PRODUCT GUIDETB285

– 52 –TB250TB138FRTB235TB108 TB016 TB228

TB285Hydraulic excavator

The TB285 excavator is one of the latest additions to the Takeuchi line-up. Packed with a wide variety of standard features, such as, multiple working modes, secondary auxiliary hydraulics, a boom holding valve, and an overload alarm the TB285 excavator delivers unsurpassed value, performance and versatility. From the powerful and efficient turbocharged engine to the precision control of the load sensing hydraulic system, this versatile machine is at home on most any jobsite. With 15 feet of dig depth and almost 24.5 feet of reach, the TB285 is an outstanding alternative to the backhoe loader.

– 53 –TB153FR TB180FR TB285 TB1140

KEy fEaturEsTB285 Hydraulic Excavator

1. Powerful and efficient turbocharged engine is equipped with automatic idle and work settings like “Eco Mode'' to improve fuel efficiency and provide for quieter operation.

2. Automotive styled interior provides superior cab comfort and visibility along with a long list of standard features including automatic climate control.

3. Cushioned arm, boom and swing cylinders and precision pilot controls provide for smoother operation and quicker cycle times for increased production.

4. Reinforced arm with integrated thumb mount simplifies attachment installation while the long arm provides exceptional reach and dig depth.

5. Dual auxiliary hydraulic circuits provide easy flow rate adjustment and features programmable work modes as well as momentary or continuous operation and selectable 1-way or 2-way oil flow for the primary circuit.

6. Long life coolant and hydraulic oil reduce maintenance costs and service requirements.

7. Triple flanged track rollers provide increased roller / rail contact improving ride quality while the automatic track tensioning system maintains the proper tension.

8. Dual boom cylinders help provide excellent lifting capacity and are equipped with boom holding valves to help maintain load control in the event of a hose failure or sudden loss of pressure.

9. Excellent ground level service access is provided by the large, heavy gauge tilt-up covers.

10. Two year / 2,000 hour full machine warranty lets you work with confidence knowing your excavator is protected by one of the most comprehensive warranties in the industry today.

TB285

KEY FEATURES

– 54 –TB250TB138FRTB235TB108 TB016 TB228

• Pre-Delivery Inspection (PDI) should be performed prior to machine delivery to ensure proper machine function and maximum performance.

• Fuel and lubrication should be checked prior to delivery so there are no unexpected interruptions; proper lubrication will help ensure there are no unusual sounds during machine operation.

• Ensure all controls and circuits function properly and that they are crisp and responsive.

• Buckets and attachments should be installed properly.

• Clean the machine thoroughly and remove all plastic and protective coverings from the seat and control levers; the machine should look new as if it were being delivered to the customer.

• Clean and adjust the mirrors for optimum visibility.

• Slide the seat to its farthest rearward position so the customer can appreciate the spaciousness of the operator's compartment.

• Raise the seat to its highest position so you can demonstrate the multiple height adjustments.

• Safety lockout lever should be in the upright position so you can explain its function at the appropriate time.

• Engine hood and covers should be unlocked and remain closed until you are ready to discuss.

• Review the operator's manual to ensure that YOU know and understand all machine features, their function and benefits.

• Position the machine properly to allow for an orderly presentation. Takeuchi recommends the following:

1. Position the blade in front of the machine to allow easier viewing and access around the machine.

2. Adjust the boom swing as if you were digging in line with the right track so you can demonstrate how the machine can be positioned close to a wall or obstruction.

3. Rotate the house approximately 20°– 30° so the track frame may be used as a step for easy entry / egress and to demonstrate the visibility when operating close to a wall or obstruction.

4. Position the arm at approximately a 90° angle to the boom so that the arm is perpendicular to the ground.

5. If equipped with a pin-on bucket, position it so that it's resting flat on the ground.

6. Bucket coupler – if equipped with a bucket coupler, remove the bucket and set it beside the arm so that you can demonstrate the function at the appropriate time. Place the arm on the ground.

