7ed0c9204d2324822dcb92f20bb1212b

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

1/33

LCD TVLA19R7

Owners Instructions

Before operating the unit,

please read this manual thoroughly,

and retain it for future reference.

ON-SCREEN MENUS

PC DISPLAY

TELETEXT

BN68-01287A-01

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products,please contact the SAMSUNG customer care centre.

Register your product at www.samsung.com/global/register

Record your Model and Serial number here for future reference. Model _______________ Serial No. _______________

Country

AUSTRALIA

CHINA

HONG KONG

INDIA

INDONESIA

JAPAN

MALAYSIA

PHILIPPINES

SINGAPORE

THAILAND

TAIWAN

VIETNAM

SOUTH AFRICA

U.A.E

Customer Care Centre

1300 362 603

800-810-5858 , 010- 6475 1880

3698 - 4698

3030 8282

1800 1100 11

0800-112-8888

0120-327-527

1800-88-9999

1800-10-SAMSUNG (7267864)

1800-SAMSUNG (7267864)

1800-29-3232

02-689-3232

0800-329-999

1 800 588 889

0860 7267864 (SAMSUNG)

800SAMSUNG (7267864)

8000-4726

Web Site

www.samsung.com/au

www.samsung.com.cn

www.samsung.com/hk

www.samsung.com/in

www.samsung.com/id

www.samsung.com/jp

www.samsung.com/my

www.samsung.com/ph

www.samsung.com/sg

www.samsung.com/th

www.samsung.com/tw

www.samsung.vn

www.samsung.com/za

www.samsung.com/mea

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

2/33

Do not display a still image on the LCD panel for more than 2 hours as it can cause screen imageretention. This image retention is also known as "screen burn".To avoid such image retention, reduce the degree of brightness and contrast of the screen whendisplaying a still image.

Watching the LCD TV in 4:3 format for a long period of time may leave traces of bordersdisplayed on the left, right and center of the screen caused by the difference of lightemission on the screen. Playing a DVD or a game console may cause a similar effect to the

screen. Damages caused by the above effect are not covered by the Warranty.

Displaying still images from Video games and PC for longer than a certain period of time may producepartial after-images. To prevent this effect, reduce the brightness and contrast when displaying stillimages.

2007 Samsung Electronics Co., Ltd. All rights reserved.

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

3/33

Egs -

Ces

ConnECting and PrEParing Your tV

List of Parts ........................................................ 2Viewing the Control Panel .................................. 3Viewing the Connection Panel ........................... 4Viewing the Remote Control............................... 6

Installing Batteries in the Remote Control .......... 7Switching On and Off ......................................... 7Placing Your Television in Standby Mode........... 7Plug & Play ......................................................... 8

SEtting thE ChannElS

Storing Channels Automatically ......................... 9Storing Channels Manually .............................. 10Editing the Channels .........................................11Sorting the Stored Channels .............................11Assigning Channels Names ............................. 12Fine Tuning Channel Reception ....................... 12

SEtting thE PiCturE

Changing the Picture Standard ........................ 13Adjusting the Custom Picture ........................... 13Changing the Colour Tone................................ 14Changing the Picture Size ................................ 14Adjusting the Colour Control ............................ 15Freezing the Current Picture ............................ 15

SEtting thE Sound

Changing the Sound Standard ......................... 16Customizing the Sound .................................... 16Selecting the Sound Mode ............................... 17Adjusting the Volume Automatically ................. 17Connecting Headphones .................................. 17

SEtting thE tiME

Setting and Displaying the Current Time .......... 18Setting the Sleep Timer .................................... 19

Switching the Television On and OffAutomatically .................................................... 20

FunCtion dESCriPtion

Choosing Your Language ................................. 21Setting the Blue Screen Mode ......................... 21Selecting the Source ........................................ 22Editing the Input Source Names ...................... 22

uSing thE tElEtExt FEaturE

Teletext Decoder .............................................. 23Displaying the Teletext Information .................. 23Selecting a Specic Teletext Page ................... 24Using Fastext to Select a Teletext Page........... 24Storing Teletext Pages ..................................... 25

SEtting thE PC

Setting up Your PC Software(Based on Windows XP) .................................. 26Display Modes .................................................. 26Setting the PC .................................................. 27

rECoMMEndationS For uSE

How to Adjust the Stand ................................... 28How to Adjust the Angle of the TV .................... 28Installing the Wall Mount Kit ............................. 28Installing VESA compliant mounting devices ... 28Using the Decoration Covers ........................... 29Troubleshooting: Before Contacting

Service Personnel ............................................ 29Technical and Environmental Specications .... 30

Egs -

Symb Press Important Note One-Touch

Button

English

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

4/33

English -

List of Parts

Please make sure the following items are included with your LCD TV.If any items are missing, contact your dealer.

Remote Control &Batteries(AAA x 2)

Power Cord Wall Mount kit Owners Instructions

Warranty Card/Registration Card/

Safety Guide Manual(Not available in all

locations)

Decoration CoverFerrite Core

(Not available in alllocations)

Cleaning Cloth

The ferrite core is used to shield the cable from interference.When connecting a cable, open the ferrite core and clip it aroundthe cable.

Power Cord

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

5/33

Egs -

Vew e C Pe

1 SourCE

Toggles between all the available input sources(TV, AV, S-Video, Component, PC, HDMI).In the on-screen menu, use this button as youuse the EntEr button on the remote control.

