www.fsw.uk.com 65

Friga-Bohn EVB Evaporators

EVB Fan assisted evaporators for Display Counters, Under Storage and Service Cabinets. Models M1, M2 and M3 are single side air discharge and models C1 and C2 have air discharge from both sides.The evaporators have a White casing and an ABS drip traywhich can be reversed according to site conditions. Easy removal of fan panel and drip tray for cleaning and maintenance.An electric defrost kit can be fitted if required.

Code Fan CoilDuty - Watts

at SC1 (10KTD)H110 EVB-M1 240H111 EVB-M2 320H112 EVB-M3 380

H115 EVB-C1 240H116 EVB-C2 410

Defrost KitsH118 Heater Kit To suit M1,M2,C1H119 Heater Kit To suit M3,C2

Standard Conditions:Condition Air Inlet Temperature Evaporating Temperature Standard TD

SC 1 +10°C 0°C 10K

The above duties will need correcting to the actual temperature difference. The duties indicated have been calculated using R404A. For other refrigerants please contact us for the relevant correction factor.

Specification:Air Vol. Defrost Dimensions (mm) Connections

Model Fans cu/m hr Watts L W H Liq. Suct. DrainEVB M1 1 65 210 370 80 440 5/16 5/16 16mmEVB M2 1 95 210 370 80 440 5/16 5/16 16mmEVB M3 1 105 290 490 80 440 5/16 5/16 16mmEVB C1 2 65 210 370 89 440 5/16 5/16 16mmEVB C2 2 110 290 490 89 440 5/16 5/16 16mm

Sales Office: 01543 437 01066

Friga-Bohn MF / MR Evaporators

Micro-freeze (MF) and Mini-freeze (MR) Compact Evaporatorsare suitable for installation in Cabinets and small Cold Rooms.The casings are made using special shock resistant ABS plasticaccording to the most severe hygiene standards. The coil blocks aremanufactured using copper tube with helical internal grooving to increasethe heat exchange coefficient and corrugated fins to maintain a highturbulence effect. MR & MF standard Polyster coated/

Code Model Duty - Watts Duty - Watts Duty - WattsHigh Temperature at SC 2 (8KTD)H120 MF 1 350 -H121 MF 2 400 -H122 MF 3 750 -H123 MF 4 790 -

Electric Defrost - at SC 3 (7KTD) at SC 4 (6KTD)H126 MFE 1 - 270 190 H127 MFE 2 - 320 240H128 MFE 3 - 580 430H129 MFE 4 - 640 450

High Temperature at SC 2 (8KTD)H170 MR 75R 680 - -H171 MR 110R 1070 - -H172 MR 135R 1270 - -H173 MR 210R 2060 - -H174 MR 270R 2620 - -

Electric Defrost at SC 3 (7KTD) at SC 4 (6KTD)H178 MRE 75+E - 530 420 H179 MRE 110+E - 820 640H180 MRE 135+E - 1070 840H181 MRE 210+E - 1660 1320H182 MRE 270+E - 2230 1780

Application:Model Air Inlet Temperature Fin Spacing Defrost

MF +10°C/+2°C 4.23 mm (6 fpi) NoneMFE -10°C/-25°C 4.23 mm (6 fpi) Electric

MR**R +10°C/+2°C 4.23 mm (6 fpi) NoneMRE**E -10°C/-25°C 4.23 mm (6 fpi) Electric

Standard Conditions:Condition Air Inlet Temperature Evaporating Temperature Standard TDSC 2 0°C -8°C 8KSC 3 -18°C -25°C 7KSC 4 -25°C -31°C 6K

The above duties will need correcting to the actual temperature difference. The duties indicated have been calculated using R404A. For other refrigerants please contact us for the relevant correction factor.

www.fsw.uk.com 67

Friga-Bohn Evaporators

Specification: Air Vol. Defrost Dimensions (mm) Connections

Model cu.m/hr Fans Watts L W D Liq Suct. DrainMF 1 270 1 140 399 429 150 5/16 5/16 1/2”MF 2 250 1 160 399 429 150 5/16 5/16 1/2”MF 3 460 2 330 599 429 150 5/16 5/16 1/2”MF 4 430 2 330 599 429 150 5/16 5/16 1/2”MR 75 290 1 400 514 438 209 3/8 3/8 1”MR 110 650 2 440 784 438 209 3/8 3/8 1”MR 135 580 2 730 784 438 209 3/8 3/8 1”MR 210 870 3 1200 1174 438 209 1/2 5/8 1”MR 270 1160 4 1600 1504 438 209 1/2 3/4 1”

Sales Office: 01543 437 01068

Friga-Bohn SD Evaporators

SD Evaporators come with White ABS cases for easy cleaning and have no sharp corners.

Code Model Duty - WattsHigh Temperature at SC2 (8KTD)H200 SD024R 2100H201 SD030R 2410H202 SD038R 2860H203 SD052R 3690H204 SD062R 5040H205 SD082R 6310H206 SD104R 7580H207 SD118R 9050H208 SD148R 10790H209 SD158R 12180Electric Defrost at SC 2 (8KTD)H210 SD024R+ECK 2100H211 SD030R+ECK 2410H212 SD038R+ECK 2860H213 SD052R+ECK 3690H214 SD062R+ECK 5040H215 SD082R+ECK 6310H216 SD104R+ECK 7580H217 SD118R+ECK 9050H218 SD148R+ECK 10790H219 SD158R+ECK 12180

Application:Model Air Inlet Temperature Fin Spacing DefrostSD***R +10°C/+2°C 4.23 mm (6 fpi) None

SD***R+ECK +10°C/-5°C 4.23 mm (6 fpi) Electric

Standard Conditions:Condition Air Inlet Temperature Evaporating Temperature Standard TD

SC 2 0°C -8°C 8K

The above duties will need correcting to the actual temperature difference. The duties indicated have been calculated using R404A. For other refrigerants please contact us for the relevant correction factor.

www.fsw.uk.com 69

Friga-Bohn SD Evaporators

Specification: Air Vol. Air Defrost Dimensions (mm) Connections

Model cu.m/hr Fans Throw Watts * L W H Liq Suct. DrainSD024R 1530 1 13 1000 710 410 458 1/2 1/2 1”SD030R 1470 1 13 1000 710 410 458 1/2 1/2 1”SD038R 1330 1 12 1000 710 410 458 1/2 1/2 1”SD052R 1570 1 14 1600 940 410 460 1/2 5/8 1”SD062R 2990 2 13 2160 1170 410 463 1/2 5/8 1”SD082R 3260 2 15 3280 1630 410 468 5/8 7/8 1”SD104R 3200 2 14 3280 1630 410 468 5/8 7/8 1”SD118R 4090 3 13 3280 1630 410 468 5/8 7/8 1”SD148R 4560 3 14 4400 2090 410 473 5/8 1-1/8 1”SD158R 5470 4 13 4400 2090 410 473 5/8 1-1/8 1”

All models should be fitted with externally equalised expansion valves.

Sales Office: 01543 437 01070

Friga Bohn MUC Evaporators

MUC Evaporators are suitable for chilling or low temperature storage applications. There are twenty-four models with capacities ranging from 1.7 kW through to 13.7 kW. The cases are made of White Enamelled Steel.

Code Model Duty – WattsHigh Temperature at SC 2 (8KTD)H300 MUC145R 1850H301 MUC200R 2310H302 MUC285R 3480H303 MUC320R 3830H304 MUC420R 4940H305 MUC520R 5890H306 MUC620R 7170H341 MUC640R 8230H342 MUC660R 9560H343 MUC670R 10890H307 MUC780R 12010H308 MUC960R 13670

Electric Defrost at SC 2 (8KTD)H310 MUC145R+E1K 1850H311 MUC200R+E1K 2310H312 MUC285R+E1K 3480H313 MUC320R+E1K 3830H314 MUC420R+E1K 4940H315 MUC520R+E1K 5890H316 MUC620R+E1K 7170H344 MUC640R+E1K 8230H345 MUC660R+E1K 9560H346 MUC670R+E1K 10890H317 MUC780R+E1K 12010H318 MUC960R+E1K 13670

High Temperature at SC 2 (8KTD)H320 MUC140L 1700H321 MUC195L 2070H322 MUC280L 3170H323 MUC315L 3430H324 MUC415L 4520H325 MUC515L 5490H326 MUC615L 6420H347 MUC635L 6890H348 MUC655L 7410H349 MUC665L 9000H327 MUC775L 10610H328 MUC955L 12200

Electric Defrost at SC 2 (8KTD)H330 MUC140L+E1K 1700H331 MUC195L+E1K 2070H332 MUC280L+E1K 3170H333 MUC315L+E1K 3430H334 MUC415L+E1K 4520H335 MUC515L+E1K 5490H336 MUC615L+E1K 6420H337 MUC775L+E1K 10610H338 MUC955L+E1K 12200

The above duties will need correcting to the actual temperature difference. The duties indicated have been calculated using R404A. For other refrigerants please contact us for the relevant correction factor.

www.fsw.uk.com 71

Friga-Bohn MUC Evaporators

Specification: Air Vol. Air Defrost Dimensions (mm) Connections

Model cu.m/hr Fans Throw Watts * L W H Liq Suct.MUC145R 1246 1 12 420 560 400 357 1/2 1/2MUC200R 1239 1 12 630 560 464 357 1/2 1/2MUC285R 2336 2 12 780 966 400 357 1/2 5/8MUC320R 2076 2 12 960 966 400 357 1/2 5/8MUC420R 2562 2 12 1320 1220 400 357 1/2 3/4MUC520R 3252 3 12 1560 1220 464 357 1/2 3/4MUC620R 3696 3 12 1860 1650 400 357 1/2 7/8MUC640R 3264 3 12 2550 1990 400 365 1/2 7/8MUC660R 3486 3 12 3150 2340 400 365 7/8 7/8MUC670R 4168 4 12 3150 2340 400 365 7/8 7/8MUC780R 7095 2 28 2340 1650 495 482 7/8 1-1/8MUC960R 7895 2 45 3480 1650 590 482 1-1/8 1-3/8MUC140L 1217 1 12 420 560 400 357 1/2 1/2MUC195L 1239 1 12 630 560 464 357 1/2 1/2MUC280L 2267 2 12 780 966 400 357 1/2 5/8MUC315L 2075 2 12 960 966 400 357 1/2 5/8MUC415L 2561 2 12 1320 1220 400 357 1/2 3/4MUC515L 3250 3 12 1560 1220 464 357 1/2 3/4MUC615L 3694 3 12 1860 1650 400 357 1/2 7/8MUC635L 3435 3 12 2550 1990 400 365 1/2 7/8MUC655L 3624 3 12 3150 2340 400 365 7/8 7/8MUC665L 4436 4 12 3150 2340 400 365 7/8 7/8MUC775L 7093 2 28 2340 1650 495 482 7/8 1-1/8MUC955L 7893 2 45 3480 1650 590 482 1-1/8 1-3/8

All models should be fitted with externally equalised expansion valves.

Application:Model Air Inlet Temperature Fin Spacing DefrostMUC***R +10°C/+2°C 4.23 mm (6 fpi) NoneMUC***R+E1K +10°C/-5°C 4.23 mm (6 fpi) ElectricMUC***L +10°C/+2°C 6.35 mm (4 fpi) NoneMUC***L+E1K +10°C/-5°C 6.35 mm (4 fpi) Electric

Standard Conditions:Condition Air Inlet Temperature Evaporating Temperature Standard TD

SC 2 0°C -8°C 8K

The above duties will need correcting to the actual temperature difference. The duties indicated have been calculated using R404A. For other refrigerants please contact us for the relevant correction factor.

Sales Office: 01543 437 01072

Friga Bohn LUC Evaporators

LUC Evaporators are suitable for low temperature storage applications. There are eighteen models with capacities ranging from 1 kW through to 10.6 kW. The cases are made of White Enamelled Steel with aluminium drip trays.

