1. General description
The 74LV02 is a low-voltage Si-gate CMOS device that is pin and function compatible with74HC02 and 74HCT02.
The 74LV02 provides a quad 2-input NOR function.
2. Features
Wide operating voltage: 1.0 V to 5.5 V
Optimized for low voltage applications: 1.0 V to 3.6 V
Accepts TTL input levels between VCC = 2.7 V and VCC = 3.6 V
Typical output ground bounce < 0.8 V at VCC = 3.3 V and Tamb = 25 °C Typical HIGH-level output voltage (VOH) undershoot: > 2 V at VCC = 3.3 V and
Tamb = 25 °C ESD protection:
HBM JESD22-A114E exceeds 2000 V
MM JESD22-A115-A exceeds 200 V
Multiple package options
Specified from −40 °C to +85 °C and from −40 °C to +125 °C
3. Ordering information
74LV02Quad 2-input NOR gateRev. 04 — 20 December 2007 Product data sheet
Table 1. Ordering information
Type number Package
Temperature range Name Description Version
74LV02D −40 °C to +125 °C SO14 plastic small outline package; 14 leads;body width 3.9 mm
SOT108-1
74LV02PW −40 °C to +125 °C TSSOP14 plastic thin shrink small outline package; 14 leads;body width 4.4 mm
SOT402-1
74LV02BQ −40 °C to +125 °C DHVQFN14 plastic dual in-line compatible thermal enhanced verythin quad flat package; no leads; 14 terminals;body 2.5 × 3 × 0.85 mm
SOT762-1
Nexperia 74LV02Quad 2-input NOR gate
4. Functional diagram
5. Pinning information
5.1 Pinning
5.2 Pin description
Fig 1. Logic symbol Fig 2. IEC logic symbol Fig 3. Logic diagram for one gate
mna216
1A
1B1Y
3
21
2A
2B2Y
6
54
3A
3B3Y
9
810
4A
4B4Y
12
1113
001aah084
213
54≥1
6
≥1
810≥1
9
1113≥1
12
mna215
A
B
Y
(1) The die substrate is attached to this pad usingconductive die attach material. It can not be used asa supply pin or input.
Fig 4. Pin configuration SO14 and TSSOP14 Fig 5. Pin configuration DHVQFN14
02
1Y VCC
1A 4Y
1B 4B
2Y 4A
2A 3Y
2B 3B
GND 3A
001aac919
1
2
3
4
5
6
7 8
10
9
12
11
14
13
001aah093
74LV02
Transparent top view
VCC(1)
2B 3B
2A 3Y
2Y 4A
1B 4B
1A 4Y
GN
D 3A
1Y VC
C
6 9
5 10
4 11
3 12
2 13
7 8
1 14
terminal 1index area
Table 2. Pin description
Symbol Pin Description
1Y 1 data output
1A 2 data input
1B 3 data input
74LV02_4
Product data sheet Rev. 04 — 20 December 2007 2 of 12
© Nexperia B.V. 2017. All rights reserved
Nexperia 74LV02Quad 2-input NOR gate
6. Functional description
7. Limiting values
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] Ptot derates linearly with 8 mW/K above 70 °C.
[3] Ptot derates linearly with 5.5 mW/K above 60 °C.
[4] Ptot derates linearly with 4.5 mW/K above 60 °C.
2Y 4 data output
2A 5 data input
2B 6 data input
GND 7 ground (0 V)
3A 8 data input
3B 9 data input
3Y 10 data output
4A 11 data input
4B 12 data input
4Y 13 data output
VCC 14 supply voltage
Table 2. Pin description …continued
Symbol Pin Description
Table 3. Function tableH = HIGH voltage level; L = LOW voltage level; X = don’t care
Input nA Input nB Output nY
L L H
X H L
H X L
Table 4. Limiting valuesIn accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Max Unit
VCC supply voltage −0.5 +7.0 V
IIK input clamping current VI < −0.5 V or VI > VCC + 0.5 V [1] - ±20 mA
IOK output clamping current VO < −0.5 V or VO > VCC + 0.5 V [1] - ±50 mA
IO output current VO = −0.5 V to (VCC + 0.5 V) - ±25 mA
ICC supply current - 50 mA
IGND ground current −50 - mA
Tstg storage temperature −65 +150 °C
Ptot total power dissipation Tamb = −40 °C to +125 °C
SO14 package [2] - 500 mW
TSSOP14 package [3] - 500 mW
DHVQFN14 package [4] - 500 mW
74LV02_4
Product data sheet Rev. 04 — 20 December 2007 3 of 12
© Nexperia B.V. 2017. All rights reserved
Nexperia 74LV02Quad 2-input NOR gate
8. Recommended operating conditions
[1] The static characteristics are guaranteed from VCC = 1.2 V to VCC = 5.5 V, but LV devices are guaranteed to function down toVCC = 1.0 V (with input levels GND or VCC).