2 MEnuPress to see an on-screen menu of your TVsfeatures.

3 + Vol -

Press to increase or decrease the volume.In the on-screen menu, use the + Vol -

buttons as you use the and buttons onthe remote control.

4 Ch

Press to change channels.In the on-screen menu, use the Chbuttons as you use the and buttons onthe remote control.(Without the Remote Control, you can turn onthe TV by using the Channel buttons.)

5 Spekes

6 (PoWEr)Press to turn the TV on and off.Pwe icBlinks and turns off when the power is on and

lights up in stand-by mode.

7 reme C SesAim the remote control towards this spot onthe TV.

1

The product colour and shape may vary depending on the model.

2

3

4

5

6 7

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

6/33

Egs -

Vew e Cec Pe

HDMI IN

COMPONENT IN AV IN

PC IN

PCHDMIAUDIO

AUDIO AUDIO VIDEO

AUDIO

S-VIDEO

Power Input

1

Whenever you connect an external device to your TV, make sure that power on the unit is turned off.When connecting an external device, match the colour of the connection terminal to the cable.

1Cec hdMi

- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVDplayers, AV receivers and digital TVs).

- No additional Audio connection is needed for an HDMI to HDMI connection.

What is HDMI?- High Definition Multimedia interface allows the transmission of high definition digital video

data and multiple channels of digital audio (5. 1 channels).- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate

cable (not supplied). The difference between HDMI and DVI is that the HDMI device issmaller in size, has the HDCP(High Bandwidth Digital Copy Protection) coding featureinstalled, and supports multi - channel digital audio.

You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and theR - AUDIO - L terminal on DVI for sound output.

- When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or GamesConsole etc, make sure that it has been set to a compatible video output mode as shown inthe table below. Failure to observe this may result in picture distortion, image breakup or nopicture.

Supported modes for HDMI/DVI and Component

- Do not attempt to connect the HDMI/DVI connector to a PC or Laptop Graphics Card.

(This will result in a blank screen being displayed)

2 3

547 6

HDMI/DVI 50Hz

HDMI/DVI 60Hz

Component

480i

X

X

O

480p

X

O

O

576i

X

X

O

576p

O

X

O

720p

O

O

O

1080i

O

O

O

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

7/33

Egs -

2 Cec Cmpe

- Connect the D- Sub cable (optional) to PC (PC IN) on the rear of your set and the other end to theVideo Card of your computer.

- Connect the stereo audio cable (optional) to AUDIO (PC IN) on the rear of your set and the other endto Audio Out of the sound card on your computer.

3 Cec ae Cbe teevs newk

To view television channels correctly, a signal must be received by the set from one of the followingsources:

- An outdoor aerial / A cable television network / A satellite network

4 Cec Cmpe devces (dVd)

- Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear ofyour set and the other ends to corresponding component video out connectors on the DVD.

- If you wish to connect both the Set-Top Box and (or DVD), you should connect the Set-Top Box tothe (or DVD) and connect the (or DVD) to component connector ("PR", "PB", "Y") on your set.

- The PR, PB and Y connectors on your component devices (DVD) are sometimes labeled Y, B-Yand R-Y or Y, Cb and Cr.

- Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other endsto corresponding audio out connectors on the DVD.

- This LCD TV displays its optimum picture resolution in 720p mode.- This LCD TV displays its maximum picture resolution in 1080i mode.

5 Cec Ee a/V devces

- Connect RCA (optional) or S-VIDEO cable (optional) to an appropriate external A/V device such asVCR, DVD or Camcorder.

- Connect RCA audio cables (optional) to R - AUDIO - L on the rear of your set and the other ends tocorresponding audio out connectors on the A/V device.

- Headphone may be connected to the headphone output (6) on the rear of your set. While theheadphone is connected, the sound from the built-in speakers will be disabled.

7 Kes lck

- The Kensington lock (optional) is a device used to physically fix the system when used in a publicplace.

- If you want to use a locking device, contact the dealer where you purchased the TV.

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

8/33

Egs -

Vew e reme C

1 Television Standby button teee Fcs

3 Teletext hold

6 Teletext index

0 Teletext sub page

! Teletext size selection

@ Teletext display/mix bothteletext information and thenormal broadcast

# Teletext reveal

$ Teletext mode selection(LIST/FLOF)

^ P : Teletext next page

P : Teletext previous page

& Teletext cancel

) Teletext store

a Exit from the teletext display

8 9*(

Fastext topic selection

2 Number buttons for directchannel access

3 One/Two-digit channel

selection

4 : Volume increase

: Volume decrease

5 Temporary sound switch-off

6 Menu display and changeconfirmation

7 Control the cursor in themenu

8 Sound mode selection

9 Picture effect selection

0 Sound effect selection

# Use to see information onthe current broadcast

$Available source selection

% Previous channel

^ P : Next channel

P : Previous channel

& Exit the on screen menu

* Picture freeze

( Picture size selection

)Automatic Power-off

a Selects the TV modedirectly

The performance of the remote control may be affected by bright light.

This is a special remote control for the visually impaired, and has Braille points on the Power,Channel and Volume buttons.

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

9/33

Egs -

Swc o off

te ms e s ce e e f y se.

. Plug the mains lead into an appropriate socket.The standby indicator lights up on the front of the set.

