h

Communications tV Power hu /nsines

asc signal division

QSCSignal

9.3 Meter ESALike all ASC Signal earth station antennas, the 9.3 Meter Earth StationAntenna provides high gain and exceptional pattern characteristics.

Thisantenna system isdesigned toaddress the stringentrequirementsof both the television broadcast industry and telecommunicationsnetwork operators who demand unsurpassed flexibility and electricalperformance in high-quality, cost-effective, and reliable packages.

The electrical performance and exceptional versatility providesthe ability to configure the antenna with your choice of linearly- orcircularly- polarized 2- or 4- port combining networks. That versatilityis provided at the time of initial purchase, as well as in the future, asyour satellite communication requirements evolve.

This antenna system is used worldwide in broadcast applicationsand high density data, voice and communications networks. TheASC Signal 9.3 meter earth station antenna features a computer-optimized dual reflector Gregorian optics system and close-tolerancemanufacturing techniques.

This combination provides extremely accurate surface contourresulting in exceptionally high gain and closely controlled patterncharacteristics. ASC Signal earth station antennas provide maximumdurability with minimal maintenance.

earth stations

*

1 ;f

"M

Features

• Rugged aluminum and steel construction

• Horizon to horizon coverage with elevation overazimuth mount

• Advanced Gregorian optics

• Intelsat B compliant

1

PBESA93M.DAll designs, specifications, and availabilities ofproducts and services presented in this bulletinare subject to change without notice. (1016A)

© 2016 CPI ASC Signal Division

Communications tV Power Industries

asc signal division

QSCSignal

9.3 Meter ESADesign Standards

Reflector Aluminum painted with highly diffusive whitepaint

Ground Mount Hot-dipped galvanized steel, per ASTM-A123for structural steel.

Hardware Sizes < 3/8 in (9.5mm), stainless steel,passivated per MIL-F-14072-E300Sizes > 3/8 in (9.5mm), hot-dipped galvanizedstainless steel, passivated per ASTM-A123

Environmental Performances

Operating Temperature -40° to 52°C (-40° to 125°F)

Seismic (Earthquake) 1 G Vertical and Horizontal acceleration.Equivalent to a Richter Magnitude 8.3, andGrade 11 on the modified Mercalli Scale

Operational Winds 45 mph (72 km/h) Gusts to 65 mph (105 km/h)

Survival Winds 125 mph (200 km/h) in any position ofoperation

Rain 4 in (102 mm) per hour

Solar Radiation 360 BTU/hr/ft2 (1135 Watts/m2>

Relative Humidity 100%

Shock and Vibration As encountered by commercial Air, Rail andTruck shipment.

Atmospheric Conditions As encountered by Moderately CorrosiveCoastal and Industrial Areas.

earth stations

Mechanical PerformancesThe 9.3m Antenna mechanical general specifications and performances arelisted in below table. Additional information, dimensions and layout may beprovided by ASC Signal on a case-by-case basis.

Optics Type Dual Reflector GregorianReflector Material Precision-Formed AluminumReflector Segments 20Mount Type Az over El, Tripod mount

Antenna Pointing Range, Coarse/(Continuous)Elevation: 0-90°(90°)Azimuth: 180° (120°)Polarization 360° (180°)

Hub/Enclosure DimensionsDiameter 2.31m (84 in)

Depth 1.17m (46 in)

Shipping InformationPacking OptionsStandard Commercial Domestic Pack IncludedOcean Export Pack - For non-containerized,packed for seal against salt water spray

OCEANSHP-LG

Air Export Pack - For freighter aircraft shipments.Lower deck AirPack requires specialized bids

AIR EXPORT PACK-LG

Container Packaging CNTPCK-LG

Required Shipping ContainerStandard 20 ft land/sea container Quantity 1Standard 40 ft land/sea container Quantity 1

2

PBESA93M.DAll designs, specifications, and availabilities ofproducts and services presented in this bulletinare subject to change without notice. (1016A)

© 2016 CPI ASC Signal Division

earth stations<24L

2rwh<K2

<

C'omnumicalions & Ptnwr hu /nsincs

asc signal division

ascSignal

9.3 Meter ESADimensional Drawings

CenterPosition

(-60 TO +60)

Left Position(-90 TO +30)

Right Position(-30 TO +90)

31.1 ft9.3m

* N/ \

/ \/

\

\/

XI

Azimuth Pivot— Axis19.7 ft r6m .

