6
A More Efficient Coupling Technology Installation is Ten Times Faster G GRINNELL R RAPID I INSTALLATION P PIVOT-BOLT
| Date post: | 28-Nov-2015 |
| Category: |
Documents |
| Upload: | augusto-calderon |
| View: | 4 times |
| Download: | 1 times |
www.grinnell.comCopyright © 2012 Grinnell Products. All rights reserved.
GM-GRIPBRO-201210_EN
From residential, education and health care projects to large municipal, infrastructure and public works installations, GRINNEll Products span the full spectrum of industries. Architects, engineers, contractors and distributors worldwide have learned to trust Tyco for a long-term commitment to product innovation and technical support.
Grinnell solutions at work.
A More efficient Coupling Technology
Swing coupling housing over the pipe. There are no nuts or bolts to remove or untighten. The pivot-bolt quickly and easily guides the coupling body into the pipe.
TighTen one nut with an impact or hand wrench. There is no need to alternate tightening – the pivot-bolt comes calibrated and does not need adjusting.
For complete installation instructions, refer to the installation manual.
Here’s How iT works:
Lube gasket. Apply a thin layer of lubricant on the inner and outer sealing surfaces of the gasket.
PuSh gasket onto the pipe until the center leg of the gasket is in contact with the end of the pipe. Push the second pipe end into the gasket, ensuring it has made contact with the center leg. Easy visual inspection ensures that the gasket is properly positioned.
installation is Ten Times Faster
G GRINNELL
R RAPID
I INSTALLATION
P PIVOT-BOLT
Global locationsUnited states of america1400 Pennbrook ParkwayLansdale, PA 19446Tel: +800 558 5236Fax: +800 877 1295
United states of america1802 S.W. 2nd StreetPompano Beach, FL 33069Tel: +954 781 0866Fax: +954 781 9330
MexicoAv. Presidente Juarez 2007 Lote 6San Jeronimo Tepetlacalco,Tlalnepantla, Estado de MéxicoMexico 54090Tel: +525 55 321 2350Fax: +525 55 321 2358
singapore2 Serangoon North Avenue 5#07-01 Singapore 554911Tel: +65 6577 4360Fax: +65 6481 8791E-mail: [email protected]
australia Level 3, 95 Coventry StreetSouthbank, VIC 3006AustraliaTel: +1300 725 688 (within Australia)Fax: +1300 720 733 (within Australia)Tel: +61 3 9313 9700Fax: +61 3 9313 9709 E-mail: [email protected]
the netherlandsKopersteden 1P.O. Box 1987500 AD EnschedeTel: +31 0 53 428 4444Fax: +31 0 53 428 3377
United arab EmiratesPO Box 61355 Warehouse TB01, R/A 8Jebel Ali Free Zone, DubaiTel: +971 4 883 8689 Fax: +971 4 883 8674
india804, Windsor, Off C.S.T. Road Nr. Bandra Kurla Complex, KalinaSantacruzMumbai 400098, IndiaTel: +91 22 6131 0600 Fax: +91 22 6741 7405E-mail: [email protected]
china2F, Building No.1, Lane 955Jinhai Road, PudongShanghai 201206Tel: +86 21 6163 3373Fax: +86 21 6163 3371E-mail: [email protected]
Hong KongUnits 905-923, 9/F, Trade Square, 681, Cheung Sha Wan Road, Cheung Sha Wan, Kowloon, Hong KongTel: +852 2753 3524Fax: +852 2505 5826E-mail: [email protected]
shanghai2F, Building No.1, Lane 955Jinhai Road, PudongShanghai 201206Tel: +86 21 6163 3373Fax: +86 21 6163 3371E-mail: [email protected]
The new GRINNEll Rapid Installation Pivot-bolt (GRIP) Coupling joins pipe ten times faster than traditional methods and two times faster than standard grooved couplings without losing the ability to properly inspect the gasket seal. No other quick installation coupling offers both of these benefi ts.
