ORDERING EXAMPLE: 6DR - TL - L25/9DW - OPTIONS - DIM - UNV - OW - OF - CS - TRIM OPTIONS - N - F1 HOUSING TRIM MOUNT.

HOUSING SERIES LUMENS [ 1 ] COLOR OPTIONS CONTROL [ 2 ] VOLTAGE6DR-TLTrimLock

L8 800lmL15 1,500lmL25 2,500lm

9DW Dim to warm (95 CRI, 1800K – 3000K)

SCA_ _ Sloped ceiling adapter [ 3 ]

ATH Airtight construction F FuseCP Chicago plenum (CCEA) [4 ]

EM/7W 7-watt emergency battery [ 5 ]

DIM Dimming driver (0-10V signal to control dimming and CCT)

LUT Lutron Ecosystem enabled

UNV 120-277V347 347V [6 ]

EM/10W 10-watt emergency battery [ 7 ]

EM/10W/RTS 10-watt emergency battery with regressed test switch [ 8 ]

SDT Stepdown transformer [ 9 ]

TC Adjustable mounting arms for 1-1/2″ – 2-1/4″ thick ceilings

TRIM [ 1 0]

TRIM TYPE DISTRIBUTION [ 1 1 ] FLANGE TYPE REFLECTOR FINISH TRIM OPTIONSO Open reflectorL Flush lensR Regressed lensA Angled lens [ 1 2 ]

S Non-conductive flush lens for shower applications [ 1 3 ]

W Wide 65° Open 55° Flush 55° RegressedM Medium 35° Open 35° Flush 35° RegressedN Narrow 10° Open 25° Flush 25° RegressedWW Wall wash [ 1 4 ]

OF 1/2″ standard flange

SF 1/4″ mud-in flange [ 1 5 ]

Open trim typesCS Clear semi-specular anodizeSG Satin-glow anodizeGD Gold anodizeCG Champagne gold anodizePW Pewter anodizeSPC Clear specular anodizeRG Rose gold anodizeWH White texture powder coat BL Black texture powder coat

Lens trim types

MWT Textured white trim flange [ 1 6 ]

IP IP65 rated trim [ 1 7 ]

AD Diffuse acrylic lens [ 1 8 ]

PD Diffuse 1/8″ polycarbonate lens [ 1 9 ]

TD Diffuse polycarbonate lens media at top of open reflector [ 2 0 ]

WET/CC Wet location, covered ceiling listed

AM Anti-microbial [ 2 1 ]

CS Clear semi-specular powder coatWH White texture powder coat BL Black texture powder coatMB Black texture splay with white flange [ 2 2 ]

MOUNTINGMOUNTING TYPE [ 2 3] MOUNTING HARDWARE [ 2 4 ] N Open pan for new constructionI IC-rated enclosure for new construction [ 2 5 ]

R Remodel kit [ 2 6 ]

F1 Integral 2-position fixed pan bracket, universal bar hanger included [ 2 7 ]

BA1 Adjustable butterfly pan bracket, bar hanger not included [ 2 8 ]

CA1 Adjustable caterpillar pan bracket, universal bar hanger included [ 2 9]

FEATURES

■ Innovative TrimLock reflector retention system ensures trim remains flush with ceiling plane

■ Dim to warm from 1800K to 3000K CCT, minimum 95 CRI

■ Beam angles ranging from 10º narrow to 65º wide for tailored performance

■ Open reflector with 9 finishes to complement any interior style

■ Die cast trim choices include flush, regressed, or angled lens

■ Contemporary design provides glare-free illumination for a soft ceiling appearance

SPECIFICATIONS ■ HOUSING – Die-cast aluminum trim

housing with forged aluminum heat sink. Galvanized steel splice compartment with driver mounting plate/enclosure. Swing-out mounting arms adjust for ceiling thickness from 1/2″ - 1-7/16″ (see options for additional ceiling thicknesses).

■ TRIMLOCK – Innovative TrimLock reflector retention system ensures the trim remains flush with the ceiling plane.

■ OPEN REFLECTOR – Low-iridescent anodized aluminum. Clear semi-specular finish standard.

■ LENSED TRIM – Die-cast aluminum frame with micro-prismatic, tempered glass lens.

■ ELECTRICAL – High-performance Class 2 C.O.B. LED array. Modular quick-connect plug for easy field-connection of LED light assembly to driver. Reported L70>55,000 hours. Reported L90>55,000 hours. Estimated L70 = 200,000 hours.

■ MOUNTING – Recessed. 20 ga. galvanized steel mounting pan for new construction or IC-rated enclosure. Remodel kit option includes receiver bracket hardware.

