have the necessary privileges.

Solution: Grant the necessary privileges to the user by placing the user account in the appropriate group on the PATROL Console Server.

BMC Software, Inc., Confidential and Proprietary Information

A-8 PATROL Central Operator – Web Edition Getting Started

Page 141: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Users are Prompted to Log on to a Managed System

Problem: The managed system does not recognize the user as a valid user.

Solution: Set up the impersonation table for the user in PATROL Central Administration. The user can also log on to the managed system with an account on that system.

No Online Help Exists for a Specific KM

Problem: The online Help for that KM is not installed with PATROL Central Operator.

Solution: Make sure you install the appropriate online Help with the PATROL Central Operator whenever you install a new KM on a managed system.

Problem: There is no online Help for that KM.

Solution: No action required.

BMC Software, Inc., Confidential and Proprietary Information

Troubleshooting PATROL Central Operator A-9

Page 142: 6010792 Patrol Central Operator Web Edition Geting Started 20899

PATROL Central Does Not Prompt for Password in Attended Mode

Problem: On Unix, at security level 4, attended mode, PATROL Central does not prompt for the keystore location or password when it is started. The startup script uses ’su -’ to pass the Tomcat user’s environment to the Tomcat process. This includes the X11 variables necessary to display a dialog box.

Solution: Set your default shell, as specified in etc/passwd, to /bin/sh. If you use a different shell, such as ksh or bash, the environment is not passed so X11 is not available to the Tomcat process.

Users Are Told to Accept the Certificate, But Are Never Allowed To Do So

Problem: On Netscape, after a user permanently accepted the certificate for the Web site in a previous session, you re-installed the certificate on the Web server or installed a new certificate.

Solution: Inform the user to delete the certificate from the browser, then reconnect to the PATROL Central Web site.

BMC Software, Inc., Confidential and Proprietary Information

A-10 PATROL Central Operator – Web Edition Getting Started

Page 143: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Gathering Troubleshooting Information

This section contains information on locating installation logs and Web server logs.

Installation Logs

One log file is created each time the installer is run. The name of the log file is a combination of the computer name and a time stamp. The location of the file depends on the operating system.

• On Windows 2000, the log file is saved to the Document and Settings\username\Application Data\BMCINSTALL\ directory.

• On Windows NT, the log file is saved to the Winnt\Profiles\username\Application Data\BMCINSTALL\ directory.

• On Unix, the log file is saved to the home_directory/BMCINSTALL/ directory.

For example, the log file for user auser on a Windows NT computer ACOMPUTER could be C:\WINNT\Profiles\auser\Application Data\BMCinstall\ACOMPUTER_1-1005340189.log.

BMC Software, Inc., Confidential and Proprietary Information

Troubleshooting PATROL Central Operator A-11

Page 144: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Web Server Logs

Which Web server logs you have depends on the Web server. All Web servers will have Tomcat servlet container logs.

NoteThis section refers to the webcentral sub-directory of $BMC_ROOT. By default, this directory is WebCentral on Windows, and webcentral on Unix. However, a different name for this directory could have been specified in the installation. For more information see, “PATROL Central Sub-directory” on page 2-22.

IIS Web Server Logs

The IIS Web server maintains log files and also places messages in the Windows Event log.

The logs for IIS are located in the system_dir\LogFiles\w3svcl\ directory. These logs are most useful for monitoring HTTP requests.

Apache Web Server Logs

The Apache Web server maintains the log files in the $bmc root/common/apache/apache.1.3.26/OS/logs/ directory. The error_log file contains information about port conflicts and startup problems.

The Apache Web server log files can grow considerably over the course of time. For example, each image load request is logged.

The installation installs a utility to truncate the log files for the Apache Web server while the Web server is running, so that they do not grow without limit.

The utility consists of the following files:

• the /etc/patrol.d/apache/bmctrimlog executable utility• the /etc/patrol.d/apache/bmctrimlog.conf text configuration file

BMC Software, Inc., Confidential and Proprietary Information

A-12 PATROL Central Operator – Web Edition Getting Started

Page 145: 6010792 Patrol Central Operator Web Edition Geting Started 20899

This utility can be run periodically as a job in the root crontab. If you chose to automatically add the job to the root crontab in the installation, the following line is added, which runs the utility every hour on the half-hour.

30 * * * * /etc/patrol.d/apache/bmctrimlog

If you chose to not add the job to the root crontab, you can add the job manually and adjust the job schedule. For more information about cron and crontab, see the man pages for them for your system.

To fine-tune the log file management edit the bmctrimlog.conf file. For example, you can set different maximum sizes for each log file. See the comments in the configuration file for more information.

BMC Software, Inc., Confidential and Proprietary Information

Troubleshooting PATROL Central Operator A-13

Page 146: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Tomcat Web Server and Servlet Container Logs

The following logs in the $BMC_ROOT/webcentral/tomcat401/logs directory reflect the state of the Tomcat servlet container and its integration with the Web server.

Web Server File Description

all localhost_log.year-month-date.txta

a The level of verbosity in these logs is controlled by settings in the $BMC_ROOT/webcentral/tomcat401/conf/server.xml file

standard output log file for Tomcat Web server

all localhost_examples_log.year-month-date.txta

example Web applications log file

all localhost_access_log.year-month-date.txta

access log file for Tomcat Web server

IIS isapi.log This file contains messages created by the Apache Jakarta Protocol 13 (AJP13) ISAPI filter.

Apache mod_jk.log This file contains messages created by the Apache Jakarta Protocol 13 (AJP13) Apache module.