Code Model Duty – Watts Duty - WattsElectric Defrost at SC 3 (7KTD) at SC 4 (6KTD)H350 LUC155E 1420 1100H351 LUC210E 1840 1440H352 LUC295E 2690 2040H353 LUC350E 3030 2370H354 LUC440E 3960 3120H355 LUC550E 4860 3820H356 LUC650E 5680 4480H359 LUC700E 6920 5730H372 LUC710E 7510 6220H373 LUC720E 8470 6940H357 LUC840E 9240 7260H358 LUC1030E 10600 8360

Electric Defrost at SC 3 (7KTD) at SC 4 (6KTD)H360 LUC150C 1300 1030 H361 LUC205C 1670 1310H362 LUC290C 2480 1960H363 LUC345C 2780 2200H364 LUC435C 3580 2830H365 LUC545C 4390 3480H366 LUC645C 5170 4110H369 LUC695C 5680 4760H370 LUC705C 6210 5180H371 LUC715C 7080 5890H367 LUC835C 8380 6610H368 LUC1025C 9640 7620

Application:Model Air Inlet Temperature Fin Spacing DefrostLUC***E -10°C/-25°C 4.23 mm (6 fpi) Heavy Duty ElectricLUC***C -10°C/-25°C 6.35 mm (4 fpi) Heavy Duty Electric

Standard Conditions:Condition Air Inlet Temperature Evaporating Temperature Standard TD

SC 3 -18°C -25°C 7KSC 4 -25°C -31°C 6K

The above duties will need correcting to the actual temperature difference. The duties indicated have been calculated using R404A. For other refrigerants please contact us for the relevant correction factor.

www.fsw.uk.com 73

Friga-Bohn LUC Evaporators

Specification:Air Vol. Air Defrost Dimensions (mm) Connections

Model cu.m/hr Fans Throw Watts * L W H Liq Suct.LUC155E 1246 1 12 1300 560 400 357 1/2 1/2LUC210E 1239 1 12 2150 560 464 357 1/2 5/8LUC295E 2336 2 12 2000 966 400 357 1/2 3/4LUC350E 2076 2 12 3000 966 400 357 1/2 3/4LUC440E 2562 2 12 3600 1220 400 357 1/2 7/8LUC550E 3252 3 12 3600 1220 464 357 1/2 7/8LUC650E 3696 3 12 5640 1650 400 357 1/2 1-1/8LUC700E 3264 3 12 6900 1990 400 365 7/8 1-1/8LUC710E 3486 3 12 8400 2340 400 365 7/8 1-1/8LUC720E 4168 4 12 8400 2340 400 365 7/8 1-1/8LUC840E 7095 2 28 5640 1650 495 482 1-1/8 1-3/8LUC1030E 7895 2 45 8460 1650 590 482 1-1/8 1-3/8LUC150C 1217 1 12 2150 560 400 357 1/2 5/8LUC205C 1239 1 12 2150 560 464 357 1/2 5/8LUC290C 2267 2 12 3000 966 400 357 1/2 3/4LUC345C 2075 2 12 3000 966 400 357 1/2 3/4LUC435C 2561 2 12 3600 1220 400 357 1/2 7/8LUC545C 3250 3 12 3600 1220 464 357 1/2 7/8LUC645C 3694 3 12 5640 1650 400 357 7/8 1-1/8LUC695C 3435 3 12 6900 1990 400 635 7/8 1-1/8LUC705C 3624 3 12 8400 2340 400 365 7/8 1-1/8LUC715C 4436 4 12 8400 2340 400 365 7/8 1-1/8LUC835C 7093 2 28 5640 1650 495 482 1-1/8 1-3/8LUC1025C 7893 2 45 8460 1650 590 482 1-1/8 1-3/8

All models should be fitted with externally equalised expansion valves.

Sales Office: 01543 437 01074

Friga-Bohn SKB Evaporators

SKB Evaporators are suitable for chilling or low temperature storage applications.There are eighteen models with capacities ranging from 5.2 kW through to 29.5 kW.The cases are made of White enamelled galvanised sheet. All Models are fitted with 3PH Fans.

Code Model Duty - Watts Duty - WattsHigh Temperature at SC 2 (8KTD)H399 SKB06R 7620 -H400 SKB10R 13070 -H401 SKB12R 15260 -H402 SKB16R 20170 -H403 SKB19R 22780 -H404 SKB24R 29340 -Electric Defrost at SC 2 (8KTD)H409 SKB06R+E1K 7620 -H410 SKB10R+E1K 13070 -H411 SKB12R+E1K 15260 -H412 SKB16R+E1K 20170 -H413 SKB19R+E1K 22780 -H414 SKB24R+E1K 29340 -Electric Defrost at SC 2 (8KTD)H419 SKB06L 6560 -H420 SKB09L 10420 -H421 SKB11L 13430 -H422 SKB14L 15540 -H423 SKB18L 20140 -H424 SKB22L 25920 -Electric Defrost at SC 2 (8KTD)H429 SKB06L+E1K 6560 -H430 SKB09L+E1K 10420 -H431 SKB11L+E1K 13430 -H432 SKB14L+E1K 15540 -H433 SKB18L+E1K 20140 -H434 SKB22L+E1K 25920 -Electric Defrost at SC 3 (7KTD) at SC 4 (6KTD)H439 SKB06E 6150 4820H440 SKB09E 10110 8000H441 SKB11E 12560 10000H442 SKB13E 15290 12090H443 SKB16E 18950 15130H444 SKB21E 23470 18590Electric Defrost at SC 3 (7KTD) at SC 4 (6KTD)H449 SKB05C 5240 4170 H450 SKB08C 8050 6630H451 SKB10C 10650 8530H452 SKB12C 12380 9870H453 SKB15C 16080 12890H454 SKB19C 20170 16070

For application notes and standard conditions please see facing page.The above duties will need correcting to the actual temperature difference. The duties indicated have been calculated using R404A.

www.fsw.uk.com 75

Friga-Bohn SKB Evaporators

Specification: Air Vol. Air Defrost Dimensions (mm) Connections

Model cu.m/hr Fans Throw Watts L W H Liq Suct.SKB06R 3800 1 16 1050 1061 592 641 5/8 7/8SKB10R 8200 2 18 1500 1711 592 641 1-1/8 1-3/8SKB12R 7600 2 18 2100 1711 592 641 1-1/8 1-3/8SKB16R 12300 3 20 2100 2361 592 643 1-1/8 1-5/8SKB19R 11400 3 20 3000 2361 592 643 1-1/8 1-5/8SKB24R 14800 4 22 3600 2811 592 645 1-5/8 1-5/8SKB06L 4000 1 16 1050 1061 592 641 5/8 7/8SKB09L 8600 2 18 1500 1711 592 641 7/8 1-1/8SKB11L 8000 2 18 2100 1711 592 641 1-1/8 1-3/8SKB14L 12900 3 20 2100 2361 592 643 1-1/8 1-3/8SKB18L 12000 3 20 3000 2361 592 643 1-1/8 1-5/8SKB22L 15600 4 22 3600 2811 592 645 1-5/8 1-5/8SKB06E 3800 1 16 1050 1061 592 641 7/8 1-1/8SKB09E 8200 2 18 1500 1711 592 641 1-1/8 1-3/8SKB11E 7600 2 18 2100 1711 592 641 1-1/8 1-5/8SKB13E 12300 3 20 2100 2361 592 643 1-1/8 1-5/8SKB16E 11400 3 20 3000 2361 592 643 1-5/8 1-5/8SKB21E 14800 4 22 3600 2811 592 645 1-5/8 2-1/8SKB05C 4000 1 16 1050 1062 592 641 7/8 1-1/8SKB08C 8600 2 18 1500 1711 592 641 1-1/8 1-3/8SKB10C 8000 2 18 2100 1711 592 641 1-1/8 1-5/8SKB12C 12900 3 20 2100 2361 592 643 1-1/8 1-5/8SKB15C 12000 3 20 3000 2361 592 643 1-5/8 1-5/8SKB19C 15600 4 22 3600 2811 592 645 1-5/8 2-1/8

All models should be fitted with externally equalised expansion valves.

Application:Model Air Inlet Temperature Fin Spacing DefrostSKB**R +10°C/+2°C 4.23 mm (6 fpi) NoneSKB**R+E1K +10°C/-5°C 4.23 mm (6 fpi) ElectricSKB**L +10°C/+2°C 6.35 mm (4 fpi) NoneSKB**L+E1K +10°C/-5°C 6.35 mm (4 fpi) ElectricSKB**E -10°C/-25°C 4.25 mm (6 fpi) Heavy Duty ElectricSKB**C -10°C/-25°C 6.35 mm (4 fpi) Heavy Duty Electric

Standard Conditions:Condition Air Inlet Temperature Evaporating Temperature Standard TD

SC 2 0°C -8°C 8KSC 3 -18°C -25°C 7KSC 4 -25°C -31°C 6K

Sales Office: 01543 437 01076

Friga-Bohn TA Evaporators

TA Evaporators are dual discharge and designed for installationin Cold Rooms, Airlocks, Laboratories, Preparation and Packing Rooms.They come with a choice of fin spacing and fan speed - please see application notes below. Defrost heaters can be supplied if required.

Code Model Duty - Watts Duty - WattsHigh Temperature at SC 1 (10KTD) at SC 2 (8KTD)H500 TA1R4P 5200 3380H501 TA2R4P 7970 5310H502 TA3R4P 9870 6530H503 TA4R4P 10780 7000H504 TA5R4P 14970 9930H505 TA6R4P 18340 12180H506 TA7R4P 21860 14420High Temperature at SC 1 (10KTD) at SC 2 (8KTD)H510 TA1R6P 3930 2611H511 TA2R6P 6090 4090H512 TA3R6P 7460 4990H513 TA4R6P 8060 5370H514 TA5R6P 11260 7550H515 TA6R6P 13211 8890H516 TA7R6P 16323 10900High Temperature at SC 1 (10KTD) at SC 2 (8KTD)H520 TA1R8P 3290 2200H521 TA2R8P 5080 3420H522 TA3R8P 6211 4181H523 TA4R8P 6700 4500H524 TA5R8P 9350 6320H525 TA6R8P 10690 7330H526 TA7R8P 13490 9131

Application:Model Air Inlet Temperature Fin Spacing Fan MotorsTA*R4P +15°C/+2°C (See Note) 3.63 mm (7 pfi) 4 Pole - 1500 RPMTA*R6P +15°C/+2°C (See Note) 3.63 mm (7 pfi) 6 Pole - 1000 RPMTA*R8P +15°C/+2°C (See Note) 3.63 mm (7 pfi) 8 Pole - 750 RPM

NOTE: For applications with an air inlet temperature of below +2°C defrost heaters will be necessary.

Standard Conditions:Condition Air Inlet Temperature Evaporating Temperature Standard TD

SC 1 +10°C 0°C 10KSC 2 0°C -8°C 8K

The above duties will need correcting to the actual temperature difference. The duties indicated have been calculated using R404A. For other refrigerants please contact us for the relevant correction factor.

www.fsw.uk.com 77

Friga-Bohn TA Evaporators

Specification: Air Vol. Air Sound Dimensions (mm) Connections

Model cu.m/hr Fans Throw Level L W H Liq Suct.TA1R4P 1995 1 10 39 866 800 344 5/8 5/8TA2R4P 4390 2 12 42 1366 800 344 5/8 5/8TA3R4P 4170 2 11 42 1366 800 344 5/8 7/8TA4R4P 3985 2 10 42 1366 800 344 5/8 7/8TA5R4P 6255 3 11 44 1866 800 344 5/8 7/8TA6R4P 5755 3 10 44 1866 800 344 5/8 1-1/8TA7R4P 7975 4 10 45 2366 800 344 5/8 1-1/8TA1R6P 1310 1 7 29 866 800 344 5/8 5/8TA2R6P 2910 2 7 32 1366 800 344 5/8 5/8TA3R6P 2750 2 7 32 1366 800 344 5/8 7/8TA4R6P 2615 2 7 32 1366 800 344 5/8 7/8TA5R6P 4125 3 7 34 1866 800 344 5/8 7/8TA6R6P 3765 3 6 34 1866 800 344 5/8 1-1/8TA7R6P 5230 4 7 35 2366 800 344 5/8 1-1/8TA1R8P 945 1 5 22 866 800 344 5/8 5/8TA2R8P 2100 2 6 25 1366 800 344 5/8 5/8TA3R8P 1980 2 5 25 1366 800 344 5/8 7/8TA4R8P 1895 2 5 25 1366 800 344 5/8 7/8TA5R8P 2975 3 5 27 1866 800 344 5/8 7/8TA6R8P 2730 3 5 27 1866 800 344 5/8 1-1/8TA7R8P 3785 4 5 28 2366 800 344 5/8 1-1/8

Sound pressure levels are given in dB(A) at Lp 4m (3)All models should be fitted with externally equalised expansion valves.

