Conference Secretariat 5716 Corsa Ave, Suite110 Westlake, Los Angeles CA-91362-7354, USA Tel: +1-888-843-8169, Fax: +1-650-618-1417, Ph: +1-650-268-9744, Toll free: +1-800-216-6499 Email: [email protected]Tentative Program http://nanomaterials.conferenceseries.com/ conferenceseries.com eme: “Biopolymers as Ecofriendly Polymers” **For Available Speaker Slots** biopolymers.conferenceseries.com September 7-9, 2017 Paris, France Biopolymers 6 th World Congress on
Transcript
Conference Secretariat5716 Corsa Ave, Suite110 Westlake, Los Angeles CA-91362-7354, USA
Networking and Refreshment Break @ Outside RoomSessions: Advanced Biopolymers |Natural Polymers | Biopolymers in Biofibers & Microbial CelluloseSession Chair: Maria Cristina Righetti, National Research Council, Italy
Session IntroductionTitle: Biosynthesis of block copolymer for poly(3-hydroxyalkanoate)Takahiko NAKAOKI, Ryukoku University, JapanTitle: Magnetism in metal-free phthalocyanine and graphite-like nanostructuresArmen Kocharian, California State University, USATitle: Constrained amorphous interphase and mechanical properties of bio-based polyestersMaria Cristina Righetti, National Research Council, ItalyTitle: Effect of additives on properties of bio-based polymers and their blendsPatrizia CINELLI, National research Council, ItalyTitle: Understanding the microphase morphology of concentrated cellulose solutions from their rheological behaviorYumei Zhang, College of Material Science and Engineering, China
Group Photo @ Rosewood RoomLunch Break @ Source Grill
Title: Controlled simple green synthesis of smaller sized aqueous quasi-spherical polymer-capped silver nanoparticlesSamuel Oluwatobi Oluwafemi, University of Johannesburg, South AfricaTitle: Preparation and characterization of organic montmorillonite- polyvinylalcohol-co-polyacrylic nanocomposite hydrogel for heavy metal uptake in waterEhsan A. H. A. Gomaa, Ain Shams University, EgyptTitle: Organic modification and functionalization of biobased aromatics and their use in industrial polymer formulationsElena Benedetti, AEP Polymers Srl, ItalyTitle: Dissolution of cellulose in ionic liquids via polyelectrolyte interaction Ye Chen, College of Material Science and Engineering, ChinaTitle: Fabrication of reduced graphene oxide/chitosan-based conductive hydrogel for biomedical applicationsNeslihan Alemdar, Marmara University, Turkey
Networking and Refreshment Break @ Outside RoomTitle: The effect of magnetic field on biophysical properties of different water samplesAmani Samy Hegazy, Ain Shams University, Egypt Title: Immittance responses study of dodecyltrimethylammonium bromide effect on 2-hydroxyethyl cellulose solid biopolymer electrolytes Mohd Ikmar Nizam Bin Haji Mohamad Isa, Universiti Malaysia Terengganu, Malaysia
Opening Ceremonyconferenceseries.com
Keynote ForumIntroductionTitle: New concept of resorbable biopolymer hybrids for implant applicationsXiang Zhang, University of Cambridge, United KingdomTitle: Novel approaches in hydrogel design from chemically-modified polysaccharidesRachel Auzely Velty, University Grenoble Alpes, FranceTitle: Radiation processed textile sludge for preparing eco-friendly bricksMubarak Ahmad Khan, Bangladesh Atomic Energy Commission, Bangladesh
Page 10
Title: Lignin phenol formaldehyde resole resin: Synthesis and characteristics Masoumeh Ghorbani, University of Natural Resources and Life Sciences, AustriaTitle: Composition dependence of the synergistic effect of nucleating agent and plasticizer in poly(lactic acid)Seyed Mohammad Kazem Fehri, University of Pisa, Italy
Day 2 August 05, 2016Rosewood Room
