20
1 2 URBAN LIGHTING LOGIKA 78 Registered designs - Design: Massimo Sacconi
1 2
urban lighting
lOgiKa78
LOGIKA
Registered designs - Design: Massimo Sacconi
STRUCTURE
upper canopy in die-casT aluminium alloy
en 1706. lower frame in die-casT aluminium
alloy en 1706, hinged wiTh an opening sysTem
Towards The boTTom. perimeTrical seal in
epdm able To guaranTee an ip 66 proTecTion
degree. power supply cable enTry Through
waTerTighT cable clamp. opening of The lower
frame by a fasT-release hooK manufacTured
from aluminium. hooK wiTh safeTy locK
(opTional). an insulaTed meTallic gear Tray
supporTing The power supply uniT. The lamp
holder is fixed inTo The frame by meTallic
supporTs. aTTachmenT sysTem for bracKeTs
series mh-mi-md for logiKa 2. posT-Top
aTTachmenT (mT/l) and wall mounTing for
logiKa1 and logiKa 2.
proTecTion degree ip66.
insulaTion class ii.
79
LOGIKA
ST
Street optic
sTreeT lighTing
urban lighting
lOgiKa80
OP
Pedestrian crossing optic
pedesTrian crossing lighTing
Gamma Angles 180 120
105
90
75
60
45
105
90
75
60
45
30 3015 150
Q5-LO2 OPSX 250W SHP-T
90
90
180
270
360
450
Gamma Angles 180 120
105
90
75
60
45
105
90
75
60
45
30 3015 150
Q5-LO2 OPDX 250W SHP-T
90
90
180
270
360
450
Coordinate system C-Gamma, polar graph. Coordinate system C-Gamma, polar graph.
250W SHP-T LEFT 250W SHP-T RIGHTGamma Angles 180 120
105
90
75
60
45
105
90
75
60
45
30 3015 150
Q5-LO2 ST 250W SHP-T
60
60
120
180
240
300
Coordinate system C-Gamma, polar graph.
250W SHP-T
AS45 AS65
Asymmetric optic 45° Asymmetric optic 65°
archiTecTural, large areas lighTing archiTecTural, large areas lighTing
0 G
500
450
400
350
300
250
200
150
100
50
cd/klm
-180 -120 -60 0 120 180600 G
500
450
400
350
300
250
200
150
100
50
cd/klm
-180 -120 -60 0 120 18060
Coordinate system C-Gamma, Cartesian graph. Coordinate system C-Gamma, Cartesian graph.
OC
Cycle path optic
bicycle and pedesTrian paThs lighTing
GammaAngles 180 120
105 90 75 60 45
105 90 75 60 45
30 30 15 15 0
Q3-LO1 OC 70W SHP-T.BMP
150
150
300
450
600
750
Coordinate system C-Gamma, polar graph.
70W SHP-T 70W SHP-T 70W SHP-T
81
OPTICAL UNIT
lamp holder in porcelain wiTh device for The
adJusTmenT of The lamp’s focus (only for sT
opTics) in relaTion To iTs waTTage and Type. The
lamp is fixed To The lamp holder wiTh various
Kinds of cap/base: edison and dual-plugs.
possibiliTy To insTall four differenT opTics for
specific applicaTions:
ST asymmeTric sTreeT opTic in moulded by
drawing aluminium 99.85% anodized and
polished wiTh focus adJusTable in Three
differenT posiTions To opTimise The lighT
emission onTo The sTreeT surface.
OC asymmeTric opTic for bicycle and
pedesTrian paThs in exTra pure pre-anodized
aluminium.
OP asymmeTric opTic for pedesTrian crossings
in exTra pure pre-anodized aluminium.
AS asymmeTric opTic for archiTecTural and
large areas lighTing in exTra pure pre-
anodized aluminium. available wiTh Two opTic
inclinaTions of 45° and 65°.
closing screen in flaT Tempered glass in
order To guaranTee compliance wiTh even
The sTricTesT regulaTions regarding lighT
polluTion. ThicKness 4mm.
AVAILABLE WATTAGES
LOGIKA 1: from 50w To 100w shp.
from 35w To 100w whiTe son.
from 35w To 100w mhl.
from 26w To 57w fs. 60w cosmopolis.
LOGIKA 2: from 70w To 250w shp.
from 50w To 100w whiTe son.
from 70w To 250w mhl.
from 60w To 140w cosmopolis.