Defrost Kits

Code Model To suit Model Defrost WattsH560 KT6B01E1K TA1*** 800H561 KT6B02E1K TA2*** 800H562 KT6B03E1K TA3*** 1200H563 KT6B04E1K TA4*** 1600H564 KT6B05E1K TA5*** 1800H565 KT6B06E1K TA6*** 3000H566 KT6B07E1K TA7*** 3200

Sales Office: 01543 437 01078

Friga-Bohn GT2I Evaporators

GT21 Evaporators are dual discharge and designed for installation in Cold Rooms, Airlocks, Laboratories, Preparation and Packing Rooms. They come with a choice of fin spacing and fan speeds - please see application notes on facing page. Defrost heaters can be supplied if required.

Code Model Duty - Watts Duty - WattsHigh Temperature at SC 1 (10KTD) at SC 2 (8KTD)H650 GT2I 24R 6/8P 47910 26650H651 GT2I 26R 6/8P 57660 33500H652 GT2I 28R 6/8P 61560 37560H653 GT2I 34R 6/8P 71950 40150H654 GT2I 36R 6/8P 86430 50250H655 GT2I 38R 6/8P 90610 55620H656 GT2I 44R 6/8P 96100 53620H657 GT2I 46R 6/8P 112690 66480H658 GT2I 48R 6/8P 123330 75350High Temperature at SC 1 (10KTD) at SC 2 (8KTD)H660 GT2I 24R 8/12P 40810 23340H661 GT2I 26R 8/12P 46030 27880H662 GT2I 28R 8/12P 49910 31050H663 GT2I 34R 8/12P 61220 35090H664 GT2I 36R 8/12P 69110 41920H665 GT2I 38R 8/12P 74270 46440H666 GT2I 44R 8/12P 81740 46820H667 GT2I 46R 8/12P 93970 57000H668 GT2I 48R 8/12P 99610 62500High Temperature at SC 1 (10KTD) at SC 2 (8KTD)H670 GT2I 24L 6/8P 42620 24090H671 GT2I 26L 6/8P 52780 30830H672 GT2I 28L 6/8P 58740 35610H673 GT2I 34L 6/8P 63990 36200H674 GT2I 36L 6/8P 76710 45590H675 GT2I 38L 6/8P 86870 52870H676 GT2I 44L 6/8P 85410 48310H677 GT2I 46L 6/8P 104550 61830H678 GT2I 48L 6/8P 117680 71400High Temperature at SC 1 (10KTD) at SC 2 (8KTD)H680 GT2I 24L 8/12P 35790 20800H681 GT2I 26L 8/12P 43200 26220H682 GT2I 28L 8/12P 47880 29850H683 GT2I 34L 8/12P 53770 31220H684 GT2I 36L 8/12P 64870 39400H685 GT2I 38L 8/12P 71690 44640H686 GT2I 44L 8/12P 70990 41810H687 GT2I 46L 8/12P 87710 53230H688 GT2I 48L 8/12P 96210 59740

Standard Conditions:Condition Air Inlet Temperature Evaporating Temperature Standard TD

SC 1 +10°C 0°C 10KSC 2 0°C -8°C 8K

The above duties will need correcting to the actual temperature difference. The duties indicated have been calculated using R404A. For other refrigerants please contact us for the relevant correction factor. Please see facing page for application notes.

www.fsw.uk.com 79

Friga-Bohn GT2I Evaporators

Specification:Model Air Vol. Air Sound Dimensions (mm) ConnectionsGT2I cu.m/hr Fans Throw 6P / 8P L W H Liquid Suction24R 6/8P 20550 2 17 M 50 / 46 2662 1445 684 7/8 1-5/826R 6/8P 18440 2 15 M 50 / 46 2662 1445 684 1-1/8 1-5/828R 6/8P 16910 2 14 M 50 / 46 2662 1445 684 1-1/8 1-5/834R 6/8P 30820 3 17 M 52 / 48 3714 1445 684 1-1/8 2-1/836R 6/8P 27660 3 15 M 52 / 48 3714 1445 684 1-3/8 2-1/838R 6/8P 25370 3 14 M 52 / 48 3714 1445 684 1-3/8 2-1/844R 6/8P 41090 4 17 M 53 / 49 4766 1445 684 1-3/8 2-1/846R 6/8P 36880 4 15 M 53 / 49 4766 1445 684 1-3/8 2-5/848R 6/8P 33820 4 14 M 53 / 49 4766 1445 684 1-5/8 2-5/824R 8/12P 15470 2 12 M 43 / 38 2662 1445 684 7/8 1-3/826R 8/12P 13770 2 11 M 43 / 38 2662 1445 684 7/8 1-5/828R 8/12P 12550 2 10 M 43 / 38 2662 1445 684 7/8 1-5/834R 8/12P 23210 3 12 M 45 / 40 3714 1445 684 1-1/8 2-1/836R 8/12P 20600 3 11 M 45 / 40 3714 1445 684 1-1/8 2-1/838R 8/12P 18830 3 10 M 45 / 40 3714 1445 684 1-3/8 2-1/844R 8/12P 30940 4 12 M 46 / 41 4766 1445 684 1-3/8 2-1/846R 8/12P 27540 4 11 M 46 / 41 4766 1445 684 1-3/8 2-1/848R 8/12P 25110 4 10 M 46 / 41 4766 1445 684 1-5/8 2-5/824L 6/8P 21800 2 18 M 50 / 46 2662 1445 684 7/8 1-5/826L 6/8P 19540 2 16 M 50 / 46 2662 1445 684 7/8 1-5/828L 6/8P 18040 2 15 M 50 / 46 2662 1445 684 1-1/8 1-5/834L 6/8P 32700 3 18 M 52 / 48 3714 1445 684 1-1/8 2-1/836L 6/8P 29300 3 16 M 52 / 48 3714 1445 684 1-1/8 2-1/838L 6/8P 27060 3 15 M 52 / 48 3714 1445 684 1-3/8 2-1/844L 6/8P 43600 4 18 M 53 / 49 4766 1445 684 1-3/8 2-1/846L 6/8P 39070 4 16 M 53 / 49 4766 1445 684 1-3/8 2-5/848L 6/8P 36080 4 15 M 53 / 49 4766 1445 684 1-5/8 2-5/824L 8/12P 16060 2 11 M 43 / 38 2662 1445 684 5/8 1-3/826L 8/12P 14700 2 10 M 43 / 38 2662 1445 684 7/8 1-3/828L 8/12P 13440 2 9 M 43 / 38 2662 1445 684 7/8 1-3/834L 8/12P 24080 3 11 M 45 / 40 3714 1445 684 7/8 1-5/836L 8/12P 22050 3 10 M 45 / 40 3714 1445 684 1-1/8 1-5/838L 8/12P 20160 3 9 M 45 / 40 3714 1445 684 1-3/8 2-1/844L 8/12P 32110 4 11 M 46 / 41 4766 1445 684 1-1/8 2-1/846L 8/12P 29400 4 10 M 46 / 41 4766 1445 684 1-3/8 2-1/848L 8/12P 26880 4 9 M 46 / 41 4766 1445 684 1-5/8 2-1/8

All motors are 400 volt, 3 PH, Dual Speed. Duties, air volumes, air throw and sound levels are all quoted using the higher of the two speeds. If you require data for the lower speeds pleasecontact our sales office.

Sound pressure levels are given in dB(A) at 4 Metres.All models should be fitted with externally equalised expansion valves.

Model Air Inlet Temperature Fin Spacing Fan MotorsGT21 **R +15°C/-1°C (See Note) 4.23 mm (6 fpi) 4 Pole - 1500 RPMGT21 **L +15°C/-1°C (See Note) 7.00 mm (3.6 fpi) 6 Pole - 1000 RPM

NOTE: For applications with an air inlet temperature of below +5°C defrost heaters will be necessary.

Defrost Kits

Code Model To Suit Model Defrost WattsH690 KT6C18872 GT21 24, 26, 28 9000H691 KT6C18873 GT21 34, 36, 38 13800H692 KT6C18874 GT21 44, 46, 48 18000

Sales Office: 01543 437 01080

Friga-Bohn Spares

Code Description Part Number To SuitH910 Motor/Fan Assembly PD3502900 MF/MFE & MR/MREH911 Motor/Fan Assembly PD0210300 XR60, 72, 80 & 90H912 Motor/Fan Assembly PD0210290 XR85, 100, 105 &122H913 Motor/Fan Assembly PD5F00000 SD – All ModelsH914 Motor/Fan Assembly PD6B04200 TA – 04P/230V/1/50HzH915 Motor/Fan Assembly PD6B06200 TA – 06P/230V/1/50HzH916 Motor/Fan Assembly PD6B08200 TA – 08P/230V/1/50HzH917 Motor/Fan Assembly PD0210420 GTI – 04P/50HzH918 Motor/Fan Assembly PD0210430 GTI – 06P/50HzH919 Motor/Fan Assembly PD0210440 GTI – 08P/50HzH920 Motor/Fan Assembly PD0210030 MUC145R to MUC620R

LUC150C to LUC645CH921 Motor/Fan Assembly PD0210140 MUC780R

LUC835CH922 Motor/Fan Assembly PD0210160 MUC 960R

LUC1025CH923 Motor/Fan Assembly PD5900000 SK All ModelsH924 Motor/Fan Assembly PDVE00093 SKB All ModelsH925 1ph Motor PD3507000 MUC780R

LUC835CMUC 960RLUC1025C

H930 Defrost Heater PD650483C MFE 1H931 Defrost Heater PD650484C MFE 2H932 Defrost Heater PD650569C MFE 3 & 4H933 Defrost Heater PD6A3315B MRE 75H934 Defrost Heater PD6A3316B MRE 110H935 Defrost Heater PD6A3314B MRE 135H936 Defrost Heater PD6A3300B MRE 210H937 Defrost Heater PD6A3299B MRE 270H940 Heater - Coil or Tray PD0101136 SD024, 030, 038R

SD021, 027, 035CH941 Heater - Coil or Tray PD0101137 SD052R

SD048CH942 Heater - Coil or Tray PD0101138 SD062R

SD073CH943 Heater - Coil or Tray PD0101139 SD082, 104, 118R

SD095, 110CH944 Heater - Coil or Tray PD0101140 SD148, 158R

SD136, 148C

www.fsw.uk.com 81

Friga-Bohn Spares

Code Description Part Number To SuitH950 E1K Kit KT5C0747C MUC145RH951 E1K Kit KT5C0748C MUC200RH952 E1K Kit KT5C0749C MUC285RH953 E1K Kit KT5C0750C MUC320RH954 E1K Kit KT5C0751C MUC420RH955 E1K Kit KT5C0752C MUC520RH956 E1K Kit KT5C0753C MUC620RH957 E1K Kit KT5C0754C MUC780RH958 E1K Kit KT5C6755C MUC960RH960 Coil Heater PD0310010 LUC150, 205CH961 Coil Heater PD0310020 LUC290, 345CH962 Coil Heater PD0310030 LUC435, 545CH963 Coil Heater PD0310040 LUC645, 835, 1015CH964 Tray Heater PD0320010 LUC150, 205CH965 Tray Heater PD0320020 LUC290, 345CH966 Tray Heater PD0320030 LUC435, 545CH967 Tray Heater PD0320040 LUC645, 835, 1015CH970 Coil Heater PD010594C SK10R, SK08CH971 Coil Heater PD010592C SK12R, SK10CH972 Coil Heater PD010624C SK16R, SK12CH973 Coil Heater PD010593C SK19R, SK15CH974 Coil Heater PD010625C SK24R, SK19CH975 Tray Heater PD020636C SK10R, SK08CH976 Tray Heater PD020589C SK12R, SK10CH977 Tray Heater PD020637C SK16R, SK12CH978 Tray Heater PD020588C SK19R, SK15CH979 Tray Heater PD020590C SK24R, SK19C

Sales Office: 01543 437 01082

The NEW TEC Cooler The next generation in cooling

GEA Heat Exchangers GEA Searle

GEA Searle

www.searle.co.uk

TEC Cooler

The TEC range of nine small ‘blow through’ unit coolers us-ing high efficiency EC fans as standard, provid a significant reduction in energy consumption and therefore running costs. With a wide operating range + 10 °C to -40 °C, the coolers are suitable for both high, medium and low tem-perature applications.

