Date post: | 19-May-2015 |
Category: |
Education |
Upload: | cloneskills |
View: | 17,364 times |
Download: | 4 times |
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 1
SAP BPC NW 10.0|7.5 KNOWLEDGEBASE
SCRIPT LOGIC IMPLEMENTATION GUIDE
A SAP EPM/BPC Community Service
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 2
Table of Contents
Executive Summary: ..................................................................................................... 3
Business Scenario: ........................................................................................................ 3
Data Model: .................................................................................................................. 4
Solutions Building Blocks: ............................................................................................ 5
Script Logic - Structure: .............................................................................................. 12
Script Logic – Implemention Steps: ........................................................................... 13
List of Script Logic Commands: .................................................................................. 14
Script Logic in Action .................................................................................................. 16
Debugging Script Logic ............................................................................................. 120
Benefits of Script Logic ............................................................................................. 125
Golden Rules of Script Logic .................................................................................... 126
Appendix 1 : Calling Script Logic – Various Options ............................................... 127
Disclaimer: ................................................................................................................. 132
_______________________________________________________________________ .
SAP Community Contributors: ........................................................................... 132
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 3
Executive Summary:
The purpose of this document is to demonstrate the implementation of script logic in real-
life projects, which includes designing, creating, executing and debugging Script Logic in a
SAP BPC 10. /7.5 NW environment. This document educates the user only the essential
topics that are required to solve practical problems and it expose the user to the Script
Logic commands that are widely used in any business process automations such as
� Budget Allocation
� Revenue Distributions
� Cost Calculations
� Revenue and Cost Implementation Impact of Financial Statements
� Scenario (“What If”) Analysis
� Adjustment to plan to formalizing forecasting
It is assumed that the user has basic knowledge/understanding about SAP BPC NW
10.0/7.5 version.
Business Scenario:
CloneSkills, Inc. automates their Sales Revenue Planning process through SAP BPC NW 7.5
software and here, we are using SAP BPC’s core function of Script Logic to perform key
business calculations and also automatic data management. Also it has been identified to
implement a special requirements on the planning calculations and distribution.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 4
SAP BPC Solutions - Data Model:
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 5
Solutions Building Blocks:
1. AppSet : MURUGESAN
2. Application : SR_PLANNING (FINANCE/REPORTING type)
3. Dimensions Used :
Dimension Name Dimension Type User Defined Properties
SR_ACCOUNT Account
SR_CATEGORY Category
SR_ENTITY Entity SPECIAL_DISCOUNT(1)
SR_RPTCURRENCY Currency
SR_TIME Time
SR_PRODUCT UserDefined AGENT_COMMISSION(1)
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 6
Dimensions - SR_ACCOUNT
The following image shows the member sheet of SR_ACCOUNT dimension:
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 7
Dimensions - SR_CATEGORY
The following image shows the member sheet of SR_CATEGORY dimension:
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 8
Dimensions - SR_ENTITY
The following image shows the member sheet of SR_ENTITY dimension:
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 9
Dimensions - SR_RPTCURRENCY
The following image shows the member sheet of SR_RPTCURRENCY dimension:
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 10
Dimensions - SR_TIME
The following image shows the member sheet of SR_TIME dimension:
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 11
Dimensions - SR_PRODUCT
The following image shows the member sheet of SR_PRODUCT dimension:
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 12
Script Logic - Structure:
Script Logic code can be broken down into 3 components:
1. Scoping [ the data on which the Logic is to be applied]
2. Body/Code[ the processing/logic to be applied to the data]
3. Saving/writing the record.
The following code snippet shows the three parts:
We will be discussing all of the above sections in details of the above in a short while.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 13
Script Logic – Implementation Steps (Sample):
� Step # 1: Launch BPC Admin client and implement Application, Dimensions and
Members.
� Step # 2: In BPC Admin, Go to SR_PLANNING (Note: need to use your own application)
application’s Script Logic folder. Create a new Logic file. Validate and Save it.
� Step # 3: In BPC Admin, Go to SR_PLANNING (Note: You need to use your own application)
application’s Script Logic folder. Look for Default.lgf. If it does not exist, create a
new one. Validate and Save it.
� Step # 4: In BPC Admin, Inside Default.lgf file, include the just created Logic file.
Validate and Save it.
� Step # 5: In BPC Admin, launch Interface for Excel. Connect to SR_PLANNING (Note:
need to use your own application) application.
� Step # 6: Verify the data using EVDRE () command or using the Report Template(s)
provided by SAP.
Note:
� Instead of having a separate logic file, the code can be put into the Default.lgf file
and it will get executed when data is sent to the BPC server. This may not be a good
practice and may not be manageable if the script has lots of lines of code.
� These are all sample steps, there are several different ways to implement a Script
logic
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 14
List of Script Logic Commands (Sample):
Script Logic commands can be grouped into 3 categories as follows:
Scoping Commands
1. *XDIM_MEMBERSET
2. *XDIM_ADDMEMBERSET
3. *XDIM_MAXMEMBERS
4. *XDIM_FILTER
Body/Code/Processing Commands
5. *INCLUDE
6. *WHEN/ENDWHEN
7. *REC
8. TMVL Parameter
9. *SELECT
10. *SELECTCASE/ENDSELECT
11. *FOR / *NEXT
12. *ADD / *ENDADD
13. *BEGIN / *END
14. *FUNCTION / *ENDFUNCTION
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 15
15. *SUB / *ENDSUB
16. *LOOKUP
17. *RUNALLOCATION
Saving Commands
18. COMMIT
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 16
Script Logic in Action:
1. *XDIM_MEMBERSET
Syntax:
*XDIM_MEMBERSET {Dimension name} = {Members Set}
*XDIM_MEMBERSET {Dimension}<>{MemberSet}
Description:
*XDIM_MEMBERSET defines the scope of the data in which the subsequent business
logic is applied.
