Material handling machine

PRELIMINARY

TIER I

Vf em

ission

stand

ards

25 m

261 kW / 268 kW

102–135 t

2

Technical data, equipment R

SLEWING DRIVEGearbox Compact planetary gear with slant-axis hyd-

raulic motor, integrated brake valves

Parking brake Spring-loaded multi-disk brake

Slewing ring External gear slewing ring with 360° protec-tion and pinion gear lubrication

Slewing speed 0–5 rpm, variable

UPPERCARRIAGEDesign Torsion-resistant box design, precision crafted,

steel boom bushingsVery service-friendly design, longitudinal engine

Central lubrication

Automatic central lubrication for equipment and slewing gear raceway

Electrical system

Central electrical distributor, battery disconnect switch

Cooling system 3-circuit cooling system with high cooling output, thermostatically regulated fan drive for oil cooler and water cooler, fan reversal for cleaning

Options Slewing gear brake via foot pedal Peripheral uppercarriage railing for additional safety

LED lighting package Fire extinguisher Maritime climate varnish as corrosion protection

Electric heater for hydraulic tank Low-temperature package for use at temperatures below -20 °C

Hydraulically driven magnetic generator 15 kW/20 kW

HYDRAULIC SYSTEMLoad sensing/LUDV hydraulic system, hydraulicpilot-controlled work functions, load limit sensing control

Pump type Swashplate-type variable-displacement piston pump, load pressure-independent fl ow distri-bution for simultaneous, independent control of work functions

Pump control Zero-stroke control, on-demand fl ow control – the pumps only pump as much oil as will actually be used, pressure purging, load limit sensing control

Operating pressure

max. 350 bar

Filtration High-performance fi ltration with long change interval

Hydraulic tank 900 lControl system Proportional, precision hydraulic actuation of

work movements, 2 hydraulic servo joysticks for the work functions, additional functions via switches and foot pedals

Safety Hydraulic circuits with safety valves, secured emergency lowering of the equipment at engine standstill, pipe fracture safety valves for lift cylinder and stick cylinder

Options Bio-oil – environmentally friendly ToolControl for programming the pressure/rate for up to 10 tools

Additional hydraulic circuit for shear attach-ment

Load moment warning with capacity utili-zation indicator

Overload safeguard with shutdown 60 μm pressure fi lter for attachments 3 μm hydraulic micro-fi lter - SENNEBOGEN HydroClean

ENGINEPower 261 kW/355 hp at 1,800 rpm (TIER IVf)

268 kW/364 hp at 1,500 rpm (TIER IIIa)

Model Cummins QSL 12-C350 Stage IVDirect injection, turbocharged, charge-air coo-ler, reduced emissions, EcoMode, automatic idle, auto-stop, fuel preheating

Cooling Water-cooled, cooler fan reversal

Diesel fi lter With water separator and heating system

Air fi lter Dry fi lter with integrated pre-separator, automatic dust discharge, main element and safety element, contamination indicator

Fuel tank 1000 lDEF tank 100 lElectrical system

24 V

Batteries 2 x 180 Ah, battery disconnect switchOptions Engine block heater

Electric fuel pump

MACHINE TYPEModel (type) 870

PRELIMINARY

3

Technical data, equipment

Subject to change.

R

ATTACHMENTSDesign Decades of experience, state-of-the-art

computer simulation, highest level of stabili-ty, longest service life, large-dimensioned and low-maintenance bearing points, sealed special bearing bushes, precision-crafted, quick-release couplings on the connections - open/close/rotate grapple

Cylinders Hydraulic cylinders with high-quality sealing and guide elements, end position damping, sealed bearing points

Options Ball valves in the hydraulic lines for quick and easy grapple switching

Kinematics position II for greater working depth

Maritime climate varnishing Maritime climate coating of all cylinders, nickel-plated and chrome-plated

Float position of the equipment Hoisting limiter / stick limitation adjustable for stop settings, e.g. in the hall

CAB Cab type Hydraulically elevating cab E270

Cab equipment Sliding door, excellent ergonomics, automatic climate control, heated, air-suspension com-fort seat, fresh/circulating air fi lter, joystick control, 12 V/24 V connections, SENCON

Options Cab E300/260 can be elevated 300 cm and moved forward 260 mm hydraulically

Auxiliary heating system with timer Active charcoal cab fi lter for fresh/recircu-lating air ideal for waste recycling applica-tions

Steering wheel with adjustable steering column

Sliding window in operator door Armored glass windshield, additional safety

Armored glass roof window, additional safety

Safety side window and rear window Floor window for a better view Rolling shade for roof window and winds-hield

Protective roof grating FOPS protective roof grating Protective front grating Radio and CD player with speakers Enlarged industrial cab with undivided armored glass windshield

ELECTRIC DRIVE Option Power: 250 kW, 400 V, 50 Hz

Total connected load: 270 kVA, 355 A fuse not included (alternatively 400 A with magnet system) for 400 V – star-delta motor starter

Advantages: Lowest operating costs, quiet and virtually vibration-free work, long service life of hydraulic components

OPERATING WEIGHTMass

Notice

approx. 93,500 kg870 R basic machine withK18 equipment and3,000 l multi-shell grab

Operating weight variesby design.