MACHINE PREPARATION

– 55 –TB153FR TB180FR TB285 TB1140

product dEtaIlsTB285 Hydraulic Excavator

• Bucket pin seals and o-rings help keep dirt and contaminants out of critical wear points.

• Dual pin position bucket provides a power dig position for tough applications and a curl position to maximize productivity. The general recommendation is to place in the curl position (hole nearest the main pin) to allow better range of motion and faster cycles.

• Takeuchi's exclusive Adjust-A-Hook coupler system significantly improves the fit of attachments by reducing looseness caused by wear, and offers quick “Turn-of-a-Bolt'' adjustment (no parts or shims are required). Wait until live demo to install the bucket to the coupler.

• Grease points are located down one side of the boom and arm for easy access, and should be greased daily.

• Large pins and bushings for superior durability.

• Integrated thumb mount is engineered into the arm structure to ensure component strength and minimizes installation time.

• Cushioned arm, boom and swing cylinders reduce shock to the operator and increase durability.

• Dual auxiliary circuits may be adjusted from the operator's seat; 1st auxiliary is high flow circuit and 2nd auxiliary is low flow circuit giving the operator greater attachment versatility. FLoW RaTE: 1st Auxiliary: 26.6 gpm 2nd Auxiliary: 14.5 gpm

• Steel hydraulic lines used extensively for greater durability and the hydraulic lines are routed to ensure long life.

• Segmented hydraulic lines on the boom and blade simplify replacement.

• Heavy duty boom with internal and external gusset reinforcements for greater strength.

• Dual boom cylinders provide exceptional strength and provide additional clearance for the buckets or other attachments.

• Heavy duty boom mount features a substantial casting and large diameter pin.

• Standard boom holding valve helps maintain load control in the event of a hose failure / loss of pressure.

ARM AND BOOM

TB285

– 56 –TB250TB138FRTB235TB108 TB016 TB228

• Blade frame features heavy duty rectangular steel tubing and substantial gusset reinforcements to enhance durability and prevent bending and twisting.

• Blade design enhances productivity due to its height and curvature which allows it to hold and push a large volume of material.

• Blade float is standard and allows the blade to float freely over the contour of the ground, simplifying finish work.

• Large tie down points on the right and left side of the blade and on the rear of the track frame make it easy to secure for transport.

• Three lifting points are provided; two are located on the blade and a third is located at the base of the boom.

• K-frame design reduces the build-up of dirt and debris and provides outstanding ground clearance.

• Triple flange track rollers limit the potential for de-tracking due to multiple contact points.

• Automatic two-speed travel shifts automatically to high torque mode when a load is encountered.

• Planetary drives generate a great amount of traction force allowing the machine to power through tough applications.

Initial 250 hours, then every 1000 hours.

• Two track options: 17.7" rubber or 21.7" steel (NOTE: steel track is not drilled to accept bolt-on rubber pads).

• Auto track tensioning system adjusts tension automatically in high speed mode.

• Long undercarriage enhances stability by putting more track surface in contact with the ground.

• Large slew bearing provides excellent stability and durability over the life of the machine.

BLADE AND UNDERCARRIAGE

= Service Interval

– 57 –TB153FR TB180FR TB285 TB1140

product dEtaIlsTB285 Hydraulic Excavator

• Heavy gauge steel construction of Takeuchi body panels ensures durability and protects engine and hydraulic components from damage.

• Small lockable service panel provides convenient access to fuel fill and sight gauges for both fuel and hydraulic oil.

• Large access panel features a front work light and allows access to the fuel tank, main hydraulic valve, hoses, hydraulic tank, coolant reservoir, washer fluid, and selector valve for one way and two way flow.

• Hydraulic oil sight gauge allows the operator to check oil level quickly and easily.

• High capacity steel hydraulic tank when filled with Takeuchi Genuine Hydraulic Oil extends oil change intervals reducing maintenance costs.

Up to 4000 hours.