. Press the button on the front of the set.You also can press the PoWEr button or the tV ( ) button on the remote control to turnthe TV on.The programme that you were watching last is reselected automatically.

. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control orCh button on the right side of the set.When you switch the set on for the very first time, you will be asked to choose language inwhich the menus are to be displayed.

. To switch your set off, press the PoWEr button again.

Y se c be pce sby me e ece e pwe csmp. te sbyme c be sef we y ws ep vew empy ( me, f empe).

. Press the PoWEr button on the remote control.The screen is turned off and a red standby indicator appears on the front of your set.

. To switch your set back on, simply press the PoWEr , numeric buttons (0~9), tV( ) button or channel up/down ( / ) button again.

Do not leave your set in standby mode for long periods of time

(when you are away on holiday, for example).It is best to unplug the set from the mains and aerial.

Pc Y teevs Sby Me

. Lift the cover at the back of the remote control upward as shown in thefigure.

. Install two AAA size batteries.

Make sure to match the + and ends of the batteries diagraminside the compartment.

. Replace the cover.

Remove the batteries and store them in a cool, dry place using theremote control for a long time. The remote control up to about 23 feetfrom the TV. (Assuming typical TV usage, the batteries last for aboutone year.)

If the remote control doesnt work, check the following:. Is the TV power on?. Are the plus and minus ends of the batteries reversed?

. Are the batteries drained?.Is there a power outage, or is the power cord unplugged?. Is there a special fluorescent light or neon sign nearby?

is Bees e reme C

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

10/33

Egs -

We e tV s y pwee , seve bsc sespcee mcy sbseqey. te fwses e vbe.

. Press the PoWEr button on the remote control.

The message "Start Plug & Play" is displayed with "OK" selected.

. Select the appropriate language by pressing the or button.Press the EntEr button to confirm your choice.

. The message Check antenna input. is displayed with OK selected.Press the EntEr button.

Please check that the antenna or cable TV is connected correctly.

. Select the appropriate country by pressing the or button.Press the EntEr button to confirm your choice.

. The "Auto Store" menu is displayed with the "Start" selected. Press the EntEr button.The channel search will start and end automatically.

After all the available channels are stored, the "Clock Set" menu appears.Press the EntEr button at any time to interrupt the memorization process.

. Press the EntEr button.Select the Hour, Minute or "am/pm" by pressing the or button.Set the Hour, Minute or "am/pm" by pressing the or button.

You can also set the hour and minute by pressing the number buttons on the remote control.

. Press the EntEr button to confirm your setting.The message Enjoy your watching. is displayed.

le: Select your language.ae:Select your country.a Se: Automatically scans for and stores channels available in the local area.Cck Se: Sets the current time for the TV clock.

P & Py

P & Py

Ee E

S P & Py.

oK

if y w ese s fee...

. Press the MEnu button to display the menu.Press the or button to select "Setup", then press theEntEr button.

. Press the EntEr button again, to select "Plug & Play".

. The message to "Start Plug & Play" is displayed.

- Storing Channels Automatically

- Storing Channels Manually

Sep

Mve Ee re

P & Py le : Es tme Be Scee : off PC

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

11/33

Egs - 9

Y c sc f e feqecy ges vilble y (dvilbiliy depeds y cy).amiclly llced pgmme mbes my cespd cl desied pgmme mbes. hweve, y c smbes mlly d cle y cels y d wis wc.

. Press the MEnu button to display the menu.Press the or button to select "Channel", then press theEntEr button.

. Press the EntEr button to select Area.

. Select the appropriate areaby pressing the or button.Press the EntEr button to confirm your choice.

. Press the or button to select Auto Store" then press theEntEr button.

. Press the EntEr button to select Start.

The TV will begin memorizing all of the available channels.Press the EntEr button at any time to interrupt thememorization process and return to the "Channel" menu.

. After all the available channels are stored, the "Sort" menuappears.

S Ces amcyCe

Mve Ee re

ae : as/W.Epe a Se M Se Ce Me S nme Fe te

ae

Mve Ee re

as/W.EpeCiS/E.EpeCh K/uKasnZl/iesS af camec

a Se

0Mhz P C-- VhF-l

Ee re

0%

S

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

12/33

Egs - 0

S Ces My

Y c se p 00 ces, c se eceve vcbe ewks.We s ces my, y c cse:Wee se ec f e ces f.te pmme mbe f ec se ce wc y

ws efy.. Press the MEnu button to display the menu.

Press the or button to select "Channel", then press theEntEr button.

. Press the or button to select "Manual Store", then pressthe EntEr button.

. Press the EntEr button to select "Programme".

. To assign a programme number to a channel, find the correctnumber by pressing the or button and then press theEntEr button.

You can also set a programme number by pressing number buttons on the remote control.

. Press the or button to select "Colour System", then press the EntEr button.

. Select the colour standard required by pressing the or button then, press the EntEr button.

. Press the or button to select "Sound System", then press the EntEr button.

. Select the sound standard required by pressing the or button, then press the EntEr button.If there is an abnormal sound or no sound, re-select the sound system required.

9. If you know the number of the channel to be stored, press the or button to select "Channel".Press the EntEr button. Select C (Air channel) orS (Cable channel) by pressing the orbutton. Press the button to select channel.Select the required number by pressing the or button and then press the EntEr button.

Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)You can also set a channel number by pressing number buttons on the remote control.