Apache and Tomcat standalone (Unix)

jvm.stdout This file contains the standard output of the Tomcat java process. It is usually the most useful log to look at initially.

IIS and Tomcat Standalone (Windows)

stdout.log This file contains the Tomcat java process standard output messages when Tomcat is run as a service.If Tomcat is run from a command window, all output is sent to that window.

IIS and Tomcat Standalone (Windows)

stderr.log This file contains the Tomcat java process standard error output messages when Tomcat is run as a service.If Tomcat is run from a command window, all output is sent to that window.

BMC Software, Inc., Confidential and Proprietary Information

A-14 PATROL Central Operator – Web Edition Getting Started

Page 147: 6010792 Patrol Central Operator Web Edition Geting Started 20899

The following logs in the $BMC_ROOT/webcentral/tomcat401/webapps/patrol/WEB-INF/log/ directory contain information for the Tomcat servlet container.

On Windows, if you run the Tomcat Web server as a service, it also places messages into the Windows Event log.

File Description

jcosjni.loga

a The level of verbosity in these logs is controlled by the $BMC_ROOT/webcentral/tomcat401/webapps/patrol/WEB-INF/globalDebug.cfg file.

log file for jcosjni

pwc1.loga

pwc2.logpwc3.logpwc4.logpwc5.log

These files are error log files for PATROL Central. The log pwc1.log is always the most recent.

BMC Software, Inc., Confidential and Proprietary Information

Troubleshooting PATROL Central Operator A-15

Page 148: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Client Logs

The location of client logs depends on the platform of the client.

Windows Client Logs

On Windows, the Java Plugin also has its own error messages and trace file.

To view error messages related to the Java Plugin, double-click the java console icon in the system tray.

The location of the Java Plugin trace file depends on the operating system.

• On Windows 2000, the Java Plugin trace file is saved to the Document and Settings\username\plugin131_04.trace file.

• On Windows NT, the Java Plugin log file is saved to the Winnt\Profiles\username\plugin131_04.trace file.

Unix Client Logs

On Unix, the Java Plugin trace log contains trace output from the plugin. It is contained in the home directory of the user. The typical file name is plugin131_04.trace.

BMC Software, Inc., Confidential and Proprietary Information

A-16 PATROL Central Operator – Web Edition Getting Started

Page 149: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Checking Which PATROL Central Ports Are In Use on Unix

Summary: This task describes how to check whether the ports used by the PATROL Central Web server are in use on Unix.

To Check Which Ports are In Use on Unix

Step 1 Change to the root user.

Step 2 In a command window, change to the $BMC_ROOT/webcentral/bin directory.

Step 3 Enter the following command:

./pwcctl status

BMC Software, Inc., Confidential and Proprietary Information

Troubleshooting PATROL Central Operator A-17

Page 150: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Obtaining Version, System and Contact Information

Summary: This task describes how to obtain version, system, and contact information for PATROL Central.

To Obtain Version, System and Contact Information

Step 1 Start your Web browser and log on to PATROL Central.

Step 2 In the navigation area, click the Home tab, then the About sub-tab.

Step 3 Click one of the following links in the list area:

• Version Information• System Information• Contact Information

BMC Software, Inc., Confidential and Proprietary Information

A-18 PATROL Central Operator – Web Edition Getting Started

Page 151: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Dealing with Web Server Issues

For assistance with Web server issues, see the documentation for your Web server.

NoteThe documentation for the Web server and the documentation for PATROL Central differ in some areas. For example, in how you start the Web server. In these cases, follow the documentation for PATROL Central.

Web Server Documentation

IIS See the IIS documentation.

Apache See the following:• the Apache documentation installed with Apache at

http://hostname:port/manual, where hostname is the name of the server, and port is its HTTP port.

• the Apache HTTP Server Web site at http://httpd.apache.org.

Tomcat standalone See the following• the Tomcat documentation installed with Tomcat at

http://hostname:port/tomcat-docs, where hostname is the name of the server, and port is its HTTP port.

• the Jakarta Project Web site at http://jakarta.apache.org/tomcat.

BMC Software, Inc., Confidential and Proprietary Information

Troubleshooting PATROL Central Operator A-19

Page 152: 6010792 Patrol Central Operator Web Edition Geting Started 20899
BMC Software, Inc., Confidential and Proprietary Information

A-20 PATROL Central Operator – Web Edition Getting Started

Page 153: 6010792 Patrol Central Operator Web Edition Geting Started 20899

B

Enhancing Web Server Security B

Historically, Web servers have been vulnerable to back-door attacks. Unusual URLs, combined with weaknesses in the handling of them, may allow unauthorized users to execute commands on behalf of the Web server account.

This section discusses optional tasks that you can do to minimize potential damage.

About Limiting the Web Server Account . . . . . . . . . . . . . . . . . . . . .B-2About Locking Down Files and Directories . . . . . . . . . . . . . . . . . . .B-2

How Locking Down Files and Directories Works . . . . . . . . . . .B-2When to Lock and Unlock Files and Directories . . . . . . . . . . . .B-3Locking and Unlocking Files and Directories . . . . . . . . . . . . . .B-4

About the Keystore Password and Self-signed Certificate for the Apache Web Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6

About the Keystore Password and the Apache Policy File . . . . .B-6Replacing the Self-signed Certificate . . . . . . . . . . . . . . . . . . . . .B-7About Attended and Unattended Modes for the Apache

Web Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-7

BMC Software, Inc., Confidential and Proprietary Information

Enhancing Web Server Security B-1

Page 154: 6010792 Patrol Central Operator Web Edition Geting Started 20899

About Limiting the Web Server Account

When you create the Web server account, you should limit its capabilities to the minimum that it needs.

