Date post: | 13-Mar-2016 |
Category: |
Documents |
Upload: | guilherme-rossi |
View: | 212 times |
Download: | 0 times |
Article with seals in 33080 33081 33082 33083
Article with seals in 26090 26091 26093 26094 33070 33071 33072 33073 33170 33172 33173
Article with seals in 33060 33061 33094 33096 33160 33194 33196Compatible fluids Oils, lubricants and similar Oils, lubricants and similar Oils, lubricants and similarSuction tube upper body Aluminium Aluminium AluminiumSuction tube Carbon steel Carbon steel Carbon steelAir inlet connection F 1/4” G F 1/4” G F 1/4” G F 1/4” G F 1/4” G F 1/4” G F 1/4” G F 1/4” G F 1/4” G F 1/4” G F 1/4” GFluid outlet connection F 3/4” G F 3/4” G F 3/4” G F 3/4” G F 1/2” G F 1/2” G F 1/2” G F 1/2” G F 3/4” G F 3/4” G F 3/4” GAir working pressure 6 - 8 6 - 8 6 - 8 6 - 8 6 - 8 6 - 8 6 - 8 6 - 8 6 - 8 6 - 8 6 - 8Average air consumption 250 250 250 250 230 230 230 230 370 370 370Noise level 81 81 81 81 81 81 81 81 81 81 81Max deliverable oil viscosity 80 80 80 80 80 80 80 80 130 130 130Bung adaptor - standard standard standard - standard - standard - - standard
Suitable for drums or tanks
Packing 1 - 0,010 1 - 0,010 1 - 0,020 1 - 0,020 1 - 0,006 1 - 0,006 1 - 0,020 1 - 0,020 1 - 0,010 1 - 0,020 1 - 0,020Weight 5,5 6 7,2 7,2 4,3 5 6,2 6,3 5,3 7,3 7,4
Dimensions (A - B - C) 33,2 - 20,8 - 5 33,2 - 16,8 - 5 33,2 - 74 - 5 33,2 - 94 - 5 35,5 - 0 - 0 35,5 - 22 - 4,2 35,5 - 94 - 4,2 35,5 - 94 - 4,2 50,5 - 0 - 0 50,5 - 94 - 4,2 50,5 - 94 - 4,2
Air-operated pumpsfor TRANSFER
A
B
C
modular customisable 1”suitable for drums
50-60 Kgsuitable for drums
180-220 Kg
Air-operated pumps for short and medium-distance transfer. Ideal for transferring low-medium viscosity fluids such as: oils, lubricants and similar products.The wall-mounted version of these pumps, mounted on wall or in a fixed position by means of the special accessories (refer to page 107), enables numerous uses through the application of modular extensions (refer to page 112).
A
B
C
A
B
C
8 (116)
6(87)
4(58)
0l/min
(gpm) 9,0
(2,4) 18
(4,8) 27
(7,2) 36
(9,5)
0,44
0,34
0,25
bar(psi)
cycles/min m3/min
FLUI
D OU
TLET
PRE
SSUR
E
AIR
CONS
UMPT
ION
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
0
NBR
VITON
TEFLON
bspbspbar
l/mindB
SAE
N° - m3
Kgcm
A A
8 bar116 psi
B B
6 bar 87 psi
C C 4 bar 58 psi
60 120 180 240
70
HIGH FLOW RATESHORT DISTANCE
PUMP AIRFEEDING
PRESSURE
500series
Ratio 1:1 Flow rate 35 l/min
Article with seals in 33080 33081 33082 33083
Article with seals in 26090 26091 26093 26094 33070 33071 33072 33073 33170 33172 33173
Article with seals in 33060 33061 33094 33096 33160 33194 33196Compatible fluids Oils, lubricants and similar Oils, lubricants and similar Oils, lubricants and similarSuction tube upper body Aluminium Aluminium AluminiumSuction tube Carbon steel Carbon steel Carbon steelAir inlet connection F 1/4” G F 1/4” G F 1/4” G F 1/4” G F 1/4” G F 1/4” G F 1/4” G F 1/4” G F 1/4” G F 1/4” G F 1/4” GFluid outlet connection F 3/4” G F 3/4” G F 3/4” G F 3/4” G F 1/2” G F 1/2” G F 1/2” G F 1/2” G F 3/4” G F 3/4” G F 3/4” GAir working pressure 6 - 8 6 - 8 6 - 8 6 - 8 6 - 8 6 - 8 6 - 8 6 - 8 6 - 8 6 - 8 6 - 8Average air consumption 250 250 250 250 230 230 230 230 370 370 370Noise level 81 81 81 81 81 81 81 81 81 81 81Max deliverable oil viscosity 80 80 80 80 80 80 80 80 130 130 130Bung adaptor - standard standard standard - standard - standard - - standard