0. If you do not know the channel numbers, press the or button to select "Search".Press the EntEr button. Search by pressing the or button and then press the EntEr button.

. Press the or button to select Store, then press the EntEr button.Press the or button to select OK, then press the EntEr button.

. Repeat steps to for each channel to be stored.

Pmme: Selects a program number for the channel.

C Sysem: Sets the colour supporting system.

S Sysem: Sets the sound supporting system.

Ce: Selects a channel.

Sec: Scans for the frequency value for the channel.

Se: Saves your settings.

Ce

Mve Ee re

ae : as/W.Epea Se M Se Ce Me S nme Fe te

M Se

Mve Ee re

Pmme : PC Sysem : a S Sysem : Bg Ce : C--Sec : 9 MhzSe : ?

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

13/33

Egs -

Y c ece e ces y cse fm e cesy sce. We y sc e se ces,se y ve cse skp e spye.a ces y specfcy cse skp espye sc.

. Use the number buttons to directly select the channel that willbe added or deleted.

. Press the MEnu button to display the menu.Press the or button to select Channel, then press theEntEr button.

. Press the or button to select Channel Manager, thenpress the EntEr button.

. Press the or button to select channels to be deleted oradded.

. Press the button to select " " column, then press theEntEr button.

The channels marked with will be added.

. Press the Exit button to exit.

You can view any channel (including an erased channel) byusing the number buttons on the remote control.

E e Ces

Y c ece e mbes f w ces, e :

Mfy e mec e wc e ces vebee mcy se.

gve esy emembee mbes e ces y wc ms fe.

. Press the MEnu button to display the menu. Press the orbutton to select "Channel", then press the EntEr button.

. Press the or button to select "Sort", then press theEntEr button.

. Press the EntEr button to select From.Press the or button until the channel number that youwish to change is displayed.Press the EntEr button.

. Press the or button to select To, then press the EntEr button.Press the or button until the new number by which you wish to identify the channel isdisplayed.Press the EntEr button.

. Press the or button to select Store, then press the EntEr button.Press the or button to select OK, then press the EntEr button.

The selected channel is exchanged with the one reviously stored to the chosen number.

. Repeat steps 3 to 5 for another channel to be sorted.


S e Se Ces

Ce

Mve Ee re


Ce

Mve Ee re

ae : as/W.Epe a Se M Se Ce Me S nme Fe te

S

Mve Ee re

Fm : Pt : P--Se : ?

P

Ce Me

Pe re

Mve Ee

a

/

P.P

PPPPPPP

P9P0PPP

P

P

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

14/33

Egs -

ass Ces nmes

Ce mes w be sse mcy we cefm s bcs. tese mes c be ce,w y ss ew mes.

. Press the MEnu button to display the menu.

Press the or button to select "Channel", then press theEntEr button.

. Press the or button to select "Name", then press theEntEr button.

. If necessary, select the channel to be assigned to a newname by pressing the or button. Press the EntErbutton.

The selection bar is displayed around the name box.

.

The characters available are : Letters of the alphabet (A~Z) / Numbers (0~9) /Special characters ( -, space)

. Repeat steps to for each channel to be assigned to a new name.


Mve Ee re

t...

Select a letter, number or symbol

Move on the next letter

Move back the previous letter

Confirm the name

te...

Press the or button

Press the button

Press the button

Press the EntEr button

use fe my js pc ce fpm ecep.

. Use the number buttons to directly select the channel thatyou want to fine tune.

. Press the MEnu button to display the menu.Press the or button to select "Channel", then press theEntEr button.

. Press the or button to select "Fine Tune", then press

the EntEr button.. Press the or button to adjust the fine tuning.

Press the EntEr button.


Fine tuned channels that have been saved are marked withan asterisk "*" on the right-hand side of the channel numberin the channel banner. And the channel number turns red.

To reset the fine-tuning, select "Reset" by pressing the or button and then press the EntEr button.

Fe t Ce recep

Ce

Mve Ee re


nme

Mve Ee re

P. C. nme

C- - - - - - - C- - - - - - - C- - - - - - - C- - - - - - - C- - - - - - -

Ce

Mve Ee re


Fe te

P

ajs Sve reMve

00

rese

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

15/33

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

16/33

English - 14

Changing the Colour Tone

You can select the most comfortable colour tone to your eyes.

1. PresstheMENUbuttontodisplaythemenu.PresstheorbuttontoselectPicture,thenpresstheENTERbutton.

2. Presstheorbuttontoselect"ColourTone",thenpress theENTERbutton.

3. Presstheorbuttontoselectthedesiredcolourtone setting.PresstheENTER button.

4. PresstheEXITbuttontoexit

Cool2: Makesthecolourtemperaturebluerthan"Cool1" menu.Cool1: Makeswhitesbluish.Normal: Keepswhiteswhite.Warm1: Makeswhitesreddish.Warm2: Makesthecolourtemperatureredderthan"Warm1"menu.

InthePCmode,Cool,Normal,Warm,Customappears.

You can select the picture size which best corresponds to yourviewing requirements.

1. PresstheMENUbuttontodisplaythemenu.PresstheorbuttontoselectPicture,thenpresstheENTERbutton.

2. Presstheorbuttontoselect"Size",thenpresstheENTERbutton.

3. Selecttherequiredoptionbypressingtheorbutton. PresstheENTERbutton.

4. PresstheEXITbuttontoexit.

Wide:AdjuststhepicturesizetoWideappropriateforDVDsorwidebroadcasting.

