1504814399
ISO9001
IATF16949
ISO14001
OHSAS18001
S DS DS DS D
DEEPAKFASTENERS LIMITED
8.8 Standard Products INR Price List No. DFL-09
Effective 1st July 2021
Disclaimer
Limited Warranty And Exclusive Remedy
All information contained in this pricelist has been prepared to assist users in their requirements for Fasteners. The information is based on International Fastener Standards. All such source material and information beyond the control of Deepak Fastener Limited (DFL) is subject to change.
Whilst every care has been taken to ensure that all information and technical data is accurate, DFL will not be liable to any customer that relies on any matter, fact or representation nor will it be liable for any subsequent damage or loss resulting from the use of any information contained in this pricelist. Customers are advised to make their own enquiries or seek independent advice regarding the fitness and suitability of the products listed.
Deepak Fasteners Limited has the right to change the price without any information, if there is a big change in the price of steel or zinc. No guarantee can be given for DFL (hex bolt & nut) products which are plated by users and/or outside plates, who may not have considered hydrogen embrittlement problem. The products listed in this pricelistmight not be stocked at DFL at all times and customers are advised to enquire the availability of the same. E. & O. E.
Deepak Fasteners Limited (DFL) warrants that these products conform to industry standards specified herein and will be free from defects in materials and workmanship. This warranty is expressly given in lieu of any and all other express or implied warranties, including any implied warranty of merchantability or fitness for a particular purpose, and in lieu of any other obligation on our part of DFL will at its option, repair or replace free of charge (excluding all shipping and handling costs) any products which have not been subject to misuse, abuse, or modification and which in its sole determination were not manufactured in compliance with the warranty given above.
The remedy provided herein shall be the exclusive remedy for any breach of warranty or any claim arising in any way out of the manufacture, sale or use of these products. In no event shall Deepak Fasteners be liable for consequential, incidental or any other damages of any nature whatsoever except those specifically provided herein for any breach of warranty or any claim arising in any way of the manufacture, sale or use of these products. No other person is authorised by Deepak Fasteners to give any other warranty, written or oral, pertaining to the products.
Note
Surface Finish : All the products, unless otherwise ordered, are supplied in black thermal finish with a coat of rust preventive oil.
Packing : All products are supplied in standard packing as described in respective price tables. For sizes M6 (1/4) and above 3% extra packing charges will be applicable if the order quantity is less than one carton.
Plating No guarantee can be given for DFL products which are plated by users or by outside plates, : who may not have considered hydrogen embrittlement problem.
Pricing : GST extra as applicable.
2
DEEPAKFASTENERS LIMITED
Toll Free: 1800 102 3911
The company accepts no responsibility for orders booked by the company's salesman or representatives, till it is confirmed in writing by the company.
All offers for delivery from stocks are subject to goods remaining unsold at the time of receipt of order. For forward delivery, dates are given without any guarantee and no responsibility can be accepted by the company for delay in delivery or failure to deliver due to circumstances beyond the company's control.
When products are forged to customer's drawings and / or specifications , the responsibility to ensure that these do not result in infringement of any patent or trademark will lie entirely with customer concerned and the customer will be solely responsible for the consequence in case of any such infringement.
Wrong dispatches should be notified to the company within 15days from the date of receipt of goods and the Company's consent should be obtained in writing before return of such goods.
The company shall not be responsible for failure or delay in delivering the goods or any part thereof (or any consequential damages) due to acts of God, enemies of the Government of India, wars, revolution, embargo, riots, civil or political disturbances, strikes, lock-outs, stoppages of labour.