Suitable for drums or tanks
Packing 1 - 0,010 1 - 0,010 1 - 0,020 1 - 0,020 1 - 0,006 1 - 0,006 1 - 0,020 1 - 0,020 1 - 0,010 1 - 0,020 1 - 0,020Weight 5,5 6 7,2 7,2 4,3 5 6,2 6,3 5,3 7,3 7,4
Dimensions (A - B - C) 33,2 - 20,8 - 5 33,2 - 16,8 - 5 33,2 - 74 - 5 33,2 - 94 - 5 35,5 - 0 - 0 35,5 - 22 - 4,2 35,5 - 94 - 4,2 35,5 - 94 - 4,2 50,5 - 0 - 0 50,5 - 94 - 4,2 50,5 - 94 - 4,2
modularsuitable for drums
180-220 Kgcustomisable 1” modularsuitable for drums
180-220 Kg
l/min(gpm)
6,0(1,6)
12(3,2)
18(4,8)
24(6,4)
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
bar(psi)
cycles/min m3/min
8 (116)
6(87)
4(58)
0
0,41
0,32
0,23
FLUI
D OU
TLET
PRE
SSUR
E
AIR
CONS
UMPT
ION
0
A A
8 bar116 psi
B
C C 4 bar 58 psi
B
6 bar 87 psi
A A
8 bar116 psi
B
C C 4 bar 58 psi
B
6 bar 87 psi
62 125 187 250
A
B
C
A
B
C
8 (116)
6(87)
4(58)
0l/min
(gpm)10,5 (2,8)
21(5,5)
31,5 (8,3)
42 (11)
0,68
0,53
0,38
bar(psi)
cycles/min m3/min
FLUI
D OU
TLET
PRE
SSUR
E
AIR
CONS
UMPT
ION
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
0
A
B
C
A
B
C
38 75 112 150
suitable for drums 180-220 Kg
suitable for drums 180-220 Kg
71
PUMP AIRFEEDING
PRESSURE
PUMP AIRFEEDING
PRESSURE
600series 650serie
Ratio 1:1 Flow rate 40 l/minRatio 1:1 Flow rate 23 l/min
Article with seals in 35160 35161 35163 35173 35194
Article with seals in 35176 35196
Article with seals in 35060 35061 35063 35076 35094Compatible fluids Oils, lubricants and similar Oils, lubricants and similar Oils, lubricants and similarSuction tube upper body Aluminium Aluminium AluminiumSuction tube Carbon steel Carbon steel Carbon steelAir inlet connection F 1/4” G F 1/4” G F 1/4” G F 1/4” G F 1/4” G F 1/4” G F 1/4” G F 1/4” G F 1/4” G F 1/4” GFluid outlet connection F 1/2” G F 1/2” G F 1/2” G F 1/2” G F 1/2” G F 1/2” G F 1/2” G F 1/2” G F 1/2” G F 1/2” GAir working pressure 4 - 8 4 - 8 4 - 8 4 - 8 4 - 8 6 - 8 6 - 8 6 - 8 6 - 8 6 - 8Average air consumption 350 350 350 350 350 330 330 330 330 330Noise level 81 81 81 81 81 81 81 81 81 81Max deliverable oil viscosity 130 130 130 130 130 130 130 130 130 130Bung adaptor - standard standard standard standard - standard standard standard on 35176 standard on 35196
Suitable for drums or tank
Packing 1 - 0,01 1 - 0,01 1 - 0,01 1 - 0,01 1 - 0,01 1 - 0,01 1 - 0,01 1 - 0,02 1 - 0,020 1 - 0,020Weight 5,35 5,8 5,8 5,8 6,5 4,4 5,0 6,8 5,8 6,5
Dimensions (A - B - C) 33,2 - 20 - 3,2 33,2 - 18,5 - 3,2 33,2 - 125 - 3,2 33,2 - 74 - 3,2 33,2 - 94 - 3,2 28,5 - 28,5 - 4,2 28,5 - 22 - 4,2 28,5 - 125 - 4,2 28,5 - 74 - 4,2 28,5 - 94 - 4,2
Air-operated pumpsfor DISTRIBUTION
A
B
C
NBR
NBR
VITON
bspbspbar
l/mindB
SAE
N° - m3
Kgcm
Air-operated pumps series 500 and 600 for medium distance distribution. Ideal for transferring low-medium viscosity fluids such as: oils, lubricants and similar products. Suitable for mobile unit or fixed installation. The wall-mounted version of these pumps, mounted on wall or in a fixed position by means of the special accessories (refer to page 107), enables numerous uses through the application of modular extensions (refer to page 112).