16:9:Adjuststhepicturesizeto16:9appropriateforDVDsorwidebroadcasting.

Zoom:MagnifiestheWidepicture(intheverticaldirection)tofitthescreensize.

4:3:Thisisthedefaultsettingforavideomovieornormalbroadcasting.

InPC,ComponentandHDMIMode,only"Wide"and"4:3"modecanbeadjusted.

Zoom:Select bypressingtheorbuttons.

Usethe

or

buttontomovethepictureupanddown.Afterselecting ,usetheorbuttontomagnifyorreducethepicturesizeintheverticaldirection.

Changing the Picture Size

Youcanselecttheseoptions bysimplypressingtheP.SIZE buttonontheremotecontrol.

TV

Picture

Move Enter Return

Mode : Dynamic Custom Colour Tone : Cool1 Size : Wide

Colour Tone

Move Enter Return

Cool 2Cool 1NormalWarm 1Warm 2

Picture

Move Enter Return

Mode : Dynamic Custom Colour Tone : Cool1

Size : Wide

Size

Move Enter Return

Wide16:9Zoom4 : 3

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

17/33

English - 15

Press the STILL button to freeze a moving picture into astill one. Press again to cancel.

This function is not available in HDMI and Component mode.

Freezing the Current Picture

Adjust the individual R, G, B Colour Controls.

1. Press the MENU button to display the menu.Press the or button to select Picture, then press theENTER button.

2. Press the or button to select Colour Control, then pressthe ENTER button.

3. Press the or button to select a particular item.Press the ENTER button.

4. Press the or button to decrease or increase the value ofparticular item. Press the ENTER button.

5. Press the EXIT button to exit.

Available in PC Mode Only.

Adjusting the Colour Control

Picture

Move Enter Return

Mode : Dynamic Custom Colour Tone : Cool1 Colour Control Size : Wide

Colour Control

Move Enter Return

RedGreenBlue

01950

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

18/33

Egs -

Y c seec e ype f e spec s effec be sewe wc ve bcs.

. Press the MEnu button to display the menu.Press the or button to select "Sound", then press the

EntEr button.. Press the EntEr button again, to select "Mode".

. Select the required sound effect by pressing the orbutton repeatedly and then press the EntEr button.


S: Selects the normal sound mode.Msc: Emphasizes music over voices.Mve: Provides live and full sound for movies.Speec: Emphasizes voices over other sounds.Csm: Selects your custom sound settings.

(Refer to "Coustomizing the Sound")

C e S S

tV

tV

te s ses c be jse s y pespefeeces.(aevey, y c se e f e mc ses.)

. Press the MEnu button to display the menu.Press the or button to select "Sound", then press theEntEr button.

. Press the or button to select "Custom, then press theEntEr button.

. Press the or button to select a particular item.Press the EntEr button.

. Press the or button to decrease or increase the value ofa particular item. Press the EntEr button.


If you make any changes to these settings, the sound mode is automatically switched to theCustom mode.

Csmz e S

tV

You can select these optionsby simply pressing theS.ModE button on the remotecontrol.

S

Mve Ee re

Me : Msc Csm a Vme : off

Me

Mve Ee re

SMscMveSpeecCsm

Csm

Mve Ee re

BsstebeBce l 0

0

r

S

Mve Ee re


7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

19/33

Egs -

ajs e Vme amcy

Ec bcs s s s w s cs, s s esy f y js e vme evey me ece s ce. ts fee ws y mcyjs e vme f e ese ce by we es p we e m s s bys e s p we e m s s w.

. Press the MEnu button to display the menu.Press the or button to select "Sound", then press the EntEr button.

. Press the or button to select "Auto Volume", then press the EntEr button.

. Press the or button to select "On" or "Off".Press the EntEr button.


Seec e S Me

You can also set theseoptions simply by pressing thedual i-ii button on remotecontrol.

Y c se e s me by pess e dual i-iib.We y pess , e ce s me s spye e scee.

Audio Type

Mono

Stereo

Dual

Mono

Stereo

Dual

DUAL 1/2

MONO

STEREO MONO

DUAL 1 DUAL 2

MONO

MONO STEREO

MONO DUAL 1DUAL 2

Default

DUAL 1

DUAL 1

Automaticchange

Automaticchange

A2Stereo

NICAMStereo

If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.

This function is only activated in stereo sound signal. It is deactivated in mono sound signal.

Y c cec se f epes y se f y ws wc tV pmme w sb e e pepe em.

Prolonged use of headphones at a high volume may damage yourhearing.

You will not receive sound from the speakers when you connect headphones to the system.

Cec hepes

S

Mve Ee re


a Vme

Mve Ee re

offo

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

20/33

Egs -

Y c se e tVs cck s e ce me sspye we y pess e inFo b. Y ms sse e me f y ws se e mc o/off mes.


Press the or button to select "Setup", then press theEntEr button.

. Press the or button to select "Time", then press theEntEr button.

. Press the EntEr button to select "Clock Set".

.


If you disconnect the power cord, you have to set the clockagain.

You can also set Hour and Minute by pressing the numberbuttons on the remote control.

Se dspy e Ce tme

t...

Move to Hour, Minute or am/pm

Set the HourMinute or am/pm

Press the EntEr button.