High efficiency EC fans

Motor power input of only 20W, a 67% saving Vs TG

1, 2 or 3 fan configurations

Ceiling or wall mounted

Pleasing aesthetic design

Motors suitable for 230V, single phase, 50 / 60 Hz supply,

www.fsw.uk.com 83

Sales Office: 01543 437 01084

Searle - TEC Unit Cooler

TEC is a range of nine small ‘blow through’ unit coolers using high efficiency EC fans as standard, providing a significant reduction in energy consumption and therefore running costs. With a wide operating range + 10 °C to -40 °C, the coolers are suitable for both high, medium and low temperature applications in areas such as reach-in and walk - in cold cabinets, small cold rooms and similar situations. Nominal capacities are from 0.52kW to 3.4kW (Standard Condition 2) when used with low ozone depletion refrigerants such as R134a, R404A and R507A

Code Fan Coil Duty - Watts

5mm Fin Spacing at SC2 (8KTD)R1000 TEC1-5FPI-NO DEFROST 0.52R1001 TEC2-5FPI-NO DEFROST 0.84R1002 TEC3-5FPI-NO DEFROST 1.00R1003 TEC3.5-5FPI-NO DEFROST 1.15R1004 TEC4-5FPI-NO DEFROST 1.61R1005 TEC5-5FPI-NO DEFROST 1.89R1006 TEC6-5FPI-NO DEFROST 2.14R1007 TEC7-5FPI-NO DEFROST 2.76R1008 TEC8-5FPI-NO DEFROST 3.18

7mm Fin Spacing R1020 TEC1-7FPI-NO DEFROST 0.57R1021 TEC2-7FPI-NO DEFROST 0.89R1022 TEC3-7FPI-NO DEFROST 1.04R1023 TEC3.5-7FPI-NO DEFROST 1.25R1024 TEC4-7FPI-NO DEFROST 1.72R1025 TEC5-7FPI-NO DEFROST 2.04R1026 TEC6-7FPI-NO DEFROST 2.29R1027 TEC7-7FPI-NO DEFROST 3.02R1028 TEC8-7FPI-NO DEFROST 3.40

Specification:

Air Vol. Connections Dimensions (mm) Weight.Model Fans cu/m hr Inlet. Outlet. H W D (kg)Fin Spacing 5mm, 7mmTEC1-5FPI 1 580(5), 540(7) 3/8" 3/8" 180 525 375 7.3TEC2-5FPI 1 520(5), 490(7) 3/8" 3/8" 180 525 375 8.2TEC3-5FPI 1 580(5), 550(7) 3/8" 3/8" 180 690 375 9.8TEC3.5-5FPI 1 620(5), 590(7) 3/8" 1/2" 180 865 375 12TEC4-5FPI 2 1010(5), 950(7) 3/8" 1/2" 180 865 375 13.7TEC5-5FPI 2 1120(5), 1080(7) 3/8" 1/2" 180 1120 375 16.4TEC6-5FPI 2 1210(5), 1080(7) 1/2" 5/8" 230 1120 375 18.5TEC7-5FPI 3 1690(5), 1620(7) 1/2" 7/8" 180 1528 375 24TEC8-5FPI 3 1810(5), 1730(7) 1/2" 7/8" 230 1528 375 26.9

E/Defrost Kits (Ceiling Mounted)Code ModelR1042 T1-LTKITR1043 T2-LTKITR1044 T3-LTKITR1045 T3.5/4-LTKITR1046 T5/6-LTKITR1047 T7/8-LTKIT

E/Defrost Kits (Wall Mounted)Code ModelR1048 WT1/2-LTKITR1049 WT3-LTKITR1050 WT3.5/4-LTKITR1051 WT5-LTKITR1052 WT6-LTKITR1053 WT7/8-LTKIT

W/Mounted Drain Tray KitsCode ModelR1035 WT1/2-PANR1036 WT3-PANR1037 WT3.5/4-PANR1038 WT5-PANR1039 WT6-PANR1040 WT7-PANR1041 WT8-PAN

www.fsw.uk.com 85

Searle - KEC Unit Cooler

The GEA Searle KEC cooler is the next generation of Unit Cooler, with market leading performance,noise levels and energy efficiency. Using EC Technology as standard across the range,the Power Input for the KEC cooler is typically 50% that of other cooler motors. The KEC coolerscover a capacity range from 1.2 – 10.7kW and are ideally suited for cold room applicationsand cool cabinets. The range has a modern aesthetic design and is easy to install and maintain.

Code Fan Coil Duty - Watts

4mm Fin Spacing at SC2 (8KTD)R2020 KEC10-4MM AL NO DEFROST 1.65R2021 KEC15-4MM AL NO DEFROST 2.01R2022 KEC20-4MM AL NO DEFROST 2.35R2023 KEC25-4MM AL NO DEFROST 3.00R2024 KEC30-4MM AL NO DEFROST 3.73R2025 KEC35-4MM AL NO DEFROST 4.57R2026 KEC40-4MM AL NO DEFROST 5.84R2027 KEC45-4MM AL NO DEFROST 6.99R2028 KEC55-4MM AL NO DEFROST 8.79R2029 KEC70-4MM AL NO DEFROST 10.51

R2040 KEC10-4MM AL EL DEFROST 1.65R2041 KEC15-4MM AL EL DEFROST 2.01R2042 KEC20-4MM AL EL DEFROST 2.35R2043 KEC25-4MM AL EL DEFROST 3.00R2044 KEC30-4MM AL EL DEFROST 3.73R2045 KEC35-4MM AL EL DEFROST 4.57R2046 KEC40-4MM AL EL DEFROST 5.84R2047 KEC45-4MM AL EL DEFROST 6.99R2048 KEC55-4MM AL EL DEFROST 8.79R2049 KEC70-4MM AL EL DEFROST 10.51

6mm Fin SpacingR2060 KEC10-6MM AL NO DEFROST 1.34R2061 KEC15-6MM AL NO DEFROST 1.72R2062 KEC20-6MM AL NO DEFROST 1.99R2063 KEC25-6MM AL NO DEFROST 2.38R2064 KEC30-6MM AL NO DEFROST 3.16R2065 KEC35-6MM AL NO DEFROST 3.85R2066 KEC40-6MM AL NO DEFROST 4.63R2067 KEC45-6MM AL NO DEFROST 5.97R2068 KEC55-6MM AL NO DEFROST 7.00R2069 KEC70-6MM AL NO DEFROST 8.98

R2080 KEC10-6MM AL EL DEFROST 1.34R2081 KEC15-6MM AL EL DEFROST 1.72R2082 KEC20-6MM AL EL DEFROST 1.99R2083 KEC25-6MM AL EL DEFROST 2.38R2084 KEC30-6MM AL EL DEFROST 3.16R2085 KEC35-6MM AL EL DEFROST 3.85R2086 KEC40-6MM AL EL DEFROST 4.63R2087 KEC45-6MM AL EL DEFROST 5.97R2088 KEC55-6MM AL EL DEFROST 7.00R2089 KEC70-6MM AL EL DEFROST 8.98 The duties indicated have been calculated using R404A. For other refrigerants please contact us for the relevant correction factor.

Sales Office: 01543 437 01086

Searle - KEC Unit Cooler

Specification:Air Vol. Connections Dimensions (mm) Weight.

Model Fans cu/m hr Inlet. Outlet. H W D (kg)4mm Fin SpacingKEC10-4MM NO DE 1 0.28 1/2" 1/2" 393 726 460 27KEC15-4MM NO DE 1 0.28 1/2" 1/2" 393 726 460 28KEC20-4MM NO DE 1 0.29 1/2" 5/8" 393 876 460 33KEC25-4MM NO DE 1 0.42 1/2" 5/8" 393 876 460 33KEC30-4MM NO DE 1 0.40 1/2" 7/8" 393 876 460 35KEC35-4MM NO DE 2 0.58 1/2" 7/8" 393 1326 460 47KEC40-4MM NO DE 2 0.83 1/2" 7/8" 393 1326 460 47KEC45-4MM NO DE 2 0.81 1/2" 7/8" 393 1326 460 53KEC55-4MM NO DE 3 1.25 1/2" 7/8" 393 1826 460 67KEC70-4MM NO DE 3 1.21 1/2" 7/8" 393 1826 460 74

KEC10-4MM EL DE 1 0.28 1/2" 1/2" 393 726 460 27KEC15-4MM EL DE 1 0.28 1/2" 1/2" 393 726 460 28KEC20-4MM EL DE 1 0.29 1/2" 5/8" 393 876 460 33KEC25-4MM EL DE 1 0.42 1/2" 5/8" 393 876 460 33KEC30-4MM EL DE 1 0.40 1/2" 7/8" 393 876 460 35KEC35-4MM EL DE 2 0.58 1/2" 7/8" 393 1326 460 47KEC40-4MM EL DE 2 0.83 1/2" 7/8" 393 1326 460 47KEC45-4MM EL DE 2 0.81 1/2" 7/8" 393 1326 460 53KEC55-4MM EL DE 3 1.25 1/2" 7/8" 393 1826 460 67KEC70-4MM EL DE 3 1.21 1/2" 7/8" 393 1826 460 74

6mm Fin SpacingKEC10-6MM NO DE 1 0.31 1/2" 1/2" 393 726 460 27KEC15-6MM NO DE 1 0.31 1/2" 1/2" 393 726 460 28KEC20-6MM NO DE 1 0.32 1/2" 5/8" 393 876 460 33KEC25-6MM NO DE 1 0.43 1/2" 5/8" 393 876 460 33KEC30-6MM NO DE 1 0.42 1/2" 7/8" 393 876 460 35KEC35-6MM NO DE 2 0.63 1/2" 7/8" 393 1326 460 47KEC40-6MM NO DE 2 0.85 1/2" 7/8" 393 1326 460 47KEC45-6MM NO DE 2 0.83 1/2" 7/8" 393 1326 460 53KEC55-6MM NO DE 3 1.28 1/2" 7/8" 393 1826 460 67KEC70-6MM NO DE 3 1.25 1/2" 7/8" 393 1826 460 74

KEC10-6MM EL DE 1 0.31 1/2" 1/2" 393 726 460 27KEC15-6MM EL DE 1 0.31 1/2" 1/2" 393 726 460 28KEC20-6MM EL DE 1 0.32 1/2" 5/8" 393 876 460 33KEC25-6MM EL DE 1 0.43 1/2" 5/8" 393 876 460 33KEC30-6MM EL DE 1 0.42 1/2" 7/8" 393 876 460 35KEC35-6MM EL DE 2 0.63 1/2" 7/8" 393 1326 460 47KEC40-6MM EL DE 2 0.85 1/2" 7/8" 393 1326 460 47KEC45-6MM EL DE 2 0.83 1/2" 7/8" 393 1326 460 53KEC55-6MM EL DE 3 1.28 1/2" 7/8" 393 1826 460 67KEC70-6MM EL DE 3 1.25 1/2" 7/8" 393 1826 460 74

NO DE = No Electric Defrost, EL DE = With Electric Defrost

www.fsw.uk.com 87

Searle - KME Unit Cooler

The KMe range of coolers is ideally suited to largecold rooms and small warehouses where an efficient solution is required. The KMe can also be used for industrial food processing and agricultural applications.and cool cabinets. Standard features of the range :- 1/2” OD ‘D’ fin inner grooved copper tube, 4mm, 6mm or 8mm fin spacing, 400mm energy efficient fanset and powder coated galvanised steel case. KMe evaporators available with 3 phase fan motors on request.