modular customisable 1” tank
24 (348)
18 (261)
12(174)
0l/min
(gpm) 5,0 (1,3)
10(2,7)
15 (4,0)
20(5,3)
0,65
0,51
0,36
bar(psi)
cycles/min m3/min
FLUI
D OU
TLET
PRE
SSUR
E
AIR
CONS
UMPT
ION
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
0
A
B
C
A
B
C
80 160 240 320
72
MEDIUM PRESSUREMEDIUM-LONG DISTANCE
A A
8 bar116 psi
B B
6 bar 87 psi
C C 4 bar 58 psi
PUMP AIRFEEDING
PRESSURE
500series
Ratio 3:1 Flow rate 20 l/min
Article with seals in 35160 35161 35163 35173 35194
Article with seals in 35176 35196
Article with seals in 35060 35061 35063 35076 35094Compatible fluids Oils, lubricants and similar Oils, lubricants and similar Oils, lubricants and similarSuction tube upper body Aluminium Aluminium AluminiumSuction tube Carbon steel Carbon steel Carbon steelAir inlet connection F 1/4” G F 1/4” G F 1/4” G F 1/4” G F 1/4” G F 1/4” G F 1/4” G F 1/4” G F 1/4” G F 1/4” GFluid outlet connection F 1/2” G F 1/2” G F 1/2” G F 1/2” G F 1/2” G F 1/2” G F 1/2” G F 1/2” G F 1/2” G F 1/2” GAir working pressure 4 - 8 4 - 8 4 - 8 4 - 8 4 - 8 6 - 8 6 - 8 6 - 8 6 - 8 6 - 8Average air consumption 350 350 350 350 350 330 330 330 330 330Noise level 81 81 81 81 81 81 81 81 81 81Max deliverable oil viscosity 130 130 130 130 130 130 130 130 130 130Bung adaptor - standard standard standard standard - standard standard standard on 35176 standard on 35196
Suitable for drums or tank
Packing 1 - 0,01 1 - 0,01 1 - 0,01 1 - 0,01 1 - 0,01 1 - 0,01 1 - 0,01 1 - 0,02 1 - 0,020 1 - 0,020Weight 5,35 5,8 5,8 5,8 6,5 4,4 5,0 6,8 5,8 6,5
Dimensions (A - B - C) 33,2 - 20 - 3,2 33,2 - 18,5 - 3,2 33,2 - 125 - 3,2 33,2 - 74 - 3,2 33,2 - 94 - 3,2 28,5 - 28,5 - 4,2 28,5 - 22 - 4,2 28,5 - 125 - 4,2 28,5 - 74 - 4,2 28,5 - 94 - 4,2
suitable for drums 50-60 Kg
suitable for drums 180-220 Kg modular
suitable for drums 50-60 Kgcustomisable 1”
suitable for drums 180-220 Kgtank
A
B
C
A
B
C
20 (290)
15(217)
10(145)
0l/min
(gpm) 3,5
(0,9) 7
(1,8)10,5
(2,7) 14
(3,7)
0,62
0,48
0,35
bar(psi)
cycles/min m3/min
FLUI
D OU
TLET
PRE
SSUR
E
AIR
CONS
UMPT
ION
TIPO DI FLUIDO: SAE30 oil (ISO VG 100) - 20 °C
0
95 190 285 380 24
(348)
18 (261)
12(174)
0l/min
(gpm) 5,0 (1,3)
10(2,7)
15 (4,0)
20(5,3)
0,65
0,51
0,36
bar(psi)
cycles/min m3/min
FLUI
D OU
TLET
PRE
SSUR
E
AIR
CONS
UMPT
ION
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
0
A
B
C
A
B
C
80 160 240 320
73
A A
8 bar116 psi
B B
6 bar 87 psi
C C 4 bar 58 psi
PUMP AIRFEEDING
PRESSURE
500series 600series
Ratio 3:1 Flow rate 14 l/min
Air-operated pumpsfor DISTRIBUTION
Article with seals in 36060 36061 36063 36073 36094