• Hydraulic return filter is located inside the tank for easy servicing.

Initial 250 hours, then every 1000 hours.

• Side-by-side radiator and oil cooler are very efficient, easy to inspect, and provide outstanding cooling performance ensuring long component life.

• Hinged condenser mount allows greater access to coolers when needed.

• Travel alarm is standard safety equipment on all Takeuchi excavators.

• Storage area provides secure storage of tools and includes a grease gun holder.

• Large air vents on the right rear of the machine are covered by screens to help keep debris out of the coolers.

RIGHT SIDE

TB285

– 58 –TB250TB138FRTB235TB108 TB016 TB228

REAR • Wrap around counterweight provides outstanding

stability and protects vital components.

• Rear tilt-up hood features full width access to the engine and routine inspection points.

• EPA Interim Tier 4 compliant turbocharged engine is quiet, economical, and provides exceptional power and uses CEGR (Cooled Exhaust Gas Recirculation) technology for reduced maintenance requirements.

• Dual element air cleaners are easy to inspect and replace.

• Automatic fuel bleed system eliminates need for a costly service call if machine runs out of fuel.

• Load sensing hydraulic system is a multi-pump design that provides smooth multi-function performance that allows the engine to work efficiently.

• Long life coolant reduces maintenance and preserves the efficiency of the cooling system.

Every 1000 hours.

• Diagnostic test ports are provided at the hydraulic pump to assist technicians.

• Pilot filter ensures clean oil is provided to the precision joystick controls for longer component life.

Initial 250 hours, then every 1000 hours.

• 12 volt electrical system for easy integration of accessories.

– 59 –TB153FR TB180FR TB285 TB1140

• Wide opening door allows the operator to easily enter and exit the machine.

• Large grab handles and step enable the operator to easily and confidently enter and exit the cab.

• Pilot accumulator allows trapped pressure to be released making it easier to change hydraulic attachments and permits the work equipment to be lowered with the engine off.

• Cab air filter provides clean, fresh air into the cab when not in recirculation mode.

• Work lights: In addition to the boom mounted work light there are four work lights on the machine including work lights located on the right and left side of the body that help enhance visibility in low light conditions.

• Isolation mounted cabin reduces noise and vibration to the operator for greater comfort.

• Lever lock folds up to lock controls and to provide greater access into, and out of the operator's station.

LEFT SIDE

product dEtaIlsTB285 Hydraulic Excavator

TB285

– 60 –TB250TB138FRTB235TB108 TB016 TB228

• Newly designed operator's cab has more volume, improved visibility and is well appointed with a higher level of standard features that include an automotive style interior, AM / FM / MP3 radio, retractable front window, 2" retractable seatbelt, rearview mirrors, cup holder, and storage compartments.

• Automatic climate control is provided by a high capacity system that maintains a comfortable working environment by automatically adjusting the fan speed and temperature.

• Improved operator protection with:

ROPS: Roll Over Protective Structure TOPS: Tip Over Protective Structure FOPS Level 1: Falling Object Protective Structure

• LCD display provides the operator with vital machine information, including hour meter and trip meter to track both machine and jobsite hours, and it is easier to observe in varying light conditions.

• Multi-function switch bank includes on / off modes for work lights, windshield wiper, windshield washer, auto idle, Eco mode, high altitude, 1st auxiliary detent, lift alarm, beacon, and a primary auxiliary flow selector switch.

• Large top window with retractable sun shade helps reduce glare and offers better visibility for truck loading and observing for overhead hazards.

• 10-way adjustable high back suspension seat features adjustments for height, weight, and position.

• Sliding control towers move independently of the seat for outstanding comfort.

• Arm rests are easily adjusted for added comfort.

• Progressive pilot controls are low effort and smooth and allow the operator to have precise control for safe operation.

OPERATOR'S STATION

– 61 –TB153FR TB180FR TB285 TB1140

OPERATOR'S STATION continued

product dEtaIlsTB285 Hydraulic Excavator

• Proportional slide switches and push button controls for auxiliary hydraulics allow the operator to choose their preferred method for controlling attachments.