Example:
*XDIM_MEMBERSET SR_ACCOUNT = TOP_PER_UNIT
*XDIM_MEMBERSET SR_CATEGORY = PLAN
*XDIM_MEMBERSET SR_ENTITY = USA
*XDIM_MEMBERSET SR_PRODUCT = LAPTOP
*XDIM_MEMBERSET SR_RPTCURRENCY = LC
*XDIM_MEMBERSET SR_TIME = 2006.JAN
Business Scenario: Increase the discount given to the PRODUCT [LAPTOP] by 10% and book the value to
the SPL_DISCOUNT [ACCOUNT] for PLAN data for the period – 2006, JAN.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 17
Implementation Steps:
I) Launch BPC Administration client and connect to AppSet – MURUGESAN.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 18
II) Enter login info and click Finish button.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 19
III) Under the AppSet – MURUGESAN, go to the folder Application�SR_PLANNING�Script
Logic, and click the link Create New Logic which appears on the right.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 20
IV) On the following screen, enter Logic Name as LOGIC_1 and click OK button.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 21
V) On the following screen, enter the code(as mentioned below) and click the link Validate
and Save which appears on the right.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 22
VI) You will be prompted with the Confirmation message(as shown below). Click OK.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 23
VII) Now, go to the folder : Application�SR_PLANNING�Script Logic, and look for the file
– Default.lgf file. If it does not exist, create a new one and enter the code as mentioned
below:
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 24
VIII) Click Validate and Save link on the right and respond to the subsequent
confirmation prompt.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 25
IX) Launch Interface for Excel from BPC Administration client. Choose the options as
shown below and click OK button.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 26
X) On the following screen, enter login info and click on the Finish button.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 27
XI) Now, make sure that the Current View(CV) looks like the following:
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 28
XII) Now, click on the Data Input line which appears on the right. And, then click on the link
– Build a schedule using a dynamic template. You will be prompted with a dialog box
as shown below:
Select the Input schedule template – Account Trend. And, click Open button.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 29
XIII) The following confirmation prompt will be shown and just click OK button.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 30
XIV) As shown below, enter data for Discount account and click the button at the top –
Send and Refresh Schedules.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 31
XV) In the following screen, as shown below, click Refresh button.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 32
XVI) Subsequently, the following prompt is shown. Click Yes button.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 33
XVII) The following screen is shown. Click Close button.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 34
XVIII) Following screen shows the value – 5, which is 10% of 50[ DISCOUNT Account], in
the Special Discount Account.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 35
2. *XDIM_ADDMEMBERSET
Syntax :
*XDIM_ADDMEMBERSET {dimension} = {members set}
Description:
*XDIM_ADDMEMBERSET allows you to add/join/union members to the data region
already passed by *XDIM_MEMBERSET command. This is different from
*XDIM_MEMBERSET command in that, the data region defined by subsequent
*XDIM_MEMBERSET overrides the data region defined by earlier *XDIM_MEMBERSET.
Example:
*XDIM_MEMBERSET SR_TIME=BAS(2006.Q1)
*XDIM_ADDMEMBERSET SR_TIME=2006.APR
Business Scenario:
Calculate special discount and copy it to 2006 first quarter. And also, calculate and copy the
same to 2006.Apr.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 36
2.1 Create a new logic file – LOGIC_ADDMEMBER as follows:
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 37
2.2 Enter discount data for 2006.APR as below. Take note of the current view here.
Point Default.LGF to LOGIC_ADDMEMBER.LGF
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 38
2.3 Open an Input schedule template(Account Trend). Here, the current view should point
to 2006.Q1. Enter discount data for first quarter of 2006. Click Send and Refresh
Schedules.
Here, the data(discount) is entered for 2006.Q1(Jan, Feb and Mar) months and the scope
of the member set is defined as BAS(2006.Q1). As the requirement is to calculate for
2006.Apr also, the XDIM_ADDMEMBERSET SR_TIME=2006.APR is included to add more
members (2006.APR) to define the scope.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 39
2.4 Now, change the memberset parameter for SR_TIME as 2006.JAN, 2006.FEB,
2006.MAR and 2006.APR. Click Expand All now.
This will show the calculation of special discount for 2006’s first quarter and also for
2006.APR as shown below:
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 40
3. *XDIM_MAXMEMBERS
Syntax :
*XDIM_MAXMEMBERS {dimension} = {max number of members}
Description:
When there are too many records to be processed, *XDIM_MAXMEMBERS can be used
to do batch processing, i.e. you can tell the server to process the first batch of
records(say 100 records) and when that is completed, next batch can be started. This
stops the server from slowing down which arises when too many records are being
processed in-memory.