82 urban lighting
lOgiKa
STREET H I L S Tab. R Lm U0 Ul Ti% Em Mf Tilt
LOGIKA1 70W SHP-T P0 unilateral right 6 22 6,00 0,00 c2 1,06 0,42 0,64 10,3% 18 0,80 0LOGIKA1 70W SHP-T P1 unilateral right 7 28 8,00 0,00 c2 0,60 0,43 0,60 9,60% 11 0,80 0LOGIKA2 150 W SHP-T P0 unilateral right 8 30 8,00 0,00 c2 1,21 0,44 0,71 8,39% 21 0,80 0LOGIKA2 100 W CDO-TT P0 unilateral right 6 25 7,00 1,00 c2 1,07 0,45 0,57 7,76% 19 0,80 0
LOGIKA1 100W SHP-T P0 staggered 7 28 14,00 0,00 c2 1,19 0,61 0,75 7,16% 18 0,80 0LOGIKA2 150 W SHP-T P1 staggered 8 30 16,00 0,00 c2 1,61 0,60 0,73 8,08% 24 0,80 0
BICYCLE PATHS H I L S Em E min E max Mf Tilt
LOGIKA1 70W SHP-T P0 unilateral right 5 25 3 0 16 5 30 0,80 0LOGIKA1 70W SHP-T P0 unilateral right 4 20 4 0 20 7 47 0,80 0
INSTALLATION EXAMPLES
H: (mt.) posT heighT.
I: (mt.) spacing.
L: (mt.) sTreeT widTh.
S: (mt.) proJecTion of The device.
Lm: (cd/m2) average luminance.
U0: general uniformiTy.
Ul: longiTudinal uniformiTy.
Ti: glare facTor.
Em: (lux) average illuminaTion.
Mf: mainTenance coefficienT.
Tilt: device’s angle of inclinaTion.
LOGIKA2 150 W SHP-T P1 staggered 8 30 16,00 0,00
83
WIRING
The wiring componenTs are insTalled aT The
side of The reflecTor in The sT opTic version
and in The bacK of The reflecTor in all The
oTher versions. all The componenTs are
mounTed on a meTallic gear Tray including:
power supply uniT, capaciTor, igniTor, lamp
and ac mains connecTor.
on-load swiTch To auTomaTically disconnecT
The elecTrical wiring upon opening The frame.
insulaTion class ii.
REFERENCE STANDARDS
CEen 60598-1
en 60598-2-1
en 60598-2-3
84 urban lighting
lOgiKa
LOGIKA 1: dimensions: 474x365x133mm for posT-Top
insTallaTion (mT/l series).
LOGIKA 2: dimensions: 578x448x153mm for posT-Top
insTallaTion (mT/l series) and on bracKeTs (mh, mi and
md series).
AVAILABLE VERSIONS
LOGIKA 1 LOGIKA 2
85
Ø 102
161
474
617
64
365
70
Ø 10274
94
448
742
578
168
LAMP and CAP/BASE
LOGIKA1AS - ST - OC
(no sT optic)
50 W SHP e2770 W SHP e27 rx7s100 W SHP e40 (no as)
35 W White SON pg12-150 W White SON gx12-pg12-1100 W White SON gx12-pg12-1
35 W MHL g1250 W MHL e2770 W MHL e27 e27 g12-pg12-2 rx7s100 W MHL e27 e40 (no as)
60 W Cosmopolis pgz12
26 W FS gx24q-332 W FS gx24q-342 W FS gx24q-4
57 W FS gx24q-5(only sT)
LAMP and CAP/BASE
LOGIKA2AS - ST - OC - OP
(no op optic) (no op optic) (no op optic) (no sT optic)
70 W SHP e27 (only oc) rx7s (only oc)100 W SHP e40150 W SHP e40 rx7s-24250 W SHP e40 (no oc) fc2 (no oc)
50 WWhite SON
gx12-pg12-1(only oc)
100 W White SON pg12-1
70 W MHL e27 (only oc)
e27(only oc)
g12-pg12-2(only oc)
rx7s(only oc)
100 W MHL e27 e40150 W MHL e27 e40 g12-pgx12-2 rx7s-rx7s-24
250 W MHL e40(no oc)
g12-g22(no oc)
fc2(no oc)
60 W Cosmopolis
pgz12(only oc)
140 W Cosmopolis pgz12
86 urban lighting
lOgiKa
87
652
40
11020
5
70
617
64
Ø 1
4 64
161
183
Ø 102
652
40
11020
5
70
617
64
Ø 1
4 64
161
183
Ø 102
MT/L POST-TOP BRACKETS
bracKeT made of aluminium alloy 6060
T5. proJecTion 161mm (logiKa1) and 168mm
(logiKa2). posT-Top aTTachmenT for posTs wiTh