• Detent for 1st auxiliary circuit is standard and simplifies the operation of motorized attachments.

• Auxiliary hydraulic control system features three primary work modes, as well as, in cab flow adjustments for the primary and secondary auxiliary circuits ranging from 0—100%.

• Auto idle and one touch decelerator are standard equipment and reduce fuel consumption and improve communication on the jobsite.

• Lift overload alarm is standard and may be turned on so the operator is alerted when a load exceeds the machine’s hydraulic lifting capacity.

• Engine monitoring system provides warning lights, gauges, and audible alarms to alert the operator to any abnormality.

• ISO / SAE pattern change valve located under the floor mat allows operator to choose their preferred operational pattern.

• Ample storage and cup holders securely hold items close at hand and the 12 volt electrical outlet allows the operator to charge a cell phone or power other accessories.

• Two-speed button repositioned to the right joystick trigger button.

• Economy and high altitude work modes help optimize the machine’s performance and efficiency.

TB285

– 62 –TB250TB138FRTB235TB108 TB016 TB228

OPERATING PERFORMANCEOperating Weight

Maximum Digging DepthMaximum Dump HeightMaximum ReachMaximum Bucket Digging ForceMaximum Arm Digging ForceArm LengthSlew SpeedTraction Force

ENGINEMake / ModelTier RatingCylinders / DisplacementHorsepower Gross (SAE J1995)Horsepower Net (SAE 1349)Rated Engine SpeedMaximum TorqueEngine LubricationCooling SystemFuel Tank CapacityFuel Consumption (65% of Full Load)Electrical System

UNDERCARRIAGETraction Drive TypeParking BrakeTrack Roller TypeTrack RollersTrack Width

Track Ground Contact LengthGround PressureMaximum Travel SpeedLow RangeHigh Range

HYDRAULIC SYSTEMPump TypeTotal Hydraulic FlowPrimary Auxiliary Hydraulic FlowSecondary Auxiliary Hydraulic FlowSystem Operating PressureHydraulic Reservoir CapacityHydraulic System Capacity

Cab Rubber 18,780 lb (8,518 kg)Cab Steel 19,604 lb (8,892 kg)15 ft 0 in (4,570 mm)17 ft 3 in (5,270 mm)24 ft 5 in (7,435 mm)16,568 lb (7,515 kg)8,138 lb (3,691 kg)7 ft 0 in (2,130 mm)10.3 rpm19,783 lb (8,973 kg)

Yanmar / 4TNV98-TurboEPA Interim Tier 44 / 202 cu in (3.3 L)69.2 hp (51.6 Kw)66.5 hp (49.6 Kw)2,000 rpm223 ft-lb @ 1,475 rpm (302 Nm)10.8 qt (10.2 L)14.8 qt (14.0 L)33.8 gal (128 L)2.6 gal / hr (9.9 L / hr)12 volts / 80 amps

Planetary Reduction / Auto Shift DownSpring Applied, Hydraulically Released Permanently Sealed, Triple Flanged5 per sideRubber 17.7 in (450 mm) Steel 21.7 in (550 mm)

7 ft 3 in (2,210 mm)Rubber 5.5 psi Steel 4.8 psi

1.6 mph (2.6 km / hr)3.1 mph (5.0 km / hr)

Load Sensing Piston Pump62.5 gal / min (236.6 L / min)26.4 gal / min (100.0 L / min)14.5 gal / min (55.0 L / min)3,990 psi (27.5 mpa)19.3 gal (73.0 L)37.0 gal (140 L)

WORKING DIMENSIONSA. Maximum ReachB. Maximum Reach Ground LevelC. Maximum Dig DepthD. Maximum Vertical Dig DepthE. Maximum Dig HeightF. Maximum Dump HeightG. Blade Maximum LiftH. Blade Maximum Lower