Code Fan Coil Duty - Watts

4mm Fin Spacing at SC2 (8KTD)R2100 KME50-4 4AL NO DEFROST 7.36R2101 KME60-4 4AL NO DEFROST 8.70R2102 KME80-4 4AL NO DEFROST 12.21R2103 KME95-4 4AL NO DEFROST 14.78R2104 KME115-4 4AL NO DEFROST 18.41R2105 KME140-4 4AL NO DEFROST 22.29R2106 KME175-4 4AL NO DEFROST 27.924mm Fin SpacingR2120 KME50-4L 4AL EL DEFROST 7.36R2121 KME60-4L 4AL EL DEFROST 8.70R2122 KME80-4L 4AL EL DEFROST 12.21R2123 KME95-4L 4AL EL DEFROST 14.78R2124 KME115-4L 4AL EL DEFROST 18.41R2125 KME140-4L 4AL EL DEFROST 22.29R2126 KME175-4L 4AL EL DEFROST 27.92

Code Fan Coil Duty - Watts6mm Fin Spacing - No Defrost at SC2 (8KTD)R2130 KME50-6 6AL NO DEFROST 6.20R2131 KME60-6 6AL NO DEFROST 7.45R2132 KME80-6 6AL NO DEFROST 9.74R2133 KME95-6 6AL NO DEFROST 12.50R2134 KME115-6 6AL NO DEFROST 14.62R2135 KME140-6 6AL NO DEFROST 18.70R2136 KME175-6 6AL NO DEFROST 23.866mm Fin Spacing - With DefrostR2140 KME50-6L 6AL EL DEFROST 6.20R2141 KME60-6L 6AL EL DEFROST 7.45R2142 KME80-6L 6AL EL DEFROST 9.74R2143 KME95-6L 6AL EL DEFROST 12.50R2144 KME115-6L 6AL EL DEFROST 14.62R2145 KME140-6L 6AL EL DEFROST 18.70R2146 KME175-6L 6AL EL DEFROST 23.86The duties indicated have been calculated using R404A. For other refrigerants please contact us for the relevant correction factor.

KMe OptionsAerofoil fans 3PH 50Hz KMe Air StreamerAerofoil fans 3PH 60 Hz Cooler GuardKMe 400mm EC Fans Stainless Steel CasingKMe Peripheral HeaterKMe Fan Plate Heater

Sales Office: 01543 437 01088

Searle - KME Unit Cooler

Specification:Air Vol. Connections Dimensions (mm) Weight.

Model Fans cu/m hr Inlet. Outlet. H W D (kg)4mm Fin Spacing - No DefrostKME50-4 4AL 1 0.89 1/2" 1-1/8" 574 1007 540 85KME60-4 4AL 1 0.96 5/8" 1-1/8" 574 1332 540 112KME80-4 4AL 2 1.89 5/8" 1-1/8" 574 1682 540 129KME95-4 4AL 2 1.78 5/8" 1-1/8" 574 1682 540 139KME115-4 4AL 3 2.83 7/8" 1-3/8" 574 2357 708 170KME140-4 4AL 3 2.68 7/8" 1-3/8" 574 2357 708 195KME175-4 4AL 4 3.45 7/8" 1-3/8" 574 2732 708 217

4mm Fin Spacing - With DefrostKME50-4 4AL 1 0.89 1/2" 1-1/8" 574 1007 540 85KME60-4 4AL 1 0.96 5/8" 1-1/8" 574 1332 540 112KME80-4 4AL 2 1.89 5/8" 1-1/8" 574 1682 540 129KME95-4 4AL 2 1.78 5/8" 1-1/8" 574 1682 540 139KME115-4 4AL 3 2.83 7/8" 1-3/8" 574 2357 708 170KME140-4 4AL 3 2.68 7/8" 1-3/8" 574 2357 708 195KME175-4 4AL 4 3.45 7/8" 1-3/8" 574 2732 708 217

The duties indicated have been calculated using R404A. For other refrigerants please contact us for the relevant correction factor.

Specification:Air Vol. Connections Dimensions (mm) Weight.

Model Fans cu/m hr Inlet. Outlet. H W D (kg)6mm Fin Spacing - No DefrostKME50-6 6AL 1 0.98 1/2" 1-1/8" 574 1007 540 83KME60-6 6AL 1 1.01 5/8" 1-1/8" 574 1332 540 109KME80-6 6AL 2 2.00 5/8" 1-1/8" 574 1682 540 126KME95-6 6AL 2 1.95 5/8" 1-1/8" 574 1682 540 135KME115-6 6AL 3 3.00 7/8" 1-3/8" 574 2357 708 166KME140-6 6AL 3 2.93 7/8" 1-3/8" 574 2357 708 190KME175-6 6AL 4 3.86 7/8" 1-3/8" 574 2732 708 212

6mm Fin Spacing - With DefrostKME50-6L 6AL 1 0.98 1/2" 1-1/8" 574 1007 540 83KME60-6L 6AL 1 1.01 5/8" 1-1/8" 574 1332 540 109KME80-6L 6AL 2 2.00 5/8" 1-1/8" 574 1682 540 126KME95-6L 6AL 2 1.95 5/8" 1-1/8" 574 1682 540 135KME115-6L 6AL 3 3.00 7/8" 1-3/8" 574 2357 708 166KME140-6L 6AL 3 2.93 7/8" 1-3/8" 574 2357 708 190KME175-6L 6AL 4 3.86 7/8" 1-3/8" 574 2732 708 212

www.fsw.uk.com 89

Searle - JG Spares Code DescriptionR3010 Fan/Motor Assembly AllR3011 Fan Guard R3012 Drain Connection 3/4" BSP JGR3013 Gasket for Drain Connection

Searle - TEC Spares Code DescriptionR3035 Defrost Element 275W for a TEC1R3036 Defrost Element 550W for a TEC2R3037 Defrost Element 700W for a TEC3R3038 Defrost Element 900W for a TEC3.5 & 4R3039 Defrost Element 1000W for a TEC5 & 6R3040 Defrost Element 1400W for a TEC7 & 8R3045 Defrost Element 250W WT for TEC1 & 2R3046 Defrost Element 325W WT for TEC3R3047 Defrost Element 425W WT for TEC3.5 & 4R3048 Defrost Element 575W WT for TEC5R3049 Defrost Element 675W WT for TEC6R3050 Defrost Element 470W WT for TEC7 & 8R3055 Heater ClipR3056 Heater ClipR3057 Heater ClipR3060 Drain Tray Heater Guard WT1/2R3061 Drain Tray Heater Guard WT3R3062 Drain Tray Heater Guard WT3.5/4R3063 Drain Tray Heater Guard WT5/6R3064 Drain Tray Heater Guard WT7/8R3015 Drain Connection 1" BSPR3016 Drain Connection 1" BSPR3017 Gasket 1"R3012 Drain Connection 3/4" BSPR3013 Gasket 3/4"

Searle - KEC Spares Code DescriptionR3120 F/Set 300mmDIA EC 1 CORE 230V-1phR3121 F/Set 300mmDIA EC 3 CORE 230V-1phR3015 Drain Conn 1inBSPR3017 Sealing Washer FOR 1"BSP D/CONNR3125 HTR DEF 170W 115V STRT 440mm KEC10/15R3126 HTR DEF 230W 115V STRT 590mm KEC20/25/30R3127 HTR DEF 400W 115V STRT 1.08m KEC35/40/45R3128 HTR DEF 600W 115V STRT 1.54m hot L KEC55/70R3140 Coil HTR Retaining Clamp KEC Range R3141 End CoverR3135 Drain Pan - Case 400R3136 Drain Pan - Case 550R3137 Drain Pan - Case 1000R3138 Drain Pan - Case 1500

Searle - KMe Spares Code DescriptionR3150 Fanset 400mmDIA 4PL 400-3PH EBMR3151 Fanset 400mmDIA 4PL 230-1PH EBMR3015 Drain Connection (1" BSP)R3017 Drain Connection GasketR3156 MotorR3157 ImpellerR3158 Fan GuardR3160 380/465V, 3Ph, 60Hz, Aerofoil Fan SetR3162 ImpellerR3165 220/240V, 1Ph, 50/60Hz, Aerofoil Fan SetR3166 MotorR3167 ImpellerR3168 Fan GuardR3076 530W 230V U Bend for a KME50R3175 800W 230V U Bend for a KME60R3109 1060W 230V U Bend for KME80 & 95R3176 800W 115V Straight for a KME115 & 140R3177 940W 115V Straight for a KME175R3178 265W 230V Straight for a KME50R3179 400W 230V Straight for a KME60R3180 530W 230V Straight for a KME80 & 95R3181 800W 230V Straight for a KME115 & 140R3182 940W 230V Straight for a KME175R3185 Peripheral Heater 300WR3186 Peripheral Heater Kit

R3187 Fanplate Heater (Caution required due to Plastic Guard)

R3198 Anticreep clips (1 per coil heater)R3199 Defrost Termination Stat (F25)R3190 Drain Pan KMe50R3191 Drain Pan KMe60R3192 Drain Pan KMe80 / KMe95R3193 Drain Pan KMe115 / MKe140R3194 Drain Pan KMe175R3195 End Cover KMe All Models

Sales Office: 01543 437 01090

Searle - DSR Spares Code DescriptionR3200 Motor 25W, 220/240V, 1Ph, 50/60Hz, 2-Speed

(inc Capacitor)R3201 Motor 70W, 220/240V, 1Ph, 50/60Hz, Single

Speed (inc Capacitor)R3205 Fan 305mm, 5-Blades, 24° Pitch, 50Hz,

HublessR3206 Fan 305mm, 5-Blades, 20° Pitch, 60Hz,

HublessR3207 Fan 305mm, 4-Blades, 32° Pitch, 50Hz, With

HubR3208 Fan 305mm, 4-Blades, 26° Pitch, 60Hz, With

HubR3210 Defrost HRT 790W, 230V, ‘U' BendR3211 Defrost HRT 1425W, 230V, ‘U' BendR3212 Defrost HRT 2135W, 230V, ‘U' BendR3213 Defrost HRT 2850W, 230V, ‘U' BendR3213 Defrost HRT 2850W, 230V, ‘U' BendR3214 Defrost HRT 985W, 230V, Linked PairR3220 Defrost HRT Sump Heater AssemblyR3015 Defrost HRT Drain Connection 1" BSP NutR3017 Defrost HRT Drain GasketR3221 Defrost HRT Thermostat, Ranco F25-107R3222 Defrost HRT Time Switch AFR1121s, 50HzR3223 Defrost HRT Time Switch AFR4121s, 60HzR3224 Defrost HRT Thermal Cut-out (for Air Heaters)R3230 Fanplate / Draintray DSR 12, 19, 22R3231 Fanplate / Draintray DSR 36, 42R3232 Fanplate / Draintray DSR 51, 62R3233 Fanplate / Draintray DSR 68, 83, 100, 116R3235 TRIAC RVM-5E 230V 1PH 50/60Hz 4.5AR3236 TRIAC REE-50 230V 1PH 50/60hZ 5.0AR3237 Junction Box 264x214x110mm - 03752R3238 TRIAC 5A COMP WITH J/BOXR3239 Condensate Pump with remote sensorR3240 Insulated sump heater assemblyR3245 1kW Heater KitR3246 2kW Heater KitR3247 3kW Heater Kit

Searle - TG Spares Code DescriptionR3020 Motor 15W, 220/240V, 1Ph, 50/60HzR3021 Fan 230mm. 5-Blade, 31° Pitch, 50HzR3022 Fan 230mm. 5-Blade, 20° Pitch, 60HzR3014 FanguardR3025 Fan Plate / Drain Pan TG1,2R3026 Fan Plate / Drain Pan TG3R3027 Fan Plate / Drain Pan TG3-5R3028 Fan Plate / Drain Pan TG4R3029 Fan Plate / Drain Pan TG5R3030 Fan Plate / Drain Pan TG6R3031 Fan Plate / Drain Pan TG7R3032 Fan Plate / Drain Pan TG8