Example:
*XDIM_MEMBERSET SR_CATEGORY=ACTUAL
*XDIM_MEMBERSET SR_TIME=2005.JAN
*XDIM_MEMBERSET SR_ACCOUNT=QTY,U_PRICE,U_COST
*XDIM_MAXMEMBERS SR_PRODUCT=5
*WHEN SR_ACCOUNT
*IS "QTY"
*REC(EXPRESSION=%VALUE%*1.1,SR_CATEGORY=PLAN,SR_TIME=2006.JAN)
*IS "U_PRICE","U_COST"
*REC(EXPRESSION=%VALUE%,SR_CATEGORY=PLAN,SR_TIME=2006.JAN)
*ENDWHEN
*COMMIT
The above example processes 5 Products at a time. Once that is completed, it picks the
next 5 Products and it goes on like that.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 41
4. *XDIM_FILTER
Syntax :
*XDIM_FILTER {Dimension name} = { Dimension name }.properties(“Property Name”) =
“Property Value”
Description:
This command selects all the members satisfying the condition.
Example:
*XDIM_FILTER SR_ENTITY=[SR_ENTITY].properties("SPECIAL_DISCOUNT")="Y"
Business Scenario:
Calculate special discount which is 10% of discount for first quarter of 2006 for the entities for
which, the special discount property is “Y”.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 42
4.1 Create a logic file – LOGIC_FILTER.LGF as follows: Point Defalut.LGF to LOGIC_FILTER.LGF.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 43
4.2 Open an input schedule(Nested Rows)as shown below. Specify the member set parameter
as DISCOUNT, SPL_DISCOUNT for SR_ACCOUNT. Click Expand All button. In the following
screen, enter DISCOUNT FOR India, Singapore and Germany.
Note that ONLY India and Germany are having SPECIAL_DISCOUNT property as “Y”.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 44
4.3 Now, enter the discount data for India, Singapore and Germany. And, click the Send and
Refresh Schedules.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 45
4.4 The following screen shows the special discount only for India and Germany.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 46
5. *INCLUDE
Syntax :
*INCLUDE {Logic file Name}
Description:
Multiple files can be put into a single logic file and this file can then be included in the main
logic file. When .LGF file is generated, main logic file is stuffed with the code in the included
logic file.
Example:
*INCLUDE LOGIC_SUB.LGF
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 47
6. *WHEN / *ENDWHEN
Syntax :
*WHEN {criteria}
*IS [=]{value1}[,{value2},…] | <>{value}
*REC(FACTOR={Real number}|EXPRESSION={Expression}[,{dim1}={member},{dim2}=…])
[ *REC(FACTOR={Real number}|EXPRESSION={Expression}[,{dim1}={member},{dim2}=…])]
[*ELSE]
*ENDWHEN
Description:
{Criteria} is the member property name to test. *IS is followed the values to be testes against.
It has to be comma delimited if multiple values are to be checked against. The operators
allowed are = and <>. If no operator is specified, then = is assumed.
Example:
*WHEN SR_ACCOUNT
*IS QTY
*REC(EXPRESSION=%VALUE%, SR_CATEGORY=PLAN, SR_TIME=2007.JAN)
*REC(EXPRESSION=%VALUE%, SR_CATEGORY=PLAN, SR_TIME=2007.FEB)
*REC(EXPRESSION=%VALUE%, SR_CATEGORY=PLAN, SR_TIME=2007.MAR)
*ENDWHEN
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 48
Business Scenario:
Copy Quantity account’s ACTUAL data for JAN, 2006 to JAN,FEB & MAR, 2007 PLAN data for
the product - LAPTOP.
17.1 Create a new logic file – LOGIC_WHEN.LGF in the Script Logic folder. Point Default.LGF to
the new logic file. Validate and Save both logic files. The new logic file is as follows:
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 49
6.1 Enter Quantity(as 1000) for Jan, 2006 as follows and click Send and Refresh Schedules. This
will update the database.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 50
6.2 Now, change the Current View as follows. This will refresh the screen with the latest data from
the database.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 51
6.3 The following screen shows the data copied to JAN, FEB & MAR 2007.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 52
7. *REC
Syntax :
*REC
(
{Expression/Factor to change the signed data},
{Comma delimited additional member values to insert/update in the target member}
)
Description:
*REC() generated a new record to post to the database. Multiple *REC() statements can be
used to insert multiple new records in to the target/dimension. *REC() can also be used to
update the same record in the dimension and this is achieved through delta record/update.
Example:
*WHEN SR_ACCOUNT
*IS "QTY"
*REC(EXPRESSION=%VALUE%*1.1,SR_CATEGORY=PLAN,SR_TIME=2006.JAN)
*REC(EXPRESSION=%VALUE%*1.1,SR_CATEGORY=PLAN,SR_TIME=2006.FEB)
*REC(EXPRESSION=%VALUE%*1.1,SR_CATEGORY=PLAN,SR_TIME=2006.MAR)
*ENDWHEN
Business Scenario:
Increase quantity data by 10% for JAN, 2005 for the product – LAPTOP, for the ACTUAL
category and copy it to JAN, FEB & MAR 2006’s PLAN data.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 53
7.1 Create a logic file – LOGIC_REC.LGF under the folder :
\{AppSet}\Application\SR_PLANNING\Script Logic\, as follows:
Validate and Save LOGIC_REC.LGF. And, point Default.LGF to LOGIC_REC.LGF. Validate and
Save it.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 54
7.2 In the following screen, enter Quantity as 1000 for JAN. 2005 as below:
Click Send and Refresh Schedules Button.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 55
7.3 The following screen shows the Quantity(increased by 10%) data for JAN, FEB, MAR,
2006(PLAN), which have been copied from JAN, 2005 for the same product.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 56
8. TMVL
Syntax :
TMVL(offset, base_period)
Description:
This command returns time value after offsetting the value from the base period which is
passed as parameter to this command. This command works with only base members. Nested
commands are not supported.