UNDERCARRIAGEDesign Wide-gauge crawler undercarriage in a stab-

le, torsion-resistant box design.

Drive Hydraulic traction drive for each crawler integrated in the chassis and connected by a compact planetary gear to an axial piston motor.

Parking brake Spring-loaded, hydraulically ventilated disk brakes. Hydraulic brake valves protect the traction motors when going downhill.

Traveling gear R83-450 telescopic crawler undercarriage with 2.8–4.5 m mechanical track adjustment and maintenance-free B8b C63 crawler track, 7,000 mm long, with canted 800 mm triple grouser track shoes.

Speed 0 - 1.6 km/h Level I: 0 - 3 km/h Level IIOptions Maintenance-free B8b crawler track with

rounded 900 mm fl at track shoes Maintenance-free B8b crawler track with canted 900 mm triple grouser track shoes

R90-550 special undercarriage with integ-rated 2 m pylon

P136-585 crawler gantry with 5 m clearance

PRELIMINARY

4

Load ratings

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

-2

-3

-4

-5

-6

-7

-8

-9

-10

12,512,5

11,11 66

10,5,5

12,5

14,3 11,1 55555

Undercarriage R83-450 Compact boom 10.8 mLoading stick 7.8 m

Cab Maxcab E300/260, hydraulic elevation and tilt feature

Technical features and dimensions subject to change.

Machine shown reversed

R

All values are in tons (t) and are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required ope-rating temperature in the Green Hybrid system. They apply 360° on solid, level ground. Safe working loads include attachments such as multi-shell grapples, magnets, etc. According to harmonized EU standard EN 474-5, hydraulic excavators used for lifting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.

PRELIMINARY

K18

20160126143625

5

Load ratings

Technical features and dimensions subject to change.

Undercarriage R83-450 Compact boom 11.8 mLoading stick 8.8 m

Cab Maxcab E300/260, hydraulic elevation and tilt feature

R

All values are in tons (t) and are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required ope-rating temperature in the Green Hybrid system. They apply 360° on solid, level ground. Safe working loads include attachments such as multi-shell grapples, magnets, etc. According to harmonized EU standard EN 474-5, hydraulic excavators used for lifting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.

PRELIMINARY

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

-2

-3

-4

-5

-6

-7

-8

-9

-10

17,27,2

19,3

12,2 0,410,410,4

,410,40,4

K20

Machine shown reversed

20160126143720

6

Load ratings

Undercarriage R90-550Pylon 3.0 m

Compact boom 12.5 mLoading stick 10.8 m

Cab Skylift 900 with Maxcab Industry, cab with hydraulic elevation feature (option)

Technical features and dimensions subject to change.

R

All values are in tons (t) and are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required ope-rating temperature in the Green Hybrid system. They apply 360° on solid, level ground. Safe working loads include attachments such as multi-shell grapples, magnets, etc. According to harmonized EU standard EN 474-5, hydraulic excavators used for lifting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.

PRELIMINARY

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

28

27

26

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

-2

-3

-4

-5

-6

-7

-8

11,2,11 22

9,9,99,55

K22

Machine shown reversed

20160126150946

7

Load ratings

.

Technical features and dimensions subject to change.

Undercarriage ST88Pylon 3.0 m

Compact boom 14.0 mLoading stick 12.3 m

Cab Skylift 700 with Mastercab, cab with hydraulic elevation feature (option)

R

All values are in tons (t) and are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required ope-rating temperature in the Green Hybrid system. They apply 360° on solid, level ground. Safe working loads include attachments such as multi-shell grapples, magnets, etc. According to harmonized EU standard EN 474-5, hydraulic excavators used for lifting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.

PRELIMINARY

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

30

29

28

27

26

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

-2

-3

-4

-5

-6

-7

-8

-9

-10

12,61 6

9,99 99

11,7,7

12,21

5555

8,33

7,,66

K25

Machine shown reversed

20160126163349

8

Load ratings

Technical features and dimensions subject to change.

Undercarriage R83-450 Compact boom 13.5 mLoading stick 9.8 m

Cab Maxcab E300/260, hydraulic elevation and tilt feature

R

All values are in tons (t) and are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required ope-rating temperature in the Green Hybrid system. They apply 360° on solid, level ground. Safe working loads include attachments such as multi-shell grapples, magnets, etc. According to harmonized EU standard EN 474-5, hydraulic excavators used for lifting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.