For more information, see “Web Server User Name and Group (Apache and Tomcat Only)” on page 2-17.

About Locking Down Files and Directories

The Web server account should have access to only the files and directories required to satisfy legitimate requests for Web content and to write to log files.

How Locking Down Files and Directories Works

The scripts for locking down files and directories perform slightly differently tasks on Unix and Windows.

On Unix, after you install PATROL Central, all of the files under the $BMC_ROOT/webcentral directory in are owned by the Web server account, which is used to install PATROL Central. The procedures for locking down files and directories change ownership of those files to a secure account (root) and change permissions so that the Web server account can only read most files, and can write to only its log files and datastore files.

On Windows, after you install PATROL Central, all of the files under the %BMC_ROOT%/WebCentral directory can be accessed by any user. The procedure for locking down files and directories changes permissions so that the Web server account can only read most files, and can write to only its log files and datastore files. If you are using the IIS Web server, the procedure also provides the IIS anonymous user account with limited access.

BMC Software, Inc., Confidential and Proprietary Information

B-2 PATROL Central Operator – Web Edition Getting Started

Page 155: 6010792 Patrol Central Operator Web Edition Geting Started 20899

When to Lock and Unlock Files and Directories

You can lock down files and directories any time after you install PATROL Central when the Web server and Tomcat servlet container are not running.

If you lock down the file system, you must unlock it prior to installing, re-installing, or uninstalling any components, such as additional console modules. You can then lock down the file system again after performing the install, re-install, or uninstall.

BMC Software, Inc., Confidential and Proprietary Information

Enhancing Web Server Security B-3

Page 156: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Locking and Unlocking Files and Directories

Summary: This task describes how to lock down the files and directories from the Web server account.

Before You Begin

The Web server and Tomcat servlet container are not running. For Apache, and Tomcat standalone, stopping the Web server also stops the Tomcat servlet container.

NoteThese procedures refer to the webcentral sub-directory of $BMC_ROOT. By default, this directory is WebCentral on Windows, and webcentral on Unix. However, a different name for this directory could have been specified in the installation. For more information see, “PATROL Central Sub-directory” on page 2-22.

Locking and Unlocking Files and Directories for Apache on Unix

Step 1 Change to the root account.

Step 2 Change to the $BMC_ROOT/common/apache/apache1.3.26/platform/bmcinst directory.

Step 3 Enter the appropriate command:

• ./lock.sh root web_server_account $BMC_ROOT/common/apache/apache1.3.26

• ./unlock.sh web_server_account $BMC_ROOT/common/apache/apache1.3.26

Step 4 Continue with the instructions for locking and unlocking files and directories for Tomcat on Unix to lock or unlock the files and directories for the Tomcat servlet container.

BMC Software, Inc., Confidential and Proprietary Information

B-4 PATROL Central Operator – Web Edition Getting Started

Page 157: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Locking and Unlocking Files and Directories for Tomcat on Unix

Step 1 Change to the root account.

Step 2 Change to the $BMC_ROOT/webcentral/install directory.

Step 3 Enter the appropriate command:

• ./lock.sh root web_server_account $BMC_ROOT/webcentral

• ./unlock.sh web_server_account $BMC_ROOT/webcentral

Locking and Unlocking Files and Directories on Windows (IIS and Tomcat Standalone)

Step 1 Log on using an administrator account.

Step 2 In a command window, change to the %BMC_ROOT%/WebCentral/install directory.

Step 3 Enter the appropriate command:

• lock.bat “%BMC_ROOT%/WebCentral” IIS_anonymous_user_account Tomcat_startup_account

If you are using IIS, IIS_anonymous_user_account is typically IUSER_machine_name. If you are using Tomcat standalone Web server, this is the same as the Tomcat_startup_account.

Tomcat_startup_account is the account used to manually start the Tomcat Web server or Tomcat servlet container. If you are running Tomcat as a service, instead of manually, you can omit this account.

• unlock.bat “%BMC_ROOT%/WebCentral” install_account

NoteThis procedure does not lock down IIS specific files. See the documentation for IIS for more information about locking down those files.

BMC Software, Inc., Confidential and Proprietary Information

Enhancing Web Server Security B-5

Page 158: 6010792 Patrol Central Operator Web Edition Geting Started 20899

About the Keystore Password and Self-signed Certificate for the Apache Web Server

This section discusses how the keystore password is saved and the implications of this implementation.

About the Keystore Password and the Apache Policy File

Apache needs the password for the keystore when it starts up so that it can access its keystore containing its private key. This private key is used together with the corresponding certificate to perform encrypted communications.

You specify the keystore password in the installation. By default, this password is stored encrypted in the /etc/patrol.d/security_policy/Apache.plc policy file. Apache is configured to automatically retrieve the password from this policy file.

NoteApache operates outside the PATROL Security context. The Apache.plc policy file is used only to store and retrieve the keystore password. Other information stored in the file is not used. For more information about policy files, see the PATROL Security User Guide.

If you obtain a new certificate from a certificate authority, you might also have to generate a new private key and keystore. If the new keystore is protected by a different password from the one specified in the installation, you must also update the Apache policy file.

BMC Software, Inc., Confidential and Proprietary Information

B-6 PATROL Central Operator – Web Edition Getting Started

Page 159: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Replacing the Self-signed Certificate

Summary: This task describes how to replace the self-signed certificate created at installation with a certificate from a certificate authority.