Example:
TMVL(1, 2006.FEB) //will return Mar, 2006
Business Scenario:
Increase the ACTUAL quantity by 10% for Jan, 2005 and book it to PLAN data for JAN, 2006.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 57
8.1
� Create a new logic file – LOGIC_TMVL.LGF under
<AppSet>\Application\SR_PLANNING\Script Logic\
� Save and Validate LOGIC_TMVL.LGF
� Remove all the INCLUDEs from Default.LGF
� Include LOGIC_TMVL.LGF in Default.LGF
� Save and Validate Default.LGF
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 58
8.2
Make sure the CV is as follows to get the following screen which contains Jan, 2006
PLAN data. The data is empty now.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 59
8.3 Now, change the CV as follows to get the following screen to enter data for Jan, 2005
and ACTUAL. Key in data for “Quantity” and click Send and Refresh Schedules.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 60
8.4 Again, change the CV as follows to see the Jan, 2006 Planned data. Here, the
Quantity has been increased by 10%.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 61
9. *SELECT
Syntax :
*SELECT ({variable}, {[What]}, {from dimension}, {Where})
Variable - Holds the selected (retrieved) data
What - Property which need to be retrieved
From Dimension - From which Dimension the data need to retrieved
Where - The selection criteria
Description:
The special instruction *SELECT allows the user to retrieve a list of elements from a dimension
and save it in a user-defined variable for later use anywhere else in the logic.
The SELECT instruction is not specific to a given logic section, but it can be written once
anywhere in the logic and used across multiple commit sections.
The SELECT statement is fairly limited, as it only supports the equal sign (=), not equal to (<>)
and cannot be used to combine multiple filter criteria with AND or OR keywords.
The dataset retrieved using *SELECT can be used in XDIM_MEMBERSET to define scope.
The memory variables are defined at compile time, not at run-time, so the logic file needs to
be revalidated when new members are added to the dimensions.
Example:
*SELECT(%PRODSET%,"ID",SR_PRODUCT,"AGENT_COMMISSION='A'")
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 62
9.1 Select all the entities which are having “AGENT_COMMISSION” property as “A” and
save the retrieved dataset in %PRODSET% variable which can later be used in the script.
Business Scenario:
Calculate the Agent Commission which is 3% of Revenue for all the products which are having
“A” in their “AGENT_COMMISION” property for Jan, 2006 when Revenue data is entered/
calculated.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 63
9.2
• Create a new logic file – LOGIC_SELECT.LGF under
<AppSet>\Application\SR_PLANNING\Script Logic\
• Save and Validate LOGIC_SELECT.LGF
• Remove all the INCLUDEs from Default.LGF
• Include LOGIC_SELECT.LGF in Default.LGF
• Save and Validate Default.LGF
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 64
9.3 Make sure the CV is as follows to get the following screen which contains 2006 Q1 (Jan,
Feb and Mar) PLAN data for the product “LAPTOP”. The data is empty for “AGT_COMM”.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 65
9.4 Now enter data in “REVENUE” for 2006 Q1 (Jan, Feb and Mar), PLAN and for the
product “LAPTOP”. And, click Send and Refresh Schedules.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 66
9.5 Verify 2006 Q1 Planned data for the product “LAPTOP”. Here, the “AGT_COMM” have
been calculated as 3% of “REVENUE” as the “AGENT_COMMISION” property value for the
product “LAPTOP” is “A”
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 67
9.6 Now change the “LAPTOP” to “DESKTOP” for the Product in CV and enter data in
“REVENUE” for 2006 Q1 (Jan, Feb and Mar), PLAN. And, click Send and Refresh Schedules.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 68
9.7 Verify 2006 Q1 Planned data for the product “DESKTOP”. Here, the “AGT_COMM” has
not been calculated as the “AGENT_COMMISION” property value for the product
“DESKTOP” is “B”
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 69
10. *SELECTCASE / *ENDSELECT
Syntax :
*SELECTCASE {expression}
*CASE {value1}[,{value2},…]
{Formulae}
[*CASE {value1}[,{value2},…]
{Formulae}
[*CASEELSE]
{Formulae}
*ENDSELECT
where
{Expression} is the condition to be evaluated
{value1},.. is the range of comma-delimited results that satisfy the condition for the current
case
Description:
*SELECTCASE is an alternate to IIF MDX statements and expands into IIF when executed. IIF
and SELECTCASE have same impact on the performance.
Example:
*SELECTCASE [SR_PRODUCT].CURRENTMEMBER.PROPERTIES("AGENT_COMMISSION")
*CASE "A"
[#AGT_COMM]=[REVENUE]*0.03
*CASE "B"
[#AGT_COMM]=[REVENUE]*0.02
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 70
*CASEELSE
[#AGT_COMM]=[REVENUE]*0.01
*ENDSELECT
Agent Commission for the each product is calculated based on the Product DIMs
AGENT_COMMISSION property.