Delivery:
Infringement of patent and trade mark:
Order confirmation:
Acceptance and return:
Force Majeure:
Certifications:
3Toll Free: 1800 102 3911
NABL ISO/IEC 17025:2017ISO 9001:2015EN 15048-1:2007EN 14399-1:2015
MetricHex Head Bolts / Screws
4
1. Specifications Generally conforming to IS1364, ISO4014, 4017.ISO Metric 6g as per IS per IS4218.2. Threads
Property Class 8.8 as per IS1367.3. Material Mechanical Properties Prices for fully threaded screws beyond shaded sizes will cost 10% extra.4. Note
DFL 8.85. Marking No guarantee can given for DFL products which are plated by users or by outside plates, 6. Plating
who may not have considered hydrogen embrittlement problem.10% will be Charged Extra For Zinc Cr3+Plating
GST extra as applicable.7. Pricing
Part No. ` Price/100 Pcs
CartonQty
M4
616724616725616727616728616729624809613042613044613045613046794433794434794435794436
214214251251274298298334356400448492537582
40004000400040004000400030004000400030001200120016001600
616745616746616748616749616750624810613047613049613050613051613052613053794437794438794439794440794441
224224263263286311311350397464515563635687766820875
616767616768616770616771616772616773616774613054613055613056613057613058613059613060624811624812624813624814794442794443794444794445794446794447794448
16001600200016001600120012001200
8001200
800800800800600600600600500400400300300300200200200200200
M5 M6 M8
40004000400040004000400040003000300030002000160016001600160016001600
180195225240255271291354402451496540589632686738791844
1,0041,1141,6321,7661,9012,0412,169
400040004000300030003000300030001600160016001600160012001200120012001200
800800800600600400400
616815616817616818616819616820616821616823613070613071613072613073613074613075613076613077613078613079624815624816561206794449794450794451794452794453794454794455794456794457
371420441464487524586687766839915975
1,0521,1261,2021,2731,3481,5161,7302,4402,8713,0833,4413,6963,9294,1634,3964,6294,862
Length
Dia
10121618202225303540455055606570758090
100110120130140150160170180190200
Part No. ` Price/100 Pcs
CartonQty Part No. ` Price/
100 Pcs Carton
Qty Part No. ` Price/100 Pcs
CartonQty
DEEPAKFASTENERS LIMITED
Toll Free: 1800 102 3911
- All material is bulk packed - Minimum order quantity is one carton for each size.
Grey highlighted items are full threaded
DEEPAKFASTENERS LIMITED
Toll Free: 1800 102 3911
MetricHex Head Bolts / Screws
5
1. Specifications Generally conforming to IS1364, ISO4014, 4017.ISO Metric 6g as per IS per IS4218.2. Threads
Property Class 8.8 as per IS1367.3. Material Mechanical Properties Sizes in brackets are non-preferred standard.4. Note
Prices for fully threaded screws beyond shaded sizes will cost 10% extra.DFL 8.85. Marking
No guarantee can given for DFL products which are plated by users or by outside plates, 6. Plating who may not have considered hydrogen embrittlement problem.10% will be Charged Extra For Zinc Cr3+Plating
GST extra as applicable.7. Pricing
M10
616844616845616846616847616848616850616851613080613081613082613083613084613085613086613087613088613089613090613091613092624817624818624819624820624821794458
794459
794460
M12 (M14) M16
754795802839895992
1,0841,3221,4361,5541,6541,7731,8902,0072,1242,2402,4742,4742,7082,7084,0884,2614,5814,9045,2286,095
6,788
7,483
1200800800800800800600600600400400400400400400400300300300300200200200200200200
120
120
616874
616876
616878616880616881616882613093613094613095613096613097613098613099613100613101613102613103613104613105613106624823624824624825624826624827624828624829624830624831624832624833624834794424
1,219
1,219
1,3421,4251,5611,6972,0262,1952,3652,5332,6562,8232,9893,1593,4903,4903,8163,8164,1194,7165,0755,4795,8406,2307,0097,0098,1508,1508,9669,780
10,98711,83212,615
600
600
600600400400400400300300300300300200200200200150150150150150150100100100100100
7560606060
616907616909616910616911616912613107613108613109613110613111613112613113613114613115613116613117613118613119613120613121624835624836624837624838
791593791595791597791599791601791603
2,0022,1872,3752,5662,7553,0993,3283,5553,7333,9674,1934,4214,7994,7995,2525,2525,9426,4536,8467,2787,7128,2269,6959,695
12,04013,12014,23615,35316,46917,586
400300200200200200200200200200150150150150150150150120120100100100100100
806050505050
616935616937616938616939616940616941613122613123613124613125613126613127613128613129613130613131613132613133613134613135613136613137624840624841624842624843624844624845624846624847624848
2,9982,9063,1563,4083,6703,8914,3454,6474,9505,2525,5555,8576,4616,4617,0267,0267,6328,2379,0509,681
10,30911,02512,29312,29314,15214,15215,47816,80218,12619,45220,775
200200200200200200200150150150150150150100100120
909060806060606060404040404040
Dia
Part No. ` Price/100 Pcs
CartonQtyLength Part No. ` Price/
100 Pcs Carton
Qty Part No. ` Price/100 Pcs
CartonQty Part No. ` Price/
100 Pcs Carton
Qty
- All material is bulk packed - Minimum order quantity is one carton for each size.