PRELIMINARY

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

-2

-3

-4

-5

-6

-7

-8

-9

-10

-11

-12

-13

-14

8,1118,1188,1 15,8,8,8115 8

10,31 310 31010

9,9 7

66666

7

5

20160126144749

Machine shown reversed

B21

9

Load ratings

Technical features and dimensions subject to change.

Undercarriage R90-550Pylon 1.0 m

Compact boom 13.5 mLoading stick 9.8 m

Cab Maxcab E300/260, hydraulic elevation and tilt feature

R

All values are in tons (t) and are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required ope-rating temperature in the Green Hybrid system. They apply 360° on solid, level ground. Safe working loads include attachments such as multi-shell grapples, magnets, etc. According to harmonized EU standard EN 474-5, hydraulic excavators used for lifting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.

PRELIMINARY

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

-2

-3

-4

-5

-6

-7

-8

-9

-10

-11

-12

23,33

19,21

10,010,

9,449 449 4

9,5

9,7

9,9

10,910 9

10,9

10,88

9,44

20160126144335

Machine shown reversed

B21

10

Load ratings

Technical features and dimensions subject to change.

RPRELIMINARY

Undercarriage R90-550Pylon 2.0 m

Compact boom 13.5 mLoading stick 12.3 m

Cab Skylift 700 with Mastercab, cab with hydraulic elevation feature (option)

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

26

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

-2

-3

-4

-5

-6

-7

-8

-9

-10

-11

-12

11,2

0,999910,90,9

9,999

10,1

55555

0

33

20160126150530

Machine shown reversed

B24

All values are in tons (t) and are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required ope-rating temperature in the Green Hybrid system. They apply 360° on solid, level ground. Safe working loads include attachments such as multi-shell grapples, magnets, etc. According to harmonized EU standard EN 474-5, hydraulic excavators used for lifting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.

11

Load ratings

Technical features and dimensions subject to change.

RPRELIMINARY

Undercarriage R90-550Pylon 3.0 m

Compact boom 13.5 mLoading stick 12.3 m

Cab Skylift 700 with Mastercab, cab with hydraulic elevation feature (option)

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

28

27

26

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

-2

-3

-4

-5

-6

-7

-8

-9

-10

-11

-12

21,8221,8 18,21

1111

0

1

20160126150356

Machine shown reversed

B24

All values are in tons (t) and are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required ope-rating temperature in the Green Hybrid system. They apply 360° on solid, level ground. Safe working loads include attachments such as multi-shell grapples, magnets, etc. According to harmonized EU standard EN 474-5, hydraulic excavators used for lifting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.

12

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

28

27

26

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

-2

-3

-4

-5

-6

-7

-8

-9

-10

-11

-12

22,6622222 18,7

Load ratings

Technical features and dimensions subject to change.

R

Undercarriage P136-585 Compact boom 13.5 mLoading stick 12.3 m

Cab Skylift 700 with Mastercab, cab with hydraulic elevation feature (option)

Machine shown reversed

B24

20160126150743

All values are in tons (t) and are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required ope-rating temperature in the Green Hybrid system. They apply 360° on solid, level ground. Safe working loads include attachments such as multi-shell grapples, magnets, etc. According to harmonized EU standard EN 474-5, hydraulic excavators used for lifting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.

PRELIMINARY

13Technical features and dimensions subject to change.

Dimensions R

870 R with R83-450 undercarriage and Maxcab E300/260 with hydraulic elevation and tilt feature

870 R with R83-450 undercarriage and Maxcab E270 with hydraulic elevation feature

3600(Transport)

1370

525

(675) 3400

4500

5300

5630

2800

3600(Transport)

800

1370

525

(675) 3400

4500

5300

5630

2800

5850

7000

4460

4400

3610

6270

34402600

3725 44

60

4400

3626

3000

6650

344034403440260026002600

3725

3725

3725 44

6044

6044

60

440044004400

3626

3626

3626

3000

3000

3000

PRELIMINARY

14

Dimensions

Technical features and dimensions subject to change.

RPRELIMINARY

870 R with R90-550 undercarriage, Skylift 700, Mastercab with hydraulic elevation feature, and 2.0 m pylon

870 R with R90-550 undercarriage, Maxcab E300/260 with hydraulic elevation and tilt feature, and 1.0 m pylon

6020

6570

3000

9570

4568

6640 73

75

4415

6890

8030

5600

3335

3465

7600

5570

5500

6400

6695

5085

5560

5500

550

6400

6695

3370

3400

5560

15Technical features and dimensions subject to change.