Keynote ForumTitle: Superior thermoplastics prepared entirely from lipids: Synthesis, structure and propertiesSuresh S. Narine, Trent University, CanadaTitle: Developing environment-sensitive molecular probes for target binding-activated fluorescence imagingYi Pang, The University of Akron , USA
Sessions: Biopolymers as Materials|Green Composites in BiopolymersSession Chair: Lovely Mathew, Mahatma Gandhi University, India
Session IntroductionTitle: Study on curing condition of furan resin for matrix of green compositesMasatoshi Kubouchi, Tokyo Institute of Technology, JapanTitle: Bioactive nanofibrous systems based on natural materialsElisa Mele, University Loughborough, United kingdomTitle: Alcayota films: Effect of crosslinkingMartin AMasuelli, Stanford University, USA
Networking and Refreshment Break @ Outside RoomTitle: Development and characterization of bio nano cellulose reinforced polyamide nanocomposites prepared by electron spinning methodLovely Mathew, Mahatma Gandhi University, IndiaTitle: The physical principles underpinning the emergence of structure in plants, and their application in the development of new biopolymer based materialsPhilipTurner, Edinburgh Napier University, United KingdomTitle: Bionanocomposites derived from natural hydrogel matrices: An application for water purificationShivani Bhardwaj Mishra, University of South Africa, South AfricaTitle: Maximum utilization of plant resources to produce edible nanocomposite bioplasticsLuiz Henrique Capparelli Mattoso, National Nanotechnology Laboratory for Agribusiness, BrazilTitle: Thermo sensitive gelling film mediated drug rectal delivery in the treatment of colorectal cancerLulu Wang, Institute of Materia Medica, ChinaTitle: Conversion of lipids into biopolymers and conjugatesAman Ullah, University of Alberta, Canada
WCBP-01Conformational transitions of uracil transporter-uraa from escherichia coli: A molecular simulation studyXi Zhao, Jilin University, China
WCBP-02Title: Development and in vivo evaluation of a Copper IUD coated with a biodegradable polymer Abi Santhosh Aprem, HLL Lifecare Ltd, India
WCBP-03Title: Furfuryl low-molecular-weight chitosan derivative as anti-adhesion after tendon regeneration surgeryTae-Il Son, Chung-Ang University, Republic of Korea
WCBP-04Title: Isolation and characterisation of pha-producing bacteria from the environment.Aisha Alwuhaib, University of Portsmouth, UK
WCBP-05Title: Investigations of takeout proteins’ ligand binding and release mechanism using molecular dynamics simulationXu-ri Huang, Jilin University, China
WCBP-06Title: Biopolymer chitosan/montmorillonite/nano γ-Al2O3 nanocomposites: Preparation and characterizationNahid Shajari, Islamic Azad University, Iran
WCBP-07Title: Tearing resistance of blown biodegradable films based on PLANorma Mallegni, University of Pisa, Italy
Page 11
WCBP-08Title: Multiscale simulations of a peptide - Zinc oxide compositeImmanuel Schäfer, University of Stuttgart, Germany
WCBP-09Title: Radiation copolymerization of different monomers and polymers producing hydrogels applied in water treatment processesReem Mohammed, Ain Shams University, Egypt
WCBP-10Title: Isolation and characterization of polyvinyl alcohol (PVA) degrading fungal strians from soilsSomayeh Mollasalehi. University of Manchester, United Kingdom
Sessions:Biopolymer Feed Stock Challenges & Opportunities|Biopolymers for Tissue Engineering|Future & Scope of BiopolymersSession Chair: Florent Allais, ABI – AgroParisTech, FranceTitle: Chemo-enzymatic synthesis and polymerizations of bio-based bisphenols derived from lignin: An access to novel 100% renewable alternating aromatic/aliphatic polymers Florent Allais, ABI – AgroParisTech, FranceTitle: Biodegradable and renewable polymers: How to contribute to a sustanable futureAndreas Kunkel, BASF SE, GermanyTitle: Preparation and characterization of silk/diopside composite nanofibers via electrospinning for tissue engineering applicationsAbbas Teimouri, Payame Noor University, Iran