Article with seals in 36076 36096Compatible fluids Medium/high-viscosity oil Medium/high-viscosity oilSuction tube upper body Aluminium AluminiumSuction tube Carbon steel Carbon steelAir inlet connection F 1/4” G F 1/4” G F 1/4” G F 1/4” G F 1/4” GFluid outlet connection F 1/2” G F 1/2” G F 1/2” G F 1/2” G F 1/2” GAir working pressure 6 - 8 6 - 8 6 - 8 6 - 8 6 - 8Average air consumption 350 350 350 350 350Noise level 81 81 81 81 81Max deliverable oil viscosity 240 240 240 240 240Bung adaptor - standard standard standard on 36076 standard on 36096
Suitable for drums or tanks
Packing 1 - 0,01 1 - 0,01 1 - 0,02 1 - 0,02 1 - 0,02Weight 4,7 5,2 7,2 6,2 6,8
Dimensions (A - B - C) 34,5 - 27 - 4,2 34,5 - 27 - 4,2 34,5 - 125 - 4,2 34,5 - 74 - 4,2 34,5 - 94 - 4,2
NBR
NBR
bspbspbar
l/mindB
SAE
N° - m3
Kgcm
Series 650 air-operated double-acting pumps for mediumdistance oil distribution. Ideal for also distributing high viscosity oil. The double action guarantees the delivery of a continuous and constant flow, ideal for all installations, excellent for centralised distribution systems. The wall-mounted version of these pumps,mounted on wall or in a fixed position by means of the special accessories (refer to page 107), enables numerous uses through the application of modular extensions (refer to page 112).
A
B
C
modular customisable 1” tank
35 (507)
26(377)
17(246)
0l/min
(gpm) 4,5
(1,2) 9
(2,4)13,5(3,6)
18(4,8)
0,72
0,56
0,40
bar(psi)
cycles/min m3/min
FLUI
D OU
TLET
PRE
SSUR
E
AIR
CONS
UMPT
ION
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
0
A
B
C
A
B
C
40 80 120 160
74
MEDIUM PRESSUREMEDIUM-LONG DISTANCE
A A
8 bar116 psi
B B
6 bar 87 psi
C C 4 bar 58 psi
PUMP AIRFEEDING
PRESSURE
650series
Ratio 5:1 Flow rate 18 l/min
Advantages of double-actionThere are many technical solutions for obtaining a reciprocating double-acting pump.The double-action of RAASM pumps is obtained with solutions that have simplified the pump mechanism itself, ensuring that delivery of the fluid in both alternating movements (upstroke and downstroke) of the pump occurs only through the difference in volume between the diameters of the pumping piston (A) and the pump shaft (B).
On the upstroke, delivery is caused by the pumping piston (A).
On the downstroke it is caused by the difference in volume between the diameter of the motor shaft (B) and the diameter of the pumping piston (A).
In addition to guaranteeing regular delivery of the fluid, this solution offers the further advantage of having fewer parts inside the pump. This means less wear plus greater and longer reliability.