Grey highlighted items are full threaded
16 1820 2225 30 35 40 4550556065707580859095100110120130140150160170180190200220240260280300
DEEPAKFASTENERS LIMITED
Toll Free: 1800 102 3911
1. Specifications Generally conforming to IS1364, ISO4014, 4017.ISO Metric 6g as per IS per IS4218.2. Threads
Property Class 8.8 as per IS1367.3. Material Mechanical Properties Sizes in brackets are non-preferred standard.4. Note
Prices for fully threaded screws beyond shaded sizes will cost 10% extra.DFL 8.85. Marking
No guarantee can given for DFL products which are plated by users or by outside plates, 6. Plating who may not have considered hydrogen embrittlement problem.10% will be Charged Extra For Zinc Cr3+Plating
GST extra as applicable.7. Pricing
(M18) M20 (M22)
616965616966616967616968624849613138613139613140613141613142613143613144613145613146613147613148613149613150613151613152613153624850624851794425794426
794427794428794429
4,5344,8365,1385,4796,1586,4616,8397,2167,5588,3128,3129,0709,0709,824
10,58011,64712,43513,22013,89716,38716,38718,12618,12619,69821,353
23,00824,66426,319
150150150150120100120
80120
80808080806060404060604040403030
303030
616995616996616997616998616999617000613154613155613156613157613158613159613160613161613162613163613164613165613166613167613168613169613170613171624854624855624856624857624858624859
5,8575,8576,2356,6507,0267,4068,2758,7279,1819,635
10,54410,54411,44811,44812,35713,26214,74715,66016,47317,33920,44220,44222,51422,51424,58126,65128,72128,72130,79032,858
150150100100100100
808080808080808060606040404040404040303030303030
617029617030617031617032613172613173613174613175613176613177613178613179613180613181613182613183613184613185613186613187613188613189624860
624861624862791643
8,2758,7669,2209,712
10,61711,18411,75112,88312,88313,98013,98015,36516,51617,28318,43719,82920,99623,32723,32726,17626,17630,62233,407
36,19338,97640,996
8080808060808080606060606060404040404020202020
202020
Dia
MetricHex Head Bolts / Screws
6
Part No. ` Price/100 Pcs
CartonQtyLength Part No. ` Price/
100 Pcs Carton
Qty Part No. ` Price/100 Pcs
CartonQty
- All material is bulk packed- Minimum order quantity is one carton for each size.
Grey highlighted items are full threaded
3540 45 50 55 6065707580859095100110120130140150160170180190200220240250260280300
DEEPAKFASTENERS LIMITED
Toll Free: 1800 102 3911
1. Specifications Generally conforming to IS1364, ISO4014, 4017.ISO Metric 6g as per IS per IS4218.2. Threads
Property Class 8.8 as per IS1367.3. Material Mechanical Properties Sizes in brackets are non-preferred standard. 4. Note
Prices for fully threaded screws beyond shaded sizes will cost 10% extra.* Long Delivery Items - Subject to extended deliveries (3 to 4 months) Users are advised to plan their requirements in advance.
DFL 8.85. Marking No guarantee can given for DFL products which are plated by users or by outside plates, 6. Plating
who may not have considered hydrogen embrittlement problem.10% will be Charged Extra For Zinc Cr3+Plating
GST extra as applicable.7. Pricing
MetricHex Head Bolts / Screws
7
50 55 60 65 70 75 80859095100110120130140150160170180190200220240250260280300
M24 (M27)* M30*
617060617061617062617063617064617065613190613191613192613193613194613195613196613197613198613199613200613201613202613203613204613205613206624868624869624870624871
11,04811,65412,25912,86413,46913,80015,54616,97416,97418,40218,40219,83021,21822,20923,59724,98626,37429,14929,14933,31333,31337,00339,76842,53242,53245,29748,061
608060606060606040404040403232282824202020202020161616
617088617089617090617091617092617093617094
617096
613209613210613211613212613213613214613215613216613217613218613219613220613221
613222624873624874
16,66617,56918,38919,22920,07020,91021,750
23,475
26,65728,73630,72431,82933,81835,80738,24041,77741,77745,53345,53349,95453,933
57,91162,33266,753
40404040404040
40
30303020202020202020201212
121212
617112617113617114617115617116617117617118
617120
613225613226613227613228613229613230613231613232613233613234613235613236613237
613238613239613240
21,92622,94324,00525,02126,08127,14328,159
30,282
33,90736,38338,90240,67043,10145,53347,96650,52353,04955,15357,91162,77567,636
72,50177,36482,225
40404030303030
30
30202020202016161616161010
1010
8
Dia
Part No. ` Price/100 Pcs
CartonQtyLength Part No. ` Price/
100 Pcs Carton
Qty Part No. ` Price/100 Pcs
CartonQty
- All material is bulk packed - Minimum order quantity is one carton for each size.