Step 1 Obtain the certificate from a certificate authority.

Step 2 Installing the new certificate.

See your certificate authority for detailed instructions.

Step 3 If the certificate uses a private key with a different password from the previous keystore password, use the plc_password utility to update the password for the Apache.plc policy file to the new password.

NoteThe plc_password utility is documented in the PATROL Security User Guide.

Step 4 Restart the Apache Web server.

About Attended and Unattended Modes for the Apache Web Server

By default, Apache runs in unattended mode. It automatically retrieves the keystore password from the Apache policy file. However you can configure it for attended mode. In attended mode, an administrator must manually enter to the keystore password when starting Apache, and the Apache policy file is no longer used.

The keystore password for starting Apache is specified in the installation. It is not the default password specified in the PATROL Security User Guide.

BMC Software, Inc., Confidential and Proprietary Information

Enhancing Web Server Security B-7

Page 160: 6010792 Patrol Central Operator Web Edition Geting Started 20899

To convert Apache to attended mode, use the SSLPassPhraseDialog directive in the httpd.conf file. For more information, see the SSL documentation included with the Apache documentation at http://hostname:port/manual/mod/mod_ssl, where hostname is the name of the server, and port is its HTTP port.

Do not use the plc_password utility that is documented in the PATROL Security User Guide to switch Apache to unattended or attended mode. That method does not apply to starting the Apache Web server.

BMC Software, Inc., Confidential and Proprietary Information

B-8 PATROL Central Operator – Web Edition Getting Started

Page 161: 6010792 Patrol Central Operator Web Edition Geting Started 20899

C

Modifying Initialization Settings After Installation C

You configure initialization settings during the installation of PATROL Central Operator. However, you can change some of those settings after installation by editing the startup configuration file.

This appendix discusses the following topics:

Location of the Startup Configuration File . . . . . . . . . . . . . . . . . . . .C-2About Modifying the Startup Configuration File . . . . . . . . . . . . . . .C-2What You May Modify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-3

BMC Software, Inc., Confidential and Proprietary Information

Modifying Initialization Settings After Installation C-1

Page 162: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Location of the Startup Configuration File

The startup configuration file, startup.cfg, resides in $BMC_ROOT/webcentral/tomcat401/webapps/patrol/WEB-INF.

NoteThis path refers to the webcentral sub-directory of $BMC_ROOT. By default, this directory is WebCentral on Windows, and webcentral on Unix. However, a different name for this directory could have been specified in the installation. For more information see, “PATROL Central Sub-directory” on page 2-22.

About Modifying the Startup Configuration File

The startup configuration file is a flat text file. When you modify the file, observe the following rules:

• Place each assignment statement alone on a single line.

• Each assignment statement must be of the format token = value with no commas, semi-colons, or other special characters

• Precede any comments with a # in the first position of the line.

NoteYou must restart the Tomcat servlet container for any changes to the startup configuration file to take effect. For the Apache and Tomcat standalone servers, this also involves restarting the Web server.

BMC Software, Inc., Confidential and Proprietary Information

C-2 PATROL Central Operator – Web Edition Getting Started

Page 163: 6010792 Patrol Central Operator Web Edition Geting Started 20899

What You May Modify

The following table lists the entries in the in the startup configuration file that you may modify.

TipIf you used the installation worksheets (See “Installation Worksheets” on page 2-25), record any changes to these entries on the worksheets.

WarningDo not modify any other settings in the startup configuration file. They are for use by BMC Software technical support only.

Entry Description

RTServer This entry specifies the RTserver to use. For more information, see “RTserver” on page 2-21.

securityService This entry specifies the PATROL Console Server that is used as a security server for PATROL Central. For more information, see “PATROL Console Server” on page 2-16.

httpsPort This entry specifies the HTTPS port for the Web server. For more information, see “Web Server HTTP and HTTPS Ports (Apache and Tomcat Only)” on page 2-24 or “IIS HTTPS Ports (IIS Only)” on page 2-23.

BMC Software, Inc., Confidential and Proprietary Information

Modifying Initialization Settings After Installation C-3

Page 164: 6010792 Patrol Central Operator Web Edition Geting Started 20899
BMC Software, Inc., Confidential and Proprietary Information

C-4 PATROL Central Operator – Web Edition Getting Started

Page 165: 6010792 Patrol Central Operator Web Edition Geting Started 20899

D

Environment Variables D

This appendix lists the environment variables used by PATROL Central Operator. The values of these variables are assigned at installation.

Environment Variable How Variable Is Used

BMC_ROOT points to the location where BMC Software products are installed

PATROL_ROOT points to the location where PATROL 7.x components, including PATROL Central Operator, are installed

BMC Software, Inc., Confidential and Proprietary Information

Environment Variables D-1

Page 166: 6010792 Patrol Central Operator Web Edition Geting Started 20899
BMC Software, Inc., Confidential and Proprietary Information

D-2 PATROL Central Operator – Web Edition Getting Started

Page 167: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Index

Index

Aagent query 5-5AJP v13 port 2-23alarm ranges 5-7alarm state, vs. critical state 5-5aliases 3-4Apache Web server

considerations 2-4execution of 3-18installation worksheet 2-28logs A-12user name and group 2-17

Ccertificate

about 2-6accepting or installing in Web browser

4-5considerations for Apache Web server

2-4considerations for IIS Web server 2-3considerations for Tomcat standalone

Web server 2-5obtaining for IIS Web server 2-18

BMC Software, Inc., Confidential and Proprietary Information

specifying info for Apache Web server 2-20

specifying info for Tomcat standalone Web servers 2-20

chart history 5-8compatibility

KMs and PATROL Central Operator 5-2

PATROL Agent 5-2console information, migrating 5-10console infrastructure 1-3console migration 5-10console module 1-3consoles 5-1critical state vs. alarm state 5-5custom installation 2-14custom views 1-3customizations, vs. overrides 5-7