spigoT Ø 89mm (logiKa1) and Ø 89/102mm
850
696
172
64
Ø 102
Pole with spigot Ø 89
MT/L1 POST-TOP BRACKET
DRAWING TYPECOLOURS
DESCRIPTION POLE HEIGHT (m)
SPIGOT DIAMETER (mm)
COMPATIBLES POLES(mm)STANDARD OPTIONAL
Drawing 1 MT/L1 89/1 1 bracket 5-6-7 89 pq5-pq6-pq7Drawing 2 MT/L1 89/2 unit with 2 brackets 5-6-7 89 pq5-pq6-pq7Drawing 3 MT/L1 89/3 unit with 3 brackets 5-6-7 89 pq5-pq6-pq7Drawing 4 MT/L1 89/4 unit with 4 brackets 5-6-7 89 pq5-pq6-pq7Drawing 5 SL1 wall mounting support - - -
Drawing 1 Drawing 2 Drawing 3 Drawing 4
SILVER (COD. 03)GRAPHITE (COD. 01) SAND (COD. 04)
MT/L1
50
15526
4
94
Ø 1
4
780
206
742
74
168Ø 114
74
50
15526
4
94
Ø 1
4
780
206
742
74
168Ø 114
74
850
690
182
74
Ø 114
Pole with spigot Ø 89/102
MT/L2 POST-TOP BRACKET
DRAWING TYPECOLOURS
DESCRIPTION POLE HEIGHT (m)
SPIGOT DIAMETER (mm)
COMPATIBLES POLES(mm)STANDARD OPTIONAL
Drawing 1MT/L2 89/1 1 bracket 5-6-7 89 pq5-pq6-pq7MT/L2 102/1 1 bracket 8-9-10 102 pq8-pq9-pq10
Drawing 2MT/L2 89/2 unit with 2 brackets 5-6-7 89 pq5-pq6-pq7MT/L2 102/2 unit with 2 brackets 8-9-10 102 pq8-pq9-pq10
Drawing 3MT/L2 89/3 unit with 3 brackets 5-6-7 89 pq5-pq6-pq7MT/L2 102/3 unit with 3 brackets 8-9-10 102 pq8-pq9-pq10
Drawing 4 SL2 wall mounting support - - -
Drawing 1 Drawing 2 Drawing 3
SILVER (COD. 03)GRAPHITE (COD. 01) SAND (COD. 04)
MT/L2
Drawing 4
(logiKa2). sTainless sTeel screws and bolTs.
versions wiTh 1-2-3 fiTTings. version wiTh 4
fiTTings available only for logiKa1. wall-
mounTing version: proJecTion 183mm (logiKa1)
and
206mm (logiKa2). aTTachmenT To The wall
wiTh a fixing supporT in galvanized and
painTed iron. sTandard colour graphiTe grey.
opTional colour silver or sand.
Drawing 5
88 urban lighting
lOgiKa
89
74
1615
1052299
325
1000
Ø60
Ø
Ø 102
Ø 102/114
60
578
1619
10001559
850
850
Ø 102
74
1000
1559
74
1615
1052299
325
1000
Ø60
Ø
Ø 102
Ø 102/114
60
578
1619
10001559
850
850
Ø 102
74
1000
1559
MI AND MI/E-SERIES BRACKETS
bracKeT made of aluminium 6060 T5. proJecTion
1000mm. posT-Top aTTachmenT for posTs wiTh
spigoT Ø 89/102mm (mi version). posT aTTachmenT
wiTh collar in die-casT aluminium for posTs Ø
102mm (mi/e version). sTainless sTeel screws and
bolTs. painTed sTeel cable Tie. sTandard colour
graphiTe grey. opTional colour silver or sand.
versions wiTh 1-2 bracKeTs.
MI-SERIES BRACKET
TYPECOLOURS
DESCRIPTION POLE HEIGHT (m)
SPIGOT DIAMETER (mm)
COMPATIBLES POLES(mm)STANDARD OPTIONAL
MI 89/1 1 bracket 5-6-7 89 pq5-pq6-pq7MI 102/1 1 bracket 8-9-10 102 pq8-pq9-pq10MI 89/2 unit with 2 brackets 5-6-7 89 pq5-pq6-pq7MI 102/2 unit with 2 brackets 8-9-10 102 pq8-pq9-pq10
SILVER (COD. 03)GRAPHITE (COD. 01) SAND (COD. 04)
MI/E-SERIES BRACKET
TYPECOLOURS
DESCRIPTION POLE HEIGHT (m)
SPIGOT DIAMETER (mm)
COMPATIBLES POLES(mm)STANDARD OPTIONAL
MI/E 102/1 1 bracket 8-9-10 102 ec-pn-paMI/E 102/2 unit with 2 brackets 8-9-10 102 ec-pn-pa
SILVER (COD. 03)GRAPHITE (COD. 01) SAND (COD. 04)
90 urban lighting
lOgiKa
91
MH-SERIES BRACKETS
bracKeT made of sTeel s235 Jr en10025.