/\

//

\/

\ //

\11.8 ft3.6m

Top View

Total AreaCovered

9.3m Component Position vs Elevation Angle

Elevation Angle (deg)

10.0 FT4— E4

(3.0 M) *A

ElevationPivot Axis

DA

&

Br*. (Nro vfrH

AAv V

35.0

30.0C

25.0

20.0B

-C

.5P 15.0 EOJx10.0

A5.0

0.02 3 5 6 7 8 9L

0 0 0 0 0 0 0 0 0 0

3

PBESA93M.DAll designs, specifications, and availabilities ofproducts and services presented in this bulletinare subject to change without notice. (1016A)

© 2016 CPI ASC Signal Division

<24u

m

2rwh<K2

<

Communications & Power Industries

asc signal division

QSCSignal

9.3 Meter ESATypical Foundation Design

i

-9 ft. 9 in.- -9 ft. 9 in.-

9 ft. 9 in -

9 ft. 9 in -

I

-I • 1

I

III

II

-4 ft. 7.5 in - -4 ft. 7.5 in.-

-5 ft. 11 in.

-5 ft. 11in.

.2 ft. 6 in.

Foundation information are provided in bulletin 37737C, please contact ASC Signal.

Soil Bearing Capacity, 2000 lb/ft2 (9770 kg/m2)Reinforcing Steel, 1.47 Tons (1339 kg)Concrete Compressive 3000 psi (211 kg/cm2

Strength,Foundation Size: (for specific standard soil and typical design)

Length 19.5 ft (5.94 m)Width 19.5 ft (5.94 m)Depth 2.5 ft (0.76 m)Concrete Volume 35.2 yd3 (27 m3)

NOTE: Other typical foundation designs are available. Soil borings and foundationanalysis should be performed by a qualified civil engineer.

earth stations

Typical Foundation Information

15ft(4.5m)

minimumclearance

I-

Note: Crane access is to beprovided within 40ft (12m)

ofPAD #3 (based on 15 ton

crane)

Assembly area for mount andantenna

PAD 1

PAD 3

Q PAD 2

2ft (0.6m)minimumclearance 15ft

(4.5m)minimumclearance

Azm = Azimuthdirection of mount

20ft (6m)minimumclearance

«-

30ft (9m) minimumclearance

on either side of foundationfor crane access

40ft (12m)

ro3

4

PBESA93M.DAll designs, specifications, and availabilities ofproducts and services presented in this bulletinare subject to change without notice. (1016A)

© 2016 CPI ASC Signal Division

m4

Dmm

mMir

r.

UI#

:!.•?**Iin-re

I5P^

LI

Communications & Power Industries

asc signal division

QSCSignal

9.3 Meter ESAMotor Drive Speed Summary

VariableAzimuth 0.05°/s 0.5°/sElevation 0.05°/s 0.5°/sPolarization 1°/s

MotorizationOne motorization system is available for this antenna: the NGC trackingsystem that can support Steptrack, Smartrack and Ephemeris orbital tracking.Motor KitAzimuth/Elevation Motor Kit NGC-MK9

Polarization Drive Kit (DC Step Motors)Standard Temperature (> -20°C) NGC-PK9DRA

Low Temperature operation (< -20°C) NGC-PK9DRA-LO

Outdoor Unit ControllerPower 200 - 230 VAC, 3 Phase 50/60 Hz NGC-ODU-208-5Power 380 - 460 VAC, 3 Phase 50/60 Hz NGC-ODU-380-5

Antenna controller, motorization and options are detailed in specific bulletins, please contactASC Signal..

Antenna ConfigurationsEarth Station AntennaMotorizable Mount with Az/EI Jackscrews. ES93-1

Intelsat Standard-B Compliant Earth Station AntennaMotorizable Mount with Az/EI Jackscrews. ES93B-1

earth stations

Motorization and NGC OptionsIndoorNGC-IDU NGC Rack Mounted Antenna Controller W/LCD

Touch PanelNGC-001NGC-002NGC-003NGC-RTX-2NGC-006NGC-007NGC-008NGC-009NGC-101NGC-102NGC-103NGC-104NGC-106NGC-107

NGC-IDU Analog Telephone ModemNGC-IDU Spectrum Analyzer Card, AnalogNGC-IDU DVB Receiver CardNGC IDU, L-Band Internal Beacon ReceiverNGC-IDU Emergency Stop ButtonNGC-IDU 10 Mhz Reference SourceNGC-IDU Redundant Power SupplyNGC-IDU Rack SlidesNGC-IDU Step Tracking SoftwareNGC-IDU Smartrack SoftwareNGC-IDU Predictive Track SoftwareNGC-IDU Full Tracking Capability SoftwareNGC-IDU Remote Access Software PackageNGC-IDU Spectrum Analyzer Enhanced UserInterface

NGC-108NGC-109NGC-111NGC-115NGC-ULPC-INTFCNGC-ULPC-INTFC-2NGC-119

Receive Pattern Test ToolRedundancy Control SoftwareSand/Dust Deviator FeatureUplink Power Control Software FunctionUplink Power Control System Single ChannelUplink Power Control System Dual ChannelNGC High Availability System Redundancy Software