Searle - KS Spares Code DescriptionR3385 Motor 70W, 220/240V, 1Ph, 50/60HzR3386 Capacitor for 210-070-104 MotorR3387 Fan 305mm, 4-Blade,22°, 50/60HzR3256 Fan 310mm, 4-Blade, 36°, 50HzR3388 Fan 310mm, 4-Blade, 28°, 60HzR3389 Fan CowlR3263 Fan GuardR3390 Fan Guard Rubber washersR3015 Drain Connection (1" BSP)R3017 Drain Connection GasketR3312 575W, 220V, +U' BendR3395 650W, 220V, +U' BendR3210 790W, 220V, +U' BendR3396 1210W, 220V, +U' BendR3211 1425W, 220V, +U' BendR3212 2135W, 220V, +U' Bend R3397 1100W, 265V, +U' Bend 60HzR3399 1950W, 265V, U-Bend 60HzR3400 Heater Clips R3405 Drain Pan KS10 & KS15R3406 Drain Pan KS20R3407 Drain Pan KS25R3408 Drain Pan KS35R3409 Drain Pan KS40R3410 Drain Pan KS45R3411 Drain Pan KS55R3412 Drain Pan KS70R3413 Motor Bracket All ModelsR3414 End Panel KS25/40/45/70R3415 End Panel KS10/15/20/35/55

www.fsw.uk.com 91

Searle - KM Spares - Serial No. 7xx / 8xx / 9xx Code DescriptionR3325 Motor 200W, 220/240V-1-50/60HzR3326 Capacitor for 210-200-104 motorR3327 Motor 200W, 380/440V-3-50/60HzR3350 Fan 380mm, 4-Blade,34°, 50Hz (Front Hub)R3351 Fan 380mm, 4-Blade,24°, 60Hz (Front Hub)

R3328 Fan 380mm, 4-Blade,34°, 50Hz (Rear Hub, from serial no. 887009)

R3329 Fan 380mm, 4-Blade,24°, 60Hz (Rear Hub, from serial no. 887009)

R3281 Fan GuardR3355 Coil HTR 330W, 110V, Straight KM50R3356 Coil HTR 500W, 110V, Straight KM60R3357 Coil HTR 665W, 110V, Straight KM80 & KM95

R3358 Coil HTR 1000W, 110V, Straight KM115 & KM140

R3359 Coil HTR 1165W, 110V, Straight KM175R3365 Drain Pan HTR165W, 110V, Straight KM50R3366 Drain Pan HTR250W, 110V, Straight KM60

R3367 Drain Pan HTR335W, 110V, Straight KM80 & KM95

R3368 Drain Pan HTR500W, 110V, Straight KM115 & KM140

R3369 Drain Pan HTR585W, 110V, Straight KM175R3400 Heater ClipsR3081 Heater Clips (anti-creep)R3377 End PanelR3378 End PanelR3379 Air Straightener

Searle - KM Spares Code DescriptionR3325 Motor 200W, 220/240V-1-50/60HzR3326 Capacitor for 210-200-104 motorR3327 Motor 200W, 380/440V-3-50/60Hz

R3328 Fan 380mm, 4-Blade,34°, 50Hz (Rear Hub, from serial no. 887009)

R3329 Fan 380mm, 4-Blade,24°, 60Hz (Rear Hub, from serial no. 887009)

R3330 Plastic Fan GuardR3015 Drain Connection (1" BSP)R3017 Drain Connection Gasket

Axial Fan Set 26°Pitch, 415V, 3Ph, 50HzR3156 MotorR3157 ImpellerR3158 Fan GuardR3160 380/465V, 3Ph, 60Hz, Aerofoil Fan SetR3162 ImpellerR3165 220/240V, 1Ph, 50/60Hz, Aerofoil Fan SetR3166 MotorR3167 ImpellerR3168 Fan GuardR3076 Coil HTR 530W 230V U BendR3175 Coil HTR 800W 230V U BendR3109 Coil HTR 1060W 230V U BendR3176 Coil HTR 800W 115V StraightR3177 Coil HTR 940W 115V StraightR3178 Draintray HTR 265W 230V StraightR3179 Draintray HTR 400W 230V StraightR3180 Draintray HTR 530W 230V StraightR3181 Draintray HTR 800W 230V StraightR3182 Draintray HTR 940W 230V StraightR3185 Peripheral Heater 300WR3186 Peripheral Heater Kit

R3187 Fanplate Heater (Caution required due to Plastic Guard)

R3198 Anticreep clips (1 per coil heater)R3199 Defrost Termination Stat (F25)R3335 Drain Pan KM50R3336 Drain Pan KM60R3337 Drain Pan KM80R3338 Drain Pan KM95R3339 Drain Pan KM115R3340 Drain Pan KM140R3341 Drain Pan KM175

R3345 Motor Bracket ( from serial no. 123679) (2 required per motor)

R3346 Motor Bracket (up to serial no. 123678)R3347 End panel (All KM except KM80 & KM115R3348 End panel (KM80 and KM115)

Sales Office: 01543 437 01092

LU-VE SHP Ceiling Mount Panel Coolers

The SHP coolers have been designed for reach-in cabinets. The range consists of two models with nominalcapacities of 470 and 580 watts. The coolers are suitable for operating temperature of between -21°C and+15°C. The casings are easily removed to provide easy access for installation, service and cleaning.

For room temperatures below +2°C electric defrost models must be used.

4.3 mm Fin Spacing.Code Model Duty - Watts Duty - WattsHigh Temperature at SC 2 (8KTD) at SC 3 (7KTD)R100 SHP6N 352 -R102 SHP9N 435 -

Electric DefrostR104 SHP6E - 258R106 SHP9E - 319

LU-VE SHS Ceiling Mount Panel Coolers

The SHS coolers have been designed for small cold rooms and reach-in cabinets. The range consists of eight models covering nominal capacities between 700 and 2290 watts.The SHS coolers utilise LU’VE’s super efficient Turbocoil2 coils. The coolers are low noise with the addedbenefit of low energy consumption.

The coolers are suitable for operating temperature of between -21°C and +15°C. The casings are easily removed to provide easy access for installation, service and cleaning.

For room temperatures below + 2°C electric defrost models must be used.

5.0 mm Fin Spacing.Code Model Duty - WattsHigh Temperature at SC 2 (8KTD) at SC 3 (7KTD)R110 SHS 8N 518 -R111 SHS12N 577 -R112 SHS13N 703 -R113 SHS15N 770 -R114 SHS18N 1058 -R115 SHS22N 1162 -R116 SHS26N 1517 -R117 SHS32N 1695 -

Electric Defrost at SC 2 (8KTD) at SC 3 (7KTD)R120 SHS 8E - 385R121 SHS12E - 429R122 SHS13E - 523R123 SHS15E - 572R124 SHS18E - 787R125 SHS22E - 864R126 SHS26E - 1128R127 SHS32E - 1260

The above duties will need correcting to the actual temperature difference.The duties indicted have been calculated using R404A. for other refrigerants pleaseContact us for the relevant correction factor. Please see facing page for application notes.

www.fsw.uk.com 93

LU-VE SHF Compact Coolers

The SHF coolers have been designed for refrigerated cabinets.

5.5 mm Fin Spacing.Code Model Duty - Watts Duty - WattsHigh Temperature at SC 2 (8KTD) at SC 3 (7KTD)R700 SHF 50S 388 -R701 SHF 60S 462 -R702 SHF 70S 536 -R703 SHF 55D 454 -R704 SHF 65D 520 -

Electric DefrostR710 SHF 50SE - 294R711 SHF 60SE - 350R712 SHF 70SE - 406R713 SHF 55DE - 344R714 SHF 65DE - 394

Specification:Air Vol. No of Air Defrost Dimensions (mm) Motor Connections Weight

Model cu.m/hr Fans Throw Watts * A B Amps In Out Kg4.3mm Fin Spacing (154mm Blades)SHP6 220 1 3.0 M 270 390 315 0.26 8 mm 8 mm 2.7SHP9 200 1 3.0 M 270 390 315 0.26 8 mm 8 mm 2.95.0mm Fin Spacing (230mm Blades)SHS 8 440 1 - 335 493 374 0.22 3/8 3/8 5.1SHS12 440 1 - 335 493 374 0.22 3/8 3/8 5.2SHS13 500 1 - 460 647 524 0.22 3/8 3/8 6.1SHS15 500 1 - 460 647 524 0.22 3/8 3/8 6.2SHS18 850 2 - 585 803 674 0.22 3/8 3/8 8.6SHS22 850 2 - 585 803 674 0.30 3/8 3/8 8.7SHS26 980 2 - 825 1126 974 0.30 3/8 3/8 10.8SHS32 1250 3 - 825 1126 974 0.30 3/8 3/8 12.35.5mm Fin Spacing (154mm Blades)SHF 50S 240 1 3.1 M 330 382 350 0.26 8 mm 8 mm 3.9SHF 60S 265 1 3.4 M 450 472 440 0.26 8 mm 8 mm 4.6SHF 70S 345 2 2.9 M 450 472 440 0.52 8 mm 8 mm 5.6SHF 55D 310 2 2 x 2.0 M 330 382 350 0.52 8 mm 8 mm 4.7SHF 65D 325 2 2 x 2.2 M 450 472 440 0.52 8 mm 8 mm 5.6

Standard Conditions:Condition Air Inlet Temperature Evaporating Temperature Standard TD

SC 2 0°C -8°C 8KSC 3 -18°C -25°C 7K

Sales Office: 01543 437 01094

LU-VE SHA Panel Coolers

The SHA angled coolers have been designed for small cold rooms.

3.1 mm Fin Spacing.Code Model Duty - Watts Duty - WattsHigh Temperature at SC 2 (8KTD) at SC 3 (7KTD)R200 SHA 30-32 1295 -R201 SHA 40-32 1628 -R202 SHA 60-32 2664 -R203 SHA 80-32 3256 -R204 SHA120-32 4995 -R205 SHA160-32 6586 -

Electric DefrostR210 SHA 30-32 - 962R211 SHA 40-32 - 1210R212 SHA 60-32 - 1980R213 SHA 80-32 - 2420R214 SHA120-32 - 3712R215 SHA160-32 - 4895

4.8 mm Fin Spacing.High Temperature at SC 2 (8KTD) at SC 3 (7KTD)R220 SHA 21-50 1073 -R221 SHA 27-50 1369 -R222 SHA 41-50 2220 -R223 SHA 53-50 2738 -R224 SHA 79-50 4255 -R225 SHA106-50 5661 -

Electric Defrost at SC 2 (8KTD) at SC 3 (7KTD)R230 SHA 21-50E - 797R231 SHA 27-50E - 1017R232 SHA 41-50E - 1650R233 SHA 53-50E - 2035R234 SHA 79-50E - 3162R235 SHA106-50E - 4207

7.7 mm Fin Spacing.High Temperature at SC 2 (8KTD) at SC 3 (7KTD)R240 SHA 14-80 814 -R241 SHA 17-80 1036 -R242 SHA 28-80 1702 -R243 SHA 35-80 2072 -R244 SHA 52-80 3219 -R245 SHA 70-80 4366 -

Electric Defrost at SC 2 (8KTD) at SC 3 (7KTD)R250 SHA 14-80E - 605R251 SHA 17-80E - 770R252 SHA 28-80E - 1265R253 SHA 35-80E - 1540R254 SHA 52-80E - 2392R255 SHA 70-80E - 3245

The above duties will need correcting to the actual temperature difference.The duties indicted have been calculated using R404A. for other refrigerants pleaseContact us for the relevant correction factor. Please see facing page for application notes.

www.fsw.uk.com 95

LU-VE SHA Unit Coolers

Specification:Air Vol. No of Air Defrost Dimensions (mm) Motor Connections Weight

Model cu.m/hr Fans Throw Watts * A B Amps In Out Kg3.1mm Fin Spacing (275mm Blades)SHA 30-32 550 1 8 M 500 605 293 0.62 10 mm 10 mm 9.5SHA 40-32 650 1 8 M 650 730 418 0.62 12 mm 22 mm 11.5SHA 60-32 1100 2 9 M 900 930 618 0.62 12 mm 22 mm 16.5SHA 80-32 1300 2 9 M 1200 1180 868 0.64 12 mm 28 mm 20.5SHA120-32 1950 3 10 M 1750 1630 1318 0.64 12 mm 28 mm 29.5SHA160-32 2600 4 11 M 2300 2080 1768 0.64 12 mm 28 mm 39.04.8mm Fin Spacing (275mm Blades)SHA 21-50 600 1 9 M 500 605 293 0.62 10 mm 10 mm 9.0SHA 27-50 720 1 9 M 650 730 418 0.62 12 mm 22 mm 10.5SHA 41-50 1200 2 10 M 900 930 618 0.62 12 mm 22 mm 15.5SHA 53-50 1440 2 10 M 1200 1180 868 0.64 12 mm 28 mm 19.0SHA 79-50 2160 3 11 M 1750 1630 1318 0.64 12 mm 28 mm 27.5SHA106-50 2880 4 12 M 2300 2080 1768 0.64 12 mm 28 mm 36.07.7mm Fin Spacing (275mm Blades)SHA 14-80 670 1 10 M 500 605 293 0.62 10 mm 10 mm 8.5SHA 17-80 750 1 10 M 650 730 418 0.62 12 mm 22 mm 10.0SHA 28-80 1340 2 11 M 900 930 618 0.62 12 mm 22 mm 15.0SHA 35-80 1500 2 11 M 1200 1180 868 0.64 12 mm 28 mm 18.0SHA 52-80 2250 3 12 M 1750 1630 1318 0.64 12 mm 28 mm 26.0SHA 70-80 3000 4 13 M 2300 2080 1768 0.64 12 mm 28 mm 34.0