24 ft 5 in (7,435 mm)23 ft 11 in (7,290 mm)15 ft 0 in (4,570 mm)12 ft 6 in (3,805 mm)24 ft 0 in (7,305 mm)17 ft 3 in (5,270 mm)1 ft 8 in (520 mm)1 ft 7 in (490 mm)

SPECIFICATIONS

– 63 –TB153FR TB180FR TB285 TB1140

spEcIfIcatIoNs & fEaturEsTB285 Hydraulic Excavator

24 ft 5 in (7,435 mm)23 ft 11 in (7,290 mm)15 ft 0 in (4,570 mm)12 ft 6 in (3,805 mm)24 ft 0 in (7,305 mm)17 ft 3 in (5,270 mm)1 ft 8 in (520 mm)1 ft 7 in (490 mm)

MACHINE DIMENSIONSA. Transport LengthB. Transport HeightC. Tail Swing (Slew) RadiusD. Counterweight Ground ClearanceE. Track Ground Contact LengthF. Undercarriage LengthG. Undercarriage Width (Rubber)H. Track Width (Rubber)H. Track Width (Steel)J. Ground ClearanceK. Minimum Front Radius (Straight)L. Minimum Front Radius (Offset)M. Offset Working Distance (Left)P. Offset Working Distance (Right)Q. Dozer Blade WidthR. Dozer Blade Height

21 ft 10 in (6,660 mm)8 ft 5 in (2,565 mm)5 ft 5 in (1,650 mm)2 ft 7 in (785 mm)7 ft 3 in (2,210 mm)9 ft 4 in (2,855 mm)7 ft 3 in (2,200 mm)17.7 in (450 mm)21.7 in (550 mm)1 ft 3 in (385 mm)8 ft 2 in (2,495 mm)6 ft 8 in (2,030 mm)2 ft 9 in (845 mm) @ 70°2 ft 5 in (730 mm) @ 60°7 ft 7 in (2,300 mm)1 ft 8 in (500 mm)

ENGINE– EPA Interim Tier 4 Compliant

– Automatic Fuel Bleed System

– Extended Life Coolant

– Dual Element Air Cleaner

– Automatic Idle

– Turbocharged

– Selectable Work Modes

– Automatic Preheat

– Large Capacity Radiator

– High Capacity Fuel Filters

ELECTRICAL– Instrumentation with: Hour Meter, Fuel Gauge

Coolant Temperature Gauge along with Audible and Visual Indicators for Low Engine Oil Pressure, High Engine Coolant Temperature, Air Filter Restriction, Charging System Voltage

– 12 volt System with 80 amp Alternator

– Multi Function Switch Bank

– Front and Side Halogen Lights

– Travel Alarm

– Horn

UNDERCARRIAGE AND FRAME– Triple Flange Track Rollers

– Automatic Track Tensioner

– 2-Speed Travel with Automatic Shift

– High Torque Planetary Final Drive

– Heavy Duty Dozer Blade with Float

– Large Wrap Around Counterweight

– 17.7" Rubber Tracks

– 21.7" Steel Tracks (optional)

– Power Angle Blade, Angles 25˚ Right and Left (optional)

HYDRAULIC– Load Sensing Hydraulic System

– Cushioned Boom and Arm Cylinders

– Pilot Controls

– Large Capacity Hydraulic Oil Cooler

– Primary Auxiliary Circuit with 1-Way and 2-Way Operation Plumbed to the Arm

– Primary Auxiliary Circuit with 3 Selectable Modes and In-Cab Flow Adjustments

– Secondary Auxiliary Circuit with Adjustable Flow Control System

– Auxiliary Detent (Primary Circuit)

– Accumulator

WORKING EQUIPMENT– Dual Boom Cylinders

– Boom Holding Valve with Lift Alarm

– Long Arm with Integrated Thumb Mount

– Heavy Duty, Easy Adjust Bucket Linkage

– Dual Position Bucket (optional)

– Heavy Duty Adjustable Bucket Coupler (optional)