Networking and Refreshment Break @ Outside RoomTitle: Preparation and characterization of bacterial cellulose-based biomaterial as scaffolds for articular cartilage tissue engineeringHuaping Wang, Donghua University, ChinaTitle: Biopolymers – Key actors in the medicine of the futureFrancisco M Goycoolea, University of Leeds, UKTitle: A tunable and scalable biomaterial for 3D cell development: applications in cartilage engineering and tumor engineeringBrigitte Deschrevel, University of Rouen, France
Keynote ForumIntroductionTitle: Structure property relationships of biobased epoxy resinsRichard A. Gross, Rensselaer Polytechnic Institute, USATitle: Bio-based thermosets from star-like highly functional reactive resinsDean C. Webster, North Dakota State University, USA
Title: Circular economy and sustainability of bioplastics and biobased materials: New challenges and future prospectiveAmar Mohanty, University of Guelph, Canada
Group Photo and Coffee Break: @ FoyerSessions: Biomaterials and Biopolymers
Session IntroductionSession Chair: David Grewell, Iowa State University, USA
Session Co-chair: Chang-Sik Ha, Pusan National University, KoreaTitle: Political landscape for bioplastics and biobased materialsRina Singh, Biotechnology Innovation Organization, USATitle: Biopolymer based bionanocompositesChang-Sik Ha, Pusan National University, KoreaTitle: Supramolecular polymers based on short peptides: Building on the building blocks of lifeRein V Ulijn, City University of New York, USATitle: Free radical polymerization of acrylic monomers from plant oilsAndriy Voronov, North Dakota State University, USATitle: The development of nonabsorbed potassium binding polymer microparticles (patiromer) for the treatment of hyperkalemiaBo Chen, Relypsa Inc., USATitle: Cellulose dissolution: promising approach for the preparation of composite materialsNoureddine Abidi, Texas Tech University, USA
Panel Discussion
Lunch Break: @ Texas ASessions: Biomaterials and Biopolymers (Cont..)
Session IntroductionSession Chair: Richard A. Gross, Rensselaer Polytechnic Institute, USA
Session Co-chair: Noureddine Abidi, Texas Tech University, USATitle: Synthesis of biobased nano composite materials: Metal nano particles stabilized in soy bean oil polymerBaki Hazer, Bülent Ecevit University, TurkeyTitle: Poly (glycerol-sebacate); A new bioelastomer with antimicrobial and immunomodulatory propertiesPeter Gabriele, Secant Group, USATitle: Multilayer core-sheath nanofiber scaffolds used in the differential release of bioactive moleculesDula Man, Delaware State University, USATitle: Reactive extrusion and in situ compatibilization of poly lactic acid and poly glycerol succinate: A sustainable way for toughening of PLAManjusri Misra, University of Guelph, CanadaTitle: Production of an antimicrobial edible casein-based materialElodie Chevalier, Université de Lyon, France
Registrations
Day 1 September 12, 2016
Texas B
Opening Ceremonyconferenceseries.com
Scientific Program
Page 14
Coffee Break: @ FoyerTitle: Facelift of PLLA: Effect of orientation on physical ageing in poly(L-Lactic Acid) filmsGagik Ghazaryan, ETH Zurich, Switzerland
Workshop Session Title: Biocatalytic routes to monomers and polymersRichard A. Gross, Rensselaer Polytechnic Institute, USATitle: A chemical platform for the production of bio-PETRyan L. Smith, Micromidas Inc., USA
Panel Discussion
Day 2 September 13, 2016
Texas B
Keynote ForumTitle: Fully bio-based non-isocyanate polyurethanes (NIPU) via cyclic carbonate/amine routeEtienne Grau, University of Bordeaux, France
Title: Sustainable plastics and the center for bioplastics and biocompositesDavid Grewell, Iowa State University, USA