Business Scenario:
Calculate the Agent Commission for all the products based on the “AGENT_COMMISION”
property (“A” – 3% 0f Revenue, “B” – 2% of Revenue, <empty> - 1% of Revenue) for 2006 Q1
when Revenue data is entered/ calculated.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 71
10.1
• Create a new logic file – LOGIC_SELECTCASE.LGF under
<AppSet>\Application\SR_PLANNING\Script Logic\
• Save and Validate LOGIC_SELECTCASE.LGF
• Remove all the INCLUDEs from Default.LGF
• Include LOGIC_SELECTCASE.LGF in Default.LGF
• Save and Validate Default.LGF
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 72
10.2 Make sure the CV is as follows to get the following screen which contains 2006 Q1
(Jan, Feb and Mar) PLAN data for the product “LAPTOP”. The data is empty for
“AGT_COMM”.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 73
10.3 Now enter data in “REVENUE” for 2006 Q1 (Jan, Feb and Mar), PLAN and for the
product “LAPTOP”. And, click Send and Refresh Schedules.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 74
10.4 Verify 2006 Q1 Planned data for the product “LAPTOP”. Here, the “AGT_COMM” have
been calculated as 3% of “REVENUE” as the “AGENT_COMMISION” property value for the
product “LAPTOP” is “A”
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 75
10.5 Now change the “LAPTOP” to “DESKTOP” for the Product in CV and enter data in
“REVENUE” for 2006 Q1 (Jan, Feb and Mar), PLAN. And, click Send and Refresh Schedules.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 76
10.6 Verify 2006 Q1 Planned data for the product “DESKTOP”. Here, the “AGT_COMM” has
been calculated as 2% of the Revenue as the “AGENT_COMMISION” property for
“DESKTOP” is “B”.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 77
11. *FOR / *NEXT
Syntax :
*FOR {variable1} = {set1} [ AND {variable2={set2}]
{text}
{text}
…
*NEXT
Description:
*FOR / *NEXT is used to execute the scripts written between *FOR and *NEXT repeatedly.
Variables will be used in FOR loop to identify the records.
Example:
*WHEN SR_ACCOUNT
*IS "QTY"
*FOR%CURMONTH%=2005.JAN,2005.FEB,2005.MAR
*REC(EXPRESSION=%VALUE%*1.1,SR_CATEGORY=PLAN,SR_TIME=TMVL(12,%CURMONTH%))
*NEXT
*ENDWHEN
Here, the *REC function will get executed for each month (2005.JAN,2005.FEB, 2005.MAR) and
the %CURMONTH% variable is used to hold the time value.
Business Scenario:
Increase the ACTUAL quantity by 10% for 2005 Q1 and book it to PLAN data for 2006 in same
months.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 78
11.1
9 Create a new logic file – LOGIC_FORNEXT.LGF under
<Appset>\Application\SR_PLANNING\Script Logic\
10 Save and Validate LOGIC_FORNEXT.LGF
11 Remove all the INCLUDEs from Default.LGF
12 Include LOGIC_FORNEXT.LGF in Default.LGF
13 Save and Validate Default.LGF
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 79
11.2 Make sure the CV is as follows to get the following screen which contains 2006 Q1
(Jan, Feb and Mar) PLAN data. The data is empty now.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 80
11.3 Now, change the CV as follows to get the following screen to enter data for 2005 Q1
(Jan, Feb and Mar) and ACTUAL. Key in data for “Quantity” and click Send and Refresh
Schedules.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 81
11.4 Again, change the CV as follows to see 2006 Q1 Planned data. Here, the Quantities
have been increased by 10% for 3 months.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 82
12. *ADD / *ENDADD
Syntax :
*ADD {variable} = {set}
{Formula}
*ENDADD
Description:
*ADD / *ENDADD allows members values, delimited by comma, to be
accumulated/added and then to be stored in a calculated member.
Example:
*ADD %VARCOST% = [DISCOUNT], [SPL_DISCOUNT], [AGT_COMM]
[#VAR_COSTS]= %VARCOST%
*ENDADD
Business Scenario:
Calculate the variable costs[VAR_COSTS] by adding Discount, Special Discount & Agent
Commission, and then booking it to VAR_COSTS account for PLAN data for the period
– 2006, JAN.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 83
12.1 Create a new Script Logic under the folder –
MURUGESAN�Application�SR_PLANNING�Script Logic, in the name LOGIC_2. And,
key in the code as follows:
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 84
12.2 Modify Default.lgf file to point to LOGIC_2.LGF file. And, then click Validate and
Save link on the right.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 85
12.3 The following screen shows the data for before the calculation of variable costs:
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 86
12.4 Now, enter the variable costs as shown below and click the button – Send and
Refresh Schedules:
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 87
12.5 Now, the following screen is shown. Click Refresh button.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 88
12.6 Click Yes to the following screen.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 89
12.7 Click Close button in the following screen. And, then click the button at the top –
Refresh Workbook.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 90
12.8 The following screen shows variable costs as 70 which is a sum of Discount, Special
Discount and Agent Commission Accounts.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 91
13. *BEGIN / *END
Syntax :
*BEGIN
{Formula}….
