MATERIALS • Solid bronze or stainless steel hood. Aluminum is used
for painted finishes. Cast aluminum backplate ispainted to match hood finish.
• High transmission clear refractive acrylic lens.• Wood post is rough Western Red Cedar, unfinished.• Aluminum post with painted finish.
FINISHESNBZ Natural BronzeSSS Satin Stainless SteelSGB Semi-Gloss BlackSGW Semi-Gloss White
LAMPINGCF: 1-CF13DTTT, G24q base or 1-CF18WTTT, 2Gx24q.Lamps not included.LED: 1-11W LED array, 1550 lumens or 1-16W, 2120 lumens. Both are 3000K, 80+ CRI. LED arrays are included and easily changed.
BALLAST/DRIVERCF: Integral electronic HPF, 127/277V.LED: Integral HPF electronic driver, 120/277 volt, 0-10V dimming. 2-wire triac dimming available for 120V.
919-AL NEW
919-WD NEW
FEATURES• Classic wedge mounted to a wood or aluminum post.• Wood post is cedar and is for direct burial.• Aluminum post version is available for direct burial or base
plate mounting.
919 - WD Shown in Natural Bronze (“factory bright”) with Cedar post.
SGBZ Semi-Gloss BronzeSGS Semi-Gloss SilverCCP Custom Color Painted Finish
DOWNLIGHT BOLLARDWET LOCATION
COMPANIONS
718 921
M919-AL Shown with 4x4 aluminum post.
U P D AT E D 8 / 1 5
Manning Lighting Inc. Sheboygan, WI 53083 Phone: 920-458-2184 Web: manningltg.com Email: [email protected]
CAT# LAMPING VOLT FINISH- - - -
SPEC GUIDE
q 919 q CF/13q CF/18q LED/11q LED/16
q 120 q NBZ q SSSq SGBq SGWq SGBZq SGSq CCP
SAMPLE SPEC: 919-WD-LED/11-120-NBZ-36” OA
- POSTq AL-DBq AL-BPq WD
919-WD Showing power feed.
Base plate mounting detail.
919-WD
POST AND MOUNTING OPTIONS 919-WD: The wood post is a rough 4”x 6” cedar for directburial only. See photo above for power feed.
919-AL: The 3”x 6” aluminum post is available for directburial, specify AL-DB or for base plate mounting, specify AL-BP.
4"
6"
6"
VERI
FY
4" X 6" ROUGH CEDAR WOOD POST
VERI
FY
3" X 6" ALUM POST
CATALOG DRAWING
UL & IBEW LABELED DRY DAMP WET
TYPE
Information appearing hereon is proprietary and confidential and may not be used without the permission of Borden Lighting.
RBMY
PROJECT
999 Montague StreetSan Leandro, CA 94577510-357-0171 Fax 510-357-3832www.bordenlighting.com 919
CKDDWN
SPEC NO
DATE
SCALE
PROJECT SPEC
SPECIFIER
NOTE:
OA-q 36” STD
PHOTOMETRICS CF: Use LSI Report No. 26216 for model 720, using a 26W lamp. Adjust lumens accordingly.LED: Light Lab Report No LLI-15174-1 was tested with an 11W LED rated at 1350 lumens; new LED is 12W and is rated for 1550 lumens, or 17%. Adjust light levels accordingly.
919-AL-DB
SCALED REFERENCE
919
UL & IBEW LABELED DRY DAMP WET
TYPE
Information appearing hereon is proprietary and confidential and may not be used without the permission of Borden Lighting.
RBMY
PROJECT
999 Montague StreetSan Leandro, CA 94577510-357-0171 Fax 510-357-3832www.bordenlighting.com 919
CKDDWN
SPEC NO
DATE
SCALE
PROJECT SPEC
SPECIFIER
4"
6"
6"
VERI
FY
4" X 6" ROUGH CEDAR WOOD POST
VE
RIFY
3" X 6" ALUM POST
CATALOG DRAWING
UL & IBEW LABELED DRY DAMP WET
TYPE
Information appearing hereon is proprietary and confidential and may not be used without the permission of Borden Lighting.
RBMY
PROJECT
999 Montague StreetSan Leandro, CA 94577510-357-0171 Fax 510-357-3832www.bordenlighting.com 919
CKDDWN
SPEC NO
DATE
SCALE
PROJECT SPEC
SPECIFIER
NOTE:
4"
6"
6"
VERI
FY
4" X 6" ROUGH CEDAR WOOD POST
VERI
FY
3" X 6" ALUM POST
CATALOG DRAWING
UL & IBEW LABELED DRY DAMP WET
TYPE
Information appearing hereon is proprietary and confidential and may not be used without the permission of Borden Lighting.
RBMY
PROJECT
999 Montague StreetSan Leandro, CA 94577510-357-0171 Fax 510-357-3832www.bordenlighting.com 919
CKDDWN
SPEC NO
DATE
SCALE
PROJECT SPEC
SPECIFIER
NOTE:
919DOWNLIGHT BOLLARD
IBEW Labelled
Our fixtures are handcraftedhere in the USA using thehighest quality materials.
pendants
ceiling
int wall
ext wall
Manning Lighting Inc. Sheboygan, WI 53083 Phone: 920-458-2184 Web: manningltg.com Email: [email protected]