Grey highlighted items are full threaded
DEEPAKFASTENERS LIMITED
Toll Free: 1800 102 3911
1. Specifications Generally conforming to IS1364, ISO4014, 4017.ISO Metric 6g as per IS per IS4218.2. Threads
Property Class 8.8 as per IS1367.3. Material Mechanical Properties Sizes in brackets are non-preferred standard. 4. Note
Prices for fully threaded screws beyond shaded sizes will cost 10% extra.* Long Delivery Items - Subject to extended deliveries (3 to 4 months) Users are advised to plan their requirements in advance.
DFL 8.85. Marking No guarantee can given for DFL products which are plated by users or by outside plates, 6. Plating
who may not have considered hydrogen embrittlement problem.10% will be Charged Extra For Zinc Cr3+Plating
GST extra as applicable.7. Pricing
75 80 90 100110120130140150160170180190200220240260280300
(M33)* M36* M42*
617141617142617144617146613242613243613244613245613246613247613248613249613250613251613252613253613254613255613256
3020202020201616161616121212
88888
617166617168617170613257613258613259613260613261613262613263613264613265613266613267613268613269613270613271
2018161612121212121212
8888888
617215617217617218617219613286613287613288613289613290613291613292613293613294613295613296613297613298
121212
88888888876444
Dia
MetricHex Head Bolts / Screws
8
Part No. ` Price/100 Pcs
CartonQtyLength Part No. ` Price/
100 Pcs Carton
Qty Part No. ` Price/100 Pcs
CartonQty
- All material is bulk packed - Minimum order quantity is one carton for each size.
M48
617263617264617265617266613312613313613314
613316
613318613319613320613321613322613323
123,639130,433131,200136,666152,668159,577166,534
180,398
186,954237,639253,474269,309285,144300,979
4444444
4
444444
Part No. ` Price/100 Pcs
CartonQty
34,26135,63138,28440,67045,09148,18650,83853,93357,02759,68065,42865,42871,17571,17577,36483,10989,29895,045
101,232
43,76446,86050,39654,81758,35461,44864,98368,52072,05779,13079,13086,20486,20493,277
100,349107,423114,495121,568
84,07488,90593,76394,48598,475
103,955109,424114,899121,464125,336132,552131,006168,042180,514193,025205,511217,989
Grey highlighted items are full threaded
1. Specifications Generally conforming to IS1364, ISO4032.ISO Metric 6H as per IS4218, ISO261, ISO965.2. Threads
Property Class 8 as per IS1367, ISO898 Part-II.3. Material and Mechanical Properties Sizes in brackets are non-preferred non-standard sizes.4. Note
M6 to M42 Marking will be DFL 8.5. Marking No guarantee can given for DFL products which are plated by users or by outside plates, 6. Plating
who may not have considered hydrogen embrittlement problem.10% will be Charged Extra For Zinc Cr3+Plating
GST extra as applicable.7. Pricing
623196623197623198623200787925623201623202787926624890623203787927623204624891623205624892623206623207623208623209623210623211623212623214623216
80008000600040001600160012001200
600600600600400400300300200200100
8060402020
M4 x 0.70M5 x 0.80
M6 x 1M8 x 1.25
(M10) x 1.25M10 x 1.5
M12 x 1.75(M12) x 1.5(M14) x 1.5
M14 x 2(M16) x 1.5
M16 x 2(M18) x 1.5M18 x 2.5
(M20) x 1.5M20 x 2.5
(M22) x 2.5M24 x 3
(M27) x 3M30 x 3.5
(M33) x 3.5M36 x 4
M42 x 4.5M48 X5
Diameter Part No. CartonQty
MetricHex Nuts
9
` Price/100 Pcs
DEEPAKFASTENERS LIMITED
Toll Free: 1800 102 3911
- All material is bulk packed - Minimum order quantity is one carton for each size.