The GRIP Coupling is a more effi cient, reliable way to join pipe. There are no loose components and only one bolt to tighten, meaning installation is quick and easy. The coupling also features a push-on style gasket allowing the installer to visually inspect for a proper seal. Correct gasket placement is crucial to the performance of a coupling. If the gasket is seated incorrectly the potential risk of a leak is signifi cantly higher. With GRIP couplings the installer never loses the ability to visually inspect the gasket.
GriP CoUPlinG BeneFiTs:
A More eFFiCienT CoUPlinG TeCHnoloGY
Reduced Costs – GRIP Couplings can be installed in one tenth the time of traditional joining methods and half the time of standard grooved couplings, reducing installation costs and project timelines signifi cantly.
Extreme Temperature and Pressure Ratings – GRIP Couplings can withstand pressures up to 750 psi (51,7 bar) and temperatures up to 250° F (121° C). Please see data sheet for the full listing of gasket temperature and pressure ratings.
Gasket Seal Confi rmation – The push-on style gasket is extremely fast to install, and the ability to visually inspect for a proper seal is never lost.
Safe Work Environment – No fumes or fl ames are present with a grooved system, omitting the safety risks involved with using hot works on a jobsite.
No Loose Components – The GRIP coupling design is installed without removing nuts or bolts. There is no risk of lost components to slow down the assembly process.For 160 years, professionals have turned to GRINNEll Mechanical
Products for innovative ideas like the GRIP Couplings, along with great
service, professional engineering and planning support. A 10-year
limited warranty – the industry’s longest and strongest – is backed by
our strength as a premier brand of Tyco International.
10 Ten-YeArwArrAnTY
Truly Rigid Design GRINNEll patented tongue and groove pad design offers a truly rigid connection as it grips the entire circumference of the pipe’s groove.
Consistent, Quality ConnectionsThe pivot-bolt feature provides an effortless, guided clamshell installation that is quick and consistent.
High Performance Gasket The EHT style gasket can handle temperatures up to 250° F (121° C). The center leg feature assists with proper placement of the gasket, so installation is quick and easy.
SPECIFICATIONS
10X FAsTer
G GRINNELL
R RAPID
I INSTALLATION
P PIVOT-BOLT
GRINNELL PRODUCT
FIGURE 640 GRIP RIGID COPPER COUPLING
FIGURE 740 GRIP RIGID COUPLING
APPLICATIONS Potable waterHVAC,Utility Piping, Process Piping
PIPE MATERIAL Hard-drawn Copper Tube
Carbon Steel, Schedule 10 (or heavier) Stainless Steel and Galvanized
GASKET GRADE “EHT” EPDM , NSF 61 approved
“EHT” EPDM and “T” Nitrile
MAXIMUM TEMPERATURE RATING
250° F / 121° C 250° F / 121° C
MAXIMUMPRESSURE RATING
300 psi / 20,7 bar 750 psi / 51,7 bar
GRIP COUPLINGS
The new GRINNEll Rapid Installation Pivot-bolt (GRIP) Coupling joins pipe ten times faster than traditional methods and two times faster than standard grooved couplings without losing the ability to properly inspect the gasket seal. No other quick installation coupling offers both of these benefi ts.
The GRIP Coupling is a more effi cient, reliable way to join pipe. There are no loose components and only one bolt to tighten, meaning installation is quick and easy. The coupling also features a push-on style gasket allowing the installer to visually inspect for a proper seal. Correct gasket placement is crucial to the performance of a coupling. If the gasket is seated incorrectly the potential risk of a leak is signifi cantly higher. With GRIP couplings the installer never loses the ability to visually inspect the gasket.
GriP CoUPlinG BeneFiTs:
A More eFFiCienT CoUPlinG TeCHnoloGY
Reduced Costs – GRIP Couplings can be installed in one tenth the time of traditional joining methods and half the time of standard grooved couplings, reducing installation costs and project timelines signifi cantly.
Extreme Temperature and Pressure Ratings – GRIP Couplings can withstand pressures up to 750 psi (51,7 bar) and temperatures up to 250° F (121° C). Please see data sheet for the full listing of gasket temperature and pressure ratings.