Session Chair: Amar Mohanty, University of Guelph, CanadaSession Co-chair: Johan Pluyter, International Flavors and Fragrances, USA
Title: Biopolymers in flavor and fragrance delivery systemsJohan Pluyter, International Flavors and Fragrances, USATitle: Development of bio-based plywood adhesive utilizing protein recovered from hydrolyzed specified risk materialsBirendra B. Adhikari, University of Alberta, CanadaTitle: Fabrication of multifunctional biopolymer composites with high performance by controlling the dispersion and distribution of graphene in the compositesJinrui Huang, Chinese Academy of Forestry, ChinaTitle: Novel tung oil-based unsaturated ester macromonomer for thermosetting polymersChengguo Liu, Chinese Academy of Forestry, ChinaTitle: Creation of keratin resin and fibroin resin using fibrous animal waste productsShinji Hirai, Muroran Institute of Technology, JapanTitle: Isolation and characterization of polyvinyl alcohol (PVA) degrading fungal strains from soilsSomayeh Mollasalehi, University of Manchester, UK
Lunch Break: @ Texas ATitle: Biodegradation of biopolymers under soil and compost conditionsAsma Said Khalid Al Hosni, University of Manchester, UK
Workshop Session Title: High Performance, high bio-content thermosets for composites and coatingsDean Webster, North Dakota State University, USA
Panel Discussion
Coffee Break: @ FoyerPoster Presentations @ Foyer
BPBP-01Title: Biosynthesis of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) with high C6-monomer composition from CO2 by recombinant of Ralstonia eutrophaKenji Tanaka, Kindai University, Japan
BPBP-02Title: Valorisation of food wastes through acidogenic fermentationMaría C Veiga, University of A Coruña, Spain
BPBP-03Title: Study on the curing characteristics and synthesis process of modified urea-formaldehyde resin with low formaldehyde releaseJiyou Gu, Northeast Forestry University, China
BPBP-04Title: Thermal treatment of soybean protein and its effects on the water resistance of soybean protein adhesiveZhen-Hua Gao, Northeast Forestry University, China
Page 15
BPBP-05Title: Preparation and performance of water-borne acrylic wood coatings modified by rice husk ashShuangying Wei, Northeast Forestry University, China
BPBP-06Title: Comparative analysis between maize and cassava starch through XPSYanhua Zhang, Northeast Forestry University, China
BPBP-07Title: Zinc Oxide nanoparticles control skin infection and improve dermal wound healing in HumansRebeca Betancourt Galindo, Centro de Investigación en Química Aplicada, Mexico
BPBP-08Title: Surface modified chitin with silane as reinforcement in mortar compositesAnju Ramakrishnan, Indian Institute of Technology Madras, India
BPBP-09Title: The survival-dose effect model of microorganism implanted by low energy N+
Ning Zhang, Chinese Academy of Forestry, ChinaBest Poster Award Presentation
Day 3 September 14, 2016
Texas B
Keynote ForumTitle: Understanding biodegradability-The science, the misuse and true value propositionRamani Narayan, Michigan State University, USA
Workshop SessionTitle: Bio-based and biodegradable compostable plastics: Logic, definitions and testing methodsRamani Narayan, Michigan State University, USA
Coffee Break: @ FoyerSessions: Routes to drop-in monomers and bioplastics | Future and scope for biopolymers and bioplastics | New-to-the-world biopolyestersSession Chair: Oliver Ehlert, DIN CERTCO GmbH, Germany
Title: Certification of bioplastics – Standards and politicsOliver Ehlert, DIN CERTCO GmbH, GermanyTitle: PEF (polyethylene 2,5-furandicarboxylate): A new emerging biobased polyester from carbohydratesNathanael Guigo, University Nice Sophia Antipolis,FranceTitle: Biodegradable polymers from brewery wastewaterMaría C. Veiga, University of A Coruña, SpainTitle: Biopolymers-based active edible coatings to improve quality and safety of food productsElena Poverenov, Agricultural Research Organization The Volcani Center, Israel