– Main Pin Hydraulic Thumb (optional)

OPERATOR'S STATION– Cab with Certified ROPS / FOPS Protection

– 10-Way Adjustable Cloth Covered High Back Suspension Seat

– Quick Change Control Pattern ( ISO or SAE)

– Electro-Hydraulic Proportional Thumb Control of Auxiliary

– Hydraulic Functions

– AM / FM / MP3 Radio

– Automatic Climate Control System for Air-Conditioning and Heat

– 2" Seat Belt

– 3" Seat Belt (optional)

PRODUCT FEATURES

TB285

A

GH

B

FE

R DJ

C

Q

L

KP

M

– 64 –TB250TB138FRTB235TB108 TB016 TB228

Takeuchi TB285

Bobcat E80 M

CaseCX80

Caterpillar 308E CR SB

John Deere 85D

Komatsu PC88MR-8

Kubota KX080-3

Volvo ECR88

YanmarVIO 80

PerformanceTail Swing Design Conventional Minimal Conventional Minimal Zero Tail Minimal Zero Tail Zero Tail Zero Tail

Operating Weight 18,780 lb 18,689 lb 18,585 lb 18,371 lb 18,530 lb 18,558 lb 18,254 lb 18,629 lb 18,136 lb

Maximum Digging Depth 15' 0" 15' 4'' 15' 1'' 13' 8'' 14' 8'' 15' 2'' 15' 1.1'' 14' 11'' 14' 4''

Maximum Dump Height 17' 3'' 16' 8'' 15' 1'' NP 16' 10'' 15' 6'' 17' 2.7'' 16' 10'' 15' 3''

Maximum Reach (Ground Level) 23' 11'' 23' 11'' 23' 10'' 22' 11'' 24' 9'' 23' 5'' 23' 6.3'' 23' 9'' 23' 5''

Maximum Bucket Digging Force 16,568 lb 12,275 lb 12,790 lb 13,534 lb 12,368 lb 13,780 lb 14,660 lb 13,623 lb 15,863 lb

Maximum Arm Digging Force 8,138 lb 7,666 lb 7,644 lb 9,015 lb 7,209 lb 8,160 lb 8,554 lb NP 8,363 lb

Traction Force 19,783 lb NP 13,040 lb 14,500 lb 14,661 lb 15,050 lb 14,615 lb 12,589 lb NP

EngineMake / Model Yanmar / 4TNV98T Yanmar / 4TNV98 Isuzu / AU-4LE2X Mitsubishi / 4M40TL Isuzu / 4LE2X Komatsu / 4D95LE Kubota / V3307DIT Volvo / D3.4 Yanmar / 4TNV98

Tier Rating EPA Tier 4i EPA Tier 4i EPA Tier 4i EPA Tier 4i EPA Tier 4i EPA Tier 4i EPA Tier 4i EPA Tier 4i EPA Tier 4i

Horsepower Net (SAE 1349) 66.5 hp 54.2 hp 54.0 hp 65.0 hp 54.0 hp 65.0 hp 66.5 hp 55.0 hp 54.6 hp

Rated Engine Speed 2,000 rpm 2,000 rpm 2,000 rpm NP 2,000 rpm 1,950 rpm 2,000 rpm 2,100 rpm 2,000 rpm

Maximum Torque 223.0 ft-lb 182.9 ft-lb 155.0 lb-ft NP NP NP NP 173.0 lb-ft NP

UndercarriageTrack Width 17.7'' (RT) / 21.7'' (ST) 17.7'' 17.7'' 18.0'' 18.0'' 17.7'' 17.7'' 17.7'' 18.0''

Ground Pressure 5.5 psi 5.6 psi 5.5 psi NP 4.9 psi 5.4 psi 5.2 psi 5.5 psi 5.0 psi

Travel Speed Low Range 1.6 mph 1.8 mph 2.1 mph 2.0 mph 1.9 mph 1.8 mph 1.7 mph 1.6 mph 1.6 mph