9. Static characteristics
Table 5. Recommended operating conditionsVoltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Typ Max Unit
VCC supply voltage [1] 1.0 3.3 5.5 V
VI input voltage 0 - VCC V
VO output voltage 0 - VCC V
Tamb ambient temperature −40 +25 +125 °C
∆t/∆V input transition rise and fall rate VCC = 1.0 V to 2.0 V - - 500 ns/V
VCC = 2.0 V to 2.7 V - - 200 ns/V
VCC = 2.7 V to 3.6 V - - 100 ns/V
VCC = 3.6 V to 5.5 V - - 50 ns/V
Table 6. Static characteristicsVoltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions −40 °C to +85 °C −40 °C to +125 °C Unit
Min Typ[1] Max Min Max
VIH HIGH-level input voltage VCC = 1.2 V 0.9 - - 0.9 - V
VCC = 2.0 V 1.4 - - 1.4 - V
VCC = 2.7 V to 3.6 V 2.0 - - 2.0 - V
VCC = 4.5 V to 5.5 V 0.7VC
C
- - 0.7VCC - V
VIL LOW-level input voltage VCC = 1.2 V - - 0.3 - 0.3 V
VCC = 2.0 V - - 0.6 - 0.6 V
VCC = 2.7 V to 3.6 V - - 0.8 - 0.8 V
VCC = 4.5 V to 5.5 V - - 0.3VCC - 0.3VCC V
VOH HIGH-level output voltage VI = VIH or VIL
IO = −100 µA; VCC = 1.2 V - 1.2 - - - V
IO = −100 µA; VCC = 2.0 V 1.8 2.0 - 1.8 - V
IO = −100 µA; VCC = 2.7 V 2.5 2.7 - 2.5 - V
IO = −100 µA; VCC = 3.0 V 2.8 3.0 - 2.8 - V
IO = −100 µA; VCC = 4.5 V 4.3 4.5 - 4.3 - V
IO = −6 mA; VCC = 3.0 V 2.4 2.82 - 2.2 - V
IO = −12 mA; VCC = 4.5 V 3.6 4.2 - 3.5 - V
74LV02_4
Product data sheet Rev. 04 — 20 December 2007 4 of 12
© Nexperia B.V. 2017. All rights reserved
Nexperia 74LV02Quad 2-input NOR gate
[1] Typical values are measured at Tamb = 25 °C.
10. Dynamic characteristics
[1] All typical values are measured at Tamb = 25 °C.
[2] tpd is the same as tPLH and tPHL.
[3] Typical values are measured at nominal supply voltage (VCC = 3.3 V and VCC = 5.0 V).
[4] CPD is used to determine the dynamic power dissipation (PD in µW).
PD = CPD × VCC2 × fi × N + Σ(CL × VCC
2 × fo) where:
fi = input frequency in MHz, fo = output frequency in MHz
CL = output load capacitance in pF
VCC = supply voltage in V
N = number of inputs switching
Σ(CL × VCC2 × fo) = sum of the outputs.