Upstroke
Silencer
Recycle tube
Liquid outlet
Pumpingpiston valve closed
Foot valve open
Downstroke
Pumpingpiston valve open
Air distributor
Air inlet
Motor piston
Upper chamber
Pumping piston (A)
Lower chamber
Motor shaft (B)
Foot valve closedsuitable for drums 50-60 Kg
suitable for drums 180-220 Kg
35 (507)
26(377)
17(246)
0l/min
(gpm) 4,5
(1,2) 9
(2,4)13,5(3,6)
18(4,8)
0,72
0,56
0,40
bar(psi)
cycles/min m3/min
FLUI
D OU
TLET
PRE
SSUR
E
AIR
CONS
UMPT
ION
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
0
A
B
C
A
B
C
40 80 120 160
Article with seals in 36060 36061 36063 36073 36094
Article with seals in 36076 36096Compatible fluids Medium/high-viscosity oil Medium/high-viscosity oilSuction tube upper body Aluminium AluminiumSuction tube Carbon steel Carbon steelAir inlet connection F 1/4” G F 1/4” G F 1/4” G F 1/4” G F 1/4” GFluid outlet connection F 1/2” G F 1/2” G F 1/2” G F 1/2” G F 1/2” GAir working pressure 6 - 8 6 - 8 6 - 8 6 - 8 6 - 8Average air consumption 350 350 350 350 350Noise level 81 81 81 81 81Max deliverable oil viscosity 240 240 240 240 240Bung adaptor - standard standard standard on 36076 standard on 36096
Suitable for drums or tanks
Packing 1 - 0,01 1 - 0,01 1 - 0,02 1 - 0,02 1 - 0,02Weight 4,7 5,2 7,2 6,2 6,8
Dimensions (A - B - C) 34,5 - 27 - 4,2 34,5 - 27 - 4,2 34,5 - 125 - 4,2 34,5 - 74 - 4,2 34,5 - 94 - 4,2
75
650series
Stainless steel AISI 304 pumps for TRANSFER
Article with seals in 33360 33396 33300Compatible fluids Suitable for antifreeze and windshield washing liquidSuction tube lower body Stainless steel AISI 304Suction tube Stainless steel AISI 304Air inlet connection F 1/4” G F 1/4” G -Fluid outlet connection F 1/2” G F 1/2” G -Air working pressure 6 - 8 6 - 8 -Average air consumption 370 370 -Noise level 81 81 -Max deliverable oil viscosity 50 50 -Bung adaptor - standard 33434
Suitable for drums or tanks
Packing 1 - 0,10 1 - 0,020 1 - 0,29Weight 5,3 7,4 11,4
Dimensions (A - B - C) 41 - 0 - 0 41 - 94 - 3,4 41 - 94 - 3,4
A
B
C
modularsuitable for drums
180-220 Kg
A A
8 bar116 psi
B B
6 bar 87 psi
C C 4 bar 58 psi
VITON
bspbspbar
l/mindB
SAE
N° - m3
Kgcm
Art. 33434
Art. 33360
Art. 33115
Art. 33427
Art. 33426 8 (116)
6(87)
4(58)
0l/min
(gpm) 7,5
(2,1) 15
(4,1)22,5(6,2)
30(8,3)
0,65
0,51
0,36
bar(psi)
cycles/min m3/min
FLUI
D OU
TLET
PRE
SSUR
E
AIR
CONS
UMPT
ION
KIND OF FLUID: windshiel washing liquid
0
A
B
C
A
B
C
100 200 300 400
Stainless steel AISI 304 air-operated pumps for short-medium distance transfer. Ideal for transferring low-mediumviscosity fluids such as: antifreeze liquid, windshield washing liquid and chemical products.