■ LISTINGS – ■ cCSAus conforms to UL STD 1598;

Certified to CAN/CSA STD C22.2 No. 250.0 for damp locations. LED light assembly conforms to UL 2108 for remote installation.

■ Suitable for wet location under covered ceiling when specified with WET/CC or TD options.

■ IC-rated for direct contact with insulation when specified with I Mounting Type.

■ City of Chicago Environmental Air approved when specified with CP option.

■ Complies with ASTM-E283 when specified with ATH option.

■ RoHS compliant. ■ 24 | JA8 compliance.

■ WARRANTY – 5-year limited warranty, see hew.com/warranty.

NOTES1 Lumen output based on O trim type, W

distribution and CS finish, 3500K/80CRI. Actual lumens may vary +/-5%. See page 2 for FIXTURE PERFORMANCE DATA.

2 See page 4 for ADDITIONAL DRIVER OPTIONS.

3 11-1/2″ aperture, specify degrees of slope in 5° increments, 05°-30°. See page 4 for SLOPED CEILING ADAPTOR DETAILS. Not available with ATH or TC options. N Mounting Type only. Not available with WET/CC.

4 I Mounting Type required.5 N and R Mounting Types only.6 Not available with EM batteries.7 N and R Mounting Types only.8 Not available with WET/CC, ATH or IP

options. N and R Mounting Types only. See page 5 for EM/10W/RTS DETAILS.

9 May be required for 347V, see product builder at hew.com/product-builder

1 0 Trim ships separately.1 1 Beam angle based on CS or WH reflector

finish.1 2 Available with WW Distribution only.1 3 W Distribution, OF Flange Type, WH

Reflector Finish only. Standard with AD diffuse acrylic lens. IP and WET/CC options standard.

1 4 O and A Trim Types only.1 5 For use with mud-in plaster construction

only, supplied with mud flange installation kit. See page 4 for FLANGE TYPE DETAILS. Not available with ATH or IP options.

1 6 Not available with WH Reflector Finish, L or S Trim Types.

1 7 L and R trim types only.1 8 Not available with O trim type. W

distribution only.1 9 Not available with O trim type. W

distribution only.

2 0 O Trim Type only. WET/CC standard.2 1 WH and BL Reflector Finishes only. Not

available with S Trim Type.2 2 R Trim Type only. Not available with MWT.2 3 Mounting hardware required (N

and I only), ordered separately, see MOUNTING HARDWARE ordering info. See page 4 for MOUNTING TYPE DETAILS.

2 4 Additional mounting hardware options available. See page 5 for MOUNTING HARDWARE DETAILS.

2 5 L15 lumen package max.2 6 Also used in new construction sheetrock

ceilings.2 7 N and I Mounting Types only.2 8 N Mounting Type only.2 9 N Mounting Type only.

NEW CONSTRUCTION AND REMODEL

ø6″

L8 - L15: 6-5/8″L25: 7-3/8″

1/2″ min1-7/16″ max

16-1/2″

H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.

Downlights Page 1 of 5HEW.70732.LA REV.02/20/20

6DR 6″ Downlight – Round

CATALOG #: ����������������������������������������������

TYPE: ����������������������������������������������������

PROJECT: �������������������������������������������������

FIXTURE PERFORMANCE DATA OPEN REFLECTOR TRIM TYPE

DIST. DELIVERED LUMENS

CCT AT 100% (FULL OUTPUT)

CCT AT 1% (FULL DIM) WATTAGE EFFICACY

(lm/W)

L8

W 887

3000K 1800K

14.0 63.3M 860 14.0 61.5N 823 14.0 58.8

L15

W 1554 23.4 66.5M 1508 23.4 64.5N 1442 23.4 61.7

L25 W 2471 37.7 65.5

M 2465 37.7 65.4N 2518 37.7 66.8

FLUSH LENS TRIM TYPE

DIST. DELIVERED LUMENS

CCT AT 100% (FULL OUTPUT)

CCT AT 1% (FULL DIM) WATTAGE EFFICACY

(lm/W)

L8

W 739

3000K 1800K

14.0 52.8M 797 14.0 56.9N 802 14.0 57.3

L15

W 1296 23.4 55.5M 1397 23.4 59.8N 1405 23.4 60.1

L25 W 2123 37.7 56.3

M 2284 37.7 60.6N 2302 37.7 61.1

REGRESSED LENS TRIM TYPE

DIST. DELIVERED LUMENS

CCT AT 100% (FULL OUTPUT)

CCT AT 1% (FULL DIM) WATTAGE EFFICACY

(lm/W)

L8

W 716

3000K 1800K

14.0 51.1M 775 14.0 55.4N 781 14.0 55.8

L15

W 1254 23.4 53.7M 1359 23.4 58.2N 1370 23.4 58.6

L25 W 2054 37.7 54.5

M 2226 37.7 59.1N 2243 37.7 59.5

■ Photometrics tested in accordance with IESNA LM-79. Results shown are based on 25ºC ambient temperature.