{Continuation of same Formula}
{Continuation of same Formula}
*END
Description:
*BEGIN / *END is used to split long formulae into multiple lines to improve readability.
Example:
*BEGIN
[#VAR_COSTS] = [DISCOUNT] +
[SPL_DISCOUNT] +
[AGT_COMM]
*END
Business Scenario:
Calculate the variable costs[VAR_COSTS] by adding Discount, Special Discount & Agent
Commission, and then booking it to VAR_COSTS account for PLAN data for the period
– 2006, JAN. Ensure that the formula, adding the values, is spread across multiple line.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 92
13.1 Create a new LOGIC_3 file in the folder -
MURUGESAN\Application\SR_PLANNING\Script Logic\ and enter the code as
shown below. And, modify the Default.lgf to point to LOGIC_3.LGF.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 93
13.2 After entering the data, click the Button – Send and Refresh Schedules. In the
following confirmation prompt, click Refresh button and then Yes button. Then
click the Close button in the following button. Now, click Refresh Workbook and
the following screen shows the calculated data.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 94
14. *FUNCTION / *ENDFUNCTION
Syntax :
* FUNCTION Function_Name( param1, param2, etc…)
Function Text
* ENDFUNCTION
Description:
*FUNCTION / *ENDFUNCTION allows you to write user defined functions where in formulae
can be put in and can be called from the main logic. These functions could be in a separate
logic file or part of the mail logic file(in-line). This can improve the readability of the logic
statement. Unlike Subroutines, Functions return a value.
Example:
*FUNCTION GETREV(%QUANTITY%,%UNIT_PRICE%)
%QUANTITY%*%UNIT_PRICE%
*ENDFUNCTION
Business Scenario:
Multiply Quantity by Unit Price and boot it to REVENUE account for the year Jan, 2006 for the
product - LAPTOP.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 95
14.1 Create a new logic file –FUNCTIONS.LGF under the folder :
{AppSet}\Application\SR_PLANNING\Script Logic\. This should contain the
function(GETREV) which will be called from the mail logic file – LOGIC_FUNCTIONS.LGF.
Script the FUNCTIONS.LGF file as follows:
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 96
14.2 Create a new logic file –LOGIC_FUNCTIONS.LGF under the folder :
{AppSet}\Application\SR_PLANNING\Script Logic\. Script the LOGIC_FUNCTIONS.LGF file as
follows:
First line in the script includes the FUNCTIONS.LGF. And, the last line in the script calls the
GETREV() function that is stuffed in the FUNCTIONS.LGF. Now, point Default.LGF to
LOGIC_FUNCTIONS.LGF. Validate and Save the two .LGF files.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 97
14.3 Now, enter the quantity value as 100 and unit price as 1000 as shown below:
Click Send and Refresh Schedules now.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 98
14.4 The following screen shows the REVENUE calculated by the GETREV() function:
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 99
15. *SUB / *ENDSUB
Syntax :
*SUB {SubName}({Param1,[,{Param2}…])
{body text}
{body text}
{body text}
[…]
*ENDSUB
Description:
*SUB / *ENDSUB allows you to create sub routines which can be called from the main logic. It
is similar to *FUNCTION except that subroutines can not return values. And, *SUB / *ENDSUB
does not have to be in a separate a file – it can be part of the main logic. If a particular
segment of the code is to be repeated, then it can be coded as a subroutine and called from
main code.
Example:
*SUB SET_REV ( %QUANTITY%, %PRICE% )
[SR_ACCOUNT].[#REVENUE] = %QUANTITY% * %PRICE%
*ENDSUB
SET_REV( [SR_ACCOUNT].[QTY], [SR_ACCOUNT].[U_PRICE] )
Business Scenario:
Calculate REVENUE by multiplying QTY and U_PRICE and book it to REVENUE account for the
PLAN data for the year JAN, 2006 for the product - LAPTOP.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 100
15.1 Create a logic file LOGIC_SUB under the folder :
{AppSet}\Application\SR_PLANNING\Script Logic\ as follows:
Validate and Save LOGIC_SUB.LGF. Point Default.LGF to LOGIC_SUB.LGF. Validate and Save
Default.LGF.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 101
15. 2 Make sure the Current View is as follows. And, key in the data for Quantity and Unit Price
as follows too:
Now, click Send and Refresh Schedules button.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 102
15.3 The following screen shows the calculated REVENUE, which is performed by the sub
routine.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 103
16. LOOKUP
Syntax :
*LOOKUP {App}
*DIM [{LookupID}:]{DimensionName}="Value" | {CallingDimensionName}[.{Property}]
*DIM MEASURES=”MeasureName”
*ENDLOOKUP
Description:
When a value, which is not inside the current data region, is required for calculation, LOOKUP
can be used. LOOKUP can be used to retrieve value from current application or another
application. Only one LOOKUP is allowed per COMMIT block.
Example:
*LOOKUP RATE
*DIM TIME=SR_TIME.ID
*DIM CATEGORY="ACTUAL"
*DIM R_ACCT="AVG"
*DIM R_ENTITY="GLOBAL"
*DIM SRCCURR:INPUTCURRENCY=SR_ENTITY.CURRENCY
*DIM RATEEUR:INPUTCURRENCY="EUR"
*DIM RATEUSD:INPUTCURRENCY="USD"
*DIM MEASURES="PERIODIC"
*ENDLOOKUP
Business Scenario:
Convert NETREVENUE from SR_ENTITY’s local currency to the reporting currencies(USD &
EUR).