Dimensions R

870 R with P136-585 undercarriage, Skylift 900 and Maxcab Industry cab with hydraulic elevation feature

870 R with ST88 undercarriage, Skylift 700, Mastercab with hydraulic elevation feature, and 3.0 m pylon

44155820

54003

335

5600

9155 98

95

72808425

2175

4395

4765

6350

1133

490

4914

5500

6500

3400

5560

5135

5000

7090

3650449058507210

9000

3400

5560

PRELIMINARY

16

Dimensions R

870 R with R90-550 undercarriage, Skylift 900 and Maxcab Industry cab with hydraulic elevation feature

5500

6400

6695

900 608

5

441565

70

4395

4

1101

0

9100

550

Technical features and dimensions subject to change.

PRELIMINARY

17Technical features and dimensions subject to change.

Transport dimensions R

Load boom Grapple stick Transport length (L) Transport height (H)

K18 10.8 m 7.8 m 15.85 m 3.90 mK20 11.8 m 8.8 m 16.9 m 4.00 m21b 13.5 m 9.8 m 18.3 m 3.95 m*

L

H

* Stick removed

PRELIMINARY

18

Recommended grapples

Dimensions in [mm]

Design / sizeGrapple capa-

city

Weight1 Maximum load capacityShell shape 2

HO G

SGM l kg kg t800.50 800 2420 2610

10.0

1000.50 1000 2480 2655

1500.50 1500 2645 2930

2000.50 2000 2800 3160

2500.50 2500 3130 3615

3000.50 3000 3250 3875

3500.50 3500 3420 4140

Type series / model Power DeadweightBreakaway

forceLoad-bearing capacity in kg

WOKO kW kg kN Slab(safety factor 2)

S-RLB 15 11.7 2400 380 19000

S-RLB 17 17.8 3300 640 32000

S-RLB 19 22.0 5090 790 39500

Recommended magnetic generator: 20–25 kW

SGM multi-shell grab (5 shells)

Design / size Grapple capacity Weight1 Maximum load capacity

SGZ l kg t

2500.60 2500 3350

12.03000.60 3000 3530

3500.60 3500 3720

4000.60 4000 3920

Double-shell grab SGZ

Magnetic plates

SGM multi-shell grab (4 shells)

1) Weight information without grapple suspension , stick bolts, hose system

2) Half-open shells: shell sheet steel width 400 mm, 500 mm wide for 1250 l capacity and higher

*) Available upon request

Design / sizeGrapple capa-

city

Weight1 Maximum load capacityShell shape

HO G

SGM l kg kg t800.50-4 800 2245 2490

10.01000.50-4 1000 2345 2585

1500.50-4 1500 2475 2830

2000.50-4 2000 2660 3075

Detailed information on grapples, as well as log grapples, quick-release systems, and other attachments can be found in the "Attachments" brochure

RPRELIMINARY

19

www.sennebogen.com

SENNEBOGEN Maschinenfabrik GmbH Sennebogenstraße 1094315 Straubing, Germany

Tel. +49 9421 540-144/146Fax +49 9421 43 882marketing@sennebogen.de

This catalog describes machine models, scopes of equipment of individual models, and confi guration options (standard equipment and optional equipment) of the machines supplied by SENNEBOGEN Maschinenfabrik. Machine illustrations can contain optional equipment and supplemental equipment. Actual equipment may vary depending on the country to which the machines are delivered, especially in regard to standard and optional equipment. All product designations used may be trademarks of SENNEBOGEN Maschinenfabrik GmbH or other supplying companies, and any use by third parties for their own purposes may violate the rights of the owners.Please contact your local SENNEBOGEN sales partner for information concerning the equipment variants off ered. Requested performance characteristics are only binding if they are expressly stipulated upon conclusion of the contract. Delivery options and technical features are subject to change. Errors and omissions excepted. Equipment is subject to change, and rights of advancement are reserved. © SENNEBOGEN Maschinenfabrik GmbH, Straubing/Germany. Reproduction in whole or in part only with written consent of SENNEBOGEN Maschinenfabrik GmbH, Straubing, Germany.

Orde

r no.

195

302

870R

-E-0

4161

5

/ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages false /GrayImageMinResolution 150 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 333 /GrayImageDepth -1 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 1.31832 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages false /MonoImageMinResolution 1200 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Average /MonoImageResolution 300 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /FlateEncode /MonoImageDict > /AllowPSXObjects false /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile (None) /PDFXOutputConditionIdentifier (FOGRA27) /PDFXOutputCondition () /PDFXRegistryName (http://www.color.org) /PDFXTrapped /False

/CreateJDFFile false /Description > /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ > > /FormElements true /GenerateStructure false /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles true /MarksOffset 6.000950 /MarksWeight 0.250000 /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /WorkingCMYK /PageMarksFile /RomanDefault /PreserveEditing true /UntaggedCMYKHandling /UseDocumentProfile /UntaggedRGBHandling /UseDocumentProfile /UseDocumentBleed false >> ]>> setdistillerparams> setpagedevice