Ddeveloper functionality 5-3diagram, PATROL architecture 1-5directory structure 2-59documentation

manuals, availability 1-8related 1-6

Index 1

Page 168: 6010792 Patrol Central Operator Web Edition Geting Started 20899

release notes, availability 1-8

Eenvironment variables

%BMC_ROOT% D-1%PATROL_ROOT% D-1

Ffeatures of PATROL Central Operator 1-2firewalls 2-7

Ggroups

Apache Web server group 2-17general guidelines for PATROL

Console Server 3-5PATROL Console Server and managed

systems 3-2setting up on for PATROL Console

Server 3-2Tomcat standalone Web server group

2-17

HHelp

accessing 1-7installing for KMs 2-22

HTTP portspecifying for Apache Web server 2-24specifying for Tomcat standalone Web

server 2-24HTTPS port

changing C-3

specifying for Apache Web server 2-24specifying for IIS Web server 2-23specifying for Tomcat standalone Web

server 2-24

IIIS Web server

considerations 2-3installation worksheet 2-27logs A-12Web site instance 2-24

impersonation 3-4InfoBox commands 5-10installation 2-1

about custom path 2-14about typical path 2-14components 2-9directory 2-15logs A-11procedure for Unix 2-43procedure for Windows 2-30required information for custom path

2-22required information for typical path

2-15worksheets 2-25

JJava Plugin 4-3

KKMs

console compatibility 5-2Help files 2-22loading 4-19

BMC Software, Inc., Confidential and Proprietary Information

2 PATROL Central Operator – Web Edition Getting Started

Page 169: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Llocking down files and directories

about B-2procedure B-4

Mmanaged system query 5-5managed systems

adding 4-16aliases and impersonation 3-4architecture 1-4name 5-6term 5-5user accounts 3-4

management profilesabout 4-11selecting 4-12vs. desktop files 5-4

manuals, availability 1-8menu commands 5-10monitoring with PATROL Central Operator

4-1

Ooverrides vs. customizations 5-7

Ppatadm group 3-2patop group 3-2patpop group 3-2PATROL 7.x environment 2-2PATROL Agent

execution on Windows 3-11managed system vs. 5-5

starting on Unix 3-11stopping on Unix 3-12verifying execution on Unix 3-12

PATROL architecture, diagram of 1-5PATROL Central

accessing 4-6interface 4-7main window 4-8PATROL Central Operator vs. 1-3

PATROL Central Administrationabout 3-7starting 3-8when to use 3-7

PATROL Central Operatoraccessing 4-9architecture diagram 1-5configuring environment for 3-1features 1-2installing 2-1management profile 4-11monitoring with 4-1PATROL and 1-4PATROL Central vs. 1-3system requirements 2-10troubleshooting A-1

PATROL Central sub-directory 2-22PATROL Console Server

about 2-16architecture 1-4changing PATROL Central security

server C-3connecting to 4-12execution on Windows 3-13impersonation table 3-4PATROL Central security server 2-16starting on Unix 3-13stopping on Unix 3-14user accounts and groups 3-2verifying execution on Unix 3-13

PATROL security information 2-22

BMC Software, Inc., Confidential and Proprietary Information

Index 3

Page 170: 6010792 Patrol Central Operator Web Edition Geting Started 20899

patscadm group 3-2patwatch group 3-2ports

AJP v13 2-23checking use of A-17HTTP and HTTPS (Apache and Tomcat

standalone Web servers) 2-24HTTPS (IIS Web server) 2-23managed systems 5-6Tomcat shutdown 2-23

privileges and rights 3-2problems, common A-2

Rrelease notes, availability 1-8RTserver

architecture 1-4changing C-3execution on Windows 3-9specifying 2-21starting on Unix 3-9stopping on Unix 3-10verifying execution on Unix 3-9

Ssecurity

enhancing for Web server B-1Web server B-1

startup configuration file C-2startup.cfg C-2state change actions 5-7system requirements 2-10

Tterminology 5-5

test URLs 3-20Tomcat servlet container

execution on Windows 3-17logs A-14

Tomcat shutdown port 2-23Tomcat standalone Web server

considerations 2-5installation worksheet 2-29logs A-14Web server user name and group 2-17

Tomcat Web serverexecution of 3-19

troubleshooting A-1typical installation 2-14

UURLs

test 3-20user accounts

Apache Web server account 2-17general guidelines for PATROL

Console Server and managed systems 3-5

setting up on for PATROL Console Server and managed systems 3-2

Tomcat standalone Web server account 2-17

WWeb browser

logs A-16requirements 4-2

Web serverApache 2-4choices 2-3IIS 2-3log files A-12

BMC Software, Inc., Confidential and Proprietary Information

4 PATROL Central Operator – Web Edition Getting Started

Page 171: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Tomcat standalone 2-5verifying execution of 3-20

Web server securityenhancing B-1

Web server user name and group 2-17webcentral directory 2-22worksheets

Apache Web server 2-28general 2-26IIS Web server 2-27installation 2-25Tomcat standalone Web server 2-29

BMC Software, Inc., Confidential and Proprietary Information

Index 5

Page 172: 6010792 Patrol Central Operator Web Edition Geting Started 20899
BMC Software, Inc., Confidential and Proprietary Information

