10
25
Industry leading warranty based on Nominal Power
Industry leading linear warranty
War
rant
ed P
ower
Out
put
100%
80%
1 10 25
90%
97.5%
80.7%
97.5% in the first year, thereafter, for years two (2) through twenty-five (25),0.7% maximum decrease from module’s nominal power output per year, endingwith the 80.7% in the 25th year after the defined WARRANTY STARTING DATE.**
10 year product warranty.
25 year linear performance warranty.
* Based on ongoing testing.** Please refer to Saatvik Product Warranty for details.
THE SAATVIK EDGE
ISO 9001:2015 / Quality management system
ISO 14001:2015 / Standards for environmental management system
Management System Certificates
OHSAS 18001:2007 / International standards for occupational health & safety
ISO14001 : 2015
Certified Company
Product Certificates *IEC 61215 / IEC 61730: TUV RheinlandUL 1703IEC 61701 ED2IEC 62804 (PID)IEC 62716 (Ammonia)
IS14286IS61730-1 and 2IEC60068
www.saatvikgroup.com
72 CELLSMONO PERC
About Saatvik
Saatvik manufactures solar panels of high module conversion efficiency that provide outstanding power performance even at low irradiance. With 25-year linear power performance warranty and 10-years workmanship warranty, Saatvik extends the mission to lead India in to a future that is sustainable and flourishing in energy and environment.
72 CELLMONO PERC MODULE
365-375 WpPOWER OUTPUT RANGE
19.35%MODULE EFFICIENCY
0~+5WPOSITIVE POWER TOLERANCE
365 Wp | 370 Wp | 375 Wp
High module conversion efficiencyModule efficiency up to 19.35%achieved
High PID resistantAdvanced cell technology andqualified materials lead to highresistance to PID
Extended wind and snow load tests Module certified to withstand extreme wind (2400 Pascal) and snow loads (5400 pascal)
Low irradiance Outstanding low irradianceperformance: 96.0%
Saatvik current sorting processSystem output maximized byreducing mismatch losses withmodules sorted and packaged byamperage
IP67 Rated junction box1P67 junction box for long-termweather endurance
Postive tolerancePositive tolerance of up to5W delivers higher output relaibility
Rigorous testing criteria100% EL inspection ensuringdefect-free modules
Good temperature coefficientEnables higher output in hightemperature regions
World class momo efficiency
Copyright © Saatvik Green Energy Pvt. Ltd. All Rights Reserved
14 x 9 ±0.5mm
14 x 9 ±0.5mm
Ø
6.0±0.2mm
35 mm
12.5mm
991mm±0.5mm
946mm±0.5mm
74 mm
978±0.5mm
74 m
m
180±0.5mm
15 15 180±0.5mm
1955 ±0.5mm
H 35mm
Current-Voltage & Power-Voltage Curve
1000 W/m²
800 W/m²
600 W/m²
400 W/m²
200 W/m²
25°C300
250
200
150
100
50
0
Curr
ent/
A
Pow
er/W
Voltage/V
Excellent performance under weak light conditions: at an irradiationintensity of 200 W/m2 (AM 1.5,25 °C ), 96.0% or higher of the STCefficiency (1000 W/m2) is achieved
PARTNER SECTION
Temperature CharacteristicsNominal Operating Cell Temperature (NOCT)
Temperature Coefficient of Pmax
Temperature Coefficient of Voc
Temperature Coefficient of Isc
45±2%/°C
-0.380%/°C
-0.300%/°C
+0.060%/°C
Electrical CharacteristicsMaximum Power at STC (Pmax)
Optimum Operating Voltage (Vmp)
Optimum Operating Current (Imp)
Open Circuit Voltage (Voc)
Short Circuit Current (Isc)
Module Efficiency
Operating Module Temperature
Maximum System Voltage
Maximum Series Fuse Rating
Power Tolerance
-40 °C to +85°C
1000/1500 V DC (IEC)
15A
0/+5W
375 W
41.25 V
9.10 A
48.60 V
9.51 A
19.35%
SGE375-72M
370 W
41.04 V
9.02 A
48.38 V
9.45 A
19.09%
SGE370-72M
365 W
40.83 V
8.94 A
48.16 V
9.39 A
18.84%
SGE365-72M
STC: Irradiance 1000 W/m2, module temperature 25°C, Am=1.5;Best in Class AAA solar simulator (IEC 60904-9) used, power measurement uncertainty is within +/- 3%
NOCT: Irradiance 800 W/m2, ambient temperature 20°C, Am=1.5, Wind speed 1 m/s;
276 W
36.76 V
7.51 A
44.82 V
7.9 A
SGE375-72M
272 W
36.51 V
7.46 A
44.54 V
7.85 A
SGE370-72M
268 W
36.25 V
7.4 A
44.32 V
7.79 A
SGE365-72M
Toll Free No. : 1800-1801051 Email: [email protected] Website: www.saatvikgroup.com
72 CELLS MONO PERC
NOCTMaximum Power at NOCT (Pmax)
Optimum Operating Voltage (Vmp)
Optimum Operating Current (Imp)
Open Circuit Voltage (Voc)
Short Circuit Current (Isc)
Module | Mechanical Data
Specification
PERC Mono-crystalline, 72 Cells (6x12)
1955x991x35 mm
20.7 kgs
3.2 mm Tempered Glass
EVA
Composite Film
Silver Anodized Aluminium Profile,(black frame on request)
IP67, 3 diodes
1.2 Meters, 4 mm²
MC4 Compatible Connector IEC/UL Certified
30x1 Pieces, 650 kg(quantity and weight per palette)
720 pieces (40* HQ)
Cell Type
Dimensions
Weight
Front Cover
Cell Encapsulation
Backsheet
Frame Material
J-Box
Cable
Connectors
Standard Packaging
Module Pieces per container
Data
Information on how to install and operate this product is available in the installation instruction. All values indicated in this data sheet are subject to change without prior announcement. The specifications may vary slightly. All specifications are inaccordance with standard EN 50380. Colour differences of the modules relative to the figures as well as discolourations of/in modules which do not impair their proper functioning are possible and do not constitute aa deviation from the specification.
Copy
right
© S
aatv
ik G
reen
Ene
rgy
Pvt.
Ltd.
All
Righ
ts R
eser
ved
• Optimum panel efficiency suitable for roof-tops, ground mounted, solar water pumping for utility applications.
• Suitable for all environment conditions.