VOL LOW-level output voltage VI = VIH or VIL
IO = 100 µA; VCC = 1.2 V - 0 - - - V
IO = 100 µA; VCC = 2.0 V - 0 0.2 - 0.2 V
IO = 100 µA; VCC = 2.7 V - 0 0.2 - 0.2 V
IO = 100 µA; VCC = 3.0 V - 0 0.2 - 0.2 V
IO = 100 µA; VCC = 4.5 V - 0 0.2 - 0.2 V
IO = 6 mA; VCC = 3.0 V - 0.25 0.40 - 0.50 V
IO = 12 mA; VCC = 4.5 V - 0.35 0.55 - 0.65 V
II input leakage current VI = VCC or GND; VCC = 5.5 V - - 1.0 - 1.0 µA
ICC supply current VI = VCC or GND; IO = 0 A;VCC = 5.5 V
- - 20.0 - 40 µA
∆ICC additional supply current per input; VI = VCC − 0.6 V;VCC = 2.7 V to 3.6 V
- - 500 - 850 µA
CI input capacitance - 3.5 - - - pF
Table 6. Static characteristics …continuedVoltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions −40 °C to +85 °C −40 °C to +125 °C Unit
Min Typ[1] Max Min Max
Table 7. Dynamic characteristicsGND = 0 V; For test circuit see Figure 7.
Symbol Parameter Conditions −40 °C to +85 °C −40 °C to +125 °C Unit
Min Typ[1] Max Min Max
tpd propagation delay nA, nB to nY; see Figure 6 [2]
VCC = 1.2 V - 40 - - - ns
VCC = 2.0 V - 14 21 - 26 ns
VCC = 2.7 V - 10 15 - 19 ns
VCC = 3.0 V to 3.6 V; CL = 15 pF [3] - 6.0 - - - ns
VCC = 3.0 V to 3.6 V [3] - 7.5 12 - 15 ns
VCC = 4.5 V to 5.5 V [3] - 6.0 10 - 13 ns
CPD power dissipationcapacitance
CL = 50 pF; fi = 1 MHz;VI = GND to VCC
[4] - 22 - - - pF
74LV02_4
Product data sheet Rev. 04 — 20 December 2007 5 of 12
© Nexperia B.V. 2017. All rights reserved
Nexperia 74LV02Quad 2-input NOR gate
11. Waveforms
Measurement points are given in Table 8.
VOL and VOH are typical voltage output levels that occur with the output load.
Fig 6. The input (nA, nB) to output (nY) propagation delays
001aah085
tPHLtPLH
VM
VM
nY output
nA, nB input
VI
GND
VOH
VOL
Table 8. Measurement points
Supply voltage Input Output
VCC VM VM
< 2.7 V 0.5VCC 0.5VCC
2.7 V to 3.6 V 1.5 V 1.5 V
≥ 4.5 V 0.5VCC 0.5VCC
Test data is given in Table 9.
Definitions test circuit:
RT = Termination resistance should be equal to output impedance Zo of the pulse generator.
RL = Load resistance.
CL = Load capacitance including jig and probe capacitance.
Fig 7. Load circuit for switching times
VCC
VI VO
001aaa663
D.U.T.
CL50 pFRT
RL1 kΩ
PULSEGENERATOR
Table 9. Test data
Supply voltage Input
VCC VI tr, tf
< 2.7 V VCC ≤ 2.5 ns
2.7 V to 3.6 V 2.7 V ≤ 2.5 ns
≥ 4.5 V VCC ≤ 2.5 ns
74LV02_4
Product data sheet Rev. 04 — 20 December 2007 6 of 12
© Nexperia B.V. 2017. All rights reserved
Nexperia 74LV02Quad 2-input NOR gate
12. Package outline
Fig 8. Package outline SOT108-1 (SO14)
UNITA
max. A1 A2 A3 bp c D(1) E(1) (1)e HE L L p Q Zywv θ
REFERENCESOUTLINEVERSION
EUROPEANPROJECTION ISSUE DATE
IEC JEDEC JEITA
mm
inches
1.750.250.10
1.451.25
0.250.490.36
0.250.19
8.758.55
4.03.8
1.276.25.8
0.70.6
0.70.3 8
0
o
o
0.25 0.1
DIMENSIONS (inch dimensions are derived from the original mm dimensions)
Note
1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included.