Panel Discussion 12:25 - 12:40
Award & Closing Ceremony
Lunch Break: @ Texas A
Conference Series LLC2360 Corporate Circle, Suite 400Henderson, NV 89074-7722, USA
Polymer Science & Engineering August 22-24, 2016 New Orleans, USA
International Conference on
Scientific Program
conferenceseries.com
Page 17
Keynote ForumIntroductionTitle: Brief history of plastics and how they conquered the worldMosongo Moukwa, PolyOne Designed Structures and Solutions, USATitle: New chemical approaches to complete solvent removal and their applications in preparation of non-porous and porous PLGA microspheresHongkee Sah, Ewha Womans University, Republic of Korea
Group Photo
Networking & Refreshments Break:
Sessions: Polymer Physics
Session Introduction
Session Chair: Padmaja Guggilla, Alabama A&M University, USA
Title: MWCNT doped PVDF: Nanocomposite films and their Raman spectral analysisPadmaja Guggilla, Alabama A&M University, USATitle: Effect of dispersion process and anionic to non-ionic ratio on properties of waterborne polyurethane dispersionSuresh Kolekar, Pidilite private Ltd. IndiaTitle: The surface activity of polymeric materials as determined from computational simulationGuy Francis Mongelli, Case Western Reserve University, USATitle: IR TMOA-Infrared Transition Moment Orientational Analysis as a valuable method to determine the spatial orientation and order of distinct subunits in polymeric systemsA M Anton, University of Leipzig, GermanyTitle: Conducting polymers: Synthesis and kinetic study bypulsedradiolysisCecilia Coletta, Université Paris-Saclay, France
Session Chair: Ana Barros-Timmons, University of Aveiro, Portugal
Title: Grafting PLA onto GO and its effect on derived nanocomposites Ana Barros-Timmons, University of Aveiro, PortugalTitle: Strong biodegradability of vinyl polymers exerted by insertion of N-benzyl-4-vinylpyridinium PBVP(Br), halide into the main chainNariyoshi Kawabata, University of Shiga Prefecture, Japan
Networking & Refreshments Break:
Title: The glass transition temperature of thin polycarbonate films and trinitrotoluene (TNT): Measured by Flash Differential Scanning Calorimetry (Flash DSC)Nabila Shamim, Texas Tech University, USATitle: Influence of covalent and ionic crosslinking on structure development in hydrogels assembled via in situ photo-polymerizationSaminu M Magami, Edinburgh Napier University, United KingdomTitle: Studies of near surface dynamics and filler dispersion in nanocompositesJames Hart, Durham University, UKTitle: Quantum nanoparticles doped polymer waveguides for light propagationParva Chhantyal, Laser Zentrum Hannover, Germany
Panel Discussion
Registrations
Day 1 August 22, 2016
Hall B
Opening Ceremonyconferenceseries.com
Scientific Program
Page 18
Day 2 August 23, 2016
Hall BKeynote Forum
Title: Challenges for nano-scale imaging of polymeric nanostructures by electron microscopyHiroshi Jinnai, Tohoku University, Japan
Sessions: Frontiers in Polymer Science & Engineering | Polymers meet Biology & Biosystems | Applications of Polymers
Session Introduction
Session Chair: Nurettin Sahiner, Canakkale Onsekiz Mart University, Turkey
Title: Conductive PEI semi-IPN cryogels: Synthesis and characterizationNurettin Sahiner, Canakkale Onsekiz Mart University, TurkeyTitle: Degradable polymers for the oil and gas industrySherry Zhu , Schlumberger-Doll Research Center, USA
Networking & Refreshments Break:
Title: Powder cellulose nanocrystal (nanowhisker) prepared for functional filler of polymersToshihiko Arita, Tohoku University, JapanTitle: Preparation and characterization of functionalized heparin-loaded poly-ε-caprolactone fibrous mats to prevent infection with human papillomavirusesDaniela Gonzalez, University of Nebraska Lincoln, USATitle: Biodegradable drug delivery vehicles produced by controlled ring-opening polymerisations Mthulisi Khuphe, University of Leeds, United KingdomTitle: Preparation of a nanobiocomposite scaffold containing boron modified bioactive glass nanoparticles and biopolymers of cellulose acetate/pullulan/gelatin and evaluation of its application in dentin tissue engineeringReza Moonesi Rad, Middle East Technical University, TurkeyTitle: On the effect of autofrettage on compressive behavior of fiber metal composite cylinderSumana B G, Government Engineering College, India
Lunch Break:
Poster Presentations
PS-01Title: The catalytic activity of cathode with sputtered cobalt with graphene oxide on carbon paper
Dong Min Kim, Hongik University, Republic of Korea
PS-02Title: Ionic liquid-based polymer electrolytes via surfactant-assisted polymerization at the plasma-liquid interface
Ho-Suk Choi, Chungnam National University, Republic of Korea
PS-03Title: The use of poly (tris(2-aminoethyl)amine-co-glycerol diglycidyl ether microgel as template for Co, Ni nanoparticles and their use as catalyst for H2 production from NaBH4 hydrolysis
Nurettin Sahiner, Canakkale Onsekiz Mart University, Turkey
PS-04Title:The preparation of imidazolium based composite polymeric ionic liquid microgels containing Co metal nanoparticles and their use as catalyst in hydrolysis of NaBH4
Nurettin Sahiner, Canakkale Onsekiz Mart University, Turkey
PS-05Title: Synthesis of novel type of functional macromolecules by quasi living polymerizations and subsequent modifications
Balázs Pásztói, Hungarian Academy of Sciences, Hungary
Interactive sessions by JPK Instruments and Malvern Instruments
Title: Latest developments in hardware and applications for advanced, multi-detector GPC/SECCarrie Schindler, Malvern Instruments, USA
Networking & Refreshments Break:
Title: Modern tools for analyzing morphology and nano-mechanical properties of polymersMatt thompson, JPK Instruments, Germany
Workshop on Introduction to GPC with triple detection and its capabilitiesby: Carrie Schindler, Malvern Instruments, USA
Panel Discussion
Page 19
Day 3 August 24, 2016
Hall BSessions: Polymer Material Science & Engineering | Composite Polymeric Materials
Session Introduction
Session Chair: Mahdi Saud Alajmi, Public Authority for Applied Education and Training, Kuwait
Title: Mechanical and nanoindentation studies on nano-layered silicate reinforced recycled glass-filled polyamide 12 nanocomposites Mahdi Saud Alajmi, Public Authority for Applied Education and Training, Kuwait Title: Towards the realization of post-silicon smart systems: IPMC based sensorsSalvatore Graziani, University of Catania, ItalyTitle: Preparation of a photoactive 3D polymer pillared with metalloporphyrinRahmatollah Rahimi, Iran Universty of Science and Technology, Iran
Networking & Refreshments Break:
Title: Co, Ni and Cu metal nanoparticle containing cationic p(MTMA) microgel composites as catalyst for H2 generation and nitro compound reductionsOmer F Ozturk, Canakkale Onsekiz Mart University, TurkeyTitle: Photocatalytic properties of TiO2-Graphene nanocomposite as a 2D polymer photosensitized with porphyrinRahmatollah Rahimi, Iran University of Science and Technology, IranTitle: Effect of surface modification of multi wall carbon nanotubes on the electrical properties of the polymer composite epoxy/CNTMilena Kurkowska, Warsaw University of Technology, Poland
Panel Discussion
Lunch Break & Closing Ceremony
Conference Series LLC2360 Corporate Circle, Suite 400Henderson, NV 89074-7722, USA