Pess e...

or button.

or button.

Sep

Mve Ee re


tme

Mve Ee re

Cck Se -- : --

Seep tme : off o tme -- : -- m off off tme -- : -- m off

Cck Se

Mve ajs re

h Me m/pm

00 m

PMPce : dymcS : Csm

: 00 m

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

21/33

Egs - 9

Y c seec me pe f bewee 0 0 mesfe wc e eevs mcy swces sbyme.



. Press the or button to select "Time", then press theEntEr button.

. Press the or button to select "Sleep Timer", then pressthe EntEr button.

. Press the or button dly until the desired timeappears (Off, 30, 60, 90, 120, 150, 180).Press the EntEr button.


The TV automatically switches to standby mode when thetimer reaches 0.

Se e Seep tme

tV

Press the SlEEP button onthe remote control repeatedly

until the appropriate time inter-val appears.

Seep tme

Mve Ee re

off

0090000

Sep

Mve Ee re


tme

Mve Ee re

Cck Se -- : -- Seep tme : off o tme -- : -- m off off tme -- : -- m off

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

22/33

Egs - 0

Swc e teevs o off amcy

Y c se e o/off mes s e se w:

Swc mcy e e ce fy cce e me y seec.

Swc ff mcy e me y seec.. Press the MEnu button to display the menu.

Press the or buttons to select "Setup", then press theEntEr button.

. Press the or button to select Time, then press theEntEr button.

. Press the or button to select On Timer, then press theEntEr button.

. Press the or buttons to adjust Hour, then press the button to move to the next step.

Set other items using the same method as above.When finished, press the EntEr button to return.

. Press the or button to select Off Timer, then press theEntEr button.

. Press the or buttons to adjust Hour, then press the button to move to the next step.Set other items using the same method as above.When finished, press the EntEr button to return.


The first step is to set the televisions clock.

(refer to Setting and Displaying the Current Time onpage 18)

You can also set hour and minute by pressing the number buttons on the remote control.

The "Activation" setting must be set to "On" in order for the timers to work.

o tme

Mve ajs re

h Me m/pm00 m

P

Pmme Vme

0 off

acv

off tme

Mve ajs re

h Me m/pm

00 m

off

acv

Sep

Mve Ee re

P & Py le : Es tme Be Scee : off

PC

tme

Mve Ee re

Cck Se -- : -- Seep tme : off

o tme -- : -- m off off tme -- : -- m off

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

23/33

Egs -

We y s s y se f e fs me, y msseec e e wc w be se f spy mes cs.

. Press the MEnu button to display the on-screen menu.


. Press the or button to select "Language", then pressthe EntEr button.

. Select a particular language by pressing the or buttonrepeatedly.Press the EntEr button.

You can choose one of 2 languages.


Cs Y le

if s s be eceve e s s vey wek, bescee mcy epces e sy pce bck.if y ws ce vew e p pce, y ms see "Be Scee" me "off".



. Press the or button to select Blue Screen then pressthe EntEr button.

. Press the or button to select "On" or "Off". Press theEntEr button.


Se e Be Scee Me

le

Mve Ee re

Es

Be Scee

Mve Ee re

offo

Sep

Mve Ee re

P & Py le : Es tme Be Scee : off

PC

Sep

Mve Ee re

P & Py le : Es tme

Be Scee : off PC

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

24/33

Egs -

nme e evce cece e p jcks mke yp sce seec ese.

. Press the MEnu button to display the menu.Press the or button to select Input, then press the EntEr button.

. Press the or button to select "Edit Name", then pressthe EntEr button.

. Press the or button to select the device that you wishto edit. Press the EntEr button.

. Press the or button to select the required device.Press the EntEr button.

The following options are available:- - - - - VCR - DVD - Cable STB - HD STB - Satellite STB -

AV Receiver - DVD Receiver - Game - Camcorder - DVDCombo - DHR - PC

DHR: DVD HDD Recorder


E e ip Sce nmes

Y c seec m ee sces cece ytVs p jcks.

. Press the MEnu button to display the menu.Press the or button to select Input, then press the

EntEr button.. Press the EntEr button again, to select "Source List".

. Select the required device by pressing the or button.Press the EntEr button.

You can only select a source if it is connected to your TV.

Press the SourCE button on the remote control to toggelbetween all the available source.

TV mode can be selected by pressing the tV( ) button,number buttons(0~9), and the P / button on the remotecontrol. But it cannot be selected using the SourCE button.

Seec e Sce

Sce ls

Mve Ee re

tVaV : ----S-ve : ----Cmpe : ----PC : ----hdMi : ----

ip

Sce ls : tV E nme

Mve Ee re

E nme

Mve Ee re

aV : ---- S-Ve : ---- Cmpe : ---- PC : ---- hdMi : ----

ip

Sce ls : tV E nme

Mve Ee re

E nme

Mve Ee re

----VCrdVdCbe StBhd StBSee StBaV recevedVd receve

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

25/33

Egs -

teee dece

Ms se ces cy eee, pes f we fm pve fm sc s:

teevs pmme mes.

news bes Wee fecss.

Sps ess.

Sbes f e f e.

te eee pes e ze cc s cees:

PaBCdE

F

CesSelected page number.Broadcasting station identity.Current page number or search status.Date and time.Text.

Status information.