modular
76
HIGH FLOW RATESHORT DISTANCE
PUMP AIRFEEDING
PRESSURE
600 INOXseries
Ratio 1:1 Flow rate 30 l/min
Art. 33440 Gun for antifreeze and windshield liquidapplicable to kit Art. 33300equipped with:- inlet joint F 1/2”- stainless steel rigid terminal with free outlet
Article with membrane in 33/2011NHHV2 33500 33505Compatible fluids Water, mineral-vegetable oils, diesel oilPump material AluminiumBall valve material HytrelAir inlet connection F 3/8” G F 3/8” G F 3/8” GFluid inlet-outlet connection F 3/4” x F3/4” G suction tube ø 34 mm - F 3/4” G suction tube ø 34 mm - F 3/4” GAir working pressure 2 - 6 2 - 6 2 - 6Air max pressure 8 8 8Average air consumption 500 500 500Noise level 75 75 75Fluid temperature -10 +90 -10 +90 -10 +90Max solids diameter ø 1,5 ø 1,5 ø 1,5
Suitable for drums or tanks
Suction-delivery ball valvewith spring
Packing 1 - 0,015 2 - 0,040 2 - 0,040Weight 8 10 11
Dimensions (A - B - C) 16 - 20 - 25,6 16 - 20 - 25,6 16 - 20 - 25,6Suction tube length and ø - 94x3,4 124x3,4
NBR High Nitrile
bspbspbarbar
l/mindB°C
mm
N° - m3
Kgcmcm
The transfer diaphragm pumps, specific for oil and similar products in die-cast aluminium, with high-quality components, ensure lasting and reliable operation even in extreme conditions. Ideal for transferringfluids even in the presence of suspended solids.
suitable for drums 180-220 Kg tankmodular
C 8
(116)
6(87)
4(58)
0l/min
(gpm) 20
(5,4) 40
(10,7)56
(15) 76
(20,4)
0,65
0,46
0,29
bar(psi)
cycles/min m3/min
FLUI
D OU
TLET
PRE
SSUR
E
AIR
CONS
UMPT
ION
0
105 210 315 420
KIND OF FLUID: cold water 15°C
SAE 30 oil (ISO VG 100) 20°C
A
B
C
A
B
C
3/4” Ratio 1:1 Flow rate 70 l/minDIAPHRAGM PumpsS. 340-ABin aluminium
77
HIGH FLOW RATESHORT DISTANCE
BA
A A
8 bar116 psi
B B
6 bar 87 psi
C C 4 bar 58 psi
PUMP AIRFEEDING
PRESSURE
340-ABseries
Article with membrane in 33/2611NHHV2 33/3011NHHV2
Compatible fluidsWater, mineral-vegetable oils,
diesel oilWater, mineral-vegetable oils,
diesel oil
Pump material Aluminium AluminiumBall valve material Hytrel HytrelAir inlet connection F 3/8” G F 3/4” GFluid inlet-outlet connection F 1.1/4” x F 1” G F 1.1/4” x F 1.1/4” GAir working pressure 2 - 6 2 - 6Air max pressure 8 8Average air consumption 1200 1400Noise level 75 75Fluid temperature -10 +90 -10 +90Max solids diameter ø 3 ø 3
Suction-delivery ball valvewith spring
Packing 1 - 0,025 1 - 0,041Weight 14 16
Dimensions (A - B - C) 20 - 26 - 34,5 23,8 - 28,6 - 38,6
NBR High Nitrile
bspbspbarbar
l/mindB°C
mm
N° - m3
Kgcm
The transfer diaphragm pumps, specific for oil and similar products in die-cast aluminium, with high-quality components, ensure lasting and reliable operation even in extreme conditions. Ideal for transferring fluids even in the presence of suspended solids.