4663
105210480457560588
1,048998
1,4171,3502,2852,1752,8502,7103,3124,6147,903
11,00914,92420,39133,74846,395
1. Specifications Generally conforming to IS2016No guarantee can given for DFL products which are plated by users or by outside plates, 2. Plating
who may not have considered hydrogen embrittlement problem.10% will be Charged Extra For Zinc Cr3+Plating
GST extra as applicable.3. Pricing
Specialized Coatings
4mm5mm6mm8mm
10mm12mm14mm16mm18mm20mm22mm24mm27mm30mm33mm36mm42mm48mm
160008000800060004000300016001600160012001200
600400400300200100100
787853787854787855787856628850561034787857561035561051561030561033561036561031561032561037561038561040561042
Diameter Part No. ` Price/100 Pcs
CartonQty
MetricPlain Washer
10
DEEPAKFASTENERS LIMITED
The product's life and quality is measured not only by its grades and standards but
also by its finish, which prevents it from rusting and adds strength to the material.
Deepak Fasteners offers a wide range of generic and proprietary
coating to meet exacting customer requirements. In-house
capability includes Zinc / Zinc-Nickel Electroplating, Geomet,
Mechanical Galvanizing, Delta Dorken, Hot Dip Galvanizing,
PTFE, Unbrako Wiscoat.
Toll Free: 1800 102 3911
- All material is bulk packed - Minimum order quantity is one carton for each size.
26335587
161288396503655767815
1,4381,8842,3863,3554,0968,149
17,040
Direct Tension Indicator
The UNBRAKO Arc Welding Stud also known as shear connector is used in the construction of tall
buildings, bridges and steel structures. The drawn-arc process produces a full cross-sectional weld
forming a bond that is greater than the surrounding material. It improves the strength of the structure.
Product Range : Metric: M13, M16, M19, M22, M25 – Any Length
Inch: 1/2”, 5/8”, 3/4", 7/8”, 1” – Any Length
UNBRAKO Direct Tension Indicator also known as Auto Torque Indicator, are single-use mechanical load cells designed to indicate the magnitude of
preload in the assembly. It shows if the bolt is properly tensioned, very useful while tensioning
High Strength Structural Bolts.
Product Range : Metric: M16 – M36 as per BS EN 14399-9 Unbrako Feeler Gauge is available to check if the required torque is achieved.
Tension Control Structural Bolt
Unbrako Electric
Shear Wrench
Product Range : Metric: M12 – M30 (any length) – As Per BS EN 14399 - 10
Unbrako Electric Shear Wrench is also Available.
Tension Control Structural Bolt is an easy to install Heavy Duty Bolt used in Steel Frame Construction.
It has its own built-in torque control device. The outer socket of wrench rotates the nut until the
torque control groove in the spline shears off, thereby achieving proper bolt tension.
Rebar CouplerUnbrako Rebar Coupler Systems, also known as
Reinforcing bar couplers or coupler splicing connection, is a threaded sleeve that guarantees an ultimate tensile
strength of the splice (joint) greater than that of the parent bar. Coupler splicing system is suitable for
joining reinforcement bars end to end.
Product Range : Metric: 13mm to 57mm Bar Diameter
As per ASTM A615, ASTM A706, ASTM A775, ACI 318, ACI 349,A.A.S.H.T.O and UBC 1997.
Prices available on request. Contact Unbrako for further detail.
Unbrako provides complete equipment for bar-end preparation on site.
Download the Free Unbrako Fastener App for iPhone & Android at : www.unbrako.com
Arc Welding Stud
THE WORLD LEADER
Construction Fasteners
www.deepakfasteners.com [email protected]
Deepak Fasteners Limited
In Fasteners Engineering You Name It, We Have It
DFL8.8
-P09-0
10721
Copyr
ight
© 2
018 D
eepak
Fast
eners
Lim
ited. A
ll R
ights
Rese
rved.
UNBRAKO EUROPEDeepak Fasteners Shannon Ltd.Bays 25-30 Shannon Industrial Estate, County Clare, IrelandTel: +353-61-716-500, Fax: +353-61-716-584
UNBRAKO INDIADeepak Fasteners India Ltd.4th Floor, First Mall, Mall RoadLudhiana- 141001 (Pb.) IndiaTel: +91-161-5131111, 7131111 Fax: +91-161-2774400
UNBRAKO UKDeepak Fasteners UK Ltd.12-14 Tower Street, New Town Birmingham - B19 3RR, U.K.Tel: +44-121-333-4610, Fax: +44-121-333-4525
UNBRAKO LLC USA11939 Woodruff AveDowney, CA 90241 - USAToll Free: +1-888-456-9181, Tel: +1-562-674-3550,Fax: +1-213-402-2547