6 PATROL Central Operator – Web Edition Getting Started

Page 173: 6010792 Patrol Central Operator Web Edition Geting Started 20899

END USER LICENSE AGREEMENTNOTICE

BY OPENING THE PACKAGE, INSTALLING, PRESSING "AGREE" OR "YES" OR USING THE PRODUCT, THE ENTITY ORINDIVIDUAL ENTERING INTO THIS AGREEMENT AGREES TO BE BOUND BY THE FOLLOWING TERMS. IF YOU DO NOTAGREE WITH ANY OF THESE TERMS, DO NOT INSTALL OR USE THE PRODUCT, PROMPTLY RETURN THE PRODUCT TOBMC OR YOUR BMC RESELLER, AND IF YOU ACQUIRED THE LICENSE WITHIN 30 DAYS OF THE DATE OF YOUR ORDERCONTACT BMC OR YOUR BMC RESELLER FOR A REFUND OF LICENSE FEES PAID. IF YOU REJECT THIS AGREEMENT,YOU WILL NOT ACQUIRE ANY LICENSE TO USE THE PRODUCT.

This Agreement ("Agreement") is between the entity or individual entering into this Agreement ("You") and BMC Software Distribution,Inc., a Delaware corporation located at 2101 CityWest Blvd., Houston, Texas, 77042, USA or its affiliated local licensing entity ("BMC")."You" includes you and your Affiliates. "Affiliate" is defined as an entity which controls, is controlled by or shares common control witha party. THIS AGREEMENT WILL APPLY TO THE PRODUCT, UNLESS (1) YOU AGREED TO A WEB BASED LICENSEAGREEMENT WITH BMC WHEN ORDERING THE PRODUCT, IN WHICH CASE THAT WEB BASED LICENSE AGREEMENTGOVERNS THE USE OF THE PRODUCT, OR (2) IF YOU DID NOT AGREE TO A WEB BASED LICENSE AGREEMENT WITH BMCWHEN ORDERING THE PRODUCT AND YOU HAVE A WRITTEN LICENSE AGREEMENT WITH BMC, THEN THAT WRITTENAGREEMENT GOVERNS THE USE OF THE PRODUCT. THE ELECTRONIC AGREEMENT PROVIDED WITH THE PRODUCT ASPART OF THE INSTALLATION OF THE PRODUCT WILL NOT APPLY. In addition to the restrictions imposed under this Agreement,any other usage restrictions contained in the Product installation instructions or release notes shall apply to Your use of the Product.

PRODUCT AND CAPACITY. "Software" means the object code version of the computer programs provided, via delivery or electronictransmission, to You. Software includes computer files, enhancements, maintenance modifications, upgrades, updates, bug fixes, anderror corrections.

"Documentation" means all written or graphical material provided by BMC in any medium, including any technical specifications,relating to the functionality or operation of the Software.

"Product" means the Software and Documentation.

"License Capacity" means the licensed capacity for the Software with the pricing and other license defining terms, including capacityrestrictions, such as tier limit, total allowed users, gigabyte limit, quantity of Software, and/or other capacity limitations regarding theSoftware. For licenses based on the power of a computer, You agree to use BMC’s current computer classification scheme, which isavailable at http://www.bmc.com or can be provided to You upon request.

ACCEPTANCE. The Product is deemed accepted by You, on the date that You received the Product from BMC.

LICENSE. Subject to the terms of this Agreement, as well as Your payment of applicable fees, BMC grants You a non-exclusive,non-transferable, perpetual (unless a term license is provided on an order) license for each copy of the Software, up to the LicenseCapacity, to do the following:

(a) install the Software on Your owned or leased hardware located at a facility owned or controlled by You in the country where Youacquired the license;

(b) operate the Software solely for processing Your own data in Your business operations; and

(c) make one copy of the Software for backup and archival purposes only (collectively a "License").

If the Software is designed by BMC to permit you to modify such Software, then you agree to only use such modifications or newsoftware programs for Your internal purposes or otherwise consistent with the License. BMC grants You a license to use theDocumentation solely for Your internal use in Your operations.

LICENSE UPGRADES. You may expand the scope of the License Capacity only pursuant to a separate agreement with BMC for suchexpanded usage and Your payment of applicable fees. There is no additional warranty period or free support period for licenseupgrades.

RESTRICTIONS: You agree to NOT: (a) disassemble, reverse engineer, decompile or otherwise attempt to derive any Software from executable code;

(b) distribute or provide the Software to any third party (including without limitation, use in a service bureau, outsourcing environment,or processing the data of third parties, or for rental, lease, or sublicense); or

(c) provide a third party with the results of any functional evaluation or benchmarking or performance tests, without BMC’s prior writtenapproval, unless prohibited by local law.

Page 174: 6010792 Patrol Central Operator Web Edition Geting Started 20899

TRIAL LICENSE. If, as part of the ordering process, the Product is provided on a trial basis, then these terms apply: (i) this licenseconsists solely of a non-exclusive, non-transferable evaluation license to operate the Software for the period of time specified fromBMC or, if not specified, a 30 day time period ("Trial Period") only for evaluating whether You desire to acquire a capacity-basedlicense to the Product for a fee; and (ii) Your use of the Product is on an AS IS basis without any warranty, and BMC, ITS AFFILIATESAND RESELLERS, AND LICENSORS DISCLAIM ANY AND ALL WARRANTIES (INCLUDING, WITHOUT LIMITATION, THEIMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT) ANDHAVE NO LIABILITY WHATSOEVER RESULTING FROM THE USE OF THIS PRODUCT UNDER THIS TRIAL LICENSE ("TrialLicense"). BMC may terminate for its convenience a Trial License upon notice to You. When the Trial Period ends, Your right to usethis Product automatically expires. If You want to continue Your use of the Product beyond the Trial Period, contact BMC to acquire acapacity-based license to the Product for a fee.