8 (116)
6(87)
4(58)
0l/min
(gpm)45
(12) 90(24)
144 (36)
180 (48)
1,60
1,20
0,72
bar(psi)
cycles/min m3/min
FLUI
D OU
TLET
PRE
SSUR
E
AIR
CONS
UMPT
ION
KIND OF FLUID: cold water 20 °C
0
75 150 225 300
SAE 30 oil (ISO VG 100) 20°C
A
B
C
A
B
C
8 (116)
6(87)
4(58)
0l/min
(gpm)50
(13,5) 100(27)
150 (41)
200 (58)
1,80
1,35
0,63
bar(psi)
cycles/min m3/min
FLUI
D OU
TLET
PRE
SSUR
E
AIR
CONS
UMPT
ION
KIND OF FLUID: cold water 20 °C
0
65 130 195 260
SAE 30 oil (ISO VG 100) 20°C
A
B
C
A
B
C
1” Ratio 1:1Flow rate 170 l/min
1.1/4” Ratio 1:1Flow rate 200 l/min
DIAPHRAGMPumpsS. 1000-AB - 1140-ABin aluminium
78
HIGH FLOW RATESHORT DISTANCE
C
BA
A A
8 bar116 psi
B B
6 bar 87 psi
C C 4 bar 58 psi
A A
8 bar116 psi
B B
6 bar 87 psi
C C 4 bar 58 psi
PUMP AIR FEEDING PRESSURE PUMP AIR FEEDING PRESSURE
1000-ABseries 1140-ABseries
Article with membrane 2B3/16117NH22 2B8/16117NH22
Article with membrane 2B3/16117TT22 2B8/16117TT22
Compatible fluidsWater, mineral-vegetable oils,
diesel oil
Windshield washing liquid and antifreeze
Water, mineral-vegetable oils,
diesel oil
Windshield washing liquid and antifreeze
Motor and inside flanges material Aluminium Aluminium Aluminium AluminiumWetted parts Polypropylene Polypropylene Polypropylene PolypropyleneBall valve material Hytrel Teflon Hytrel TeflonAir inlet connection F 3/8” G F 3/8” G F 3/8” G F 3/8” GFluid inlet-outlet connection F 3/4” x F 1/2” G F 3/4” x F 1/2” G F 3/4” x F 1/2” G F 3/4” x F 1/2” GAir working pressure 2 - 6 2 - 6 2 - 6 2 - 6Air max pressure 8 8 8 8Average air consumption 400 400 400 400Noise level 75 75 75 75Fluid temperature -10 +65 -10 +65 -10 +65 -10 +65Max solids diameter ø 1,5 ø 1,5 ø 1,5 ø 1,5
Suction-delivery ball valvewith spring
Packing 1 - 0,015 1 - 0,015 1 - 0,015 1 - 0,015Weight 7,5 7,5 7 7
Dimensions (A - B - C) 17,8 - 21,8 - 32,6 17,8 - 21,8 - 32,6 17,8 - 22 - 32,6 17,8 - 22 - 32,6
NBR High Nitrile
PTFE
bspbspbarbar
l/mindB°C
mm
N° - m3
Kgcm
Diaphragm pumps are used in different kind of application. They can be installed on wall brackets, on trailers, on moving machines, on drums, on big reservoirs and in many other places. Ideal for transferring fluids even in the presence of suspended solids. Double inlet version is suitable to mix together two different kind of liquids i. e. water and antifreeze.
C 8 (116)
6(87)
4(58)
0l/min
(gpm)15
(4) 30(8)
45 (12)
60 (16)
0,53
0,37
0,21
bar(psi)
cycles/min m3/min
FLUI
D OU
TLET
PRE
SSUR
E
AIR
CONS
UMPT
ION
KIND OF FLUID: cold water 20 °C
0
85 170 225 340
SAE 30 oil (ISO VG 100) 20°C
A
B
C
A
B
C
1/2” Ratio 1:1 Flow rate 60 l/min
DIAPHRAGMPumpsS. 120-PBin polypropylene
BA
79
HIGH FLOW RATESHORT DISTANCE
A A
8 bar116 psi
B B
6 bar 87 psi
C C 4 bar 58 psi
PUMP AIR FEEDING PRESSURE
120-PBseries 120-PBseries
double inlet