Y c spy eee fm y me, b s ecepms be . oewse:

ifm my be mss.

Sme pes my be spye.

t cve e eee me spy e ces pe:

. Using the P ( ) or P ( ) button, select the channel providingthe teletext service.

. Press the ttx/Mix ( ) button to activate the teletext mode.The contents page is displayed. It can be redisplayed at any timeby pressing the MEnu ( ) button.

. Press the ttx/Mix ( ) button again.The actual broadcast will be displayed with "Teletext", "Double",and "Mix" in order on the screen.

. Press the tV( ) button to exit from the Text display.

If any broken character appears while Text is being viewed, makesure that the Text language is identical with the language in the"Setup" menu mode. If both languages are different, select the same language with the Textlanguage on the "Setup" menu.

dspy e teee ifm

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

26/33

Egs -

Selecting a Specifc Teletext Page

Pess e mbe bs e eme c ee epe mbe ecy:

. Enter the three-digit page number listed in the contents bypressing the corresponding numeric buttons.

. If the selected page is linked with several secondary pages, thesecondary pages are displayed in sequence. To freeze thedisplay on a given page, press the -/-- ( ) . Press the -/-- ( )button again to resume.

. Using the various display options:

t spy...

Both teletext information and the normal broadcast

Hidden text (answers to quiz games, for example)

The normal screen

A secondary page, by entering its 4-digit number

The next pageThe previous page

Double-size letters in the: Upper half of the screen Lower half of the screen

Normal screen

Pess e...

ttx/Mix ( )

inFo ( )

inFo ( )

dual i-ii ( )

P ( )P ( )

( ) Once Twice

Three times

us Fse Seec teee Pe

te vs pcs ce e eee pes ec-ce, c be seece by pess e cebs e eme c.

. Display the teletext contents page by pressing thettx/Mix ( ) button.

. Press the coloured button corresponding to the topic that youwish to select (The available topics are listed on the statusinformation line).

. Press the Red button to display the previous page.Press the Green button to display the next page.

. Press the tV( ) button to exit from the Text display.

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

27/33

Egs -

S teee Pes

Y c se p f eee pes spy em e ese.

. Select the LIST mode using the SourCE ( ) button.The SourCE ( ) button is used to switch between the LIST

and FLOF modes.. Press the coloured button corresponding to the page that will be

replaced.

. Enter the new page number using the numeric buttons.

. Repeat steps and for each page to be stored, using adifferent coloured button each time.

. Press the SlEEP( ) button until the corresponding blocks blink.

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

28/33

Egs -

te Wws spy-ses f ypc cmpe e sw bew. tec scees y PC my be ffee epe p y pcves f Wws y pc ve c. Eve f y cscees k ffee, e sme, bsc se-p fm w ppy

ms cses. (if , cc y cmpe mfce Smsdee.)

. First, click on "Control Panel" on the Windows start menu.

. When the control panel window appears, click on "Appearance and Themes"and a display dialog-box will appear.

. When the control panel window appears, click on "Display" and a display dialog-box will appear.

. Navigate to the "Settings" tab on the display dialog-box.The correct size setting (resolution):Optimum- 1440 X 900

If a vertical-frequency option exists on your display settings dialog box, the correct value is

"60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.

Se p Y PC Sfwe (Bse Wws xP)

dspy Mes

B scee ps sze w vy epe e ype f PC m s es.te ess e be e ecmmee. (a ess bewee e sppe ms esppe)

Me res hz

Feqecy (khz)

Vec

Feqecy (hz)

Pe Cck

Feqecy (Mhz)

Syc Py

(h/V)

iBM 720 x 400

640 x 480

31.469

31.469

70.087

59.940

28.322

25.175

- / +

- / -

VESa 640 x 480

640 x 480

800 x 600

800 x 600

1024 x 768

1024 x 768

1024 x 768

1280 x 1024

1280 x 1024

1440 x 900

37.861

37.500

37.879

48.077

48.363

56.476

60.023

63.981

79.976

55.935

72.809

75.000

60.317

72.188

60.004

70.069

75.029

60.020

75.025

59.887

31.500

31.500

40.000

50.000

65.000

75.000

78.750

108.00

135.00

106.50

- / -

- / -

+ / +

+ / +

- / -

- / -

+ / +

+ / +

+ / +

- / +

The interlace mode is not supported.

The set might operate abnormally if a non-standard video format is selected.

HDMI/DVI does not support PC function.

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

29/33

Egs -

Se e PC

Cse Fe t f e ime (ime lck):te ppse f pce qy jsme s emve ece pce se.if e se s emve by Fe- e, e jse feqecy s bes s pssbe (cse) Fe-e .

afe e se s bee ece, e-js e pce s s e e cee f scee.

. Preset: Press the SourCE button to select PC mode.

. Press the MEnu button to display the menu.Press the or button to select "Setup", then press theEntEr button.

. Press the or button to select "PC", then press theEntEr button.

. Press the EntEr button to select "Image Lock".

. Press the or button to select "Coarse" or "Fine", thenpress the EntEr button.

. Press the or button to adjust the screen quality.Press the EntEr button.


C e ime Ps:ajs e PCs scee ps f es f etV scee.

. Follow the "Coarse and Fine Tuning of the Image(Image Lock)" instructions number 1 to 3.

. Press the or button to select "Position", then press the

EntEr button.. Press the or button to adjusting the Vertical-Position.