Travel Speed High Range 3.1 mph 2.9 mph 3.2 mph 3.2 mph 3.1 mph 3.2 mph 3.1 mph 3.0 mph 2.8 mph

Hydraulic SystemTotal Hydraulic Flow 62.5 gpm 43.8 gpm 41.7 gpm NP 58.1 gpm 60.8 gpm 55.6 gpm 43.8 gpm 56.7 gpm

Primary Auxiliary Hydraulic Flow 26.4 gpm 31.7 gpm 18.0 gpm 33.8 gpm NP NP 26.4 gpm 23.8 gpm 31.7 gpm

Secondary Auxiliary Hydraulic Flow 14.5 gpm NP NP 16.9 gpm NP NP 17.6 gpm NP NP

Hydraulic Reservoir Capacity 19.3 gal 22.9 gal 13.0 gal 21.7 gal 15.0 gal 14.8 gal 19.8 gal 21.1 gal NP

DimensionsWidth 7' 7'' 7' 6'' 7' 7'' NP 8' 1'' 7' 8'' 7' 2.6'' 7' 6'' 7' 5''

Height 8' 5'' 8' 7'' 8' 10'' NP 8' 4'' 8' 11'' 8' 4'' 8' 9'' 8' 10''

Length (Transport) 21' 10'' 20' 2'' 22' 1'' 20' 0" 22' 4'' 20' 10'' 21' 1.9'' 21'0" 21' 2''

Ground Clearance 15.0'' NP 14.0'' NP 14.0'' NP 15.4'' 15.4'' 15.0''

Dozer Blade Height 20.0'' 17.0'' 17.7'' NP 18.0'' NP 19.7'' 18.5'' 18.0''

Boom Swing Angle (Degrees L / R) 70 / 60 70 / 55 NP NP 60 / 60 53 / 67 70 / 60 70 / 60 57 / 60

Min Front Swing Radius 6' 8'' 8' 2'' 9' 0" NP NP 8' 4'' 6' 6.7'' 6' 8'' 7' 9''

Tail Swing Radius 5' 5'' 4' 3'' 5' 5'' NP 4' 11'' 4' 5'' 4' 9.5'' 4' 2'' 3' 8''

– 65 –TB153FR TB180FR TB285 TB1140

compEtItIvE dEtaIlsTB285 Hydraulic Excavator

Takeuchi TB285

Bobcat E80 M

CaseCX80

Caterpillar 308E CR SB

John Deere 85D

Komatsu PC88MR-8

Kubota KX080-3

Volvo ECR88

YanmarVIO 80

PerformanceTail Swing Design Conventional Minimal Conventional Minimal Zero Tail Minimal Zero Tail Zero Tail Zero Tail

Operating Weight 18,780 lb 18,689 lb 18,585 lb 18,371 lb 18,530 lb 18,558 lb 18,254 lb 18,629 lb 18,136 lb

Maximum Digging Depth 15' 0" 15' 4'' 15' 1'' 13' 8'' 14' 8'' 15' 2'' 15' 1.1'' 14' 11'' 14' 4''

Maximum Dump Height 17' 3'' 16' 8'' 15' 1'' NP 16' 10'' 15' 6'' 17' 2.7'' 16' 10'' 15' 3''

Maximum Reach (Ground Level) 23' 11'' 23' 11'' 23' 10'' 22' 11'' 24' 9'' 23' 5'' 23' 6.3'' 23' 9'' 23' 5''

Maximum Bucket Digging Force 16,568 lb 12,275 lb 12,790 lb 13,534 lb 12,368 lb 13,780 lb 14,660 lb 13,623 lb 15,863 lb

Maximum Arm Digging Force 8,138 lb 7,666 lb 7,644 lb 9,015 lb 7,209 lb 8,160 lb 8,554 lb NP 8,363 lb

Traction Force 19,783 lb NP 13,040 lb 14,500 lb 14,661 lb 15,050 lb 14,615 lb 12,589 lb NP