■ Wattage shown is based on 120V input. ■ Results based on 3000K, 95 CRI, full output, actual lumens may vary

+/-5% ■ Use multiplier table to calculate additional options.

MULTIPLIER TABLESREFLECTOR FINISH

CATALOG NUMBER

CONVERSION FACTOR

O TR

IM

CS 1.00SG 1 0.92GD 0.93CG 0.96PW 0.86SPC 1.02RG 0.88

WH 1 0.89BL 1 0.47

R TRI

M WH 1.00CS 0.98BL 0.79

TRIM

CATALOG NUMBER

CONVERSION FACTOR

S 0.85AD 0.85PD 0.85TD 0.75

WET/CC 2 0.851 Distribution will also be

affected, consult factory.2 Use multiplier when

specified with O Trim Type.

6000

4000 30002500

2000 1500

PHOTOMETRY6DR-TL-L25/9DW-DIM-UNV-OW-OF-CS Total Luminaire Output: 2471 lumens; 37.7 Watts | Efficacy: 65.5 lm/W | 95.0 CRI; 3598K CCT

90°

0° 20°

40°

80°

60°

0°

CAND

LEPO

WER D

ISTRI

BUTIO

N

VERTICAL ANGLE HORIZONTAL ANGLE ZONAL LUMENS0º0 20785 1963 18715 2157 61125 2464 114035 751 47245 57 4455 16 1565 2 275 0 085 0 090 0

LUME

N SU

MMAR

Y

ZONE LUMENS % FIXTURE

0 - 40 2410 980 - 60 2470 1000 - 90 2471 1000 - 180 2471 100

6DR-TL-L25/9DW-DIM-UNV-OM-OF-CS Total Luminaire Output: 2465 lumens; 37.7 Watts | Efficacy: 65.4 lm/W | 95.0 CRI; 3579K CCT90°

0° 20°

40°

80°

60°

0°

CAND

LEPO

WER D

ISTRI

BUTIO

N

VERTICAL ANGLE HORIZONTAL ANGLE ZONAL LUMENS0º0 49885 4937 43015 2890 81425 1755 80635 492 34145 57 5155 17 1665 5 575 1 285 0 090 0

LUME

N SU

MMAR

Y

ZONE LUMENS % FIXTURE

0 - 40 2391 970 - 60 2458 1000 - 90 2465 1000 - 180 2465 100

H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.

Downlights Page 2 of 5HEW.70732.LA REV.02/20/20

6DR 6″ Downlight – Round

6DR-TL-L25/9DW-DIM-UNV-ON-OF-CS Total Luminaire Output: 2518 lumens; 37.7 Watts | Efficacy: 66.8 lm/W | 95.0 CRI; 3578K CCT90°

0° 20°

40°

80°

60°

0°

CAND

LEPO

WER D

ISTRI

BUTIO

N

VERTICAL ANGLE HORIZONTAL ANGLE ZONAL LUMENS0º0 273465 12219 93415 2526 73825 1269 60435 301 22245 16 1355 5 565 1 275 0 085 0 090 0

LUME

N SU

MMAR

Y

ZONE LUMENS % FIXTURE

0 - 40 2498 990 - 60 2516 1000 - 90 2518 1000 - 180 2518 100

6DR-TL-L25/9DW-DIM-UNV-OWW-OF-CS Total Luminaire Output: 1255 lumens; 37.7 Watts | Efficacy: 33.3 lm/W | 95.0 CRI; 3568K CCT

0° 20°

40°

60°

80°90°

-20°

-40°

-60°

-80°-90°

0° 90°

CAND

LEPO

WER D

ISTRI

BUTIO

N

VERTICAL ANGLE

HORIZONTAL ANGLE ZONAL LUMENS0º 45º 90º 135º 180º

0 960  960  960  960  960 5 1085  1048  1000  615  501  8215 1108  1084  1402  342  363  23225 1929  1149  1306  298  341  42335 670  497  466  256  291  26245 53  45  109  207  230  9855 26  25  67  144  152  7465 20  18  40  87  89  5075 8  6  19  48  48  2785 0  0  3  13  10  790 0  0  0  0  0 

LUME

N SU

MMAR

Y

ZONE LUMENS % FIXTURE

0 - 40 999 800 - 60 1170 930 - 90 1255 1000 - 180 1255 100

6DR-TL-L25/9DW-DIM-UNV-LM-OF-WH Total Luminaire Output: 2284 lumens; 37.7 Watts | Efficacy: 60.6 lm/W | 95.0 CRI; 3549K CCT90°

