6GSH GLOBAL STANDARD HIGH HEAD
Global Pump® Standard High Head pumps are specifically designed to effectively handle a wide-range of liquids in applications such as liquid transfer, wash down, fire protection, fracking and jetting where high heads and pressure are required.
Global Pump Standard High Head pumps provide a dependable, highly efficient solution. The model 6GSH is capable of achieving maximum flows of 2,100 gpm (477 m3/h) and maximum total head of 412’ (126 m), with solids handling up to 0.875” (22.2 mm) in diameter.
The standard 6GSH is powered by a water-cooled, 6-cylinder diesel engine. Alternative drives are available, including other diesel engines or electric motor options.
FEATURES OPTIONSGlobal Pump’s rugged, heavy duty pumps are engineered specifically for portable application
Available with a variety of priming systems, including Global’s Auto Prime® automatic priming system (compressor-fed venturi priming) or a diaphragm priming system
Non-return valve uses only a single moving part to allow full flow with minimal restriction
Mechanical seal with glycol (biodegradable optional) quench allows the pump to start and run dry
Standard engine control panel provides preset emergency shutdown protection and allows the addition of automatic level control
Global Pump’s Environmental Box separates and silences air exhaust and returns liquid to the pump suction.
Fully guarded coupling Fuel cubes for extended run times and/or remote location as required
Pump casings are hydrostatically tested to 50 psig (345 kPa) above the peak casing design pressure
Sound attenuated enclosure options
Highway trailer with integral fuel cell/chassis, lights, fenders, tie downs, lifting bail, front and rear jacks. Trailer brakes can be offered as required
Skid-mounted formats with tie downs, lifting bail, and fork pockets
Hose racks, accessory containers and other custom features available as requiredWide range of suction and discharge fittings including Global Pump’s own “QD” Quick Disconnect fittings and accessories
l/s
m³/hr
US gpm
Po
wer
- hp
Hea
d -
ft
Hea
d -
mkW
22002100200019001800170016001500140013001200110010009008007006005004003002000
100
100
2002200
50
0
100
75
100
125
210020001900180017001600150014001300120011001000900800
150
700600
200
500
250
400
300
300
350
200100
400
0
0 10 20 30 40 50 60 70 80 90 100 110 120 130
50 100 150 200 250 300 350 400 450 500
2200 rpm
2100 rpm
2000 rpm
1900 rpm
1800 rpm
1700 rpm
1600 rpm
56
56
68.2
68.2
75.3
75.3
78.1
78.1
76.9
76.9
PUMP MATERIALCasing Cast Steel (CD4MCu is an option)Impeller CD4MCuBearing Housing Cast IronBearing Lubrication GreaseShaft Stainless SteelSeal Silicon Carbide on Silicon CarbideChassis/Fuel Cell SteelNon-Return Valve Nitrile Fitted Cast Iron
SPECIFICATIONSConnections 6” x 4” (150 mm x 100 mm)
ANSI FlangesMax Pump Speed 2,200 rpmMax Flow 2,100 gpm (477 m3/h) Max Head 412’ (126 m)Max Static Priming Lift 28’ (8.5 m)Temperature Limit 160° F (70° C)Solids Handling Capability 0.875” (22.2 mm)Max Casing Pressure 200 psig (1379 kPa)Fuel Cell 151 gallons (572 liters)Dry Weight 6,200 lbs
10162 East Coldwater Road, Davison, MI 48423Tel: 810.653.4828 Fax: 810.658.0632
1.866.360.PUMP www.globalpump.com
GLOBAL PUMP
© 2018 Global Pump
Specifications reflect model pictured, and are subject to revision without notice. Global Pump is not liable for any consequential, incidental or indirect damages relating to these specifications.
6GSH GLOBAL STANDARD HIGH HEAD
6GSH