1.00.4
SOT108-1
X
w M
θ
AA1
A2
bp
D
HE
Lp
Q
detail X
E
Z
e
c
L
v M A
(A )3
A
7
8
1
14
y
076E06 MS-012
pin 1 index
0.0690.0100.004
0.0570.049
0.010.0190.014
0.01000.0075
0.350.34
0.160.15
0.05
1.05
0.0410.2440.228
0.0280.024
0.0280.012
0.01
0.25
0.01 0.0040.0390.016
99-12-2703-02-19
0 2.5 5 mm
scale
SO14: plastic small outline package; 14 leads; body width 3.9 mm SOT108-1
74LV02_4
Product data sheet Rev. 04 — 20 December 2007 7 of 12
© Nexperia B.V. 2017. All rights reserved
Nexperia 74LV02Quad 2-input NOR gate
Fig 9. Package outline SOT402-1 (TSSOP14)
UNIT A1 A2 A3 bp c D (1) E (2) (1)e HE L L p Q Zywv θ
REFERENCESOUTLINEVERSION
EUROPEANPROJECTION ISSUE DATE
IEC JEDEC JEITA
mm 0.150.05
0.950.80
0.300.19
0.20.1
5.14.9
4.54.3
0.656.66.2
0.40.3
0.720.38
80
o
o0.13 0.10.21
DIMENSIONS (mm are the original dimensions)
Notes
1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.
2. Plastic interlead protrusions of 0.25 mm maximum per side are not included.
0.750.50
SOT402-1 MO-15399-12-2703-02-18
w Mbp
D
Z
e
0.25
1 7
14 8
θ
AA1
A2
Lp
Q
detail X
L
(A )3
HE
E
c
v M A
XA
y
0 2.5 5 mm
scale
TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm SOT402-1
Amax.
1.1
pin 1 index
74LV02_4
Product data sheet Rev. 04 — 20 December 2007 8 of 12
© Nexperia B.V. 2017. All rights reserved
Nexperia 74LV02Quad 2-input NOR gate
Fig 10. Package outline SOT762-1 (DHVQFN14)
terminal 1index area
0.51
A1 EhbUNIT ye
0.2
c
REFERENCESOUTLINEVERSION
EUROPEANPROJECTION ISSUE DATE
IEC JEDEC JEITA
mm 3.12.9
Dh
1.651.35
y1
2.62.4
1.150.85
e1
20.300.18
0.050.00
0.05 0.1
DIMENSIONS (mm are the original dimensions)
SOT762-1 MO-241 - - -- - -
0.50.3
L
0.1
v
0.05
w
0 2.5 5 mm
scale
SOT762-1DHVQFN14: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads;14 terminals; body 2.5 x 3 x 0.85 mm
A(1)
max.
AA1
c
detail X
yy1 Ce
L
Eh
Dh
e
e1
b
2 6
13 9
8
71
14
X
D
E
C
B A
02-10-1703-01-27
terminal 1index area
ACC
Bv M
w M
E(1)
Note
1. Plastic or metal protrusions of 0.075 mm maximum per side are not included.
D(1)
74LV02_4
Product data sheet Rev. 04 — 20 December 2007 9 of 12
© Nexperia B.V. 2017. All rights reserved
Nexperia 74LV02Quad 2-input NOR gate
13. Abbreviations
14. Revision history
Table 10. Abbreviations
Acronym Description
CMOS Complementary Metal Oxide Semiconductor
DUT Device Under Test
ESD ElectroStatic Discharge
HBM Human Body Model
MM Machine Model
TTL Transistor-Transistor Logic
Table 11. Revision history
Document ID Release date Data sheet status Change notice Supersedes
74LV02_4 20071220 Product data sheet - 74LV02_3
Modifications: • The format of this data sheet has been redesigned to comply with the new identity guidelines of NXP Semiconductors.
• Legal texts have been adapted to the new company name where appropriate.
• Section 3: DHVQFN14 package added.
• Section 7: derating values added for DHVQFN14 package.
• Section 12: outline drawing added for DHVQFN14 package.
74LV02_3 20030303 Product specification - 74LV02_2
74LV02_2 19980420 Product specification - 74LV02_1
74LV02_1 19970203 Product specification - -
74LV02_4
Product data sheet Rev. 04 — 20 December 2007 10 of 12
© Nexperia B.V. 2017. All rights reserved
Nexperia 74LV02Quad 2-input NOR gate
15. Legal information
15.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product statusinformation is available on the Internet at URL http://www.nexperia.com.