0° 20°

40°

80°

60°

0°

CAND

LEPO

WER D

ISTRI

BUTIO

N

VERTICAL ANGLE HORIZONTAL ANGLE ZONAL LUMENS0º0 53925 5181 47515 3391 91225 1053 50235 275 18345 111 8855 66 5965 39 3975 20 2185 4 590 0

LUME

N SU

MMAR

Y

ZONE LUMENS % FIXTURE

0 - 40 2072 910 - 60 2218 970 - 90 2284 1000 - 180 2284 100

6DR-TL-L25/9DW-DIM-UNV-RM-OF-WH Total Luminaire Output: 2215 lumens; 37.7 Watts | Efficacy: 58.8 lm/W | 95.0 CRI; 3549K CCT90°

0° 20°

40°

80°

60°

0°

CAND

LEPO

WER D

ISTRI

BUTIO

N

VERTICAL ANGLE HORIZONTAL ANGLE ZONAL LUMENS0º0 53615 5135 47015 3318 89325 1052 50135 279 18445 94 7655 51 4665 28 2875 12 1385 3 490 0

LUME

N SU

MMAR

Y

ZONE LUMENS % FIXTURE

0 - 40 2048 920 - 60 2170 980 - 90 2215 1000 - 180 2215 100

TRIMLOCK DETAILSTWIST PULL RELEASE

H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.

Downlights Page 3 of 5HEW.70732.LA REV.02/20/20

6DR 6″ Downlight – Round

SLOPED CEILING ADAPTOR DETAILS

A

11-1/2″Ceiling cutout: ø11-7/8″

A (HEIGHT) PLENUM HEIGHTLUMENS 5° 10° 15° 20° 25° 30°

L8 - L15 10-11/16″ 10-7/8″ 10-15/16″ 10-7/8″ 10-13/16″ 10-5/8″ 11-1/4″L25 11-7/16″ 11-9/16″ 11-5/8″ 11-5/8″ 11-1/2″ 11-1/4″ 12″

15° Shown

TRIM TYPE DETAILSOPEN OPEN (WALL WASH) FLUSH SHOWER ANGLED REGRESSED

ø6″ ø6″ ø5-5/8″ 1/8″ ø5-5/8″ 1/8″ ø5-5/8″ 1/8″ ø5-13/16″ 1/8″

1-1/2″

FLANGE TYPE DETAILS1/2″ STANDARD 1/4″ MUD-IN MUD FLANGE MOUNTING KIT (SLIM FLANGE TYPE)

ø7″Ceiling Cutout: ø6-1/2″

ø6-3/8″Ceiling cutout: ø6-3/4″

1/2″1/8″

ø9-1/2″ø6-9/16″

REFLECTOR FINISH DETAILSSPC Clear specular

SG Satin-glow

PW Pewter

GD Gold

CG Champagne gold

RG Rose gold

CS Clear semi-specular

WH White

BL Black

MOUNTING TYPE DETAILSNEW CONSTRUCTION IC-RATED REMODEL

16-1/2″

13-1/2″

ø6-1/2″6-3/4″

5″

B

C

A

D

LENGTHLUMENS A B C DL8 - L15 15-3/16″ 16″ 6-3/8″ 12-1/8″

Cross Section

ø6″

L8 - L15: 6-5/8″L25: 7-3/8″

Receiver Bracket

3-1/4″

2-3/4″

6-5/8″ 1-1/8″ minspace

Ceiling cutout

Driver and Junction Box

6-15/16″

4-1/8″

5-1/4″

H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.

Downlights Page 4 of 5HEW.70732.LA REV.02/20/20

6DR 6″ Downlight – Round

EM/10W/RTS DETAILS

Shown Installed

Test buttonfrom EM Driver

RTS trim nut

RTS trim washer

RTS trim

RTS TRIM CUTOUT (Outside pan boundary) Downlight cutout

MOUNTING HARDWARE DETAILS

F1 Integral 2-position fixed pan bracket, universal bar hanger included BA1 Adjustable butterfly pan bracket, bar hanger not included (N Mounting Type only)

CA1 Adjustable caterpillar pan bracket, universal bar hanger included (N Mounting Type only)

Mounts to t-bar or nailer bar

14″ minimum24″ maximum

Mounts to t-bar or nailer bar

14″ minimum24″ maximum

BA2 Adjustable butterfly pan bracket, heavy-duty universal bar hanger included (N Mounting Type only)

CA2 Adjustable caterpillar pan bracket, t-bar hanger included (N Mounting Type only)

Mounts to t-bar or nailer bar

12″ minimum24″ maximum

Mounts to t-bar

11″ minimum26″ maximum

H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.

Downlights Page 5 of 5HEW.70732.LA REV.02/20/20

6DR 6″ Downlight – Round