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 104
16.1 Create a new logic file – LOGIC_LOOKUP.LGF. Point Default.LGF to LOGIC_LOOKUP.LGF.
The following screen shows the code for LOGIC_LOOKUP.LGF:
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 105
16.2 Open the Nested Rows Dynamic Report Template as per the current view and member
set parameters shown below to view the data available before running the
LOGIC_LOOKUP.LGF:
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 106
16.3 Following screen shows no NETREVENUE data for all the currencies for first quarter of
2006.
There is no data available for any currencies for Account - NETREVENUE, Product – LAPTOP and
Entity – India.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 107
16.4 Now, use the Trend by Account Dynamic Input schedule, enter the NETREVNUE data for
local currency (Indian Rupees) for first quarter for 2006.
Now, click Send and Refresh Schedules button. This will save the data in local currency (INR)
and the LOGIC_LOOKUP will insert two more records (one for USD currency and another one
for EUR currency) by coverting the NETREVENUE for the Indian Rupees using the exchange
rates from RATE application.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 108
16.5 The following screen shows the exchange rates for local(INR) and reporting
currencies(USD,EUR):
Note that this is a new EVDRE() report for RATE application.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 109
16.6 Open a Nested Row dynamic report template with current view as shown below.
The above screen shows the data records for the respective reporting currencies – USD &
EUR, apart from local currency(LC).
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 110
17. RUN ALLOCATION
Syntax :
*RUNALLOCATION
*FACTOR=<driver>
*DIM P_ACCT WHAT=<source>; WHERE=<target>; USING=<distribution key>;
[TOTAL=<distribution key>]
*DIM <other dimensions>
*ENDALLOCATION
Description:
Allocation engine helps to distribute the data from a source region to a target region using the
specified driver. Allocation is often used in Planning as a top-down scenario.
The following are the elements which define the allocation:
WHAT: Source (Base members which holds the data(amount) to be allocated)
WHERE: Target (Destination Base members where the allocated data(amount) will be written)
USING: (Optional) Member storing an Allocation Factor/ the "Amount" of the Driver
TOTAL: (Optional) Sum of the driver or the Using Amounts
FACTOR: (Optional) How to calculate the Distribution Key using "USING" and "TOTAL"
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 111
Example:
*RUNALLOCATION
*FACTOR=USING/TOTAL
*DIM SR_ENTITY WHAT=ALLOC_ENTITY; WHERE=BAS(HQ); USING= <<<; TOTAL= <<<;
*DIM SR_ACCOUNT WHAT=REV_TARGET; WHERE= <<<; USING= NETREVENUE; TOTAL= <<<;
*DIM SR_CATEGORY WHAT=PLAN; WHERE= <<<; USING= ACTUAL; TOTAL= <<<;
*DIM SR_RPTCURRENCY WHAT=USD; WHERE= <<<; USING= <<<; TOTAL= <<<;
*DIM SR_TIME WHAT=2006.JAN; WHERE= 2006.JAN; USING= 2005.JAN; TOTAL= <<<;
*ENDALLOCATION
The above can be written as follows:
*RUNALLOCATION
*FACTOR=USING/TOTAL
*DIM SR_ENTITY WHAT=ALLOC_ENTITY; WHERE=BAS(HQ); USING= BAS(HQ); TOTAL= BAS(HQ);
*DIM SR_ACCOUNT WHAT=REV_TARGET; WHERE= REV_TARGET; USING= NETREVENUE; TOTAL= NETREVENUE;
*DIM SR_CATEGORY WHAT=PLAN; WHERE= PLAN; USING= ACTUAL; TOTAL= ACTUAL;
*DIM SR_RPTCURRENCY WHAT=USD; WHERE= USD; USING= USD; TOTAL= USD;
*DIM SR_TIME WHAT=2006.JAN; WHERE= 2006.JAN; USING= 2005.JAN; TOTAL= 2005.JAN;
*ENDALLOCATION
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 112
Business Scenario:
Allocate the amount USD : 30 million in revenue target account, to all the entities which are
coming under the head quarter for the year/month – JAN, 2006, using the ACTUAL net revenue
generated by those entities in JAN, 2005.
13.1 The following screen shows the net revenue generated by the concerned entities for the
year/month – JAN, 2005:
The amount shown in the above screen will be used by the allocation engine to calculate the
amount to be allocated to those entities for JAN, 2006.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 113
17.1 Enter the allocation amount USD : 30 million, in the ALLOC_ENTITY(which is the entity to
hold the amount to be allocated) as in the following screen:
Now, click Send and Refresh Schedules button. This will do the allocation. The following
screen will show the allocated amount to the respective entities.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 114
17.2 The following screen shows how the 30 million USD is distributed to the revenue targets
to those entities.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 115
18. *COMMIT
Syntax :
*COMMIT
Description:
Logic engine performs the processing in memory. And, *COMMIT is used to post the
processed data to the database. In the logic file, there could be multiple *COMMIT
statements. This is needed when the logic file contains multiple sections of code
wherein, one section of the code needs the output of another section. Under these
circumstances, the section containing the output has to be committed so that the other
section can use the output value in its processing.