Article with seals in 90C/51 90C/71 91C/71 92C/71 90C/111 91C/111 92C/111Compatible fluids Oils, lubricants and similar Oils, lubricants and similar Oils, lubricants and greaseSuction tube upper body Aluminium Aluminium AluminiumSuction tube Carbon steel Carbon steel Carbon steelAir inlet connection F 1/2” F 1/2” F 1/2” F 1/2” F 1/2” F 1/2” F 1/4”Fluid outlet connection F 3/4” F 3/4” F 3/4” F 3/4” F 3/4” F 3/4” F 3/4”Air max pressure 8 8 8 8 8 8 8Max air consumption 8 bar 1,6 1,6 1,6 1,6 1,7 1,7 1,7Noise level 80 80 80 80 80 80 80
Suitable for drums or tanks
Packing 1 - 0,040 1 - 0,040 1 - 0,070 1 - 0,080 1 - 0,040 1 - 0,070 1 - 0,070Weight 12 11 13 15 11 16 15
Dimensions (A - B - C) 43 - 23 - 6,2 43 - 27 - 5,3 43 - 94 - 5,3 43 - 126 - 5,3 43 - 27 - 4,5 43 - 94 - 4,5 43 - 74 - 4,5
Air-operated pumpsfor DISTRIBUTION
PU
bspbspbar
m3/mindB
N° - m3
Kgcm
36 (522)
24(348)
16(232)
0l/min
(gpm) 11,25
(3,0) 22,50
(5,9) 33,75
(9,0) 45,00(11,9)
1,8
1,3
1,0
bar(psi)
cycles/min m3/min
FLUI
D OU
TLET
PRE
SSUR
E
AIR
CONS
UMPT
ION
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
0
50 100 150 200
B
A
B
C
A
B
C
modular
C
A
B
Series 900 industrial air-operated double-acting pumps for distribution.Suitable for transferring oils, lubricants and similar products also with very high viscosity.The double action guarantees the delivery of a continuous and constant flow, ideal for all needs. Particularly effective in systems equipped with several distribution points.
80
A A
8 bar116 psi
B B
6 bar 87 psi
C C 4 bar 58 psi
PUMP AIRFEEDING
PRESSURE
900series
MEDIUM PRESSUREMEDIUM-LONG DISTANCE
Ratio 5:1 Flow rate 45 l/min
Article with seals in 90C/51 90C/71 91C/71 92C/71 90C/111 91C/111 92C/111Compatible fluids Oils, lubricants and similar Oils, lubricants and similar Oils, lubricants and greaseSuction tube upper body Aluminium Aluminium AluminiumSuction tube Carbon steel Carbon steel Carbon steelAir inlet connection F 1/2” F 1/2” F 1/2” F 1/2” F 1/2” F 1/2” F 1/4”Fluid outlet connection F 3/4” F 3/4” F 3/4” F 3/4” F 3/4” F 3/4” F 3/4”Air max pressure 8 8 8 8 8 8 8Max air consumption 8 bar 1,6 1,6 1,6 1,6 1,7 1,7 1,7Noise level 80 80 80 80 80 80 80
Suitable for drums or tanks
Packing 1 - 0,040 1 - 0,040 1 - 0,070 1 - 0,080 1 - 0,040 1 - 0,070 1 - 0,070Weight 12 11 13 15 11 16 15
Dimensions (A - B - C) 43 - 23 - 6,2 43 - 27 - 5,3 43 - 94 - 5,3 43 - 126 - 5,3 43 - 27 - 4,5 43 - 94 - 4,5 43 - 74 - 4,5
l/min(gpm)
7,50(2,0)
15,00(4,0)
22,50(6,0)
30,00(7,9)
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
bar(psi)
cycles/min m3/min
54 (783)
40(580)
26(377)
0
1,8
1,3
1,0
FLUI
D OU
TLET
PRE
SSUR
E
AIR
CONS
UMPT
ION
0
50 100 150 200 82
(1189)
58(841)
36(522)
0l/min
(gpm)7,5
(2,0) 15
(4,1)22,5
(6,3) 30,00
(8,2)
1,9
1,4
1,0
bar(psi)
cycles/min m3/min
FLUI
D OU
TLET
PRE
SSUR
E
AIR
CONS
UMPT
ION
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
0
65 130 195 260
modular
B
C
A
B
C
A
modular
B
C
A
B
C
A
suitable for drums180-220 Kg
suitable for drums180-220 Kg
suitable for drums50-60 Kgtank
81
A A
8 bar116 psi
B B
6 bar 87 psi
C C 4 bar 58 psi
PUMP AIRFEEDING
PRESSUREA A
8 bar116 psi
B B
6 bar 87 psi
C C 4 bar 58 psi
PUMP AIRFEEDING
PRESSURE
900series 900series
Ratio 11:1 Flow rate 30 l/minRatio 7:1 Flow rate 30 l/min