Gasket Seal Confi rmation – The push-on style gasket is extremely fast to install, and the ability to visually inspect for a proper seal is never lost.
Safe Work Environment – No fumes or fl ames are present with a grooved system, omitting the safety risks involved with using hot works on a jobsite.
No Loose Components – The GRIP coupling design is installed without removing nuts or bolts. There is no risk of lost components to slow down the assembly process.For 160 years, professionals have turned to GRINNEll Mechanical
Products for innovative ideas like the GRIP Couplings, along with great
service, professional engineering and planning support. A 10-year
limited warranty – the industry’s longest and strongest – is backed by
our strength as a premier brand of Tyco International.
10 Ten-YeArwArrAnTY
Truly Rigid Design GRINNEll patented tongue and groove pad design offers a truly rigid connection as it grips the entire circumference of the pipe’s groove.
Consistent, Quality ConnectionsThe pivot-bolt feature provides an effortless, guided clamshell installation that is quick and consistent.
High Performance Gasket The EHT style gasket can handle temperatures up to 250° F (121° C). The center leg feature assists with proper placement of the gasket, so installation is quick and easy.
SPECIFICATIONS
10X FAsTer
G GRINNELL
R RAPID
I INSTALLATION
P PIVOT-BOLT
GRINNELL PRODUCT
FIGURE 640 GRIP RIGID COPPER COUPLING
FIGURE 740 GRIP RIGID COUPLING
APPLICATIONS Potable waterHVAC,Utility Piping, Process Piping
PIPE MATERIAL Hard-drawn Copper Tube
Carbon Steel, Schedule 10 (or heavier) Stainless Steel and Galvanized
GASKET GRADE “EHT” EPDM , NSF 61 approved
“EHT” EPDM and “T” Nitrile
MAXIMUM TEMPERATURE RATING
250° F / 121° C 250° F / 121° C
MAXIMUMPRESSURE RATING
300 psi / 20,7 bar 750 psi / 51,7 bar
GRIP COUPLINGS
www.grinnell.comCopyright © 2012 Grinnell Products. All rights reserved.
GM-GRIPBRO-201210_EN
From residential, education and health care projects to large municipal, infrastructure and public works installations, GRINNEll Products span the full spectrum of industries. Architects, engineers, contractors and distributors worldwide have learned to trust Tyco for a long-term commitment to product innovation and technical support.
Grinnell solutions at work.
A More efficient Coupling Technology
Swing coupling housing over the pipe. There are no nuts or bolts to remove or untighten. The pivot-bolt quickly and easily guides the coupling body into the pipe.
TighTen one nut with an impact or hand wrench. There is no need to alternate tightening – the pivot-bolt comes calibrated and does not need adjusting.
For complete installation instructions, refer to the installation manual.
Here’s How iT works:
Lube gasket. Apply a thin layer of lubricant on the inner and outer sealing surfaces of the gasket.
PuSh gasket onto the pipe until the center leg of the gasket is in contact with the end of the pipe. Push the second pipe end into the gasket, ensuring it has made contact with the center leg. Easy visual inspection ensures that the gasket is properly positioned.