After committing the records, data generated by XDIM_MEMBERSET will be destroyed
and will have to be rebuilt(scoping again) by executing XDIM_MEMBERSET again.
Example:
*WHEN SR_ACCOUNT
*IS "DISCOUNT"
*REC(FACTOR=0.1, SR_ACCOUNT=SPL_DISCOUNT)
*ENDWHEN
*COMMIT
Business Scenario:
Calculate and book the special discount which is 10% of Discount for the plan data for the
entity – USA, for the year Jan, 2006.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 116
Create a new logic file – LOGIC_COMMIT.LGF, under the folder :
{AppSet}\Application\SR_PLANNING\Script Logic\, as mentioned below:
Modify Default.LGF to point to LOGIC_COMMIT.LGF. Validate and Save the Default.LGF file and
LOGIC_COMMIT.LGF.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 117
In the following screen(Excel interface), enter Discount as 100.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 118
And, now click Send and Refresh Schedules button at the top. Data is updated in the database.
Now, click Refresh Workbook.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 119
The following screen shows the calculated special discount.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 120
Debugging Script Logic :
Script Logic can be debugged using the TCODE – UJKT.
Launch SAP GUI and go to Data Warehouse – Modeling Workbench(RSA1). Then, on the screen,
key in /NUJKT as shown below:
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 121
Following screen is shown:
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 122
To debug the script, specify the settings, at the top, as shown below:
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 123
Copy the script to be debugged from the BPC admin client(from Script Logic folder) and paste it
into the text area at the bottom left side as shown below:
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 124
An error has been introduced in the script intentionally. The script contains WHEN1 instead of
WHEN.
After pasting the script in the text area, click VALIDATE button. This will throw an error message in
the text area at the bottom right side of the screen. The following screen shows that.
Scripts can be debugged this way. Note that, there are two more buttons – EXECUTE and
EXCUTE(simulate). EXECUTE will actually execute the script and update the database accordingly.
But, EXCUTE(simulate) will compile and execute the script WITHOUT updating the database.
Instead, it will show the records to be selected/inserted in the text area – bottom right side.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 125
Benefits of Script Logic :
• Script Logic allows for Real-time calculations.
• Script Logic can re-run from Data Manager.
• Different formulas to different applications within the AppSet can be applied through
Script Logic.
• It is powerful and effective tool to perform calculations, delivering the desired results
efficiently and accurately.
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 126
Golden Rules of Script Logic:
� Load only the required data in memory
� Logic structure has to be as short and compact as possible
� Use less number of COMMITs, under/after a logical unit of work
� Use default Logic only when it is absolutely necessary i.e. when calculations are to
be performed in real-time
� Try not to use MDX logic as there is a performance penalty associated with it
� Avoid refresh-after-send in Excel
� Effective script logic design should be in place in order to achieve the desired
performance and avoid potential system response issues
� Effective script logic includes
� What business functions/process should be written in script logic VS BADI/ABAP
� Alignment between data region to user profile
� Using dynamic SELECT VS hard coding values
� Using global VS local variables
� Using Modular approach though SUB’s and Functions
� Much more …
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 127
Calling Script Logic – Various Options:
Script Logic can be called/executed in many different ways, the following screens shows the users
options to call a script logic.
Option – 1:
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 128
Option – 2:
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 129
Option – 3:
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 130
Option – 4:
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 131
Option – 5:
________________________________________________________________________
A SAP EPM/BPC Community Service
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead 03/20/2012 SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected], (916)-296-0228 - Cell
CloneSkills, Inc., http://www.CloneSkills.com , [email protected] , 1.800.836.8959, Page - 132
Disclaimer:
This description is a preliminary version and not subject to a license agreement or any other
agreement with SAP®. This document contains only intended strategies, developments, and
functionalities of the SAP product and is not intended to be binding upon SAP to any particular
course of business, product strategy, and/or development. Please note that this preview is subject
to change and may be changed by SAP at any time without notice.
SAP/We assume no responsibility for errors or omissions in this document. SAP/We does not
warrant the accuracy or completeness of the information, text, graphics, links, or other items
contained within this material. This preview is provided without a warranty of any kind, either
express or implied, including but not limited to the implied warranties of merchantability, fitness
for a particular purpose, or non-infringement.
SAP/We shall have no liability for damages of any kind including without limitation direct, special,
indirect, or consequential damages that may result from the use of these materials. This limitation
shall not apply in cases of intent or gross negligence. The statutory liability for personal injury and
defective products is not affected.
____________________________________________________________
SAP Community Contributors:
Author: Chief Architect:
Murugesan Annamalai Jothi Periasamy
SAP Project Manager/Lead SAP HANA/EPM/BI/EIM Community Leader
SAP EPM/BPC Solutions Lead SAP BPC/BOBJ/BI/MDM Community Domain Champion
[email protected] [email protected] , (916)-296-0228 – Cell
We always appreciate your help and support in growing SAP HANA/EPM/BI/EIM community. Don’t
hesitate to contact us for any of your needs, including
� Script Logic Optimization
� Script Logic Best Practices
� Complex Script Logic Implementation
� Script Logic Design Audit/Recommendations
� etc