OutdoorNGC-201NGC-202NGC-205NGC-206NGC-207NGC-211NGC-AESCRED11-X

NGC ODU Low Temperature Kit (-40 C)NGC ODU High Temperature Kit (+60 C)NGC ODU AC Polarization Drive InterfaceNGC Exterior Emergency Stop ButtonPre Movement Alert Warning Light And AnnouncatorDual Path NGC RedundancyEnvironmental System ControllerHub Mounted 1:1 LNA/LNB Redundancy Plate

RED12-X Hub Mounted 1:2 LNA/LNB Redundancy PlateAntenna controller, motorization and options are detailed in specific bulletins, please contactASC Signal..

5

PBESA93M.DAll designs, specifications, and availabilities ofproducts and services presented in this bulletinare subject to change without notice. (1016A)

© 2016 CPI ASC Signal Division

earth stations

C'ommunicalions tV rower Ituiitsihc

asc signal division

asCSigna

9.3 Meter ESAFeed MatrixC- BAND FEEDSYSTEMS2CLPNC-92CPNC-9-109

2CPNCR-9-109

2CPWCR-9-120

2LPNC-9

2LPNCR-92LPUC-9

2LPWC-9

2LPWCR

4CPNC-9-206

4CPNC-9B-206

4LPNC-9

4LPWWC-9

PORT Co-Pol

22

2

2

2

2

2

2

2

4

4

4

4

X XX X

X

X

X

X

X

X

X

X

X

X

RX 3.625 - RX 3.4 - 4.2 RX 4.5 - 4.8 TX 5.850 - TX 5.725 - TX 6.725 -4.2 GHz GHz GHz 6.425 GHz 6.725 GHz 7.025 GHz

XX

X

X

X

X

X

X

X

X

X

X

XX

X

X

X

X

X

X

X X

For redundant application, LNA support kits are available for each of the above feeds. Please contact ASC Signal.

6

PBESA93M.DAll designs, specifications, and availabilities ofproducts and services presented in this bulletinare subject to change without notice. (1016A)

© 2016 CPI ASC Signal Division

Communications tV Power Industries

asc signal division

QSCSignal

9.3 Meter ESAAntenna Options and SparesAnchor Bolt and Template Kits Options201680 Anchor Bolt Kit for 9.3 Meter Earth Station

Antennas with Tripod Mounts205883 Anchor Bolt Template for 9.3 Earth Station

Antennas with Tripod Mounts

Heating OptionsFH9A C-Band Feed Heater KitWEC93R-208-100 Electric Hot Air De-Ice System, 208 VAC, 3

PhaseWEC93R-380-100 Electric Hot Air De-Ice System, 380 VAC, 3

Phase

Hub Equipment OptionsEMRGYLT-115 Emergency Hub Light Kit, 115 VACEMRGYLT-230 Emergency Hub Light Kit, 230 VACFV9-115 Fan and Vent Kit, 115 VACFV9-220 Fan and Vent Kit, 230 VACHUBHTR-230 Antenna Hub Heater, 230 VACHUBLCNTR-115/240 Hub Power Center, 115/240 VACHUBLCNTR-230 Hub Power Center, 230 VACHUBLT-115 Hub Light Kit, 115 VACHUBLT-230 Hub Light Kit, 230 VAC

Safety OptionsANTGND-9 Foundation Installed Grounding KitLRK9 Lightning Rod KitMANPL9 Maintenance Platform and Ladder KitOBWRNLT-115 Obstruction Warning Light Kit, 115VACOBWRNLT-230 Obstruction Warning Light Kit, 230VAC

earth stations

Other Options201769 Elevation Handwheel Kit (2 required)209906-2 Lubrication and Maintenance Kit223711 Theodolite Alignment Kit (theodolite not incl)BRNG-7693-C Guard, Feed WindowFTST Feed System TestingNPN-LG Custom Color Painting for ReflectorSPCOL-FEED Custom Color Painting for FeedTK-MAN-LG Tool Kit, Large Manual AntennasTK-MOT-LG Tool Kit, Large Motorized Antennas

Azimuth and Elevation Cross Axis Waveguide Options1XAC-9 C-Band Cross Axis Waveguide Kit, 2-Port1XPC-9 C-Band Polarization Waveguide Kit, 2-Port2XAC-9 C-Band Cross Axis Waveguide Kit, 4-Port2XPC-9 C-Band Polarization Waveguide Kit, 4-Port2XPC-9B C-Band Polarization Waveguide Kit, 4-Port for

Std “B” Station

7

PBESA93M.DAll designs, specifications, and availabilities ofproducts and services presented in this bulletinare subject to change without notice. (1016A)

© 2016 CPI ASC Signal Division