Press the or button to adjust the Horizontal-Position.Press the EntEr button.


iz e ime Ses (ime rese):Y c epce me ses w e fcy efves.


. Press the or button to select "Image Reset", then pressthe EntEr button.


ajs e PC Scee amcy (a ajsme):a jsme ws e PC scee f se sef-js e cm PC ve s. te ves f fe, cse ps e jse mcy.


. Press the or button to select "Auto Adjustment", thenpress the EntEr button.


Sep

P & Py le tme Be Scee PC

Mve Ee re

PC

ime lck Ps ime rese a ajsme

Mve Ee re

ime lck

Mve Ee re

CseFe

0

PC


Mve Ee re

Ps

ajs Ee re

PC


Mve Ee re

PC


Mve Ee re

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

30/33

Egs -

hw ajs e S

. Place the front of the TV onto a soft cloth orcushion on a table as in Figure (1).- Align the TV bottom along the table edge.

. Press on the center of the TV back. Adjust the

stand as in Figure (2) while pressing the buttonon the back of the stand.

. Place the TV on the table so that the TV sitssafely.

hw ajs e ae f e tV

When you adjust the stand, press the button on the back of the stand.

. Figure (1) shows the adjustment angle (-2~14) when you use the LCD on its stand.Excessive tilting can turn the LCD TV over which may cause damage.

. Figure (2) shows the adjustment angle (14~80) when you convert the LCD from stand-based use

to wall-mount.. Figure (3) shows the adjustment angle (0~10) when you mount the LCD TV to a wall.

You will hear a Click sound when changing the angle from 1 to 2 or 3 to 2.

(1) Angle adjustment whenusing the TV on its stand.

(2) Angle adjustment when convertingfrom Stand to Wall mount (1 3, 3 1)

(3) Angle adjustment when LCDTV is wall-mounted

Button

(1) (2)

is e W M K

Wall mount items (sold separately) allow you to mount the TV on the wall. For the detailed information oninstalling the Wall Mount, see the instruction in the Wall Mount items. Contact a technician for installingthe wall bracket. Samsung Electronics is not responsible for any damage to the product or injury toyourself or others if you elect to install the TV on your own.

Do not install your Wall Mount Kit while your TV is on. This may result in personal injury due toelectric shock.

is VESa cmp m evces

. Place the TV down on a soft cloth or cushion on atable.

. Adjust the stand, pressing the button on the back ofthe stand.

. Align the mounting interface pad (not supplied) with

the holes in the stand bottom and secure it with thefour screws that come with the arm-type base, wallmount hanger or other bases (not supplied).

Button Mounting pad(sold separately)

(2) (3)

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

31/33

Egs - 9

tbes: Befe Cc Sevce Pese

No sound or picture Check that the mains lead has been connected to a wall socket.

Check that you have pressed the PoWEr button on the front of the set.

Check the picture contrast and brightness settings.

Check the volume.

Normal picture but no sound Check the volume. Check whether the MutE button has been pressed on the remote control.

Screen is black and power

indicator light blinks steadily

On your computer check; Power, Signal Cable.

The TV is using its power management system.

Move the computers mouse or press any key on the keyboard.

No picture or black and white

picture

Adjust the colour settings.

Check that the broadcast system selected is correct.

Sound and picture

interference

Try to identify the electrical appliance that is affecting the set and move it

further away.

Plug your set into a different mains socket.

Blurred or snowy picture,

distorted sound

Check the direction, location and connections of your aerial.

This interference is often due to the use of an indoor aerial.

Remote control

malfunctions

Replace the remote control batteries.

Clean the upper edge of the remote control (transmission window).

Check the battery terminals.

"Check signal cable."

message is displayed.

Check that the signal cable is firmly connected to the PC or video sources.

Check that the PC or video sources are turned on.

On PC mode, "Not Supported

Mode." message is displayed.

Check the maximum resolution and the frequency of the video adaptor.

Compare these values with the data in the Display Modes.

The TFT LCD panel uses a panel consisting of sub pixels (3,888,000) which require sophisticated technology to produce.However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of theproduct.

us e dec Cves

. When installing the TV on the wall without usingthe stand, insert decoration covers into the holesas described in the picture (1).

. After inserting the decoration covers, fasten themwith 4 screws as described in the picture (2).

(2)(1)

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

32/33

Egs - 0

Technical and Environmental Specifcations

Me nme la9r

Scee Sze (dg) 19 inches

PC res 1440 x 900 @ 60Hz

SOutput

3W x 2

dmes (Wdh)BodyWith stand

485 x 58 x 369 mm

485 x 200 x 408 mm

WegWith stand

5.6 kg

Evme CsesOperating TemperatureOperating HumidityStorage Temperature

Storage Humidity

10 C to 40 C (50 F to 104 F)

10% to 80%, non-condensing-20 C to 45 C (-4 F to 113 F)

5% to 95%, non-condensing

Design and specications are subject to change without prior notice.This device is a Class B digital apparatus.For the power supply and Power Consumption, refer to the label attached to the product.

7/31/2019 7ed0c9204d2324822dcb92f20bb1212b

33/33

This page is intentionally

left blank.

Date post:	04-Apr-2018
Category:	Documents
Upload:	agrani1234
View:	215 times
Download:	0 times

7ed0c9204d2324822dcb92f20bb1212b

Documents