proJecTion from The posT: 1052mm. ToTal
maximum lengTh 1465mm. posT-Top aTTachmenT
for posTs wiTh spigoT Ø 89/102mm. sTainless
sTeel screws and bolTs. sTainless sTeel cable
Tie. sTandard colour graphiTe grey. opTional
colour silver or sand. versions wiTh 1-2
bracKeTs.
7474
1615
1052
1453/1465
299
325
1000
1033
Ø60
Ø
Ø 102
Ø 102
Ø 102/114
60
578
1619
1595
10331595
850
255
850
TYPECOLOURS
DESCRIPTION POLE HEIGHT (m)
SPIGOT DIAMETER (mm)
COMPATIBLES POLES(mm)STANDARD OPTIONAL
MH 89/1 1 bracket 5-6-7 89 pq5-pq6-pq7MH 102/1 1 bracket 8-9-10 102 pq8-pq9-pq10MH 89/2 unit with 2 brackets 5-6-7 89 pq5-pq6-pq7MH 102/2 unit with 2 brackets 8-9-10 102 pq8-pq9-pq10
SILVER (COD. 03)GRAPHITE (COD. 01) SAND (COD. 04)
92 urban lighting
lOgiKa
93
MD-SERIES BRACKETS
bracKeT in drawn aluminium Tube Ø 60mm
ThicKness 3mm Tapered To The diameTers
60-29mm. proJecTion from The posT 1000mm.
ToTal lengTh 1600mm. cenTral spacer of The
bracKeTs supporT made of a cenTral ring in
sTeel and an aluminium profile of ellipTical
shape, ThicKness 5mm, graphiTe grey coaTed
cod.01. posT aTTachmenT Ø 72mm for conical
posTs wiTh head 60mm and cylindrical posTs
wiTh 70mm. sTainless sTeel screws and
bolTs. sTandard colour graphiTe grey cod. 01.
versions wiTh 1-2 bracKeTs. Terminal piece in
plasTic maTerial colour blue.
7474
1615
1052299
325
1000
1033
Ø60
Ø
Ø 102
Ø 102
Ø 102/114
60
578
1619
1595
10331595
850
850
TYPECOLOUR
DESCRIPTION POLE HEIGHT (m)
SPIGOT DIAMETER (mm)
COMPATIBLES POLES (mm)STANDARD
MD 1.1-60 1 bracket 5-6-7 60 conic - 70 cylindric
conical wiTh head Ø 60
MD 2.1-60 unit with 2 brackets 8-9-10 60 conic - 70 cylindric
conical wiTh head Ø 60
GRAPHITE (COD. 01)
160x80 160x80 Ø127 Ø127 Ø127 Ø127 Ø127 Ø127 Ø127 Ø139 Ø139 Ø139 Ø139 Ø139 Ø139 Ø102 Ø102
Ø102 Ø89 Ø89
Ø89 Ø89
Ø102
Ø102 Ø102
Ø89 Ø89 Ø114 Ø114
Ø102 Ø102 Ø114 Ø114
Ø102 Ø102
Ø102 Ø102
Ø114 Ø114
PF-... PF-...