installation is Ten Times Faster
G GRINNELL
R RAPID
I INSTALLATION
P PIVOT-BOLT
Global locationsUnited states of america1400 Pennbrook ParkwayLansdale, PA 19446Tel: +800 558 5236Fax: +800 877 1295
United states of america1802 S.W. 2nd StreetPompano Beach, FL 33069Tel: +954 781 0866Fax: +954 781 9330
MexicoAv. Presidente Juarez 2007 Lote 6San Jeronimo Tepetlacalco,Tlalnepantla, Estado de MéxicoMexico 54090Tel: +525 55 321 2350Fax: +525 55 321 2358
singapore2 Serangoon North Avenue 5#07-01 Singapore 554911Tel: +65 6577 4360Fax: +65 6481 8791E-mail: [email protected]
australia Level 3, 95 Coventry StreetSouthbank, VIC 3006AustraliaTel: +1300 725 688 (within Australia)Fax: +1300 720 733 (within Australia)Tel: +61 3 9313 9700Fax: +61 3 9313 9709 E-mail: [email protected]
the netherlandsKopersteden 1P.O. Box 1987500 AD EnschedeTel: +31 0 53 428 4444Fax: +31 0 53 428 3377
United arab EmiratesPO Box 61355 Warehouse TB01, R/A 8Jebel Ali Free Zone, DubaiTel: +971 4 883 8689 Fax: +971 4 883 8674
india804, Windsor, Off C.S.T. Road Nr. Bandra Kurla Complex, KalinaSantacruzMumbai 400098, IndiaTel: +91 22 6131 0600 Fax: +91 22 6741 7405E-mail: [email protected]
china2F, Building No.1, Lane 955Jinhai Road, PudongShanghai 201206Tel: +86 21 6163 3373Fax: +86 21 6163 3371E-mail: [email protected]
Hong KongUnits 905-923, 9/F, Trade Square, 681, Cheung Sha Wan Road, Cheung Sha Wan, Kowloon, Hong KongTel: +852 2753 3524Fax: +852 2505 5826E-mail: [email protected]
shanghai2F, Building No.1, Lane 955Jinhai Road, PudongShanghai 201206Tel: +86 21 6163 3373Fax: +86 21 6163 3371E-mail: [email protected]
The new GRINNEll Rapid Installation Pivot-bolt (GRIP) Coupling joins pipe ten times faster than traditional methods and two times faster than standard grooved couplings without losing the ability to properly inspect the gasket seal. No other quick installation coupling offers both of these benefi ts.
The GRIP Coupling is a more effi cient, reliable way to join pipe. There are no loose components and only one bolt to tighten, meaning installation is quick and easy. The coupling also features a push-on style gasket allowing the installer to visually inspect for a proper seal. Correct gasket placement is crucial to the performance of a coupling. If the gasket is seated incorrectly the potential risk of a leak is signifi cantly higher. With GRIP couplings the installer never loses the ability to visually inspect the gasket.
GriP CoUPlinG BeneFiTs:
A More eFFiCienT CoUPlinG TeCHnoloGY
Reduced Costs – GRIP Couplings can be installed in one tenth the time of traditional joining methods and half the time of standard grooved couplings, reducing installation costs and project timelines signifi cantly.
Extreme Temperature and Pressure Ratings – GRIP Couplings can withstand pressures up to 750 psi (51,7 bar) and temperatures up to 250° F (121° C). Please see data sheet for the full listing of gasket temperature and pressure ratings.
Gasket Seal Confi rmation – The push-on style gasket is extremely fast to install, and the ability to visually inspect for a proper seal is never lost.
Safe Work Environment – No fumes or fl ames are present with a grooved system, omitting the safety risks involved with using hot works on a jobsite.
No Loose Components – The GRIP coupling design is installed without removing nuts or bolts. There is no risk of lost components to slow down the assembly process.For 160 years, professionals have turned to GRINNEll Mechanical
Products for innovative ideas like the GRIP Couplings, along with great
service, professional engineering and planning support. A 10-year
limited warranty – the industry’s longest and strongest – is backed by
our strength as a premier brand of Tyco International.
10 Ten-YeArwArrAnTY
Truly Rigid Design GRINNEll patented tongue and groove pad design offers a truly rigid connection as it grips the entire circumference of the pipe’s groove.
Consistent, Quality ConnectionsThe pivot-bolt feature provides an effortless, guided clamshell installation that is quick and consistent.
High Performance Gasket The EHT style gasket can handle temperatures up to 250° F (121° C). The center leg feature assists with proper placement of the gasket, so installation is quick and easy.