Standard Conditions:Condition Air Inlet Temperature Evaporating Temperature Standard TD

SC 2 0°C -8°C 8KSC 3 -18°C -25°C 7K

Sales Office: 01543 437 01096

LU-VE F27HC Unit Coolers

4.5 mm Fin Spacing.Code Model Duty - Watts Duty - WattsHigh Temperature at SC 2 (8KTD) at SC 3 (7KTD)R300 F27HC 25-4N 1332 -R301 F27HC 36-4N 1739 -R302 F27HC 49-4N 2812 -R303 F27HC 71-4N 3515 -R304 F27HC107-4N 5328 -R305 F27HC142-4N 6956 -

Electric DefrostR310 F27HC 25-4E - 990R311 F27HC 36-4E - 1292R312 F27HC 49-4E - 2090R313 F27HC 71-4E - 2612R314 F27HC107-4E - 3960R315 F27HC142-4E - 5170

6.3 mm Fin Spacing.High Temperature at SC 2 (8KTD) at SC 3 (7KTD)R320 F27HC 19-6N 1184 -R321 F27HC 28-6N 1517 -R322 F27HC 38-6N 2442 -R323 F27HC 55-6N 3071 -R324 F27HC 85-6N 4662 -R325 F27HC110-6N 6142 -

Electric Defrost at SC 2 (8KTD) at SC 3 (7KTD)R330 F27HC 19-6E - 880R331 F27HC 28-6E - 1127R332 F27HC 38-6E - 1815R333 F27HC 55-6E - 2282R334 F27HC 85-6E - 3465R335 F27HC110-6E - 4565

7.0 mm Fin Spacing.High Temperature at SC 2 (8KTD) at SC 3 (7KTD)R340 F27HC 16-7N 1036 -R341 F27HC 23-7N 1332 -R342 F27HC 31-7N 2146 -R343 F27HC 46-7N 2664 -R344 F27HC 70-7N 4107 -R345 F27HC 92-7N 5476 -

Electric Defrost at SC 2 (8KTD) at SC 3 (7KTD)R350 F27HC 16-7E - 770R351 F27HC 23-7E - 990R352 F27HC 31-7E - 1595R353 F27HC 46-7E - 1980R354 F27HC 70-7E - 3052R355 F27HC 92-7E - 4070 The above duties will need correcting to the actual temperature difference.The duties indicted have been calculated using R404A. for other refrigerants pleaseContact us for the relevant correction factor. Please see facing page for application notes.

www.fsw.uk.com 97

LU-VE F27HC Unit Coolers

Specification:Air Vol. No of Air Defrost Dimensions (mm) Motor Connections Weight

Model cu.m/hr Fans Throw Watts * Wid Hei Amps In Out Kg

4.5mm Fin Spacing (275mm Blades)

F27HC 25-4N 900 1 10.5 M 1220 678 415 0.6 3/8 3/8 12F27HC 36-4N 900 1 10.5 M 1220 678 415 0.6 1/2 7/8 13F27HC 49-4N 1800 2 12.5 M 2160 1048 415 1.2 1/2 7/8 19F27HC 71-4N 1800 2 12.5 M 2160 1048 415 1.2 1/2 1-1/8 21F27HC107-4N 2750 3 14.0 M 3080 1418 415 1.8 1/2 1-1/8 28F27HC142-4N 3600 4 15.5 M 4000 1788 415 2.4 1/2 1-1/8 36

6.0mm Fin Spacing (275mm Blades)

F27HC 19-6N 1000 1 11.0 M 1220 678 415 0.6 3/8 3/8 11F27HC 28-6N 1000 1 11.0 M 1220 678 415 0.6 1/2 7/8 12F27HC 38-6N 2000 2 13.0 M 2160 1048 415 1.2 1/2 7/8 18F27HC 55-6N 2000 2 13.0 M 2160 1048 415 1.2 1/2 1-1/8 20F27HC 85-6N 3000 3 14.5 M 3080 1418 415 1.8 1/2 1-1/8 27F27HC110-6N 4000 4 16.0 M 3080 1788 415 2.4 1/2 1-1/8 34

7.0mm Fin Spacing (275mm Blades)

F27HC 16-7N 1000 1 11.5 M 1220 678 415 0.6 3/8 3/8 10F27HC 23-7N 1000 1 11.5 M 1220 678 415 0.6 1/2 7/8 11F27HC 31-7N 2000 1 13.5 M 2160 1048 415 1.2 1/2 7/8 17F27HC 46-7N 2000 2 13.5 M 2160 1048 415 1.2 1/2 1-1/8 19F27HC 70-7N 3000 2 15.5 M 3080 1418 415 1.8 1/2 1-1/8 26F27HC 92-7N 4000 3 17.0 M 3080 1788 415 2.4 1/2 1-1/8 32

Standard Conditions:Condition Air Inlet Temperature Evaporating Temperature Standard TD

SC 2 0°C -8°C 8KSC 3 -18°C -25°C 7K

Sales Office: 01543 437 01098

LU-VE F35HC Unit Coolers

4.5 mm Fin Spacing.Code Model Duty - Watts Duty - WattsHigh Temperature at SC 2 (8KTD) at SC 3 (7KTD)R400 F35HC 73-4N 3959 -R401 F35HC106-4N 4958 -R402 F35HC133-4N 5920 -R403 F35HC145-4N 7992 -R404 F35HC215-4N 9990 -R405 F35HC272-4N 13653 -R406 F35HC323-4N 14948 -R407 F35HC362-4N 18352 -R408 F35HC430-4N 20128 -Electric DefrostR410 F35HC 73-4E - 2942R411 F35HC106-4E - 3685R412 F35HC133-4E - 4400R413 F35HC145-4E - 5940R414 F35HC215-4E - 7425R415 F35HC272-4E - 10147R416 F35HC323-4E - 11110R417 F35HC362-4E - 13640R418 F35HC430-4E - 14960

6.0 mm Fin Spacing.High Temperature at SC 2 (8KTD) at SC 3 (7KTD)R420 F35HC 59-6N 3330 -R421 F35HC 84-6N 4366 -R422 F35HC108-6N 5254 -R423 F35HC117-6N 6808 -R424 F35HC174-6N 8843 -R425 F35HC218-6N 11914 -R426 F35HC261-6N 13320 -R427 F35HC290-6N 15910 -R428 F35HC348-6N 17760 -Electric DefrostR430 F35HC 59-6E - 2475R431 F35HC 84-6E - 3245R432 F35HC108-6E - 3905R433 F35HC117-6E - 5060R434 F35HC174-6E - 6572R435 F35HC218-6E - 8855R436 F35HC261-6E - 9900R437 F35HC290-6E - 11825R438 F35HC348-6E - 13200

The above duties will need correcting to the actual temperature difference.The duties indicted have been calculated using R404A. for other refrigerants pleasecontact us for the relevant correction factor. Please see facing page for application notes.

Standard Conditions:Condition Air Inlet Temperature Evaporating Temperature Standard TD

SC 2 0°C -8°C 8KSC 3 -18°C -25°C 7K

www.fsw.uk.com 99

LU-VE F35HC Unit Coolers7.0 mm Fin Spacing.High Temperature at SC 2 (8KTD) at SC 3 (7KTD)R440 F35HC 47-7N 2886 -R441 F35HC 69-7N 3848 -R442 F35HC 86-7N 4662 -R443 F35HC 94-7N 5883 -R444 F35HC143-7N 7881 -R445 F35HC179-7N 10471 -R446 F35HC213-7N 11840 -R447 F35HC238-7N 13320 -R448 F35HC284-7N 15762 -

Electric Defrost at SC 2 (8KTD) at SC 3 (7KTD)R450 F35HC 47-7E - 2145R451 F35HC 69-7E - 2860R452 F35HC 86-7E - 346NR453 F35HC 94-7E - 4372R454 F35HC143-7E - 5857R455 F35HC179-7E - 7782R456 F35HC213-7E - 87N0R457 F35HC238-7E - 9900R458 F35HC284-7E - 11715

Air Vol. No of Air Defrost Dimensions (mm) Motor Connections WeightModel cu.m/hr Fans Throw Watts * Wid Hei Amps Liq Suct. Kg

4.5mm Fin Spacing (350mm Blades)

F35HC 73-4N 2600 1 19.5 M 2075 865 415 0.8 1/2 1-1/8 27F35HC106-4N 2400 1 18.0 M 2975 865 415 0.8 1/2 1-1/8 32F35HC145-4N 5200 2 23.0 M 3680 1420 415 1.6 1/2 1-1/8 44F35HC215-4N 4800 2 22.0 M 5280 1420 415 1.6 5/8 1-1/8 51F35HC272-4N 7450 3 26.0 M 7620 1975 415 2.4 5/8 1-3/8 65F35HC323-4N 7200 3 25.0 M 7620 1975 415 2.4 5/8 1-3/8 71F35HC362-4N 9950 4 30.0 M 9940 2530 415 3.2 5/8 1-5/8 86F35HC430-4N 9600 4 29.0 M 9940 2530 415 3.2 7/8 1-5/8 93

6.0mm Fin Spacing (350mm Blades)

F35HC 59-6N 2650 1 20.0 M 2075 865 415 0.8 1/2 1-1/8 26F35HC 84-6N 2500 1 18.5 M 2975 865 415 0.8 1/2 1-1/8 31F35HC117-6N 5300 2 23.5 M 3680 1420 415 1.6 1/2 1-1/8 42F35HC174-6N 5000 2 22.5 M 5280 1420 415 1.6 5/8 1-1/8 49F35HC218-6N 7700 3 26.5 M 7620 1975 415 2.4 5/8 1-3/8 62F35HC261-6N 7500 3 25.5 M 7620 1975 415 2.4 5/8 1-3/8 67F35HC290-6N 10300 4 30.5 M 9940 2530 415 3.2 5/8 1-5/8 82F35HC348-6N 10000 4 29.5 M 9940 2530 415 3.2 7/8 1-5/8 88

7.0mm Fin Spacing (350mm Blades)

F35HC 47-7N 2700 1 20.5 M 2780 865 415 0.8 1/2 1-1/8 25F35HC 69-7N 2600 1 19.0 M 3730 865 415 0.8 1/2 1-1/8 30F35HC 94-7N 5400 2 24.0 M 4880 1420 415 1.6 1/2 1-1/8 41F35HC143-7N 5200 2 23.0 M 6550 1420 415 1.6 5/8 1-1/8 47F35HC179-7N 7950 3 27.0 M 9490 1975 415 2.4 5/8 1-3/8 60F35HC213-7N 7800 3 26.0 M 9490 1975 415 2.4 5/8 1-3/8 65F35HC238-7N 10600 4 31.0 M 12370 2530 415 3.2 5/8 1-5/8 79F35HC284-7N 10400 4 30.0 M 12370 2530 2262 3.2 7/8 1-5/8 85

Sales Office: 01543 437 010100

LU-VE FHD Dual Discharge Coolers - Cold Rooms and Food Prep Area Capacity @ Eurovent SC2

3.0 mm Fin Spacing.Code Model Duty - Watts Duty - WattsHigh Temperature High Fan Speed Low Fan SpeedR800 FHD 711-3 2800 2470R801 FHD 712-3 3940 3350R802 FHD 721-3 5630 4970R803 FHD 722-3 7910 6730R804 FHD 732-3 11700 10050R805 FHD 742-3 14570 12730

Electric DefrostR810 FHD 711-3 2800 2470R811 FHD 712-3 3940 3350R812 FHD 721-3 5630 4970R813 FHD 722-3 7910 6730R814 FHD 732-3 11700 10050R815 FHD 742-3 14570 12730