ÿ112ÿ 142
Ø60
Ø112 Ø122 Ø132 Ø142 Ø152 Ø162
Ø60
Ø60
Ø60
Ø60
Ø60
10,6 mt
10,0 mt
9,6 mt
9,0 mt
8,6 mt
8,0 mt
7,6 mt
7,0 mt
6,6 mt
6,0 mt
5,6 mt
5,0 mt
4,0 mt
TYPE BRACKET PF 5 PF 6 PF 7 PF 8 PF 9 PF 10 PR 4 PR 5 PL 6 PL 7 PL 8 PQ5/B PQ 5 PQ6/B PQ 6 PQ7/B PQ 7 PQ8/B PQ 8 PQ9/B PQ 9 PQ10/B PQ 10
LOGIKA 1 MT/L1 • • • • • •
LOGIKA 2
MT/L2 • • • • • • • • • • • •
MH • • • • • • • • • • • •
MI • • • • • • • • • • • •
HATCH
T-39 • • • •
T-39 G • • • • • • • • • • • • • • • • •
T-39 Q • •
The haTches, compleTe wiTh Terminal sTrips, are available wiTh one or Two fuses
94 urban lighting
lOgiKa
SUPPORTS
logiKa is an inTegral parT of a sysTem ThaT in-
cludes various Types of supporTs in The series
pf, pr, pl, pq produced in heighTs ranging
from 4,00 To 10,00mt for in-ground insTallaTion
(mounTing plaTe available on requesT).CEen40
160x80 160x80 Ø127 Ø127 Ø127 Ø127 Ø127 Ø127 Ø127 Ø139 Ø139 Ø139 Ø139 Ø139 Ø139 Ø102 Ø102
Ø102 Ø89 Ø89
Ø89 Ø89
Ø102
Ø102 Ø102
Ø89 Ø89 Ø114 Ø114
Ø102 Ø102 Ø114 Ø114
Ø102 Ø102
Ø102 Ø102
Ø114 Ø114
PF-... PF-...
ÿ112ÿ 142
Ø60
Ø112 Ø122 Ø132 Ø142 Ø152 Ø162
Ø60
Ø60
Ø60
Ø60
Ø60
10,6 mt
10,0 mt
9,6 mt
9,0 mt
8,6 mt
8,0 mt
7,6 mt
7,0 mt
6,6 mt
6,0 mt
5,6 mt
5,0 mt
4,0 mt
TYPE BRACKET PF 5 PF 6 PF 7 PF 8 PF 9 PF 10 PR 4 PR 5 PL 6 PL 7 PL 8 PQ5/B PQ 5 PQ6/B PQ 6 PQ7/B PQ 7 PQ8/B PQ 8 PQ9/B PQ 9 PQ10/B PQ 10
LOGIKA 1 MT/L1 • • • • • •
LOGIKA 2
MT/L2 • • • • • • • • • • • •
MH • • • • • • • • • • • •
MI • • • • • • • • • • • •
HATCH
T-39 • • • •
T-39 G • • • • • • • • • • • • • • • • •
T-39 Q • •
RECTANGULAR POLES PR SERIES
The recTangular poles, dimensions 80x160, are
equipped wiTh The posT-Top aTTachmenT for
logiKa 1 and logiKa 2. The poles are available
for single or double luminaire applicaTions
and are equipped wiTh a horizonTal sloT for
The Terminal sTrip mod. T39q.
haTches series T 39 sTandard 1-2 fuses
haTches series “reseT” posT cable opTional
graphiTe cod. 01
95
CYLINDRICAL POLES PL SERIES
The cylindrical poles, Ø 127, are equipped wiTh
The posT-Top aTTachmenT for logiKa 1 and logiKa
2. These poles are available for single, double or
Triple luminaire applicaTions and are equipped
wiTh a sloT for The Terminal sTrip mod. T39g.
TAPERED CYLINDRICAL POLES PQ/PQB SERIES
The Tapered cylindrical poles pq series are
equipped wiTh a spigoT for posT-Top mounTing
and bracKeTs: mT/l - mh - mi. The poles are
available wiTh or wiThouT The base and are
equipped wiTh sloT for The Terminal sTrip mod.
T39.
CURVED CONICAL CYLINDRICAL POLES PF SERIES
The curved conical poles are equipped wiTh an
aTTachmenT for logiKa 1 (pf5 - pf6) and logiKa 2
(pf7 - pf8 - pf9 - pf10). They are also equipped wiTh
sloT for The Terminal sTrip mod. T39 and T39g.
Ht
Ø Db
Ø Da
Ø Dc
BASE DIMENSION FOR PQ POLESPOLE Ht Ø Da Ø Db Ø Dc
PQ5 1077 350 140 152
PQ6 1077 350 159 168
PQ7 1277 350 159 168
PQ8 1277 400 168 193
PQ9 1577 400 168 193
PQ10 1577 400 168 193
96
COATINGS AND COLOURS
meTallic parTs proTecTed by a
phosphochromaTion process or a special
TreaTmenT wiTh nanoceramic coaTing
and subsequenTly coaTed wiTh polyesTer
powders.
opTional colours aT exTra cosT
according To quanTiTy.
COLOUR TABLE
GRAPHITE GREY WITH SATINY EFFECT Cod. 01
STANDARD
METALLIC SILVER WITH SATINY EFFECT Cod. 03
SAND WITH SATINY EFFECTCod. 04
OPTIONAL OPTIONAL
urban lighting
lOgiKa
5,0
6,0
7,0
5,6
7,2
97
7,7
8,0