TERMINATION. This Agreement shall immediately terminate if You breach any of its terms. Upon termination, for any reason, Youmust uninstall the Software, and either certify the destruction of the Product or return it to BMC.

OWNERSHIP OF THE PRODUCT. BMC or its Affiliates or licensors retain all right, title and interest to and in the BMC Product and allintellectual property, informational, industrial property and proprietary rights therein. BMC neither grants nor otherwise transfers anyrights of ownership in the BMC Product to You. BMC Products are protected by applicable copyright, trade secret, and industrial andintellectual property laws. BMC reserves any rights not expressly granted to You herein.

CONFIDENTIAL AND PROPRIETARY INFORMATION. The BMC Products are and contain valuable confidential information of BMC("Confidential Information"). Confidential Information means non-public technical and non-technical information relating to the BMCProducts and Support, including, without limitation, trade secret and proprietary information, and the structure and organization of theSoftware. You may not disclose the Confidential Information to third parties. You agree to use all reasonable efforts to prevent theunauthorized use, copying, publication or dissemination of the Product.

WARRANTY. Except for a Trial License, BMC warrants that the Software will perform in substantial accordance with theDocumentation for a period of one year from the date of the order. This warranty shall not apply to any problems caused by software orhardware not supplied by BMC or to any misuse of the Software.

EXCLUSIVE REMEDY. BMC’s entire liability, and Your exclusive remedy, for any defect in the Software during the warranty period orbreach of the warranty above shall be limited to the following: BMC shall use reasonable efforts to remedy defects covered by thewarranty or replace the defective Software within a reasonable period of time, or if BMC cannot remedy or replace such defective copyof the Software, then BMC shall refund the amount paid by You for the License for that Software. BMC’s obligations in this section areconditioned upon Your providing BMC prompt access to the affected Software and full cooperation in resolving the claim.

DISCLAIMER. EXCEPT FOR THE EXPRESS WARRANTIES ABOVE, THE PRODUCT IS PROVIDED "AS IS." BMC, ITSAFFILIATES AND LICENSORS SPECIFICALLY DISCLAIM ALL OTHER WARRANTIES, INCLUDING, WITHOUT LIMITATION, THEIMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT. BMCDOES NOT WARRANT THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR FREE, OR THATALL DEFECTS CAN BE CORRECTED.

DISCLAIMER OF DAMAGES. IN NO EVENT IS BMC, ITS AFFILIATES OR LICENSORS LIABLE FOR ANY SPECIAL, INDIRECT,INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES RELATING TO OR ARISING OUT OF THIS AGREEMENT, SUPPORT,AND/OR THE PRODUCT (INCLUDING, WITHOUT LIMITATION, LOST PROFITS, LOST COMPUTER USAGE TIME, ANDDAMAGE OR LOSS OF USE OF DATA), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND IRRESPECTIVEOF ANY NEGLIGENCE OF BMC OR WHETHER SUCH DAMAGES RESULT FROM A CLAIM ARISING UNDER TORT ORCONTRACT LAW.

LIMITS ON LIABILITY. BMC’S AGGREGATE LIABILITY FOR DAMAGES IS LIMITED TO THE AMOUNT PAID BY YOU FOR THELICENSE TO THE PRODUCT.

SUPPORT. If Your order includes support for the Software, then BMC agrees to provide support (24 hours a day/7 days a week)("Support"). You will be automatically re-enrolled in Support on an annual basis unless BMC receives notice of termination from Youas provided below. There is a free support period during the one year warranty period.

(a) Support Terms. BMC agrees to make commercially reasonable efforts to provide the following Support: (i) For malfunctions ofsupported versions of the Software, BMC provides bug fixes, patches or workarounds in order to cause that copy of the Software tooperate in substantial conformity with its then-current operating specifications; and (ii) BMC provides new releases or versions, so longas such new releases or versions are furnished by BMC to all other enrolled Support customers without additional charge. BMC mayrefuse to provide Support for any versions or releases of the Software other than the most recent version or release of such Softwaremade available by BMC. Either party may terminate Your enrollment in Support upon providing notice to the other at least 30 days priorto the next applicable Support anniversary date. If You re-enroll in Support, BMC may charge You a reinstatement fee of 1.5 timeswhat You would have paid if You were enrolled in Support during that time period.

(b) Fees. The annual fee for Support is 20% of the Software’s list price less the applicable discount or a flat capacity based annual fee.BMC may change its prices for the Software and/or Support upon at least 30 days notice prior to Your support anniversary date.

Page 175: 6010792 Patrol Central Operator Web Edition Geting Started 20899

VERIFICATION. If requested by BMC, You agree to deliver to BMC periodic written reports, whether generated manually orelectronically, detailing Your use of the Software in accordance with this Agreement, including, without limitation, the License Capacity.BMC may, at its expense, audit Your use of the Software to confirm Your compliance with the Agreement. If an audit reveals that Youhave underpaid fees, You agree to pay such underpaid fees. If the underpaid fees exceed 5% of the fees paid, then You agree to alsopay BMC’s reasonable costs of conducting the audit.

EXPORT CONTROLS. You agree not to import, export, re-export, or transfer, directly or indirectly, any part of the Product or anyunderlying information or technology except in full compliance with all United States, foreign and other applicable laws and regulations.

