Platform• Large, elevated platform
that is isolated from the tractor chassis
• Completely flat foot deck with thick rubber cover
• Entry from both sides of the tractor
• Folding ROPS for access to height-restricted areas
• Suspended vinyl seat and adjustable steering wheel
• Digital and analog front dash display
• Clear plastic front mud guards
• Sun canopy is standard equipment
Engine• Powerful 4-cylinder
BETAPOWER diesel engine
• High, sustained torque at low engine RPM to get work done
• Advanced SCR emissions technology is simple and reliable
• Turbocharged and intercooled with electronic engine management
• Single piece raising hood for full access to engine
• Easy servicing of engine oil, air filter and battery
• Large 47-gallon fuel tank under platform
Transmission• 12x12 main gear box with
4 gears and 3 ranges• Up to 25 mph (40 kph)
transport speed• Synchronized mechanical
shuttle with dry disc clutch for simplicity
• Availabe hydraulic power shuttle with durable wet multi-disc clutch
• 3-speed power shift for shift-under-load performance
• Available creeper• Planetary reduction rear
axle final drives• Push button differential
lock on front AND rear axles for traction
Front Axle• Robust 4wd front axle is
standard equipment• Heavy duty cast steel
4wd axle housing with center differential
• Outboard planetary final drives for durability
• Simple push-button 4wd engagement
• Automatic 4-wheel braking for safety
• Fully locking center differential engages with the rear axle
• Hydrostatic power steering with 55 degree steering angle
• Radial tires for better all-around performance
Hydraulics & PTO• Open center hydraulic
system• Separate, dedicated
pumps for steering and implement systems
• Up to 3 rear remote valves with ISO 1/2-inch couplers
• Category 2 rear 3-point hitch with position and draft control
• Telescopic ball ends and stabilizers
• 540/1000 RPM PTO standard with both shafts included for versatility
• Push button PTO engagement
Front Loader• Manufactured by Alo• Heavy duty boom design
for performance and visibility
• Heavy lift capacity and high lift height
• Available self-leveling configuration
• Conveniently placed joystick loader control
• Easy loader removal with integrated parking stands
• Quick connect hydraulic lines
• Bucket level indicator• "Euro" hook-type tool
attachment system and a wide range of tools
HIGHLIGHTS
X6 STANDARD SERIES
Loader Model L441 L446 L451 L456
Loader Type Non-Self Leveling Self Leveling Non-Self Leveling Self Leveling
Max. Lift Height at Pivot Pin in (mm) 148 (3750) 148 (3750) 157 (4000) 157 (4000)
Lift Capacity to Max. Height 31.5” (800mm) Fwd of Pivot Pin lb (kg) 3,307 (1500) 3,593 (1630) 3,616 (1640) 3,792 (1720)
Breakout Force at Ground Level 31.5” (800 mm) Fwd of Pivot Pin lb (kg) 3,814 (1730) 4,211 (1910) 4,101 (1860) 4,564 (2070)
Bucket Rollback Force 31.5” (800 mm) Fwd of Pivot Pin lb (kg) 6,173 (2800) 6,107 (2770) 6,261 (2840) 6,195 (2810)
McCormick North America2590 Breckinridge Blvd. / Duluth, GA 30096(866) 327 - 6733 / www.McCormickNA.com
McCormick and McCormick Logo are registered trademarks of McCormick International USA in the U.S. and/ or other countries. International Harvester and Farmall are trademarks of CNH America LLC. © 2017 McCormick International USA, Inc. All Rights Reserved. The standard and optional equipment and the availability of individual models might vary from one country to the next. McCormick International USA, Inc. reserves the right to undertake modifications without prior notice to the design and technical equipment at all times without this resulting in any obligation whatsoever to make such modifications to units already sold. While every effort is made to ensure that the specifications, descriptions, and illustrations in this brochure are correct at the time of printing, these are also subject to change without prior notice. Illustrations might show optional equipment, and might not show all standard equipment.
Tractor Model X6.420 STANDARD X6.430 STANDARD
PerformanceRated ISO Engine HP @ 2200 RPM HP (kW) 111 (82) 121 (89)
Rated ISO PTO HP @ 2200 RPM* HP (kW) 101 (74) 111 (82)
Max. ISO Engine HP with Power Plus HP (kW) 121 (89) @ 1900 RPM 133 (98) @ 1900 RPM
Max. ISO PTO HP with Power Plus* HP (kW) 109 (81) @ 1900 RPM 121 (89) @ 1900 RPM
Max. Engine Torque with Power Plus lb ft (Nm) 367 (498) @ 1400 RPM 405 (549) @ 1400 RPM
EngineEngine Type BETAPOWER diesel engine; emissions compliant using advanced Selective Catalytic Reduction (SCR) technology
Engine Size 4.5 Liter, 4-cylinder
Fuel / DEF Capacity gal (liter) 47.6 (180) / 6.6 (25)
Drive TrainTransmission Type 12 x 12 speeds; 4 gears and 3 ranges; synchronized mechanical shuttle; 25 mph (40 kph) transport speed
Optional Transmission 16 x 16 speeds with creeper gear; 36x12 speeds with hydraulic power shuttle and 3-speed power shift
Rear Axle Heavy duty flange rear axle; internal planetary final drives; hydraulic wet disc brakes
Differential Lock Front and rear fully locking differentials; electronic control; hydraulic engagement
4wd Front Axle Push button 4wd engagement; center locking differential; outboard planetary final drives; automatic 4-wheel braking
Hydraulics, 3-point Hitch, PTOImplement Hydraulic System Type/Max. Flow gpm (lpm) Open center system with separate steering and implement pumps: 7.6 (29) to steering; 17.4 (66) to implements
Rear Remote Valves 2 standard; 3 optional; with ISO 1/2" quick couplers
Rear 3-point Hitch Type Category 2; mechanical operation; position and draft sensing
3-point Lift Capacity @ Hitch lb (kg) 9,900 (4500)
Rear PTO 540 / 1000; electro-hydraulic engagement; push-button control
Operator's AreaOperator's Area Large flat foot deck; 2-post folding ROPS with sun canopy; entry from both sides; front mud guards; rear work light
Seat and Front Dash Adjustable vinyl seat with armrests; mechanical suspension; tilt and telescopic steering wheel; front dash with user interface
Wheelbase in (mm) 100 (2540)
Height Over ROPS with Factory Wheels in (mm) 110.4 (2805)
Overall Length with Front Weights in (mm) 173 (4400)
Base Weight without Ballast lb (kg) 9,370 (4250)
* Manufacturer's calculated estimate.