15.2 Definitions
Draft — The document is a draft version only. The content is still underinternal review and subject to formal approval, which may result inmodifications or additions. Nexperia does not give anyrepresentations or warranties as to the accuracy or completeness ofinformation included herein and shall have no liability for the consequences ofuse of such information.
Short data sheet — A short data sheet is an extract from a full data sheetwith the same product type number(s) and title. A short data sheet is intendedfor quick reference only and should not be relied upon to contain detailed andfull information. For detailed and full information see the relevant full datasheet, which is available on request via the local Nexperia salesoffice. In case of any inconsistency or conflict with the short data sheet, thefull data sheet shall prevail.
15.3 Disclaimers
General — Information in this document is believed to be accurate andreliable.However,Nexperiadoesnotgiveany representationsorwarranties, expressed or implied, as to the accuracy or completeness of suchinformation and shall have no liability for the consequences of use of suchinformation.
Right to make changes — Nexperia reserves the right tomakechanges to information published in this document, including withoutlimitation specifications and product descriptions, at any time and withoutnotice. This document supersedes and replaces all information supplied priorto the publication hereof.
Suitability for use — Nexperia products are not designed,authorized or warranted to be suitable for use in medical, military, aircraft,space or life support equipment, nor in applications where failure or
malfunction of a Nexperia product can reasonably be expectedto result in personal injury, death or severe property or environmentaldamage. Nexperia accepts no liability for inclusion and/or use ofNexperia products in such equipment or applications andtherefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of theseproducts are for illustrative purposes only. Nexperia makes norepresentation or warranty that such applications will be suitable for thespecified use without further testing or modification.
Limiting values — Stress above one or more limiting values (as defined inthe Absolute Maximum Ratings System of IEC 60134) may cause permanentdamage to the device. Limiting values are stress ratings only and operation ofthe device at these or any other conditions above those given in theCharacteristics sections of this document is not implied. Exposure to limitingvalues for extended periods may affect device reliability.
Terms and conditions of sale — Nexperia products are soldsubject to the general terms and conditions of commercial sale, as publishedat http://www.nexperia.com/profile/terms, including those pertaining to warranty,intellectual property rights infringement and limitation of liability, unlessexplicitly otherwise agreed to in writing by Nexperia. In case ofany inconsistency or conflict between information in this document and suchterms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpretedor construed as an offer to sell products that is open for acceptance or thegrant, conveyance or implication of any license under any copyrights, patentsor other industrial or intellectual property rights.
15.4 TrademarksNotice: All referenced brands, product names, service names and trademarksare the property of their respective owners.
16. Contact information
For additional information, please visit: http://www .nexperia.com
For sales office addresses, send an email to: [email protected]
Document status [1] [2] Product status [3] Definition
Objective [short] data sheet Development This document contains data from the objective specification for product development.
Preliminary [short] data sheet Qualification This document contains data from the preliminary specification.
Product [short] data sheet Production This document contains the product specification.
74LV02_4
Product data sheet Rev. 04 — 20 December 2007 11 of 12
© Nexperia B.V. 2017. All rights reserved
Nexperia 74LV02Quad 2-input NOR gate
17. Contents
1 General description . . . . . . . . . . . . . . . . . . . . . . 12 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Ordering information . . . . . . . . . . . . . . . . . . . . . 14 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 25 Pinning information . . . . . . . . . . . . . . . . . . . . . . 25.1 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25.2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 26 Functional description . . . . . . . . . . . . . . . . . . . 37 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 38 Recommended operating conditions. . . . . . . . 49 Static characteristics. . . . . . . . . . . . . . . . . . . . . 410 Dynamic characteristics . . . . . . . . . . . . . . . . . . 511 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 612 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 713 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 1014 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 1015 Legal information. . . . . . . . . . . . . . . . . . . . . . . 1115.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 1115.2 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1115.3 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 1115.4 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . 1116 Contact information. . . . . . . . . . . . . . . . . . . . . 1117 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
© Nexperia B.V. 2017. All rights reservedFor more information, please visit: http://www.nexperia.comFor sales office addresses, please send an email to: [email protected] Date of release: 20 December 2007