EngineMake / Model Yanmar / 4TNV98T Yanmar / 4TNV98 Isuzu / AU-4LE2X Mitsubishi / 4M40TL Isuzu / 4LE2X Komatsu / 4D95LE Kubota / V3307DIT Volvo / D3.4 Yanmar / 4TNV98

Tier Rating EPA Tier 4i EPA Tier 4i EPA Tier 4i EPA Tier 4i EPA Tier 4i EPA Tier 4i EPA Tier 4i EPA Tier 4i EPA Tier 4i

Horsepower Net (SAE 1349) 66.5 hp 54.2 hp 54.0 hp 65.0 hp 54.0 hp 65.0 hp 66.5 hp 55.0 hp 54.6 hp

Rated Engine Speed 2,000 rpm 2,000 rpm 2,000 rpm NP 2,000 rpm 1,950 rpm 2,000 rpm 2,100 rpm 2,000 rpm

Maximum Torque 223.0 ft-lb 182.9 ft-lb 155.0 lb-ft NP NP NP NP 173.0 lb-ft NP

UndercarriageTrack Width 17.7'' (RT) / 21.7'' (ST) 17.7'' 17.7'' 18.0'' 18.0'' 17.7'' 17.7'' 17.7'' 18.0''

Ground Pressure 5.5 psi 5.6 psi 5.5 psi NP 4.9 psi 5.4 psi 5.2 psi 5.5 psi 5.0 psi

Travel Speed Low Range 1.6 mph 1.8 mph 2.1 mph 2.0 mph 1.9 mph 1.8 mph 1.7 mph 1.6 mph 1.6 mph

Travel Speed High Range 3.1 mph 2.9 mph 3.2 mph 3.2 mph 3.1 mph 3.2 mph 3.1 mph 3.0 mph 2.8 mph

Hydraulic SystemTotal Hydraulic Flow 62.5 gpm 43.8 gpm 41.7 gpm NP 58.1 gpm 60.8 gpm 55.6 gpm 43.8 gpm 56.7 gpm

Primary Auxiliary Hydraulic Flow 26.4 gpm 31.7 gpm 18.0 gpm 33.8 gpm NP NP 26.4 gpm 23.8 gpm 31.7 gpm

Secondary Auxiliary Hydraulic Flow 14.5 gpm NP NP 16.9 gpm NP NP 17.6 gpm NP NP

Hydraulic Reservoir Capacity 19.3 gal 22.9 gal 13.0 gal 21.7 gal 15.0 gal 14.8 gal 19.8 gal 21.1 gal NP

DimensionsWidth 7' 7'' 7' 6'' 7' 7'' NP 8' 1'' 7' 8'' 7' 2.6'' 7' 6'' 7' 5''

Height 8' 5'' 8' 7'' 8' 10'' NP 8' 4'' 8' 11'' 8' 4'' 8' 9'' 8' 10''

Length (Transport) 21' 10'' 20' 2'' 22' 1'' 20' 0" 22' 4'' 20' 10'' 21' 1.9'' 21'0" 21' 2''

Ground Clearance 15.0'' NP 14.0'' NP 14.0'' NP 15.4'' 15.4'' 15.0''

Dozer Blade Height 20.0'' 17.0'' 17.7'' NP 18.0'' NP 19.7'' 18.5'' 18.0''

Boom Swing Angle (Degrees L / R) 70 / 60 70 / 55 NP NP 60 / 60 53 / 67 70 / 60 70 / 60 57 / 60

Min Front Swing Radius 6' 8'' 8' 2'' 9' 0" NP NP 8' 4'' 6' 6.7'' 6' 8'' 7' 9''

Tail Swing Radius 5' 5'' 4' 3'' 5' 5'' NP 4' 11'' 4' 5'' 4' 9.5'' 4' 2'' 3' 8''

TB285

– 154 –

®

Those in the know, know Takeuchi

519 Bonnie Valentine Way Pendergrass, Georgia 30567www.takeuchi-us.com