SPECIFICATIONS
10X FAsTer
G GRINNELL
R RAPID
I INSTALLATION
P PIVOT-BOLT
GRINNELL PRODUCT
FIGURE 640 GRIP RIGID COPPER COUPLING
FIGURE 740 GRIP RIGID COUPLING
APPLICATIONS Potable waterHVAC,Utility Piping, Process Piping
PIPE MATERIAL Hard-drawn Copper Tube
Carbon Steel, Schedule 10 (or heavier) Stainless Steel and Galvanized
GASKET GRADE “EHT” EPDM , NSF 61 approved
“EHT” EPDM and “T” Nitrile
MAXIMUM TEMPERATURE RATING
250° F / 121° C 250° F / 121° C
MAXIMUMPRESSURE RATING
300 psi / 20,7 bar 750 psi / 51,7 bar
GRIP COUPLINGS
www.grinnell.comCopyright © 2012 Grinnell Products. All rights reserved.
GM-GRIPBRO-201210_EN
From residential, education and health care projects to large municipal, infrastructure and public works installations, GRINNEll Products span the full spectrum of industries. Architects, engineers, contractors and distributors worldwide have learned to trust Tyco for a long-term commitment to product innovation and technical support.
Grinnell solutions at work.
A More efficient Coupling Technology
Swing coupling housing over the pipe. There are no nuts or bolts to remove or untighten. The pivot-bolt quickly and easily guides the coupling body into the pipe.
TighTen one nut with an impact or hand wrench. There is no need to alternate tightening – the pivot-bolt comes calibrated and does not need adjusting.
For complete installation instructions, refer to the installation manual.
Here’s How iT works:
Lube gasket. Apply a thin layer of lubricant on the inner and outer sealing surfaces of the gasket.
PuSh gasket onto the pipe until the center leg of the gasket is in contact with the end of the pipe. Push the second pipe end into the gasket, ensuring it has made contact with the center leg. Easy visual inspection ensures that the gasket is properly positioned.
installation is Ten Times Faster
G GRINNELL
R RAPID
I INSTALLATION
P PIVOT-BOLT
Global locationsUnited states of america1400 Pennbrook ParkwayLansdale, PA 19446Tel: +800 558 5236Fax: +800 877 1295
United states of america1802 S.W. 2nd StreetPompano Beach, FL 33069Tel: +954 781 0866Fax: +954 781 9330
MexicoAv. Presidente Juarez 2007 Lote 6San Jeronimo Tepetlacalco,Tlalnepantla, Estado de MéxicoMexico 54090Tel: +525 55 321 2350Fax: +525 55 321 2358
singapore2 Serangoon North Avenue 5#07-01 Singapore 554911Tel: +65 6577 4360Fax: +65 6481 8791E-mail: [email protected]
australia Level 3, 95 Coventry StreetSouthbank, VIC 3006AustraliaTel: +1300 725 688 (within Australia)Fax: +1300 720 733 (within Australia)Tel: +61 3 9313 9700Fax: +61 3 9313 9709 E-mail: [email protected]
the netherlandsKopersteden 1P.O. Box 1987500 AD EnschedeTel: +31 0 53 428 4444Fax: +31 0 53 428 3377
United arab EmiratesPO Box 61355 Warehouse TB01, R/A 8Jebel Ali Free Zone, DubaiTel: +971 4 883 8689 Fax: +971 4 883 8674
india804, Windsor, Off C.S.T. Road Nr. Bandra Kurla Complex, KalinaSantacruzMumbai 400098, IndiaTel: +91 22 6131 0600 Fax: +91 22 6741 7405E-mail: [email protected]
china2F, Building No.1, Lane 955Jinhai Road, PudongShanghai 201206Tel: +86 21 6163 3373Fax: +86 21 6163 3371E-mail: [email protected]
Hong KongUnits 905-923, 9/F, Trade Square, 681, Cheung Sha Wan Road, Cheung Sha Wan, Kowloon, Hong KongTel: +852 2753 3524Fax: +852 2505 5826E-mail: [email protected]
shanghai2F, Building No.1, Lane 955Jinhai Road, PudongShanghai 201206Tel: +86 21 6163 3373Fax: +86 21 6163 3371E-mail: [email protected]