GOVERNING LAW. This Agreement is governed by the substantive laws in force, without regard to conflict of laws principles: (a) inthe State of New York, if you acquired the License in the United States, Puerto Rico, or any country in Central or South America; (b) inthe Province of Ontario, if you acquired the License in Canada (subsections (a) and (b) collectively referred to as the "AmericasRegion"); (c) in Singapore, if you acquired the License in Japan, South Korea, Peoples Republic of China, Special AdministrativeRegion of Hong Kong, Republic of China, Philippines, Indonesia, Malaysia, Singapore, India, Australia, New Zealand, or Thailand(collectively, "Asia Pacific Region"); or (d) in the Netherlands, if you acquired the License in any other country not described above.The United Nations Convention on Contracts for the International Sale of Goods is specifically disclaimed in its entirety.

ARBITRATION. ANY DISPUTE BETWEEN YOU AND BMC ARISING OUT OF THIS AGREEMENT OR THE BREACH ORALLEGED BREACH, SHALL BE DETERMINED BY BINDING ARBITRATION CONDUCTED IN ENGLISH. IF THE DISPUTE ISINITIATED IN THE AMERICAS REGION, THE ARBITRATION SHALL BE HELD IN NEW YORK, U.S.A., UNDER THE CURRENTCOMMERCIAL OR INTERNATIONAL, AS APPLICABLE, RULES OF THE AMERICAN ARBITRATION ASSOCIATION. IF THEDISPUTE IS INITIATED IN A COUNTRY IN THE ASIA PACIFIC REGION, THE ARBITRATION SHALL BE HELD IN SINGAPORE,SINGAPORE UNDER THE CURRENT UNCITRAL ARBITRATION RULES. IF THE DISPUTE IS INITIATED IN A COUNTRYOUTSIDE OF THE AMERICAS REGION OR ASIA PACIFIC REGION, THE ARBITRATION SHALL BE HELD IN AMSTERDAM,NETHERLANDS UNDER THE CURRENT UNCITRAL ARBITRATION RULES. THE COSTS OF THE ARBITRATION SHALL BEBORNE EQUALLY PENDING THE ARBITRATOR’S AWARD. THE AWARD RENDERED SHALL BE FINAL AND BINDING UPONTHE PARTIES AND SHALL NOT BE SUBJECT TO APPEAL TO ANY COURT, AND MAY BE ENFORCED IN ANY COURT OFCOMPETENT JURISDICTION. NOTHING IN THIS AGREEMENT SHALL BE DEEMED AS PREVENTING EITHER PARTY FROMSEEKING INJUNCTIVE RELIEF FROM ANY COURT HAVING JURISDICTION OVER THE PARTIES AND THE SUBJECT MATTEROF THE DISPUTE AS NECESSARY TO PROTECT EITHER PARTY’S CONFIDENTIAL INFORMATION, OWNERSHIP, OR ANYOTHER PROPRIETARY RIGHTS. ALL ARBITRATION PROCEEDINGS SHALL BE CONDUCTED IN CONFIDENCE, AND THEPARTY PREVAILING IN ARBITRATION SHALL BE ENTITLED TO RECOVER ITS REASONABLE ATTORNEYS’ FEES ANDNECESSARY COSTS INCURRED RELATED THERETO FROM THE OTHER PARTY.

U.S. GOVERNMENT RESTRICTED RIGHTS. The Software under this Agreement is "commercial computer software" as that term isdescribed in 48 C.F.R. 252.227-7014(a)(1). If acquired by or on behalf of a civilian agency, the U.S. Government acquires thiscommercial computer software and/or commercial computer software documentation subject to the terms of this Agreement asspecified in 48 C.F.R. 12.212 (Computer Software) and 12.211 (Technical Data) of the Federal Acquisition Regulations ("FAR") and itssuccessors. If acquired by or on behalf of any agency within the Department of Defense ("DOD"), the U.S. Government acquires thiscommercial computer software and/or commercial computer software documentation subject to the terms of this Agreement asspecified in 48 C.F.R. 227.7202 of the DOD FAR Supplement and its successors.

MISCELLANEOUS TERMS. You agree to pay BMC all amounts owed no later than 30 days from the date of the applicable invoice,unless otherwise provided on the order for the License to the Products. You will pay, or reimburse BMC, for taxes of any kind, includingsales, use, duty, tariffs, customs, withholding, property, value-added (VAT), and other similar federal, state or local taxes (other thantaxes based on BMC’s net income) imposed in connection with the Product and/or the Support. This Agreement constitutes the entireagreement between You and BMC and supersedes any prior or contemporaneous negotiations or agreements, whether oral, written ordisplayed electronically, concerning the Product and related subject matter. No modification or waiver of any provision hereof will beeffective unless made in a writing signed by both BMC and You. You may not assign or transfer this Agreement or a License to a thirdparty without BMC’s prior written consent. Should any provision of this Agreement be invalid or unenforceable, the remainder of theprovisions will remain in effect. The parties have agreed that this Agreement and the documents related thereto be drawn up in theEnglish language. Les parties exigent que la présente convention ainsi que les documents qui s’y rattachent soient rédigés en anglais.

SW EULA Int 030102

Page 176: 6010792 Patrol Central Operator Web Edition Geting Started 20899
Page 177: 6010792 Patrol Central Operator Web Edition Geting Started 20899

Notes

Page 178: 6010792 Patrol Central Operator Web Edition Geting Started 20899

������������������������

*20899*


Recommended