4.5 mm Fin Spacing.High TemperatureR820 FHD 811-4 2280 2020R821 FHD 812-4 3350 2940R822 FHD 821-4 4560 4050R823 FHD 822-4 6700 5850R824 FHD 832-4 10120 8870R825 FHD 842-4 12990 11480

Electric DefrostR830 FHD 811-4 2280 2020R831 FHD 812-4 3350 2940R832 FHD 821-4 4560 4050R833 FHD 822-4 6700 5850R834 FHD 832-4 10120 8870R835 FHD 842-4 12990 11480

7.0 mm Fin Spacing.High TemperatureR840 FHD 911-7 1620 1470R841 FHD 912-7 2540 2240R842 FHD 921-7 3240 2940R843 FHD 922-7 5040 4490R844 FHD 932-7 7760 6880R845 FHD 942-7 10230 9130

Electric DefrostR850 FHD 911-7 1620 1470R851 FHD 912-7 2540 2240R852 FHD 921-7 3240 2940R853 FHD 922-7 5040 4490R854 FHD 932-7 7760 6880R855 FHD 942-7 10230 9130

For application notes please see facing page.

www.fsw.uk.com 101

LU-VE FHD Dual Discharge Coolers

Specification:Air Vol. No of Air Defrost Dimensions (mm) Motor Connections Weight

Model cu.m/hr Fans Throw Watts * A B Amps Liq Suct. Kg3.0.mm Fin Spacing FHD 711-3 1800 1 8-11m 1800 888 596 0.7 1/2 7/8 23FHD 712-3 1800 1 8-11m 1800 888 596 0.7 1/2 1-1/8 24FHD 721-3 3600 2 10-11m 3200 1443 1151 1.4 1/2 1-1/8 26FHD 722-3 3600 2 10-11m 3200 1443 1151 1.4 5/8 1-3/8 39FHD 732-3 5400 3 11-14m 4700 1998 1706 2.1 5/8 1-3/8 58FHD 743-3 7200 4 11-15m 6200 2553 2261 2.8 5/8 1-3/8 76

4.5mm Fin SpacingFHD 811-4 1800 1 9-11m 1800 888 596 0.7 1/2 7/8 21FHD 812-4 1800 1 9-11m 1800 888 596 0.7 1/2 1-1/8 23FHD 821-4 3600 2 10-13m 3200 1443 1151 1.4 1/2 1-1/8 35FHD 822-4 3600 2 10-13m 3200 1443 1151 1.4 5/8 1-3/8 38FHD 832-4 5400 3 11-14m 4700 1998 1706 2.1 5/8 1-3/8 53FHD 843-4 7200 4 12-15m 6200 2553 2261 2.8 5/8 1-3/8 69

7.0mm Fin SpacingFHD 911-7 1800 1 9-12m 1800 888 596 0.7 1/2 7/8 19FHD 912-7 1800 1 9-12m 1800 888 596 0.7 1/2 1-1/8 21FHD 921-7 3600 2 10-14m 3200 1443 1151 1.4 1/2 1-1/8 32FHD 922-7 3600 2 10-14m 3200 1443 1151 1.4 5/8 1-3/8 35FHD 932-7 5400 3 12-15m 4700 1998 1706 2.1 5/8 1-3/8 49FHD 943-7 7200 4 13-16m 6200 2553 2261 2.8 5/8 1-3/8 62

Sales Office: 01543 437 010102

LU-VE SHDS Dual Discharge Coolers Low air velocity and noise suitable for labs & prep rooms

3.1 mm Fin Spacing.Code Model Duty - Watts Duty - WattsHigh Temperature at SC 2 (8KTD) at SC 3 (7KTD)R500 SHDS 52-32 2442 -R501 SHDS 74-32 2812 -R502 SHDS114-32 3774 -R503 SHDS146-32 5624 -R504 SHDS221-32 8621 -R505 SHDS294-32 11396 -R506 SHDS368-32 13764 -

Electric DefrostR510 SHDS 52-32E - 2442R511 SHDS 74-32E - 2812R512 SHDS114-32E - 3774R513 SHDS146-32E - 5624R514 SHDS221-32E - 8621R515 SHDS294-32E - 11396R516 SHDS368-32E - 13764

4.8 mm Fin Spacing.High Temperature at SC 2 (8KTD) at SC 3 (7KTD)R520 SHDS 34-50 1998 -R521 SHDS 49-50 2405 -R522 SHDS 73-50 3293 -R523 SHDS 98-50 4847 -R524 SHDS148-50 7474 -R525 SHDS196-50 9990 -R526 SHDS245-50 12210 -

Electric Defrost at SC 2 (8KTD) at SC 3 (7KTD)R530 SHDS 34-50E - 1485R531 SHDS 49-50E - 1788R532 SHDS 73-50E - 2448R533 SHDS 98-50E - 3603R534 SHDS148-50E - 5555R535 SHDS196-50E - 7425R536 SHDS245-50E - 9075

7.7 mm Fin Spacing.High Temperature at SC 2 (8KTD) at SC 3 (7KTD)R540 SHDS 21-80 1443 -R541 SHDS 31-80 1813 -R542 SHDS 46-80 2516 -R543 SHDS 62-80 3663 -R544 SHDS 93-80 5698 -R545 SHDS124-80 7696 -R546 SHDS155-80 9620 -

Electric Defrost at SC 2 (8KTD) at SC 3 (7KTD)R550 SHDS 21-80E - 1073R551 SHDS 31-80E - 1348R552 SHDS 46-80E - 1870R553 SHDS 62-80E - 2723R554 SHDS 93-80E - 4235R555 SHDS124-80E - 5720R556 SHDS155-80E - 7150

For application notes please see facing page.

www.fsw.uk.com 103

LU-VE SHDS Dual Discharge Coolers

Specification:Air Vol. No of Air Throw Defrost Dimensions (mm) Motor Connections Weight

Model cu.m/hr Fans Metres Watts * A B Amps In Out Kg3.1mm Fin Spacing (330mm Blades)SHDS 52-32 1150 1 6 1300 740 485 0.31 1/2 7/8 21.0SHDS 74-32 1150 1 6 1300 740 485 0.31 1/2 1-1/8 22.0SHDS114-32 1350 1 5 2000 1040 785 0.31 1/2 1-1/8 26.0SHDS146-32 2300 2 7 2400 1190 935 0.62 5/8 1-3/8 37.5SHDS221-32 3450 3 8 3540 1640 1385 0.93 5/8 1-3/8 53.0SHDS294-32 4600 4 8.5 4760 2090 1835 1.24 5/8 1-3/8 68.5SHDS368-32 5750 5 9 5800 2540 2285 1.55 5/8 1-3/8 84.04.8mm Fin Spacing (330mm Blades)SHDS 34-50 1300 1 7 1300 740 485 0.31 1/2 7/8 21.0SHDS 49-50 1300 1 7 1300 740 485 0.31 1/2 1-1/8 22.0SHDS 73-50 1450 1 5.5 2000 1040 785 0.31 1/2 1-1/8 26.0SHDS 98-50 2600 2 8 2400 1190 935 0.62 5/8 1-3/8 37.5SHDS148-50 3900 3 9 3540 1640 1385 0.93 5/8 1-3/8 53.0SHDS196-50 5200 4 9.5 4760 2090 1835 1.24 5/8 1-3/8 68.5SHDS245-50 6500 5 10 5800 2540 2285 1.55 5/8 1-3/8 84.07.7mm Fin Spacing (330mm Blades)SHDS 21-80 1400 1 8 1300 740 485 0.31 1/2 7/8 21.0SHDS 31-80 1400 1 8 1300 740 485 0.31 1/2 1-1/8 22.0SHDS 46-80 1500 1 6 2000 1040 785 0.31 1/2 1-1/8 26.0SHDS 62-80 2800 2 9 2400 1190 935 0.62 5/8 1-3/8 37.5SHDS 93-80 4200 3 10 3540 1640 1385 0.93 5/8 1-3/8 53.0SHDS124-80 5600 4 10.5 4760 2090 1835 1.24 5/8 1-3/8 68.5SHDS155-80 7000 5 11 5800 2540 2285 1.55 5/8 1-3/8 84.0

* Air Throw is side distribution therefore 2 x given figure i.e. SHDS52-32 = 2 x 6M (12M)

Standard Conditions:Condition Air Inlet Temperature Evaporating Temperature Standard TD

SC 2 0°C -8°C 8KSC 3 -18°C -25°C 7K

Sales Office: 01543 437 010104

Commercial Cubic Cooler Spares – Production Models

Code Description Type Code To SuitR910 Fan Motor W26 A S2HC R911 Fan Guard S2HC R912 Fan Mounting Brackets S2HC R913 Side Panel S2HC R920 Coil Heaters SHC 01 S2HC 25-19-16R921 Coil Heaters SHC 01 S2HC 36-28-23R922 Coil Heaters SHC 02 S2HC 49-38-31R923 Coil Heaters SHC 02 S2HC 71-55-46R924 Coil Heaters SHC 03 S2HC 107-85-70R925 Coil Heaters SHC 04 S2HC 142-110-92R926 Heater Clips S2HC

R930 Fan Motor up to Feb02 V350 A S3HCCapacitor is mounted in electrics box

R931 Fan Motor from Feb02 V350 B S3HCCapacitor is mounted on the motor

R932 Fan Guard S3HCR933 Fan Mounting Brackets S3HCR934 Fan Motor Capacitor 6.3 MFD S3HCR935 Side Panel S3HCR940 Coil Heaters SHC 11 S3HC 73-59-47R941 Drain Tray Heater S3HC 73-59-47R942 Coil Heaters SHC 11 S3HC 106-84-69R943 Drain Tray Heater S3HC 106-84-69R944 Coil Heaters SHC 15 S3HC 133-108-86R945 Drain Tray Heater S3HC 133-108-86R946 Coil Heaters SHC 12 S3HC 145-117-94R947 Drain Tray Heater S3HC 145-117-94R948 Coil Heaters SHC 12 S3HC 215-174-143R949 Drain Tray Heater S3HC 215-174-143R950 Coil Heaters SHC 13 S3HC 272-218-179R951 Drain Tray Heater S3HC 272-218-179R952 Coil Heaters SHC 13 S3HC 323-261-213R953 Drain Tray Heater S3HC 323-261-213R954 Coil Heaters SHC 14 S3HC 362-290-238R955 Drain Tray Heater S3HC 362-290-238R956 Coil Heaters SHC 14 S3HC 430-348-284R957 Drain Tray Heater S3HC 430-348-284

Commercial Panel Cooler Spares – Production Models

Code Description Type Code To SuitR959 Heater Clips SHAR960 Fan Motor W26 SHAR961 Fan Guard SHAR962 Fan Guard SHA 60-32/ 41-50/ 28-80R965 Coil Heaters KIT DE12 SHA 30-41-14R966 Coil Heaters KIT DE 6 SHA 40-27-17R967 Coil Heaters KIT DE13 SHA 60-41-28R968 Coil Heaters KIT DE 8 SHA 80-53-35R969 Coil Heaters KIT DE 9 SHA 120-79-52R970 Coil Heaters KIT DE10 SHA 160-106-70R971 Inspection Cover SHA

www.fsw.uk.com 105

Commercial Panel Cooler Spares – Production Models

Code Description Type Code To SuitR973 Coil Heaters RCE 051 SHPR974 Coil Heaters RCE 061 SHP 11/19R975 Fan Motor W5/2 SHPR976 Fan Motor W4 SHP 11/19R978 Coil Heaters RCE 021 SHS 8 & 12R979 Coil Heaters RCE 022 SHS 13 & 15R980 Coil Heaters RCE 023 SHS 18 & 22R981 Coil Heaters Kit RCE 024 SHS 26 & 32R982 Fan Guard SHSR983 Heater Clips SHS 26 & 32R984 Inspection Cover SHSR985 Coil Heaters RAB 13 SHF 50S/55DR986 Coil Heaters RAB 14 SHF 60S/65D/70D

Out of Production Models

Code Description Type Code To SuitR987 Fan Motor V 330 / A HC & NHCR988 Fan Motor V 330 4P HDN R989 Fan Motor V 330 6P HDSR990 Fan Motor W 26 HAR991 Fan Motor W 26 HA49-1:36-2:26-5R992 Fan Motor W 8 HSR993 Fan Motor W5/2 HP